Commit Graph

592 Commits

Author SHA1 Message Date
Tom Caputi 369aa501d1 Fix handling of maxblkid for raw sends
Currently, the receive code can create an unreadable dataset from
a correct raw send stream. This is because it is currently
impossible to set maxblkid to a lower value without freeing the
associated object. This means truncating files on the send side
to a non-0 size could result in corruption. This patch solves this
issue by adding a new 'force' flag to dnode_new_blkid() which will
allow the raw receive code to force the DMU to accept the provided
maxblkid even if it is a lower value than the existing one.

For testing purposes the send_encrypted_files.ksh test has been
extended to include a variety of truncated files and multiple
snapshots. It also now leverages the xattrtest command to help
ensure raw receives correctly handle xattrs.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8168 
Closes #8487
2019-03-13 10:52:01 -07:00
Olaf Faaland 3d31aad83e MMP writes rotate over leaves
Instead of choosing a leaf vdev quasi-randomly, by starting at the root
vdev and randomly choosing children, rotate over leaves to issue MMP
writes.  This fixes an issue in a pool whose top-level vdevs have
different numbers of leaves.

The issue is that the frequency at which individual leaves are chosen
for MMP writes is based not on the total number of leaves but based on
how many siblings the leaves have.

For example, in a pool like this:

       root-vdev
   +------+---------------+
vdev1                   vdev2
  |                       |
  |                +------+-----+-----+----+
disk1             disk2 disk3 disk4 disk5 disk6

vdev1 and vdev2 will each be chosen 50% of the time.  Every time vdev1
is chosen, disk1 will be chosen.  However, every time vdev2 is chosen,
disk2 is chosen 20% of the time.  As a result, disk1 will be sent 5x as
many MMP writes as disk2.

This may create wear issues in the case of SSDs.  It also reduces the
effectiveness of MMP as it depends on the writes being evenly
distributed for the case where some devices fail or are partitioned.

The new code maintains a list of leaf vdevs in the pool.  MMP records
the last leaf used for an MMP write in mmp->mmp_last_leaf.  To choose
the next leaf, MMP starts at mmp->mmp_last_leaf and traverses the list,
continuing from the head if the tail is reached.  It stops when a
suitable leaf is found or all leaves have been examined.

Added a test to verify MMP write distribution is even.

Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7953
2019-03-12 10:37:06 -07:00
Lorenz Brun bf90948daf Reorder ZFS ioctls to fix cross-version compatibility
Reorder ZFS ioctls to fix cross-version compatibility.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Lorenz Brun <lorenz@dolansoft.org>
Closes #8484
2019-03-09 13:39:31 -08:00
Matthew Ahrens c568ab8d99 zfs.8 has wrong description of "zfs program -t"
The "-t" argument to "zfs program" specifies a limit on the number of
LUA instructions that can be executed.  The zfs.8 manpage has the wrong
description.  It should be updated to match what's in zfs-program.8

Also fix the formatting of the zfs help message.

Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #8410
2019-02-26 11:15:28 -08:00
loli10K c44a3ec059 zvol: allow rename of in use ZVOL dataset
While ZFS allow renaming of in use ZVOLs at the DSL level without issues
the ZVOL layer does not correctly update the renamed dataset if the
device node is open (zv->zv_open_count > 0): trying to access the stale
dataset name, for instance during a zfs receive, will cause the
following failure:

VERIFY3(zv->zv_objset->os_dsl_dataset->ds_owner == zv) failed ((null) == ffff8800dbb6fc00)
PANIC at zvol.c:1255:zvol_resume()
Showing stack for process 1390
CPU: 0 PID: 1390 Comm: zfs Tainted: P           O  3.16.0-4-amd64 #1 Debian 3.16.51-3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 0000000000000000 ffffffff8151ea00 ffffffffa0758a80 ffff88028aefba30
 ffffffffa0417219 ffff880037179220 ffffffff00000030 ffff88028aefba40
 ffff88028aefb9e0 2833594649524556 6f5f767a3e2d767a 6f3e2d7465736a62
Call Trace:
 [<0>] ? dump_stack+0x5d/0x78
 [<0>] ? spl_panic+0xc9/0x110 [spl]
 [<0>] ? mutex_lock+0xe/0x2a
 [<0>] ? zfs_refcount_remove_many+0x1ad/0x250 [zfs]
 [<0>] ? rrw_exit+0xc8/0x2e0 [zfs]
 [<0>] ? mutex_lock+0xe/0x2a
 [<0>] ? dmu_objset_from_ds+0x9a/0x250 [zfs]
 [<0>] ? dmu_objset_hold_flags+0x71/0xc0 [zfs]
 [<0>] ? zvol_resume+0x178/0x280 [zfs]
 [<0>] ? zfs_ioc_recv_impl+0x88b/0xf80 [zfs]
 [<0>] ? zfs_refcount_remove_many+0x1ad/0x250 [zfs]
 [<0>] ? zfs_ioc_recv+0x1c2/0x2a0 [zfs]
 [<0>] ? dmu_buf_get_user+0x13/0x20 [zfs]
 [<0>] ? __alloc_pages_nodemask+0x166/0xb50
 [<0>] ? zfsdev_ioctl+0x896/0x9c0 [zfs]
 [<0>] ? handle_mm_fault+0x464/0x1140
 [<0>] ? do_vfs_ioctl+0x2cf/0x4b0
 [<0>] ? __do_page_fault+0x177/0x410
 [<0>] ? SyS_ioctl+0x81/0xa0
 [<0>] ? async_page_fault+0x28/0x30
 [<0>] ? system_call_fast_compare_end+0x10/0x15

Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6263 
Closes #8371
2019-02-22 15:38:42 -08:00
loli10K bb1be77a35 Prevent user accounting on readonly pool
Trying to mount a dataset from a readonly pool could inadvertently start
the user accounting upgrade task, leading to the following failure:

VERIFY3(tx->tx_threads == 2) failed (0 == 2)
PANIC at txg.c:680:txg_wait_synced()
Showing stack for process 2541
CPU: 2 PID: 2541 Comm: z_upgrade Tainted: P           O  3.16.0-4-amd64 #1 Debian 3.16.51-3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 [<0>] ? dump_stack+0x5d/0x78
 [<0>] ? spl_panic+0xc9/0x110 [spl]
 [<0>] ? dnode_next_offset+0x1d4/0x2c0 [zfs]
 [<0>] ? dmu_object_next+0x77/0x130 [zfs]
 [<0>] ? dnode_rele_and_unlock+0x4d/0x120 [zfs]
 [<0>] ? txg_wait_synced+0x91/0x220 [zfs]
 [<0>] ? dmu_objset_id_quota_upgrade_cb+0x10f/0x140 [zfs]
 [<0>] ? dmu_objset_upgrade_task_cb+0xe3/0x170 [zfs]
 [<0>] ? taskq_thread+0x2cc/0x5d0 [spl]
 [<0>] ? wake_up_state+0x10/0x10
 [<0>] ? taskq_thread_should_stop.part.3+0x70/0x70 [spl]
 [<0>] ? kthread+0xbd/0xe0
 [<0>] ? kthread_create_on_node+0x180/0x180
 [<0>] ? ret_from_fork+0x58/0x90
 [<0>] ? kthread_create_on_node+0x180/0x180

This patch updates both functions responsible for checking if we can
perform user accounting to verify the pool is not readonly.

Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8424
2019-02-19 18:41:18 -08:00
Ned Bass 75d6b7ddca Add missing copyright notice to large_dnode tests
Missing copyright notices were noticed during the Illumos
RTI process. Add LLNS 2016 copyright based on original merge
date.

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #8435
2019-02-19 18:39:10 -08:00
John Wren Kennedy 435637d1ed ZTS: user_property_002_pos fails to destroy volume
During the cleanup function of this test, an attempt to destroy a volume
can fail because the volume is busy. This leaves the system with
unexpected datasets which in turn causes subsequent failures.

Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #8422
2019-02-19 11:12:47 -08:00
John Wren Kennedy 07237a7bc1 ZTS: clone_001_pos fails in cleanup on busy dataset
The "cleanup_all" function in this test calls "zfs destroy" which
fails approximately 30% of the time in our environment due to the
dataset being busy. Since the failure happens during cleanup, the
error is propagated to subsequent tests.

Tested by running the snapshot test group in a loop without seeing
any failures.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #8409
2019-02-15 12:45:46 -08:00
Paul Zuchowski 9c5e88b1de zfs should optionally send holds
Add -h switch to zfs send command to send dataset holds. If
holds are present in the stream, zfs receive will create them
on the target dataset, unless the zfs receive -h option is used
to skip receive of holds.

Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #7513
2019-02-15 12:41:38 -08:00
Alek P dcec0a12c8 port async unlinked drain from illumos-nexenta
This patch is an async implementation of the existing sync
zfs_unlinked_drain() function. This function is called at mount time and
is responsible for freeing znodes that we didn't get to freeing before.
We don't have to hold mounting of the dataset until the unlinked list is
fully drained as is done now. Since we can process the unlinked set
asynchronously this results in a better user experience when mounting a
dataset with entries in the unlinked set.

Reviewed by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #8142
2019-02-12 10:41:15 -08:00
loli10K d8d418ff0c ZVOLs should not be allowed to have children
zfs create, receive and rename can bypass this hierarchy rule. Update
both userland and kernel module to prevent this issue and use pyzfs
unit tests to exercise the ioctls directly.

Note: this commit slightly changes zfs_ioc_create() ABI. This allow to
differentiate a generic error (EINVAL) from the specific case where we
tried to create a dataset below a ZVOL (ZFS_ERR_WRONG_PARENT).

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
2019-02-08 15:44:15 -08:00
loli10K 4417096956 Pool allocation classes misplacing small file blocks
Due to an off-by-one condition in spa_preferred_class() we are picking
the "normal" allocation class instead of the "special" one for file
blocks with size equal to the special_small_blocks property value.

This change fix the small code issue, update the ZFS Test Suite and the
zfs(8) man page.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8351
Closes #8361
2019-02-08 12:32:12 -08:00
Ahmed Ghanem 9634299657 OpenZFS 9185 - Enable testing over NFS in ZFS performance tests
This change makes additions to the ZFS test suite that allows the
performance tests to run over NFS. The test is run and performance data
collected from the server side, while IO is generated on the NFS client.

This has been tested with Linux and illumos NFS clients.

Authored by: Ahmed Ghanem <ahmedg@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Kevin Greene <kevin.greene@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/9185
Closes #8367
2019-02-04 09:27:37 -08:00
bunder2015 cca14128c9 flake8 pass
F632 use ==/!= to compare str, bytes, and int literals

Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #8368
2019-02-04 09:02:46 -08:00
Serapheim Dimitropoulos c853f382db Change target size of metaslabs from 256GB to 16GB
= Old behavior

For vdev sizes 100GB to 50TB we keep ~200 metaslabs per
vdev and the metaslab size grows from 512MB to 256GB.
For vdev's bigger than that we start increasing the
number of metaslabs until we hit the 128K limit.

= New Behavior

For vdev sizes 100GB to 3TB we keep ~200 metaslabs per
vdev and the metaslab size grows from 512MB to 16GB.
For vdev's bigger than that we start increasing the
number of metaslabs until we hit the 128K limit.

= Reasoning

The old behavior makes metaslabs grow in size when
the vdev range is between 3TB (ms_size 16GB) and
32PB (ms_size 256GB). Even though keeping the number
of metaslabs is good in terms of potential number of
I/Os per TXG, these bigger metaslabs take longer
to be loaded and after they are loaded they can
take up a lot of memory because of their range trees.

This change tries to put a boundary in memory and
loading time for the specific range of vdev sizes.

Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #8324
2019-01-25 16:38:27 -08:00
loli10K 60b0a963f5 Off-by-one in zap_leaf_array_create()
Trying to set user properties with their length 1 byte shorter than the
maximum size triggers an assertion failure in zap_leaf_array_create():

  panic[cpu0]/thread=ffffff000a092c40:
  assertion failed: num_integers * integer_size < (8<<10) (0x2000 < 0x2000), file: ../../common/fs/zfs/zap_leaf.c, line: 233

  ffffff000a092500 genunix:process_type+167c35 ()
  ffffff000a0925a0 zfs:zap_leaf_array_create+1d2 ()
  ffffff000a092650 zfs:zap_entry_create+1be ()
  ffffff000a092720 zfs:fzap_update+ed ()
  ffffff000a0927d0 zfs:zap_update+1a5 ()
  ffffff000a0928d0 zfs:dsl_prop_set_sync_impl+5c6 ()
  ffffff000a092970 zfs:dsl_props_set_sync_impl+fc ()
  ffffff000a0929b0 zfs:dsl_props_set_sync+79 ()
  ffffff000a0929f0 zfs:dsl_sync_task_sync+10a ()
  ffffff000a092a80 zfs:dsl_pool_sync+3a3 ()
  ffffff000a092b50 zfs:spa_sync+4e6 ()
  ffffff000a092c20 zfs:txg_sync_thread+297 ()
  ffffff000a092c30 unix:thread_start+8 ()

This patch simply corrects the assertion.

Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8278
2019-01-18 09:58:46 -08:00
Serapheim Dimitropoulos 419ba59145 Update vdev_is_spacemap_addressable() for new spacemap encoding
Since the new spacemap encoding was ported to ZoL that's no longer 
a limitation. This patch updates vdev_is_spacemap_addressable() 
that was performing that check.

It also updates the appropriate test to ensure that the same 
functionality is tested.  The test does so by creating pools that 
don't have the new spacemap encoding enabled - just the checkpoint
feature. This patch also reorganizes that same tests in order to 
cut in half its memory consumption.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #8286
2019-01-16 15:06:20 -08:00
Serapheim Dimitropoulos db587941c5 Make zdb results for checkpoint tests consistent
This patch exports and re-imports the pool when these tests are
analyzed with zdb to get consistent results.

Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #8292
2019-01-16 10:41:47 -08:00
Brian Behlendorf 6e91a72fe3
Disable 'zfs remap' command
The implementation of 'zfs remap' has proven to be problematic since
it modifies the objset (but not its logical contents) by dirtying
metadata without owning it.  The consequence of which is that
dmu_objset_remap_indirects() is vulnerable to certain races.

For example, if we are in the middle of receiving into the filesystem
while it is being remapped.  Then it is possible we could evict the
objset when the receive completes (see dsl_dataset_clone_swap_sync_impl,
or dmu_recv_end_sync), but dmu_objset_remap_indirects() may be still
using the objset.  The result of which would be a panic.

Extended runs of ztest(8) have exposed other possible races which
can occur when using 'zfs remap'.  Several of these have been fixed
but there may be others which have not yet been encountered and
diagnosed.

Furthermore, the ability to manually remap a filesystem is no longer
particularly useful now that the removal code can map large chunks.
Coupled with the fact that explaining what this command does and why
it may be useful requires a detailed understanding of the internals
of device removal.  These are details users should not be bothered
with.

Therefore, the 'zfs remap' command is being disabled but not entirely
removed.  It may be removed in the future or potentially reworked
to address the issues described above.  Since 'zfs remap' has never
been part of a tagged release its removal is expected to have
minimal impact.

The ZTS tests have been updated to continue to exercise the command
to prevent atrophy, but it has been removed entirely from ztest(8).

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8238
2019-01-15 15:46:58 -08:00
Paul Zuchowski 83c796c5e9 zfs filesystem skipped by df -h
On full pool when pool root filesystem references very few bytes,
the f_blocks returned to statvfs is 0 but should be at least 1.

Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #8253 
Closes #8254
2019-01-13 10:06:13 -08:00
Brian Behlendorf 99b0b5bc3f
ZTS: zpool_resilver_restart
Since the vdev initialize feature was integrated the ZTS
zpool_resilver_restart test has been hitting its internal
timeout more frequently.  This happens most often on
the coverage builder but not exclusively.  Increasing the
timeout for this test case prevents any false positives.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8273
2019-01-13 10:01:31 -08:00
loli10K 0f5f23869a zfs receive and rollback can skew filesystem_count
This commit fixes a small issue which causes both zfs receive and
rollback operations to incorrectly increase the "filesystem_count"
property value.

This change also adds a new test group "limits" to the ZFS Test Suite
to exercise both filesystem_count/limit and snapshot_count/limit
functionality.

Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8232
2019-01-08 10:17:46 -08:00
Brian Behlendorf a769fb53a1 Add 'zpool status -i' option
Only display the full details of the vdev initialization state
in 'zpool status' output when requested with the -i option.
By default display '(initializing)' after vdevs when they are
being actively initialized.  This is consistent with the
established precident of appending '(resilvering), etc' and
fits within the default 80 column terminal width making it
easy to read.

Additionally, updated the 'zpool initialize' documentation to
make it clear the options are mutually exclusive, but allow
duplicate options like all other zfs/zpool commands.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8230
2019-01-07 11:03:18 -08:00
George Wilson 619f097693 OpenZFS 9102 - zfs should be able to initialize storage devices
PROBLEM
========

The first access to a block incurs a performance penalty on some platforms
(e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are
"thick provisioned", where supported by the platform (VMware). This can
create a large delay in getting a new virtual machines up and running (or
adding storage to an existing Engine). If the thick provision step is
omitted, write performance will be suboptimal until all blocks on the LUN
have been written.

SOLUTION
=========

This feature introduces a way to 'initialize' the disks at install or in the
background to make sure we don't incur this first read penalty.

When an entire LUN is added to ZFS, we make all space available immediately,
and allow ZFS to find unallocated space and zero it out. This works with
concurrent writes to arbitrary offsets, ensuring that we don't zero out
something that has been (or is in the middle of being) written. This scheme
can also be applied to existing pools (affecting only free regions on the
vdev). Detailed design:
        - new subcommand:zpool initialize [-cs] <pool> [<vdev> ...]
                - start, suspend, or cancel initialization
        - Creates new open-context thread for each vdev
        - Thread iterates through all metaslabs in this vdev
        - Each metaslab:
                - select a metaslab
                - load the metaslab
                - mark the metaslab as being zeroed
                - walk all free ranges within that metaslab and translate
                  them to ranges on the leaf vdev
                - issue a "zeroing" I/O on the leaf vdev that corresponds to
                  a free range on the metaslab we're working on
                - continue until all free ranges for this metaslab have been
                  "zeroed"
                - reset/unmark the metaslab being zeroed
                - if more metaslabs exist, then repeat above tasks.
                - if no more metaslabs, then we're done.

        - progress for the initialization is stored on-disk in the vdev’s
          leaf zap object. The following information is stored:
                - the last offset that has been initialized
                - the state of the initialization process (i.e. active,
                  suspended, or canceled)
                - the start time for the initialization

        - progress is reported via the zpool status command and shows
          information for each of the vdevs that are initializing

Porting notes:
- Added zfs_initialize_value module parameter to set the pattern
  written by "zpool initialize".
- Added zfs_vdev_{initializing,removal}_{min,max}_active module options.

Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://www.illumos.org/issues/9102
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb
Closes #8230
2019-01-07 10:37:26 -08:00
John Wren Kennedy dffce3c282 test-runner: python3 support
Updated to be compatible with Python 2.6, 2.7, 3.5 or newer.

Reviewed-by: John Ramsden <johnramsden@riseup.net>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Wren Kennedy <john.kennedy@delphix.com>
Closes #8096
2019-01-06 10:39:41 -08:00
Brian Behlendorf 530248d1aa arc_summary: consolidate test case
Since we're only installing one version of arc_summary we only
need one test case.  Update the test to determine which version
is available and then test its supported flags.

Remove files for misc tests which should have been cleaned up.

Reviewed-by: John Ramsden <johnramsden@riseup.net>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8096
2019-01-06 10:39:41 -08:00
Brian Behlendorf 6e72a5b9b6 pyzfs: python3 support (build system)
Almost all of the Python code in the respository has been updated
to be compatibile with Python 2.6, Python 3.4, or newer.  The only
exceptions are arc_summery3.py which requires Python 3, and pyzfs
which requires at least Python 2.7.  This allows us to maintain a
single version of the code and support most default versions of
python.  This change does the following:

* Sets the default shebang for all Python scripts to python3.  If
  only Python 2 is available, then at install time scripts which
  are compatible with Python 2 will have their shebangs replaced
  with /usr/bin/python.  This is done for compatibility until
  Python 2 goes end of life.  Since only the installed versions
  are changed this means Python 3 must be installed on the system
  for test-runner when testing in-tree.

* Added --with-python=<2|3|3.4,etc> configure option which sets
  the PYTHON environment variable to target a specific python
  version.  By default the newest installed version of Python
  will be used or the preferred distribution version when
  creating pacakges.

* Fixed --enable-pyzfs configure checks so they are run when
  --enable-pyzfs=check and --enable-pyzfs=yes.

* Enabled pyzfs for Python 3.4 and newer, which is now supported.

* Renamed pyzfs package to python<VERSION>-pyzfs and updated to
  install in the appropriate site location.  For example, when
  building with --with-python=3.4 a python34-pyzfs will be
  created which installs in /usr/lib/python3.4/site-packages/.

* Renamed the following python scripts according to the Fedora
  guidance for packaging utilities in /bin

  - dbufstat.py     -> dbufstat
  - arcstat.py      -> arcstat
  - arc_summary.py  -> arc_summary
  - arc_summary3.py -> arc_summary3

* Updated python-cffi package name.  On CentOS 6, CentOS 7, and
  Amazon Linux it's called python-cffi, not python2-cffi.  For
  Python3 it's called python3-cffi or python3x-cffi.

* Install one version of arc_summary.  Depending on the version
  of Python available install either arc_summary2 or arc_summary3
  as arc_summary.  The user output is only slightly different.

Reviewed-by: John Ramsden <johnramsden@riseup.net>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8096
2019-01-06 10:39:41 -08:00
bunder2015 5365b0747a Add missing MMP status code to libzfs_status
When MMP was merged the status codes in libzfs_status were not
updated to add the status code for ZPOOL_STATUS_IO_FAILURE_MMP.  This
commit corrects this and adds comments to help keep track of which
code is used for which status.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #8148
Closes #8222
2019-01-03 12:15:46 -08:00
Tom Caputi 7c46894081 ZTS: fix wait_scrubbed()
Currently, wait_scrubbed() is the only function of its kind that
accepts a timeout, which is 10s by default. This timeout is pretty
short for a scrub and causes test failures if we run too long. This
patch removes the timeout, instead leaning on the global test suite
timeout to ensure the tests keep moving.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8210
2018-12-14 10:06:49 -08:00
Andriy Gapon dc1c630b8a OpenZFS 9630 - add lzc_rename and lzc_destroy to libzfs_core
Porting Notes:
* Additional changes to recv_rename_impl() were required due to
  encryption code not being merged in OpenZFS yet.
* libzfs_core python bindings (pyzfs) were updated to fully support
  both lzc_rename() and lzc_destroy()

Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: loli10K <ezomori.nozomu@gmail.com>

OpenZFS-issue: https://www.illumos.org/issues/9630
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/049ba63
Closes #8207
2018-12-14 09:49:45 -08:00
Brian Behlendorf 4b70290163
Check for strlcat and strlcpy
This partially reverts commit 8005ca4 by moving the strlcat()
and strlcpy() compatibility implementations back to their original
location.

In addition, these two functions were added to the AC_CHECK_FUNCS
macro. When these functions are available from the C library,
HAVE_STRLCAT and HAVE_STRLCPY will be defined and library version
used. Otherwise the compatibility version is built.

Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8157 
Closes #8202
2018-12-11 16:01:41 -08:00
LOLi bdbd5477bc Fix ASSERT in zfs_receive_one()
This commit fixes the following ASSERT in zfs_receive_one() when
receiving a send stream from a root dataset with the "-e" option:

    $ sudo zfs snap source@snap
    $ sudo zfs send source@snap | sudo zfs recv -e destination/recv
    chopprefix > drrb->drr_toname
    ASSERT at libzfs_sendrecv.c:3804:zfs_receive_one()

Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8121
2018-12-04 09:38:55 -08:00
Brian Behlendorf 7c9a42921e
Detect IO errors during device removal
* Detect IO errors during device removal

While device removal cannot verify the checksums of individual
blocks during device removal, it can reasonably detect hard IO
errors from the leaf vdevs.  Failure to perform this error
checking can result in device removal completing successfully,
but moving no data which will permanently corrupt the pool.

