Commit Graph

13 Commits

Author SHA1 Message Date
Brian Behlendorf 3f03fc8df3 Add zpool events tests
* events_001_pos - Verify the expected events are generated when
  invoking the various zpool sub-commands.  These events must
  appear in `zpool event` and be consumed by the ZED.

* events_002_pos - Verify the ZED consumes events which were
  generated while it wasn't running when it is started.
  Additionally, verify that events are only processed once.

As part of this change the default.cfg used by the test suite
was changed to a default.cfg.in file.  This was needed so the
install location of all zed scripts, not only the enabled ones,
could be reliably determined.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6128
2017-05-22 12:34:42 -04:00
Brian Behlendorf 8c54ddd33a Enable additional test cases
Enable additional test cases, in most cases this required a few
minor modifications to the test scripts.  In a few cases a real
bug was uncovered and fixed.  And in a handful of cases where pools
are layered on pools the test case will be skipped until this is
supported.  Details below for each test case.

* zpool_add_004_pos - Skip test on Linux until adding zvols to pools
  is fully supported and deadlock free.

* zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't
  relevant for Linux.  The find_vfstab_dev, find_mnttab_dev, and
  save_dump_dev functions were updated accordingly for Linux.  Add
  O_EXCL to the in-use check to prevent the -f (force) option from
  working for mounted filesystems and improve the resulting error.

* zpool_add_006_pos - Update test case such that it doesn't depend
  on nested pools.  Switch to truncate from mkfile to reduce space
  requirements and speed up the test case.

* zpool_clear_001_pos - Speed up test case by filling filesystem to
  25% capacity.

* zpool_create_002_pos, zpool_create_004_pos - Use sparse files for
  file vdevs in order to avoid increasing the partition size.

* zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with
  similar redundancy.  Updating the valid_args and forced_args cases.

* zpool_create_008_pos - Disable overlapping partition portion.

* zpool_create_011_neg - Fix to correctly create the extra partition.
  Modified zpool_vdev.c to use fstat64_blk() wrapper which includes
  the st_size even for block devices.

* zpool_create_012_neg - Updated to properly find swap devices.

* zpool_create_014_neg, zpool_create_015_neg - Updated to use
  swap_setup() and swap_cleanup() wrappers which do the right thing
  on Linux and Illumos.  Removed '-n' option which succeeds under
  Linux due to differences in the in-use checks.

* zpool_create_016_pos.ksh - Skipped test case isn't useful.

* zpool_create_020_pos - Added missing / to cleanup() function.
  Remove cache file prior to test to ensure a clean environment
  and avoid false positives.

* zpool_destroy_001_pos - Removed test case which creates a pool on
  a zvol.  This is more likely to deadlock under Linux and has never
  been completely supported on any platform.

* zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux.
  Mount point must not be busy in order to unmount them.

* zfs_destroy_001_pos - Handle EBUSY error which can occur with
  volumes when racing with udev.

* zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux
  until adding zvols to pools is fully supported and deadlock free.
  The test could be modified to use loop-back devices but it would
  be preferable to use the test case as is for improved coverage.

* zpool_export_004_pos - Updated test case to such that it doesn't
  depend on nested pools.  Normal file vdev under /var/tmp are fine.

* zpool_import_all_001_pos - Updated to skip partition 1, which is
  known as slice 2, on Illumos.  This prevents overwriting the
  default TESTPOOL which was causing the failure.

* zpool_import_002_pos, zpool_import_012_pos - No changes needed.

* zpool_remove_003_pos - No changes needed

* zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed
  by upstream OpenZFS commit 3b7f360.

* zpool_upgrade_007_pos - Disabled in test case due to known failure.
  Opened issue https://github.com/zfsonlinux/zfs/issues/6112

* zvol_misc_002_pos - Updated to to use ext2.

* zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos,
  zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, these
  test case could be updated to use Linux's crash dump facility.

* zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers.
  File creation switched from /tmp to /var/tmp.  Enabled minimal
  useful tests for Linux, skip test cases which aren't applicable.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3484
Issue #5634
Issue #2437
Issue #5202
Issue #4034
Closes #6095
2017-05-11 14:27:57 -07:00
Brian Behlendorf 00481e7dad OpenZFS 7503 - zfs-test should tail ::zfs_dbgmsg on test failure
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Enable internal log for DEBUG builds and in zfs-tests.sh.
- callbacks/zfs_dbgmsg.ksh - Dump interal log via kstat.
- callbacks/zfs_dmesg.ksh - Dump dmesg log.
- default.cfg - 'Test Suite Specific Commands' dropped.

OpenZFS-issue: https://www.illumos.org/issues/7503
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a1300
Closes #6002
2017-04-12 13:36:48 -07:00
Giuseppe Di Natale 7469863167 Correct shellcheck make recipe
Consolidated the shellcheck call in the
make recipe down to a single call of
shellcheck. Corrected script errors that
have been skipped. Corrected script errors
that have been introduced because make
wasn't reporting any errors from shellcheck.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5976
2017-04-06 17:16:41 -07:00
John Wren Kennedy c1d9abf905 OpenZFS 7290 - ZFS test suite needs to control what utilities it can run
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

Porting Notes:
- Utilities which aren't available under Linux have been removed.
- Because of sudo's default secure path behavior PATH must be
  explicitly reset at the top of libtest.shlib.  This avoids the
  need for all users to customize secure path on their system.
- Updated ZoL infrastructure to manage constrained path
- Updated all test cases
- Check permissions for usergroup tests
- When testing in-tree create links under bin/
- Update fault cleanup such that missing files during
  cleanup aren't fatal.
- Configure su environment with constrained path

OpenZFS-issue: https://www.illumos.org/issues/7290
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1d32ba6
Closes #5903
2017-04-06 09:25:36 -07:00
Giuseppe Di Natale c552fbc5f0 Enable shellcheck to run for select scripts
Enable shellcheck to run on zed scripts,
paxcheck.sh, zfs-tests.sh, zfs.sh, and zloop.sh.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5812
2017-03-09 10:20:15 -08:00
Giuseppe Di Natale d25534f875 Bug fixes for single test runs in zfs-tests
Correctly remove the temporary runfile after the
single test is run.

