Commit Graph

59 Commits

Author SHA1 Message Date
Richard Yao 6576a1a70d Fix incorrect type in spl_kmem_cache_set_move() parameter
A preprocessor definition renders this harmless. However, it is a good
idea to change this to be consistent.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
2012-08-01 16:35:18 -07:00
Richard Yao 36811b4430 Detect kernels that honor gfp flags passed to vmalloc()
zfsonlinux/spl@2092cf68d8 used
PF_MEMALLOC to workaround a bug in the Linux kernel where
allocations did not honor the gfp flags passed to vmalloc().
Unfortunately, PF_MEMALLOC has the side effect of permitting
allocations to allocate pages outside of ZONE_NORMAL. This
has been observed to result in the depletion of ZONE_DMA32.

A kernel patch is available in the Gentoo bug tracker for
this issue.

  https://bugs.gentoo.org/show_bug.cgi?id=416685

This negates any benefit PF_MEMALLOC provides, so we introduce
an autotools check to disable the use of PF_MEMALLOC on
systems with patched kernels.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #126
2012-07-11 11:44:27 -07:00
Richard Yao 973e8269bd Constify memory management functions
This prevents warnings in ZFS that were caused by changes necessary to
support PaX patched kernels. When debugging is enabled, these warnings
become build failures.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #131
2012-07-03 16:07:27 -07:00
Brian Behlendorf b78d4b9d98 Ensure a minimum of one slab is reclaimed
To minimize the chance of triggering an OOM during direct reclaim.
The kmem caches have been improved to make a best effort to reclaim
at least one slab when a reclaim function is registered.  This helps
avoid the case where objects are released but they are spread over
multiple slabs so no memory gets reclaimed.

Care has been taken to avoid deadlocking if the reclaim function
is unable to make forward progress.  Additionally, the reclaim
function may be skipped entirely if there are already free slabs
which can be safely reaped.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #107
2012-05-07 11:54:28 -07:00
Brian Behlendorf 06089b9e19 Ensure direct reclaim forward progress
The Linux direct reclaim path uses this out of band value to
determine if forward progress is being made.  Normally this is
incremented by kmem_freepages() which is part of the various
Linux slab implementations.  However, since we are using none
of that infrastructure we're responsible for incrementing this
count.

If no forward progress is detected and a subsequent allocation
fails the OOM killer will be invoked.  If there was forward
progress additional reclaim will be attempted via the page
cache and registerd shrinker until the allocation succeeds.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #107
2012-05-07 11:54:19 -07:00
Prakash Surya c0e0fc14e3 Ignore slab cache age and delay in direct reclaim
When memory pressure triggers direct memory reclaim, a slabs age
and delay should not prevent it from being freed. This patch ensures
these values are ignored, allowing an empty slab to be freed in this
code path no matter the value of its age and delay.

This prevents needless scanning of the partial slabs and has been
observed to significantly reduce the total cpu usage.  In addition,
it should allow for snappier reclaim under memory pressure.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #102
2012-05-07 11:50:04 -07:00
Prakash Surya cef7605c34 Throttle number of freed slabs based on nr_to_scan
Previously, the SPL tried to maintain Solaris semantics by freeing
all available (empty) slabs from its slab caches when the shrinker
was called. This is not desirable when running on Linux. To make
the SPL shrinker more Linux friendly, the actual number of freed
slabs from each of the slab caches is now derived from nr_to_scan
and skc_slab_objs.

Additionally, an accounting bug was fixed in spl_slab_reclaim()
which could cause us to reclaim one more slab than requested.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #101
2012-05-07 11:46:15 -07:00
Brian Behlendorf 4b2220f0b9 Add --enable-debug-log configure option
Until now the notion of an internal debug logging infrastructure
was conflated with enabling ASSERT()s.  This patch clarifies things
by cleanly breaking the two subsystem apart.  The result of this
is the following behavior.

--enable-debug      - Enable/disable code wrapped in ASSERT()s.
--disable-debug       ASSERT()s are used to check invariants and
                      are never required for correct operation.
                      They are disabled by default because they
                      may impact performance.

