Commit Graph

1417 Commits

Author SHA1 Message Date
Gregor Kopka 63a77ae3cf Added column definitions to arcstat.py
grow: ARC Grow enabled (!arc_no_grow)
free: ARC Free memory (arc_sys_free)
need: ARC Reclaim need (arc_need_free)

Fixed alignment issues (mread had wrong width).

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregor Kopka <gregor@kopka.net>
Closes #8058
2018-10-29 18:18:20 -05:00
Brian Behlendorf bea7578356
ZTS: Fix auto_replace_001_pos test
The root cause of these failures is that udev can notify the
ZED of newly created partition before its links are created.
Handle this by allowing an auto-replace to briefly wait until
udev confirms the links exist.

Distill this test case down to its essentials so it can be run
reliably.  What we need to check is that:

  1) A new disk, in the same physical location, is automatically
     brought online when added to the system,
  2) It completes the replacement process, and
  3) The pool is now ONLINE and healthy.

There is no need to remove the scsi_debug module.  After exporting
the pool the disk can be zeroed, removed, and then re-added to the
system as a new disk.

Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8051
2018-10-29 15:05:14 -05:00
Brian Behlendorf b74f48fe1b
Fix flake8 "invalid escape sequence 'x'" warning
From, https://lintlyci.github.io/Flake8Rules/rules/W605.html

As of Python 3.6, a backslash-character pair that is not a valid
escape sequence now generates a DeprecationWarning. Although this
will eventually become a SyntaxError, that will not be for several
Python releases.

Note 'float_pobj' was simply removed from arcstat.py since it
was entirely unused.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8056
2018-10-24 23:26:08 -07:00
Tom Caputi 7d658d29cf Fix waiting in ztest_device_removal()
spa->spa_vdev_removal is created in a sync task that is initiated
via dsl_sync_task_nowait(). Since the task may not run before
spa_vdev_remove() returns, we must wait at least 1 txg to ensure
that the removal struct has been created.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8010
2018-10-24 14:37:35 -07:00
Tom Caputi 4a7eb69a5a Fix ztest deadman panic with indirect vdev damage
This patch fixes an issue where ztest's deadman thread would
trigger a panic because reconstructing artifically damaged
blocks would take too long to reconstruct. This patch simply
limits how often ztest inflicts split-block damage and how
many segments it can damage when it does.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8010
2018-10-24 14:37:31 -07:00
Tom Caputi ab4c009e3d Fix dbgmsg printing in ztest and zdb
This patch resolves a problem where the -G option in both zdb and
ztest would cause the code to call __dprintf() to print zfs_dbgmsg
output. This function was not properly wired to add messages to the
dbgmsg log as it is in userspace and so the messages were simply
dropped. This patch also tries to add some degree of distinction to
dprintf() (which now prints directly to stdout) and zfs_dbgmsg()
(which adds messages to an internal list that can be dumped with
zfs_dbgmsg_print()).

In addition, this patch corrects an issue where ztest used a global
variable to decide whether to dump the dbgmsg buffer on a crash.
This did not work because ztest spins up more instances of itself
using execv(), which did not copy the global variable to the new
process. The option has been moved to the ztest_shared_opts_t
which already exists for interprocess communication.

This patch also changes zfs_dbgmsg_print() to use write() calls
instead of printf() so that it will not fail when used in a signal
handler.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8010
2018-10-24 14:36:50 -07:00
Tom Caputi 9410257800 Fix random ztest_deadman_thread failures
The zloop test has been failing in buildbot for the last few weeks
with various failures in ztest_deadman_thread(). This is due to the
fact that this thread is not stopped when performing pool import /
export tests as it should be. This patch simply corrects this.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8010
2018-10-24 14:36:21 -07:00
Serapheim Dimitropoulos 9b2266e3d8 OpenZFS 9682 - page fault in dsl_async_clone_destroy() while opening pool
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/9682
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ade2c82828
Closes #8037
2018-10-19 12:06:21 -07:00
Matthew Ahrens d637db98e1 OpenZFS 9681 - ztest failure in spa_history_log_internal due to spa_rename()
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/9681
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6aee0ad7
Closes #8041
2018-10-19 12:02:28 -07:00
Tom Caputi 80a91e7469 Defer new resilvers until the current one ends
Currently, if a resilver is triggered for any reason while an
existing one is running, zfs will immediately restart the existing
resilver from the beginning to include the new drive. This causes
problems for system administrators when a drive fails while another
is already resilvering. In this case, the optimal thing to do to
reduce risk of data loss is to wait for the current resilver to end
before immediately replacing the second failed drive, which allows
the system to operate with two incomplete drives for the minimum
amount of time.

This patch introduces the resilver_defer feature that essentially
does this for the admin without forcing them to wait and monitor
the resilver manually. The change requires an on-disk feature
since we must mark drives that are part of a deferred resilver in
the vdev config to ensure that we do not assume they are done
resilvering when an existing resilver completes.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: @mmaybee 
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7732
2018-10-18 21:06:18 -07:00
LOLi 2e55034471 zpool: allow sharing of spare device among pools
ZFS allows, by default, sharing of spare devices among different pools;
this commit simply restores this functionality for disk devices and
adds an additional tests case to the ZFS Test Suite to prevent future
regression.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7999
2018-10-17 11:21:07 -07:00
Paul Dagnelie d52d80b700 Add types to featureflags in zfs
The boolean featureflags in use thus far in ZFS are extremely useful,
but because they take advantage of the zap layer, more interesting data
than just a true/false value can be stored in a featureflag. In redacted
send/receive, this is used to store the list of redaction snapshots for
a redacted dataset.

This change adds the ability for ZFS to store types other than a boolean
in a featureflag. The only other implemented type is a uint64_t array.
It also modifies the interfaces around dataset features to accomodate
the new capabilities, and adds a few new functions to increase
encapsulation.

This functionality will be used by the Redacted Send/Receive feature.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7981
2018-10-16 11:15:04 -07:00
Matthew Ahrens 0aa5916a30
OpenZFS 9847 - leaking dd_clones (DMU_OT_DSL_CLONES) objects (#7979)
OpenZFS 9847 - leaking dd_clones (DMU_OT_DSL_CLONES) objects

We're leaking the dd_clones objects in dsl_dir_destroy_sync.  This bug
appears to have been around forever.  Thankfully the amount of space
typically involved is tiny.

In addition this adds a mechanism in ZDB to find objects in the MOS
which are leaked (not referenced anywhere).

Porting notes:
* Added dd_crypto_obj to ZDB MOS object leak tracking

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>

OpenZFS-issue: https://illumos.org/issues/9847
Closes #7979
2018-10-12 11:28:26 -07:00
Brian Behlendorf 27f80e85c2 Improved error handling for extreme rewinds
The vdev_checkpoint_sm_object(), vdev_obsolete_sm_object(), and
vdev_obsolete_counts_are_precise() functions assume that the
only way a zap_lookup() can fail is if the requested entry is
missing.  While this is the most common cause, it's not the only
cause.  Attemping to access a damaged ZAP will result in other
errors.

The most likely scenario for accessing a damaged ZAP is during
an extreme rewind pool import.  Under these conditions the pool
is expected to contain damaged objects and the import code was
updated to handle this gracefully.  Getting an ECKSUM error from
these ZAPs after the pool in import a far less likely, therefore
the behavior for call paths was not modified.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7809
Closes #7921
2018-10-12 11:24:04 -07:00
Matt Ahrens 5d43cc9a59 OpenZFS 9689 - zfs range lock code should not be zpl-specific
The ZFS range locking code in zfs_rlock.c/h depends on ZPL-specific
data structures, specifically znode_t.  However, it's also used by
the ZVOL code, which uses a "dummy" znode_t to pass to the range
locking code.

We should clean this up so that the range locking code is generic
and can be used equally by ZPL and ZVOL, and also can be used by
future consumers that may need to run in userland (libzpool) as
well as the kernel.

Porting notes:
* Added missing sys/avl.h include to sys/zfs_rlock.h.
* Removed 'dbuf is within the locked range' ASSERTs from dmu_sync().
  This was needed because ztest does not yet use a locked_range_t.
* Removed "Approved by:" tag requirement from OpenZFS commit
  check to prevent needless warnings when integrating changes
  which has not been merged to illumos.
* Reverted free_list range lock changes which were originally
  needed to defer the cv_destroy() which was called immediately
  after cv_broadcast().  With d2733258 this should be safe but
  if not we may need to reintroduce this logic.
* Reverts: The following two commits were reverted and squashed in
  to this change in order to make it easier to apply OpenZFS 9689.
  - d88895a0, which removed the dummy znode from zvol_state
  - e3a07cd0, which updated ztest to use range locks
* Preserved optimized rangelock comparison function.  Preserved the
  rangelock free list.  The cv_destroy() function will block waiting
  for all processes in cv_wait() to be scheduled and drop their
  reference.  This is done to ensure it's safe to free the condition
  variable.  However, blocking while holding the rl->rl_lock mutex
  can result in a deadlock on Linux.  A free list is introduced to
  defer the cv_destroy() and kmem_free() until after the mutex is
  released.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9689
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/680
External-issue: DLPX-58662
Closes #7980
2018-10-11 10:19:33 -07:00
Tony Hutter 2ef0f8c329 Print "(repairing)" in zpool status again
Historically, zpool status prints "(repairing)" for any drives that
have errors during a scrub:

        NAME            STATE     READ WRITE CKSUM
        mypool          ONLINE       0     0     0
          mirror-0      ONLINE       0     0     0
            /tmp/file1  ONLINE      13     0     0  (repairing)
            /tmp/file2  ONLINE       0     0     0
            /tmp/file3  ONLINE       0     0     0

This was accidentally broken in "OpenZFS 9166 - zfs storage pool
checkpoint" (d2734cc).  This patch adds it back in.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7779
Closes #7978
2018-10-09 20:30:32 -07:00
Tom Caputi 52ce99dd61 Refcounted DSL Crypto Key Mappings
Since native ZFS encryption was merged, we have been fighting
against a series of bugs that come down to the same problem: Key
mappings (which must be present during all I/O operations) are
created and destroyed based on dataset ownership, but I/Os can
have traditionally been allowed to "leak" into the next txg after
the dataset is disowned.

In the past we have attempted to solve this problem by trying to
ensure that datasets are disowned ater all I/O is finished by
calling txg_wait_synced(), but we have repeatedly found edge cases
that need to be squashed and code paths that might incur a high
number of txg syncs. This patch attempts to resolve this issue
differently, by adding a reference to the key mapping for each txg
it is dirtied in. By doing so, we can remove many of the
unnecessary calls to txg_wait_synced() we have added in the past
and ensure we don't need to deal with this problem in the future.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7949
2018-10-03 09:47:11 -07:00
Tim Schumacher 424fd7c3e0 Prefix all refcount functions with zfs_
Recent changes in the Linux kernel made it necessary to prefix
the refcount_add() function with zfs_ due to a name collision.

To bring the other functions in line with that and to avoid future
collisions, prefix the other refcount functions as well.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Closes #7963
2018-10-01 10:42:05 -07:00
Brian Behlendorf 1258bd778e
Refine split block reconstruction
Due to a flaw in 4589f3ae the number of unique combinations
could be calculated incorrectly.  This could result in the
random combinations reconstruction being used when it would
have been possible to check all combinations.

This change fixes the unique combinations calculation and
simplifies the reconstruction logic by maintaining a per-
segment list of unique copies.

The vdev_indirect_splits_damage() function was introduced
to validate both the enumeration and random reconstruction
logic with ztest.  It is implemented such it will never
make a known recoverable block unrecoverable.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #6900 
Closes #7934
2018-10-01 10:36:34 -07:00
Tim Schumacher c13060e478 Linux 4.19-rc3+ compat: Remove refcount_t compat
torvalds/linux@59b57717f ("blkcg: delay blkg destruction until
after writeback has finished") added a refcount_t to the blkcg
structure. Due to the refcount_t compatibility code, zfs_refcount_t
was used by mistake.

Resolve this by removing the compatibility code and replacing the
occurrences of refcount_t with zfs_refcount_t.

Reviewed-by: Franz Pletz <fpletz@fnordicwalking.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Closes #7885 
Closes #7932
2018-09-26 10:29:26 -07:00
Gregor Kopka b954e36e51 Zpool iostat: remove latency/queue scaling
Bandwidth and iops are average per second while *_wait are averages
per request for latency or, for queue depths, an instantaneous
measurement at the end of an interval (according to man zpool).

When calculating the first two it makes sense to do
x/interval_duration (x being the increase in total bytes or number of
requests over the duration of the interval, interval_duration in
seconds) to 'scale' from amount/interval_duration to amount/second.

But applying the same math for the latter (*_wait latencies/queue) is
wrong as there is no interval_duration component in the values (these
are time/requests to get to average_time/request or already an
absulute number).

This bug leads to the only correct continuous *_wait figures for both
latencies and queue depths from 'zpool iostat -l/q' being with
duration=1 as then the wrong math cancels itself (x/1 is a nop).

This removes temporal scaling from latency and queue depth figures.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregor Kopka <gregor@kopka.net>
Closes #7945 
Closes #7694
2018-09-25 16:29:16 -07:00
LOLi e0b7ff46c9 zstreamdump dumps core printing truncated nvlist
This change prevents zstreamdump from crashing when trying to print
invalid nvlist data (DRR_BEGIN record) from a truncated send stream.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7917
2018-09-18 09:43:09 -07:00
LOLi 5140a58f3b zpool should detect invalid fs property on create
This change improve the handling of invalid filesystem properties when
specified at pool creation: this is useful when 'zpool create -n'
(dry run) is executed to detect invalid fs-level options (-O) before
the actual command is run.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7620 
Closes #7878
2018-09-13 13:37:42 -07:00
LOLi 0238a9755b Fix 'zfs allow' for create time permissions
When no permission set is defined for a dataset the create time
permissions are incorrectly shown as if they were a permission set.
This change simply correct how allow permissions are displayed.

This commit also fixes a small manpage formatting issue and adds the
"zfs_allow_003_pos" test case to the ZFS Test Suite.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7519 
Closes #7860
2018-09-06 13:11:21 -07:00
Don Brady cc99f275a2 Pool allocation classes
Allocation Classes add the ability to have allocation classes in a
pool that are dedicated to serving specific block categories, such
as DDT data, metadata, and small file blocks. A pool can opt-in to
this feature by adding a 'special' or 'dedup' top-level VDEV.

Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Reviewed-by: Andreas Dilger <andreas.dilger@chamcloud.com>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Gregor Kopka <gregor@kopka.net>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #5182
2018-09-05 18:33:36 -07:00
Don Brady b83a0e2dc1 Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).

Programmatically document, via a zfs_ioc_key_t, the valid arguments 
for the ioc commands that rely on nvpair input arguments (i.e. non 
legacy commands from libzfs_core). Automatically verify the expected 
pairs before dispatching a command.

This initial phase focuses on the non-legacy ioctls. A follow-on 
change can address the legacy ioctl input from the zfs_cmd_t.

The zfs_ioc_key_t for zfs_keys_channel_program looks like:

static const zfs_ioc_key_t zfs_keys_channel_program[] = {
       {"program",     DATA_TYPE_STRING,               0},
       {"arg",         DATA_TYPE_UNKNOWN,              0},
       {"sync",        DATA_TYPE_BOOLEAN_VALUE,        ZK_OPTIONAL},
       {"instrlimit",  DATA_TYPE_UINT64,               ZK_OPTIONAL},
       {"memlimit",    DATA_TYPE_UINT64,               ZK_OPTIONAL},
};

Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE, 
EBADF, and E2BIG).

ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 12:14:01 -07:00
bernie1995 0fe7c953b3 ZTS: path cleanup
Removing hardcoded paths in many scripts.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bernie1995 <bernie.pikes@gmail.com>
Issue #7507 
Closes #7843
2018-08-30 13:46:55 -07:00
Tom Caputi c3bd3fb4ac OpenZFS 9403 - assertion failed in arc_buf_destroy()
Assertion failed in arc_buf_destroy() when concurrently reading
block with checksum error.

Porting notes:
* The ability to zinject decompression errors has been added, but
  this only works at the zio_decompress() level, where we have all
  of the info we need to match against the user's zinject options.
* The decompress_fault test has been added to test the new zinject
  functionality
* We attempted to set zio_decompress_fail_fraction to (1 << 18) in
  ztest for further test coverage. Although this did uncover a few
  low priority issues, this unfortuantely also causes ztest to
  ASSERT in many locations where the code is working correctly since
  it is designed to fail on IO errors. Developers can manually set
  this variable with the '-o' option to find and debug issues.

Authored by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Tom Caputi <tcaputi@datto.com>

OpenZFS-issue: https://illumos.org/issues/9403
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/fa98e487a9
Closes #7822
2018-08-29 11:33:33 -07:00
Rich Ercolani e8a8208eef Added metadata/dnode cache info to arc_summary
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #7815
2018-08-22 09:35:20 -07:00
Olaf Faaland 34fe773e30 Skip import activity test in more zdb code paths
Since zdb opens the pools read-only, it cannot damage the pool in the
event the pool is already imported either on the same host or on
another one.

If the pool vdev structure is changing while zdb is importing the
pool, it may cause zdb to crash.  However this is unlikely, and in any
case it's a user space process and can simply be run again.

For this reason, zdb should disable the multihost activity test on
import that is normally run.

This commit fixes a few zdb code paths where that had been overlooked.
It also adds tests to ensure that several common use cases handle this
properly in the future.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gu Zheng <guzheng2331314@163.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7797 
Closes #7801
2018-08-20 10:05:23 -07:00
DeHackEd edc05fdb34 Don't modify argv[] in user tools
argv[] gets modified during string parsing for input arguments. This
is reflected in the live process listing. Don't do that.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes #7760
2018-08-20 09:55:18 -07:00
LOLi a9d6270acb 'zfs holds' scripted mode is not documented
This change simply documents the existing "scripted mode" option in
both command help and man page.

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7798
2018-08-18 15:47:41 -07:00
LOLi 1f87313ac8 Fix arcstat.py handling of unsupported options
This change allows the arcstat.py script to handle unsupported options
gracefully and print both error and usage messages when one such option
is provided.

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7799
2018-08-18 13:10:36 -07:00
Olaf Faaland 5200237711 MMP should not suspend pool in ztest
When running ztest, never suspend the pool due to failed or delayed
MMP writes.

There are many sources of long delays within ztest, such as device
opens, closes, etc. which in combination, may delay MMP writes too
long and cause MMP to suspend the pool.

Some of these delays also affect real pools, and should be fixed.
That is being worked separately.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7776
2018-08-13 08:12:25 -07:00
Nathan Lewis 010d12474c Add support for selecting encryption backend
- Add two new module parameters to icp (icp_aes_impl, icp_gcm_impl)
  that control the crypto implementation.  At the moment there is a
  choice between generic and aesni (on platforms that support it).
- This enables support for AES-NI and PCLMULQDQ-NI on AMD Family
  15h (bulldozer) and newer CPUs (zen).
- Modify aes_key_t to track what implementation it was generated
  with as key schedules generated with various implementations
  are not necessarily interchangable.

Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Nathaniel R. Lewis <linux.robotdude@gmail.com>
Closes #7102 
Closes #7103
2018-08-02 11:59:24 -07:00
Serapheim Dimitropoulos 6b64382b17 OpenZFS 9580 - Add a hash-table on top of nvlist to speed-up operations
= Motivation

While dealing with another performance issue (see 126118f) we noticed
that we spend a lot of time in various places in the kernel when
constructing long nvlists. The problem is that when an nvlist is created
with the NV_UNIQUE_NAME set (which is the case most of the time), we do
a linear search through the whole list to ensure uniqueness for every
entry we add.

An example of the above scenario can be seen in the following
flamegraph, where more than have the time of the zfsdev_ioctl() is spent
on constructing nvlists.  Flamegraph:
https://sdimitro.github.io/img/flame/sdimitro_snap_unmount3.svg

Adding a table to speed up lookups will help situations where we just
construct an nvlist (like the scenario above), in addition to regular
lookups and removals.

= What this patch does

In this diff we've implemented a hash-table on top of the nvlist code
that converts most nvlist operations from O(# number of entries) to
O(1)* (the start is for amortized time as the hash-table grows and
shrinks depending on the # of entries - plain lookup is strictly O(1)).

= Performance Analysis

To analyze the performance improvement I just used the setup from the
snapshot deletion issue mentioned above in the Motivation section.
Basically I created 10K filesystems with one snapshot each and then I
just used the API of libZFS_Core to pass down an nvlist of all the
snapshots to have them deleted. The reason I used my own driver program
was to have clean performance results of what actually happens in the
kernel. The flamegraphs and wall clock times mentioned below were
gathered from the start to the end of the driver program's run. Between
trials the testpool used was completely destroyed, the system was
rebooted and the testpool was completely recreated. The reason for this
dance was to get consistent results.

== Results (before patch):

=== Sampling Flamegraphs

[Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A.svg
[Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2.svg
[Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3.svg

=== Wall clock times (in seconds)

```
[Trial 4]
real        5.3
user        0.4
sys         2.3

[Trial 5]
real        8.2
user        0.4
sys         2.4

[Trial 6]
real        6.0
user        0.5
sys         2.3
```

== Results (after patch):

=== Sampling Flamegraphs

[Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-Ae.svg
[Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2e.svg
[Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3e.svg

=== Wall clock times (in seconds)

```
[Trial 4]
real        4.9
user        0.0
sys         0.9

[Trial 5]
real        3.8
user        0.0
sys         0.9

[Trial 6]
real        3.6
user        0.0
sys         0.9
```

== Analysis

The results between the trials are consistent so in this sections I will
only talk about the flamegraph results from trial-1 and the wall-clock
results from trial-4.

From trial-1 we can see that zfs_dev_ioctl() goes from 2,331 to 996
samples counts.  Specifically, the samples from fnvlist_add_nvlist() and
spa_history_log_nvl() are almost gone (~500 & ~800 to 5 & 5 samples),
leaving zfs_ioc_destroy_snaps() to dominate most samples from
zfs_dev_ioctl().

From trial-4 we see that the user time dropped to 0 secods. I believe
the consistent 0.4 seconds before my patch was applied was due to my
driver program constructing the long nvlist of snapshots so it can pass
it to the kernel. As for the system time, the effect there is more clear
(2.3 down to 0.9 seconds).

Porting Notes:
* DATA_TYPE_DONTCARE case added to switch in fm_nvprintr() and
  zpool_do_events_nvprint().

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/9580
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b5eca7b1
Closes #7748
2018-07-30 11:30:03 -07:00
Brian Behlendorf d441e85dd7
Add support for autoexpand property
While the autoexpand property may seem like a small feature it
depends on a significant amount of system infrastructure.  Enough
of that infrastructure is now in place that with a few modifications
for Linux it can be supported.

Auto-expand works as follows; when a block device is modified
(re-sized, closed after being open r/w, etc) a change uevent is
generated for udev.  The ZED, which is monitoring udev events,
passes the change event along to zfs_deliver_dle() if the disk
or partition contains a zfs_member as identified by blkid.

From here the device is matched against all imported pool vdevs
using the vdev_guid which was read from the label by blkid.  If
a match is found the ZED reopens the pool vdev.  This re-opening
is important because it allows the vdev to be briefly closed so
the disk partition table can be re-read.  Otherwise, it wouldn't
be possible to report the maximum possible expansion size.

Finally, if the property autoexpand=on a vdev expansion will be
attempted.  After performing some sanity checks on the disk to
verify that it is safe to expand,  the primary partition (-part1)
will be expanded and the partition table updated.  The partition
is then re-opened (again) to detect the updated size which allows
the new capacity to be used.

In order to make all of the above possible the following changes
were required:

* Updated the zpool_expand_001_pos and zpool_expand_003_pos tests.
  These tests now create a pool which is layered on a loopback,
  scsi_debug, and file vdev.  This allows for testing of non-
  partitioned block device (loopback), a partition block device
  (scsi_debug), and a file which does not receive udev change
  events.  This provided for better test coverage, and by removing
  the layering on ZFS volumes there issues surrounding layering
  one pool on another are avoided.

* zpool_find_vdev_by_physpath() updated to accept a vdev guid.
  This allows for matching by guid rather than path which is a
  more reliable way for the ZED to reference a vdev.

* Fixed zfs_zevent_wait() signal handling which could result
  in the ZED spinning when a signal was not handled.

* Removed vdev_disk_rrpart() functionality which can be abandoned
  in favor of kernel provided blkdev_reread_part() function.

* Added a rwlock which is held as a writer while a disk is being
  reopened.  This is important to prevent errors from occurring
  for any configuration related IOs which bypass the SCL_ZIO lock.
  The zpool_reopen_007_pos.ksh test case was added to verify IO
  error are never observed when reopening.  This is not expected
  to impact IO performance.

Additional fixes which aren't critical but were discovered and
resolved in the course of developing this functionality.

* Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for
  ZFS volumes.  This is as good as a unique physical path, while the
  volumes are not used in the test cases anymore for other reasons
  this improvement was included.

Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #120
Closes #2437
Closes #5771
Closes #7366
Closes #7582
Closes #7629
2018-07-23 15:40:15 -07:00
Brian Behlendorf e2cc448b60
Reduce zdb output when pool contains checkpoint
When running zdb without additional arguments against a pool containing
a checkpoint the entire checkpoint spacemap should not be dumped.  Make
this behavior conditional upon passing the -mmmm option as described in
the zdb(8) man page.

     -mmmm   Display every spacemap record.

Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7702
2018-07-10 21:23:17 -07:00
Troels Nørgaard 94370f5955 Default ashift for Amazon EC2 NVMe devices
Add a default 4 KiB ashift for Amazon EC2 NVMe devices on instances with
NVMe ephemeral devices, such as the types c5d, f1, i3 and m5d.
As per the official documentation [1] a 4096 byte blocksize should be
used to match the underlying hardware.

The string was identified via:

$ sudo sginfo -M /dev/nvme0n1
INQUIRY response (cmd: 0x12)
----------------------------
Device Type                        0
Vendor:                    NVMe
Product:                   Amazon EC2 NVMe
Revision level:

$ lsblk -io KNAME,TYPE,SIZE,MODEL
KNAME   TYPE    SIZE MODEL
nvme0n1 disk  442.4G Amazon EC2 NVMe Instance Storage

[1] https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/
    storage-optimized-instances.html
    Retrived 2018-07-03

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Troels Nørgaard <tnn@tradeshift.com>
Closes #7676
2018-07-06 16:15:19 -07:00
Serapheim Dimitropoulos 4d044c4c1d OpenZFS 9238 - ZFS Spacemap Encoding V2
Motivation
==========

The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
    This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
    device removal, zpool checkpoint) we've started imposing limits in the
    vdevs that can be used with them based on the maximum addressable offset
    (currently 64PB for a top-level vdev).

New encoding
============

The layout can be found at space_map.h and it remains backwards compatible with
the old one. The introduced two-word entry format, besides extending the limits
imposed by the single-entry layout, also includes a vdev field and some extra
padding after its prefix.

The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps (expected to be used in the log spacemap project).

One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and we wanted to fit the vdev field
in the space map. In addition that gives us some extra bits in dva_t.

Other references:
=================

The new encoding is also discussed towards the end of the Log Space Map
presentation from 2017's OpenZFS summit.
Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d
OpenZFS-issue: https://www.illumos.org/issues/9238
Closes #7665
2018-07-05 12:02:34 -07:00
Low-power aebfb84851 Fix missing option '-e' in zpool online usage
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: WHR <msl0000023508@gmail.com>
Closes #7655
2018-06-26 10:17:55 -07:00
Serapheim Dimitropoulos d2734cce68 OpenZFS 9166 - zfs storage pool checkpoint
Details about the motivation of this feature and its usage can
be found in this blogpost:

    https://sdimitro.github.io/post/zpool-checkpoint/

A lightning talk of this feature can be found here:
https://www.youtube.com/watch?v=fPQA8K40jAM

Implementation details can be found in big block comment of
spa_checkpoint.c

Side-changes that are relevant to this commit but not explained
elsewhere:

* renames members of "struct metaslab trees to be shorter without
  losing meaning

* space_map_{alloc,truncate}() accept a block size as a
  parameter. The reason is that in the current state all space
  maps that we allocate through the DMU use a global tunable
  (space_map_blksz) which defauls to 4KB. This is ok for metaslab
  space maps in terms of bandwirdth since they are scattered all
  over the disk. But for other space maps this default is probably
  not what we want. Examples are device removal's vdev_obsolete_sm
  or vdev_chedkpoint_sm from this review. Both of these have a
  1:1 relationship with each vdev and could benefit from a bigger
  block size.

Porting notes:

* The part of dsl_scan_sync() which handles async destroys has
  been moved into the new dsl_process_async_destroys() function.

* Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write
  to block device backed pools.

* ZTS:
  * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg".

  * Don't use large dd block sizes on /dev/urandom under Linux in
    checkpoint_capacity.

  * Adopt Delphix-OS's setting of 4 (spa_asize_inflation =
    SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed
    its attempts to fill the pool

  * Create the base and nested pools with sync=disabled to speed up
    the "setup" phase.

  * Clear labels in test pool between checkpoint tests to avoid
    duplicate pool issues.

  * The import_rewind_device_replaced test has been marked as "known
    to fail" for the reasons listed in its DISCLAIMER.

  * New module parameters:

      zfs_spa_discard_memory_limit,
      zfs_remove_max_bytes_pause (not documented - debugging only)
      vdev_max_ms_count (formerly metaslabs_per_vdev)
      vdev_min_ms_count

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9166
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8
Closes #7570
2018-06-26 10:07:42 -07:00
kpande aeb39df726 Fix typo in comment, handeling->handling
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: Kash Pande <kash@tripleback.net>
Closes #7641
2018-06-18 21:51:06 -07:00
John Gallagher 917f475fba Add tunables for channel programs
This patch adds tunables for modifying the maximum memory limit and
maximum instruction limit that can be specified when running a channel
program.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
External-issue: LX-1085
Closes #7618
2018-06-15 15:10:42 -07:00
Brian Behlendorf c91cf36fc2
Fix ztest_vdev_add_remove() test case
Commit 2ffd89fc allowed two new errors to be reported by zil_reset()
in order to provide a descriptive error message regarding why a log
device could not be removed.  However, the new return values were
not handled in the ztest_vdev_add_remove() test case resulting in
ztest failures during automated testing.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7630
2018-06-14 09:41:27 -07:00
Antonio Russo 39042f9736 Tunable directory for zfs runtime scripts
zpool and zed place scripts in subdirectories of libexecdir. Some
distributions locate architecture independent scripts in other locations
(e.g. Debian). To avoid these paths getting out of sync, centralize the
definitions.

Build zfs-test's default.cfg by Makefile.  Use the new directory
logic building tests/zfs-tests/include/default.cfg.in.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #7597
2018-06-07 09:59:59 -07:00
Alek P 6969afcefd Always continue recursive destroy after error
Currently, during a recursive zfs destroy the first error that is
encountered will stop the destruction of the datasets. Errors may
happen for a variety of reasons including competing deletions
and busy datasets.
This patch switches recursive destroy to always do a best-effort
recursive dataset destroy.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #7574
2018-06-06 10:14:52 -07:00
Tony Hutter f0ed6c7448 Add pool state /proc entry, "SUSPENDED" pools
1. Add a proc entry to display the pool's state:

$ cat /proc/spl/kstat/zfs/tank/state
ONLINE

This is done without using the spa config locks, so it will
never hang.

2. Fix 'zpool status' and 'zpool list -o health' output to print
"SUSPENDED" instead of "ONLINE" for suspended pools.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7331 
Closes #7563
2018-06-06 09:33:54 -07:00
Brian Behlendorf 2d9142c9d4
Remove rwlock wrappers
The only remaining consumer of the rwlock compatibility wrappers
is ztest.  Remove the wrappers and convert the few remaining
calls to the underlying pthread functions.

    rwlock_init()    -> pthread_rwlock_init()
    rwlock_destroy() -> pthread_rwlock_destroy()
    rw_rdlock()      -> pthread_rwlock_rdlock()
    rw_wrlock()      -> pthread_rwlock_wrlock()
    rw_unlock()      -> pthread_rwlock_unlock()

Note pthread_rwlock_init() defaults to PTHREAD_PROCESS_PRIVATE
which is equivilant to the USYNC_THREAD behavior.  There is no
functional change.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7591
2018-06-04 16:52:10 -07:00
Pavel Zakharov 8a393be353 OpenZFS 9235 - rename zpool_rewind_policy_t to zpool_load_policy_t
We want to be able to pass various settings during import/open of a
pool, which are not only related to rewind. Instead of adding a new
policy and duplicate a bunch of code, we should just rename
rewind_policy to a more generic term like load_policy.

For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we
want those flags not only for the import case, but also for the open
case. One such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb)
which would allow zfs to open a pool when logs are missing.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9235
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d2b1e44
Closes #7532
2018-06-04 14:54:20 -07:00
Brian Behlendorf 93ce2b4ca5 Update build system and packaging
Minimal changes required to integrate the SPL sources in to the
ZFS repository build infrastructure and packaging.

Build system and packaging:
  * Renamed SPL_* autoconf m4 macros to ZFS_*.
  * Removed redundant SPL_* autoconf m4 macros.
  * Updated the RPM spec files to remove SPL package dependency.
  * The zfs package obsoletes the spl package, and the zfs-kmod
    package obsoletes the spl-kmod package.
  * The zfs-kmod-devel* packages were updated to add compatibility
    symlinks under /usr/src/spl-x.y.z until all dependent packages
    can be updated.  They will be removed in a future release.
  * Updated copy-builtin script for in-kernel builds.
  * Updated DKMS package to include the spl.ko.
  * Updated stale AUTHORS file to include all contributors.
  * Updated stale COPYRIGHT and included the SPL as an exception.
  * Renamed README.markdown to README.md
  * Renamed OPENSOLARIS.LICENSE to LICENSE.
  * Renamed DISCLAIMER to NOTICE.

Required code changes:
  * Removed redundant HAVE_SPL macro.
  * Removed _BOOT from nvpairs since it doesn't apply for Linux.
  * Initial header cleanup (removal of empty headers, refactoring).
  * Remove SPL repository clone/build from zimport.sh.
  * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due
    to build issues when forcing C99 compilation.
  * Replaced legacy ACCESS_ONCE with READ_ONCE.
  * Include needed headers for `current` and `EXPORT_SYMBOL`.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes #7556
2018-05-29 16:00:33 -07:00
Jorgen Lundman 561ba8d1b1 OpenZFS 9523 - Large alloc in zdb can cause trouble
16MB alloc in zdb_embedded_block() can cause cores in certain
situations (clang, gcc55).

Authored by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
* Replaces an equivalent fix previously made for Linux.

OpenZFS-issue: https://illumos.org/issues/9523
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2c1964a
Closes #7561
2018-05-25 17:24:57 -07:00
Antonio Russo 68fded8146 Add canonical mount options zfs-mount-generator
lib/libzfs/libzfs_mount.c:zfs_add_options provides the canonical
mount options used by a `zfs mount` command. Because we cannot call
`zfs mount` directly from a systemd.mount unit, we mirror that logic
in zfs-mount-generator.

The zed script is updated to cache these properties as well.

Include a mini-tutorial in the manual page, properly substitute
configuration paths in zfs-mount-generator.8.in, and standardize the
Makefile.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #7453
2018-05-11 12:44:14 -07:00
Pavel Zakharov 6cb8e5306d OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:

	7638 Refactor spa_load_impl into several functions
	8961 SPA load/import should tell us why it failed
	7277 zdb should be able to print zfs_dbgmsg's

To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.

The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.

The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.

When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.

This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.

With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
of data, this feature is for now restricted to a read-only import.

Porting notes (ZTS):
* Fix 'make dist' target in zpool_import

* The maximum path length allowed by tar is 99 characters.  Several
  of the new test cases exceeded this limit resulting in them not
  being included in the tarball.  Shorten the names slightly.

* Set/get tunables using accessor functions.

* Get last synced txg via the "zfs_txg_history" mechanism.

* Clear zinject handlers in cleanup for import_cache_device_replaced
  and import_rewind_device_replaced in order that the zpool can be
  exported if there is an error.

* Increase FILESIZE to 8G in zfs-test.sh to allow for a larger
  ext4 file system to be created on ZFS_DISK2.  Also, there's
  no need to partition ZFS_DISK2 at all.  The partitioning had
  already been disabled for multipath devices.  Among other things,
  the partitioning steals some space from the ext4 file system,
  makes it difficult to accurately calculate the paramters to
  parted and can make some of the tests fail.

* Increase FS_SIZE and FILE_SIZE in the zpool_import test
  configuration now that FILESIZE is larger.

* Write more data in order that device evacuation take lonnger in
  a couple tests.

* Use mkdir -p to avoid errors when the directory already exists.

* Remove use of sudo in import_rewind_config_changed.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9075
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123
Closes #7459
2018-05-08 21:35:27 -07:00
Pavel Zakharov afd2f7b711 OpenZFS 8962 - zdb should work on non-idle pools
Currently `zdb` consistently fails to examine non-idle pools as it
fails during the `spa_load()` process. The main problem seems to be
that `spa_load_verify()` fails as can be seen below:

    $ sudo zdb -d -G dcenter
    zdb: can't open 'dcenter': I/O error

    ZFS_DBGMSG(zdb):
    spa_open_common: opening dcenter
    spa_load(dcenter): LOADING
    disk vdev '/dev/dsk/c4t11d0s0': best uberblock found for spa dcenter. txg 40824950
    spa_load(dcenter): using uberblock with txg=40824950
    spa_load(dcenter): UNLOADING
    spa_load(dcenter): RELOADING
    spa_load(dcenter): LOADING
    disk vdev '/dev/dsk/c3t10d0s0': best uberblock found for spa dcenter. txg 40824952
    spa_load(dcenter): using uberblock with txg=40824952
    spa_load(dcenter): FAILED: spa_load_verify failed [error=5]
    spa_load(dcenter): UNLOADING

This change makes `spa_load_verify()` a dryrun when ran from
`zdb`. This is done by creating a global flag in zfs and then setting
it in `zdb`.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/8962
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/180ad792
Closes #7459
2018-05-08 21:32:57 -07:00
Paul Dagnelie 64c1dcefe3 OpenZFS 9421, 9422 - zdb show possibly leaked objects
9421 zdb should detect and print out the number of "leaked" objects
9422 zfs diff and zdb should explicitly mark objects that are on
     the deleted queue

It is possible for zfs to "leak" objects in such a way that they are not
freed, but are also not accessible via the POSIX interface. As the only
way to know that this is happened is to see one of them directly in a
zdb run, or by noting unaccounted space usage, zdb should be enhanced to
count these objects and return failure if some are detected.

We have access to the delete queue through the zfs_get_deleteq function;
we should call it in dump_znode to determine if the object is on the
delete queue. This is not the most efficient possible method, but it is
the simplest to implement, and should suffice for the common case where
there few objects on the delete queue.

Also zfs diff and zdb currently traverse every single dnode in a dataset
and tries to figure out the path of the object by following it's parent.
When an object is placed on the delete queue, for all practical purposes
it's already discarded, it's parent might not exist anymore, and another
object might now have the object number that belonged to the parent.
While all of the above makes sense, when trying to figure out the path
of an object that is on the delete queue, we can run into issues where
either it is impossible to determine the path because the parent is
gone, or another dnode has taken it's place and thus we are returned a
wrong path.

We should therefore avoid trying to determine the path of an object on
the delete queue and mark the object itself as being on the delete queue
to avoid confusion. To achieve this, we currently have two ideas:

1. When putting an object on the delete queue, change it's parent object
   number to a known constant that means NULL.

2. When displaying objects, first check if it is present on the delete
   queue.

Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9421
OpenZFS-issue: https://illumos.org/issues/9422
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca
Closes #7500
2018-05-04 10:50:24 -07:00
Tom Caputi be9a5c355c Add support for decryption faults in zinject
This patch adds the ability for zinject to trigger decryption
and authentication faults in the ZIO and ARC layers. This
functionality is exposed via the new "decrypt" error type, which
may be provided for "data" object types.

This patch also refactors some of the core encryption / decryption
functions so that they have consistent prototypes, handle errors
consistently, and do not have unused arguments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7474
2018-05-02 15:36:20 -07:00
Matthew Ahrens 964c2d69a9 OpenZFS 9236 - nuke spa_dbgmsg
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and
rare enough to always log. It's possible that the message in
zio_dva_allocate() would be too high-frequency for zfs_dbgmsg.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Patch Notes:
* Removed ZFS_DEBUG_SPA from zfs-module-parameters.5

OpenZFS-issue: https://www.illumos.org/issues/9236
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cfaba7f668
Closes #7467
2018-04-30 10:19:48 -07:00
LOLi b4555c777a Fix 'zfs remap <poolname@snapname>'
Only filesystems and volumes are valid 'zfs remap' parameters: when
passed a snapshot name zfs_remap_indirects() does not handle the
EINVAL returned from libzfs_core, which results in failing an assertion
and consequently crashing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7454
2018-04-19 09:45:17 -07:00
Tom Caputi b0ee5946aa Fix issues with raw sends of spill blocks
This patch fixes 2 issues in how spill blocks are processed during
raw sends. The first problem is that compressed spill blocks were
using the logical length rather than the physical length to
determine how much data to dump into the send stream. The second
issue is a typo that caused the spill record's object number to be
used where the objset's ID number was required. Both issues have
been corrected, and the payload_size is now printed in zstreamdump
for future debugging.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7378 
Closes #7432
2018-04-17 11:19:03 -07:00
Matt Ahrens d830d4795a OpenZFS 9280 - Assertion failure while running removal_with_ganging test with 4K devices
Authored by: Matt Ahrens <Matt.Ahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/9280
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/243952c
Closes #7445
2018-04-17 10:44:50 -07:00
Brian Behlendorf 4589f3ae4c Optimize possible split block search space
Remove duplicate segment copies to minimize the possible search
space for reconstruction.  Once reduced an accurate assessment can
be made regarding the difficulty in reconstructing the block.

Also, ztest will now run zdb with
zfs_reconstruct_indirect_combinations_max set to 1000000 in an attempt
to avoid checksum errors.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6900
2018-04-14 12:22:43 -07:00
Matthew Ahrens 9e052db462 OpenZFS 9290 - device removal reduces redundancy of mirrors
Mirrors are supposed to provide redundancy in the face of whole-disk
failure and silent damage (e.g. some data on disk is not right, but ZFS
hasn't detected the whole device as being broken). However, the current
device removal implementation bypasses some of the mirror's redundancy.
Note that in no case is incorrect data returned, but we might get a
checksum error when we should have been able to find the right data.

There are two underlying problems:

1. When we remove a mirror device, we only read one side of the mirror.
Since we can't verify the checksum, this side may be silently bad, but
the good data is on the other side of the mirror (which we didn't read).
This can cause the removal to "bake in" the busted data – all copies of
the data in the new location are the same, busted version, while we left
the good version behind.

The fix for this is to read and copy both sides of the mirror. If the
old and new vdevs are mirrors, we will read both sides of the old
mirror, and write each copy to the corresponding side of the new mirror.
(If the old and new vdevs have a different number of children, we will
do this as best as possible.) Even though we aren't verifying checksums,
this ensures that as long as there's a good copy of the data, we'll have
a good copy after the removal, even if there's silent damage to one side
of the mirror. If we're removing a mirror that has some silent damage,
we'll have exactly the same damage in the new location (assuming that
the new location is also a mirror).

2. When we read from an indirect vdev that points to a mirror vdev, we
only consider one copy of the data. This can lead to reduced effective
redundancy, because we might read a bad copy of the data from one side
of the mirror, and not retry the other, good side of the mirror.

Note that the problem is not with the removal process, but rather after
the removal has completed (having copied correct data to both sides of
the mirror), if one side of the new mirror is silently damaged, we
encounter the problem when reading the relocated data via the indirect
vdev. Also note that the problem doesn't occur when ZFS knows that one
side of the mirror is bad, e.g. when a disk entirely fails or is
offlined.

The impact is that reads (from indirect vdevs that point to mirrors) may
return a checksum error even though the good data exists on one side of
the mirror, and scrub doesn't repair all data on the mirror (if some of
it is pointed to via an indirect vdev).

The fix for this is complicated by "split blocks" - one logical block
may be split into two (or more) pieces with each piece moved to a
different new location. In this case we need to read all versions of
each split (one from each side of the mirror), and figure out which
combination of versions results in the correct checksum, and then repair
the incorrect versions.

This ensures that we supply the same redundancy whether you use device
removal or not. For example, if a mirror has small silent errors on all
of its children, we can still reconstruct the correct data, as long as
those errors are at sufficiently-separated offsets (specifically,
separated by the largest block size - default of 128KB, but up to 16MB).

Porting notes:

* A new indirect vdev check was moved from dsl_scan_needs_resilver_cb()
  to dsl_scan_needs_resilver(), which was added to ZoL as part of the
  sequential scrub work.

* Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t
  parameter.  The extra parameter is unique to ZoL.

* When posting indirect checksum errors the ABD can be passed directly,
  zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9290
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591
Closes #6900
2018-04-14 12:21:39 -07:00
Matthew Ahrens a1d477c24c OpenZFS 7614, 9064 - zfs device evacuation/removal
OpenZFS 7614 - zfs device evacuation/removal
OpenZFS 9064 - remove_mirror should wait for device removal to complete

This project allows top-level vdevs to be removed from the storage pool
with "zpool remove", reducing the total amount of storage in the pool.
This operation copies all allocated regions of the device to be removed
onto other devices, recording the mapping from old to new location.
After the removal is complete, read and free operations to the removed
(now "indirect") vdev must be remapped and performed at the new location
on disk.  The indirect mapping table is kept in memory whenever the pool
is loaded, so there is minimal performance overhead when doing operations
on the indirect vdev.

The size of the in-memory mapping table will be reduced when its entries
become "obsolete" because they are no longer used by any block pointers
in the pool.  An entry becomes obsolete when all the blocks that use
it are freed.  An entry can also become obsolete when all the snapshots
that reference it are deleted, and the block pointers that reference it
have been "remapped" in all filesystems/zvols (and clones).  Whenever an
indirect block is written, all the block pointers in it will be "remapped"
to their new (concrete) locations if possible.  This process can be
accelerated by using the "zfs remap" command to proactively rewrite all
indirect blocks that reference indirect (removed) vdevs.

Note that when a device is removed, we do not verify the checksum of
the data that is copied.  This makes the process much faster, but if it
were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be
possible to copy the wrong data, when we have the correct data on e.g.
the other side of the mirror.

At the moment, only mirrors and simple top-level vdevs can be removed
and no removal is allowed if any of the top-level vdevs are raidz.

Porting Notes:

* Avoid zero-sized kmem_alloc() in vdev_compact_children().

    The device evacuation code adds a dependency that
    vdev_compact_children() be able to properly empty the vdev_child
    array by setting it to NULL and zeroing vdev_children.  Under Linux,
    kmem_alloc() and related functions return a sentinel pointer rather
    than NULL for zero-sized allocations.

* Remove comment regarding "mpt" driver where zfs_remove_max_segment
  is initialized to SPA_MAXBLOCKSIZE.

  Change zfs_condense_indirect_commit_entry_delay_ticks to
  zfs_condense_indirect_commit_entry_delay_ms for consistency with
  most other tunables in which delays are specified in ms.

* ZTS changes:

    Use set_tunable rather than mdb
    Use zpool sync as appropriate
    Use sync_pool instead of sync
    Kill jobs during test_removal_with_operation to allow unmount/export
    Don't add non-disk names such as "mirror" or "raidz" to $DISKS
    Use $TEST_BASE_DIR instead of /tmp
    Increase HZ from 100 to 1000 which is more common on Linux

    removal_multiple_indirection.ksh
        Reduce iterations in order to not time out on the code
        coverage builders.

    removal_resume_export:
        Functionally, the test case is correct but there exists a race
        where the kernel thread hasn't been fully started yet and is
        not visible.  Wait for up to 1 second for the removal thread
        to be started before giving up on it.  Also, increase the
        amount of data copied in order that the removal not finish
        before the export has a chance to fail.

* MMP compatibility, the concept of concrete versus non-concrete devices
  has slightly changed the semantics of vdev_writeable().  Update
  mmp_random_leaf_impl() accordingly.

* Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool
  feature which is not supported by OpenZFS.

* Added support for new vdev removal tracepoints.

* Test cases removal_with_zdb and removal_condense_export have been
  intentionally disabled.  When run manually they pass as intended,
  but when running in the automated test environment they produce
  unreliable results on the latest Fedora release.

  They may work better once the upstream pool import refectoring is
  merged into ZoL at which point they will be re-enabled.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Reece <alex@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://www.illumos.org/issues/7614
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb
Closes #6900
2018-04-14 12:16:17 -07:00
Antonio Russo 55d80e651a systemd mount generator and tracking ZEDLET
zfs-mount-generator implements the "systemd generator" protocol,
producing systemd.mount units from the cached outputs of zfs list,
during early boot, integrating with systemd.

Each pool has an indpendent cache of the command

  zfs list -H -oname,mountpoint,canmount -tfilesystem -r $pool

which is kept synchronized by the ZEDLET

  history_event-zfs-list-cacher.sh

Datasets not in the cache will be loaded later in the boot process by
zfs-mount.service, including pools without a cache.

Among other things, this allows for complex mount hierarchies.

Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #7329
2018-04-06 14:11:09 -07:00
Tom Caputi 1bf9a552bb Make encrypted "zfs mount -a" failures consistent
Currently, "zfs mount -a" will print a warning and fail to mount
any encrypted datasets that do not have a key loaded. This patch
makes the behavior of this failure consistent with other failure
modes ("zfs mount -a" will silently continue, explict "zfs mount"
will print a message and return an error code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7382
2018-04-06 13:28:15 -07:00
Tony Hutter 21a4f5cc86 Fedora 28: Fix misc bounds check compiler warnings
Fix a bunch of (mostly) sprintf/snprintf truncation compiler
warnings that show up on Fedora 28 (GCC 8.0.1).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7361 
Closes #7368
2018-04-04 10:16:47 -07:00
Alek P 272b5d730f Add JSON output support to channel programs
The changes piggyback JSON output support on top of channel programs 
(#6558).  This way the JSON output support is targeted to scripting 
use cases and is easily maintainable since it really only touches 
one function (zfs_do_channel_program()).

This patch ports Joyent's JSON nvlist library from illumos to enable 
easy JSON printing of channel program output nvlist.  To keep the 
delta small I also took advantage of the fact that printing in
zfs_do_channel_program() was almost always done before exiting 
the program.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #7281
2018-03-19 12:40:58 -07:00
Olaf Faaland cec3a0a1bb Report pool suspended due to MMP
When the pool is suspended, record whether it was due to an I/O error or
due to MMP writes failing to succeed within the required time.

Change spa_suspended from uint8_t to zio_suspend_reason_t to store the
reason.

When userspace queries pool status via spa_tryimport(), report the
reason the pool was suspended in a new key,
ZPOOL_CONFIG_SUSPENDED_REASON.

In libzfs, when interpreting the returned config nvlist, report
suspension due to MMP with a new pool status enum value,
ZPOOL_STATUS_IO_FAILURE_MMP.

In status_callback(), which generates and emits the message when 'zpool
status' is executed, add a case to print an appropriate message for the
new pool status enum value.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7296
2018-03-15 10:56:55 -07:00
Paul Zuchowski 83362e8e67 Destroy makes full snap list before destroying
Change zfs destroy logic so destroying begins before
the entire list of snapshots is built.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #7271
2018-03-12 15:24:08 -07:00
Tomohiro Kusumi 6b8655ad3f Change functions which return literals to return `const char*`
get_format_prompt_string() and zpool_state_to_name() return
a string literal which is read-only, thus they should return
`const char*`.

zpool_get_prop_string() returns a non-const string after
successful nv-lookup, and returns a string literal otherwise.
Since this function is designed to be used for read-only purpose,
the return type should also be `const char*`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes #7285
2018-03-09 13:47:32 -08:00
Tony Hutter 639b18944a Allow to limit zed's syslog chattiness
Some usage patterns like send/recv of replication streams can
produce a large number of events. In such a case, the current
all-syslog.sh zedlet will hold up to its name, and flood the
logs with mostly redundant information. Two mitigate this
situation, this changeset introduces to new variables
ZED_SYSLOG_SUBCLASS_INCLUDE and ZED_SYSLOG_SUBCLASS_EXCLUDE
to zed.rc that give more control over which event classes end
up in the syslog.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Daniel Kobras <d.kobras@science-computing.de>
Closes #6886 
Closes #7260
2018-03-06 15:41:52 -08:00
Nasf-Fan 2705ebf0a7 Misc fixes and cleanup for project quota
1) The Coverity Scan reports some issues for the project
   quota patch, including:

1.1) zfs_prop_get_userquota() directly uses the const quota
   type value as the condition check by wrong.

1.2) dmu_objset_userquota_get_ids() may cause dnode::dn_newgid
   to be overwritten by dnode::dn->dn_oldprojid.

2) This patch fixes related issues. It also enhances the logic
   for zfs_project_item_alloc() to avoid buffer overflow.

