When an IO fails then zio_vdev_io_done() can call vdev_probe()
to determine the health of the vdev. This is safe as long as
the original zio was submitted with zio_wait() and holds the
SCL_STATE_ALL lock over the operation.
If zio_no_wait() was used then the done callback will submit
the probe IO outside the SCL_STATE_ALL lock and hit this
ASSERT in zio_create()
ASSERT(!vd || spa_config_held(spa, SCL_STATE_ALL, RW_READER));
Resolve the issue by only allowing vdev_probe() to be called
when there's a waiter indicating the caller is using zio_wait().
This assumes that caller is still holding SCL_STATE_ALL.
This issue isn't MMP specific but was surfaced when testing.
Without this patch it can be reproduced by running:
zpool set multihost on <pool>
zinject -d <vdev> -e io -T write -f 50 <pool> -L uber
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#745Closes#6279
Add multihost=on|off pool property to control MMP. When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp. Property defaults to off.
During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock. Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".
Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval. The period is specified in milliseconds. The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.
Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path. Abbreviated
output below.
$ cat /proc/spl/kstat/zfs/mypool/multihost
31 0 0x01 10 880 105092382393521 105144180101111
txg timestamp mmp_delay vdev_guid vdev_label vdev_path
20468 261337 250274925 68396651780 3 /dev/sda
20468 261339 252023374 6267402363293 1 /dev/sdc
20468 261340 252000858 6698080955233 1 /dev/sdx
20468 261341 251980635 783892869810 2 /dev/sdy
20468 261342 253385953 8923255792467 3 /dev/sdd
20468 261344 253336622 042125143176 0 /dev/sdab
20468 261345 253310522 1200778101278 2 /dev/sde
20468 261346 253286429 0950576198362 2 /dev/sdt
20468 261347 253261545 96209817917 3 /dev/sds
20468 261349 253238188 8555725937673 3 /dev/sdb
Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.
When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test. For example, the
pool is exported to run zdb and then imported again. Add a new ztest
function, "-M", to alter ztest behavior to prevent this.
Add new tests to verify the new functionality. Tests provided by
Giuseppe Di Natale.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#745Closes#6279
If no spl_hostid was set, and no /etc/hostid file existed, the user
and kernel would have different values for the hostid.
The kernel's would be 0. User space's would depend on the libc
implementation. On systems with glibc, it would be a generated value,
probably the first 4 bytes of an IP address (see man 3 gethostid and
comments above hostid_read in SPL for details).
This then causes the hostid stored in the labels and in the pool
config not to match the hostid userspace obtains from
get_system_hostid().
Since the kernel has no way to know the libc's generated hostid value,
it serves no purpose for ZFS to use the value.
This patch changes user space's get_system_hostid() to conform to the
kernel's method, first checking for the spl_hostid via sysfs, and then
reading from /etc/hostid directly.
It does not look up spl_hostid_path, because if that is set and the
file it pointed to exists, spl_hostid will reflect its contents.
It eliminates the call to libc's gethostid().
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#745Closes#6279
Authored by: Dave Eddy <dave@daveeddy.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Joshua M. Clulow <jmc@joyent.com>
Reviewed by: Josh Wilsdon <jwilsdon@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Alan Somers <asomers@gmail.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6939
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce1577bCloses#6328
When VERIFY3_IMPL() was adjusted in 682ce104, the values of
the operands were omitted from the variadic arguments list.
This patch simply corrects this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6343
The volmode property may be set to control the visibility of ZVOL
block devices.
This allow switching ZVOL between three modes:
full - existing fully functional behaviour (default)
dev - hide partitions on ZVOL block devices
none - not exposing volumes outside ZFS
Additionally the new zvol_volmode module parameter can be used to
control the default behaviour.
This functionality can be used, for instance, on "backup" pools to
avoid cluttering /dev with unneeded zd* devices.
Original-patch-by: mav <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
FreeBSD-commit: https://github.com/freebsd/freebsd/commit/dd28e6bbCloses#1796Closes#3438Closes#6233
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
* All hunks unrelated to ZFS were dropped.
OpenZFS-issue: https://www.illumos.org/issues/5428
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4585130Closes#6326
fe46eeb introduced non-zero exit codes to test-runner.