--enable-debug-log  - Enable/disable the debug log infrastructure.
--disable-debug-log   This infrastructure allows the spl code and
                      its consumer to log messages to an in-kernel
                      log.  The granularity of the logging can be
                      controlled by a debug mask.  By default the
                      mask disables most debug messages resulting
                      in a negligible performance impact.  Because
                      of this the debug log is enabled by default.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-02 11:27:54 -08:00
Brian Behlendorf 5f6c14b1ed Proxmox VE kernel compat, invalidate_inodes()
The Proxmox VE kernel contains a patch which renames the function
invalidate_inodes() to invalidate_inodes_check().  In the process
it adds a 'check' argument and a '#define invalidate_inodes(x)'
compatibility wrapper for legacy callers.  Therefore, if either
of these functions are exported invalidate_inodes() can be
safely used.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #58
2011-12-21 14:29:45 -08:00
Brian Behlendorf fe71c0e567 Linux 3.1 compat, shrink_*cache_memory
As of Linux 3.1 the shrink_dcache_memory and shrink_icache_memory
functions have been removed.  This same task is now accomplished
more cleanly with per super block shrinkers.  This unfortunately
leaves us no easy way to support the dnlc_reduce_cache() function.

This support has always been entirely optional.  So when no
reasonable interface is available allow the dnlc_reduce_cache()
function to effectively become a no-op.

The downside of this change is that it will prevent the zfs arc
meta data limts from being enforced.  However, the current zfs
implementation in this regard is already flawed and needs to
be reworked.  If the arc needs to enfore a meta data limit it
will need to be extended to coordinate directly with the zpl.
This will allow us to drop all this compatibility code and get
more fine grained control over the cache management.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #52
2011-11-09 19:36:30 -08:00
Brian Behlendorf b8b6e4c453 Fix NULL deref in balance_pgdat()
Be careful not to unconditionally clear the PF_MEMALLOC bit in
the task structure.  It may have already been set when entering
kv_alloc() in which case it must remain set on exit.  In
particular the kswapd thread will have PF_MEMALLOC set in
order to prevent it from entering direct reclaim.  By clearing
it we allow the following NULL deref to potentially occur.

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: [<ffffffff8109c7ab>] balance_pgdat+0x25b/0x4ff

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes ZFS issue #287
2011-11-03 09:50:22 -07:00
Brian Behlendorf ecc3981007 Fix various typos in comments
Just clean up some of the typos and spelling mistakes in the
comments of spl-kmem.c.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-10-11 10:32:49 -07:00
Gunnar Beutner 8d177c181f Fixed typo in spl_slab_alloc()
The typo did not have any effect (apart from a negligible performance
impact) because skc->skc_flags * KMC_OFFSLAB is always non-null when
at least one bit in skc->skc_flags is set.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-10-11 10:03:43 -07:00
Gunnar Beutner 64c075c3f4 Properly destroy work items in spl_kmem_cache_destroy()
In a non-debug build the ASSERT() would be optimized away
which could cause pending work items to not be cancelled.

We must also use cancel_delayed_work_sync() rather than just
cancel_delayed_work() to actually wait until work items have
completed.  Otherwise they might accidentally access free'd
memory.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes ZFS bugs #279, #62, #363, #418
2011-10-11 09:59:19 -07:00
Brian Behlendorf a55bcaad18 Linux 3.0: Shrinker compatibility
Update the the wrapper macros for the memory shrinker to handle
this 4th API change.  The callback function now takes a
shrink_control structure.  This is certainly a step in the
right direction but it's annoying to have to accomidate yet
another version of the API.
2011-06-21 14:02:39 -07:00
Brian Behlendorf 9b0f9079d2 Linux 2.6.39 compat, invalidate_inodes()
To resolve a potiential filesystem corruption issue a second
argument was added to invalidate_inodes().  This argument controls
whether dirty inodes are dropped or treated as busy when invalidating
a super block.  When only the legacy API is available the second
argument will be dropped for compatibility.
2011-04-19 09:08:08 -07:00
Brian Behlendorf e76f4bf11d Add dnlc_reduce_cache() support
Provide the dnlc_reduce_cache() function which attempts to prune
cached entries from the dcache and icache.  After the entries are
pruned any slabs which they may have been using are reaped.