3) Skip project quota ability check if does not change project
   quota related things (id or flag). Otherwise, it will cause
   chattr (for other non project quota flags) operation failed
   if project quota disabled.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
Closes #7251 
Closes #7265
2018-03-05 12:56:27 -08:00
John Eismeier d699aaef09 Fix some typos
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: John Eismeier <john.eismeier@gmail.com>
Closes #7237
2018-02-28 08:57:10 -08:00
Scot W. Stevenson 19528cf949 Add Python 3 rewrite of arc_summary.py
Add new script arc_summary3.py as a complete rewrite of the
arc_summary.py tool (see issue #6873)

Add new options:

        -g/--graph    - Display crude graphic representation
                        of ARC status and quit
        -r/--raw      - Print all available information as
                        minimally formatted list (for grep)
        -s/--section  - Print a single section. This
                        replaces -p/--page, which is kept for
                        backwards use but marked as
                        depreciated

Add new sections with information on ZIL and SPL. Notify user
if sections L2ARC and VDEV are skipped instead of failing
silently. Add warning that -p/--page option is depreciated.

Developed for Python 3.5.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6873 
Closes #6892
2018-02-28 08:52:34 -08:00
Tony Hutter 3e9c9d8a89 Add SMART self-test results to zpool status -c
Add in SMART self-test results to zpool status|iostat -c.  This
works for both SAS and SATA drives.

Also, add plumbing to allow the 'smart' script to take smartctl
output from a directory of output text files instead of running
it against the vdevs.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7178
2018-02-27 09:31:27 -08:00
LOLi 4af6873af6 Fix segfault in zfs_do_bookmark()
When invoked with wrong parameters 'zfs bookmark' fails to gracefully
validate user input and crashes.

This is a regression accidentally introduced in 587e228; this commit
adds additional tests to the ZFS Test Suite to exercise this codepath.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: KireinaHoro <i@jsteward.moe>
Signed-off-by:  loli10K <ezomori.nozomu@gmail.com>
Closes #7228 
Closes #7229
2018-02-26 09:55:18 -08:00
Tony Hutter bf95a000c4 Add scrub after resilver zed script
* Add a zed script to kick off a scrub after a resilver.  The script is
disabled by default.

* Add a optional $PATH (-P) option to zed to allow it to use a custom
$PATH for its zedlets.  This is needed when you're running zed under
the ZTS in a local workspace.

* Update test scripts to not copy in all-debug.sh and all-syslog.sh by
default.  They can be optionally copied in as part of zed_setup().
These scripts slow down zed considerably under heavy events loads and
can cause events to be dropped or their delivery delayed. This was
causing some sporadic failures in the 'fault' tests.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #4662 
Closes #7086
2018-02-23 11:38:05 -08:00
bunder2015 ca0b376604 Add SMART attributes for SSD and NVMe
This adds the SMART attributes required to probe Samsung SSD and NVMe
(and possibly others) disks when using the "zpool status -c" command.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7183 
Closes #7193
2018-02-21 13:52:47 -08:00
LOLi faa97c1619 Want 'zfs send -b'
This change implements 'zfs send -b' which can be used to send only
received property values whether or not they are overridden by local
settings.

This can be very useful during "restore" operations from a backup pool
because it allows to send only the property values originally sent
from the backup source, even though they were later modified on the
destination either by a 'zfs set' operation, explicit 'zfs inherit' or
overridden during the receive process via 'zfs receive -o|-x'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7156
2018-02-21 12:32:06 -08:00
Don Brady cbce581353 Fix coverity defects: zfs channel programs
CID 173243, 173245:  Memory - corruptions  (OVERRUN)
 Added size argument to lcompat_sprintf() to avoid use of INT_MAX

CID 173244:  Integer handling issues  (OVERFLOW_BEFORE_WIDEN)
 Added cast to uint64_t to avoid a 32 bit overflow warning

CID 173242:  Integer handling issues  (CONSTANT_EXPRESSION_RESULT)
 Conditionally removed unused luai_numisnan() floating point check

CID 173241:  Resource leaks  (RESOURCE_LEAK)
 Added missing close(fd) on error path

CID 173240:    (UNINIT)
Fixed uninitialized variable in get_special_prop()

CID 147560:  Null pointer dereferences  (NULL_RETURNS)
Cleaned up bad code merge in dsl_dataset_promote_check()

CID 28475:  Memory - illegal accesses  (OVERRUN)
Fixed lcompat_sprintf() to use a size paramater

CID 28418, 28422:  Error handling issues  (CHECKED_RETURN)
Added function result cast to (void) to avoid warning

CID 23935, 28411, 28412:  Memory - corruptions  (ARRAY_VS_SINGLETON)
Added casts to avoid exposing result as an array

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7181
2018-02-20 11:19:42 -08:00
Nasf-Fan 9c5167d19f Project Quota on ZFS
Project quota is a new ZFS system space/object usage accounting
and enforcement mechanism. Similar as user/group quota, project
quota is another dimension of system quota. It bases on the new
object attribute - project ID.

Project ID is a numerical value to indicate to which project an
object belongs. An object only can belong to one project though
you (the object owner or privileged user) can change the object
project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly.
The object also can inherit the project ID from its parent when
created if the parent has the project inherit flag (that can be
set via 'chattr +P' or 'zfs project -s [-p]').

By accounting the spaces/objects belong to the same project, we
can know how many spaces/objects used by the project. And if we
set the upper limit then we can control the spaces/objects that
are consumed by such project. It is useful when multiple groups
and users cooperate for the same project, or a user/group needs
to participate in multiple projects.

Support the following commands and functionalities:

zfs set projectquota@project
zfs set projectobjquota@project

zfs get projectquota@project
zfs get projectobjquota@project
zfs get projectused@project
zfs get projectobjused@project

zfs projectspace

zfs allow projectquota
zfs allow projectobjquota
zfs allow projectused
zfs allow projectobjused

zfs unallow projectquota
zfs unallow projectobjquota
zfs unallow projectused
zfs unallow projectobjused

chattr +/-P
chattr -p project_id
lsattr -p

This patch also supports tree quota based on the project quota via
"zfs project" commands set as following:
zfs project [-d|-r] <file|directory ...>
zfs project -C [-k] [-r] <file|directory ...>
zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
zfs project [-p id] [-r] [-s] <file|directory ...>

For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on
the $DIR, then the proejct [obj]quota and [obj]used values for the
$DIR's project ID will be shown as the total/free (avail) resource.
Keep the same behavior as EXT4/XFS does.

Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by  Ned Bass <bass6@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master"
Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c
Closes #6290
2018-02-13 14:54:54 -08:00
LOLi c03f04708c 'zfs receive' fails with "dataset is busy"
Receiving an incremental stream after an interrupted "zfs receive -s"
fails with the message "dataset is busy": this is because we still have
the hidden clone ../%recv from the resumable receive.

Improve the error message suggesting the existence of a partially
complete resumable stream from "zfs receive -s" which can be either
aborted ("zfs receive -A") or resumed ("zfs send -t").

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7129 
Closes #7154
2018-02-12 12:28:59 -08:00
Chunwei Chen eb9c4532dd Fix zdb -ed on objset for exported pool
zdb -ed on objset for exported pool would failed with:
  failed to own dataset 'qq/fs0': No such file or directory

The reason is that zdb pass objset name to spa_import, it uses that
name to create a spa. Later, when dmu_objset_own tries to lookup the spa
using real pool name, it can't find one.

We fix this by make sure we pass pool name rather than objset name to
spa_import.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7099
Closes #6464
2018-02-09 10:11:34 -08:00
Chunwei Chen 5e3bd0e684 Fix zdb -E segfault
SPA_MAXBLOCKSIZE is too large for stack.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7099
2018-02-09 10:11:19 -08:00
Chunwei Chen 950e17c215 Fix zdb -R decompression
There are some issues in the zdb -R decompression implementation.

The first is that ZLE can easily decompress non-ZLE streams. So we add
ZDB_NO_ZLE env to make zdb skip ZLE.

The second is the random bytes appended to pabd, pbuf2 stuff. This serve
no purpose at all, those bytes shouldn't be read during decompression
anyway. Instead, we randomize lbuf2, so that we can make sure
decompression fill exactly to lsize by bcmp lbuf and lbuf2.

The last one is the condition to detect fail is wrong.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7099
Closes #4984
2018-02-09 10:11:02 -08:00
Chunwei Chen 0c0b0ad48a Fix racy assignment of zcb.zcb_haderrors
zcb_haderrors will be modified in zdb_blkptr_done, which is
asynchronous. So we must move this assignment after zio_wait.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7099
2018-02-09 10:08:40 -08:00
Serapheim Dimitropoulos 5b72a38d68 OpenZFS 8677 - Open-Context Channel Programs
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

We want to be able to run channel programs outside of synching
context. This would greatly improve performance for channel programs
that just gather information, as they won't have to wait for synching
context anymore.

=== What is implemented?

This feature introduces the following:
- A new command line flag in "zfs program" to specify our intention
  to run in open context. (The -n option)
- A new flag/option within the channel program ioctl which selects
  the context.
- Appropriate error handling whenever we try a channel program in
  open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.

=== How do we handle zfs.sync functions in open context?

When such a function is found by the interpreter and we are running
in open context we abort the script and we spit out a descriptive
runtime error. For example, given the script below ...

arg = ...
fs = arg["argv"][1]
err = zfs.sync.destroy(fs)
msg = "destroying " .. fs .. " err=" .. err
return msg

if we run it in open context, we will get back the following error:

Channel program execution failed:
[string "channel program"]:3: running functions from the zfs.sync
submodule requires passing sync=TRUE to lzc_channel_program()
(i.e. do not specify the "-n" command line argument)
stack traceback:
            [C]: in function 'destroy'
            [string "channel program"]:3: in main chunk

=== What about testing?

We've introduced new wrappers for all channel program tests that
run each channel program as both (startard & open-context) and
expect the appropriate behavior depending on the program using
the zfs.sync module.

OpenZFS-issue: https://www.illumos.org/issues/8677
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15
Closes #6558
2018-02-08 16:05:57 -08:00
Chris Williamson d99a015343 OpenZFS 7431 - ZFS Channel Programs
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533

Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
  Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
2018-02-08 15:28:18 -08:00
DeHackEd 0cf3430d2d Fix `zpool status` overflow on fast scrubs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: DHE <git@dehacked.net>
Closes #7133
2018-02-06 16:35:16 -08:00
Brian Behlendorf 60b8207496
Set persistent ztest failure mode
In order to reliably detect deadlocks in the create and import
path ztest should set the failure mode property.  This ensures
that the pool is always using the correct failmode behavior.

Removed insidious use of local variable in MAXFAULTS macro.

Converted VERIFY() to VERIFY0() where appropriate.

Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7111
2018-02-05 12:00:26 -08:00
Tom Caputi 047116ac76 Raw sends must be able to decrease nlevels
Currently, when a raw zfs send file includes a DRR_OBJECT record
that would decrease the number of levels of an existing object,
the object is reallocated with dmu_object_reclaim() which
creates the new dnode using the old object's nlevels. For non-raw
sends this doesn't really matter, but raw sends require that
nlevels on the receive side match that of the send side so that
the checksum-of-MAC tree can be properly maintained. This patch
corrects the issue by freeing the object completely before
allocating it again in this case.

This patch also corrects several issues with dnode_hold_impl()
and related functions that prevented dnodes (particularly
multi-slot dnodes) from being reallocated properly due to
the fact that existing dnodes were not being fully cleaned up
when they were freed.

This patch adds a test to make sure that zfs recv functions
properly with incremental streams containing dnodes of different
sizes.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6821
Closes #6864
2018-02-02 11:43:11 -08:00
Tom Caputi ae76f45cda Encryption Stability and On-Disk Format Fixes
The on-disk format for encrypted datasets protects not only
the encrypted and authenticated blocks themselves, but also
the order and interpretation of these blocks. In order to
make this work while maintaining the ability to do raw
sends, the indirect bps maintain a secure checksum of all
the MACs in the block below it along with a few other
fields that determine how the data is interpreted.

Unfortunately, the current on-disk format erroneously
includes some fields which are not portable and thus cannot
support raw sends. It is not possible to easily work around
this issue due to a separate and much smaller bug which
causes indirect blocks for encrypted dnodes to not be
compressed, which conflicts with the previous bug. In
addition, the current code generates incompatible on-disk
formats on big endian and little endian systems due to an
issue with how block pointers are authenticated. Finally,
raw send streams do not currently include dn_maxblkid when
sending both the metadnode and normal dnodes which are
needed in order to ensure that we are correctly maintaining
the portable objset MAC.

This patch zero's out the offending fields when computing
the bp MAC and ensures that these MACs are always
calculated in little endian order (regardless of the host
system's byte order). This patch also registers an errata
for the old on-disk format, which we detect by adding a
"version" field to newly created DSL Crypto Keys. We allow
datasets without a version (version 0) to only be mounted
for read so that they can easily be migrated. We also now
include dn_maxblkid in raw send streams to ensure the MAC
can be maintained correctly.

This patch also contains minor bug fixes and cleanups.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6845
Closes #6864
Closes #7052
2018-02-02 11:37:16 -08:00
LOLi 63f88c12b4 Fix style issues in man pages and commands help
* Remove 'zfs snap' from zfs help message (OpenZFS sync)
* Update zfs(8) to suggest 'snap' can be used as an alias for 'snapshot'
* Enforce 80 columns limit in help messages
* Remove zfs_disable_dup_eviction from zfs-module-parameters(5)
* Expose zfs_scan_max_ext_gap as a kernel module parameter.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7087
2018-01-29 15:05:03 -08:00
Giuseppe Di Natale 5e021f56d3 Add dbuf hash and dbuf cache kstats
Introduce kstats about the dbuf hash and dbuf cache
to make it easier to inspect state. This should help
with debugging and understanding of these portions
of the codebase.

Correct format of dbuf kstat file.

Introduce a dbc column to dbufs kstat to indicate if
a dbuf is in the dbuf cache.

Introduce field filtering in the dbufstat python script.

Introduce a no header option to the dbufstat python script.

Introduce a test case to test basic mru->mfu list movement
in the ARC.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6906
2018-01-29 10:24:52 -08:00
Brian Behlendorf bb25362553 Prevent zdb(8) from occasionally hanging on I/O
The zdb(8) command may not terminate in the case where the pool
gets suspended and there is a caller in zio_wait() blocking on
an outstanding read I/O that will never complete.  This can in
turn cause ztest(1) to block indefinitely despite the deadman.

Resolve the issue by setting the default failure mode for zdb(8)
to panic.  In user space we always want the command to terminate
when forward progress is no longer possible.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6999
2018-01-25 13:41:51 -08:00
Brian Behlendorf 8fb1ede146 Extend deadman logic
The intent of this patch is extend the existing deadman code
such that it's flexible enough to be used by both ztest and
on production systems.  The proposed changes include:

* Added a new `zfs_deadman_failmode` module option which is
  used to dynamically control the behavior of the deadman.  It's
  loosely modeled after, but independant from, the pool failmode
  property.  It can be set to wait, continue, or panic.

    * wait     - Wait for the "hung" I/O (default)
    * continue - Attempt to recover from a "hung" I/O
    * panic    - Panic the system

* Added a new `zfs_deadman_ziotime_ms` module option which is
  analogous to `zfs_deadman_synctime_ms` except instead of
  applying to a pool TXG sync it applies to zio_wait().  A
  default value of 300s is used to define a "hung" zio.

* The ztest deadman thread has been re-enabled by default,
  aligned with the upstream OpenZFS code, and then extended
  to terminate the process when it takes significantly longer
  to complete than expected.

* The -G option was added to ztest to print the internal debug
  log when a fatal error is encountered.  This same option was
  previously added to zdb in commit fa603f82.  Update zloop.sh
  to unconditionally pass -G to obtain additional debugging.

* The FM_EREPORT_ZFS_DELAY event which was previously posted
  when the deadman detect a "hung" pool has been replaced by
  a new dedicated FM_EREPORT_ZFS_DEADMAN event.

* The proposed recovery logic attempts to restart a "hung"
  zio by calling zio_interrupt() on any outstanding leaf zios.
  We may want to further restrict this to zios in either the
  ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages.
  Calling zio_interrupt() is expected to only be useful for
  cases when an IO has been submitted to the physical device
  but for some reasonable the completion callback hasn't been
  called by the lower layers.  This shouldn't be possible but
  has been observed and may be caused by kernel/driver bugs.

* The 'zfs_deadman_synctime_ms' default value was reduced from
  1000s to 600s.

* Depending on how ztest fails there may be no cache file to
  move.  This should not be considered fatal, collect the logs
  which are available and carry on.

* Add deadman test cases for spa_deadman() and zio_wait().

* Increase default zfs_deadman_checktime_ms to 60s.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6999
2018-01-25 13:40:38 -08:00
Allan Jude 6bc4a2376c OpenZFS 8972 - zfs holds: In scripted mode, do not pad columns with spaces
Authored by: Allan Jude <allanjude@freebsd.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8972
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3aace5c077
Closes #7063
2018-01-19 09:36:17 -08:00
Brian Behlendorf 31864e3d8c
OpenZFS 8652 - Tautological comparisons with ZPROP_INVAL
usr/src/uts/common/sys/fs/zfs.h
	Change ZPROP_INVAL and ZPROP_CONT from macros to enum values.  Clang
	and GCC both prefer to use unsigned ints to store enums.  That was
	causing tautological comparison warnings (and likely eliminating
	error handling code at compile time) whenever a zfs_prop_t or
	zpool_prop_t was compared to ZPROP_INVAL or ZPROP_CONT.  Making the
	error flags be explicity enum values forces the enum types to be
	signed.

	ZPROP_INVAL was also compared against two different enum types.  I
	had to change its name to ZPOOL_PROP_INVAL whenever its compared to
	a zpool_prop_t.  There are still some places where ZPROP_INVAL or
	ZPROP_CONT is compared to a plain int, in code that doesn't know
	whether the int is storing a zfs_prop_t or a zpool_prop_t.

usr/src/uts/common/fs/zfs/spa.c
	s/ZPROP_INVAL/ZPOOL_PROP_INVAL/

Authored by: Alan Somers <asomers@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8652
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c2de80dc74
Closes #7061
2018-01-19 09:22:37 -08:00
Brian Behlendorf 3da3488e63
Fix shellcheck v0.4.6 warnings
Resolve new warnings reported after upgrading to shellcheck
version 0.4.6.  This patch contains no functional changes.

* egrep is non-standard and deprecated. Use grep -E instead. [SC2196]
* Check exit code directly with e.g. 'if mycmd;', not indirectly
  with $?.  [SC2181]  Suppressed.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7040
2018-01-17 10:17:16 -08:00
Brian Behlendorf e1a0850c35
Force ztest to always use /dev/urandom
For ztest, which is solely for testing, using a pseudo random
is entirely reasonable.  Using /dev/urandom ensures the system
entropy pool doesn't get depleted thus stalling the testing.
This is a particular problem when testing in VMs.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7017 
Closes #7036
2018-01-12 09:36:26 -08:00
Brian Behlendorf fed90353d7
Support -fsanitize=address with --enable-asan
When --enable-asan is provided to configure then build all user
space components with fsanitize=address.  For kernel support
use the Linux KASAN feature instead.

https://github.com/google/sanitizers/wiki/AddressSanitizer

When using gcc version 4.8 any test case which intentionally
generates a core dump will fail when using --enable-asan.
The default behavior is to disable core dumps and only newer
versions allow this behavior to be controled at run time with
the ASAN_OPTIONS environment variable.

Additionally, this patch includes some build system cleanup.

* Rules.am updated to set the minimum AM_CFLAGS, AM_CPPFLAGS,
  and AM_LDFLAGS.  Any additional flags should be added on a
  per-Makefile basic.  The --enable-debug and --enable-asan
  options apply to all user space binaries and libraries.

* Compiler checks consolidated in always-compiler-options.m4
  and renamed for consistency.

* -fstack-check compiler flag was removed, this functionality
  is provided by asan when configured with --enable-asan.

* Split DEBUG_CFLAGS in to DEBUG_CFLAGS, DEBUG_CPPFLAGS, and
  DEBUG_LDFLAGS.

* Moved default kernel build flags in to module/Makefile.in and
  split in to ZFS_MODULE_CFLAGS and ZFS_MODULE_CPPFLAGS.  These
  flags are set with the standard ccflags-y kbuild mechanism.

* -Wframe-larger-than checks applied only to binaries or
  libraries which include source files which are built in
  both user space and kernel space.  This restriction is
  relaxed for user space only utilities.

* -Wno-unused-but-set-variable applied only to libzfs and
  libzpool.  The remaining warnings are the result of an
  ASSERT using a variable when is always declared.

* -D_POSIX_PTHREAD_SEMANTICS and -D__EXTENSIONS__ dropped
  because they are Solaris specific and thus not needed.

* Ensure $GDB is defined as gdb by default in zloop.sh.

Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7027
2018-01-10 10:49:27 -08:00
Brian Behlendorf bfe27ace0d Fix unused variable warnings
Resolved unused variable warnings observed after restricting
-Wno-unused-but-set-variable to only libzfs and libzpool.

Reviewed-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6941
2018-01-09 12:28:03 -08:00
Brian Behlendorf 06401e4222 Fix ztest_verify_dnode_bt() test case
In ztest_verify_dnode_bt the ztest_object_lock must be held in
order to safely verify the unused bonus space.

Reviewed-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6941
2018-01-09 12:27:12 -08:00
Nathaniel Wesley Filardo 8b20a9f996 zhack: fix getopt return type
This fixes zhack's command processing on ARM.  On ARM char
is unsigned, and so, in promotion to an int, it will never
compare equal to -1.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu>
Closes #7016
2018-01-09 11:14:45 -08:00
LOLi 390d679acd Fix 'zpool add' handling of nested interior VDEVs
When replacing a faulted device which was previously handled by a spare
multiple levels of nested interior VDEVs will be present in the pool
configuration; the following example illustrates one of the possible
situations:

   NAME                          STATE     READ WRITE CKSUM
   testpool                      DEGRADED     0     0     0
     raidz1-0                    DEGRADED     0     0     0
       spare-0                   DEGRADED     0     0     0
         replacing-0             DEGRADED     0     0     0
           /var/tmp/fault-dev    UNAVAIL      0     0     0  cannot open
           /var/tmp/replace-dev  ONLINE       0     0     0
         /var/tmp/spare-dev1     ONLINE       0     0     0
       /var/tmp/safe-dev         ONLINE       0     0     0
   spares
     /var/tmp/spare-dev1         INUSE     currently in use

This is safe and allowed, but get_replication() needs to handle this
situation gracefully to let zpool add new devices to the pool.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6678 
Closes #6996
2017-12-28 10:15:32 -08:00
Simon Guest 993669a7bf vdev_id: new slot type ses
This extends vdev_id to support a new slot type, ses, for SCSI Enclosure
Services.  With slot type ses, the disk slot numbers are determined by
using the device slot number reported by sg_ses for the device with
matching SAS address, found by querying all available enclosures.

This is primarily of use on systems with a deficient driver omitting
support for bay_identifier in /sys/devices.  In my testing, I found that
the existing slot types of port and id were not stable across disk
replacement, so an alternative was required.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Simon Guest <simon.guest@tesujimath.org>
Closes #6956
2017-12-20 09:42:07 -08:00
Giuseppe Di Natale 89a66a0457 Handle broken pipes in arc_summary
Using a command similar to 'arc_summary.py | head' causes
a broken pipe exception. Gracefully exit in the case of a
broken pipe in arc_summary.py.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6965 
Closes #6969
2017-12-19 13:19:24 -08:00
LOLi c4ba46dead Handle invalid options in arc_summary
If an invalid option is provided to arc_summary.py we handle any error
thrown from the getopt Python module and print the usage help message.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6983
2017-12-19 13:02:40 -08:00
LOLi c30e34faa1 ZTS: Fix create-o_ashift test case
The function that fills the uberblock ring buffer on every device label
has been reworked to avoid occasional failures caused by a race
condition that prevents 'zpool sync' from writing some uberblock
sequentially: this happens when the pool sync ioctl dispatch code calls
txg_wait_synced() while we're already waiting for a TXG to sync.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6924 
Closes #6977
2017-12-19 10:49:33 -08:00
LOLi e2d936e0f8 Honor --with-mounthelperdir where applicable
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6962
2017-12-17 14:14:07 -08:00
LOLi 4e9b156960 Various ZED fixes
* Teach ZED to handle spares usingi the configured ashift: if the zpool
   'ashift' property is set then ZED should use its value when kicking
   in a hotspare; with this change 512e disks can be used as spares
   for VDEVs that were created with ashift=9, even if ZFS natively
   detects them as 4K block devices.

 * Introduce an additional auto_spare test case which verifies that in
   the face of multiple device failures an appropiate number of spares
   are kicked in.

 * Fix zed_stop() in "libtest.shlib" which did not correctly wait the
   target pid.

 * Fix ZED crashing on startup caused by a race condition in libzfs
   when used in multi-threaded context.

 * Convert ZED over to using the tpool library which is already present
   in the Illumos FMA code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2562 
Closes #6858
2017-12-08 16:58:41 -08:00
Tony Hutter 674b89342e Fix segfault in zpool iostat when adding VDEVs
Fix a segfault when running 'zpool iostat -v 1' while adding
a VDEV.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6748 
Closes #6872
2017-12-06 11:43:07 -08:00
Prakash Surya 1ce23dcaff OpenZFS 8585 - improve batching done in zil_commit()
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>

Problem
=======

The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:

 1. When there's outstanding ZIL blocks being written (i.e. there's
    already a "writer thread" in progress), then any new calls to
    zil_commit() will block waiting for the currently oustanding ZIL
    blocks to complete. The blocks written for each "writer thread" is
    coined a "batch", and there can only ever be a single "batch" being
    written at a time. When a batch is being written, any new ZIL
    transactions will have to wait for the next batch to be written,
    which won't occur until the current batch finishes.

    As a result, the underlying storage may not be used as efficiently
    as possible. While "new" threads enter zil_commit() and are blocked
    waiting for the next batch, it's possible that the underlying
    storage isn't fully utilized by the current batch of ZIL blocks. In
    that case, it'd be better to allow these new threads to generate
    (and issue) a new ZIL block, such that it could be serviced by the
    underlying storage concurrently with the other ZIL blocks that are
    being serviced.

 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
    to complete, prior to zil_commit() returning. The size of any given
    batch is proportional to the number of ZIL transaction in the queue
    at the time that the batch starts processing the queue; which
    doesn't occur until the previous batch completes. Thus, if there's a
    lot of transactions in the queue, the batch could be composed of
    many ZIL blocks, and each call to zil_commit() will have to wait for
    all of these writes to complete (even if the thread calling
    zil_commit() only cared about one of the transactions in the batch).

To further complicate the situation, these two issues result in the
following side effect:

 3. If a given batch takes longer to complete than normal, this results
    in larger batch sizes, which then take longer to complete and
    further drive up the latency of zil_commit(). This can occur for a
    number of reasons, including (but not limited to): transient changes
    in the workload, and storage latency irregularites.

Solution
========

The solution attempted by this change has the following goals:

 1. no on-disk changes; maintain current on-disk format.
 2. modify the "batch size" to be equal to the "ZIL block size".
 3. allow new batches to be generated and issued to disk, while there's
    already batches being serviced by the disk.
 4. allow zil_commit() to wait for as few ZIL blocks as possible.
 5. use as few ZIL blocks as possible, for the same amount of ZIL
    transactions, without introducing significant latency to any
    individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks.

In theory, with these goals met, the new allgorithm will allow the
following improvements:

 1. new ZIL blocks can be generated and issued, while there's already
    oustanding ZIL blocks being serviced by the storage.
 2. the latency of zil_commit() should be proportional to the underlying
    storage latency, rather than the incoming synchronous workload.

Porting Notes
=============

Due to the changes made in commit 119a394ab0, the lifetime of an itx
structure differs than in OpenZFS. Specifically, the itx structure is
kept around until the data associated with the itx is considered to be
safe on disk; this is so that the itx's callback can be called after the
data is committed to stable storage. Since OpenZFS doesn't have this itx
callback mechanism, it's able to destroy the itx structure immediately
after the itx is committed to an lwb (before the lwb is written to
disk).

To support this difference, and to ensure the itx's callbacks can still
be called after the itx's data is on disk, a few changes had to be made:

  * A list of itxs was added to the lwb structure. This list contains
    all of the itxs that have been committed to the lwb, such that the
    callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(),
    after the data for the itxs is committed to disk.

  * A list of itxs was added on the stack of the zil_process_commit_list()
    function; the "nolwb_itxs" list. In some circumstances, an itx may
    not be committed to an lwb (e.g. if allocating the "next" ZIL block
    on disk fails), so this list is used to keep track of which itxs
    fall into this state, such that their callbacks can be called after
    the ZIL's writer pipeline is "stalled".

  * The logic to actually call the itx's callback was moved into the
    zil_itx_destroy() function. Since all consumers of zil_itx_destroy()
    were effectively performing the same logic (i.e. if callback is
    non-null, call the callback), it seemed like useful code cleanup to
    consolidate this logic into a single function.

Additionally, the existing Linux tracepoint infrastructure dealing with
the ZIL's probes and structures had to be updated to reflect these code
changes. Specifically:

  * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be
    removed from "trace_zil.h" as well.

  * Some of the zilog structure's fields were removed, which affected
    the tracepoint definitions of the structure.

  * New tracepoints had to be added for the following 3 new probes:
      * zil__process__commit__itx
      * zil__process__normal__itx
      * zil__commit__io__error

OpenZFS-issue: https://www.illumos.org/issues/8585
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a
Closes #6566
2017-12-05 09:39:16 -08:00
Brian Behlendorf ea39f75f64
Fix 'zpool create|add' replication level check
When the pool configuration contains a hole due to a previous device
removal ignore this top level vdev.  Failure to do so will result in
the current configuration being assessed to have a non-uniform
replication level and the expected warning will be disabled.

The zpool_add_010_pos test case was extended to cover this scenario.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6907 
Closes #6911
2017-12-04 11:50:35 -08:00
Scot W. Stevenson 8d18776973 Fix data on evict_skips in arc_summary.py
Display correct data from kstat arcstats for evict_skips,
which is currently repeating the data from mutex_misses.
Fixes #6882

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6882 
Closes #6883
2017-11-18 14:07:04 -08:00
Tom Caputi d4a72f2386 Sequential scrub and resilvers
Currently, scrubs and resilvers can take an extremely
long time to complete. This is largely due to the fact
that zfs scans process pools in logical order, as
determined by each block's bookmark. This makes sense
from a simplicity perspective, but blocks in zfs are
often scattered randomly across disks, particularly
due to zfs's copy-on-write mechanisms.

This patch improves performance by splitting scrubs
and resilvers into a metadata scanning phase and an IO
issuing phase. The metadata scan reads through the
structure of the pool and gathers an in-memory queue
of I/Os, sorted by size and offset on disk. The issuing
phase will then issue the scrub I/Os as sequentially as
possible, greatly improving performance.

This patch also updates and cleans up some of the scan
code which has not been updated in several years.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Authored-by: Alek Pinchuk <apinchuk@datto.com>
Authored-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #3625 
Closes #6256
2017-11-15 17:27:01 -08:00
Scot W. Stevenson e301113c17 Minor code cleanups in arc_python.py
Remove unused library re and associated variable kstat_pobj. Add note
to documentation at start of program about required support for old
versions of Python. Change variable "format" (which is a built-in
function) to "fmt".

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6869
2017-11-15 10:28:11 -08:00
Scot W. Stevenson 5277f208f2 Fix arc_summary.py -d crash with Python3
Prevents arc_summary.py crashing when called with parameter -d or
long form --description with Python3.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6849 
Closes #6850
2017-11-11 20:27:43 -08:00
Scot W. Stevenson 681957fe2e Sort output of tunables in arc_summary.py
Sort list of tunables printed by _tunable_summary()
alphabetically

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6828
2017-11-07 14:50:15 -08:00
Scot W. Stevenson 23ea00a1fe Add documentation strings to arc_summary.py
Include docstrings (PEP8, PEP257) for module and all functions.
Separately, remove outdated section in comment at start of
module. Separately, remove unused global constant "usetunable".

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6818
2017-11-05 13:11:37 -08:00
George G 2df9ad1c07 Fix column alignment with long zpool names
`zpool status` normally aligns NAME/STATE/etc columns:

    NAME                       STATE     READ WRITE CKSUM
    dummy                      ONLINE       0     0     0
      mirror-0                 ONLINE       0     0     0
        /tmp/dummy-long-1.bin  ONLINE       0     0     0
        /tmp/dummy-long-2.bin  ONLINE       0     0     0
      mirror-1                 ONLINE       0     0     0
        /tmp/dummy-long-3.bin  ONLINE       0     0     0
        /tmp/dummy-long-4.bin  ONLINE       0     0     0

However, if the zpool name is longer than the zvol names, alignment
issues arise:

    NAME                  STATE     READ WRITE CKSUM
    dummy-very-very-long-zpool-name  ONLINE       0     0     0
      mirror-0            ONLINE       0     0     0
        /tmp/dummy-1.bin  ONLINE       0     0     0
        /tmp/dummy-2.bin  ONLINE       0     0     0
      mirror-1            ONLINE       0     0     0
        /tmp/dummy-3.bin  ONLINE       0     0     0
        /tmp/dummy-4.bin  ONLINE       0     0     0

`zpool iostat` and `zpool import` are also affected:

                  capacity     operations     bandwidth
    pool        alloc   free   read  write   read  write
    ----------  -----  -----  -----  -----  -----  -----
    dummy        104K  1.97G      0      0    152  9.84K
    dummy-very-very-long-zpool-name   152K  1.97G      0      1    144  13.1K
    ----------  -----  -----  -----  -----  -----  -----

    dummy-very-very-long-zpool-name  ONLINE
      mirror-0            ONLINE
        /tmp/dummy-1.bin  ONLINE
        /tmp/dummy-2.bin  ONLINE
      mirror-1            ONLINE
        /tmp/dummy-3.bin  ONLINE
        /tmp/dummy-4.bin  ONLINE

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Gaydarov <git@gg7.io>
Closes #6786
2017-11-05 13:09:56 -08:00
Scot W. Stevenson cd1813d36e Rewrite fHits() in arc_summary.py with SI units
Complete rewrite of fHits(). Move units from non-standard English
abbreviations to SI units, thereby avoiding confusion because of
"long scale" and "short scale" numbers. Remove unused parameter
"Decimal". Add function string. Aim to confirm to PEP8.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6815
2017-11-04 13:33:28 -07:00
Scot W. Stevenson df1f129bc4 Minor code cleanup in arc_summary.py
Simplify and inline single-use function div1(); inline twice-used
function div2(); add function comment to zfs_header(); replace
variable "unused" in get_Kstat() with "_" following convention.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6802
2017-11-03 15:43:53 -07:00
Jason King f3c8c9e6f0 OpenZFS 640 - number_to_scaled_string is duplicated in several commands
Porting Notes:
- The OpenZFS patch added nicenum_scale() and nicenum() to a
  library not used by ZFS.  Rather than pull in a new dependency
  the version of nicenum in lib/libzpool/util.c was simply
  replaced with the new one.

Reviewed by: Sebastian Wiedenroth <wiedi@frubar.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Authored by: Jason King <jason.brian.king@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/640
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0a055120
Closes #6796
2017-10-30 14:47:20 -07:00
Scot W. Stevenson 47c8e7fd97 Rewrite of function fBytes() in arc_summary.py
Replace if-elif-else construction with shorter loop;
remove unused parameter "Decimal"; centralize format
string; add function documentation string; conform to
PEP8.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6784
2017-10-30 14:44:35 -07:00
Brian Behlendorf 867959b588
OpenZFS 8081 - Compiler warnings in zdb
Fix compiler warnings in zdb.  With these changes, FreeBSD can compile
zdb with all compiler warnings enabled save -Wunused-parameter.

usr/src/cmd/zdb/zdb.c
usr/src/cmd/zdb/zdb_il.c
usr/src/uts/common/fs/zfs/sys/sa.h
usr/src/uts/common/fs/zfs/sys/spa.h
	Fix numerous warnings, including:
	* const-correctness
	* shadowing global definitions
	* signed vs unsigned comparisons
	* missing prototypes, or missing static declarations
	* unused variables and functions
	* Unreadable array initializations
	* Missing struct initializers

usr/src/cmd/zdb/zdb.h
	Add a header file to declare common symbols

usr/src/lib/libzpool/common/sys/zfs_context.h
usr/src/uts/common/fs/zfs/arc.c
usr/src/uts/common/fs/zfs/dbuf.c
usr/src/uts/common/fs/zfs/spa.c
usr/src/uts/common/fs/zfs/txg.c
	Add a function prototype for zk_thread_create, and ensure that every
	callback supplied to this function actually matches the prototype.

usr/src/cmd/ztest/ztest.c
usr/src/uts/common/fs/zfs/sys/zil.h
usr/src/uts/common/fs/zfs/zfs_replay.c
usr/src/uts/common/fs/zfs/zvol.c
	Add a function prototype for zil_replay_func_t, and ensure that
	every function of this type actually matches the prototype.

usr/src/uts/common/fs/zfs/sys/refcount.h
	Change FTAG so it discards any constness of __func__, necessary
	since existing APIs expect it passed as void *.

Porting Notes:
- Many of these fixes have already been applied to Linux.  For
  consistency the OpenZFS version of a change was applied if the
  warning was addressed in an equivalent but different fashion.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Authored by: Alan Somers <asomers@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8081
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a
Closes #6787
2017-10-27 12:46:35 -07:00
LOLi 88f9c9396b Allow 'zpool events' filtering by pool name
Additionally add four new tests:

 * zpool_events_clear: verify 'zpool events -c' functionality
 * zpool_events_cliargs: verify command line options and arguments
 * zpool_events_follow: verify 'zpool events -f'
 * zpool_events_poolname: verify events filtering by pool name

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3285 
Closes #6762
2017-10-26 16:49:33 -07:00
Arkadiusz Bubała d3f2cd7e3b Added no_scrub_restart flag to zpool reopen
Added -n flag to zpool reopen that allows a running scrub
operation to continue if there is a device with Dirty Time Log.

By default if a component device has a DTL and zpool reopen
is executed all running scan operations will be restarted.

Added functional tests for `zpool reopen`

Tests covers following scenarios:
* `zpool reopen` without arguments,
* `zpool reopen` with pool name as argument,
* `zpool reopen` while scrubbing,
* `zpool reopen -n` while scrubbing,
* `zpool reopen -n` while resilvering,
* `zpool reopen` with bad arguments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes #6076 
Closes #6746
2017-10-26 12:26:09 -07:00
Fabian-Gruenbichler 3ad59c015d arcstat: flush stdout / outfile after each line
Otherwise, if arcstat gets interrupted before the desired number of
iterations is reached, the output file will be empty (both if set via
'-o' or via shell redirection).

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes #6775
2017-10-26 12:18:49 -07:00
Giuseppe Di Natale 64b8c58e3e Ensure arc_size_break is filled in arc_summary.py
Use mfu_size and mru_size pulled from the arcstats
kstat file to calculate the mfu and mru percentages
for arc size breakdown.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: AndCycle <andcycle@andcycle.idv.tw>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5526 
Closes #6770
2017-10-23 14:18:12 -07:00
Giuseppe Di Natale 63e5e960ba Correct flake8 errors after STYLE builder update
Fix new flake8 errors related to bare excepts and ambiguous
variable names due to a STYLE builder update.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6776
2017-10-23 14:01:43 -07:00
adisbladis f8cd871a01 Use ashift=12 by default on SSDSC2BW48 disks
Currently the 480GB models of this disk do not use ashift=12 by
default.  SSDSC2BW48 is also optimized for 4k blocks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: adisbladis <adis@blad.is>
Closes #6774
2017-10-23 11:00:45 -07:00
Tobin Harding c721ba435f Fix coverity defects: CID 161388
CID 161388: Resource Leak (REASOURCE_LEAK)

Jump to errout so that file descriptor gets closed before returning
from function.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Closes #6755
2017-10-17 09:37:50 -07:00
Tobin Harding ced28193b0 Fix coverity defects: 147480, 147584
CID 147480: Logically dead code (DEADCODE)

Remove non-null check and subsequent function call. Add ASSERT to future
proof the code.

usage label is only jumped to before `zhp` is initialized.

CID 147584: Out-of-bounds access (OVERRUN)

Subtract length of current string from buffer length for `size` argument
to `snprintf`.

Starting address for the write is the start of the buffer + the current
string length. We need to subtract this string length else risk a buffer
overflow.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Closes #6745
2017-10-16 15:32:48 -07:00
Tom Caputi 440a3eb939 Fixes for #6639
Several issues were uncovered by running stress tests with zfs
encryption and raw sends in particular. The issues and their
associated fixes are as follows:

* arc_read_done() has the ability to chain several requests for
  the same block of data via the arc_callback_t struct. In these
  cases, the ARC would only use the first request's dsobj from
  the bookmark to decrypt the data. This is problematic because
  the first request might be a prefetch zio which is able to
  handle the key not being loaded, while the second might use a
  different key that it is sure will work. The fix here is to
  pass the dsobj with each individual arc_callback_t so that each
  request can attempt to decrypt the data separately.

* DRR_FREE and DRR_FREEOBJECT records in a send file were not
  having their transactions properly tagged as raw during raw
  sends, which caused a panic when the dbuf code attempted to
  decrypt these blocks.

* traverse_prefetch_metadata() did not properly set
  ZIO_FLAG_SPECULATIVE when issuing prefetch IOs.

* Added a few asserts and code cleanups to ensure these issues
  are more detectable in the future.

Signed-off-by: Tom Caputi <tcaputi@datto.com>
2017-10-11 16:55:50 -04:00
Tom Caputi 4807c0badb Encryption patch follow-up
* PBKDF2 implementation changed to OpenSSL implementation.

* HKDF implementation moved to its own file and tests
  added to ensure correctness.

* Removed libzfs's now unnecessary dependency on libzpool
  and libicp.

* Ztest can now create and test encrypted datasets. This is
  currently disabled until issue #6526 is resolved, but
  otherwise functions as advertised.

* Several small bug fixes discovered after enabling ztest
  to run on encrypted datasets.

* Fixed coverity defects added by the encryption patch.

* Updated man pages for encrypted send / receive behavior.

* Fixed a bug where encrypted datasets could receive
  DRR_WRITE_EMBEDDED records.

* Minor code cleanups / consolidation.

Signed-off-by: Tom Caputi <tcaputi@datto.com>
2017-10-11 16:54:48 -04:00
Tobin Harding a0430cc5a9 Use bitwise '&' instead of logical '&&'
Make two instances of the same change. Change bitwise AND (&) to logical
AND (&&).

Currently the code uses a bitwise AND between two boolean values.

In the first instance;

The first operand is a flag that has been bitwise combined with a bit
mask to get a boolean value as to whether a file has group write
permissions set.

The second operand used is a struct member that is intended as a
boolean flag not a bit mask.

In the second instance the argument is the same except with world write
permissions instead of group write (S_IWOTH, S_IWGRP).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Closes #6684 
Closes #6722
2017-10-05 19:38:55 -07:00
Simon Guest 269db7a4b3 vdev_id: extension for new scsi topology
On systems with SCSI rather than SAS disk topology, this change enables
the vdev_id script to match against the block device path, and therefore
create a vdev alias in /dev/disk/by-vdev.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Simon Guest <simon.guest@tesujimath.org>
Closes #6592
2017-09-27 10:39:47 -07:00
LOLi 3fd3e56cfd Fix some ZFS Test Suite issues
* Add 'zfs bookmark' coverage (zfs_bookmark_cliargs)

 * Add OpenZFS 8166 coverage (zpool_scrub_offline_device)

 * Fix "busy" zfs_mount_remount failures

 * Fix bootfs_003_pos, bootfs_004_neg, zdb_005_pos local cleanup

 * Update usage of $KEEP variable, add get_all_pools() function

 * Enable history_008_pos and rsend_019_pos (non-32bit builders)

 * Enable zfs_copies_005_neg, update local cleanup

 * Fix zfs_send_007_pos (large_dnode + OpenZFS 8199)

 * Fix rollback_003_pos (use dataset name, not mountpoint, to unmount)

 * Update default_raidz_setup() to work properly with more than 3 disks

 * Use $TEST_BASE_DIR instead of hardcoded (/var)/tmp for file VDEVs

 * Update usage of /dev/random to /dev/urandom

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Issue #6086 
Closes #5658 
Closes #6143 
Closes #6421 
Closes #6627 
Closes #6632
2017-09-25 10:32:34 -07:00
Olaf Faaland b33d668ddb Fix ZTS MMP tests and ztest -M behavior
Quote "$MMP_IMPORT_MSG" when it is passed as an argument, as it is a
multi-word string.  Some tests were passing when they should not have,
because the grep was only testing for the first word.

Correct the message expected when no hostid is set and the test attempts
to enable multihost.  It did not match the actual output in that
situation.

Disable ztest_reguid() when ztest is invoked with the -M option.  If
ztest performs a reguid, a concurrent import attempt may fail with the
error "one or more devices is currently unavailable" if the guid sum is
calculated on the original device guids but compared against the guid
sum ztest wrote based on the new device guids.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6666
2017-09-23 09:28:18 -07:00
David Quigley a9a2bf7152 Remove FRU and LIBTOPO Support
FRU and LIBTOPO support are illumos only features that will not be ported to
Linux and make the code more complicated than necessary. This commit
makes way for further cleanups of the zed/FMA code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #6641
2017-09-18 17:06:40 -07:00
David Quigley 1f4e2c88fd ZTEST: Always enable asserts
The build for ztest always enabled debug information but does not enable
asserts unless --enable-debug is used. This will always enable asserts
in the ztest code.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #6640
2017-09-15 13:26:05 -07:00
LOLi 835db58592 Add -vnP support to 'zfs send' for bookmarks
This leverages the functionality introduced in cf7684b to expose
verbose, dry-run and parsable 'zfs send' options for bookmarks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3666 
Closes #6601
2017-09-08 15:24:31 -07:00
Olaf Faaland 4c5b89f59e Improved dnode allocation and dmu_hold_impl()
Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the
code, fix errors introduced by commit dbeb879 (PR #6117) interacting
badly with large dnodes, and improve performance.

* When allocating a new dnode in dmu_object_alloc_dnsize(), update the
percpu object ID for the core's metadnode chunk immediately.  This
eliminates most lock contention when taking the hold and creating the
dnode.

* Correct detection of the chunk boundary to work properly with large
dnodes.

* Separate the dmu_hold_impl() code for the FREE case from the code for
the ALLOCATED case to make it easier to read.

* Fully populate the dnode handle array immediately after reading a
block of the metadnode from disk.  Subsequently the dnode handle array
provides enough information to determine which dnode slots are in use
and which are free.

* Add several kstats to allow the behavior of the code to be examined.

* Verify dnode packing in large_dnode_008_pos.ksh.  Since the test is
purely creates, it should leave very few holes in the metadnode.

* Add test large_dnode_009_pos.ksh, which performs concurrent creates
and deletes, to complement existing test which does only creates.

With the above fixes, there is very little contention in a test of about
200,000 racing dnode allocations produced by tests 'large_dnode_008_pos'
and 'large_dnode_009_pos'.

name                            type data
dnode_hold_dbuf_hold            4    0
dnode_hold_dbuf_read            4    0
dnode_hold_alloc_hits           4    3804690
dnode_hold_alloc_misses         4    216
dnode_hold_alloc_interior       4    3
dnode_hold_alloc_lock_retry     4    0
dnode_hold_alloc_lock_misses    4    0
dnode_hold_alloc_type_none      4    0
dnode_hold_free_hits            4    203105
dnode_hold_free_misses          4    4
dnode_hold_free_lock_misses     4    0
dnode_hold_free_lock_retry      4    0
dnode_hold_free_overflow        4    0
dnode_hold_free_refcount        4    57
dnode_hold_free_txg             4    0
dnode_allocate                  4    203154
dnode_reallocate                4    0
dnode_buf_evict                 4    23918
dnode_alloc_next_chunk          4    4887
dnode_alloc_race                4    0
dnode_alloc_next_block          4    18

The performance is slightly improved for concurrent creates with
16+ threads, and unchanged for low thread counts.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5396 
Closes #6522 
Closes #6414 
Closes #6564
2017-09-05 16:15:04 -07:00
LOLi db4c1adaf8 Add support for DMU_OTN_* types in dbufstat.py
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6535
2017-08-22 11:53:40 -07:00
LOLi f763c3d1df Fix range locking in ZIL commit codepath
Since OpenZFS 7578 (1b7c1e5) if we have a ZVOL with logbias=throughput
we will force WR_INDIRECT itxs in zvol_log_write() setting itx->itx_lr
offset and length to the offset and length of the BIO from
zvol_write()->zvol_log_write(): these offset and length are later used
to take a range lock in zillog->zl_get_data function: zvol_get_data().

Now suppose we have a ZVOL with blocksize=8K and push 4K writes to
offset 0: we will only be range-locking 0-4096. This means the
ASSERTion we make in dbuf_unoverride() is no longer valid because now
dmu_sync() is called from zilog's get_data functions holding a partial
lock on the dbuf.

Fix this by taking a range lock on the whole block in zvol_get_data().

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6238 
Closes #6315 
Closes #6356 
Closes #6477
2017-08-21 08:59:48 -07:00
Brian Behlendorf c8f9061fc7 Retire legacy test infrastructure
* Removed zpios kmod, utility, headers and man page.

* Removed unused scripts zpios-profile/*, zpios-test/*,
  zpool-config/*, smb.sh, zpios-sanity.sh, zpios-survey.sh,
  zpios.sh, and zpool-create.sh.

* Removed zfs-script-config.sh.in.  When building 'make' generates
  a common.sh with in-tree path information from the common.sh.in
  template.  This file and sourced by the test scripts and used
  for in-tree testing, it is not included in the packages.  When
  building packages 'make install' uses the same template to
  create a new common.sh which is appropriate for the packaging.

* Removed unused functions/variables from scripts/common.sh.in.
  Only minimal path information and configuration environment
  variables remain.

* Removed unused scripts from scripts/ directory.

* Remaining shell scripts in the scripts directory updated to
  cleanly pass shellcheck and added to checked scripts.

* Renamed tests/test-runner/cmd/ to tests/test-runner/bin/ to
  match install location name.

* Removed last traces of the --enable-debug-dmu-tx configure
  options which was retired some time ago.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6509
2017-08-15 17:26:38 -07:00
sckobras d49d9c2bdc vdev_id: implement slot numbering by port id
With HPE hardware and hpsa-driven SAS adapters, only a single phy is
reported, but no individual per-port phys (ie. no phy* entry below
port_dir), which breaks topology detection in the current sas_handler
code. Instead, slot information can be derived directly from the port
number. This change implements a new slot keyword "port" similar to
"id" and "lun", and assumes a default phy/port of 0 if no individual
phy entry can be found. It allows to use the "sas_direct" topology with
current HPE Dxxxx and Apollo 45xx JBODs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Daniel Kobras <d.kobras@science-computing.de>
Closes #6484
2017-08-14 15:18:26 -07:00
Don Brady d977122da9 Add corruption failure option to zinject(8)
Added a 'corrupt' error option that will flip a bit in the data
after a read operation.  This is useful for generating checksum
errors at the device layer (in a mirror config for example). It
is also used to validate the diagnosis of checksum errors from
the zfs diagnosis engine.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6345
2017-08-14 15:17:15 -07:00
Tom Caputi b525630342 Native Encryption for ZFS on Linux
This change incorporates three major pieces:

The first change is a keystore that manages wrapping
and encryption keys for encrypted datasets. These
commands mostly involve manipulating the new
DSL Crypto Key ZAP Objects that live in the MOS. Each
encrypted dataset has its own DSL Crypto Key that is
protected with a user's key. This level of indirection
allows users to change their keys without re-encrypting
their entire datasets. The change implements the new
subcommands "zfs load-key", "zfs unload-key" and
"zfs change-key" which allow the user to manage their
encryption keys and settings. In addition, several new
flags and properties have been added to allow dataset
creation and to make mounting and unmounting more
convenient.

The second piece of this patch provides the ability to
encrypt, decyrpt, and authenticate protected datasets.
Each object set maintains a Merkel tree of Message
Authentication Codes that protect the lower layers,
similarly to how checksums are maintained. This part
impacts the zio layer, which handles the actual
encryption and generation of MACs, as well as the ARC
and DMU, which need to be able to handle encrypted
buffers and protected data.

The last addition is the ability to do raw, encrypted
sends and receives. The idea here is to send raw
encrypted and compressed data and receive it exactly
as is on a backup system. This means that the dataset
on the receiving system is protected using the same
user key that is in use on the sending side. By doing
so, datasets can be efficiently backed up to an
untrusted system without fear of data being
compromised.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #494 
Closes #5769
2017-08-14 10:36:48 -07:00
Brian Behlendorf c25b8f99f8 Simplify threads, mutexs, cvs and rwlocks
* Simplify threads, mutexs, cvs and rwlocks

* Update the zk_thread_create() function to use the same trick
  as Illumos.  Specifically, cast the new pthread_t to a void
  pointer and return that as the kthread_t *.  This avoids the
  issues associated with managing a wrapper structure and is
  safe as long as the callers never attempt to dereference it.

