Commit Graph

1192 Commits

Author SHA1 Message Date
наб feb04e6680 Forbid basename(3) and dirname(3)
There are at least two interpretations of basename(3),
in addition to both functions being allowed to /both/ return a static
buffer (unsuitable in multi-threaded environments) /and/ raze the input
(which encourages overallocations, at best)

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12105
2021-06-11 09:10:21 -07:00
наб 64dfdaba37 libzutil: import: filter out unsuitable files earlier
Only accept the right type of file, if available, and reject too-small
files before opening them on Linux

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12105
2021-06-11 09:10:13 -07:00
наб bf80fb53f5 linux/libzutil: zpool_open_func: don't dup name, extract untouchables
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12105
2021-06-11 09:10:09 -07:00
наб 0854d4c186 libzutil: add zfs_{base,dir}name()
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12105
2021-06-11 09:10:05 -07:00
наб 3aa81a6635 linux/libzutil: use ARRAY_SIZE instead of constant for search paths
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12105
2021-06-11 09:10:00 -07:00
Alexander Motin 371f88d96f
Remove pool io kstats (#12212)
This mostly reverts "3537 want pool io kstats" commit of 8 years ago.

From one side this code using pool-wide locks became pretty bad for
performance, creating significant lock contention in I/O pipeline.
From another, there are more efficient ways now to obtain detailed
statistics, while this statistics is illumos-specific and much less
usable on Linux and FreeBSD, reported only via procfs/sysctls.

This commit does not remove KSTAT_TYPE_IO implementation, that may
be removed later together with already unused KSTAT_TYPE_INTR and
KSTAT_TYPE_TIMER.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12212
2021-06-10 08:27:33 -07:00
Rich Ercolani 860051f1d1
Added error for writing to /dev/ on Linux
Starting in Linux 5.10, trying to write to /dev/{null,zero} errors out.
Prefer to inform people when this happens rather than hoping they guess
what's wrong.

Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes:  #11991
2021-06-09 18:57:57 -06:00
наб 327c904615 lib{efi,avl,share,tpool,zfs_core,zfsbootenv,zutil}: -fvisibility=hidden
No symbols affected in libavl
No symbols affected by libtpool, but pre-ANSI declarations got purged
No symbols affected by libzfs_core
No symbols affected by libzfs_bootenv

libefi got cleaned, gained efi_debug documentation in efi_partition.h,
and removes one undocumented and unused symbol from libzfs_core:
  D default_vtoc_map

libnvpair saw removal of these symbols:
  D nv_alloc_nosleep_def
  D nv_alloc_sleep
  D nv_alloc_sleep_def
  D nv_fixed_ops_def
  D nvlist_hashtable_init_size
  D nvpair_max_recursion

libshare saw removal of these symbols from libzfs:
  T libshare_nfs_init
  T libshare_smb_init
  T register_fstype
  B smb_shares

libzutil saw removal of these internal symbols from libzfs_core:
  T label_paths
  T slice_cache_compare
  T zpool_find_import_blkid
  T zpool_open_func
  T zutil_alloc
  T zutil_strdup

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12191
2021-06-09 17:04:32 -07:00
наб d406a695c6 libefi: remove efi_auto_sense()
It's present (but undocumented) in the illumos gate and used exclusively
by rmformat(1) (which I recommend as a nice blast from the past),
and also the math assumes 512B sectors and is therefore wrong

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12191
2021-06-09 17:03:42 -07:00
Alan Somers 75b4cbf625
libzfs: On FreeBSD, use MNT_NOWAIT with getfsstat
`getfsstat(2)` is used to retrieve the list of mounted file systems,
which libzfs uses when fetching properties like mountpoint, atime,
setuid, etc.  The `mode` parameter may be `MNT_NOWAIT`, which uses
information in the VFS's cache, or `MNT_WAIT`, which effectively does a
`statfs` on every single mounted file system in order to fetch the most
up-to-date information.  As far as I can tell, the only fields that
libzfs cares about are the filesystem's name, mountpoint, fstypename,
and mount flags.  Those things are always updated on mount and unmount,
so they will always be accurate in the VFS's mount cache except in two
circumstances:

1) When a file system is busy unmounting
2) When a ZFS file system changes the value of a mount-overridable
   property like atime or setuid, but doesn't remount the file system.
   Right now that only happens when the property is changed by an
   unprivileged user who has delegated authority to change the property
   but not to mount the dataset.  But perhaps libzfs could choose to do
   it for other reasons in the future.

Switching to `MNT_NOWAIT` will greatly improve speed with no downside,
as long as we explicitly update the mount cache whenever we change a
mount-overridable property.

For comparison, Illumos gets this information using the native
`getmntany` and `getmntent` functions, which also use cached
information.  The illumos function that would refresh the cache,
`resetmnttab`, is never called by libzfs.

And on GNU/Linux, `getmntany` and `getmntent` don't even communicate
with the kernel directly.  They simply parse the file they are given,
which is usually /etc/mtab or /proc/mounts.  Perhaps the implementation
of /proc/mounts is synchronous, ala MNT_WAIT; I don't know.

Sponsored-by:	Axcient
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alan Somers <asomers@gmail.com>
Closes: #12091
2021-06-08 07:36:43 -06:00
наб 4ff49c5a06 libzfs: zfs_send: remove unused variable
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12187
2021-06-07 20:58:28 -07:00
наб 77f3b67520 libzutil: zpool_find_config: remove unused variable
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12187
2021-06-07 20:58:10 -07:00
Alexander Motin ea400129c3
More aggsum optimizations
- Avoid atomic_add() when updating as_lower_bound/as_upper_bound.
Previous code was excessively strong on 64bit systems while not
strong enough on 32bit ones.  Instead introduce and use real
atomic_load() and atomic_store() operations, just an assignments
on 64bit machines, but using proper atomics on 32bit ones to avoid
torn reads/writes.

 - Reduce number of buckets on large systems.  Extra buckets not as
much improve add speed, as hurt reads.  Unlike wmsum for aggsum
reads are still important.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12145
2021-06-07 09:02:47 -07:00
наб e5e76bd643
libzfs: write_inuse_diffs_one: format strerror() with "%s"
Fixes 50353dbd ("Let zfs diff be more  permissive") which accidentally
introduced a build warning.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12197
2021-06-04 16:04:37 -07:00
Rich Ercolani 50353dbd05
Let zfs diff be more permissive
In the current world, `zfs diff` will die on certain kinds of errors
that come up on ordinary, not-mangled filesystems - like EINVAL,
which can come from a file with multiple hardlinks having the one
whose name is referenced deleted.

Since it should always be safe to continue, let's relax about all
error codes - still print something for most, but don't immediately
abort when we encounter them.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12072
2021-06-04 15:00:39 -06:00
Ryan Moeller 1f8e5b6cb8
Fix error check in nvlist_print_json_string
Move check for errors from mbrtowc() into the loop.  The error values
are not actually negative, so we don't break out of the loop when they
are encountered.

Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12175
Closes #12176
2021-06-04 13:53:44 -06:00
наб 739cfb965b libzfs: convert to -fvisibility=hidden
Also mark all printf-like funxions in libzfs_impl.h as printf-like
and add --no-show-locs to storeabi, in hopes diffs will make more sense
in future

This removes these symbols from libzfs:
  D nfs_only
  T SHA256Init
  T SHA2Final
  T SHA2Init
  T SHA2Update
  T SHA384Init
  T SHA512Init
  D share_all_proto
  D smb_only
  T zfs_is_shared_proto
  W zpool_mount_datasets
  W zpool_unmount_datasets

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12048
2021-06-03 13:17:55 -07:00
наб e00aae4be2 libefi: efi_get_devname: don't allocate procfs path
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12048
2021-06-03 13:17:49 -07:00
наб eefaa55f64 libzfs: don't distribute libzfs_impl.h
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12048
2021-06-03 13:17:35 -07:00
наб 94f942c658
libspl: staticify buf and pagesize, rename aok to libspl_assert_ok
Exporting names this short can easily cause nasty collisions with user code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12050
2021-06-03 11:04:13 -06:00
Colm f97142c748
A couple of small style cleanups
In `zpool_load_compat()`:

  * initialize `l_features[]` with a loop rather than a static
    initializer.

  * don't redefine system constants; use private names instead

Rationale here:

When an array is initialized using a static {foo}, only the specified
members are initialized to the provided values, the rest are
initialized to zero. While B_FALSE is of course zero, it feels
unsafe to rely on this being true forever, so I'm inclined to sacrifice
a few microseconds of runtime here and initialize using a loop.

When looking for the correct combination of system constants to use
(in open() and mmap()), I prefer to use private constants rather than
redefining system ones; due to the small chance that the system
ones might be referenced later in the file. So rather than defining
O_PATH and MAP_POPULATE, I use distinct constant names.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #12156
2021-06-03 09:13:42 -06:00
Ryan Moeller e1af0d0d73
libzfs_core: Fix some style violations
Made function names start on a new line. Added a blank line between
functions. This helps when grepping for functions.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12137
2021-06-01 15:13:26 -06:00
наб 757df52928 libzfs: add zfs_get_underlying_type. Stop including libzfs_impl.h in cmd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12116
2021-05-29 14:26:38 -07:00
наб f00f469052 libzfs: format safety
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12116
2021-05-29 14:26:25 -07:00
Alexander Motin 86706441a8
Introduce write-mostly sums
wmsum counters are a reduced version of aggsum counters, optimized for
write-mostly scenarios.  They do not provide optimized read functions,
but instead allow much cheaper add function.  The primary usage is
infrequently read statistic counters, not requiring exact precision.

The Linux implementation is directly mapped into percpu_counter KPI.
The FreeBSD implementation is directly mapped into counter(9) KPI.
In user-space due to lack of better implementation mapped to aggsum.

Unfortunately neither Linux percpu_counter nor FreeBSD counter(9)
provide sufficient functionality to completelly replace aggsum, so
it still remains to be used for several hot counters.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12114
2021-05-27 14:27:29 -06:00
Rich Ercolani 0bb736ce0b
Reinstate the old zpool read label logic as a fallback
In case of AIO failure, we should probably fallback to the old
behavior and still work.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12032
Closes #12040
2021-05-26 22:07:31 -07:00
наб 31f4c8cb19 linux/libzutil: zfs_path_order: remove strtok
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12094
2021-05-26 14:50:52 -07:00
наб 2a8c606082 libzutil: zfs_resolve_shortname: remove strtok
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12094
2021-05-26 14:50:46 -07:00
наб 91d6780671 libzutil: zfs_strcmp_shortname: remove strtok
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12094
2021-05-26 14:50:41 -07:00
наб 2fdd61a30b libzutil: zfs_strcmp_pathname: don't allocate, remove strtok
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12094
2021-05-26 14:50:35 -07:00
наб a0cb347cea libzfs_core: fini: don't check for refcount twice
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12094
2021-05-26 14:50:08 -07:00
наб 671ea40f62
freebsd/libzfs: import execvPe() from FreeBSD 13
It allocates less and properly deals with argv={NULL}

With minor cosmetic changes to match cstyle, remove whitespace damage,
and restore direct string printing

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12051
2021-05-26 11:03:47 -06:00
наб 5d1a32a542 linux/libshare: smb: don't leak share name in smb_disable_share_one()
Fixes: 645fb9cc21 "Implemented sharing datasets via SMB using libshare"

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12015
2021-05-21 10:16:18 -07:00
наб 93ef500388 Don't abuse vfork()
According to POSIX.1, "vfork() has the same effect as fork(2),
except that the behavior is undefined if the process created by vfork()
either modifies any data other than a variable of type pid_t
used to store the return value from vfork(), [...],
or calls any other function before successfully calling _exit(2)
or one of the exec(3) family of functions."

These do all three, and work by pure chance
(or maybe they don't, but we blisfully don't know).
Either way: bad idea to call vfork() from C,
unless you're the standard library, and POSIX.1-2008 removes it entirely

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12015
2021-05-21 10:16:06 -07:00
наб 5da6353987 libzfs: run_process: don't leak fd on reopen failure
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12082
2021-05-21 09:49:05 -07:00
наб 7c20ceebdd libzfs: run_process: reuse line, don't leak it
line will grow as wide as it needs (glibc starts off at 120),
we can store a narrower view; this also fixes leaks in a few scenarios

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12082
2021-05-21 09:48:59 -07:00
наб 30dadd5c04 libzfs: run_process: set O_NONBLOCK on lines pipe
Without this, we can deadlock: the child is stuck writing to the pipe,
and we are stuck waiting on the child

With this, we the child fills up the pipe (a few hundred kBish)
and starts getting EAGAINs, which allows it to either crash
or ignore them

libzfs_run_process_get_stdout*() is used only by zpool -c scripts,
which output short runs of K=V pairs, so the likelihood of losing
legitimate data there is relatively low

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12082
2021-05-21 09:47:53 -07:00
Ryan Moeller 099ca8186b FreeBSD: Don't force xattr mount option
The kernel will use the xattr property by default when not overridden
by a mount option.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11997
2021-05-13 15:13:20 -07:00
наб 37086897b0
libzfs: add keylocation=https://, backed by fetch(3) or libcurl
Add support for http and https to the keylocation properly to
allow encryption keys to be fetched from the specified URL.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #9543
Closes #9947 
Closes #11956
2021-05-12 21:21:35 -07:00
наб 2babd20045 libzfs: zfs_asprintf(): don't return undefined pointer
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11993
2021-05-08 09:37:40 -07:00
наб 87b671f3ac libzfsbootenv: lzbe_set_boot_device(): don't free undefined pointer
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11993
2021-05-08 09:27:53 -07:00
наб c493943404 zfs_get_enclosure_sysfs_path(): don't free undefined pointer
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11993
2021-05-08 09:25:59 -07:00
наб 8dfb9e57c7 zfs_get_enclosure_sysfs_path(): don't leak dev path
Also always free tmp2 at the end

Before:
nabijaczleweli@tarta:~/uwu$ valgrind --leak-check=full ./blergh
==8947== Memcheck, a memory error detector
==8947== Using Valgrind-3.14.0 and LibVEX
==8947== Command: ./blergh
==8947==
(null)
==8947==
==8947== HEAP SUMMARY:
==8947==     in use at exit: 23 bytes in 1 blocks
==8947==   total heap usage: 3 allocs, 2 frees, 1,147 bytes allocated
==8947==
==8947== 23 bytes in 1 blocks are definitely lost in loss record 1 of 1
==8947==    at 0x483577F: malloc (vg_replace_malloc.c:299)
==8947==    by 0x48D74B7: vasprintf (vasprintf.c:73)
==8947==    by 0x48B7833: asprintf (asprintf.c:35)
==8947==    by 0x401258: zfs_get_enclosure_sysfs_path
                         (zutil_device_path_os.c:191)
==8947==    by 0x401482: main (blergh.c:107)
==8947==
==8947== LEAK SUMMARY:
==8947==    definitely lost: 23 bytes in 1 blocks
==8947==    indirectly lost: 0 bytes in 0 blocks
==8947==      possibly lost: 0 bytes in 0 blocks
==8947==    still reachable: 0 bytes in 0 blocks
==8947==         suppressed: 0 bytes in 0 blocks
==8947==
==8947== For counts of detected and suppressed errors, rerun with: -v
==8947== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)

nabijaczleweli@tarta:~/uwu$ sed -n 191p zutil_device_path_os.c
        tmpsize = asprintf(&tmp1, "/sys/block/%s/device", dev_name);

After:
nabijaczleweli@tarta:~/uwu$ valgrind --leak-check=full ./blergh
==9512== Memcheck, a memory error detector
==9512== Using Valgrind-3.14.0 and LibVEX
==9512== Command: ./blergh
==9512==
(null)
==9512==
==9512== HEAP SUMMARY:
==9512==     in use at exit: 0 bytes in 0 blocks
==9512==   total heap usage: 3 allocs, 3 frees, 1,147 bytes allocated
==9512==
==9512== All heap blocks were freed -- no leaks are possible
==9512==
==9512== For counts of detected and suppressed errors, rerun with: -v
==9512== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11993
2021-05-08 09:24:57 -07:00
наб 68ebbd9a93 libzfs: zpool_load_compat(): don't free undefined pointers
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11993
2021-05-08 09:19:20 -07:00
наб 8bc357ba92 libzfs: zpool_load_compat(): open feature file cloexec
As a bonus, this also passes the open flags into the open flags instead
of the mode (it worked by accident because O_RDONLY is 0),
correctly detects a failed map,
and prefaults the entire file since we're always writing to every page

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11993
2021-05-08 09:16:26 -07:00
Matthew Ahrens 610cb4fb8c
undocumented libzfs API changes broke "zfs list"
While OpenZFS does permit breaking changes to the libzfs API, we should
avoid these changes when reasonably possible, and take steps to mitigate
the impact to consumers when changes are necessary.

