db65272ae was added to zfs-2.2.4 to stub in the
VDEV_PROP_RAIDZ_EXPANDING enum without adding the RAIDz expansion
feature. This was needed to provide the right enum count for when the
VDEV_PROP_SLOW_IO proprieties got added. This had the unfortunate side
effect of breaking module removal though.
Specifically, with the VDEV_PROP_RAIDZ_EXPANDING stub added,
the module would correctly omit making kobjects for the RAIDz expansion
vdev property, but then would try to blindly remove its non-existent
kobjects during module unload.
This commit fixes the issue by checking for an uninitialized kobject.
Fixes: #16249
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
- Explicitly disable compression since mkfile uses a zero buffer.
- Explicitly sync file systems instead of waiting for timeout.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This is a follow-on to 156a64161b
that ignores UBSAN errors in sa.c.
Thank you @thwalker3 for the fix.
Original-patch-by: @thwalker3
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16278Closes#16330
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
For files smaller than recordsize, it's most likely that they don't have
L1 blocks. However, current calculation will always return at least 1 L1
block.
In this change, we check dnode level to figure out if it has L1 blocks
or not, and return 0 if it doesn't. This will reduce the chance of
unnecessary throttling when deleting a large number of small files.
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Co-authored-by: Chunwei Chen <david.chen@nutanix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This way we can avoid making assumptions about the SDT probe
implementation. No functional change intended.
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
These are used for DDT and BRT stores. There's limited information
available to produce meaningful output, but at least we can put
something on screen rather than crashing.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
After c3f2f1aa2, vdev_fault_wanted is set on a vdev after a probe fails.
An end-of-txg async task is charged with actually faulting the vdev.
In a single-disk pool, the probe failure will degrade the last disk, and
then suspend the pool. However, vdev_fault_wanted is not cleared. After
the pool returns, the transaction finishes and the async task runs and
faults the vdev, which suspends the pool again.
The fix is simple: when reopening a vdev, clear the async fault flag. If
the vdev is still failed, the startup probe will quickly notice and
degrade/suspend it again. If not, all is well!
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@klarasystems.com>
A single disk pool should suspend when its disk fails and hold the IO.
When the disk is returned, the pool should return and the IO be
reissued, leaving everything in good shape.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@klarasystems.com>
Previously the dkms build left some unwanted files
in `/usr/lib/modules` which could cause package
managers to not properly clean up old kernels.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Wagner <martin.wagner.dev@gmail.com>
Closes#16221Closes#16241
- Add old eviction for special and dedup metaslab classes. Those
vdevs may be potentially big and fragmented with large metaslabs,
while their asynchronous write pattern is not really different
from normal class. It seems an omission to not evict old metaslabs
from them.
- If we have metaslab preload enabled, which means we are not too
low on memory, do not evict active metaslabs even if they are not
used for some time. Eviction of active metaslabs means we won't
be able to write anything until we load them, that may take some
time, that is straight opposite to metaslab preload goals. For
small systems the memory saving should be less important after
recent reduction in number of allocators and so open metaslabs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16214
In case of error dmu_buf_fill_done() returns the buffer back into
DB_UNCACHED state. Since during transition from DB_UNCACHED into
DB_FILL state dbuf_noread() allocates an ARC buffer, we must free
it here, otherwise it will be leaked.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15665Closes#15802Closes#16216
C99 6.7.8.17 says that when an undesignated initialiser is used, only
the first element of a union is initialised. If the first element is not
the largest within the union, how the remaining space is initialised is
up to the compiler.
GCC extends the initialiser to the entire union, while Clang treats the
remainder as padding, and so initialises according to whatever
automatic/implicit initialisation rules are currently active.
When Linux is compiled with CONFIG_INIT_STACK_ALL_PATTERN,
-ftrivial-auto-var-init=pattern is added to the kernel CFLAGS. This flag
sets the policy for automatic/implicit initialisation of variables on
the stack.
Taken together, this means that when compiling under
CONFIG_INIT_STACK_ALL_PATTERN on Clang, the "zero" initialiser will only
zero the first element in a union, and the rest will be filled with a
pattern. This is significant for aes_ctx_t, which in
aes_encrypt_atomic() and aes_decrypt_atomic() is initialised to zero,
but then used as a gcm_ctx_t, which is the fifth element in the union,
and thus gets pattern initialisation. Later, it's assumed to be zero,
resulting in a hang.
As confusing and undiscoverable as it is, by the spec, we are at fault
when we initialise a structure containing a union with the zero
initializer. As such, this commit replaces these uses with an explicit
memset(0).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16135Closes#16206
ztest has a very nice ability to show a backtrace when there's an
unexpected crash. zdb is used often enough on corrupted data and can
blow up too, so nice output is useful there too.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16181
The pthread_* functions are in -lpthread on FreeBSD. Some of them are
implicitly linked through libc, but on FreeBSD 13 at least
pthread_getname_np() is not. Just be explicit, since -lpthread is the
documented interface anyway.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16168
MacOS used FreeBSD-compatible getprogname() and pthread_getname_np().
But pthread_getthreadid_np() does not exist on MacOS. This implements
libspl_gettid() using pthread_threadid_np() to get the thread id
of the current thread.
Tested with FreeBSD GitHub actions
freebsd-src/.github/workflows/cross-bootstrap-tools.yml
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#16167
libunwind seems to do a better job of resolving a symbols than
backtrace(), and is also useful on platforms that don't have backtrace()
(eg musl). If it's available, use it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16140
Adds a check for the backtrace() function. If available, uses it to show
a stack backtrace in the assertion output.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16140
If multiple threads trip an assertion at the same moment (quite common),
they can be printing at the same time, and their output gets messy.
This adds a simple lock around the whole thing, to prevent a second task
printing assert output before the first has finished.
Additionally, if libspl_assert_ok is not set, abort() is called without
dropping the lock, so that any other asserting tasks will be killed
before starting any output, rather than only getting part-way through.
This is a tradeoff; it's assumed that multiple threads asserting at the
same moment are likely the same fault in different instances of a
thread, and so there won't be any more useful information from the other
tasks anyway.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16140
Makes it much easier to see what thing complained.
Getting thread id, program name and thread name vary wildly between
Linux and FreeBSD, so those are set up in macros. pthread_getname_np()
did not appear in musl until very recently, but the same info has always
been available via prctl(PR_GET_NAME), so we use that instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16140
Check for the existence of execvpe(3) and only provide the FreeBSD
compat version if required.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#15609
The "not found" path is attempting to clear SOMELIB_CFLAGS and
SOMELIB_LIBS by resetting them in AC_SUBST(). However, the second arg to
AC_SUBST is expanded in autoconf with `m4_ifvaln([$2], [[$1]=$2])`,
which is defined as "if the first arg is non-empty". The m4 "empty"
construction is [], therefore, the existing AC_SUBST calls never modify
the variables at all.
The effect of this is that leftovers from the library test can leak out.
At least, if a library header is found in the first stage, but the
library itself is not, -lsomelib is added to SOMELIB_LIBS and further
tests done. If that library is not found, SOMELIB_LIBS will not be
cleared.
For most of our library tests this hasn't been a problem, as they're
either always found properly via pkg-config or set directly, or the
calling test immediately aborts configure. For an optional dependency
however, an apparent "partial" result where the header is found but no
corresponding library causes link errors later.
I think a complete fix should probably not be setting SOMELIB_xxx until
the final result is known, but for now, adjusting the AC_SUBST calls to
explictly set the empty shell string (which is not "empty" to m4) at
least restores the intent.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16140
Previously, abd_iter_page() would assume that every scatterlist would
contain a single page (compound or no), because that's all we ever
create in abd_alloc_chunks(). However, scatterlists can contain multiple
pages of arbitrary provenance, and if we get one of those, we'd get all
the math wrong.
This reworks things to handle multiple pages in a scatterlist, by
properly finding the right page within it for the given offset, and
understanding better where the end of the page is and not crossing it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reported-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16108
The test runner accumulates output from individual tests, then writes it
to the log at the end. If a test hangs or crashes the system half way
through, we get no insight into how it got to where it did.
This adds a -D option for "debug". When set, all test output is written
to stdout.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16096
Specifying a single test is kind of a hassle, because the full relative
path under the test suite dir has to be included, but it's not always
clear what that path even is.
This change allows `-t` to take the name of a single test instead of a
full path. If the value has no `/` characters, we search for a file of
that name under the test root, and if found, use that as the full test
path instead.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16088
On fedora 40, on the 6.9.4 kernel (in updates-testing), assign_str
expands to a "do {<stuff> } while(0)" loop. Without this semicolon,
the while(0) is unterminated, causing a cascade of useless errors.
With this semicolon, it compiles fine. It also compiles fine on 6.8.11
(the previous kernel). I have not tested earlier kernels than that, but
at worst it should add a pointless semicolon.
All other instances in the source tree are already terminated with
semicolons.
Signed-off-by: Daniel Berlin <dberlin@dberlin.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This commit fixes what is probably a copy-paste mistake. The
`dracut.zfs` manpage claims that the `bootfs.rollback` option executes
`zfs snapshot -Rf`. `zfs snapshot` does not have a `-R` option. `zfs
rollback` does.
Signed-off-by: Alphan Yılmaz <alphanyilmaz@gmail.com>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update the META file to reflect compatibility with the 6.9
kernel.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
FreeBSD patchlevel versions are optional and, if present, in a different
location in the version string.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
We're seeing failures for redacted_deleted and redacted_mount
on FreeBSD 13-15:
09:58:34.74 diff: /dev/fd/3: No such file or directory
09:58:34.74 ERROR: diff /dev/fd/3 /dev/fd/4 exited 2
The test was trying to diff the file listings between two directories to
see if they are the same. The workaround is to do a string comparison
of the directory listings instead of using `diff`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16224
This helper was introduced long ago, in 5.16. Since 6.10, bd_inode no
longer exists, but the helper has been updated, so detect it and use it
in all versions where it is available.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux 6.10 change kmem_cache_alloc to be a macro, rather than a
function, such that the old #undef for it in spl-kmem-cache.c would
remove its definition completely, breaking the build.
This inverts the model used before. Rather than always defining the
kmem_cache_* macro, then undefining then inside spl-kmem-cache.c,
instead we make a special tag to indicate we're currently inside
spl-kmem-cache.c, and not defining those in macros in the first place,
so we can use the kernel-supplied kmem_cache_* functions to implement
spl_kmem_cache_*, as we expect.
For all other callers, we create the macros as normal and remove access
to the kernel's own conflicting names.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux has started moving to a model where instead of applying block
queue limits through individual modification functions, a complete
limits structure is built up and applied atomically, either when the
block device or open, or some time afterwards. As of 6.10 this
transition appears only partly completed.
This commit matches that model within OpenZFS in a way that should work
for past and future kernels. We set up a queue limits structure with any
limits that have had their modification functions removed. For newer
kernels that can have limits applied at block device open
(HAVE_BLK_ALLOC_DISK_2ARG), we have a conversion function to turn the
OpenZFS queue limits structure into Linux's queue_limits structure,
which can then be passed in. For older kernels, we provide an
application function that just calls the old functions for each limit in
the structure.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
You can use the UBSAN_SANITIZE_* Kbuild options to exclude certain
kernel objects from the UBSAN checks. We previously excluded
zap_micro.o with:
UBSAN_SANITIZE_zap_micro.o := n
For some reason that didn't work for the 6.9 kernel, which wants us
to use:
UBSAN_SANITIZE_zfs/zap_micro.o := n
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16278Closes#16330
The 6.9 kernel behaves differently in how it releases block devices. In
the common case it will async release the device only after the return
to userspace. This is different from the 6.8 and older kernels which
release the block devices synchronously. To get around this, call
add_disk() from a workqueue so that the kernel uses a different
codepath to release our zvols in the way we expect. This stops
zfs_allow_010_pos from hanging.
Fixes: #16089
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Since Linux 6.7 the kernel has defined intptr_t. Clang has
-Wtypedef-redefinition by default, which causes the build to fail
because we also have a typedef for intptr_t.
Since its better to use the kernel's if it exists, detect it and skip
our own.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16201
In the commit of the head_errlog feature we introduced a bug in
dsl_dataset_promote_sync(): we may dereference origin_head and hds, both
dereferencing ddpa after calling promote_sync() on ddpa.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#16272Closes#16273
At the end of l2arc_evict() fix an assertion in the case that l2ad_hand
+ distance == l2ad_end.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#16202Closes#16207
Originally Solaris didn't expect errors there, but they may happen
if we fail to add entry into ZAP. Linux fixed it in #7421, but it
was never fully ported to FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13215Closes#16138
Depending on kind of error zap_expand_leaf() may return with or
without valid leaf reference held. Make sure it returns NULL if
due to error it has no leaf to return. Make its callers to check
the returned leaf pointer, and release the leaf if it is not NULL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#12366Closes#16159
Previous code overengineered cloned range calculation by using
BP_GET_LSIZE(). The problem is that legacy holes don't have the
logical size, so result will be wrong. But we also don't need
to look on every block size, since they all must be identical.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16165
Code for pools before version 11 uses dmu_objset_find_dp() to scan
for children datasets/clones. It calls enqueue_clones_cb() and
enqueue_cb() callbacks in parallel from multiple taskq threads.
It ends up bad for scan_ds_queue_insert(), corrupting scn_queue
AVL-tree. Fix it by introducing a mutex to protect those two
scan_ds_queue_insert() calls. All other calls are done from the
sync thread and so serialized.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16162
As I understand just for being less predictable dnode hash includes
8 bits of objset pointer, starting at 6. But since objset_t is
more than 1KB in size, its allocations are likely aligned to 2KB,
that means 11 lower bits provide no entropy. Just take the 8 bits
starting from 11.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16131
There is no reason for these module parameters to be read-only.
Being modified they just apply on next pool import/creation, that
is useful for testing different values.
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16118
When compressed ARC is disabled, we may have to re-compress when
writing into L2ARC. If doing so we can't fit it into the original
physical size, we should just fail immediately, since even if it
may still fit into allocation size, its checksum will never match.
While there, refactor the code similar to other compression places
without using abd_return_buf_copy().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16038
In dbuf_read_verify_dnode_crypt():
- We don't need original dbuf locked there. Instead take a lock
on a dnode dbuf, that is actually manipulated.
- Block decryption for a dnode dbuf if it is currently being
written. ARC hash lock does not protect anonymous buffers, so
arc_untransform() is unsafe when used on buffers being written,
that may happen in case of encrypted dnode buffers, since they
are not copied by dbuf_dirty()/dbuf_hold_copy().
In dbuf_read():
- If the buffer is in flight, recheck its compression/encryption
status after it is cached, since it may need arc_untransform().
Tested-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16104
In P2ALIGN, the result would be incorrect when align is unsigned
integer and x is larger than max value of the type of align.
In that case, -(align) would be a positive integer, which means
high bits would be zero and finally stay zero after '&' when
align is converted to a larger integer type.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Qiuhao Chen <chenqiuhao1997@gmail.com>
Closes#15940
When renaming a zvol, insert it into zvol_htable using the new name, not
the old name. Otherwise some operations won't work. For example,
"zfs set volsize" while the zvol is open.
Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by: Alan Somers <asomers@FreeBSD.org>
Closes#16127Closes#16128
ZFS prefetch is currently governed by the zfs_prefetch_disable
tunable. However, this is a module-wide settings - if a specific
dataset benefits from prefetch, while others have issue with it,
an optimal solution does not exists.
This commit introduce the "prefetch" tri-state property, which enable
granular control (at dataset/volume level) for prefetching.
This patch does not remove the zfs_prefetch_disable, which remains
a system-wide switch for enable/disable prefetch. However, to avoid
duplication, it would be preferable to deprecate and then remove
the module tunable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Co-authored-by: Gionatan Danti <g.danti@assyoma.it>
Closes#15237Closes#15436
Simplify vdev probes in the zio_vdev_io_done context to
avoid holding the spa config lock for a long duration.
Also allow zpool clear if no evidence of another host
is using the pool.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#15839
Detail the import progress of log spacemaps as they can take a very
long time. Also grab the spa_note() messages to, as they provide
insight into what is happening
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Closes#15539
Currently, zpool add allows users to add top-level vdevs that have
different ashifts but doing so prevents users from being able to
perform a top-level vdev removal. Often times consumers may not realize
that they have mismatched ashifts until the top-level removal fails.
This feature adds ashift validation to the zpool add command and will
fail the operation if the sector size of the specified vdev does not
match the existing pool. This behavior can be disabled by using the -f
flag. In addition, new flags have been added to provide fine-grained
control to disable specific checks. These flags
are:
--allow-in-use
--allow-ashift-mismatch
--allow-replicaton-mismatch
The force flag will disable all of these checks.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Maybee <mmaybee@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#15509
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16141
arc_summary also reports zfetch stats but it's inconvenient to monitor
contiguously incrementing numbers. Adding them in arcstats allows us to
observe streams more conveniently.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16094
- Workaround dangling pointer in uu_list.c (#16124)
- Fix calloc() transposed arguments in zpool_vdev_os.c
- Make some temp variables unsigned to prevent triggering a
'-Werror=alloc-size-larger-than' error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16124Closes#16125
As for python-3.12 the distutils package has been deprecated.
The latest ax_python_devel.m4 macro from the autoconf archive
has been updated accordingly so let's pull in the new version.
We can also drop the changes made to our customized version
to continue if the development version is not installed since
this functionality has been included upstream.
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16126Closes#16129
Fix an error in zfs-kmod.spec that causes kmod-zfs packages not to
include the correct RPM requires/conflicts relationships. With this
change applied, RPM correctly no longer allows kmod-zfs & zfs-dkms
packages to be installed together.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Todd Seidelmann <18294602+seidelma@users.noreply.github.com>
Closes#16121
Compiling openzfs on aarch64 with gcc-8 and gcc-9 is failing currently.
See issue #14965 for deeper context.
On platforms without pointer authentication, .cfi_negate_ra_state can be
defined to a no-op:
https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=gdb/aarch64-tdep.c#l1413
I have tested this on Arm64 FreeBSD 13.2 and AlmaLinux-8.
Reviewed-by: Andrew Turner <andrew.turner4@arm.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14965Closes#15784
On ELF platforms there is a note to specify when an application or
library supports BTI. When linking one of these the linker needs
all input object files to have the note. If not it will not include
it in the output file.
Normally the compiler would generate it, but for assembly files we
need to do it our selves.
Add the note to the aarch64 sha256 and sha512 assembly files.