Situation 1: faulted/degraded vdevs

In the configuration shown below, the removal of mirror-0 will
permanently corrupt the pool.  Device removal will preferentially
copy data from 'vdev1 -> vdev3' and from 'vdev2 -> vdev4'.  Which
in this case will result in nothing being copied since one vdev
in each of those groups in unavailable.  However, device removal
will complete successfully since all IO errors are ignored.

  tank                DEGRADED     0     0     0
    mirror-0          DEGRADED     0     0     0
      /var/tmp/vdev1  FAULTED      0     0     0  external fault
      /var/tmp/vdev2  ONLINE       0     0     0
    mirror-1          DEGRADED     0     0     0
      /var/tmp/vdev3  ONLINE       0     0     0
      /var/tmp/vdev4  FAULTED      0     0     0  external fault

This issue is resolved by updating the source child selection
logic to exclude unreadable leaf vdevs.  Additionally, unwritable
destination child vdevs which can never succeed are skipped to
prevent generating a large number of write IO errors.

Situation 2: individual hard IO errors

During removal if an unexpected hard IO error is encountered when
either reading or writing the child vdev the entire removal
operation is cancelled.  While it may be possible to reconstruct
the data after removal that cannot be guaranteed.  The only
strictly safe thing to do is to cancel the removal.

As a future improvement we may want to instead suspend the removal
process and allow the damaged region to be retried.  But that work
is left for another time, hard IO errors during the removal process
are expected to be exceptionally rare.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #6900
Closes #8161
2018-12-04 09:37:37 -08:00
Tom Caputi cef48f14da Remove races from scrub / resilver tests
Currently, several tests in the ZFS Test Suite that attempt to
test scrub and resilver behavior occasionally fail. A big reason
for this is that these tests use a combination of zinject and
zfs_scan_vdev_limit to attempt to slow these operations enough
to verify their test commands. This method works most of the time,
but provides no guarantees and leads to flaky behavior. This patch
adds a new tunable, zfs_scan_suspend_progress, that ensures that
scans make no progress, guaranteeing that tests can be run without
racing.

This patch also changes zfs_remove_max_bytes_pause to match this
new tunable. This provides some consistency between these two
similar tunables and ensures that the tunable will not misbehave
on 32-bit systems.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8111
2018-11-28 10:12:08 -08:00
LOLi 00369f3338 ZTS: fix "not found" errors
This commit fixes several "not found" errors caused by calling undefined
or incorrect shell functions in the following ZFS Test Suite groups:

   * alloc_class
   * channel_program/lua_core
   * channel_program/synctask_core
   * cli_root/zpool_import
   * cli_user/misc

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8152
2018-11-27 09:39:37 -08:00
Brian Behlendorf 8005ca4f74
Move strlcat, strlcpy, and strnlen
Move strlcat() and strlcpy() from .c source files in to the libspl
string.h header.  By changing these compatibility functions to static
inline functions they can included as needed without requiring linking
with the libspl.so library.

Remove strnlen() which is barely used in the source, and has been
provided by glibc since v2.10.

Finally, convert four instances of strncpy() to strlcpy() in
libzfs_input_check.c which were causing build warnings when compiling
with gcc 8.2.1.  For example:

  libzfs_input_check.c: In function ‘zfs_destroy’:
  libzfs_input_check.c:651:9: error: ‘strncpy’ specified bound \
      4096 equals destination size [-Werror=stringop-truncation]
    (void) strncpy(zc.zc_name, dataset, sizeof (zc.zc_name));
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8116
2018-11-20 10:37:49 -08:00
LOLi 0cd5c941d0 zpool: allow split with whole-disk devices
This change allows 'zpool split' to work with whole-disk devices and
updates the ZFS Test Suite with a new script to exercise this
functionality.

Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6643 
Closes #8133
2018-11-20 10:22:53 -08:00
John Wren Kennedy 70621ff20e ZTS: Fix parsing of zpool status in checksum test
filetest_001_pos consumes the output using read -r, assigning each
field to a variable. The problem comes when a vdev is marked degraded,
which appends extra fields to the line. This causes the trailing text
to be treated as part of the `cksum` variable. Using awk instead of
read -r allows us to extract the checksum error count from the output
whether the vdev is degraded or not.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Wren Kennedy <john.kennedy@delphix.com>
Closes #8136
2018-11-20 09:51:42 -08:00
LOLi ebb8735901 ZTS: "checksum" test group needs "lscpu"
This change adds "lscpu" to the list of commands used by the ZFS Test
Suite: this is required by the "checksum" test group to read the CPU
frequency which is used in EdonR, Skein and SHA2 performance tests.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8139
2018-11-20 09:47:58 -08:00
Sebastien Roy a10d50f999 OpenZFS 8115 - parallel zfs mount
Porting Notes:
* Use thread pools (tpool) API instead of introducing taskq interfaces
  to libzfs.
* Use pthread_mutext for locks as mutex_t isn't available.
* Ignore alternative libshare initialization since OpenZFS-7955 is
  not present on zfsonlinux.

Authored by: Sebastien Roy <seb@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Authored by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Don Brady <don.brady@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/8115
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3f0e2b569
Closes #8092
2018-11-15 11:33:58 -08:00
loli10K d48091de81 zed: detect and offline physically removed devices
This commit adds a new test case to the ZFS Test Suite to verify ZED
can detect when a device is physically removed from a running system:
the device will be offlined if a spare is not available in the pool.

We implement this by using the existing libudev functionality and
without relying solely on the FM kernel module capabilities which have
been observed to be unreliable with some kernels.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #1537
Closes #7926
2018-11-09 11:17:24 -08:00
Tony Hutter ad796b8a3b Add zpool status -s (slow I/Os) and -p (parseable)
This patch adds a new slow I/Os (-s) column to zpool status to show the
number of VDEV slow I/Os. This is the number of I/Os that didn't
complete in zio_slow_io_ms milliseconds. It also adds a new parsable
(-p) flag to display exact values.

 	NAME         STATE     READ WRITE CKSUM  SLOW
 	testpool     ONLINE       0     0     0     -
	  mirror-0   ONLINE       0     0     0     -
 	    loop0    ONLINE       0     0     0    20
 	    loop1    ONLINE       0     0     0     0

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7756
Closes #6885
2018-11-08 16:47:24 -08:00
George Melikov 877d925a9e Update zfs_admin_snapshot value (disabled)
It's disabled by default, update code and tests to reflect
the documentation.

Minor cleanup in delegate_common.kshlib.

Reviewed-by: Gregor Kopka <gregor@kopka.net>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #7835 
Closes #8045
2018-11-08 16:17:12 -08:00
Tom Caputi d8244d34bd ZTS: Fix and reenable zfs_rename tests
zfs_rename_006_pos has been flaky in the past because it was
missing a call to block_device_wait to ensure the zvols it creates
are present before running dd. Whenever this this happened,
zfs_rename_009_neg would also fail because the first test would
leak a zvol clone that it did not know how to clean up. This patch
fixes the root cause and reenables the test. It also fixes some
minor grammar errors.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #5647 
Closes #5648 
Closes #8088
2018-11-07 16:59:27 -08:00
Paul Zuchowski c2bcfa71f4 ZTS: Fix test zfs_mount_006_pos
For Linux, place a file in the mount point folder so it will be
considered "busy".  Fix the while loop so it doesn't rm in
directories above the testdir.  Add Linux-specific code to test
overlay on|off.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #4990 
Closes #8081
2018-11-07 16:54:08 -08:00
Paul Zuchowski 04a88fc00c ZTS: Fix posix ACL tests that should pass
Make sure tests have proper include files.  Make sure underlying
"chmod" style permissions don't interfere with ACLs.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #8069
2018-10-31 18:58:43 -05:00
George Melikov 58aeb87a8f ZTS: change `$(cat)` to `$(<)` for speedup
It's better to use ksh/bash built in methods,
rather than spawn new processes every time.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #8071
2018-10-31 12:00:06 -05:00
Serapheim Dimitropoulos 0a544c174d zdb -k does not work on Linux when used with -e
This minor bug was introduced with the port of the feature from
OpenZFS to ZoL. This patch fixes the issue that was caused by
a minor re-ordering from the original code.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #8001
2018-10-30 11:46:18 -05:00
Brian Behlendorf bea7578356
ZTS: Fix auto_replace_001_pos test
The root cause of these failures is that udev can notify the
ZED of newly created partition before its links are created.
Handle this by allowing an auto-replace to briefly wait until
udev confirms the links exist.

Distill this test case down to its essentials so it can be run
reliably.  What we need to check is that:

  1) A new disk, in the same physical location, is automatically
     brought online when added to the system,
  2) It completes the replacement process, and
  3) The pool is now ONLINE and healthy.

There is no need to remove the scsi_debug module.  After exporting
the pool the disk can be zeroed, removed, and then re-added to the
system as a new disk.

Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8051
2018-10-29 15:05:14 -05:00
Brian Behlendorf b74f48fe1b
Fix flake8 "invalid escape sequence 'x'" warning
From, https://lintlyci.github.io/Flake8Rules/rules/W605.html

As of Python 3.6, a backslash-character pair that is not a valid
escape sequence now generates a DeprecationWarning. Although this
will eventually become a SyntaxError, that will not be for several
Python releases.

Note 'float_pobj' was simply removed from arcstat.py since it
was entirely unused.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8056
2018-10-24 23:26:08 -07:00
Brian Behlendorf 3449243b6d
ZTS: Update project quota tests
e2fsprogs v1.44.1, which provides lsattr, added a new attribute
for ext3 called "verity".  It is reported after the project quota
flag as a 'V' character in the `lsattr` output.

Update projectid_001_pos.ksh and projecttree_001_pos.ksh to use
a pattern which will match the expected output in both cases.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8043
2018-10-23 19:53:14 -07:00
Tom Caputi 80a91e7469 Defer new resilvers until the current one ends
Currently, if a resilver is triggered for any reason while an
existing one is running, zfs will immediately restart the existing
resilver from the beginning to include the new drive. This causes
problems for system administrators when a drive fails while another
is already resilvering. In this case, the optimal thing to do to
reduce risk of data loss is to wait for the current resilver to end
before immediately replacing the second failed drive, which allows
the system to operate with two incomplete drives for the minimum
amount of time.

This patch introduces the resilver_defer feature that essentially
does this for the admin without forcing them to wait and monitor
the resilver manually. The change requires an on-disk feature
since we must mark drives that are part of a deferred resilver in
the vdev config to ensure that we do not assume they are done
resilvering when an existing resilver completes.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: @mmaybee 
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7732
2018-10-18 21:06:18 -07:00
LOLi 2e55034471 zpool: allow sharing of spare device among pools
ZFS allows, by default, sharing of spare devices among different pools;
this commit simply restores this functionality for disk devices and
adds an additional tests case to the ZFS Test Suite to prevent future
regression.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7999
2018-10-17 11:21:07 -07:00
ilbsmart 779a6c0bf6 deadlock between mm_sem and tx assign in zfs_write() and page fault
The bug time sequence:
1. thread #1, `zfs_write` assign a txg "n".
2. In a same process, thread #2, mmap page fault (which means the
   `mm_sem` is hold) occurred, `zfs_dirty_inode` open a txg failed,
   and wait previous txg "n" completed.
3. thread #1 call `uiomove` to write, however page fault is occurred
   in `uiomove`, which means it need `mm_sem`, but `mm_sem` is hold by
   thread #2, so it stuck and can't complete,  then txg "n" will
   not complete.

So thread #1 and thread #2 are deadlocked.

