Commit Graph

946 Commits

Author SHA1 Message Date
Alan Somers e50b5217e7 libzutil: optimize zpool_read_label with AIO
Read all labels in parallel instead of sequentially.

Originally committed as
https://cgit.freebsd.org/src/commit/?id=b49e9abcf44cafaf5cfad7029c9a6adbb28346e8

Obtained from: FreeBSD
Sponsored by: Spectra Logic, Axcient
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11467
2021-01-21 11:24:35 -08:00
Alan Somers ec40ce8405 libzutil: don't read extraneous data in zpool_read_label
zpool_read_label doesn't need the full labels including uberblocks.  It
only needs the vdev_phys_t.  This reduces by half the amount of data
read to check for a label, speeding up "zpool import", "zpool
labelclear", etc.

Originally committed as
https://cgit.freebsd.org/src/commit/?id=63f8025d6acab1b334373ddd33f940a69b3b54cc

Obtained from: FreeBSD
Sponsored by: Spectra Logic Corp, Axcient
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #11467
2021-01-21 11:18:32 -08:00
Brian Atkinson d0cd9a5cc6
Extending FreeBSD UIO Struct
In FreeBSD the struct uio was just a typedef to uio_t. In order to
extend this struct, outside of the definition for the struct uio, the
struct uio has been embedded inside of a uio_t struct.

Also renamed all the uio_* interfaces to be zfs_uio_* to make it clear
this is a ZFS interface.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #11438
2021-01-20 21:27:30 -08:00
Ryan Moeller 60a2434b29
libzfs_sendrecv: Use fnv* to verify nvlist/nvpair*
Use verified variants of nvlist/nvpair functions where applicable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11460
2021-01-14 09:53:09 -08:00
Matthew Ahrens b6722b871b nvlist leaked in zpool_find_config()
In `zpool_find_config()`, the `pools` nvlist is leaked.  Part of it (a
sub-nvlist) is returned in `*configp`, but the callers also leak that.

Additionally, in `zdb.c:main()`, the `searchdirs` is leaked.

The leaks were detected by ASAN (`configure --enable-asan`).

This commit resolves the leaks.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #11396
2020-12-28 10:05:31 -08:00
Brian Behlendorf 1c2358c12a
Linux 5.10 compat: use iov_iter in uio structure
As of the 5.10 kernel the generic splice compatibility code has been
removed.  All filesystems are now responsible for registering a
->splice_read and ->splice_write callback to support this operation.

The good news is the VFS provided generic_file_splice_read() and
iter_file_splice_write() callbacks can be used provided the ->iter_read
and ->iter_write callback support pipes.  However, this is currently
not the case and only iovecs and bvecs (not pipes) are ever attached
to the uio structure.

This commit changes that by allowing full iov_iter structures to be
attached to uios.  Ever since the 4.9 kernel the iov_iter structure
has supported iovecs, kvecs, bvevs, and pipes so it's desirable to
pass the entire thing when possible.  In conjunction with this the
uio helper functions (i.e uiomove(), uiocopy(), etc) have been
updated to understand the new UIO_ITER type.

Note that using the kernel provided uio_iter interfaces allowed the
existing Linux specific uio handling code to be simplified.  When
there's no longer a need to support kernel's older than 4.9, then
it will be possible to remove the iovec and bvec members from the
uio structure and always use a uio_iter.  Until then we need to
maintain all of the existing types for older kernels.

Some additional refactoring and cleanup was included in this change:

- Added checks to configure to detect available iov_iter interfaces.
  Some are available all the way back to the 3.10 kernel and are used
  when available.  In particular, uio_prefaultpages() now always uses
  iov_iter_fault_in_readable() which is available for all supported
  kernels.

- The unused UIO_USERISPACE type has been removed.  It is no longer
  needed now that the uio_seg enum is platform specific.

- Moved zfs_uio.c from the zcommon.ko module to the Linux specific
  platform code for the zfs.ko module.  This gets it out of libzfs
  where it was never needed and keeps this Linux specific code out
  of the common sources.

- Removed unnecessary O_APPEND handling from zfs_iter_write(), this
  is redundant and O_APPEND is already handled in zfs_write();

Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11351
2020-12-18 08:48:26 -08:00
Ryan Libby c7500ded3e
FreeBSD libzfs: gcc requires __thread after static
Building libzfs with gcc on FreeBSD failed because gcc is picky about
the order of keywords in declarations with __thread, whereas clang is
more relaxed.

https://gcc.gnu.org/onlinedocs/gcc/Thread-Local.html

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Closes #11331
2020-12-14 09:28:24 -08:00
Attila Fülöp 0cb40fa389
zpool: Dryrun fails to list some devices
`zpool create -n` fails to list cache and spare vdevs.
`zpool add -n` fails to list spare devices.
`zpool split -n` fails to list `special` and `dedup` labels.
`zpool add -n` and `zpool split -n` shouldn't list hole devices.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #11122
Closes #11167
2020-12-04 14:04:39 -08:00
Antonio Russo d45267183f
libzfsbootenv: do not depend on libnvpair
We do not build libnvpair.pc.  Moreover, it is automatically pulled in
by libzfs.pc, so no additional specific dependency is required.

Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes #11227
2020-11-22 15:16:42 -08:00
Brian Behlendorf f1ece319fd
Include the ABI with dist tarball
The ABI should be included when generating the `make dist` tarball
since it's required by the `make checkabi` target.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11225
2020-11-21 10:44:52 -08:00
Brian Behlendorf 82611cdfe5 Add ABI snapshot
Add a snapshot of the current ABI using libabigail-1.7-2.  The
included ABI passes `make checkabi` for CentOS 7, Fedora 33,
Debian 10, and Ubuntu 20.04.  This covers a fairly wide range
of glibc, gcc, and libabigail versions plus other changes which
are platform specific.

Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11144
2020-11-17 09:21:39 -08:00
Antonio Russo 14c34c3d49 Library ABI tracking with abigail
Provide two make targets: checkabi and storeabi.

storeabi uses libabigail to generate a reference copy of the ABI for the
public libraries.

checkabi compares such a reference to the compiled version, failing if
they are not compatible.  No ABI is generated for libzpool.so, it is
only used by ztest and zdb and not external consumers.

Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes #11144
2020-11-17 09:18:52 -08:00
наб e6c59cd171 zpool: correctly align columns with -p
zpool_expand_proplist() now ignores pl_fixed if its new literal
argument is true.  The rest is a consequence of needing to pass
that down.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiao?=~Dska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11202
2020-11-16 09:26:20 -08:00
Brian Behlendorf b2255edcc0
Distributed Spare (dRAID) Feature
This patch adds a new top-level vdev type called dRAID, which stands
for Distributed parity RAID.  This pool configuration allows all dRAID
vdevs to participate when rebuilding to a distributed hot spare device.
This can substantially reduce the total time required to restore full
parity to pool with a failed device.