Tested by building with BTI enabled and using the -zbti-report=error
flag to lld that makes it an error if the note is missing.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrew Turner <andrew.turner4@arm.com>
Closes#16086
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason Lee <jasonlee@lanl.gov>
Closes#16074
In `zpool status -t`, scrub date/time is reported using the C locale,
while trim time is reported using the current one. This is inconsistent.
This patch fixes that.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Maxim Filimonov <che@bein.link>
Closes#15878Closes#15879
Slow disk response times can be indicative of a failing drive. ZFS
currently tracks slow I/Os (slower than zio_slow_io_ms) and generates
events (ereport.fs.zfs.delay). However, no action is taken by ZED,
like is done for checksum or I/O errors. This change adds slow disk
diagnosis to ZED which is opt-in using new VDEV properties:
VDEV_PROP_SLOW_IO_N
VDEV_PROP_SLOW_IO_T
If multiple VDEVs in a pool are undergoing slow I/Os, then it skips
the zpool_vdev_degrade().
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Rob Wing <rob.wing@klarasystems.com>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#15469
When UBSAN is active and OpenZFS is a debug build, the l_hash assert at
the bottom of zap_open_leaf() causes UBSAN to complain.
This follows the example in 786641dcf to shut it up.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15964
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@klarasystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15942
#16047 notes that include/os/freebsd/spl/rpc/xdr.h carried an
(apparently) incompatible license. While looking into it, it seems that
this file is actually unnecessary these days - FreeBSD's kernel XDR has
XDR_CONTROL, xdrmem_control and XDR_GET_BYTES_AVAIL, while userspace has
XDR_CONTROL and xdrmem_control, and our implementation of
XDR_GET_BYTES_AVAIL for libspl works nicely with it. So this removes
that file outright.
To keep the includes in nvpair.c tidy, I've made a few small adjustments
to the Linux headers. By definition, rpc/types.h provides bool_t and is
included before rpc/xdr.h, so I've created rpc/types.h for Linux. This
isn't necessary for userspace; both FreeBSD native and tirpc on Linux
already have these headers set up correctly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16047Closes#16051
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Jason Lee <jasonlee@lanl.gov>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16028Closes#16035
Fix RANDOM to not return zero.
Overwriting with `dd ... count=0` does not test anything.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16029
The recently added '-e' option (PR #15769) missed adding the
new option in the online `zpool status` help command. This
adds the options and reorders a couple of the other options
that were not listed alphabetically.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Cameron Harr <harr1@llnl.gov>
Closes#16008
arc_os.h and freebsd_event.h aren't included in release tarballs, so the
build fails on FreeBSD. This fixes it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15963
On Linux block devices used for vdevs will by partitioned. The block
device must be large enough for an 64M partition starting at offset
of 2048 sectors (part1), and a second 64M reserved partition at the
end of the device (part9).
This commit adds a capacity check when creating the GPT label to
immediately detect a device which is too small. With the existing
code this would be caught slightly latter when attempting to use
the partition. Catching it sooner let's us print a more useful error.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15898
These macros are similar to VERIFY0() and ASSERT0() but are intended
for pointers, and therefore use uintptr_t instead of int64_t.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Dag-Erling Smørgrav <des@FreeBSD.org>
Closes#15225
Chiefly:
- Remove unnecessary parentheses around variable names.
- Remove spaces between the type and variable in casts.
- Make the panic message for VERIFY0() reflect how the macro is used.
- Use %p to format pointers, except in Linux kernel code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Dag-Erling Smørgrav <des@FreeBSD.org>
Closes#15225
Let Debian use the sysv-rc variant of the script, even when OpenRC is
installed. Unlike on Gentoo, OpenRC on Debian consumes both the
sysv-rc scripts and OpenRC ones. ZFS initscripts on Debian should be
the sysv-rc version to provide most compatibility and to integrate
with the rest of initscripts for dependency tracking.
Restrict the substitution in the Makefile to the dedicated list.
This construct is inspired by Mo Zhou's detection of the execution
shell and follows the strategy of Peter in 6ef28c526b.
As of 2024, the initscripts are mostly relevant on Debian, Gentoo and
their derivatives.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Benda Xu <orv@debian.org>
Issue #8063
Issue #8204
Issue #8359Closes#15977
We recover the scope of $(SUBSTFILES) to explicitly control what files
are being generated from the corresponding .in.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Benda Xu <orv@debian.org>
Closes#15980
The commit b53077a added zfs_prepare_disk.8 to the wrong list
dist_man_MANS, in which @zfsexecdir@ will not be properly substituted.
This leads to wrong path in the manpage in generated release tarballs.
Reported-by: Benda Xu <orv@debian.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#15979
This commit adds support for mounting a dataset along with all of
it's children with '-R' flag for zfs mount. There can be scenarios
where we want to mount all datasets under one hierarchy instead of
mounting all datasets present on system with '-a' flag.
'-R' flag should work on all root and non-root datasets. Usage
information and man page has been updated for zfs mount. A test
for verifying the behavior for '-R' flag is also added.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16015
There's an extra nullable arg for queue limits. Detect it, and set it to
NULL. Similar change for blk_mq_alloc_disk(), now three args, same
treatment.
Error return now has error encoded in the return, so detect with
IS_ERR() and explicitly NULL our own return.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16027Closes#16033
bdev_open_by_path() is replaced by bdev_file_open_by_path(), which
returns a plain old struct file*. Release function is gone entirely; the
regular file release function fput() will take care of the bdev
specifics.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16027Closes#16033
43e8f6e37 introduced a subtle API misuse, in that it passed the output
from vdev_bdev_mode() back into itself. Fortunately, the
SPA_MODE_(READ|WRITE) bit values exactly map to the FMODE_(READ|WRITE) &
BLK_OPEN_(READ|WRITE) bit values, so it didn't result in a bug, but it
was hard to read and understand, so I cleaned it up.
In doing so, I noticed that the only call to vdev_bdev_mode() without
the "exclusive" flag set was in that misuse, and actually, we never do a
non-exclusive blkdev_get_by_path(). So I've just made exclusive be
always-on.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15995
In v5.18 `filemap_range_has_page` moved to `pagemap.h`
`pagemap.h` has been around since 3.10 so just include both
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16034
If a zvol has more than 15 partitions, the minor device number exhausts
the slot count reserved for partitions next to the zvol itself. As a
result, the minor number cannot be used to determine the partition
number for the higher partition, and doing so results in wrong named
symlinks being generated by udev.
Since the partition number is encoded in the block device name anyway,
let's just extract it from there instead.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#15904Closes#15970
currently, the linux kernel allows 2^20 minor devices per major device
number. ZFS reserves blocks of 2^4 minors per zvol: 1 for the zvol
itself, the other 15 for the first partitions of that zvol. as a result,
only 2^16 such blocks are available for use.
there are no checks in place to avoid overflowing into the major device
number when more than 2^16 zvols are allocated (with volmode=dev or
default). instead of ignoring this limit, which comes with all sorts of
weird knock-on effects, detect this situation and simply fail allocating
the zvol block device early on.
without this safeguard, the kernel will reject the attempt to create an
already existing block device, but ZFS doesn't handle this error and
gets confused about which zvol occupies which minor slot, potentially
resulting in kernel NULL derefs and other issues later on.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#16006
Update the META file to reflect compatibility with the 6.8 kernel.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Kernel documentation for the discard_granularity property says:
A discard_granularity of 0 means that the device does not support
discard functionality.
Some older kernels had drivers (notably loop, but also some USB-SATA
adapters) that would set the QUEUE_FLAG_DISCARD capability flag, but
have discard_granularity=0. Since 5.10 (torvalds/linux@b35fd7422c) the
discard entry point blkdev_issue_discard() has had a check for this,
which would immediately reject the call with EOPNOTSUPP, and throw a
scary diagnostic message into the log. See #16068.
Since 6.8, the block layer sets a non-zero default for
discard_granularity (torvalds/linux@3c407dc723), and a future kernel
will remove the check entirely[1].
As such, there's no good reason for us to enable discard when
discard_granularity=0. The kernel will never let the request go in
anyway; better that we just disable it so we can report it properly to
the user.
1. https://patchwork.kernel.org/project/linux-block/patch/20240312144826.1045212-2-hch@lst.de/
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit b181b2e604)
Previous code held ARC state sublist lock throughout all L2ARC
write process, which included number of allocations and even ZIO
issues. Being blocked in any of those places the code could also
block ARC eviction, that could cause OOM activation or even dead-
lock if system is low on memory or one is too fragmented.
Fix it by dropping the lock as soon as we see a block eligible
for L2ARC writing and pick it up later using earlier inserted
marker. While there, also reduce scope of hash lock, moving
ZIO allocation and other operations not requiring header access
out of it. All operations requiring header access move under
hash lock, since L2_WRITING flag does not prevent header eviction
only transition to arc_l2c_only state with L1 header.
To be able to manipulate sublist lock and marker as needed add few
more multilist functions and modify one.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16040
When after #16022 adding new range we aggregate more than two
existing ranges, that should be very rare, only if several streams
overlap, we may need to zero not the last range, but some earlier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16072
Syncing context should not depend on current state of dbuf, which
could already change several times in later transaction groups,
but rely solely on dirty record for the transaction group being
synced. Some of the checks seem already impossible, while instead
of others I think we should better check for absence of data in
the specific dirty record rather than DB_NOFILL.
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16057
Before this change speculative prefetcher was able to detect a stream
only if all of its accesses are perfectly sequential. It was easy to
implement and is perfectly fine for single-threaded applications.
Unfortunately multi-threaded network servers, such as iSCSI, SMB or
NFS usually have plenty of threads and may often reorder requests,
preventing successful speculation and prefetch.
This change allows speculative prefetcher to detect streams even if
requests are reordered by introducing a list of 9 non-contiguous
ranges up to 16MB ahead of current stream position and filling the
gaps as more requests arrive. It also allows stream to proceed
even with holes up to a certain configurable threshold (25%).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16022
Investigating read errors triggering panic fixed in #16042 I've
found that we have a race in a sync process between the moment
dirty record for cloned block is removed and the moment dbuf is
destroyed. If dmu_buf_hold_array_by_dnode() take a hold on a
cloned dbuf before it is synced/destroyed, then dbuf_read_impl()
may see it still in DB_NOFILL state, but without the dirty record.
Such case is not an error, but equivalent to DB_UNCACHED, since
the dbuf block pointer is already updated by dbuf_write_ready().
Unfortunately it is impossible to safely change the dbuf state
to DB_UNCACHED there, since there may already be another cloning
in progress, that dropped dbuf lock before creating a new dirty
record, protected only by the range lock.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Robert Evans <evansr@google.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16052
Previous code reported non-ZIO errors only via return value, but
not via parent ZIO. It could cause NULL-dereference panics due
to dmu_buf_hold_array_by_dnode() ignoring the return value,
relying solely on parent ZIO status.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reported by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16042
This should allow to catch some leaks, if those happen.
While there fix some cosmetic issues.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16007
It should not normally happen, but if it does, better to not fail
everything for no good reason, or it may be hard to debug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16007
- When reading L0 block pointers handle buffers without ones and
without dirty records as a holes. Those appear when dnode size
was increased, but the end was never written, so there are no new
indirection levels to store the pointers. It makes no sense to
return EAGAIN here, since sync won't create new indirection levels
until there will be actual writes.
- When cloning blocks set destination hole logical birth time
to the current TXG. Otherwise if we are cloning over existing
data, newly created holes may not be properly replicated later.
Use BP_SET_BIRTH() when possible to not replicate its logic.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15994Closes#16007
Unlike DDT, where ZAP values may have different lengths due to
compression, all BRT entries are identical 8-byte counters. It
does not make sense to first fetch the length only to assert it.
zap_lookup_uint64() is specifically designed to work with counters
of different size and should return error if something odd found.
Calling it straight allows to save some measurable CPU time.
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15950
Similar to DDT make BRT data and indirect block sizes configurable
via module parameters. I am not sure what would be the best yet,
but similar to DDT 4KB blocks kill all chances of compression on
vdev with ashift=12 or more, that on my tests reaches 3x.
While here, fix documentation for respective DDT parameters.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15967
Since brt_pending_apply() is running in syncing context, no other
brt_pending_tree accesses are possible for the TXG. We don't need
to acquire brt_pending_lock here.
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15955
Before this change ZAP called dnode_hold() for almost every block
access, that was clearly visible in profiler under heavy load, such
as BRT. This patch makes it always hold the dnode reference between
zap_lockdir() and zap_unlockdir(). It allows to avoid most of dnode
operations between those. It also adds several new _by_dnode() APIs
to ZAP and uses them in BRT code. Also adds dmu_prefetch_by_dnode()
variant and uses it in the ZAP code.
After this there remains only one call to dmu_buf_dnode_enter(),
which seems to be unneeded. So remove the call and the functions.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15951
If there is a pending entry for this block, then we've already
issued BRT prefetch for it within this TXG, so don't do it again.
BRT vdev lookup and following zap_prefetch_uint64() call can be
pretty expensive and should be avoided when not necessary.
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15941
- Remove custom zap_memset(), use regular memset().
- Use PANIC() instead of opaque cmn_err(CE_PANIC).
- Provide entry parameter to zap_leaf_rehash_entry().
- Reduce branching in zap_leaf_array_create() inner loop.
- Remove signedness where it should not be.
Should be no function changes.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15976
It does not look important how exactly brt_pending_tree is sorted.
When cloning large file, it is quite likely that all of its blocks
have identical physical birth times, so comparing them first does
not provide useful entropy, while accesses additional cache line.
In most cases combination of vdev and offset provides unique result
and physical birth time comparison is not even needed. Meanwhile,
when traversing the tree inside brt_pending_apply(), it can be
beneficial for dbuf cache and CPU cache hits to group processing
by vdev and so by the per-VDEV BRT ZAPs.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15954
Before this change resume token was updated only on data receive.
Usually it is enough to resume replication without much overlap.
But we've got a report of a curios case, where replication source
was traversed with recursive grep, which through enabled atime
modified every object without modifying any data. It produced
several gigabytes of replication traffic without a single data
write and so without a single resume point.
While the resume token was not designed to resume from an object,
I've found that the send implementation always sends object before
any data. So by requesting resume from offset 0 we are effectively
resuming from the object, followed (or not) by the data at offset
0, just as we need it.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15927
This changes taskq_thread_should_stop() to limit maximum exit rate
for idle threads to one per 5 seconds. I believe the previous one
was broken, not allowing any thread exits for tasks arriving more
than one at a time and so completing while others are running.
Also while there:
- Remove taskq_thread_spawn() calls on task allocation errors.
- Remove extra taskq_thread_should_stop() call.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15873
- Split dmu_prefetch_dnode() from dmu_prefetch() into a separate
function. It is quite inconvenient to read the code where len = 0
means dnode prefetch instead indirect/data prefetch. One function
doing both has no benefits, since the code paths are independent.
- Improve dmu_prefetch() handling of long block ranges. Instead
of limiting L0 data length to prefetch for to dmu_prefetch_max,
make dmu_prefetch_max limit the actual amount of prefetch at the
specified level, and, if there is more, prefetch all the rest at
higher indirection level. It should improve random access times
within the prefetched range of any length, reducing importance of
specific dmu_prefetch_max value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15076
While picking parts from #14909 I've missed Linux tracing specific
ones, that went unnoticed in default configurations, but breaks the
build in some.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15730
Track history in context of bursts, not individual log blocks. It
allows to not blow away all the history by single large burst of
many block, and same time allows optimizations covering multiple
blocks in a burst and even predicted following burst. For each
burst account its optimal block size and minimal first block size.
Use that statistics from the last 8 bursts to predict first block
size of the next burst.
Remove predefined set of block sizes. Allocate any size we see fit,
multiple of 4KB, as required by ZIL now. With compression enabled
by default, ZFS already writes pretty random block sizes, so this
should not surprise space allocator any more.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15635
- Generalize vdev_nowritecache handling by traversing through the
VDEV tree and skipping children ZIOs where not supported.
- Remove intermediate zio_null() in case of several VDEV children.
- Remove children handling from zio_ioctl(). There are no other
use cases for this code beside DKIOCFLUSHWRITECACHED, and would there
be, I doubt they would so straightforward apply to all VDEV children.
Comparing to removed previous optimization this should improve cases
of redundant ZILs/SLOGs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15515
... by checking that previous block is fully written and flushed.
It allows to skip commit delays since we can give up on aggregation
in that case. This removes zil_min_commit_timeout parameter, since
for single-threaded workloads it is not needed at all, while on very
fast devices even some multi-threaded workloads may get detected as
single-threaded and still bypass the wait. To give multi-threaded
workloads more aggregation chances increase zfs_commit_timeout_pct
from 5 to 10%, as they should suffer less from additional latency.
Also single-threaded workloads detection allows in perspective better
prediction of the next block size.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15381
99741bde5 accesses a cached blk-mq hardware context through the mq_hctx
field of struct request. However, this field did not exist until 5.0.
Before that, the private function blk_mq_map_queue() was used to dig it
out of broader queue context. This commit detects this situation, and
handles it with a poor-man's simulation of that function.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16069
99741bde5 introduced zvol_num_taskqs, but put it behind the HAVE_BLK_MQ
define, preventing builds on versions of Linux that don't have it
(<3.13, incl EL7).
Nothing about it seems dependent on blk-mq, so this just moves it out
from behind that define and so fixes the build.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16062
Currently, zvol uses a single taskq, resulting in throughput bottleneck
under heavy load due to lock contention on the single taskq. This patch
addresses the performance bottleneck under heavy load conditions by
utilizing multiple taskqs, thus mitigating lock contention. The number
of taskqs scale dynamically based on the available CPUs in the system,
as illustrated below:
taskq total
cpus taskqs threads threads
------- ------- ------- -------
1 1 32 32
2 1 32 32
4 1 32 32
8 2 16 32
16 3 11 33
32 5 7 35
64 8 8 64
128 11 12 132
256 16 16 256
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15992
If a linear buffer spans multiple pages, and the first page has a
non-zero starting offset, the checker would not include the offset, and
so would think there was an alignment gap at the end of the first page,
rather than at the start.
That is, for a 16K buffer spread across five pages with an initial 512B
offset:
[.XXXXXXX][XXXXXXXX][XXXXXXXX][XXXXXXXX][XXXXXXX.]
It would be interpreted as:
[XXXXXXX.][XXXXXXXX]...
And be rejected as misaligned.
Since it's already a linear ABD, the "linearising" copy would just reuse
the buffer as-is, and the second check would failing, tripping the
VERIFY in vdev_disk_io_rw().