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Grady Wong <grady.w@xtaotech.com>
Closes #7939
2018-10-16 11:11:24 -07:00
Alek P 50a343d85c Fix changelist mounted-dataset iteration
Commit 0c6d093 caused a regression in the inherit codepath.
The fix is to restrict the changelist iteration on mountpoints and
add proper handling for 'legacy' mountpoints

Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #7988 
Closes #7991
2018-10-10 21:13:13 -07:00
Tony Hutter 2ef0f8c329 Print "(repairing)" in zpool status again
Historically, zpool status prints "(repairing)" for any drives that
have errors during a scrub:

        NAME            STATE     READ WRITE CKSUM
        mypool          ONLINE       0     0     0
          mirror-0      ONLINE       0     0     0
            /tmp/file1  ONLINE      13     0     0  (repairing)
            /tmp/file2  ONLINE       0     0     0
            /tmp/file3  ONLINE       0     0     0

This was accidentally broken in "OpenZFS 9166 - zfs storage pool
checkpoint" (d2734cc).  This patch adds it back in.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7779
Closes #7978
2018-10-09 20:30:32 -07:00
Prakash Surya 54eb2c410e Verify 'zfs destroy' will unshare the dataset
This change adds a new test case to the zfs-test suite to verify that
when 'zfs destroy' is used on a shared dataset, the dataset will be
unshared after the destroy operation completes.

Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #7941
2018-10-03 10:17:58 -07:00
Prakash Surya 1bf490ba93 Fix "zfs destroy" when "sharenfs=on" is used
When using "zfs destroy" on a dataset that is using "sharenfs=on" and
has been automatically exported (by libzfs), the dataset will not be
automatically unexported as it should be. This workflow appears to have
been broken by this commit: 3fd3e56cfd

In that change, the "zfs_unmount" function was modified to use the
"mnt.mnt_special" field when determining the mount point that is being
unmounted, rather than "mnt.mnt_mountp".

As a result, when "mntpt" is passed into "zfs_unshare_proto", it's value
is now the dataset name rather than the mountpoint. Thus, when this
value is used with the "is_shared" function (via "zfs_unshare_proto") it
will not find a match (since that function assumes it'll be passed the
mountpoint) and incorrectly reports that the dataset is not shared.

This can be easily reproduced with the following commands:

    $ sudo zpool create tank xvdb
    $ sudo zfs create -o sharenfs=on tank/fish
    $ sudo zfs destroy tank/fish

    $ sudo zfs list -r tank
    NAME   USED  AVAIL  REFER  MOUNTPOINT
    tank  97.5K  7.27G    24K  /tank

    $ sudo exportfs
    /tank/fish      <world>
    $ sudo cat /etc/dfs/sharetab
    /tank/fish      -       nfs     rw,crossmnt

At this point, the "tank/fish" filesystem doesn't exist, but it's still
listed as exported when looking at "exportfs" and "/etc/dfs/sharetab".

Also note, this change brings us back in-sync with the illumos code, as
it pertains to this one line; on illumos, "mnt.mnt_mountp" is used.

Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Issue #6143
Closes #7941
2018-10-03 10:17:58 -07:00
Alek P 0c6d09361d changelist should be able to iter on mounts
Modified changelist_gather()ing for the mountpoint property.
Now instead of iterating on all dataset descendants, we read
/proc/self/mounts and iterate on the mounted descendant datasets only.

Switched changelist implementation from a uu_list_* to uu_avl_* in
order to  reduce changlist code-path's worst case time complexity.

Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #7967
2018-10-02 12:30:58 -07:00
Brian Behlendorf 838bd5ff35
ZTS: Fix snapshot_009_pos, snapshot_010_pos
Mitigate the likelihood of the newly created volumes being busy
when the 'zfs destroy -r' is issued by waiting for udev to settle.
Since this is not a iron clad fix I've added the test case to
the known list of possible failures and referenced issue #7961.

Finally, in the case this test does fail fix the cleanup logic
so subsequent tests won't incorrectly fail.

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7961 
Closes #7962
2018-10-01 17:15:57 -07:00
John Gallagher d12614521a Fixes for procfs files backed by linked lists
There are some issues with the way the seq_file interface is implemented
for kstats backed by linked lists (zfs_dbgmsgs and certain per-pool
debugging info):

* We don't account for the fact that seq_file sometimes visits a node
  multiple times, which results in missing messages when read through
  procfs.
* We don't keep separate state for each reader of a file, so concurrent
  readers will receive incorrect results.
* We don't account for the fact that entries may have been removed from
  the list between read syscalls, so reading from these files in procfs
  can cause the system to crash.

This change fixes these issues and adds procfs_list, a wrapper around a
linked list which abstracts away the details of implementing the
seq_file interface for a list and exposing the contents of the list
through procfs.

Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
External-issue: LX-1211
Closes #7819
2018-09-26 11:08:12 -07:00
Gregor Kopka 3ed2fbcc1c Fix flake 8 style warnings
Ran zts-report.py and test-runner.py from ./tests/test-runner/bin/
through the 2to3 (https://docs.python.org/2/library/2to3.html).
Checked the result, fixed:
- 'maxint' -> 'maxsize' that 2to3 missed.
- 'cmp=' parameter for a 'sorted()' with a 'key=' version.
- try/except wrapping of configparser import as there are still
  python 2.7 systems that lack a compatibility shim

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregor Kopka <gregor@kopka.net>
Closes #7925 
Closes #7952
2018-09-26 11:02:26 -07:00
Brian Behlendorf a7165d7255 Revert "Fix flake 8 style warnings"
This reverts commit b8fd4310c5 which
accidentally introduced a regression for some versions of python.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7929
2018-09-24 17:20:42 -07:00
LOLi 36e369ecb8 ZTS: Fix removal_resume_export
This change simplify the test case removing part of the logic which was
introducing a race condition and thus causing spurious failures: we use
attempt_during_removal() from removal.kshlib instead which has been
observed to be more stable.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7894 
Closes #7913
2018-09-24 12:58:16 -07:00
Gregor Kopka b8fd4310c5 Fix flake 8 style warnings
Ran zts-report.py and test-runner.py from ./tests/test-runner/bin/
through the 2to3 (https://docs.python.org/2/library/2to3.html).
Checked the result, fixed:
- 'maxint' -> 'maxsize' that 2to3 missed.
- 'cmp=' parameter for a 'sorted()' with a 'key=' version.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Signed-off-by: Gregor Kopka <gregor@kopka.net>
Closes #7925 
Closes #7929
2018-09-24 10:12:59 -07:00
LOLi 5140a58f3b zpool should detect invalid fs property on create
This change improve the handling of invalid filesystem properties when
specified at pool creation: this is useful when 'zpool create -n'
(dry run) is executed to detect invalid fs-level options (-O) before
the actual command is run.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7620 
Closes #7878
2018-09-13 13:37:42 -07:00
Brian Behlendorf 92b432139d
Add removal_resume_export to zts-report.py
Add the removal_resume_export test case to the possible failure
section of the zts-report.py and reference the Github issue.  In
the CI environment this test has proven to be unreliable due to
the way it detects the removal thread.  This is a flaw in the test
and not device removal so update the result summary accordingly.

Additionally, increase the allowed timeout in an effort to reduce
the observed rate of false positves.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7895
Issue #7894
2018-09-13 13:35:09 -07:00
Roman Strashkin 733b5722b4 zpool split can create a corrupted pool
Added vdev_resilver_needed() check to verify VDEVs are fully
synced, so that after split the new pool will not be corrupted.

Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Roman Strashkin <roman.strashkin@nexenta.com>
Closes #7865
Closes #7881
2018-09-12 18:14:42 -07:00
LOLi 0238a9755b Fix 'zfs allow' for create time permissions
When no permission set is defined for a dataset the create time
permissions are incorrectly shown as if they were a permission set.
This change simply correct how allow permissions are displayed.

This commit also fixes a small manpage formatting issue and adds the
"zfs_allow_003_pos" test case to the ZFS Test Suite.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7519 
Closes #7860
2018-09-06 13:11:21 -07:00
Don Brady cc99f275a2 Pool allocation classes
Allocation Classes add the ability to have allocation classes in a
pool that are dedicated to serving specific block categories, such
as DDT data, metadata, and small file blocks. A pool can opt-in to
this feature by adding a 'special' or 'dedup' top-level VDEV.

Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Reviewed-by: Andreas Dilger <andreas.dilger@chamcloud.com>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Gregor Kopka <gregor@kopka.net>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #5182
2018-09-05 18:33:36 -07:00
Don Brady b83a0e2dc1 Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).

Programmatically document, via a zfs_ioc_key_t, the valid arguments 
for the ioc commands that rely on nvpair input arguments (i.e. non 
legacy commands from libzfs_core). Automatically verify the expected 
pairs before dispatching a command.

This initial phase focuses on the non-legacy ioctls. A follow-on 
change can address the legacy ioctl input from the zfs_cmd_t.

The zfs_ioc_key_t for zfs_keys_channel_program looks like:

static const zfs_ioc_key_t zfs_keys_channel_program[] = {
       {"program",     DATA_TYPE_STRING,               0},
       {"arg",         DATA_TYPE_UNKNOWN,              0},
       {"sync",        DATA_TYPE_BOOLEAN_VALUE,        ZK_OPTIONAL},
       {"instrlimit",  DATA_TYPE_UINT64,               ZK_OPTIONAL},
       {"memlimit",    DATA_TYPE_UINT64,               ZK_OPTIONAL},
};

Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE, 
EBADF, and E2BIG).

ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 12:14:01 -07:00
Don Brady e8bcb693d6 Add zfs module feature and property info to sysfs
This extends our sysfs '/sys/module/zfs' entry to include feature 
and property attributes. The primary consumer of this information 
is user processes, like the zfs CLI, that need to know what the 
current loaded ZFS module supports. The libzfs binary will consult 
this information when instantiating the zfs and zpool property 
tables and the pool features table.

This introduces 4 kernel objects (dirs) into '/sys/module/zfs'
with corresponding attributes (files):
  features.runtime
  features.pool
  properties.dataset
  properties.pool

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7706
2018-09-02 12:09:53 -07:00
Brian Behlendorf bb91178e60
ZTS: Fix EBUSY volume destroy failures
It's possible for an unrelated process, like blkid, to have the
volume open when 'zfs destroy' is run.  Switch the cleanup functions
to the destroy_dataset() helper which handles this case by retrying
the destroy when the dataset is busy.  This was done not only for
volumes but also for file systems for consistency.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7854
2018-08-31 15:30:44 -07:00
bunder2015 9e7fb6c171 ZTS: pool_checkpoint path cleanup
Removing hardcoded paths in pool_checkpoint.kshlib

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7840
2018-08-30 14:45:16 -07:00
Richard Elling 6fa1e1e73a ZTS: Fix DEV_DSKDIR trim from disk
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes #7848
2018-08-30 14:43:37 -07:00
bunder2015 de61daa597 ZTS: zvol_swap_003 path cleanup
Removing hardcoded paths in zvol_swap_003

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7839
2018-08-30 13:53:06 -07:00
bernie1995 0fe7c953b3 ZTS: path cleanup
Removing hardcoded paths in many scripts.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bernie1995 <bernie.pikes@gmail.com>
Issue #7507 
Closes #7843
2018-08-30 13:46:55 -07:00
Brian Behlendorf 6c6949acae
ZTS: Fix zfs_create_013_pos
It's possible for an unrelated process, like blkid, to have the
volume open when 'zfs destroy' is run.  Switch the cleanup function
to the destroy_dataset() helper which handles this case by retrying
the destroy when the dataset is busy.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7847
2018-08-30 13:38:09 -07:00
Tom Caputi c3bd3fb4ac OpenZFS 9403 - assertion failed in arc_buf_destroy()
Assertion failed in arc_buf_destroy() when concurrently reading
block with checksum error.

Porting notes:
* The ability to zinject decompression errors has been added, but
  this only works at the zio_decompress() level, where we have all
  of the info we need to match against the user's zinject options.
* The decompress_fault test has been added to test the new zinject
  functionality
* We attempted to set zio_decompress_fail_fraction to (1 << 18) in
  ztest for further test coverage. Although this did uncover a few
  low priority issues, this unfortuantely also causes ztest to
  ASSERT in many locations where the code is working correctly since
  it is designed to fail on IO errors. Developers can manually set
  this variable with the '-o' option to find and debug issues.