* Update all function prototypes passed to pthread_create() to
  match the expected prototype.  We were getting away this with
  before since the function were explicitly cast.

* Replaced direct zk_thread_create() calls with thread_create()
  for code consistency.  All consumers of libzpool now use the
  proper wrappers.

* The mutex_held() calls were converted to MUTEX_HELD().

* Removed all mutex_owner() calls and retired the interface.
  Instead use MUTEX_HELD() which provides the same information
  and allows the implementation details to be hidden.  In this
  case the use of the pthread_equals() function.

* The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had
  any non essential fields removed.  In the case of kthread_t
  and kcondvar_t they could be directly typedef'd to pthread_t
  and pthread_cond_t respectively.

* Removed all extra ASSERTS from the thread, mutex, rwlock, and
  cv wrapper functions.  In practice, pthreads already provides
  the vast majority of checks as long as we check the return
  code.  Removing this code from our wrappers help readability.

* Added TS_JOINABLE state flag to pass to request a joinable rather
  than detached thread.  This isn't a standard thread_create() state
  but it's the least invasive way to pass this information and is
  only used by ztest.

TEST_ZTEST_TIMEOUT=3600

Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4547 
Closes #5503 
Closes #5523 
Closes #6377 
Closes #6495
2017-08-11 08:51:44 -07:00
Brian Behlendorf 46364cb2f3 Add libtpool (thread pools)
OpenZFS provides a library called tpool which implements thread
pools for user space applications.  Porting this library means
the zpool utility no longer needs to borrow the kernel mutex and
taskq interfaces from libzpool.  This code was updated to use
the tpool library which behaves in a very similar fashion.

Porting libtpool was relatively straight forward and minimal
modifications were needed.  The core changes were:

* Fully convert the library to use pthreads.
* Updated signal handling.
* lmalloc/lfree converted to calloc/free
* Implemented portable pthread_attr_clone() function.

Finally, update the build system such that libzpool.so is no
longer linked in to zfs(8), zpool(8), etc.  All that is required
is libzfs to which the zcommon soures were added (which is the way
it always should have been).  Removing the libzpool dependency
resulted in several build issues which needed to be resolved.

* Moved zfeature support to module/zcommon/zfeature_common.c
* Moved ratelimiting to to module/zfs/zfs_ratelimit.c
* Moved get_system_hostid() to lib/libspl/gethostid.c
* Removed use of cmn_err() in zcommon source
* Removed dprintf_setup() call from zpool_main.c and zfs_main.c
* Removed highbit() and lowbit()
* Removed unnecessary library dependencies from Makefiles
* Removed fletcher-4 kstat in user space
* Added sha2 support explicitly to libzfs
* Added highbit64() and lowbit64() to zpool_util.c

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6442
2017-08-09 15:31:08 -07:00
Sen Haerens 1e1c398033 Fix zpool events scripted mode tab separator
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Sen Haerens <sen@senhaerens.be>
Closes #6444 
Closes #6445
2017-08-03 09:56:15 -07:00
Ned Bass 73aac4aa41 Some additional send stream validity checking
Check in the DMU whether an object record in a send stream being
received contains an unsupported dnode slot count, and return an
error if it does. Failure to catch an unsupported dnode slot count
would result in a panic when the SPA attempts to increment the
reference count for the large_dnode feature and the pool has the
feature disabled. This is not normally an issue for a well-formed
send stream which would have the DMU_BACKUP_FEATURE_LARGE_DNODE flag
set if it contains large dnodes, so it will be rejected as
unsupported if the required feature is disabled. This change adds a
missing object record field validation.

Add missing stream feature flag checks in
dmu_recv_resume_begin_check().

Consolidate repetitive comment blocks in dmu_recv_begin_check().

Update zstreamdump to print the dnode slot count (dn_slots) for an
object record when running in verbose mode.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6396
2017-07-25 18:52:40 -07:00
Olaf Faaland 0582e40322 Add callback for zfs_multihost_interval
Add a callback to wake all running mmp threads when
zfs_multihost_interval is changed.

This is necessary when the interval is changed from a very large value
to a significantly lower one, while pools are imported that have the
multihost property enabled.

Without this commit, the mmp thread does not wake up and detect the new
interval until after it has waited the old multihost interval time.  A
user monitoring mmp writes via the provided kstat would be led to
believe that the changed setting did not work.

Added a test in the ZTS under mmp to verify the new functionality is
working.

Added a test to ztest which starts and stops mmp threads, and calls into
the code to signal sleeping mmp threads, to test for deadlocks or
similar locking issues.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6387
2017-07-25 13:22:20 -04:00
Olaf Faaland 60f5103445 Skip activity check for zhack RO import
"zhack feature stat" performs a read-only import, so the MMP activity
check is not necessary.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6388
Closes #6389
2017-07-25 13:22:14 -04:00
Olaf Faaland b9373170e3 Add zgenhostid utility script
Turning the multihost property on requires that a hostid be set to allow
ZFS to determine when a foreign system is attemping to import a pool.
The error message instructing the user to set a hostid refers to
genhostid(1).

Genhostid(1) is not available on SUSE Linux.  This commit adds a script
modeled after genhostid(1) for those users.

Zgenhostid checks for an /etc/hostid file; if it does not exist, it
creates one and stores a value.  If the user has provided a hostid as an
argument, that value is used.  Otherwise, a random hostid is generated
and stored.

This differs from the CENTOS 6/7 versions of genhostid, which overwrite
the /etc/hostid file even though their manpages state otherwise.

A man page for zgenhostid is added. The one for genhostid is in (1), but
I put zgenhostid in (8) because I believe it's more appropriate.

The mmp tests are modified to use zgenhostid to set the hostid instead
of using the spl_hostid module parameter.  zgenhostid will not replace
an existing /etc/hostid file, so new mmp_clear_hostid calls are
required.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6358
Closes #6379
2017-07-25 13:22:03 -04:00
Chunwei Chen 83a5e4d6b9 Fix don't zero_label when replace with spare
When replacing a disk with non-wholedisk spare, we shouldn't zero_label
it. The wholedisk case already skip it. In fact, zero_label function
will fail saying device busy because it's already opened exclusively,
but since there's no error checking, the replace command will succeed,
causing great confusion.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #6369
2017-07-24 12:49:27 -07:00
Giuseppe Di Natale d6bcf7ff5e Restrict zpool iostat/status -c to search path
zpool iostat/status -c is supposed to be restricted
by its search path, but currently isn't. To prevent
arbitrary scripts from being executed, disallow '/'
from commands.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6353 
Closes #6359
2017-07-24 11:53:59 -07:00
George Melikov 4265a9293e Fix coverity defects: CID 165757
CID 165757: Control flow issues (MISSING_BREAK)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #6348
2017-07-14 09:34:35 -07:00
Olaf Faaland 379ca9cf2b Multi-modifier protection (MMP)
Add multihost=on|off pool property to control MMP.  When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp.  Property defaults to off.

During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock.  Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".

Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval.  The period is specified in milliseconds.  The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.

Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path.  Abbreviated
output below.

$ cat /proc/spl/kstat/zfs/mypool/multihost
31 0 0x01 10 880 105092382393521 105144180101111
txg   timestamp  mmp_delay   vdev_guid   vdev_label vdev_path
20468    261337  250274925   68396651780       3    /dev/sda
20468    261339  252023374   6267402363293     1    /dev/sdc
20468    261340  252000858   6698080955233     1    /dev/sdx
20468    261341  251980635   783892869810      2    /dev/sdy
20468    261342  253385953   8923255792467     3    /dev/sdd
20468    261344  253336622   042125143176      0    /dev/sdab
20468    261345  253310522   1200778101278     2    /dev/sde
20468    261346  253286429   0950576198362     2    /dev/sdt
20468    261347  253261545   96209817917       3    /dev/sds
20468    261349  253238188   8555725937673     3    /dev/sdb

Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.

When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test.  For example, the
pool is exported to run zdb and then imported again.  Add a new ztest
function, "-M", to alter ztest behavior to prevent this.

Add new tests to verify the new functionality.  Tests provided by
Giuseppe Di Natale.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #745
Closes #6279
2017-07-13 13:54:00 -04:00
Matthew Ahrens a896468c78 OpenZFS 8067 - zdb should be able to dump literal embedded block pointer
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8067
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085
Closes #6319
2017-07-07 11:28:01 -07:00
Alek P 0ea05c64f8 Implemented zpool scrub pause/resume
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.

This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6167
2017-07-06 22:16:13 -07:00
Matthew Ahrens 02dc43bc46 OpenZFS 8378 - crash due to bp in-memory modification of nopwrite block
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

The problem is that zfs_get_data() supplies a stale zgd_bp to
dmu_sync(), which we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it
copies db_blkptr to zgd_bp, dbuf_write_ready() could change
db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale BP and that the dbuf it not dirty,
so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after
acquiring the db_mtx. We could still see a stale db_blkptr,
but if it is stale then the dirty record will still exist and
thus we won't attempt to nopwrite.

OpenZFS-issue: https://www.illumos.org/issues/8378
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3127742
Closes #6293
2017-07-04 15:41:24 -07:00
Matthew Ahrens 817b1b6e7b Clean up large dnode code
Resolves issues discovered when porting to OpenZFS.

* Lint warnings.
* Made dnode_move_impl() large dnode aware.  This
  functionality is currently unused on Linux.

Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #6262
2017-06-29 10:18:03 -07:00
Tony Hutter 682ce104cd GCC 7.1 fixes
GCC 7.1 with will warn when we're not checking the snprintf()
return code in cases where the buffer could be truncated. This
patch either checks the snprintf return code (where applicable),
or simply disables the warnings (ztest.c).

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6253
2017-06-28 10:05:16 -07:00
Tony Hutter 29eb494285 Dashes for zero latency values in zpool iostat -p
This prints dashes instead of zeros for zero latency values in
'zpool iostat -p'.  You'll get zero latencies reported when the
disk is idle, but technically a zero latency is invalid, since you
can't measure the latency of doing nothing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6210
2017-06-22 09:39:01 -07:00
Don Brady 0241e491a0 Inject zinject(8) a percentage amount of dev errs
In the original form of device error injection, it was an all or nothing
situation.  To help simulate intermittent error conditions, you can now
specify a real number percentage value. This is also very useful for our
ZFS fault diagnosis testing and for injecting intermittent errors during
load testing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6227
2017-06-16 17:21:11 -07:00
kpande 88c30122e5 Add missing \n for "invalid optionusage" output
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Jack Draak <jackdraak@gmail.com>
Signed-off-by: Kash Pande <kash@tripleback.net>
Closes #6203
2017-06-09 09:51:13 -07:00
Giuseppe Di Natale 1b7c1e5ce9 OpenZFS 7578 - Fix/improve some aspects of ZIL writing
- After some ZIL changes 6 years ago zil_slog_limit got partially broken
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.

 - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG.  Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.

 - Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size.  In some
cases efficiency stopped to almost as low as 50%.  In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas.  This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently.  Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.

 - While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.

Sponsored by:   iXsystems, Inc.

Authored by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7578
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac
Closes #6191
2017-06-09 09:15:37 -07:00
Brian Behlendorf 4070bfd852 Add MS_MANDLOCK mount failure message
Commit torvalds/linux@9e8925b6 allowed for kernels to be built
without support for mandatory locking (MS_MANDLOCK).  This will
result in 'zfs mount' failing when the nbmand=on property is set
if the kernel is built without CONFIG_MANDATORY_FILE_LOCKING.

Unfortunately we can not reliably detect prior to the mount(2) system
call if the kernel was built with this support.  The best we can do
is check if the mount failed with EPERM and if we passed 'mand'
as a mount option and then print a more useful error message. e.g.

  filesystem 'tank/fs' has the 'nbmand=on' property set, this mount
  option may be disabled in your kernel.  Use 'zfs set nbmand=off'
  to disable this option and try to mount the filesystem again.

Additionally, switch the default error message case to use
strerror() to produce a more human readable message.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4729
Closes #6199
2017-06-07 10:59:44 -07:00
Håkan Johansson 6eb6073a04 Allow add of raidz and mirror with same redundancy
Allow new members to be added to a pool mixing raidz and mirror vdevs
without giving -f, as long as they have matching redundancy.  This case
was missed in #5915, which only handled zpool create.

Add zfstest zpool_add_010_pos.ksh, with test of zpool create
followed by zpool add of mixed raidz and mirror vdevs.

Add some more mixed raidz and mirror cases to zpool_create_006_pos.ksh.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Haakan Johansson <f96hajo@chalmers.se>
Issue #5915 
Closes #6181
2017-06-05 13:53:09 -07:00
Giuseppe Di Natale 099700d9df zpool iostat/status -c improvements
Users can now provide their own scripts to be run
with 'zpool iostat/status -c'. User scripts should be
placed in ~/.zpool.d to be included in zpool's
default search path.

Provide a script which can be used with
'zpool iostat|status -c' that will return the type of
device (hdd, sdd, file).

Provide a script to get various values from smartctl
when using 'zpool iostat/status -c'.

Allow users to define the ZPOOL_SCRIPTS_PATH
environment variable which can be used to override
the default 'zpool iostat/status -c' search path.

Allow the ZPOOL_SCRIPTS_ENABLED environment
variable to enable or disable 'zpool status/iostat -c'
functionality.

Use the new smart script to provide the serial command.

Install /etc/sudoers.d/zfs file which contains the sudoer
rule for smartctl as a sample.

Allow 'zpool iostat/status -c' tests to run in tree.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6121 
Closes #6153
2017-06-05 10:52:15 -07:00
Brian Behlendorf 95401cb6f7 Enable remaining tests
Enable most of the remaining test cases which were previously
disabled.  The required fixes are as follows:

* cache_001_pos - No changes required.

* cache_010_neg - Updated to use losetup under Linux.  Loopback
  cache devices are allowed, ZVOLs as cache devices are not.
  Disabled until all the builders pass reliably.

* cachefile_001_pos, cachefile_002_pos, cachefile_003_pos,
  cachefile_004_pos - Set set_device_dir path in cachefile.cfg,
  updated CPATH1 and CPATH2 to reference unique files.

* zfs_clone_005_pos - Wait for udev to create volumes.

* zfs_mount_007_pos - Updated mount options to expected Linux names.

* zfs_mount_009_neg, zfs_mount_all_001_pos - No changes required.

* zfs_unmount_005_pos, zfs_unmount_009_pos, zfs_unmount_all_001_pos -
  Updated to expect -f to not unmount busy mount points under Linux.

* rsend_019_pos - Observed to occasionally take a long time on both
  32-bit systems and the kmemleak builder.

* zfs_written_property_001_pos - Switched sync(1) to sync_pool.

* devices_001_pos, devices_002_neg - Updated create_dev_file() helper
  for Linux.

* exec_002_neg.ksh - Fixed mmap_exec.c to preserve errno.  Updated
  test case to expect EPERM from Linux as described by mmap(2).

* grow_pool_001_pos - Adding missing setup.ksh and cleanup.ksh
  scripts from OpenZFS.

* grow_replicas_001_pos.ksh - Added missing $SLICE_* variables.

* history_004_pos, history_006_neg, history_008_pos - Fixed by
  previous commits and were not enabled.  No changes required.

* zfs_allow_010_pos - Added missing spaces after assorted zfs
  commands in delegate_common.kshlib.

* inuse_* - Illumos dump device tests skipped.  Remaining test
  cases updated to correctly create required partitions.

* large_files_001_pos - Fixed largest_file.c to accept EINVAL
  as well as EFBIG as described in write(2).

* link_count_001 - Added nproc to required commands.

* umountall_001 - Updated to use umount -a.

* online_offline_001_* - Pull in OpenZFS change to file_trunc.c
  to make the '-c 0' option run the test in a loop.  Included
  online_offline.cfg file in all test cases.

* rename_dirs_001_pos - Updated to use the rename_dir test binary,
  pkill restricted to exact matches and total runtime reduced.

* slog_013_neg, write_dirs_002_pos - No changes required.

* slog_013_pos.ksh - Updated to use losetup under Linux.

* slog_014_pos.ksh - ZED will not be running, manually degrade
  the damaged vdev as expected.

* nopwrite_varying_compression, nopwrite_volume - Forced pool
  sync with sync_pool to ensure up to date property values.

* Fixed typos in ZED log messages.  Refactored zed_* helper
  functions to resolve all-syslog exit=1 errors in zedlog.

* zfs_copies_005_neg, zfs_get_004_pos, zpool_add_004_pos,
  zpool_destroy_001_pos, largest_pool_001_pos, clone_001_pos.ksh,
  clone_001_pos, - Skip until layering pools on zvols is solid.

* largest_pool_001_pos - Limited to 7eb pool, maximum
  supported size in 8eb-1 on Linux.

* zpool_expand_001_pos, zpool_expand_003_neg - Requires
  additional support from the ZED, updated skip reason.

* zfs_rollback_001_pos, zfs_rollback_002_pos - Properly cleanup
  busy mount points under Linux between test loops.

* privilege_001_pos, privilege_003_pos, rollback_003_pos,
  threadsappend_001_pos - Skip with log_unsupported.

* snapshot_016_pos - No changes required.

* snapshot_008_pos - Increased LIMIT from 512K to 2M and added
  sync_pool to avoid false positives.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6128
2017-05-22 12:34:32 -04:00
Alek P bec1067d54 Implemented zpool sync command
This addition will enable us to sync an open TXG to the main pool
on demand. The functionality is similar to 'sync(2)' but 'zpool sync'
will return when data has hit the main storage instead of potentially
just the ZIL as is the case with the 'sync(2)' cmd.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6122
2017-05-19 12:33:11 -07:00
Tony Hutter 4a283c7f77 Force fault a vdev with 'zpool offline -f'
This patch adds a '-f' option to 'zpool offline' to fault a vdev
instead of bringing it offline.  Unlike the OFFLINE state, the
FAULTED state will trigger the FMA code, allowing for things like
autoreplace and triggering the slot fault LED.  The -f faults
persist across imports, unless they were set with the temporary
(-t) flag.  Both persistent and temporary faults can be cleared
with zpool clear.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6094
2017-05-19 12:30:16 -07:00
Brian Behlendorf 8c54ddd33a Enable additional test cases
Enable additional test cases, in most cases this required a few
minor modifications to the test scripts.  In a few cases a real
bug was uncovered and fixed.  And in a handful of cases where pools
are layered on pools the test case will be skipped until this is
supported.  Details below for each test case.

* zpool_add_004_pos - Skip test on Linux until adding zvols to pools
  is fully supported and deadlock free.

* zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't
  relevant for Linux.  The find_vfstab_dev, find_mnttab_dev, and
  save_dump_dev functions were updated accordingly for Linux.  Add
  O_EXCL to the in-use check to prevent the -f (force) option from
  working for mounted filesystems and improve the resulting error.

* zpool_add_006_pos - Update test case such that it doesn't depend
  on nested pools.  Switch to truncate from mkfile to reduce space
  requirements and speed up the test case.

* zpool_clear_001_pos - Speed up test case by filling filesystem to
  25% capacity.

* zpool_create_002_pos, zpool_create_004_pos - Use sparse files for
  file vdevs in order to avoid increasing the partition size.

* zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with
  similar redundancy.  Updating the valid_args and forced_args cases.

* zpool_create_008_pos - Disable overlapping partition portion.

* zpool_create_011_neg - Fix to correctly create the extra partition.
  Modified zpool_vdev.c to use fstat64_blk() wrapper which includes
  the st_size even for block devices.

* zpool_create_012_neg - Updated to properly find swap devices.

* zpool_create_014_neg, zpool_create_015_neg - Updated to use
  swap_setup() and swap_cleanup() wrappers which do the right thing
  on Linux and Illumos.  Removed '-n' option which succeeds under
  Linux due to differences in the in-use checks.

* zpool_create_016_pos.ksh - Skipped test case isn't useful.

* zpool_create_020_pos - Added missing / to cleanup() function.
  Remove cache file prior to test to ensure a clean environment
  and avoid false positives.

* zpool_destroy_001_pos - Removed test case which creates a pool on
  a zvol.  This is more likely to deadlock under Linux and has never
  been completely supported on any platform.

* zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux.
  Mount point must not be busy in order to unmount them.

* zfs_destroy_001_pos - Handle EBUSY error which can occur with
  volumes when racing with udev.

* zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux
  until adding zvols to pools is fully supported and deadlock free.
  The test could be modified to use loop-back devices but it would
  be preferable to use the test case as is for improved coverage.

* zpool_export_004_pos - Updated test case to such that it doesn't
  depend on nested pools.  Normal file vdev under /var/tmp are fine.

* zpool_import_all_001_pos - Updated to skip partition 1, which is
  known as slice 2, on Illumos.  This prevents overwriting the
  default TESTPOOL which was causing the failure.

* zpool_import_002_pos, zpool_import_012_pos - No changes needed.

* zpool_remove_003_pos - No changes needed

* zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed
  by upstream OpenZFS commit 3b7f360.

* zpool_upgrade_007_pos - Disabled in test case due to known failure.
  Opened issue https://github.com/zfsonlinux/zfs/issues/6112

* zvol_misc_002_pos - Updated to to use ext2.

* zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos,
  zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, these
  test case could be updated to use Linux's crash dump facility.

* zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers.
  File creation switched from /tmp to /var/tmp.  Enabled minimal
  useful tests for Linux, skip test cases which aren't applicable.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3484
Issue #5634
Issue #2437
Issue #5202
Issue #4034
Closes #6095
2017-05-11 14:27:57 -07:00
LOLi a3eeab2de6 Add property overriding (-o|-x) to 'zfs receive'
This allows users to specify "-o property=value" to override and
"-x property" to exclude properties when receiving a zfs send stream.
Both native and user properties can be specified.

This is useful when using zfs send/receive for periodic
backup/replication because it lets users change properties such as
canmount, mountpoint, or compression without modifying the source.

References:
   https://www.illumos.org/issues/2745
   https://www.illumos.org/issues/3753

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #1350 
Closes #5349
2017-05-09 16:21:09 -07:00
Giuseppe Di Natale 3e2ecae01c Fix coverity defects: CID 161638
CID 161638: Resource leak (RESOURCE_LEAK)

Ensure the string array in print_zpool_script_help
is freed in cases when there is an error.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6111
2017-05-09 11:34:19 -07:00
Gvozden Neskovic c17486b217 Add missing *_destroy/*_fini calls
The proposed debugging enhancements in zfsonlinux/spl#587
identified the following missing *_destroy/*_fini calls.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #5428
2017-05-04 19:26:28 -04:00
LOLi dddef7d600 More ashift improvements
This commit allow higher ashift values (up to 16) in 'zpool create'

The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.

Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.

Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.

Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2024 
Closes #4205 
Closes #4740 
Closes #5763
2017-05-03 09:31:05 -07:00
LOLi e7fbeb606a Add zfs_nicebytes() to print human-readable sizes
* Add zfs_nicebytes() to print human-readable sizes

Some 'zfs', 'zpool' and 'zdb' output strings can be confusing to the
user when no units are specified. This add a new zfs_nicenum_format
"ZFS_NICENUM_BYTES" used to print bytes in their human-readable form.

Additionally, update some test cases to use machine-parsable 'zfs get'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2414 
Closes #3185 
Closes #3594 
Closes #6032
2017-05-02 13:43:53 -07:00
Dan Kimmel a7004725d0 OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7628 - create long versions of ZFS send / receive options

Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: bunder2015 <omfgbunder@gmail.com>
Ported-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Most of 7252 was already picked up during ABD work.  This
  commit represents the gap from the final commit to openzfs.
- Fixed split_large_blocks check in do_dump()
- An alternate version of the write_compressible() function was
  implemented for Linux which does not depend on fio.  The behavior
  of fio differs significantly based on the exact version.
- mkholes was replaced with truncate for Linux.

OpenZFS-issue: https://www.illumos.org/issues/7252
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5602294
Closes #6067
2017-04-26 12:31:43 -07:00
DeHackEd 5034557bdd Fix 'zpool iostat -v' cache and log output
Fixes formatting errors from commit d6418de057

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes #6060
2017-04-24 10:33:28 -07:00
Tony Hutter b717b11cb0 Fix shellcheck warning in pre-baked script
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6055
2017-04-24 09:31:39 -07:00
Tony Hutter d6418de057 Prebaked scripts for zpool status/iostat -c
This patch updates the "zpool status/iostat -c" commands to only run
"pre-baked" scripts from the /etc/zfs/zpool.d directory (or wherever
you install to).  The scripts can only be run from -c as an unprivileged
user (unless the ZPOOL_SCRIPTS_AS_ROOT environment var is
set by root).  This was done to encourage scripts to be written is such
a way that normal users can use them, and to be cautious.  If your
script needs to run a privileged command, consider adding the
appropriate line in /etc/sudoers.  See zpool(8) for an example of how
to do this.

The patch also allows the scripts to output custom column names.  If
the script outputs a line like:

name=value

then "name" is used for the column name, and "value" is its value.
Multiple columns can be specified by outputting multiple lines.  Column
names and values can have spaces.  If the value is empty, a dash (-) is
printed instead.

After all the "name=value" lines are read (if any), zpool will take the
next the next line of output (if any) and print it without a column
header.  After that, no more lines will be processed. This can be
useful for printing errors.

Lastly, this patch also disables the -c option with the latency and
request size histograms, since it produced awkward output and made the
code harder to maintain.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5852
2017-04-21 09:27:04 -07:00
LOLi 038091fd4f Documentation fixes for zfs(8) and 'zfs' binary
* bookmarks are not supported when sending all intermediary snaps (-I)
* add missing compressed (-c) option to the 'zfs' help and manpage

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6028
2017-04-20 12:12:50 -07:00
Ned Bass 2a152383a2 vdev_id: fix failure due to multipath -l bug
Udev may fail to create the expected symbolic links in
/dev/disk/by-vdev on systems with the
device-mapper-multipath-0.4.9-100.el6 package installed. This affects
RHEL 6.9 and possibly other downstream distributions.

That version of the multipath command may incorrectly list a drive
state as "unkown" instead of "running". The issue was introduced
in the patch for https://bugzilla.redhat.com/show_bug.cgi?id=1401769

The vdev_id udev helper uses the state reported by "multipath -l" to
detect an online component disk of a multipath device in order to
resolve its physical slot and enclosure. Changing the command
invocation to "multipath -ll" works around the above issue by causing
multipath to consult additional sources of information to determine
the drive state.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6039
2017-04-20 12:10:55 -07:00
LOLi 587e228a6f Allow bookmark short name in 'zfs bookmark'
This lets users create a bookmark from the command line by its name
only, without the need to specify the dataset path which is extacted
from the snapshot parameter.

These commands are now equivalent:

   zfs bookmark poolname/fs@snap poolname/fs#bookmark
   zfs bookmark @snap poolname/fs#bookmark
   zfs bookmark poolname/fs@snap \#bookmark

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3665 
Closes #6027
2017-04-20 12:09:40 -07:00
Richard Yao 066753103f OpenZFS 6392 - zdb: introduce -V for verbatim import
Authored by: Richard Yao <ryao@gentoo.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
  This was already implemented in ZFS on Linux. This patch
  is to resolved the deltas present in our version.

OpenZFS-issue: https://www.illumos.org/issues/6392
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de
Closes #6020
2017-04-18 09:50:15 -07:00
Alan Somers a5c3a1efaf OpenZFS 7900 - zdb shouldn't print the path of a znode at verbosity < 5
Authored by: Alan Somers <asomers@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

There are two reasons:
1) Finding a znode's path is slower than printing any other znode
   information at verbosity < 5.
2) On a corrupted pool like the one mentioned below, zdb will crash when it
   tries to determine the znode's path. But with this patch, zdb can still
   extract useful information from such pools.

OpenZFS-issue: https://www.illumos.org/issues/7900
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2b0dee1
Closes #6016
2017-04-14 11:11:28 -07:00
Brian Behlendorf a44e7faa6c OpenZFS 6410 - teach zdb to perform object lookups by path
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Replaced zdb.8 with upstream mdoc zdb.1m version.  Updated to
  include Linux specific features: -V verbatium imports and
  improved label printing (-u, and -l).
- Minor changes to `zdb -h` output to honor 80 character limit.

OpenZFS-issue: https://www.illumos.org/issues/6410
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1
Closes #6006
2017-04-13 09:40:56 -07:00
Giuseppe Di Natale a167aa7cd4 Invalidate cache during a zpool labelclear
Be sure to invalidate a vdev's cache before performing
a zpool labelclear. There are cases where the cache is
stale because we did some operation that bypassed it,
and since we are doing an open with only O_RDWR, we
should invalidate it to be safe.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6009
2017-04-13 09:13:51 -07:00
Richard Yao bc482ac2ed Add missing includes to zed_log.c
GCC 4.9.4 complains about implicit function declarations when building
against musl on Gentoo.

zed_log.c: In function ‘zed_log_pipe_open’:
zed_log.c:69:7: warning: implicit declaration of function ‘getpid’
       (int)getpid());
       ^
zed_log.c:71:2: warning: implicit declaration of function ‘pipe’
  if (pipe(_ctx.pipe_fd) < 0)
  ^
zed_log.c: In function ‘zed_log_pipe_close_reads’:
zed_log.c:90:2: warning: implicit declaration of function ‘close’
  if (close(_ctx.pipe_fd[0]) < 0)
  ^
zed_log.c: In function ‘zed_log_pipe_wait’:
zed_log.c:141:3: warning: implicit declaration of function ‘read’
   n = read(_ctx.pipe_fd[0], &c, sizeof (c));

The [-Wimplicit-function-declaration] at the end of each warning has
been removed to meet comment style requirements.

The man pages say to include <sys/types.h> and <unistd.h>. Doing that
silences the warnings.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #5993
2017-04-12 08:57:25 -07:00
Yuri Pankov dbb38f6605 OpenZFS 6865 - want zfs-tests cases for zpool labelclear command
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Updated 'zpool labelclear' and 'zdb -l' such that they attempt
  to find a vdev given solely its short name.  This behavior is
  consistent with the upstream OpenZFS code and the test cases
  depend on it.  The actual implementation differs slightly due
  to device naming conventions on Linux.
- auto_online_001_pos, auto_replace_001_pos and add-o_ashift
  test cases updated to expect failure when no label exists.
- read_efi_label() and zpool_label_disk_check() are read-only
  operations and should use O_RDONLY at open time to enforce this.
- zpool_label_disk() and zpool_relabel_disk() write the partition
  information using O_DIRECT an fsync() and page cache invalidation
  to ensure a consistent view of the device.
- dump_label() in zdb should invalidate the page cache in order
  to get the authoritative label from disk.

OpenZFS-issue: https://www.illumos.org/issues/6865
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95076c
Closes #5981
2017-04-11 09:54:39 -07:00
Giuseppe Di Natale f02ad0dc75 Fix coverity defects: CID 161288
CID 161288:  Null pointer dereferences  (REVERSE_INULL)

Ensure physpath != NULL before the strcmp.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5974
2017-04-06 13:18:22 -07:00
Sydney Vanda 7a4500a101 Added auto-replace FMA test for the ZFS Test Suite
Also included are updates to auto-online test

Automated auto-replace test to go along with ZED FMA integration
(PR 4673) auto-replace_001.pos works using a scsi_debug device
(the only usable virtual device currently due to whole_disk var
needing to be set)

Functionality for automated FMA auto-replace test to work with
scsi_debug devs:  Some functionality/exceptions needed to be
added for automation of auto-replace to work correctly.

In the test an alias vdev_id rule is added for any scsi_debug
device which sets the phys_path="scsidebug" after a udevadm
trigger command.

A symlink is created for the vdev_id.conf file (in /etc/zfs/ by
default) to be used in-tree for the test suite
(/var/tmp/zfs/vdev_id.conf).  "./scripts/zfs-helpers.sh -i" needs
to be run before fault tests in the ZTS (to use udev rules in-tree)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Closes #5944
2017-04-05 16:18:19 -07:00
Håkan Johansson 6ba1ce9ee9 Accept raidz and mirror with similar redundancy
Allow a pool to be created with both raidz and mirror members,
without giving -f, as long as they have matching redundancy.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5915
2017-04-05 15:21:13 -07:00
Giuseppe Di Natale 6b0ecd2f2f Fix coverity defects: CID 161264
CID 161264:  Uninitialized variables  (UNINIT)

In _zed_event_add_nvpair, when handling DATA_TYPE_UINT64,
we should be using i64 throughout the entire case.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5964
2017-04-05 13:21:10 -07:00
N Clark bcdb96a3e1 Additional Information for Zedlets
* Add ZPOOL pool state to zfs_post_common to
  allow differentiation between export and destroy
  by zedlets.

* Add pool name as standard export  This ensures
  pool name is exported to zedlets.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Closes #5942
2017-04-03 14:23:02 -07:00
Gvozden Neskovic 84c07adadb Remove dependency on linear ABD
Wherever possible it's best to avoid depending on a linear ABD.
Update the code accordingly in the following areas.

- vdev_raidz
- zio, zio_checksum
- zfs_fm
- change abd_alloc_for_io() to use abd_alloc()

Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #5668
2017-03-29 12:24:51 -07:00
LOLi ff61d1a495 Check ashift validity in 'zpool add'
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.

Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #5878
2017-03-28 17:21:11 -07:00
Sen Haerens 7c4f1514ff Fix "undefined reference to xdr_control" when building raidz_test cmd
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: SenH <sen@senhaerens.be>
Closes #5933
2017-03-28 10:47:50 -07:00
Brian Behlendorf b25c5b0639 Fix undefined reference to `libzfs_fru_compare'
Add trivial libzfs_fru_compare() function which can be used when
HAVE_LIBTOPO is not defined.  The only caller is find_vdev() and
this function should never be reached because search_fru must be
NULL unless HAVE_LIBTOPO is defined.

Rename _HAS_FMD_TOPO to existing HAVE_LIBTOPO which was
originally added for this purpose.  This macro will never be defined.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5402
Closes #5909
2017-03-23 18:24:09 -07:00
Brian Behlendorf 56a6054d55 Fix `zpool status -v` error message
When a pool is suspended it's impossible to read the list
of damaged files from disk.  This would result in a generic
misleading "insufficient permissions" error message.

Update zpool_get_errlog() to use the standard zpool error
logging functions to generate a useful error message.  In
this case:

  errors: List of errors unavailable: pool I/O is currently suspended

This patch does not address the related issue of potentially
not being able to resume a suspend pool when the underlying
device names have changed.

Additionally, remove the error handling from zfs_alloc()
in zpool_get_errlog() for readability since this function
can never fail.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4031
Closes #5731 
Closes #5907
2017-03-22 18:08:55 -07:00
Brian Behlendorf f298b24ddf Rename zfs_* functions
Several functions were renamed when ZFS was originally ported to
Linux.  Revert the code to the original names to minimize the
delta with upstream OpenZFS.

  zfs_sb_teardown -> zfsvfs_teardown
  zfs_sb_create -> zfsvfs_create
  zfs_sb_setup -> zfsvfs_setup
  zfs_sb_free -> zfsvfs_free
  get_zfs_sb -> getzfsvfs
  zfs_sb_hold -> zfsvfs_hold
  zfs_sb_rele -> zfsvfs_rele

  zfs_sb_prune_aliases  -> zfs_prune_aliases (Linux-only)
  zfs_sb_prune -> zfs_prune (Linux only)

Align the zfs_vnops.h and zfs_vfsops.h with upstream as much
as possible.  Several prototypes were removed and those that
remain were reordered.

Move the EXPORT_SYMBOL lines to the end of the source files
for consistency with the other source files.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-10 09:51:35 -08:00
Giuseppe Di Natale c3d0438173 Correct arc_summary and dbufstat python style
arc_summary and dbufstat should have two spaces
after their last function definitions.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5881
2017-03-09 10:21:59 -08:00
Giuseppe Di Natale c552fbc5f0 Enable shellcheck to run for select scripts
Enable shellcheck to run on zed scripts,
paxcheck.sh, zfs-tests.sh, zfs.sh, and zloop.sh.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5812
2017-03-09 10:20:15 -08:00
Olaf Faaland 3c9e0d673e Dump unique configurations and Uberblocks in zdb -lu
For zdb -l, detect when the configuration nvlist in some label l (l>0)
is the same as a configuration already dumped.  If so, do not dump it.

Make a similar check when dumping Uberblocks for zdb -lu.  Check whether
a label already dumped contains an identical Uberblock.  If so, do not
dump the Uberblock.

When dumping a configuration or Uberblock, state which labels it is
found in (0-3), for example: labels = 1 2 3

Detecting redundant uberblocks or configurations is accomplished by
calculating checksums of the uberblocks and the packed nvlists
containing the configuration.

If there is nothing unique to be dumped for a label (ie the
configuration and uberblocks have checksums matching those already
dumped) print nothing for that label.

With additional l's or u's, increase verbosity as follows:

-l      Dump each unique configuration only once.
        Indicate which labels it appears in.
-ll     In addition, dump label space usage stats.
-lll    Dump every configuration, unique or not.

-u      Dump each unique, valid, uberblock only once.
        Indicate which labels it appears in.
-uu     In addition, state which slots are invalid.
-uuu    Dump every uberblock, unique or not.
-uuuu   Dump the uberblock blockpointer (used to be -uuu)

Make exit values conform to the manual page.  Failing to unpack a
configuration nvlist is considered an error, as well as failing to open
or read from the device.

Add three tests, zdb_00{3,4,5}_pos to verify the above functionality.

An example of the output:
	------------------------------------
	LABEL 0
	------------------------------------
	    version: 5000
	    name: 'pool'
	    state: 1
	    txg: 880
	    < ... redacted ... >
	    features_for_read:
		com.delphix:hole_birth
		com.delphix:embedded_data
	    labels = 0
	    Uberblock[0]
		magic = 0000000000bab10c
		version = 5000
		txg = 0
		guid_sum = 3038694082047428541
		timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017
		labels = 0 1 2 3
	    Uberblock[4]
		magic = 0000000000bab10c
		version = 5000
		txg = 772
		guid_sum = 9045970794941528051
		timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017
		labels = 0
	    < ... redacted ... >
	------------------------------------
	LABEL 1
	------------------------------------
	    version: 5000
	    name: 'pool'
	    state: 1
	    txg: 14
	    < ... redacted ... >
		com.delphix:embedded_data
	    labels = 1 2 3
	    Uberblock[4]
		magic = 0000000000bab10c
		version = 5000
		txg = 4
		guid_sum = 7793930272573252584
		timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017
		labels = 1 2 3
	    < ... redacted ... >

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5738
2017-03-06 16:01:45 -08:00
Christopher Voltz 100790a8dd Retry setting LED
If the LED is being accessed by another process when we try to update
it, the update will be lost. Add a retry loop which will read the state
of the LED and update it until the LED is in the correct state. The
number of times this will occur is limited to ensure that the ZEDlet
won't hang ZED.

Refactor to remove duplication so setting of the LED occurs in only one
place.

Cleanup a couple of the warnings generated by shellcheck which weren't
the result of specific choices by the author. Several notes and warnings
are still present but removing them would make the code less clear or
require adding lines to tell shellcheck to ignore the warning.

Remove ",i" from the documentation at the top of the file which appears
to be a typographic error.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Christopher Voltz <christopher.voltz@hpe.com>
Closes #5795
2017-02-16 13:41:48 -08:00
Christopher Voltz f9caf08a74 Fix broken URL
Google moved their style guides to GitHub. Update the shell style guide
URL to the new location.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christopher Voltz <christopher.voltz@hpe.com>
Closes #5797
2017-02-15 11:15:38 -08:00
Tony Hutter b291029e86 Enclosure LED fixes
- Pass $VDEV_ENC_SYSFS_PATH to 'zpool [iostat|status] -c' to include
  enclosure LED sysfs path.

- Set LEDs correctly after import.  This includes clearing any erroniously
  set LEDs prior to the import, and setting the LED for any UNAVAIL drives.

- Include symlink for vdev_attach-led.sh in Makefile.am.

- Print the VDEV path in all-syslog.sh, and fix it so the pool GUID actually
  prints.    

Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5716 
Closes #5751
2017-02-10 16:09:45 -08:00
Don Brady cd5083c00c Fix coverity defects: CID 155928
CID 155928: Integer handling issues (DIVIDE_BY_ZERO)

In the current vdev label, the leaf count is always non-zero
but it doesn't hurt to check the count for future proofing.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #5749
2017-02-07 09:29:47 -08:00
Don Brady 35a357a9ef OpenZFS 6866 - zdb -l non-zero status if no label
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Don Brady <don.brady@intel.com>

OpenZFS-issue: https://www.illumos.org/issues/6866
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3e4fae5
Closes #5730 

Porting Notes:
- Omitted the illumos-specific `/dev/dsk` and `/dev/rdsk`
path conversions since they don't apply on linux.
2017-02-03 14:18:28 -08:00
Giuseppe Di Natale d21d5b8248 OpenZFS 4521 - zfstest is trying to execute evil "zfs unmount -a"
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
- Correctly set __ZFS_POOL_RESTRICT in inherit_001_pos

OpenZFS-issue: https://www.illumos.org/issues/4521
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8808ac5
Closes #5674
2017-02-03 13:24:44 -08:00
Don Brady 96f1b347f8 Add nvlist payload stats for zdb -ll dump
When dumping the ZFS vdev label with 'zdb -ll', also dump
some nvlist stats to help analyze the current footprint.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #5724
2017-02-02 14:03:48 -08:00
Giuseppe Di Natale fc386db191 Remove lint ifdef checks in zdb and dbuf
This is effectively dead code for the Linux implementation which can
be removed to improve readability.  We want to linter to check the
real production/debug build as much as possible.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5722
2017-02-01 16:47:04 -08:00
David Quigley 2fe36b0bfb Use fletcher_4 routines natively with `abd_iterate_func()`
This patch adds the necessary infrastructure for ABD to make use
of the vectorized fletcher 4 routines.

- export ABD compatible interface from fletcher_4
- add ABD fletcher_4 tests for data and metadata ABD types.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #5589
2017-02-01 09:34:22 -08:00
George Melikov a873815b95 OpenZFS 7742 - zfs send wrong error message with invalid long opts
There are two cases:

    1. if an invalid flag is passed, and
    2. if a valid flag is not given a parameter.

In the case of (1), the flag is either short or long. For short flags,
optopt contains the character of the flag. For long, it contains zero,
and we can access the long flag using argv and optind.

In the case of (2), if the flag is short, optopt contains the character
of the flag. If the flag is long, the value in the 4th column of the
long_options table, for that flag, is returned.

We could case over all those values, or we could simply use argv and
optind again.

Note that in the case of something like `--resume`, which is also `-t`,
"t" will be returned if an argument is not provided; so the error
message will say `'t': argument not provided` or similar. This could be
fixed by making it so long and short options don't use the same
character flag, and then combining them in the switch/case statement,
but I didn't think the ugliness of the code would be worth the small
usability enhancement.

Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7742
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6d69b40
Closes #5702
2017-01-31 14:41:23 -08:00
Giuseppe Di Natale d69a321e56 OpenZFS 7545 - zdb should disable reference tracking
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes: Moved reference_tracking_enable and
reference_history outside of ZFS_DEBUG.

OpenZFS-issue: https://www.illumos.org/issues/7545
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4dd77f9
Closes #5701
2017-01-31 14:36:35 -08:00
George Melikov ed828c0c37 OpenZFS 7280 - Allow changing global libzpool variables in zdb and ztest through command line
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7280
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0e60744
Closes #5676
2017-01-31 10:13:10 -08:00
George Melikov 456079d48d OpenZFS 7502 - ztest should run zdb with -G (debug mode)
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7502
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3c65d1
Closes #5677
2017-01-30 11:34:36 -08:00
George Melikov fa603f8233 OpenZFS 7277 - zdb should be able to print zfs_dbgmsg's
Porting notes:
- 'zfs_dbgmsg_print()' reintroduced to userspace.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7277
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bdd2f
Closes #5684
2017-01-28 12:16:43 -08:00
George Melikov aeacdefedc OpenZFS 7386 - zfs get does not work properly with bookmarks
Authored by: Marcel Telka <marcel@telka.sk>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7386
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/edb901a
Closes #5666
2017-01-26 14:42:15 -08:00
George Melikov 2014c09f64 OpenZFS 7163 - ztest failures due to excess error injection
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7163
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f34284d
Closes #4484 
Closes #5661
2017-01-26 12:34:29 -08:00
George Melikov dc1fbc43be OpenZFS 7253 - ztest failure: dsl_destroy_head(name) == 0 (0x10 == 0x0), file ../ztest.c, line 3235 (#5660)
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: - Matthew Ahrens <mahrens@delphix.com>
Reviewed by: - Paul Dagnelie <pcd@delphix.com>
Approved by: - Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7253
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/754998c
Closes #5660
2017-01-26 12:32:36 -08:00
Brian Behlendorf 546d32ca10 OpenZFS 7147 - ztest: ztest_ddt_repair fails with ztest_pattern_match assertion
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by:  Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7147
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aab80726
Closes #5652
2017-01-26 12:30:43 -08:00
George Melikov 935550f1bb OpenZFS 6872 - zfs libraries should not allow uninitialized variables
Porting notes:
- Many changes were already made in ZoL (for ex. in d4ed66734).

Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/6872
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f83b46b
Closes #5640
2017-01-24 09:23:34 -08:00
George Melikov e2a65adbb8 OpenZFS 6871 - libzpool implementation of thread_create should enforce length is 0
Porting notes:
- Several direct callers of zk_thread_create() are passing TS_RUN for the
length.  The `len` and `state` were inverted,this commit fixes them.

Authored by: Eli Rosenthal <eli.rosenthal@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov mail@gmelikov.ru

OpenZFS-issue: https://www.illumos.org/issues/6871
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8fc9228
Closes #5621
2017-01-24 09:13:49 -08:00
George Melikov a39ce90660 OpenZFS 6880 - zdb incorrectly reports feature count mismatch when feature is disabled
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/6880
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c5d1600
Closes #5641
2017-01-24 08:59:08 -08:00
George Melikov 4ea3f86426 codebase style improvements for OpenZFS 6459 port 2017-01-22 13:25:40 -08:00
Brian Behlendorf beabc5e46c Fix unused variable warning
The local mg variable is unused in non-debug builds.
Wrap the variable in ASSERTV() so that it's only present
in the debug build.  Introduced by OpenZFS 7303.

Reviewed-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5616
2017-01-19 17:09:04 -08:00
Brian Behlendorf 648a09adc2 OpenZFS 6550 - cmd/zfs: cleanup gcc warnings
Porting Notes:
- Many of the fixes proposed by this patch were already applied.
In the cases where a different but equivalent fix was made the
code was updated with the OpenZFS version to minimize differences.

Authored by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6550
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c16bcc4
Closes #5591
2017-01-17 14:45:02 -08:00
Brian Behlendorf 8e89657956 OpenZFS 6551 - cmd/zpool: cleanup gcc warnings
Porting Notes:
- Many of the fixes proposed by this patch were already applied.
In the cases where a different but equivalent fix was made the
code was updated with the OpenZFS version to minimize differences.
- The zpool_get_vdev_by_name() function was previously removed
by commit  235db0a.

Authored by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6551
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b327cd3
Closes #5590
2017-01-17 14:42:56 -08:00
Don Brady 4e21fd060a OpenZFS 7303 - dynamic metaslab selection
This change introduces a new weighting algorithm to improve
metaslab selection. The new weighting algorithm relies on the
SPACEMAP_HISTOGRAM feature. As a result, the metaslab weight
now encodes the type of weighting algorithm used (size-based
vs segment-based).

Porting Notes: The metaslab allocation tracing code is conditionally
removed on linux (dependent on mdb debugger).

Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov pavel.zakharov@delphix.com
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Don Brady <don.brady@intel.com>

OpenZFS-issue: https://www.illumos.org/issues/7303
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d5190931bd
Closes #5404
2017-01-12 11:52:56 -08:00
George Melikov 5727b00e06 OpenZFS 6637 - replacing "dontclose" with "should_close"
Authored by: David Schwartz <dschwartz783@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

I find that this is a lot easier to read. "not don't close" is somewhat tough on the eyes.

OpenZFS-issue: https://www.illumos.org/issues/6637
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d189620
Closes #5572
2017-01-12 11:25:27 -08:00
George Melikov e9aa730c49 OpenZFS 6328 - Fix cstyle errors in zfs codebase
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/6328
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/9a686fb
Closes #5579
2017-01-12 09:42:11 -08:00
Johnny Stenback 5eac94bffd Fix TypeError: unorderable types: str() > int() in arc_summary.py
Running arc_summary.py with a l2arc cache device around produces
the following error:

  Traceback (most recent call last):
    File "/usr/bin/arc_summary.py", line 1148, in <module>
      main()
    File "/usr/bin/arc_summary.py", line 1144, in main
      page(Kstat)
    File "/usr/bin/arc_summary.py", line 724, in _l2arc_summary
      arc["l2_arc_evicts"]["reading"] > 0:
  TypeError: unorderable types: str() > int()

This is due to arc["l2_arc_evicts"]['lock_retries'] and
arc["l2_arc_evicts"]["reading"] both being strings, returned
from fHits() earlier. Rather than adding them up and checking
if the result is > 0, this checks if either string is != '0'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5538
2017-01-03 12:29:23 -06:00
ka7 4e33ba4c38 Fix spelling
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5547 
Closes #5543
2017-01-03 11:31:18 -06:00
GeLiXin 547c593661 Fix coverity defects: CID 147587
CID 147587: Out-of-bounds read

Future changes may cause an array overrun of 4096 bytes at byte
offset 4096 by dereferencing pointer dstp.  Adding this additional
check ensures correctness.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes #5297
2016-12-21 11:27:24 -08:00
cao 58bf046ab3 Fix coverity defects: CID 155008
CID 155008:  Resource leaks  (RESOURCE_LEAK)

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5500
2016-12-19 10:26:15 -08:00
Tony Hutter 1528bfdb14 Don't run 'zpool iostat -c CMD' command on all vdevs, if vdevs specified
zpool iostat allows you to specify only certain vdevs to display.
Currently, if you run 'zpool iostat -c CMD vdev1 vdev2 ...'
on specific vdevs, it will actually run the command on *all* vdevs,
and just display the results for the vdevs you specify.  This patch
corrects the behavior to only run the command on the specified vdevs,
and also enables the zpool_iostat_005_pos.ksh tests.
    
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5443
2016-12-16 16:10:45 -08:00
cao 81eb8a1fbb Fix coverity defects: CID 147534
CID 147534: Negative array index read

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5467
2016-12-16 09:11:17 -08:00
Brian Behlendorf 02730c333c Use cstyle -cpP in `make cstyle` check
Enable picky cstyle checks and resolve the new warnings.  The vast
majority of the changes needed were to handle minor issues with
whitespace formatting.  This patch contains no functional changes.

Non-whitespace changes are as follows:

* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5465
2016-12-12 10:46:26 -08:00
Håkan Johansson 5f20c145df Do not force VDEV_NAME_TYPE_ID in max_width()
Do not force VDEV_NAME_TYPE_ID in max_width(), instead add it
in the relevant calls to max_width().

The first location of max_width() where VDEV_NAME_TYPE_ID is
now added in show_import() is followed by print_import_config() and
print_logs().  Both these print children vdev names that have been
retrieved using an explicit VDEV_NAME_TYPE_ID added.

The second location is in status_callback().  This is followed by
print_status_config(), print_logs(), print_l2cache(), and
print_spares(). For l2cache and spares it should not matter as there
are no mirror-X or raidz-X involved.  print_status_config() as above
retrieves the name using explicit VDEV_NAME_TYPE_ID before
calling itself to print children.

The call of max_width() in get_namewidth() is not changed, as this is
used by zpool_do_iostat(), followed by print_iostat(), which does not
add VDEV_NAME_TYPE_ID.

Overall, we should consider adding VDEV_NAME_TYPE_ID to the
relevant name_flags / cb_name_flags fields, and remove the explicit
adding in called routines.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5401
2016-11-30 17:46:16 -07:00
Brian Behlendorf 7657defc48 Introduce ARC Buffer Data (ABD)
ZFS currently uses ARC buffers which are backed by virtual memory.
While functional, there are some major problems with this approach
which can be observed on all OpenZFS platforms.  ABD was designed
to address these issues and includes contributions from OpenZFS
developers from multiple platforms.

While all OpenZFS platforms will benefit from ABD this functionality
is critical for Linux.  Unlike the other OpenZFS platforms the Linux
kernel discourages extensive use of virtual memory.  The provided
interfaces are not optimized for frequent allocations from the virtual
address space.  To maintain good performance a kmem cache is
used which contains relatively long lived slabs backed by virtual
memory.  The downside to the approach is that those slabs can
become highly fragmented resulting in an inefficient use of memory.

Another issue is that on 32-bit systems the available virtual
address space in the kernel is only a small fraction of total
system memory.  This means the ARC size is highly constrained
which hurts performance and make allocating memory difficult
and OOMs more likely.

