This commit allows zvols with names longer than 32 characters, which
fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102.
Changes include:
- use /dev/zd* device names for zvol, where * is the device minor
(include/sys/fs/zfs.h, module/zfs/zvol.c).
- add BLKZNAME ioctl to get dataset name from userland
(include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id).
- add udev rule to create /dev/zvol/[dataset_name] and the legacy
/dev/[dataset_name] symlink. For partitions on zvol, it will create
/dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules,
cmd/zvol_id).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Remove custom code to pack/unpack dev_t's. Under Linux all dev_t's
are an unsigned 32-bit value even on 64-bit platforms. The lower
20 bits are used for the minor number and the upper 12 for the major
number.
This means if your importing a pool from Solaris you may get strange
major/minor numbers. But it doesn't really matter because even if
we add compatibility code to translate the encoded Solaris major/minor
they won't do you any good under Linux. You will still need to
recreate the dev_t with a major/minor which maps to reserved major
numbers used under Linux.
Dropping this code also resolves 32-bit builds by removing the
offending 32-bit compatibility code.
ASSERT3P should be used instead of ASSERT3U when comparing
pointers. Using ASSERT3U with the cast causes a compiler
warning for 32-bit builds which is fatal with --enable-debug.
The underlying storage pool actually uses multiple block
size. Under Solaris frsize (fragment size) is reported as
the smallest block size we support, and bsize (block size)
as the filesystem's maximum block size. Unfortunately,
under Linux the fragment size and block size are often used
interchangeably. Thus we are forced to report both of them
as the filesystem's maximum block size.
Closes#112
Because the secpolicy_* macros are all currently defined to (0).
And because the caller of this function does not check the return
code. The compiler complains that this statement has no effect
which is correct and OK. To suppress the warning explictly cast
the result to (void).
Generally it's a good idea to use enums for switch statements,
but in this case it causes warning because the enum is really a
set of flags. These flags are OR'ed together in some cases
resulting in values which are not part of the original enum.
This causes compiler warning such as this about invalid cases.
error: case value ‘33’ not in enumerated type ‘zprop_source_t’
To handle this we simply case the enum to an int for the switch
statement. This leaves all other enum type checking in place
and effectively disabled these warnings.
The open_bdev_exclusive() function has been replaced (again) by the
more generic blkdev_get_by_path() function. Additionally, the
counterpart function close_bdev_exclusive() has been replaced by
blkdev_put(). Because these functions are more generic versions
of the functions they replaced the compatibility macro must add
the FMODE_EXCL mask to ensure they are exclusive.
Closes#114
For legacy reasons the zvol.c and vdev_disk.c Linux compatibility
code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While
there are worse places for this code to live it should be in a
linux/blkdev_compat.h header. This change moves this block device
Linux compatibility code in to the linux/blkdev_compat.h header
and updates all the correct #include locations. This is not a
functional change or bug fix, it is just code cleanup.
Create the first 0.6.0 release candidate tag (rc1). The Posix
layer is now functional and passes fstest and several other
test suites cleanly. We now need this release candidate tag
to broaden the test coverage before we can release the official
zfs-0.6.0.
When changing the uid/gid of a file via zfs_setattr() use the
Posix id passed in iattr->ia_uid/gid. While the zfs_fuid_create()
code already had the fuid support disabled for Linux it was
returning the uid/gid from the credential. With this change
the 'chown' command which relies on setxattr is now working
properly.
Also remove a little stray white space which was in front of
zfs_update_inode() call and the end of zfs_setattr().
Under Linux sys_symlink(2) should result in a inode being created
with one reference for the inode itself, and a second reference on
the inode which is held by the new dentry. Under Solaris this
appears not to be the case. Their zfs_symlink() handler drops
the inode reference before returning.
The result of this under Linux is that the reference count for
symlinks is always one smaller than it should have been. This
results in a BUG() when the symlink is unlinked. To handle this
the Linux port now keeps the inode reference which differs from
the Solaris behavior. This results in correct reference counts.
Closes#96
The zfs_readlink() function returns a Solaris positive error value
and that needs to be converted to a Linux negative error value.
While in this case nothing would actually go wrong, it's still
incorrect and should be fixed if for no other reason than clarity.
There are three improvements here to 'zpool import' proposed by Fajar
in Github issue #98. They are all good so I'm commiting all three.
1) Add descriptions for "hpet" and "core" blacklist entries.
2) Add "core" to the blacklist, as described in the issue accessing
this device will crash Xen dom0.
3) Refine probing behavior to use fstatat64(). This allows us to
determine if a device is a block device or a regular file without
having to open it. This is the safest appraoch when probing /dev/
because the simple act of opening a device may have unexpected
consequences.