Authored by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Tom Caputi <tcaputi@datto.com>

OpenZFS-issue: https://illumos.org/issues/9403
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/fa98e487a9
Closes #7822
2018-08-29 11:33:33 -07:00
Tom Caputi 47ab01a18f Always wait for txg sync when umounting dataset
Currently, when unmounting a filesystem, ZFS will only wait for
a txg sync if the dataset is dirty and not readonly. However, this
can be problematic in cases where a dataset is remounted readonly
immediately before being unmounted, which often happens when the
system is being shut down. Since encrypted datasets require that
all I/O is completed before the dataset is disowned, this issue
causes problems when write I/Os leak into the txgs after the
dataset is disowned, which can happen when sync=disabled.

While looking into fixes for this issue, it was discovered that
dsl_dataset_is_dirty() does not return B_TRUE when the dataset has
been removed from the txg dirty datasets list, but has not actually
been processed yet. Furthermore, the implementation is comletely
different from dmu_objset_is_dirty(), adding to the confusion.
Rather than relying on this function, this patch forces the umount
code path (and the remount readonly code path) to always perform a
txg sync on read-write datasets and removes the function altogether.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7753
Closes #7795
2018-08-27 10:16:28 -07:00
Brian Behlendorf a584ef2605
Direct IO support
Direct IO via the O_DIRECT flag was originally introduced in XFS by
IRIX for database workloads. Its purpose was to allow the database
to bypass the page and buffer caches to prevent unnecessary IO
operations (e.g.  readahead) while preventing contention for system
memory between the database and kernel caches.

On Illumos, there is a library function called directio(3C) that
allows user space to provide a hint to the file system that Direct IO
is useful, but the file system is free to ignore it. The semantics
are also entirely a file system decision. Those that do not
implement it return ENOTTY.

Since the semantics were never defined in any standard, O_DIRECT is
implemented such that it conforms to the behavior described in the
Linux open(2) man page as follows.

    1.  Minimize cache effects of the I/O.

    By design the ARC is already scan-resistant which helps mitigate
    the need for special O_DIRECT handling.  Data which is only
    accessed once will be the first to be evicted from the cache.
    This behavior is in consistent with Illumos and FreeBSD.

    Future performance work may wish to investigate the benefits of
    immediately evicting data from the cache which has been read or
    written with the O_DIRECT flag.  Functionally this behavior is
    very similar to applying the 'primarycache=metadata' property
    per open file.

    2. O_DIRECT _MAY_ impose restrictions on IO alignment and length.

    No additional alignment or length restrictions are imposed.

    3. O_DIRECT _MAY_ perform unbuffered IO operations directly
       between user memory and block device.

    No unbuffered IO operations are currently supported.  In order
    to support features such as transparent compression, encryption,
    and checksumming a copy must be made to transform the data.

    4. O_DIRECT _MAY_ imply O_DSYNC (XFS).

    O_DIRECT does not imply O_DSYNC for ZFS.  Callers must provide
    O_DSYNC to request synchronous semantics.

    5. O_DIRECT _MAY_ disable file locking that serializes IO
       operations.  Applications should avoid mixing O_DIRECT
       and normal IO or mmap(2) IO to the same file.  This is
       particularly true for overlapping regions.

    All I/O in ZFS is locked for correctness and this locking is not
    disabled by O_DIRECT.  However, concurrently mixing O_DIRECT,
    mmap(2), and normal I/O on the same file is not recommended.

This change is implemented by layering the aops->direct_IO operations
on the existing AIO operations.  Code already existed in ZFS on Linux
for bypassing the page cache when O_DIRECT is specified.

References:
  * http://xfs.org/docs/xfsdocs-xml-dev/XFS_User_Guide/tmp/en-US/html/ch02s09.html
  * https://blogs.oracle.com/roch/entry/zfs_and_directio
  * https://ext4.wiki.kernel.org/index.php/Clarifying_Direct_IO's_Semantics
  * https://illumos.org/man/3c/directio

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #224 
Closes #7823
2018-08-27 10:04:21 -07:00
Joao Carlos Mendes Luis 5d6ad2442b Fedora 28: Fix misc bounds check compiler warnings
Fix a bunch of truncation compiler warnings that show up
on Fedora 28 (GCC 8.0.1).

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7368 
Closes #7826 
Closes #7830
2018-08-26 12:55:44 -07:00
LOLi c434d8806c Stack overflow when destroying deeply nested clones
Destroy operations on deeply nested chains of clones can overflow
the stack:

        Depth    Size   Location    (221 entries)
        -----    ----   --------
  0)    15664      48   mutex_lock+0x5/0x30
  1)    15616       8   mutex_lock+0x5/0x30
...
 26)    13576      72   dsl_dataset_remove_clones_key.isra.4+0x124/0x1e0 [zfs]
 27)    13504      72   dsl_dataset_remove_clones_key.isra.4+0x18a/0x1e0 [zfs]
 28)    13432      72   dsl_dataset_remove_clones_key.isra.4+0x18a/0x1e0 [zfs]
...
185)     2128      72   dsl_dataset_remove_clones_key.isra.4+0x18a/0x1e0 [zfs]
186)     2056      72   dsl_dataset_remove_clones_key.isra.4+0x18a/0x1e0 [zfs]
187)     1984      72   dsl_dataset_remove_clones_key.isra.4+0x18a/0x1e0 [zfs]
188)     1912     136   dsl_destroy_snapshot_sync_impl+0x4e0/0x1090 [zfs]
189)     1776      16   dsl_destroy_snapshot_check+0x0/0x90 [zfs]
...
218)      304     128   kthread+0xdf/0x100
219)      176      48   ret_from_fork+0x22/0x40
220)      128     128   kthread+0x0/0x100

Fix this issue by converting dsl_dataset_remove_clones_key() from
recursive to iterative.

Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7279 
Closes #7810
2018-08-22 11:03:31 -07:00
Tom Caputi 149ce888bb Fix issues with raw receive_write_byref()
This patch fixes 2 issues with raw, deduplicated send streams. The
first is that datasets who had been completely received earlier in
the stream were not still marked as raw receives. This caused
problems when newly received datasets attempted to fetch raw data
from these datasets without this flag set.

The second problem was that the arc freeze checksum code was not
consistent about which locks needed to be held while performing
its asserts. The proper locking needed to run these asserts is
actually fairly nuanced, since the asserts touch the linked list
of buffers (requiring the header lock), the arc_state (requiring
the b_evict_lock), and the b_freeze_cksum (requiring the
b_freeze_lock). This seems like a large performance sacrifice and
a lot of unneeded complexity to verify that this relatively small
debug feature is working as intended, so this patch simply removes
these asserts instead.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7701
2018-08-20 11:03:56 -07:00
Olaf Faaland 34fe773e30 Skip import activity test in more zdb code paths
Since zdb opens the pools read-only, it cannot damage the pool in the
event the pool is already imported either on the same host or on
another one.

If the pool vdev structure is changing while zdb is importing the
pool, it may cause zdb to crash.  However this is unlikely, and in any
case it's a user space process and can simply be run again.

For this reason, zdb should disable the multihost activity test on
import that is normally run.

This commit fixes a few zdb code paths where that had been overlooked.
It also adds tests to ensure that several common use cases handle this
properly in the future.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gu Zheng <guzheng2331314@163.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7797 
Closes #7801
2018-08-20 10:05:23 -07:00
Serapheim Dimitropoulos a448a2557e Introduce read/write kstats per dataset
The following patch introduces a few statistics on reads and writes
grouped by dataset. These statistics are implemented as kstats
(backed by aggregate sums for performance) and can be retrieved by
using the dataset objset ID number. The motivation for this change is
to provide some preliminary analytics on dataset usage/performance.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #7705
2018-08-20 09:52:37 -07:00
bunder2015 fa84714abb ZTS: events path cleanup
Removing hardcoded paths in events.cfg

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7805
2018-08-18 21:19:41 -07:00
bunder2015 80d45e089c ZTS: largest_pool_001 path cleanup
Removing hardcoded paths in largest_pool_001

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7804
2018-08-18 21:18:31 -07:00
bunder2015 5468ee7a2f ZTS: privilege group path cleanup
Removing hardcoded paths in privilege group tests

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7803
2018-08-18 21:17:22 -07:00
Brian Behlendorf 089b16f48d
ZTS: Fix import_cache_device_replaced
Allow the 'zpool replace' to run slowly without overwhelming the vdev
queues by setting zfs_scan_vdev_limit=128k.  This limits the number of
concurrent slow IOs which need to be handled.  The net effect is the
test case runs approximately 3x faster putting it well under the 10
minute per-test time limit.

Rename import_cache* test cases to imprt_cachefile*.  Originally
these were renamed due to a maximum tar name limit, this limit was
removed by commit 1dfde3d9b.

Replaced instances of /var/tmp in zpool_import.cfg with $TEST_BASE_DIR.

Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7765 
Closes #7802
2018-08-18 21:16:12 -07:00
Brian Behlendorf 802715b74a
ZTS: Fix reservation_001_pos
It's possible for an unrelated process, like blkid, to have the
volume open when 'zfs destroy' is run.  Switch the cleanup function
to the destroy_dataset() helper which handles this case by retrying
the destroy when the dataset is busy.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7796
2018-08-17 10:01:47 -07:00
Brian Behlendorf 1dfde3d9b2
Use posix format for dist tarballs
Traditionally Automake has defaulted to the V7 tar format when
creating tarballs for distributions.  One of the many limitions
of this format is a 99 character maximum path + file name limit.
This can cause problems when adding new test cases to the ZTS
due to the depth of the sub-tree and descriptive test names.

This change switches the build system to the posix (aliased as
pax) tar format which conforms to the POSIX.1-2001 specification.
This format does not suffer from the V7 limitations, was designed
to be compatible, and will become the default format in future
versions of GNU tar.

https://www.gnu.org/software/tar/manual/html_chapter/tar_8.html

As part of this change the blockfiles directories which were
originally removed due to this limit have been readded.

Reviewed by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7767
2018-08-15 09:52:28 -07:00
Tom Caputi d9c460a0b6 Added encryption support for zfs recv -o / -x
One small integration that was absent from b52563 was
support for zfs recv -o / -x with regards to encryption
parameters. The main use cases of this are as follows:

* Receiving an unencrypted stream as encrypted without
  needing to create a "dummy" encrypted parent so that
  encryption can be inheritted.

* Allowing users to change their keylocation on receive,
  so long as the receiving dataset is an encryption root.

* Allowing users to explicitly exclude or override the
  encryption property from an unencrypted properties stream,
  allowing it to be received as encrypted.

* Receiving a recursive heirarchy of unencrypted datasets,
  encrypting the top-level one and forcing all children to
  inherit the encryption.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7650
2018-08-15 09:48:49 -07:00
bunder2015 64e96969a8 ZTS: delegate group path cleanup
Removing hardcoded paths in delegate group tests

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7778
2018-08-13 08:24:02 -07:00
bunder2015 d02fa81c78 ZTS: acl group path cleanup
Removing hardcoded paths in acl group tests

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7777
2018-08-13 08:22:41 -07:00
bunder2015 604016054e ZTS: inuse_004 path cleanup
Removing hardcoded path in inuse_004

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7775
2018-08-13 08:16:55 -07:00
bunder2015 5fba582887 ZTS: projectquota_002 path cleanup
Removing hardcoded path in projectquota_002

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7774
2018-08-13 08:15:53 -07:00
Brian Behlendorf 94b197a0a5
ZTS: Test case reliability
* Both cli_root/zpool_import/import_cache_device_replaced, and
  redundancy/redundancy_004_neg have been observed to fail for
  spurious reasons ~1% of the time.  Add them to the exception
  list and reference the open Github issue.