This commit fixes all this by including the offset in the check for
end-of-page alignment.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit 1bf649cb0a)
After 08fd5ccc3, the discard issuing code was organised such that if
requesting an async discard or secure erase failed before the IO was
issued (that is, calling __blkdev_issue_discard() returned an error),
the failed zio would never be executed, resulting in txg_sync hanging
forever waiting for IO to finish.
This commit fixes that by immediately executing a failed zio on error.
To handle the successful synchronous op case, we fake an async op by,
when not using an asynchronous submission method, queuing the successful
result zio as part of the discard handler.
Since it was hard to understand the differences between discard and
secure erase, and sync and async, across different kernel versions, I've
commented and reorganised the code a bit to try and make everything more
contained and linear.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit ba9f587a77)
After IO is unplugged, it may complete immediately and vbio_completion
be called on interrupt context. That may interrupt or deschedule our
task. If its the last bio, the vbio will be freed. Then, we get
rescheduled, and try to write to freed memory through vbio->.
This patch just removes the the cleanup, and the corresponding assert.
These were leftovers from a previous iteration of vbio_submit() and were
always "belt and suspenders" ops anyway, never strictly required.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc
Reported-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit 917ff75e95)
1) Make mmap flushes synchronous. Linux may skip flushing dirty pages
already in writeback unless data-integrity sync is requested.
2) Change zfs_putpage to use TXG_WAIT. Otherwise dirty pages may be
skipped due to DMU pushing back on TX assign.
3) Add missing mmap flush when doing block cloning.
4) While here, pass errors from putpage to writepage/writepages.
This change fixes corruption edge cases, but unfortunately adds
synchronous ZIL flushes for dirty mmap pages to llseek and bclone
operations. It may be possible to avoid these sync writes later
but would need more tricky refactoring of the writeback code.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#15933Closes#16019
We don't want to change to brand-new code in the middle of a stable
series, but we want it available to test for people running into page
splitting issues.
This commits make zfs_vdev_disk_classic=1 the default, and updates the
documentation to better explain what's going on.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Before 4.5 (specifically, torvalds/linux@ddc58f2), head and tail pages
in a compound page were refcounted separately. This means that using the
head page without taking a reference to it could see it cleaned up later
before we're finished with it. Specifically, bio_add_page() would take a
reference, and drop its reference after the bio completion callback
returns.
If the zio is executed immediately from the completion callback, this is
usually ok, as any data is referenced through the tail page referenced
by the ABD, and so becomes "live" that way. If there's a delay in zio
execution (high load, error injection), then the head page can be freed,
along with any dirty flags or other indicators that the underlying
memory is used. Later, when the zio completes and that memory is
accessed, its either unmapped and an unhandled fault takes down the
entire system, or it is mapped and we end up messing around in someone
else's memory. Both of these are very bad.
The solution on these older kernels is to take a reference to the head
page when we use it, and release it when we're done. There's not really
a sensible way under our current structure to do this; the "best" would
be to keep a list of head page references in the ABD, and release them
when the ABD is freed.
Since this additional overhead is totally unnecessary on 4.5+, where
head and tail pages share refcounts, I've opted to simply not use the
compound head in ABD page iteration there. This is theoretically less
efficient (though cleaning up head page references would add overhead),
but its safe, and we still get the other benefits of not mapping pages
before adding them to a bio and not mis-splitting pages.
There doesn't appear to be an obvious symbol name or config option we
can match on to discover this behaviour in configure (and the mm/page
APIs have changed a lot since then anyway), so I've gone with a simple
version check.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit c6be6ce175)
Simplifies our code a lot, so we don't have to wait for each and
reassemble them.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit 72fd834c47)
This makes the submission method selectable at module load time via the
`zfs_vdev_disk_classic` parameter, allowing this change to be backported
to 2.2 safely, and disabled in favour of the "classic" submission method
if new problems come up.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit df2169d141)
This commit tackles a number of issues in the way BIOs (`struct bio`)
are constructed for submission to the Linux block layer.
The kernel has a hard upper limit on the number of pages/segments that
can be added to a BIO, as well as a separate limit for each device
(related to its queue depth and other scheduling characteristics).
ZFS counts the number of memory pages in the request ABD
(`abd_nr_pages_off()`, and then uses that as the number of segments to
put into the BIO, up to the hard upper limit. If it requires more than
the limit, it will create multiple BIOs.
Leaving aside the fact that page count method is wrong (see below), not
limiting to the device segment max means that the device driver will
need to split the BIO in half. This is alone is not necessarily a
problem, but it interacts with another issue to cause a much larger
problem.
The kernel function to add a segment to a BIO (`bio_add_page()`) takes a
`struct page` pointer, and offset+len within it. `struct page` can
represent a run of contiguous memory pages (known as a "compound page").
In can be of arbitrary length.
The ZFS functions that count ABD pages and load them into the BIO
(`abd_nr_pages_off()`, `bio_map()` and `abd_bio_map_off()`) will never
consider a page to be more than `PAGE_SIZE` (4K), even if the `struct
page` is for multiple pages. In this case, it will load the same `struct
page` into the BIO multiple times, with the offset adjusted each time.
With a sufficiently large ABD, this can easily lead to the BIO being
entirely filled much earlier than it could have been. This is also
further contributes to the problem caused by the incorrect segment limit
calculation, as its much easier to go past the device limit, and so
require a split.
Again, this is not a problem on its own.
The logic for "never submit more than `PAGE_SIZE`" is actually a little
more subtle. It will actually never submit a buffer that crosses a 4K
page boundary.
In practice, this is fine, as most ABDs are scattered, that is a list of
complete 4K pages, and so are loaded in as such.
Linear ABDs are typically allocated from slabs, and for small sizes they
are frequently not aligned to page boundaries. For example, a 12K
allocation can span four pages, eg:
-- 4K -- -- 4K -- -- 4K -- -- 4K --
| | | | |
:## ######## ######## ######: [1K, 4K, 4K, 3K]
Such an allocation would be loaded into a BIO as you see:
[1K, 4K, 4K, 3K]
This tends not to be a problem in practice, because even if the BIO were
filled and needed to be split, each half would still have either a start
or end aligned to the logical block size of the device (assuming 4K at
least).
---
In ideal circumstances, these shortcomings don't cause any particular
problems. Its when they start to interact with other ZFS features that
things get interesting.
Aggregation will create a "gang" ABD, which is simply a list of other
ABDs. Iterating over a gang ABD is just iterating over each ABD within
it in turn.
Because the segments are simply loaded in order, we can end up with
uneven segments either side of the "gap" between the two ABDs. For
example, two 12K ABDs might be aggregated and then loaded as:
[1K, 4K, 4K, 3K, 2K, 4K, 4K, 2K]
Should a split occur, each individual BIO can end up either having an
start or end offset that is not aligned to the logical block size, which
some drivers (eg SCSI) will reject. However, this tends not to happen
because the default aggregation limit usually keeps the BIO small enough
to not require more than one split, and most pages are actually full 4K
pages, so hitting an uneven gap is very rare anyway.
If the pool is under particular memory pressure, then an IO can be
broken down into a "gang block", a 512-byte block composed of a header
and up to three block pointers. Each points to a fragment of the
original write, or in turn, another gang block, breaking the original
data up over and over until space can be found in the pool for each of
them.
Each gang header is a separate 512-byte memory allocation from a slab,
that needs to be written down to disk. When the gang header is added to
the BIO, its a single 512-byte segment.
Pulling all this together, consider a large aggregated write of gang
blocks. This results a BIO containing lots of 512-byte segments. Given
our tendency to overfill the BIO, a split is likely, and most possible
split points will yield a pair of BIOs that are misaligned. Drivers that
care, like the SCSI driver, will reject them.
---
This commit is a substantial refactor and rewrite of much of `vdev_disk`
to sort all this out.
`vdev_bio_max_segs()` now returns the ideal maximum size for the device,
if available. There's also a tuneable `zfs_vdev_disk_max_segs` to
override this, to assist with testing.
We scan the ABD up front to count the number of pages within it, and to
confirm that if we submitted all those pages to one or more BIOs, it
could be split at any point with creating a misaligned BIO. If the
pages in the BIO are not usable (as in any of the above situations), the
ABD is linearised, and then checked again. This is the same technique
used in `vdev_geom` on FreeBSD, adjusted for Linux's variable page size
and allocator quirks.
`vbio_t` is a cleanup and enhancement of the old `dio_request_t`. The
idea is simply that it can hold all the state needed to create, submit
and return multiple BIOs, including all the refcounts, the ABD copy if
it was needed, and so on. Apart from what I hope is a clearer interface,
the major difference is that because we know how many BIOs we'll need up
front, we don't need the old overflow logic that would grow the BIO
array, throw away all the old work and restart. We can get it right from
the start.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit 06a196020e)
This is just setting up for the next couple of commits, which will add a
new IO function and a parameter to select it.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit c4a13ba483)
Light reshuffle to make it a bit more linear to read and get rid of a
bunch of args that aren't needed in all cases.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit 867178ae1d)
This is just renaming the existing functions we're about to replace and
grouping them together to make the next commits easier to follow.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit f3b85d706b)
The regular ABD iterators yield data buffers, so they have to map and
unmap pages into kernel memory. If the caller only wants to count
chunks, or can use page pointers directly, then the map/unmap is just
unnecessary overhead.
This adds adb_iterate_page_func, which yields unmapped struct page
instead.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit 390b448726)
Before 5.4 we have to do a little math.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15533Closes#15588
(cherry picked from commit df04efe321)
Linux 6.8 removes generic_copy_file_range(), which had been reduced to a
simple wrapper around splice_copy_file_range(). Detect that function
directly and use it if generic_ is not available.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15930Closes#15931
(cherry picked from commit ef08a4d406)
When ZFS overwrites a whole block, it does not bother to read the
old content from disk. It is a good optimization, but if the buffer
fill fails due to page fault or something else, the buffer ends up
corrupted, neither keeping old content, nor getting the new one.
On FreeBSD this is additionally complicated by page faults being
blocked by VFS layer, always returning EFAULT on attempt to write
from mmap()'ed but not yet cached address range. Normally it is
not a big problem, since after original failure VFS will retry the
write after reading the required data. The problem becomes worse
in specific case when somebody tries to write into a file its own
mmap()'ed content from the same location. In that situation the
only copy of the data is getting corrupted on the page fault and
the following retries only fixate the status quo. Block cloning
makes this issue easier to reproduce, since it does not read the
old data, unlike traditional file copy, that may work by chance.
This patch provides the fill status to dmu_buf_fill_done(), that
in case of error can destroy the corrupted buffer as if no write
happened. One more complication in case of block cloning is that
if error is possible during fill, dmu_buf_will_fill() must read
the data via fall-back to dmu_buf_will_dirty(). It is required
to allow in case of error restoring the buffer to a state after
the cloning, not not before it, that would happen if we just call
dbuf_undirty().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15665
Skip cross filesystem block cloning tests on FreeBSD if running
less than version 14.0. Cross filesystem copy_file_range() was
added in FreeBSD 14.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15901
Fix a misreport in 'zdb -d' where it falsely marked
BRT objects as leaked.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Yuxin Wang <yuxinwang9999@gmail.com>
Closes#15882
This commit adds the zed_notify_ntfy() function and hooks it
into zed_notify(). This will allow ZED to send notifications
to ntfy.sh or a self-hosted Ntfy service, which can be received
on a desktop or mobile device. It is configured with ZED_NTFY_TOPIC,
ZED_NTFY_URL, and ZED_NTFY_ACCESS_TOKEN variables in zed.rc.
Reviewed-by: @classabbyamp
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dex Wood <slash2314@gmail.com>
Closes#15584
Similar to deduplication, the size of data duplicated by block cloning
should not be included in the slop space calculation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Yuxin Wang <yuxinwang9999@gmail.com>
Closes#15874
Because "filesystem" and "volume" are just too long!
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15864
(cherry picked from commit a5a725440b)
cp_files_002_pos uses BRT, so enable block cloning in setup/cleanup.
This is only something we need to do in zfs-2.2.3, since 2.2.x ships
with block cloning disabled by default.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
CVE-2020-24370 is a security vulnerability in lua. Although the CVE
description in CVE-2020-24370 said that this CVE only affected lua
5.4.0, according to lua this CVE actually existed since lua 5.2. The
root cause of this CVE is the negation overflow that occurs when you
try to take the negative of 0x80000000. Thus, this CVE also exists in
openzfs. Try to backport the fix to the lua in openzfs since the
original fix is for 5.4 and several functions have been changed.
https://github.com/advisories/GHSA-gfr4-c37g-mm3vhttps://nvd.nist.gov/vuln/detail/CVE-2020-24370https://www.lua.org/bugs.html#5.4.0-11https://github.com/lua/lua/commit/a585eae6e7ada1ca9271607a4f48dfb1786
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ChenHao Lu <18302010006@fudan.edu.cn>
Closes#15847
When very large pools are present, it can be laborious to find
reasons for why a pool is degraded and/or where an unhealthy vdev
is. This option filters out vdevs that are ONLINE and with no errors
to make it easier to see where the issues are. Root and parents of
unhealthy vdevs will always be printed.
Testing:
ZFS errors and drive failures for multiple vdevs were simulated with
zinject.
Sample vdev listings with '-e' option
- All vdevs healthy
NAME STATE READ WRITE CKSUM
iron5 ONLINE 0 0 0
- ZFS errors
NAME STATE READ WRITE CKSUM
iron5 ONLINE 0 0 0
raidz2-5 ONLINE 1 0 0
L23 ONLINE 1 0 0
L24 ONLINE 1 0 0
L37 ONLINE 1 0 0
- Vdev faulted
NAME STATE READ WRITE CKSUM
iron5 DEGRADED 0 0 0
raidz2-6 DEGRADED 0 0 0
L67 FAULTED 0 0 0 too many errors
- Vdev faults and data errors
NAME STATE READ WRITE CKSUM
iron5 DEGRADED 0 0 0
raidz2-1 DEGRADED 0 0 0
L2 FAULTED 0 0 0 too many errors
raidz2-5 ONLINE 1 0 0
L23 ONLINE 1 0 0
L24 ONLINE 1 0 0
L37 ONLINE 1 0 0
raidz2-6 DEGRADED 0 0 0
L67 FAULTED 0 0 0 too many errors
- Vdev missing
NAME STATE READ WRITE CKSUM
iron5 DEGRADED 0 0 0
raidz2-6 DEGRADED 0 0 0
L67 UNAVAIL 3 1 0
- Slow devices when -s provided with -e
NAME STATE READ WRITE CKSUM SLOW
iron5 DEGRADED 0 0 0 -
raidz2-5 DEGRADED 0 0 0 -
L10 FAULTED 0 0 0 0 external device fault
L51 ONLINE 0 0 0 14
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Cameron Harr <harr1@llnl.gov>
Closes#15769
Replace ENCLO_US_RE with ENCLO_SU_RE in the name of the variable.
Note this changes the user-visible string in zed.rc, thus might
break current users with the wrong string, but it's ~2 months
since zfs-2.2.0 tag is out, thus should not be widespread yet.
Mechanical change:
$ grep -rl ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT
cmd/zed/zed.d/zed.rc
cmd/zed/zed.d/statechange-slot_off.sh
$ sed -i 's/ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT/<linebreak>
ZED_POWER_OFF_ENCLOSURE_SLOT_ON_FAULT/g' \
cmd/zed/zed.d/zed.rc \
cmd/zed/zed.d/statechange-slot_off.sh
$ grep -rl ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT
$
Fixes 11fbcacf37
("zed: Add zedlet to power off slot when drive is faulted")
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Closes#15651
On Linux, ZFS uses blkdev_issue_discard in vdev_disk_io_trim to issue
trim command which is synchronous.
This commit updates vdev_disk_io_trim to use __blkdev_issue_discard,
which is asynchronous. Unfortunately there isn't any asynchronous
version for blkdev_issue_secure_erase, so performance of secure trim
will still suffer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15843
On Linux the ioctl_ficlonerange() and ioctl_ficlone() system calls
are expected to either fully clone the specified range or return an
error. The range may be for an entire file. While internally ZFS
supports cloning partial ranges there's no way to return the length
cloned to the caller so we need to make this all or nothing.
As part of this change support for the REMAP_FILE_CAN_SHORTEN flag
has been added. When REMAP_FILE_CAN_SHORTEN is set zfs_clone_range()
will return a shortened range when encountering pending dirty records.
When it's clear zfs_clone_range() will block and wait for the records
to be written out allowing the blocks to be cloned.
Furthermore, the file range lock is held over the region being cloned
to prevent it from being modified while cloning. This doesn't quite
provide an atomic semantics since if an error is encountered only a
portion of the range may be cloned. This will be converted to an
error if REMAP_FILE_CAN_SHORTEN was not provided and returned to the
caller. However, the destination file range is left in an undefined
state.
A test case has been added which exercises this functionality by
verifying that `cp --reflink=never|auto|always` works correctly.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15728Closes#15842
- Mark some parameters to zpool_power*() as unused.
- Add a stub zpool_disk_wait().
Fixes: a9520e6e5 ("zpool: Add slot power control, print power status")
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Add `zpool` flags to control the slot power to drives. This assumes
your SAS or NVMe enclosure supports slot power control via sysfs.
The new `--power` flag is added to `zpool offline|online|clear`:
zpool offline --power <pool> <device> Turn off device slot power
zpool online --power <pool> <device> Turn on device slot power
zpool clear --power <pool> [device] Turn on device slot power
If the ZPOOL_AUTO_POWER_ON_SLOT env var is set, then the '--power'
option is automatically implied for `zpool online` and `zpool clear`
and does not need to be passed.
zpool status also gets a --power option to print the slot power status.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mart Frauenlob <AllKind@fastest.cc>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15662
There have been rare cases where the VDEV_ENC_SYSFS_PATH value that zed
gets passed is stale. To mitigate this, dynamically check the sysfs
path at the time of zed event processing, and use the dynamic value if
possible. Note that there will be other times when we can not
dynamically detect the sysfs path (like if a disk disappears) and have
to rely on the old value for things like turning on the fault LED. That
is to say, we can't just blindly use the dynamic path in every case.
Also:
- Add enclosure sysfs entry when running 'zpool add'
- Fix 'slot' and 'enc' zpool.d scripts for nvme
Reviewed-by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15462
Add a test for the dirty dnode SEEK_HOLE/SEEK_DATA bug described in
https://github.com/openzfs/zfs/issues/15526
The bug was fixed in https://github.com/openzfs/zfs/pull/15571 and
was backported to 2.2.2 and 2.1.14. This test case is just to
make sure it does not come back.
seekflood.c originally written by Rob Norris.
