Enable additional test cases
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. Add O_EXCL to the in-use check to prevent the -f (force) option from working for mounted filesystems and improve the resulting error. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos -6ba1ce9allows raidz+mirror configs with similar redundancy. Updating the valid_args and forced_args cases. * zpool_create_008_pos - Disable overlapping partition portion. * zpool_create_011_neg - Fix to correctly create the extra partition. Modified zpool_vdev.c to use fstat64_blk() wrapper which includes the st_size even for block devices. * zpool_create_012_neg - Updated to properly find swap devices. * zpool_create_014_neg, zpool_create_015_neg - Updated to use swap_setup() and swap_cleanup() wrappers which do the right thing on Linux and Illumos. Removed '-n' option which succeeds under Linux due to differences in the in-use checks. * zpool_create_016_pos.ksh - Skipped test case isn't useful. * zpool_create_020_pos - Added missing / to cleanup() function. Remove cache file prior to test to ensure a clean environment and avoid false positives. * zpool_destroy_001_pos - Removed test case which creates a pool on a zvol. This is more likely to deadlock under Linux and has never been completely supported on any platform. * zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux. Mount point must not be busy in order to unmount them. * zfs_destroy_001_pos - Handle EBUSY error which can occur with volumes when racing with udev. * zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. The test could be modified to use loop-back devices but it would be preferable to use the test case as is for improved coverage. * zpool_export_004_pos - Updated test case to such that it doesn't depend on nested pools. Normal file vdev under /var/tmp are fine. * zpool_import_all_001_pos - Updated to skip partition 1, which is known as slice 2, on Illumos. This prevents overwriting the default TESTPOOL which was causing the failure. * zpool_import_002_pos, zpool_import_012_pos - No changes needed. * zpool_remove_003_pos - No changes needed * zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed by upstream OpenZFS commit3b7f360. * zpool_upgrade_007_pos - Disabled in test case due to known failure. Opened issue https://github.com/zfsonlinux/zfs/issues/6112 * zvol_misc_002_pos - Updated to to use ext2. * zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos, zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, these test case could be updated to use Linux's crash dump facility. * zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers. File creation switched from /tmp to /var/tmp. Enabled minimal useful tests for Linux, skip test cases which aren't applicable. Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #3484 Issue #5634 Issue #2437 Issue #5202 Issue #4034 Closes #6095
This commit is contained in:
Brian Behlendorf
GitHub
parent
4747a7d3d4
commit
8c54ddd33a
|
|
@ -364,13 +364,6 @@ check_file(const char *file, boolean_t force, boolean_t isspare)
|
|||
return (ret);
|
||||
}
|
||||
|
||||
static void
|
||||
check_error(int err)
|
||||
{
|
||||
(void) fprintf(stderr, gettext("warning: device in use checking "
|
||||
"failed: %s\n"), strerror(err));
|
||||
}
|
||||
|
||||
static int
|
||||
check_slice(const char *path, blkid_cache cache, int force, boolean_t isspare)
|
||||
{
|
||||
|
|
@ -428,8 +421,10 @@ check_disk(const char *path, blkid_cache cache, int force,
|
|||
if (!iswholedisk)
|
||||
return (check_slice(path, cache, force, isspare));
|
||||
|
||||
if ((fd = open(path, O_RDONLY|O_DIRECT)) < 0) {
|
||||
check_error(errno);
|
||||
if ((fd = open(path, O_RDONLY|O_DIRECT|O_EXCL)) < 0) {
|
||||
char *value = blkid_get_tag_value(cache, "TYPE", path);
|
||||
(void) fprintf(stderr, gettext("%s is in use and contains "
|
||||
"a %s filesystem.\n"), path, value ? value : "unknown");
|
||||
return (-1);
|
||||
}
|
||||
|
||||
|
|
@ -496,7 +491,8 @@ check_device(const char *path, boolean_t force,
|
|||
|
||||
error = blkid_get_cache(&cache, NULL);
|
||||
if (error != 0) {
|
||||
check_error(error);
|
||||
(void) fprintf(stderr, gettext("unable to access the blkid "
|
||||
"cache.\n"));
|
||||
return (-1);
|
||||
}
|
||||
|
||||
|
|
@ -919,7 +915,7 @@ get_replication(nvlist_t *nvroot, boolean_t fatal)
|
|||
* this device altogether.
|
||||
*/
|
||||
if ((fd = open(path, O_RDONLY)) >= 0) {
|
||||
err = fstat64(fd, &statbuf);
|
||||
err = fstat64_blk(fd, &statbuf);
|
||||
(void) close(fd);
|
||||
} else {
|
||||
err = stat64(path, &statbuf);
|
||||
|
|
|
|||
|
|
@ -223,6 +223,7 @@ constrain_path() {
|
|||
|
||||
# Exceptions
|
||||
ln -fs "$STF_PATH/awk" "$STF_PATH/nawk"
|
||||
ln -fs /sbin/fsck.ext2 "$STF_PATH/fsck"
|
||||
ln -fs /sbin/mkfs.ext2 "$STF_PATH/newfs"
|
||||
ln -fs "$STF_PATH/gzip" "$STF_PATH/compress"
|
||||
ln -fs "$STF_PATH/gunzip" "$STF_PATH/uncompress"
|
||||
|
|
|
|||
|
|
@ -219,40 +219,26 @@ tests = ['zfs_upgrade_001_pos', 'zfs_upgrade_002_pos', 'zfs_upgrade_003_pos',
|
|||
[tests/functional/cli_root/zpool]
|
||||
tests = ['zpool_001_neg', 'zpool_002_pos', 'zpool_003_pos']
|
||||
|
||||
# DISABLED:
|
||||
# zpool_add_004_pos - https://github.com/zfsonlinux/zfs/issues/3484
|
||||
# zpool_add_005_pos - no 'dumpadm' command.
|
||||
# zpool_add_006_pos - https://github.com/zfsonlinux/zfs/issues/3484
|
||||
[tests/functional/cli_root/zpool_add]
|
||||
tests = ['zpool_add_001_pos', 'zpool_add_002_pos', 'zpool_add_003_pos',
|
||||
'zpool_add_004_pos', 'zpool_add_005_pos', 'zpool_add_006_pos',
|
||||
'zpool_add_007_neg', 'zpool_add_008_neg', 'zpool_add_009_neg',
|
||||
'add-o_ashift', 'add_prop_ashift']
|
||||
|
||||
[tests/functional/cli_root/zpool_attach]
|
||||
tests = ['zpool_attach_001_neg', 'attach-o_ashift']
|
||||
|
||||
# DISABLED:
|
||||
# zpool_clear_001_pos - https://github.com/zfsonlinux/zfs/issues/5634
|
||||
[tests/functional/cli_root/zpool_clear]
|
||||
tests = ['zpool_clear_002_neg', 'zpool_clear_003_neg']
|
||||
tests = ['zpool_clear_001_pos', 'zpool_clear_002_neg', 'zpool_clear_003_neg']