Commit e4288a8397 made a libzfs API change that is especially
difficult for consumers because there is no change to the function
signatures, only to their behavior.  Therefore, consumers can't notice
that there was a change at compile time.  Also, the API change was
incompletely and incorrectly documented.

The commit message mentions `zfs_get_prop()` [sic], but all callers of
`get_numeric_property()` are impacted: `zfs_prop_get()`,
`zfs_prop_get_numeric()`, and `zfs_prop_get_int()`.

`zfs_prop_get_int()` always calls `get_numeric_property(src=NULL)`, so
it assumes that the filesystem is not mounted.  This means that e.g.
`zfs_prop_get_int(ZFS_PROP_MOUNTED)` always returns 0.

The documentation says that to preserve the previous behavior, callers
should initialize `*src=ZPROP_SRC_NONE`, and some callers were changed
to do that.  However, the existing behavior is actually preserved by
initializing `*src=ZPROP_SRC_ALL`, not `NONE`.

The code comment above `zfs_prop_get()` says, "src: ... NULL will be
treated as ZPROP_SRC_ALL.".  However, the code actually treats NULL as
ZPROP_SRC_NONE.  i.e. `zfs_prop_get(src=NULL)` assumes that the
filesystem is not mounted.

There are several existing calls which use `src=NULL` which are impacted
by the API change, most noticeably those used by `zfs list`, which now
assumes that filesystems are not mounted.  For example,
`zfs list -o name,mounted` previously indicated whether a filesystem was
mounted or not, but now it always (incorrectly) indicates that the
filesystem is not mounted (`MOUNTED: no`).  Similarly, properties that
are set at mount time are ignored.  E.g. `zfs list -o name,atime` may
display an incorrect value if it was set at mount time.

To address these problems, this commit reverts commit e4288a8397bb1f:
"zfs get: don't lookup mount options when using "-s local""

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11999
2021-05-06 11:24:56 -07:00
наб 1a7d7182ac libzutil: fix dm_get_underlying_path() return if not a DM device
For example, this would happily return "/dev/(null)" for /dev/sda1

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11935
2021-04-30 15:04:19 -07:00
Alan Somers e4288a8397
zfs get: don't lookup mount options when using "-s local"
Looking up mount options can be very expensive on servers with many
mounted file systems.  When doing "zfs get" with any "-s" option that
does not include "temporary", the mount list will never be used.  This
commit optimizes for that case.

This is a breaking commit for libzfs!  Callers of zfs_get_prop are now
required to initialize src.  To preserve existing behavior, they should
initialize it to ZPROP_SRC_NONE.

Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11955
2021-04-29 14:19:44 -07:00
Prawn b0269cd8ce
receive: don't fail inheriting (-x) properties on wrong dataset type
Receiving datasets while blanket inheriting properties like zfs 
receive -x mountpoint can generally be desirable, e.g. to avoid 
unexpected mounts on backup hosts.

Currently this will fail to receive zvols due to the mountpoint 
property being applicable to filesystems only.  This limitation 
currently requires operators to special-case their minds and tools 
for zvols.

This change gets rid of this limitation for inherit (-x) by
Spiting up the dataset type handling: Warnings for inheriting (-x), 
errors for overriding (-o).

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes #11416
Closes #11840
Closes #11864
2021-04-26 17:23:51 -07:00
наб dc3a56d38b libshare: nfs: commonify nfs_enable_share()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11886
2021-04-19 09:07:09 -07:00
наб 62866fc96c freebsd/libshare: nfs: make nfs_is_shared() thread-safe
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11886
2021-04-19 09:07:04 -07:00
наб 8357bbff1f libshare: nfs: commonify nfs_{init,fini}_tmpfile(), nfs_disable_share()
Also open the temp file cloexec

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11886
2021-04-19 09:06:57 -07:00
наб a3d387b31d libshare: nfs: commonify nfs_exports_[un]lock(), FILE_HEADER
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11886
2021-04-19 09:06:52 -07:00
наб 0f4d83117a libshare: nfs: don't leak nfs_lock_fd when lock fails
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11886
2021-04-19 09:06:31 -07:00
наб fef8bd41fc
libspl: implement atomics in terms of atomics
This replaces the generic libspl atomic.c atomics implementation
with one based on builtin gcc atomics.  This functionality was added
as an experimental feature in gcc 4.4.  Today even CentOS 7 ships
with gcc 4.8 as the default compiler we can make this the default.

Furthermore, the builtin atomics are as good or better than our
hand-rolled implementation so it's reasonable to drop that custom code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11904
2021-04-18 22:13:24 -07:00
наб a31ac10185 libzfs: refresh property cache after inheriting userprop
This matches what happens when inheriting a system property

Consider the following program:
	int main() {
		void *zhp = libzfs_init();
		void *dataset = zfs_open(zhp, "zest/__test", 1);

		printf("before:");
		dump_nvlist(zfs_get_user_props(dataset), 2);
		printf("\n");

		zfs_prop_inherit(dataset, "xyz.nabijaczleweli:test", 0);
		printf("after:");
		dump_nvlist(zfs_get_user_props(dataset), 2);
		printf("\n");

		zfs_refresh_properties(dataset);
		printf("refreshed:");
		dump_nvlist(zfs_get_user_props(dataset), 2);
		printf("\n");
	}

And the output before:
	# zfs set xyz.nabijaczleweli:test=hehe zest/__test
	# ./a.out
	before:  xyz.nabijaczleweli:test:
	      value: 'hehe'
	      source: 'zest/__test'

	after:  xyz.nabijaczleweli:test:
	      value: 'hehe'
	      source: 'zest/__test'

	refreshed:

As compared to the output after:
	# zfs set xyz.nabijaczleweli:test=hehe zest/__test
	# ./a.out
	before:  xyz.nabijaczleweli:test:
	      value: 'hehe'
	      source: 'zest/__test'

	after:
	refreshed:

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11064
Closes #11911
2021-04-17 12:39:54 -07:00
наб bfe8b9fff3 libzfs: don't mark prompt+raw as retriable
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11911
Closes #11031
2021-04-17 12:39:28 -07:00
наб a0978d15aa linux/libspl: gethostid: read from /proc/sys/kernel/spl/hostid, simplify
Fixes get_system_hostid() if it was set via the aforementioned sysctl
and simplifies the code a bit.  The kernel and user-space must agree,
after all.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11879
2021-04-15 14:55:47 -07:00
наб 2d14207c98 libspl: lift common bits of getexecname()
Merge the actual implementations of getexecname() and slightly clean
up the FreeBSD one.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11879
2021-04-15 14:55:40 -07:00
наб d197a150b4 libzfs: get rid of unused libzfs_handle::libzfs_{storeerr,chassis_id}
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11868
2021-04-13 14:15:06 -07:00
наб 533527725b libzfs: get rid of libzfs_handle::libzfs_mnttab
All users did a freopen() on it. Even some non-users did!
This is point-less ‒ just open the mtab when needed

If I understand Solaris' getextmntent(3C) correctly, the non-user
freopen()s are very likely an odd, twisted vestigial tail of that ‒
but it's got a completely different calling convention and caching
semantics than any platform we support

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11868
2021-04-13 14:14:44 -07:00
наб 74e48f470e linux/libspl: getextmntent(): don't leak mnttab FILE*
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11868
2021-04-13 14:14:44 -07:00
наб b3530c4262
libzfs: zfs_mount_at(): load key for encryption root if MS_CRYPT
zfs_crypto_load_key() only works on encryption roots,
and zfs mount -la would fail if it encounters a datasets that
is sorted before their encroots.

To trigger:
  truncate -s 40G /tmp/test
  dd if=/dev/urandom of=/tmp/k bs=128 count=1 status=none
  zpool create -O encryption=on -O keylocation=file:///tmp/k \
               -O keyformat=passphrase test /tmp/test
  zfs create -o mountpoint=/a test/a
  zfs create -o mountpoint=/b test/b
  zfs umount test
  zfs unload-key test
  zfs mount -la

The final mount errored out with:
  Key load error: Keys must be loaded for
    encryption root of 'test/a' (test).
  Key load error: Keys must be loaded for
    encryption root of 'test/b' (test).

And only /test was mounted

This technically breaks the libzfs API, but the previous behavior was
decidedly a bug.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11870 
Closes #11875
2021-04-12 21:26:55 -07:00
Prawn ee6615e07a
cmd/zfs receive: allow dry-run (-n) to check property args
zfs recv -n does not report some errors it could.  The code to bail 
out of the receive if in dry-run mode came a little early, skipping 
validation of cmdprops (recv -x and -o) among others.  Move the
check down to enable these additional checks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes #11862
2021-04-12 09:35:55 -07:00
наб 722b7f9a4c
libuutil: purge unused functions
Remove vestigial uu_open_tmp().  The problems with this implementation
are many, but the primary one is the TMPPATHFMT macro, which is
unused, and always has been.

Searching around for any users leads only to earlier imports of the
same, identical file, i.a. into an apple repository (which does patch
gethrtime() into it and gives us a copyright date of 2007),
and a MidnightBSD one from 2008.

Searching illumos-gate, uu_open_tmp appears, in current HEAD, three
times: in the header, libuutil's mapfile ABI, and the implementation.

This slowly grows up to eight occurrences as one moves back to the root
"OpenSolaris Launch" commit: the header, implementation, twice in
libuutil's spec ABI, twice (with multilib and non-multilib paths) in
libuutil.so's i386 and SPARC binary db ABIs.

That's 2005, and this file was abandonware even then, it's dead code.

The situation is similar for the uu_dprintf() family of functions and
uu_dump().  Nothing in accessibly recorded history has ever used them.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11873
2021-04-12 09:32:43 -07:00
Colm e086db1656
Improvements to the 'compatibility' property
Several improvements to the operation of the 'compatibility' property:

1) Improved handling of unrecognized features:
Change the way unrecognized features in compatibility files are handled.

 * invalid features in files under /usr/share/zfs/compatibility.d
   only get a warning (as these may refer to future features not yet in
   the library),
 * invalid features in files under /etc/zfs/compatibility.d
   get an error (as these are presumed to refer to the current system).

2) Improved error reporting from zpool_load_compat.
Note: slight ABI change to zpool_load_compat for better error reporting.

3) compatibility=legacy inhibits all 'zpool upgrade' operations.

4) Detect when features are enabled outside current compatibility set
   * zpool set compatibility=foo <-- print a warning
   * zpool set feature@xxx=enabled <-- error
   * zpool status <-- indicate this state

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #11861
2021-04-12 09:08:56 -07:00
Brian Behlendorf 4ef03d077c Update libzfs.abi for zfs_send() change
Commit 099fa7e4 intentionally modified the libzfs ABI.  However, it
failed to include an update for the libzfs.abi file.  This commit
resolves the `make checkabi` warning due to that omission.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11710
2021-04-11 17:06:54 -07:00
наб 10b575d04c lib/: set O_CLOEXEC on all fds
As found by
  git grep -E '(open|setmntent|pipe2?)\(' |
    grep -vE '((zfs|zpool)_|fd|dl|lzc_re|pidfile_|g_)open\('

FreeBSD's pidfile_open() says nothing about the flags of the files it
opens, but we can't do anything about it anyway; the implementation does
open all files with O_CLOEXEC

Consider this output with zpool.d/media appended with
"pid=$$; (ls -l /proc/$pid/fd > /dev/tty)":
  $ /sbin/zpool iostat -vc media
  lrwx------ 0 -> /dev/pts/0
  l-wx------ 1 -> 'pipe:[3278500]'
  l-wx------ 2 -> /dev/null
  lrwx------ 3 -> /dev/zfs
  lr-x------ 4 -> /proc/31895/mounts
  lrwx------ 5 -> /dev/zfs
  lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media
vs
  $ ./zpool iostat -vc vendor,upath,iostat,media
  lrwx------ 0 -> /dev/pts/0
  l-wx------ 1 -> 'pipe:[3279887]'
  l-wx------ 2 -> /dev/null
  lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11866
2021-04-11 15:45:59 -07:00
наб 92ffd87aaf libzfs{,_core}: set O_CLOEXEC on persistent (ZFS_DEV and MNTTAB) fds
These were fd 3, 4, and 5 by the time zfs change-key hit
execute_key_fob()

glibc appends "e" to setmntent() mode, but musl's just returns fopen()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11866
2021-04-11 15:45:31 -07:00
наб 0fc401a7ef libzfs: zfs_crypto_create() requires a new key by definition: set newkey
This changes the password prompt for new encryption roots from
  Enter passphrase:
  Re-enter passphrase:
to
  Enter new passphrase:
  Re-enter new passphrase:
which makes more sense and is more consistent with "new passphrase"
now always meaning "come up with something" and plain "passphrase"
"remember that thing"

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11866
2021-04-11 15:44:54 -07:00
наб e568853f96 libzfs_crypto.c: remove unused key_locator enum
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11866
2021-04-11 15:43:15 -07:00
pablofsf 099fa7e475
Allow zfs to send replication streams with missing snapshots
A tentative implementation and discussion was done in #5285.
According to it a send --skip-missing|-s flag has been added.
In a replication stream, when there are snapshots missing in
the hierarchy, if -s is provided print a warning and ignore
dataset (and its children) instead of throwing an error

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pablo Correa Gómez <ablocorrea@hotmail.com>
Closes #11710
2021-04-11 12:05:35 -07:00
matt-fidd a03b288cf0
zfs get -p only outputs 3 columns if "clones" property is empty
get_clones_string currently returns an empty string for filesystem
snapshots which have no clones. This breaks parsable `zfs get` output as
only three columns are output, instead of 4.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Fiddaman <github@m.fiddaman.uk>
Co-authored-by: matt <matt@fiddaman.net>
Closes #11837
2021-04-06 16:05:54 -07:00
наб 61b50107a5
libzutil: zfs_isnumber(): return false if input empty
zpool list, which is the only user, would mistakenly try to parse the
empty string as the interval in this case:

  $ zpool list "a"
  cannot open 'a': no such pool
  $ zpool list ""
  interval cannot be zero
  usage: <usage string follows>
which is now symmetric with zpool get:
  $ zpool list ""
  cannot open '': name must begin with a letter

Avoid breaking the  "interval cannot be zero" string.
There simply isn't a need for this, and it's user-facing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11841 
Closes #11843
2021-04-06 12:25:53 -07:00
Andrea Gelmini bf169e9f15 Fix various typos
Correct an assortment of typos throughout the code base.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #11774
2021-04-02 18:52:15 -07:00
Brian Behlendorf fe6babced2
Bump libzfs.so and libzpool.so versions
Bump the library versions as advised by the libtool guidelines.

https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html

Two new functions were added but no existing functions were changed,
so we increase the version and the age (version:revision:age).

Added functions (2):
- boolean_t zpool_is_draid_spare(const char *);
- zpool_compat_status_t zpool_load_compat(const char *,
      boolean_t *, char *, char *);

Additionally bump the libzpool.so version information.  This library
is for internal use but we still want to update the version to track
major changes to the interfaces.

