Commit Graph

7062 Commits

Author SHA1 Message Date
Philipp Riederer 1833de8103 Fix error propagation from lzc_send_redacted
Any error from lzc_send_redacted is overwritten by the error of
send_conclusion_record; skip writing the conclusion record if there
was an earlier error.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Philipp Riederer <philipp@riederer.email>
Closes #12766
2022-02-03 15:28:01 -08:00
наб a1a52a356b freebsd/libshare: nfs: don't send SIGHUP to all processes
pidfile_open() sets *pidptr to -1 if the process currently holding
the lock is between pidfile_open() and pidfile_write(),
the subsequent kill(mountdpid) would potentially SIGHUP all
non-system processes except init: just sleep for half a millisecond
and try again in that case

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12067
2022-02-03 15:28:01 -08:00
Brian Behlendorf 9ec630ff2c Fix zvol_open() lock inversion
When restructuring the zvol_open() logic for the Linux 5.13 kernel
a lock inversion was accidentally introduced.  In the updated code
the spa_namespace_lock is now taken before the zv_suspend_lock
allowing the following scenario to occur:

    down_read <=== waiting for zv_suspend_lock
    zvol_open <=== holds spa_namespace_lock
    __blkdev_get
    blkdev_get_by_dev
    blkdev_open
    ...

     mutex_lock <== waiting for spa_namespace_lock
     spa_open_common
     spa_open
     dsl_pool_hold
     dmu_objset_hold_flags
     dmu_objset_hold
     dsl_prop_get
     dsl_prop_get_integer
     zvol_create_minor
     dmu_recv_end
     zfs_ioc_recv_impl <=== holds zv_suspend_lock via zvol_suspend()
     zfs_ioc_recv
     ...

This commit resolves the issue by moving the acquisition of the
spa_namespace_lock back to after the zv_suspend_lock which restores
the original ordering.

Additionally, as part of this change the error exit paths were
simplified where possible.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12863
2022-02-03 15:28:01 -08:00
Alan Somers 4b2bac5fe9 FreeBSD: Update argument types for VOP_READDIR
A recent commit to FreeBSD changed the type of
vop_readdir_args.a_cookies to a uint64_t**.  There is no functional
impact to ZFS because ZFS only uses 32-bit cookies, which will be
zero-extended to 64-bits by the existing code.

b214fcceac

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #12874
2022-02-03 15:28:01 -08:00
Alexander Motin 786abf5321 Reduce number of arc_prune threads
On FreeBSD vnode reclamation is single-threaded, protected by single
global lock.  Linux seems to be able to use a thread per mount point,
but at this time it creates more harm than good.

Reduce number of threads to 1, adding tunable in case somebody wants
to try more.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12896
Issue #9966
2022-02-03 15:28:01 -08:00
Ryan Moeller 913ae45218 FreeBSD: Provide correct file generation number
va_seq was actually a thin veil over va_gen, so z_gen is a more
appropriate value than z_seq to populate the field with.

Drop the unnecessary compat obfuscation and provide the correct
file generation number.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <freqlabs@freebsd.org>
Closes #12851
2022-02-03 15:28:01 -08:00
Tony Hutter af88d47f1e Tag zfs-2.1.2
META file and changelog updated.

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
2021-12-13 15:00:39 -08:00
Till Maas 24221589dd zfs-dkms rpm: Fix scriptlets dependencies
To ensure that the necessary packages are available during the %post and
%preun scriptlets, require them properly.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Till Maas <opensource@till.name>
Closes #12822
Closes #12832
2021-12-13 13:23:48 -08:00
Ryan Moeller def73c0735 FreeBSD: Add vop_standard_writecount_nomsync
https://cgit.freebsd.org/src/commit?id=3ffcfa599e29686cf2b3c1a6087408c37acaed78

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #12828
2021-12-13 13:23:07 -08:00
Ryan Moeller effe984148 FreeBSD: Catch up with more VFS changes
Unused thread argument was removed from NDINIT*

https://cgit.freebsd.org/src/commit?id=7e1d3eefd410ca0fbae5a217422821244c3eeee4

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #12828
2021-12-13 13:23:01 -08:00
Mark Johnston 19337332cc Fix several bugs in the FreeBSD rename VOP implementation
- To avoid a use-after-free, zfsvfs->z_log needs to be loaded after the
  teardown lock is acquired with ZFS_ENTER().
- Avoid leaking vnode locks in zfs_rename_relock() and zfs_rename_()
  when the ZFS_ENTER() macros forces an early return.