A dRAID pool can be created using the new top-level `draid` type.
Like `raidz`, the desired redundancy is specified after the type:
`draid[1,2,3]`.  No additional information is required to create the
pool and reasonable default values will be chosen based on the number
of child vdevs in the dRAID vdev.

    zpool create <pool> draid[1,2,3] <vdevs...>

Unlike raidz, additional optional dRAID configuration values can be
provided as part of the draid type as colon separated values. This
allows administrators to fully specify a layout for either performance
or capacity reasons.  The supported options include:

    zpool create <pool> \
        draid[<parity>][:<data>d][:<children>c][:<spares>s] \
        <vdevs...>

    - draid[parity]       - Parity level (default 1)
    - draid[:<data>d]     - Data devices per group (default 8)
    - draid[:<children>c] - Expected number of child vdevs
    - draid[:<spares>s]   - Distributed hot spares (default 0)

Abbreviated example `zpool status` output for a 68 disk dRAID pool
with two distributed spares using special allocation classes.

```
  pool: tank
 state: ONLINE
config:

    NAME                  STATE     READ WRITE CKSUM
    slag7                 ONLINE       0     0     0
      draid2:8d:68c:2s-0  ONLINE       0     0     0
        L0                ONLINE       0     0     0
        L1                ONLINE       0     0     0
        ...
        U25               ONLINE       0     0     0
        U26               ONLINE       0     0     0
        spare-53          ONLINE       0     0     0
          U27             ONLINE       0     0     0
          draid2-0-0      ONLINE       0     0     0
        U28               ONLINE       0     0     0
        U29               ONLINE       0     0     0
        ...
        U42               ONLINE       0     0     0
        U43               ONLINE       0     0     0
    special
      mirror-1            ONLINE       0     0     0
        L5                ONLINE       0     0     0
        U5                ONLINE       0     0     0
      mirror-2            ONLINE       0     0     0
        L6                ONLINE       0     0     0
        U6                ONLINE       0     0     0
    spares
      draid2-0-0          INUSE     currently in use
      draid2-0-1          AVAIL
```

When adding test coverage for the new dRAID vdev type the following
options were added to the ztest command.  These options are leverages
by zloop.sh to test a wide range of dRAID configurations.

    -K draid|raidz|random - kind of RAID to test
    -D <value>            - dRAID data drives per group
    -S <value>            - dRAID distributed hot spares
    -R <value>            - RAID parity (raidz or dRAID)

The zpool_create, zpool_import, redundancy, replacement and fault
test groups have all been updated provide test coverage for the
dRAID feature.

Co-authored-by: Isaac Huang <he.huang@intel.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Co-authored-by: Don Brady <don.brady@delphix.com>
Co-authored-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mmaybee@cray.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10102
2020-11-13 13:51:51 -08:00
Adrian Chadd 79a357c2a1 Fix pointer-is-uint64_t-sized assumption in the ioctl path
This shows up when compiling freebsd-head on amd64 using gcc-6.4.
The lib32 compat build ends up tripping over this assumption.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: adrian chadd <adrian@freebsd.org>
Closes #11068
Closes #11069
2020-11-10 15:53:13 -08:00
Antonio Russo 71ae6a9d23 Synchronize library ABI levels
Bump library SOVERSION under Linux to match FreeBSD's.

Additionally, this bump properly accounts for the ABI changes relative
to ZoL 0.8.5 for the Linux build.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Issue #11144
2020-11-03 09:24:43 -08:00
Matthew Macy 5fa356ea44
Remove UIO_ZEROCOPY functions structures
The original xuio zero copy functionality has always been unused 
on Linux and FreeBSD.  Remove this disabled code to avoid any
confusion and improve readability.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11124
2020-10-30 10:00:33 -07:00
Ryan Moeller 76d04993a6
Update references to nonexistent man pages in code
Refer to the correct section or alternative for FreeBSD and Linux.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11132
2020-10-30 08:55:59 -07:00
Matthew Macy e53d678d4a
Share zfs_fsync, zfs_read, zfs_write, et al between Linux and FreeBSD
The zfs_fsync, zfs_read, and zfs_write function are almost identical
between Linux and FreeBSD.  With a little refactoring they can be
moved to the common code which is what is done by this commit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11078
2020-10-21 14:08:06 -07:00
Ryan Moeller 485b50bb9e
Cross-platform acltype
The acltype property is currently hidden on FreeBSD and does not
reflect the NFSv4 style ZFS ACLs used on the platform.  This makes it
difficult to observe that a pool imported from FreeBSD on Linux has a
different type of ACL that is being ignored, and vice versa.

Add an nfsv4 acltype and expose the property on FreeBSD.

Make the default acltype nfsv4 on FreeBSD.

Setting acltype to an unhanded style is treated the same as setting
it to off.  The ACLs will not be removed, but they will be ignored.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10520
2020-10-13 21:25:48 -07:00
Warner Losh b302185a92
FreeBSD: make adjustments for the standalone environment
In FreeBSD, there are three compile environments that are supported:
user land, the kernel and the bootloader / standalone. Adjust the
headers to compile in the standalone environment. Limit kernel-only
items from view when _STANDALONE is defined.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Warner Losh <imp@FreeBSD.org>
Closes #10998
2020-10-13 21:05:49 -07:00
Ryan Moeller e191b60ddc
FreeBSD: Improve libzfs_error_init messages
It is a common mistake to have failed to autoload the module due to
permission issues when running a ZFS command as a user.  "Operation
not permitted" is an unhelpfully vague error message.

Use a thread-local message buffer to format a nicer error message.
We can infer that loading the kernel module failed if the module is
not loaded.  This can be extended with heuristics for other errors
in the future.

While looking at this stuff, remove an unused thread-local message
buffer found in libspl and remove some inaccurate verbiage from the
comment on libzfs_load_module.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11033
2020-10-13 09:38:40 -07:00
Brian Behlendorf d0249a4bd0
Replace ZFS on Linux references with OpenZFS
This change updates the documentation to refer to the project
as OpenZFS instead ZFS on Linux.  Web links have been updated
to refer to https://github.com/openzfs/zfs.  The extraneous
zfsonlinux.org web links in the ZED and SPL sources have been
dropped.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11007
2020-10-08 20:10:13 -07:00
Christian Schwarz 36482bf607
libzfs_sendrecv: zfs_send: remove unused pipefd and tid variables
fixup of 196bee4

On gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), the code removed
caused `-Wmaybe-uninitialized` errors.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #11021
2020-10-08 09:43:51 -07:00
Alan Somers a132c2b413
Fix EIO after resuming receive of new dataset over an existing one
When resuming an interrupted ZFS send stream that creates a new dataset
with the same name as an existing dataset, if the existing dataset is
accessed after the failed receive, then after the subsequent successful
receive it will return EIO. This happens because nothing mounts the new
dataset, leaving the old, no longer valid dataset still mounted.

This commit fixes zfs receive to always unmount and remount the
destination, regardless of whether the stream is a new stream or a
resumed stream.

Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
External-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=249579
Closes #10995
Closes #10999
2020-10-02 17:47:09 -07:00
George Wilson bd76bcb36d
zpool command complains about /etc/exports.d
If the /etc/exports.d directory does not exist, then we should only
create it when we're performing an action which already requires root
privileges.

This commit moves the directory creation to the enable/disable code
path which ensures that we have the appropriate privileges.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #10785
Closes #10934
2020-09-25 13:09:40 -07:00
Matthew Macy 7b8363d7f0
FreeBSD: Add support for procfs_list
The procfs_list interface is required by several kstats. Implement
this functionality for FreeBSD to provide access to these kstats.
                           