Note the API takes a reclaim percentage but we don't have easy
access to the total number of cache entries to calculate the
reclaim count.  However, in practice this doesn't need to be
exactly correct.  We simply need to reclaim some useful fraction
(but not all) of the cache.  The caller can determine if more
needs to be done.
2011-04-06 20:06:03 -07:00
Brian Behlendorf 495bd532ab Linux shrinker compat
The Linux shrinker has gone through three API changes since 2.6.22.
Rather than force every caller to understand all three APIs this
change consolidates the compatibility code in to the mm-compat.h
header.  The caller then can then use a single spl provided
shrinker API which does the right thing for your kernel.

SPL_SHRINKER_CALLBACK_PROTO(shrinker_callback, cb, nr_to_scan, gfp_mask);
SPL_SHRINKER_DECLARE(shrinker_struct, shrinker_callback, seeks);
spl_register_shrinker(&shrinker_struct);
spl_unregister_shrinker(&&shrinker_struct);
spl_exec_shrinker(&shrinker_struct, nr_to_scan, gfp_mask);
2011-04-06 20:06:03 -07:00
Brian Behlendorf 2092cf68d8 Disable vmalloc() direct reclaim
As part of vmalloc() a __pte_alloc_kernel() allocation may occur.  This
internal allocation does not honor the gfp flags passed to vmalloc().
This means even when vmalloc(GFP_NOFS) is called it is possible that a
synchronous reclaim will occur.  This reclaim can trigger file IO which
can result in a deadlock.  This issue can be avoided by explicitly
setting PF_MEMALLOC on the process to subvert synchronous reclaim when
vmalloc() is called with !__GFP_FS.

An example stack of the deadlock can be found here (1), along with the
upstream kernel bug (2), and the original bug discussion on the
linux-mm mailing list (3).  This code can be properly autoconf'ed
when the upstream bug is fixed.

1) http://github.com/behlendorf/zfs/issues/labels/Vmalloc#issue/133
2) http://bugzilla.kernel.org/show_bug.cgi?id=30702
3) http://marc.info/?l=linux-mm&m=128942194520631&w=4
2011-03-20 15:12:08 -07:00
Brian Behlendorf 914b063133 Linux compat 2.6.37, invalidate_inodes()
In the 2.6.37 kernel the function invalidate_inodes() is no longer
exported for use by modules.  This memory management functionality
is needed to invalidate the inodes attached to a super block without
unmounting the filesystem.

Because this function still exists in the kernel and the prototype
is available is a common header all we strictly need is the symbol
address.  The address is obtained using spl_kallsyms_lookup_name()
and assigned to the variable invalidate_inodes_fn.  Then a #define
is used to replace all instances of invalidate_inodes() with a
call to the acquired address.  All the complexity is hidden behind
HAVE_INVALIDATE_INODES and invalidate_inodes() can be used as usual.

Long term we should try to get this, or another, interface made
available to modules again.
2011-02-23 12:44:32 -08:00
Brian Behlendorf 23aa63cbf5 Fix 2.6.35 shrinker callback API change
As of linux-2.6.35 the shrinker callback API now takes an additional
argument.  The shrinker struct is passed to the callback so that users
can embed the shrinker structure in private data and use container_of()
to access it.  This removes the need to always use global state for the
shrinker.

To handle this we add the SPL_AC_3ARGS_SHRINKER_CALLBACK autoconf
check to properly detect the API.  Then we simply setup a callback
function with the correct number of arguments.  For now we do not make
use of the new 3rd argument.
2010-10-22 14:51:26 -07:00
Brian Behlendorf 2b3543025c Stub out kmem cache defrag API
At some point we are going to need to implement the kmem cache
move callbacks to allow for kmem cache defragmentation.  This
commit simply lays a small part of the API ground work, it does
not actually implement any of this feature.  This is safe for
now because the move callbacks are just an optimization.  Even
if they are registered we don't ever really have to call them.
2010-08-27 14:23:42 -07:00
Brian Behlendorf 41f84a8d56 Strfree() should call kfree() not kmem_free()
Using kmem_free() results in deducting X bytes from the memory
accounting when --enable-debug is set.  Unfortunately, currently
the counterpart kmem_asprintf() and friends do not properly
account for memory allocated, so we must do the same on free.
If we don't then we end up with a negative number of lost bytes
reported when the module is unloaded.