|
||||
|
||||
# DISABLED:
|
||||
# zpool_create_001_pos - needs investigation
|
||||
# zpool_create_002_pos - needs investigation
|
||||
# zpool_create_004_pos - needs investigation
|
||||
# zpool_create_006_pos - https://github.com/zfsonlinux/zfs/issues/3484
|
||||
# zpool_create_008_pos - uses VTOC labels (?) and 'overlapping slices'
|
||||
# zpool_create_011_neg - tries to access /etc/vfstab etc
|
||||
# zpool_create_012_neg - swap devices
|
||||
# zpool_create_014_neg - swap devices
|
||||
# zpool_create_015_neg - swap devices
|
||||
# zpool_create_016_pos - no dumadm command.
|
||||
# zpool_create_020_pos - needs investigation
|
||||
[tests/functional/cli_root/zpool_create]
|
||||
tests = [
|
||||
'zpool_create_003_pos', 'zpool_create_005_pos', 'zpool_create_007_neg',
|
||||
'zpool_create_009_neg', 'zpool_create_010_neg', 'zpool_create_017_neg',
|
||||
'zpool_create_018_pos', 'zpool_create_019_pos',
|
||||
tests = ['zpool_create_001_pos', 'zpool_create_002_pos',
|
||||
'zpool_create_003_pos', 'zpool_create_004_pos', 'zpool_create_005_pos',
|
||||
'zpool_create_006_pos', 'zpool_create_007_neg', 'zpool_create_008_pos',
|
||||
'zpool_create_009_neg', 'zpool_create_010_neg', 'zpool_create_011_neg',
|
||||
'zpool_create_012_neg', 'zpool_create_014_neg',
|
||||
'zpool_create_015_neg', 'zpool_create_016_pos', 'zpool_create_017_neg',
|
||||
'zpool_create_018_pos', 'zpool_create_019_pos', 'zpool_create_020_pos',
|
||||
'zpool_create_021_pos', 'zpool_create_022_pos', 'zpool_create_023_neg',
|
||||
'zpool_create_024_pos',
|
||||
'zpool_create_features_001_pos', 'zpool_create_features_002_pos',
|
||||
|
|
@ -260,11 +246,8 @@ tests = [
|
|||
'zpool_create_features_005_pos',
|
||||
'create-o_ashift']
|
||||
|
||||
# DISABLED:
|
||||
# zpool_destroy_001_pos - needs investigation
|
||||
# zpool_destroy_002_pos - busy mountpoint behavior
|
||||
[tests/functional/cli_root/zpool_destroy]
|
||||
tests = [
|
||||
tests = ['zpool_destroy_001_pos', 'zpool_destroy_002_pos',
|
||||
'zpool_destroy_003_neg']
|
||||
pre =
|
||||
post =
|
||||
|
|
@ -272,17 +255,13 @@ post =
|
|||
[tests/functional/cli_root/zpool_detach]
|
||||
tests = ['zpool_detach_001_neg']
|
||||
|
||||
# DISABLED: Requires full FMA support in ZED
|
||||
# zpool_expand_001_pos - https://github.com/zfsonlinux/zfs/issues/2437
|
||||
# zpool_expand_003_pos - https://github.com/zfsonlinux/zfs/issues/2437
|
||||
[tests/functional/cli_root/zpool_expand]
|
||||
tests = ['zpool_expand_002_pos', 'zpool_expand_004_pos']
|
||||
tests = ['zpool_expand_001_pos', 'zpool_expand_002_pos',
|
||||
'zpool_expand_003_neg', 'zpool_expand_004_pos']
|
||||
|
||||
# DISABLED:
|
||||
# zpool_export_004_pos - https://github.com/zfsonlinux/zfs/issues/3484
|
||||
[tests/functional/cli_root/zpool_export]
|
||||
tests = ['zpool_export_001_pos', 'zpool_export_002_pos',
|
||||
'zpool_export_003_neg']
|
||||
'zpool_export_003_neg', 'zpool_export_004_pos']
|
||||
|
||||
[tests/functional/cli_root/zpool_get]
|
||||
tests = ['zpool_get_001_pos', 'zpool_get_002_pos', 'zpool_get_003_pos',
|
||||
|
|
@ -291,20 +270,16 @@ tests = ['zpool_get_001_pos', 'zpool_get_002_pos', 'zpool_get_003_pos',
|
|||
[tests/functional/cli_root/zpool_history]
|
||||
tests = ['zpool_history_001_neg', 'zpool_history_002_pos']
|
||||
|
||||
# DISABLED:
|
||||
# zpool_import_002_pos - https://github.com/zfsonlinux/zfs/issues/5202
|
||||
# zpool_import_012_pos - sharenfs issue
|
||||
# zpool_import_all_001_pos - partition issue
|
||||
[tests/functional/cli_root/zpool_import]
|
||||
tests = ['zpool_import_001_pos',
|
||||
tests = ['zpool_import_001_pos', 'zpool_import_002_pos',
|
||||
'zpool_import_003_pos', 'zpool_import_004_pos', 'zpool_import_005_pos',
|
||||
'zpool_import_006_pos', 'zpool_import_007_pos', 'zpool_import_008_pos',
|
||||
'zpool_import_009_neg', 'zpool_import_010_pos', 'zpool_import_011_neg',
|
||||
'zpool_import_013_neg', 'zpool_import_014_pos',
|
||||
'zpool_import_012_pos', 'zpool_import_013_neg', 'zpool_import_014_pos',
|
||||
'zpool_import_features_001_pos', 'zpool_import_features_002_neg',
|
||||
'zpool_import_features_003_pos','zpool_import_missing_001_pos',
|
||||
'zpool_import_missing_002_pos', 'zpool_import_missing_003_pos',
|
||||
'zpool_import_rename_001_pos']
|
||||
'zpool_import_rename_001_pos', 'zpool_import_all_001_pos']
|
||||
|
||||
[tests/functional/cli_root/zpool_labelclear]
|
||||
tests = ['zpool_labelclear_active', 'zpool_labelclear_exported']
|
||||
|
|
@ -317,10 +292,9 @@ tests = ['zpool_offline_001_pos', 'zpool_offline_002_neg']
|
|||
[tests/functional/cli_root/zpool_online]
|
||||
tests = ['zpool_online_001_pos', 'zpool_online_002_neg']
|
||||
|
||||
# DISABLED:
|
||||
# zpool_remove_003_pos - needs investigation
|
||||
[tests/functional/cli_root/zpool_remove]
|
||||
tests = ['zpool_remove_001_neg', 'zpool_remove_002_pos']
|
||||
tests = ['zpool_remove_001_neg', 'zpool_remove_002_pos',
|
||||
'zpool_remove_003_pos']
|
||||
|
||||
[tests/functional/cli_root/zpool_replace]
|
||||
tests = ['zpool_replace_001_neg', 'replace-o_ashift', 'replace_prop_ashift']
|
||||
|
|
@ -338,14 +312,11 @@ post =
|
|||
tests = ['zpool_status_001_pos', 'zpool_status_002_pos','zpool_status_003_pos']
|
||||
user =
|
||||
|
||||
# DISABLED:
|
||||
# zpool_upgrade_002_pos - https://github.com/zfsonlinux/zfs/issues/4034
|
||||
# zpool_upgrade_004_pos - https://github.com/zfsonlinux/zfs/issues/4034
|
||||
# zpool_upgrade_007_pos - needs investigation
|
||||
[tests/functional/cli_root/zpool_upgrade]
|
||||
tests = ['zpool_upgrade_001_pos',
|
||||
'zpool_upgrade_003_pos', 'zpool_upgrade_005_neg',
|
||||
'zpool_upgrade_006_neg', 'zpool_upgrade_008_pos',
|
||||
tests = ['zpool_upgrade_001_pos', 'zpool_upgrade_002_pos',
|
||||
'zpool_upgrade_003_pos', 'zpool_upgrade_004_pos',
|
||||
'zpool_upgrade_005_neg', 'zpool_upgrade_006_neg',
|
||||
'zpool_upgrade_007_pos', 'zpool_upgrade_008_pos',
|
||||
'zpool_upgrade_009_neg']
|
||||
|
||||
# DISABLED:
|
||||
|
|
@ -667,15 +638,13 @@ tests = ['zvol_ENOSPC_001_pos']
|
|||
[tests/functional/zvol/zvol_cli]
|
||||
tests = ['zvol_cli_001_pos', 'zvol_cli_002_pos', 'zvol_cli_003_neg']
|
||||
|
||||
# DISABLED: requires dumpadm
|
||||
#[tests/functional/zvol/zvol_misc]
|
||||
#tests = ['zvol_misc_001_neg', 'zvol_misc_002_pos', 'zvol_misc_003_neg',
|
||||
# 'zvol_misc_004_pos', 'zvol_misc_005_neg', 'zvol_misc_006_pos']
|
||||
[tests/functional/zvol/zvol_misc]
|
||||
tests = ['zvol_misc_001_neg', 'zvol_misc_002_pos', 'zvol_misc_003_neg',
|
||||
'zvol_misc_004_pos', 'zvol_misc_005_neg', 'zvol_misc_006_pos']
|
||||
|
||||
# DISABLED: requires updated for Linux
|
||||
#[tests/functional/zvol/zvol_swap]
|
||||
#tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos', 'zvol_swap_003_pos',
|
||||
# 'zvol_swap_004_pos', 'zvol_swap_005_pos', 'zvol_swap_006_pos']
|
||||
[tests/functional/zvol/zvol_swap]
|
||||
tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos', 'zvol_swap_003_pos',
|
||||
'zvol_swap_004_pos', 'zvol_swap_005_pos', 'zvol_swap_006_pos']
|
||||
|
||||
[tests/functional/libzfs]
|
||||
tests = ['many_fds']
|
||||
|
|
|
|||
|
|
@ -65,6 +65,7 @@ export SYSTEM_FILES='arp
|
|||
md5sum
|
||||
mkdir
|
||||
mknod
|
||||
mkswap
|
||||
mktemp
|
||||
modprobe
|
||||
mount
|
||||
|
|
@ -100,6 +101,7 @@ export SYSTEM_FILES='arp
|
|||
su
|
||||
sudo
|
||||
sum
|
||||
swapoff
|
||||
swapon
|
||||
sync
|
||||
tail
|
||||
|
|
|
|||
|
|
@ -3302,3 +3302,59 @@ function zed_stop
|
|||
log_must rmdir $ZEDLET_DIR
|
||||
fi
|
||||
}
|
||||
|
||||
#
|
||||
# Check is provided device is being active used as a swap device.
|
||||
#
|
||||
function is_swap_inuse
|
||||
{
|
||||
typeset device=$1
|
||||
|
||||
if [[ -z $device ]] ; then
|
||||
log_note "No device specified."
|
||||
return 1
|
||||
fi
|
||||
|
||||
if is_linux; then
|
||||
swapon -s | grep -w $(readlink -f $device) > /dev/null 2>&1
|
||||
else
|
||||
swap -l | grep -w $device > /dev/null 2>&1
|
||||
fi
|
||||
|
||||
return $?
