Commit Graph

980 Commits

Author SHA1 Message Date
Tony Nguyen 477edd642c Run arc_evict thread at higher priority
Run arc_evict thread at higher priority, nice=0, to give it more CPU
time which can improve performance for workload with high ARC evict
activities.

On mixed read/write and sequential read workloads, I've seen between
10-40% better performance.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com>
Closes #12397
2021-09-14 14:30:13 -07:00
Alexander Motin 32c0b6468c Optimize allocation throttling
Remove mc_lock use from metaslab_class_throttle_*().  The math there
is based on refcounts and so atomic, so the only race possible there
is between zfs_refcount_count() and zfs_refcount_add().  But in most
cases metaslab_class_throttle_reserve() is called with the allocator
lock held, which covers the race.  In cases where the lock is not
held, GANG_ALLOCATION() or METASLAB_MUST_RESERVE are set, and so we
do not use zfs_refcount_count().  And even if we assume some other
non-existing scenario, the worst that may happen from this race is
few more I/Os get to allocation earlier, that is not a problem.

Move locks and data of different allocators into different cache
lines to avoid false sharing.  Group spa_alloc_* arrays together
into single array of aligned struct spa_alloc spa_allocs.  Align
struct metaslab_class_allocator.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12314
2021-09-14 12:40:15 -07:00
Alexander Motin 6a49948c73 Minor ARC optimizations
Remove unneeded global, practically constant, state pointer variables
(arc_anon, arc_mru, etc.), replacing them with macros of real state
variables addresses (&ARC_anon, &ARC_mru, etc.).

Change ARC_EVICT_ALL from -1ULL to UINT64_MAX, not requiring special
handling in inner loop of ARC reclamation.  Respectively change bytes
argument of arc_evict_state() from int64_t to uint64_t.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12348
2021-09-14 12:39:48 -07:00
Alexander 4affa09f3e A few fixes of callback typecasting (for the upcoming ClangCFI)
* zio: avoid callback typecasting
* zil: avoid zil_itxg_clean() callback typecasting
* zpl: decouple zpl_readpage() into two separate callbacks
* nvpair: explicitly declare callbacks for xdr_array()
* linux/zfs_nvops: don't use external iput() as a callback
* zcp_synctask: don't use fnvlist_free() as a callback
* zvol: don't use ops->zv_free() as a callback for taskq_dispatch()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes #12260
2021-09-14 12:39:48 -07:00
Alexander Motin ba76bb30a6 Introduce dsl_dir_diduse_transfer_space()
Most of dsl_dir_diduse_space() and dsl_dir_transfer_space() CPU time
is a dd_lock overhead and time spent in dmu_buf_will_dirty(). Calling
them one after another is a waste of time and even more contention.
Doing that twice for each rewritten block within dbuf_write_done()
via dsl_dataset_block_kill() and dsl_dataset_block_born() created one
of the biggest CPU overheads in case of small blocks rewrite.

dsl_dir_diduse_transfer_space() combines functionality of these two
functions for cases where it is needed, but without double overhead,
practically for the cost of dsl_dir_diduse_space() or even cheaper.

While there, optimize dsl_dir_phys() calls in dsl_dir_diduse_space()
and dsl_dir_transfer_space().  It seems Clang detects some aliasing
there, repeating dd->dd_dbuf->db_data dereference multiple times,
increasing dd_lock scope and contention.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Author: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12300
2021-09-14 12:38:51 -07:00
Alexander Motin 45305a067f Fix ARC ghost states eviction accounting
arc_evict_hdr() returns number of evicted bytes in scope of specific
state.  For ghost states it does not mean the amount of really freed
memory, but the logical buffer size.  It is correct for the eviction
process, but not for waking up threads waiting for ARC size reduction,
as added in "Revise ARC shrinker algorithm" commit, causing premature
wakeups while ARC is still overflowed, allowing even bigger overflow,
plus processing overhead when next allocation will also get blocked,
probably also for too short time.

To fix that make arc_evict_hdr() also return the amount of really
freed memory, which for the ghost states is only the header, and use
it to update arc_evict_count instead.  Originally I was thinking to
not return it at all, since arc_get_data_impl() does not account for
the headers, but decided that some slow allocation progress is better
than long waits, reaching on my tests up to 100ms.

To reduce negative latency effects of long time periods when reclaim
thread can free little real memory, start reclamation process earlier,
before we actually reached the overflow threshold, when we have to
throttle new allocations.  We can also do it without taking global
arc_evict_lock, reducing the contention.

Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12279
2021-09-14 12:38:05 -07:00
George Wilson 8415c3c170 file reference counts can get corrupted
Callers of zfs_file_get and zfs_file_put can corrupt the reference
counts for the file structure resulting in a panic or a soft lockup.
When zfs send/recv runs, it will add a reference count to the
open file, and begin to send or recv the stream. If the file descriptor
is closed, then when dmu_recv_stream() or dmu_send() return we will
call zfs_file_put to remove the reference we placed on the file
structure. Unfortunately, because zfs_file_put() uses the file
descriptor to lookup the file structure, it may end up finding that
the file descriptor table no longer contains the file struct, thus
leaking the file structure. Or it might end up finding a file
descriptor for a different file and blindly updating its reference
counts. Other failure modes probably exists.

This change reworks the zfs_file_[get|put] interface to not rely
on the file descriptor but instead pass the zfs_file_t pointer around.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
External-issue: DLPX-76119
Closes #12299
2021-09-14 12:37:38 -07:00
Jorgen Lundman 04ebe29188 dprintf_dnode: strcpy -> strlcpy
Missed a couple of strcpy() in earlier commit, this is only used with
--enable-debug.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #12311
2021-09-14 12:37:38 -07:00
Alexander Motin 49bb454120 FreeBSD: Hardcode abd_chunk_size to PAGE_SIZE
It makes no sense to set it below PAGE_SIZE, since it increases all
overheads and makes returning memory to OS problematic.  It makes no
sense to set it above PAGE_SIZE, since such allocations and especially
frees are too expensive and cause KVA fragmentation to benefit from
fewer chunks.  After that it makes no sense to keep more complicated
math here.

What may have sense though is just a tunable border between linear and
scatter ABDs, previously also controlled by this tunable.  Retain that
functionality by taking abd_scatter_min_size tunable from Linux, just
with different default value.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12328
2021-09-14 12:36:44 -07:00
Alexander Motin 15177c1aac Compact dbuf/buf hashes and lock arrays
With default dbuf cache size of 1/32 of ARC, it makes no sense to have
hash table of the same size (or even bigger on Linux).  Reduce it to
1/8 of ARC's one, still leaving some slack, assuming higher I/O rate
via dbuf cache than via ARC.

Remove padding from ARC hash locks array.  The idea behind padding
is to avoid false sharing between locks.  It would have sense if
there would be a limited number of very busy locks.  But since we
have no limit on the number, using the same memory for more locks we
can achieve even lower lock contention with the same false sharing,
or we can use less memory for the same contention level.

Reduce number of hash locks from 8192 to 2048.  The number is still
big enough to not cause contention, but reduced memory size improves
cache hit rate for mutex_tryenter() in ARC eviction thread, saving
about 1% of the thread time.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12289
2021-09-14 12:22:46 -07:00
Jorgen Lundman 035219ee10 Fix abd leak, kmem_free correct size of abd_t
Fix a leak of abd_t that manifested mostly when using
raidzN with at least as many columns as N (e.g. a
four-disk raidz2 but not a three-disk raidz2).
Sufficiently heavy raidz use would eventually run a system
out of memory.

Additionally:

* Switch abd_cache arena to FIRSTFIT, which empirically
improves perofrmance.

* Make abd_chunk_cache more performant and debuggable.

* Allocate the abd_zero_buf from abd_chunk_cache rather
than the heap.

* Don't try to reap non-existent qcaches in abd_cache arena.

* KM_PUSHPAGE->KM_SLEEP when allocating chunks from their
own arena

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Co-authored-by: Sean Doran <smd@use.net>
Closes #12295
2021-09-14 12:22:28 -07:00
Alexander Motin f3969ea78b Optimize small random numbers generation
In all places except two spa_get_random() is used for small values,
and the consumers do not require well seeded high quality values.
Switch those two exceptions directly to random_get_pseudo_bytes()
and optimize spa_get_random(), renaming it to random_in_range(),
since it is not related to SPA or ZFS in general.

On FreeBSD directly map random_in_range() to new prng32_bounded() KPI
added in FreeBSD 13.  On Linux and in user-space just reduce the type
used to uint32_t to avoid more expensive 64bit division.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12183
2021-09-14 12:10:17 -07:00
Attila Fülöp 088712793e gcc 11 cleanup
Compiling with gcc 11.1.0 produces three new warnings.
Change the code slightly to avoid them.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #12130
Closes #12188
Closes #12237
2021-06-24 13:13:40 -07:00
Rich Ercolani 5e89181544 Annotated dprintf as printf-like
ZFS loves using %llu for uint64_t, but that requires a cast to not 
be noisy - which is even done in many, though not all, places.
Also a couple places used %u for uint64_t, which were promoted
to %llu. 