The libzfsbootenv, libuutil, libnvpair and libzfs_core libraries
have not been updated.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11817
2021-04-01 16:53:05 -07:00
Matthew Ahrens b85f47efd0
When specifying raidz vdev name, parity count should match
When specifying the name of a RAIDZ vdev on the command line, it can be
specified as raidz-<vdevID> or raidzP-<vdevID>.
e.g. `zpool clear poolname raidz-0` or `zpool clear poolname raidz2-0`

If the parity is specified in the vdev name, it should match the actual
parity of that RAIDZ vdev, otherwise the command should fail.  This
commit makes it so.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Stuart Maybee <stuart.maybee@comcast.net>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11742
2021-03-26 11:12:22 -07:00
Jessica Clarke ef977fce66
Support running FreeBSD buildworld on Arm-based macOS hosts
Arm-based Macs are like FreeBSD and provide a full 64-bit stat from the
start, so have no stat64 variants. Thus, define stat64 and fstat64 as
aliases for the normal versions.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Closes #11771
2021-03-26 10:45:12 -07:00
Andrea Gelmini 8a915ba1f6
Removed duplicated includes
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #11775
2021-03-22 12:34:58 -07:00
George Wilson 0936981d86
zpool import cachefile improvements
Importing a pool using the cachefile is ideal to reduce the time
required to import a pool. However, if the devices associated with
a pool in the cachefile have changed, then the import would fail.
This can easily be corrected by doing a normal import which would
then read the pool configuration from the labels.

The goal of this change is make importing using a cachefile more
resilient and auto-correcting. This is accomplished by having
the cachefile import logic automatically fallback to reading the
labels of the devices similar to a normal import. The main difference
between the fallback logic and a normal import is that the cachefile
import logic will only look at the device directories that were
originally used when the cachefile was populated. Additionally,
the fallback logic will always import by guid to ensure that only
the pools in the cachefile would be imported.

External-issue: DLPX-71980
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #11716
2021-03-12 15:42:27 -08:00
Don Brady f5ada6538d
Return finer grain errors in libzfs unmount_one
Added errno mappings to unmount_one() in libzfs.  Changed do_unmount() 
implementation to return errno errors directly like is done for 
do_mount() and others.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #11681
2021-03-08 08:46:45 -08:00
James Wah 92fb29b9f9
Don't bomb out when using keylocation=file://
Avoid following the error path when the operation in fact succeeded.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: James Wah <james@laird-wah.net>
Closes #11651
2021-03-03 08:28:49 -08:00
Martin Matuška 03ef8f09e1
Add missing checks for unsupported features
After 35ec517 it has become possible to import ZFS pools witn an
active org.illumos:edonr feature on FreeBSD, leading to a panic.

In addition, "zpool status" reported all pools without edonr
as upgradable and "zpool upgrade -v" reported edonr in the list
of upgradable features.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes #11653
2021-02-27 17:16:02 -08:00
Cedric Maunoury b9c07ec71b
send_iterate_snap : doall send without fromsnap
The behavior of a NULL fromsnap was inadvertently changed for a doall
send when the send/recv logic in libzfs was updated.  Restore the
previous behavior by correcting send_iterate_snap() to include all
the snapshots in the nvlist for this case. 

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Cedric Maunoury <cedric.maunoury@gmail.com>
Closes #11608
2021-02-24 09:48:58 -08:00
Tony Hutter 7e56b05058
Better zfs_get_enclosure_sysfs_path() enclosure support
A multpathed disk will have several 'underlying' paths to the disk.  For
example, multipath disk 'dm-0' may be made up of paths:
/dev/{sda,sdb,sdc,sdd}.  On many enclosures those underlying sysfs
paths will have a symlink back to their enclosure device entry
(like 'enclosure_device0/slot1').  This is used by the
statechange-led.sh script to set/clear the fault LED for a disk, and
by 'zpool status -c'.

However, on some enclosures, those underlying paths may not all have
symlinks back to the enclosure device.  Maybe only two out of four
of them might.

This patch updates zfs_get_enclosure_sysfs_path() to favor returning
paths that have symlinks back to their enclosure devices, rather
than just returning the first path.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #11617
2021-02-20 20:17:45 -08:00
Christian Schwarz edc508ac0b libzpool: set_global_var: refactor to not modify 'arg'
Also fixes leak of the dlopen handle in the error case.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #11602
2021-02-19 22:45:04 -08:00
Christian Schwarz b5fffa1d29 libzpool: set_global_var: fix endianness handling (fixes zdb -o )
Without this patch I get the error

  Setting global variables is only supported on little-endian systems

when using `zdb -o` on my amd64 machine.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #11602
2021-02-19 22:44:05 -08:00
Ryan Moeller 64e0fe14ff
Restore FreeBSD resource usage accounting
Add zfs_racct_* interfaces for platform-dependent read/write accounting.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11613
2021-02-19 22:34:33 -08:00
Colm 658fb8020f
Add "compatibility" property for zpool feature sets
Property to allow sets of features to be specified; for compatibility
with specific versions / releases / external systems. Influences
the behavior of 'zpool upgrade' and 'zpool create'. Initial man
page changes and test cases included.

Brief synopsis:

zpool create -o compatibility=off|legacy|file[,file...] pool vdev...

compatibility = off : disable compatibility mode (enable all features)
compatibility = legacy : request that no features be enabled
compatibility = file[,file...] : read features from specified files.
Only features present in *all* files will be enabled on the
resulting pool. Filenames may be absolute, or relative to
/etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc
checked first).

Only affects zpool create, zpool upgrade and zpool status.

ABI changes in libzfs:

* New function "zpool_load_compat" to load and parse compat sets.
* Add "zpool_compat_status_t" typedef for compatibility parse status.
* Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum
* Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum

An initial set of base compatibility sets are included in
cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is
modified to install these in $pkgdatadir/compatibility.d and to
create symbolic links to a reasonable set of aliases.

Reviewed-by: ericloewe
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #11468
2021-02-17 21:30:45 -08:00
Alan Somers 6b2e7203ae
Fix a resource leak in uu_avl_pool_destroy
Need to destroy the pthread mutex created in uu_avl_pool_create.

https://svnweb.freebsd.org/base?view=revision&revision=262912

Obtained from: FreeBSD
Sponsored by:	Spectra Logic Corporation
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11528
2021-01-26 19:39:28 -08:00
Brian Behlendorf 0e6c493fec cppcheck: integrete cppcheck
In order for cppcheck to perform a proper analysis it needs to be
aware of how the sources are compiled (source files, include
paths/files, extra defines, etc).  All the needed information is
available from the Makefiles and can be leveraged with a generic
cppcheck Makefile target.  So let's add one.

Additional minor changes:

* Removing the cppcheck-suppressions.txt file.  With cppcheck 2.3
  and these changes it appears to no longer be needed.  Some inline
  suppressions were also removed since they appear not to be
  needed.  We can add them back if it turns out they're needed
  for older versions of cppcheck.

* Added the ax_count_cpus m4 macro to detect at configure time how
  many processors are available in order to run multiple cppcheck
  jobs.  This value is also now used as a replacement for nproc
  when executing the kernel interface checks.

* "PHONY =" line moved in to the Rules.am file which is included
  at the top of all Makefile.am's.  This is just convenient becase
  it allows us to use the += syntax to add phony targets.

* One upside of this integration worth mentioning is it now allows
  `make cppcheck` to be run in any directory to check that subtree.

* For the moment, cppcheck is not run against the FreeBSD specific
  kernel sources.  The cppcheck-FreeBSD target will need to be
  implemented and testing on FreeBSD to support this.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11508
2021-01-26 16:12:26 -08:00
Brian Behlendorf 6fc1ce0723 cppcheck: resolve double free
The double free reported for the realloc() failure branch is a
false positive.  It should be resolved in cppcheck 2.4 but for
the benefit of older versions we supress the warning.

    https://trac.cppcheck.net/ticket/9292

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11508
2021-01-26 16:12:02 -08:00
Alan Somers fd95af8dd4
Speed up "zpool import" in the presence of many zvols
By default, FreeBSD does not allow zpools to be backed by zvols (that
can be changed with the "vfs.zfs.vol.recursive" sysctl). When that
sysctl is set to 0, the kernel does not attempt to read zvols when
looking for vdevs. But the zpool command still does. This change brings
the zpool command into line with the kernel's behavior. It speeds "zpool
import" when an already imported pool has many zvols, or a zvol with
many snapshots.

https://svnweb.freebsd.org/base?view=revision&revision=357235
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=241083
https://reviews.freebsd.org/D22077

Obtained from: FreeBSD
Reported by: Martin Birgmeier <d8zNeCFG@aon.at>
Sponsored by: Axcient
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11502
2021-01-24 16:02:45 -08:00
Matt Macy 0e9bcd5d4f FreeBSD: fix HEAD build, conditionally remove FDSYNC defines
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11458
2021-01-23 15:39:55 -08:00
Brian Behlendorf 76e1f78d4b
Only add supported features during pool creation
When creating a pool only features supported by both user and
kernel space should be enabled.  Furthermore, improve the error
messages when attempting to create, or add, a dRAID vdev when
the dRAID feature is not supported by the kernel modules.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11492
2021-01-22 09:47:06 -08:00
Alan Somers 2d8f72d76c
zpool: speed up importing large pools (#11469)
The ZFS_IOC_POOL_TRYIMPORT ioctl returns an nvlist from the kernel to a
preallocated buffer in  userland.  Userland must guess how large the
buffer should be.  If it undersizes it, it must reallocate and try
again.  That can cost a lot of time for large pools.

OpenZFS commit 28b40c8a6e set the guess at "zc.zc_nvlist_conf_size * 4"
without explanation.  On my system, that is too small.  From experiment,
x 32 is a better multiplier.  But I don't know how to calculate it
theoretically.

Sponsored by:	Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by:	Alan Somers <asomers@gmail.com>
Closes #11469
2021-01-21 12:55:54 -08:00
Alan Somers e50b5217e7 libzutil: optimize zpool_read_label with AIO
Read all labels in parallel instead of sequentially.

Originally committed as
https://cgit.freebsd.org/src/commit/?id=b49e9abcf44cafaf5cfad7029c9a6adbb28346e8

Obtained from: FreeBSD
Sponsored by: Spectra Logic, Axcient
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11467
2021-01-21 11:24:35 -08:00
Alan Somers ec40ce8405 libzutil: don't read extraneous data in zpool_read_label
zpool_read_label doesn't need the full labels including uberblocks.  It
only needs the vdev_phys_t.  This reduces by half the amount of data
read to check for a label, speeding up "zpool import", "zpool
labelclear", etc.

Originally committed as
https://cgit.freebsd.org/src/commit/?id=63f8025d6acab1b334373ddd33f940a69b3b54cc

Obtained from: FreeBSD
Sponsored by: Spectra Logic Corp, Axcient
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11467
2021-01-21 11:18:32 -08:00
Brian Atkinson d0cd9a5cc6
Extending FreeBSD UIO Struct
In FreeBSD the struct uio was just a typedef to uio_t. In order to
extend this struct, outside of the definition for the struct uio, the
struct uio has been embedded inside of a uio_t struct.

Also renamed all the uio_* interfaces to be zfs_uio_* to make it clear
this is a ZFS interface.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #11438
2021-01-20 21:27:30 -08:00
Ryan Moeller 60a2434b29
libzfs_sendrecv: Use fnv* to verify nvlist/nvpair*
Use verified variants of nvlist/nvpair functions where applicable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11460
2021-01-14 09:53:09 -08:00
Matthew Ahrens b6722b871b nvlist leaked in zpool_find_config()
In `zpool_find_config()`, the `pools` nvlist is leaked.  Part of it (a
sub-nvlist) is returned in `*configp`, but the callers also leak that.

Additionally, in `zdb.c:main()`, the `searchdirs` is leaked.

The leaks were detected by ASAN (`configure --enable-asan`).

This commit resolves the leaks.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11396
2020-12-28 10:05:31 -08:00
Brian Behlendorf 1c2358c12a
Linux 5.10 compat: use iov_iter in uio structure
As of the 5.10 kernel the generic splice compatibility code has been
removed.  All filesystems are now responsible for registering a
->splice_read and ->splice_write callback to support this operation.

The good news is the VFS provided generic_file_splice_read() and
iter_file_splice_write() callbacks can be used provided the ->iter_read
and ->iter_write callback support pipes.  However, this is currently
not the case and only iovecs and bvecs (not pipes) are ever attached
to the uio structure.

This commit changes that by allowing full iov_iter structures to be
attached to uios.  Ever since the 4.9 kernel the iov_iter structure
has supported iovecs, kvecs, bvevs, and pipes so it's desirable to
pass the entire thing when possible.  In conjunction with this the
uio helper functions (i.e uiomove(), uiocopy(), etc) have been
updated to understand the new UIO_ITER type.

Note that using the kernel provided uio_iter interfaces allowed the
existing Linux specific uio handling code to be simplified.  When
there's no longer a need to support kernel's older than 4.9, then
it will be possible to remove the iovec and bvec members from the
uio structure and always use a uio_iter.  Until then we need to
maintain all of the existing types for older kernels.

Some additional refactoring and cleanup was included in this change:

- Added checks to configure to detect available iov_iter interfaces.
  Some are available all the way back to the 3.10 kernel and are used
  when available.  In particular, uio_prefaultpages() now always uses
  iov_iter_fault_in_readable() which is available for all supported
  kernels.

- The unused UIO_USERISPACE type has been removed.  It is no longer
  needed now that the uio_seg enum is platform specific.

- Moved zfs_uio.c from the zcommon.ko module to the Linux specific
  platform code for the zfs.ko module.  This gets it out of libzfs
  where it was never needed and keeps this Linux specific code out
  of the common sources.

- Removed unnecessary O_APPEND handling from zfs_iter_write(), this
  is redundant and O_APPEND is already handled in zfs_write();

Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11351
2020-12-18 08:48:26 -08:00
Ryan Libby c7500ded3e
FreeBSD libzfs: gcc requires __thread after static
Building libzfs with gcc on FreeBSD failed because gcc is picky about
the order of keywords in declarations with __thread, whereas clang is
more relaxed.

https://gcc.gnu.org/onlinedocs/gcc/Thread-Local.html

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Closes #11331
2020-12-14 09:28:24 -08:00
Attila Fülöp 0cb40fa389
zpool: Dryrun fails to list some devices
`zpool create -n` fails to list cache and spare vdevs.
`zpool add -n` fails to list spare devices.
`zpool split -n` fails to list `special` and `dedup` labels.
`zpool add -n` and `zpool split -n` shouldn't list hole devices.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #11122
Closes #11167
2020-12-04 14:04:39 -08:00
Antonio Russo d45267183f
libzfsbootenv: do not depend on libnvpair
We do not build libnvpair.pc.  Moreover, it is automatically pulled in
by libzfs.pc, so no additional specific dependency is required.

Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes #11227
2020-11-22 15:16:42 -08:00
Brian Behlendorf f1ece319fd
Include the ABI with dist tarball
The ABI should be included when generating the `make dist` tarball
since it's required by the `make checkabi` target.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11225
2020-11-21 10:44:52 -08:00
Brian Behlendorf 82611cdfe5 Add ABI snapshot
Add a snapshot of the current ABI using libabigail-1.7-2.  The
included ABI passes `make checkabi` for CentOS 7, Fedora 33,
Debian 10, and Ubuntu 20.04.  This covers a fairly wide range
of glibc, gcc, and libabigail versions plus other changes which
are platform specific.

Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11144
2020-11-17 09:21:39 -08:00
Antonio Russo 14c34c3d49 Library ABI tracking with abigail
Provide two make targets: checkabi and storeabi.

storeabi uses libabigail to generate a reference copy of the ABI for the
public libraries.

checkabi compares such a reference to the compiled version, failing if
they are not compatible.  No ABI is generated for libzpool.so, it is
only used by ztest and zdb and not external consumers.

Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes #11144
2020-11-17 09:18:52 -08:00
наб e6c59cd171 zpool: correctly align columns with -p
zpool_expand_proplist() now ignores pl_fixed if its new literal
argument is true.  The rest is a consequence of needing to pass
that down.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiao?=~Dska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11202
2020-11-16 09:26:20 -08:00
Brian Behlendorf b2255edcc0
Distributed Spare (dRAID) Feature
This patch adds a new top-level vdev type called dRAID, which stands
for Distributed parity RAID.  This pool configuration allows all dRAID
vdevs to participate when rebuilding to a distributed hot spare device.
This can substantially reduce the total time required to restore full
parity to pool with a failed device.