Reviewed-by: Graham Perrin <grahamperrin@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15608
struct mnt_idmap no longer has a struct user_namespace within it. Work
around this by creating a temporary with the copy of the map we need
taken from the idmap.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15805
The name inode_permission is now defined in the kernel. Rename ours to
test_permission, in line with most of our other tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15805
MAX_ORDER has been renamed to MAX_PAGE_ORDER. Rather than just
redefining it, instead define our own name and set it consistently from
the start.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15805
Linux has removed strlcpy in favour of strscpy. This implements a
fallback implementation of strlcpy for this case.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15805
blkdev_get_by_path() and blkdev_put() have been replaced by
bdev_open_by_path() and bdev_release(), which return a "handle" object
with the bdev object itself inside.
This adds detection for the new functions, and macros to handle the old
and new forms consistently.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15805
The kernel is now being compiled with -Wmissing-prototypes. Most of our
test stub functions had no prototype, and failed to compile. Since they
don't need to be visible anywhere else, just make them all static.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15805
Update the META file to reflect compatibility with the 6.7 kernel.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15833
During device removal stress tests, we noticed that we were tripping
the assertion that mg_initialized was true. After investigation, it was
determined that the mg in question was the embedded log metaslab
group for a newly added vdev; the normal mg had been initialized (by
metaslab_sync_reassess, via vdev_sync_done). However, because the spa
config alloc lock is not held as writer across both calls to
metaslab_sync_reassess, it is possible for an allocation to happen
between the two metaslab_groups being initialized. Because the metaslab
code doesn't check the group in question, just the vdev's main mg, it
is possible to get past the initial check in vdev_allocatable and
later fail due to the assertion.
We simply remove the assertions. We could also consider locking the
ALLOC lock around the reassess calls in vdev_sync_done, but that risks
deadlocks. We could check the actual target mg in vdev_allocatable,
but that risks racing with a passivation that comes in after that
check but before the assertion. We still won't be able to actually
allocate from the metaslab group if no metaslabs are ready, so this
change shouldn't break anything.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15818
zpool-iostat.8: Updated time(2) -> time(1) to align to manual page
zpool-list.8: Updated time(2) -> time(1) to align to manual page
zpool-status.8: Updated time(2) -> time(1) to align to manual page
zpool-wait.8: Update time(2) -> time(1) to align to manual page
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christopher Davidson <christopher.davidson@gmail.com>
Closes#15823
The zdb_args_pos test may take slightly longer than 600 seconds to run
on some of the CI builders. To prevent this from causing failures allow
up to 1200 seconds for tests in this group.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15826
list, status and iostat all display the -T timestamp before the header,
but wait showed it after. Make it be like the others.
Reported-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15825
If devid or physpath for a vdev changes between imports, ensure it is
updated to the new value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15816
GitHub Actions is transitioning from Node 16 to Node 20.
So we need to update these:
- actions/checkout@v3 -> v4
- actions/download-artifact@v3 -> v4
- actions/upload-artifact@v3 -> v4 and some minor changes
Update also the documentation of the testings workflow.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Andrew Innes <andrew.c12@gmail.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#15820
The LLVM/Clang developers pointed out that using the CPP to detect use
of functions that our QA policies prohibit risks invoking undefined
behavior. To resolve this, we configure CodeQL to detect forbidden
function usage.
Note that cpp in the context of CodeQL refers to C/C++, rather than the
C PreProcessor, which C++ also uses. It really should have been written
cxx, but that ship sailed a long time ago. This misuse of the term cpp
is retained in the CodeQL configuration for consistency with upstream
CodeQL.
As a side benefit, verbose make no longer is a wall of text showing a
bunch of CPP macros, which can make debugging slightly easier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#15819Closes#14134
The Github Action Runner got some new hardware metrics. We should use
the provided and empty disk which is pre-mounted at /mnt now.
Disk1: 89GiB -> rootfs + bootfs with ~80MB/s -> don't care
Disk2: 64GiB -> /mnt with 420MB/s -> new testing ssd
This commit will mount the new disk to /var/tmp and provide hopefully
some speedups within our testings.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Andrew Innes <andrew.c12@gmail.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#15811
musl libc has deprecated LFS64 aliases, so bootstrapping FreeBSD tools
under musl distros has been failing with stat64 errors.
Apply the aliases under non-glibc Linux to fix this problem.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Val Packett <val@packett.cool>
Closes#15780
When building (s)rpm files through the Makefile, a directory structure
is created in /tmp to hold the various files.
In case the user running the command has overridden some of the RPM path
settings through their user profile (for example in `~/.rpmmacros`),
these paths do not line up with the configuration, and the build fails.
Make sure all paths used are properly defined.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ralf Ertzinger <ralf@skytale.net>
Closes#15756
On Linux x86_64, kmem cache can have size up to 4M,
however increasing spl_kmem_cache_slab_limit can lead
to crash due to the size check inconsistency.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#15757
If the AUX vdev is added using UUID, importing the pool falls back AUX
vdev to open it with disk name instead of UUID due to the absence of
path information for AUX vdevs. Since AUX label now have path
information, this PR adds path handling for it in `label_path`.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15737
Pool import logic uses vdev paths, so it makes sense to add path
information on AUX vdev as well.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15737
When spare or l2cache (aux) vdev is added during pool creation,
spa->spa_uberblock is not dumped until that point. Subsequently,
the aux label is never synchronized after its initial creation,
resulting in the uberblock label remaining undumped. The uberblock
is crucial for lib_blkid in identifying the ZFS partition type. To
address this issue, we now ensure sync of the uberblock label once
if it's not dumped initially.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15737
Drop the no_memory() call from zpool_in_use() when reading the
label fails and instead return the error to the caller. This
prevents a misleading "internal error: out of memory" error
when the label can't be read. This will result in is_spare()
returning B_FALSE instead of aborting, which is already safely
handled.
Furthermore, on Linux it's possible for EREMOTEIO to returned
by an NVMe device if the device has been low-level formatted
and not rescanned. In this case we want to fallback to the
legacy scanning method and read any of the labels we can.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #13538Closes#15747
This change provides rpm spec macros to sign the zfs and spl kmods as
the final step after the %install scriptlet. This is needed since the
find-debuginfo.sh script strips out debug symbols plus signatures.
Kernel module signing only occurs when the required files are present
as typically required in the Linux source tree:
- certs/signing_key.pem
- certs/signing_key.x509
The method for overriding the default __spec_install_post macro is
inspired by (and largely copied from) the Fedora kernel.spec.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Benjamin Sherman <benjamin@holyarmy.org>
Closes#15744
When running zfs share -a resetting the exports.d/zfs.exports makes
sense the get a clean state.
Truncating was also called with zfs mount which would not populate the
file again.
Add test to verify shares persist after mount -a.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Stefan Lendl <s.lendl@proxmox.com>
Closes#15607Closes#15660
In general, VOPs must not load the "z_log" field until having called
zfs_enter_verify_zp().
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#15752
We need to wait until after having done a zfs_enter() to load some
fields from the zfsvfs structure. Otherwise a use-after-free is
possible in the face of a concurrent rollback.
Other functions in this file are careful to avoid this bug, I believe
this is the only instance.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#15752
zdb -R with :d tries to use gzip decompression 9 times per size.
There's absolutely no reason for that, they're all the same
decompressor.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#15726
Profiling zdb -vvvvv on datasets with a lot of zstd blocks, we find
ourselves spending quite a lot of time on malloc/free, because we
allocate a 16M abd each call, and never free it, so we're leaking
16M per call as well.
This seems sub-optimal. So let's just keep the buffer around and
reuse it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#15721
Descriptor leak can be easily reproduced by doing:
# zpool import tank
# sysctl kern.openfiles
# zpool export tank; zpool import tank
# sysctl kern.openfiles
We were leaking four file descriptors on every import.
Similar leak most likely existed when using file-based VDEVs.
External-issue: https://reviews.freebsd.org/D43529
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#15630
If block cloning is disabled by default then enable it when running
the bclone tests. Follow up to #15529.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15796
Compiling on arm64 freebsd-13.2 and arm64 almalinux-8 brings currently
this error:
```
CC tests/zfs-tests/cmd/clonefile.o
tests/zfs-tests/cmd/clonefile.c:166:43: error: result of comparison of \
constant -1 with expression of type 'char' is always true \
[-Werror,-Wtautological-constant-out-of-range-compare]
while ((c = getopt(argc, argv, "crfdq")) != -1) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~
1 error generated.
gmake[2]: *** [Makefile:8675: tests/zfs-tests/cmd/clonefile.o] Error 1
```
Fix: use correct variable type `int`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#15783
If the destination file is mmaped and the mmaped region was already
read, so it is cached, we need to update mmaped pages after successful
clone using update_pages().
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Pointed out by: Ka Ho Ng <khng@freebsd.org>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#15772
For block cloning, if we mmap the cloned file and write from the
map into the file, it triggers a panic in dbuf_redirty() on Linux.
The same scenario causes data corruption on FreeBSD. Both these
issues are fixed under PR#15656 and PR#15665.
It would be good to add a test for this scenario in ZTS. The test
program and issue was produced by @robn.
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15717
The test mostly focus on testing various corner cases.
The tests take a long time to run, so for the common.run runfile
we randomly select a hundred tests.
To run all the bclone tests, bclone.run runfile should be used.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#15631
PR#15634 removes 128K into 2x68K LWB split optimization, since it
was found to cause LWB buffer overflow while trying to write 128KB
TX_CLONE_RANGE record with 1022 block pointers into 68KB buffer,
with multiple VDEVs ZIL.
This commit adds a test for this particular scenario by writing
maximum sizes TX_CLONE_RANE record with 1022 block pointers into
68KB buffer, with two SLOG devices.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15672
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15614
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15614
Switch from cv_wait() to cv_wait_idle() in vdev_autotrim_wait_kick(),
which should mitigate the high load average while waiting.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: jxdking <lostking2008@hotmail.com>
Closes#15781
In db4fc559c I messed up and changed this bit of code to set the inode
atime to an uninitialised value, when actually it was just supposed to
loading the atime from the inode to be stored in the SA. This changes it
to what it should have been.
Ensure times change by the right amount Previously, we only checked
if the times changed at all, which missed a bug where the atime was
being set to an undefined value.
Now ensure the times change by two seconds (or thereabouts), ensuring
we catch cases where we set the time to something bonkers
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15762Closes#15773
Since Linux 6.2, the implementation of flush_dcache_page on riscv
references GPL-only symbol `PageHuge`, breaking the build of zfs.
This patch uses existing mechanism to override flush_dcache_page,
removing the call to `PageHuge`. According to comments in kernel,
it is only used to do some check against HugeTLB pages, which only
exist in userspace. ZFS uses flush_dcache_page only on kernel pages,
thus this patch will not introduce any behaviour change.
See also: torvalds/linux@d33deda, openzfs/zfs@589f59b
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#14974Closes#15627
For FreeBSD sysctls, we don't want the extra newline, since the
sysctl(8) utility will format strings appropriately.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reported-by: Peter Holm <pho@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#15719
sbuf_cpy() resets the sbuf state, which is wrong for sbufs allocated by
sbuf_new_for_sysctl(). In particular, this code triggers an assertion
failure in sbuf_clear().
Simplify by just using sysctl_handle_string() for both reading and
setting the tunable.
Fixes: 6930ecbb7 ("spa: make read/write queues configurable")
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reported-by: Peter Holm <pho@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#15719
Two block pointers in livelist pointing to the same location may
be caused not only by dedup, but also by block cloning. We should
not assert D bit set in them.
Two block pointers in livelist pointing to the same location may
have different logical birth time in case of dedup or cloning. We
should assert identical physical birth time instead.
Assert identical physical block size between pointers in addition
to checksum, since that is what checksums are calculated on.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15732
- Fail if source block is smaller than destination. We can only
grow blocks, not shrink them.
- Fail if we do not have full znode range lock. In that case grow
is not even called. We should improve zfs_rangelock_cb() somehow
to know when cloning needs to grow the block size unlike write.
- Fail of we tried to resize, but failed. There are many reasons
for it to fail that we can not predict at this level, so be ready
for them. Unlike write, that may proceed after growth failure,
block cloning can't and must return error.
This fixes assertion inside dmu_brt_clone() when it sees different
number of blocks held in destination than it got block pointers.
Builds without ZFS_DEBUG returned EXDEV, so are not affected much.
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15724Closes#15735
This patch adds check for `kernel_neon_*` symbols on arm and arm64
platforms to address the following issues:
1. Linux 6.2+ on arm64 has exported them with `EXPORT_SYMBOL_GPL`, so
license compatibility must be checked before use.
2. On both arm and arm64, the definitions of these symbols are guarded
by `CONFIG_KERNEL_MODE_NEON`, but their declarations are still
present. Checking in configuration phase only leads to MODPOST
errors (undefined references).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#15711Closes#14555Closes: #15401
While 763ca47 closes the situation of block cloning creating
unencrypted records in encrypted datasets, existing data still causes
panic on read. Setting zfs_recover bypasses this but at the cost of
potentially ignoring more serious issues.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Peredun <chris.peredun@ixsystems.com>
Closes#15677
Block cloning normally creates dirty record without dr_data. But if
the block is read after cloning, it is moved into DB_CACHED state and
receives the data buffer. If after that we call dbuf_unoverride()
to convert the dirty record into normal write, we should give it the
data buffer from dbuf and release one.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15654Closes#15656
In some cases dbuf_assign_arcbuf() may be called on a block that
was recently cloned. If it happened in current TXG we must undo
the block cloning first, since the only one dirty record per TXG
can't and shouldn't mean both cloning and overwrite same time.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15653
dmu_assign_arcbuf_by_dnode() should drop dn_struct_rwlock lock in
case dbuf_hold() failed. I don't have reproduction for this, but
it looks inconsistent with dmu_buf_hold_noread_by_dnode() and co.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15644
Without this patch on pool of 60 vdevs with ZFS_DEBUG enabled clone
takes much more time than copy, while heavily trashing dbgmsg for
no good reason, repeatedly dumping all vdevs BRTs again and again,
even unmodified ones.
I am generally not sure this dumping is not excessive, but decided
to keep it for now, just restricting its scope to more reasonable.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15625
To improve 128KB block write performance in case of multiple VDEVs
ZIL used to spit those writes into two 64KB ones. Unfortunately it
was found to cause LWB buffer overflow, trying to write maximum-
sizes 128KB TX_CLONE_RANGE record with 1022 block pointers into
68KB buffer, since unlike TX_WRITE ZIL code can't split it.
This is a minimally-invasive temporary block cloning fix until the
following more invasive prediction code refactoring.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15634
Block pointers are not encrypted in TX_WRITE and TX_CLONE_RANGE
records, so we can dump them, that may be useful for debugging.
Related to #15543.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15629
When two datasets share the same master encryption key, it is safe
to clone encrypted blocks. Currently only snapshots and clones
of a dataset share with it the same encryption key.
Added a test for:
- Clone from encrypted sibling to encrypted sibling with
non encrypted parent
- Clone from encrypted parent to inherited encrypted child
- Clone from child to sibling with encrypted parent
- Clone from snapshot to the original datasets
- Clone from foreign snapshot to a foreign dataset
- Cloning from non-encrypted to encrypted datasets
- Cloning from encrypted to non-encrypted datasets
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes#15544
ZIL claim can not handle block pointers cloned from the future,
since they are not yet allocated at that point. It may happen
either if the block was just written when it was cloned, or if
the pool was frozen or somehow else rewound on import.
Handle it from two sides: prevent cloning of blocks with physical
birth time from not yet synced or frozen TXG, and abort ZIL claim
if we still detect such blocks due to rewind or something else.
While there, assert that any cloned blocks we claim are really
allocated by calling metaslab_check_free().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15617
zil_claim_clone_range() takes references on cloned blocks before ZIL
replay. Later zil_free_clone_range() drops them after replay or on
dataset destroy. The total balance is neutral. It means we do not
need to do anything (drop the references) for not implemented yet
TX_CLONE_RANGE replay for ZVOLs.
This is a logical follow up to #15603.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15612
Since we use a limited set of kmem caches, quite often we have unused
memory after the end of the buffer. Put there up to a 512-byte canary
when built with debug to detect buffer overflows at the free time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15553
This should make sure we have log written without overflows.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15517
PR #15457 exposed weird logic in L2ARC write sizing. If it appeared
bigger than device size, instead of liming write it reset all the
system-wide tunables to their default. Aside of being excessive,
it did not actually help with the problem, still allowing infinite
loop to happen.
This patch removes the tunables reverting logic, but instead limits
L2ARC writes (or at least eviction/trim) to 1/4 of the capacity.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15519
It is unused for 3 years since #10576.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15507
- Use sbuf_new_for_sysctl() to reduce double-buffering on sysctl
output.
- Use much faster sbuf_cat() instead of sbuf_printf("%s").
Together it reduces `sysctl kstat.zfs.misc.dbufs` time from minutes
to seconds, making dbufstat almost usable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15495
Add a dataset_kstats_rename function, and call it when renaming
a zvol on FreeBSD and Linux.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes#15482Closes#15486
Once we verified the ABDs and asserted the sizes we should never
see premature ABDs ends. Assert that and remove extra branches
from production builds.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15428
We are finding that as customers get larger and faster machines
(hundreds of cores, large NVMe-backed pools) they keep hitting
relatively low performance ceilings. Our profiling work almost always
finds that they're running into bottlenecks on the SPA IO taskqs.
Unfortunately there's often little we can advise at that point, because
there's very few ways to change behaviour without patching.
This commit adds two load-time parameters `zio_taskq_read` and
`zio_taskq_write` that can configure the READ and WRITE IO taskqs
directly.
This achieves two goals: it gives operators (and those that support
them) a way to tune things without requiring a custom build of OpenZFS,
which is often not possible, and it lets us easily try different config
variations in a variety of environments to inform the development of
better defaults for these kind of systems.
Because tuning the IO taskqs really requires a fairly deep understanding
of how IO in ZFS works, and generally isn't needed without a pretty
serious workload and an ability to identify bottlenecks, only minimal
documentation is provided. Its expected that anyone using this is going
to have the source code there as well.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
On some systems we already have blkdev_get_by_path() with 4 args
but still the old FMODE_EXCL and not BLK_OPEN_EXCL defined.
The vdev_bdev_mode() function was added to handle this case
but there was no generic way to specify exclusive access.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15692
The io_uring test fails on CentOS 9 with the following fio error.