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12233
2021-06-24 13:12:36 -07:00
Alexander Motin 6b239d1757 Use wmsum for arc, abd, dbuf and zfetch statistics. (#12172)
wmsum was designed exactly for cases like these with many updates
and rare reads.  It allows to completely avoid atomic operations on
congested global variables.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12172
2021-06-24 13:10:59 -07:00
Alexander Motin 57196f8ae9 Re-embed multilist_t storage
This commit partially reverts changes to multilists in PR 7968
(multi-threaded spa-sync()) and adds some cache line alignments to
separate read-only multilists and heavily modified refcount's to
different cache lines.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-by: iXsystems, Inc.
Closes #12158
2021-06-10 10:50:16 -07:00
Alexander Motin efdfb14fc8 Remove pool io kstats
This mostly reverts "3537 want pool io kstats" commit of 8 years ago.

From one side this code using pool-wide locks became pretty bad for
performance, creating significant lock contention in I/O pipeline.
From another, there are more efficient ways now to obtain detailed
statistics, while this statistics is illumos-specific and much less
usable on Linux and FreeBSD, reported only via procfs/sysctls.

This commit does not remove KSTAT_TYPE_IO implementation, that may
be removed later together with already unused KSTAT_TYPE_INTR and
KSTAT_TYPE_TIMER.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12212
2021-06-10 10:50:16 -07:00
Alan Somers 2c3d7283b4 libzfs: On FreeBSD, use MNT_NOWAIT with getfsstat
`getfsstat(2)` is used to retrieve the list of mounted file systems,
which libzfs uses when fetching properties like mountpoint, atime,
setuid, etc.  The `mode` parameter may be `MNT_NOWAIT`, which uses
information in the VFS's cache, or `MNT_WAIT`, which effectively does a
`statfs` on every single mounted file system in order to fetch the most
up-to-date information.  As far as I can tell, the only fields that
libzfs cares about are the filesystem's name, mountpoint, fstypename,
and mount flags.  Those things are always updated on mount and unmount,
so they will always be accurate in the VFS's mount cache except in two
circumstances:

1) When a file system is busy unmounting
2) When a ZFS file system changes the value of a mount-overridable
   property like atime or setuid, but doesn't remount the file system.
   Right now that only happens when the property is changed by an
   unprivileged user who has delegated authority to change the property
   but not to mount the dataset.  But perhaps libzfs could choose to do
   it for other reasons in the future.

Switching to `MNT_NOWAIT` will greatly improve speed with no downside,
as long as we explicitly update the mount cache whenever we change a
mount-overridable property.

For comparison, Illumos gets this information using the native
`getmntany` and `getmntent` functions, which also use cached
information.  The illumos function that would refresh the cache,
`resetmnttab`, is never called by libzfs.

And on GNU/Linux, `getmntany` and `getmntent` don't even communicate
with the kernel directly.  They simply parse the file they are given,
which is usually /etc/mtab or /proc/mounts.  Perhaps the implementation
of /proc/mounts is synchronous, ala MNT_WAIT; I don't know.

Sponsored-by:	Axcient
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alan Somers <asomers@gmail.com>
Closes: #12091
2021-06-09 13:05:34 -07:00
Alexander Motin e76373de7b More aggsum optimizations
- Avoid atomic_add() when updating as_lower_bound/as_upper_bound.
Previous code was excessively strong on 64bit systems while not
strong enough on 32bit ones.  Instead introduce and use real
atomic_load() and atomic_store() operations, just an assignments
on 64bit machines, but using proper atomics on 32bit ones to avoid
torn reads/writes.

 - Reduce number of buckets on large systems.  Extra buckets not as
much improve add speed, as hurt reads.  Unlike wmsum for aggsum
reads are still important.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12145
2021-06-09 13:05:34 -07:00
Alexander Motin 85c43508f3 Introduce write-mostly sums
wmsum counters are a reduced version of aggsum counters, optimized for
write-mostly scenarios.  They do not provide optimized read functions,
but instead allow much cheaper add function.  The primary usage is
infrequently read statistic counters, not requiring exact precision.

The Linux implementation is directly mapped into percpu_counter KPI.
The FreeBSD implementation is directly mapped into counter(9) KPI.
In user-space due to lack of better implementation mapped to aggsum.