A dRAID pool can be created using the new top-level `draid` type.
Like `raidz`, the desired redundancy is specified after the type:
`draid[1,2,3]`.  No additional information is required to create the
pool and reasonable default values will be chosen based on the number
of child vdevs in the dRAID vdev.

    zpool create <pool> draid[1,2,3] <vdevs...>

Unlike raidz, additional optional dRAID configuration values can be
provided as part of the draid type as colon separated values. This
allows administrators to fully specify a layout for either performance
or capacity reasons.  The supported options include:

    zpool create <pool> \
        draid[<parity>][:<data>d][:<children>c][:<spares>s] \
        <vdevs...>

    - draid[parity]       - Parity level (default 1)
    - draid[:<data>d]     - Data devices per group (default 8)
    - draid[:<children>c] - Expected number of child vdevs
    - draid[:<spares>s]   - Distributed hot spares (default 0)

Abbreviated example `zpool status` output for a 68 disk dRAID pool
with two distributed spares using special allocation classes.

```
  pool: tank
 state: ONLINE
config:

    NAME                  STATE     READ WRITE CKSUM
    slag7                 ONLINE       0     0     0
      draid2:8d:68c:2s-0  ONLINE       0     0     0
        L0                ONLINE       0     0     0
        L1                ONLINE       0     0     0
        ...
        U25               ONLINE       0     0     0
        U26               ONLINE       0     0     0
        spare-53          ONLINE       0     0     0
          U27             ONLINE       0     0     0
          draid2-0-0      ONLINE       0     0     0
        U28               ONLINE       0     0     0
        U29               ONLINE       0     0     0
        ...
        U42               ONLINE       0     0     0
        U43               ONLINE       0     0     0
    special
      mirror-1            ONLINE       0     0     0
        L5                ONLINE       0     0     0
        U5                ONLINE       0     0     0
      mirror-2            ONLINE       0     0     0
        L6                ONLINE       0     0     0
        U6                ONLINE       0     0     0
    spares
      draid2-0-0          INUSE     currently in use
      draid2-0-1          AVAIL
```

When adding test coverage for the new dRAID vdev type the following
options were added to the ztest command.  These options are leverages
by zloop.sh to test a wide range of dRAID configurations.

    -K draid|raidz|random - kind of RAID to test
    -D <value>            - dRAID data drives per group
    -S <value>            - dRAID distributed hot spares
    -R <value>            - RAID parity (raidz or dRAID)

The zpool_create, zpool_import, redundancy, replacement and fault
test groups have all been updated provide test coverage for the
dRAID feature.

Co-authored-by: Isaac Huang <he.huang@intel.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Co-authored-by: Don Brady <don.brady@delphix.com>
Co-authored-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mmaybee@cray.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10102
2020-11-13 13:51:51 -08:00
Adrian Chadd 79a357c2a1 Fix pointer-is-uint64_t-sized assumption in the ioctl path
This shows up when compiling freebsd-head on amd64 using gcc-6.4.
The lib32 compat build ends up tripping over this assumption.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: adrian chadd <adrian@freebsd.org>
Closes #11068
Closes #11069
2020-11-10 15:53:13 -08:00
Antonio Russo 71ae6a9d23 Synchronize library ABI levels
Bump library SOVERSION under Linux to match FreeBSD's.

Additionally, this bump properly accounts for the ABI changes relative
to ZoL 0.8.5 for the Linux build.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Issue #11144
2020-11-03 09:24:43 -08:00
Matthew Macy 5fa356ea44
Remove UIO_ZEROCOPY functions structures
The original xuio zero copy functionality has always been unused 
on Linux and FreeBSD.  Remove this disabled code to avoid any
confusion and improve readability.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11124
2020-10-30 10:00:33 -07:00
Ryan Moeller 76d04993a6
Update references to nonexistent man pages in code
Refer to the correct section or alternative for FreeBSD and Linux.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11132
2020-10-30 08:55:59 -07:00
Matthew Macy e53d678d4a
Share zfs_fsync, zfs_read, zfs_write, et al between Linux and FreeBSD
The zfs_fsync, zfs_read, and zfs_write function are almost identical
between Linux and FreeBSD.  With a little refactoring they can be
moved to the common code which is what is done by this commit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11078
2020-10-21 14:08:06 -07:00
Ryan Moeller 485b50bb9e
Cross-platform acltype
The acltype property is currently hidden on FreeBSD and does not
reflect the NFSv4 style ZFS ACLs used on the platform.  This makes it
difficult to observe that a pool imported from FreeBSD on Linux has a
different type of ACL that is being ignored, and vice versa.

Add an nfsv4 acltype and expose the property on FreeBSD.

Make the default acltype nfsv4 on FreeBSD.

Setting acltype to an unhanded style is treated the same as setting
it to off.  The ACLs will not be removed, but they will be ignored.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10520
2020-10-13 21:25:48 -07:00
Warner Losh b302185a92
FreeBSD: make adjustments for the standalone environment
In FreeBSD, there are three compile environments that are supported:
user land, the kernel and the bootloader / standalone. Adjust the
headers to compile in the standalone environment. Limit kernel-only
items from view when _STANDALONE is defined.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Warner Losh <imp@FreeBSD.org>
Closes #10998
2020-10-13 21:05:49 -07:00
Ryan Moeller e191b60ddc
FreeBSD: Improve libzfs_error_init messages
It is a common mistake to have failed to autoload the module due to
permission issues when running a ZFS command as a user.  "Operation
not permitted" is an unhelpfully vague error message.

Use a thread-local message buffer to format a nicer error message.
We can infer that loading the kernel module failed if the module is
not loaded.  This can be extended with heuristics for other errors
in the future.

While looking at this stuff, remove an unused thread-local message
buffer found in libspl and remove some inaccurate verbiage from the
comment on libzfs_load_module.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11033
2020-10-13 09:38:40 -07:00
Brian Behlendorf d0249a4bd0
Replace ZFS on Linux references with OpenZFS
This change updates the documentation to refer to the project
as OpenZFS instead ZFS on Linux.  Web links have been updated
to refer to https://github.com/openzfs/zfs.  The extraneous
zfsonlinux.org web links in the ZED and SPL sources have been
dropped.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11007
2020-10-08 20:10:13 -07:00
Christian Schwarz 36482bf607
libzfs_sendrecv: zfs_send: remove unused pipefd and tid variables
fixup of 196bee4

On gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), the code removed
caused `-Wmaybe-uninitialized` errors.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #11021
2020-10-08 09:43:51 -07:00
Alan Somers a132c2b413
Fix EIO after resuming receive of new dataset over an existing one
When resuming an interrupted ZFS send stream that creates a new dataset
with the same name as an existing dataset, if the existing dataset is
accessed after the failed receive, then after the subsequent successful
receive it will return EIO. This happens because nothing mounts the new
dataset, leaving the old, no longer valid dataset still mounted.

This commit fixes zfs receive to always unmount and remount the
destination, regardless of whether the stream is a new stream or a
resumed stream.

Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
External-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=249579
Closes #10995
Closes #10999
2020-10-02 17:47:09 -07:00
George Wilson bd76bcb36d
zpool command complains about /etc/exports.d
If the /etc/exports.d directory does not exist, then we should only
create it when we're performing an action which already requires root
privileges.

This commit moves the directory creation to the enable/disable code
path which ensures that we have the appropriate privileges.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #10785
Closes #10934
2020-09-25 13:09:40 -07:00
Matthew Macy 7b8363d7f0
FreeBSD: Add support for procfs_list
The procfs_list interface is required by several kstats. Implement
this functionality for FreeBSD to provide access to these kstats.
                           
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10890
2020-09-23 16:43:51 -07:00
Allan Jude 908d43d0a9
libzfs: Don't leak buf if nvlist is too large
Resolves FreeBSD Coverity defect:
CID 1432398:  Resource leaks  (RESOURCE_LEAK)

libzfs: don't leak hdl if there is an error reading env var

Resolves FreeBSD Coverity defect:
CID 1432395:  Resource leaks  (RESOURCE_LEAK)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Closes #10882
2020-09-18 10:23:29 -07:00
George Wilson 8e82ffba7b
pool may become suspended during device expansion
When expanding a device zfs needs to rescan the partition table to
get the correct size. This can only happen when we're in the kernel
and requires the device to be closed. As part of the rescan, udev is
notified and the device links are removed and recreated. This leave a
window where the vdev code may try to reopen the device before udev
has recreated the link. If that happens, then the pool may end up in
a suspended state.

To correct this, we leverage the BLKPG_RESIZE_PARTITION ioctl which
allows the partition information to be modified even while it's in use.
This ioctl also does not remove the device link associated with the zfs
data partition so it eliminates the race condition that can occur in
the kernel.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #10897
2020-09-17 20:03:10 -07:00
Toomas Soome 741b20ce0c
libzfsbootenv: lzbe_nvlist_set needs to store bootenv version VB_NVLIST
A small bug did slip into initial libzfsbootenv; while storing nvlist
in nvlist, we should make sure the bootenv is using VB_NVLIST format.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes #10937
2020-09-17 10:51:09 -07:00
Toomas Soome 1db9e6e4e4
zfs label bootenv should store data as nvlist
nvlist does allow us to support different data types and systems.

To encapsulate user data to/from nvlist, the libzfsbootenv library is
provided.

Reviewed-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes #10774
2020-09-15 15:42:27 -07:00
Matthew Ahrens 9b77c57d5a
libzutil depends on libnvpair
libzutil depends on libnvpair, but this dependency is undeclared in the
build system.  Therefore it isn't possible to make a new command that
depends on libzutil, but does not (directly) depend on libnvpair.

This commit makes this dependency explicit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reivewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10915
2020-09-12 08:19:48 -07:00
Fabio Buso 5266cf4826
Display pbkdf2iters property as plain number
The pbkdf2iters property is an iteration counter
and should be displayed as plain number rather
than in binary unit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabio Buso <buso.fabio@gmail.com>
Closes #10871
2020-09-08 08:49:55 -07:00
alaviss 75bf636cd0
libshare: Add missing headers for nfs.c
On musl libc, zfs failed to compile due to the missing <fcntl.h>
include, which is required for `open()` per POSIX.

This commit add the missing <fcntl.h> include.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hiếu Lê <leorize+oss@disroot.org>
Closes #10880
2020-09-04 12:03:57 -07:00
Ryan Moeller ef55446a9c
Spruce up pkg-config files for libzfs/libzfs_core
Several of the listed library dependencies are not relevant on FreeBSD.
Have ./configure save libraries that are found via pkg-config as
${LIB}_PC and use the configured automake variables instead of hard
coded names so we only get what was actually needed.

While here, update the URL to point at the OpenZFS Github repo.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10869
2020-09-04 11:11:18 -07:00
Alexander Richardson f3064162ba
Fixes for running FreeBSD buildworld on Linux/macOS hosts
Adding an #ifdef __FreeBSD__ to a FreeBSD-specific header may seem odd,
but these headers are used on non-FreeBSD systems during the bootstrap
tools phase.
Originally submitted downstream as https://reviews.freebsd.org/D26193

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10863
2020-09-03 20:06:03 -07:00
Alexander Richardson 417e646722
Fix -Werror,-Wmacro-redefined in limits.h
Those macros are also defined by the compiler-provided float.h which
will be included later on (at least in the FreeBSD buildworld case) and
triggers these -Werror warnings. Including <float.h> first and only
defining the macros when DBL_DIG/FLT_DIG is missing fixes this problem.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10864
2020-09-01 16:22:09 -07:00
Ryan Moeller 7b4e27232d
Add 'zfs rename -u' to rename without remounting
Allow to rename file systems without remounting if it is possible.
It is possible for file systems with 'mountpoint' property set to
'legacy' or 'none' - we don't have to change mount directory for them.
Currently such file systems are unmounted on rename and not even
mounted back.

This introduces layering violation, as we need to update
'f_mntfromname' field in statfs structure related to mountpoint (for
the dataset we are renaming and all its children).

In my opinion it is worth it, as it allow to update FreeBSD in even
cleaner way - in ZFS-only configuration root file system is ZFS file
system with 'mountpoint' property set to 'legacy'. If root dataset is
named system/rootfs, we can snapshot it (system/rootfs@upgrade), clone
it (system/oldrootfs), update FreeBSD and if it doesn't boot we can
boot back from system/oldrootfs and rename it back to system/rootfs
while it is mounted as /. Before it was not possible, because
unmounting / was not possible.

Authored by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Matt Macy <mmacy@freebsd.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10839
2020-09-01 16:14:16 -07:00
Ryan Moeller 46b7d53baf libspl: Provide platform-specific zone implementations
FreeBSD has the concept of jails, a precursor to Solaris's zones, which
can be mapped to the required zones interface with relative ease.  The
previous ZFS implementation in FreeBSD did so, and we should continue
to provide an appropriate implementation in OpenZFS as well.

Move lib/libspl/zone.c into platform code and adopt the correct
implementation for FreeBSD.

While here, prune unused code.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #10851
2020-08-31 19:43:30 -07:00
Alexander Richardson 2b07c5aa3e
Fix definition of BLKGETSIZE64 on FreeBSD
The matching ioctl is DIOCGMEDIASIZE.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10818
2020-08-27 16:09:26 -07:00
Ryan Moeller a2f944a140
zpool: Change base URL for ZFS messages to openzfs-docs
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10820
2020-08-26 21:43:06 -07:00
Allan Jude 7a6c12fd6a
Don't assert on nvlists larger than SPA_MAXBLOCKSIZE
Originally we asserted that all reads are less than SPA_MAXBLOCKSIZE
However, nvlists are not ZFS records, and are not limited to
SPA_MAXBLOCKSIZE.

Add a new environment variable, ZFS_SENDRECV_MAX_NVLIST, to allow the
user to specify the maximum size of the nvlist that can be sent or
received.
Default value: 4 * SPA_MAXBLOCKSIZE (64 MB)

Modify libzfs send routines to return a useful error if the send stream
will generate an nvlist that is beyond the maximum size.

Modify libzfs recv routines to add an explicit error message if the
nvlist is too large, rather than abort()ing.

Move the change the assert() to only trigger on data records

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #9616
2020-08-25 11:04:20 -07:00
Sebastian Gottschall 184df27eef
Avoid symbol collision with in-kernel zstdlib
For Linux, when zfs is compiled as an in kernel static variant
and the in kernel zstd library is compiled statically into the kernel
a symbol collision will occur.  This wrapper header renames all
of the relevant zstd functions to avoid this problem.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Closes #10775
2020-08-24 12:20:41 -07:00
Chris McDonough c3b03d0701
Appease GCC sprintf warnings found on Fedora 32/GCC 10.0.1
Increase the size of DDT_NAMELEN and MNT_LINE_MAX to appease GCC
snprintf truncation warnings.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris McDonough <chrism@plope.com>
Closes #10712
Closes #10766
2020-08-24 10:32:59 -07:00
Ryan Moeller 7b15b8d18c
libzstd: Don't warn about stack frame size in userspace
With the current way CFLAGS are modified in libzstd, CFLAGS passed on
the make command line will cause the CFLAGS in the Makefile for zstd.c
to be discarded, but not AM_CFLAGS.  This causes a smaller frame size
limit to be used, and the build fails.

We don't need to worry about stack frame sizes in userspace.  Drop the
extra flags.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #10773
2020-08-23 11:13:34 -07:00
Ryan Moeller 6fe3498ca3
Import vdev ashift optimization from FreeBSD
Many modern devices use physical allocation units that are much
larger than the minimum logical allocation size accessible by
external commands. Two prevalent examples of this are 512e disk
drives (512b logical sector, 4K physical sector) and flash devices
(512b logical sector, 4K or larger allocation block size, and 128k
or larger erase block size). Operations that modify less than the
physical sector size result in a costly read-modify-write or garbage
collection sequence on these devices.

Simply exporting the true physical sector of the device to ZFS would
yield optimal performance, but has two serious drawbacks:

 1. Existing pools created with devices that have different logical
    and physical block sizes, but were configured to use the logical
    block size (e.g. because the OS version used for pool construction
    reported the logical block size instead of the physical block
    size) will suddenly find that the vdev allocation size has
    increased. This can be easily tolerated for active members of
    the array, but ZFS would prevent replacement of a vdev with
    another identical device because it now appears that the smaller
    allocation size required by the pool is not supported by the new
    device.