Closes#98
This patch addresses three issues related to symlinks.
1) Revert the zfs_follow_link() function to a modified version
of the original zfs_readlink(). The only changes from the
original OpenSolaris version relate to using Linux types.
For the moment this means no vnode's and no zfsvfs_t. The
caller zpl_follow_link() was also updated accordingly. This
change was reverted because it was slightly gratuitious.
2) Update zpl_follow_link() to use local variables for the
link buffer. I'd forgotten that iov.iov_base is updated by
uiomove() so after the call to zfs_readlink() it can not longer
be used. We need our own private copy of the link pointer.
3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default
MAXPATHLEN is 4096 bytes which is a full page, adding one to
it pushes it slightly over a page. That means you'll likely
end up allocating 2 pages which is wasteful of memory and
possibly slightly slower.
This adds an API to wait for pending commit callbacks of already-synced
transactions to finish processing. This is needed by the DMU-OSD in
Lustre during device finalization when some callbacks may still not be
called, this leads to non-zero reference count errors. See lustre.org
bug 23931.
Before it is safe to unload the zfs module stack all mounted
zfs filesystems must be unmounted. If they are not unmounted,
there will be references held on the modules and the stack cannot
be removed. To handle this have 'zfs.sh -u' which is used by all
of the test scripts umount all zfs filesystem before attempting
to unload the module stack.
Until code is added to support automatically sharing datasets
we should return success instead of failure. This prevents the
command line tools from returning a non-zero error code. While
a user likely won't notice this, test scripts like zconfig.sh
do and correctly fail because of it.
While the attr/xattr hooks were already in place for regular
files this hooks can also apply to directories and special files.
While they aren't typically used in this way, it should be
supported. This patch registers these additional callbacks
for both directory and special inode types.
Under Linux when creating a fifo or socket type device in the ZFS
filesystem it's critical that the rdev is stored in a SA. This
was already being correctly done for character and block devices,
but that logic needed to be extended to include FIFOs and sockets.
This patch takes care of device creation but a follow on patch
may still be required to verify that the dev_t is being correctly
packed/unpacked from the SA.
It was noticed that when you have zvols in multiple datasets
not all of the zvol devices are created at module load time.
Fajarnugraha did the leg work to identify that the root cause of
this bug is a non-zero return value from zvol_create_minors_cb().
Returning a non-zero value from the dmu_objset_find_spa() callback
function results in aborting processing the remaining children in
a dataset. Since we want to ensure that the callback in run on
all children regardless of error simply unconditionally return
zero from the zvol_create_minors_cb(). This callback function
is solely used for this purpose so surpressing the error is safe.
Closes#96
The new prefered inteface for evicting an inode from the inode cache
is the ->evict_inode() callback. It replaces both the ->delete_inode()
and ->clear_inode() callbacks which were previously used for this.
The xattr handler prototypes were sanitized with the idea being that
the same handlers could be used for multiple methods. The result of
this was the inode type was changes to a dentry, and both the get()
and set() hooks had a handler_flags argument added. The list()
callback was similiarly effected but no autoconf check was added
because we do not use the list() callback.
The fsync() callback in the file_operations structure used to take
3 arguments. The callback now only takes 2 arguments because the
dentry argument was determined to be unused by all consumers. To
handle this a compatibility prototype was added to ensure the right
prototype is used. Our implementation never used the dentry argument
either so it's just a matter of using the right prototype.
The const keyword was added to the 'struct xattr_handler' in the
generic Linux super_block structure. To handle this we define an
appropriate xattr_handler_t typedef which can be used. This was
the preferred solution because it keeps the code clean and readable.
Preferentially use the /lib/modules/$(uname -r)/source and
/lib/modules/$(uname -r)/build links. Only if neither of these
links exist fallback to alternate methods for deducing which
kernel to build with. This resolves the need to manually
specify --with-linux= and --with-linux-obj= on Debian systems.
It turns out that older versions of the glibc headers do not
properly define MS_DIRSYNC despite it being explicitly mentioned
in the man pages. They instead call it S_WRITE, so for system
where this is not correct defined map MS_DIRSYNC to S_WRITE.
At the time of this commit both Ubuntu Lucid, and Debian Squeeze
both use the out of date glibc headers.
As for MS_REC this field is also not available in the older headers.
Since there is no obvious mapping in this case we simply disable
the recursive mount option which used it.
The inclusion on dlsym(), dlopen(), and dlclose() symbols require
us to link against the dl library. Be careful to add the flag to
both the libzfs library and the commands which depend on the library.
This file has gotten stale and needed to be updated. There are
individuals who deserve to be recognized for their contributions
to the project. I've done my best to assemble names from the
commit logs of those who have submitted patches. This list may
not be comprehensive, if you feel I've overlooked your contribution
please let me know and we can get your name added.