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10890
2020-09-23 16:43:51 -07:00
Allan Jude 908d43d0a9
libzfs: Don't leak buf if nvlist is too large
Resolves FreeBSD Coverity defect:
CID 1432398:  Resource leaks  (RESOURCE_LEAK)

libzfs: don't leak hdl if there is an error reading env var

Resolves FreeBSD Coverity defect:
CID 1432395:  Resource leaks  (RESOURCE_LEAK)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Closes #10882
2020-09-18 10:23:29 -07:00
George Wilson 8e82ffba7b
pool may become suspended during device expansion
When expanding a device zfs needs to rescan the partition table to
get the correct size. This can only happen when we're in the kernel
and requires the device to be closed. As part of the rescan, udev is
notified and the device links are removed and recreated. This leave a
window where the vdev code may try to reopen the device before udev
has recreated the link. If that happens, then the pool may end up in
a suspended state.

To correct this, we leverage the BLKPG_RESIZE_PARTITION ioctl which
allows the partition information to be modified even while it's in use.
This ioctl also does not remove the device link associated with the zfs
data partition so it eliminates the race condition that can occur in
the kernel.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #10897
2020-09-17 20:03:10 -07:00
Toomas Soome 741b20ce0c
libzfsbootenv: lzbe_nvlist_set needs to store bootenv version VB_NVLIST
A small bug did slip into initial libzfsbootenv; while storing nvlist
in nvlist, we should make sure the bootenv is using VB_NVLIST format.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes #10937
2020-09-17 10:51:09 -07:00
Toomas Soome 1db9e6e4e4
zfs label bootenv should store data as nvlist
nvlist does allow us to support different data types and systems.

To encapsulate user data to/from nvlist, the libzfsbootenv library is
provided.

Reviewed-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes #10774
2020-09-15 15:42:27 -07:00
Matthew Ahrens 9b77c57d5a
libzutil depends on libnvpair
libzutil depends on libnvpair, but this dependency is undeclared in the
build system.  Therefore it isn't possible to make a new command that
depends on libzutil, but does not (directly) depend on libnvpair.

This commit makes this dependency explicit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reivewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10915
2020-09-12 08:19:48 -07:00
Fabio Buso 5266cf4826
Display pbkdf2iters property as plain number
The pbkdf2iters property is an iteration counter
and should be displayed as plain number rather
than in binary unit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabio Buso <buso.fabio@gmail.com>
Closes #10871
2020-09-08 08:49:55 -07:00
alaviss 75bf636cd0
libshare: Add missing headers for nfs.c
On musl libc, zfs failed to compile due to the missing <fcntl.h>
include, which is required for `open()` per POSIX.

This commit add the missing <fcntl.h> include.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hiếu Lê <leorize+oss@disroot.org>
Closes #10880
2020-09-04 12:03:57 -07:00
Ryan Moeller ef55446a9c
Spruce up pkg-config files for libzfs/libzfs_core
Several of the listed library dependencies are not relevant on FreeBSD.
Have ./configure save libraries that are found via pkg-config as
${LIB}_PC and use the configured automake variables instead of hard
coded names so we only get what was actually needed.

While here, update the URL to point at the OpenZFS Github repo.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10869
2020-09-04 11:11:18 -07:00
Alexander Richardson f3064162ba
Fixes for running FreeBSD buildworld on Linux/macOS hosts
Adding an #ifdef __FreeBSD__ to a FreeBSD-specific header may seem odd,
but these headers are used on non-FreeBSD systems during the bootstrap
tools phase.
Originally submitted downstream as https://reviews.freebsd.org/D26193

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10863
2020-09-03 20:06:03 -07:00
Alexander Richardson 417e646722
Fix -Werror,-Wmacro-redefined in limits.h
Those macros are also defined by the compiler-provided float.h which
will be included later on (at least in the FreeBSD buildworld case) and
triggers these -Werror warnings. Including <float.h> first and only
defining the macros when DBL_DIG/FLT_DIG is missing fixes this problem.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10864
2020-09-01 16:22:09 -07:00
Ryan Moeller 7b4e27232d
Add 'zfs rename -u' to rename without remounting
Allow to rename file systems without remounting if it is possible.
It is possible for file systems with 'mountpoint' property set to
'legacy' or 'none' - we don't have to change mount directory for them.
Currently such file systems are unmounted on rename and not even
mounted back.

This introduces layering violation, as we need to update
'f_mntfromname' field in statfs structure related to mountpoint (for
the dataset we are renaming and all its children).

In my opinion it is worth it, as it allow to update FreeBSD in even
cleaner way - in ZFS-only configuration root file system is ZFS file
system with 'mountpoint' property set to 'legacy'. If root dataset is
named system/rootfs, we can snapshot it (system/rootfs@upgrade), clone
it (system/oldrootfs), update FreeBSD and if it doesn't boot we can
boot back from system/oldrootfs and rename it back to system/rootfs
while it is mounted as /. Before it was not possible, because
unmounting / was not possible.

Authored by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Matt Macy <mmacy@freebsd.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10839
2020-09-01 16:14:16 -07:00
Ryan Moeller 46b7d53baf libspl: Provide platform-specific zone implementations
FreeBSD has the concept of jails, a precursor to Solaris's zones, which
can be mapped to the required zones interface with relative ease.  The
previous ZFS implementation in FreeBSD did so, and we should continue
to provide an appropriate implementation in OpenZFS as well.

Move lib/libspl/zone.c into platform code and adopt the correct
implementation for FreeBSD.

While here, prune unused code.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #10851
2020-08-31 19:43:30 -07:00
Alexander Richardson 2b07c5aa3e
Fix definition of BLKGETSIZE64 on FreeBSD
The matching ioctl is DIOCGMEDIASIZE.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10818
2020-08-27 16:09:26 -07:00
Ryan Moeller a2f944a140
zpool: Change base URL for ZFS messages to openzfs-docs
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10820
2020-08-26 21:43:06 -07:00
Allan Jude 7a6c12fd6a
Don't assert on nvlists larger than SPA_MAXBLOCKSIZE
Originally we asserted that all reads are less than SPA_MAXBLOCKSIZE
However, nvlists are not ZFS records, and are not limited to
SPA_MAXBLOCKSIZE.

Add a new environment variable, ZFS_SENDRECV_MAX_NVLIST, to allow the
user to specify the maximum size of the nvlist that can be sent or
received.
Default value: 4 * SPA_MAXBLOCKSIZE (64 MB)

Modify libzfs send routines to return a useful error if the send stream
will generate an nvlist that is beyond the maximum size.

Modify libzfs recv routines to add an explicit error message if the
nvlist is too large, rather than abort()ing.

Move the change the assert() to only trigger on data records

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #9616
2020-08-25 11:04:20 -07:00
Sebastian Gottschall 184df27eef
Avoid symbol collision with in-kernel zstdlib
For Linux, when zfs is compiled as an in kernel static variant
and the in kernel zstd library is compiled statically into the kernel
a symbol collision will occur.  This wrapper header renames all
of the relevant zstd functions to avoid this problem.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Closes #10775
2020-08-24 12:20:41 -07:00
Chris McDonough c3b03d0701
Appease GCC sprintf warnings found on Fedora 32/GCC 10.0.1
Increase the size of DDT_NAMELEN and MNT_LINE_MAX to appease GCC
snprintf truncation warnings.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris McDonough <chrism@plope.com>
Closes #10712
Closes #10766
2020-08-24 10:32:59 -07:00
Ryan Moeller 7b15b8d18c
libzstd: Don't warn about stack frame size in userspace
With the current way CFLAGS are modified in libzstd, CFLAGS passed on
the make command line will cause the CFLAGS in the Makefile for zstd.c
to be discarded, but not AM_CFLAGS.  This causes a smaller frame size
limit to be used, and the build fails.