ABD is designed to address these issues by using scatter lists
of pages for data buffers.  This removes the need for slabs
which resolves the fragmentation issue.  It also allows high
memory pages to be allocated which alleviates the virtual
address space pressure on 32-bit systems.

For metadata buffers, which are small, linear ABDs are allocated
from the slab.  This is preferable because there are many places
in the code which expect to be able to read from a given offset
in the buffer.  Using linear ABDs means none of that code needs
to be modified.  The majority of these buffers are allocated with
kmalloc so there's minimal impact of the virtual address space.

Tested-by: Kash Pande <kash@tripleback.net>
Tested-by: kernelOfTruth <kerneloftruth@gmail.com>
Tested-by: RageLtMan <rageltman@sempervictus>
Tested-by: DHE <git@dehacked.net>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3441 
Closes #5135
2016-11-30 14:48:16 -07:00
luozhengzheng 2d44b04b79 Fix coverity defects: CID 154591
CID 154591: Incorrect expression (SIZEOF_MISMATCH)

Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5435
2016-11-30 10:48:01 -07:00
Gvozden Neskovic 65d71d4212 ABD raidz avx512f support
Implement shift based multiplication for 512f. Higher IPC over lookup based
methods yields up to 40% better performance on the current hardware.

Results on Xeon Phi(TM) CPU 7210:
implementation   gen_p           gen_pq          gen_pqr         rec_p           rec_q           rec_r           rec_pq          rec_pr          rec_qr          rec_pqr
original         142232671       24411492        12948205        283053705       22348167        4215911         9171609         2265548         2378370         1648495
scalar           295711162       49851491        33253815        293198109       88179448        61866752        27941684        25764416        17384442        12138153
sse2             410055998       199642658       117973654       406240463       152688682       121092250       84968180        79291076        47473657        20779719
ssse3            411641595       199669571       117937647       406211024       137638508       117050346       81263322        76120405        46281559        32696722
avx2             616485806       311515332       188595628       605455115       260602390       230554476       148198817       138800254       92273356        62937819
avx512f          832191523       408509425       253599522       810094481       404325734       317590971       218235687       197204920       133101937       94001219
fastest          avx512f         avx512f         avx512f         avx512f         avx512f         avx512f         avx512f         avx512f         avx512f         avx512f

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
2016-11-29 14:34:33 -08:00
Gvozden Neskovic cbf484f8ad ABD Vectorized raidz
Enable vectorized raidz code on ABD buffers.  The avx512f,
avx512bw, neon and aarch64_neonx2 are disabled in this commit.
With the exception of avx512bw these implementations are
updated for ABD in the subsequent commits.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
2016-11-29 14:34:33 -08:00
David Quigley a6255b7fce DLPX-44812 integrate EP-220 large memory scalability 2016-11-29 14:34:27 -08:00
Tim Chase 616fa7c02b zstreamdump needs to initialize fletcher 4 support
Otherwise, the checksum function pointer isn't initialized.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #5411
2016-11-29 14:47:05 -07:00
Tony Hutter 8720e9e748 Add -c to zpool iostat & status to run command
This patch adds a command (-c) option to zpool status and zpool iostat.  The
-c option allows you to run an arbitrary command on each vdev and display
the first line of output in zpool status/iostat.  The environment vars
VDEV_PATH and VDEV_UPATH are set to the vdev's path and "underlying path"
before running the command.  For device mapper, multipath, or partitioned
vdevs, VDEV_UPATH is the actual underlying /dev/sd* disk.  This can be useful
if the command you're running requires a /dev/sd* device.

The patch also uses /sys/block/<dev>/slaves/ to lookup the underlying device
instead of using libdevmapper.  This not only removes the libdevmapper
requirement at build time, but also allows you to resolve device mapper
devices without being root.  This means that UDEV_UPATH get set correctly
when running zpool status/iostat as an unprivileged user.

Example:

$ zpool status -c 'echo I am $VDEV_PATH, $VDEV_UPATH'

NAME        STATE     READ WRITE CKSUM
mypool      ONLINE       0     0     0
  mirror-0  ONLINE       0     0     0
    mpatha  ONLINE       0     0     0  I am /dev/mapper/mpatha, /dev/sdc
    sdb     ONLINE       0     0     0  I am /dev/sdb1, /dev/sdb

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5368
2016-11-29 14:45:38 -07:00
LOLi 2f71caf2d9 Allow zfs unshare <protocol> -a
Allow `zfs unshare <protocol> -a` command to share or unshare all datasets
of a given protocol, nfs or smb.

Additionally, enable most of ZFS Test Suite zfs_share/zfs_unshare test cases.
To work around some Illumos-specific functionalities ($SHARE/$UNSHARE) some
function wrappers were added around them.

Finally, fix and issue in smb_is_share_active() that would leave SMB shares
exported when invoking 'zfs unshare -a'

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3238 
Closes #5367
2016-11-29 12:22:38 -07:00
Don Brady 0df15db98f Add a statechange notify zedlet
Now that ZED has internal fault diagnosis and the statechange event
is generated for faulted states, we can replace the io-notify and
checksum-notify zedlets with one based on statechange.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #5383
2016-11-10 13:52:59 -08:00
Olaf Faaland 66f801f00a Fix symlinks for {vdev_clear,statechange}-led.sh
These were named in the zed/Makefile.am as vdev_clear-blinkled.sh
and statechange-blinkled.sh causing bad symlinks to be created.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5384
2016-11-09 10:19:43 -08:00
cao 010782be91 Fix coverity defects: CID 147586
CID 147586: function:allow_usage Type:out-of-bounds read

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5364
2016-11-08 17:33:23 -08:00
luozhengzheng 70df4c21c0 Fix coverity defects: 154021
CID 154021: Null pointer dereference

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5380
2016-11-08 14:34:52 -08:00
Don Brady 976246fadd Add illumos FMD ZFS logic to ZED -- phase 2
The phase 2 work primarily entails the Diagnosis Engine and
the Retire Agent modules. It also includes infrastructure
to support a crude FMD environment to host these modules.

The Diagnosis Engine consumes I/O and checksum ereports and
feeds them into a SERD engine which will generate a corres-
ponding fault diagnosis when the SERD engine fires. All the
diagnosis state data is collected into cases, one case per
vdev being tracked.

The Retire Agent responds to diagnosed faults by isolating
the faulty VDEV. It will notify the ZFS kernel module of
the new VDEV state (degraded or faulted). This agent is
also responsible for managing hot spares across pools.
When it encounters a device fault or a device removal it
replaces the device with an appropriate spare if available.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #5343
2016-11-07 15:01:38 -08:00
Tony Hutter 1ad9de6d08 Allow autoreplace even when enclosure LED sysfs entries don't exist
The previous autoreplace code assumed that if you were using autoreplace, then
you also had the enclosure SES driver loaded.  This could lead to autoreplace
not working if the SES driver wasn't loaded, or if it wasn't creating the
proper enclosure_device symlinks (which has happened).  This patch removes
that assumption.

Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5363
2016-11-04 13:34:13 -07:00
Romain Dolbeau 7f547f85fe Add parity generation/rebuild using AVX-512 for x86-64
avx512f should work on all AVX512 hardware, since it only uses
Foundation instructions.

avx512bw should be faster on hardware supporting the AVW512BW
extension. We can use full-width pshufb (instead of relying on the 256
bits AVX2 pshufb). As a side-effect, the code is also unrolled more.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.github@dolbeau.name>
Closes #5219
2016-11-02 12:40:23 -07:00
LOLi e4010f2719 Allow for '-o feature@<feature>=disabled' on the command line
Sometimes it is desirable to specifically disable one or several
features directly on the 'zpool create' command line.

$ zpool create -o feature@<feature>=disabled ...

Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3460 
Closes #5142 
Closes #5324
2016-10-25 16:17:47 -07:00
Tony Hutter 6568379eea Fix statechange-led.sh & unnecessary libdevmapper warning
- Fix autoreplace behaviour on statechange-led.sh script.

ZED sends the following events on an auto-replace:

1. statechange: Disk goes UNAVAIL->ONLINE
2. statechange: Disk goes ONLINE->UNAVAIL
3. vdev_attach: Disk goes ONLINE

Events 1-2 happen when ZED first attempts to do an auto-online.  When that
fails, ZED then tries an auto-replace, generating the vdev_attach event in #3.

In the previous code, statechange-led was only looking at the UNAVAIL->ONLINE
transition to turn off the LED.  It ignored the #2 ONLINE->UNAVAIL transition,
assuming it was just the "old" VDEV going offline.  This is problematic, as
a drive can go from ONLINE->UNAVAIL when it's malfunctioning, and we don't want
to ignore that.

This new patch correctly turns on the fault LED every time a drive becomes
UNAVAIL.  It also monitors vdev_attach events to trigger turning off the LED
when an auto-replaced disk comes online.

- Remove unnecessary libdevmapper warning with --with-config=kernel

This fixes an unnecessary libdevmapper warning when building
--with-config=kernel.  Kernel code does not use libdevmapper, so the warning
is not needed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #2375 
Closes #5312 
Closes #5331
2016-10-25 11:05:30 -07:00
cao aed0e9f3e4 Fix coverity defects: CID 147511, 147513
CID 147511: Type:Dereference before null check
CID 147513: Type:Dereference before null check

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5306
2016-10-24 13:37:38 -07:00
Tony Hutter 1bbd877049 Turn on/off enclosure slot fault LED even when disk isn't present
Previously when a drive faulted, the statechange-led.sh script would lookup
the drive's LED sysfs entry in /sys/block/sd*/device/enclosure_device, and
turn it on.  During testing we noticed that if you pulled out a drive, or if
the drive was so badly broken that it no longer appeared to Linux, that the
/sys/block/sd* path would be removed, and the script could not lookup the
LED entry.

To fix this, this patch looks up the disks's more persistent
"/sys/class/enclosure/X:X:X:X/Slot N" LED sysfs path at pool import.  It then
passes that path to the statechange-led script to use, rather than having the
script look it up on the fly.  This allows the script to turn on/off the slot
LEDs even when the drive is missing.

Closes #5309 
Closes #2375
2016-10-24 10:45:59 -07:00
Tony Hutter 6078881aa1 Multipath autoreplace, control enclosure LEDs, event rate limiting
1. Enable multipath autoreplace support for FMA.

This extends FMA autoreplace to work with multipath disks.  This
requires libdevmapper to be installed at build time.

2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online

Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure
LED for a drive when a drive becomes FAULTED/DEGRADED.  Your enclosure must
be supported by the Linux SES driver for this to work.  The enclosure LED
scripts work for multipath devices as well.  The scripts will clear the LED
when the fault is cleared.

3. Rate limit ZIO delay and checksum events so as not to flood ZED

ZIO delay and checksum events are rate limited to 5/sec in the zfs module.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #2449 
Closes #3017 
Closes #5159
2016-10-19 12:55:59 -07:00
GeLiXin 66826e2285 Fix coverity defects: CID 147643, 152204, 49339
CID 147643: Type: String not null terminated
- make sure that the string is null terminated before strlen
  and fprintf.

CID 152204: Type: Copy into fixed size buffer
- since strlcpy isn't availabe here, use strncpy and terminate
  the string manually.

CID 49339: Type: Buffer not null terminated
- since strlcpy isn't availabe here, terminate the string
  manually before fprintf.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes #5283
2016-10-18 10:43:22 -07:00
Håkan Johansson fea33e4e50 Pass status_cbdata_t to print_status_config() and friends
First rename spare_cbdata_t cb -> spare_cb in print_status_config(),
to free up cb.

Using the structure removes the explicit parameters namewidth
and name_flags from several functions.  Also use status_cbdata_t
for print_import_config().  This simplifies print_logs().

Remove the parameter 'verbose' for print_logs().  It does not really
mean verbose, it selected between the print_status_config and
print_import_config() paths.  This selection is now done by
cb_print_config of spare_cbdata_t.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Håkan Johansson <f96hajo@chalmers.se>
Closes #5259
2016-10-17 11:46:35 -07:00
cao 06cf4d9890 Fix coverity defects: CID 147606, 147609
coverity scan CID:147606, Type:resource leak
coverity scan CID:147609, Type:resource leak

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5245
2016-10-12 11:16:47 -07:00
GeLiXin 8c8cf8a2d8 Fix coverity defects: CID 147639
When array is passed as a parameter it degenerates into a
pointer so the sizeof(path) in is_shorthand_path() and always
get return value of 8, instead of the string length we want.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes #5198
2016-10-10 15:30:22 -07:00
Brian Behlendorf 7515f8f63d Fix file permissions
The following new test cases need to have execute permissions set:

  userquota/groupspace_003_pos.ksh
  userquota/userquota_013_pos.ksh
  userquota/userspace_003_pos.ksh
  upgrade/upgrade_userobj_001_pos.ksh
  upgrade/setup.ksh
  upgrade/cleanup.ksh

The following source files accidentally were marked executable:

  lib/libzpool/kernel.c
  lib/libshare/nfs.c
  lib/libzfs/libzfs_dataset.c
  lib/libzfs/libzfs_util.c
  tests/zfs-tests/cmd/rm_lnkcnt_zero_file/rm_lnkcnt_zero_file.c
  tests/zfs-tests/cmd/dir_rd_update/dir_rd_update.c
  cmd/zed/zed_exec.c
  module/icp/core/kcf_sched.c
  module/zfs/dsl_pool.c
  module/zfs/arc.c
  module/nvpair/nvpair.c
  man/man5/zfs-module-parameters.5

Reviewed-by: GeLiXin <ge.lixin@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5241
2016-10-08 14:57:56 -07:00
Brian Behlendorf 482cd9ee69 Fletcher4: Incremental updates and ctx calculation
Fixes ABI issues with fletcher4 code, adds support for
incremental updates, and adds ztest method for testing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #5164
2016-10-07 12:44:12 -07:00
Brian Behlendorf 910a571578 Add python style checking
Introduce a make recipe for flake8 to enable python
style checking. Ensure all python scripts pass flake8.
Return an error code of 0 for arcstat.py -v and
dbufstat.py -v.  Add test cases for python scripts.

Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ian Lee <IanLee1521@gmail.com>
Closes #5230
2016-10-07 09:54:02 -07:00
Jinshan Xiong 1de321e626 Add support for user/group dnode accounting & quota
This patch tracks dnode usage for each user/group in the
DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode
accounting have the key prefixed with "obj-" followed by the UID/GID
in string format (as done for the block accounting).
A new SPA feature has been added for dnode accounting as well as
a new ZPL version. The SPA feature must be enabled in the pool
before upgrading the zfs filesystem. During the zfs version upgrade,
a "quotacheck" will be executed by marking all dnode as dirty.

ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
2016-10-07 09:45:13 -07:00
Giuseppe Di Natale e169749fc0 Correct exit code for dbufstat -v and arcstat -v
Both scripts were returning an error code of 1
when using the -v argument. -v should exit with
an error code of 0.

Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
2016-10-06 10:52:21 -07:00
Giuseppe Di Natale 0bde1f7cb5 Correct style in arcstat and arc_summary
Fix arcstat and arc_summary so they pass
flake8 python code style checks.

Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
2016-10-06 10:04:54 -07:00
Gvozden Neskovic 37f520db2d Fletcher4: Incremental using SIMD
Combine incrementally computed fletcher4 checksums. Checksums are combined
a posteriori, allowing for parallel computation on chunks to be implemented if
required. The algorithm is general, and does not add changes in each SIMD
implementation.
New test in ztest verifies incremental fletcher computations.

Checksum combining matrix for two buffers `a` and `b`, where `Ca` and `Cb` are
respective fletcher4 checksums, `Cab` is combined checksum, `s` is size of buffer
`b` (divided by sizeof(uint32_t)) is:

Cab[A] = Cb[A] + Ca[A]
Cab[B] = Cb[B] + Ca[B] + s * Ca[A]
Cab[C] = Cb[C] + Ca[C] + s * Ca[B] + s(s+1)/2 * Ca[A]
Cab[D] = Cb[D] + Ca[D] + s * Ca[C] + s(s+1)/2 * Ca[B] + s(s+1)(s+2)/6 * Ca[A]

NOTE: this calculation overflows for larger buffers. Thus, internally, the calculation
is performed on 8MiB chunks.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
2016-10-05 16:41:46 +02:00
luozhengzheng e2c292bbfc Fix coverity defects: CID 150953, 147603, 147610
coverity scan CID:150953,type: uninitialized scalar variable
coverity scan CID:147603,type: Resource leak
coverity scan CID:147610,type: Resource leak

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5209
2016-10-04 18:15:57 -07:00
Tony Hutter 3c67d83a8a OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported by: Tony Hutter <hutter2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/4185
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee

Porting Notes:
This code is ported on top of the Illumos Crypto Framework code:

    b5e030c8db

The list of porting changes includes:

- Copied module/icp/include/sha2/sha2.h directly from illumos

- Removed from module/icp/algs/sha2/sha2.c:
	#pragma inline(SHA256Init, SHA384Init, SHA512Init)

- Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since
  it now takes in an extra parameter.

- Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c

- Added skein & edonr to libicp/Makefile.am

- Added sha512.S.  It was generated from sha512-x86_64.pl in Illumos.

- Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument.

- In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section
  to not #include the non-existant endian.h.

- In skein_test.c, renane NULL to 0 in "no test vector" array entries to get
  around a compiler warning.

- Fixup test files:
	- Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>,
	- Remove <note.h> and define NOTE() as NOP.
	- Define u_longlong_t
	- Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p"
	- Rename NULL to 0 in "no test vector" array entries to get around a
	  compiler warning.
	- Remove "for isa in $($ISAINFO); do" stuff
	- Add/update Makefiles
	- Add some userspace headers like stdio.h/stdlib.h in places of
	  sys/types.h.

- EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules.

- Update scripts/zfs2zol-patch.sed

- include <sys/sha2.h> in sha2_impl.h

- Add sha2.h to include/sys/Makefile.am

- Add skein and edonr dirs to icp Makefile

- Add new checksums to zpool_get.cfg

- Move checksum switch block from zfs_secpolicy_setprop() to
  zfs_check_settable()

- Fix -Wuninitialized error in edonr_byteorder.h on PPC

- Fix stack frame size errors on ARM32
  	- Don't unroll loops in Skein on 32-bit to save stack space
  	- Add memory barriers in sha2.c on 32-bit to save stack space

- Add filetest_001_pos.ksh checksum sanity test

- Add option to write psudorandom data in file_write utility
2016-10-03 14:51:15 -07:00
Romain Dolbeau 62a65a654e Add parity generation/rebuild using 128-bits NEON for Aarch64
This re-use the framework established for SSE2, SSSE3 and
AVX2. However, GCC is using FP registers on Aarch64, so
unlike SSE/AVX2 we can't rely on the registers being left alone
between ASM statements. So instead, the NEON code uses
C variables and GCC extended ASM syntax. Note that since
the kernel explicitly disable vector registers, they
have to be locally re-enabled explicitly.

As we use the variable's number to define the symbolic
name, and GCC won't allow duplicate symbolic names,
numbers have to be unique. Even when the code is not
going to be used (e.g. the case for 4 registers when
using the macro with only 2). Only the actually used
variables should be declared, otherwise the build
will fails in debug mode.

This requires the replacement of the XOR(X,X) syntax
by a new ZERO(X) macro, which does the same thing but
without repeating the argument. And perhaps someday
there will be a machine where there is a more efficient
way to zero a register than XOR with itself. This affects
scalar, SSE2, SSSE3 and AVX2 as they need the new macro.

It's possible to write faster implementations (different
scheduling, different unrolling, interleaving NEON and
scalar, ...) for various cores, but this one has the
advantage of fitting in the current state of the code,
and thus is likely easier to review/check/merge.

The only difference between aarch64-neon and aarch64-neonx2
is that aarch64-neonx2 unroll some functions some more.

Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes #4801
2016-10-03 09:44:00 -07:00
luozhengzheng aecdc70604 Fix coverity defects: CID 147448, 147449, 147450, 147453, 147454
coverity scan CID:147448,type: unchecked return value
coverity scan CID:147449,type: unchecked return value
coverity scan CID:147450,type: unchecked return value
coverity scan CID:147453,type: unchecked return value
coverity scan CID:147454,type: unchecked return value

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5206
2016-10-02 11:24:54 -07:00
GeLiXin ed3ea30fb9 Fix coverity defects: CID 147536, 147537, 147538
coverity scan CID:147536, type: Argument cannot be negative
- may write or close fd which is negative
coverity scan CID:147537, type: Argument cannot be negative
- may call dup2 with a negative fd
coverity scan CID:147538, type: Argument cannot be negative
- may read or fchown with a negative fd

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes #5185
2016-09-30 15:40:07 -07:00
Gvozden Neskovic 292d573e70 raidz_test: respect wall time
When timeout is specified (-t), stop worker threads in the middle of work units.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Issue #5180 
Closes #5190
2016-09-30 15:19:51 -07:00
BearBabyLiu 0b78aeae92 Fix coverity defects: CID 147443, 147656, 147655, 147441, 147653
coverity scan CID:147443, Type: Buffer not null terminated
coverity scan CID:147656, Type: Copy into fixed size buffer
coverity scan CID:147655, Type: Copy into fixed size buffer
coverity scan CID:147441, Type: Buffer not null terminated
coverity scan CID:147653, Type: Copy into fixed size buffer

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: liuhuang <liu.huang@zte.com.cn>
Closes #5165
2016-09-29 13:33:09 -07:00
cao 9ec0403d6a Fix coverity defects: CID 147610, 147608, 147607
coverity scan CID:147610, Type: Resource leak.
coverity scan CID:147608, Type: Resource leak.
coverity scan CID:147607, Type: Resource leak.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5143
2016-09-29 12:11:44 -07:00
cao 92bc927868 Fix coverity defects: CID 147602 147604
coverity scan CID:147604, Type: Resource leak.
coverity scan CID:147602, Type: Resource leak.
reason: safe_malloc calcvs, goto children but not free calcvs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5155
2016-09-23 15:43:46 -07:00
luozhengzheng d0662a1beb Fix coverity defects: CID 147613 147614 147616 147617
coverity scan CID:147617,type: resource leaks
coverity scan CID:147616,type: resource leaks
coverity scan CID:147614,type: resource leaks
coverity scan CID:147613,type: resource leaks

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5150
2016-09-23 09:10:50 -07:00
luozhengzheng 5df39c1e43 Fix coverity defects
1.coverity scan CID:147445 function zfs_do_send in zfs_main.c
Buffer not null terminated (BUFFER_SIZE_WARNING)

2.coverity scan CID:147443 function zfs_do_bookmark in zfs_main.c
Buffer not null terminated (BUFFER_SIZE_WARNING)

3.coverity scan CID:147660 function main in zinject.c
Passing string argv[0] of unknown size to strcpy
By the way, the leak of g_zfs is fixed.

4.coverity scan CID: 147442 function make_disks in zpool_vdev.c
Buffer not null terminated (BUFFER_SIZE_WARNING)

5.coverity scan CID: 147661 function main in dir_rd_update.c
passing string cp1 of unknown size to strcpy

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5130
2016-09-22 15:55:41 -07:00
cao 884385a0b2 Fix coverity defects
Fix coverity defects:
coverity scan CID:147623, Type: Resource leak.
coverity scan CID:147622, Type: Resource leak.
reason: zpool_open zhp, but not zpool_close zhp. so resource leak.

coverity scan CID:147621, Type: Resource fd leak.
coverity scan CID:147620, Type: Resource fd leak.
reason: do_write do_read open file fd,but exception not close fd.

delete unuse definition DMU_OS_IS_L2COMPRESSIBLE.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5137
2016-09-20 17:45:45 -07:00
slashdd 792517389f Change /etc/mtab to /proc/self/mounts
Fix misleading error message:

 "The /dev/zfs device is missing and must be created.", if /etc/mtab is missing.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Closes #4680 
Closes #5029
2016-09-20 10:07:58 -07:00
luozhengzheng 30f3f2e13c Fix Coverity defects
CID 147659, 150952 and 147645

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5103
2016-09-17 15:08:54 -07:00
Dan Kimmel 2aa34383b9 DLPX-40252 integrate EP-476 compressed zfs send/receive
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: David Quigley <david.quigley@intel.com>
Issue #5078
2016-09-13 09:58:58 -07:00
George Wilson d3c2ae1c08 OpenZFS 6950 - ARC should cache compressed data
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: David Quigley <david.quigley@intel.com>

This review covers the reading and writing of compressed arc headers, sharing
data between the arc_hdr_t and the arc_buf_t, and the implementation of a new
dbuf cache to keep frequently access data uncompressed.

I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs
off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block
for that DVA. The physical block may or may not be compressed. If compressed
arc is enabled and the block on-disk is compressed, then the b_pdata will match
the block on-disk and remain compressed in memory. If the block on disk is not
compressed, then neither will the b_pdata. Lastly, if compressed arc is
disabled, then b_pdata will always be an uncompressed version of the on-disk
block.

Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict
any arc_buf_t's that are no longer referenced. This means that the arc will
primarily have compressed blocks as the arc_buf_t's are considered overhead and
are always uncompressed. When a consumer reads a block we first look to see if
the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new
arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If
the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t
and bcopy the uncompressed contents from the first arc_buf_t to the new one.

Writing to the compressed arc requires that we first discard the b_pdata since
the physical block is about to be rewritten. The new data contents will be
passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we
will copy the physical block contents to a newly allocated b_pdata.

When an l2arc is inuse it will also take advantage of the b_pdata. Now the
l2arc will always write the contents of b_pdata to the l2arc. This means that
when compressed arc is enabled that the l2arc blocks are identical to those
stored in the main data pool. This provides a significant advantage since we
can leverage the bp's checksum when reading from the l2arc to determine if the
contents are valid. If the compressed arc is disabled, then we must first
transform the read block to look like the physical block in the main data pool
before comparing the checksum and determining it's valid.

OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0
Issue #5078
2016-09-13 09:58:33 -07:00
luozhengzheng a425f5bff9 Fix memleak in zfs_do_* and zpool_do_*
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5056
2016-09-12 13:02:47 -07:00
loli10K e33da554c5 Allow ZVOL bookmarks to be listed recursively
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #4503
Closes #5072
2016-09-12 12:40:53 -07:00
liuhuang bd296705d5 Fix memory/fd leak in check_file() and is_spare()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: liuhuang <liu.huang@zte.com.cn>
Closes #5085
2016-09-12 09:44:26 -07:00
Don Brady d02ca37979 Bring over illumos ZFS FMA logic -- phase 1
This first phase brings over the ZFS SLM module, zfs_mod.c, to handle
auto operations in response to disk events. Disk event monitoring is
provided from libudev and generates the expected payload schema for
zfs_mod. This work leverages the recently added devid and phys_path
strings in the vdev label.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #4673
2016-09-01 11:39:45 -07:00
Brian Behlendorf 9d69e9b268 Fix zhack argument processing
The argument processing is zhack makes the assumption that getopt()
will not permute argv.  This isn't true for the GNU implementation of
getopt() unless the optstring is prefixed with a '+'.  In which case
this is equivalent to setting the POSIXLY_CORRECT environment variable

In addition, update the usage() and optstrings to reflect the existing
supported options.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: liaoyuxiangqin <guo.yong33@zte.com.cn>
Closes #5047
2016-08-31 14:32:46 -07:00
Gvozden Neskovic f0c26069bd zdb: fencepost error at zdb_cb.zcb_embedded_histogram[][]
Erroneous access detected by gcc UndefinedBehaviorSanitizer:
`zdb.c:2424:7: runtime error: index 112 out of bounds for type 'uint64_t [112]'`

Fix: increase histogram size by 1 to accommodate all possible sizes.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4934
Issue #4883
2016-08-16 14:53:09 -07:00
Hans Rosenfeld fb390aafc8 OpenZFS 5997 - FRU field not set during pool creation and never updated
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Dan Fields <dan.fields@nexenta.com>
Reviewed by: Josef Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Signed-off-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/5997
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283

Porting Notes:

In addition to the OpenZFS changes this patch realigns the events
with those found in OpenZFS.

Events which would be logged as sysevents on illumos have been
been mapped to the 'sysevent' class for Linux.  In addition, several
subclass names have been changed to match what is used in OpenZFS.
In all cases this means a '.' was changed to an '_' in the subclass.

The scripts provided by ZoL have been updated, however users which
provide scripts for any of the following events will need to rename
them based on the new subclass names.

  ereport.fs.zfs.config.sync         sysevent.fs.zfs.config_sync
  ereport.fs.zfs.zpool.destroy       sysevent.fs.zfs.pool_destroy
  ereport.fs.zfs.zpool.reguid        sysevent.fs.zfs.pool_reguid
  ereport.fs.zfs.vdev.remove         sysevent.fs.zfs.vdev_remove
  ereport.fs.zfs.vdev.clear          sysevent.fs.zfs.vdev_clear
  ereport.fs.zfs.vdev.check          sysevent.fs.zfs.vdev_check
  ereport.fs.zfs.vdev.spare          sysevent.fs.zfs.vdev_spare
  ereport.fs.zfs.vdev.autoexpand     sysevent.fs.zfs.vdev_autoexpand
  ereport.fs.zfs.resilver.start      sysevent.fs.zfs.resilver_start
  ereport.fs.zfs.resilver.finish     sysevent.fs.zfs.resilver_finish
  ereport.fs.zfs.scrub.start         sysevent.fs.zfs.scrub_start
  ereport.fs.zfs.scrub.finish        sysevent.fs.zfs.scrub_finish
  ereport.fs.zfs.bootfs.vdev.attach  sysevent.fs.zfs.bootfs_vdev_attach
2016-08-12 13:06:48 -07:00
Chunwei Chen b320dd91a9 Fix infinite loop when zdb -R with d flag
Also print decompress progress to stderr so it wouldn't pollute raw output
with r flag.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4956
2016-08-11 15:21:32 -07:00
Brian Behlendorf f3c9cac143 Fix gcc -Warray-bounds check for dump_object() in zdb
As of gcc 6.1.1 20160621 (Red Hat 6.1.1-3) an array bounds warnings
is detected in the zdb the dump_object() function.  The analysis is
correct but difficult to interpret because this is implemented as a
macro.  Rework the ZDB_OT_NAME in to a function and remove the case
detected by gcc which is a side effect of the DMU_OT_IS_VALID() macro.

  zdb.c: In function ‘dump_object’:
  zdb.c:1931:288: error: array subscript is outside array bounds
      [-Werror=array-bounds]

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #4907
2016-08-02 13:14:47 -07:00
Gvozden Neskovic df053d67a9 ztest: memory leaks reported by AddressSanitizer
Leaks reported by using AddressSanitizer, GCC 6.1.0

Direct leak of 4097 byte(s) in 1 object(s) allocated from:
    #1 0x414f73 in process_options cmd/ztest/ztest.c:721

Direct leak of 5440 byte(s) in 17 object(s) allocated from:
    #1 0x41bfd5 in umem_alloc ../../lib/libspl/include/umem.h:88
    #2 0x41bfd5 in ztest_zap_parallel cmd/ztest/ztest.c:4659
    #3 0x4163a8 in ztest_execute cmd/ztest/ztest.c:5907

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4896
2016-07-29 15:34:12 -07:00
Brian Behlendorf fcf64f45d9 Fix zdb crash with 4K-only devices
Here's the problem - on 4K native devices in userland on
Linux using O_DIRECT, buffers must be 4K aligned or I/O
will fail with EINVAL, causing zdb (and others) to coredump.
Since userland probably doesn't need optimized buffer caches,
we just force 4K alignment on everything.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #4479
2016-07-27 13:38:46 -07:00
Brian Behlendorf 8a39abaafa Multi-thread 'zpool import' for blkid
Commit 519129f added support to multi-thread 'zpool import' for
the case where block devices are scanned for under /dev/.  This
commit generalizes that logic and applies it to the case where
device names are acquired from libblkid.

The zpool_find_import_scan() and zpool_find_import_blkid()
functions create an AVL tree containing each device name.  Each
entry in this tree is dispatched to a taskq where the function
zpool_open_func() validates the device by opening it and reading
the label.  This may result in additional entries being added
to the tree and those device paths being verified.

This is largely how the upstream OpenZFS code behaves but due to
significant differences the non-Linux code has been dropped for
readability.  Additionally, this code makes use of taskqs and
kmutexs which are normally not available to the command line tools.
Special care has been taken to allow their use in the import
functions.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #4794
2016-07-27 13:38:46 -07:00
Gvozden Neskovic a64f903b06 Fixes for issues found with cppcheck tool
The patch fixes small number of errors/false positives reported by `cppcheck`,
static analysis tool for C/C++.

cppcheck 1.72

$ cppcheck . --force --quiet
[cmd/zfs/zfs_main.c:4444]: (error) Possible null pointer dereference: who_perm
[cmd/zfs/zfs_main.c:4445]: (error) Possible null pointer dereference: who_perm
[cmd/zfs/zfs_main.c:4446]: (error) Possible null pointer dereference: who_perm
[cmd/zpool/zpool_iter.c:317]: (error) Uninitialized variable: nvroot
[cmd/zpool/zpool_vdev.c:1526]: (error) Memory leak: child
[lib/libefi/rdwr_efi.c:1118]: (error) Memory leak: efi_label
[lib/libuutil/uu_misc.c:207]: (error) va_list 'args' was opened but not closed by va_end().
[lib/libzfs/libzfs_import.c:1554]: (error) Dangerous usage of 'diskname' (strncpy doesn't always null-terminate it).
[lib/libzfs/libzfs_sendrecv.c:3279]: (error) Dereferencing 'cp' after it is deallocated / released
[tests/zfs-tests/cmd/file_write/file_write.c:154]: (error) Possible null pointer dereference: operation
[tests/zfs-tests/cmd/randfree_file/randfree_file.c:90]: (error) Memory leak: buf
[cmd/zinject/zinject.c:1068]: (error) Uninitialized variable: dataset
[module/icp/io/sha2_mod.c:698]: (error) Uninitialized variable: blocks_per_int64

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1392
2016-07-27 13:31:22 -07:00
Gvozden Neskovic c9187d867f Fixes and enhancements of SIMD raidz parity
- Implementation lock replaced with atomic variable

- Trailing whitespace is removed from user specified parameter, to enhance
experience when using commands that add newline, e.g. `echo`

- raidz_test: remove dependency on `getrusage()` and RUSAGE_THREAD, Issue #4813

- silence `cppcheck` in vdev_raidz, partial solution of Issue #1392

- Minor fixes and cleanups

- Enable use of original parity methods in [fastest] configuration.
New opaque original ops structure, representing native methods, is added
to supported raidz methods. Original parity methods are executed if selected
implementation has NULL fn pointer.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4813
Issue #1392
2016-07-19 16:43:07 -07:00
Brian Behlendorf b756ff2445 Update arc_summary.py for prefetch changes
Commit 7f60329 removed several kstats which arc_summary.py read.
Remove these kstats from arc_summary.py in the same way this was
handled in FreeNAS.

FreeNAS-commit: https://github.com/freenas/freenas/commit/3901f73

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4695
2016-07-19 09:12:41 -07:00
Gvozden Neskovic ae25d22235 Add RAID-Z routines for SSE2 instruction set, in x86_64 mode.
The patch covers low-end and older x86 CPUs.  Parity generation is
equivalent to SSSE3 implementation, but reconstruction is somewhat
slower.  Previous 'sse' implementation is renamed to 'ssse3' to
indicate highest instruction set used.

Benchmark results:
scalar_rec_p                    4    720476442
scalar_rec_q                    4    187462804
scalar_rec_r                    4    138996096
scalar_rec_pq                   4    140834951
scalar_rec_pr                   4    129332035
scalar_rec_qr                   4    81619194
scalar_rec_pqr                  4    53376668

sse2_rec_p                      4    2427757064
sse2_rec_q                      4    747120861
sse2_rec_r                      4    499871637
sse2_rec_pq                     4    522403710
sse2_rec_pr                     4    464632780
sse2_rec_qr                     4    319124434
sse2_rec_pqr                    4    205794190

ssse3_rec_p                     4    2519939444
ssse3_rec_q                     4    1003019289
ssse3_rec_r                     4    616428767
ssse3_rec_pq                    4    706326396
ssse3_rec_pr                    4    570493618
ssse3_rec_qr                    4    400185250
ssse3_rec_pqr                   4    377541245

original_rec_p                  4    691658568
original_rec_q                  4    195510948
original_rec_r                  4    26075538
original_rec_pq                 4    103087368
original_rec_pr                 4    15767058
original_rec_qr                 4    15513175
original_rec_pqr                4    10746357

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4783
2016-07-13 10:24:55 -07:00
Igor Kozhukhov eca7b76001 OpenZFS 6314 - buffer overflow in dsl_dataset_name
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6314
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d6160ee
2016-06-28 13:47:03 -07:00
Matthew Ahrens 47dfff3b86 OpenZFS 2605, 6980, 6902
2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12

6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6980
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f

Porting notes:
- All rsend and snapshop tests enabled and updated for Linux.
- Fix misuse of input argument in traverse_visitbp().
- Fix ISO C90 warnings and errors.
- Fix gcc 'missing braces around initializer' in
  'struct send_thread_arg to_arg =' warning.
- Replace 4 argument fletcher_4_native() with 3 argument version,
  this change was made in OpenZFS 4185 which has not been ported.
- Part of the sections for 'zfs receive' and 'zfs send' was
  rewritten and reordered to approximate upstream.
- Fix mktree xattr creation, 'user.' prefix required.
- Minor fixes to newly enabled test cases
- Long holds for volumes allowed during receive for minor registration.
2016-06-28 13:47:02 -07:00
Ned Bass 50c957f702 Implement large_dnode pool feature
Justification
-------------

This feature adds support for variable length dnodes. Our motivation is
to eliminate the overhead associated with using spill blocks.  Spill
blocks are used to store system attribute data (i.e. file metadata) that
does not fit in the dnode's bonus buffer. By allowing a larger bonus
buffer area the use of a spill block can be avoided.  Spill blocks
potentially incur an additional read I/O for every dnode in a dnode
block. As a worst case example, reading 32 dnodes from a 16k dnode block
and all of the spill blocks could issue 33 separate reads. Now suppose
those dnodes have size 1024 and therefore don't need spill blocks.  Then
the worst case number of blocks read is reduced to from 33 to two--one
per dnode block. In practice spill blocks may tend to be co-located on
disk with the dnode blocks so the reduction in I/O would not be this
drastic. In a badly fragmented pool, however, the improvement could be
significant.

ZFS-on-Linux systems that make heavy use of extended attributes would
benefit from this feature. In particular, ZFS-on-Linux supports the
xattr=sa dataset property which allows file extended attribute data
to be stored in the dnode bonus buffer as an alternative to the
traditional directory-based format. Workloads such as SELinux and the
Lustre distributed filesystem often store enough xattr data to force
spill bocks when xattr=sa is in effect. Large dnodes may therefore
provide a performance benefit to such systems.

Other use cases that may benefit from this feature include files with
large ACLs and symbolic links with long target names. Furthermore,
this feature may be desirable on other platforms in case future
applications or features are developed that could make use of a
larger bonus buffer area.

Implementation
--------------

The size of a dnode may be a multiple of 512 bytes up to the size of
a dnode block (currently 16384 bytes). A dn_extra_slots field was
added to the current on-disk dnode_phys_t structure to describe the
size of the physical dnode on disk. The 8 bits for this field were
taken from the zero filled dn_pad2 field. The field represents how
many "extra" dnode_phys_t slots a dnode consumes in its dnode block.
This convention results in a value of 0 for 512 byte dnodes which
preserves on-disk format compatibility with older software.

Similarly, the in-memory dnode_t structure has a new dn_num_slots field
to represent the total number of dnode_phys_t slots consumed on disk.
Thus dn->dn_num_slots is 1 greater than the corresponding
dnp->dn_extra_slots. This difference in convention was adopted
because, unlike on-disk structures, backward compatibility is not a
concern for in-memory objects, so we used a more natural way to
represent size for a dnode_t.

The default size for newly created dnodes is determined by the value of
a new "dnodesize" dataset property. By default the property is set to
"legacy" which is compatible with older software. Setting the property
to "auto" will allow the filesystem to choose the most suitable dnode
size. Currently this just sets the default dnode size to 1k, but future
code improvements could dynamically choose a size based on observed
workload patterns. Dnodes of varying sizes can coexist within the same
dataset and even within the same dnode block. For example, to enable
automatically-sized dnodes, run

 # zfs set dnodesize=auto tank/fish

The user can also specify literal values for the dnodesize property.
These are currently limited to powers of two from 1k to 16k. The
power-of-2 limitation is only for simplicity of the user interface.
Internally the implementation can handle any multiple of 512 up to 16k,
and consumers of the DMU API can specify any legal dnode value.

The size of a new dnode is determined at object allocation time and
stored as a new field in the znode in-memory structure. New DMU
interfaces are added to allow the consumer to specify the dnode size
that a newly allocated object should use. Existing interfaces are
unchanged to avoid having to update every call site and to preserve
compatibility with external consumers such as Lustre. The new
interfaces names are given below. The versions of these functions that
don't take a dnodesize parameter now just call the _dnsize() versions
with a dnodesize of 0, which means use the legacy dnode size.

New DMU interfaces:
  dmu_object_alloc_dnsize()
  dmu_object_claim_dnsize()
  dmu_object_reclaim_dnsize()

New ZAP interfaces:
  zap_create_dnsize()
  zap_create_norm_dnsize()
  zap_create_flags_dnsize()
  zap_create_claim_norm_dnsize()
  zap_create_link_dnsize()

The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The
spa_maxdnodesize() function should be used to determine the maximum
bonus length for a pool.

These are a few noteworthy changes to key functions:

* The prototype for dnode_hold_impl() now takes a "slots" parameter.
  When the DNODE_MUST_BE_FREE flag is set, this parameter is used to
  ensure the hole at the specified object offset is large enough to
  hold the dnode being created. The slots parameter is also used
  to ensure a dnode does not span multiple dnode blocks. In both of
  these cases, if a failure occurs, ENOSPC is returned. Keep in mind,
  these failure cases are only possible when using DNODE_MUST_BE_FREE.

  If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0.
  dnode_hold_impl() will check if the requested dnode is already
  consumed as an extra dnode slot by an large dnode, in which case
  it returns ENOENT.

* The function dmu_object_alloc() advances to the next dnode block
  if dnode_hold_impl() returns an error for a requested object.
  This is because the beginning of the next dnode block is the only
  location it can safely assume to either be a hole or a valid
  starting point for a dnode.

* dnode_next_offset_level() and other functions that iterate
  through dnode blocks may no longer use a simple array indexing
  scheme. These now use the current dnode's dn_num_slots field to
  advance to the next dnode in the block. This is to ensure we
  properly skip the current dnode's bonus area and don't interpret it
  as a valid dnode.

zdb
---
The zdb command was updated to display a dnode's size under the
"dnsize" column when the object is dumped.

For ZIL create log records, zdb will now display the slot count for
the object.

ztest
-----
Ztest chooses a random dnodesize for every newly created object. The
random distribution is more heavily weighted toward small dnodes to
better simulate real-world datasets.

Unused bonus buffer space is filled with non-zero values computed from
the object number, dataset id, offset, and generation number.  This
helps ensure that the dnode traversal code properly skips the interior
regions of large dnodes, and that these interior regions are not
overwritten by data belonging to other dnodes. A new test visits each
object in a dataset. It verifies that the actual dnode size matches what
was stored in the ztest block tag when it was created. It also verifies
that the unused bonus buffer space is filled with the expected data
patterns.

ZFS Test Suite
--------------
Added six new large dnode-specific tests, and integrated the dnodesize
property into existing tests for zfs allow and send/recv.

Send/Receive
------------
ZFS send streams for datasets containing large dnodes cannot be received
on pools that don't support the large_dnode feature. A send stream with
large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be
unrecognized by an incompatible receiving pool so that the zfs receive
will fail gracefully.

While not implemented here, it may be possible to generate a
backward-compatible send stream from a dataset containing large
dnodes. The implementation may be tricky, however, because the send
object record for a large dnode would need to be resized to a 512
byte dnode, possibly kicking in a spill block in the process. This
means we would need to construct a new SA layout and possibly
register it in the SA layout object. The SA layout is normally just
sent as an ordinary object record. But if we are constructing new
layouts while generating the send stream we'd have to build the SA
layout object dynamically and send it at the end of the stream.

For sending and receiving between pools that do support large dnodes,
the drr_object send record type is extended with a new field to store
the dnode slot count. This field was repurposed from unused padding
in the structure.

ZIL Replay
----------
The dnode slot count is stored in the uppermost 8 bits of the lr_foid
field. The bits were unused as the object id is currently capped at
48 bits.

Resizing Dnodes
---------------
It should be possible to resize a dnode when it is dirtied if the
current dnodesize dataset property differs from the dnode's size, but
this functionality is not currently implemented. Clearly a dnode can
only grow if there are sufficient contiguous unused slots in the
dnode block, but it should always be possible to shrink a dnode.
Growing dnodes may be useful to reduce fragmentation in a pool with
many spill blocks in use. Shrinking dnodes may be useful to allow
sending a dataset to a pool that doesn't support the large_dnode
feature.

Feature Reference Counting
--------------------------
The reference count for the large_dnode pool feature tracks the
number of datasets that have ever contained a dnode of size larger
than 512 bytes. The first time a large dnode is created in a dataset
the dataset is converted to an extensible dataset. This is a one-way
operation and the only way to decrement the feature count is to
destroy the dataset, even if the dataset no longer contains any large
dnodes. The complexity of reference counting on a per-dnode basis was
too high, so we chose to track it on a per-dataset basis similarly to
the large_block feature.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3542
2016-06-24 13:13:21 -07:00
Brian Behlendorf 391bba1d28 Revert "Add a test case for dmu_free_long_range() to ztest"
This reverts commit d0de2e82df which
introduced a new test case to ztest which is failing occasionally
during automated testing.  The change is being reverted until
the issue can be fully investigated.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4754
2016-06-24 12:48:08 -07:00
Boris Protopopov d0de2e82df Add a test case for dmu_free_long_range() to ztest
Signed-off-by: Boris Protopopov <bprotopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4754
2016-06-21 10:59:28 -07:00
Gvozden Neskovic ab9f4b0b82 SIMD implementation of vdev_raidz generate and reconstruct routines
This is a new implementation of RAIDZ1/2/3 routines using x86_64
scalar, SSE, and AVX2 instruction sets. Included are 3 parity
generation routines (P, PQ, and PQR) and 7 reconstruction routines,
for all RAIDZ level. On module load, a quick benchmark of supported
routines will select the fastest for each operation and they will
be used at runtime. Original implementation is still present and
can be selected via module parameter.

Patch contains:
- specialized gen/rec routines for all RAIDZ levels,
- new scalar raidz implementation (unrolled),
- two x86_64 SIMD implementations (SSE and AVX2 instructions sets),
- fastest routines selected on module load (benchmark).
- cmd/raidz_test - verify and benchmark all implementations
- added raidz_test to the ZFS Test Suite

New zfs module parameters:
- zfs_vdev_raidz_impl (str): selects the implementation to use. On
  module load, the parameter will only accept first 3 options, and
  the other implementations can be set once module is finished
  loading. Possible values for this option are:
    "fastest" - use the fastest math available
    "original" - use the original raidz code
    "scalar" - new scalar impl
    "sse" - new SSE impl if available
    "avx2" - new AVX2 impl if available

See contents of `/sys/module/zfs/parameters/zfs_vdev_raidz_impl` to
get the list of supported values. If an implementation is not supported
on the system, it will not be shown. Currently selected option is
enclosed in `[]`.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4328
2016-06-21 09:27:26 -07:00
Brian Behlendorf f74b821a66 Add `zfs allow` and `zfs unallow` support
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands.  In addition, non-
privileged users should be able to run all of the following commands:

  * zpool [list | iostat | status | get]
  * zfs [list | get]

Historically this functionality was not available on Linux.  In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability.  Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.

Even with this change some limitations remain.  Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace).  This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code.  It
may be possible to add this functionality in the future.

This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite.  These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.

Two minor bug fixes were required for test-running.py.  First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it.  Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.

Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #362 
Closes #434 
Closes #4100
Closes #4394 
Closes #4410 
Closes #4487
2016-06-07 09:16:52 -07:00
Colin Ian King 2627e75245 Fix minor spelling mistakes
Trivial spelling mistake fix in error message text.

* Fix spelling mistake "adminstrator" -> "administrator"
* Fix spelling mistake "specificed" -> "specified"
* Fix spelling mistake "interperted" -> "interpreted"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4728
2016-06-06 14:45:26 -07:00
Jinshan Xiong 1eeb4562a7 Implementation of AVX2 optimized Fletcher-4
New functionality:
- Preserves existing scalar implementation.
- Adds AVX2 optimized Fletcher-4 computation.
- Fastest routines selected on module load (benchmark).
- Test case for Fletcher-4 added to ztest.

New zcommon module parameters:
-  zfs_fletcher_4_impl (str): selects the implementation to use.
    "fastest" - use the fastest version available
    "cycle"   - cycle trough all available impl for ztest
    "scalar"  - use the original version
    "avx2"    - new AVX2 implementation if available

Performance comparison (Intel i7 CPU, 1MB data buffers):
- Scalar:  4216 MB/s
- AVX2:   14499 MB/s

See contents of `/sys/module/zcommon/parameters/zfs_fletcher_4_impl`
to get list of supported values. If an implementation is not supported
on the system, it will not be shown. Currently selected option is
enclosed in `[]`.

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4330
2016-06-02 14:30:51 -07:00
Tony Hutter 26ef0cc7db OpenZFS 6531 - Provide mechanism to artificially limit disk performance
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6531
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130

Porting notes:
- Added new IO delay tracepoints, and moved common ZIO tracepoint macros
  to a new trace_common.h file.
- Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function.
- Updated zinject man page
- Updated zpool_scrub test files
2016-05-26 10:11:51 -07:00
Tony Hutter 7e945072d1 Add request size histograms (-r) to zpool iostat, minor man page fix
Add -r option to "zpool iostat" to print request size histograms for the leaf
ZIOs. This includes histograms of individual ZIOs ("ind") and aggregate ZIOs
("agg"). These stats can be useful for seeing how well the ZFS IO aggregator
is working.

$ zpool iostat -r
mypool        sync_read    sync_write    async_read    async_write      scrub
req_size      ind    agg    ind    agg    ind    agg    ind    agg    ind    agg
----------  -----  -----  -----  -----  -----  -----  -----  -----  -----  -----
512             0      0      0      0      0      0    530      0      0      0
1K              0      0    260      0      0      0    116    246      0      0
2K              0      0      0      0      0      0      0    431      0      0
4K              0      0      0      0      0      0      3    107      0      0
8K             15      0     35      0      0      0      0      6      0      0
16K             0      0      0      0      0      0      0     39      0      0
32K             0      0      0      0      0      0      0      0      0      0
64K            20      0     40      0      0      0      0      0      0      0
128K            0      0     20      0      0      0      0      0      0      0
256K            0      0      0      0      0      0      0      0      0      0
512K            0      0      0      0      0      0      0      0      0      0
1M              0      0      0      0      0      0      0      0      0      0
2M              0      0      0      0      0      0      0      0      0      0
4M              0      0      0      0      0      0    155     19      0      0
8M              0      0      0      0      0      0      0    811      0      0
16M             0      0      0      0      0      0      0     68      0      0
--------------------------------------------------------------------------------

Also rename the stray "-G" in the man page to be "-w" for latency histograms.

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #4659
2016-05-25 15:49:35 -07:00
Christer Ekholm 3491d6eb06 Consistently use parsable instead of parseable
This is a purely cosmetical change, to consistently prefer one of
two (both acceptable) choises for the word parsable in documentation and
code. I don't really care which to use, but acording to wiktionary
https://en.wiktionary.org/wiki/parsable#English parsable is preferred.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4682
2016-05-23 10:20:42 -07:00
Christer Ekholm bc2d809387 Make zpool list -vp print individual vdev sizes parsable.
Add argument format to print_one_column(), and use it to call
zfs_nicenum_format with, instead of just zfs_nicenum. Don't print "%"
for fragmentation or capacity percent values.

The calls to print_one_colum is made with ZFS_NICENUM_RAW if
cb->cb_literal (zpool list called with -p), and ZFS_NICENUM_1024 if not.

Also zpool_get_prop is modified to don't add "%" or "x" if literal.