A better long term fix would be to add the accounting in to the
allocation side but that's a project for another day.
2010-07-30 22:20:58 -07:00
Brian Behlendorf 10129680f8 Ensure kmem_alloc() and vmem_alloc() never fail
The Solaris semantics for kmem_alloc() and vmem_alloc() are that they
must never fail when called with KM_SLEEP.  They may only fail if
called with KM_NOSLEEP otherwise they must block until memory is
available.  This is quite different from how the Linux memory
allocators work, under Linux a memory allocation failure is always
possible and must be dealt with.

At one point in the past the kmem code did properly implement this
behavior, however as the code evolved this behavior was overlooked
in places.  This patch goes through all three implementations of
the kmem/vmem allocation functions and ensures that they will all
block in the KM_SLEEP case when memory is not available.  They
may still fail in the KM_NOSLEEP case in which case the caller
is responsible for handling the failure.

Special care is taken in vmalloc_nofail() to avoid thrashing the
system on the virtual address space spin lock.  The down side of
course is if you do see a failure here, which is unlikely for
64-bit systems, your allocation will delay for an entire second.
Still this is preferable to locking up your system and it is the
best we can do given the constraints.

Additionally, the code was cleaned up to be much more readable
and comments were added to describe the various kmem-debug-*
configure options.  The default configure options remain:
"--enable-debug-kmem --disable-debug-kmem-tracking"
2010-07-26 15:47:55 -07:00
Ricardo M. Correia 2c762de830 Fix buggy kmem_{v}asprintf() functions
When the kvasprintf() call fails they should reset the arguments
by calling va_start()/va_copy() and va_end() inside the loop,
otherwise they'll try to read more arguments rather than starting
over and reading them from the beginning.

Signed-off-by: Ricardo M. Correia <ricardo.correia@oracle.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-07-20 13:51:46 -07:00
Brian Behlendorf b17edc10a9 Prefix all SPL debug macros with 'S'
To avoid conflicts with symbols defined by dependent packages
all debugging symbols have been prefixed with a 'S' for SPL.
Any dependent package needing to integrate with the SPL debug
should include the spl-debug.h header and use the 'S' prefixed
macros.  They must also build with DEBUG defined.
2010-07-20 13:30:40 -07:00
Brian Behlendorf 55abb0929e Split <sys/debug.h> header
To avoid symbol conflicts with dependent packages the debug
header must be split in to several parts.  The <sys/debug.h>
header now only contains the Solaris macro's such as ASSERT
and VERIFY.  The spl-debug.h header contain the spl specific
debugging infrastructure and should be included by any package
which needs to use the spl logging.  Finally the spl-trace.h
header contains internal data structures only used for the log
facility and should not be included by anythign by spl-debug.c.

This way dependent packages can include the standard Solaris
headers without picking up any SPL debug macros.  However, if
the dependant package want to integrate with the SPL debugging
subsystem they can then explicitly include spl-debug.h.

Along with this change I have dropped the CHECK_STACK macros
because the upstream Linux kernel now has much better stack
depth checking built in and we don't need this complexity.

Additionally SBUG has been replaced with PANIC and provided as
part of the Solaris macro set.  While the Solaris version is
really panic() that conflicts with the Linux kernel so we'll
just have to make due to PANIC.  It should rarely be called
directly, the prefered usage would be an ASSERT or VERIFY.