A non-zero exit code should be returned when test-runner
decided to kill a test and mark it as KILLED.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6325
Commands should be eval()ed if they involve a shell redirection,
otherwise we end up writing log_* functions messages to the output.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6300Closes#6323
The sync thread is concurrently modifying dn_phys->dn_nlevels
while dbuf_dirty() is trying to assert something about it, without
holding the necessary lock. We need to move this assertion further down
in the function, after we have acquired the dn_struct_rwlock.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8126
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0ef125dCloses#6314
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8067
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085Closes#6319
Call dpkg-shlibdeps with arguments excluding the Debianized packages
lib{uutil1,nvpair1,zfs2,zpool2}linux from the auto-generated
dependencies of generated .debs. A shim dh_shlibdeps that calls the
real dh_shlibdeps with corresponding arguments is installed into a
temporary directory, which is in turn pre-pended to the PATH for the
alien call, working around alien's inability to directly alter the
dependencies of its output debs. Resolves#6106.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#6309Closes#6106
Illumos 4080 inadvertently allows 'zpool clear' on readonly pools: fix
this by reintroducing a check (POOL_CHECK_READONLY) in zfs_ioc_clear
registration code.
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6306
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.
This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#6167
On the single core machine the system may hang when the
spa_namespare_lock acquisition fails in the zvol_first_open
function. It returns -ERESTARTSYS error what causes the
endless loop in __blkdev_get function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes#6283Closes#6312
Needed for PATH variable to be passed into su. The
posix* tests were fixed, but they need further investigation
before they can be enabled.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#6303
Musl libc's <stdio.h> doesn't include <stdarg.h>, which cause
`va_start` and `va_end` end up being undefined symbols.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Leorize <alaviss@users.noreply.github.com>
Closes#6310
Clang doesn't support `/` as comment in assembly, this patch replaces
them with `#`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Leorize <alaviss@users.noreply.github.com>
Closes#6311
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The problem is that zfs_get_data() supplies a stale zgd_bp to
dmu_sync(), which we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it
copies db_blkptr to zgd_bp, dbuf_write_ready() could change
db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale BP and that the dbuf it not dirty,
so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after
acquiring the db_mtx. We could still see a stale db_blkptr,
but if it is stale then the dirty record will still exist and
thus we won't attempt to nopwrite.
OpenZFS-issue: https://www.illumos.org/issues/8378
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3127742Closes#6293
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The existing kernel-side code only provides a method to rollback to a
latest snapshot, whatever it happens to be at the time when the rollback
is actually done. That could be unsafe or confusing in environments
where concurrent DSL changes are possible as the resulting state could
correspond to a newer or older snapshot than the originally requested
one.
This change allows to amend that method such that the rollback is
performed only when the latest snapshot has a specific name. That is,
if a new snapshot is concurrently created or the target snapshot is
destroyed, then no rollback is done and EXDEV error is returned.
New libzfs_core function lzc_rollback_to() is provided for the new
functionality. libzfs is changed to use lzc_rollback_to() to implement
zfs rollback command.
Perhaps we should return different errors to distinguish the case where
the desired snapshot exists but it's not the latest snapshot and the
case where the desired snapshot does not exist.
OpenZFS-issue: https://www.illumos.org/issues/7600
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3d645ebCloses#6292
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7910
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cb6af4bCloses#6291
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#6298
Right now test runner will always exit(0).
It's helpful to have zfs-tests.sh provide different
exit values depending on if everything passed or not.
We can then use common shell cmds to run tests until failure.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#6285
Reorder operations in _endlog so failure messages get
printed prior to performing callbacks and cleanup. This
helps clarify why a test failed and places the message
closer to the point of incident in the resulting logs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6281
Authored by: Sowrabha Gopal <sowrabha.gopal@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
dir_is_empty_readdir() immediately returns if fdopendir() fails.
We should close dirfd when that happens.
OpenZFS-issue: https://www.illumos.org/issues/8430
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e165e20Closes#6289
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The problem is that when dsl_bookmark_destroy_check() is
executed from open context (the pre-check), it fills in
dbda_success based on the existence of the bookmark. But
the bookmark (or containing filesystem as in this case)
can be destroyed before we get to syncing context. When
we re-run dsl_bookmark_destroy_check() in syncing context,
it will not add the deleted bookmark to dbda_success,
intending for dsl_bookmark_destroy_sync() to not process
it. But because the bookmark is still in dbda_success from
the open-context call, we do try to destroy it.