We don't need to worry about stack frame sizes in userspace.  Drop the
extra flags.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #10773
2020-08-23 11:13:34 -07:00
Ryan Moeller 6fe3498ca3
Import vdev ashift optimization from FreeBSD
Many modern devices use physical allocation units that are much
larger than the minimum logical allocation size accessible by
external commands. Two prevalent examples of this are 512e disk
drives (512b logical sector, 4K physical sector) and flash devices
(512b logical sector, 4K or larger allocation block size, and 128k
or larger erase block size). Operations that modify less than the
physical sector size result in a costly read-modify-write or garbage
collection sequence on these devices.

Simply exporting the true physical sector of the device to ZFS would
yield optimal performance, but has two serious drawbacks:

 1. Existing pools created with devices that have different logical
    and physical block sizes, but were configured to use the logical
    block size (e.g. because the OS version used for pool construction
    reported the logical block size instead of the physical block
    size) will suddenly find that the vdev allocation size has
    increased. This can be easily tolerated for active members of
    the array, but ZFS would prevent replacement of a vdev with
    another identical device because it now appears that the smaller
    allocation size required by the pool is not supported by the new
    device.

 2. The device's physical block size may be too large to be supported
    by ZFS. The optimal allocation size for the vdev may be quite
    large. For example, a RAID controller may export a vdev that
    requires read-modify-write cycles unless accessed using 64k
    aligned/sized requests. ZFS currently has an 8k minimum block
    size limit.

Reporting both the logical and physical allocation sizes for vdevs
solves these problems. A device may be used so long as the logical
block size is compatible with the configuration. By comparing the
logical and physical block sizes, new configurations can be optimized
and administrators can be notified of any existing pools that are
sub-optimal.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Matthew Macy <mmacy@freebsd.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10619
2020-08-21 12:53:17 -07:00
Michael Niewöhner 10b3c7f5e4 Add zstd support to zfs
This PR adds two new compression types, based on ZStandard:

- zstd: A basic ZStandard compression algorithm Available compression.
  Levels for zstd are zstd-1 through zstd-19, where the compression
  increases with every level, but speed decreases.

- zstd-fast: A faster version of the ZStandard compression algorithm
  zstd-fast is basically a "negative" level of zstd. The compression
  decreases with every level, but speed increases.

  Available compression levels for zstd-fast:
   - zstd-fast-1 through zstd-fast-10
   - zstd-fast-20 through zstd-fast-100 (in increments of 10)
   - zstd-fast-500 and zstd-fast-1000

For more information check the man page.

Implementation details:

Rather than treat each level of zstd as a different algorithm (as was
done historically with gzip), the block pointer `enum zio_compress`
value is simply zstd for all levels, including zstd-fast, since they all
use the same decompression function.

The compress= property (a 64bit unsigned integer) uses the lower 7 bits
to store the compression algorithm (matching the number of bits used in
a block pointer, as the 8th bit was borrowed for embedded block
pointers).  The upper bits are used to store the compression level.

It is necessary to be able to determine what compression level was used
when later reading a block back, so the concept used in LZ4, where the
first 32bits of the on-disk value are the size of the compressed data
(since the allocation is rounded up to the nearest ashift), was
extended, and we store the version of ZSTD and the level as well as the
compressed size. This value is returned when decompressing a block, so
that if the block needs to be recompressed (L2ARC, nop-write, etc), that
the same parameters will be used to result in the matching checksum.

All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`,
`zio_prop_t`, etc.) uses the separated _compress and _complevel
variables.  Only the properties ZAP contains the combined/bit-shifted
value. The combined value is split when the compression_changed_cb()
callback is called, and sets both objset members (os_compress and
os_complevel).

The userspace tools all use the combined/bit-shifted value.

Additional notes:

zdb can now also decode the ZSTD compression header (flag -Z) and
inspect the size, version and compression level saved in that header.
For each record, if it is ZSTD compressed, the parameters of the decoded
compression header get printed.

ZSTD is included with all current tests and new tests are added
as-needed.

Per-dataset feature flags now get activated when the property is set.
If a compression algorithm requires a feature flag, zfs activates the
feature when the property is set, rather than waiting for the first
block to be born.  This is currently only used by zstd but can be
extended as needed.

Portions-Sponsored-By: The FreeBSD Foundation
Co-authored-by: Allan Jude <allanjude@freebsd.org>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #6247
Closes #9024
Closes #10277
Closes #10278
2020-08-20 10:30:06 -07:00
Ryan Moeller 4f7fb135bd
libzfs_core: Initialize fail_ioc_cmd to ZFS_IOC_LAST
FreeBSD numbers `ZFS_IOC_*` starting at 0, so pick a different
sentinel value to avoid unintentionally messing with
`ZFS_IOC_POOL_CREATE` ioctls.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #10729
2020-08-18 18:07:43 -07:00
George Melikov 663a070c92
Remove unused `zpool_is_bootable`
Otherwise compiler errors with:

```
libzfs_pool.c:449:1: error: 'zpool_is_bootable'
 defined but not used [-Werror=unused-function]
```

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #10734
2020-08-18 09:30:12 -07:00
Richard Laager eaa25f1a8e
Remove GRUB restrictions
The GRUB restrictions are based around the pool's bootfs property.
Given the current situation where GRUB is not staying current with
OpenZFS pool features, having either a non-ZFS /boot or a separate
pool with limited features are pretty much the only long-term answers
for GRUB support.  Only the second case matters in this context.  For
the restrictions to be useful, the bootfs property would have to be set
on the boot pool, because that is where we need the restrictions, as
that is the pool that GRUB reads from. The documentation for bootfs
describes it as pointing to the root pool. That's also how it's used in
the initramfs. ZFS does not allow setting bootfs to point to a dataset
in another pool. (If it did, it'd be difficult-to-impossible to enforce
these restrictions cross-pool). Accordingly, bootfs is pretty much
useless for GRUB scenarios moving forward.

Even for users who have only one pool, the existing restrictions for
GRUB are incomplete. They don't prevent you from enabling the
unsupported checksums, for example. For that reason, I have ripped out
all the GRUB restrictions.

A little longer-term, I think extending the proposed features=portable
system to define a features=grub is a much more useful approach. The
user could set that on the boot pool at creation, and things would
Just Work.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #8627
2020-08-17 23:12:39 -07:00
Matthew Macy 6f763d4085
FreeBSD: Fix module autoloading when built in base
The KMOD name is "zfs" instead of "openzfs" when building in FreeBSD.

Define a ZFS_KMOD symbol as "zfs" when IN_BASE is defined, otherwise
"openzfs".