There's lots of change here but this cleanup was overdue.
2010-07-20 13:29:35 -07:00
Brian Behlendorf e6de04b73c Add kmem_vasprintf function
We might as well have both asprintf() variants.  This allows us
to safely pass a va_list through several levels of the stack
using va_copy() instead of va_start().
2010-06-24 09:41:59 -07:00
Brian Behlendorf 3cb77549d1 Update warnings in kmem debug code
This fix was long overdue.  Most of the ground work was laid long
ago to include the exact function and line number in the error message
which there was an issue with a memory allocation call.  However,
probably due to lack of time at the moment that informatin never
made it in to the error message.  This patch fixes that and trys
to standardize the kmem debug messages as well.
2010-06-16 16:01:16 -07:00
Brian Behlendorf b868e22f05 Add kmem_asprintf(), strfree(), strdup(), and minor cleanup.
This patch adds three missing Solaris functions: kmem_asprintf(), strfree(),
and strdup().  They are all implemented as a thin layer which just calls
their Linux counterparts.  As part of this an autoconf check for kvasprintf
was added because it does not appear in older kernels.  If the kernel does
not provide it then spl-generic implements it.

Additionally the dead DEBUG_KMEM_UNIMPLEMENTED code was removed to clean
things up and make the kmem.h a little more readable.
2010-06-11 15:57:25 -07:00
Brian Behlendorf 23d91792ef Use KM_NODEBUG macro in preference to __GFP_NOWARN. 2010-05-20 14:16:59 -07:00
Brian Behlendorf 5198ea0e71 Remove kmem_set_warning() interface replace with __GFP_NOWARN flag.
Remove the kmem_set_warning() hack used by the kmem-splat regression
tests with a per-allocation flag called __GFP_NOWARN.  This matches
the lower level linux flag of similar by slightly different function.
The idea is you can then explicitly set this flag on requests where
you know your breaking the max 8k rule but you need/want to do it
anyway.

This is currently used by the regression tests where we intentionally
push things to the limit but don't want the log noise.  Additionally,
we are forced to use it in spl_kmem_cache_create() because by default
NR_CPUS is very large and theres no easy way to handle that.

Finally, I've added a stack_dump() call to the warning when it is
trigger to make to clear exactly where the allocation is taking place.
2010-05-19 16:53:13 -07:00
Brian Behlendorf 716154c592 Public Release Prep
Updated AUTHORS, COPYING, DISCLAIMER, and INSTALL files.  Added
standardized headers to all source file to clearly indicate the
copyright, license, and to give credit where credit is due.
2010-05-17 15:18:00 -07:00
Brian Behlendorf aa600d8a38 Reduce max kmem based slab size
Allowing MAX_ORDER-1 sized allocations for kmem based slabs have
been observed to result in deadlocks.  To help prvent this limit
max kmem based slab size to MAX_ORDER-3.  Just for the record
callers should not be creating slabs like this, but if they do
we should still handle it as safely as we can.
2010-03-18 13:39:51 -07:00
Brian Behlendorf ef1c7a0691 Strip __GFP_ZERO from kmalloc it is not available for older kernels.
This is needed to avoid a BUG_ON() on RHEL5.4 kernel 2.6.18-164.6.1,
since __GFP_ZERO is not a valid flag for kmalloc().
2009-12-23 12:57:10 -08:00
Brian Behlendorf d04c8a563c Atomic64 compatibility for 32-bit systems without kernel support.
This patch is another step towards updating the code to handle the
32-bit kernels which I have not been regularly testing.  This changes
do not really impact the common case I'm expected which is the latest
kernel running on an x86_64 arch.

Until the linux-2.6.31 kernel the x86 arch did not have support for
64-bit atomic operations.  Additionally, the new atomic_compat.h support
for this case was wrong because it embedded a spinlock in the atomic
variable which must always and only be 64-bits total.  To handle these
32-bit issues we now simply fall back to the --enable-atomic-spinlock
implementation if the kernel does not provide the 64-bit atomic funcs.

The second issue this patch addresses is the DEBUG_KMEM assumption that
there will always be atomic64 funcs available.  On 32-bit archs this may
not be true, and actually that's just fine.  In that case the kernel will
will never be able to allocate more the 32-bits worth anyway.  So just
check if atomic64 funcs are available, if they are not it means this
is a 32-bit machine and we can safely use atomic_t's instead.
2009-12-04 15:54:12 -08:00
Brian Behlendorf 8b45dda2bc Linux 2.6.31 kmem cache alignment fixes and cleanup.
The big fix here is the removal of kmalloc() in kv_alloc().  It used
to be true in previous kernels that kmallocs over PAGE_SIZE would
always be pages aligned.  This is no longer true atleast in 2.6.31
there are no longer any alignment expectations.  Since kv_alloc()
requires the resulting address to be page align we no only either
directly allocate pages in the KMC_KMEM case, or directly call
__vmalloc() both of which will always return a page aligned address.
Additionally, to avoid wasting memory size is always a power of two.