Signed-off-by: Christer Ekholm <che@chrekh.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov
Closes #4657
2016-05-18 10:15:32 -07:00
Brian Behlendorf ada8258141 Revert "zhack: Add 'feature disable' command"
This reverts commit 8302528617 and
ebecfcd699 which broke the build.
While these patches do apply cleanly and passed previous test
runs they need to be updated to account for the changes made in
commit 241b541574.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 11:52:07 -07:00
Brian Behlendorf ebecfcd699 zhack: Add 'feature enable' force option
Add a force option to allow zhack to add features which are
part of the known set of supported features.  By default
this is disabled.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 11:00:42 -07:00
Brian Behlendorf 8302528617 zhack: Add 'feature disable' command
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 11:00:21 -07:00
Brian Behlendorf 72c407f827 zhack: Fix 'feature ref' comparison check
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 10:59:37 -07:00
Boris Protopopov e3a07cd033 Use zfs range locks in ztest
The zfs range lock interface no longer tightly depends on a
znode_t and therefore can be used in ztest.  This allows the
previous ztest specific implementation to be removed, and for
additional test coverage of the shared version.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4023
Issue #4024
2016-05-17 10:40:30 -07:00
Tony Hutter 193a37cb24 Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues
Update the zfs module to collect statistics on average latencies, queue sizes,
and keep an internal histogram of all IO latencies.  Along with this, update
"zpool iostat" with some new options to print out the stats:

-l: Include average IO latencies stats:

 total_wait     disk_wait    syncq_wait    asyncq_wait  scrub
 read  write   read  write   read  write   read  write   wait
-----  -----  -----  -----  -----  -----  -----  -----  -----
    -   41ms      -    2ms      -   46ms      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -      -      -      -      -      -      -      -      -
    -   49ms      -    2ms      -   47ms      -      -      -
    -      -      -      -      -      -      -      -      -
    -    2ms      -    1ms      -      -      -    1ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  2ms    1ms    2ms  412us   26us   25us      -    5ms      -
    -    1ms      -  413us      -   25us      -    5ms      -
    -    1ms      -  460us      -   29us      -    5ms      -
196us    1ms  196us  370us    7us   23us      -    5ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----

-w: Print out latency histograms:

sdb           total           disk         sync_queue      async_queue
latency    read   write    read   write    read   write    read   write   scrub
-------  ------  ------  ------  ------  ------  ------  ------  ------  ------
1ns           0       0       0       0       0       0       0       0       0
...
33us          0       0       0       0       0       0       0       0       0
66us          0       0     107    2486       2     788      12      12       0
131us         2     797     359    4499      10     558     184     184       6
262us        22     801     264    1563      10     286     287     287      24
524us        87     575      71   52086      15    1063     136     136      92
1ms         152    1190       5   41292       4    1693     252     252     141
2ms         245    2018       0   50007       0    2322     371     371     220
4ms         189    7455      22  162957       0    3912    6726    6726     199
8ms         108    9461       0  102320       0    5775    2526    2526      86
17ms         23   11287       0   37142       0    8043    1813    1813      19
34ms          0   14725       0   24015       0   11732    3071    3071       0
67ms          0   23597       0    7914       0   18113    5025    5025       0
134ms         0   33798       0     254       0   25755    7326    7326       0
268ms         0   51780       0      12       0   41593   10002   10002       0
537ms         0   77808       0       0       0   64255   13120   13120       0
1s            0  105281       0       0       0   83805   20841   20841       0
2s            0   88248       0       0       0   73772   14006   14006       0
4s            0   47266       0       0       0   29783   17176   17176       0
9s            0   10460       0       0       0    4130    6295    6295       0
17s           0       0       0       0       0       0       0       0       0
34s           0       0       0       0       0       0       0       0       0
69s           0       0       0       0       0       0       0       0       0
137s          0       0       0       0       0       0       0       0       0
-------------------------------------------------------------------------------

-h: Help

-H: Scripted mode. Do not display headers, and separate fields by a single
    tab instead of arbitrary space.

-q: Include current number of entries in sync & async read/write queues,
    and scrub queue:

 syncq_read    syncq_write   asyncq_read  asyncq_write   scrubq_read
 pend  activ   pend  activ   pend  activ   pend  activ   pend  activ
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0    227    394      0     19      0      0      0      0
    0      0    227    394      0     19      0      0      0      0
    0      0    108     98      0     19      0      0      0      0
    0      0     19     98      0      0      0      0      0      0
    0      0     78     98      0      0      0      0      0      0
    0      0     19     88      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----

-p: Display numbers in parseable (exact) values.

Also, update iostat syntax to allow the user to specify specific vdevs
to show statistics for.  The three options for choosing pools/vdevs are:

Display a list of pools:
    zpool iostat ... [pool ...]

Display a list of vdevs from a specific pool:
    zpool iostat ... [pool vdev ...]

Display a list of vdevs from any pools:
    zpool iostat ... [vdev ...]

Lastly, allow zpool command "interval" value to be floating point:
    zpool iostat -v 0.5

Signed-off-by: Tony Hutter <hutter2@llnl.gov
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4433
2016-05-12 12:36:32 -07:00
Adam Stevko 2a8b84b747 OpenZFS 3993, 4700
3993 zpool(1M) and zfs(1M) should support -p for "list" and "get"
4700 "zpool get" doesn't support -H or -o options

Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/3993
OpenZFS-issue: https://www.illumos.org/issues/4700
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c58b352

Porting notes:
I removed ZoL's zpool_get_prop_literal() in favor of
zpool_get_prop(..., boolean_t literal) since that's what OpenZFS
uses.  The functionality is the same.
2016-05-11 11:49:37 -07:00
Brian Behlendorf 3ac2794cbf OpenZFS 5669 - altroot not set in zpool create
5669 altroot not set in zpool create when specified with -o
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/5669
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c423721
Closes #4594
2016-05-05 09:27:55 -07:00
Josef 'Jeff' Sipek 8a5fc74880 Illumos 6659 - nvlist_free(NULL) is a no-op
6659 nvlist_free(NULL) is a no-op
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Marcel Telka <marcel@telka.sk>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/6659
  https://github.com/illumos/illumos-gate/commit/aab83bb

Ported-by: David Quigley <dpquigl@davequigley.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4566
2016-04-27 15:58:23 -07:00
Brian Behlendorf 2d82ea8b11 Use udev for partition detection
When ZFS partitions a block device it must wait for udev to create
both a device node and all the device symlinks.  This process takes
a variable length of time and depends on factors such how many links
must be created, the complexity of the rules, etc.  Complicating
the situation further it is not uncommon for udev to create and
then remove a link multiple times while processing the udev rules.

Given the above, the existing scheme of waiting for an expected
partition to appear by name isn't 100% reliable.  At this point
udev may still remove and recreate think link resulting in the
kernel modules being unable to open the device.

In order to address this the zpool_label_disk_wait() function
has been updated to use libudev.  Until the registered system
device acknowledges that it in fully initialized the function
will wait.  Once fully initialized all device links are checked
and allowed to settle for 50ms.  This makes it far more likely
that all the device nodes will exist when the kernel modules
need to open them.

For systems without libudev an alternate zpool_label_disk_wait()
was updated to include a settle time.  In addition, the kernel
modules were updated to include retry logic for this ENOENT case.
Due to the improved checks in the utilities it is unlikely this
logic will be invoked.  However, if the rare event it is needed
it will prevent a failure.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #4523
Closes #3708
Closes #4077
Closes #4144
Closes #4214
Closes #4517
2016-04-25 11:13:20 -07:00
Brian Behlendorf 5b4136bd49 Create unique partition labels
When partitioning a device a name may be specified for each partition.
Internally zfs doesn't use this partition name for anything so it
has always just been set to "zfs".

However this isn't optimal because udev will create symlinks using
this name in /dev/disk/by-partlabel/.  If the name isn't unique
then all the links cannot be created.

Therefore a random 64-bit value has been added to the partition
label, i.e "zfs-1234567890abcdef".  Additional information could
be encoded here but since partitions may be reused that might
result in confusion and it was decided against.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #4517
2016-04-25 11:13:09 -07:00
Chunwei Chen 6760077194 Make zfs mount according to relatime config in dataset
Also enable lazytime in mount.zfs

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
2016-04-05 18:55:59 -07:00
Don Brady 39fc0cb557 Add support for devid and phys_path keys in vdev disk labels
This is foundational work for ZED.

Updates a leaf vdev's persistent device strings on Linux platform

* only applies for a dedicated leaf vdev (aka whole disk)
* updated during pool create|add|attach|import
* used for matching device matching during auto-{online,expand,replace}
* stored in a leaf disk config label (i.e. alongside 'path' NVP)
* can opt-out using env var ZFS_VDEV_DEVID_OPT_OUT=YES

Some examples:

    path: '/dev/sdb1'
    devid: 'scsi-350000394a8ca4fbc-part1'
    phys_path: 'pci-0000:04:00.0-sas-0x50000394a8ca4fbf-lun-0'

    path: '/dev/mapper/mpatha'
    devid: 'dm-uuid-mpath-35000c5006304de3f'

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2856
Closes #3978
Closes #4416
2016-03-31 13:45:53 -07:00
Pavel Boldin 88cfff1824 zfs_main: fix `zfs userspace` squashing unresolved entries
The `zfs userspace` squashes all entries with unresolved numeric
values into a single output entry due to the comparsion always
made by the string name which is empty in case of unresolved IDs.

Fix this by falling to a numerical comparison when either one
of string values is not found. This then compares any numerical
values after all with a name resolved.

Signed-off-by: Pavel Boldin <boldin.pavel@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4440
2016-03-30 12:39:21 -07:00
Carlo Landmeter 967798d04a Use the correct macro to include backtrace
execinfo.h and backtrace() are GNU extensions provided by glibc
and not by gcc, see:

http://www.gnu.org/software/libc/manual/html_mono/libc.html#Backtraces

Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4453
2016-03-29 18:33:17 -07:00
Carlo Landmeter 6d723925cf Add missing fcntl.h to includes in mount_zfs.c
This is needed for musl libc

Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4456
2016-03-29 18:33:17 -07:00
Brian Behlendorf 505d9655c9 Fix zdb -e and zhack thread_init()
This issue was caused by calling `thread_init()` and `thread_fini()`
multiple times resulting in `kthread_key` being invalid.  To resolve
the issue the explicit calls to `thread_init()` and `thread_fini()`
required by the `zpool` command have been moved in to the command.
Consumers such as `zdb` and `zhack` perform the same initialized
through `kernel_init()` and `kernel_fini()`.

Resolving this issue allows multiple additional test cases to
be enabled.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #4331
2016-03-21 10:20:02 -07:00
Richard Yao e853ba3519 Cleanup linking
I noticed during code review of zfsonlinux/zfs#4385 that the author of a
commit had peppered the various Makefile.am files with `$(TIRPC_LIBS)`
when putting it into `lib/libspl/Makefile.am` should have sufficed. Upon
further examination, it seems that he had copied what we do with
`$(ZLIB)`. We also have a bit of that with `-ldl` too.  Unfortunately,
what we do is wrong, so lets fix it to set a good example for future
contributors.

In addition, we have multiple `-lz` and `-luuid` passed to the compiler
because each `AC_CHECK_LIB` adds it to `$LIBS`. That is somewhat
annoying to see, so we switch to `AC_SEARCH_LIBS` to avoid it.  This is
consistent with the recommendation to use `AC_SEARCH_LIBS` over
`AC_CHECK_LIB` by autotools upstream:

https://www.gnu.org/software/autoconf/manual/autoconf-2.66/html_node/Libraries.html

In an ideal world, this would translate into improvements in ELF's
`DT_NEEDED` entries, but that is not the case because of a couple of
bugs in libtool.

The first bug causes libtool to overlink by using static link
dependencies for dynamic linking:

https://wiki.mageia.org/en/Overlinking_issues_in_packaging#libtool_issues

The workaround for this should be to pass `-Wl,--as-needed` in
`LDFLAGS`. That leads us to the second bug, where libtool passes
`LDFLAGS` after the libraries are specified and `ld` will only honor
`--as-needed` on libraries specified before it:

https://sigquit.wordpress.com/2011/02/16/why-asneeded-doesnt-work-as-expected-for-your-libraries-on-your-autotools-project/

There are a few possible workarounds for the second bug. One is to
either patch the compiler spec file to specify `-Wl,--as-needed` or pass
`-Wl,--as-needed` via `CC` like `CC='gcc -Wl,--as-needed'` so that it is
specified early. Another is to patch ltmain.sh like Gentoo does:

https://gitweb.gentoo.org/repo/gentoo.git/tree/eclass/ELT-patches/as-needed

Without one of those workarounds, this cleanup provides no benefit in
terms of `DT_NEEDED` entry generation. It should still be an improvement
because it nicely simplifies the code while encouraging good habits when
patching autotools scripts.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4426
2016-03-18 13:31:11 -07:00
Brian Behlendorf a9977b37ca Relax MBR partition scanning requirement
When checking a whole disk to see if it can be safely added to
the pool a variety of checks are done.  One of those checks is
to attempt to determine the partition information and scan all
the partitions for existing filesystems.

Since ZoL contains a EFI library this partition scanning is
easy to do for GPT partitioned disks.  However, for non-GPT
partitioned disks (MBR/EBR) things are a bit harder.  The lack of
a convenient library means non-GPT partitioned disks will not
have all their partitions checked.  For this reason, the default
behavior was to require the force option.  For example:

invalid vdev specification
use '-f' to override the following errors:
/dev/vdb does not contain an GPT label but it may contain partition
information in the MBR.

However in practice requiring the force option for this case is
counter-intuitively less safe.  The reason is because only the first
error is returned.  By passing the force option it will suppress
this first warning and potentially others you were not aware of.

Therefore this patch inverts the default behavior for non-GPT
formated disks (unformatted, MBR/EBR, etc).  If no GPT table is
detected and there is no file system detected on the provided
block device.  Then it will be assumed that block device is safe
to use.

Longer term it would be nice to see MBR/EBR scanning added to
the utilities.  This should be fairly straight forward to do.
However these days it's somewhat less critical because Linux
defaults to GPT partition tables for devices 2TB or larger.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2660
Closes #2274
2016-03-10 14:04:58 -08:00
Brian Behlendorf 7d11e37e55 Require libblkid
Historically libblkid support was detected as part of configure
and optionally enabled.  This was done because at the time support
for detecting ZFS pool vdevs had just be added to libblkid and
those updated packages were not yet part of many distributions.
This is no longer the case and any reasonably current distribution
will ship a version of libblkid which can detect ZFS pool vdevs.

This patch makes libblkid mandatory at build time and libblkid
the preferred method of scanning for ZFS pools.  For distributions
which include a modern version of libblkid there is no change in
behavior.  Explicitly scanning the default search paths is still
supported and can be enabled with the '-s' command line option.

Additionally making libblkid mandatory means that the 'zpool create'
command can reliably detect if a specified device has an existing
non-ZFS filesystem (ext4, xfs) and print a warning.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2448
2016-03-09 10:39:22 -08:00
Chris Dunlap 048bb5bd49 Ensure zed _finish_daemonize() leaves fds 0-2 open
In zed's _finish_daemonize(), /dev/null is open()d onto a temporary
file descriptor which is then dup()d onto stdin, stdout, and stderr.
But if file descriptors 0, 1, or 2 are not already open at the start
of this function, then the temporary file descriptor will fall within
this range and be inadvertently closed when the function cleans up.

This commit adds a check to prevent inadvertently closing this
(presumably temporary) file descriptor when it shouldn't.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4384
2016-03-08 17:46:41 -08:00
Brian Behlendorf a77f29f93c Change full path subcommand flag from -p to -P
Commit d2f3e29 introduced the -p option which outputs full paths
for vdevs to multiple zpool subcommands.  When this was merged
there was no conflict for this flag letter.  However it's certain
there will be a conflict with the -p (parsable) flag used by other
subcommands.  Therefore, -p is being changed to -P to avoid this.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4368
2016-02-26 09:06:26 -08:00
Richard Yao d2f3e292dc Add -gLp to zpool subcommands for alt vdev names
The following options have been added to the zpool add, iostat,
list, status, and split subcommands.  The default behavior was
not modified, from zfs(8).

  -g    Display vdev GUIDs  instead  of  the  normal  short
        device  names.  These GUIDs can be used in-place of
        device   names   for    the    zpool    detach/off‐
        line/remove/replace commands.

  -L    Display real paths for vdevs resolving all symbolic
        links. This can be used to lookup the current block
        device  name regardless of the /dev/disk/ path used
        to open it.

  -p    Display  full  paths  for vdevs instead of only the
        last component of the path.  This can  be  used  in
        conjunction with the -L flag.

This behavior may also be enabled using the following environment
variables.

  ZPOOL_VDEV_NAME_GUID
  ZPOOL_VDEV_NAME_FOLLOW_LINKS
  ZPOOL_VDEV_NAME_PATH

This change is based on worked originally started by Richard Yao
to add a -g option.  Then extended by @ilovezfs to add a -L option
for openzfsonosx.  Those changes have been merged, re-factored,
a -p option added and extended to all relevant zpool subcommands.

Original-patch-by: Richard Yao <ryao@gentoo.org>
Extended-by: ilovezfs <ilovezfs@icloud.com>
Extended-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2011
Closes #4341
2016-02-25 11:58:39 -08:00
John Wren Kennedy 8e4c5c9a94 Illumos 5767 - fix several problems with zfs test suite
5767 fix several problems with zfs test suite
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/5767
  https://github.com/illumos/illumos-gate/commit/52244c0

Porting Notes:
- Only the updates to zpool_main.c were kept because the ZFS test
  suite is not currently part of the ZoL source tree.  The test
  suite itself should be updated to include the latest versions
  of the tests once we're running it for every commit
- Fixes `zpool list` output.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-02-08 09:37:55 -08:00
Tim Chase e989f19cba Correctly parse -R flag arguments
Currently, only the 'b' flag takes an argument which is an offset into
the block at which a blkptr should be decoded.  The index into the flag
string needed to be updated after parsing an argument.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4304
2016-02-05 11:29:38 -08:00
Christian Neukirchen d93b45aefc mount.zfs: use getopt_long instead of getopt to guarantee permutation of argv.
mount.zfs is called by convention (and util-linux) with arguments
last, i.e.

  % mount.zfs <dataset> <mountpoint> -o <options>

This is not a problem on glibc since GNU getopt(3) will reorder the
arguments.  However, alternative libc such as musl libc (or glibc with
$POSIXLY_CORRECT set) will not permute argv and fail to parse the -o
<options>.  Use getopt_long so musl will permute arguments.

Signed-off-by: Christian Neukirchen <chneukirchen@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4222
2016-01-25 13:17:18 -08:00
Matthew Ahrens 91d888437f Illumos 6451 - ztest fails due to checksum errors
6451 ztest fails due to checksum errors
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/6451
  https://github.com/illumos/illumos-gate/commit/f9eb9fd

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-25 13:15:49 -08:00
Joe Stein 82f6f6e654 Illumos 6298 - zfs_create_008_neg and zpool_create_023_neg
6298 zfs_create_008_neg and zpool_create_023_neg need to be updated
for large block support
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/6298
  https://github.com/illumos/illumos-gate/commit/e9316f7

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4217
2016-01-15 15:38:35 -08:00
George Wilson 59d4c71cca Illumos 3557, 3558, 3559, 3560
3557 dumpvp_size is not updated correctly when a dump zvol's size is changed
3558 setting the volsize on a dump device does not return back ENOSPC
3559 setting a volsize larger than the space available sometimes succeeds
3560 dumpadm should be able to remove a dump device
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Albert Lee <trisk@nexenta.com>

References:
  https://www.illumos.org/issues/3559
  https://github.com/illumos/illumos-gate/commit/c61ea56

Porting notes:
- Internal zvol.c changes not applied due to implementation differences.
  The external interface and behavior was already consistent with the
  latest upstream code.
- Retired 2.6.28 HAVE_CHECK_DISK_SIZE_CHANGE configure check.  All
  supported kernels (2.6.32 and newer) provide this interface.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4217
2016-01-15 15:38:35 -08:00
Brian Behlendorf 4d6369c167 Illumos 5039 - ztest should default to larger device sizes
5039 ztest should default to larger device sizes
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5039
  https://github.com/illumos/illumos-gate/commit/539eed8

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 14:10:31 -08:00
Matthew Ahrens 9867e8be2a Illumos 4891 - want zdb option to dump all metadata
4891 want zdb option to dump all metadata
Reviewed by: Sonu Pillai <sonu.pillai@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>

We'd like a way for zdb to dump metadata in a machine-readable
format, so that we can bring that back from a customer site for
in-house diagnosis.  Think of it as a crash dump for zpools,
which can be used for post-mortem analysis of a malfunctioning
pool

References:
  https://www.illumos.org/issues/4891
  https://github.com/illumos/illumos-gate/commit/df15e41

Porting notes:
- [cmd/zdb/zdb.c]
  - a5778ea zdb: Introduce -V for verbatim import
  - In main() getopt 'opt' variable removed and the code was
    brought back in line with illumos.
- [lib/libzpool/kernel.c]
  - 1e33ac1 Fix Solaris thread dependency by using pthreads
  - f0e324f Update utsname support
  - 4d58b69 Fix vn_open/vn_rdwr error handling
  - In vn_open() allocate 'dumppath' on heap instead of stack
  - Properly handle 'dump_fd == -1' error path
  - Free 'realpath' after added vn_dumpdir_code block

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 11:36:54 -08:00
Paul Dagnelie fcff0f35bd Illumos 5960, 5925
5960 zfs recv should prefetch indirect blocks
5925 zfs receive -o origin=
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>

References:
  https://www.illumos.org/issues/5960
  https://www.illumos.org/issues/5925
  https://github.com/illumos/illumos-gate/commit/a2cdcdd

Porting notes:
- [lib/libzfs/libzfs_sendrecv.c]
  - b8864a2 Fix gcc cast warnings
  - 325f023 Add linux kernel device support
  - 5c3f61e Increase Linux pipe buffer size on 'zfs receive'
- [module/zfs/zfs_vnops.c]
  - 3558fd7 Prototype/structure update for Linux
  - c12e3a5 Restructure zfs_readdir() to fix regressions
- [module/zfs/zvol.c]
  - Function @zvol_map_block() isn't needed in ZoL
  - 9965059 Prefetch start and end of volumes
- [module/zfs/dmu.c]
  - Fixed ISO C90 - mixed declarations and code
  - Function dmu_prefetch() 'int i' is initialized before
    the following code block (c90 vs. c99)
- [module/zfs/dbuf.c]
  - fc5bb51 Fix stack dbuf_hold_impl()
  - 9b67f60 Illumos 4757, 4913
  - 34229a2 Reduce stack usage for recursive traverse_visitbp()
- [module/zfs/dmu_send.c]
  - Fixed ISO C90 - mixed declarations and code
  - b58986e Use large stacks when available
  - 241b541 Illumos 5959 - clean up per-dataset feature count code
  - 77aef6f Use vmem_alloc() for nvlists
  - 00b4602 Add linux kernel memory support

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-08 15:08:19 -08:00
Brian Behlendorf 00af2ff6f2 Add missing -V option to zdb
Add missing getopt specifier for `zdb -V` verbatim option and
set flag with correct bitwise operator.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-08 12:43:29 -08:00
Hajo Möller 7cf2ffa020 Make arc_summary.py and dbufstat.py compatible with python3
To make arc_summary.py and dbufstat.py compatible with python3
some minor fixes were required, this was done automatically by
`2to3 -w arc_summary.py` and `2to3 -w dbufstat.py`.

Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Reviewed-by: Richard Laager <rlaager@wiktel.com>
2016-01-07 17:09:59 -08:00
Matthew Ahrens 074348589b Illumos 3604 - zdb should print bpobjs more verbosely (fix zdb hang)
3604 zdb should print bpobjs more verbosely (fix zdb hang)
References:
  https://github.com/illumos/illumos-gate/commit/7706186
  https://www.illumos.org/issues/3604
  https://lists.freebsd.org/pipermail/svn-src-vendor/2015-August/002411.html
  https://lists.freebsd.org/pipermail/svn-src-head/2015-August/075195.html

Porting notes:
In ZoL "5810 zdb should print details of bpobj" was merged
prior to this change so it must be applied to the new location.

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-05 11:37:43 -08:00
Milan Jurik cfe86c01d5 Illumos 2077 - lots of unreachable breaks in illumos gate
2077 lots of unreachable breaks in illumos gate
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/2077
  https://github.com/illumos/illumos-gate/commit/33f5ff1

Porting notes:
- Only one file of the original patch applied to ZFS
- Minor formating change to align copyright block with upstream

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-12-30 14:50:26 -08:00
Matthew Ahrens 37f8a8835a Illumos 5746 - more checksumming in zfs send
5746 more checksumming in zfs send
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@omniti.com>

References:
  https://www.illumos.org/issues/5746
  https://github.com/illumos/illumos-gate/commit/98110f0
  https://github.com/zfsonlinux/zfs/issues/905

Porting notes:
- Minor conflicts due to:
  - https://github.com/zfsonlinux/zfs/commit/2024041
  - https://github.com/zfsonlinux/zfs/commit/044baf0
  - https://github.com/zfsonlinux/zfs/commit/88904bb
- Fix ISO C90 warnings (-Werror=declaration-after-statement)
  - arc_buf_t *abuf;
  - dmu_buf_t *bonus;
  - zio_cksum_t cksum_orig;
  - zio_cksum_t *cksump;
- Fix format '%llx' format specifier warning
- Align message in zstreamdump safe_malloc() with upstream

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3611
2015-12-30 14:24:14 -08:00
Chris Williamson 23de906c72 Illumos 5745 - zfs set allows only one dataset property to be set at a time
5745 zfs set allows only one dataset property to be set at a time
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5745
  https://github.com/illumos/illumos-gate/commit/3092556

Porting notes:
- Fix the missing braces around initializer, zfs_cmd_t zc = {"\0"};
- Remove extra format argument in zfs_do_set()
- Declare at the top:
  - zfs_prop_t prop;
  - nvpair_t *elem;
  - nvpair_t *next;
  - int i;
- Additionally initialize:
  - int added_resv = 0;
  - zfs_prop_t prop = 0;
- Assign 0 install of NULL for uint64_t types.
  - zc->zc_nvlist_conf = '\0';
  - zc->zc_nvlist_src = '\0';
  - zc->zc_nvlist_dst = '\0';

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3574
2015-12-29 16:59:26 -08:00
Olaf Faaland a6c6e0f583 Remove "index" column from dbufstat.py
Commit ca0bf58d to address arcs_mtx contention removed column "index"
from the output of kstats/dbuf.

dbufstat.py was not updated to reflect this, which causes it to crash
when run with -bx

This removes "index" from hardcoded lists of columns.

Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4096
2015-12-15 14:40:21 -08:00
Richard Yao 799402d8c7 Revert "Switch ztest mmap(2) ASSERTs to VERIFYs"
This reverts commit 2026196230.

It is no longer necessary now that we pass -DDEBUG unconditionally.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4095
2015-12-14 12:53:14 -08:00
Richard Yao 27075111ed Unconditionally build zdb and ztest with -DDEBUG
Illumos unconditionally builds zdb and ztest with -DDEBUG. This helps
catch bugs and eliminates the need for commits like
2026196230, which changed ASSERTs to
VERIFYs. The following files in the illumos tree show this:

usr/src/cmd/zdb/Makefile.com
usr/src/cmd/ztest/Makefile.com

Given the usefulness of having early failure in these tools, we should
do it too.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4095
2015-12-14 12:53:09 -08:00
cable2999 f40926795c Update arcstat.py to remove deprecated rmis reference.
Running arcstat.py -x currently throws KeyError due to rmis being
absent, it was removed in commit ca0bf58.

Signed-off-by: cable2999 <cable2999@users.noreply.github.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3931
2015-12-04 15:28:45 -08:00
Matthew Ahrens 241b541574 Illumos 5959 - clean up per-dataset feature count code
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5959
  https://github.com/illumos/illumos-gate/commit/ca0cc39

Porting notes:

illumos code doesn't check for feature_get_refcount() returning
ENOTSUP (which means feature is disabled) in zdb. zfsonlinux added
a check in https://github.com/zfsonlinux/zfs/commit/784652c
due to #3468. The check was reintroduced here.

Ported-by: Witaut Bajaryn <vitaut.bayaryn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3965
2015-12-04 14:20:20 -08:00
Chunwei Chen a179a3aa35 Fix zdb_dump_block on little endian systems
When dumping a block on a little endian system the data must be
byte swapped to display correctly.  Example incorrect output:

$ echo 0123456789abcdef > aaa
$ zdb -eR pp 3:1ee00:200
3:1ee00:200
          0 1 2 3 4 5 6 7   8 9 a b c d e f  0123456789abcdef
000000:  3736353433323130  6665646362613938  0123456789abcdef
000010:  000000000000000a  0000000000000000  ................

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4020
2015-12-02 17:02:28 -08:00
Chunwei Chen 90aa094d6d Fix zdb calling behavior in ztest
The current zdb calling behaviour is really fragile, and is guaranteed to
segfault if ztest is not installed in either /sbin or /usr/sbin. With this
patch, the ztest will try to call zdb in the following order.

1. Use environmental variable ZDB_PATH if provided.
2. If ztest resides in build tree, guess the in tree zdb path.
3. Just pass zdb to popen and let it search it in PATH.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3126
2015-12-02 14:50:36 -08:00
Tim Chase 2986b3fd25 zdb: segfault in dump_bpobj_subobjs()
Avoid buffer overrun on all-zero bpobj subobjects by using signed
array index.  Also fix the type cast on the printf() argument.

Signed-off-by: Tim Chase <tim@onlight.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3905
2015-10-13 09:56:51 -07:00
Don Brady 56b3986316 Add large block support to zpios(1) benchmark
As part of the large block support effort, it makes sense to add
support for large blocks to **zpios(1)**. The specifying of a zfs
block size for zpios is optional and will default to 128K if the
block size is not specified.

  `zpios ... -S size | --blocksize size ...`

This will use *size* ZFS blocks for each test, specified as a comma
delimited list with an optional unit suffix. The supported range is
powers of two from 128K through 16M. A range of block sizes can be
tested as follows: `-S 128K,256K,512K,1M`

Example run below
(non realistic results from a VM and output abbreviated for space)

```
 --regioncount=750 --regionsize=8M --chunksize=1M --offset=4K
 --threaddelay=0 --cleanup --human-readable --verbose --cleanup
 --blocksize=128K,256K,512K,1M

 th-cnt  rg-cnt  rg-sz  ch-sz  blksz  wr-data wr-bw   rd-data rd-bw
---------------------------------------------------------------------
 4       750     8m     1m     128k   5g      90.06m  5g      93.37m
 4       750     8m     1m     256k   5g      79.71m  5g      99.81m
 4       750     8m     1m     512k   5g      42.20m  5g      93.14m
 4       750     8m     1m     1m     5g      35.51m  5g      89.36m
 8       750     8m     1m     128k   5g      85.49m  5g      90.81m
 8       750     8m     1m     256k   5g      61.42m  5g      99.24m
 8       750     8m     1m     512k   5g      49.09m  5g     108.78m
 16      750     8m     1m     128k   5g      86.28m  5g      88.73m
 16      750     8m     1m     256k   5g      64.34m  5g      93.47m
 16      750     8m     1m     512k   5g      68.84m  5g     124.47m
 16      750     8m     1m     1m     5g      53.97m  5g      97.20m
---------------------------------------------------------------------
```

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3795
Closes #2071
2015-09-22 09:13:20 -07:00
Remy Blank e7a05183c4 Tab-indent continuation lines in the "scan:" section of "zpool status".
All other sections use a tab, which makes them easy to parse. Only the
"scan:" section had its continuation lines indented with four spaces.
This makes them consistent with the others.

Signed-off-by: Remy Blank <remy.blank@pobox.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #3769
2015-09-19 14:17:07 -07:00
Brian Behlendorf 3b36f8319d Add dbgmsg kstat
Internally ZFS keeps a small log to facilitate debugging.  By default
the log is disabled, to enable it set zfs_dbgmsg_enable=1.  The contents
of the log can be accessed by reading the /proc/spl/kstat/zfs/dbgmsg file.
Writing 0 to this proc file clears the log.

$ echo 1 >/sys/module/zfs/parameters/zfs_dbgmsg_enable
$ echo 0 >/proc/spl/kstat/zfs/dbgmsg
$ zpool import tank
$ cat /proc/spl/kstat/zfs/dbgmsg
1 0 0x01 -1 0 2492357525542 2525836565501
timestamp    message
1441141408   spa=tank async request task=1
1441141408   txg 70 open pool version 5000; software version 5000/5; ...
1441141409   spa=tank async request task=32
1441141409   txg 72 import pool version 5000; software version 5000/5; ...
1441141414   command: lt-zpool import tank

Note the zfs_dbgmsg() and dprintf() functions are both now mapped to
the same log.  As mentioned above the kernel debug log can be accessed
though the /proc/spl/kstat/zfs/dbgmsg kstat.  For user space consumers
log messages are immediately written to stdout after applying the
ZFS_DEBUG environment variable.

$ ZFS_DEBUG=on ./cmd/ztest/ztest -V

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #3728
2015-09-04 16:08:14 -07:00
Brian Behlendorf 0282c4137e Add temporary mount options
Add the required kernel side infrastructure to parse arbitrary
mount options.  This enables us to support temporary mount
options in largely the same way it is handled on other platforms.

See the 'Temporary Mount Point Properties' section of zfs(8)
for complete details.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #985
Closes #3351
2015-09-03 14:14:55 -07:00
Andreas Buschmann bba365cfc8 Add extra keyword 'slot' to vdev_id.conf
Add new keyword 'slot' to vdev_id.conf
This selects from where to get the slot number for a SAS/SATA disk
Needed to enable access to the physical position of a disk in a
Supermicro 2027R-AR24NV .

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #3693
2015-08-30 10:03:56 -07:00
Tim Chase 6bec4351f5 ztest: display non-index properties properly at verbose level 6
At verbosity levels of 6 or greater, ztest_dsl_prop_set_uint64() attempts
to display the value of all properties as indexed values regardless of
whether the property is an indexed value or simply an un-indexed integer.
This patch causes the numeric value of the property to be displayed if
zfs_prop_index_to_string() fails.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3649
2015-07-30 14:34:09 -07:00
Chris Dunlap 69520d6855 Rework zed_notify_email for configurable PROG/OPTS
This commit reworks the zed_notify_email() function to allow
configuration of the mail executable and command-line arguments.

ZED_EMAIL_PROG specifies the name or path of the executable responsible
for sending notifications via email.  This variable defaults to "mail".

ZED_EMAIL_OPTS specifies command-line options passed to ZED_EMAIL_PROG.
The following keyword substitutions are performed:
- @ADDRESS@ is replaced with the recipient email address(es)
- @SUBJECT@ is replaced with the notification subject
This variable defaults to "-s '@SUBJECT@' @ADDRESS@".

ZED_EMAIL_ADDR replaces ZED_EMAIL (although the latter is retained
for backward compatibility).  This variable can contain multiple
addresses as long as they are delimited by whitespace.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3634
Closes #3631
2015-07-30 11:52:56 -07:00
Chris Dunlap 6f1eccff2c Fix whitespace in zed_log_err
This commit fixes the two adjacent spaces that appear in zed_log_err()
messages when ZEVENT_EID is undefined.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-07-30 11:52:35 -07:00
Turbo Fredriksson 47a4a6fd5f Support parallel build trees (VPATH builds)
Build products from an out of tree build should be written
relative to the build directory.  Sources should be referred
to by their locations in the source directory.

This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile.  This enables the following:

  $ mkdir build
  $ cd build
  $ ../configure \
    --with-spl=$HOME/src/git/spl/ \
    --with-spl-obj=$HOME/src/git/spl/build
  $ make -s

This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.

  Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
  Makefile.am:00: but option 'subdir-objects' is disabled

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1082
2015-07-17 13:42:51 -07:00
Prasad Joshi eaa52d32b0 Illumos 1765 - assert triggered in libzfs_import.c
1765 assert triggered in libzfs_import.c trying to import pool
name beginning with a number
Reviewed-by: Garrett D'Amore <garrett@damore.org>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://github.com/illumos/illumos-gate/commit/9edf9eb
  https://www.illumos.org/issues/1765

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3562
2015-07-14 10:23:29 -07:00
Basil Crow de0a9d7630 Illumos 5118 - When verifying or creating a storage pool, error messages only show one device
5118 When verifying or creating a storage pool, error messages
only show one device
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Boris Protopopov <boris.protopopov@me.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://github.com/illumos/illumos-gate/commit/75fbdf9
  https://www.illumos.org/issues/5118

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3567
2015-07-10 12:07:13 -07:00
George Wilson 3e43edd2c5 Illumos 4966 - zpool list iterator does not update output
4966 zpool list iterator does not update output
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://github.com/illumos/illumos-gate/commit/cd67d23
  https://www.illumos.org/issues/4966

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3566
2015-07-10 12:00:35 -07:00
Don Brady 017da6f063 Fix for recent zdb -h | -i crashes (seg fault)
Allocating SPA_MAXBLOCKSIZE on the stack is a bad idea (even with the
old 128K size). Use malloc instead when allocating temporary block
buffer memory.

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3522
2015-06-26 14:14:31 -07:00
Don Brady 784652c1f0 zdb -d has false positive warning when feature@large_blocks=disabled
Skip large blocks feature refcount checking if feature is disabled.

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3468
2015-06-26 14:10:31 -07:00
Brian Behlendorf 5d6a460362 Unify mount and share for 'zfs create/clone'
Both the 'zfs create' and 'zfs clone' commands are expected to
automatically mount and share new filesystems.  Since this is common
functionality it has been moved in to a shared helper function.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3459
2015-06-17 11:01:16 -07:00
Hajo Möller 410921241d Add -y option to `zpool iostat`
sysstat's iostat omits the first report when the -y option is used.
This patch adds that functionality and omits the first report with
statistics since system boot.

Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3439
2015-06-17 10:39:20 -07:00
Prakash Surya ca0bf58d65 Illumos 5497 - lock contention on arcs_mtx
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>

Porting notes and other significant code changes:

The illumos 5368 patch (ARC should cache more metadata), which
was never picked up by ZoL, is mostly reverted by this patch.

Since ZoL relies on the kernel asynchronously calling the shrinker to
actually reap memory, the shrinker wakes up arc_reclaim_waiters_cv every
time it runs.

The arc_adapt_thread() function no longer calls arc_do_user_evicts()
since the newly-added arc_user_evicts_thread() calls it periodically.

Notable conflicting ZoL commits which conflicted with this patch or
whose effects are either duplicated or un-done by this patch:

    302f753 - Integrate ARC more tightly with Linux
    39e055c - Adjust arc_p based on "bytes" in arc_shrink
    f521ce1 - Allow "arc_p" to drop to zero or grow to "arc_c"
    77765b5 - Remove "arc_meta_used" from arc_adjust calculation
    94520ca - Prune metadata from ghost lists in arc_adjust_meta

Trace support for multilist_insert() and multilist_remove() has been
added and produces the following output:

    fio-12498 [077] .... 112936.448324: zfs_multilist__insert: ml { offset 240 numsublists 80 sublistidx 63 }
    fio-12498 [077] .... 112936.448347: zfs_multilist__remove: ml { offset 240 numsublists 80 sublistidx 29 }

The following arcstats have been removed:

    recycle_miss - Used by arcstat.py and arc_summary.py, both of which
    have been updated appropriately.

    l2_writes_hdr_miss

The following arcstats have been added:

    evict_not_enough - Number of times arc_evict_state() was unable to
    evict enough buffers to reach its target amount.

    evict_l2_skip - Number of times arc_evict_hdr() skipped eviction
    because it was being written to the l2arc.

    l2_writes_lock_retry - Replaces l2_writes_hdr_miss.  Number of times
    l2arc_write_done() failed to acquire hash_lock (and re-tries).

    arc_meta_min - Shows the value of the zfs_arc_meta_min module
    parameter (see below).

The "index" column of the "dbuf" kstat has been removed since it doesn't
have a direct analog in the new multilist scheme.  Additional multilist-
related stats could be added in the future but would likely require
extensions to the mulilist API.

The following module parameters have been added:

    zfs_arc_evict_batch_limit - Number of ARC headers to free per sub-list
    before moving on to the next sub-list.

    zfs_arc_meta_min - Enforce a floor on the amount of metadata in
    the ARC.

    zfs_arc_num_sublists_per_state - Number of multilist sub-lists per
    ARC state.

    zfs_arc_overflow_shift - Controls amount by which the ARC must exceed
    the target size to be considered "overflowing".

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov
2015-06-11 10:27:25 -07:00
Chris Williamson b9541d6b7d Illumos 5408 - managing ZFS cache devices requires lots of RAM
5408 managing ZFS cache devices requires lots of RAM
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

Porting notes:

Due to the restructuring of the ARC-related structures, this
patch conflicts with at least the following existing ZoL commits:

    6e1d7276c9
    Fix inaccurate arcstat_l2_hdr_size calculations

        The ARC_SPACE_HDRS constant no longer exists and has been
        somewhat equivalently replaced by HDR_L2ONLY_SIZE.

    e0b0ca983d
    Add visibility in to cached dbufs

        The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr
        struct requires additional structure member names to be used
        when referencing the inner items.  Also, the presence of L1 or L2
        inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR
        macros.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-11 10:27:25 -07:00
George Wilson 2a4324141f Illumos 5369 - arc flags should be an enum
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

Porting notes:

ZoL has moved some ARC definitions into arc_impl.h.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Tim Chase <tim@chase2k.com>
2015-06-11 10:27:25 -07:00
Matthew Ahrens c3520e7f1f Illumos 5818 - zfs {ref}compressratio is incorrect with 4k sector size
5818 zfs {ref}compressratio is incorrect with 4k sector size
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Albert Lee <trisk@omniti.com>

References:
  https://www.illumos.org/issues/5818
  https://github.com/illumos/illumos-gate/commit/81cd5c5

Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3432
2015-06-10 16:24:01 -07:00
Brian Behlendorf 65037d9b25 Add libzfs_error_init() function
All fprintf() error messages are moved out of the libzfs_init()
library function where they never belonged in the first place.  A
libzfs_error_init() function is added to provide useful error
messages for the most common causes of failure.

Additionally, in libzfs_run_process() the 'rc' variable was renamed
to 'error' for consistency with the rest of the code base.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-05-22 13:34:58 -07:00
Matthew Ahrens e5fd1dd682 Illumos 5243 - zdb -b could be much faster
5243 zdb -b could be much faster
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5243
  https://github.com/illumos/illumos-gate/commit/f7950bf

Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3414
2015-05-15 11:14:54 -07:00
Tim Chase b1b85c8772 Zdb should be able to open the root dataset
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", it is interpreted as the root dataset.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3415
2015-05-15 10:52:46 -07:00
Matthew Ahrens 252e1a54ab Illumos 5810 - zdb should print details of bpobj
5810 zdb should print details of bpobj
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/5810
  https://github.com/illumos/illumos-gate/commit/732885fc

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3387
2015-05-11 15:10:24 -07:00
Chris Dunlap 492b1d2ef0 Update ZED copyright boilerplate
This commit updates the copyright boilerplate within the ZED subtree.

The instructions for appending a contributor copyright line have
been removed.  Manually maintaining copyright notices in this
manner is error-prone, imprecise at a file-scope granularity, and
oftentimes inaccurate.  These lines can become a pernicious source of
merge conflicts.  A commit log is better suited to maintaining this
information.  Consequently, a line has been added to the boilerplate
to refer to the git commit log for authoritative copyright attribution.

To account for the scenario where a file may become separated from
the codebase and commit history (i.e., it is copied somewhere else),
a line has been added to identify the file's origin.

http://softwarefreedom.org/resources/2012/ManagingCopyrightInformation.html

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3384
2015-05-11 15:07:00 -07:00
Brian Behlendorf 76d520675e ztest should randomly change recordsize
Improve the large block feature test coverage by extending ztest
to frequently change the recordsize.  This is specificially designed
to catch corner cases which might otherwise go unnoticed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #354
2015-05-11 12:23:16 -07:00
Matthew Ahrens f1512ee61e Illumos 5027 - zfs large block support
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5027
  https://github.com/illumos/illumos-gate/commit/b515258

Porting Notes:

* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.

* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes.  Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.

* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize.  This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.

* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX.  This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing.  Therefore, we've set DMU_MAX_ACCESS to 64M.

* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space.  We should be able to relax
this one the ABD patches are merged.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #354
2015-05-11 12:23:16 -07:00
Turbo Fredriksson 859735c095 Add the '-a' option to 'zpool export'
Support exporting all imported pools in one go, using 'zpool export -a'.

This is accomplished by moving the export parts from zpool_do_export()
in to the new function zpool_export_one().  The for_each_pool() function
is used to enumerate the list of pools to be exported.  Passing an argc
of 0 implies the function should be called on all pools.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #3203
2015-05-04 10:17:08 -07:00
Matthew Ahrens 3d45fdd6c0 Illumos 4951 - ZFS administrative commands should use reserved space
4951 ZFS administrative commands should use reserved space, not with ENOSPC
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4373
  https://github.com/illumos/illumos-gate/commit/7d46dc6

Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-05-04 09:41:10 -07:00
Max Grossman cfec5b17b3 Illumos 4373 - add block contents print to zstreamdump
4373 add block contents print to zstreamdump
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Dan McDonald <danmcd@nexenta.com>

References:
  https://www.illumos.org/issues/4373
  https://github.com/illumos/illumos-gate/commit/994fb6b

Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-05-04 09:41:10 -07:00
Matthew Ahrens 83017311e4 Illumos 3654,3656
3654 zdb should print number of ganged blocks
3656 remove unused function zap_cursor_move_to_key()
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/3654
  https://www.illumos.org/issues/3656
  https://github.com/illumos/illumos-gate/commit/d5ee8a1

Porting Notes:

3655 and 3657 were part of this commit but those hunks were dropped
since they apply to mdb.

Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-05-04 09:41:09 -07:00
Justin T. Gibbs d683ddbb72 Illumos 5314 - Remove "dbuf phys" db->db_data pointer aliases in ZFS
5314 Remove "dbuf phys" db->db_data pointer aliases in ZFS
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <willa@spectralogic.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5314
  https://github.com/illumos/illumos-gate/commit/c137962

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:25:20 -07:00
Matthew Ahrens 308a451f7f Illumos 5134 - if ZFS_DEBUG or debug= is set, libzpool should enable debug prints
5134 if ZFS_DEBUG or debug= is set, libzpool should enable debug prints
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/projects/illumos-gate/issues/5134
  https://github.com/illumos/illumos-gate/commit/7fa49ea

Porting notes:
  Added dprintf_setup() to main in zfs_main.c and zpool_main.c.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2669
2015-04-28 10:13:40 -07:00
Chris Dunlap ce119da33d Combine data-notify.sh with io-notify.sh
The data-notify.sh ZEDLET serves a very similar purpose to
io-notify.sh, namely, to generate a notification in response to a
particular error event.  Initially, data-notify.sh was separated from
io-notify.sh since the "data" zevent does not (as I understand it)
pertain to a specific vdev device.  This stands in contrast to the
"checksum" and "io" zevents (both handled by io-notify.sh) that can
be attributed to a specific vdev.  At the time, it seemed simpler to
handle these two cases in separate scripts.

This commit adds support for the "data" zevent to io-notify.sh, and
symlinks io-notify.sh to data-notify.sh.  It also adds the counts
for vdev_read_errors, vdev_write_errors, and vdev_cksum_errors to
the notification message.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-04-27 12:08:08 -07:00
Chris Dunlap 090b19158a Add notification to io-spare.sh
The io-spare.sh ZEDLET does not generate a notification when a failing
device is replaced with a hot spare.  Maybe it should tell someone.

This commit adds a notification message to the io-spare.sh ZEDLET.
This notification is triggered when a failing device is successfully
replaced with a hot spare after encountering a checksum or io error.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-04-27 12:08:08 -07:00
Chris Dunlap a0d065fa92 Add support for Pushbullet notifications
This commit adds the zed_notify_pushbullet() function and hooks
it into zed_notify(), thereby integrating it with the existing
"notify" ZEDLETs.  This enables ZED to push notifications to your
desktop computer and/or mobile device(s).  It is configured with the
ZED_PUSHBULLET_ACCESS_TOKEN and ZED_PUSHBULLET_CHANNEL_TAG variables
in zed.rc.

  https://www.pushbullet.com/

The Makefile install-data-local target has been replaced with
install-data-hook.  With the "-local" target, there is no particular
guarantee of execution order.  But with the zed.rc now potentially
containing sensitive information (i.e., the Pushbullet access token),
the recommended permissions have changed to 0600.  The "-hook" target
is always executed after the main rule's work is done; thus, the
chmod will always take place after the zed.rc file has been installed.

  https://www.gnu.org/software/automake/manual/automake.html#Extending

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-04-27 12:08:08 -07:00
Chris Dunlap 20967ff1a4 Replace "email" ZEDLETs with "notify" ZEDLETs
Several ZEDLETs already exist for sending email in reponse to a
particular zevent.  While email is ubiquitous, alternative methods may
be better suited for some configurations.  Instead of duplicating the
"email" ZEDLETs for every future notification method, it is preferable
to abstract the notification method into a function.  This has the
added benefit of reducing the amount of code duplicated between
ZEDLETs, and allowing related bugs to be fixed in a single location.

This commit replaces the existing "email" ZEDLETs with corresponding
"notify" ZEDLETs.  In addition, the ZEDLET code for sending an
email message has been moved into the zed_notify_email() function.
And this zed_notify_email() has been added to a generic zed_notify()
function for sending notifications via all available methods that
have been configured.

This commit also changes a couple of related zed.rc variables.
ZED_EMAIL_INTERVAL_SECS is changed to ZED_NOTIFY_INTERVAL_SECS,
and ZED_EMAIL_VERBOSE is changed to ZED_NOTIFY_VERBOSE.  Note that
ZED_EMAIL remains unchanged as its use is solely for the email
notification method.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-04-27 12:08:07 -07:00
Chris Dunlap aded9a6814 Cleanup ZEDLETs
This commit factors out several common ZEDLET code blocks into
zed-functions.sh.  This shortens the length of the scripts, thereby
(hopefully) making them easier to understand and maintain.

In addition, this commit revamps the coding style used by the
scripts to be more consistent and (again, hopefully) maintainable.
It now mostly follows the Google Shell Style Guide.  I've tried to
assimilate the following resources:

  Google Shell Style Guide
  https://google-styleguide.googlecode.com/svn/trunk/shell.xml

  Dash as /bin/sh
  https://wiki.ubuntu.com/DashAsBinSh

  Filenames and Pathnames in Shell: How to do it Correctly
  http://www.dwheeler.com/essays/filenames-in-shell.html

  Common shell script mistakes
  http://www.pixelbeat.org/programming/shell_script_mistakes.html

Finally, this commit updates the exit codes used by the ZEDLETs to be
more consistent with one another.

All scripts run cleanly through ShellCheck <http://www.shellcheck.net/>.
All scripts have been tested on bash and dash.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-04-27 12:08:01 -07:00
Isaac Huang c5656c4cfc Memory leak in make_root_vdev()
The newroot nvlist should be freed before returning.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3264
2015-04-27 09:18:02 -07:00
Paul B. Henson 0bf8501ae1 5410 Document -S option to zfs inherit
5410 Document -S option to zfs inherit
5412 Mention -S option when zfs inherit fails on quota
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5410
  https://github.com/illumos/illumos-gate/commit/5ff8cfa9

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3279
2015-04-24 15:16:49 -07:00
Chris Dunlap de6d197683 Fix io-spare.sh to work with disk vdevs
The "zpool status" output shows the full pathname for file-type vdevs,
but only the basename component for disk-type vdevs.  In commit
bee6665, the "basename" command was dropped from altering the vdev
name used when searching the "zpool status" output.  Consequently,
hot-disk sparing for disk vdevs broke since "zpool status" output
was now being searched for the full pathname to the disk vdev.

Parsing the "zpool status" output in this manner is rather brittle.
It would be preferable to search for the vdev based on its guid.
But until that happens, this commit adds back the "basename" command
to fix the vdev name breakage.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3310
2015-04-17 14:21:26 -07:00
Prakash Surya a4069eef2e Illumos 5695 - dmu_sync'ed holes do not retain birth time
5695 dmu_sync'ed holes do not retain birth time
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5695
  https://github.com/illumos/illumos-gate/commit/70163ac

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3229
2015-03-27 14:51:34 -07:00
Ned Bass 9540be9b23 zpool import should honor overlay property
Make the 'zpool import' command honor the overlay property to allow
filesystems to be mounted on a non-empty directory. As it stands now
this property is only checked by the 'zfs mount' command.  Move the
check into 'zfs_mount()` in libzpool so the property is honored for all
callers.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3227
2015-03-27 14:46:58 -07:00
Brian Behlendorf 7d90f569b3 Check all vdev labels in 'zpool import'
When using 'zpool import' to scan for available pools prefer vdev names
which reference vdevs with more valid labels.  There should be two labels
at the start of the device and two labels at the end of the device.  If
labels are missing then the device has been damaged or is in some other
way incomplete.  Preferring names with fully intact labels helps weed out
bad paths and improves the likelihood of being able to import the pool.

This behavior only applies when scanning /dev/ for valid pools.  If a
cache file exists the pools described by the cache file will be used.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Closes #3145
Closes #2844
Closes #3107
2015-03-25 14:52:52 -07:00
Turbo Fredriksson 02bd676df1 Install arc_summary.py
Add the arc_summary Makefile to the build system so the script is
properly included in the distribution tarball and installed.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3147
2015-03-03 13:38:17 -08:00
Tim Chase fdc5d98253 Avoid dladdr() in ztest
Under Linux, at least, dladdr() doesn't reliably work for functions which
aren't in a DSO.  Add the function name to ztest_info[].