Refactor the rename implementation so that ZFS_ENTER() can be used
safely.  As a bonus, this lets us use the ZFS_VERIFY_ZP() macro instead
of open-coding its implementation.

Reported-by: Peter Holm <pho@FreeBSD.org>
Tested-by: Peter Holm <pho@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: The FreeBSD Foundation
Closes #12717
2021-12-13 13:22:54 -08:00
Pawel Jakub Dawidek b96737b83e Remove (now unused) td argument from zfs_lookup()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #12748
2021-12-13 13:22:47 -08:00
Mark Johnston 4b7bfcf8a0 Exit the teardown section later in rename on FreeBSD
We have to hold the teardown lock while dereferencing zfsvfs->z_os and,
I believe, when committing to the ZIL.

Note that jumping to the "out" label, "error" is always non-zero.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12704
2021-12-13 13:22:41 -08:00
Mark Johnston 07165ce540 Fix potential use-after-frees in FreeBSD getpages and setattr VOPs
The objset object is reallocated during certain dataset operations, such
as rollbacks, so the objset pointer must be loaded after acquiring the
teardown lock.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12704
2021-12-13 13:22:34 -08:00
Brian Behlendorf 6ed7d77b44 ZTS: import_rewind_device_replaced reliably fails
The import_rewind_device_replaced.ksh test was never entirely reliable
because it depends on MOS data not being overwritten.  The MOS data is
not protected by the snapshot so occasional failures were always
expected.  However, this test is now failing reliably on all platforms
indicating something has changed in the code since the test was marked
"maybe".  Convert the test to a "known" failure until the root cause
is identified and resolved.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12821
2021-12-08 13:28:09 -08:00
Damian Szuberski 64e88992b6 Update `checkstyle` workflow env to ubuntu-20.04
- `checkstyle` workflow uses ubuntu-20.04 environment
- improved `mancheck.sh` readability

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12713
2021-12-08 13:27:56 -08:00
Brian Behlendorf ad15fb430a Linux 5.15 compat: META (#12824)
The final 5.15 kernel is available and has been tested.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
2021-12-07 17:05:04 -08:00
Paul Dagnelie 57f6a050e6 ZFS send/recv with ashift 9->12 leads to data corruption
Improve the ability of zfs send to determine if a block is compressed
or not by using information contained in the blkptr.

Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Matthew Ahrens <matthew.ahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #12770
2021-12-07 17:04:34 -08:00
Coleman Kane b3b293c9fc Linux 5.16: Resolve ZSTD_isError symbol collision in Linux kernel
Newer zstd code introduced in the main kernel tree now creates a symbol
collision with ZSTD_isError in our ZSTD code. This change relabels our
implementation with a ZFS-specific symbol name, and undoes some
macro-based micro-optimizations that conflict with the attempt to rename
our internal-use version.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 13:14:24 -08:00
Coleman Kane bef7c02c81 Linux 5.16: The blk-cgroup.h header is where struct blkcg_gq is defined
The definition of struct blkcg_gq was moved into blk-cgroup.h, which is
a header that's been in Linux since 2015. This is used by
vdev_blkg_tryget() in module/os/linux/zfs/vdev_disk.c. Since the kernel
for CentOS 7 and similar-generation releases doesn't have this header,
its inclusion is guarded by a configure test.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 13:14:23 -08:00
Coleman Kane ea61e07413 Linux 5.16: bio_set_dev is no longer a helper macro
This change adds a confiugre check to determine if bio_set_dev is a
helper macro or not. If not, then the attempt to override its internal
call to bio_associate_blkg(), with a macro definition to our own
version, is no longer possible, as the compiler won't use it when
compiling the new inline function replacement implemented in the header.
This change also creates a new vdev_bio_set_dev() function that performs
the same work, and also performs the work implemented in
vdev_bio_associate_blkg(), as it is the only thing calling that function
in our code. Our custom vdev_bio_associate_blkg() is now only compiled
if the bio_set_dev() is a macro in the Linux headers.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 13:14:23 -08:00
Coleman Kane 9519fe1ff8 Linux 5.16: type member of iov_iter renamed iter_type
The iov_iter->type member was renamed iov_iter->iter_type. However,
while looking into this, realized that in 2018 a iov_iter_type(*iov)
accessor function was introduced. So if that is present, use it,
otherwise fall back to trying the existing behavior of directly
accessing type from iov_iter.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 13:14:23 -08:00
Coleman Kane 0c40ff56f2 Linux 5.16: block_device_operations->submit_bio now returns void
The return type for the submit_bio member of struct
block_device_operations was changed to no longer return a value.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 13:14:23 -08:00
Coleman Kane 806c3777e7 Linux 5.16 compat: asm/fpu/xcr.h is new location for xgetbv/xsetbv
Linux 5.16 moved these functions into this new header in commit
1b4fb8545f2b00f2844c4b7619d64d98440a477c. This change adds code to look
for the presence of this header, and include it so that the code using
xgetbv & xsetbv will compile again.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12800
2021-12-07 13:14:23 -08:00
наб ac9b1aa1bf tests/file_check: remove unused variable
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12187
2021-12-06 13:52:34 -08:00
John Wren Kennedy e20186f5d5 Strip colons from all test result filenames
The upload artifact functionality in github can't handle colons in
filenames. The current code handles this for files under the most
recent set of results. With the ability to rerun failed tests, now
there can be multiple sets of results, and they all need to be
processed in the same way.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #12815
2021-12-06 12:23:02 -08:00
Brian Behlendorf 16da688f25 Linux 5.13 compat: retry zvol_open() when contended
Due to a possible lock inversion the zvol open call path on Linux
needs to be able to retry in the case where the spa_namespace_lock
cannot be acquired.

For Linux 5.12 an older kernel this was accomplished by returning
-ERESTARTSYS from zvol_open() to request that blkdev_get() drop
the bdev->bd_mutex lock, reaquire it, then call the open callback
again.  However, as of the 5.13 kernel this behavior was removed.

Therefore, for 5.12 and older kernels we preserved the existing
retry logic, but for 5.13 and newer kernels we retry internally in
zvol_open().  This should always succeed except in the case where
a pool's vdev are layed on zvols, in which case it may fail.  To
handle this case vdev_disk_open() has been updated to retry when
opening a device when -ERESTARTSYS is returned.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #12301
Closes #12759
2021-12-06 12:22:57 -08:00
John Wren Kennedy e9ee57f682 Temporarily remove tests from sanity runfile
With the addition of functionality to rerun failing tests, some
tests that fail only sometimes still fail often enough to degrade
the reliability of the sanity runs. Remove them from the runfile
until they reliably pass.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #12814
2021-12-06 12:22:51 -08:00
Paul Dagnelie d346361515 Add zfs-test facility to automatically rerun failing tests
This was a project proposed as part of the Quality theme for the
hackthon for the 2021 OpenZFS Developer Summit. The idea is to improve
the usability of the automated tests that get run when a PR is created
by having failing tests automatically rerun in order to make flaky
tests less impactful.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #12740
2021-12-06 12:22:43 -08:00
Coleman Kane 12d27e7134 Linux 5.16: wait_on_page_bit() no longer available to modules
Instead, linux/pagemap.h offers a number of folio-specific functions to
be called instead. In this case, module/os/linux/zfs/zfs_vnops_os.c
wants to call wait_on_page_bit(pp, PG_writeback). This gets replaced
with folio_wait_bit(folio_page(pp), PG_writeback). This change modifies
the code to conditionally compile that if configure identifies th
presence of the folio_wait_bit() function.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12800
2021-12-06 12:22:38 -08:00
Jorgen Lundman a1a29bf8fc Iterate encrypted clones at zvol_create_minor
Userland figures out which encryption-root keys are required to load,
and issues ZFS_IOC_LOAD_KEY.
The tail section of spa_keystore_load_wkey() will call
zvol_create_minors() on the encryption-root object.