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10699
2020-08-11 13:49:50 -07:00
Matthew Ahrens c6f2b942be Remove KMC_NOMAGAZINE
Remove dead code to make the implementation easier to understand.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Ahrens <matt@delphix.com>
Closes #10650
2020-08-05 10:28:07 -07:00
Matthew Ahrens d519c10575 Remove KMC_NOHASH
Remove dead code to make the implementation easier to understand.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Ahrens <matt@delphix.com>
Closes #10650
2020-08-05 10:27:56 -07:00
Ryan Moeller b6737193ee
FreeBSD: Fix `zfs jail` and add a test
zfs_jail was not using zfs_ioctl so failed to map the IOC number
correctly.  Use zfs_ioctl to perform the jail ioctl and add a test 
case for FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10658
2020-08-01 08:44:54 -07:00
Allan Jude 8fb79fdddb
Change the error handling for invalid property values
ZFS recv should return a useful error message when an invalid index
property value is provided in the send stream properties nvlist

With a compression= property outside of the understood range:

Before:
```
receiving full stream of zof/zstd_send@send2 into testpool/recv@send2
internal error: Invalid argument
Aborted (core dumped)
```
Note: the recv completes successfully, the abort() is likely just to
make it easier to track the unexpected error code.

After:
```
receiving full stream of zof/zstd_send@send2 into testpool/recv@send2
cannot receive compression property on testpool/recv: invalid property
value received 28.9M stream in 1 seconds (28.9M/sec)
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #10631
2020-08-01 08:41:31 -07:00
Matthew Macy 47ed79ff60
Changes to make openzfs build within FreeBSD buildworld
A collection of header changes to enable FreeBSD to build
with vendored OpenZFS.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10635
2020-07-31 21:30:31 -07:00
Allan Jude 24f98ed383
When encountering EZFS_UNKNOWN, print the error text buffer anyway
Rather than just saying there was an internal error, provide any
context we might have to the user to help them understand the issue.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #10632
2020-07-31 09:07:37 -07:00
Matthew Macy 27d96d2254
Rename refcount.h to zfs_refcount.h
Renamed to avoid conflicting with refcount.h when a different
implementation is already provided by the platform.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10620
2020-07-29 16:35:33 -07:00
Matthew Macy 5678d3f593
Prefix zfs internal endian checks with _ZFS
FreeBSD defines _BIG_ENDIAN BIG_ENDIAN _LITTLE_ENDIAN
LITTLE_ENDIAN on every architecture. Trying to do
cross builds whilst hiding this from ZFS has proven
extremely cumbersome.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10621
2020-07-28 13:02:49 -07:00
Matthew Macy f5b189f937
FreeBSD: Fixes required to build ZFS on PowerPC
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10622
2020-07-25 11:00:23 -07:00
Kyle Evans bfafe1780a
Annotate unused parameters on inline definitions as such
* libspl: umem: These are obviously and intentionally unused; annotate 
  them as such to appease -Wunused-parameter builds that include this 
  header.

* sys/dmu.h: In this case, clear_on_evict_dbufp is only used for 
  ZFS_DEBUG builds, so annotate it as __maybe_unused to appease 
  -Wunused-parameter.


Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes #10606
2020-07-23 17:41:48 -07:00
Kyle Evans b197457cd6
libzfs: const'ify path argument to zfs_path_to_zhandle
zfs_path_to_zhandle has no need to mutate the path argument,
most notably:

- zfs_open takes path as const
- getextmntent takes path as const
- fprintf most clearly doesn't need to mutate it

It's hard to foresee any reason that libzfs could conceivably
want to mutate it in the future, either, so const'ify it.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes #10605
2020-07-22 11:14:20 -07:00
Matthew Macy 23c871671c
FreeBSD: zfs commands backward compatibility
Update the zfs commands such that they're backwards compatible with
the version of ZFS is the base FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10542
2020-07-15 21:32:50 -07:00
Joao Carlos Mendes Luis 5f72109e5b
Disable -Wl,-z,defs for ASAN builds
Commit af65916 added -Wl,-z,defs for the shared libraries. This
apparently does not work in some cases with --enable-asan, so only add
it for non-ASAN builds.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: João Carlos Mendes Luis <jonny@jonny.eng.br>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10557
Closes #10560
2020-07-14 12:17:44 -07:00
Brian Atkinson e4d3d77684
Fixing gang ABD child removal race condition
On linux the list debug code has been setting off a failure when
checking that the node->next->prev value is pointing back at the node.
At times this check evaluates to 0xdead. When removing a child from a
gang ABD we must acquire the child's abd_mtx to make sure that the
same ABD is not being added to another gang ABD while it is being
removed from a gang ABD. This fixes a race condition when checking
if an ABDs link is already active and part of another gang ABD before
adding it to a gang.

Added additional debug code for the gang ABD in abd_verify() to make
sure each child ABD has active links. Also check to make sure another
gang ABD is not added to a gang ABD.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10511
2020-07-14 11:04:35 -07:00
George Wilson c15d36c674
Remove dependency on sharetab file and refactor sharing logic
== Motivation and Context

The current implementation of 'sharenfs' and 'sharesmb' relies on
the use of the sharetab file. The use of this file is os-specific
and not required by linux or freebsd. Currently the code must
maintain updates to this file which adds complexity and presents
a significant performance impact when sharing many datasets. In
addition, concurrently running 'zfs sharenfs' command results in
missing entries in the sharetab file leading to unexpected failures.

== Description

This change removes the sharetab logic from the linux and freebsd
implementation of 'sharenfs' and 'sharesmb'. It still preserves an
os-specific library which contains the logic required for sharing
NFS or SMB. The following entry points exist in the vastly simplified
libshare library:

- sa_enable_share -- shares a dataset but may not commit the change
- sa_disable_share -- unshares a dataset but may not commit the change
- sa_is_shared -- determine if a dataset is shared
- sa_commit_share -- notify NFS/SMB subsystem to commit the shares
- sa_validate_shareopts -- determine if sharing options are valid

The sa_commit_share entry point is provided as a performance enhancement
and is not required. The sa_enable_share/sa_disable_share may commit
the share as part of the implementation. Libshare provides a framework
for both NFS and SMB but some operating systems may not fully support
these protocols or all features of the protocol.

NFS Operation:
For linux, libshare updates /etc/exports.d/zfs.exports to add
and remove shares and then commits the changes by invoking
'exportfs -r'. This file, is automatically read by the kernel NFS
implementation which makes for better integration with the NFS systemd
service. For FreeBSD, libshare updates /etc/zfs/exports to add and
remove shares and then commits the changes by sending a SIGHUP to
mountd.

SMB Operation:
For linux, libshare adds and removes files in /var/lib/samba/usershares
by calling the 'net' command directly. There is no need to commit the
changes. FreeBSD does not support SMB.

== Performance Results

To test sharing performance we created a pool with an increasing number
of datasets and invoked various zfs actions that would enable and
disable sharing. The performance testing was limited to NFS sharing.
The following tests were performed on an 8 vCPU system with 128GB and
a pool comprised of 4 50GB SSDs:

Scale testing:
- Share all filesystems in parallel -- zfs sharenfs=on <dataset> &
- Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> &

Functional testing:
- share each filesystem serially -- zfs share -a
- unshare each filesystem serially -- zfs unshare -a
- reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool>

For 'zfs sharenfs=on' scale testing we saw an average reduction in time
of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time