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3130
2015-02-27 13:54:15 -08:00
Tim Chase e02b533e74 Enhancements to zpool dry run mode.
In dry run mode, zpool should display more of the proposed pool
configuration for "zpool add".  This commit adds support for displaying
cache devices.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1106
2015-02-11 14:05:17 -08:00
Chunwei Chen aa506dcb3d Fix build error when make deb
After 53698a4, the following error occurs when make deb.

  CCLD     zed
../../lib/libzfs/.libs/libzfs.so: undefined reference to `get_system_hostid'

Add libzpool.la to zed/Makefile.am to fix this

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3080
2015-02-06 09:16:32 -08:00
Chunwei Chen 53698a453d Read spl_hostid module parameter before gethostid()
If spl_hostid is set via module parameter, it's likely different from
gethostid(). Therefore, the userspace tool should read it first before
falling back to gethostid().

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3034
2015-02-04 16:44:53 -08:00
Chris Dunlap 2c41df5bf8 Cleanup _zed_event_add_nvpair()
When _zed_event_add_var() was updated to be the common routine
for adding zedlet environment variables, an additional snprintf()
was added to the processing of each nvpair.  This commit changes
_zed_event_add_nvpair() to directly call _zed_event_add_var()
for nvpair non-array types, thereby removing a superfluous call to
snprintf().  For consistency, the helper functions for converting
nvpair array types are similarly adjusted to add variables.

The _zed_event_value_is_hex() and _zed_event_add_var() functions have
been moved up in the file since forward declarations are not used,
but no changes have been made to these functions.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3042
2015-01-30 14:46:44 -08:00
Chris Dunlap 854f30a91f Protect against adding duplicate strings in ZED
The zed_strings container stores strings in an AVL, but does not
check for duplicate strings being added.  Within the AVL, strings
are indexed by the string value itself.  avl_add() requires the node
being added must not already exist in the tree, and will assert()
if this is not the case.

This should not cause problems in practice.  ZED uses this container
in two places.  In zed_conf.c, it is used to store the names of
enabled zedlets as zed scans the zedlet directory listing; duplicate
entries cannot occur here since duplicate names cannot occur within
a directory.  In zed_event.c, it is used to store the environment
variables (as "NAME=VALUE" strings) that will be passed to zedlets;
duplicate strings here should never happen unless there is a bug
resulting in a duplicate nvpair or environment variable.

This commit protects against adding a duplicate to a zed_strings
container by first checking for the string being added, and removing
the previous entry should one exist.  This implements a "last one
wins" policy.

This commit also changes the prototype for zed_strings_add() to allow
the string key (by which it is indexed in the AVL) to differ from
the string value.  By adding zedlet environment variables using the
variable name as the key, multiple adds for the same variable name
will result in only the last value being stored.

Finally, this commit routes all additions of zedlet environment
variables through the updated _zed_event_add_var().  This ensures
all zedlet environment variable names are properly converted.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3042
2015-01-30 14:46:17 -08:00
Kyle Blatter a644585549 Replace sysctl summary with tunables summary.
The original script displayed tunable parameters using sysctl calls.
This patch modifies this by displaying tunable parameters found in
/sys/modules/zfs/parameters/. modinfo calls are used to capture
descriptions.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-01-28 11:05:53 -08:00
Kyle Blatter 65dc685a1d Force all lines to be 80 columns
Ensure this script conforms to the projects style guidelines
by limiting line length to 80 columns.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-01-28 11:03:14 -08:00
Kyle Blatter 6427f39fe0 Add a help option with usage information
Add a basic help option and usage description which is consistent
with arcstat.py and dbufstat.py.  This also adds support for long
opts.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-01-28 11:00:11 -08:00
Kyle Blatter 3bfc7f1b20 Refactor arc_summary to simplify -p processing
The -p option is used to specify a specific page of output to be
displayed. If omitted, all output pages would be displayed.

arc_summary, as it stood, had really kludgy processing code for
processing the -p option. It relied on a try-except block which was
treated as an if statement and in normal operation would fail any time a
user didn't specify the -p option on the command line. When the
exception was thrown, the script would then display all output pages.
This happened whether the -p option was omitted or malformed. Thus, in
the principle use case, an exception would be raised in order to run the
script as desired. The same except code would be called regardless of
the exception, however, and malformed -p arguments would also cause the
script to execute.

Additionally, this required the function which handles the case where
all output pages were to be displayed, _call_all, to be potentially
called from several locations within main.

This commit refactors the option processing code to simplify it and make
it easier to catch runtime errors in the script. This is done by
specializing the try-except block to only have an exception when the -p
argument is malformed. When the -p option is correctly selected by the
user, it calls a function in the unSub array directly, which will only
display one page of output.

Finally in the context of this refactoring the page breaks have been
removed.  Pages seem to have been added into the output in the FreeNAS
version of the script. This patch removes pages from the output to more
closely resemble the freebsd version of the script.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-01-28 10:59:19 -08:00
cburroughs 53dc1139e7 Modified arc_summary.py to run on linux
1) Comment out stat sections whose kstats are not currently available
2) Port most of arc_summary to use spl kstats
3) Enable l2arc stats
5) Include compressed l2size
4) Minor style fixes / cleanup

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cburroughs <chris.burroughs@gmail.com>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-01-28 10:27:44 -08:00
cburroughs edd5b80d07 Add arc_summary.py from FreeNAS
The arc_summary script is a useful utility for administrators on
other ZFS platforms.  It provides a quick and easy way to get a high
level view of the current ARC state.

Historically this was a perl script but it was rewritten in python
for FreeNAS.  We've decided to adopt the python version instead of
the perl version for a few reasons.

1) ZoL has no existing perl dependencies, but it does have a python
   dependency for scripts such as arcstat.py and dbufstat.py.  Using
   python for arc_summary.py helps us minimize dependencies.

2) Most major Linux distributions already depend heavily on python
   for their core infrastructure.  This means it's very likely to
   be available even very early in the boot process.

Original source:
  https://github.com/freenas/freenas/blob/master/gui/tools/arc_summary.py

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cburroughs <chris.burroughs@gmail.com>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-01-28 09:33:00 -08:00
Ned Bass 2d9d57b0fb vdev_id: use mawk-compatible regular expression
Slot mapping in vdev_id doesn't work on systems using mawk as the 'awk'
alternative. A regular expression in map_slot() contains an unquoted
empty string following the alternation (|) operator, which results in an
"missing operand" error with mawk. The solution is to rearrange the
expression so the alternation has two operands.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/pkg-zfs#136
Closes zfsonlinux/zfs#2965
2014-12-19 12:05:16 -08:00
Brian Behlendorf 5c7afad448 Fix cstyle issue from c66989b
Commit c66989b accidentally introduced a cstyle issue which went
unnoticed.  This tiny patch corrects that oversight.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-19 12:00:14 -08:00
Jacek Fefliński c66989baae zpool upgrade return errors to stderr instead of stdout
Signed-off-by: Jacek Feflinski <feflik@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2955
2014-12-18 17:38:18 -08:00
Isaac Huang a82db4e15f Print header properly when terminal resizes
Added a handler for SIGWINCH, so that one header
is printed per screen even when the terminal resizes.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2847
2014-11-14 15:32:30 -08:00
Isaac Huang 1c49ac575d Fix inaccurate field descriptions
The field descriptions from arcstat.py -v for the demand accesses
are inaccurate. They all begin with "Demand Data" yet the fields
actually covered both demand data and demand meta-data accesses.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2842
2014-11-14 15:09:09 -08:00
Dan Swartzendruber 5f91bd3dea Improve zvol symlink handling.
Change the zvol helper program to replace any embedded spaces
in the pool or dataset names with '+' to ensure we have valid
symlinks.

The '+' character was choosen because it is not a valid character
for a dataset name but it is allowed by udev.  This ensures that
all dataset names with an embedded space will be translated to
a unique /dev/zvol/ symlink.

Signed-off-by: Dan Swartzendruber <dswartz@druber.com>
Signed-off-by: Darik Horn <dajhorn@vanadac.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2834
2014-11-06 11:13:18 -08:00
Richard Yao 60e9f69c97 Make directory into which mount.zfs is installed configurable
Installing outside of the prefix is not permissible under Gentoo Prefix.
The package manager will cause the installation process to fail if/when
it sees this. I could script a workaround inside the ebuild, but it
seemed to make more sense to make this more configurable.

Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
2014-10-28 09:40:59 -07:00
Matthew Ahrens 9635861742 Illumos 5164-5165 - space map fixes
5164 space_map_max_blksz causes panic, does not work
5165 zdb fails assertion when run on pool with recently-enabled
     space map_histogram feature
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5164
  https://www.illumos.org/issues/5165
  https://github.com/illumos/illumos-gate/commit/b1be289

Porting Notes:

The metaslab_fragmentation() hunk was dropped from this patch
because it was already resolved by commit 8b0a084.

The comment modified in metaslab.c was updated to use the correct
variable name, space_map_blksz.  The upstream commit incorrectly
used space_map_blksize.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2697
2014-10-23 15:30:32 -07:00
Alex Reece b02fe35d37 Illumos 4958 zdb trips assert on pools with ashift >= 0xe
4958 zdb trips assert on pools with ashift >= 0xe
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4958
  https://github.com/illumos/illumos-gate/commit/2a104a5

Porting notes:

Keep the ZIO_FLAG_FASTWRITE define.  This is for a feature present
in Linux but not yet in *BSD.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2697
2014-10-23 15:30:32 -07:00
Brian Behlendorf adc90e9d94 Fix zdb segfault
On 32-bit systems setting 'zfs_arc_max = 256M' in zdb results in the
following segmentation fault.  Rather than reverting 0ec0724 which
introduced this flaw this code is only used for 64-bit builds.

Segmentation fault (core dumped)
ztest: '/sbin/zdb -bcc -d -U /var/tmp/zpool.cache ztest' exit code 139
child exited with code 3

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-10-23 15:30:32 -07:00
Matthew Ahrens 0ec072487b Illumos 5169-5171 - zdb fixes
5169 zdb should limit its ARC size
5170 zdb -c should create more scrub i/os by default
5171 zdb should print status while loading metaslabs for leak detection
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Bayard Bell <Bayard.Bell@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5169
  https://www.illumos.org/issues/5170
  https://www.illumos.org/issues/5171
  https://github.com/illumos/illumos-gate/commit/06be980

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2707
2014-10-23 10:27:55 -07:00
Matthew Ahrens acf58e706c Illumos 5178 - zdb -vvvvv on old-format pool fails in dump_deadlist()
5178 zdb -vvvvv on old-format pool fails in dump_deadlist()
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Alek Pinchuk <alek.pinchuk@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/5178
  https://github.com/illumos/illumos-gate/commit/90c76c6

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2713
2014-10-23 10:18:36 -07:00
ilovezfs 023bbe6f01 Fix zpool create -t ENOENT bug.
In userland we need to switch over to the temporary name once the
pool has been created, otherwise the root dataset won't mount
and the error "cannot open 'the_real_name': dataset does not exist"
is printed.

Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2760
2014-10-23 10:00:35 -07:00
Darik Horn d94fd5f0de Let `zpool import` ignore a missing hostid record.
Change the zpool program to skip its hostid mismatch check in the
same way that libzfs already does.

Invoked imports fail if the ZPOOL_CONFIG_HOSTID nvpair is missing in
the /etc/zfs/zpool.cache file, which can happen as of the /etc/hostid
deprecation in commit zfsonlinux/spl@acf0ade362.

Signed-off-by: Darik Horn <dajhorn@vanadac.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2794
2014-10-17 14:59:05 -07:00
Ned Bass e82cdc3acc ztest: print backtrace on SIGSEGV and SIGABRT
Add signal handlers to print a backtrace if we crash or assert.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2788
2014-10-13 10:39:39 -07:00
Matthew Ahrens e022864d19 Illumos 5176 - lock contention on godfather zio
5176 lock contention on godfather zio
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Bayard Bell <Bayard.Bell@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/5176
  https://github.com/illumos/illumos-gate/commit/6f834bc

Porting notes:

Under Linux max_ncpus is defined as num_possible_cpus().  This is
largest number of cpu ids which might be available during the life
time of the system boot.  This value can be larger than the number
of present cpus if CONFIG_HOTPLUG_CPU is defined.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2711
2014-10-07 11:24:24 -07:00
Chris Dunlap 8ac9b5e6b5 Cleanup struct zed_conf vars in zed_conf_destroy
Reset struct zed_conf file descriptors to -1 after close(),
and pointers to NULL after free().

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2756
2014-10-06 13:18:11 -07:00
Chris Dunlap 56697c4264 Obtain advisory lock on ZED PID file
ZED uses an advisory lock on its state file to protect against
multiple instances running concurrently.  However, work is planned
to move this state information into the kernel, and ZED will still
need to protect against starting multiple instances.

This commit adds an advisory lock on the PID file to protect against
starting multiple instances.  A lock failure can be overridden with
the "-f" (force) command-line option.  The advisory lock on the state
file is being retained for as long as the state information is stored
in the state file.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2756
2014-10-06 13:17:40 -07:00
Richard Yao 83e9986f6e Implement -t option to zpool create for temporary pool names
Creating virtual machines that have their rootfs on ZFS on hosts that
have their rootfs on ZFS causes SPA namespace collisions when the
standard name rpool is used. The solution is either to give each guest
pool a name unique to the host, which is not always desireable, or boot
a VM environment containing an ISO image to install it, which is
cumbersome.

26b42f3f9d introduced `zpool import -t
...` to simplify situations where a host must access a guest's pool when
there is a SPA namespace conflict. We build upon that to introduce
`zpool import -t tname ...`. That allows us to create a pool whose
in-core name is tname, but whose on-disk name is the normal name
specified.

This simplifies the creation of machine images that use a rootfs on ZFS.
That benefits not only real world deployments, but also ZFSOnLinux
development by decreasing the time needed to perform rootfs on ZFS
experiments.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
2014-09-30 10:46:59 -07:00
Richard Yao 00d2a8c92f zpool import -t should not update cachefile
zpool import's -t parameter is intended for use with -R when operating
on pools that belong to other systems. Like -R, pools imported in this
way should not update the cachefile unless explicitly requested. The
initial implementation allowed the cachefile to be updated when -R was
not used. This went uncaught during testing because -R had implicitly
disabled use of the cachefile.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
2014-09-30 10:46:58 -07:00
Richard Yao 2f3ec90061 Add add_prop_list_default helper
Adding to a property list only if there is no existing value is used
twice. Once by zpool create -R and again by zpool import -R. Now that
zpool create -t and zpool import -t also need it, lets refactor it into
a helper function to make the code more readable.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
2014-09-30 10:46:58 -07:00
Chris Dunlap dcca723ace Refer to ZED's scripts as ZEDLETs
The executables invoked by the ZED in response to a given zevent
have been generically referred to as "scripts".  By convention,
these scripts have aimed to be /bin/sh compatible for reasons of
portability and comprehensibility.  However, the ZED only requires
they be executable and (ideally) capable of reading environment
variables.  As such, these scripts are now referred to as ZEDLETs
(ZFS Event Daemon Linkage for Executable Tasks).

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2735
2014-09-25 13:54:17 -07:00
Chris Dunlap 8cb8cf91df Replace zed's use of malloc with calloc
When zed allocates memory via malloc(), it typically follows that
with a memset().  However, calloc() implementations can often perform
optimizations when zeroing memory:

https://stackoverflow.com/questions/2688466/why-mallocmemset-is-slower-than-calloc

This commit replaces zed's use of malloc() with calloc().

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2736
2014-09-25 13:43:57 -07:00
Chris Dunlap bee6665b88 Fix zed io-spare.sh dash incompatibility
The zed's io-spare.sh script defines a vdev_status() function to query
the 'zpool status' output for obtaining the status of a specified vdev.
This function contains a small awk script that uses a parameter
expansion (${parameter/pattern/string}) supported in bash but not
in dash.  Under dash, this fails with a "Bad substitution" error.

This commit replaces the awk script with a (hopefully more portable)
sed script that has been tested under both bash and dash.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2536
2014-09-23 15:32:30 -07:00
George Wilson a05dfd0028 Illumos 5147 - zpool list -v should show individual disk capacity
The 'zpool list -v' command displays lots of info but excludes the
capacity of each disk. This should be added.

5147 zpool list -v should show individual disk capacity
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5147
  https://github.com/illumos/illumos-gate/commit/7a09f97

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2688
2014-09-23 10:10:42 -07:00
Chris Dunlap 5043deaa40 Remove reverse indentation from zed comments.
Remove all occurrences of reverse indentation from zed comments for
consistency within the project code base.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2695
2014-09-22 12:17:53 -07:00
Dan Swartzendruber 287be44f53 Improve handling of filesystem versions
Change mount code to diagnose filesystem versions that
are not supported by the current implementation.

Change upgrade code to do likewise and refuse to upgrade
a pool if any filesystems on it are a version which is
not supported by the current implementation.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dan Swartzendruber <dswartz@druber.com>
Closes: #2616
2014-09-03 09:17:14 -07:00
louwrentius bcd9624d0f Change delimiter for ZED email scripts
When the ZED_EMAIL_INTERVAL_SECS="3600" option is set in zed.rc
configuration file then notification emails should be rate limited.

Rate limiting is accomplished by maintaining a colon delimited state
file which includes the device name.  Unfortunately there are valid
device names which include a colon and therefore prevent the rate
limiting for working properly.  For this reason the delimiter has
been changed to a semi-colon.

Signed-off-by: louwrentius <louwrentius@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Closes #2645
2014-09-02 14:18:54 -07:00
Chris Dunlap 8125fb7190 Cleanup zed logging
This is a set of minor cleanup changes related to zed logging:
- Remove the program identity prefix from messages written to stderr
  since systemd already prepends this output with the program name.
- Replace the copy of the program identity string with a ptr reference.
- Replace "pid" with "PID" for consistency in comments & strings.
- Rename the zed_log.c struct _ctx component "level" to "priority".
- Add the LOG_PID option for messages written to syslog.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2252
2014-09-02 14:18:53 -07:00
Chris Dunlap 5a8855b716 Fix race condition with zed pidfile creation
When the zed is started as a forking daemon (by default),
a race-condition exists where the parent process can terminate before
the pidfile has been created by the grandchild process.  When invoked
as a Type=forking systemd service, this can result in the following:

  systemd[1]: Starting ZFS Event Daemon (zed)...
  systemd[1]: PID file /var/run/zed.pid not readable (yet?) after start.

This commit adds a daemonize pipe to allow the grandchild process to
signal the parent process that initialization is complete (and the
pidfile has been created).  The parent process will wait for this
notification before exiting.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2252
2014-09-02 14:18:53 -07:00
Matthew Ahrens dea377c0d9 Illumos 4970-4974 - extreme rewind enhancements
4970 need controls on i/o issued by zpool import -XF
4971 zpool import -T should accept hex values
4972 zpool import -T implies extreme rewind, and thus a scrub
4973 spa_load_retry retries the same txg
4974 spa_load_verify() reads all data twice
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/4970
  https://www.illumos.org/issues/4971
  https://www.illumos.org/issues/4972
  https://www.illumos.org/issues/4973
  https://www.illumos.org/issues/4974
  https://github.com/illumos/illumos-gate/commit/e42d205

Notes:
    This set of patches adds a set of tunable parameters for the
    "extreme rewind" mode of pool import which allows control over
    the traversal performed during such an import.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2598
2014-08-26 16:29:57 -07:00
Richard Yao 2fe5011008 Drive database update
The Intel DC S3500 and Intel DC S3700 are optimized to handle 4KB
sectors well despite of their 8KB page sizes, so we move them to a new
category for enterprise drives where they will receive ashift=12. They
are joined by the Intel 730 series, which uses the same disk controller,
as well as a San Disk enterprise drive. The drive IDs for these two were
obtained by myself with the drive_id utility. The drive ID for the 240GB
Intel 730 model was extrapolated from the drive ID for the 480GB model.

Lastly, we also add some Western Digital mobile drives.  ryuo in
\#zfsonlinux on freenode obtained "ATA     WDC WD2500BEVT-0" from
running drive_id on his own hardware. The additional drives in that
family were extrapolated from that identifer.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2601
2014-08-18 10:09:03 -07:00
George Wilson f3a7f6610f Illumos 4976-4984 - metaslab improvements
4976 zfs should only avoid writing to a failing non-redundant top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature is enabled
4983 need to collect metaslab information via mdb
4984 device selection should use fragmentation metric
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4976
  https://www.illumos.org/issues/4978
  https://www.illumos.org/issues/4979
  https://www.illumos.org/issues/4980
  https://www.illumos.org/issues/4981
  https://www.illumos.org/issues/4982
  https://www.illumos.org/issues/4983
  https://www.illumos.org/issues/4984
  https://github.com/illumos/illumos-gate/commit/2e4c998

Notes:
    The "zdb -M" option has been re-tasked to display the new metaslab
    fragmentation metric and the new "zdb -I" option is used to control
    the maximum number of in-flight I/Os.

    The new fragmentation metric is derived from the space map histogram
    which has been rolled up to the vdev and pool level and is presented
    to the user via "zpool list".

    Add a number of module parameters related to the new metaslab weighting
    logic.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2595
2014-08-18 08:40:49 -07:00
Turbo Fredriksson f67d709080 Create an 'overlay' property
Add a new 'overlay' property (default 'off') that controls whether the
filesystem should be mounted even if the mountpoint is busy or if it
should fail with a 'mountpoint not empty'.

Doing overlay mounts is the default mount behavior on Linux, but not
in ZFS. It have been decided that following the ZFS behavior should
be the default, but this overlay allows for site administrator to
override this decision on a per-dataset basis.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2503
2014-08-15 13:39:19 -07:00
Matthew Ahrens 5dbd68a352 Illumos 4914 - zfs on-disk bookmark structure should be named *_phys_t
4914 zfs on-disk bookmark structure should be named *_phys_t

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/4914
  https://github.com/illumos/illumos-gate/commit/7802d7b

Porting notes:

There were a number of zfsonlinux-specific uses of zbookmark_t which
needed to be updated.  This should reduce the likelihood of further
problems like issue #2094 from occurring.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2558
2014-08-06 14:48:41 -07:00
Matthew Ahrens 9b67f60560 Illumos 4757, 4913
4757 ZFS embedded-data block pointers ("zero block compression")
4913 zfs release should not be subject to space checks

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4757
  https://www.illumos.org/issues/4913
  https://github.com/illumos/illumos-gate/commit/5d7b4d4

Porting notes:

For compatibility with the fastpath code the zio_done() function
needed to be updated.  Because embedded-data block pointers do
not require DVAs to be allocated the associated vdevs will not
be marked and therefore should not be unmarked.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2544
2014-08-01 14:28:05 -07:00
Tim Chase 603cb25ca5 zed needs libzfs_core
As of a recent group of Illumos/Delphix updates, zed needs libzfs_core
in order to resolve lzc_get_bookmarks() and likely other functions
going forward.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2534
2014-07-31 09:49:01 -07:00
Matthew Ahrens 9bd274ddd8 Illumos #4374
4374 dn_free_ranges should use range_tree_t

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4374
  https://github.com/illumos/illumos-gate/commit/bf16b11

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2531
2014-07-30 09:20:35 -07:00
Matthew Ahrens da536844d5 Illumos 4368, 4369.
4369 implement zfs bookmarks
4368 zfs send filesystems from readonly pools
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4369
  https://www.illumos.org/issues/4368
  https://github.com/illumos/illumos-gate/commit/78f1710

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2530
2014-07-29 10:55:29 -07:00
Max Grossman b0bc7a84d9 Illumos 4370, 4371
4370 avoid transmitting holes during zfs send
4371 DMU code clean up

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Garrett D'Amore <garrett@damore.org>a

References:
  https://www.illumos.org/issues/4370
  https://www.illumos.org/issues/4371
  https://github.com/illumos/illumos-gate/commit/43466aa

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2529
2014-07-28 14:29:58 -07:00
Matthew Ahrens fa86b5dbb6 Illumos 4171, 4172
4171 clean up spa_feature_*() interfaces
4172 implement extensible_dataset feature for use by other zpool features

Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Approved by: Garrett D'Amore <garrett@damore.org>a

References:
  https://www.illumos.org/issues/4171
  https://www.illumos.org/issues/4172
  https://github.com/illumos/illumos-gate/commit/2acef22

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2528
2014-07-25 16:40:07 -07:00
Turbo Fredriksson 79eb71dc6c Support '-H' (scripted mode) to 'zpool get'
This functionality is already available in 'zfs get'.  Providing
it for 'zpool get' is useful and good for consistency.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2522
2014-07-25 11:58:36 -07:00
George Wilson 080b310015 Illumos #4756 Fix metaslab_group_preload deadlock
4756 metaslab_group_preload() could deadlock
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

The metaslab_group_preload() function grabs the mg_lock and then later
tries to grab the metaslab lock. This lock ordering may lead to a
deadlock since other consumers of the mg_lock will grab the metaslab
lock first.

References:
  https://www.illumos.org/issues/4756
  https://github.com/illumos/illumos-gate/commit/30beaff

Ported-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2488
2014-07-22 09:41:32 -07:00
George Wilson 93cf20764a Illumos #4101, #4102, #4103, #4105, #4106
4101 metaslab_debug should allow for fine-grained control
4102 space_maps should store more information about themselves
4103 space map object blocksize should be increased
4105 removing a mirrored log device results in a leaked object
4106 asynchronously load metaslab
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <seb@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

Prior to this patch, space_maps were preferred solely based on the
amount of free space left in each. Unfortunately, this heuristic didn't
contain any information about the make-up of that free space, which
meant we could keep preferring and loading a highly fragmented space map
that wouldn't actually have enough contiguous space to satisfy the
allocation; then unloading that space_map and repeating the process.

This change modifies the space_map's to store additional information
about the contiguous space in the space_map, so that we can use this
information to make a better decision about which space_map to load.
This requires reallocating all space_map objects to increase their
bonus buffer size sizes enough to fit the new metadata.

The above feature can be enabled via a new feature flag introduced by
this change: com.delphix:spacemap_histogram

In addition to the above, this patch allows the space_map block size to
be increase. Currently the block size is set to be 4K in size, which has
certain implications including the following:

    * 4K sector devices will not see any compression benefit
    * large space_maps require more metadata on-disk
    * large space_maps require more time to load (typically random reads)

Now the space_map block size can adjust as needed up to the maximum size
set via the space_map_max_blksz variable.

A bug was fixed which resulted in potentially leaking an object when
removing a mirrored log device. The previous logic for vdev_remove() did
not deal with removing top-level vdevs that are interior vdevs (i.e.
mirror) correctly. The problem would occur when removing a mirrored log
device, and result in the DTL space map object being leaked; because
top-level vdevs don't have DTL space map objects associated with them.

References:
  https://www.illumos.org/issues/4101
  https://www.illumos.org/issues/4102
  https://www.illumos.org/issues/4103
  https://www.illumos.org/issues/4105
  https://www.illumos.org/issues/4106
  https://github.com/illumos/illumos-gate/commit/0713e23

Porting notes:

A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also,
the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary.

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2488
2014-07-22 09:39:16 -07:00
Richard Yao a5778ea242 zdb: Introduce -V for verbatim import
When given a pool name via -e, zdb would attempt an import. If it
failed, then it would attempt a verbatim import. This behavior is
not always desirable so a -V switch is added to zdb to control the
behavior. When specified, a verbatim import is done. Otherwise,
the behavior is as it was previously, except no verbatim import
is done on failure.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2372
2014-07-17 11:40:32 -07:00
George Wilson 2fbc542ebd Illumos 4168, 4169, 4170: ztest, zdb and zhack fixes
4168 ztest assertion failure in dbuf_undirty
4169 verbatim import causes zdb to segfault
4170 zhack leaves pool in ACTIVE state
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>

References:
    https://www.illumos.org/issues/4168
    https://www.illumos.org/issues/4169
    https://www.illumos.org/issues/4170
    https://github.com/illumos/illumos-gate/commit/7fdd916

Porting notes:

Of particular interest when troubleshooting corrupted pools, the
commonly-used "zdb -e" operation may perform verbatim imports and
furthermore, it will soon have direct support for verbatim imports via
a new "-V" option.  The 4169 fix eliminates a common segfault case in
which spa_history_log_version() tries to access an un-opened dsl_pool_t.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2451
Closes #2283
Closes #2467
2014-07-17 11:37:57 -07:00
Matthew Ahrens d586964141 Illumos #3641 compressed block histograms with zdb
This patch is a zdb extension of the '-b' option, producing a histogram
of the physical compressed block sizes per DMU object type on disk. The
'-bbbb' option to zdb will uncover this new feature; here's an example
usage on a new pool and snippet of the output it generates:

    # zpool create tank /dev/vd{b,c,d}
    # dd bs=1k  if=/dev/urandom of=/tank/1kfile  count=1
    # dd bs=3k  if=/dev/urandom of=/tank/3kfile  count=1
    # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1
    # zdb -bbbb tank
    ...
         3  68.0K   68.0K   68.0K   22.7K    1.00    34.26  ZFS plain file
    psize (in 512-byte sectors): number of blocks
                              2:      1 *
                              3:      0
                              4:      0
                              5:      0
                              6:      1 *
                              7:      0
    ...
                            127:      0
                            128:      1 *
    ...

The blocks are also broken down by their indirection level. Expanding on
the above example:

    # zfs set recordsize=1k tank
    # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2
    # zdb -bbbb tank
    ...
         1    16K      1K      2K      2K   16.00     1.02      L1 ZFS plain file
    psize (in 512-byte sectors): number of blocks
                              2:      1 *
         5  70.0K   70.0K   70.0K   14.0K    1.00    35.71      L0 ZFS plain file
    psize (in 512-byte sectors): number of blocks
                              2:      3 ***
                              3:      0
                              4:      0
                              5:      0
                              6:      1 *
                              7:      0
    ...
                            127:      0
                            128:      1 *
         6  86.0K   71.0K   72.0K   12.0K    1.21    36.73  ZFS plain file
    psize (in 512-byte sectors): number of blocks
                              2:      4 ****
                              3:      0
                              4:      0
                              5:      0
                              6:      1 *
                              7:      0
    ...
                            127:      0
                            128:      1 *
    ...

There's now a single 1K L1 block which is the indirect block needed for
the '2x1kfile' file just created, as well as two more 1K L0 blocks from
the same file.

This can be used to get a distribution of the block sizes used within
the pool, on a per object type basis.

References:
  https://illumos.org/issues/3641
  https://github.com/illumos/illumos-gate/commit/490d05b

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@me.com>
Closes #2456
2014-07-16 11:52:46 -07:00
Turbo Fredriksson 628668a39f Add information about the -o option to zpool replace
Users need to be aware that when replacing devices in an existing
pool they may need to override automatically detected ashift value.
This will all depend on the exact hardware they are using.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2024
2014-06-27 08:31:07 -07:00
Turbo Fredriksson 480f62655d Only automatically mount a clone when 'canmount == on'.
According to the man page, "When the noauto option is set, a dataset
can only be mounted and unmounted explicitly. The dataset is not
mounted automatically when the dataset is created or imported ...."

When cloning a dataset the canmount property was not being honored.
This patch adds the required check to achieve the behavior described
in the man page.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2241
2014-06-06 12:30:35 -07:00
Richard Yao 2024041b6c Remove superfluous statement
Clang's static analyzer reported that the value assigned to pcksum is
never used. That is because we initialize both zc and pcksum to {{ 0 }}
and then do `pcksum = zc;`. That is fairly pointless. However, it has
the effect of generating a false positive in Clang's static analyzer.
Since noise from false positives can obscure real issues, we fix it
anyway.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2330
2014-05-30 17:02:37 -07:00
John Albietz 5f3c101b8f Added INTEL SSD 530 Series
INTEL SSD 530 Series... SSDSC2BW24

Signed-off-by: John Albietz <inthecloud247@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2184
2014-05-19 16:57:14 -07:00
Richard Yao 1cbae971c5 Handle ZPOOL_STATUS_HOSTID_MISMATCH in zpool status
Verbatim imports can cause hostid mismatches, but things otherwise work. `zpool
status` does not handle this and will fail when assertions are enabled:

```
zpool: ../../cmd/zpool/zpool_main.c:4418: status_callback: Assertion `reason == ZPOOL_STATUS_OK' failed.

Program received signal SIGABRT, Aborted.
```

Lets instead add a case to display an informative message such as this:

```
  pool: rpool
 state: ONLINE
status: Mismatch between pool hostid and system hostid on imported pool.
        This pool was previously imported into a system with a different hostid,
        and then was verbatim imported into this system.
action: Export this pool on all systems on which it is imported.
        Then import it to correct the mismatch.
   see: http://zfsonlinux.org/msg/ZFS-8000-EY
  scan: scrub repaired 0 in 0h8m with 0 errors on Thu Apr 17 19:43:57 2014
config:

        NAME        STATE     READ WRITE CKSUM
        rpool       ONLINE       0     0     0
          sda       ONLINE       0     0     0

errors: No known data errors
```

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2342
2014-05-19 10:16:29 -07:00
Tim Chase 962d524212 Check the dataset type more rigorously when fetching properties.
When fetching property values of snapshots, a check against the head
dataset type must be performed.  Previously, this additional check was
performed only when fetching "version", "normalize", "utf8only" or "case".

This caused the ZPL properties "acltype", "exec", "devices", "nbmand",
"setuid" and "xattr" to be erroneously displayed with meaningless values
for snapshots of volumes.  It also did not allow for the display of
"volsize" of a snapshot of a volume.

This patch adds the headcheck flag paramater to zfs_prop_valid_for_type()
and zprop_valid_for_type() to indicate the check is being done
against a head dataset's type in order that properties valid only for
snapshots are handled correctly.  This allows the the head check in
get_numeric_property() to be performed when fetching a property for
a snapshot.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2265
2014-05-06 10:41:46 -07:00
Richard Yao 7809eb8b65 ztest: Switch to LWP rwlock interface
ztest is intended to subject the ZFS code in userland to stress that it
should be able to withstand. Any failures that occur when running it are
failures that likely would occur inside the kernel. However, being in
userland, it is much easier to debug them. In practice, this prevents
a large number of problems from reaching production code.

A design decision was made by the original authors of ztest to make a
distinction between userland locking primitives and kernel locking
primitives. The ztest code itself calls userland locking primitives
while the kernel code being run in userland will call emulated kernel
locking primitives that wrap the userland locking primitives.

When ztest was first ported to Linux, a decision was made to use the
emulated kernel interfaces everywhere. In effect, the userland
rw_rdlock()/rw_wrlock() became the kernel rw_enter() and and the userland
rw_unlock() became the kernel rw_exit(). This caused a regression
because of an assertion in rw_enter() to catch recursive locking. That
is permitted in userland, but not in the kernel. Consequently, the ztest
code itself does recursive read locking. The use of the emulated kernel
interfaces consequently caused the following failure:

ztest: ../../lib/libzpool/kernel.c:384: Assertion `rwlp->rw_owner !=
zk_thread_current() (0x1c87150 != 0x1c87150)' failed.

That occurs because ztest_dmu_objset_create_destroy() will take a read
lock and call ztest_dmu_object_alloc_free(). That will call ztest_io(),
which will take a readlock only when asked to do ZTEST_IO_REWRITE. This
triggered the assertion.

The pthreads rwlock interface was based on the LWP rwlock interface
implemented in Illumos libc. Luckily enough, the subset used by ztest is
almost identical, so we can solve this problem by switching to the LWP
thread rwlock interface in ztest. This eliminates a point of divergence
with Illumos and should make code sharing slightly easier.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1970
2014-05-01 15:53:58 -07:00
Richard Yao c6e924fea8 Fix libblkid ZFS detection when making new pools
zfsonlinux/zfs@1db7b9be75 should have
fixed this, but this particular string was overlooked.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2288
2014-05-01 13:26:33 -07:00
Chris Dunlap 6ac770b196 Replace zed_file_create_dirs() with mkdirp()
When processing directory components starting from the root dir,
zed_file_create_dirs() contained a bug in checking the return value of
mkdir().  A typo was made, and the test for (mkdir_errno != EEXIST) was
erroneously written as (mkdir_errno == EEXIST).  If some of the leading
directory components already existed, this bug would cause the routine
to exit before creating the remaining directory components.

Instead of fixing the above mkdir_errno test, this commit replaces
zed_file_create_dirs() with mkdirp().  This cleanup was already
planned, and zed_file_create_dirs() only existed because I didn't
realize mkdirp() was already in tree at the time.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2248
2014-04-09 13:32:54 -07:00
John M. Layman cbca6076b3 Fix for re-reading /etc/mtab.
This is a continuation of fb5c53ea65b75c67c23f90ebbbb1134a5bb6c140:

    When /etc/mtab is updated on Linux it's done atomically with
    rename(2).  A new mtab is written, the existing mtab is unlinked,
    and the new mtab is renamed to /etc/mtab.  This means that we
    must close the old file and open the new file to get the updated
    contents.  Using rewind(3) will just move the file pointer back
    to the start of the file, freopen(3) will close and open the file.

In this commit, a few more rewind(3) calls were replaced with freopen(3)
to allow updated mtab entries to be picked up immediately.

Signed-off-by: John M. Layman <jml@frijid.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2215
Issue #1611
2014-04-04 09:46:20 -07:00
Chris Dunlap 518eba1492 Replace check for _POSIX_MEMLOCK w/ HAVE_MLOCKALL
zed supports a '-M' cmdline opt to lock all pages in memory via
mlockall().  The _POSIX_MEMLOCK define is checked to determine whether
this function is supported.  The current test assumes mlockall()
is supported if _POSIX_MEMLOCK is non-zero.  However, this test is
insufficient according to mlock(2) and sysconf(3).  If _POSIX_MEMLOCK
is -1, mlockall() is not supported; but if _POSIX_MEMLOCK is 0,
availability must be checked at runtime.

This commit adds an autoconf check for mlockall() to user.m4.  The zed
code block for mlockall() is now guarded with a test for HAVE_MLOCKALL.
If defined, mlockall() will be called and its runtime availability
checked via its return value.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
2014-04-02 13:10:08 -07:00
Brian Behlendorf 904ea2763e Add automatic hot spare functionality
When a vdev starts getting I/O or checksum errors it is now
possible to automatically rebuild to a hot spare device.

To cleanly support this functionality in a shell script some
additional information was added to all zevent ereports which
include a vdev.  This covers both io and checksum zevents but
may be used but other scripts.

In the Illumos FMA solution the same information is required
but it is retrieved through the libzfs library interface.
Specifically the following members were added:

  vdev_spare_paths  - List of vdev paths for all hot spares.
  vdev_spare_guids  - List of vdev guids for all hot spares.
  vdev_read_errors  - Read errors for the problematic vdev
  vdev_write_errors - Write errors for the problematic vdev
  vdev_cksum_errors - Checksum errors for the problematic vdev.

By default the required hot spare scripts are installed but this
functionality is disabled.  To enable hot sparing uncomment the
ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the
/etc/zfs/zed.d/zed.rc configuration file.

These scripts do no add support for the autoexpand property. At
a minimum this requires adding a new udev rule to detect when
a new device is added to the system.  It also requires that the
autoexpand policy be ported from Illumos, see:

  https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c

Support for detecting the correct name of a vdev when it's not
a whole disk was added by Turbo Fredriksson.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #2
2014-04-02 13:10:08 -07:00
Brian Behlendorf d21705eab9 Add missing DATA_TYPE_STRING_ARRAY output
This functionality has always been missing.  But until now there
were no zevents which included an array of strings so it wasn't
missed.  However, that's now changed so to ensure this information
is output correctly by 'zpool events -v' the DATA_TYPE_STRING_ARRAY
has been implemented.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
2014-04-02 13:10:08 -07:00
Brian Behlendorf 1a5c611a22 Make command line guid parsing more tolerant
Several of the zfs utilities allow you to pass a vdev's guid rather
than the device name.  However, the utilities are not consistent in
how they parse that guid.  For example, 'zinject' expects the guid
to be passed as a hex value while 'zpool replace' wants it as a
decimal.  The user is forced to just know what format to use.

This patch improve things by making the parsing more tolerant.
When strtol(3) is called using 0 for the base, rather than say
10 or 16, it will then accept hex, decimal, or octal input based
on the prefix.  From the man page.

    If base is zero or 16, the string may then include a "0x"
    prefix, and  the number  will  be read in base 16; otherwise,
    a zero base is taken as 10 (decimal) unless the next character
    is '0', in which case it  is  taken as 8 (octal).

NOTE: There may be additional conversions not caught be this patch.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
2014-04-02 13:10:08 -07:00
Chris Dunlap 9e246ac3d8 Initial implementation of zed (ZFS Event Daemon)
zed monitors ZFS events.  When a zevent is posted, zed will run any
scripts that have been enabled for the corresponding zevent class.
Multiple scripts may be invoked for a given zevent.  The zevent
nvpairs are passed to the scripts as environment variables.

Events are processed synchronously by the single thread, and there is
no maximum timeout for script execution.  Consequently, a misbehaving
script can delay (or forever block) the processing of subsequent
zevents.  Plans are to address this in future commits.

Initial scripts have been developed to log events to syslog
and send email in response to checksum/data/io errors and
resilver.finish/scrub.finish events.  By default, email will only
be sent if the ZED_EMAIL variable is configured in zed.rc (which is
serving as a config file of sorts until a proper configuration file
is implemented).

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
2014-04-02 13:10:03 -07:00
Chris Dunlap 8c7aa0cfc4 Replace zpool_events_next() "block" parm w/ "flags"
zpool_events_next() can be called in blocking mode by specifying a
non-zero value for the "block" parameter.  However, the design of
the ZFS Event Daemon (zed) requires additional functionality from
zpool_events_next().  Instead of adding additional arguments to the
function, it makes more sense to use flags that can be bitwise-or'd
together.

This commit replaces the zpool_events_next() int "block" parameter with
an unsigned bitwise "flags" parameter.  It also defines ZEVENT_NONE
to specify the default behavior.  Since non-blocking mode can be
specified with the existing ZEVENT_NONBLOCK flag, the default behavior
becomes blocking mode.  This, in effect, inverts the previous use
of the "block" parameter.  Existing callers of zpool_events_next()
have been modified to check for the ZEVENT_NONBLOCK flag.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
2014-03-31 16:11:21 -07:00
Brian Behlendorf 9b101a7320 Clarify zpool_events_next() comment
Due to the very poorly chosen argument name 'cleanup_fd' it was
completely unclear that this file descriptor is used to track the
current cursor location.  When the file descriptor is created by
opening ZFS_DEV a private cursor is created in the kernel for the
returned file descriptor.  Subsequent calls to zpool_events_next()
and zpool_events_seek() then require the file descriptor as an
argument to reposition the cursor.  When the file descriptor is
closed the kernel state tracking the cursor is destroyed.

This patch contains no functional change, it just changes a
few variable names and clarifies the documentation.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
2014-03-31 16:11:08 -07:00
Yuri Pankov d3773fda14 Illumos #3120 zinject hangs in zfsdev_ioctl() due to uninitialized zc
3120 zinject hangs in zfsdev_ioctl() due to uninitialized zc

Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3120
  illumos/illumos-gate@f4c46b1eda

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2152
2014-03-24 11:06:11 -07:00
Richard Yao 26b42f3f9d Implement -t option to zpool import for temporary pool names
Originally, users had to handle spa namespace collisions by either
exporting the already imported pool or by specifying a new name for the
pool with a conflicting name. In the case of root pools from virtual
guests, neither approach to collision resolution is reasonable. This is
addressed by extending the new name syntax with a -t option to specify
that the new name is temporary. When specified, this sets an internal
flag that is passed into the kernel to tell it that all label updates
should refer to the name used in the original label. Consequently, the
original pool name will be retained on export.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2189
2014-03-20 12:05:30 -07:00
Isaac Huang 312f82ce65 sighandler() should take 2 arguments
Stopping arcstat.py with ^C always ends up with error:
TypeError: sighandler() takes no arguments (2 given)

Since no special signal handling was done in sighandler(),
it's simpler to just set SIGINT handler to SIG_DFL, which
terminates the script.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes #2179
2014-03-20 11:03:46 -07:00
Brian Behlendorf d9119bd66d Revert "sighandler() should take 2 arguments"
This reverts commit 0bb89b6c59 in
favor of a cleaner implementation.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2182
2014-03-20 11:03:21 -07:00
Richard Yao e2282ef57e Remove unused option -r from 'zpool import'
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2178
2014-03-12 09:09:52 -07:00
Richard Yao 2026196230 Switch ztest mmap(2) ASSERTs to VERIFYs
This is just a small bit of cleanup to ensure ztest fails early
on systems where mmap(2) is not functioning.  For the automated
testing which is the primary consumer of ztest there is no
functional change because debugging is always enabled.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2177
2014-03-12 09:05:00 -07:00
Richard Yao 85802aa42b Free props in ztest_init()
Valgrind complained about this and it's absolutely right.  The
props nvlist was not being freed in ztest_init.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #2174
2014-03-12 09:01:48 -07:00
Isaac Huang 0bb89b6c59 sighandler() should take 2 arguments
Stopping arcstat.py with ^C always ends up with error:

  TypeError: sighandler() takes no arguments (2 given)

This patch corrects the error by updating the signal handler
to take the correct number of arguments.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2182
2014-03-12 09:00:18 -07:00
Isaac Huang 4e1c9f9c48 Make arcstat.py default to one header per screen
Today arcstat.py prints one header every hdr_intr (20 by default)
lines. It would be more consistent with out utilities like vmstat
if hdr_intr defaulted to terminal window size, i.e.  one header
per screenful of outputs.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2183
2014-03-12 08:56:12 -07:00
cburroughs e78b6da3d0 Include l2asize in arcstat
For consistency with upstream pull in the l2asize update after
reworking it from Perl to Python.

References:
  https://github.com/mharsch/arcstat/pull/11
  https://github.com/mharsch/arcstat/pull/12

Signed-off-by: cburroughs <chris.burroughs@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2122
2014-03-04 11:25:58 -08:00
Richard Yao 4f2dcb3eee Add erratum for issue #2094
ZoL commit 1421c89 unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit.  Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.

The additional field has been removed by the previous commit.  However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied.  This will return the pools to a state in which they
may be imported by other implementations.

The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted.  A message similar to one of the following means your
pool must be scrubbed to restore compatibility.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #1 detected.
 action: The pool can be imported using its name or numeric identifier,
         however there is a compatibility issue which should be corrected
         by running 'zpool scrub'
    see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

$ zpool status
  pool: zol-0.6.2-173
 state: ONLINE
  scan: pool compatibility issue detected.
   see: https://github.com/zfsonlinux/zfs/issues/2094
action: To correct the issue run 'zpool scrub'.
config:
...

If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported.  Further advice on how to proceed will be
provided by the error message as follows.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #2 detected.
 action: The pool can not be imported with this version of ZFS due to an
         active asynchronous destroy.  Revert to an earlier version and
         allow the destroy to complete before updating.
         see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:

zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w

Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.

The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys.  Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.

This patch does have one limitation that should be mentioned.  It will not
detect errata #2 on a pool unless errata #1 is also present.  It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.

End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL.  The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root.  This will display a non-zero
value for any pool with an active asynchronous destroy.

Lastly, it is expected that no user data has been lost as a result of
this erratum.

Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
2014-02-21 12:10:40 -08:00
Brian Behlendorf ffe9d38275 Add generic errata infrastructure
From time to time it may be necessary to inform the pool administrator
about an errata which impacts their pool.  These errata will by shown
to the administrator through the 'zpool status' and 'zpool import'
output as appropriate.  The errata must clearly describe the issue
detected, how the pool is impacted, and what action should be taken
to resolve the situation.  Additional information for each errata will
be provided at http://zfsonlinux.org/msg/ZFS-8000-ER.

To accomplish the above this patch adds the required infrastructure to
allow the kernel modules to notify the utilities that an errata has
been detected.  This is done through the ZPOOL_CONFIG_ERRATA uint64_t
which has been added to the pool configuration nvlist.

To add a new errata the following changes must be made:

* A new errata identifier must be assigned by adding a new enum value
  to the zpool_errata_t type.  New enums must be added to the end to
  preserve the existing ordering.

* Code must be added to detect the issue.  This does not strictly
  need to be done at pool import time but doing so will make the
  errata visible in 'zpool import' as well as 'zpool status'.  Once
  detected the spa->spa_errata member should be set to the new enum.

* If possible code should be added to clear the spa->spa_errata member
  once the errata has been resolved.

* The show_import() and status_callback() functions must be updated
  to include an informational message describing the errata.  This
  should include an action message describing what an administrator
  should do to address the errata.

* The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be
  updated to describe the errata.  This space can be used to provide
  as much additional information as needed to fully describe the errata.
  A link to this documentation will be automatically generated in the
  output of 'zpool import' and 'zpool status'.

Original-idea-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
2014-02-21 12:10:40 -08:00
Brian Behlendorf 731782ec31 Use expected zpool_status_t type
Both the zpool_import_status() and zpool_get_status() functions
return the zpool_status_t enum.  This explicit type should be used
rather than the more generic int type.

This patch makes no functional change and should only be considered
code cleanup.  It happens to have been done in the context of #2094
because that's when I noticed this issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
2014-02-21 12:10:40 -08:00
Patrik Greco 2278381ce2 Fix error message in zpios
The chunksize must always be strictly smaller than the regionsize.

Signed-off-by: Andrew Uselton <andrew.c.uselton@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2072
2014-01-29 15:11:56 -08:00
Ned Bass 09d0b30fd1 vdev_id: support per-channel slot mappings
The vdev_id udev helper currently applies slot renumbering rules to
every channel (JBOD) in the system.  This is too inflexible for systems
with non-homogeneous storage topologies.  The "slot" keyword now takes
an optional third parameter which names a channel to which the mapping
will apply.  If the third parameter is omitted then the rule applies to
all channels.  The first-specified rule that can match a slot takes
precedence.  Therefore a channel-specific rule for a given slot should
generally appear before a generic rule for the same slot number.  In
this way a custom slot mapping can be applied to a particular channel
and a default mapping applied to the rest.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2056
2014-01-17 11:17:54 -08:00
Richard Yao cbe8e6198c Properly link zpool command to libblkid
31fc19399e incorrectly removed $(LIBBLKID)
from cmd/zpool/Makefile.am. This meant that the toolchain was not given
-lblkid, which resulted in the following build failure on Ubuntu 13.10:

/usr/bin/ld: zpool_vdev.o: undefined reference to symbol
'blkid_put_cache@@BLKID_1.0'
/lib/x86_64-linux-gnu/libblkid.so.1: error adding symbols: DSO missing
from command line
collect2: error: ld returned 1 exit status

That commit reworked various Makefile.am to follow best practices, so we
reintroduce $(LIBBLKID) in a manner consistent with that, rather than
explicitly reverting the change.

Reproduction of this issue was done on a Gentoo Linux system by
executing the following commands:

zfs create -o mountpoint=/mnt/ubuntu-13.10 rpool/ROOT/ubuntu-13.10
debootstrap --variant=buildd --arch amd64 saucy /mnt/ubuntu-13.10 http://archive.ubuntu.com/ubuntu/
mount -o bind /dev /mnt/ubuntu-13.10/dev/
mount -o bind /proc/ /mnt/ubuntu-13.10/proc/
mount -o bind /sys/ /mnt/ubuntu-13.10/sys/
cp /etc/resolv.conf /mnt/ubuntu-13.10/etc/
(cd /mnt/ubuntu-13.10/root/ && git clone git://github.com/zfsonlinux/zfs.git)
chroot /mnt/ubuntu-13.10/
apt-get install git autoconf libtool zlib1g-dev uuid-dev libblkid-dev
\#apt-get install alien fakeroot vim
cd /root/zfs
./autogen.sh
./configure --with-config=user --prefix=/usr
make

That will create a Ubuntu 13.10 chroot, fetch the sources and build
test. At this point, cmd/zpool/Makefile.am was modified and the
following commands were run to verify that the build issue was resolved:

git clean -xdf
./autogen.sh
./configure --with-config=user --prefix=/usr
make

Although it is not shown here, the absence of libblkid-dev enables ZFS
to build successfully without the patch. This could explain how this
escaped detection until recently. A test without libblkid-dev was done
to verify that the patch did not cause a regression in the absence of
libblkid:

apt-get remove libblkid-dev
git clean -xdf
./autogen.sh
./configure --with-config=user --prefix=/usr
make

Additionally, the commands themselves were tested against my live system
from within the chroot to ensure basic functionality. My live system had
corresponding kernel modules already installed and basic commands such
as `zpool list` and `zfs list` worked without incident. Lastly, this
patch was also build tested on Gentoo Linux, where it caused no
problems.

At time of writing, these steps can be used to reproduce these results
on any modern Linux system that has debootstrap installed. On Gentoo,
installing debootstrap can be done with `emerge dev-util/debootstrap`.
The current ZFSOnLinux HEAD revision as of writing is
fd23720ae1.  Once this is fixed in HEAD,
either that revision or another before this fix and after
31fc19399e will be needed to reproduce
this issue.

