Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/lib/libspl/Makefile.am

58 lines
939 B
Makefile
Raw Normal View History

Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
include $(top_srcdir)/config/Rules.am
Unify target_cpu handling Over the years several slightly different approaches were used in the Makefiles to determine the target architecture. This change updates both the build system and Makefile to handle this in a consistent fashion. TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64 and made available in the Makefiles to be used as appropriate. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9848
2020-01-17 20:40:09 +00:00
if TARGET_CPU_I386
Fix libspl/asm-generic/atomic for VPATH build Currently, asm-generic/atomic.c is compiled into a .S file, with a comment saying this is to simplify the upper-level Makefile. However, this doesn't work properly with a VPATH build, which would require better logic to deal with generated sources correctly. It also doesn't seem more complex to just specify the .c/.S source file, depending on the cpu, instead of only the source directory in lib/libspl/Makefile.am, which eliminates the need to do the intermediate compilation. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-19 19:24:20 +00:00
TARGET_CPU_ATOMIC_SOURCE = asm-i386/atomic.S
Unify target_cpu handling Over the years several slightly different approaches were used in the Makefiles to determine the target architecture. This change updates both the build system and Makefile to handle this in a consistent fashion. TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64 and made available in the Makefiles to be used as appropriate. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9848
2020-01-17 20:40:09 +00:00
else
if TARGET_CPU_X86_64
Fix libspl/asm-generic/atomic for VPATH build Currently, asm-generic/atomic.c is compiled into a .S file, with a comment saying this is to simplify the upper-level Makefile. However, this doesn't work properly with a VPATH build, which would require better logic to deal with generated sources correctly. It also doesn't seem more complex to just specify the .c/.S source file, depending on the cpu, instead of only the source directory in lib/libspl/Makefile.am, which eliminates the need to do the intermediate compilation. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-19 19:24:20 +00:00
TARGET_CPU_ATOMIC_SOURCE = asm-x86_64/atomic.S
Unify target_cpu handling Over the years several slightly different approaches were used in the Makefiles to determine the target architecture. This change updates both the build system and Makefile to handle this in a consistent fashion. TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64 and made available in the Makefiles to be used as appropriate. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9848
2020-01-17 20:40:09 +00:00
else
Fix libspl/asm-generic/atomic for VPATH build Currently, asm-generic/atomic.c is compiled into a .S file, with a comment saying this is to simplify the upper-level Makefile. However, this doesn't work properly with a VPATH build, which would require better logic to deal with generated sources correctly. It also doesn't seem more complex to just specify the .c/.S source file, depending on the cpu, instead of only the source directory in lib/libspl/Makefile.am, which eliminates the need to do the intermediate compilation. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-19 19:24:20 +00:00
TARGET_CPU_ATOMIC_SOURCE = asm-generic/atomic.c
Unify target_cpu handling Over the years several slightly different approaches were used in the Makefiles to determine the target architecture. This change updates both the build system and Makefile to handle this in a consistent fashion. TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64 and made available in the Makefiles to be used as appropriate. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9848
2020-01-17 20:40:09 +00:00
endif
endif
Fix libspl/asm-generic/atomic for VPATH build Currently, asm-generic/atomic.c is compiled into a .S file, with a comment saying this is to simplify the upper-level Makefile. However, this doesn't work properly with a VPATH build, which would require better logic to deal with generated sources correctly. It also doesn't seem more complex to just specify the .c/.S source file, depending on the cpu, instead of only the source directory in lib/libspl/Makefile.am, which eliminates the need to do the intermediate compilation. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-19 19:24:20 +00:00
SUBDIRS = include
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
AM_CCASFLAGS = \
Fix libspl assembler flags to respect cpu type It's important to respect the user's CFLAGS as mismatched -mcpu will directly result in the assembler not able to produce correct code. Fixes #6733. Signed-off-by: Pengcheng Xu <i@jsteward.moe>
2017-10-11 05:36:26 +00:00
$(CFLAGS)
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
Move libspl_assertf into .c file Variadic functions cannot be inlined. libspl_assertf ends up being duplicated in every file that uses it. Fix this by moving the function into a new assert.c. Also move the definition of aok into the new file instead of zone.c. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10538
2020-07-04 22:24:13 +00:00
noinst_LTLIBRARIES = libspl_assert.la libspl.la
libspl_assert_la_SOURCES = \
assert.c
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
USER_C = \
list.c \
mkdirp.c \
ABD optimized page allocation code * Convert ABD to use the Linux Kernel scatterlist implementation instead of the hand rolled one from illumos. * Scatter ABDs are preferentially populated with higher order compound pages from a single zone. Allocation size is progressively decreased until it can be satisfied without performing reclaim or compaction. * An alternate page allocator is provided for kernels older than 3.6 and for CONFIG_HIGHMEM systems. This allocator is designed as a fallback for maximum compatibility. * Extended abdstats to provide visibility in the the allocator. * Add cached value for PAGESIZE in userspace. Contributions-by: Chunwei Chen <david.chen@osnexus.com> Gvozden Neskovic <neskovic@gmail.com> Jinshan Xiong <jinshan.xiong@intel.com> Isaac Huang <he.huang@intel.com> David Quigley <david.quigley@intel.com> Brian Behlendorf <behlendorf1@llnl.gov>