As for cleanup several helper functions were introduced to calculate
the aligned sizes of various data structures.  This helps ensure no
case is accidentally missed where the alignment needs to be taken in
to account.  The helpers now use P2ROUNDUP_TYPE instead of P2ROUNDUP
which is safer since the type will be explict and we no longer count
on the compiler to auto promote types hopefully as we expected.

Always wnforce minimum (SPL_KMEM_CACHE_ALIGN) and maximum (PAGE_SIZE)
alignment restrictions at cache creation time.

Use SPL_KMEM_CACHE_ALIGN in splat alignment test.
2009-11-13 11:12:43 -08:00
Brian Behlendorf c89fdee4d3 Remove __GFP_NOFAIL in kmem and retry internally.
As of 2.6.31 it's clear __GFP_NOFAIL should no longer be used and it
may disappear from the kernel at any time.  To handle this I have simply
added *_nofail wrappers in the kmem implementation which perform the
retry for non-atomic allocations.

From linux-2.6.31 mm/page_alloc.c:1166
/*
 * __GFP_NOFAIL is not to be used in new code.
 *
 * All __GFP_NOFAIL callers should be fixed so that they
 * properly detect and handle allocation failures.
 *
 * We most definitely don't want callers attempting to
 * allocate greater than order-1 page units with
 * __GFP_NOFAIL.
 */
WARN_ON_ONCE(order > 1);
2009-11-12 15:11:24 -08:00
Brian Behlendorf baf2979ed3 Linux 2.6.31 Compatibility Updates
SPL_AC_2ARGS_SET_FS_PWD macro updated to explicitly include
linux/fs_struct.h which was dropped from linux/sched.h.

min_wmark_pages, low_wmark_pages, high_wmark_pages macros
introduced in newer kernels.  For older kernels mm_compat.h
was introduced to define them as needed as direct mappings
to per zone min_pages, low_pages, max_pages.
2009-11-10 14:06:57 -08:00
Brian Behlendorf 055ffd98cf Autoconf --enable-debug-* cleanup
Cleanup the --enable-debug-* configure options, this has been pending
for quite some time and I am glad I finally got to it.  To summerize:

1) All SPL_AC_DEBUG_* macros were updated to be a more autoconf
friendly.  This mainly involved shift to the GNU approved usage of
AC_ARG_ENABLE and ensuring AS_IF is used rather than directly using
an if [ test ] construct.

2) --enable-debug-kmem=yes by default.  This simply enabled keeping
a running tally of total memory allocated and freed and reporting a
memory leak if there was one at module unload.  Additionally, it
ensure /proc/spl/kmem/slab will exist by default which is handy.
The overhead is low for this and it should not impact performance.

3) --enable-debug-kmem-tracking=no by default.  This option was added
to provide a configure option to enable to detailed memory allocation
tracking.  This support was always there but you had to know where to
turn it on.  By default this support is disabled because it is known
to badly hurt performence, however it is invaluable when chasing a
memory leak.

4) --enable-debug-kstat removed.  After further reflection I can't see
why you would ever really want to turn this support off.  It is now
always on which had the nice side effect of simplifying the proc handling
code in spl-proc.c.  We can now always assume the top level directory
will be there.