Any clones of the encrypted zvol will not be plumbed. This commits
adds additional logic to detect if zvol has clones, and is encrypted,
then adds these to the list of zvols to call zvol_create_minors() on.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #12471
2021-12-06 12:22:32 -08:00
Brian Behlendorf ea0dda5999 Exclude zfs_copies_003_pos on Linux
This test case may fail on 5.13 and newer Linux kernels if the
/dev/zvol/ device is not created by udev.

Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #12301
Closes  #12738
2021-11-12 16:20:15 -08:00
Brian Behlendorf d7e640cf95 Restore dirty dnode detection logic
In addition to flushing memory mapped regions when checking holes,
commit de198f2d95 modified the dirty dnode detection logic to check
the dn->dn_dirty_records instead of the dn->dn_dirty_link.  Relying
on the dirty record has not be reliable, switch back to the previous
method.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #11900 
Closes #12745
2021-11-05 09:45:04 -07:00
Brian Behlendorf 664d487a5d Fix lseek(SEEK_DATA/SEEK_HOLE) mmap consistency
When using lseek(2) to report data/holes memory mapped regions of
the file were ignored.  This could result in incorrect results.
To handle this zfs_holey_common() was updated to asynchronously
writeback any dirty mmap(2) regions prior to reporting holes.

Additionally, while not strictly required, the dn_struct_rwlock is
now held over the dirty check to prevent the dnode structure from
changing.  This ensures that a clean dnode can't be dirtied before
the data/hole is located.  The range lock is now also taken to
ensure the call cannot race with zfs_write().

Furthermore, the code was refactored to provide a dnode_is_dirty()
helper function which checks the dnode for any dirty records to
determine its dirtiness.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #11900
Closes #12724
2021-11-05 08:08:55 -07:00
Dimitri John Ledkov 5bf81fea2f Upgrade to libabigail 2.0.0
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Closes #12722
Closes #12739
2021-11-05 07:59:40 -07:00
Tony Hutter 1fca958615 zed: Control NVMe fault LEDs
The ZED code currently can only turn on the fault LED for
a faulted disk in a JBOD enclosure.  This extends support
for faulted NVMe disks as well.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #12648
Closes #12695
2021-11-05 07:51:21 -07:00
Brian Behlendorf 22b0891dbb Linux 5.16 compat: submit_bio()
The submit_bio() prototype has changed again.  The version is 5.16
still only expects a single argument but the return type has changed
to void.  Since we never used the returned value before update the
configure check to detect both single arg versions.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12725
2021-11-05 07:51:21 -07:00
Brian Behlendorf 0e537a0195 Linux 5.16 compat: linux/elevator.h
Commit https://github.com/torvalds/linux/commit/2e9bc346 moved
the elevator.h header under the block/ directory as part of some
refactoring.  This turns out not to be a problem since there's
no longer anything we need from the header.  This has been the
case for some time, this change removes the elevator.h include
and replaces it with a major.h include.

Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12725
2021-11-05 07:51:21 -07:00
Tony Hutter db9e1c907a vdev_id: Fix PHY sorting
One of our developers noticed a bug in vdev_id where we were incorrectly
sorting PHYs using alphabetical sorting (which usually works) instead
of natural sorting (-v).  For example:

	[port-0:0]# ls -d phy*
	phy-0:10  phy-0:11  phy-0:8  phy-0:9

	[port-0:0]# ls -vd phy*
	phy-0:8  phy-0:9  phy-0:10  phy-0:11

This fixes the issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #12699
2021-11-02 16:31:17 -07:00
Tony Hutter d11b03ed81 vdev_id: Fix enclosure_symlinks feature
The vdev_id.conf "enclosure_symlinks" option persistently creates
and maps /dev/by-enclosure symlinks to dynamic /dev/sg* devices.