|
||||
}
|
||||
|
||||
#
|
||||
# Setup a swap device using the provided device.
|
||||
#
|
||||
function swap_setup
|
||||
{
|
||||
typeset swapdev=$1
|
||||
|
||||
if is_linux; then
|
||||
log_must mkswap $swapdev > /dev/null 2>&1
|
||||
log_must swapon $swapdev
|
||||
else
|
||||
log_must swap -a $swapdev
|
||||
fi
|
||||
|
||||
return 0
|
||||
}
|
||||
|
||||
#
|
||||
# Cleanup a swap device on the provided device.
|
||||
#
|
||||
function swap_cleanup
|
||||
{
|
||||
typeset swapdev=$1
|
||||
|
||||
if is_swap_inuse $swapdev; then
|
||||
if is_linux; then
|
||||
log_must swapoff $swapdev
|
||||
else
|
||||
log_must swap -d $swapdev
|
||||
fi
|
||||
fi
|
||||
|
||||
return 0
|
||||
}
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@ verify_runnable "global"
|
|||
function cleanup
|
||||
{
|
||||
if snapexists $SNAPFS1 ; then
|
||||
log_must zfs destroy -Rf $SNAPFS1
|
||||
log_must_busy zfs destroy -Rf $SNAPFS1
|
||||
fi
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -161,7 +161,8 @@ function test_n_check
|
|||
fi
|
||||
|
||||
# Invoke 'zfs destroy [-rRf] <dataset>'
|
||||
log_must zfs destroy $opt $dtst
|
||||
log_must_busy zfs destroy $opt $dtst
|
||||
block_device_wait
|
||||
|
||||
# Kill any lingering instances of mkbusy, and clear the list.
|
||||
if ! is_linux ; then
|
||||
|
|
|
|||
|
|
@ -89,6 +89,7 @@ function setup_testenv #[dtst]
|
|||
fi
|
||||
if ! datasetexists $VOLCLONE && is_global_zone; then
|
||||
log_must zfs clone $VOLSNAP $VOLCLONE
|
||||
block_device_wait
|
||||
fi
|
||||
fi
|
||||
}
|
||||
|
|
|
|||
|
|
@ -181,7 +181,8 @@ log_must eval "zfs send $orig@snap1 > $streamfile_full"
|
|||
log_mustnot eval "zfs recv $dest -x volsize < $streamfile_full"
|
||||
log_mustnot eval "zfs recv $dest -o volsize=32K < $streamfile_full"
|
||||
# Cleanup
|
||||
log_must zfs destroy -r -f $orig
|
||||
block_device_wait
|
||||
log_must_busy zfs destroy -r -f $orig
|
||||
|
||||
#
|
||||
# 3.2 Verify -o property=value works on streams without properties.
|
||||
|
|
|
|||
|
|
@ -150,12 +150,12 @@ function default_check_zfs_upgrade #rootfs
|
|||
|
||||
if (( df_ret != 0 )); then
|
||||
if (( spa_version != 0 )) && (( vp < spa_version )); then
|
||||
log_mustnot eval 'zfs upgrade $opt -a > /dev/null 2>&1'
|
||||
log_must eval 'zpool upgrade $pool > /dev/null 2>&1'
|
||||
log_mustnot zfs upgrade $opt -a >/dev/null
|
||||
log_must zpool upgrade $pool >/dev/null
|
||||
vp=$(get_pool_prop version $pool)
|
||||
fi
|
||||
|
||||
log_must eval 'zfs upgrade $opt -a > /dev/null 2>&1'
|
||||
log_must zfs upgrade $opt -a
|
||||
|
||||
for fs in $(zfs list -rH -t filesystem -o name $rootfs) ; do
|
||||
log_must check_fs_version $fs $newv
|
||||
|
|
|
|||
|
|
@ -36,12 +36,18 @@
|
|||
#
|
||||
function find_vfstab_dev
|
||||
{
|
||||
typeset vfstab="/etc/vfstab"
|
||||
typeset tmpfile="/tmp/vfstab.tmp"
|
||||
typeset vfstabdev
|
||||
typeset vfstabdevs=""
|
||||
typeset line
|
||||
|
||||
if is_linux; then
|
||||
vfstab="/etc/fstab"
|
||||
tmpfile="/tmp/fstab.tmp"
|
||||
else
|
||||
vfstab="/etc/vfstab"
|
||||
tmpfile="/tmp/vfstab.tmp"
|
||||
fi
|
||||
|
||||
cat $vfstab | grep "^${DEV_DSKDIR}" >$tmpfile
|
||||
while read -r line
|
||||
do
|
||||
|
|
@ -59,12 +65,18 @@ function find_vfstab_dev
|
|||
#
|
||||
function find_mnttab_dev
|
||||
{
|
||||
typeset mnttab="/etc/mnttab"
|
||||
typeset tmpfile="/tmp/mnttab.tmp"
|
||||
typeset mnttabdev
|
||||
typeset mnttabdevs=""
|
||||
typeset line
|
||||
|
||||
if is_linux; then
|
||||
typeset mnttab="/etc/mtab"
|
||||
typeset tmpfile="/tmp/mtab.tmp"
|
||||
else
|
||||
typeset mnttab="/etc/mnttab"
|
||||
typeset tmpfile="/tmp/mnttab.tmp"
|
||||
fi
|
||||
|
||||
cat $mnttab | grep "^${DEV_DSKDIR}" >$tmpfile
|
||||
while read -r line
|
||||
do
|
||||
|
|
@ -84,10 +96,14 @@ function save_dump_dev
|
|||
{
|
||||
|
||||
typeset dumpdev
|
||||
typeset fnd="Dump device"
|
||||
|
||||
dumpdev=`dumpadm | grep "$fnd" | cut -f2 -d : | \
|
||||
awk '{print $1}'`
|
||||
if is_linux; then
|
||||
dumpdev=""
|
||||
else
|
||||
typeset fnd="Dump device"
|
||||
dumpdev=`dumpadm | grep "$fnd" | cut -f2 -d : | \
|
||||
awk '{print $1}'`
|
||||
fi
|
||||
echo $dumpdev
|
||||
}
|
||||
|
||||
|
|
@ -97,13 +113,13 @@ function save_dump_dev
|
|||
function partition_cleanup
|
||||
{
|
||||
|
||||
if [[ -n $DISK ]]; then
|
||||
partition_disk $SIZE $DISK 7
|
||||
else
|
||||
typeset disk=""
|
||||
for disk in $DISK0 $DISK1; do
|
||||
partition_disk $SIZE $disk 7
|
||||
done
|
||||
fi
|
||||
if [[ -n $DISK ]]; then
|
||||
partition_disk $SIZE $DISK 7
|
||||
else
|
||||
typeset disk=""
|
||||
for disk in $DISK0 $DISK1; do
|
||||
partition_disk $SIZE $disk 7
|
||||
done
|
||||
fi
|
||||
|
||||
}
|
||||
|
|
|
|||
|
|
@ -45,6 +45,11 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
# See issue: https://github.com/zfsonlinux/zfs/issues/6065
|
||||
if is_linux; then
|
||||
log_unsupported "Creating a pool containing a zvol may deadlock"
|
||||
fi
|
||||
|
||||
function cleanup
|
||||
{
|
||||
poolexists $TESTPOOL && \
|
||||
|
|
@ -71,7 +76,7 @@ log_must poolexists "$TESTPOOL1"
|
|||
log_must zfs create -V $VOLSIZE $TESTPOOL1/$TESTVOL
|
||||
block_device_wait
|
||||
|
||||
log_must zpool add "$TESTPOOL" /dev/zvol/dsk/$TESTPOOL1/$TESTVOL
|
||||
log_must zpool add "$TESTPOOL" $ZVOL_DEVDIR/$TESTPOOL1/$TESTVOL
|
||||
|
||||
log_must vdevs_in_pool "$TESTPOOL" "$ZVOL_DEVDIR/$TESTPOOL1/$TESTVOL"
|
||||
|
||||
|
|
|
|||
|
|
@ -78,12 +78,14 @@ create_pool "$TESTPOOL1" "${disk}${SLICE_PREFIX}${SLICE1}"
|
|||
log_must poolexists "$TESTPOOL1"
|
||||
|
||||
unset NOINUSE_CHECK
|
||||
log_mustnot zpool add -f "$TESTPOOL" ${disk}s${SLICE1}
|
||||
log_mustnot zpool add -f "$TESTPOOL" ${disk}${SLICE_PREFIX}${SLICE1}
|
||||
log_mustnot zpool add -f "$TESTPOOL" $mnttab_dev
|
||||
log_mustnot zpool add -f "$TESTPOOL" $vfstab_dev
|
||||
|
||||
log_must echo "y" | newfs ${DEV_DSKDIR}/$dump_dev > /dev/null 2>&1
|
||||
log_must dumpadm -u -d ${DEV_DSKDIR}/$dump_dev > /dev/null
|
||||
log_mustnot zpool add -f "$TESTPOOL" $dump_dev
|
||||
if ! is_linux; then
|
||||
log_must echo "y" | newfs ${DEV_DSKDIR}/$dump_dev > /dev/null 2>&1
|
||||
log_must dumpadm -u -d ${DEV_DSKDIR}/$dump_dev > /dev/null
|
||||
log_mustnot zpool add -f "$TESTPOOL" $dump_dev
|
||||
fi
|
||||
|
||||
log_pass "'zpool add' should fail with inapplicable scenarios."
|
||||
|
|
|
|||
|
|
@ -59,19 +59,18 @@ function cleanup
|
|||
log_assert "Adding a large number of file based vdevs to a zpool works."