Unfortunately neither Linux percpu_counter nor FreeBSD counter(9)
provide sufficient functionality to completelly replace aggsum, so
it still remains to be used for several hot counters.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12114
2021-06-09 13:05:34 -07:00
Brian Behlendorf 33a06f27e6 Fix dRAID sequential resilver silent damage handling
This change addresses two distinct scenarios which are possible
when performing a sequential resilver to a dRAID pool with vdevs
that contain silent unknown damage. Which in this circumstance
took the form of the devices being intentionally overwritten with
zeros. However, it could also result from a device returning incorrect
data while a sequential resilver was in progress.

Scenario 1) A sequential resilver is performed while all of the
dRAID vdevs are ONLINE and there is silent damage present on the
vdev being resilvered. In this case, nothing will be repaired
by vdev_raidz_io_done_reconstruct_known_missing() because
rc->rc_error isn't set on any of the raid columns. To address
this vdev_draid_io_start_read() has been updated to always mark
the resilvering column as ESTALE for sequential resilver IO.

Scenario 2) Multiple columns contain silent damage for the same
block and a sequential resilver is performed. In this case it's
impossible to generate the correct data from parity unless all of
the damaged columns are being sequentially resilvered (and thus
only good data is used to generate parity). This is as expected
and there's nothing which can be done about it. However, we need
to be careful not to make to situation worse. Since we can't
verify the data is actually good without a checksum, we must
only repair the devices which are being sequentially resilvered.
Otherwise, an incorrect repair to a device which previously
contained good data could effectively lock in the damage and
make reconstruction impossible. A check for this was added to
vdev_raidz_io_done_verified() along with a new test case.

Lastly, this change updates the redundancy_draid_spare1 and
redundancy_draid_spare3 test cases to be more representative
of normal dRAID replacement operation.  Specifically, what we
care about is that the scrub run after a sequential resilver
does not find additional blocks which need repair.  This would
indicate the sequential resilver failed to rebuild a section of
one of the devices. Note also the tests were switched to using
the verify_pool() function which still checks for checksum errors.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12061
2021-05-27 22:31:56 -07:00
наб 1cb517aebd module/zfs: remove zfs_zevent_console and zfs_zevent_cols
zfs_zevent_console committed multiple printk()s per line without
properly continuing them ‒ a single event could easily be fragmented
across over thirty lines, making it useless for direct application

zfs_zevent_cols exists purely to wrap the output from zfs_zevent_console

The niche this was supposed to fill can be better served by something
akin to the all-syslog ZEDLET

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #7082 
Closes #11996
2021-05-27 22:09:19 -07:00
наб 2453d0263d lib/: set O_CLOEXEC on all fds
As found by
  git grep -E '(open|setmntent|pipe2?)\(' |
    grep -vE '((zfs|zpool)_|fd|dl|lzc_re|pidfile_|g_)open\('

FreeBSD's pidfile_open() says nothing about the flags of the files it
opens, but we can't do anything about it anyway; the implementation does
open all files with O_CLOEXEC

Consider this output with zpool.d/media appended with
"pid=$$; (ls -l /proc/$pid/fd > /dev/tty)":
  $ /sbin/zpool iostat -vc media
  lrwx------ 0 -> /dev/pts/0
  l-wx------ 1 -> 'pipe:[3278500]'
  l-wx------ 2 -> /dev/null
  lrwx------ 3 -> /dev/zfs
  lr-x------ 4 -> /proc/31895/mounts
  lrwx------ 5 -> /dev/zfs
  lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media
vs
  $ ./zpool iostat -vc vendor,upath,iostat,media
  lrwx------ 0 -> /dev/pts/0
  l-wx------ 1 -> 'pipe:[3279887]'
  l-wx------ 2 -> /dev/null
  lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11866
2021-04-14 13:23:07 -07:00
Brian Behlendorf f17d146ca6 Use dsl_scan_setup_check() to setup a scrub
When a rebuild completes it will automatically schedule a follow up
scrub to verify all of the block checksums.  Before setting up the
scrub execute the counterpart dsl_scan_setup_check() function to
confirm the scrub can be started.  Prior to this change we'd only
check vdev_rebuild_active() which isn't as comprehensive, and using
the check function keeps all of this logic in one place.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11849
2021-04-14 13:19:49 -07:00
Ryan Moeller 7822c01eb6 Ratelimit deadman zevents as with delay zevents
Just as delay zevents can flood the zevent pipe when a vdev becomes
unresponsive, so do the deadman zevents.

Ratelimit deadman zevents according to the same tunable as for delay
zevents.

Enable deadman tests on FreeBSD and add a test for deadman event
ratelimiting. 