of 83.36%.

Functional testing also shows a huge improvement:
- zfs share -- 97.97% reduction in time
- zfs unshare -- 96.47% reduction in time
- zfs inhert -r sharenfs -- 99.01% reduction in time

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Bryant G. Ly <bryangly@gmail.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
External-Issue: DLPX-68690
Closes #1603
Closes #7692
Closes #7943
Closes #10300
2020-07-13 09:19:18 -07:00
Matthew Ahrens e59a377a8f
filesystem_limit/snapshot_limit is incorrectly enforced against root
The filesystem_limit and snapshot_limit properties limit the number of
filesystems or snapshots that can be created below this dataset.
According to the manpage, "The limit is not enforced if the user is
allowed to change the limit."  Two types of users are allowed to change
the limit:

1. Those that have been delegated the `filesystem_limit` or
`snapshot_limit` permission, e.g. with
`zfs allow USER filesystem_limit DATASET`.  This works properly.

2. A user with elevated system privileges (e.g. root).  This does not
work - the root user will incorrectly get an error when trying to create
a snapshot/filesystem, if it exceeds the `_limit` property.

The problem is that `priv_policy_ns()` does not work if the `cred_t` is
not that of the current process.  This happens when
`dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a
sync task's check func) to determine the permissions of the
corresponding user process.

This commit fixes the issue by passing the `task_struct` (typedef'ed as
a `proc_t`) to syncing context, and then using `has_capability()` to
determine if that process is privileged.  Note that we still need to
pass the `cred_t` to syncing context so that we can check if the user
was delegated this permission with `zfs allow`.

This problem only impacts Linux.  Wrappers are added to FreeBSD but it
continues to use `priv_check_cred()`, which works on arbitrary `cred_t`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #8226
Closes #10545
2020-07-11 17:18:02 -07:00
Ryan Moeller 217f48373f
libzfs: Add error message for why creating mountpoint failed
When zfs_mount_at() fails to stat the mountpoint and can't create the
directory, we return an error with a message "failed to create
mountpoint" but there is no indication why it failed.

Add the error string from the syscall to the error aux message.

Update do_mount for Linux to return the errno instead of -1.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10550
2020-07-11 17:16:13 -07:00
Serapheim Dimitropoulos 6f1db5f37e
Unconditionally enable debugging for libzpool
We already enable -DDEBUG unconditionally (meaning regardless
of this is a debug build or a performance build) for zdb and
ztest as they are mostly used for development and debugging.

This patch enables -DDEBUG for libzpool extending the debugging
checks for zdb, ztest, and a couple of other test utilities.

In addition to passing -DDEBUG we also enable -DZFS_DEBUG so
all assertion checks work s expected. We do so not only in
libzpool but in every utility that links to it, even if the
utility doesn't directly use any functionality wrapped in
ZFS_DEBUG macro definitions. The reason is that these utilities
may still include headers that contain structs that have more
fields when ZFS_DEBUG is defined. This can be a problem as
enabling that flag for libzpool but not for zdb can lead into
random problems (e.g. segmentation faults) as zdb may be have
an incorrect view of a struct passed to it by libzpool.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #10549
2020-07-10 15:30:31 -07:00
Arvind Sankar 3e597dee11 Use abs_top_builddir when referencing libraries
libtool stores absolute paths in the dependency_libs component of the
.la files. If the Makefile for a dependent library refers to the
libraries by relative path, some libraries end up duplicated on the link
command line.

As an example, libzfs specifies libzfs_core, libnvpair and libuutil as
dependencies to be linked in. The .la file for libzfs_core also
specifies libnvpair, but using an absolute path, with the result that
libnvpair is present twice in the linker command line for producing
libzfs.

While the only thing this causes is to slightly slow down the linking,
we can avoid it by using absolute paths everywhere, including for
convenience libraries just for consistency.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:32 -07:00
Arvind Sankar af65916226 Add -z defs to LDFLAGS
This will make sure the installed libraries are linked with everything
they require.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:22 -07:00
Arvind Sankar 1537105a8c Add config.rpath for AM_GNU_GETTEXT
Commit e8864b1b28 ("config: libintl/libiconv for gettext() detection")
added an empty config.rpath with a comment that the real one doesn't
work with libtool.

However, an empty config.rpath doesn't really work: eg. on FreeBSD,
where libintl is in /usr/local/lib, configure thinks that gettext
doesn't exist and NLS should be disabled, which currently isn't
supported in the source, and hence requires manual workaround to
directly link -lintl without relying on configure. config.rpath is
essential to let it be detected either in --prefix or using
--with-libintl-prefix.

I also don't see the mentioned issue with libtool flags applied to
compilation, it seems to work fine to pass LTLIBINTL to libtool. It's
unnecessary to include LTLIBICONV as the configure test will
automatically append that to LTLIBINTL if it is necessary to link with
libiconv.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:12 -07:00
Arvind Sankar 4d61ade1a3 Clean up lib dependencies
libzutil is currently statically linked into libzfs, libzfs_core and
libzpool. Avoid the unnecessary duplication by removing it from libzfs
and libzpool, and adding libzfs_core to libzpool.

Remove a few unnecessary dependencies:
- libuutil from libzfs_core
- libtirpc from libspl
- keep only libcrypto in libzfs, as we don't use any functions from
  libssl
- librt is only used for clock_gettime, however on modern systems that's
  in libc rather than librt. Add a configure check to see if we actually
  need librt
- libdl from raidz_test

Add a few missing dependencies:
- zlib to libefi and libzfs
- libuuid to zpool, and libuuid and libudev to zed
- libnvpair uses assertions, so add assert.c to provide aok and
  libspl_assertf

Sort the LDADD for programs so that libraries that satisfy dependencies
come at the end rather than the beginning of the linker command line.

Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY
instead. This can take advantage of pkg-config, and it also avoids
polluting LIBS.

List all the required dependencies in the pkgconfig files, and move the
one for libzfs_core into the latter's directory. Install pkgconfig files
in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on
FreeBSD, instead of /usr/share/pkgconfig, as the more correct location
for library .pc files.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:26:00 -07:00
Arvind Sankar b6437ea41c Move libspl_assertf into .c file
Variadic functions cannot be inlined. libspl_assertf ends up being
duplicated in every file that uses it.

Fix this by moving the function into a new assert.c. Also move the
definition of aok into the new file instead of zone.c.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10538
2020-07-10 14:25:24 -07:00
Ryan Moeller 659f4008be
libzfs: Make zfs_cmd_t initialization consistent, use zfs_ioctl
The clang version 8.0.1 shipped in FreeBSD 12.1-RELEASE also oddly
throws a warning that is treated as an error on the initialization of
the zc struct in zpool_nextboot.

The zpool_nextboot code from FreeBSD was not updated to use zfs_ioctl.

Switch ioctl to zfs_ioctl in and use {"\0"} to initialize the struct.
Do a consistency pass for zfs_cmd_t initialization.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10539
2020-07-09 17:47:12 -07:00
Ryan Moeller fb91f0367e
Add zpool_nextboot, move zfs_jail to libzfs.h
FreeBSD has a zfsbootcfg command that wants zpool_nextboot in libzfs.

Add the function to FreeBSD's libzfs_compat.c, and while here move
the prototype for zfs_jail out of param.h in FreeBSD's SPL and into
libzfs.h under an ifdef for FreeBSD, where the prototype for
zpool_nextboot joins it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10524
2020-07-06 11:57:24 -07:00