* Speed up replacement/replacement_001_pos to prevent it from
  exceeding the 10 minute per test limit and getting KILLED.
  File vdev creation switched to truncate -s, redundant raidz1
  testing pass dropped, fixed some minor formating issues.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7766
2018-08-12 09:38:53 -07:00
LOLi c8c308362c Allow inherited properties in zfs_check_settable()
This change modifies how 'checksum' and 'dedup' properties are verified
in zfs_check_settable() handling the case where they are explicitly
inherited in the dataset hierarchy when receiving a recursive send
stream.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7755 
Closes #7576 
Closes #7757
2018-08-03 14:56:25 -07:00
Brian Behlendorf 6da0998f59
ZTS: Fix zfs_create_007_pos
It's possible for an unrelated process, like blkid, to have the
volume open when 'zfs destroy' is run.  Switch the cleanup function
to the destroy_dataset() helper which handles this case by retrying
the destroy when the dataset is busy.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7763
2018-08-03 10:21:50 -07:00
Paul Dagnelie 492f64e941 OpenZFS 9112 - Improve allocation performance on high-end systems
Overview
========

We parallelize the allocation process by creating the concept of
"allocators". There are a certain number of allocators per metaslab
group, defined by the value of a tunable at pool open time.  Each
allocator for a given metaslab group has up to 2 active metaslabs; one
"primary", and one "secondary". The primary and secondary weight mean
the same thing they did in in the pre-allocator world; primary metaslabs
are used for most allocations, secondary metaslabs are used for ditto
blocks being allocated in the same metaslab group.  There is also the
CLAIM weight, which has been separated out from the other weights, but
that is less important to understanding the patch.  The active metaslabs
for each allocator are moved from their normal place in the metaslab
tree for the group to the back of the tree. This way, they will not be
selected for use by other allocators searching for new metaslabs unless
all the passive metaslabs are unsuitable for allocations.  If that does
happen, the allocators will "steal" from each other to ensure that IOs
don't fail until there is truly no space left to perform allocations.

In addition, the alloc queue for each metaslab group has been broken
into a separate queue for each allocator. We don't want to dramatically
increase the number of inflight IOs on low-end systems, because it can
significantly increase txg times. On the other hand, we want to ensure
that there are enough IOs for each allocator to allow for good
coalescing before sending the IOs to the disk.  As a result, we take a
compromise path; each allocator's alloc queue max depth starts at a
certain value for every txg. Every time an IO completes, we increase the
max depth. This should hopefully provide a good balance between the two
failure modes, while not dramatically increasing complexity.

We also parallelize the spa_alloc_tree and spa_alloc_lock, which cause
very similar contention when selecting IOs to allocate. This
parallelization uses the same allocator scheme as metaslab selection.

Performance Results
===================

Performance improvements from this change can vary significantly based
on the number of CPUs in the system, whether or not the system has a
NUMA architecture, the speed of the drives, the values for the various
tunables, and the workload being performed. For an fio async sequential
write workload on a 24 core NUMA system with 256 GB of RAM and 8 128 GB
SSDs, there is a roughly 25% performance improvement.

Future Work
===========

Analysis of the performance of the system with this patch applied shows
that a significant new bottleneck is the vdev disk queues, which also
need to be parallelized.  Prototyping of this change has occurred, and
there was a performance improvement, but more work needs to be done
before its stability has been verified and it is ready to be upstreamed.

Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>

Porting Notes:
* Fix reservation test failures by increasing tolerance.

OpenZFS-issue: https://illumos.org/issues/9112
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3f3cc3c3
Closes #7682
2018-07-31 10:52:33 -07:00
Paul Dagnelie 21d48b5eac OpenZFS 9438 - Holes can lose birth time info if a block has a mix of birth times
As reported by https://github.com/zfsonlinux/zfs/issues/4996, there is
yet another hole birth issue. In this one, if a block is entirely holes,
but the birth times are not all the same, we lose that information by
creating one hole with the current txg as its birth time.

The ZoL PR's fix approach is incorrect. Ultimately, the problem here is
that when you truncate and write a file in the same transaction group,
the dbuf for the indirect block will be zeroed out to deal with the
truncation, and then written for the write. During this process, we will
lose hole birth time information for any holes in the range. In the case
where a dnode is being freed, we need to determine whether the block
should be converted to a higher-level hole in the zio pipeline, and if
so do it when the dnode is being synced out.

Porting Notes:
* The DMU_OBJECT_END change in zfs_znode.c was already applied.
* Added test cases from #5675 provided by @rincebrain for hole_birth
  issues.  These test cases should be pushed upstream to OpenZFS.
* Updated mk_files which is used by several rsend tests so the
  files created are a little more interesting and may contain holes.

Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/9438
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/738e2a3c
External-issue: DLPX-46861
Closes #7746
2018-07-30 09:27:49 -07:00
Brian Behlendorf b719768e35
ZTS: Fix reservation_017_pos
It's possible for an unrelated process, like blkid, to have the
volume open when 'zfs destroy' is run.  Switch the cleanup function
to the destroy_dataset() helper which handles this case by retrying
the destroy when the dataset is busy.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7750
2018-07-30 09:23:45 -07:00
Brian Behlendorf e106a7bacb
ZTS: Add reservation_008_pos exception
The reservation_008_pos test case has been observed to fail in
a non-dangerous way in approximately 5% of automated test runs.
Add the test case to the list of possible expected failures
until the test case can be made perfectly reliable.

Reviewed by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7741 
Closes #7742
2018-07-25 10:15:39 -07:00
Brian Behlendorf d441e85dd7
Add support for autoexpand property
While the autoexpand property may seem like a small feature it
depends on a significant amount of system infrastructure.  Enough
of that infrastructure is now in place that with a few modifications
for Linux it can be supported.

Auto-expand works as follows; when a block device is modified
(re-sized, closed after being open r/w, etc) a change uevent is
generated for udev.  The ZED, which is monitoring udev events,
passes the change event along to zfs_deliver_dle() if the disk
or partition contains a zfs_member as identified by blkid.

From here the device is matched against all imported pool vdevs
using the vdev_guid which was read from the label by blkid.  If
a match is found the ZED reopens the pool vdev.  This re-opening
is important because it allows the vdev to be briefly closed so
the disk partition table can be re-read.  Otherwise, it wouldn't
be possible to report the maximum possible expansion size.

Finally, if the property autoexpand=on a vdev expansion will be
attempted.  After performing some sanity checks on the disk to
verify that it is safe to expand,  the primary partition (-part1)
will be expanded and the partition table updated.  The partition
is then re-opened (again) to detect the updated size which allows
the new capacity to be used.

In order to make all of the above possible the following changes
were required:

* Updated the zpool_expand_001_pos and zpool_expand_003_pos tests.
  These tests now create a pool which is layered on a loopback,
  scsi_debug, and file vdev.  This allows for testing of non-
  partitioned block device (loopback), a partition block device
  (scsi_debug), and a file which does not receive udev change
  events.  This provided for better test coverage, and by removing
  the layering on ZFS volumes there issues surrounding layering
  one pool on another are avoided.

* zpool_find_vdev_by_physpath() updated to accept a vdev guid.
  This allows for matching by guid rather than path which is a
  more reliable way for the ZED to reference a vdev.

* Fixed zfs_zevent_wait() signal handling which could result
  in the ZED spinning when a signal was not handled.

* Removed vdev_disk_rrpart() functionality which can be abandoned
  in favor of kernel provided blkdev_reread_part() function.

* Added a rwlock which is held as a writer while a disk is being
  reopened.  This is important to prevent errors from occurring
  for any configuration related IOs which bypass the SCL_ZIO lock.
  The zpool_reopen_007_pos.ksh test case was added to verify IO
  error are never observed when reopening.  This is not expected
  to impact IO performance.

Additional fixes which aren't critical but were discovered and
resolved in the course of developing this functionality.

* Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for
  ZFS volumes.  This is as good as a unique physical path, while the
  volumes are not used in the test cases anymore for other reasons
  this improvement was included.

Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #120
Closes #2437
Closes #5771
Closes #7366
Closes #7582
Closes #7629
2018-07-23 15:40:15 -07:00
Matthew Ahrens 2e5dc449c1 OpenZFS 9337 - zfs get all is slow due to uncached metadata
This project's goal is to make read-heavy channel programs and zfs(1m)
administrative commands faster by caching all the metadata that they will
need in the dbuf layer. This will prevent the data from being evicted, so
that any future call to i.e. zfs get all won't have to go to disk (very
much). There are two parts:

The dbuf_metadata_cache. We identify what to put into the cache based on
the object type of each dbuf.  Caching objset properties os
{version,normalization,utf8only,casesensitivity} in the objset_t. The reason
these needed to be cached is that although they are queried frequently,
they aren't stored in a dbuf type which we can easily recognize and cache in
the dbuf layer; instead, we have to explicitly store them. There's already
existing infrastructure for maintaining cached properties in the objset
setup code, so I simply used that.

Performance Testing:

 - Disabled kmem_flags
 - Tuned dbuf_cache_max_bytes very low (128K)
 - Tuned zfs_arc_max very low (64M)

Created test pool with 400 filesystems, and 100 snapshots per filesystem.
Later on in testing, added 600 more filesystems (with no snapshots) to make
sure scaling didn't look different between snapshots and filesystems.

Results:

    | Test                   | Time (trunk / diff) | I/Os (trunk / diff) |
    +------------------------+---------------------+---------------------+
    | zpool import           |     0:05 / 0:06     |    12.9k / 12.9k    |
    | zfs get all (uncached) |     1:36 / 0:53     |    16.7k / 5.7k     |
    | zfs get all (cached)   |     1:36 / 0:51     |    16.0k / 6.0k     |

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>

OpenZFS-issue: https://illumos.org/issues/9337
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f
Closes #7668
2018-07-12 10:49:27 -07:00
Serapheim Dimitropoulos a7ed98d8b5 OpenZFS 9330 - stack overflow when creating a deeply nested dataset
Datasets that are deeply nested (~100 levels) are impractical. We just
put a limit of 50 levels to newly created datasets. Existing datasets
should work without a problem.

The problem can be seen by attempting to create a dataset using the -p
option with many levels:

    panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff

    fffffffffbc3aa60 unix:die+100 ()
    fffffffffbc3ab70 unix:trap+157d ()
    ffffff00083d7020 unix:_patch_xrstorq_rbx+196 ()
    ffffff00083d7050 zfs:dbuf_rele+2e ()
    ...
    ffffff00083d7080 zfs:dsl_dir_close+32 ()
    ffffff00083d70b0 zfs:dsl_dir_evict+30 ()
    ffffff00083d70d0 zfs:dbuf_evict_user+4a ()
    ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 ()
    ffffff00083d7130 zfs:dbuf_rele+2e ()
    ... The block above repeats once per directory in the ...
    ... create -p command, working towards the root ...
    ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 ()
    ffffff00083dba20 zfs:dsl_dataset_rele+42 ()
    ffffff00083dba70 zfs:dmu_objset_prefetch+e4 ()
    ffffff00083dbaa0 zfs:findfunc+23 ()
    ffffff00083dbb80 zfs:dmu_objset_find_spa+38c ()
    ffffff00083dbbc0 zfs:dmu_objset_find+40 ()
    ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b ()
    ffffff00083dbcc0 zfs:zfsdev_ioctl+347 ()
    ffffff00083dbd00 genunix:cdev_ioctl+45 ()
    ffffff00083dbd40 specfs:spec_ioctl+5a ()
    ffffff00083dbdc0 genunix:fop_ioctl+7b ()
    ffffff00083dbec0 genunix:ioctl+18e ()
    ffffff00083dbf10 unix:brand_sys_sysenter+1c9 ()

Porting notes:
* Added zfs_max_dataset_nesting module option with documentation.
* Updated zfs_rename_014_neg.ksh for Linux.
* Increase the zfs.sh stack warning to 15K.  Enough time has passed
  that 16K can be reasonably assumed to be the default value.  It
  was increased in the 3.15 kernel released in June of 2014.

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>

OpenZFS-issue: https://www.illumos.org/issues/9330
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a
Closes #7681
2018-07-09 13:02:50 -07:00
Brian Behlendorf 66df02497c
ZTS: clean_mirror and scrub_mirror cleanup
Remove the dependency on partitionable devices for the clean_mirror
and scrub_mirror test cases.  This allows for the setup and cleanup
of the test cases to be simplified by removing the need for complex
partitioning.

This change also resolves a issue where the clean_mirror devices
were not being properly damaged since the device name was not a
full path.  The result being loopX files were being left in the
top level test_results directory.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7434 
Closes #7690
2018-07-09 12:46:14 -07:00
Serapheim Dimitropoulos 4d044c4c1d OpenZFS 9238 - ZFS Spacemap Encoding V2
Motivation
==========

The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
    This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
    device removal, zpool checkpoint) we've started imposing limits in the
    vdevs that can be used with them based on the maximum addressable offset
    (currently 64PB for a top-level vdev).