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11786
2021-04-14 13:19:49 -07:00
Andrea Gelmini ca7af7f675 Fix various typos
Correct an assortment of typos throughout the code base.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #11774
2021-04-07 13:27:11 -07:00
Matthew Ahrens 2b56a63457
Use a helper function to clarify gang block size
For gang blocks, `DVA_GET_ASIZE()` is the total space allocated for the
gang DVA including its children BP's.  The space allocated at each DVA's
vdev/offset is `vdev_psize_to_asize(vd, SPA_GANGBLOCKSIZE)`.

This commit makes this relationship more clear by using a helper
function, `vdev_gang_header_asize()`, for the space allocated at the
gang block's vdev/offset.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11744
2021-03-26 11:19:35 -07:00
Andrea Gelmini 8a915ba1f6
Removed duplicated includes
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #11775
2021-03-22 12:34:58 -07:00
Alexander Motin 891568c990
Split dmu_zfetch() speculation and execution parts
To make better predictions on parallel workloads dmu_zfetch() should
be called as early as possible to reduce possible request reordering.
In particular, it should be called before dmu_buf_hold_array_by_dnode()
calls dbuf_hold(), which may sleep waiting for indirect blocks, waking
up multiple threads same time on completion, that can significantly
reorder the requests, making the stream look like random.  But we
should not issue prefetch requests before the on-demand ones, since
they may get to the disks first despite the I/O scheduler, increasing
on-demand request latency.

This patch splits dmu_zfetch() into two functions: dmu_zfetch_prepare()
and dmu_zfetch_run().  The first can be executed as early as needed.
It only updates statistics and makes predictions without issuing any
I/Os.  The I/O issuance is handled by dmu_zfetch_run(), which can be
called later when all on-demand I/Os are already issued.  It even
tracks the activity of other concurrent threads, issuing the prefetch
only when _all_ on-demand requests are issued.

For many years it was a big problem for storage servers, handling
deeper request queues from their clients, having to either serialize
consequential reads to make ZFS prefetcher usable, or execute the
incoming requests as-is and get almost no prefetch from ZFS, relying
only on deep enough prefetch by the clients.  Benefits of those ways
varied, but neither was perfect.  With this patch deeper queue
sequential read benchmarks with CrystalDiskMark from Windows via
iSCSI to FreeBSD target show me much better throughput with almost
100% prefetcher hit rate, comparing to almost zero before.

While there, I also removed per-stream zs_lock as useless, completely
covered by parent zf_lock.  Also I reused zs_blocks refcount to track
zf_stream linkage of the stream, since I believe previous zs_fetch ==
NULL check in dmu_zfetch_stream_done() was racy.

Delete prefetch streams when they reach ends of files.  It saves up
to 1KB of RAM per file, plus reduces searches through the stream list.

Block data prefetch (speculation and indirect block prefetch is still
done since they are cheaper) if all dbufs of the stream are already
in DMU cache.  First cache miss immediately fires all the prefetch
that would be done for the stream by that time.  It saves some CPU
time if same files within DMU cache capacity are read over and over.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #11652
2021-03-19 22:56:11 -07:00
Chunwei Chen 296a4a369b
Fix zfs_get_data access to files with wrong generation
If TX_WRITE is create on a file, and the file is later deleted and a new
directory is created on the same object id, it is possible that when
zil_commit happens, zfs_get_data will be called on the new directory.
This may result in panic as it tries to do range lock.

This patch fixes this issue by record the generation number during
zfs_log_write, so zfs_get_data can check if the object is valid.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #10593
Closes #11682
2021-03-19 22:53:31 -07:00
Matthew Ahrens 330c6c0523
Clean up RAIDZ/DRAID ereport code
The RAIDZ and DRAID code is responsible for reporting checksum errors on
their child vdevs.  Checksum errors represent events where a disk
returned data or parity that should have been correct, but was not.  In
other words, these are instances of silent data corruption.  The
checksum errors show up in the vdev stats (and thus `zpool status`'s
CKSUM column), and in the event log (`zpool events`).

Note, this is in contrast with the more common "noisy" errors where a
disk goes offline, in which case ZFS knows that the disk is bad and
doesn't try to read it, or the device returns an error on the requested
read or write operation.

RAIDZ/DRAID generate checksum errors via three code paths:

1. When RAIDZ/DRAID reconstructs a damaged block, checksum errors are
reported on any children whose data was not used during the
reconstruction.  This is handled in `raidz_reconstruct()`.  This is the
most common type of RAIDZ/DRAID checksum error.