Initial testing has shown the the right IO scheduler to use under Linux
is noop. This strikes the ideal balance by allowing the zfs elevator
to do all request ordering and prioritization. While allowing the
Linux elevator to do the maximum front/back merging allowed by the
physical device. This yields the largest possible requests for the
device with the lowest total overhead.
While 'noop' should be right for your system you can choose a different
IO scheduler with the 'zfs_vdev_scheduler' option. You may set this
value to any of the standard Linux schedulers: noop, cfq, deadline,
anticipatory. In addition, if you choose 'none' zfs will not attempt
to change the IO scheduler for the block device.
The following warning was observed under normal operation. It's
not fatal but it's something to be addressed long term. Flag the
offending allocation with KM_NODEBUG to suppress the warning and
flag the call site.
SPL: Showing stack for process 21761
Pid: 21761, comm: iozone Tainted: P ----------------
2.6.32-71.14.1.el6.x86_64 #1
Call Trace:
[<ffffffffa05465a7>] spl_debug_dumpstack+0x27/0x40 [spl]
[<ffffffffa054a84d>] kmem_alloc_debug+0x11d/0x130 [spl]
[<ffffffffa05de166>] dmu_buf_hold_array_by_dnode+0xa6/0x4e0 [zfs]
[<ffffffffa05de825>] dmu_buf_hold_array+0x65/0x90 [zfs]
[<ffffffffa05de891>] dmu_read_uio+0x41/0xd0 [zfs]
[<ffffffffa0654827>] zfs_read+0x147/0x470 [zfs]
[<ffffffffa06644a2>] zpl_read_common+0x52/0x70 [zfs]
[<ffffffffa0664503>] zpl_read+0x43/0x70 [zfs]
[<ffffffff8116d905>] vfs_read+0xb5/0x1a0
[<ffffffff8116da41>] sys_read+0x51/0x90
[<ffffffff81013172>] system_call_fastpath+0x16/0x1b
When performing a 'zfs rollback' it's critical to invalidate
the previous dcache and inode cache. If we don't there will
stale cache entries which when accessed will result in EIOs.
These two warnings in libefi serve no real purpose. When running
without DEBUG they are already supressed, and even when DEBUG is
enabled all they indicate is the device doesn't already have an
EFI label. For a Linux machine this is probably the common case.
With the recent SPL change (d599e4fa) that forces cv_destroy()
to block until all waiters have been woken. It is now unsafe
to call cv_destroy() under the zp->z_range_lock() because it
is used as the condition variable mutex. If there are waiters
cv_destroy() will block until they wake up and aquire the mutex.
However, they will never aquire the mutex because cv_destroy()
will not return allowing it's caller to drop the lock. Deadlock.
To avoid this cv_destroy() is now run asynchronously in a taskq.
This solves two problems:
1) It is no longer run under the zp->z_range_lock so no deadlock.
2) Since cv_destroy() may now block we don't want this slowing
down zfs_range_unlock() and throttling the system.
This was not as much of an issue under OpenSolaris because their
cv_destroy() implementation does not do anything. They do however
risk a bad paging request if cv_destroy() returns, the memory holding
the condition variable is free'd, and then the waiters wake up and
try to reference it. It's a very small unlikely race, but it is
possible.
It's worth taking a moment to describe how mmap is implemented
for zfs because it differs considerably from other Linux filesystems.
However, this issue is handled the same way under OpenSolaris.
The issue is that by design zfs bypasses the Linux page cache and
leaves all caching up to the ARC. This has been shown to work
well for the common read(2)/write(2) case. However, mmap(2)
is problem because it relies on being tightly integrated with the
page cache. To handle this we cache mmap'ed files twice, once in
the ARC and a second time in the page cache. The code is careful
to keep both copies synchronized.
When a file with an mmap'ed region is written to using write(2)
both the data in the ARC and existing pages in the page cache
are updated. For a read(2) data will be read first from the page
cache then the ARC if needed. Neither a write(2) or read(2) will
will ever result in new pages being added to the page cache.
New pages are added to the page cache only via .readpage() which
is called when the vfs needs to read a page off disk to back the
virtual memory region. These pages may be modified without
notifying the ARC and will be written out periodically via
.writepage(). This will occur due to either a sync or the usual
page aging behavior. Note because a read(2) of a mmap'ed file
will always check the page cache first even when the ARC is out
of date correct data will still be returned.
While this implementation ensures correct behavior it does have
have some drawbacks. The most obvious of which is that it
increases the required memory footprint when access mmap'ed
files. It also adds additional complexity to the code keeping
both caches synchronized.