The fix is that dsl_bookmark_destroy_check() should not
modify dbda_success when called from open context.
OpenZFS-issue: https://www.illumos.org/issues/8377
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b0b6fe3Closes#6286
Resolves issues discovered when porting to OpenZFS.
* Lint warnings.
* Made dnode_move_impl() large dnode aware. This
functionality is currently unused on Linux.
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#6262
Make zfs_arc_meta_limit_percent and zfs_arc_dnode_limit_percent behave
as you would expect from zfs-module-parameters.5.
- recalculate arc_meta_limit if zfs_arc_meta_limit_percent changes
- recalculate arc_dnode_limit if zfs_arc_dnode_limit_percent changes
- correctly set arc_meta_limit and arc_dnode_limit if zfs_arc_max or
zfs_arc_meta_min changes
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#6269
* Fixed some typos
* Additional description for some commands arguments
* Text reworked to be in sync with OpenZFS
* Added Linux as .Os type
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6282
GCC 7.1 with will warn when we're not checking the snprintf()
return code in cases where the buffer could be truncated. This
patch either checks the snprintf return code (where applicable),
or simply disables the warnings (ztest.c).
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6253
* Fixed some typos
* Additional description for some commands arguments
* `listsnapshots` remained
* Text reworked to be in sync with OpenZFS
* Added Linux as .Os type
* Updated `zpool events` section.
* Updated `zpool iostat|status -c` sections
* Added zed(8) reference to SEE ALSO
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#6245
On RHEL 7.4, include/linux/bio.h now includes a macro for
bio_set_op_attrs that conflicts with the ifndef in ZFS
include/linux/blkdev_compat.h. This patch fixes the build.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6234Closes#6271
Commit 8542ef8 allowed optional IOs to be aggregated beyond
the specified aggregation limit. Since the aggregation limit
was also used to enforce the maximum block size, setting
`zfs_vdev_aggregation_limit=16777216` could result in an
attempt to allocate an ABD larger than 16M.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6259Closes#6270
Under Linux the existence of a block device in /etc/fstab is
not sufficient to prevent the use of the force flag. Without
the force flag a warning will be printed that the device has
a filesystem of a given type. Providing the force option
will overwrite that filesystem as long as it is not actively
mounted.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Tested-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes#6267Closes#6272
Use zv_state_lock to protect all members of zvol_state structure, add
relevant ASSERT()s. Take zv_suspend_lock before zv_state_lock, do not
hold zv_state_lock across suspend/resume.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes#6226
In bqueue_dequeue(), call cv_signal() with bq_lock held.
Re-enable rsend_009_pos to test the fix.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes#5887
Authored by: Andrew Stormont <astormont@racktopsystems.com>
Reviewed by: Marcel Telka <marcel@telka.sk>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8331
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4f4378cCloses#6255
This prints dashes instead of zeros for zero latency values in
'zpool iostat -p'. You'll get zero latencies reported when the
disk is idle, but technically a zero latency is invalid, since you
can't measure the latency of doing nothing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6210
In zfs/dmu_object and icp/core/kcf_sched, the CPU_SEQID macro
should be surrounded by `kpreempt_disable` and `kpreempt_enable`
calls to avoid a Linux kernel BUG warning. These code paths use
the cpuid to minimize lock contention and is is safe to reschedule
the process to a different processor at any time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Morgan Jones <me@numin.it>
Closes#6239
In the original form of device error injection, it was an all or nothing
situation. To help simulate intermittent error conditions, you can now
specify a real number percentage value. This is also very useful for our
ZFS fault diagnosis testing and for injecting intermittent errors during
load testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#6227
Add links for information about the ZFS buildbot options
to the contributing guidelines and PR template.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6235
Use queue_flag_set_unlocked() in zvol_alloc().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Issue #6226
Brian Behlendorf
Olaf Faaland
Dave Eddy
Tom Caputi
LOLi
Yuri Pankov
Giuseppe Di Natale
Matthew Ahrens
Antonio Russo
Alek P
Arkadiusz Bubała
George Melikov
alaviss
Andriy Gapon
Marcel Telka
Sowrabha Gopal
chrisrd
Tony Hutter
bunder2015
Boris Protopopov
Boris Protopopov
Andrew Stormont
Morgan Jones
Don Brady