Cleanup and setup scripts are relative to the
test suite's location, correct how we look for
those scripts.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5844
2017-02-28 18:02:48 -08:00
Giuseppe Di Natale d8fa599fab Allow zfs-tests to run a single test
Add a -t flag to zfs-tests to allow a user
to run a single test by providing the path
to the test relative to STF_SUITE.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5775
2017-02-24 10:59:24 -08:00
Matthew Ahrens d7958b4cda OpenZFS 7104 - increase indirect block size
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7104
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4b5c8e9
Closes #5679
2017-02-09 10:27:02 -08:00
Giuseppe Di Natale d21d5b8248 OpenZFS 4521 - zfstest is trying to execute evil "zfs unmount -a"
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
- Correctly set __ZFS_POOL_RESTRICT in inherit_001_pos

OpenZFS-issue: https://www.illumos.org/issues/4521
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8808ac5
Closes #5674
2017-02-03 13:24:44 -08:00
Jinshan Xiong e612379614 Make zfs test easier to run in local install
When ZFS is installed by 'make install', programs will be installed
into '/usr/local'. ZFS test scripts can't locate programs 'zpool'
that caused tests failure.

Fix typo in help message.

Add sanity check to for ksh and generate a useful error message.

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4495
2016-04-12 10:50:01 -07:00
Brian Behlendorf c35b188246 Fix zpool_scrub_* test cases
The zpool_scrub_002, zpool_scrub_003, zpool_scrub_004 test cases fail
reliably when running against small pools or fast storage.  This
occurs because the scrub/resilver operation completes before subsequent
commands can be run.

A one second delay has been added to 10% of zio's in order to ensure
the scrub/resilver operation will run for at least several seconds.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4450
2016-03-30 09:30:34 -07:00
Brian Behlendorf 6bb24f4dc7 Add the ZFS Test Suite
Add the ZFS Test Suite and test-runner framework from illumos.
This is a continuation of the work done by Turbo Fredriksson to
port the ZFS Test Suite to Linux.  While this work was originally
conceived as a stand alone project integrating it directly with
the ZoL source tree has several advantages:

  * Allows the ZFS Test Suite to be packaged in zfs-test package.
    * Facilitates easy integration with the CI testing.
    * Users can locally run the ZFS Test Suite to validate ZFS.
      This testing should ONLY be done on a dedicated test system
      because the ZFS Test Suite in its current form is destructive.
  * Allows the ZFS Test Suite to be run directly in the ZoL source
    tree enabled developers to iterate quickly during development.
  * Developers can easily add/modify tests in the framework as
    features are added or functionality is changed.  The tests
    will then always be in sync with the implementation.

Full documentation for how to run the ZFS Test Suite is available
in the tests/README.md file.

Warning: This test suite is designed to be run on a dedicated test
system.  It will make modifications to the system including, but
not limited to, the following.

  * Adding new users
  * Adding new groups
  * Modifying the following /proc files:
    * /proc/sys/kernel/core_pattern
    * /proc/sys/kernel/core_uses_pid
  * Creating directories under /

Notes:
  * Not all of the test cases are expected to pass and by default
    these test cases are disabled.  The failures are primarily due
    to assumption made for illumos which are invalid under Linux.
  * When updating these test cases it should be done in as generic
    a way as possible so the patch can be submitted back upstream.
    Most existing library functions have been updated to be Linux
    aware, and the following functions and variables have been added.
    * Functions:
      * is_linux          - Used to wrap a Linux specific section.
      * block_device_wait - Waits for block devices to be added to /dev/.
    * Variables:            Linux          Illumos
      * ZVOL_DEVDIR         "/dev/zvol"    "/dev/zvol/dsk"
      * ZVOL_RDEVDIR        "/dev/zvol"    "/dev/zvol/rdsk"
      * DEV_DSKDIR          "/dev"         "/dev/dsk"
      * DEV_RDSKDIR         "/dev"         "/dev/rdsk"
      * NEWFS_DEFAULT_FS    "ext2"         "ufs"
  * Many of the disabled test cases fail because 'zfs/zpool destroy'
    returns EBUSY.  This is largely causes by the asynchronous nature
    of device handling on Linux and is expected, the impacted test
    cases will need to be updated to handle this.
  * There are several test cases which have been disabled because
    they can trigger a deadlock.  A primary example of this is to
    recursively create zpools within zpools.  These tests have been
    disabled until the root issue can be addressed.
  * Illumos specific utilities such as (mkfile) should be added to
    the tests/zfs-tests/cmd/ directory.  Custom programs required by
    the test scripts can also be added here.
  * SELinux should be either is permissive mode or disabled when
    running the tests.  The test cases should be updated to conform
    to a standard policy.
  * Redundant test functionality has been removed (zfault.sh).
  * Existing test scripts (zconfig.sh) should be migrated to use
    the framework for consistency and ease of testing.
  * The DISKS environment variable currently only supports loopback
    devices because of how the ZFS Test Suite expects partitions to
    be named (p1, p2, etc).  Support must be added to generate the
    correct partition name based on the device location and name.
  * The ZFS Test Suite is part of the illumos code base at:
    https://github.com/illumos/illumos-gate/tree/master/usr/src/test

Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6
Closes #1534
2016-03-16 13:46:16 -07:00