2. When RAIDZ/DRAID is not able to reconstruct a damaged block, that
means that the data has been lost.  The zio fails and an error is
returned to the consumer (e.g. the read(2) system call).  This would
happen if, for example, three different disks in a RAIDZ2 group are
silently damaged.  Since the damage is silent, it isn't possible to know
which three disks are damaged, so a checksum error is reported against
every child that returned data or parity for this read.  (For DRAID,
typically only one "group" of children is involved in each io.)  This
case is handled in `vdev_raidz_cksum_finish()`. This is the next most
common type of RAIDZ/DRAID checksum error.

3. If RAIDZ/DRAID is not able to reconstruct a damaged block (like in
case 2), but there happens to be additional copies of this block due to
"ditto blocks" (i.e. multiple DVA's in this blkptr_t), and one of those
copies is good, then RAIDZ/DRAID compares each sector of the data or
parity that it retrieved with the good data from the other DVA, and if
they differ then it reports a checksum error on this child.  This
differs from case 2 in that the checksum error is reported on only the
subset of children that actually have bad data or parity.  This case
happens very rarely, since normally only metadata has ditto blocks.  If
the silent damage is extensive, there will be many instances of case 2,
and the pool will likely be unrecoverable.

The code for handling case 3 is considerably more complicated than the
other cases, for two reasons:

1. It needs to run after the main raidz read logic has completed.  The
data RAIDZ read needs to be preserved until after the alternate DVA has
been read, which necessitates refcounts and callbacks managed by the
non-raidz-specific zio layer.

2. It's nontrivial to map the sections of data read by RAIDZ to the
correct data.  For example, the correct data does not include the parity
information, so the parity must be recalculated based on the correct
data, and then compared to the parity that was read from the RAIDZ
children.

Due to the complexity of case 3, the rareness of hitting it, and the
minimal benefit it provides above case 2, this commit removes the code
for case 3.  These types of errors will now be handled the same as case
2, i.e. the checksum error will be reported against all children that
returned data or parity.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11735
2021-03-19 16:22:10 -07:00
Matthew Ahrens 46df6e98aa
Remove unused rr_code
The `rr_code` field in `raidz_row_t` is unused.

This commit removes the field, as well as the code that's used to set
it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11736
2021-03-17 21:57:09 -07:00
Ryan Moeller f845b2dd1c
FreeBSD: Clean up zfsdev_close to match Linux
Resolve some oddities in zfsdev_close() which could result in a
panic and were not present in the equivalent function for Linux.

- Remove unused definition ZFS_MIN_MINOR
- FreeBSD: Simplify zfsdev state destruction
- Assert zs_minor is valid in zfsdev_close
- Make locking around zfsdev state match Linux

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11720
2021-03-12 16:09:15 -08:00
Brian Behlendorf e7a06356c1
Suppress cppcheck invalidSyntax warninigs
For some reason cppcheck 1.90 is generating an invalidSyntax warning
when the BF64_SET macro is used in the zstream source.  The same
warning is not reported by cppcheck 2.3, nor is their any evident
problem with the expanded macro.  This appears to be an issue with
this version of cppcheck.  This commit annotates the source to suppress
the warning.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11700
2021-03-05 17:56:35 -08:00
Prakash Surya f01eaed455
Add upper bound for slop space calculation
This change modifies the behavior of how we determine how much slop
space to use in the pool, such that now it has an upper limit. The
default upper limit is 128G, but is configurable via a tunable.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #11023
2021-02-24 09:52:43 -08:00
Brian Atkinson c0801bf35a
Cleaning up uio headers
Making uio_impl.h the common header interface between Linux and FreeBSD
so both OS's can share a common header file. This also helps reduce code
duplication for zfs_uio_t for each OS.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #11622
2021-02-20 20:16:50 -08:00
Christian Schwarz edc508ac0b libzpool: set_global_var: refactor to not modify 'arg'
Also fixes leak of the dlopen handle in the error case.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #11602
2021-02-19 22:45:04 -08:00
Ryan Moeller 64e0fe14ff
Restore FreeBSD resource usage accounting
Add zfs_racct_* interfaces for platform-dependent read/write accounting.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11613
2021-02-19 22:34:33 -08:00
Don Brady 03e02e5b56
Checksum errors may not be counted
Fix regression seen in issue #11545 where checksum errors 
where not being counted or showing up in a zpool event.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #11609
2021-02-19 22:33:15 -08:00
Colm 658fb8020f
Add "compatibility" property for zpool feature sets
Property to allow sets of features to be specified; for compatibility
with specific versions / releases / external systems. Influences
the behavior of 'zpool upgrade' and 'zpool create'. Initial man
page changes and test cases included.