|
||||
log_onexit cleanup
|
||||
|
||||
create_pool $TESTPOOL ${DISKS%% *}
|
||||
log_must zfs create -o mountpoint=$TESTDIR $TESTPOOL/$TESTFS
|
||||
log_must mkfile $MINVDEVSIZE $TESTDIR/file.00
|
||||
log_must mkdir -p $TESTDIR
|
||||
log_must truncate -s $MINVDEVSIZE $TESTDIR/file.00
|
||||
create_pool "$TESTPOOL1" "$TESTDIR/file.00"
|
||||
|
||||
vdevs_list=$(echo $TESTDIR/file.{01..16})
|
||||
log_must mkfile $MINVDEVSIZE $vdevs_list
|
||||
log_must truncate -s $MINVDEVSIZE $vdevs_list
|
||||
|
||||
log_must zpool add -f "$TESTPOOL1" $vdevs_list
|
||||
log_must vdevs_in_pool "$TESTPOOL1" "$vdevs_list"
|
||||
|
||||
# Attempt to add a file based vdev that's too small.
|
||||
log_must mkfile 32m $TESTDIR/broken_file
|
||||
log_must truncate -s 32m $TESTDIR/broken_file
|
||||
log_mustnot zpool add -f "$TESTPOOL1" ${TESTDIR}/broken_file
|
||||
log_mustnot vdevs_in_pool "$TESTPOOL1" "${TESTDIR}/broken_file"
|
||||
|
||||
|
|
|
|||
|
|
@ -141,23 +141,17 @@ function do_testing #<clear type> <vdevs>
|
|||
log_must zpool create -f $TESTPOOL1 $vdev
|
||||
log_must zfs create $FS
|
||||
#
|
||||
# Fully fill up the zfs filesystem in order to make data block errors
|
||||
# zfs filesystem
|
||||
# Partially fill up the zfs filesystem in order to make data block
|
||||
# errors. It's not necessary to fill the entire filesystem.
|
||||
#
|
||||
typeset -i ret=0
|
||||
typeset -i i=0
|
||||
while true ; do
|
||||
file_write -o create -f $file.$i -b $BLOCKSZ -c $NUM_WRITES
|
||||
ret=$?
|
||||
(( $ret != 0 )) && break
|
||||
(( i = i + 1 ))
|
||||
done
|
||||
(( $ret != 28 )) && log_fail "file_write fails to fully fill up the $FS."
|
||||
avail=$(get_prop available $FS)
|
||||
fill_mb=$(((avail / 1024 / 1024) * 25 / 100))
|
||||
log_must dd if=/dev/urandom of=$file.$i bs=$BLOCKSZ count=$fill_mb
|
||||
|
||||
#
|
||||
#Make errors to the testing pool by overwrite the vdev device with
|
||||
#/usr/bin/dd command. We donot want to have a full overwrite. That
|
||||
#may cause the system panic. So, we should skip the vdev label space.
|
||||
# Make errors to the testing pool by overwrite the vdev device with
|
||||
# /usr/bin/dd command. We do not want to have a full overwrite. That
|
||||
# may cause the system panic. So, we should skip the vdev label space.
|
||||
#
|
||||
(( i = $RANDOM % 3 ))
|
||||
typeset -i wcount=0
|
||||
|
|
|
|||
|
|
@ -79,7 +79,7 @@ function create_blockfile
|
|||
log_fail "Create file system fail."
|
||||
|
||||
log_must mount ${DEV_DSKDIR}/$disk $dir
|
||||
log_must mkfile $size $file
|
||||
log_must truncate -s $size $file
|
||||
}
|
||||
|
||||
#
|
||||
|
|
@ -121,12 +121,18 @@ function clean_blockfile
|
|||
#
|
||||
function find_vfstab_dev
|
||||
{
|
||||
typeset vfstab="/etc/vfstab"
|
||||
typeset tmpfile="/tmp/vfstab.tmp"
|
||||
typeset vfstabdev
|
||||
typeset vfstabdevs=""
|
||||
typeset line
|
||||
|
||||
if is_linux; then
|
||||
vfstab="/etc/fstab"
|
||||
tmpfile="/tmp/fstab.tmp"
|
||||
else
|
||||
vfstab="/etc/vfstab"
|
||||
tmpfile="/tmp/vfstab.tmp"
|
||||
fi
|
||||
|
||||
cat $vfstab | grep "^${DEV_DSKDIR}" >$tmpfile
|
||||
while read -r line
|
||||
do
|
||||
|
|
@ -144,11 +150,14 @@ function find_vfstab_dev
|
|||
#
|
||||
function save_dump_dev
|
||||
{
|
||||
|
||||
typeset dumpdev
|
||||
typeset fnd="Dump device"
|
||||
|
||||
dumpdev=`dumpadm | grep "$fnd" | cut -f2 -d : | \
|
||||
awk '{print $1}'`
|
||||
if is_linux; then
|
||||
dumpdev=""
|
||||
else
|
||||
typeset fnd="Dump device"
|
||||
dumpdev=`dumpadm | grep "$fnd" | cut -f2 -d : | \
|
||||
awk '{print $1}'`
|
||||
fi
|
||||
echo $dumpdev
|
||||
}
|
||||
|
|
|
|||
|
|
@ -80,9 +80,9 @@ log_must echo "y" | newfs \
|
|||
${DEV_RDSKDIR}/${disk}${SLICE_PREFIX}${SLICE1} >/dev/null 2>&1
|
||||
create_blockfile $FILESIZE $TESTDIR0/$FILEDISK0 ${disk}${SLICE_PREFIX}${SLICE4}
|
||||
create_blockfile $FILESIZE1 $TESTDIR1/$FILEDISK1 ${disk}${SLICE_PREFIX}${SLICE5}
|
||||
log_must mkfile $SIZE /var/tmp/$FILEDISK0
|
||||
log_must mkfile $SIZE /var/tmp/$FILEDISK1
|
||||
log_must mkfile $SIZE /var/tmp/$FILEDISK2
|
||||
log_must truncate -s $SIZE /var/tmp/$FILEDISK0
|
||||
log_must truncate -s $SIZE /var/tmp/$FILEDISK1
|
||||
log_must truncate -s $SIZE /var/tmp/$FILEDISK2
|
||||
|
||||
unset NOINUSE_CHECK
|
||||
log_must zpool export $TESTPOOL
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@ create_pool $TESTPOOL $disk
|
|||
log_must zfs create -o mountpoint=$TESTDIR $TESTPOOL/$TESTFS
|
||||
|
||||
vdevs_list=$(echo $TESTDIR/file.{01..16})
|
||||
log_must mkfile $MINVDEVSIZE $vdevs_list
|
||||
log_must truncate -s $MINVDEVSIZE $vdevs_list
|
||||
|
||||
create_pool "$TESTPOOL1" $vdevs_list
|
||||
log_must vdevs_in_pool "$TESTPOOL1" "$vdevs_list"
|
||||
|
|
|
|||
|
|
@ -87,7 +87,8 @@ set -A valid_args \
|
|||
spare $vdev6" \
|
||||
"raidz2 $vdev0 $vdev1 $vdev2 raidz2 $vdev3 $vdev4 $vdev5 \
|
||||
raidz2 $vdev6 $vdev7 $vdev8 spare $vdev9" \
|
||||
"raidz2 $vdev0 $vdev1 $vdev2 spare $vdev3 raidz2 $vdev4 $vdev5 $vdev6"
|
||||
"raidz2 $vdev0 $vdev1 $vdev2 spare $vdev3 raidz2 $vdev4 $vdev5 $vdev6" \
|
||||
"spare $vdev0 $vdev1 $vdev2 mirror $vdev3 $vdev4 raidz $vdev5 $vdev6"
|
||||
|
||||
set -A forced_args \
|
||||
"$vdev0 raidz $vdev1 $vdev2 raidz1 $vdev3 $vdev4 $vdev5" \
|
||||
|
|
@ -104,7 +105,8 @@ set -A forced_args \
|
|||
raidz2 $vdev4 $vdev5 $vdev6 spare $vdev7" \
|
||||
"mirror $vdev0 $vdev1 raidz $vdev2 $vdev3 \
|
||||
spare $vdev4 raidz2 $vdev5 $vdev6 $vdev7" \
|
||||
"spare $vdev0 $vdev1 $vdev2 mirror $vdev3 $vdev4 raidz $vdev5 $vdev6"
|
||||
"spare $vdev0 $vdev1 $vdev2 mirror $vdev3 $vdev4 \
|
||||
raidz2 $vdev5 $vdev6 $vdev7"
|
||||
|
||||
i=0
|
||||
while ((i < ${#valid_args[@]})); do
|
||||
|
|
|
|||
|
|
@ -125,14 +125,16 @@ fi
|
|||
create_pool $TESTPOOL $disk
|
||||
destroy_pool $TESTPOOL
|
||||
|
||||
# Make the disk is VTOC labeled since only VTOC label supports overlap
|
||||
log_must labelvtoc $disk
|
||||
log_must create_overlap_slice $disk
|
||||
if ! is_linux; then
|
||||
# Make the disk is VTOC labeled since only VTOC label supports overlap
|
||||
log_must labelvtoc $disk
|
||||
log_must create_overlap_slice $disk
|
||||
|
||||
unset NOINUSE_CHECK
|
||||
log_mustnot zpool create $TESTPOOL ${disk}${SLICE_PREFIX}${SLICE0}
|
||||
log_must zpool create -f $TESTPOOL ${disk}${SLICE_PREFIX}${SLICE0}
|
||||
destroy_pool $TESTPOOL
|
||||
unset NOINUSE_CHECK
|
||||
log_mustnot zpool create $TESTPOOL ${disk}${SLICE_PREFIX}${SLICE0}
|
||||
log_must zpool create -f $TESTPOOL ${disk}${SLICE_PREFIX}${SLICE0}
|
||||
destroy_pool $TESTPOOL
|
||||
fi
|
||||
|
||||
# exported device to be as spare vdev need -f to create pool
|
||||
|
||||
|
|
|
|||
|
|
@ -49,25 +49,25 @@ verify_runnable "global"
|
|||
|
||||
function cleanup
|
||||
{
|
||||
for pool in $TESTPOOL $TESTPOOL1
|
||||
do
|
||||
destroy_pool $pool
|
||||
done
|
||||
for pool in $TESTPOOL $TESTPOOL1
|
||||
do
|
||||
destroy_pool $pool
|
||||
done
|
||||
|
||||
if [[ -n $saved_dump_dev ]]; then
|
||||
log_must dumpadm -u -d $saved_dump_dev
|
||||
fi
|
||||
|
||||
partition_disk $SIZE $disk 6
|
||||
partition_disk $SIZE $disk 7
|
||||
}
|
||||
|
||||
log_assert "'zpool create' should be failed with inapplicable scenarios."