 2. The device's physical block size may be too large to be supported
    by ZFS. The optimal allocation size for the vdev may be quite
    large. For example, a RAID controller may export a vdev that
    requires read-modify-write cycles unless accessed using 64k
    aligned/sized requests. ZFS currently has an 8k minimum block
    size limit.

Reporting both the logical and physical allocation sizes for vdevs
solves these problems. A device may be used so long as the logical
block size is compatible with the configuration. By comparing the
logical and physical block sizes, new configurations can be optimized
and administrators can be notified of any existing pools that are
sub-optimal.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Matthew Macy <mmacy@freebsd.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10619
2020-08-21 12:53:17 -07:00
Michael Niewöhner 10b3c7f5e4 Add zstd support to zfs
This PR adds two new compression types, based on ZStandard:

- zstd: A basic ZStandard compression algorithm Available compression.
  Levels for zstd are zstd-1 through zstd-19, where the compression
  increases with every level, but speed decreases.

- zstd-fast: A faster version of the ZStandard compression algorithm
  zstd-fast is basically a "negative" level of zstd. The compression
  decreases with every level, but speed increases.

  Available compression levels for zstd-fast:
   - zstd-fast-1 through zstd-fast-10
   - zstd-fast-20 through zstd-fast-100 (in increments of 10)
   - zstd-fast-500 and zstd-fast-1000

For more information check the man page.

Implementation details:

Rather than treat each level of zstd as a different algorithm (as was
done historically with gzip), the block pointer `enum zio_compress`
value is simply zstd for all levels, including zstd-fast, since they all
use the same decompression function.

The compress= property (a 64bit unsigned integer) uses the lower 7 bits
to store the compression algorithm (matching the number of bits used in
a block pointer, as the 8th bit was borrowed for embedded block
pointers).  The upper bits are used to store the compression level.

It is necessary to be able to determine what compression level was used
when later reading a block back, so the concept used in LZ4, where the
first 32bits of the on-disk value are the size of the compressed data
(since the allocation is rounded up to the nearest ashift), was
extended, and we store the version of ZSTD and the level as well as the
compressed size. This value is returned when decompressing a block, so
that if the block needs to be recompressed (L2ARC, nop-write, etc), that
the same parameters will be used to result in the matching checksum.

All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`,
`zio_prop_t`, etc.) uses the separated _compress and _complevel
variables.  Only the properties ZAP contains the combined/bit-shifted
value. The combined value is split when the compression_changed_cb()
callback is called, and sets both objset members (os_compress and
os_complevel).

The userspace tools all use the combined/bit-shifted value.

Additional notes:

zdb can now also decode the ZSTD compression header (flag -Z) and
inspect the size, version and compression level saved in that header.
For each record, if it is ZSTD compressed, the parameters of the decoded
compression header get printed.

ZSTD is included with all current tests and new tests are added
as-needed.

Per-dataset feature flags now get activated when the property is set.
If a compression algorithm requires a feature flag, zfs activates the
feature when the property is set, rather than waiting for the first
block to be born.  This is currently only used by zstd but can be
extended as needed.

Portions-Sponsored-By: The FreeBSD Foundation
Co-authored-by: Allan Jude <allanjude@freebsd.org>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #6247
Closes #9024
Closes #10277
Closes #10278
2020-08-20 10:30:06 -07:00
Ryan Moeller 4f7fb135bd
libzfs_core: Initialize fail_ioc_cmd to ZFS_IOC_LAST
FreeBSD numbers `ZFS_IOC_*` starting at 0, so pick a different
sentinel value to avoid unintentionally messing with
`ZFS_IOC_POOL_CREATE` ioctls.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #10729
2020-08-18 18:07:43 -07:00
George Melikov 663a070c92
Remove unused `zpool_is_bootable`
Otherwise compiler errors with:

```
libzfs_pool.c:449:1: error: 'zpool_is_bootable'
 defined but not used [-Werror=unused-function]
```

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #10734
2020-08-18 09:30:12 -07:00
Richard Laager eaa25f1a8e
Remove GRUB restrictions
The GRUB restrictions are based around the pool's bootfs property.
Given the current situation where GRUB is not staying current with
OpenZFS pool features, having either a non-ZFS /boot or a separate
pool with limited features are pretty much the only long-term answers
for GRUB support.  Only the second case matters in this context.  For
the restrictions to be useful, the bootfs property would have to be set
on the boot pool, because that is where we need the restrictions, as
that is the pool that GRUB reads from. The documentation for bootfs
describes it as pointing to the root pool. That's also how it's used in
the initramfs. ZFS does not allow setting bootfs to point to a dataset
in another pool. (If it did, it'd be difficult-to-impossible to enforce
these restrictions cross-pool). Accordingly, bootfs is pretty much
useless for GRUB scenarios moving forward.

Even for users who have only one pool, the existing restrictions for
GRUB are incomplete. They don't prevent you from enabling the
unsupported checksums, for example. For that reason, I have ripped out
all the GRUB restrictions.

A little longer-term, I think extending the proposed features=portable
system to define a features=grub is a much more useful approach. The
user could set that on the boot pool at creation, and things would
Just Work.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #8627
2020-08-17 23:12:39 -07:00
Matthew Macy 6f763d4085
FreeBSD: Fix module autoloading when built in base
The KMOD name is "zfs" instead of "openzfs" when building in FreeBSD.

Define a ZFS_KMOD symbol as "zfs" when IN_BASE is defined, otherwise
"openzfs".

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10699
2020-08-11 13:49:50 -07:00
Matthew Ahrens c6f2b942be Remove KMC_NOMAGAZINE
Remove dead code to make the implementation easier to understand.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Ahrens <matt@delphix.com>
Closes #10650
2020-08-05 10:28:07 -07:00
Matthew Ahrens d519c10575 Remove KMC_NOHASH
Remove dead code to make the implementation easier to understand.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Ahrens <matt@delphix.com>
Closes #10650
2020-08-05 10:27:56 -07:00
Ryan Moeller b6737193ee
FreeBSD: Fix `zfs jail` and add a test
zfs_jail was not using zfs_ioctl so failed to map the IOC number
correctly.  Use zfs_ioctl to perform the jail ioctl and add a test 
case for FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10658
2020-08-01 08:44:54 -07:00
Allan Jude 8fb79fdddb
Change the error handling for invalid property values
ZFS recv should return a useful error message when an invalid index
property value is provided in the send stream properties nvlist

With a compression= property outside of the understood range:

Before:
```
receiving full stream of zof/zstd_send@send2 into testpool/recv@send2
internal error: Invalid argument
Aborted (core dumped)
```
Note: the recv completes successfully, the abort() is likely just to
make it easier to track the unexpected error code.