Disable the test for the benefit of the CI until this can be fully
investigated. This basic test passes as expected on newer kernels.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15636
6.7 changes the shrinker API such that shrinkers must be allocated
dynamically by the kernel. To accomodate this, this commit reworks
spl_register_shrinker() to do something similar against earlier kernels.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://github.com/sponsors/robn
In 6.7 the superblock shrinker member s_shrink has changed from being an
embedded struct to a pointer. Detect this, and don't take a reference if
it already is one.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://github.com/sponsors/robn
6.6 made i_ctime inaccessible; 6.7 has done the same for i_atime and
i_mtime. This extends the method used for ctime in b37f29341 to atime
and mtime as well.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://github.com/sponsors/robn
6.7 changed the names of the time members in struct inode, so we can't
assign back to it because we don't know its name. In practice this
doesn't matter though - if we're missing current_time(), then we must be
on <4.9, and we know our fallback will need to return timespec.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://github.com/sponsors/robn
Call vfs_exjail_clone() for mounts created under .zfs/snapshot
to fill in the mnt_exjail field for the mount. If this is not
done, the snapshots under .zfs/snapshot with not be accessible
over NFS.
This version has the argument name in vfs.h fixed to match that
of the name in spl_vfs.c, although it really does not matter.
External-issue: https://reviews.freebsd.org/D42672
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#15563
zil_claim_clone_range() takes references on cloned blocks before ZIL
replay. Later zil_free_clone_range() drops them after replay or on
dataset destroy. The total balance is neutral. It means on actual
replay we must take additional references, which would stay in BRT.
Without this blocks could be freed prematurely when either original
file or its clone are destroyed. I've observed BRT being emptied
and the feature being deactivated after ZIL replay completion, which
should not have happened. With the patch I see expected stats.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15603
Bug introduced in 213d682967.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Warner Losh <imp@FreeBSD.org>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#15606
With Linux v6.6.x and clang 16, a configure step fails on a warning that
later results in an error while building, due to 'ts' being
uninitialized. Add a trivial initialization to silence the warning.
Signed-off-by: Jaron Kent-Dobias <jaron@kent-dobias.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
If all zfs dkms modules have been removed, a shell-init error message
may appear, because /var/lib/dkms/zfs does no longer exist.
Resolve this by leaving the directory earlier on.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mart Frauenlob <AllKind@fastest.cc>
Closes#15576
It was broken for several reasons:
* VOP_UNLOCK lost an argument in 13.0. So OpenZFS should be using
VOP_UNLOCK1, but a few direct calls to VOP_UNLOCK snuck in.
* The location of the zlib header moved in 13.0 and 12.1. We can drop
support for building on 12.0, which is EoL.
* knlist_init lost an argument in 13.0. OpenZFS change 9d0887402b
assumed 13.0 or later.
* FreeBSD 13.0 added copy_file_range, and OpenZFS change 67a1b03791
assumed 13.0 or later.
Sponsored-by: Axcient
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#15551
Previously, dmu_buf_will_clone() would roll back any dirty record, but
would not clean out the modified data nor reset the state before
releasing the lock. That leaves the last-written data in db_data, but
the dbuf in the wrong state.
This is eventually corrected when the dbuf state is made NOFILL, and
dbuf_noread() called (which clears out the old data), but at this point
its too late, because the lock was already dropped with that invalid
state.
Any caller acquiring the lock before the call into
dmu_buf_will_not_fill() can find what appears to be a clean, readable
buffer, and would take the wrong state from it: it should be getting the
data from the cloned block, not from earlier (unwritten) dirty data.
Even after the state was switched to NOFILL, the old data was still not
cleaned out until dbuf_noread(), which is another gap for a caller to
take the lock and read the wrong data.
This commit fixes all this by properly cleaning up the previous state
and then setting the new state before dropping the lock. The
DBUF_VERIFY() calls confirm that the dbuf is in a valid state when the
lock is down.
Sponsored-by: Klara, Inc.
Sponsored-By: OpenDrives Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15566Closes#15526
zdb with '-e' or exported zpool doesn't work along with
'-O' and '-r' options as we process them before '-e' has
been processed.
Below errors are seen:
~> zdb -e pool-mds65/mdt65 -O oi.9/0x200000009:0x0:0x0
failed to hold dataset 'pool-mds65/mdt65': No such file or directory
~> zdb -e pool-oss0/ost0 -r file1 /tmp/filecopy1 -p.
failed to hold dataset 'pool-oss0/ost0': No such file or directory
zdb: internal error: No such file or directory
We need to make sure to process '-O|-r' options after the
'-e' option has been processed, which imports the pool to
the namespace if it's not in the cachefile.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#15532
Same idea as the dedup stats, but for block cloning.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15541
So that zdb (and others!) can get at the BRT on-disk structures.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15541
The zfs_load-key tests were failing on F39 due to their use of the
deprecated ssl.wrap_socket function. This commit updates the test to
instead use ssl.SSLContext() as described in
https://stackoverflow.com/a/65194957.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15534Closes#15550
In case of crash cloned blocks need to be claimed on pool import.
It is only possible if they (lr_bps) and their count (lr_nbps) are
not encrypted but only authenticated, similar to block pointer in
lr_write_t. Few other fields can be and are still encrypted.
This should fix panic on ZIL claim after crash when block cloning
is actively used.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tom Caputi <caputit1@tcnj.edu>
Reviewed-by: Sean Eric Fagan <sef@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Edmund Nadolski <edmund.nadolski@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15543Closes#15513
Over its history this the dirty dnode test has been changed between
checking for a dnodes being on `os_dirty_dnodes` (`dn_dirty_link`) and
`dn_dirty_record`.
de198f2d9 Fix lseek(SEEK_DATA/SEEK_HOLE) mmap consistency
2531ce372 Revert "Report holes when there are only metadata changes"
ec4f9b8f3 Report holes when there are only metadata changes
454365bba Fix dirty check in dmu_offset_next()
66aca2473 SEEK_HOLE should not block on txg_wait_synced()
Also illumos/illumos-gate@c543ec060dillumos/illumos-gate@2bcf0248e9
It turns out both are actually required.
In the case of appending data to a newly created file, the dnode proper
is dirtied (at least to change the blocksize) and dirty records are
added. Thus, a single logical operation is represented by separate
dirty indicators, and must not be separated.
The incorrect dirty check becomes a problem when the first block of a
file is being appended to while another process is calling lseek to skip
holes. There is a small window where the dnode part is undirtied while
there are still dirty records. In this case, `lseek(fd, 0, SEEK_DATA)`
would not know that the file is dirty, and would go to
`dnode_next_offset()`. Since the object has no data blocks yet, it
returns `ESRCH`, indicating no data found, which results in `ENXIO`
being returned to `lseek()`'s caller.
Since coreutils 9.2, `cp` performs sparse copies by default, that is, it
uses `SEEK_DATA` and `SEEK_HOLE` against the source file and attempts to
replicate the holes in the target. When it hits the bug, its initial
search for data fails, and it goes on to call `fallocate()` to create a
hole over the entire destination file.
This has come up more recently as users upgrade their systems, getting
OpenZFS 2.2 as well as a newer coreutils. However, this problem has been
reproduced against 2.1, as well as on FreeBSD 13 and 14.
This change simply updates the dirty check to check both types of dirty.
If there's anything dirty at all, we immediately go to the "wait for
sync" stage, It doesn't really matter after that; both changes are on
disk, so the dirty fields should be correct.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15571Closes#15526
This reverts commit bd7a02c251 which
can trigger an unlikely existing bio alignment issue on Linux.
This change is good, but the underlying issue it exposes needs to
be resolved before this can be re-applied.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #15533
Many tests are failing on AlmaLinux 9 because ZTS could not destroy the
pool in cleanup. This was due to $PWD being set to '.' instead of the
expected full path. This patch sets $PWD to the full path.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Copy the disable parameter that FreeBSD implemented, and extend it to
work on Linux as well, until we're sure this is stable.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#15529
Auto-generate changelog based off on @VERSION@ during configure,
so that it is not needed to be update with new releases / version
updates.
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update the META file to reflect compatibility with the 6.6 kernel.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15520
This gets around UBSAN errors when using arrays at the end of
structs. It converts some zero-length arrays to variable length
arrays and disables UBSAN checking on certain modules.
It is based off of the patch from #15460.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Co-authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #15145Closes#15510
zpool_create_features_007_pos only tested for compat-2020 feature
set. It would be useful to test for all known features sets. If
any additional feature is found enabled that is not present in
compatibility list or feature set, it should be caught and
reported earlier.
This commit also removes encryption from openzfsonosx-1.8.1
compatibility list. Encryption enables bookmark_v2, since it is
a dependency of encryption, but not listed in openzfsonoxx-1.8.1
compatibility list.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15505
This commit updates zpool-features.7 man page to add newly added
zpool features to grub2 compatibility list.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15505
As shown in #15404#issuecomment-1765002181, Ubuntu kernel has
'Provides: zfs-dkms', which will cause uninstall of the kernel, when
attempting to install openzfs-zfs-dkms.
As a workaround remove the 'Conflicts: zfs-dkms' definition from
the debian control file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mart Frauenlob <AllKind@fastest.cc>
Closes#15503
Private read/write mapping can't be used to modify the mapped files, so
they will remain be immutable. Private read/write mappings are usually
used to load the data segment of executable files, rejecting them will
rendering immutable executable files to stop working.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: WHR <msl0000023508@gmail.com>
Closes#15344
Currently vdev_queue_class_length is responsible for checking how long
the queue length is, however, it doesn't check the length when a list
is used, rather it just returns whether it is empty or not. To fix this
I added a counter variable to vdev_queue_class to keep track of the sync
IO ops, and changed vdev_queue_class_length to reference this variable
instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: MigeljanImeri <ImeriMigel@gmail.com>
Closes#15478
With Linux v6.6.0 and GCC 12, when debug build is configured,
implicit conversion error is raised while converting
'enum <anonymous>' to 'boolean_t'. Use 'B_TRUE' instead of
'true' to fix the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15489
PR#15459 add all read-only compatible zpool features to grub2
compatibility list. 'obsolete_counts' is a read-only features that
depends on 'device_removal' feature which is not read-only and
is marked as ZFEATURE_FLAG_MOS. Creating a pool with grub2
compatibility enables 'device_removal' feature as well, which is
not desired.
This commit removes the 'obsolete_counts' feature from
grub2 compatibility list, as GRUB only supports read-only
compatible features.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15499
Alien does not honour the %posttrans hook.
So move the dkms uninstall/install scripts to the
%pre/%post hooks in case of package install/upgrade.
In case of package removal, handle that in %preun.
Add removal of all old dkms modules.
Add checking for broken 'dkms status'. Handle that as
good as possible and warn the user about it.
Also add more verbose messages about what we are doing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mart Frauenlob <AllKind@fastest.cc>
Closes#15415
GRUB opens the boot pool in read-only mode. All read-only
compatible features for zpool can be enabled and added to
grub2 compatibility, as GRUB does not open the boot-pool
for write.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15459
There is no sense to have separate implementations for FreeBSD and
Linux. Make Linux code shared as more functional and just register
FreeBSD-specific prune callback with arc_add_prune_callback() API.
Aside of code cleanup this should fix excessive pruning on FreeBSD:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=274698
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15456
We should not always use PAGESIZE alignment for caches bigger than
it and SPA_MINBLOCKSIZE otherwise. Doing that caches for 5, 6, 7,
10 and 14KB rounded up to 8, 12 and 16KB respectively make no sense.
Instead specify as alignment the biggest power-of-2 divisor. This
way 2KB and 6KB caches are both aligned to 2KB, while 4KB and 8KB
are aligned to 4KB.
Reduce number of caches to half-power of 2 instead of quarter-power
of 2. This removes caches difficult for underlying allocators to
fit into page-granular slabs, such as: 2.5, 3.5, 5, 7, 10KB, etc.
Since these caches are mostly used for transient allocations like
ZIOs and small DBUF cache it does not worth being too aggressive.
Due to the above alignment issue some of those caches were not
working properly any way. 6KB cache now finally has a chance to
work right, placing 2 buffers into 3 pages, that makes sense.
Remove explicit alignment in Linux user-space case. I don't think
it should be needed any more with the above fixes.
As result on FreeBSD instead of such numbers of pages per slab:
vm.uma.zio_buf_comb_16384.keg.ppera: 4
vm.uma.zio_buf_comb_14336.keg.ppera: 4
vm.uma.zio_buf_comb_12288.keg.ppera: 3
vm.uma.zio_buf_comb_10240.keg.ppera: 3
vm.uma.zio_buf_comb_8192.keg.ppera: 2
vm.uma.zio_buf_comb_7168.keg.ppera: 2
vm.uma.zio_buf_comb_6144.keg.ppera: 2 <= Broken
vm.uma.zio_buf_comb_5120.keg.ppera: 2
vm.uma.zio_buf_comb_4096.keg.ppera: 1
vm.uma.zio_buf_comb_3584.keg.ppera: 7 <= Hard to free
vm.uma.zio_buf_comb_3072.keg.ppera: 3
vm.uma.zio_buf_comb_2560.keg.ppera: 2
vm.uma.zio_buf_comb_2048.keg.ppera: 1
vm.uma.zio_buf_comb_1536.keg.ppera: 2
vm.uma.zio_buf_comb_1024.keg.ppera: 1
vm.uma.zio_buf_comb_512.keg.ppera: 1
I am now getting such:
vm.uma.zio_buf_comb_16384.keg.ppera: 4
vm.uma.zio_buf_comb_12288.keg.ppera: 3
vm.uma.zio_buf_comb_8192.keg.ppera: 2
vm.uma.zio_buf_comb_6144.keg.ppera: 3 <= Fixed, 2 in 3 pages
vm.uma.zio_buf_comb_4096.keg.ppera: 1
vm.uma.zio_buf_comb_3072.keg.ppera: 3
vm.uma.zio_buf_comb_2048.keg.ppera: 1
vm.uma.zio_buf_comb_1536.keg.ppera: 2
vm.uma.zio_buf_comb_1024.keg.ppera: 1
vm.uma.zio_buf_comb_512.keg.ppera: 1
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15452
dmu_tx_check_ioerr() pre-reads blocks that are going to be dirtied
as part of transaction to both prefetch them and check for errors.
But it makes no sense to do it for holes, since there are no disk
reads to prefetch and there can be no errors. On the other side
those blocks are anonymous, and they are freed immediately by the
dbuf_rele() without even being put into dbuf cache, so we just
burn CPU time on decompression and overheads and get absolutely
no result at the end.
Use of dbuf_hold_impl() with fail_sparse parameter allows to skip
the extra work, and on my tests with sequential 8KB writes to empty
ZVOL with 32KB blocks shows throughput increase from 1.7 to 2GB/s.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15371
In Linux commit 560e20e4bf6484a0c12f9f3c7a1aa55056948e1e, the
fsync_bdev() function was removed in favor of sync_blockdev() to do
(roughly) the same thing, given the same input. This change
conditionally attempts to call sync_blockdev() if fsync_bdev() isn't
discovered during configure.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15263
In commit 0d72b92883c651a11059d93335f33d65c6eb653b, a new u32 argument
for the request_mask was added to generic_fillattr. This is the same
request_mask for statx that's present in the most recent API implemented
by zpl_getattr_impl. This commit conditionally adds it to the
zpl_generic_fillattr(...) macro, as well as the zfs_getattr_fast(...)
implementation, when configure determines it's present in the kernel's
generic_fillattr(...).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15263
In Linux commit 13bc24457850583a2e7203ded05b7209ab4bc5ef, direct access
to the i_ctime member of struct inode was removed. The new approach is
to use accessor methods that exclusively handle passing the timestamp
around by value. This change adds new tests for each of these functions
and introduces zpl_* equivalents in include/os/linux/zfs/sys/zpl.h. In
where the inode_get/set_ctime*() functions exist, these zpl_* calls will
be mapped to the new functions. On older kernels, these macros just wrap
direct-access calls. The code that operated on an address of ip->i_ctime
to call ZFS_TIME_DECODE() now will take a local copy using
zpl_inode_get_ctime(), and then pass the address of the local copy when
performing the ZFS_TIME_DECODE() call, in all cases, rather than
directly accessing the member.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15263Closes#15257
Prefetched buffers are currently read from L2ARC if, and only if,
l2arc_noprefetch is set to non-default value of 0. This means that
a streaming read which can be served from L2ARC will instead engage
the main pool.
For example, consider what happens when a file is sequentially read:
- application requests contiguous data, engaging the prefetcher;
- ARC buffers are initially marked as prefetched but, as the calling
application consumes data, the prefetch tag is cleared;
- these "normal" buffers become eligible for L2ARC and are copied to it;
- re-reading the same file will *not* engage L2ARC even if it contains
the required buffers;
- main pool has to suffer another sequential read load, which (due to
most NCQ-enabled HDDs preferring sequential loads) can dramatically
increase latency for uncached random reads.
In other words, current behavior is to write data to L2ARC (wearing it)
without using the very same cache when reading back the same data. This
was probably useful many years ago to preserve L2ARC read bandwidth but,
with current SSD speed/size/price, it is vastly sub-optimal.
Setting l2arc_noprefetch=1, while enabling L2ARC to serve these reads,
means that even prefetched but unused buffers will be copied into L2ARC,
further increasing wear and load for potentially not-useful data.
This patch enable prefetched buffer to be read from L2ARC even when
l2arc_noprefetch=1 (default), increasing sequential read speed and
reducing load on the main pool without polluting L2ARC with not-useful
(ie: unused) prefetched data. Moreover, it clear users confusion about
L2ARC size increasing but not serving any IO when doing sequential
reads.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#15451
Many long-running ZFS ioctls lock the spa_namespace_lock, forcing
concurrent ioctls to sleep for the mutex. Previously, the only
option is to call mutex_enter() which sleeps uninterruptibly. This
is a usability issue for sysadmins, for example, if the admin runs
`zpool status` while a slow `zpool import` is ongoing, the admin's
shell will be locked in uninterruptible sleep for a long time.
This patch resolves this admin usability issue by introducing
mutex_enter_interruptible() which sleeps interruptibly while waiting
to acquire a lock. It is implemented for both Linux and FreeBSD.
The ZFS_IOC_POOL_CONFIGS ioctl, used by `zpool status`, is changed to
use this new macro so that the command can be interrupted if it is
issued during a concurrent `zpool import` (or other long-running
operation).
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Thomas Bertschinger <bertschinger@lanl.gov>
Closes#15360
This reverts commit aefb6a2bd6.
aefb6a2bd temporally disabled blk-mq until we could fix a fix for
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15439
This fix removes a dubious optimization in zfs_uiomove_bvec_rq()
that saved the iterator contents of a rq_for_each_segment(). This
optimization allowed restoring the "saved state" from a previous
rq_for_each_segment() call on the same uio so that you wouldn't
need to iterate though each bvec on every zfs_uiomove_bvec_rq() call.