|
||||
log_onexit cleanup
|
||||
|
||||
if [[ -n $DISK ]]; then
|
||||
disk=$DISK
|
||||
disk=$DISK
|
||||
else
|
||||
disk=$DISK0
|
||||
disk=$DISK0
|
||||
fi
|
||||
pooldev1=${disk}${SLICE_PREFIX}${SLICE0}
|
||||
pooldev2=${disk}${SLICE_PREFIX}${SLICE1}
|
||||
|
|
@ -77,55 +77,64 @@ raidz1=$mirror1
|
|||
raidz2=$mirror2
|
||||
diff_size_dev="${disk}${SLICE_PREFIX}${SLICE6} ${disk}${SLICE_PREFIX}${SLICE7}"
|
||||
vfstab_dev=$(find_vfstab_dev)
|
||||
specified_dump_dev=${disk}${SLICE_PREFIX}${SLICE0}
|
||||
saved_dump_dev=$(save_dump_dev)
|
||||
|
||||
cyl=$(get_endslice $disk $SLICE6)
|
||||
set_partition $SLICE7 "$cyl" $SIZE1 $disk
|
||||
if is_linux; then
|
||||
partition_disk $SIZE $disk 7
|
||||
cyl=$(get_endslice $disk $SLICE5)
|
||||
set_partition $SLICE6 "$cyl" $SIZE1 $disk
|
||||
else
|
||||
specified_dump_dev=${disk}${SLICE_PREFIX}${SLICE0}
|
||||
saved_dump_dev=$(save_dump_dev)
|
||||
|
||||
cyl=$(get_endslice $disk $SLICE6)
|
||||
set_partition $SLICE7 "$cyl" $SIZE1 $disk
|
||||
fi
|
||||
create_pool "$TESTPOOL" "$pooldev1"
|
||||
|
||||
#
|
||||
# Set up the testing scenarios parameters
|
||||
#
|
||||
set -A arg "$TESTPOOL $pooldev2" \
|
||||
"$TESTPOOL1 $pooldev1" \
|
||||
"$TESTPOOL1 $TESTDIR0/$FILEDISK0" \
|
||||
"$TESTPOOL1 mirror mirror $mirror1 mirror $mirror2" \
|
||||
"$TESTPOOL1 raidz raidz $raidz1 raidz $raidz2" \
|
||||
"$TESTPOOL1 raidz1 raidz1 $raidz1 raidz1 $raidz2" \
|
||||
"$TESTPOOL1 mirror raidz $raidz1 raidz $raidz2" \
|
||||
"$TESTPOOL1 mirror raidz1 $raidz1 raidz1 $raidz2" \
|
||||
"$TESTPOOL1 raidz mirror $mirror1 mirror $mirror2" \
|
||||
"$TESTPOOL1 raidz1 mirror $mirror1 mirror $mirror2" \
|
||||
"$TESTPOOL1 mirror $diff_size_dev" \
|
||||
"$TESTPOOL1 raidz $diff_size_dev" \
|
||||
"$TESTPOOL1 raidz1 $diff_size_dev" \
|
||||
"$TESTPOOL1 $pooldev1" \
|
||||
"$TESTPOOL1 $TESTDIR0/$FILEDISK0" \
|
||||
"$TESTPOOL1 mirror mirror $mirror1 mirror $mirror2" \
|
||||
"$TESTPOOL1 raidz raidz $raidz1 raidz $raidz2" \
|
||||
"$TESTPOOL1 raidz1 raidz1 $raidz1 raidz1 $raidz2" \
|
||||
"$TESTPOOL1 mirror raidz $raidz1 raidz $raidz2" \
|
||||
"$TESTPOOL1 mirror raidz1 $raidz1 raidz1 $raidz2" \
|
||||
"$TESTPOOL1 raidz mirror $mirror1 mirror $mirror2" \
|
||||
"$TESTPOOL1 raidz1 mirror $mirror1 mirror $mirror2" \
|
||||
"$TESTPOOL1 mirror $diff_size_dev" \
|
||||
"$TESTPOOL1 raidz $diff_size_dev" \
|
||||
"$TESTPOOL1 raidz1 $diff_size_dev" \
|
||||
"$TESTPOOL1 mirror $mirror1 spare $mirror2 spare $diff_size_dev" \
|
||||
"$TESTPOOL1 $vfstab_dev" \
|
||||
"$TESTPOOL1 ${disk}s10" \
|
||||
"$TESTPOOL1 $vfstab_dev" \
|
||||
"$TESTPOOL1 ${disk}s10" \
|
||||
"$TESTPOOL1 spare $pooldev2"
|
||||
|
||||
unset NOINUSE_CHECK
|
||||
typeset -i i=0
|
||||
while (( i < ${#arg[*]} )); do
|
||||
log_mustnot zpool create ${arg[i]}
|
||||
(( i = i+1 ))
|
||||
log_mustnot zpool create ${arg[i]}
|
||||
(( i = i+1 ))
|
||||
done
|
||||
|
||||
# now destroy the pool to be polite
|
||||
log_must zpool destroy -f $TESTPOOL
|
||||
|
||||
# create/destroy a pool as a simple way to set the partitioning
|
||||
# back to something normal so we can use this $disk as a dump device
|
||||
log_must zpool create -f $TESTPOOL3 $disk
|
||||
log_must zpool destroy -f $TESTPOOL3
|
||||
if ! is_linux; then
|
||||
# create/destroy a pool as a simple way to set the partitioning
|
||||
# back to something normal so we can use this $disk as a dump device
|
||||
log_must zpool create -f $TESTPOOL3 $disk
|
||||
log_must zpool destroy -f $TESTPOOL3
|
||||
|
||||
log_must dumpadm -d ${DEV_DSKDIR}/$specified_dump_dev
|
||||
log_mustnot zpool create -f $TESTPOOL1 "$specified_dump_dev"
|
||||
log_must dumpadm -d ${DEV_DSKDIR}/$specified_dump_dev
|
||||
log_mustnot zpool create -f $TESTPOOL1 "$specified_dump_dev"
|
||||
|
||||
# Also check to see that in-use checking prevents us from creating
|
||||
# a zpool from just the first slice on the disk.
|
||||
log_mustnot zpool create \
|
||||
-f $TESTPOOL1 ${specified_dump_dev}${SLICE_PREFIX}${SLICE0}
|
||||
# Also check to see that in-use checking prevents us from creating
|
||||
# a zpool from just the first slice on the disk.
|
||||
log_mustnot zpool create \
|
||||
-f $TESTPOOL1 ${specified_dump_dev}${SLICE_PREFIX}${SLICE0}
|
||||
fi
|
||||
|
||||
log_pass "'zpool create' is failed as expected with inapplicable scenarios."
|
||||
|
|
|
|||
|
|
@ -50,10 +50,14 @@ function cleanup
|
|||
if poolexists $TESTPOOL; then
|
||||
destroy_pool $TESTPOOL
|
||||
fi
|
||||
|
||||
}
|
||||
typeset swap_disks=`swap -l | grep "c[0-9].*d[0-9].*s[0-9]" | \
|
||||
awk '{print $1}'`
|
||||
|
||||
if is_linux; then
|
||||
typeset swap_disks=`swapon -s | grep "/dev" | awk '{print $1}'`
|
||||
else
|
||||
typeset swap_disks=`swap -l | grep "c[0-9].*d[0-9].*s[0-9]" | \
|
||||
awk '{print $1}'`
|
||||
fi
|
||||
|
||||
log_assert "'zpool create' should fail with disk slice in swap."