Longer term it may be possible to cleanly resolve this wart by
mapping page cache pages directly on to the ARC buffers. The
Linux address space operations are flexible enough to allow
selection of which pages back a particular index. The trick
would be working out the details of which subsystem is in
charge, the ARC, the page cache, or both. It may also prove
helpful to move the ARC buffers to a scatter-gather lists
rather than a vmalloc'ed region.
Additionally, zfs_write/read_common() were used in the readpage
and writepage hooks because it was fairly easy. However, it
would be better to update zfs_fillpage and zfs_putapage to be
Linux friendly and use them instead.
The Linux specific xattr operations have all been located in the
file zpl_xattr.c. These functions primarily rely on the reworked
zfs_* functions to do their job. They are also responsible for
converting the possible Solaris style error codes to negative
Linux errors.
The Linux specific super block operations have all been located in the
file zpl_super.c. These functions primarily rely on the reworked
zfs_* functions to do their job. They are also responsible for
converting the possible Solaris style error codes to negative
Linux errors.
The Linux specific inode operations have all been located in the
file zpl_inode.c. These functions primarily rely on the reworked
zfs_* functions to do their job. They are also responsible for
converting the possible Solaris style error codes to negative
Linux errors.
The Linux specific file operations have all been located in the
file zpl_file.c. These functions primarily rely on the reworked
zfs_* functions to do their job. They are also responsible for
converting the possible Solaris style error codes to negative
Linux errors.
This first zpl_* commit also includes a common zpl.h header with
minimal entries to register the Linux specific hooks. In also
adds all the new zpl_* file to the Makefile.in. This is not a
standalone commit, you required the following zpl_* commits.
For the moment exactly how to handle xvattr is not clear. This
change largely consists of the code to comment out the offending
bits until something reasonable can be done.
A new flag is required for the zfs_rlock code to determine if
it is operation of the zvol of zpl dataset. This used to be
keyed off the zp->z_vnode, which was a hack to begin with, but
with the removal of vnodes we needed a dedicated flag.
I appologize in advance why to many things ended up in this commit.
When it could be seperated in to a whole series of commits teasing
that all apart now would take considerable time and I'm not sure
there's much merrit in it. As such I'll just summerize the intent
of the changes which are all (or partly) in this commit. Broadly
the intent is to remove as much Solaris specific code as possible
and replace it with native Linux equivilants. More specifically:
1) Replace all instances of zfsvfs_t with zfs_sb_t. While the
type is largely the same calling it private super block data
rather than a zfsvfs is more consistent with how Linux names
this. While non critical it makes the code easier to read when
your thinking in Linux friendly VFS terms.
2) Replace vnode_t with struct inode. The Linux VFS doesn't have
the notion of a vnode and there's absolutely no good reason to
create one. There are in fact several good reasons to remove it.
It just adds overhead on Linux if we were to manage one, it
conplicates the code, and it likely will lead to bugs so there's
a good change it will be out of date. The code has been updated
to remove all need for this type.
3) Replace all vtype_t's with umode types. Along with this shift
all uses of types to mode bits. The Solaris code would pass a
vtype which is redundant with the Linux mode. Just update all the
code to use the Linux mode macros and remove this redundancy.
4) Remove using of vn_* helpers and replace where needed with
inode helpers. The big example here is creating iput_aync to
replace vn_rele_async. Other vn helpers will be addressed as
needed but they should be be emulated. They are a Solaris VFS'ism
and should simply be replaced with Linux equivilants.
5) Update znode alloc/free code. Under Linux it's common to
embed the inode specific data with the inode itself. This removes
the need for an extra memory allocation. In zfs this information
is called a znode and it now embeds the inode with it. Allocators
have been updated accordingly.
6) Minimal integration with the vfs flags for setting up the
super block and handling mount options has been added this
code will need to be refined but functionally it's all there.
This will be the first and last of these to large to review commits.
For the moment we do not use dmu_write_pages() to write pages
directly in to a dmu object. It may be required at some point
in the future, but for now is simplest and cleanest to drop it.
It can be easily readded if/when needed.
For portability reasons it's handy to be able to create a root
znode and basic filesystem components without requiring the full
cooperation of the VFS. We are committing to this to simply the
filesystem creations code.
This code is used for snapshot and heavily leverages Solaris
functionality we do not want to reimplement. These files have
been removed, including references to them, and will be replaced
by a zfs_snap.c/zpl_snap.c implementation which handles snapshots.
Minor update to ensure zfs_sync() is disabled if a kernel oops/panic
is triggered. As the comment says 'data integrity is job one'. This
change could have been done by defining panicstr to oops_in_progress
in the SPL. But I felt it was better to use the native Linux API
here since to be clear.
Fajar A. Nugraha
Darik Horn
Brian Behlendorf
Ricardo M. Correia