This patch fixes two issues:

1. The enclosure_symlinks feature was accidentally broken in:

   vdev_id: Support daisy-chained JBODs in multipath mode

2. Even when working, the feature numbered the enclosure
   sequentially rather than by HBA port number.  That meant that
   if a port was down or didn't appear in sysfs, then the
   enclosure_sumlinks numbers would be numbered wrong.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #12660
2021-11-02 16:31:11 -07:00
Tony Hutter 586b5d366e Rescan enclosure sysfs path on import
When you create a pool, zfs writes vd->vdev_enc_sysfs_path with the
enclosure sysfs path to the fault LEDs, like:

    vdev_enc_sysfs_path = /sys/class/enclosure/0:0:1:0/SLOT8

However, this enclosure path doesn't get updated on successive imports
even if enclosure path to the disk changes.  This patch fixes the issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #11950
Closes #12095
2021-11-02 16:31:05 -07:00
Ryan Moeller 27d9c6ae2b FreeBSD: Catch up with recent VFS changes
cn_thread is always curthread.

https://cgit.freebsd.org/src/commit?id=b4a58fbf640409a1e507d9f7b411c83a3f83a2f3
https://cgit.freebsd.org/src/commit?id=2b68eb8e1dbbdaf6a0df1c83b26f5403ca52d4c3

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Alan Somers <asomers@gmail.com>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #12668
2021-11-02 13:48:54 -07:00
Martin Matuška b7ecb4ff0d FreeBSD: fix compilation of FreeBSD world after 29274c9f6
prng32_bounded() is available to kernel only on FreeBSD 13+.

Call inline random_get_pseudo_bytes() with correct pointer type.
To be consistent, apply to Linux as well.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes #12282
2021-11-02 13:35:47 -07:00
Brian Behlendorf af9aa4a216 ZTS: Standardize use of destroy_dataset in cleanup
When cleaning up a test case standardize on using the convention:

    datasetexists $ds && destroy_dataset $ds <flags>

By using 'destroy_dataset' instead of 'log_must zfs destroy' we ensure
that the destroy is retried in the event that a ZFS volume is busy.
This helps ensures ensure tests are fully cleaned up and prevents false
positive test failures on Linux.

Note that all of the tests which used 'zfs destroy' in cleanup have
been updated even if they don't use volumes.  This was done to
clearly establish the expected convention.

Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12663
2021-11-02 09:51:32 -07:00
Rich Ercolani 55ab3773d7 Workaround cloud-init hotplug issue
cloud-init added a hook which triggers on every device add/rm
event, which results in holding open devices for a while after
they're created/destroyed.

So let's shove an exclusion rule for that into the GH workflows
until it gets fixed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12644
Closes #12669
2021-11-02 09:51:32 -07:00
Brian Behlendorf 143476ce8d Use fallthrough macro
As of the Linux 5.9 kernel a fallthrough macro has been added which
should be used to anotate all intentional fallthrough paths.  Once
all of the kernel code paths have been updated to use fallthrough
the -Wimplicit-fallthrough option will because the default.  To
avoid warnings in the OpenZFS code base when this happens apply
the fallthrough macro.

Additional reading: https://lwn.net/Articles/794944/

Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12441
2021-11-02 09:50:30 -07:00
Kevin Bowling d8a97a7be2
Detect HAVE_LARGE_STACKS at compile time (#12584)
Move HAVE_LARGE_STACKS definitions to header and set when appropriate.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Kevin Bowling <kbowling@FreeBSD.org>
Closes #12350
2021-11-01 14:56:18 -07:00
Rich Ercolani 8cd9f20a34
Correct a flaw in the Python 3 version checking (#12636)
It turns out the ax_python_devel.m4 version check assumes that
("3.X+1.0" >= "3.X.0") is True in Python, which is not when X+1
is 10 or above and X is not. (Also presumably X+1=100 and ...)

So let's remake the check to behave consistently, using the
"packaging" or (if absent) the "distlib" modules.

(Also, update the Github workflows to use the new packages.)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes: #12073
2021-11-01 14:54:47 -07:00
Brian Behlendorf 71c6098526 Tag 2.1.1
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2021-09-15 13:37:50 -07:00
Brian Behlendorf a3da79d582 Linux 5.14 compat: META
Increase the Linux-Maximum version in the META file to 5.14.
All of the required compatibility patches have been merged
and the 5.14 kernel has been officially released.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12565
2021-09-15 13:24:34 -07:00