|
||||
log_onexit cleanup
|
||||
|
|
|
|||
|
|
@ -48,10 +48,7 @@ verify_runnable "global"
|
|||
function cleanup
|
||||
{
|
||||
if datasetexists $vol_name; then
|
||||
swap -l | grep $TMP_FILE > /dev/null 2>&1
|
||||
if [[ $? -eq 0 ]]; then
|
||||
log_must swap -d $TMP_FILE
|
||||
fi
|
||||
swap_cleanup $TMP_FILE
|
||||
rm -f $TMP_FILE
|
||||
log_must umount $mntp
|
||||
zfs destroy $vol_name
|
||||
|
|
@ -71,6 +68,12 @@ else
|
|||
disk=$DISK0
|
||||
fi
|
||||
|
||||
if is_linux; then
|
||||
set -A options "" "-f"
|
||||
else
|
||||
set -A options "-n" "" "-f"
|
||||
fi
|
||||
|
||||
typeset pool_dev=${disk}${SLICE_PREFIX}${SLICE0}
|
||||
typeset vol_name=$TESTPOOL/$TESTVOL
|
||||
typeset mntp=/mnt
|
||||
|
|
@ -78,13 +81,14 @@ typeset TMP_FILE=$mntp/tmpfile.$$
|
|||
|
||||
create_pool $TESTPOOL $pool_dev
|
||||
log_must zfs create -V 100m $vol_name
|
||||
block_device_wait
|
||||
log_must echo "y" | newfs ${ZVOL_DEVDIR}/$vol_name > /dev/null 2>&1
|
||||
log_must mount ${ZVOL_DEVDIR}/$vol_name $mntp
|
||||
|
||||
log_must mkfile 50m $TMP_FILE
|
||||
log_must swap -a $TMP_FILE
|
||||
swap_setup $TMP_FILE
|
||||
|
||||
for opt in "-n" "" "-f"; do
|
||||
for opt in options; do
|
||||
log_mustnot zpool create $opt $TESTPOOL $TMP_FILE
|
||||
done
|
||||
|
||||
|
|
|
|||
|
|
@ -52,10 +52,7 @@ function cleanup
|
|||
{
|
||||
# cleanup zfs pool and dataset
|
||||
if datasetexists $vol_name; then
|
||||
swap -l | grep ${ZVOL_DEVDIR}/$vol_name > /dev/null 2>&1
|
||||
if [[ $? -eq 0 ]]; then
|
||||
swap -d ${ZVOL_DEVDIR}/${vol_name}
|
||||
fi
|
||||
swap_cleanup ${ZVOL_DEVDIR}/${vol_name}
|
||||
fi
|
||||
|
||||
for pool in $TESTPOOL1 $TESTPOOL; do
|
||||
|
|
@ -83,14 +80,16 @@ log_onexit cleanup
|
|||
#
|
||||
create_pool $TESTPOOL $pool_dev
|
||||
log_must zfs create -V 100m $vol_name
|
||||
log_must swap -a ${ZVOl_DEVDIR}/$vol_name
|
||||
block_device_wait
|
||||
swap_setup ${ZVOL_DEVDIR}/$vol_name
|
||||
|
||||
for opt in "-n" "" "-f"; do
|
||||
log_mustnot zpool create $opt $TESTPOOL1 ${ZVOL_DEVDIR}/${vol_name}
|
||||
done
|
||||
|
||||
# cleanup
|
||||
log_must swap -d ${ZVOL_DEVDIR}/${vol_name}
|
||||
log_must zfs destroy $vol_name
|
||||
swap_cleanup ${ZVOL_DEVDIR}/${vol_name}
|
||||
log_must_busy zfs destroy $vol_name
|
||||
log_must zpool destroy $TESTPOOL
|
||||
|
||||
log_pass "'zpool create' passed as expected with inapplicable scenario."
|
||||
|
|
|
|||
|
|
@ -46,6 +46,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if is_linux; then
|
||||
log_unsupported "Test case isn't useful under Linux."
|
||||
fi
|
||||
|
||||
function cleanup
|
||||
{
|
||||
if poolexists $TESTPOOL; then
|
||||
|
|
|
|||
|
|
@ -49,9 +49,9 @@ function cleanup
|
|||
if poolexists $TESTPOOL ; then
|
||||
destroy_pool $TESTPOOL
|
||||
fi
|
||||
if [ -d ${TESTPOOL}.root ]
|
||||
if [ -d /${TESTPOOL}.root ]
|
||||
then
|
||||
log_must rmdir ${TESTPOOL}.root
|
||||
log_must rmdir /${TESTPOOL}.root
|
||||
fi
|
||||
}
|
||||
|
||||
|
|
@ -65,6 +65,7 @@ else
|
|||
disk=$DISK0
|
||||
fi
|
||||
|
||||
log_must rm -f /etc/zfs/zpool.cache
|
||||
log_must mkdir /${TESTPOOL}.root
|
||||
log_must zpool create -R /${TESTPOOL}.root $TESTPOOL $disk
|
||||
if [ ! -d /${TESTPOOL}.root ]
|
||||
|
|
|
|||
|
|
@ -29,6 +29,8 @@
|
|||
#
|
||||
|
||||
export DISK=${DISKS%% *}
|
||||
export DISK_ARRAY_NUM=$(echo ${DISKS} | nawk '{print NF}')
|
||||
export DISKSARRAY=$DISKS
|
||||
|
||||
if is_linux; then
|
||||
set_device_dir
|
||||
|
|
|
|||
|
|
@ -72,9 +72,15 @@ log_onexit cleanup
|
|||
partition_disk $SLICE_SIZE $DISK 2
|
||||
|
||||
create_pool "$TESTPOOL" "${DISK}${SLICE_PREFIX}${SLICE0}"
|
||||
create_pool "$TESTPOOL1" "${DISK}${SLICE_PREFIX}${SLICE1}"
|
||||
log_must zfs create -s -V $VOLSIZE $TESTPOOL1/$TESTVOL
|
||||
create_pool "$TESTPOOL2" "${ZVOL_DEVDIR}/$TESTPOOL1/$TESTVOL"
|
||||
|
||||
if is_linux; then
|
||||
# Layering a pool on a zvol can deadlock and isn't supported.
|
||||
create_pool "$TESTPOOL2" "${DISK}${SLICE_PREFIX}${SLICE1}"
|
||||
else
|
||||
create_pool "$TESTPOOL1" "${DISK}${SLICE_PREFIX}${SLICE1}"
|
||||
log_must zfs create -s -V $VOLSIZE $TESTPOOL1/$TESTVOL
|
||||
create_pool "$TESTPOOL2" "${ZVOL_DEVDIR}/$TESTPOOL1/$TESTVOL"
|
||||
fi
|
||||
|
||||
typeset -i i=0
|
||||
while (( i < ${#datasets[*]} )); do
|
||||
|
|
|
|||
|
|
@ -111,6 +111,11 @@ for dir in $TESTDIR /$TESTPOOL/$TESTCTR /$TESTPOOL/$TESTCTR/$TESTFS1 ; do
|
|||
done
|
||||
done
|
||||
|
||||
# 4. 'zpool destroy -f' the pool (unsupported behavior in Linux)
|
||||
if is_linux; then
|
||||
log_must cd $cwd
|
||||
fi
|
||||
|
||||
destroy_pool $TESTPOOL
|
||||
log_mustnot poolexists "$TESTPOOL"
|
||||
|
||||
|
|
|
|||
|
|
@ -48,6 +48,11 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
# See issue: https://github.com/zfsonlinux/zfs/issues/6065
|
||||
if is_linux; then
|
||||
log_unsupported "Creating a pool containing a zvol may deadlock"
|
||||
fi
|
||||
|
||||
function cleanup
|
||||
{
|
||||
if poolexists $TESTPOOL1; then
|
||||
|
|
|
|||
|
|
@ -48,6 +48,11 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
# See issue: https://github.com/zfsonlinux/zfs/issues/6065
|
||||
if is_linux; then
|
||||
log_unsupported "Creating a pool containing a zvol may deadlock"
|
||||
fi
|
||||
|
||||
function cleanup
|
||||
{
|
||||
if poolexists $TESTPOOL1; then
|
||||
|
|
|
|||
|
|
@ -52,8 +52,8 @@ verify_runnable "global"
|
|||
|
||||
function cleanup
|
||||
{
|
||||
mntpnt=$(get_prop mountpoint $TESTPOOL)
|
||||
datasetexists $TESTPOOL1 || log_must zpool import -d $mntpnt $TESTPOOL1
|
||||
mntpnt=$TESTDIR0
|
||||
datasetexists $TESTPOOL1 || log_must zpool import -d $mntpnt $TESTPOOL1
|
||||
datasetexists $TESTPOOL1 && destroy_pool $TESTPOOL1
|
||||
datasetexists $TESTPOOL2 && destroy_pool $TESTPOOL2
|
||||
typeset -i i=0
|
||||
|
|
@ -63,17 +63,21 @@ function cleanup
|
|||
fi
|
||||
((i += 1))
|
||||
done
|
||||
log_must rmdir $mntpnt
|
||||
}
|
||||
|
||||
|
||||
log_assert "Verify zpool export succeed or fail with spare."