New encoding
============

The layout can be found at space_map.h and it remains backwards compatible with
the old one. The introduced two-word entry format, besides extending the limits
imposed by the single-entry layout, also includes a vdev field and some extra
padding after its prefix.

The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps (expected to be used in the log spacemap project).

One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and we wanted to fit the vdev field
in the space map. In addition that gives us some extra bits in dva_t.

Other references:
=================

The new encoding is also discussed towards the end of the Log Space Map
presentation from 2017's OpenZFS summit.
Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d
OpenZFS-issue: https://www.illumos.org/issues/9238
Closes #7665
2018-07-05 12:02:34 -07:00
Ahmed Gahnem 4e82b4be78 OpenZFS 9184 - Add ZFS performance test for fixed blocksize random read/write IO
This change introduces a new performance test which does random reads
and writes, but instead of using `bssplit` to determine the block size,
it uses a fixed blocksize. Additionally, some new IO sizes are added to
other tests and timestamp data is recorded with the performance data.

Authored by: Ahmed Gahnem <ahmedg@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: John Wren Kennedy <john.kennedy@delphix.com>
Requires-builders: perf

OpenZFS-issue: https://www.illumos.org/issues/9184
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/659
External-issue: DLPX-46724
Closes #7660
2018-07-02 13:46:06 -07:00
Brian Behlendorf e03a41a604
ZTS: Improve enospc tests
The enospc_002_pos test case would frequently fail due a command
succeeding when it was expected to fail due to lack of space.
In order to make this far less likely, files are created across
multiple transaction groups in order to consume as many unused
blocks as possible.

The dependency that the tests run on a partitioned block device
has been removed.  It's simpler to use sparse files.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7663
2018-06-29 09:40:32 -07:00
Serapheim Dimitropoulos d2734cce68 OpenZFS 9166 - zfs storage pool checkpoint
Details about the motivation of this feature and its usage can
be found in this blogpost:

    https://sdimitro.github.io/post/zpool-checkpoint/

A lightning talk of this feature can be found here:
https://www.youtube.com/watch?v=fPQA8K40jAM

Implementation details can be found in big block comment of
spa_checkpoint.c

Side-changes that are relevant to this commit but not explained
elsewhere:

* renames members of "struct metaslab trees to be shorter without
  losing meaning

* space_map_{alloc,truncate}() accept a block size as a
  parameter. The reason is that in the current state all space
  maps that we allocate through the DMU use a global tunable
  (space_map_blksz) which defauls to 4KB. This is ok for metaslab
  space maps in terms of bandwirdth since they are scattered all
  over the disk. But for other space maps this default is probably
  not what we want. Examples are device removal's vdev_obsolete_sm
  or vdev_chedkpoint_sm from this review. Both of these have a
  1:1 relationship with each vdev and could benefit from a bigger
  block size.

Porting notes:

* The part of dsl_scan_sync() which handles async destroys has
  been moved into the new dsl_process_async_destroys() function.

* Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write
  to block device backed pools.

* ZTS:
  * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg".

  * Don't use large dd block sizes on /dev/urandom under Linux in
    checkpoint_capacity.

  * Adopt Delphix-OS's setting of 4 (spa_asize_inflation =
    SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed
    its attempts to fill the pool

  * Create the base and nested pools with sync=disabled to speed up
    the "setup" phase.

  * Clear labels in test pool between checkpoint tests to avoid
    duplicate pool issues.

  * The import_rewind_device_replaced test has been marked as "known
    to fail" for the reasons listed in its DISCLAIMER.

  * New module parameters:

      zfs_spa_discard_memory_limit,
      zfs_remove_max_bytes_pause (not documented - debugging only)
      vdev_max_ms_count (formerly metaslabs_per_vdev)
      vdev_min_ms_count

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9166
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8
Closes #7570
2018-06-26 10:07:42 -07:00
Tim Chase 88eaf610d9 Use "eval" in history_002_pos for log_must
Otherwise the output is consumed by the output redirection.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #7570
2018-06-26 09:58:05 -07:00
Serapheim Dimitropoulos 7637ef8d23 OpenZFS 9591 - ms_shift can be incorrectly changed
ms_shift can be incorrectly changed changed in MOS config for
indirect vdevs that have been historically expanded

According to spa_config_update() we expect new vdevs to have
vdev_ms_array equal to 0 and then we go ahead and set their metaslab
size. The problem is that indirect vdevs also have vdev_ms_array == 0
because their metaslabs are destroyed once their removal is done.

As a result, if a vdev was expanded and then removed may have its
ms_shift changed if another vdev was added after its removal.
Fortunately this behavior does not cause any type of crash or bad
behavior in the kernel but it can confuse zdb and anyone doing any kind
of analysis of the history of the pools.

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>

OpenZFS-commit: https://github.com/openzfs/openzfs/pull/651
OpenZFS-issue: https://illumos.org/issues/9591a
External-issue: DLPX-58879
Closes #7644
2018-06-21 09:35:26 -07:00
Brian Behlendorf e4a3297a04
ZTS: Adopt OpenZFS test analysis script
Adopt and extend the OpenZFS ZTS results analysis script for use
with ZFS on Linux.  This allows for automatic analysis of tests
which may be skipped for a variety or reasons or which are not
entirely reliable.

In addition to the list of 'known' failures, which have been updated
for ZFS on Linux, there in a new 'maybe' section.  This mapping
include tests which might be correctly skipped depending on the
test environment.  This may be because of a missing dependency or
lack of required kernel support.  This list also includes tests
which normally pass but might on occasion fail for a harmless
reason.

The script was also extended include a reason for why a given test
might be skipped or may fail.  The reason will be included after
the test in the "results other than PASS that are expected" section.
For failures it is preferable to set the reason to the GitHub issue
number and for skipped tests several generic reasons are available.
You may also specify a custom reason if needed.

All tests were added back in to the linux.run file even if they are
expected to failed.  There is value in running tests which may not
pass, the expected results for these tests has been encoded in
the new analysis script.

All tests which were disabled because they ran more slowly on a
32-bit system have been re-enabled.  Developers working on 32-bit
systems should assess what it reasonable for their environment.

The unnecessary dependency on physical block devices was removed for
the checksum, grow_pool, and grow_replicas test groups so they are
no longer skipped.  Updated the filetest_001_pos test case to run
properly now that it is enabled and moved the grow tests in to a
single directory.

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7638
2018-06-20 14:03:13 -07:00
John Gallagher 917f475fba Add tunables for channel programs
This patch adds tunables for modifying the maximum memory limit and
maximum instruction limit that can be specified when running a channel
program.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
External-issue: LX-1085
Closes #7618
2018-06-15 15:10:42 -07:00
John Gallagher ab24877bd3 ZTS: deletes home directories in /export/home
In the cleanup for the privilege tests, an empty variable, empty because
the corresponding setup is skipped on Linux, results in /export/home
being deleted. This patch adds an assertion that the variable is not
empty, and causes the cleanup to be skipped on Linux as well.

Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
External-issue: LX-1099
Closes #7615
2018-06-12 10:42:26 -07:00
bunder2015 5277571260 ZTS: cleanup user_run
user_run leaves two files in /tmp, moving them to $TEST_BASE_DIR and
adding them to the default cleanup routine.

Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7614
2018-06-12 10:37:12 -07:00
Antonio Russo 39042f9736 Tunable directory for zfs runtime scripts
zpool and zed place scripts in subdirectories of libexecdir. Some
distributions locate architecture independent scripts in other locations
(e.g. Debian). To avoid these paths getting out of sync, centralize the
definitions.

Build zfs-test's default.cfg by Makefile.  Use the new directory
logic building tests/zfs-tests/include/default.cfg.in.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #7597
2018-06-07 09:59:59 -07:00
Antonio Russo 7106b23640 Minor documentation, logging, and testing typos
This patch collects some minor inconsistencies and typos in the
documentation, logging and testing infrastructure.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #7608
2018-06-07 09:38:39 -07:00
Alek P 6969afcefd Always continue recursive destroy after error
Currently, during a recursive zfs destroy the first error that is
encountered will stop the destruction of the datasets. Errors may
happen for a variety of reasons including competing deletions
and busy datasets.
This patch switches recursive destroy to always do a best-effort
recursive dataset destroy.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #7574
2018-06-06 10:14:52 -07:00
bunder2015 62841115bc ZTS: history path cleanup
History tests were hard coded to use /tmp and didn't clean up
properly after testing.

Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Issue #7507 
Closes #7600
2018-06-06 10:00:22 -07:00
Tony Hutter f0ed6c7448 Add pool state /proc entry, "SUSPENDED" pools
1. Add a proc entry to display the pool's state:

$ cat /proc/spl/kstat/zfs/tank/state
ONLINE

This is done without using the spa config locks, so it will
never hang.

2. Fix 'zpool status' and 'zpool list -o health' output to print
"SUSPENDED" instead of "ONLINE" for suspended pools.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7331 
Closes #7563
2018-06-06 09:33:54 -07:00
John Wren Kennedy ab44e511e2 OpenZFS 9245 - zfs-test failures: slog_013_pos and slog_014_pos
Test 13 would fail because of attempts to zpool destroy -f a pool that
was still busy. Changed those calls to destroy_pool which does a retry
loop, and the problem is no longer reproducible. Also removed some non
functional code in the test which is why it was originally commented out
by placing it after the call to log_pass.

Test 14 would fail because sometimes the check for a degraded pool would
complete before the pool had changed state. Changed the logic to check
in a loop with a timeout and the problem is no longer reproducible.

Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
* Re-enabled slog_013_pos.ksh

OpenZFS-issue: https://illumos.org/issues/9245
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8f323b5
Closes #7585
2018-06-04 14:55:02 -07:00
Sara Hartse 74d42600d8 zpool reopen should detect expanded devices
Update bdev_capacity to have wholedisk vdevs query the
size of the underlying block device (correcting for the size
of the efi parition and partition alignment) and therefore detect
expanded space.

Correct vdev_get_stats_ex so that the expandsize is aligned
to metaslab size and new space is only reported if it is large
enough for a new metaslab.

Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
External-issue: LX-165
Closes #7546 
Issue #7582
2018-05-31 10:36:37 -07:00
John Wren Kennedy 93491c4bb9 OpenZFS 9082 - Add ZFS performance test targeting ZIL latency
This adds a new test to measure ZIL performance.

- Adds the ability to induce IO delays with zinject
- Adds a new variable (PERF_NTHREADS_PER_FS) to allow fio threads to
  be distributed to individual file systems as opposed to all IO going
  to one, as happens elsewhere.
- Refactoring of do_fio_run

Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: John Wren Kennedy <jwk404@gmail.com>

OpenZFS-issue: https://www.illumos.org/issues/9082
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/634
External-issue: DLPX-48625
Closes #7491
2018-05-30 11:59:04 -07:00
Brian Behlendorf 93ce2b4ca5 Update build system and packaging
Minimal changes required to integrate the SPL sources in to the
ZFS repository build infrastructure and packaging.

Build system and packaging:
  * Renamed SPL_* autoconf m4 macros to ZFS_*.
  * Removed redundant SPL_* autoconf m4 macros.
  * Updated the RPM spec files to remove SPL package dependency.
  * The zfs package obsoletes the spl package, and the zfs-kmod
    package obsoletes the spl-kmod package.
  * The zfs-kmod-devel* packages were updated to add compatibility
    symlinks under /usr/src/spl-x.y.z until all dependent packages
    can be updated.  They will be removed in a future release.
  * Updated copy-builtin script for in-kernel builds.
  * Updated DKMS package to include the spl.ko.
  * Updated stale AUTHORS file to include all contributors.
  * Updated stale COPYRIGHT and included the SPL as an exception.
  * Renamed README.markdown to README.md
  * Renamed OPENSOLARIS.LICENSE to LICENSE.
  * Renamed DISCLAIMER to NOTICE.