After:
```
receiving full stream of zof/zstd_send@send2 into testpool/recv@send2
cannot receive compression property on testpool/recv: invalid property
value received 28.9M stream in 1 seconds (28.9M/sec)
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #10631
2020-08-01 08:41:31 -07:00
Matthew Macy 47ed79ff60
Changes to make openzfs build within FreeBSD buildworld
A collection of header changes to enable FreeBSD to build
with vendored OpenZFS.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10635
2020-07-31 21:30:31 -07:00
Allan Jude 24f98ed383
When encountering EZFS_UNKNOWN, print the error text buffer anyway
Rather than just saying there was an internal error, provide any
context we might have to the user to help them understand the issue.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #10632
2020-07-31 09:07:37 -07:00
Matthew Macy 27d96d2254
Rename refcount.h to zfs_refcount.h
Renamed to avoid conflicting with refcount.h when a different
implementation is already provided by the platform.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10620
2020-07-29 16:35:33 -07:00
Matthew Macy 5678d3f593
Prefix zfs internal endian checks with _ZFS
FreeBSD defines _BIG_ENDIAN BIG_ENDIAN _LITTLE_ENDIAN
LITTLE_ENDIAN on every architecture. Trying to do
cross builds whilst hiding this from ZFS has proven
extremely cumbersome.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10621
2020-07-28 13:02:49 -07:00
Matthew Macy f5b189f937
FreeBSD: Fixes required to build ZFS on PowerPC
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10622
2020-07-25 11:00:23 -07:00
Kyle Evans bfafe1780a
Annotate unused parameters on inline definitions as such
* libspl: umem: These are obviously and intentionally unused; annotate 
  them as such to appease -Wunused-parameter builds that include this 
  header.

* sys/dmu.h: In this case, clear_on_evict_dbufp is only used for 
  ZFS_DEBUG builds, so annotate it as __maybe_unused to appease 
  -Wunused-parameter.


Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes #10606
2020-07-23 17:41:48 -07:00
Kyle Evans b197457cd6
libzfs: const'ify path argument to zfs_path_to_zhandle
zfs_path_to_zhandle has no need to mutate the path argument,
most notably:

- zfs_open takes path as const
- getextmntent takes path as const
- fprintf most clearly doesn't need to mutate it

It's hard to foresee any reason that libzfs could conceivably
want to mutate it in the future, either, so const'ify it.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes #10605
2020-07-22 11:14:20 -07:00
Matthew Macy 23c871671c
FreeBSD: zfs commands backward compatibility
Update the zfs commands such that they're backwards compatible with
the version of ZFS is the base FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10542
2020-07-15 21:32:50 -07:00
Joao Carlos Mendes Luis 5f72109e5b
Disable -Wl,-z,defs for ASAN builds
Commit af65916 added -Wl,-z,defs for the shared libraries. This
apparently does not work in some cases with --enable-asan, so only add
it for non-ASAN builds.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: João Carlos Mendes Luis <jonny@jonny.eng.br>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10557
Closes #10560
2020-07-14 12:17:44 -07:00
Brian Atkinson e4d3d77684
Fixing gang ABD child removal race condition
On linux the list debug code has been setting off a failure when
checking that the node->next->prev value is pointing back at the node.
At times this check evaluates to 0xdead. When removing a child from a
gang ABD we must acquire the child's abd_mtx to make sure that the
same ABD is not being added to another gang ABD while it is being
removed from a gang ABD. This fixes a race condition when checking
if an ABDs link is already active and part of another gang ABD before
adding it to a gang.

Added additional debug code for the gang ABD in abd_verify() to make
sure each child ABD has active links. Also check to make sure another
gang ABD is not added to a gang ABD.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10511
2020-07-14 11:04:35 -07:00
George Wilson c15d36c674
Remove dependency on sharetab file and refactor sharing logic
== Motivation and Context

The current implementation of 'sharenfs' and 'sharesmb' relies on
the use of the sharetab file. The use of this file is os-specific
and not required by linux or freebsd. Currently the code must
maintain updates to this file which adds complexity and presents
a significant performance impact when sharing many datasets. In
addition, concurrently running 'zfs sharenfs' command results in
missing entries in the sharetab file leading to unexpected failures.

== Description

This change removes the sharetab logic from the linux and freebsd
implementation of 'sharenfs' and 'sharesmb'. It still preserves an
os-specific library which contains the logic required for sharing
NFS or SMB. The following entry points exist in the vastly simplified
libshare library:

- sa_enable_share -- shares a dataset but may not commit the change
- sa_disable_share -- unshares a dataset but may not commit the change
- sa_is_shared -- determine if a dataset is shared
- sa_commit_share -- notify NFS/SMB subsystem to commit the shares
- sa_validate_shareopts -- determine if sharing options are valid

The sa_commit_share entry point is provided as a performance enhancement
and is not required. The sa_enable_share/sa_disable_share may commit
the share as part of the implementation. Libshare provides a framework
for both NFS and SMB but some operating systems may not fully support
these protocols or all features of the protocol.

NFS Operation:
For linux, libshare updates /etc/exports.d/zfs.exports to add
and remove shares and then commits the changes by invoking
'exportfs -r'. This file, is automatically read by the kernel NFS
implementation which makes for better integration with the NFS systemd
service. For FreeBSD, libshare updates /etc/zfs/exports to add and
remove shares and then commits the changes by sending a SIGHUP to
mountd.

SMB Operation:
For linux, libshare adds and removes files in /var/lib/samba/usershares
by calling the 'net' command directly. There is no need to commit the
changes. FreeBSD does not support SMB.

== Performance Results

To test sharing performance we created a pool with an increasing number
of datasets and invoked various zfs actions that would enable and
disable sharing. The performance testing was limited to NFS sharing.
The following tests were performed on an 8 vCPU system with 128GB and
a pool comprised of 4 50GB SSDs:

Scale testing:
- Share all filesystems in parallel -- zfs sharenfs=on <dataset> &
- Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> &

Functional testing:
- share each filesystem serially -- zfs share -a
- unshare each filesystem serially -- zfs unshare -a
- reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool>

For 'zfs sharenfs=on' scale testing we saw an average reduction in time
of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time
of 83.36%.

Functional testing also shows a huge improvement:
- zfs share -- 97.97% reduction in time
- zfs unshare -- 96.47% reduction in time
- zfs inhert -r sharenfs -- 99.01% reduction in time

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Bryant G. Ly <bryangly@gmail.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
External-Issue: DLPX-68690
Closes #1603
Closes #7692
Closes #7943
Closes #10300
2020-07-13 09:19:18 -07:00
Matthew Ahrens e59a377a8f
filesystem_limit/snapshot_limit is incorrectly enforced against root
The filesystem_limit and snapshot_limit properties limit the number of
filesystems or snapshots that can be created below this dataset.
According to the manpage, "The limit is not enforced if the user is
allowed to change the limit."  Two types of users are allowed to change
the limit:

1. Those that have been delegated the `filesystem_limit` or
`snapshot_limit` permission, e.g. with
`zfs allow USER filesystem_limit DATASET`.  This works properly.

2. A user with elevated system privileges (e.g. root).  This does not
work - the root user will incorrectly get an error when trying to create
a snapshot/filesystem, if it exceeds the `_limit` property.

The problem is that `priv_policy_ns()` does not work if the `cred_t` is
not that of the current process.  This happens when
`dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a
sync task's check func) to determine the permissions of the
corresponding user process.

This commit fixes the issue by passing the `task_struct` (typedef'ed as
a `proc_t`) to syncing context, and then using `has_capability()` to
determine if that process is privileged.  Note that we still need to
pass the `cred_t` to syncing context so that we can check if the user
was delegated this permission with `zfs allow`.

This problem only impacts Linux.  Wrappers are added to FreeBSD but it
continues to use `priv_check_cred()`, which works on arbitrary `cred_t`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #8226
Closes #10545
2020-07-11 17:18:02 -07:00
Ryan Moeller 217f48373f
libzfs: Add error message for why creating mountpoint failed
When zfs_mount_at() fails to stat the mountpoint and can't create the
directory, we return an error with a message "failed to create
mountpoint" but there is no indication why it failed.

Add the error string from the syscall to the error aux message.

Update do_mount for Linux to return the errno instead of -1.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10550
2020-07-11 17:16:13 -07:00
Serapheim Dimitropoulos 6f1db5f37e
Unconditionally enable debugging for libzpool
We already enable -DDEBUG unconditionally (meaning regardless
of this is a debug build or a performance build) for zdb and
ztest as they are mostly used for development and debugging.

This patch enables -DDEBUG for libzpool extending the debugging
checks for zdb, ztest, and a couple of other test utilities.

In addition to passing -DDEBUG we also enable -DZFS_DEBUG so
all assertion checks work s expected. We do so not only in
libzpool but in every utility that links to it, even if the
utility doesn't directly use any functionality wrapped in
ZFS_DEBUG macro definitions. The reason is that these utilities
may still include headers that contain structs that have more
fields when ZFS_DEBUG is defined. This can be a problem as
enabling that flag for libzpool but not for zdb can lead into
random problems (e.g. segmentation faults) as zdb may be have
an incorrect view of a struct passed to it by libzpool.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #10549
2020-07-10 15:30:31 -07:00
Arvind Sankar 3e597dee11 Use abs_top_builddir when referencing libraries
libtool stores absolute paths in the dependency_libs component of the
.la files. If the Makefile for a dependent library refers to the
libraries by relative path, some libraries end up duplicated on the link
command line.

As an example, libzfs specifies libzfs_core, libnvpair and libuutil as
dependencies to be linked in. The .la file for libzfs_core also
specifies libnvpair, but using an absolute path, with the result that
libnvpair is present twice in the linker command line for producing
libzfs.

While the only thing this causes is to slightly slow down the linking,
we can avoid it by using absolute paths everywhere, including for
convenience libraries just for consistency.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:32 -07:00
Arvind Sankar af65916226 Add -z defs to LDFLAGS
This will make sure the installed libraries are linked with everything
they require.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:22 -07:00
Arvind Sankar 1537105a8c Add config.rpath for AM_GNU_GETTEXT
Commit e8864b1b28 ("config: libintl/libiconv for gettext() detection")
added an empty config.rpath with a comment that the real one doesn't
work with libtool.

However, an empty config.rpath doesn't really work: eg. on FreeBSD,
where libintl is in /usr/local/lib, configure thinks that gettext
doesn't exist and NLS should be disabled, which currently isn't
supported in the source, and hence requires manual workaround to
directly link -lintl without relying on configure. config.rpath is
essential to let it be detected either in --prefix or using
--with-libintl-prefix.

I also don't see the mentioned issue with libtool flags applied to
compilation, it seems to work fine to pass LTLIBINTL to libtool. It's
unnecessary to include LTLIBICONV as the configure test will
automatically append that to LTLIBINTL if it is necessary to link with
libiconv.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:12 -07:00
Arvind Sankar 4d61ade1a3 Clean up lib dependencies
libzutil is currently statically linked into libzfs, libzfs_core and
libzpool. Avoid the unnecessary duplication by removing it from libzfs
and libzpool, and adding libzfs_core to libzpool.

Remove a few unnecessary dependencies:
- libuutil from libzfs_core
- libtirpc from libspl
- keep only libcrypto in libzfs, as we don't use any functions from
  libssl
- librt is only used for clock_gettime, however on modern systems that's
  in libc rather than librt. Add a configure check to see if we actually
  need librt
- libdl from raidz_test

Add a few missing dependencies:
- zlib to libefi and libzfs
- libuuid to zpool, and libuuid and libudev to zed
- libnvpair uses assertions, so add assert.c to provide aok and
  libspl_assertf

Sort the LDADD for programs so that libraries that satisfy dependencies
come at the end rather than the beginning of the linker command line.

Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY
instead. This can take advantage of pkg-config, and it also avoids
polluting LIBS.

List all the required dependencies in the pkgconfig files, and move the
one for libzfs_core into the latter's directory. Install pkgconfig files
in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on
FreeBSD, instead of /usr/share/pkgconfig, as the more correct location
for library .pc files.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:00 -07:00
Arvind Sankar b6437ea41c Move libspl_assertf into .c file
Variadic functions cannot be inlined. libspl_assertf ends up being
duplicated in every file that uses it.

Fix this by moving the function into a new assert.c. Also move the
definition of aok into the new file instead of zone.c.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:25:24 -07:00
Ryan Moeller 659f4008be
libzfs: Make zfs_cmd_t initialization consistent, use zfs_ioctl
The clang version 8.0.1 shipped in FreeBSD 12.1-RELEASE also oddly
throws a warning that is treated as an error on the initialization of
the zc struct in zpool_nextboot.

The zpool_nextboot code from FreeBSD was not updated to use zfs_ioctl.

Switch ioctl to zfs_ioctl in and use {"\0"} to initialize the struct.
Do a consistency pass for zfs_cmd_t initialization.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10539
2020-07-09 17:47:12 -07:00
Ryan Moeller fb91f0367e
Add zpool_nextboot, move zfs_jail to libzfs.h
FreeBSD has a zfsbootcfg command that wants zpool_nextboot in libzfs.

Add the function to FreeBSD's libzfs_compat.c, and while here move
the prototype for zfs_jail out of param.h in FreeBSD's SPL and into
libzfs.h under an ifdef for FreeBSD, where the prototype for
zpool_nextboot joins it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10524
2020-07-06 11:57:24 -07:00
winglq a4b0a74c7f
Fix atomic_clear_long_excl wrong return
When clearing a bit, we should check whether that bit is 0.
Note atomic_clear_long_excl is not used.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Liu Qing <winglq@gmail.com>
Closes #10526
2020-07-06 11:46:17 -07:00
Brian Behlendorf 9a49d3f3d3
Add device rebuild feature
The device_rebuild feature enables sequential reconstruction when
resilvering.  Mirror vdevs can be rebuilt in LBA order which may
more quickly restore redundancy depending on the pools average block
size, overall fragmentation and the performance characteristics
of the devices.  However, block checksums cannot be verified
as part of the rebuild thus a scrub is automatically started after
the sequential resilver completes.

The new '-s' option has been added to the `zpool attach` and
`zpool replace` command to request sequential reconstruction
instead of healing reconstruction when resilvering.

    zpool attach -s <pool> <existing vdev> <new vdev>
    zpool replace -s <pool> <old vdev> <new vdev>

The `zpool status` output has been updated to report the progress
of sequential resilvering in the same way as healing resilvering.
The one notable difference is that multiple sequential resilvers
may be in progress as long as they're operating on different
top-level vdevs.

The `zpool wait -t resilver` command was extended to wait on
sequential resilvers.  From this perspective they are no different
than healing resilvers.

Sequential resilvers cannot be supported for RAIDZ, but are
compatible with the dRAID feature being developed.

As part of this change the resilver_restart_* tests were moved
in to the functional/replacement directory.  Additionally, the
replacement tests were renamed and extended to verify both
resilvering and rebuilding.

Original-patch-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: John Poduska <jpoduska@datto.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10349
2020-07-03 11:05:50 -07:00
Matthew Ahrens 3c42c9ed84
Clean up OS-specific ARC and kmem code
OS-specific code (e.g. under `module/os/linux`) does not need to share
its code structure with any other operating systems.  In particular, the
ARC and kmem code need not be similar to the code in illumos, because we
won't be syncing this OS-specific code between operating systems.  For
example, if/when illumos support is added to the common repo, we would
add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of
this code.

Therefore, we can simplify the code in the OS-specific ARC and kmem
routines.

These changes do not impact system behavior, they are purely code
cleanup.  The changes are:

Arenas are not used on Linux or FreeBSD (they are always `NULL`), so
`heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along
with code that uses them.

In `arc_available_memory()`:
 * `desfree` is unused, remove it
 * rename `freemem` to avoid conflict with pre-existing `#define`
 * remove checks related to arenas
 * use units of bytes, rather than converting from bytes to pages and
   then back to bytes

`SPL_KMEM_CACHE_REAP` is unused, remove it.

`skc_reap` is unused, remove it.

The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove
it.

`vmem_size()` and associated type and macros are unused, remove them.

In `arc_memory_throttle()`, use a less confusing variable name to store
the result of `arc_free_memory()`.

Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10499
2020-06-29 09:01:07 -07:00
Arvind Sankar 6b99fc0620 Fixes for make dist
Reduce the usage of EXTRA_DIST. If files are conditionally included in
_SOURCES, _HEADERS etc, automake is smart enough to dist all files that
could possibly be included, but this does not apply to EXTRA_DIST,
resulting in make dist depending on the configuration.

Add some files that were missing altogether in various Makefile's.

The changes to disted files in this commit (excluding deleted files):

+./cmd/zed/agents/README.md
+./etc/init.d/README.md
+./lib/libspl/os/freebsd/getexecname.c
+./lib/libspl/os/freebsd/gethostid.c
+./lib/libspl/os/freebsd/getmntany.c
+./lib/libspl/os/freebsd/mnttab.c
-./lib/libzfs/libzfs_core.pc
-./lib/libzfs/libzfs.pc
+./lib/libzfs/os/freebsd/libzfs_compat.c
+./lib/libzfs/os/freebsd/libzfs_fsshare.c
+./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c
+./lib/libzfs/os/freebsd/libzfs_zmount.c
+./lib/libzutil/os/freebsd/zutil_compat.c
+./lib/libzutil/os/freebsd/zutil_device_path_os.c
+./lib/libzutil/os/freebsd/zutil_import_os.c
+./module/lua/README.zfs
+./module/os/linux/spl/README.md
+./tests/README.md
+./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh
+./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh
+./tests/zfs-tests/tests/functional/inheritance/README.config
+./tests/zfs-tests/tests/functional/inheritance/README.state
+./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh
+./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10501
2020-06-26 14:20:02 -07:00
Arvind Sankar 7513807320 Drop unnecessary srcdir paths
There's no need to specify the srcdir explicitly in _HEADERS and
EXTRA_DIST.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:20:18 -07:00
Arvind Sankar 2989d1012a Fix libspl/asm-generic/atomic for VPATH build
Currently, asm-generic/atomic.c is compiled into a .S file, with a
comment saying this is to simplify the upper-level Makefile.

However, this doesn't work properly with a VPATH build, which would
require better logic to deal with generated sources correctly.

It also doesn't seem more complex to just specify the .c/.S source file,
depending on the cpu, instead of only the source directory in
lib/libspl/Makefile.am, which eliminates the need to do the intermediate
compilation.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:19:36 -07:00
Prawn 2451a55368
zfs -V: Print userland version even if kernel module not loaded
Running zfs -V when the modules are not loaded would currently 
result in the following output:

    zfs_version_kernel() failed: No such file or directory

Note the lack of userland version output.  Reorder the code to
ensure the userland version is printed even when the kmods
are not loaded.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes #10483
2020-06-22 09:56:29 -07:00
Arvind Sankar 0ce2de637b Add prototypes
Add prototypes/move prototypes to header files.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:32 -07:00
Arvind Sankar 60356b1a21 Add include files for prototypes
Include the header with prototypes in the file that provides definitions
as well, to catch any mismatch between prototype and definition.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:25 -07:00
Arvind Sankar c3fe42aabd Remove dead code
Delete unused functions.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:18 -07:00
Arvind Sankar 65c7cc49bf Mark functions as static