|
||||
log_onexit cleanup
|
||||
|
||||
mntpnt=$(get_prop mountpoint $TESTPOOL)
|
||||
mntpnt=$TESTDIR0
|
||||
log_must mkdir -p $mntpnt
|
||||
|
||||
# mntpnt=$(get_prop mountpoint $TESTPOOL)
|
||||
|
||||
typeset -i i=0
|
||||
while ((i < 5)); do
|
||||
log_must mkfile $MINVDEVSIZE $mntpnt/vdev$i
|
||||
log_must truncate -s $MINVDEVSIZE $mntpnt/vdev$i
|
||||
eval vdev$i=$mntpnt/vdev$i
|
||||
((i += 1))
|
||||
done
|
||||
|
|
|
|||
|
|
@ -43,6 +43,9 @@ case "${#disk_array[*]}" in
|
|||
1)
|
||||
# We need to repartition the single disk to two slices.
|
||||
if is_linux; then
|
||||
set_device_dir
|
||||
set_slice_prefix
|
||||
PRIMARY_SLICE=1
|
||||
DISK_COUNT=1
|
||||
ZFS_DISK1=${disk_array[0]}
|
||||
ZFS_DISK2=${disk_array[0]}
|
||||
|
|
@ -63,6 +66,7 @@ case "${#disk_array[*]}" in
|
|||
fi
|
||||
else
|
||||
export DEV_DSKDIR="/dev"
|
||||
PRIMARY_SLICE=2
|
||||
DISK_COUNT=1
|
||||
ZFS_DISK1=${disk_array[0]}
|
||||
ZFSSIDE_DISK1=${ZFS_DISK1}s0
|
||||
|
|
@ -73,6 +77,9 @@ case "${#disk_array[*]}" in
|
|||
*)
|
||||
# We need to repartition the single disk to two slices.
|
||||
if is_linux; then
|
||||
set_device_dir
|
||||
set_slice_prefix
|
||||
PRIMARY_SLICE=1
|
||||
DISK_COUNT=2
|
||||
ZFS_DISK1=${disk_array[0]}
|
||||
if is_mpath_device $ZFS_DISK1; then
|
||||
|
|
@ -99,6 +106,7 @@ case "${#disk_array[*]}" in
|
|||
fi
|
||||
else
|
||||
export DEV_DSKDIR="/dev"
|
||||
PRIMARY_SLICE=2
|
||||
DISK_COUNT=2
|
||||
ZFS_DISK1=${disk_array[0]}
|
||||
ZFSSIDE_DISK1=${ZFS_DISK1}s0
|
||||
|
|
|
|||
|
|
@ -123,7 +123,7 @@ function checksum_all #alter_root
|
|||
typeset checksum2
|
||||
|
||||
while (( id < number )); do
|
||||
if (( id == 2 )); then
|
||||
if (( id == $PRIMARY_SLICE )); then
|
||||
(( id = id + 1 ))
|
||||
continue
|
||||
fi
|
||||
|
|
@ -165,12 +165,12 @@ log_must zpool export ${TESTPOOL}-0
|
|||
#
|
||||
number=1
|
||||
while (( number <= $GROUP_NUM )); do
|
||||
if (( number == 2)); then
|
||||
if (( number == $PRIMARY_SLICE)); then
|
||||
(( number = number + 1 ))
|
||||
continue
|
||||
fi
|
||||
|
||||
setup_single_disk "${ZFS_DISK1}s${number}" \
|
||||
setup_single_disk "${ZFS_DISK1}${SLICE_PREFIX}${number}" \
|
||||
"${TESTPOOL}-$number" \
|
||||
"$TESTFS" \
|
||||
"$TESTDIR.$number"
|
||||
|
|
|
|||
|
|
@ -48,6 +48,9 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
https://github.com/zfsonlinux/zfs/issues/6112
|
||||
log_unsupported "Known issue #6112"
|
||||
|
||||
function cleanup
|
||||
{
|
||||
destroy_upgraded_pool $config
|
||||
|
|
|
|||
|
|
@ -46,6 +46,10 @@
|
|||
|
||||
verify_runnable "both"
|
||||
|
||||
if is_32bit; then
|
||||
log_unsupported "Test case occasionally fails on 32-bit systems"
|
||||
fi
|
||||
|
||||
function cleanup
|
||||
{
|
||||
for file in `find $TESTDIR -type f`; do
|
||||
|
|
|
|||
|
|
@ -134,16 +134,3 @@ function is_zvol_dumpified
|
|||
zdb -dddd $volume 2 | grep "dumpsize" > /dev/null 2>&1
|
||||
return $?
|
||||
}
|
||||
|
||||
function is_swap_inuse
|
||||
{
|
||||
typeset device=$1
|
||||
|
||||
if [[ -z $device ]] ; then
|
||||
log_note "No device specified."
|
||||
return 1
|
||||
fi
|
||||
|
||||
swap -l | grep -w $device > /dev/null 2>&1
|
||||
return $?
|
||||
}
|
||||
|
|
|
|||
|
|
@ -34,10 +34,6 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if ! $(is_physical_device $DISKS) ; then
|
||||
log_unsupported "This directory cannot be run on raw files."
|
||||
fi
|
||||
|
||||
default_zvol_setup $DISK $VOLSIZE
|
||||
|
||||
log_pass
|
||||
|
|
|
|||
|
|
@ -45,6 +45,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if ! $(is_physical_device $DISKS) ; then
|
||||
log_unsupported "This directory cannot be run on raw files."
|
||||
fi
|
||||
|
||||
volsize=$(zfs get -H -o value volsize $TESTPOOL/$TESTVOL)
|
||||
|
||||
function cleanup
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@ function cleanup
|
|||
snapexists $TESTPOOL/$TESTVOL@snap && \
|
||||
zfs destroy $TESTPOOL/$TESTVOL@snap
|
||||
|
||||
ismounted $TESTDIR ufs
|
||||
ismounted $TESTDIR $NEWFS_DEFAULT_FS
|
||||
(( $? == 0 )) && log_must umount $TESTDIR
|
||||
|
||||
[[ -e $TESTDIR ]] && rm -rf $TESTDIR
|
||||
|
|
@ -87,11 +87,22 @@ while (( 1 )); do
|
|||
(( fn = fn + 1 ))
|
||||
done
|
||||
|
||||
log_must lockfs -f $TESTDIR
|
||||
log_must zfs snapshot $TESTPOOL/$TESTVOL@snap
|
||||
if is_linux; then
|
||||
EXIT_STATUS=4
|
||||
sync
|
||||
else
|
||||
EXIT_STATUS=39
|
||||
log_must lockfs -f $TESTDIR
|
||||
fi
|
||||
|
||||
$FSCK -n ${ZVOL_RDEVDIR}/$TESTPOOL/$TESTVOL@snap >/dev/null 2>&1
|
||||
log_must zfs set snapdev=visible $TESTPOOL/$TESTVOL
|
||||
log_must zfs snapshot $TESTPOOL/$TESTVOL@snap
|
||||
block_device_wait
|
||||
|
||||
fsck -n ${ZVOL_RDEVDIR}/$TESTPOOL/$TESTVOL@snap >/dev/null 2>&1
|
||||
retval=$?
|
||||
(( $retval == 39 )) || log_fail "$FSCK exited with wrong value $retval "
|
||||
if [[ $retval -ne 0 && $retval -ne $EXIT_STATUS ]]; then
|
||||
log_fail "fsck exited with wrong value $retval "
|
||||
fi
|
||||
|
||||
log_pass "Verify that ZFS volume snapshot could be fscked"
|
||||
|
|
|
|||
|
|
@ -46,6 +46,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if ! $(is_physical_device $DISKS) ; then
|
||||
log_unsupported "This directory cannot be run on raw files."
|
||||
fi
|
||||
|
||||
volsize=$(zfs get -H -o value volsize $TESTPOOL/$TESTVOL)
|
||||
|
||||
function cleanup
|
||||
|
|
|
|||
|
|
@ -45,6 +45,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if ! $(is_physical_device $DISKS) ; then
|
||||
log_unsupported "This directory cannot be run on raw files."
|
||||
fi
|
||||
|
||||
volsize=$(zfs get -H -o value volsize $TESTPOOL/$TESTVOL)
|
||||
|
||||
function cleanup
|
||||
|
|
|
|||
|
|
@ -45,6 +45,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if ! $(is_physical_device $DISKS) ; then
|
||||
log_unsupported "This directory cannot be run on raw files."
|
||||
fi
|
||||
|
||||
volsize=$(zfs get -H -o value volsize $TESTPOOL/$TESTVOL)
|
||||
|
||||
function cleanup
|
||||
|
|
|
|||
|
|
@ -45,6 +45,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if ! $(is_physical_device $DISKS) ; then
|
||||
log_unsupported "This directory cannot be run on raw files."