Required code changes:
  * Removed redundant HAVE_SPL macro.
  * Removed _BOOT from nvpairs since it doesn't apply for Linux.
  * Initial header cleanup (removal of empty headers, refactoring).
  * Remove SPL repository clone/build from zimport.sh.
  * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due
    to build issues when forcing C99 compilation.
  * Replaced legacy ACCESS_ONCE with READ_ONCE.
  * Include needed headers for `current` and `EXPORT_SYMBOL`.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes #7556
2018-05-29 16:00:33 -07:00
Tony Nguyen ba863d0be4 Profiling for perf tests
Stack profiling is quite useful and Linux ZFS test suite does not
current collect that data.

Linux perf is a common tool for this purpose though the perf record
data file can be quite large. With this change, Linux ZFS perf tests
capture perf record data if perf is installed on the system and
PERF_DO_PROFILING environment variable is set.

Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com>
External-issue: LX-971
Closes #7549
2018-05-22 10:51:46 -07:00
George Melikov f46209dd6b Update `tests/README.md` and fix markdown
- there are more options now
- command examples are more readable in code style

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #7538
2018-05-15 09:01:28 -07:00
Brian Behlendorf ab6a2b5cd7
ZTS: Improve zpool_scrub_004_pos reliability
It's possible for the `zpool attach` portion of this test case
to complete before the `zpool scrub` can be issued.  Update the
test case to force the resilvering phase to take longer.

Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5444 
Closes #7541
2018-05-15 08:58:46 -07:00
Brian Behlendorf 8c64fe0442
ZTS: Update O_TMPFILE support check
In CentOS 7.5 the kernel provided a compatibility wrapper to support
O_TMPFILE.  This results in the test setup script correctly detecting
kernel support.  But the ZFS module was built without O_TMPFILE
support due to the non-standard CentOS kernel interface.

Handle this case by updating the setup check to fail either when
the kernel or the ZFS module fail to provide support.  The reason
will be clearly logged in the test results.

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7528
2018-05-14 20:36:30 -07:00
Pavel Zakharov 189bd0b670 OpenZFS 9190 - Fix cleanup routine in import_cachefile_device_replaced.ksh
Must clear slow-disk zinject injections in test cleanup routine.
Otherwise, when this test fails, it causes most subsequent tests
to fail.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9190
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/762c6b4
Closes #7530
2018-05-14 14:30:28 -04:00
bunder2015 29badadd4e Fix shebangs on import tests
Incorrect shebangs were used when porting.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7523  
Closes #7524
2018-05-11 12:37:44 -07:00
bunder2015 670d74b9ce ZTS: enospc_002 path cleanup
Removing hard-coded path used in enospc_002

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7515
2018-05-08 21:42:58 -07:00
Tim Chase f3d28f0a59 Streamline the zpool_import tests
Don't create an ext4 file system atop $DEV_DISKDIR/$DISK2.
There's likely to not be sufficient space for it to succeed.
Instead, simply create the vdev files in the directory where it
would have been mounted.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7459
2018-05-08 21:40:13 -07:00
Pavel Zakharov 6cb8e5306d OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:

	7638 Refactor spa_load_impl into several functions
	8961 SPA load/import should tell us why it failed
	7277 zdb should be able to print zfs_dbgmsg's

To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.

The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.

The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.

When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.

This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.

With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
of data, this feature is for now restricted to a read-only import.

Porting notes (ZTS):
* Fix 'make dist' target in zpool_import

* The maximum path length allowed by tar is 99 characters.  Several
  of the new test cases exceeded this limit resulting in them not
  being included in the tarball.  Shorten the names slightly.

* Set/get tunables using accessor functions.

* Get last synced txg via the "zfs_txg_history" mechanism.

* Clear zinject handlers in cleanup for import_cache_device_replaced
  and import_rewind_device_replaced in order that the zpool can be
  exported if there is an error.

* Increase FILESIZE to 8G in zfs-test.sh to allow for a larger
  ext4 file system to be created on ZFS_DISK2.  Also, there's
  no need to partition ZFS_DISK2 at all.  The partitioning had
  already been disabled for multipath devices.  Among other things,
  the partitioning steals some space from the ext4 file system,
  makes it difficult to accurately calculate the paramters to
  parted and can make some of the tests fail.

* Increase FS_SIZE and FILE_SIZE in the zpool_import test
  configuration now that FILESIZE is larger.

* Write more data in order that device evacuation take lonnger in
  a couple tests.

* Use mkdir -p to avoid errors when the directory already exists.

* Remove use of sudo in import_rewind_config_changed.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9075
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123
Closes #7459
2018-05-08 21:35:27 -07:00
Paul Dagnelie ca0845d59e OpenZFS 9256 - zfs send space estimation off by > 10% on some datasets
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
* Added tuning to man page.
* Test case changes dropped, default behavior unchanged.

OpenZFS-issue: https://www.illumos.org/issues/9256
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/32356b3c56
Closes #7470
2018-05-08 08:59:24 -07:00
LOLi 4ceb8dd6fd Fix 'zpool create -t <tempname>'
Creating a pool with a temporary name fails when we also specify custom
dataset properties: this is because we mistakenly call
zfs_set_prop_nvlist() on the "real" pool name which, as expected,
cannot be found because the SPA is present in the namespace with the
temporary name.

Fix this by specifying the correct pool name when setting the dataset
properties.

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7502 
Closes #7509
2018-05-07 21:11:58 -07:00
Brian Behlendorf c02c1becce
ZTS: Re-enable MMP tests
Commit 7fab6361 inadvertently disabled the MMP test cases by creating
and not removing an /etc/hostid file in the new zpool_split_props test
case.  When the file exists the ZTS skips the entire MMP test group
rather than modify what may be a system which is already configured.
Update the test case to remove the file.

Additionally, because the MMP tests were disabled a regression slipped
in as part of commit 9eb7b46ed0.  Fix it.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7514
2018-05-07 21:08:33 -07:00
bunder2015 a82a4a15be ZTS: remove dead cleanup code from snapshot tests
Caught during path cleanups, the files referenced do not appear to be
created or used anywhere.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #7508
2018-05-06 21:02:10 -07:00
LOLi fb0da71fd9 ZTS: Fix zfs_diff_timestamp
When using mawk instead of gawk zfs_diff_timestamp fails consistently:
this is due to a subtle difference in how mawk handles substr().

From awk(1):
---
Finally, here is how mawk handles exceptional cases not discussed in
the AWK book or the Posix draft.  It is unsafe to assume consistency
across awks and safe to skip to the next section.
substr(s,  i,  n) returns the characters of s in the intersection of
the closed interval [1, length(s)] and the half-open interval [i, i+n).
When this intersection is empty, the empty string is returned; so
substr("ABC", 1, 0) = "" and substr("ABC", -4, 6) = "A".
---

To support running zfs_diff_timestamp with both gawk and mawk change
the second parameter passed to substr().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7503 
Closes #7510
2018-05-06 20:42:29 -07:00
Tom Caputi be9a5c355c Add support for decryption faults in zinject
This patch adds the ability for zinject to trigger decryption
and authentication faults in the ZIO and ARC layers. This
functionality is exposed via the new "decrypt" error type, which
may be provided for "data" object types.

This patch also refactors some of the core encryption / decryption
functions so that they have consistent prototypes, handle errors
consistently, and do not have unused arguments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7474
2018-05-02 15:36:20 -07:00
Tom Caputi 2c24b5b148 Fix issues found with zfs diff
Two deadlocks / ASSERT failures were introduced in a2c2ed1b which
would occur whenever arc_buf_fill() failed to decrypt a block of
data. This occurred because the call to arc_buf_destroy() which
was responsible for cleaning up the newly created buffer would
attempt to take out the hdr lock that it was already holding. This
was resolved by calling the underlying functions directly without
retaking the lock.

In addition, the dmu_diff() code did not properly ensure that keys
were loaded and mapped before begining dataset traversal. It turns
out that this code does not need to look at any encrypted values,
so the code was altered to perform raw IO only.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7354 
Closes #7456
2018-05-01 11:24:20 -07:00
loli10K 85ce3f4fd1 Adopt pyzfs from ClusterHQ
This commit introduces several changes:

 * Update LICENSE and project information

 * Give a good PEP8 talk to existing Python source code

 * Add RPM/DEB packaging for pyzfs

 * Fix some outstanding issues with the existing pyzfs code caused by
   changes in the ABI since the last time the code was updated

 * Integrate pyzfs Python unittest with the ZFS Test Suite

 * Add missing libzfs_core functions: lzc_change_key,
   lzc_channel_program, lzc_channel_program_nosync, lzc_load_key,
   lzc_receive_one, lzc_receive_resumable, lzc_receive_with_cmdprops,
   lzc_receive_with_header, lzc_reopen, lzc_send_resume, lzc_sync,
   lzc_unload_key, lzc_remap

Note: this commit slightly changes zfs_ioc_unload_key() ABI. This allow
to differentiate the case where we tried to unload a key on a
non-existing dataset (ENOENT) from the situation where a dataset has
no key loaded: this is consistent with the "change" case where trying
to zfs_ioc_change_key() from a dataset with no key results in EACCES.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7230
2018-05-01 10:33:35 -07:00
LOLi 3cbe89b12a Fix zfs incremental send remove '-o' properties
When receiving an incremental send stream with intermediary snapshots
zfs_receive_one() does not correctly identify the top-level dataset:
consequently we restore said snapshots as if they were children
datasets in the hierarchy, forcing inheritance of any property received
with 'zfs send -o' and effectively removing any locally set value.

The test case did not correctly verify this situation because it uses
adjacent snapshots, basically testing 'zfs send -i' instead of
'zfs send -I': this commit adds an additional intermediary snapshot to
the test script.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7478
2018-04-30 20:58:29 -07:00
Antonio Russo c83ccb3e72 Add test with two kinds of file creation orders
Data loss was identified in #7401 when many small files were copied.
This adds a reproducer for this bug and other similar ones: randomly
generate N files. Then, listing M of them by `ls -U` order, produce
those same files in a directory of the same name.

This triggers the bug consistently, provided N and M are large enough.
Here, N=2^16 and M=2^13.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #7411
2018-04-30 12:45:47 -05:00
LOLi b4555c777a Fix 'zfs remap <poolname@snapname>'
Only filesystems and volumes are valid 'zfs remap' parameters: when
passed a snapshot name zfs_remap_indirects() does not handle the
EINVAL returned from libzfs_core, which results in failing an assertion
and consequently crashing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7454
2018-04-19 09:45:17 -07:00
Chunwei Chen 599b864813 Fix ENOSPC in "Handle zap_add() failures in ..."
Commit cc63068 caused ENOSPC error when copy a large amount of files
between two directories. The reason is that the patch limits zap leaf
expansion to 2 retries, and return ENOSPC when failed.

The intent for limiting retries is to prevent pointlessly growing table
to max size when adding a block full of entries with same name in
different case in mixed mode. However, it turns out we cannot use any
limit on the retry. When we copy files from one directory in readdir
order, we are copying in hash order, one leaf block at a time. Which
means that if the leaf block in source directory has expanded 6 times,
and you copy those entries in that block, by the time you need to expand
the leaf in destination directory, you need to expand it 6 times in one
go. So any limit on the retry will result in error where it shouldn't.

Note that while we do use different salt for different directories, it
seems that the salt/hash function doesn't provide enough randomization
to the hash distance to prevent this from happening.

Since cc63068 has already been reverted. This patch adds it back and
removes the retry limit.

Also, as it turn out, failing on zap_add() has a serious side effect for
mzap_upgrade(). When upgrading from micro zap to fat zap, it will
call zap_add() to transfer entries one at a time. If it hit any error
halfway through, the remaining entries will be lost, causing those files
to become orphan. This patch add a VERIFY to catch it.

Reviewed-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Albert Lee <trisk@forkgnu.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7401 
Closes #7421
2018-04-18 14:19:50 -07:00
Tom Caputi b0ee5946aa Fix issues with raw sends of spill blocks
This patch fixes 2 issues in how spill blocks are processed during
raw sends. The first problem is that compressed spill blocks were
using the logical length rather than the physical length to
determine how much data to dump into the send stream. The second
issue is a typo that caused the spill record's object number to be
used where the objset's ID number was required. Both issues have
been corrected, and the payload_size is now printed in zstreamdump
for future debugging.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7378 
Closes #7432
2018-04-17 11:19:03 -07:00