However, if the kernel is manipulating the requests/bios/bvecs under
the covers between zfs_uiomove_bvec_rq() calls, then it could result
in corruption from using the "saved state". This optimization
results in an unbootable system after installing an OS on a zvol
with blk-mq enabled.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15351
The first occurrence should be "ARC prefetch data accesses:"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: ofthesun9 <olivier@ofthesun.net>
Closes#15427
In my understanding ARC_BUF_SHARED() and arc_buf_is_shared() should
return identical results, except the second also asserts it deeper.
The first is much cheaper though, saving few pointer dereferences.
Replace production arc_buf_is_shared() calls with ARC_BUF_SHARED(),
and call arc_buf_is_shared() in random assertions, while making it
even more strict.
On my tests this in half reduces arc_buf_destroy_impl() time, that
noticeably reduces hash_lock congestion under heavy dbuf eviction.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15397
Torn reads/writes of dp_dirty_total are unlikely: on 64-bit systems
due to register size, while on 32-bit due to memory constraints.
And even if we hit some race, the code implementing the delay takes
the lock any way.
Removal of the poll-wide lock acquisition saves ~1% of CPU time on
8-thread 8KB write workload.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15390
Once we trigger the zpool scrub, all zpool/zfs command gets stuck for
180 seconds. Post 180 seconds zpool/zfs commands gets start executing
however few more seconds(10s) it take to update the status. hence
sleeping for 200 seconds so that we get the correct status.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: vaibhav.bhanawat <vaibhav.bhanawat@delphix.com>
Closes#15364
We already use ____cacheline_aligned in many places, so add one more
instead of seems arbitrary char tc_pad[8].
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15402
Reviewed-by: Rob N <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dennis R. Friedrichsen <dennis.r.friedrichsen@gmail.com>
Closes#15417
Variable 'uma_align_cache' has not been used since commit "FreeBSD: Use
a hash table for taskqid lookups" (3933305ea). Moreover, it is soon
going to become private to FreeBSD's UMA in 15.0-CURRENT (main),
14.0-STABLE (stable/14) and 13.2-STABLE (stable/13). Should accessing
this information become necessary again, one will have to use the new
accessors for recent versions.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olivier Certner <olce.freebsd@certner.fr>
Closes#15416
When a vdev is to be expanded -- either via `zpool online -e` or via
the autoexpand option -- a SPA_ASYNC_CONFIG_UPDATE request is queued
to be handled via an asynchronous worker thread (spa_async_thread).
This normally happens almost immediately; but will be delayed up to
zfs_ccw_retry_interval seconds (default 5 minutes) if an attempt to
write the zpool configuration cache failed.
When FreeBSD boots ZFS-root VM images generated using `makefs -t zfs`,
the zpoolupgrade rc.d script runs `zpool upgrade`, which modifies the
pool configuration and triggers an attempt to write to the cache file.
This attempted write fails because the filesystem is still mounted
read-only at this point in the boot process, triggering a 5-minute
cooldown before SPA_ASYNC_CONFIG_UPDATE requests will be handled by
the asynchronous worker thread.
When expanding a vdev, reset the "when did a configuration cache
write last fail" value so that the SPA_ASYNC_CONFIG_UPDATE request
will be handled promptly. A cleaner but more intrusive option would
be to use separate SPA_ASYNC_ flags for "configuration changed" and
"try writing the configuration cache again", but with FreeBSD 14.0
coming very soon I'd prefer to leave such refactoring for a later
date.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colin Percival <cperciva@FreeBSD.org>
Closes#15405
The change is simple -- restore the original code so that the VDEV
path is updated when using by-id paths. The more challenging part
was to devise a second ZTS test, that would test auto-replace for
'by-id' and help prevent a future regression.
With that new test, we can now do an A|B test with , and without,
the fix to confirm that auto-replace for by-id paths works. The
existing auto-replace test, functional/fault/auto_replace_001_pos,
will confirm that we didn't break auto-replace for 'by-vdev' paths.
In the original functional/fault/auto_replace_001_pos test, the disk
wipe (using dd) was not effective in removing the partitioning since
the kernel was never informed of the wipe.
Added a call to wipefs(8) so that the kernel is informed and ZED will
re-partition the device.
Added a validation step that the re-partitioning occurred by
confirming that the GPT partition UUID changes.
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#15363
Have libzfs call a special `zfs_prepare_disk` script before a disk is
included into the pool. The user can edit this script to add things
like a disk firmware update or a disk health check. Use of the script
is totally optional. See the zfs_prepare_disk manpage for full details.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15243
For synchronous write workloads with large IO sizes, a pool configured
with a slog performs worse than one with an embedded zil:
sequential_writes 1m sync ios, 16 threads
Write IOPS: 1292 438 -66.10%
Write Bandwidth: 1323570 448910 -66.08%
Write Latency: 12128400 36330970 3.0x
sequential_writes 1m sync ios, 32 threads
Write IOPS: 1293 430 -66.74%
Write Bandwidth: 1324184 441188 -66.68%
Write Latency: 24486278 74028536 3.0x
The reason is the `zil_slog_bulk` variable. In `zil_lwb_write_open`,
if a zil block is greater than 768K, the priority of the write is
downgraded from sync to async. Increasing the value allows greater
throughput. To select a value for this PR, I ran an fio workload with
the following values for `zil_slog_bulk`:
zil_slog_bulk KiB/s
1048576 422132
2097152 478935
4194304 533645
8388608 623031
12582912 827158
16777216 1038359
25165824 1142210
33554432 1211472
50331648 1292847
67108864 1308506
100663296 1306821
134217728 1304998
At 64M, the results with a slog are now improved to parity with an
embedded zil:
sequential_writes 1m sync ios, 16 threads
Write IOPS: 438 1288 2.9x
Write Bandwidth: 448910 1319062 2.9x
Write Latency: 36330970 12163408 -66.52%
sequential_writes 1m sync ios, 32 threads
Write IOPS: 430 1290 3.0x
Write Bandwidth: 441188 1321693 3.0x
Write Latency: 74028536 24519698 -66.88%
None of the other tests in the performance suite (run with a zil or
slog) had a significant change, including the random_write_zil tests,
which use multiple datasets.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: John Wren Kennedy <john.kennedy@delphix.com>
Closes#14378
- Group tqent_task and tqent_timeout_task into a union. They are
never used same time. This shrinks taskq_ent_t from 192 to 160 bytes.
- Remove tqent_registered. Use tqent_id != 0 instead.
- Remove tqent_cancelled. Use taskqueue pending counter instead.
- Change tqent_type into uint_t. We don't need to pack it any more.
- Change tqent_rc into uint_t, matching refcount(9).
- Take shared locks in taskq_lookup().
- Call proper taskqueue_drain_timeout() for TIMEOUT_TASK in
taskq_cancel_id() and taskq_wait_id().
- Switch from CK_LIST to regular LIST.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15356
Block cloning from an encrypted dataset into an unencrypted dataset
and vice versa is not possible. The current code did allow cloning
unencrypted files into an encrypted dataset causing a panic when
these were accessed. Block cloning between encrypted and encrypted
is currently supported on the same filesystem only.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Rob N <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#15464Closes#15465
When doing a manual TRIM on a zpool, the metaslab being TRIMmed is
potentially re-enabled before all queued TRIM zios for that metaslab
have completed. Since TRIM zios have the lowest priority, it is
possible to get into a situation where allocations occur from the
just re-enabled metaslab and cut ahead of queued TRIMs to the same
metaslab. If the ranges overlap, this will cause corruption.
We were able to trigger this pretty consistently with a small single
top-level vdev zpool (i.e. small number of metaslabs) with heavy
parallel write activity while performing a manual TRIM against a
somewhat 'slow' device (so TRIMs took a bit of time to complete).
With the patch, we've not been able to recreate it since. It was on
illumos, but inspection of the OpenZFS trim code looks like the
relevant pieces are largely unchanged and so it appears it would be
vulnerable to the same issue.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason King <jking@racktopsystems.com>
Illumos-issue: https://www.illumos.org/issues/15939Closes#15395
Always define _bashcompletiondir in the spec file to a reasonable value
when it is undefined. Required for `rpmbuild --rebuild <srpm>`.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15396
Update zfs_share_concurrent_shares test case to wait a few seconds
and recheck that the filesystem isn't shared. The intent here is
determine the nature of the error and if it may be a race.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15379
Everything listed in dist_noinst_SCRIPTS is assumed to be a shell
script, this generates a shellcheck SC1071 error since perl is not
supported. Move update_authors.pl to dist_noinst_DATA with the
other perl scripts.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob N <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15392
Right now, zpl_ioctl_ficlone and zpl_ioctl_ficlonerange do not call
put on the src fd if the source and destination are on two different
devices. This leaves the source file held open in this case.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Daniel Berlin <dberlin@dberlin.org>
Closes#15386
This issue should now be address by PR #15376 and the exception
for this test case be removed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15382
There was a report of zvol data loss (#15351) after enabling blk-mq on a
zvol backed with 16k physical block sized disks. Out of an abundance of
caution, do not allow the user to enable blk-mq until we can look into
the issue.
Note that blk-mq was not enabled by default on zvols. It was always
opt-in via the zvol_use_blk_mq module parameter.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Addresses: #15351Closes#15378
This is generated by scripts/update_authors.pl. I've looked over the
results fairly closely and while I don't think they're bad, they could
be improved somewhat, but also, I don't know if its good form to just
update this without explicit consent from those named.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15374
Full description of what's happening in comments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15374
This comes from the observation that a huge number of commit author
fields look quite strange (to my eyes), but quite often the
Signed-off-by: trailer has the correct name. For these I have updated
the name where it was obvious how to do so, however, I have not created
a mapping for the commit email to the Signed-off-by email, as whatever I
choose for email will become the prime candidate for inclusion in the
AUTHORS file, and care needs to be taken when acting without explicit
consent.
There's a small handful of commits that look like they were done on
local machines, or CI hosts, or similar, where the git authorship config
wasn't set up properly. Its obvious what this should look like, so I've
just done them.
The remainder is mapping Github noreply emails to either an
obviously-correct Signed-off-by trailer, or to a an author from another
commit. This was mostly done by hand, so there may be errors, but I
think its close. I do not understand where these come from - I know that
they're what commits made via Github web look like when there's no real
address set on the account, but I find it hard to believe that so many
of these came through the web, especially given the complexity of most
of the changes. I suspect there's some kind of merge helper tool in play
here. Regardless, the history is set now, and this tries to get it back
on track.
Obviously, all of this helps the history look tidy, but this also feeds
into the AUTHORS update script. See next commit.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15374
verify_fs_mount expects the dataset to remain unmounted after
updating the mountpoint property in delegate_common.kshlib.
This commit updates verify_fs_mount and uses nomount parameter
for zfs set to update the mountpoint property without mounting
the dataset.
This fixes the zfs_allow_010_pos test case, which was failing on
FreeBSD after the behavior update in setting the mountpoint
property.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15376
Relocate the zpool_import_hostid_changed* test cases to the Linux
runfile until these tests are modified to run cleanly on FreeBSD.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15377
This includes random small tweaks, primarily a build fixes, required
when ZFS is built as part of FreeBSD base.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15368
Followup e69ade32e1 by adding Gentoo's
bash completion path.
We should probably consider using/honouring the standard --with-bashcompletiondir
autoconf option as well, but that's something to do later.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Sam James <sam@gentoo.org>
Closes#15372
Benchmarks show that at certain write sizes range lock/unlock take
not so much time as extra memory copy. The exact threshold is not
obvious due to other overheads, but it is definitely lower than
~63KB used before. Make it configurable, defaulting at 7.5KB,
that is 8KB of nearest malloc() size minus itx and lr structs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15353
The recent patch to change the bash completion install location based
on the Distribution, ignored that it should still be possible to
create RPMs on Debian derived systems. Additionally `make deb` itself
creates RPMs and converts them via `alien`.
This patch adds the bashcompletiondir variable to the rpm defines and
uses this for the location, where to get the bash completion file.
It still changes the location on Debian/Ubuntu systems in the final
packages from /etc/bash_completion.d to
/usr/share/bash-completion/completions
Fixes: e69ade32e1
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes#15355Closes#15365
Previously, if a cachefile is passed to zpool import, the cached config
is mostly offered as-is to ZFS_IOC_POOL_TRYIMPORT->spa_tryimport(), and
the results are taken as the canonical pool config and handed back to
ZFS_IOC_POOL_IMPORT.
In the course of its operation, spa_load() will inspect the pool and
build a new config from what it finds on disk. However, it then
regenerates a new config ready to import, and so rightly sets the hostid
and hostname for the local host in the config it returns.
Because of this, the "require force" checks always decide the pool is
exported and last touched by the local host, even if this is not true,
which is possible in a HA environment when MMP is not enabled. The pool
may be imported on another head, but the import checks still pass here,
so the pool ends up imported on both.
(This doesn't happen when a cachefile isn't used, because the pool
config is discovered in userspace in zpool_find_import(), and that does
find the on-disk hostid and hostname correctly).
Since the systemd zfs-import-cache.service unit uses cachefile imports,
this can lead to a system returning after a crash with a "valid"
cachefile on disk and automatically, quietly, importing a pool that has
already been taken up by a secondary head.
This commit causes the on-disk hostid and hostname to be included in the
ZPOOL_CONFIG_LOAD_INFO item in the returned config, and then changes the
"force" checks for zpool import to use them if present.
This method should give no change in behaviour for old userspace on new
kernels (they won't know to look for the new config items) and for new
userspace on old kernels (the won't find the new config items).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15290
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15290
Here I'm trying to succinctly introduce the concept, the basics of its
construction, how its different to dedup, how to use it, and where its
limitations lie, in four paragraphs and with enough searchable terms to
help the reader find more information both within OpenZFS and elsewhere.
Phew.
Sponsored-By: Klara, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15362
Before this change ZFS created threads for 50% of CPUs for each top-
level vdev. Plus it created the same number of threads for embedded
log groups (that have only one metaslab and don't need any preload).
As result, on system with 80 CPUs and pool of 60 vdevs this resulted
in 4800 metaslab preload threads, that is absolutely insane.
This patch changes the preload threads to 50% of CPUs in one taskq
per pool, so on the mentioned system it will be only 40 threads.
Among other things this fixes zdb on the mentioned system and pool
on FreeBSD, that failed to create so many threads in one process.
Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15319
As a first step for automatic FreeBSD testing add a build and install
for FreeBSD versions 12.4, 13.2 and 14-snapshot using Cirrus CI.
Reviewed-by: Jose Luis Duran
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#15332
We're still seeing this test fail intermittently (that is, the clone
happens), which must mean the write and the clone can still be happening
on different txgs.
It might be that there's still activity after the pool is created. So
here we force a sync before starting the write.
Sponsored-By: Klara Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15359
To reduce memory usage ZFS crypto allocated bigger by 56 bytes ARC
headers only when specific block was encrypted on disk. It was a
nice optimization, except in some cases the code reallocated them
on fly, that invalidated header pointers from the buffers. Since
the buffers use different locking, it created number of races, that
were originally covered (at least partially) by b_evict_lock, used
also to protection evictions. But it has gone as part of #14340.
As result, as was found in #15293, arc_hdr_realloc_crypt() ended
up unprotected and causing use-after-free.
Instead of introducing some even more elaborate locking, this patch
just drops the difference between normal and protected headers. It
cost us additional 56 bytes per header, but with couple patches
saving 24 bytes, the net growth is only 32 bytes with total header
size of 232 bytes on FreeBSD, that IMHO is acceptable price for
simplicity. Additional locking would also end up consuming space,
time or both.
Reviewe-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15293Closes#15347
In most cases we do not care about exact number of buffers linked
to the header, we just need to know if it is zero, non-zero or one.
That can easily be checked just looking on b_buf pointer or in some
cases derefencing it.
b_ebufcnt is read only once, and in that case we already traverse
the list as part of arc_buf_remove(), so second traverse should not
be expensive.
This reduces L1 ARC header size by 8 bytes and full crypto header by
16 bytes, down to 176 and 232 bytes on FreeBSD respectively.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15350
Earlier as part of #14123 I've removed one use of b_cv. This patch
reuses the same approach to remove the other one from much more
rare code path.
This saves 16 bytes of L1 ARC header on FreeBSD (reducing it from
200 to 184 bytes) and seems even more on Linux.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15340
The Arm Branch Target Identification (BTI) extension guards against
branching to an unintended instruction.
To support BTI add the landing pad instructions to the SHA2 functions.
These are from the hint space so are a nop on hardware that lacks BTI
support or if BTI isn't enabled.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Andrew Turner <andrew.turner4@arm.com>
Closes#14862Closes#15339
This commit adds '-u' flag for zfs set operation. With this flag,
mountpoint, sharenfs and sharesmb properties can be updated
without actually mounting or sharing the dataset.
Previously, if dataset was unmounted, and mountpoint property was
updated, dataset was not mounted after the update. This behavior
is changed in #15240. We mount the dataset whenever mountpoint
property is updated, regardless if it's mounted or not.
To provide the user with option to keep the dataset unmounted and
still update the mountpoint without mounting the dataset, '-u'
flag can be used.
If any of mountpoint, sharenfs or sharesmb properties are updated
with '-u' flag, the property is set to desired value but the
operation to (re/un)mount and/or (re/un)share the dataset is not
performed and dataset remains as it was before.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15322
For sharesmb and sharenfs properties, the status of setting the
property is tied with whether we succeed to share the dataset or
not. In case sharing the dataset is not successful, this is
treated as overall failure of setting the property. In this case,
if we check the property after the failure, it is set to on.
This commit updates this behavior and the status of setting the
share properties is not returned as failure, when we fail to
share the dataset.
For sharenfs property, if access list is provided, the syntax
errors in access list/host adresses are not validated until after
setting the property during postfix phase while trying to
share the dataset. This is not correct, since the property has
already been set when we reach there.
Syntax errors in access list/host addresses are validated while
validating the property list, before setting the property and
failure is returned to user in this case when there are errors
in access list.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15240
There are some inconsistencies in the handling of mountpoint
property. This commit updates the behavior and makes it
consistent.
If mountpoint property is set when dataset is unmounted, this
would update the mountpoint property. The mountpoint could be
valid or invalid in this case. Setting the mountpoint property
would result in success in this case. Dataset would still be
unmounted here.
On the other hand, if dataset is mounted and mountpoint
property is updated to something invalid where mount cannot be
successful, for example, setting the mountpoint inside a readonly
directory. This would unmount the dataset, set the mountpoint
property to requested value and tries to mount the dataset. The
mount operation returns error and this error is treated as
overall failure of setting the property while the property is
actually set.