Brief synopsis:

zpool create -o compatibility=off|legacy|file[,file...] pool vdev...

compatibility = off : disable compatibility mode (enable all features)
compatibility = legacy : request that no features be enabled
compatibility = file[,file...] : read features from specified files.
Only features present in *all* files will be enabled on the
resulting pool. Filenames may be absolute, or relative to
/etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc
checked first).

Only affects zpool create, zpool upgrade and zpool status.

ABI changes in libzfs:

* New function "zpool_load_compat" to load and parse compat sets.
* Add "zpool_compat_status_t" typedef for compatibility parse status.
* Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum
* Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum

An initial set of base compatibility sets are included in
cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is
modified to install these in $pkgdatadir/compatibility.d and to
create symbolic links to a reasonable set of aliases.

Reviewed-by: ericloewe
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #11468
2021-02-17 21:30:45 -08:00
Ryan Moeller 436ab35a53
Make inline ABD predicates compatible with C++
FreeBSD's zfsd fails to build after e2af2acce3 due to strict type
checking errors from the implicit conversion between bool and boolean_t
in the inline predicate definitions in abd.h.

Use conditionals to return the correct value type from these functions.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #11592
2021-02-15 10:15:50 -08:00
khng300 fc273894d2
Rename zfs_inode_update to zfs_znode_update_vfs
zfs_znode_update_vfs is a more platform-agnostic name than
zfs_inode_update. Besides that, the function's prototype is moved to
include/sys/zfs_znode.h as the function is also used in common code.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ka Ho Ng <khng300@gmail.com>
Sponsored by: The FreeBSD Foundation
Closes #11580
2021-02-09 11:17:29 -08:00
Matthew Ahrens 2d4bbd14fc
The abd child/parent relationship does not need to be tracked
ABD's currently track their parent/child relationship.  This applies to
`abd_get_offset()` and `abd_borrow_buf()`.  However, nothing depends on
knowing this relationship, it's only used for consistency checks to
verify that we are not destroying an ABD that's still in use.  When we
are creating/destroying ABD's frequently, the performance impact of
maintaining these data structures (in particular the atomic
increment/decrement operations) can be measurable.

This commit removes this verification code on production builds, but
keeps it when ZFS_DEBUG is set.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11535
2021-01-30 10:04:42 -08:00
Alan Somers cf0977ad72 Parallelize vdev_validate
The runtime of vdev_validate is dominated by the disk accesses in
vdev_label_read_config.  Speed it up by validating all vdevs in
parallel using a taskq.

Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11470
2021-01-26 19:36:51 -08:00
Alan Somers a0e01997ec Parallelize vdev_load
metaslab_init is the slowest part of importing a mature pool, and it
must be repeated hundreds of times for each top-level vdev.  But its
speed is dominated by a few serialized disk accesses.  That can lead to
import times of > 1 hour for pools with many top-level vdevs on spinny
disks.

Speed up the import by using a taskqueue to parallelize vdev_load across
all top-level vdevs.

This also requires adding mutex protection to
metaslab_class_t.mc_historgram.  The mc_histogram fields were
unprotected when that code was first written in "Illumos 4976-4984 -
metaslab improvements" (OpenZFS
f3a7f6610f).  The lock wasn't added until
3dfb57a35e, though it's unclear exactly
which fields it's supposed to protect.  In any case, it wasn't until
vdev_load was parallelized that any code attempted concurrent access to
those fields.

Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11470
2021-01-26 19:35:59 -08:00
Matthew Ahrens aa755b3549
Set aside a metaslab for ZIL blocks
Mixing ZIL and normal allocations has several problems:

1. The ZIL allocations are allocated, written to disk, and then a few
seconds later freed.  This leaves behind holes (free segments) where the
ZIL blocks used to be, which increases fragmentation, which negatively
impacts performance.

2. When under moderate load, ZIL allocations are of 128KB.  If the pool
is fairly fragmented, there may not be many free chunks of that size.
This causes ZFS to load more metaslabs to locate free segments of 128KB
or more.  The loading happens synchronously (from zil_commit()), and can
take around a second even if the metaslab's spacemap is cached in the
ARC.  All concurrent synchronous operations on this filesystem must wait
while the metaslab is loading.  This can cause a significant performance
impact.

3. If the pool is very fragmented, there may be zero free chunks of
128KB or more.  In this case, the ZIL falls back to txg_wait_synced(),
which has an enormous performance impact.

These problems can be eliminated by using a dedicated log device
("slog"), even one with the same performance characteristics as the
normal devices.