Mark functions used only in the same translation unit as static. This
only includes functions that do not have a prototype in a header file
either.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:20:38 -07:00
Arvind Sankar 1fa5c7af33 Cleanup libzpool/kernel.c
Commit
  ec21397127 ("async zvol minor node creation interferes with receive")
replaced zvol_create_minors with zvol_create_minor and
zvol_create_minors_recursive, changing the prototype at the same time.

However the stub functions in libzpool/kernel.c were defined with the
old prototype. As the definitions are empty, this doesn't cause any
runtime issues, but an LTO build shows warnings because of the
mismatched prototypes.

Commit
  a0bd735adb ("Add support for asynchronous zvol minor operations")
removed the real zvol_remove_minor, but for some reason added a stub
implementation in libzpool/kernel.c with no references. Delete this dead
code.

Commit
  196bee4cfd ("Remove deduplicated send/receive code")
removed zfs_onexit_del_cb and zfs_onexit_cb_data. Drop the stubs as
well.

Add zvol.h include to provide prototypes, and sort the include
directives.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:18:49 -07:00
Matthew Macy 8056a75672
Disambiguate condvar API contract
On Illumos callers of cv_timedwait and cv_timedwait_hires
can't distinguish between whether or not the cv was signaled
or the call timed out. Illumos handles this (for some definition
of handles) by calling cv_signal in the return path if we were
signaled but the return value indicates instead that we timed
out. This would make sense if it were possible to query the the
cv for its net signal disposition. However, this isn't possible
and, in spite of the fact that there are places in the code that
clearly take a different and incompatible path if a timeout value
is indicated, this distinction appears to be rather subtle to most
developers. This problem is further compounded by the fact that on
Linux, calling cv_signal in the return path wouldn't even do the
right thing unless there are other waiters.

Since it is possible for the caller to independently determine how
much time is remaining but it is not possible to query if the cv
was in fact signaled, prioritizing signalling over timeout seems
like a cleaner solution. In addition, judging from usage patterns
within the code itself, it is also less error prone.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10471
2020-06-18 10:17:50 -07:00
Matthew Ahrens ba54b180a5
Remove refences to blacklist/whitelist
These terms reinforce the incorrect notion that black is bad and white
is good.

Replace this language with more specific terms which are also more clear
and don't rely on metaphor.  Specifically:

* When vdevs are specified on the command line, they are the "selected"
vdevs.

* Entries in /dev/ which should not be considered as possible disks are
"excluded" devices.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10457
2020-06-16 11:41:45 -07:00
Jorgen Lundman 883a40fff4
Add convenience wrappers for common uio usage
The macOS uio struct is opaque and the API must be used, this
makes the smallest changes to the code for all platforms.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10412
2020-06-14 10:09:55 -07:00
Matthew Ahrens f66434268c
Remove unnecessary references to slavery
The horrible effects of human slavery continue to impact society.  The
casual use of the term "slave" in computer software is an unnecessary
reference to a painful human experience.

This commit removes all possible references to the term "slave".

Implementation notes:

The zpool.d/slaves script is renamed to dm-deps, which uses the same
terminology as `dmsetup deps`.

References to the `/sys/class/block/$dev/slaves` directory remain.  This
directory name is determined by the Linux kernel.  Although
`dmsetup deps` provides the same information, it unfortunately requires
elevated privileges, whereas the `/sys/...` directory is world-readable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10435
2020-06-10 17:07:59 -07:00
Arvind Sankar 66786f7943 Fix VPATH builds for user config
cmd/zpool and lib/libzutil Makefile's use -I., which won't work with a
VPATH build. Replace it with -I$(srcdir) instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10379
Closes #10421
2020-06-10 09:25:37 -07:00
Andrea Gelmini dd4bc569b9
Fix typos
Correct various typos in the comments and tests.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #10423
2020-06-09 21:24:09 -07:00
Matthew Ahrens 7bcb7f0840
File incorrectly zeroed when receiving incremental stream that toggles -L
Background:

By increasing the recordsize property above the default of 128KB, a
filesystem may have "large" blocks.  By default, a send stream of such a
filesystem does not contain large WRITE records, instead it decreases
objects' block sizes to 128KB and splits the large blocks into 128KB
blocks, allowing the large-block filesystem to be received by a system
that does not support the `large_blocks` feature.  A send stream
generated by `zfs send -L` (or `--large-block`) preserves the large
block size on the receiving system, by using large WRITE records.

When receiving an incremental send stream for a filesystem with large
blocks, if the send stream's -L flag was toggled, a bug is encountered
in which the file's contents are incorrectly zeroed out.  The contents
of any blocks that were not modified by this send stream will be lost.
"Toggled" means that the previous send used `-L`, but this incremental
does not use `-L` (-L to no-L); or that the previous send did not use
`-L`, but this incremental does use `-L` (no-L to -L).

Changes:

This commit addresses the problem with several changes to the semantics
of zfs send/receive:

1. "-L to no-L" incrementals are rejected.  If the previous send used
`-L`, but this incremental does not use `-L`, the `zfs receive` will
fail with this error message:

    incremental send stream requires -L (--large-block), to match
    previous receive.

2. "no-L to -L" incrementals are handled correctly, preserving the
smaller (128KB) block size of any already-received files that used large
blocks on the sending system but were split by `zfs send` without the
`-L` flag.

3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`.
This feature indicates that we can correctly handle "no-L to -L"
incrementals.  This flag is currently not set on any send streams.  In
the future, we intend for incremental send streams of snapshots that
have large blocks to use `-L` by default, and these streams will also
have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams
from the default use of `zfs send` won't encounter the bug mentioned
above, because they can't be received by software with the bug.

Implementation notes:

To facilitate accessing the ZPL's generation number,
`zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and
restructured to fill in a struct with ZPL-specific info including owner
and generation.

In the "no-L to -L" case, if this is a compressed send stream (from
`zfs send -cL`), large WRITE records that are being written to small
(128KB) blocksize files need to be decompressed so that they can be
written split up into multiple blocks.  The zio pipeline will recompress
each smaller block individually.

A new test case, `send-L_toggle`, is added, which tests the "no-L to -L"
case and verifies that we get an error for the "-L to no-L" case.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #6224 
Closes #10383
2020-06-09 10:41:01 -07:00
Paul Dagnelie b2f3709c3e
Don't erase final byte of envblock
When we copy the envblock's contents out, we currently treat it as 
a normal C string. However, this functionality is supposed to more
closely emulate interacting with a file. As a consequence, we were 
incorrectly truncating the contents of the envblock by replacing 
the final byte of the buffer with a null character.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10405
2020-06-08 08:58:13 -07:00
Ryan Moeller 60265072e0
Improve compatibility with C++ consumers
C++ is a little picky about not using keywords for names, or string
constness.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10409
2020-06-06 12:54:04 -07:00
наб a1ba120927 Always use "%lld" for formatting time_ts
Given the following test program:
  #include <time.h>
  #include <stdio.h>
  #include <stdint.h>
  int main() {
    printf("time_t:    %d\n", sizeof(time_t));
    printf("long:      %d\n", sizeof(long));
    printf("long long: %d\n", sizeof(long long));
  }

These are output on various x86 architectures:
  x32$   time_t:    8
  x32$   long:      4
  x32$   long long: 8

  amd64$ time_t:    8
  amd64$ long:      8
  amd64$ long long: 8

  i386$  time_t:    4
  i386$  long:      4
  i386$  long long: 8

Therefore code using "%l[du]" to format time_ts produced warnings on x32

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@gmail.com>
Closes #10357
Closes #844
2020-05-28 10:29:58 -07:00
наб 6059f3a1f6 Correctly handle the x32 ABI
__x86_64__ && _ILP32 => don't forcibly define _LP64

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@gmail.com>
Closes #10357
Closes #844
2020-05-28 10:28:20 -07:00
John Gallagher 50ff632787
Rework error handling in zpool_trim()
When a manual trim is run against an entire pool, errors about
particular devices which don't support trim are suppressed. This changes
zpool_trim() in libzfs so that it doesn't return an error when the only
errors are suppressed ones. An exception is made when none of the
devices support trim, in which case an error is reported and a non-zero
status is returned.

This also fixes how the --wait flag works in the presence of suppressed
errors. In particular, suppressed errors no longer cause zpool_trim()
to skip the wait.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #10263 
Closes #10372
2020-05-27 17:27:28 -07:00
felixdoerre 501a1511ae
mount: use the mount syscall directly
Allow zfs datasets to be mounted on Linux without relying on the
invocation of an external processes.  This is the same behavior
which is implemented for FreeBSD.

Use of the libmount library was originally considered because it 
provides functionality to properly lock and update the /etc/mtab 
file.  However, these days /etc/mtab is typically a symlink to 
/proc/self/mounts so there's nothing to updated.  Therefore, we
call mount(2) directly and avoid any additional dependencies. 

If required the legacy behavior can be enabled by setting the 
ZFS_MOUNT_HELPER environment variable.  This may be needed in
environments where SELinux in enabled and the zfs binary does  
not have mount permission.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Felix Dörre <felix@dogcraft.de>
#10294
2020-05-20 18:02:41 -07:00
Paul Dagnelie de4f06c275
Small program that converts a dataset id and an object id to a path
Small program that converts a dataset id and an object id to a path

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10204
2020-05-20 10:05:33 -07:00
Brian Atkinson fc551d7efb
Combine OS-independent ABD Code into Common Source File
Reorganizing ABD code base so OS-independent ABD code has been placed
into a common abd.c file. OS-dependent ABD code has been left in each
OS's ABD source files, and these source files have been renamed to
abd_os.

The OS-independent ABD code is now under:
module/zfs/abd.c
With the OS-dependent code in:
module/os/linux/zfs/abd_os.c
module/os/freebsd/zfs/abd_os.c

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10293
2020-05-10 12:23:52 -07:00
Paul Dagnelie 108a454a46
Add support for boot environment data to be stored in the label
Modern bootloaders leverage data stored in the root filesystem to 
enable some of their powerful features. GRUB specifically has a grubenv 
file which can store large amounts of configuration data that can be 
read and written at boot time and during normal operation. This allows 
sysadmins to configure useful features like automated failover after 
failed boot attempts. Unfortunately, due to the Copy-on-Write nature 
of ZFS, the standard behavior of these tools cannot handle writing to
ZFS files safely at boot time. We need an alternative way to store 
data that allows the bootloader to make changes to the data.

This work is very similar to work that was done on Illumos to enable 
similar functionality in the FreeBSD bootloader. This patch is different 
in that the data being stored is a raw grubenv file; this file can store 
arbitrary variables and values, and the scripting provided by grub is 
powerful enough that special structures are not required to implement 
advanced behavior.

We repurpose the second padding area in each label to store the grubenv 
file, protected by an embedded checksum. We add two ioctls to get and 
set this data, and libzfs_core and libzfs functions to access them more 
easily. There are no direct command line interfaces to these functions; 
these will be added directly to the bootloader utilities.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10009
2020-05-07 09:36:33 -07:00
George Amanakis 1b664952ae
Enable splitting mirrors with indirect vdevs
When a top-level vdev is removed from a pool it is converted to an
indirect vdev. Until now splitting such mirrored pools was not possible
with zpool split. This patch enables handling of indirect vdevs and
splitting of those pools with zpool split.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #10283
2020-05-06 10:32:28 -07:00
Adam D. Moss d7d4678fe6
Fix regression caused by c14ca14
The 'zfs load-key' command was broken for 'keyformat=passphrase'.
Use the correct output vars when stdin is an interactive terminal.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: adam moss <c@yotes.com>
Closes #10264 
Closes #10265
2020-04-29 17:33:33 -07:00
Jason King c14ca1456e
Support custom URI schemes for the keylocation property
Every platform has their own preferred methods for implementing URI 
schemes beyond the currently supported file scheme (e.g. 'https' on 
FreeBSD would likely use libfetch, while Linux distros and illumos
would probably use libcurl, etc). It would be helpful if libzfs can 
be extended to support additional schemes in a simple manner.

A table of (scheme, handler_function) pairs is added to libzfs_crypto.c, 
and the existing functions in libzfs_crypto.c so that when the key 
format is ZFS_KEYFORMAT_URI, the scheme from the URI string is 
extracted, and a matching handler it located in the aforementioned 
table (returning an error if no matching handler is found). The handler 
function is then invoked to retrieve the key material (in the format 
specified by the keyformat property) and the key is loaded or the 
handler can return an error to abort the key loading process.

Reviewed by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason King <jason.king@joyent.com>
Closes #10218
2020-04-28 10:55:18 -07:00
Matthew Ahrens 5d4ed9614f
change libspl list member names to match kernel
This aids in debugging, so that we can use the same infrastructure to
walk zfs's list_t in the kernel module and in the userland libraries
(e.g. when debugging ztest).

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10236
2020-04-23 15:53:14 -07:00
Matthew Ahrens 196bee4cfd
Remove deduplicated send/receive code
Deduplicated send streams (i.e. `zfs send -D` and `zfs receive` of such
streams) are deprecated.  Deduplicated send streams can be received by
first converting them to non-deduplicated with the `zstream redup`
command.

This commit removes the code for sending and receiving deduplicated send
streams.  `zfs send -D` will now print a warning, ignore the `-D` flag,
and generate a regular (non-deduplicated) send stream.  `zfs receive` of
a deduplicated send stream will print an error message and fail.

The resulting code simplification (especially in the kernel's support
for receiving dedup streams) should help enable future performance
enhancements.

Several new tests are added which leverage `zstream redup`.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Issue #7887
Issue #10117
Issue #10156
Closes #10212
2020-04-23 10:06:57 -07:00
Joao Carlos Mendes Luis 70e5ad31f6
Fix more leaks detected by ASAN
This commit fixes a bunch of missing free() calls in a10d50f99

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: João Carlos Mendes Luís <jonny@jonny.eng.br>
Closes #10219
2020-04-22 10:40:34 -07:00
alaviss 6b1139e82c
sys/mnttab.h: include sys/stat.h for stat64
Musl libc defined `stat64` as a macro, which causes the build to fail
upon compiling os/linux/getmntany.c due to conflicts between the forward
declaration and the implementation.

This commit fixes that by including <sys/stat.h> in "sys/mnttab.h"
directly.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hiếu Lê <leorize+oss@disroot.org>
Closes #10195
2020-04-14 11:47:40 -07:00
Matthew Macy 9f0a21e641
Add FreeBSD support to OpenZFS
Add the FreeBSD platform code to the OpenZFS repository.  As of this
commit the source can be compiled and tested on FreeBSD 11 and 12.
Subsequent commits are now required to compile on FreeBSD and Linux.
Additionally, they must pass the ZFS Test Suite on FreeBSD which is
being run by the CI.  As of this commit 1230 tests pass on FreeBSD
and there are no unexpected failures.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #898 
Closes #8987
2020-04-14 11:36:28 -07:00
Matthew Ahrens c618f87cd2
Add `zstream redup` command to convert deduplicated send streams
Deduplicated send and receive is deprecated.  To ease migration to the
new dedup-send-less world, the commit adds a `zstream redup` utility to
convert deduplicated send streams to normal streams, so that they can
continue to be received indefinitely.

The new `zstream` command also replaces the functionality of
`zstreamdump`, by way of the `zstream dump` subcommand.  The
`zstreamdump` command is replaced by a shell script which invokes
`zstream dump`.

The way that `zstream redup` works under the hood is that as we read the
send stream, we build up a hash table which maps from `<GUID, object,
offset> -> <file_offset>`.

Whenever we see a WRITE record, we add a new entry to the hash table,
which indicates where in the stream file to find the WRITE record for
this block. (The key is `drr_toguid, drr_object, drr_offset`.)

For entries other than WRITE_BYREF, we pass them through unchanged
(except for the running checksum, which is recalculated).

For WRITE_BYREF records, we change them to WRITE records.  We find the
referenced WRITE record by looking in the hash table (for the record
with key `drr_refguid, drr_refobject, drr_refoffset`), and then reading
the record header and payload from the specified offset in the stream
file.  This is why the stream can not be a pipe.  The found WRITE record
replaces the WRITE_BYREF record, with its `drr_toguid`, `drr_object`,
and `drr_offset` fields changed to be the same as the WRITE_BYREF's
(i.e. we are writing the same logical block, but with the data supplied
by the previous WRITE record).

This algorithm requires memory proportional to the number of WRITE
records (same as `zfs send -D`), but the size per WRITE record is
relatively low (40 bytes, vs. 72 for `zfs send -D`).  A 1TB send stream
with 8KB blocks (`recordsize=8k`) would use around 5GB of RAM to
"redup".

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10124 
Closes #10156
2020-04-10 10:39:55 -07:00
George Amanakis 77f6826b83
Persistent L2ARC
This commit makes the L2ARC persistent across reboots. We implement
a light-weight persistent L2ARC metadata structure that allows L2ARC
contents to be recovered after a reboot. This significantly eases the
impact a reboot has on read performance on systems with large caches.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Saso Kiselkov <skiselkov@gmail.com>
Co-authored-by: Jorgen Lundman <lundman@lundman.net>
Co-authored-by: George Amanakis <gamanakis@gmail.com>
Ported-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #925 
Closes #1823 
Closes #2672 
Closes #3744 
Closes #9582
2020-04-10 10:33:35 -07:00
alex 2a15c6aab4
libzfs_pool: Remove unused check for ENOTBLK
Commit 379ca9c removed the check on aux devices to be block devices also
changing zfs_ioctl(hdl, ZFS_IOC_VDEV_ADD, ...) and
zfs_ioctl(hdl, ZFS_IOC_POOL_CREATE, ...) to never set ENOTBLK. This
change removes the dangling check for ENOTBLK that will never trigger.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Alex John <alex@stty.io>
Closes #10173
2020-04-07 10:04:40 -07:00
Paul Dagnelie 5a42ef04fd
Add 'zfs wait' command
Add a mechanism to wait for delete queue to drain.

When doing redacted send/recv, many workflows involve deleting files 
that contain sensitive data. Because of the way zfs handles file 
deletions, snapshots taken quickly after a rm operation can sometimes 
still contain the file in question, especially if the file is very 
large. This can result in issues for redacted send/recv users who 
expect the deleted files to be redacted in the send streams, and not 
appear in their clones.

This change duplicates much of the zpool wait related logic into a 
zfs wait command, which can be used to wait until the internal
deleteq has been drained.  Additional wait activities may be added 
in the future. 

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #9707
2020-04-01 10:02:06 -07:00
Matthew Ahrens 3f38797338
Compile cityhash code into libzfs
Make the cityhash code compile into libzfs, in preparation for the new
"zstream" command.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10152
2020-03-27 09:11:22 -07:00
Matthew Ahrens 652bdc9b0e
Deprecate deduplicated send streams
Dedup send can only deduplicate over the set of blocks in the send
command being invoked, and it does not take advantage of the dedup table
to do so. This is a very common misconception among not only users, but
developers, and makes the feature seem more useful than it is. As a
result, many users are using the feature but not getting any benefit
from it.

Dedup send requires a nontrivial expenditure of memory and CPU to
operate, especially if the dataset(s) being sent is (are) not already
using a dedup-strength checksum.