winglq a4b0a74c7f
Fix atomic_clear_long_excl wrong return
When clearing a bit, we should check whether that bit is 0.
Note atomic_clear_long_excl is not used.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Liu Qing <winglq@gmail.com>
Closes #10526
2020-07-06 11:46:17 -07:00
Brian Behlendorf 9a49d3f3d3
Add device rebuild feature
The device_rebuild feature enables sequential reconstruction when
resilvering.  Mirror vdevs can be rebuilt in LBA order which may
more quickly restore redundancy depending on the pools average block
size, overall fragmentation and the performance characteristics
of the devices.  However, block checksums cannot be verified
as part of the rebuild thus a scrub is automatically started after
the sequential resilver completes.

The new '-s' option has been added to the `zpool attach` and
`zpool replace` command to request sequential reconstruction
instead of healing reconstruction when resilvering.

    zpool attach -s <pool> <existing vdev> <new vdev>
    zpool replace -s <pool> <old vdev> <new vdev>

The `zpool status` output has been updated to report the progress
of sequential resilvering in the same way as healing resilvering.
The one notable difference is that multiple sequential resilvers
may be in progress as long as they're operating on different
top-level vdevs.

The `zpool wait -t resilver` command was extended to wait on
sequential resilvers.  From this perspective they are no different
than healing resilvers.

Sequential resilvers cannot be supported for RAIDZ, but are
compatible with the dRAID feature being developed.

As part of this change the resilver_restart_* tests were moved
in to the functional/replacement directory.  Additionally, the
replacement tests were renamed and extended to verify both
resilvering and rebuilding.

Original-patch-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: John Poduska <jpoduska@datto.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10349
2020-07-03 11:05:50 -07:00
Matthew Ahrens 3c42c9ed84
Clean up OS-specific ARC and kmem code
OS-specific code (e.g. under `module/os/linux`) does not need to share
its code structure with any other operating systems.  In particular, the
ARC and kmem code need not be similar to the code in illumos, because we
won't be syncing this OS-specific code between operating systems.  For
example, if/when illumos support is added to the common repo, we would
add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of
this code.

Therefore, we can simplify the code in the OS-specific ARC and kmem
routines.

These changes do not impact system behavior, they are purely code
cleanup.  The changes are:

Arenas are not used on Linux or FreeBSD (they are always `NULL`), so
`heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along
with code that uses them.

In `arc_available_memory()`:
 * `desfree` is unused, remove it
 * rename `freemem` to avoid conflict with pre-existing `#define`
 * remove checks related to arenas
 * use units of bytes, rather than converting from bytes to pages and
   then back to bytes

`SPL_KMEM_CACHE_REAP` is unused, remove it.

`skc_reap` is unused, remove it.

The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove
it.

`vmem_size()` and associated type and macros are unused, remove them.

In `arc_memory_throttle()`, use a less confusing variable name to store
the result of `arc_free_memory()`.

Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10499
2020-06-29 09:01:07 -07:00
Arvind Sankar 6b99fc0620 Fixes for make dist
Reduce the usage of EXTRA_DIST. If files are conditionally included in
_SOURCES, _HEADERS etc, automake is smart enough to dist all files that
could possibly be included, but this does not apply to EXTRA_DIST,
resulting in make dist depending on the configuration.

Add some files that were missing altogether in various Makefile's.

The changes to disted files in this commit (excluding deleted files):

+./cmd/zed/agents/README.md
+./etc/init.d/README.md
+./lib/libspl/os/freebsd/getexecname.c
+./lib/libspl/os/freebsd/gethostid.c
+./lib/libspl/os/freebsd/getmntany.c
+./lib/libspl/os/freebsd/mnttab.c
-./lib/libzfs/libzfs_core.pc
-./lib/libzfs/libzfs.pc
+./lib/libzfs/os/freebsd/libzfs_compat.c
+./lib/libzfs/os/freebsd/libzfs_fsshare.c
+./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c
+./lib/libzfs/os/freebsd/libzfs_zmount.c
+./lib/libzutil/os/freebsd/zutil_compat.c
+./lib/libzutil/os/freebsd/zutil_device_path_os.c
+./lib/libzutil/os/freebsd/zutil_import_os.c
+./module/lua/README.zfs
+./module/os/linux/spl/README.md
+./tests/README.md
+./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh
+./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh
+./tests/zfs-tests/tests/functional/inheritance/README.config
+./tests/zfs-tests/tests/functional/inheritance/README.state
+./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh
+./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10501
2020-06-26 14:20:02 -07:00
Arvind Sankar 7513807320 Drop unnecessary srcdir paths
There's no need to specify the srcdir explicitly in _HEADERS and
EXTRA_DIST.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:20:18 -07:00
Arvind Sankar 2989d1012a Fix libspl/asm-generic/atomic for VPATH build
Currently, asm-generic/atomic.c is compiled into a .S file, with a
comment saying this is to simplify the upper-level Makefile.

However, this doesn't work properly with a VPATH build, which would
require better logic to deal with generated sources correctly.

It also doesn't seem more complex to just specify the .c/.S source file,
depending on the cpu, instead of only the source directory in
lib/libspl/Makefile.am, which eliminates the need to do the intermediate
compilation.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:19:36 -07:00
Prawn 2451a55368
zfs -V: Print userland version even if kernel module not loaded
Running zfs -V when the modules are not loaded would currently 
result in the following output:

    zfs_version_kernel() failed: No such file or directory

Note the lack of userland version output.  Reorder the code to
ensure the userland version is printed even when the kmods
are not loaded.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes #10483
2020-06-22 09:56:29 -07:00
Arvind Sankar 0ce2de637b Add prototypes
Add prototypes/move prototypes to header files.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:32 -07:00
Arvind Sankar 60356b1a21 Add include files for prototypes
Include the header with prototypes in the file that provides definitions
as well, to catch any mismatch between prototype and definition.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:25 -07:00
Arvind Sankar c3fe42aabd Remove dead code
Delete unused functions.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:18 -07:00
Arvind Sankar 65c7cc49bf Mark functions as static
Mark functions used only in the same translation unit as static. This
only includes functions that do not have a prototype in a header file
either.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:20:38 -07:00
Arvind Sankar 1fa5c7af33 Cleanup libzpool/kernel.c
Commit
  ec21397127 ("async zvol minor node creation interferes with receive")
replaced zvol_create_minors with zvol_create_minor and
zvol_create_minors_recursive, changing the prototype at the same time.

However the stub functions in libzpool/kernel.c were defined with the
old prototype. As the definitions are empty, this doesn't cause any
runtime issues, but an LTO build shows warnings because of the
mismatched prototypes.

Commit
  a0bd735adb ("Add support for asynchronous zvol minor operations")
removed the real zvol_remove_minor, but for some reason added a stub
implementation in libzpool/kernel.c with no references. Delete this dead
code.

Commit
  196bee4cfd ("Remove deduplicated send/receive code")
removed zfs_onexit_del_cb and zfs_onexit_cb_data. Drop the stubs as
well.

Add zvol.h include to provide prototypes, and sort the include
directives.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:18:49 -07:00
Matthew Macy 8056a75672
Disambiguate condvar API contract
On Illumos callers of cv_timedwait and cv_timedwait_hires
can't distinguish between whether or not the cv was signaled
or the call timed out. Illumos handles this (for some definition
of handles) by calling cv_signal in the return path if we were