To make the behavior consistent in case dataset is mounted or
unmounted, we should try to mount the dataset whenever mountpoint
property is updated. This would result in mounting the datasets
if canmount property is set to on, regardless if the dataset was
previously unmounted.
The failure in mount operation while setting the mountpoint
property should not be treated as failure, since the property is
actually set now to user requested value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15240
tested by running:
```
./configure --with-config=user; cp -a contrib/debian .
dpkg-buildpackage -b -uc -us
```
on a Debian 12 based system.
and checking where the completion file got installed.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes#15304
Follows b191f9a13d3005621ead9a727b811892264505ef from Debian's
packaging team at:
https://salsa.debian.org/zfsonlinux-team/zfs/
The previous build-dependency is kept as option, to still be able to
build on older Debian based distros (e.g. Ubuntu 20.04).
Without this building on Debian 12/bookworm does not work, as `dkms`
is a virtual package.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes#15304
Certain Linux distributions (Debian/Ubuntu at least) expect
bash-completion snippets to be installed in
/usr/share/bash-completion/completions instead of
/etc/bash_completion.d.
This patch sets the bashcompletiondir variable based on the vendor,
inspired by similar settings for initdir and initconfdir.
It seems that commit 612b8dff5b
caused the file to be installed in the first-place (thus the error
when building debian packages only became apparent when testing a
2.2.0-rc4 build)
The change only sets the variable in Makefile context - the
rpm/zfs.spec.in file has the path hardcoded as
%{_sysconfdir}/bash_completion.d/zfs, but since running
```
./configure --sysconfdir=/myetc ; make rpm
```
also results in all relevant files to be installed in /etc instead of
/myetc I assume this can remain as is.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes#15304
In dnode_destroy, dn_objset is invalidated. However, it will later call
into dbuf_destroy, in which DTRACE_SET_STATE will try to access spa_name
via dn_objset causing illegal pointer access.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#15333
Commit 8af1104f does not actually store the ashift of cache devices in
their label. However, in order to facilitate reporting the ashift
through zdb, we enable this in the present commit. We also document
how the retrieval of the ashift is done.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#15331
If we are copying only one block and it is smaller than recordsize
property, do not allow destination to grow beyond one block if it
is not there yet. Otherwise the destination will get stuck with
that block size forever, that can be as small as 512 bytes, no
matter how big the destination grow later.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15321
Vendor testing shows we should be able to get a little more
performance if we further relax the hard limit which we're hitting.
Authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15324
When unlinking multiple files from a pool at 100% capacity, it
was possible for ENOSPC to be returned after the first few unlinks.
This issue was fixed previously by PR #13172 but then this was
again introduced by PR #13839.
This is resolved using the existing mechanism of returning ERESTART
when over quota as long as we know enough space will shortly be
available after processing the pending deferred frees.
Also, updated the existing testcase which reliably reproduced the
issue without this patch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#15312
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15315
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15316
"zfs_share_concurrent_shares" may fail on FreeBSD and some Linux
distributions (fedora). Move it to the common list.
"zfs_allow_010_pos" has been observed to fail on FreeBSD 13.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15306
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15309
The problem that was occurring is basically that a device was removed
by ztest and replaced with another device. It was then reguided. The
import then failed because there were two possible imports with the
same name; one with the new guid, and one with the old. This can
happen because the label writes from the device removal/replacement
can be subject to ztest's error injection.
The other ways to fix this would be to change the error injection to
not trigger on removals (which may not be technically feasible), or
to change the import code to not report configurations that are so
short on devices (which would potentially have unpleasant end-user
effects when trying to recover from data losses/device configuration
issues).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15298
While working on similar patches for zfs and zvol in #15153 I've
forgot about ztest. Update it also so that we test the same code
paths as use in production.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15301
We've observed this test failing intermittently. When it does, the
"same block" check shows that both files have the same content, that is,
the file was cloned.
The only way this could have happened is if the open txg moved between
the dd and clonefile calls. That's possible because although we set
zfs_txg_timeout to be large, that only affects the wait time in the sync
thread at the start of a new txg; it doesn't change anything if its
currently waiting or working.
So here we just force the txgs to move immediately before, which should
get both operations onto the same txg as intented.
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris Rob Norris <rob.norris@klarasystems.com>
Closes#15303
When failmode=continue is set and the pool suspends, both 'zpool status'
and the 'zfs/pool/state' kstat ignore it and report the normal vdev tree
state. There's no clear indicator that the pool is suspended. This is
unlike suspend in failmode=wait, or suspend due to MMP check failure,
which both report "SUSPENDED" explicitly.
This commit changes it so SUSPENDED is reported for failmode=continue
the same as for other modes.
Rationale:
The historical behaviour of failmode=continue is roughly, "press on as
though all is well". To this end, the fact that the pool had suspended
was not shown, to maintain the façade that all is well.
Its unclear why hiding this information was considered appropriate. One
possibility is that it was expected that a true pool fault would always
be reported as DEGRADED or FAULTED, and that the pool could not suspend
without these happening.
That is not necessarily true, as vdev health and suspend state are only
loosely connected, such that a pool in (apparent) good health can be
suspended for good reasons, and of course a degraded pool does not lead
to suspension. Even if that expectation were true, there's still a
difference in urgency - a degraded pool may not need to be attended to
for hours, while a suspended pool is most often unusable until an
operator intervenes.
An operator that has set failmode=continue has presumably done so
because their workload is one that can continue to operate in a useful
way when the pool suspends. In this case the operator still needs a
clear indicator that there is a problem that needs attending to.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15297
We have occasional crashes in the rsend tests. Debugging revealed
that this is because the send_worker thread is getting EINTR from
splice(). This happens when a non-fatal signal is received during
the syscall. We should retry the syscall, rather than exiting failure.
Tweak the loop to only break if the splice is finished or we receive
a non-EINTR error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15273
'program help subcommand' is a reasonably common pattern for
multifunction command-line programs. This commit adds support for that
style to the zpool and zfs commands.
When run as 'zpool help [<topic>]' or 'zfs help [<topic>]', executes the
'man' program on the PATH with the most likely manpage name for the
requested topic: "zpool-<topic>" or "zfs-<topic>" for subcommands, or
"zpool<topic>" or "zfs<topic>" for the "concepts" and "props" topics.
If no topic is supplied, uses the top "zpool" or "zfs" pages.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15288
There is an occasional ztest failure that looks like ztest: attach
(/var/tmp/zloop-run/ztest.13a 570425344, draid1-1-0 532152320, 1)
returned 22, expected 95. This is because the value that we return
is EINVAL, but expected_error is set incorrectly.
Change the expected_error value to match both the comment and the
actual error value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15295
In #13375 we modified the allocation size of the buffer that we use
to apply l2arc transforms to be the size of the arc hdr we're using,
rather than the allocation size that will be in place on the disk,
because sometimes the hdr size is larger. Unfortunately, sometimes
the allocation size is larger, which means that we overflow the buffer
in that case. This change modifies the allocation to be the max of
the two values
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15177Closes#15248
'pam_change_unmounted' and 'pam_recursive' both exist and are referenced
by the test run config, but weren't being installed and so are excluded.
This gets them installed so they will run as expected.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15291
zil_lwb_set_zio_dependency() can not set write ZIO dependency on
previous LWB's write ZIO if one is already in done handler and set
state to LWB_STATE_WRITE_DONE. So theoretically done handler of
next LWB's write ZIO may run before done handler of previous LWB
write ZIO completes. In such case we can not defer flushes, since
the flush issue process is not locked.
This may fix some reported assertions of lwb_vdev_tree not being
empty inside zil_free_lwb().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15278
Added in ab26409db7 ("Linux 3.1 compat, super_block->s_shrink"), with
the only consumer which needed the count getting retired in 066e825221
("Linux compat: Minimum kernel version 3.10").
The counter gets in the way of not maintaining the list to begin with.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#15274
Allow zed to autoreplace vdevs marked as REMOVED. Also update
statechange-led zedlet to toggle fault LEDs for REMOVED vdevs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15281
Commit 2d7843401a had previously
updated this hardcoded limit to allow for CI testing. As there
is no deterministic pass/fail value, the need has arisen for
one more small increase.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Edmund Nadolski <edmund.nadolski@ixsystems.com>
Closes#15252
spa_upgrade_errlog() does not update the MOS directory when the
head_errlog feature is enabled. In this case if spa_errlog_sync() is not
called, the MOS dir references the old errlog_last and errlog_sync
objects. Thus when doing a scrub a panic will occur:
Call Trace:
dump_stack+0x6d/0x8b
panic+0x101/0x2e3
spl_panic+0xcf/0x102 [spl]
delete_errlog+0x124/0x130 [zfs]
spa_errlog_sync+0x256/0x260 [zfs]
spa_sync_iterate_to_convergence+0xe5/0x250 [zfs]
spa_sync+0x2f7/0x670 [zfs]
txg_sync_thread+0x22d/0x2d0 [zfs]
thread_generic_wrapper+0x83/0xa0 [spl]
kthread+0x104/0x140
ret_from_fork+0x1f/0x40
Fix this by updating the related MOS directory objects in
spa_upgrade_errlog().
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#15279Closes#15277
Update the META file to reflect compatibility with the 6.5
kernel.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
When register_sysctl_table() is unavailable we fail to properly
unregister sysctl entries under "kernel/spl".
This leads to errors like the following when spl is unloaded/reloaded,
making impossible to properly reload the spl module:
[ 746.995704] sysctl duplicate entry: /kernel/spl/kmem/slab_kvmem_total
Fix by cleaning up all the sub-entries inside "kernel/spl" when the
spl module is unloaded.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes#15239
If we fail to create a proc entry in spl_proc_init() we may end up
calling unregister_sysctl_table() twice: one in the failure path of
spl_proc_init() and another time during spl_proc_fini().
Avoid the double call to unregister_sysctl_table() and while at it
refactor the code a bit to reduce code duplication.
This was accidentally introduced when the spl code was
updated for Linux 6.5 compatibility.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes#15234Closes#15235
Using the filemap_splice_read function for the splice_read handler was
leading to occasional data corruption under certain circumstances. Favor
using copy_splice_read instead, which does not demonstrate the same
erroneous behavior under the tested failure cases.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15164
The generic_file_splice_read function was removed in Linux 6.5 in favor
of filemap_splice_read. Add an autoconf test for filemap_splice_read and
use it if it is found as the handler for .splice_read in the
file_operations struct. Additionally, ITER_PIPE was removed in 6.5. This
change removes the ITER_* macros that OpenZFS doesn't use from being
tested in config/kernel-vfs-iov_iter.m4. The removal of ITER_PIPE was
causing the test to fail, which also affected the code responsible for
setting the .splice_read handler, above. That behavior caused run-time
panics on Linux 6.5.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15155
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15138
This reverts commit b35374fd64 as there
are error messages when loading the SPL module. Errors seemed to be tied
to duplicate a duplicate entry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#15134
An iov_iter_type() function to access the "type" member of the struct
iov_iter was added at one point. Move the conditional logic to decide
which method to use for accessing it into a macro and simplify the
zpl_uio_init code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15100
The iov_iter->iov member is now iov_iter->__iov and must be accessed via
the accessor function iter_iov(). Create a wrapper that is conditionally
compiled to use the access method appropriate for the target kernel
version.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15100
Multiple changes to the blkdev API were introduced in Linux 6.5. This
includes passing (void* holder) to blkdev_put, adding a new
blk_holder_ops* arg to blkdev_get_by_path, adding a new blk_mode_t type
that replaces uses of fmode_t, and removing an argument from the release
handler on block_device_operations that we weren't using. The open
function definition has also changed to take gendisk* and blk_mode_t, so
update it accordingly, too.
Implement local wrappers for blkdev_get_by_path() and
vdev_blkdev_put() so that the in-line calls are cleaner, and place the
conditionally-compiled implementation details inside of both of these
local wrappers. Both calls are exclusively used within vdev_disk.c, at
this time.
Add blk_mode_is_open_write() to test FMODE_WRITE / BLK_OPEN_WRITE
The wrapper function is now used for testing using the appropriate
method for the kernel, whether the open mode is writable or not.
Emphasize fmode_t arg in zvol_release is not used
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15099
When disk_check_media_change() exists, then define
zfs_check_media_change() to simply call disk_check_media_change() on
the bd_disk member of its argument. Since disk_check_media_change()
is newer than when revalidate_disk was present in bops, we should
be able to safely do this via a macro, instead of recreating a new
implementation of the inline function that forces revalidation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15101
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15098
- We cannot clone into files with smaller block size if there is
more than one block, since we can not grow the block size.
- Block size must be power-of-2 if destination offset != 0, since
there can be no multiple blocks of non-power-of-2 size.
The first should handle the case when destination file has several
blocks but still is not bigger than one block of the source file.
The second fixes panic in dmu_buf_hold_array_by_dnode() on attempt
to concatenate files with equal but non-power-of-2 block sizes.
While there, assert that error is reported if we made no progress.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
For zpool import and zpool split, zpool_enable_datasets is called
to mount and share all datasets in a pool. If there is an error
while mounting or sharing any dataset in the pool, the status of
import or split is reported as failure. However, the changes do
show up in zpool list.
This commit updates the error reporting in zpool import and zpool
split path. More descriptive messages are shown to user in case
there is an error during mount or share. Errors in mount or share
do not effect the overall status of zpool import and zpool split.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15216
In zil_lwb_write_issue(), after issuing lwb_root_zio/lwb_write_zio,
we have no right to access lwb->lwb_child_zio. If it was not there,
the first two ZIOs may have already completed and freed the lwb.
ZIOs issue in opposite order from children to parent should keep
the lwb valid till the end, since the lwb can be freed only after
lwb_root_zio completion callback.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15233
While I have no reports of it, I suspect possible use-after-free
scenario when zil_commit_waiter() tries to dereference zcw_lwb
for lwb already freed by zil_sync(), while zcw_done is not set.
Extension of zl_lock scope as it was originally should block
zil_sync() from freeing the lwb, closing this race.
This reverts #14959 and couple chunks of #14841.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15228
In zil_free_lwb() we should first assert lwb_state or the rest of
assertions can be misleading if it is false.
Add lwb_state assertions in zil_lwb_add_block() to make sure we are
not trying to add elements to lwb_vdev_tree after it was processed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15227
Building module/zfs/dbuf.c for 32-bit targets can result in a warning:
In file included from
/usr/src/sys/contrib/openzfs/include/sys/zfs_context.h:97,
from /usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:32:
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c: In function
'dmu_buf_will_clone':
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:116:33: error:
cast from pointer to integer of different size
[-Werror=pointer-to-int-cast]
116 | const uint64_t __left = (uint64_t)(LEFT);
\
| ^
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:148:25: note:
in expansion of macro 'VERIFY0'
148 | #define ASSERT0 VERIFY0
| ^~~~~~~
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:2704:9: note: in
expansion of macro 'ASSERT0'
2704 | ASSERT0(dbuf_find_dirty_eq(db, tx->tx_txg));
| ^~~~~~~
This is because dbuf_find_dirty_eq() returns a pointer, which if
pointers are 32-bit results in a warning about the cast to uint64_t.
Instead, use the ASSERT3P() macro, with == and NULL as second and third
arguments, which should work regardless of the target's bitness.
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#15224
Try to clarify wording to reduce zpool add incidents.
Add an attach example.
Reviewed-by: Rich Ercolani <Rincebrain@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#15179
Intel SPR erratum SPR4 says that if you trip into a vmexit while
doing FPU save/restore, your AMX register state might misbehave...
and by misbehave, I mean save all zeroes incorrectly, leading to
explosions if you restore it.
Since we're not using AMX for anything, the simple way to avoid
this is to just not save/restore those when we do anything, since
we're killing preemption of any sort across our save/restores.
If we ever decide to use AMX, it's not clear that we have any
way to mitigate this, on Linux...but I am not an expert.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#14989Closes#15168
The statechange-slot_off.sh zedlet which was added in #15200
needed to be installed so it's included by the packages.
Additional testing has also shown that multiple retries are
often needed for the script to operate reliably.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15210
- Distribute zfs-[un]jail.8 on FreeBSD and zfs-[un]zone.8 on Linux
- zfsprops.7: mirror zoned/jailed, only available on respective platforms
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#15161
`get_same_blocks` is a helper to compare two files and return a list of
the blocks that are clones of each other. Its very necessary for block
cloning tests.
Previously it was incorrectly called `unique_blocks`, which is the
_inverse_ of what it does (an early version did list unique blocks; it
was changed but the name was not). So if nothing else, it should be
called `duplicate_blocks`.
But, keeping the details of a clone operation in your head is actually
quite difficult, without the additional overhead of wondering how the
tools work. So I've renamed it to better describe what it does, added a
usage note, and changed it to return block indexes from 0 instead of 1,
to match how L0 blocks are normally counted.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15181
As part of some internal gang block testing within Delphix
we hit the assertion removed by this patch. The assertion
was triggered by a ZIO that had two copies and was a gang
block making the following expression equal to 3:
```
MIN(zp->zp_copies + BP_IS_GANG(bp), spa_max_replication(spa))
```
and failing when we expected the above to be equal to
`BP_GET_NDVAS(bp)`.
The assertion is no longer valid since the following commit:
```
commit 14872aaa4f
Author: Matthew Ahrens <matthew.ahrens@delphix.com>
Date: Mon Feb 6 09:37:06 2023 -0800
EIO caused by encryption + recursive gang
```
The above commit changed gang block headers so they can't
have more than 2 copies but the assertion in question from
this PR was never updated.
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#15180
If ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT is enabled in zed.rc, then
power off the drive's slot in the enclosure if it becomes FAULTED.
This can help silence misbehaving drives. This assumes your drive
enclosure fully supports slot power control via sysfs.
Reviewed-by: @AllKind
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15200
In 019dea0a5 we removed the conversion from EAGAIN->EXDEV inside
zfs_clone_range(), but forgot to add a test for EAGAIN to the
copy_file_range() entry points to trigger fallback to a content copy.
This commit fixes that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15170Closes#15172
For Native Debian packaging, zinject binary and man page is
packaged in ZFS test package. zinject is not not directly related
to ZTS and should be packaged with other utilities, like it is
present in zfs_<ver>.rpm/deb packages.
This commit moves zinject binary and man page from openzfs-zfs-test
to openzfs-zfsutils package.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15160
Support mountpoint=legacy for the root dataset in the dracut zfs support
scripts.
mountpoint=/ or mountpoint=/sysroot also works.