Dedup send adds developer burden. It expands the test matrix when
developing new features, causing bugs in released code, and delaying
development efforts by forcing more testing to be done.

As a result, we are deprecating the use of `zfs send -D` and receiving
of such streams.  This change adds a warning to the man page, and also
prints the warning whenever dedup send or receive are used.

In a future release, we plan to:
1. remove the kernel code for generating deduplicated streams
2. make `zfs send -D` generate regular, non-deduplicated streams
3. remove the kernel code for receiving deduplicated streams
4. make `zfs receive` of deduplicated streams process them in userland
   to "re-duplicate" them, so that they can still be received.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #7887 
Closes #10117
2020-03-18 13:31:10 -07:00
Ryan Moeller 22df2457a7
Avoid core dump on invalid redaction bookmark
libzfs aborts and dumps core on EINVAL from the kernel when trying to
do a redacted send with a bookmark that is not a redaction bookmark.

Move redacted bookmark validation into libzfs.

Check if the bookmark given for redactions is actually a redaction
bookmark.  Print an error message and exit gracefully if it is not.

Don't abort on EINVAL in zfs_send_one.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10138
2020-03-18 12:54:12 -07:00
Paul Dagnelie 7145123b0a
Separate warning for incomplete and corrupt streams
This change adds a separate return code to zfs_ioc_recv that is used 
for incomplete streams, in addition to the existing return code for 
streams that contain corruption.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10122
2020-03-17 10:30:33 -07:00
Mariusz Zaborski a57d3d45d6
Add option for forcible unmounting dataset while receiving snapshot.
Currently when the dataset is in use we can't receive snapshots.

    zfs send test/1@asd | zfs recv -FM test/2
    cannot unmount '/test/2': Device busy

This commits add option 'M' which attempts to forcibly unmount the
dataset.  Thanks to this we can enforce receiving snapshots in a
single step.

Note that this functionality is not supported on Linux because the
VFS will prevent active mounted filesystems from being unmounted,
even with the force option.  This is the intended VFS behavior.

Test cases were added to verify the expected behavior based on
the platform.

Discussed-with: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
External-issue: https://reviews.freebsd.org/D22306
Closes #9904
2020-03-17 10:08:32 -07:00
Ryan Moeller 4d32abaa87
libzfs: Fix bounds checks for float parsing
UINT64_MAX is not exactly representable as a double.

The closest representation is UINT64_MAX + 1, so we can use a >=
comparison instead of > for the bounds check.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10127
2020-03-16 11:56:29 -07:00
Ryan Moeller f5f6fb03b7
Change default to overlay=on
Filesystems allow overlay mounts by default on FreeBSD and Linux.

Respect the native convention by switching the default to overlay=on,
while retaining the option to turn the property off for compatibility
with other operating systems' conventions.

Update documentation and tests accordingly.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10030
2020-03-06 09:28:19 -08:00
Brian Behlendorf 2288d41968
Add trim support to zpool wait
Manual trims fall into the category of long-running pool activities
which people might want to wait synchronously for. This change adds
support to 'zpool wait' for waiting for manual trim operations to
complete. It also adds a '-w' flag to 'zpool trim' which can be used to
turn 'zpool trim' into a synchronous operation.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #10071
2020-03-04 15:07:11 -08:00
Matthew Ahrens b3212d2fa6
Improve performance of zio_taskq_member
__zio_execute() calls zio_taskq_member() to determine if we are running
in a zio interrupt taskq, in which case we may need to switch to
processing this zio in a zio issue taskq.  The call to
zio_taskq_member() can become a performance bottleneck when we are
processing a high rate of zio's.

zio_taskq_member() calls taskq_member() on each of the zio interrupt
taskqs, of which there are 21.  This is slow because each call to
taskq_member() does tsd_get(taskq_tsd), which on Linux is relatively
slow.

This commit improves the performance of zio_taskq_member() by having it
cache the value of tsd_get(taskq_tsd), reducing the number of those
calls to 1/21th of the current behavior.

In a test case running `zfs send -c >/dev/null` of a filesystem with
small blocks (average 2.5KB/block), zio_taskq_member() was using 6.7% of
one CPU, and with this change it is reduced to 1.3%.  Overall time to
perform the `zfs send` reduced by 10% (~150,000 block/sec to ~165,000
blocks/sec).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10070
2020-03-03 10:29:38 -08:00
Matthew Macy d32eff3a27
Don't open zfs control device exclusively
With the FreeBSD platform changes that were made for #10073
it is no longer necessary on FreeBSD to open the control device
exclusively to get onexit callbacks invoked.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10076
2020-02-28 14:54:14 -08:00
Brian Behlendorf 2c3a83701d Linux 5.6 compat: time_t
As part of the Linux kernel's y2038 changes the time_t type has been
fully retired.  Callers are now required to use the time64_t type.

Rather than move to the new type, I've removed the few remaining
places where a time_t is used in the kernel code.  They've been
replaced with a uint64_t which is already how ZFS internally
handled these values.

Going forward we should work towards updating the remaining user
space time_t consumers to the 64-bit interfaces.

Reviewed-by: Matthew Macy <mmacy@freebsd.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10052
Closes #10064
2020-02-27 09:31:02 -08:00
Jason King 13b5a4d5c0
Support setting user properties in a channel program
This adds support for setting user properties in a
zfs channel program by adding 'zfs.sync.set_prop'
and 'zfs.check.set_prop' to the ZFS LUA API.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Co-authored-by: Sara Hartse <sara.hartse@delphix.com>
Contributions-by: Jason King <jason.king@joyent.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Jason King <jason.king@joyent.com>
Closes #9950
2020-02-14 13:41:42 -08:00
Ryan Moeller e7be5c47bd
Move zfs_version_kernel to platform code
Linux uses sysfs to determine the module version, FreeBSD uses a
different method.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9978
2020-02-12 13:00:19 -08:00
Christian Schwarz a73f361fdb Implement bookmark copying
This feature allows copying existing bookmarks using

    zfs bookmark fs#target fs#newbookmark

There are some niche use cases for such functionality,
e.g. when using bookmarks as markers for replication progress.

Copying redaction bookmarks produces a normal bookmark that
cannot be used for redacted send (we are not duplicating
the redaction object).

ZCP support for bookmarking (both creation and copying) will be
implemented in a separate patch based on this work.

Overview:

- Terminology:
    - source = existing snapshot or bookmark
    - new/bmark = new bookmark
- Implement bookmark copying in `dsl_bookmark.c`
  - create new bookmark node
  - copy source's `zbn_phys` to new's `zbn_phys`
  - zero-out redaction object id in copy
- Extend existing bookmark ioctl nvlist schema to accept
  bookmarks as sources
  - => `dsl_bookmark_create_nvl_validate` is authoritative
- use `dsl_dataset_is_before` check for both snapshot
  and bookmark sources
- Adjust CLI
  - refactor shortname expansion logic in `zfs_do_bookmark`
- Update man pages
  - warn about redaction bookmark handling
- Add test cases
  - CLI
  - pyyzfs libzfs_core bindings

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9571
2020-02-11 13:19:12 -08:00
Attila Fülöp 31b160f0a6
ICP: Improve AES-GCM performance
Currently SIMD accelerated AES-GCM performance is limited by two
factors:

a. The need to disable preemption and interrupts and save the FPU
state before using it and to do the reverse when done. Due to the
way the code is organized (see (b) below) we have to pay this price
twice for each 16 byte GCM block processed.

b. Most processing is done in C, operating on single GCM blocks.
The use of SIMD instructions is limited to the AES encryption of the
counter block (AES-NI) and the Galois multiplication (PCLMULQDQ).
This leads to the FPU not being fully utilized for crypto
operations.

To solve (a) we do crypto processing in larger chunks while owning
the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced
to make this chunk size tweakable. It defaults to 32 KiB. This step
alone roughly doubles performance. (b) is tackled by porting and
using the highly optimized openssl AES-GCM assembler routines, which
do all the processing (CTR, AES, GMULT) in a single routine. Both
steps together result in up to 32x reduction of the time spend in
the en/decryption routines, leading up to approximately 12x
throughput increase for large (128 KiB) blocks.

Lastly, this commit changes the default encryption algorithm from
AES-CCM to AES-GCM when setting the `encryption=on` property.

Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-By: Jason King <jason.king@joyent.com>
Reviewed-By: Tom Caputi <tcaputi@datto.com>
Reviewed-By: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #9749
2020-02-10 12:59:50 -08:00
Romain Dolbeau af09c050e9
Fix static data to link with -fno-common
-fno-common is the new default in GCC 10, replacing -fcommon in
GCC <= 9, so static data must only be allocated once.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes #9943
2020-02-06 09:25:29 -08:00
Matthew Ahrens ec21397127
async zvol minor node creation interferes with receive
When we finish a zfs receive, dmu_recv_end_sync() calls
zvol_create_minors(async=TRUE).  This kicks off some other threads that
create the minor device nodes (in /dev/zvol/poolname/...).  These async
threads call zvol_prefetch_minors_impl() and zvol_create_minor(), which
both call dmu_objset_own(), which puts a "long hold" on the dataset.
Since the zvol minor node creation is asynchronous, this can happen
after the `ZFS_IOC_RECV[_NEW]` ioctl and `zfs receive` process have
completed.

After the first receive ioctl has completed, userland may attempt to do
another receive into the same dataset (e.g. the next incremental
stream).  This second receive and the asynchronous minor node creation
can interfere with one another in several different ways, because they
both require exclusive access to the dataset:

1. When the second receive is finishing up, dmu_recv_end_check() does
dsl_dataset_handoff_check(), which can fail with EBUSY if the async
minor node creation already has a "long hold" on this dataset.  This
causes the 2nd receive to fail.

2. The async udev rule can fail if zvol_id and/or systemd-udevd try to
open the device while the the second receive's async attempt at minor
node creation owns the dataset (via zvol_prefetch_minors_impl).  This
causes the minor node (/dev/zd*) to exist, but the udev-generated
/dev/zvol/... to not exist.

3. The async minor node creation can silently fail with EBUSY if the
first receive's zvol_create_minor() trys to own the dataset while the
second receive's zvol_prefetch_minors_impl already owns the dataset.

To address these problems, this change synchronously creates the minor
node.  To avoid the lock ordering problems that the asynchrony was
introduced to fix (see #3681), we create the minor nodes from open
context, with no locks held, rather than from syncing contex as was
originally done.

Implementation notes:

We generally do not need to traverse children or prefetch anything (e.g.
when running the recv, snapshot, create, or clone subcommands of zfs).
We only need recursion when importing/opening a pool and when loading
encryption keys.  The existing recursive, asynchronous, prefetching code
is preserved for use in these cases.

Channel programs may need to create zvol minor nodes, when creating a
snapshot of a zvol with the snapdev property set.  We figure out what
snapshots are created when running the LUA program in syncing context.
In this case we need to remember what snapshots were created, and then
try to create their minor nodes from open context, after the LUA code
has completed.

There are additional zvol use cases that asynchronously own the dataset,
which can cause similar problems.  E.g. changing the volmode or snapdev
properties.  These are less problematic because they are not recursive
and don't touch datasets that are not involved in the operation, there
is still potential for interference with subsequent operations.  In the
future, these cases should be similarly converted to create the zvol
minor node synchronously from open context.

The async tasks of removing and renaming minors do not own the objset,
so they do not have this problem.  However, it may make sense to also
convert these operations to happen synchronously from open context, in
the future.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-65948
Closes #7863
Closes #9885
2020-02-03 09:33:14 -08:00
Romain Dolbeau 35b07497c6 Add AltiVec RAID-Z
Implements the RAID-Z function using AltiVec SIMD.
This is basically the NEON code translated to AltiVec.

Note that the 'fletcher' algorithm requires 64-bits
operations, and the initial implementations of AltiVec
(PPC74xx a.k.a. G4, PPC970 a.k.a. G5) only has up to
32-bits operations, so no 'fletcher'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes #9539
2020-01-23 11:01:24 -08:00
Matthew Macy 5206b8228e Disable get_numeric_property for xattr on FreeBSD
FreeBSD doesn't have a mount flag for determining the
disposition of xattr. Disable so that it is fetched
by the default route so that 'zfs get xattr' returns
the correct value.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9862
2020-01-21 15:06:10 -08:00
Matthew Macy d3c1e45b7a Re-consolidate zio_delay_interrupt
With recent SPL changes there is no longer any need for a per
platform version.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9860
2020-01-21 15:04:13 -08:00
Brian Behlendorf 70835c5b75
Unify target_cpu handling
Over the years several slightly different approaches were used
in the Makefiles to determine the target architecture.  This
change updates both the build system and Makefile to handle
this in a consistent fashion.

TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64
and made available in the Makefiles to be used as appropriate.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9848
2020-01-17 12:40:09 -08:00
Kyle Evans 68a192e4b7 libzfs: add zfs_mount_at() function
zfs_mount_at() mounts a dataset at an arbitrary mountpoint rather than
at the configured mountpoint. This may be used by consumers that wish to
temporarily expose a dataset at another mountpoint without altering
dataset/pool properties.

This will be used by FreeBSD's libbe be_mount(), which mounts a boot
environment at an arbitrary mountpoint.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes #9833
2020-01-14 08:49:54 -08:00
Brian Behlendorf e458fcca75
Change http://zfsonlinux.org links to https://zfsonlinux.org
Update the project website links contained in to repository to
reference the secure https://zfsonlinux.org address.

Reviewed-By: Richard Laager <rlaager@wiktel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9837
2020-01-13 16:43:59 -08:00
Tom Caputi ba0ba69e50 Add 'zfs send --saved' flag
This commit adds the --saved (-S) to the 'zfs send' command.
This flag allows a user to send a partially received dataset,
which can be useful when migrating a backup server to new
hardware. This flag is compatible with resumable receives, so
even if the saved send is interrupted, it can be resumed.
The flag does not require any user / kernel ABI changes or any
new feature flags in the send stream format.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Christian Schwarz <me@cschwarz.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9007
2020-01-10 10:16:58 -08:00
Nick Black 8cda5c5ce9 libspl: declare aok extern in header
Rather than defining a new instance of 'aok' in every compilation
unit which includes this header, there is a single instance
defined in zone.c, and the header now only declares an extern.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Nick Black <dankamongmen@gmail.com>
Closes #9752
2019-12-26 10:52:14 -08:00
Tony Hutter 9fb2771aa5 Colorize zpool status output
If the ZFS_COLOR env variable is set, then use ANSI color
output in zpool status:

- Column headers are bold
- Degraded or offline pools/vdevs are yellow
- Non-zero error counters and faulted vdevs/pools are red
- The 'status:' and 'action:' sections are yellow if they're
  displaying a warning.

This also includes a new 'faketty' function in libtest.shlib that is
compatible with FreeBSD (code provided by @freqlabs).

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #9340
2019-12-19 16:26:07 -08:00
Brian Behlendorf fe20400db5 cppcheck: (error) Memory leak: vtoc
Resolve the reported memory leak by using a dedicated local vptr
variable to store the pointer reported by calloc().  Only assign the
passed **vtoc function argument on success, in all other cases vptr
is freed.

[lib/libefi/rdwr_efi.c:403]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:422]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:440]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:454]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:470]: (error) Memory leak: vtoc

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:25:04 -08:00
Matthew Macy 4bc721965f Add FreeBSD jail support hooks
Add the 'zfs jail/unjail' subcommands along with the relevant 
documentation from FreeBSD.  This feature is not supported on
Linux and still requires the match kernel ioctls which will
be included when the FreeBSD platform code is integrated.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9686
2019-12-11 11:58:37 -08:00
Matthew Macy 2a8ba608d3 Replace ASSERTV macro with compiler annotation
Remove the ASSERTV macro and handle suppressing unused 
compiler warnings for variables only in ASSERTs using the 
__attribute__((unused)) compiler annotation.  The annotation
is understood by both gcc and clang.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9671
2019-12-05 12:37:00 -08:00
Matthew Macy be627fc847 Refactor zfs_context.h to build on FreeBSD
- on Linux move Linux specific headers to zfs_context_os.h
- on FreeBSD move FreeBSD specific definitions to zfs_context_os.h
- remove duplicate tsd_ definitions
- remove unused AT_TYPE

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9668
2019-12-04 13:12:57 -08:00
Brian Behlendorf 624222ae31
Increase allowed 'special_small_blocks' maximum value
There may be circumstances where it's desirable that all blocks
in a specified dataset be stored on the special device.  Relax
the artificial 128K limit and allow the special_small_blocks
property to be set up to 1M.  When blocks >1MB have been enabled
via the zfs_max_recordsize module option, this limit is increased
accordingly.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9131
Closes #9355
2019-12-03 09:58:03 -08:00
Matthew Macy c54687cd23 Make asm-x86_64/atomic.S build on FreeBSD
Include the required headers for FreeBSD.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9634
2019-11-30 15:42:00 -08:00
Matthew Macy f348c78f97 Mark Linux fallocate extensions as specific to Linux
fallocate(2) is a Linux-specific system call which in unavailable
on other platforms.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9633
2019-11-30 15:40:22 -08:00
Paul Zuchowski 7c1bf0cf27 Implement -A (ignore ASSERTs) for zdb
The command line switch -A (ignore ASSERTs) has always been available 
in zdb but was never connected up to the correct global variable.

There are times when you need zdb to ignore asserts and keep dumping 
out whatever information it can get despite the ASSERT(s) failing. 
It was always intended to be part of zdb but was incomplete.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #9610
2019-11-27 10:45:56 -08:00
Matthew Macy da92d5cbb3 Add zfs_file_* interface, remove vnodes
Provide a common zfs_file_* interface which can be implemented on all 
platforms to perform normal file access from either the kernel module
or the libzpool library.

This allows all non-portable vnode_t usage in the common code to be 
replaced by the new portable zfs_file_t.  The associated vnode and
kobj compatibility functions, types, and macros have been removed
from the SPL.  Moving forward, vnodes should only be used in platform
specific code when provided by the native operating system.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9556
2019-11-21 09:32:57 -08:00
InsanePrawn cc1a1e17d9 Remove inappropiate error message suggesting to use '-r'
Removes an incorrect error message from libzfs that suggests applying
'-r' when a zfs subcommand is called with a filesystem path while
expecting either a snapshot or bookmark path.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes #9574
2019-11-15 09:52:11 -08:00
Brian Behlendorf 94a570e39c
Fix `zpool create -o <property>` error message
When `zpool create -o <property>` is run without root permissions
and the pool property requested is not specifically enumerated in
zpool_valid_proplist().  Then an incorrect error message referring
to an invalid property is printed rather than the expected permission
denied error.

Specifying a pool property at create time should be handled the same
way as filesystem properties in zfs_valid_proplist().  There should
not be default zfs_error_aux() set for properties which are not
listed.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9550 
Closes #9568
2019-11-13 09:23:14 -08:00
Matthew Macy 1f2f46be95 Add wrapper stub for zfs_cmd ioctl to libzpool
FreeBSD needs a wrapper for handling zfs_cmd ioctls.
In libzfs this is handled by zfs_ioctl. However, here
we need to wrap the call directly.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9511
2019-11-12 10:40:39 -08:00