signaled but the return value indicates instead that we timed
out. This would make sense if it were possible to query the the
cv for its net signal disposition. However, this isn't possible
and, in spite of the fact that there are places in the code that
clearly take a different and incompatible path if a timeout value
is indicated, this distinction appears to be rather subtle to most
developers. This problem is further compounded by the fact that on
Linux, calling cv_signal in the return path wouldn't even do the
right thing unless there are other waiters.

Since it is possible for the caller to independently determine how
much time is remaining but it is not possible to query if the cv
was in fact signaled, prioritizing signalling over timeout seems
like a cleaner solution. In addition, judging from usage patterns
within the code itself, it is also less error prone.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10471
2020-06-18 10:17:50 -07:00
Matthew Ahrens ba54b180a5
Remove refences to blacklist/whitelist
These terms reinforce the incorrect notion that black is bad and white
is good.

Replace this language with more specific terms which are also more clear
and don't rely on metaphor.  Specifically:

* When vdevs are specified on the command line, they are the "selected"
vdevs.

* Entries in /dev/ which should not be considered as possible disks are
"excluded" devices.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10457
2020-06-16 11:41:45 -07:00
Jorgen Lundman 883a40fff4
Add convenience wrappers for common uio usage
The macOS uio struct is opaque and the API must be used, this
makes the smallest changes to the code for all platforms.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10412
2020-06-14 10:09:55 -07:00
Matthew Ahrens f66434268c
Remove unnecessary references to slavery
The horrible effects of human slavery continue to impact society.  The
casual use of the term "slave" in computer software is an unnecessary
reference to a painful human experience.

This commit removes all possible references to the term "slave".

Implementation notes:

The zpool.d/slaves script is renamed to dm-deps, which uses the same
terminology as `dmsetup deps`.

References to the `/sys/class/block/$dev/slaves` directory remain.  This
directory name is determined by the Linux kernel.  Although
`dmsetup deps` provides the same information, it unfortunately requires
elevated privileges, whereas the `/sys/...` directory is world-readable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10435
2020-06-10 17:07:59 -07:00
Arvind Sankar 66786f7943 Fix VPATH builds for user config
cmd/zpool and lib/libzutil Makefile's use -I., which won't work with a
VPATH build. Replace it with -I$(srcdir) instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10379
Closes #10421
2020-06-10 09:25:37 -07:00
Andrea Gelmini dd4bc569b9
Fix typos
Correct various typos in the comments and tests.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #10423
2020-06-09 21:24:09 -07:00
Matthew Ahrens 7bcb7f0840
File incorrectly zeroed when receiving incremental stream that toggles -L
Background:

By increasing the recordsize property above the default of 128KB, a
filesystem may have "large" blocks.  By default, a send stream of such a
filesystem does not contain large WRITE records, instead it decreases
objects' block sizes to 128KB and splits the large blocks into 128KB
blocks, allowing the large-block filesystem to be received by a system
that does not support the `large_blocks` feature.  A send stream
generated by `zfs send -L` (or `--large-block`) preserves the large
block size on the receiving system, by using large WRITE records.

When receiving an incremental send stream for a filesystem with large
blocks, if the send stream's -L flag was toggled, a bug is encountered
in which the file's contents are incorrectly zeroed out.  The contents
of any blocks that were not modified by this send stream will be lost.
"Toggled" means that the previous send used `-L`, but this incremental
does not use `-L` (-L to no-L); or that the previous send did not use
`-L`, but this incremental does use `-L` (no-L to -L).

Changes:

This commit addresses the problem with several changes to the semantics
of zfs send/receive:

1. "-L to no-L" incrementals are rejected.  If the previous send used
`-L`, but this incremental does not use `-L`, the `zfs receive` will
fail with this error message:

    incremental send stream requires -L (--large-block), to match
    previous receive.

2. "no-L to -L" incrementals are handled correctly, preserving the
smaller (128KB) block size of any already-received files that used large
blocks on the sending system but were split by `zfs send` without the
`-L` flag.

3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`.
This feature indicates that we can correctly handle "no-L to -L"
incrementals.  This flag is currently not set on any send streams.  In
the future, we intend for incremental send streams of snapshots that
have large blocks to use `-L` by default, and these streams will also
have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams
from the default use of `zfs send` won't encounter the bug mentioned
above, because they can't be received by software with the bug.

Implementation notes:

To facilitate accessing the ZPL's generation number,
`zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and
restructured to fill in a struct with ZPL-specific info including owner
and generation.

In the "no-L to -L" case, if this is a compressed send stream (from
`zfs send -cL`), large WRITE records that are being written to small
(128KB) blocksize files need to be decompressed so that they can be
written split up into multiple blocks.  The zio pipeline will recompress
each smaller block individually.

A new test case, `send-L_toggle`, is added, which tests the "no-L to -L"
case and verifies that we get an error for the "-L to no-L" case.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #6224 
Closes #10383
2020-06-09 10:41:01 -07:00
Paul Dagnelie b2f3709c3e
Don't erase final byte of envblock
When we copy the envblock's contents out, we currently treat it as 
a normal C string. However, this functionality is supposed to more
closely emulate interacting with a file. As a consequence, we were 
incorrectly truncating the contents of the envblock by replacing 
the final byte of the buffer with a null character.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10405
2020-06-08 08:58:13 -07:00
Ryan Moeller 60265072e0
Improve compatibility with C++ consumers
C++ is a little picky about not using keywords for names, or string
constness.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10409
2020-06-06 12:54:04 -07:00
наб a1ba120927 Always use "%lld" for formatting time_ts
Given the following test program:
  #include <time.h>
  #include <stdio.h>
  #include <stdint.h>
  int main() {
    printf("time_t:    %d\n", sizeof(time_t));
    printf("long:      %d\n", sizeof(long));
    printf("long long: %d\n", sizeof(long long));
  }

These are output on various x86 architectures:
  x32$   time_t:    8
  x32$   long:      4
  x32$   long long: 8

  amd64$ time_t:    8
  amd64$ long:      8
  amd64$ long long: 8

  i386$  time_t:    4
  i386$  long:      4
  i386$  long long: 8

Therefore code using "%l[du]" to format time_ts produced warnings on x32

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@gmail.com>
Closes #10357
Closes #844
2020-05-28 10:29:58 -07:00
наб 6059f3a1f6 Correctly handle the x32 ABI
__x86_64__ && _ILP32 => don't forcibly define _LP64

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@gmail.com>
Closes #10357
Closes #844
2020-05-28 10:28:20 -07:00
John Gallagher 50ff632787
Rework error handling in zpool_trim()
When a manual trim is run against an entire pool, errors about
particular devices which don't support trim are suppressed. This changes
zpool_trim() in libzfs so that it doesn't return an error when the only
errors are suppressed ones. An exception is made when none of the
devices support trim, in which case an error is reported and a non-zero
status is returned.

This also fixes how the --wait flag works in the presence of suppressed
errors. In particular, suppressed errors no longer cause zpool_trim()
to skip the wait.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #10263 
Closes #10372
2020-05-27 17:27:28 -07:00