|
||||
fi
|
||||
|
||||
volsize=$(zfs get -H -o value volsize $TESTPOOL/$TESTVOL)
|
||||
|
||||
function cleanup
|
||||
|
|
|
|||
|
|
@ -35,17 +35,22 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
log_must swapadd
|
||||
if is_linux; then
|
||||
log_must swapon -a
|
||||
else
|
||||
log_must swapadd
|
||||
fi
|
||||
|
||||
for swapdev in $SAVESWAPDEVS
|
||||
do
|
||||
if ! is_swap_inuse $swapdev ; then
|
||||
log_must swap -a $swapdev >/dev/null 2>&1
|
||||
log_must swap_setup $swapdev >/dev/null 2>&1
|
||||
fi
|
||||
done
|
||||
|
||||
voldev=${ZVOL_DEVDIR}/$TESTPOOL/$TESTVOL
|
||||
if is_swap_inuse $voldev ; then
|
||||
log_must swap -d $voldev
|
||||
log_must swap_cleanup $voldev
|
||||
fi
|
||||
|
||||
default_zvol_cleanup
|
||||
|
|
|
|||
|
|
@ -36,8 +36,8 @@
|
|||
verify_runnable "global"
|
||||
|
||||
for i in $SAVESWAPDEVS ; do
|
||||
log_note "Executing: swap -d $i"
|
||||
swap -d $i >/dev/null 2>&1
|
||||
log_note "Executing: swap_cleanup $i"
|
||||
swap_cleanup $i >/dev/null 2>&1
|
||||
if [[ $? != 0 ]]; then
|
||||
log_untested "Unable to delete swap device $i because of" \
|
||||
"insufficient RAM"
|
||||
|
|
|
|||
|
|
@ -33,7 +33,11 @@
|
|||
#
|
||||
# Remember swap devices
|
||||
#
|
||||
SAVESWAPDEVS=$(swap -l | nawk '(NR != 1) {print $1}')
|
||||
if is_linux; then
|
||||
SAVESWAPDEVS=$(swapon -s | nawk '(NR != 1) {print $1}')
|
||||
else
|
||||
SAVESWAPDEVS=$(swap -l | nawk '(NR != 1) {print $1}')
|
||||
fi
|
||||
|
||||
export BLOCKSZ=$(( 1024 * 1024 ))
|
||||
export NUM_WRITES=40
|
||||
|
|
|
|||
|
|
@ -41,17 +41,17 @@
|
|||
# 1. Create a pool
|
||||
# 2. Create a zvol volume
|
||||
# 3. Use zvol as swap space
|
||||
# 4. Create a file under /tmp
|
||||
# 4. Create a file under /var/tmp
|
||||
#
|
||||
|
||||
verify_runnable "global"
|
||||
|
||||
function cleanup
|
||||
{
|
||||
rm -rf /tmp/$TESTFILE
|
||||
rm -rf $TEMPFILE
|
||||
|
||||
if is_swap_inuse $voldev ; then
|
||||
log_must swap -d $voldev
|
||||
log_must swap_cleanup $voldev
|
||||
fi
|
||||
}
|
||||
|
||||
|
|
@ -61,16 +61,15 @@ log_onexit cleanup
|
|||
|
||||
voldev=${ZVOL_DEVDIR}/$TESTPOOL/$TESTVOL
|
||||
log_note "Add zvol volume as swap space"
|
||||
log_must swap -a $voldev
|
||||
log_must swap_setup $voldev
|
||||
|
||||
log_note "Create a file under /tmp"
|
||||
log_must file_write -o create -f /tmp/$TESTFILE \
|
||||
log_note "Create a file under /var/tmp"
|
||||
log_must file_write -o create -f $TEMPFILE \
|
||||
-b $BLOCKSZ -c $NUM_WRITES -d $DATA
|
||||
|
||||
[[ ! -f /tmp/$TESTFILE ]] &&
|
||||
log_fail "Unable to create file under /tmp"
|
||||
[[ ! -f $TEMPFILE ]] && log_fail "Unable to create file under /var/tmp"
|
||||
|
||||
filesize=`ls -l /tmp/$TESTFILE | awk '{print $5}'`
|
||||
filesize=`ls -l $TEMPFILE | awk '{print $5}'`
|
||||
tf_size=$(( BLOCKSZ * NUM_WRITES ))
|
||||
(( $tf_size != $filesize )) &&
|
||||
log_fail "testfile is ($filesize bytes), expected ($tf_size bytes)"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
#!/bin/bash
|
||||
#!/bin/ksh -p
|
||||
#
|
||||
# CDDL HEADER START
|
||||
#
|
||||
|
|
@ -39,16 +39,26 @@
|
|||
#
|
||||
# STRATEGY:
|
||||
# 1. Create a new zvol and add it as swap
|
||||
# 2. Fill /tmp with 80% the size of the zvol
|
||||
# 2. Fill //var/tmp with 80% the size of the zvol
|
||||
# 5. Remove the new zvol, and restore original swap devices
|
||||
#
|
||||
|
||||
verify_runnable "global"
|
||||
log_assert "Using a zvol as swap space, fill /tmp to 80%."
|
||||
|
||||
function cleanup
|
||||
{
|
||||
rm -rf $TEMPFILE
|
||||
|
||||
if is_swap_inuse $swapdev ; then
|
||||
log_must swap_cleanup $swapdev
|
||||
fi
|
||||
}
|
||||
|
||||
log_assert "Using a zvol as swap space, fill /var/tmp to 80%."
|
||||
|
||||
vol=$TESTPOOL/$TESTVOL
|
||||
swapdev=${ZVOL_DEVDIR}/$vol
|
||||
log_must swap -a $swapdev
|
||||
log_must swap_setup $swapdev
|
||||
|
||||
# Get 80% of the number of 512 blocks in the zvol
|
||||
typeset -i count blks volsize=$(get_prop volsize $vol)
|
||||
|
|
@ -57,8 +67,8 @@ typeset -i count blks volsize=$(get_prop volsize $vol)
|
|||
((count = blks / 2048))
|
||||
|
||||
log_note "Fill 80% of swap"
|
||||
log_must dd if=/dev/urandom of=/tmp/$TESTFILE bs=1048576 count=$count
|
||||
log_must rm -f /tmp/$TESTFILE
|
||||
log_must swap -d $swapdev
|
||||
log_must dd if=/dev/urandom of=$TEMPFILE bs=1048576 count=$count
|
||||
log_must rm -f $TEMPFILE
|
||||
log_must swap_cleanup $swapdev
|
||||
|
||||
log_pass "Using a zvol as swap space, fill /tmp to 80%."
|
||||
log_pass "Using a zvol as swap space, fill /var/tmp to 80%."
|
||||
|
|
|
|||
|
|
@ -46,6 +46,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if is_linux; then
|
||||
log_unsupported "Modifies global non-ZFS system config"
|
||||
fi
|
||||
|
||||
function cleanup
|
||||
{
|
||||
[[ -f /tmp/$TESTFILE ]] && log_must rm -f /tmp/$TESTFILE
|
||||
|
|
@ -56,7 +60,7 @@ function cleanup
|
|||
|
||||
log_must swapadd $VFSTAB_FILE
|
||||
|
||||
if is_swap_inuse $voldev ; then
|
||||
if is_swap_inuse $voldev ; then
|
||||
log_must swap -d $voldev
|
||||
fi
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
#!/bin/bash
|
||||
#!/bin/ksh -p
|
||||
#
|
||||
# CDDL HEADER START
|
||||
#
|
||||
|
|
@ -46,7 +46,7 @@ verify_runnable "global"
|
|||
|
||||
function cleanup
|
||||
{
|
||||
is_swap_inuse $swapname && log_must swap -d $swapname
|
||||
is_swap_inuse $swapname && log_must swap_cleanup $swapname
|
||||
datasetexists $vol && log_must zfs destroy $vol
|
||||
}
|
||||
|
||||
|
|
@ -55,20 +55,21 @@ log_assert "For an added swap zvol, (2G <= volsize <= 16G)"
|
|||
log_onexit cleanup
|
||||
|
||||
for vbs in 8192 16384 32768 65536 131072; do
|
||||
for multiplier in 1 32 16384 131072; do
|
||||
for multiplier in 32 16384 131072; do
|
||||
((volsize = vbs * multiplier))
|
||||
vol="$TESTPOOL/vol_$volsize"
|
||||
swapname="${ZVOL_DEVDIR}/$vol"
|
||||
|
||||
# Create a sparse volume to test larger sizes
|
||||
log_must zfs create -s -b $vbs -V $volsize $vol
|
||||
log_must swap -a $swapname
|
||||
block_device_wait
|
||||
log_must swap_setup $swapname
|
||||
|
||||
new_volsize=$(get_prop volsize $vol)
|
||||
[[ $volsize -eq $new_volsize ]] || log_fail "$volsize $new_volsize"
|
||||
|
||||
log_must swap -d $swapname
|
||||
log_must zfs destroy $vol
|
||||
log_must swap_cleanup $swapname
|
||||
log_must_busy zfs destroy $vol
|
||||
done
|
||||
done
|
||||
|
||||
|
|
|
|||
|
|
@ -44,6 +44,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if is_linux; then
|
||||
log_unsupported "swaplow + swaplen unsupported Linux options"
|
||||
fi
|
||||
|
||||
assertion="Verify the sum of swaplow and swaplen is less or equal to volsize"
|
||||
log_assert $assertion
|
||||
|
||||
|
|
|
|||
|
|
@ -45,6 +45,10 @@
|
|||
|
||||
verify_runnable "global"
|
||||
|
||||
if is_linux; then
|
||||
log_unsupported "swaplow + swaplen unsupported Linux options"
|
||||
fi
|
||||
|
||||
function cleanup
|
||||
{
|
||||
typeset -i i=0
|
||||
|
|
|
|||
Loading…
Reference in New Issue