Lastly, it remains to be seen why the toolchains on the systems
performing regression tests did not catch this. This is not a
ZFS-specific issue, but it is something that we will want to explore in
the future.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2038
2014-01-14 10:27:17 -08:00
Brian Behlendorf e07306687d Enable /etc/mtab cache to improve performance
Re-enable the /etc/mtab cache to prevent the zfs command from
having to repeatedly open and read from the /etc/mtab file.
Instead an AVL tree of the mounted filesystems is created and
used to vastly speed up lookups. This means that if non-zfs
filesystems are mounted concurrently the 'zfs mount' will not
immediately detect them.  In practice that will rarely happen
and even if it does the absolute worst case would be a failed
mount.  This was originally disabled out of an abundance of
paranoia.

NOTE: There may still be some parts of the code which do not
consult the mtab cache.  They should be updated to check the
mtab cache as they as discovered to be a problem.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #845
2014-01-07 09:48:09 -08:00
Tim Chase fb8e608d9d Fix the creation of ZPOOL_HIST_CMD pool history entries.
Move the libzfs_fini() after the zpool_log_history() call so the
ZPOOL_HIST_CMD entry can get written.

Fix the handling of saved_poolname in zfsdev_ioctl()
which was broken as part of the stack-reduction work in
a168788053.

Since ZoL destroys the TSD data in which the previously successful
ioctl()'s pool name is stored following every vop, the ZFS_IOC_LOG_HISTORY
ioctl has a very important restriction: it can only successfully write
a long entry following a successful ioctl() if no intervening vops have
been performed.  Some of zfs subcommands do perform intervening vops and
to do the logging themselves. At the moment, the "create" and "clone"
subcommands have been modified appropriately.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1998
2014-01-07 09:00:26 -08:00
Matthew Thode 11b9ec23b9 Add full SELinux support
Four new dataset properties have been added to support SELinux.  They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8).  When one of
these properties is set to something other than 'none'.  That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.

For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:

  $ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media

This will ensure the filesystem is automatically mounted with that
rootcontext.  It is equivalent to manually specifying the rootcontext
with the -o option like this:

  $ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media

By default all four contexts are set to 'none'.  Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #1504
2013-12-19 10:37:31 -08:00
Michael Kjorling d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1821
2013-12-18 16:46:35 -08:00
John Wren Kennedy 2820bc49c5 Illumos #4208
4208 Typo in zfs_main.c: "posxiuser"

Reviewed by: Sonu Pillai <sonu.pillai@delphix.com>
Reviewed by: Will Guyette <will.guyette@delphix.com>
Reviewed by: Eric Diven <eric.diven@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/4208
  illumos/illumos-gate@f38cb554a5

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1986
2013-12-18 16:46:35 -08:00
renelson a5f3665168 Handle acl flags from util-linux mount command
Add acl, noacl and posixacl to option_map, avoiding ENOENT error
case when mount from util-linux-2.24 execs mount.zfs with any of
those flags

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: renelson <bnelson@nelsonbe.com>
Issue #1968
2013-12-18 16:46:20 -08:00
renelson 758d35520b Fix grammar in parse_options() error message
A minor grammar error was corrected in in the parse_options()
error handling for the ENOENT case.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: renelson <bnelson@nelsonbe.com>
Issue #1968
2013-12-17 10:48:28 -08:00
Simon Guest 383efa5743 Fix multipath bug in vdev_id caused by inconsistent field numbering
The bug is caused by multipath output like this:

35000c50056bd77a7 dm-15 HP,MB3000FCWDH
size=2.7T features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=0 status=active
| `- 2:0:16:0 sdq  65:0    active undef running
`-+- policy='round-robin 0' prio=0 status=enabled
  `- 4:0:52:0 sdfp 130:176 active undef running

Note that the pipe symbols mean that the field numbering is different
between the sdq and sdfp lines.  The fix edits out the pipe symbols.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1692
2013-12-10 09:58:35 -08:00
Richard Yao c8c8d1e7e5 Drive database update
Added:

Adata S396 (obtained from drive_id)
Apple MacBookAir3,1 SSD (obtained from drive_id)
Apple MacBookPro10,1 SSD (obtained from drive_id)
Intel 510 (obtained from drive_id)
Intel 710 (obtained from drive_id)
Intel DC S3500 (obtained from drive_id)
Netapp LUN (obtained from illumos user's sd.conf)
OCZ Agility 3 (obtained from drive_id)
OCZ Vertex (obtained from drive_id)
Samsung PM800 (obtained from drive_id)
Sandisk U100 (obtained from drive_id)
Sun Comstar (obtained from illumos user's sd.conf)

Notes:

1. The entries for the Intel DC S3500 were extrapolated from the 800GB
model's entry, which is "ATA     INTEL SSDSC2BB80".

2. The entires for the Intel 710 were extrapolated from the 120GG
model's entry, which is "ATA     INTEL SSDSA2BZ12".

3. The entires for the Intel 510 were extrapolated from the 250GB
model's entry, which is "ATA     INTEL SSDSC2MH25".

4. The entires for the Apple MacBookPro10,1 SSD were extrapolated from
the 512GB model's entry, which is "ATA     APPLE SSD SM512E". Google
searches suggest that this is a rebadged Samsung 830.

5. The entires for the Apple MacBookAir3,1 SSD were extrapolated from
the 128GB model's entry, which is "ATA     APPLE SSD TS128C". Google
searches suggest that this is a rebadged Kingston SSDNow V+ 100 (based
on Toshiba).

6. Sun Comstar is an iSCSI Target, so we cannot tell what the correct
sector size is through this method. We list it only for reference
purposes, but it is commented out. Similarly, it is not clear what the
right thing to do for Netapp is, so we comment it out.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1907
2013-12-02 14:07:26 -08:00
Yuri Pankov 54d5378fae Illumos #2583
2583 Add -p (parsable) option to zfs list

References:
  https://www.illumos.org/issues/2583
  illumos/illumos-gate@43d68d68c1

Ported-by: Gregor Kopka <gregor@kopka.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #937
2013-11-21 11:13:53 -08:00
Maximilian Mehnert 539defc873 Add missing libzfs_core to Makefiles
On some platforms symbols provided by libzfs_core and used by
libzfs were not available to the linker.  To avoid this issue
libzfs_core has been added to the list of required libraries
when building utilities which depend on libzfs.  This should
have been handled properly by libtool and it's still not
entirely clear why it wasn't on all platforms.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1841
2013-11-20 15:44:15 -08:00
Matthew Thode 09d672d331 Python 3 fixes
Future proofing for compatibility with newer versions of Python.

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1838
2013-11-08 14:30:29 -08:00
Matthew Thode 23bc1f91fc pep8 code readability changes
Update the code to follow the pep8 style guide.

References:
  http://www.python.org/dev/peps/pep-0008/

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1838
2013-11-08 14:30:22 -08:00
Tim Chase fd4f76160c Handle concurrent snapshot automounts failing due to EBUSY.
In the current snapshot automount implementation, it is possible for
multiple mounts to attempted concurrently.  Only one of the mounts will
succeed and the other will fail.  The failed mounts will cause an EREMOTE
to be propagated back to the application.

This commit works around the problem by adding a new exit status,
MOUNT_BUSY to the mount.zfs program which is used when the underlying
mount(2) call returns EBUSY.  The zfs code detects this condition and
treats it as if the mount had succeeded.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1819
2013-11-08 10:45:14 -08:00
George Wilson 5d1f7fb647 Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962
3956 ::vdev -r should work with pipelines
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3956
  https://www.illumos.org/issues/3957
  https://www.illumos.org/issues/3958
  https://www.illumos.org/issues/3959
  https://www.illumos.org/issues/3960
  https://www.illumos.org/issues/3961
  https://www.illumos.org/issues/3962
  illumos/illumos-gate@b4952e17e8

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting notes:

1. zfs_dbgmsg_print() is only used in userland. Since we do not have
   mdb on Linux, it does not make sense to make it available in the
   kernel. This means that a build failure will occur if any future
   kernel patch depends on it. However, that is unlikely given that
   this functionality was added to support zdb.

2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels.
   This preserves the existing behavior of minimal noise when running
   with -V, and -VV.

3. In vdev_config_generate() the call to nvlist_alloc() was not
   changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in
   the txg_sync context.
2013-11-05 12:23:05 -08:00
George Wilson 621dd7bb2c Illumos #3949, #3950, #3952, #3953
3949 ztest fault injection should avoid resilvering devices
3950 ztest: deadman fires when we're doing a scan
3951 ztest hang when running dedup test
3952 ztest: ztest_reguid test and ztest_fault_inject don't place nice together
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3949
  https://www.illumos.org/issues/3950
  https://www.illumos.org/issues/3951
  https://www.illumos.org/issues/3952
  illumos/illumos-gate@2c1e2b4414

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775

Porting notes:

1. The deadman thread was removed from ztest during the original
   port because it depended on Solaris thr_create() interface.
   This functionality should be reintroduced using the more
   portable pthreads.
2013-11-05 12:17:07 -08:00
Matthew Ahrens 383fc4a997 Illumos #3955
3955 ztest failure: assertion refcount_count(&tx->tx_space_written) +
     delta <= tx->tx_space_towrite
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3955
  illumos/illumos-gate@be9000cc67

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
2013-11-05 12:16:14 -08:00
Matthew Ahrens 498877baf5 Illumos #3112, #3113, #3114
3112 ztest does not honor ZFS_DEBUG
3113 ztest should use watchpoints to protect frozen arc bufs
3114 some leaked nvlists in zfsdev_ioctl

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Amdur <Matt.Amdur@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  https://www.illumos.org/issues/3112
  https://www.illumos.org/issues/3113
  https://www.illumos.org/issues/3114
  illumos/illumos-gate@cd1c8b85eb

The /proc/self/cmd watchpoint interface is specific to Solaris.
Therefore, the #3113 implementation was reworked to use the more
portable mprotect(2) system call.  When the pages are watched they
are marked read-only for protection.  Any write to the protected
address range immediately trigger a SIGSEGV.  The pages are marked
writable again when they are unwatched.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1489
2013-11-05 12:14:48 -08:00
George Wilson 03c6040bee Illumos #3236
3236 zio nop-write
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  illumos/illumos-gate@80901aea8e
  https://www.illumos.org/issues/3236

Porting Notes

1. This patch is being merged dispite an increased instance of
   https://www.illumos.org/issues/3113 being triggered by ztest.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1489
2013-11-05 12:14:21 -08:00
Keith M Wesolowski 96c2e96193 Illumos #3894
3894 zfs should not allow snapshot of inconsistent dataset
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/3894
  illumos/illumos-gate@ca48f36f20

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
2013-11-04 11:18:14 -08:00
Steven Hartland 95fd54a1c5 Illumos #3740
3740 Poor ZFS send / receive performance due to snapshot
     hold / release processing
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3740
  illumos/illumos-gate@a7a845e4bf

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775

Porting notes:

1. 13fe019870 introduced a merge conflict
   in dsl_dataset_user_release_tmp where some variables were moved
   outside of the preprocessor directive.

2. dea9dfefdd747534b3846845629d2200f0616dad made the previous merge
   conflict worse by switching KM_SLEEP to KM_PUSHPAGE. This is notable
   because this commit refactors the code, adding a new KM_SLEEP
   allocation. It is not clear to me whether this should be converted
   to KM_PUSHPAGE.

3. We had a merge conflict in libzfs_sendrecv.c because of copyright
   notices.

4. Several small C99 compatibility fixed were made.
2013-11-04 11:17:48 -08:00
Will Andrews 7bc7f25040 Illumos #3745, #3811
3745 zpool create should treat -O mountpoint and -m the same
3811 zpool create -o altroot=/xyz -O mountpoint=/mnt ignores
     the mountpoint option
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3745
  https://www.illumos.org/issues/3811
  illumos/illumos-gate@8b71377531

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
2013-11-04 10:55:25 -08:00
Matthew Ahrens d1fada1e6d Illumos #3603, #3604: bobj improvements
3603 panic from bpobj_enqueue_subobj()
3604 zdb should print bpobjs more verbosely
3871 GCC 4.5.3 does not like issue 3604 patch
Reviewed by: Henrik Mattson <henrik.mattson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Dan McDonald <danmcd@nexenta.com>

References:
  https://www.illumos.org/issues/3603
  https://www.illumos.org/issues/3604
  https://www.illumos.org/issues/3871
  illumos/illumos-gate@d04756377d

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775

Note that the patch from Illumos issue 3871 is not accepted into Illumos
at the time of this writing. It is something that I wrote when porting
this. Documentation is in the Illumos issue.
2013-10-31 14:57:51 -07:00
Ralf Ertzinger d65e738109 Add -p switch to "zpool get"
This works the same as the -p switch to "zfs get", displaying full
resolution values for appropriate attributes.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1813
2013-10-28 15:40:12 -07:00
Steven Hartland 157c9b6981 Corrected "zfs list -t <type>" syntax
in man page and in command help.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1805
2013-10-25 16:09:21 -07:00
Brian Behlendorf d738d34da5 Add dbufstat.py command
The dbufstat.py command was added to provide a conveniant way to
easily determine what ZFS is caching.  The script consumes the
raw /proc/spl/kstat/zfs/dbufs kstat data can consolidates it in
to a more human readable form.  This was designed primarily as
a tool to aid developers but it may also be useful for advanced
users who want more visibility in to what the ARC is caching.

When run without options dbufstat.py will default to showing a
list of all objects with at least one buffer present in the
cache.  The total cache space consumed by that object will be
printed on the right along with the object type.  Similar to the
arcstats.py command the -x option may used to display additional
fields.

Two other modes of operation are also supported by dbufstat.py
and the expectation is additional display modes may be added as
needed.  The -t option will summerize the total number of bytes
cached for each object type, and the -b option will show every
dbuf currently cached.

The script was designed to be consistent with arcstat.py and
includes most of the same options and funcationality.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-10-25 14:52:45 -07:00
Brian Behlendorf 11cb9d773f Increase default udev wait time
When creating a new pool, or adding/replacing a disk in an existing
pool, partition tables will be automatically created on the devices.
Under normal circumstances it will take less than a second for udev
to create the expected device files under /dev/.  However, it has
been observed that if the system is doing heavy IO concurrently udev
may take far longer.  If you also throw in some cheap dodgy hardware
it may take even longer.

To prevent zpool commands from failing due to this the default wait
time for udev is being increased to 30 seconds.  This will have no
impact on normal usage, the increase timeout should only be noticed
if your udev rules are incorrectly configured.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1646
2013-10-22 10:25:51 -07:00
Tim Chase 2e2ddc30b4 Dedup-related documentation additions for zpool and zdb.
Document the "-D" and "-T" options and the optional interval
and count or "zpool status".

Also for zpool's man page, use a consistent order for the
various "-T" options to match the program's help output.

Document the effect of additional "-D" options for zdb.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1786
2013-10-22 10:08:51 -07:00
Richard Yao 31fc19399e Generate libraries with correct DT_NEEDED entries
Libraries that depend on other libraries should list them in ELF's
DT_NEEDED field so that programs linking to them do not need to specify
those libraries unless they depend on them as well. This is not the case
in the current code and the consequence is that anything that needs a
library must know its dependencies. This is fragile and caused GRUB2's
configure script to break when a dependency was added on libblkid in
libzfs.

This resolves that problem by using LIBADD/LDADD to specify libraries in
Makefile.am instead of LDFLAGS. This ensures that proper DT_NEEDED
entries are generated and prevents GRUB2's configure script from
breaking in the presence of a libblkid dependency. This also removes
unneeded dependencies from various files.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1751
2013-10-10 16:56:51 -07:00
Richard Yao 3549721c9e Update drive database
Add Corsair Force GS drive (obtained from drive_id)
Add Kingston HyperX 3K (obtained from drive_id)
Add OCZ Vertex 4 drive (obtained from drive_id)
Add Samsung SM843T enterprise drive (obtained from drive_id)
Add entries for additional sizes of Intel 320/330/335/520 series
Add Cruical C400 (obtained from Illumos user's sd.conf)
Add Toshiba SSD (obtained from Illumos user's sd.conf)
Add Samsung's first SLC SSD (obtained from drive_id)
Add OCZ Core Series (obtained from drive_id)
Add Intel DC S3700 (obtained from drive_id)

Notes:

1. The drive identifer obtained for the Samsung SM843T was MZ7WD480. The
rest were extrapolated. The additional entries were checked with Google
to verify that such drives exist in the wild.

2. The additional entries for Intel drives were extrapolated from
existing entries. The additional entries were checked with Google to
verify that such drives exist in the wild.

3. The "ATA     C400-MTFDDAC512M" and "ATA     TOSHIBA THNSNH51" entries
are from the sd.conf of gcbirzan on freenode. Additional entries were
extrapolated from them and checked with Google.

4. I obtained the Samsung MCCOE64G entry from an actual drive. The
Samsung MCCOE32G entry was extrapolated from it and checked with
Google.

5. I obtained the SSDSC2BA10 from a 100GB Intel DC S3700 drive and
extrapolated the entries for the additional models.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1752
2013-10-09 09:16:23 -07:00
Matthew Ahrens 13fe019870 Illumos #3464
3464 zfs synctask code needs restructuring
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/3464
  illumos/illumos-gate@3b2aab1880

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1495
2013-09-04 16:01:24 -07:00
Matthew Ahrens 6f1ffb0665 Illumos #2882, #2883, #2900
2882 implement libzfs_core
2883 changing "canmount" property to "on" should not always remount dataset
2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2882
  https://www.illumos.org/issues/2883
  https://www.illumos.org/issues/2900
  illumos/illumos-gate@4445fffbbb

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1293

Porting notes:

WARNING: This patch changes the user/kernel ABI.  That means that
the zfs/zpool utilities built from master are NOT compatible with
the 0.6.2 kernel modules.  Ensure you load the matching kernel
modules from master after updating the utilities.  Otherwise the
zfs/zpool commands will be unable to interact with your pool and
you will see errors similar to the following:

  $ zpool list
  failed to read pool configuration: bad address
  no pools available

  $ zfs list
  no datasets available

Add zvol minor device creation to the new zfs_snapshot_nvl function.

Remove the logging of the "release" operation in
dsl_dataset_user_release_sync().  The logging caused a null dereference
because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the
logging functions try to get the ds name via the dsl_dataset_name()
function. I've got no idea why this particular code would have worked
in Illumos.  This code has subsequently been completely reworked in
Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring).

Squash some "may be used uninitialized" warning/erorrs.

Fix some printf format warnings for %lld and %llu.

Apply a few spa_writeable() changes that were made to Illumos in
illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and
3115 fixes.

Add a missing call to fnvlist_free(nvl) in log_internal() that was added
in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time
(zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-09-04 15:49:00 -07:00
Richard Yao bff32e0972 Implement database to workaround misreported physical sector sizes
This implements vdev_bdev_database_check(). It alters the detected
sector size of any device listed in a database of drives known to lie
about their physical sector sizes.

This is based on "6931570 Add flash devices' VID/PID to disk table to
advertising 4K physical sector size" from Open Solaris and on
sg_simple4.c from sg3_utils. About two dozen lines are taken from
sg_simple4.c, which is GPLv2 licensed. However, sg_simple4.c is
analogous to a Hello World program and is safe for us to use. We
requested that Douglas Gilbert, the author of sg_simple4.c, confirm that
this is the case. A cutdown version of his response is as follows:

```
I would consider a SCSI INQUIRY example using the Linux sg
driver interface (also written by me) as the equivalent of an
"hello world" program in C.
```

The database was created with the help of the freenode and ZFSOnLinux
communities.

Some notes:

1. The following drives both were confirmed to lie via reports in IRC
and they contain capacity information in their identifiers:

INTEL SSDSA2M080
INTEL SSDSA2M160
M4-CT256M4SSD2
WDC WD15EARS-00S
WDC WD15EARS-00Z
WDC WD20EARS-00M

The identifiers for different capacity models were extrapolated and
added under the assumption that those models also lie. Google was used
to verify that the extrapolated drive identifiers existed prior to their
inclusion.

2. The OCZ-VERTEX2 3.5 identifer applies to two drives that differ
solely in page size (and slightly in capacity). One uses 4096-byte pages
and the other uses 8192-byte pages. Both are set to use 8192-byte pages.
We could detect the page size by checking the capacity, but that would
unnecessarily complicate the code.

3. It is possible for updated drive firmware to correctly report the
sector size. There were reports of a few advanced format drives doing
that. One report stated that the vendor changed the identification
string while another was unclear on this. Both reports involved WDC
models.

4. Google was used to determine the size of pages in the listed flash
devices. Reports of 8192-byte pages took precedence over reports of
4096-byte pages.

5. Devices behind USB adapters can have their identification strings
altered. Identification strings obtained across USB adapters are
omitted and no attempt is made to correct for alterations made by USB
adapters when doing comparisons against the database. Two entries in the
Open Solaris database that appear to have been altered by a USB
adapter were omitted.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1652
2013-08-22 11:24:06 -07:00
Turbo Fredriksson 0bc7a7a754 Don't specifically open /etc/mtab - it is done in libzfs_init()
a few lines further down and we can share the open file handle.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1498
2013-08-15 10:19:38 -07:00
Turbo Fredriksson f9e459d143 Use setmntent() OR fopen()
For the same reasons it's used in libzfs_init(), this was just
overlooked because zinject gets minimal use.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1498
2013-08-15 10:09:09 -07:00
Yuri Pankov 105afebb15 Illumos #3098 zfs userspace/groupspace fail
3098 zfs userspace/groupspace fail without saying why when run as non-root
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3098
  illumos/illumos-gate@70f56fa693

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1596
2013-08-14 09:28:34 -07:00
Brian Behlendorf cd72af9c68 Fix 'zpool list -H' error code
Due to an uninitialized variable it was possible for the command
'zpool list -H' to return a non-zero error when there are no pools.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1605
2013-07-23 12:39:05 -07:00
Christer Ekholm da91c90154 Add missing -v to usage help for zpool list.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-07-22 13:39:01 -07:00
Dmitry Khasanov 131cc95ca7 Add FreeBSD 'zpool labelclear' command
The FreeBSD implementation of zfs adds the 'zpool labelclear'
command.  Since this functionality is helpful and straight
forward to add it is being included in ZoL.

References:
  freebsd/freebsd@119a041dc9

Ported-by: Dmitry Khasanov <pik4ez@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1126
2013-07-09 15:58:05 -07:00
Tim Chase 5021058756 zdb: enhancement - Display SA xattrs.
If the znode has SA xattrs, display them following the other
standard attributes.  The format used is similar to that used
when listing the contents of a ZAP.  It is as follows:

	$ zdb -vvv <pool>/<dataset> <object>
	...
	SA xattrs: <size> bytes, <number> entries
		<name1> = <value1>
		<name2> = <value2>
		...

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1581
2013-07-09 13:52:28 -07:00
Mike Leddy 5d3dc3fb72 Avoid abort() in vn_rdwr(): libzpool/kernel.c
Make sure that buffer is aligned to 512 bytes on linux so that
pread call combined with O_DIRECT does not return EINVAL.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1570
2013-07-09 11:56:43 -07:00
Craig Loomis 50fe577d1f Explicitly flush output at end of each zevent
For "zpool events -f" flush stdout to ensure the last zevent
is always printed immediately.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1568
2013-07-08 17:01:16 -07:00
Brian Behlendorf c76955eaa5 Fix parse_dataset error handling
A mount failure was accidentally introduced by commit 0c1171d
which reworked the parse_dataset() function to read pool names
from devices.  The error case where a label is read from the
device but the pool name/value pair doesn't exist was not
handled properly.  In this case we should fall back to the
previous behavior.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1560
2013-07-03 09:20:52 -07:00
George Wilson 294f68063b Illumos #3498 panic in arc_read()
3498 panic in arc_read(): !refcount_is_zero(&pbuf->b_hdr->b_refcnt)
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  illumos/illumos-gate@1b912ec710
  https://www.illumos.org/issues/3498

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1249
2013-07-02 13:34:31 -07:00
Richard Yao 3db3ff4a78 Use MAXPATHLEN instead of sizeof in snprintf
This silences a GCC 4.8.0 warning by fixing a programming error
caught by static analysis:

../../cmd/ztest/ztest.c: In function ‘ztest_vdev_aux_add_remove’:
../../cmd/ztest/ztest.c:2584:33: error: argument to ‘sizeof’
  in ‘snprintf’ call is the same expression as the destination;
  did you mean to provide an explicit length?
  [-Werror=sizeof-pointer-memaccess]
  (void) snprintf(path, sizeof (path), ztest_aux_template,
                                 ^

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1480
2013-07-02 10:39:24 -07:00
Cyril Plisko 64d7b6cf75 Override default SPA config location via environment
When using zdb with non-default SPA config file it is not convenient
to add -U <non-default-config-file-path> all the time. This commit
introduces support for setting/overriding SPA config location via
environment variable 'SPA_CONFIG_PATH'.

If -U flag is specified in the command line it will override any other
value as usual.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1545
2013-07-01 13:25:44 -07:00
Cyril Plisko 20c17b96c9 Add absent \n at the end of the help text line
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1545
2013-06-28 11:26:41 -07:00
Brian Behlendorf 0c1171dcb5 Allow fetching the pool from the device at mount
To simplify integration with the xfstests test suite the
mount.zfs helper has been extended.  When passed a block
device (/dev/sdX) to mount, instead of a pool/dataset,
the pool name will be read from any existing zfs label
and used.  This allows you to mount the root dataset of
a zfs filesystem by specifing any of the member vdevs.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-06-26 15:20:09 -07:00
George Wilson e51be06697 Illumos #3552, #3564
3552 condensing one space map burns 3 seconds of CPU in spa_sync() thread
3564 spa_sync() spends 5-10% of its time in metaslab_sync() (when not condensing)
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  illumos/illumos-gate@16a4a80742
  https://www.illumos.org/issues/3552
  https://www.illumos.org/issues/3564

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1513
2013-06-19 16:22:39 -07:00
Madhav Suresh c99c90015e Illumos #3006
3006 VERIFY[S,U,P] and ASSERT[S,U,P] frequently check if first
     argument is zero

Reviewed by Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by George Wilson <george.wilson@delphix.com>
Approved by Eric Schrock <eric.schrock@delphix.com>

References:
  illumos/illumos-gate@fb09f5aad4
  https://illumos.org/issues/3006

Requires:
  zfsonlinux/spl@1c6d149feb

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1509
2013-06-19 15:14:10 -07:00
Christ Schlacta fb02fabf9b Modified arcstat.py to run on linux
* Modified kstat_update() to read arcstats from proc.
* Fix shebang.
* Added Makefile.am entries for arcstat.py

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1506
2013-06-18 15:43:15 -07:00
Christ Schlacta 7634cd54db Added arcstat.py from FreeNAS
Original source:
  http://support.freenas.org/browser/nanobsd/Files/usr/local/bin/arcstat.py

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1506
2013-06-18 15:30:08 -07:00
Ned Bass da29fe63f0 Don't leak mount flags into kernel
When calling mount(), care must be taken to avoid passing in flags
that are used only by the user space utilities.  Otherwise we may
stomp on flags that are reserved for other purposes in the kernel.

In particular, openSUSE 12.3 kernels have added a new MS_RICHACL
super-block flag whose value conflicts with our MS_COMMENT flag. This
causes incorrect behavior such as the umask being ignored.  The
MS_COMMENT flag essentially serves as a placeholder in the option_map
data structure of zfs_mount.c, but its value is never used. Therefore
we can avoid the conflict by defining it to 0.

The MS_USERS, MS_OWNER, and MS_GROUP flags also conflict with reserved
flags in the kernel. While this is not known to have caused any
problems, it is nevertheless incorrect.  For the purposes of the
mount.zfs helper, the "users", "owner", and "group" options just serve
as hints to set additional implied options.  Therefore we now define
their associated mount flags in terms of the options that they imply
rather than giving them unique values.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1457
2013-06-18 15:30:08 -07:00
George Wilson 5853fe790d Illumos #3306, #3321
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man
     page and help

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  illumos/illumos-gate@31d7e8fa33
  https://www.illumos.org/issues/3306
  https://www.illumos.org/issues/3321

The vdev_file.c implementation in this patch diverges significantly
from the upstream version.  For consistenty with the vdev_disk.c
code the upstream version leverages the Illumos bio interfaces.
This makes sense for Illumos but not for ZoL for two reasons.

1) The vdev_disk.c code in ZoL has been rewritten to use the
   Linux block device interfaces which differ significantly
   from those in Illumos.  Therefore, updating the vdev_file.c
   to use the Illumos interfaces doesn't get you consistency
   with vdev_disk.c.

2) Using the upstream patch as is would requiring implementing
   compatibility code for those Solaris block device interfaces
   in user and kernel space.  That additional complexity could
   lead to confusion and doesn't buy us anything.

For these reasons I've opted to simply move the existing vn_rdwr()
as is in to the taskq function.  This has the advantage of being
low risk and easy to understand.  Moving the vn_rdwr() function
in to its own taskq thread also neatly avoids the possibility of
a stack overflow.

Finally, because of the additional work which is being handled by
the free taskq the number of threads has been increased.  The
thread count under Illumos defaults to 100 but was decreased to 2
in commit 08d08e due to contention.  We increase it to 8 until
the contention can be address by porting Illumos #3581.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1354
2013-05-03 16:53:52 -07:00
Brian Behlendorf 937210a54b Fix zinject list handlers
The zfs_fd must be opened before calling print_all_handlers() or
the ioctl() cannot be used to the zfs control device.  This brings
the zinject code back in sync with the Illumos implementation.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-05-01 17:05:58 -07:00
George.Wilson cc92e9d0c3 3246 ZFS I/O deadman thread
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

NOTES: This patch has been reworked from the original in the
following ways to accomidate Linux ZFS implementation

*) Usage of the cyclic interface was replaced by the delayed taskq
   interface.  This avoids the need to implement new compatibility
   code and allows us to rely on the existing taskq implementation.

*) An extern for zfs_txg_synctime_ms was added to sys/dsl_pool.h
   because declaring externs in source files as was done in the
   original patch is just plain wrong.

*) Instead of panicing the system when the deadman triggers a
   zevent describing the blocked vdev and the first pending I/O
   is posted.  If the panic behavior is desired Linux provides
   other generic methods to panic the system when threads are
   observed to hang.

*) For reference, to delay zios by 30 seconds for testing you can
   use zinject as follows: 'zinject -d <vdev> -D30 <pool>'

References:
  illumos/illumos-gate@283b84606b
  https://www.illumos.org/issues/3246

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1396
2013-05-01 17:05:52 -07:00
Chris Dunlop 254255f735 Trivial spelling fix
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1411
2013-04-19 15:43:16 -07:00
Ned Bass 92db59ca3b Refresh links to web site
A few files still refer to @behlendorf's private fork on
github.  Use the primary web site URL instead.  Two typos
are also corrected.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-03-06 15:46:41 -08:00
Richard Yao b01615d5ac Constify structures containing function pointers
The PaX team modified the kernel's modpost to report writeable function
pointers as section mismatches because they are potential exploit
targets. We could ignore the warnings, but their presence can obscure
actual issues. Proper const correctness can also catch programming
mistakes.

Building the kernel modules against a PaX/GrSecurity patched Linux 3.4.2
kernel reports 133 section mismatches prior to this patch. This patch
eliminates 130 of them. The quantity of writeable function pointers
eliminated by constifying each structure is as follows:

vdev_opts_t             52
zil_replay_func_t       24
zio_compress_info_t     24
zio_checksum_info_t     9
space_map_ops_t         7
arc_byteswap_func_t     5

The remaining 3 writeable function pointers cannot be addressed by this
patch. 2 of them are in zpl_fs_type. The kernel's sget function requires
that this be non-const. The final writeable function pointer is created
by SPL_SHRINKER_DECLARE. The kernel's set_shrinker() and
remove_shrinker() functions also require that this be non-const.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1300
2013-03-04 08:49:32 -08:00
Brian Behlendorf 8128bd89fb Fix hot spares
The issue with hot spares in ZoL is because it opens all leaf
vdevs exclusively (O_EXCL).  On Linux, exclusive opens cause
subsequent exclusive opens to fail with EBUSY.

This could be resolved by not opening any of the devices
exclusively, which is what Illumos does, but the additional
protection offered by exclusive opens is desirable.  It cleanly
prevents you from accidentally adding an in-use non-ZFS device
to your pool.

To fix this we very slightly relaxed the usage of O_EXCL in
the following ways.

1) Functions which open the device but only read had the
   O_EXCL flag removed and were updated to use O_RDONLY.

2) A common holder was added to the vdev disk code.  This
   allow the ZFS code to internally open the device multiple
   times but non-ZFS callers may not.

3) An exception was added to make_disks() for hot spare when
   creating partition tables.  For hot spare devices which
   are already opened exclusively we skip creating the partition
   table because this must already have been done when the disk
   was originally added as a hot spare.

Additional minor changes include fixing check_in_use() to use
a partition instead of a slice suffix.  And is_spare() was moved
above make_disks() to avoid adding a forward reference.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #250
2013-03-01 13:31:02 -08:00
Tim Connors c5b247f335 -x shouldn't warn about old on-disk format or unavailable features
`zpool status -x` should only flag errors or where the pool is
unavailable.  If it imported fine but isn't using the latest features
available in the code, that's not an error.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1319
2013-02-28 09:17:09 -08:00
Brian Behlendorf f52b31eaf0 Honor 80 character limit in 'zpool status'
This is a minor nit, but the second line of the 'action' message
when you need to upgrade your pool to support feature flags exceeds
the standard 80 character limit.  Fix it by moving the word
'feature' on to the third line.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-31 11:06:57 -08:00
Brian Behlendorf dbf763b39b Retire zpool_id infrastructure
In the interest of maintaining only one udev helper to give vdevs
user friendly names, the zpool_id and zpool_layout infrastructure
is being retired.  They are superseded by vdev_id which incorporates
all the previous functionality.

Documentation for the new vdev_id(8) helper and its configuration
file, vdev_id.conf(5), can be found in their respective man pages.
Several useful example files are installed under /etc/zfs/.

  /etc/zfs/vdev_id.conf.alias.example
  /etc/zfs/vdev_id.conf.multipath.example
  /etc/zfs/vdev_id.conf.sas_direct.example
  /etc/zfs/vdev_id.conf.sas_switch.example

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #981
2013-01-29 12:23:17 -08:00
Ned Bass ba43f4565a vdev_id: improve keyword parsing flexibility
The vdev_id udev helper strictly requires configuration file keywords
to always be anchored at the beginning of the line and to be followed
by a space character.  However, users may prefer to use indentation or
tab delimitation.  Improve flexibility by simply requiring a keyword
to be the first field on the line.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1239
2013-01-25 13:44:32 -08:00
Christopher Siden e6f7d01502 Illumos #3397, #3398
3397 zdb <pool> <objnum> output is too verbose
3398 zdb can't dump feature flags zap objects

Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@nexenta.com>

References:
  illumos/illumos-gate@e690fb27a7
  https://www.illumos.org/issues/3397
  https://www.illumos.org/issues/3398

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-11 16:42:50 -08:00
Yuri Pankov 5990da81a7 Illumos #1884, #3028, #3048, #3049, #3060, #3061, #3093
1884 Empty "used" field for zfs *space commands
3028 zfs {group,user}space -n prints (null) instead of numeric GID/UID
3048 zfs {user,group}space [-s|-S] is broken
3049 zfs {user,group}space -t doesn't really filter the results
3060 zfs {user,group}space -H output isn't tab-delimited
3061 zfs {user,group}space -o doesn't use specified fields order
3093 zfs {user,group}space's -i is noop

Reviewed by: Garry Mills <gary_mills@fastmail.fm>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  illumos/illumos-gate@89f5d17b06
  illumos changeset: 13803:b5e49d71ff0e
  https://www.illumos.org/issues/1884
  https://www.illumos.org/issues/3028
  https://www.illumos.org/issues/3048
  https://www.illumos.org/issues/3049
  https://www.illumos.org/issues/3060
  https://www.illumos.org/issues/3061
  https://www.illumos.org/issues/3093

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1194
2013-01-11 09:17:19 -08:00
Yuri Pankov 240245896a Illumos #1377 `zpool status -D' should tell if there are no DDT entries
1337 `zpool status -D' should tell if there are no DDT entries

Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Albert Lee <trisk@nexenta.com>

References:
  illumos/illumos-gate@ce72e614c1
  illumos changeset: 13432:d1ad8d106d64
  https://www.illumos.org/issues/1337

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-11 09:17:13 -08:00
Brian Behlendorf a1e147eef8 Add /sbin/fsck.zfs helper
A fsck helper to accomidate distributions that expect to be able
to execute a fsck on all filesystem types.  Currently this script
does nothing but it could be extended to act as a compatibility
wrapper for 'zpool scrub'.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #964
2013-01-09 16:54:58 -08:00
Brian Behlendorf 87bdc45ccb Report realpath() canonicalization error
Rather than just reporting the failure include the passed
mount point and error number.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1153
2013-01-09 16:54:58 -08:00
George Wilson 1eb5bfa3dc Illumos #3145, #3212
3145 single-copy arc
3212 ztest: race condition between vdev_online() and spa_vdev_remove()

Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e
  illumos changeset: 13840:97fd5cdf328a
  https://www.illumos.org/issues/3145
  https://www.illumos.org/issues/3212

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #989
Closes #1137
2013-01-08 10:35:44 -08:00
George Wilson ea0b2538cd Illumos #3349: zpool upgrade -V bumps the on disk version number
3349 zpool upgrade -V bumps the on disk version number, but leaves
the in core version
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@nexenta.com>

References:
  illumos/illumos-gate@25345e4666
  https://www.illumos.org/issues/3349

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:43 -08:00
Matthew Ahrens 29809a6cba Illumos #3086: unnecessarily setting DS_FLAG_INCONSISTENT on async
3086 unnecessarily setting DS_FLAG_INCONSISTENT on async
destroyed datasets
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@ce636f8b38
  illumos changeset: 13776:cd512c80fd75
  https://www.illumos.org/issues/3086

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:43 -08:00
Christopher Siden b9b24bb4ca Illumos #2762: zpool command should have better support for feature flags
2762 zpool command should have better support for feature flags
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@57221772c3
  https://www.illumos.org/issues/2762

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:43 -08:00
George Wilson 3bc7e0fb0f Illumos #3090 and #3102
3090 vdev_reopen() during reguid causes vdev to be treated as corrupt
3102 vdev_uberblock_load() and vdev_validate() may read the wrong label

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@dfbb943217
  illumos changeset: 13777:b1e53580146d
  https://www.illumos.org/issues/3090
  https://www.illumos.org/issues/3102

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #939
2013-01-08 10:35:42 -08:00
Brian Behlendorf 5ac0c30a94 Revert "Temporarily disable the reguid test."
This reverts commit d135245791.
Since feature flags have now been merged we can apply the real
upstream fix from Illumos.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #997
2013-01-08 10:35:42 -08:00
Christopher Siden 9ae529ec5d Illumos #2619 and #2747
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@53089ab7c8
  illumos/illumos-gate@ad135b5d64
  illumos changeset: 13700:2889e2596bd6
  https://www.illumos.org/issues/2619
  https://www.illumos.org/issues/2747

NOTE: The grub specific changes were not ported.  This change
must be made to the Linux grub packages.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:35 -08:00
Will Rouesnel 462ee8e3f3 Allow fake mounts to succeed on non-legacy filesystems.
mountall in Debian depends on being able to pass the -f parameter to
mount, which specifies a fake mount and just updates the mtab. Currently
mount.zfs will fail such a request if it is not passed with -o zfsutil.

This patch allows a fake mount on a non-legacy filesystem to succeed in
the same manner as a -o remount does, thus enabling mountall to work
correctly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1167
2013-01-07 11:30:27 -08:00
Ned Bass 2957f38d78 vdev_id support for device link aliases
Add a vdev_id feature to map device names based on already defined
udev device links.  To increase the odds that vdev_id will run after
the rules it depends on, increase the vdev.rules rule number from 60
to 69.  With this change, vdev_id now provides functionality analogous
to zpool_id and zpool_layout, paving the way to retire those tools.

A defined alias takes precedence over a topology-derived name, but the
two naming methods can otherwise coexist. For example, one might name
drives in a JBOD with the sas_direct topology while naming an internal
L2ARC device with an alias.

For example, the following lines in vdev_id.conf will result in the
creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same
target as the device link specified in the third field.

  #     by-vdev
  #     name     fully qualified or base name of device link
  alias d1       /dev/disk/by-id/wwn-0x5000c5002de3b9ca
  alias d2       wwn-0x5000c5002def789e

Also perform some minor vdev_id cleanup, such as removal of the unused
-s command line option.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #981
2012-12-03 14:04:47 -08:00
Cyril Plisko 4588bf5701 Make zpool attach -o ashift=... actually work
Commit df83110856 missed update to
getopt() call, while delivering all the rest. This commit adds
"o" to getopt().

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #566
2012-11-30 13:50:26 -08:00
Cyril Plisko 38b344d22a vdev_id fails to handle complex device topologies
While expanding positional parameters shell requires non-single
digits to be enclosed in braces. When the SAS topology is
non-trivial the number of positional parameters generated internally
by vdev_id script (using set -- ...) easily crosses single digit limit
and vdev_id fails to generate links.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1119
2012-11-29 13:07:47 -08:00
Ned Bass a6ef9522ea Make vdev_id POSIX sh compatible
Full bash may not be available in all environments where udev helpers
run, such as in an initial ramdisk.  To avoid breakage in this case,
remove use of bash-specific features such as variable arrays and the
`declare' keyword from the vdev_id script.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #870
2012-11-27 14:23:22 -08:00
nordaux 33364b15d3 mount.zfs: canonicalize mount point for mtab
Canonicalize the mount point passed to the mount.zfs helper.
This way a clean path is always added to mtab which ensures
the umount can properly locate and remove the entry.

Test case:
$ mkdir /mnt/foo
$ mount -t zfs zpool/foo /mnt/../mnt/foo////
$ umount /mnt/foo
$ cat /etc/mtab | grep zpool/foo
zpool/foo /mnt/../mnt/foo//// zfs rw 0 0

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #573
2012-11-15 14:28:52 -08:00
Cyril Plisko df83110856 Add "-o ashift" to zpool add and zpool attach
When adding devices to an existing pool "ashift" property is
auto-detected.  However, if this property was overridden at
the pool creation time (i.e. zpool create -o ashift=12 tank ...)
this may not be what the user wants.  This commit lets the user
specify the value of "ashift" property to be used with newly
added drives. For example,

    zpool add -o ashift=12 tank disk1
    zpool attach -o ashift=12 tank disk1 disk2

Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #566
2012-11-15 11:06:14 -08:00
George Wilson 32a9872bba Illumos #2671: zpool import should not fail if vdev ashift has increased
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

Refererces to Illumos issue:
      https://www.illumos.org/issues/2671

This patch has been slightly modified from the upstream Illumos
version.  In the upstream implementation a warning message is
logged to the console.  To prevent pointless console noise this
notification is now posted as a "ereport.fs.zfs.vdev.bad_ashift"
event.

The event indicates a non-optimial (but entirely safe) ashift
value was used to create the pool.  Depending on your workload
this may impact pool performance.  Unfortunately, the only way
to correct the issue is to recreate the pool with a new ashift.

NOTE: The unrelated fix to the comment in zpool_main.c appears
in the upstream commit and was preserved for consistnecy.

Ported-by: Cyril Plisko <cyril.plisko@mountall.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #955
2012-11-15 11:05:59 -08:00
Brian Behlendorf e8fd45a0f9 Add ddt_object_count() error handling
The interface for the ddt_zap_count() function assumes it can
never fail.  However, internally ddt_zap_count() is implemented
with zap_count() which can potentially fail.  Now because there
was no way to return the error to the caller a VERIFY was used
to ensure this case never happens.

Unfortunately, it has been observed that pools can be damaged in
such a way that zap_count() fails.  The result is that the pool can
not be imported without hitting the VERIFY and crashing the system.

This patch reworks ddt_object_count() so the error can be safely
caught and returned to the caller.  This allows a pool which has
be damaged in this way to be safely rewound for import.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #910
2012-10-29 08:57:45 -07:00
Brian Behlendorf eac4720465 Allow 'zpool replace' to use short device names
The 'zpool replace' command would fail when given a short name
because unlike on other platforms the short name cannot be
deterministically expanded to a single path.  Multiple path
prefixes must be checked and in addition the partition suffix
for whole disks is determined by the prefix.

To handle this complexity a zfs_strcmp_pathname() function was
added which takes either a short or fully qualified device name.
Short names will be expanded using the prefixes in the default
import search path, or the ZPOOL_IMPORT_PATH environment variable
if it's defined.  All posible expansions are then compared against
the comparison path.  Care is taken to strip redundant slashes to
ensure legitimate matches are not missed.

In the context of this work the existing zfs_resolve_shortname()
function was extended to consider the ZPOOL_IMPORT_PATH when set.
The zfs_append_partition() interface was also simplified to take
only a single buffer.

The vast majority of these changes rework existing Linux specific
code which was originally written to accomidate udev.  However,
there is some minimal cleanup which removes Illumos specific code.
This was done to improve readability but the basic flow and intent
of the upstream code was maintained.

These changes are the logical conclusion of the previos work to
adjust the 'zpool import' search behavior, see commit 44867b6a.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #544
Closes #976
2012-10-22 08:45:58 -07:00
Brian Behlendorf 26099167e6 Disable ztest deadman timer
The ztest deadman timer has been causing false positives in the
testing VMs.  To make it easier to spot possible regressions
I'm disabling this timer.  The buildbot test infrastructure
will still mark ztest instances which take to long to complete
as failures.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1018
2012-10-14 19:35:09 -07:00
Brian Behlendorf ae380cfa76 Realpath arg 2 must be a minimum of PATH_MAX
The realpath(3) function expects that when a buffer is passed
for the 'resolved_path' that it be at least PATH_MAX in length.
If it's not a buffer overflow may occur.

Therefore the passed buffer size is changed from MAXNAMELEN to
MAXPATHLEN.  We also take this opertunity to dynamically allocate
the buffer to keep it off the stack.

  warning: call to '__realpath_chk_warn' declared with attribute
  warning: second argument of realpath must be either NULL or at
  least PATH_MAX bytes long buffer [enabled by default]

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:10 -07:00
Brian Behlendorf 5be98cfe2f Verify the return value for warn_unused_result functions
Under Linux the following functions are flagged with the
attribute warn_unused_result, this triggers a warning when
ever they are used without checking the return value.

To handle this case we check the result VERIFY().  It's
better to detect this immediately on failure rather than
segfault farther down in the function.

  ../../cmd/ztest/ztest.c:6033:2: warning:
  ignoring return value of 'asprintf', declared with
  attribute warn_unused_result [-Wunused-result]
  ../../cmd/ztest/ztest.c:739:3: warning:
  ignoring return value of 'realpath', declared with
  attribute warn_unused_result [-Wunused-result]

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:10 -07:00
Brian Behlendorf facbbe4366 Replace tempnam() with mkstemp()
The use of tempnam() is racy and it should be avoided in favor of
mkstemp().  According to the Linux tempnam(3) man page.

  "Although tempnam() generates names that are difficult to guess,
  it is nevertheless possible that between the time that tempnam()
  returns a pathname, and the time that the program opens it, another
  program might create that pathname using open(2), or create it as
  a symbolic link.  This can lead to security holes.  To avoid such
  possibilities, use the open(2) O_EXCL flag to open the  pathname.
  Or better yet, use mkstemp(3) or tmpfile(3)."

This issue was flagged by gcc.

  ztest.o: In function `setup_data_fd': cmd/ztest/ztest.c:5822:
  warning: the use of `tempnam' is dangerous, better use `mkstemp'

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:10 -07:00
Brian Behlendorf 483106eb71 Minimize ztest stack frame size
To ensure ztest behaves as similarly as possible to the kernel
implementation of ZFS we attempt to honor the kernel stack limits.
This includes keeping the individual stack frame sizes under 1K
in size.  We currently use gcc to detect and enforce this limit.

Therefore to get this building cleanly with full debugging enabled
the stack usage in the following functions has been reduced by
moving the buffer to the heap.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:09 -07:00
Etienne Dechamps 9d81146b01 Use dynamic file descriptor numbers in ztest.
Currently, ztest expects to get 3 and 4 as the file descriptors for
data and random files, respectively. This is quite fragile and breaks
easily if ztest is run with these file descriptors already opened
(e.g. in a complex shell script).

This patch fixes the issue by removing the assumptions on the file
descriptor numbers that open() returns.

For the random file (/dev/urandom), the new code doesn't rely on a
shared file descriptor; instead, it reopens the file in the child.

For the data file, the new code writes the file descriptor number into
a "ZTEST_FD_DATA" environment variable so that it can be recovered
after the execv() call.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:09 -07:00
Christopher Siden 22257dc0d5 Fix mmap() usage in ztest.
illumos/illumos-gate@ad135b5d64
Illumos changeset: 13700:2889e2596bd6

Note that this is only a partial port of the aforementioned Illumos
changeset.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

Ported to zfsonlinux by: Etienne Dechamps <etienne.dechamps@ovh.net>
2012-10-04 13:19:09 -07:00
Chris Siden c242c188fd Illumos #1950: ztest backwards compatibility testing option.
illumos/illumos-gate@420dfc9585
Illumos changeset: 13571:a5771a96228c

1950 ztest backwards compatibility testing option

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>

Ported-by: Etienne Dechamps <etienne.dechamps@ovh.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:18:53 -07:00
Etienne Dechamps d135245791 Temporarily disable the reguid test.
Currently, ztest fails with the following error:

    error: Pool 'ztest' has encountered an uncorrectable I/O failure
    and the failure mode property for this pool is set to panic.

We know how to fix it (see issue #939), but it may take some time
before we get around to merging the fix, which has some heavy
dependencies.

In the mean time, it is not ideal to be unable to use ztest just
because of a small isolated issue, so this patch works around the
problem by disabling the reguid test. This is just a temporary hack to
keep ztest usable.

The reguid test will be enabled again when the proper fix is merged.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #997
2012-10-03 13:59:02 -07:00
Etienne Dechamps 6aec1cd5a6 Fix ztest vdev file paths.
Currently, in several instances (but not all), ztest generates vdev
file paths using a statement similar to this:

    snprintf(path, sizeof (path), ztest_dev_template, ...);

This worked fine until 40b84e7aec, which
changed path to be a pointer to the heap instead of an array allocated
on the stack. Before this change, sizeof(path) would return the size of
the array; now, it returns the size of the pointer instead.

As a result, the aforementioned sprintf statement uses the wrong size
and truncates the vdev file path to the first 4 or 8 bytes (depending
on the architecture). Typically, with default settings, the file path
will become "/tmp/zt" instead of "/test/ztest.XXX".

This issue only exists in ztest_vdev_attach_detach() and
ztest_fault_inject(), which explains why ztest doesn't fail right away.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
2012-10-03 13:32:48 -07:00
Etienne Dechamps 0aebd4f9e3 Create threads in detached state in userspace.
Currently, thread_create(), when called in userspace, creates a
joinable (i.e. not detached thread). This is the pthread default.

Unfortunately, this does not reproduce kthreads behavior (kthreads
are always detached). In addition, this contradicts the original
Solaris code which creates userspace threads in detached mode.

These joinable threads are never joined, which leads to a leakage of
pthread thread objects ("zombie threads"). This in turn results in
excessive ressource consumption, and possible ressource exhaustion in
extreme cases (e.g. long ztest runs).

This patch fixes the issue by creating userspace threads in detached
mode. The only exception is ztest worker threads which are meant to be
joinable.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
2012-10-03 13:32:48 -07:00
Bill Pijewski 37abac6d55 Illumos #2703: add mechanism to report ZFS send progress
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2703

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-19 13:39:06 -07:00
Chris Siden 1bd201e70d Illumos #1948: zpool list should show more detailed pool info
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  https://www.illumos.org/issues/1948

Ported by:	Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #685
2012-09-19 13:39:05 -07:00
Richard Lowe dd4769adc0 Illumos #2088 zdb could use a reasonable manual page
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
      https://www.illumos.org/issues/2088

Ported by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #682
2012-09-18 09:09:13 -07:00
Brian Behlendorf 44867b6d6e Improve `zpool import` search behavior
The goal of this change is to make 'zpool import' prefer to use
the peristent /dev/mapper or /dev/disk/by-* paths.  These are far
preferable to the devices in /dev/ whos names are not persistent
and are determined by the order in which a device is detected.

This patch improves things by changing the default search path from
just to the top level /dev/ directory to (in order):

  /dev/disk/by-vdev   - Custom rules, use first if they exist
  /dev/disk/zpool     - Custom rules, use first if they exist
  /dev/mapper         - Use multipath devices before components
  /dev/disk/by-uuid   - Single unique entry and persistent
  /dev/disk/by-id     - May be multiple entries and persistent
  /dev/disk/by-path   - Encodes physical location and persistent
  /dev/disk/by-label  - Custom persistent labels
  /dev                - UNSAFE device names will change

The default search path can be overriden by setting the
ZPOOL_IMPORT_PATH environment variable.  This must be a colon
delimited list of paths which are searched for vdevs.  If the
'zpool import -d' option is specified only those listed paths
will be searched.

Finally, when multiple paths to the same device are found.  If one
of the paths is an exact match for the path used last time to import
the pool it will be used.  When there are no exact matches the
prefered path will be determined by the provided search order.