This change sets aside one metaslab from each top-level vdev that is
preferentially used for ZIL allocations (vdev_log_mg,
spa_embedded_log_class).  From an allocation perspective, this is
similar to having a dedicated log device, and it eliminates the
above-mentioned performance problems.

Log (ZIL) blocks can be allocated from the following locations.  Each
one is tried in order until the allocation succeeds:
1. dedicated log vdevs, aka "slog" (spa_log_class)
2. embedded slog metaslabs (spa_embedded_log_class)
3. other metaslabs in normal vdevs (spa_normal_class)

The space required for the embedded slog metaslabs is usually between
0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop"
space that is not available for user data.

On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity,
and recordsize=8k, testing shows a ~50% performance increase on random
8k sync writes.  On even more fragmented systems (which hit problem #3
above and call txg_wait_synced()), the performance improvement can be
arbitrarily large (>100x).

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11389
2021-01-21 15:12:54 -08:00
Brian Atkinson d0cd9a5cc6
Extending FreeBSD UIO Struct
In FreeBSD the struct uio was just a typedef to uio_t. In order to
extend this struct, outside of the definition for the struct uio, the
struct uio has been embedded inside of a uio_t struct.

Also renamed all the uio_* interfaces to be zfs_uio_* to make it clear
this is a ZFS interface.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #11438
2021-01-20 21:27:30 -08:00
Matthew Ahrens e2af2acce3
allow callers to allocate and provide the abd_t struct
The `abd_get_offset_*()` routines create an abd_t that references
another abd_t, and doesn't allocate any pages/buffers of its own.  In
some workloads, these routines may be called frequently, to create many
abd_t's representing small pieces of a single large abd_t.  In
particular, the upcoming RAIDZ Expansion project makes heavy use of
these routines.

This commit adds the ability for the caller to allocate and provide the
abd_t struct to a variant of `abd_get_offset_*()`.  This eliminates the
cost of allocating the abd_t and performing the accounting associated
with it (`abdstat_struct_size`).  The RAIDZ/DRAID code uses this for
the `rc_abd`, which references the zio's abd.  The upcoming RAIDZ
Expansion project will leverage this infrastructure to increase
performance of reads post-expansion by around 50%.

Additionally, some of the interfaces around creating and destroying
abd_t's are cleaned up.  Most significantly, the distinction between
`abd_put()` and `abd_free()` is eliminated; all types of abd_t's are
now disposed of with `abd_free()`.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Issue #8853 
Closes #11439
2021-01-20 11:24:37 -08:00
Matthew Ahrens 2ac90457f5
record ioctl elapsed time in zpool history
Each zfs ioctl that changes on-disk state (e.g. set property, create
snapshot, destroy filesystem) is recorded in the zpool history, and is
printed by `zpool history -i`.

For performance diagnostic purposes, it would be useful to know how long
each of these ioctls took to run.  This commit adds that functionality,
with a new `ZPOOL_HIST_ELAPSED_NS` member of the history nvlist.

Additionally, the time recorded in this history log is currently the
time that the history record is written to disk.  But in many cases (CLI
args logging and ioctl logging), this happens asynchronously,
potentially many seconds after the operation completed.  This commit
changes the timestamp to reflect when the history event was created,
rather than when it was written to disk.

Reviewed-by: Mark Maybee <mmaybee@cray.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11440
2021-01-11 09:29:25 -08:00
Toomas Soome 40ab927ae8
implicit conversion from 'boolean_t' to 'ds_hold_flags_t'
Build error on illumos with gcc 10 did reveal:

In function 'dmu_objset_refresh_ownership':
../../common/fs/zfs/dmu_objset.c:857:25: error: implicit conversion
from 'boolean_t' to 'ds_hold_flags_t' {aka 'enum ds_hold_flags'}
[-Werror=enum-conversion]
      857 |  dsl_dataset_disown(ds, decrypt, tag);
          |                         ^~~~~~~
cc1: all warnings being treated as errors

libzfs_input_check.c: In function 'zfs_ioc_input_tests':
libzfs_input_check.c:754:28: error: implicit conversion from
'enum dmu_objset_type' to 'enum lzc_dataset_type'
[-Werror=enum-conversion]
  754 |  err = lzc_create(dataset, DMU_OST_ZFS, NULL, NULL, 0);
      |                            ^~~~~~~~~~~
cc1: all warnings being treated as errors

The same issue is present in openzfs, and also the same issue about
ds_hold_flags_t, which currently defines exactly one valid value.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes #11406
2020-12-27 16:31:02 -08:00