5) --enable-debug-callb removed.  This never really did anything, it was
put in provisionally because it might have been needed.  It turns out
it was not so I am just removing it to prevent confusion.
2009-10-30 13:58:51 -07:00
Brian Behlendorf 6ae7fef5b9 Update global_page_state() support for 2.6.29 kernels.
Basically everything we need to monitor the global memory state of
the system is now cleanly available via global_page_state().  The
problem is that this interface is still fairly recent, and there
has been one change in the page state enum which we need to handle.
These changes basically boil down to the following:
- If global_page_state() is available we should use it.  Several
  autoconf checks have been added to detect the correct enum names.
- If global_page_state() is not available check to see if
  get_zone_counts() symbol is available and use that.
- If the get_zone_counts() symbol is not exported we have no choice
  be to dynamically aquire it at load time.  This is an absolute
  last resort for old kernel which we don't want to patch to
  cleanly export the symbol.
2009-07-28 15:06:42 -07:00
Brian Behlendorf 124ca8a5a9 SLES10 Fixes (part 7)
- Initial SLES testing uncovered a long standing bug in the debug
  tracing.  The tcd_for_each() macro expected a NULL to terminate
  the trace_data[i] array but this was only ever true due to luck.
  All trace_data[] iterators are now properly capped by TCD_TYPE_MAX.
- SPLAT_MAJOR 229 conflicted with a 'hvc' device on my SLES system.
  Since this was always an arbitrary choice I picked something else.
- The HAVE_PGDAT_LIST case should set pgdat_list_addr to the value stored
  at the address of the memory location returned by kallsyms_lookup_name().
2009-05-20 15:30:13 -07:00
Brian Behlendorf 5232d256b4 SLES10 Fixes (part 6)
- Prior to 2.6.17 there were no *_pgdat helper functions in mm/mmzone.c.
  Instead for_each_zone() operated directly on pgdat_list which may or
  may not have been exported depending on how your kernel was compiled.
  Now new configure checks determine if you have the helpers or not, and
  if the needed symbols are exported.  If they are not exported then they
  are dynamically aquired at runtime by kallsyms_lookup_name().
2009-05-20 14:23:13 -07:00
Brian Behlendorf 96dded3844 SLES10 Fixes (part 2):
- Configure check, the div64_64() function was renamed to
  div64_u64() as of 2.6.26.
- Configure check, the global_page_state() fuction was introduced
  in 2.6.18 kernels.  The earlier 2.6.16 based SLES10 must not try
  and use it, thankfully get_zone_counts() is still available.
- To simplify debugging poison all symbols aquired dynamically
  using spl_kallsyms_lookup_name() with SYMBOL_POISON.
- Add console messages when the user mode helpers fail.
- spl_kmem_init_globals() use bit shifts instead of division.
- When the monotonic clock is unavailable __gethrtime() must perform
  the HZ division as an 'unsigned long long' because the SPL only
  implements __udivdi3(), and not __divdi3() for 'long long' division
  on 32-bit arches.
2009-05-20 10:08:37 -07:00
Brian Behlendorf e11d6c5f50 FC10/i686 Compatibility Update (2.6.27.19-170.2.35.fc10.i686)
In the interests of portability I have added a FC10/i686 box to
my list of development platforms.  The hope is this will allow me
to keep current with upstream kernel API changes, and at the same
time ensure I don't accidentally break x86 support.  This patch
resolves all remaining issues observed under that environment.

1) SPL_AC_ZONE_STAT_ITEM_FIA autoconf check added.  As of 2.6.21
the kernel added a clean API for modules to get the global count
for free, inactive, and active pages.  The SPL attempts to detect
if this API is available and directly map spl_global_page_state()
to global_page_state().  If the full API is not available then
spl_global_page_state() is implemented as a thin layer to get
these values via get_zone_counts() if that symbol is available.

2) New kmem:vmem_size regression test added to validate correct
vmem_size() functionality.  The test case acquires the current
global vmem state, allocates from the vmem region, then verifies
the allocation is correctly reflected in the vmem_size() stats.

3) Change splat_kmem_cache_thread_test() to always use KMC_KMEM
based memory.  On x86 systems with limited virtual address space
failures resulted due to exhaustig the address space.  The tests
really need to problem exhausting all memory on the system thus
we need to use the physical address space.

4) Change kmem:slab_lock to cap it's memory usage at availrmem
instead of using the native linux nr_free_pages().  This provides
additional test coverage of the SPL Linux VM integration.

5) Change kmem:slab_overcommit to perform allocation of 256K
instead of 1M.  On x86 based systems it is not possible to create
a kmem backed slab with entires of that size.  To compensate for
this the number of allocations performed in increased by 4x.