This means you can still import a pool and force specific names by
providing the -d <path> option.  And the prefered names will persist
as long as those paths exist on your system.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #965
2012-09-17 13:49:07 -07:00
Cyril Plisko 8e8e7f35b7 Fix zdb printf format string for ZIL data blocks
Without this fix the zdb printouts of ZIL data blocks look full of FF
due to printf() handling its arguments as int by default.

Here is the output before the fix

                TX_WRITE            len   4136, txg 1093817, seq 149231
                        foid 4242, offset 0, length f68
                        G FFFFFF8EFFFFFF87FFFFFF91FFFFFFCC 1c
FFFFFFAFFFFFFFC9FFFFFFBAZ FFFFFFC3

And the same after the fix

                TX_WRITE            len   4136, txg 1093817, seq 149231
                        foid 4242, offset 0, length f68
                        G 8E8791CC 1cAFC9BAZ C3

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #962
2012-09-13 09:02:12 -07:00
Cyril Plisko af909a1089 Illumos #3064: usr/src/cmd/zpool/zpool_main.c misspells "successful"
Reviewed by: Andrew Stormont <Andrew.Stormont@nexenta.com>
Reviewed by: Kartik Mistry <kartik.mistry@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>

References:
      https://www.illumos.org/issues/3064

Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-11 10:19:50 -07:00
Etienne Dechamps b815ff9a8f Silence "setting dataset to sync always" message in ztest.
ztest outputs a message when testing sync=always no matter what the
verbosity level is. There is no point outputting this message for low
verbosity levels.

With this patch the message is only displayed at verbosity level 5 or
above. The result is less output pollution.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #951
2012-09-10 10:55:44 -07:00
Brian Behlendorf 1ecc6d1265 Add zstreamdump .gitignore
When zstreamdump was merged in commit b79fc3f we failed to add
the needed .gitignore file.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-06 14:23:11 -07:00
Etienne Dechamps ba7dbeb22e Add libnvpair to mount_zfs dependencies
Commit e6f290535c added libzpool to
the mount_zfs dependencies.  This brought in the nvpair symbols
which are used by libzpool.  To resolve this include the libnvpair
library for mount_zfs even though mount_zfs doesn't directly
require any of these symbols.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #926
2012-09-02 15:36:09 -07:00
Martin Matuska b79fc3fea9 Add zstreamdump(8) command to examine ZFS send streams.
Obtained from: illumos-gate revision 11935:538c866aaac6
Source: ssh://anonhg@hg.illumos.org/illumos-gate

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #905
2012-09-02 14:54:27 -07:00
Etienne Dechamps e6f290535c Fix mount_zfs dependency on libzpool.
mount_zfs depends on libzpool for zfs_prop_written since
330d06f90d. Unfortunately, the Makefile
for mount_zfs has not been modified to reflect this. As a result,
libtool doesn't know about the dependency, which may result in the wrong
libzpool being used during the build (e.g. the libzpool from the system
instead of the libzpool from the build directory).

This patch adds the dependency to fix the issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes #909.
2012-08-30 16:06:46 -07:00
Brian Behlendorf ca8b5af89d Remove autotools products
Remove all of the generated autotools products from the repository
and update the .gitignore files accordingly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #718
2012-08-27 11:47:44 -07:00
Christopher Siden e956d65106 Illumos #1796, #2871, #2903, #2957
1796 "ZFS HOLD" should not be used when doing "ZFS SEND" from a read-only pool
2871 support for __ZFS_POOL_RESTRICT used by ZFS test suite
2903 zfs destroy -d does not work
2957 zfs destroy -R/r sometimes fails when removing defer-destroyed snapshot
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/1796
  https://www.illumos.org/issues/2871
  https://www.illumos.org/issues/2903
  https://www.illumos.org/issues/2957

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-23 10:40:02 -07:00
Eric Schrock db49968e5c Illumos #2635: 'zfs rename -f' to perform force unmount
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <George.Wilson@delphix.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/2635

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #717
2012-08-23 10:39:43 -07:00
Andrew Stormont e346ec25af Illumos #1936: add support for "-t <datatype>" argument to zfs get
Reviewed by: Kartik Mistry <kartik@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1936

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #681
2012-08-23 10:35:59 -07:00
Alexander Eremin 684e8c0643 Illumos #1726: Removal of pyzfs broke delegation for volumes
Reviewed by: Andrew Stormont <andyjstormont@googlemail.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>

References:
  https://www.illumos.org/issues/1726

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-23 10:35:37 -07:00
Alexander Eremin 79e722432f Illumos #1977: zfs allow arguments not parsed correctly after pyzfs removal
Reviewed by: Garrett D'Amore <garrett.damore@gmail.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1977

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-23 10:21:04 -07:00
Dan McDonald d96eb2b153 Illumos #1693: persistent 'comment' field for a zpool
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1693

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #678
2012-08-08 11:49:37 -07:00
Etienne Dechamps ee5fd0bb80 Set zvol discard_granularity to the volblocksize.
Currently, zvols have a discard granularity set to 0, which suggests to
the upper layer that discard requests of arbirarily small size and
alignment can be made efficiently.

In practice however, ZFS does not handle unaligned discard requests
efficiently: indeed, it is unable to free a part of a block. It will
write zeros to the specified range instead, which is both useless and
inefficient (see dnode_free_range).

With this patch, zvol block devices expose volblocksize as their discard
granularity, so the upper layer is aware that it's not supposed to send
discard requests smaller than volblocksize.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #862
2012-08-07 14:55:31 -07:00
Matthew Ahrens 330d06f90d Illumos #1644, #1645, #1646, #1647, #1708
1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by
     destroying multiple snapshots
1708 adjust size of zpool history data

References:
  https://www.illumos.org/issues/1644
  https://www.illumos.org/issues/1645
  https://www.illumos.org/issues/1646
  https://www.illumos.org/issues/1647
  https://www.illumos.org/issues/1708

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  This change has reordered
all of the new ioctl()s to the end of the list.  This should
help minimize this issue in the future.

Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Albert Lee <trisk@opensolaris.org>
Approved by: Garrett D'Amore <garret@nexenta.com>

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #826
Closes #664
2012-07-31 09:25:30 -07:00
Brian Behlendorf c171ea71bb Allow '-o remount' for non-legacy datasets
This is done for compatibility with existing Linux infrastructure.

In particular, when using zfs as a root filesystem there are init
scripts which as part of shutdown remount root read-only.  Also,
the new systemd infrastructure being used by Fedora expects to be
able to remount a file system read-write.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #847
2012-07-30 15:58:02 -07:00
Richard Yao 739a1a82e0 Linux 3.5 compat, end_writeback() changed to clear_inode()
The end_writeback() function was changed by moving the call to
inode_sync_wait() earlier in to evict().   This effecitvely changes
the ordering of the sync but it does not impact the details of
the zfs implementation.

However, as part of this change end_writeback() was renamed to
clear_inode() to reflect the new semantics.  This change does
impact us and clear_inode() now maps to end_writeback() for
kernels prior to 3.5.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #784
2012-07-23 12:29:36 -07:00
Richard Yao ea1fdf46e2 Linux 3.5 compat, iops->truncate_range() removed
The vmtruncate_range() support has been removed from the kernel in
favor of using the fallocate method in the file_operations table.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
2012-07-23 12:29:32 -07:00
Richard Yao 756c3e5a9c Linux 3.5 compat, eops->encode_fh() takes inodes
The export_operations member ->encode_fh() has been updated to
take both the child and parent inodes.  This interface used to
take the child dentry and a bool describing if the parent is needed.

NOTE: While updating this code I noticed that we do not currently
cleanly handle the case where we're passed a connectable parent.
This code should be audited to make sure we're doing the right thing.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
2012-07-23 12:29:23 -07:00
Etienne Dechamps b5a28807cd Move partition scanning from userspace to module.
Currently, zpool online -e (dynamic vdev expansion) doesn't work on
whole disks because we're invoking ioctl(BLKRRPART) from userspace
while ZFS still has a partition open on the disk, which results in
EBUSY.

This patch moves the BLKRRPART invocation from the zpool utility to the
module. Specifically, this is done just before opening the device in
vdev_disk_open() which is called inside vdev_reopen(). This requires
jumping through some hoops to get to the disk device from the partition
device, and to make sure we can still open the partition after the
BLKRRPART call.

Note that this new code path is triggered on dynamic vdev expansion
only; other actions, like creating a new pool, are unchanged and still
call BLKRRPART from userspace.

This change also depends on API changes which are available in 2.6.37
and latter kernels.  The build system has been updated to detect this,
but there is no compatibility mode for older kernels.  This means that
online expansion will NOT be available in older kernels.  However, it
will still be possible to expand the vdev offline.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #808
2012-07-17 09:17:31 -07:00
Garrett D'Amore 3541dc6d02 Illumos #1748: desire support for reguid in zfs
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1748

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.

Ported by:     Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #665
2012-07-11 13:08:56 -07:00
Pawel Jakub Dawidek 0cee24064a Speed up 'zfs list -t snapshot -o name -s name'
FreeBSD #xxx:  Dramatically optimize listing snapshots when user
requests only snapshot names and wants to sort them by name, ie.
when executes:

  # zfs list -t snapshot -o name -s name

Because only name is needed we don't have to read all snapshot
properties.

Below you can find how long does it take to list 34509 snapshots
from a single disk pool before and after this change with cold and
warm cache:

    before:

        # time zfs list -t snapshot -o name -s name > /dev/null
        cold cache: 525s
        warm cache: 218s

    after:

        # time zfs list -t snapshot -o name -s name > /dev/null
        cold cache: 1.7s
        warm cache: 1.1s

NOTE: This patch only appears in FreeBSD.  If/when Illumos picks up
the change we may want to drop this patch and adopt their version.
However, for now this addresses a real issue.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #450
2012-06-14 09:49:04 -07:00
Brian Behlendorf fe2fc8f6d3 Workaround for failing zvol_id
This is not a proper fix.  It is just a workaround for the stack
smashing detected by gcc in zvol_id.  We simply disable the gcc
stack protector for now when building the zvol_id udev helper.
Once the root cause is resolved this patch should be reverted.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issues #569
2012-06-13 11:25:17 -07:00
Daniel Verite 92e91da208 Include <locale.h> to avoid error: 'LC_ALL' undeclared.
When compiling ZFS with CFLAGS=-O0 it will trigger the following error.
Resolve the issue by properly including locale.h.

  ../../cmd/mount_zfs/mount_zfs.c: In function 'main':
  ../../cmd/mount_zfs/mount_zfs.c:318:2: warning: implicit declaration
      of function 'setlocale' [-Wimplicit-function-declaration]
  ../../cmd/mount_zfs/mount_zfs.c:318:19: error: 'LC_ALL' undeclared
      (first use in this function)

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #724
2012-06-11 10:21:40 -07:00
Richard Yao 6a0936babc Linux 3.4 compat, d_make_root() replaces d_alloc_root()
torvalds/linux@adc0e91ab1 introduced
introduced d_make_root() as a replacement for d_alloc_root(). Further
commits appear to have removed d_alloc_root() from the Linux source
tree. This causes the following failure:

  error: implicit declaration of function 'd_alloc_root'
  [-Werror=implicit-function-declaration]

To correct this we update the code to use the current d_make_root()
interface for readability.  Then we introduce an autotools check
to determine if d_make_root() is available.  If it isn't then we
define some compatibility logic which used the older d_alloc_root()
interface.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #776
2012-06-11 10:04:49 -07:00
Ned A. Bass 821b683436 Add vdev_id for JBOD-friendly udev aliases
vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path
in a storage topology to a channel name.  The channel name is combined
with a disk enclosure slot number to create an alias that reflects the
physical location of the drive.  This is particularly helpful when it
comes to tasks like replacing failed drives.  Slot numbers may also be
re-mapped in case the default numbering is unsatisfactory.  The drive
aliases will be created as symbolic links in /dev/disk/by-vdev.

The only currently supported topologies are sas_direct and sas_switch:

o  sas_direct - a channel is uniquely identified by a PCI slot and a
   HBA port

o  sas_switch - a channel is uniquely identified by a SAS switch port

A multipath mode is supported in which dm-mpath devices are handled by
examining the first running component disk, as reported by 'multipath
-l'.  In multipath mode the configuration file should contain a
channel definition with the same name for each path to a given
enclosure.

vdev_id can replace the existing zpool_id script on systems where the
storage topology conforms to sas_direct or sas_switch.  The script
could be extended to support other topologies as well.  The advantage
of vdev_id is that it is driven by a single static input file that can
be shared across multiple nodes having a common storage toplogy.
zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per
node and a separate slot-mapping file.  However, zpool_id provides the
flexibility of using any device names that show up in
/dev/disk/by-path, so it may still be needed on some systems.

vdev_id's functionality subsumes that of the sas_switch_id script, and
it is unlikely that anyone is using it, so sas_switch_id is removed.

Finally, /dev/disk/by-vdev is added to the list of directories that
'zpool import' will scan.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #713
2012-06-01 08:55:14 -07:00
Brian Behlendorf b39d3b9f7b Linux 3.3 compat, iops->create()/mkdir()/mknod()
The mode argument of iops->create()/mkdir()/mknod() was changed from
an 'int' to a 'umode_t'.  To prevent a compiler warning an autoconf
check was added to detect the API change and then correctly set a
zpl_umode_t typedef.  There is no functional change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #701
2012-04-30 12:52:38 -07:00
Richard Lowe ad60af8e1b Illumos #2067: uninitialized variables in zfs(1M) may make snapshots undestroyable
Reviewed by: Joshua M. Clulow <josh@sysmgr.org>
Reviewed by: Milan Jurik <milan.jurik@xylab.cz>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
	https://www.illumos.org/issues/2067

Ported by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-04-27 15:17:23 -07:00
Frederik Wessels 95bcd51ecc Illumos #1946: incorrect formatting when listing output of multiple pools with zpool iostat -v
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Joshua M. Clulow <josh@sysmgr.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

Reference to Illumos issue:
  https://www.illumos.org/issues/1946

Ported by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-04-27 15:15:37 -07:00
Mike Harsch 187632dcef Illumos #952: separate intent logs should be obvious in 'zpool iostat' output
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>

Refererce to Illumos issue:
  https://www.illumos.org/issues/952

Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #607
2012-04-27 15:12:43 -07:00
P.SCH cf81b00a73 ZFS list snapshot property alias
Add support for the `zfs list -t snap` alias which is available under
Oracle Solaris 11.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #640
2012-04-11 12:02:46 -07:00
P.SCH 10b75496bb ZFS snapshot alias
For consistency, and because it's handy, add the 'zfs snap' alias which
was introduced by Oracle Solaris 11.  This includes an update to the
man page to reflect all the available alias (snap, umount, and recv).

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #640
2012-04-11 12:02:31 -07:00
Richard Yao 847de12271 Print human readable error message for ENOENT
A cryptic error code is printed when mounting a legacy dataset to a
non-existent mountpoint. This patch changes this behavior to print
"mount point '%s' does not exist", which is similar to the error
message printed when mounting procfs.

The single quotes were added to be consistent with the existing EBUSY
error message, which is the only difference between this error message
and the one that is printed when the same condition occurs when mounting
procfs.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #633
2012-04-03 10:24:34 -07:00
Craig Sanders 9fc60702c6 Remove hard-coded 80 column output
When stdout is detected to be a tty use the number of columns
specified by the terminal.  If that fails fall back to a default
80 column width.  In the non-tty case allow for 999 column lines.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-27 15:01:08 -07:00
Brian Behlendorf f47e1351db Fix executable permissions
Caught by lint, this permission change was accidentally introduced
by commit 42cb3819f1.  Restore the
correct permissions and while I'm at it add a missing whack-bang
to config/ltmain.sh.

  lint: executable-not-elf-or-script: zpool_main.c zfs_main.c

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #620
2012-03-26 11:52:44 -07:00
Brian Behlendorf 1c5de20ae2 Add --enable-debug-dmu-tx configure option
Allow rigorous (and expensive) tx validation to be enabled/disabled
indepentantly from the standard zfs debugging.  When enabled these
checks ensure that all txs are constructed properly and that a dbuf
is never dirtied without taking the correct tx hold.

This checking is particularly helpful when adding new dmu consumers
like Lustre.  However, for established consumers such as the zpl
with no known outstanding tx construction problems this is just
overhead.

--enable-debug-dmu-tx  - Enable/disable validation of each tx as
--disable-debug-dmu-tx   it is constructed.  By default validation
                         is disabled due to performance concerns.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-23 12:25:17 -07:00
Brian Behlendorf ebe7e575ea Add .zfs control directory
Add support for the .zfs control directory.  This was accomplished
by leveraging as much of the existing ZFS infrastructure as posible
and updating it for Linux as required.  The bulk of the core
functionality is now all there with the following limitations.

*) The .zfs/snapshot directory automount support requires a 2.6.37
   or newer kernel.  The exception is RHEL6.2 which has backported
   the d_automount patches.

*) Creating/destroying/renaming snapshots with mkdir/rmdir/mv
   in the .zfs/snapshot directory works as expected.  However,
   this functionality is only available to root until zfs
   delegations are finished.

      * mkdir - create a snapshot
      * rmdir - destroy a snapshot
      * mv    - rename a snapshot

The following issues are known defeciences, but we expect them to
be addressed by future commits.

*) Add automount support for kernels older the 2.6.37.  This should
   be possible using follow_link() which is what Linux did before.

*) Accessing the .zfs/snapshot directory via NFS is not yet possible.
   The majority of the ground work for this is complete.  However,
   finishing this work will require resolving some lingering
   integration issues with the Linux NFS kernel server.

*) The .zfs/shares directory exists but no futher smb functionality
   has yet been implemented.

Contributions-by: Rohan Puri <rohan.puri15@gmail.com>
Contributiobs-by: Andrew Barnes <barnes333@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #173
2012-03-22 13:03:47 -07:00
Gregor Kopka 42cb3819f1 Use stderr for 'no pools/datasets available' error
The 'zfs list' and 'zpool list' commands output the message
'no datasets/pools available' to stdout.  This should go to
stderr and only the available datasets/pools should go to
stdout.  Returning nothing to stdout is expected behavior
when there is nothing to list.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #581
2012-03-15 10:24:00 -07:00
Brian Behlendorf 4b787d75c8 Cleanly support debug packages
Allow a source rpm to be rebuilt with debugging enabled.  This
avoids the need to have to manually modify the spec file.  By
default debugging is still largely disabled.  To enable specific
debugging features use the following options with rpmbuild.

  '--with debug'               - Enables ASSERTs

  # For example:
  $ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm

Additionally, ZFS_CONFIG has been added to zfs_config.h for
packages which build against these headers.  This is critical
to ensure both zfs and the dependant package are using the same
prototype and structure definitions.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-27 14:08:17 -08:00
Ned Bass 3a4f6caf08 Return success from check_slice() if device doesn't exist
When creating a new pool, make_root_vdev() calls check_in_use() to
ensure that none of the consituent disks are in use.  If the disk
contains a valid vdev label it is read to retrieve the list of its
child vdevs and these are checked recursively.  However, the
partitions stored in the vdev label my no longer exist, for example
if the partition table has since been altered.  In any such case we
would want the pool creation to proceed, so this change removes the
check from check_slice() that returns an error if the device doesn't
exist.  As an added assurance, the Solaris implementation also
returns sucess on ENOENT.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-27 08:52:38 -08:00
Etienne Dechamps 30930fba21 Add support for DISCARD to ZVOLs.
DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning.
It allows ZVOL clients to discard (unmap, trim) block ranges from
a ZVOL, thus optimizing disk space usage by allowing a ZVOL to
shrink instead of just grow.

We can't use zfs_space() or zfs_freesp() here, since these functions
only work on regular files, not volumes. Fortunately we can use the
low-level function dmu_free_long_range() which does exactly what we
want.

Currently the discard operation is not added to the log. That's not
a big deal since losing discard requests cannot result in data
corruption. It would however result in disk space usage higher than
it should be. Thus adding log support to zvol_discard() is probably
a good idea for a future improvement.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-09 16:19:38 -08:00
Etienne Dechamps cb2d19010d Support the fallocate() file operation.
Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is
supported, since it's the only one that matches the behavior of
zfs_space(). This makes it pretty much useless in its current
form, but it's a start.

To support other flag combinations we would need to modify
zfs_space() to make it more flexible, or emulate the desired
functionality in zpl_fallocate().

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #334
2012-02-09 16:19:32 -08:00
Etienne Dechamps 34037afe24 Improve ZVOL queue behavior.
The Linux block device queue subsystem exposes a number of configurable
settings described in Linux block/blk-settings.c. The defaults for these
settings are tuned for hard drives, and are not optimized for ZVOLs. Proper
configuration of these options would allow upper layers (I/O scheduler) to
take better decisions about write merging and ordering.

Detailed rationale:

 - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to
   handle writes of any size, so there's no reason to impose a limit. Let the
   upper layer decide.

 - max_segments and max_segment_size are set to unlimited. zvol_write() will
   copy the requests' contents into a dbuf anyway, so the number and size of
   the segments are irrelevant. Let the upper layer decide.

 - physical_block_size and io_opt are set to the ZVOL's block size. This
   has the potential to somewhat alleviate issue #361 for ZVOLs, by warning
   the upper layers that writes smaller than the volume's block size will be
   slow.

 - The NONROT flag is set to indicate this isn't a rotational device.
   Although the backing zpool might be composed of rotational devices, the
   resulting ZVOL often doesn't exhibit the same behavior due to the COW
   mechanisms used by ZFS. Setting this flag will prevent upper layers from
   making useless decisions (such as reordering writes) based on incorrect
   assumptions about the behavior of the ZVOL.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-07 16:23:06 -08:00
Etienne Dechamps b18019d2d8 Fix synchronicity for ZVOLs.
zvol_write() assumes that the write request must be written to stable storage
if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed,
"sync" does *not* mean what we think it means in the context of the Linux
block layer. This is well explained in linux/fs.h:

    WRITE:       A normal async write. Device will be plugged.
    WRITE_SYNC:  Synchronous write. Identical to WRITE, but passes down
                 the hint that someone will be waiting on this IO
                 shortly.
    WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush.
    WRITE_FUA:   Like WRITE_SYNC but data is guaranteed to be on
                 non-volatile media on completion.

In other words, SYNC does not *mean* that the write must be on stable storage
on completion. It just means that someone is waiting on us to complete the
write request. Thus triggering a ZIL commit for each SYNC write request on a
ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL
users have no way to express that they actually want data to be written to
stable storage, which means the ZIL is broken for ZVOLs.

The request for stable storage is expressed by the FUA flag, so we must
commit the ZIL after the write if the FUA flag is set. In addition, we must
commit the ZIL before the write if the FLUSH flag is set.

Also, we must inform the block layer that we actually support FLUSH and FUA.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-07 16:23:06 -08:00
Brian Behlendorf 47621f3d76 Linux 3.3 compat, sops->show_options()
The second argument of sops->show_options() was changed from a
'struct vfsmount *' to a 'struct dentry *'.  Add an autoconf check
to detect the API change and then conditionally define the expected
interface.  In either case we are only interested in the zfs_sb_t.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #549
2012-02-03 10:02:01 -08:00
Darik Horn 750562833f Combine libraries: spl, avl, efi, share, unicode.
These libraries, which are an artifact of the ZoL development
process, conflict with packages that are already in distribution:

  * libspl: SPL Programming Language
  * libavl: AVL for Linux
  * libefi: GRUB

And these libraries are potential conflicts:

  * libshare: the Linux Mount Manager
  * libunicode: Perl and Python

Recompose these five ZoL components into the four libraries that are
conventionally provided by Solaris and FreeBSD systems:

  + libnvpair
  + libuutil
  + libzpool
  + libzfs

This change resolves the name conflict, makes ZoL more compatible
with existing software that uses autotools to detect ZFS, and allows
pkg-zfs to better reflect the official Debian kFreeBSD packaging.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #430
2012-01-17 15:19:50 -08:00
Suman Chakravartula e18be9a637 Add overlay(-O) mount option support
Linux supports mounting over non-empty directories by default.
In Solaris this is not the case and -O option is required for
zfs mount to mount a zfs filesystem over a non-empty directory.

For compatibility, I've added support for -O option to mount
zfs filesystems over non-empty directories if the user wants
to, just like in Solaris.

I've defined MS_OVERLAY to record it in the flags variable if
the -O option is supplied.  The flags variable passes through
a few functions and its checked before performing the empty
directory check in zfs_mount function.  If -O is given, the
check is not performed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #473
2012-01-12 15:49:38 -08:00
Darik Horn b97f368d04 Avoid using awk in the zpool_id script.
Some implementations of `awk` incorrectly parse the \< and \> regex
symbols, so use a `while read` loop and regular globbing instead.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #259
2012-01-11 11:56:56 -08:00
Brian Behlendorf ab26409db7 Linux 3.1 compat, super_block->s_shrink
The Linux 3.1 kernel has introduced the concept of per-filesystem
shrinkers which are directly assoicated with a super block.  Prior
to this change there was one shared global shrinker.

The zfs code relied on being able to call the global shrinker when
the arc_meta_limit was exceeded.  This would cause the VFS to drop
references on a fraction of the dentries in the dcache.  The ARC
could then safely reclaim the memory used by these entries and
honor the arc_meta_limit.  Unfortunately, when per-filesystem
shrinkers were added the old interfaces were made unavailable.

This change adds support to use the new per-filesystem shrinker
interface so we can continue to honor the arc_meta_limit.  The
major benefit of the new interface is that we can now target
only the zfs filesystem for dentry and inode pruning.  Thus we
can minimize any impact on the caching of other filesystems.

In the context of making this change several other important
issues related to managing the ARC were addressed, they include:

* The dnlc_reduce_cache() function which was called by the ARC
to drop dentries for the Posix layer was replaced with a generic
zfs_prune_t callback.  The ZPL layer now registers a callback to
drop these dentries removing a layering violation which dates
back to the Solaris code.  This callback can also be used by
other ARC consumers such as Lustre.

  arc_add_prune_callback()
  arc_remove_prune_callback()

* The arc_reduce_dnlc_percent module option has been changed to
arc_meta_prune for clarity.  The dnlc functions are specific to
Solaris's VFS and have already been largely eliminated already.
The replacement tunable now represents the number of bytes the
prune callback will request when invoked.

* Less aggressively invoke the prune callback.  We used to call
this whenever we exceeded the arc_meta_limit however that's not
strictly correct since it results in over zeleous reclaim of
dentries and inodes.  It is now only called once the arc_meta_limit
is exceeded and every effort has been made to evict other data from
the ARC cache.

* More promptly manage exceeding the arc_meta_limit.  When reading
meta data in to the cache if a buffer was unable to be recycled
notify the arc_reclaim thread to invoke the required prune.

* Added arcstat_prune kstat which is incremented when the ARC
is forced to request that a consumer prune its cache.  Remember
this will only occur when the ARC has no other choice.  If it
can evict buffers safely without invoking the prune callback
it will.

* This change is also expected to resolve the unexpect collapses
of the ARC cache.  This would occur because when exceeded just the
arc_meta_limit reclaim presure would be excerted on the arc_c
value via arc_shrink().  This effectively shrunk the entire cache
when really we just needed to reclaim meta data.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #466
Closes #292
2012-01-11 11:46:02 -08:00
Darik Horn afd7da0ce7 Add LIBSELINUX to mount_zfs_LDFLAGS.
Regenerating the autotools configuration on Debian and Ubuntu systems
causes compilation to fail with this error message:

  cmd/mount_zfs/../../cmd/mount_zfs/mount_zfs.c:403:
    undefined reference to `is_selinux_enabled'

In the automake template, set "mount_zfs_LDFLAGS = ... $(LIBSELINUX)"
so that the /sbin/mount.zfs utility is linked to libselinux.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-12-16 20:04:42 -08:00
Darik Horn 28eb9213d8 Linux 3.2 compat: set_nlink()
Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit

  SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170

Use the new set_nlink() kernel function instead.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #462
2011-12-16 20:02:52 -08:00
Prakash Surya 6ba3b44614 Add make rule for building Arch Linux packages
Added the necessary build infrastructure for building packages
compatible with the Arch Linux distribution. As such, one can now run:

    $ ./configure
    $ make pkg     # Alternatively, one can run 'make arch' as well

on the Arch Linux machine to create two binary packages compatible with
the pacman package manager, one for the zfs userland utilities and
another for the zfs kernel modules. The new packages can then be
installed by running:

    # pacman -U $package.pkg.tar.xz

In addition, source-only packages suitable for an Arch Linux chroot
environment or remote builder can also be build using the 'sarch' make
rule.

NOTE: Since the source dist tarball is created on the fly from the head
of the build tree, it's MD5 hash signature will be continually influx.
As a result, the md5sum variable was intentionally omitted from the
PKGBUILD files, and the '--skipinteg' makepkg option is used. This may
or may not have any serious security implications, as the source tarball
is not being downloaded from an outside source.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #491
2011-12-14 19:14:23 -08:00
Darik Horn db7c1771da Demote the whackbang in the zpool_id script.
The zpool_id script is posixly correct and does not use bash
features, so change its whackbang from /bin/bash to /bin/sh.

Debian policy also stipulates that system scripts be dash compatible.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-12-05 09:48:18 -08:00
Darik Horn 87193e2b61 Demote egrep to grep in the zpool_id script.
Direct invocation of GNU egrep is deprecated by its man page, and the
its argument in the zpool_id script is not an extended expression.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-12-05 09:48:01 -08:00
Darik Horn 04bf5ecc1f Quote variables in the zpool_id script.
For consistency and safety, quote all variables in the zpool_id
script. This accomodates a `-c CONFIG` parameter value with
whitespace in the path name.

Also fix a typo in the usage synopsis for `-h`.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #439
2011-12-05 09:47:03 -08:00
Darik Horn 9c8254f6f9 Support path_id changes in udev 174.
The /lib/udev/path_id helper became a builtin command in the udev 174
release, so test whether path_id is external in the zpool_id script.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #429
2011-12-05 09:46:48 -08:00
Brian Behlendorf 5547c2f1bf Simplify BDI integration
Update the code to use the bdi_setup_and_register() helper to
simplify the bdi integration code.  The updated code now just
registers the bdi during mount and destroys it during unmount.

The only complication is that for 2.6.32 - 2.6.33 kernels the
helper wasn't available so in these cases the zfs code must
provide it.  Luckily the bdi_setup_and_register() function
is trivial.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #367
2011-11-08 10:19:03 -08:00
Darik Horn 3cee2262a6 Change sun.com URLs to zfsonlinux.org
ZFS contains error messages that point to the defunct www.sun.com
domain, which is currently offline.  Change these error messages
to use the zfsonlinux.org mirror instead.

This commit depends on:

  zfsonlinux/zfsonlinux.github.com@8e10ead3dc

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-10-24 09:52:21 -07:00
Brian Behlendorf 86f35f34f4 Export symbols for the VFS API
Export all symbols already marked extern in the zfs_vfsops.h
header.  Several non-static symbols have also been added to
the header and exportewd.  This allows external modules to
more easily create and manipulate properly created ZFS
filesystem type datasets.

Rename zfsvfs_teardown() to zfs_sb_teardown and export it.
This is done simply for consistency with the rest of the code
base.  All other zfsvfs_* functions have already been renamed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-10-11 10:25:59 -07:00
Brian Behlendorf c70602f1ea Fix uninitialized varible in zfs_do_userspace()
When compiling under Debian Lenny with gcc version 4.3.2
(Debian 4.3.2-1.1) the following warning occurs.  To quiet
the warning initialize 'error' to zero.  Newer versions of
gcc correctly determine that this uninitialized varible is
impossible because ZFS_NUM_USERQUOTA_PROPS is known to be
greater than zero.

  cmd/zfs/zfs_main.c:2377: warning: "error" may be
  used uninitialized in this function

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-27 16:56:38 -07:00
Brian Behlendorf 4c069d3494 Fixed uninitialized variable
This warning was accidentally introduced by commit
b7936d5c2337bc976ac831c1c38de563844c36b.  The fix is to
simply initialize the variable to ZFS_DELEG_WHO_UNKNOWN.

  cmd/zfs/zfs_main.c:4460:25: warning: 'who_type' may be
  used uninitialized in this function

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-19 16:26:06 -07:00
Brian Behlendorf 29b35200a7 Fix missing format arguments
These warnings were accidentally introduced by commit
b7936d5c2337bc976ac831c1c38de563844c36b.  The fix is to
simply add the missing format specifier.

  cmd/zfs/zfs_main.c:4565: warning: format not a string
  literal and no format arguments

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-19 15:16:34 -07:00
Brian Behlendorf b740d602bd Disable zfs /etc/mtab updates
Completely disable the zfs binary from attempting to directly update
/etc/mtab.  The Linux port relies entirely on the mount.zfs helper
to safely update /etc/mtab.  If we left the /etc/mtab updates to
the zfs binary then they could race with concurrent non-zfs mounts.
Routing everything through the system mount command ensures the
/etc/mtab updates are locked properly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #329
2011-08-19 11:53:01 -07:00
Brian Behlendorf de0a1c099b Autogen refresh for udev changes
Run autogen.sh using the same autotools versions as upstream:

 * autoconf-2.63
 * automake-1.11.1
 * libtool-2.2.6b
2011-08-08 16:30:27 -07:00
Kyle Fuller 12d06bac9b Move udev rules from /etc/udev to /lib/udev
This change moves the default install location for the zfs udev
rules from /etc/udev/ to /lib/udev/.  The correct convention is
for rules provided by a package to be installed in /lib/udev/.
The /etc/udev/ directory is reserved for custom rules or local
overrides.

Additionally, this patch cleans up some abuse of the bindir install
location by adding a udevdir and udevruledir install directories.
This allows us to revert to the default bin install location.  The
udev install directories can be set with the following new options.

  --with-udevdir=DIR      install udev helpers [EPREFIX/lib/udev]
  --with-udevruledir=DIR  install udev rules [UDEVDIR/rules.d]

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #356
2011-08-08 16:21:10 -07:00
Brian Behlendorf 76659dc110 Add backing_device_info per-filesystem
For a long time now the kernel has been moving away from using the
pdflush daemon to write 'old' dirty pages to disk.  The primary reason
for this is because the pdflush daemon is single threaded and can be
a limiting factor for performance.  Since pdflush sequentially walks
the dirty inode list for each super block any delay in processing can
slow down dirty page writeback for all filesystems.

The replacement for pdflush is called bdi (backing device info).  The
bdi system involves creating a per-filesystem control structure each
with its own private sets of queues to manage writeback.  The advantage
is greater parallelism which improves performance and prevents a single
filesystem from slowing writeback to the others.

For a long time both systems co-existed in the kernel so it wasn't
strictly required to implement the bdi scheme.  However, as of
Linux 2.6.36 kernels the pdflush functionality has been retired.

Since ZFS already bypasses the page cache for most I/O this is only
an issue for mmap(2) writes which must go through the page cache.
Even then adding this missing support for newer kernels was overlooked
because there are other mechanisms which can trigger writeback.

However, there is one critical case where not implementing the bdi
functionality can cause problems.  If an application handles a page
fault it can enter the balance_dirty_pages() callpath.  This will
result in the application hanging until the number of dirty pages in
the system drops below the dirty ratio.

Without a registered backing_device_info for the filesystem the
dirty pages will not get written out.  Thus the application will hang.
As mentioned above this was less of an issue with older kernels because
pdflush would eventually write out the dirty pages.

This change adds a backing_device_info structure to the zfs_sb_t
which is already allocated per-super block.  It is then registered
when the filesystem mounted and unregistered on unmount.  It will
not be registered for mounted snapshots which are read-only.  This
change will result in flush-<pool> thread being dynamically created
and destroyed per-mounted filesystem for writeback.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #174
2011-08-04 13:37:38 -07:00
Alexander Stetsenko 0b7936d5c2 Illumos #278: get rid zfs of python and pyzfs dependencies
Remove all python and pyzfs dependencies for consistency and
to ensure full functionality even in a mimimalist environment.

Reviewed by: gordon.w.ross@gmail.com
Reviewed by: trisk@opensolaris.org
Reviewed by: alexander.r.eremin@gmail.com
Reviewed by: jerry.jelinek@joyent.com
Approved by: garrett@nexenta.com

References to Illumos issue and patch:
- https://www.illumos.org/issues/278
- https://github.com/illumos/illumos-gate/commit/1af68beac3

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
Issue #160

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-01 12:09:36 -07:00
Eric Schrock 3e31d2b080 Illumos #883: ZIL reuse during remount corruption
Moving the zil_free() cleanup to zil_close() prevents this
problem from occurring in the first place.  There is a very
good description of the issue and fix in Illumus #883.

Reviewed by: Matt Ahrens <Matt.Ahrens@delphix.com>
Reviewed by: Adam Leventhal <Adam.Leventhal@delphix.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Reivewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References to Illumos issue and patch:
- https://www.illumos.org/issues/883
- https://github.com/illumos/illumos-gate/commit/c9ba2a43cb

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
2011-08-01 12:09:11 -07:00
George Wilson 6d974228ef Illumos #1051: zfs should handle imbalanced luns
Today zfs tries to allocate blocks evenly across all devices.
This means when devices are imbalanced zfs will use lots of
CPU searching for space on devices which tend to be pretty
full.  It should instead fail quickly on the full LUNs and
move onto devices which have more availability.

Reviewed by: Eric Schrock <Eric.Schrock@delphix.com>
Reviewed by: Matt Ahrens <Matt.Ahrens@delphix.com>
Reviewed by: Adam Leventhal <Adam.Leventhal@delphix.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>

References to Illumos issue and patch:
- https://www.illumos.org/issues/510
- https://github.com/illumos/illumos-gate/commit/5ead3ed965

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
2011-08-01 12:09:11 -07:00
Shampavman bb939d1085 Illumos #510: 'zfs get' enhancement - mountpoint as an argument
The 'zfs get' command should be able to deal with mountpoint
as an argument.  It already works with 'zfs list' command:

  # zfs list /export/home/estibi
  NAME                       USED  AVAIL  REFER  MOUNTPOINT
  rpool/export/home/estibi  1.14G  3.86G  1.14G  /export/home/estibi

but it fails with 'zfs get':

  # zfs get all /export/home/estibi
  cannot open '/export/home/estibi': invalid dataset name

Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Deano <deano@rattie.demon.co.uk>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>

References to Illumos issue and patch:
- https://www.illumos.org/issues/510
- https://github.com/illumos/illumos-gate/commit/5ead3ed965

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
2011-08-01 12:09:11 -07:00
Kyle Fuller 615ab66d18 Provide a rc.d script for archlinux
Unlike most other Linux distributions archlinux installs its
init scripts in /etc/rc.d insead of /etc/init.d.  This commit
provides an archlinux rc.d script for zfs and extends the
build infrastructure to ensure it get's installed in the
correct place.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #322
2011-07-11 14:12:23 -07:00
Brian Behlendorf e0f86c9862 Update 'zfs send' documentation
The -D and -p options were missing from the manpage.  This commit
adds documentation for these features.

Closes #311
2011-07-08 12:16:09 -07:00
Brian Behlendorf 341b5f1d4c Update ztest paths
Unfortunately, ztest is hard coded to export the zdb utility to
be installed in a certain location.  When the packaging was updated
to install zdb in /sbin/ ztest was broken.  To fix this I'm updating
ztest to check both common install paths.
2011-07-06 12:30:09 -07:00
Prasad Joshi 5a52105925 Use consistent error message in zpool sub-command
The zpool sub-commands like iostat, list, and status should
display consistent message when a given pool is unavailable or
no pool is present.  This change unifies the default behavior
as follows:

  root@prasad:~# ./zpool list 1 2
  no pools available
  no pools available

  root@prasad:~# ./zpool iostat  1 2
  no pools available
  no pools available

  root@prasad:~# ./zpool status 1 2
  no pools available
  no pools available

  root@prasad:~# ./zpool list tan 1 2
  cannot open 'tan': no such pool

  root@prasad:~# ./zpool iostat tan 1 2
  cannot open 'tan': no such pool

  root@prasad:~# ./zpool status tan 1 2
  cannot open 'tan': no such pool

Reported-by: Rajshree Thorat <rthorat@stec-inc.com>
Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

Closes #306
2011-07-04 19:57:01 -07:00
Brian Behlendorf 2cf7f52bc4 Linux compat 2.6.39: mount_nodev()
The .get_sb callback has been replaced by a .mount callback
in the file_system_type structure.  When using the new
interface the caller must now use the mount_nodev() helper.

Unfortunately, the new interface no longer passes the vfsmount
down to the zfs layers.  This poses a problem for the existing
implementation because we currently save this pointer in the
super block for latter use.  It provides our only entry point
in to the namespace layer for manipulating certain mount options.

This needed to be done originally to allow commands like
'zfs set atime=off tank' to work properly.  It also allowed me
to keep more of the original Solaris code unmodified.  Under
Solaris there is a 1-to-1 mapping between a mount point and a
file system so this is a fairly natural thing to do.  However,
under Linux they many be multiple entries in the namespace
which reference the same filesystem.  Thus keeping a back
reference from the filesystem to the namespace is complicated.

Rather than introduce some ugly hack to get the vfsmount and
continue as before.  I'm leveraging this API change to update
the ZFS code to do things in a more natural way for Linux.
This has the upside that is resolves the compatibility issue
for the long term and fixes several other minor bugs which
have been reported.

This commit updates the code to remove this vfsmount back
reference entirely.  All modifications to filesystem mount
options are now passed in to the kernel via a '-o remount'.
This is the expected Linux mechanism and allows the namespace
to properly handle any options which apply to it before passing
them on to the file system itself.

Aside from fixing the compatibility issue, removing the
vfsmount has had the benefit of simplifying the code.  This
change which fairly involved has turned out nicely.

Closes #246
Closes #217
Closes #187
Closes #248
Closes #231
2011-07-01 13:36:39 -07:00
Brian Behlendorf 5c03efc379 Linux compat 2.6.39: security_inode_init_security()
The security_inode_init_security() function now takes an additional
qstr argument which must be passed in from the dentry if available.
Passing a NULL is safe when no qstr is available the relevant
security checks will just be skipped.

Closes #246
Closes #217
Closes #187
2011-07-01 12:40:08 -07:00
Prasad Joshi b312979252 Tear down and flush the mmap region
The inode eviction should unmap the pages associated with the inode.
These pages should also be flushed to disk to avoid the data loss.
Therefore, use truncate_setsize() in evict_inode() to release the
pagecache.

The API truncate_setsize() was added in 2.6.35 kernel. To ensure
compatibility with the old kernel, the patch defines its own
truncate_setsize function.

Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Closes #255
2011-06-27 09:59:19 -07:00
Ned A. Bass 560bcf9d14 Multipath device manageability improvements
Update udev helper scripts to deal with device-mapper devices created
by multipathd.  These enhancements are targeted at a particular
storage network topology under evaluation at LLNL consisting of two
SAS switches providing redundant connectivity between multiple server
nodes and disk enclosures.

The key to making these systems manageable is to create shortnames for
each disk that conveys its physical location in a drawer.  In a
direct-attached topology we infer a disk's enclosure from the PCI bus
number and HBA port number in the by-path name provided by udev.  In a
switched topology, however, multiple drawers are accessed via a single
HBA port.  We therefore resort to assigning drawer identifiers based
on which switch port a drive's enclosure is connected to.  This
information is available from sysfs.

Add options to zpool_layout to generate an /etc/zfs/zdev.conf using
symbolic links in /dev/disk/by-id of the form
<label>-<UUID>-switch-port:<X>-slot:<Y>.  <label> is a string that
depends on the subsystem that created the link and defaults to
"dm-uuid-mpath" (this prefix is used by multipathd).  <UUID> is a
unique identifier for the disk typically obtained from the scsi_id
program, and <X> and <Y> denote the switch port and disk slot numbers,
respectively.

Add a callout script sas_switch_id for use by multipathd to help
create symlinks of the form described above.  Update zpool_id and the
udev zpool rules file to handle both multipath devices and
conventional drives.
2011-06-23 10:46:06 -07:00
Christian Kohlschütter df30f56639 Add "ashift" property to zpool create
Some disks with internal sectors larger than 512 bytes (e.g., 4k) can
suffer from bad write performance when ashift is not configured
correctly.  This is caused by the disk not reporting its actual sector
size, but a sector size of 512 bytes.  The drive may behave this way
for compatibility reasons.  For example, the WDC WD20EARS disks are
known to exhibit this behavior.

When creating a zpool, ZFS takes that wrong sector size and sets the
"ashift" property accordingly (to 9: 1<<9=512), whereas it should be
set to 12 for 4k sectors (1<<12=4096).

This patch allows an adminstrator to manual specify the known correct
ashift size at 'zpool create' time.  This can significantly improve
performance in certain cases.  However, it will have an impact on your
total pool capacity.  See the updated ashift property description
in the zpool.8 man page for additional details.

Valid values for the ashift property range from 9 to 17 (512B-128KB).
Additionally, you may set the ashift to 0 if you wish to auto-detect
the sector size based on what the disk reports, this is the default
behavior.  The most common ashift values are 9 and 12.

  Example:
  zpool create -o ashift=12 tank raidz2 sda sdb sdc sdd

Closes #280

Original-patch-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-06-17 16:35:49 -07:00
Brian Behlendorf e130330a87 Handle /etc/mtab -> /proc/mounts symlink
Under Fedora 15 /etc/mtab is now a symlink to /proc/mounts by
default.  When /etc/mtab is a symlink the mount.zfs helper
should not update it.   There was code in place to handle this
case but it used stat() which traverses the link and then issues
the stat on /proc/mounts.  We need to use lstat() to prevent the
link traversal and instead stat /etc/mtab.

Closes #270
2011-06-14 16:48:38 -07:00
Brian Behlendorf 2e08aedba4 Always check -Wno-unused-but-set-variable gcc support
The previous commit 8a7e1ceefa wasn't
quite right.  This check applies to both the user and kernel space
build and as such we must make sure it runs regardless of what
the --with-config option is set too.

For example, if --with-config=kernel then the autoconf test does
not run and we generate build warnings when compiling the kernel
packages.
2011-06-14 16:40:35 -07:00
Brian Behlendorf 8a7e1ceefa Check for -Wno-unused-but-set-variable gcc support
Gcc versions 4.3.2 and earlier do not support the compiler flag
-Wno-unused-but-set-variable.  This can lead to build failures
on older Linux platforms such as Debian Lenny.  Since this is
an optional build argument this changes add a new autoconf check
for the option.  If it is supported by the installed version of
gcc then it is used otherwise it is omited.

See commit's 12c1acde76 and
79713039a2 for the reason the
-Wno-unused-but-set-variable options was originally added.
2011-06-14 14:43:22 -07:00
Brian Behlendorf 4804b739e1 Default to internal 'zfs userspace' implementation
We will never bring over the pyzfs.py helper script from Solaris
to Linux.  Instead the missing functionality will be directly
integrated in to the zfs commands and libraries.  To avoid
confusion remove the warning about the missing pyzfs.py utility
and simply use the default internal support.

The Illumous developers are of the same mind and have proposed an
initial patch to do this which has been integrated in to the 'allow'
development branch.  After some additional testing this code
can be merged in to master as the right long term solution.
2011-05-20 10:25:41 -07:00
Brian Behlendorf 6ee44e32be Fix awk usage
The zpool_id and zpool_layout helper scripts have been updated to
use the more common /usr/bin/awk symlink.  On Fedora/Redhat systems
there are both /bin/awk and /usr/bin/awk symlinks to your installed
version of awk.  On Debian/Ubuntu systems only the /usr/bin/awk
symlink exists.

Additionally, add the '\<' token to the beginning of the regex
pattern to prevent partial matches.  This pattern only appears to
work with gawk despite the mawk man page claiming to support this
extended regex.  Thus you will need to have gawk installed to use
these optional helper scripts.  A comment has been added to the
script to reflect this reality.
2011-05-06 10:16:04 -07:00
Brian Behlendorf 3613204cd7 Allow mounting of read-only snapshots
With the addition of the mount helper we accidentally regressed
the ability to manually mount snapshots.  This commit updates
the mount helper to expect the possibility of a ZFS_TYPE_SNAPSHOT.
All snapshot will be automatically treated as 'legacy' type mounts
so they can be mounted manually.
2011-05-05 10:13:38 -07:00
Brian Behlendorf df554c148e Fix 'zfs set volsize=N pool/dataset'
This change fixes a kernel panic which would occur when resizing
a dataset which was not open.  The objset_t stored in the
zvol_state_t will be set to NULL when the block device is closed.
To avoid this issue we pass the correct objset_t as the third arg.

The code has also been updated to correctly notify the kernel
when the block device capacity changes.  For 2.6.28 and newer
kernels the capacity change will be immediately detected.  For
earlier kernels the capacity change will be detected when the
device is next opened.  This is a known limitation of older
kernels.

Online ext3 resize test case passes on 2.6.28+ kernels:
$ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023
$ zpool create tank /tmp/zvol
$ zfs create -V 500M tank/zd0
$ mkfs.ext3 /dev/zd0
$ mkdir /mnt/zd0
$ mount /dev/zd0 /mnt/zd0
$ df -h /mnt/zd0
$ zfs set volsize=800M tank/zd0
$ resize2fs /dev/zd0
$ df -h /mnt/zd0

Original-patch-by: Fajar A. Nugraha <github@fajar.net>
Closes #68
Closes #84
2011-05-02 08:54:40 -07:00
Gunnar Beutner 055656d4f4 Implemented NFS export_operations.
Implemented the required NFS operations for exporting ZFS datasets
using the in-kernel NFS daemon.
2011-04-29 12:36:13 -07:00
Darik Horn 492b8e9e7b Use gethostid in the Linux convention.
Disable the gethostid() override for Solaris behavior because Linux systems
implement the POSIX standard in a way that allows a negative result.

Mask the gethostid() result to the lower four bytes, like coreutils does in
/usr/bin/hostid, to prevent junk bits or sign-extension on systems that have an
eight byte long type. This can cause a spurious hostid mismatch that prevents
zpool import on 64-bit systems.
2011-04-25 10:36:17 -05:00
Brian Behlendorf 12c1acde76 Set -Wno-unused-but-set-variable globally
As of gcc-4.6 the option -Wunused-but-set-variable is enabled by
default.  While this is a useful warning there are numerous places
in the ZFS code when a variable is set and then only checked in an
ASSERT().  To avoid having to update every instance of this in the
code we now set -Wno-unused-but-set-variable to suppress the warning.

Additionally, when building with --enable-debug and -Werror set these
warning also become fatal.  We can reevaluate the suppression of these
error at a later time if it becomes an issue.  For now we are basically
just reverting to the previous gcc behavior.
2011-04-19 10:44:10 -07:00
Brian Behlendorf 03514b0110 Fix gcc compiler warning, parse_option()
When compiling ZFS in user space gcc-4.6.0 correctly identifies
the variable 'value' as being set but never used.  This generates a
warning and a build failure when using --enable-debug.  Once again
this is correct but I'm reluctant to remove 'value' because we are
breaking the string in to name/value pairs.  While it is not used
now there's a good chance it will be soon and I'd rather not have
to reinvent this.  To suppress the warning with just as a VERIFY().
This was observed under Fedora 15.

  cmd/mount_zfs/mount_zfs.c: In function ‘parse_option’:
  cmd/mount_zfs/mount_zfs.c:112:21: error: variable ‘value’ set but not
  used [-Werror=unused-but-set-variable]
2011-04-19 09:04:51 -07:00
Manuel Amador (Rudd-O) 8610b52bd4 Added .gitignore for mount.zfs and zvol_id
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-07 10:28:38 -07:00
Ned Bass fa417e57a6 Call udevadm trigger more safely
Some udev hooks are not designed to be idempotent, so calling udevadm
trigger outside of the distribution's initialization scripts can have
unexpected (and potentially dangerous) side effects.  For example, the
system time may change or devices may appear multiple times.  See Ubuntu
launchpad bug 320200 and this mailing list post for more details:

https://lists.ubuntu.com/archives/ubuntu-devel/2009-January/027260.html

To avoid these problems we call udevadm trigger with --action=change
--subsystem-match=block.  The first argument tells udev just to refresh
devices, and make sure everything's as it should be.  The second
argument limits the scope to block devices, so devices belonging to
other subsystems cannot be affected.

This doesn't fix the problem on older udev implementations that don't
provide udevadm but instead have udevtrigger as a standalone program.
In this case the above options aren't available so there's no way to
call call udevtrigger safely.  But we can live with that since this
issue only exists in optional test and helper scripts, and most
zfs-on-linux users are running newer systems anyways.
2011-04-05 13:00:51 -07:00
Fajar A. Nugraha a5729f7b22 Fixes to enable zvol symlink creation
This commit fixes issue on
https://github.com/behlendorf/zfs/issues/#issue/172
Changes:
- update BLKZNAME to use _IOR instead of _IO.  Kernel 2.6.32 allows
read parameters (copy_to_user) with _IO, while newer kernels (tested
Archlinux's 2.6.37 kernel) enforces _IOR (which is correct)
- fix return code and message on error

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-24 11:48:18 -07:00