Change zfs-env-bootfs.service to add zfsutil to BOOTFSFLAGS only for
root datasets with mountpoint != legacy.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Closes#15149
Return the more descriptive error codes instead of `EXDEV` when
the parameters don't match the requirements of the clone function.
Updated the comments in `brt.c` accordingly.
The first three errors are just invalid parameters, which zfs can
not handle.
The fourth error indicates that the block which should be cloned
is created and cloned or modified in the same transaction
group (`txg`).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes#15148
POSIX timers target the process, not the thread (as does SIGINFO),
so we need to block it in the main thread which will die if interrupted.
Ref: https://101010.pl/@ed1conf@bsd.network/110731819189629373
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#15113
When compiling a kernel with bcachefs and zfs,
the two macros will collide, making it impossible
to have both filesystems.
It is sufficient to just undefine the macro before calling it.
On why this should be in ZFS rather than bcachefs, currently,
bcachefs is not a in-tree filesystem, but,
it has a reasonably high chance of getting included soon.
This avoids the breakage in ZFS early,
this patch may be distributed downstream in NixOS
and is already used there.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Lahfa <ryan@lahfa.xyz>
Closes#15144
The previous patch #14841 appeared to have significant flaw, causing
deadlocks if zl_get_data callback got blocked waiting for TXG sync. I
already handled some of such cases in the original patch, but issue
#14982 shown cases that were impossible to solve in that design.
This patch fixes the problem by postponing log blocks allocation till
the very end, just before the zios issue, leaving nothing blocking after
that point to cause deadlocks. Before that point though any sleeps are
now allowed, not causing sync thread blockage. This require slightly
more complicated lwb state machine to allocate blocks and issue zios
in proper order. But with removal of special early issue workarounds
the new code is much cleaner now, and should even be more efficient.
Since this patch uses null zios between write, I've found that null
zios do not wait for logical children ready status in zio_ready(),
that makes parent write to proceed prematurely, producing incorrect
log blocks. Added ZIO_CHILD_LOGICAL_BIT to zio_wait_for_children()
fixes it.
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15122
If we get next block allocation error during log write, we trigger
transaction commit. But the block we have just completed is still
written and transactions it covers will be acknowledged normally.
If after that we ignore the block during replay just because it is
the last in the chain, we may not replay some transactions that we
have acknowledged as synced, that is not right.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15132
In most cases dmu_sync() works with dirty records directly and does
not need actual data. The only exception is dmu_sync_late_arrival().
To save some CPU time use dmu_buf_hold_noread*() in z*_get_data()
and explicitly call dbuf_read() in dmu_sync_late_arrival(). There
is also a chance that by that time TXG will already be synced and
we won't have to do it at all.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15153
Fastwrite was introduced many years ago to improve ZIL writes spread
between multiple top-level vdevs by tracking number of allocated but
not written blocks and choosing vdev with smaller count. It suposed
to reduce ZIL knowledge about allocation, but actually made ZIL to
even more actively report allocation code about the allocations,
complicating both ZIL and metaslabs code.
On top of that, it seems ZIO_FLAG_FASTWRITE setting in dmu_sync()
was lost many years ago, that was one of the declared benefits. Plus
introduction of embedded log metaslab class solved another problem
with allocation rotor accounting both normal and log allocations,
since in most cases those are now in different metaslab classes.
After all that, I'd prefer to simplify already too complicated ZIL,
ZIO and metaslab code if the benefit of complexity is not obvious.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15107
The transaction there does not produce any dirty data or log blocks,
so it should not be throttled. All other cases wait for TXG sync, by
which time the log block we are writing will be obsolete, so we can
skip waiting and just return error here instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15096
When the vdev properties features was merged an extra check
was added in `spa_vdev_remove_top_check()` which checked
whether the vdev that we want to remove is already being
removed and if so return an EALREADY error.
```
static int
spa_vdev_remove_top_check(vdev_t *vd)
{
... <snip> ...
/*
* This device is already being removed
*/
if (vd->vdev_removing)
return (SET_ERROR(EALREADY));
```
Before that change we'd still fail with an error but it
was a more generic one - here is the check that failed
later in the same function:
```
/*
* There can not be a removal in progress.
*/
if (spa->spa_removing_phys.sr_state == DSS_SCANNING)
return (SET_ERROR(EBUSY));
```
Changing the error code returned from that function changed
the behavior of the removal's library interface exposed to
the userland - `spa_vdev_remove()` now returns `EZFS_UNKNOWN`
instead of `EZFS_EBUSY` that was returning before.
This patch adds logic to make `spa_vdev_remove()` mindful
of the new EALREADY code and propagating `EZFS_EBUSY`
reverting to the previously established semantics of that
function.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#15013Closes#15129
If looking up a snapdir inode failed, hold pool config – hold the
snapshot – get its creation property – release it – release it,
then use that as the [amc]time in the allocated inode. If that
fails then fall back to current time. No performance impact since
this is only done when allocating a new snapdir inode.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#15110Closes#15117
glibc includes sys/types.h from stdlib.h. This is not the case for MUSL,
so explicitly include it. Fixes usage of uint_t.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Zach Dykstra <dykstra.zachary@gmail.com>
Closes#15130
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes#15128
Before Linux 5.3, the filesystem's copy_file_range handler had to signal
back to the kernel that we can't fulfill the request and it should
fallback to a content copy. This is done by returning -EOPNOTSUPP.
This commit converts the EXDEV return from zfs_clone_range to
EOPNOTSUPP, to force the kernel to fallback for all the valid reasons it
might be unable to clone. Without it the copy_file_range() syscall will
return EXDEV to userspace, breaking its semantics.
Add test for copy_file_range fallbacks. copy_file_range should always
fallback to a content copy whenever ZFS can't service the request with
cloning.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15131
This gives `zdb -b` support for clone blocks.
Previously, it didn't know what clones were, so would count their space
allocation multiple times and then report leaked space (or, in debug,
would assert trying to claim blocks a second time).
This commit fixes those bugs, and reports the number of clones and the
space "used" (saved) by them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15123
Return the more descriptive EOPNOTSUPP instead of EXDEV when the
storage pool doesn't support block cloning.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes#15097
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050Closes#405Closes#13349
Redhat have backported copy_file_range and clone_file_range to the EL7
kernel using an "extended file operations" wrapper structure. This
connects all that up to let cloning work there too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050
Prior to Linux 4.5, the FICLONE etc ioctls were specific to BTRFS, and
were implemented as regular filesystem-specific ioctls. This implements
those ioctls directly in OpenZFS, allowing cloning to work on older
kernels.
There's no need to gate these behind version checks; on later kernels
Linux will simply never deliver these ioctls, instead calling the
approprate VFS op.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050
This implements the Linux VFS ops required to service the file
copy/clone APIs:
.copy_file_range (4.5+)
.clone_file_range (4.5-4.19)
.dedupe_file_range (4.5-4.19)
.remap_file_range (4.20+)
Note that dedupe_file_range() and remap_file_range(REMAP_FILE_DEDUP) are
hooked up here, but are not implemented yet.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050
Block cloning introduced a new state transition from DB_NOFILL to
DB_READ. This occurs when a block is cloned and then read on the
current txg.
In this case, the clone will move the dbuf to DB_NOFILL, and then the
read will be issued for the overidden block pointer. If that read is
still outstanding when it comes time to write, the dbuf will be in
DB_READ, which is not handled by the checks in dbuf_sync_leaf, thus
tripping the assertions.
This updates those checks to allow DB_READ as a valid state iff the
dirty record is for a BRT write and there is a override block pointer.
This is a safe situation because the block already exists, so there's
nothing that could change from underneath the read.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Original-patch-by: Kay Pedersen <mail@mkwg.de>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050
dbuf_undirty() will (correctly) only removed dirty records for the given
(open) txg. If there is a dirty record for an earlier closed txg that
has not been synced out yet, then db_dirty_records will still have
entries on it, tripping the assertion.
Instead, change the assertion to only consider the current txg. To some
extent this is redundant, as its really just saying "did dbuf_undirty()
work?", but it it doesn't hurt and accurately expresses our
expectations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Original-patch-by: Kay Pedersen <mail@mkwg.de>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050
bv_entcount can be a relatively large allocation (see comment for
BRT_RANGESIZE), so get it from the big allocator.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050
Just silencing the warning about large allocations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes#15050
For large JBODs the log message "zfs_iter_vdev: no match" can
account for the bulk of the log messages (over 70%). Since this
message is purely informational and not that useful we remove it.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15086Closes#15094
Update the META file to reflect compatibility with the 6.4 kernel.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#15095
This locking was recently added as part of #14979. But appears it
is illegal to take zl_issuer_lock while holding dp_config_rwlock,
taken by dsl_pool_hold(). It causes deadlock with sync thread in
spa_sync_upgrades(). On a second thought, we should not
need this locking, since zil_commit_impl() we call below takes
zl_issuer_lock, that should sufficiently protect zl_suspend reads,
combined with other logic from #14979.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15103
When we have some LWBs closed and their ZIOs ready to be issued, we
can not afford sleeping on config lock if somebody else try to lock
it as writer, or it will cause a deadlock.
To solve it, move spa_config_enter() from zil_lwb_write_issue() to
zil_lwb_write_close() under zl_issuer_lock to enforce lock ordering
with other threads. Now if we can't immediately lock config, issue
all previously closed LWBs so that they could drop their config
locks after completion, and only then allow sleeping on our lock.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15078Closes#15080
This new check in 0.9.0 appears to have some issues with various forms
of "early return", like trap, exit and return. This is tripping up (at
least):
cmd/zed/zed.d/history_event-zfs-list-cacher.sh
/etc/zfs/zfs-functions
Its not obvious what its complaining about or what the remedy is, so it
seems sensible to disable this check for now.
See also:
https://www.shellcheck.net/wiki/SC2317https://github.com/koalaman/shellcheck/issues/2542https://github.com/koalaman/shellcheck/issues/2613
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#15089
metaslab_force_ganging isn't enough to actually force ganging, because
it still only forces 3% of the time. This adds
metaslab_force_ganging_pct so we can configure how often to force
ganging.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#15088
- Reduce maximum prefetch distance for 32bit platforms to 8MB as it
was previously. Those systems didn't grow much probably, so better
stay conservative there.
- Retire array_rd_sz tunable, blocking prefetch for large requests.
We should not penalize applications trying to be more efficient. The
speculative prefetcher by itself has reasonable distance limits, and
1MB is not much at all these days.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15072
To simplify error handling bpobj_iterate_blkptrs() iterates through
the list of block pointers backwards. Unfortunately speculative
prefetcher is currently unable to detect such patterns, that makes
each block read there synchronous and very slow on HDD pools.
According to my tests, added explicit prefetch reduces time needed
to asynchronously delete 8 snapshots of 4 million blocks each from
20 seconds to less than one, that should free sync thread for other
useful work, such as async writes, scrub, etc.
While there, plug one memory leak in case of bpobj_open() error and
harmonize some variable names.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15071
With anything but fletcher-4, even a tiny change in the input will cause
the checksum value to change completely. So knowing the actual and
expected checksums doesn't provide much more information than "they
don't match". The harm in sending them is simply that they bloat the
event. In particular, on FreeBSD the event must fit into a 1016 byte
buffer.
Fixes#14717 for mirrored pools.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes#14717Closes#15052
The checksum histograms were intended to be used with ATA and parallel
SCSI, which are obsolete. With modern storage hardware, they will
almost always look like white noise; all bits will be wrong. They only
serve to bloat the event. That's a particular problem on FreeBSD, where
events must fit into a 1016 byte buffer.
This fixes issue #14717 for RAIDZ pools, but not for mirror pools.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes#15052
We would see zed assert on one of our systems if we powered off a
slot. Further examination showed zfs_retire_recv() was reporting
a GUID of 0, which in turn would return a NULL nvlist. Add
in a check for a zero GUID.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15084
Since spa_min_alloc may not be a power of 2, unlike ashifts, in the
case of DRAID, we should not select the minimal value among several
vdevs. Rounding to a multiple of it is unlikely to work for other
vdevs. Instead, using the greatest common divisor produces smaller
yet more reasonable results.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15067
Check that vdev has valid zap and bail out early.
While here, move objid selection out of the loop, it's not going to
change.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes#15063
Ashift can be set for a vdev only during its creation, and the
top-level vdev does not change when a vdev is attached or replaced.
The ashift property should not be used during attachment, as it
does not allow attaching/replacing a vdev if the pool's ashift
property is increased after the existing vdev was created. Instead,
we should be able to attach the vdev if the attached vdev can
satisfy the ashift requirement with its parent.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15061
On my machines I observe random failures caused by rollback happening
after zfs root is mounted. I've observed two types of failures:
- zfs-rollback-bootfs.service fails saying that rollback must be
done just before mounting the dataset
- boot process fails and rescue console is entered.
After making this modification and testing it for couple of days
none of those problems have been observed anymore.
I don't know if `dracut-mount.service` is still needed in the
`After` directive. Maybe someone else is able to address this?
Reviewed-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Signed-off-by: Wojciech Małota-Wójcik <59281144+outofforest@users.noreply.github.com>
Closes#15025
Set ARC_FLAG_NO_BUF when prefetching data L1 buffers for scan. We
do not prefetch data L0 buffers, so we do not need the L1 buffers,
only want them to be ready in ARC. This saves some CPU time on the
buffers decompression.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15029
The disk_check_media_change() function was added which replaces
bdev_check_media_change. This change was introduced in 6.5rc1
444aa2c58cb3b6cfe3b7cc7db6c294d73393a894 and the new function takes a
gendisk* as its argument, no longer a block_device*. Thus, bdev->bd_disk
is now used to pass the expected data.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15060
This change was introduced in Linux commit
7ba150834b840f6f5cdd07ca69a4ccf39df59a66
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15059
Make the version here match that elsewhere in the kernel and system
headers.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#15058
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
As it turns out having autotrim default to 'on' on FreeBSD never really
worked due to mess with defines where userland and kernel module were
getting different default values (userland was defaulting to 'off',
module was thinking it's 'on').
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes#15079
My analysis in PR #14716 was incorrect. Each histogram bucket contains
the number of incorrect bits, by position in a 64-bit word, over the
entire record. 8-bit buckets can overflow for record sizes above 2k.
To forestall that, saturate each bucket at 255. That should still get
the point across: either all bits are equally wrong, or just a couple
are.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes#15049
Unlike regular receive, raw receive require destination to have the
same block structure as the source. In case of dnode reclaim this
triggers two special cases, requiring special handling:
- If dn_nlevels == 1, we can change the ibs, but dnode_set_blksz()
should not dirty the data buffer if block size does not change, or
durign receive dbuf_dirty_lightweight() will trigger assertion.
- If dn_nlevels > 1, we just can't change the ibs, dnode_set_blksz()
would fail and receive_object would trigger assertion, so we should
destroy and recreate the dnode from scratch.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15039
(cherry picked from commit c4e8742149)
Since we are already iterating the ZAP, we have exact string key to
remove, we do not need to call zap_remove_int() with the int key we
just converted, we can call zap_remove() for the original string.
This should make no functional change, only a micro-optimization.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15056
(cherry picked from commit fdba8cbb79)
It seems 9c5167d19f "Project Quota on ZFS" missed to add prefetch
for DMU_PROJECTUSED_OBJECT during scan (scrub/resilver). It should
not cause visible problems, but may affect scub/resilver performance.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15024
Starting approximately from version 1302506 vn_lock_pair() grown two
additional arguments following head. There is a one week hole, but
that is closet reference point we have.
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15047
2023-07-20 08:58:29 -07:00
515 changed files with 19512 additions and 4825 deletions
AM_CPPFLAGS_NOCHECK += -D"__xpg_basename(...)=__xpg_basename(__VA_ARGS__) __attribute__((deprecated(\"basename(3) is underspecified. Use zfs_basename() instead!\")))"
AM_CPPFLAGS_NOCHECK += -D"basename(...)=basename(__VA_ARGS__) __attribute__((deprecated(\"basename(3) is underspecified. Use zfs_basename() instead!\")))"
AM_CPPFLAGS_NOCHECK += -D"dirname(...)=dirname(__VA_ARGS__) __attribute__((deprecated(\"dirname(3) is underspecified. Use zfs_dirnamelen() instead!\")))"
AM_CPPFLAGS_NOCHECK += -D"bcopy(...)=__attribute__((deprecated(\"bcopy(3) is deprecated. Use memcpy(3)/memmove(3) instead!\"))) bcopy(__VA_ARGS__)"
AM_CPPFLAGS_NOCHECK += -D"bcmp(...)=__attribute__((deprecated(\"bcmp(3) is deprecated. Use memcmp(3) instead!\"))) bcmp(__VA_ARGS__)"
AM_CPPFLAGS_NOCHECK += -D"bzero(...)=__attribute__((deprecated(\"bzero(3) is deprecated. Use memset(3) instead!\"))) bzero(__VA_ARGS__)"
Tony Hutter
Alexander Motin
Chunwei Chen
Rob Norris
Mark Johnston
Martin Wagner
Rob N
Martin Matuška
Brooks Davis
Daniel Berlin
a1ea321
George Amanakis
chenqiuhao1997
Alan Somers
Brian Behlendorf
Don Brady
George Wilson
Ameer Hamza
Dag-Erling Smørgrav
Todd
Seth Troisi
Tino Reichardt
Andrew Turner
Jason Lee
Maxim Filimonov
Pavel Snajdr
Alek P
Paul Dagnelie
Robert Evans
Cameron Harr
Benda Xu
Shengqi Chen
Umer Saleem
Fabian-Gruenbichler
Robert Evans
Bi11
Dex Wood
the-Chain-Warden-thresh
Cameron Harr
Mauricio Faria de Oliveira
Chris Davidson
Andrew Innes
Richard Yao
Val Packett
Lalufu
youzhongyang
Benjamin Sherman
Stefan Lendl
Mark Johnston
Rich Ercolani
Pawel Jakub Dawidek
Kevin Jin
chrisperedun
oromenahar
Alan Somers
rmacklem
Jaron Kent-Dobias
AllKind
Akash B
Low-power
MigeljanImeri
Coleman Kane
shodanshok
Thomas Bertschinger
ofthesun9
VaibhavB
dennisfriedrichsen
Olivier Certner
Colin Percival
John Wren Kennedy
Jason King
Sam James
siv0
Martin Matuška
Andrew Turner
Stoiko Ivanov
Mateusz Guzik
наб
Laura Hild
ednadolski-ix
Andrea Righi
Brian Atkinson
Volker Mauel
Dimitry Andric
Serapheim Dimitropoulos
Rafael Kitover
Ryan Lahfa
Mateusz Piotrowski
Zach Dykstra
Yuri Pankov
Wojciech Małota-Wójcik