6) Additional autoconf documentation for proposed upstream API
changes to make additional symbols available to modules.

7) Console error messages added when spl_kallsyms_lookup_name()
fails to locate an expected symbol.  This causes the module to fail
to load and we need to know exactly which symbol was not available.
2009-03-17 12:16:31 -07:00
Brian Behlendorf c5f704607b Build system and packaging (RPM support)
An update to the build system to properly support all commonly
used Makefile targets these include:

  make all        # Build everything
  make install    # Install everything
  make clean	  # Clean up build products
  make distclean  # Clean up everything
  make dist       # Create package tarball
  make srpm       # Create package source RPM
  make rpm        # Create package binary RPMs
  make tags       # Create ctags and etags for everything

Extra care was taken to ensure that the source RPMs are fully
rebuildable against Fedora/RHEL/Chaos kernels.  To build binary
RPMs from the source RPM for your system simply run:

  rpmbuild --rebuild spl-x.y.z-1.src.rpm

This will produce two binary RPMs with correct 'requires'
dependencies for your kernel.  One will contain all spl modules
and support utilities, the other is a devel package for compiling
additional kernel modules which are dependant on the spl.

  spl-x.y.z-1_<kernel version>.x86_64.rpm
  spl-devel-x.y.2-1_<kernel version>.x86_64.rpm
2009-03-09 15:56:55 -07:00
Ricardo M. Correia 32f74c5280 XXX: Temporarily disable vmem_size(). 2009-03-05 10:13:59 -08:00
Brian Behlendorf d1ff2312b0 Linux VM Integration Cleanup
Remove all instances of functions being reimplemented in the SPL.
When the prototypes are available in the linux headers but the
function address itself is not exported use kallsyms_lookup_name()
to find the address.  The function name itself can them become a
define which calls a function pointer.  This is preferable to
reimplementing the function in the SPL because it ensures we get
the correct version of the function for the running kernel.  This
is actually pretty safe because the prototype is defined in the
headers so we know we are calling the function properly.

This patch also includes a rhel5 kernel patch we exports the needed
symbols so we don't need to use kallsyms_lookup_name().  There are
autoconf checks to detect if the symbol is exported and if so to
use it directly.  We should add patches for stock upstream kernels
as needed if for no other reason than so we can easily track which
additional symbols we needed exported.  Those patches can also be
used by anyone willing to rebuild their kernel, but this should
not be a requirement.  The rhel5 version of the export-symbols
patch has been applied to the chaos kernel.

Additional fixes:
1) Implement vmem_size() function using get_vmalloc_info()
2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead
   of $LINUX because Module.symvers is a build product.  When
   $LINUX_OBJ != $LINUX we will not properly detect exported symbols.
3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and
   $LINUX/include search paths to allow proper compilation when
   the kernel target build directory is not the source directory.
2009-03-04 10:04:15 -08:00
Brian Behlendorf 9b1b8e4c24 kmem slab magazine ageing deadlock
- The previous magazine ageing sceme relied on the on_each_cpu()
  function to call spl_magazine_age() on each cpu.  It turns out
  this could deadlock with do_flush_tlb_all() which also relies
  on the IPI based on_each_cpu().  To avoid this problem a per-
  magazine delayed work item is created and indepentantly
  scheduled to the correct cpu removing the need for on_each_cpu().
- Additionally two unused fields were removed from the type
  spl_kmem_cache_t, they were hold overs from previous cleanup.
    - struct work_struct work
    - struct timer_list timer
2009-02-17 15:52:18 -08:00
Brian Behlendorf 1a944a7d0b kmem slab fixes
- spl_slab_reclaim() 'continue' changed back to 'break' from commit
  37db7d8cf9.  The original was correct,
  I have added a comment to ensure this does not happen again.
- spl_slab_reclaim() further optimized by moving the destructor call
  in spl_slab_free() outside the skc->skc_lock.  This minimizes the
  length of time the spin lock is held, allows the destructors to
  be invoked concurrently for different objects, and as a bonus makes
  it safe (although unwise) to sleep in the destructors.
2009-02-13 10:28:55 -08:00