2016-10-26 04:32:23 +00:00
page.c \
Check for strlcat and strlcpy This partially reverts commit 8005ca4 by moving the strlcat() and strlcpy() compatibility implementations back to their original location. In addition, these two functions were added to the AC_CHECK_FUNCS macro. When these functions are available from the C library, HAVE_STRLCAT and HAVE_STRLCPY will be defined and library version used. Otherwise the compatibility version is built. Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Reviewed-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8157 Closes #8202
2018-12-12 00:01:41 +00:00
strlcat.c \
strlcpy.c \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
timestamp.c \
include/sys/list.h \
include/sys/list_impl.h
OpenZFS restructuring - libspl Factor Linux specific pieces out of libspl. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9336
2019-10-02 17:39:48 +00:00
if BUILD_LINUX
USER_C += \
os/linux/getexecname.c \
os/linux/gethostid.c \
libspl: Provide platform-specific zone implementations FreeBSD has the concept of jails, a precursor to Solaris's zones, which can be mapped to the required zones interface with relative ease. The previous ZFS implementation in FreeBSD did so, and we should continue to provide an appropriate implementation in OpenZFS as well. Move lib/libspl/zone.c into platform code and adopt the correct implementation for FreeBSD. While here, prune unused code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #10851
2020-08-30 17:37:44 +00:00
os/linux/getmntany.c \
os/linux/zone.c
OpenZFS restructuring - libspl Factor Linux specific pieces out of libspl. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9336
2019-10-02 17:39:48 +00:00
endif
Add FreeBSD support to OpenZFS Add the FreeBSD platform code to the OpenZFS repository. As of this commit the source can be compiled and tested on FreeBSD 11 and 12. Subsequent commits are now required to compile on FreeBSD and Linux. Additionally, they must pass the ZFS Test Suite on FreeBSD which is being run by the CI. As of this commit 1230 tests pass on FreeBSD and there are no unexpected failures. Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #898 Closes #8987
2020-04-14 18:36:28 +00:00
if BUILD_FREEBSD
USER_C += \
os/freebsd/getexecname.c \
os/freebsd/gethostid.c \
os/freebsd/getmntany.c \
libspl: Provide platform-specific zone implementations FreeBSD has the concept of jails, a precursor to Solaris's zones, which can be mapped to the required zones interface with relative ease. The previous ZFS implementation in FreeBSD did so, and we should continue to provide an appropriate implementation in OpenZFS as well. Move lib/libspl/zone.c into platform code and adopt the correct implementation for FreeBSD. While here, prune unused code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #10851
2020-08-30 17:37:44 +00:00
os/freebsd/mnttab.c \
os/freebsd/zone.c
Add FreeBSD support to OpenZFS Add the FreeBSD platform code to the OpenZFS repository. As of this commit the source can be compiled and tested on FreeBSD 11 and 12. Subsequent commits are now required to compile on FreeBSD and Linux. Additionally, they must pass the ZFS Test Suite on FreeBSD which is being run by the CI. As of this commit 1230 tests pass on FreeBSD and there are no unexpected failures. Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #898 Closes #8987
2020-04-14 18:36:28 +00:00
endif
Fixes for make dist Reduce the usage of EXTRA_DIST. If files are conditionally included in _SOURCES, _HEADERS etc, automake is smart enough to dist all files that could possibly be included, but this does not apply to EXTRA_DIST, resulting in make dist depending on the configuration. Add some files that were missing altogether in various Makefile's. The changes to disted files in this commit (excluding deleted files): +./cmd/zed/agents/README.md +./etc/init.d/README.md +./lib/libspl/os/freebsd/getexecname.c +./lib/libspl/os/freebsd/gethostid.c +./lib/libspl/os/freebsd/getmntany.c +./lib/libspl/os/freebsd/mnttab.c -./lib/libzfs/libzfs_core.pc -./lib/libzfs/libzfs.pc +./lib/libzfs/os/freebsd/libzfs_compat.c +./lib/libzfs/os/freebsd/libzfs_fsshare.c +./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c +./lib/libzfs/os/freebsd/libzfs_zmount.c +./lib/libzutil/os/freebsd/zutil_compat.c +./lib/libzutil/os/freebsd/zutil_device_path_os.c +./lib/libzutil/os/freebsd/zutil_import_os.c +./module/lua/README.zfs +./module/os/linux/spl/README.md +./tests/README.md +./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh +./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh +./tests/zfs-tests/tests/functional/inheritance/README.config +./tests/zfs-tests/tests/functional/inheritance/README.state +./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh +./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10501
2020-06-25 18:14:54 +00:00
libspl_la_SOURCES = \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
$(USER_C) \
Fix libspl/asm-generic/atomic for VPATH build Currently, asm-generic/atomic.c is compiled into a .S file, with a comment saying this is to simplify the upper-level Makefile. However, this doesn't work properly with a VPATH build, which would require better logic to deal with generated sources correctly. It also doesn't seem more complex to just specify the .c/.S source file, depending on the cpu, instead of only the source directory in lib/libspl/Makefile.am, which eliminates the need to do the intermediate compilation. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-19 19:24:20 +00:00
$(TARGET_CPU_ATOMIC_SOURCE)
Add proper library versioning The zfs libraries were never properly versioned. Since the API has remained static for quite some time this we never an issue. However, going forward they should be versioned. This commit versions all of the libraries to 1.0.0. From here on out this version must be updated to reflect changes to the library.
2011-07-05 19:12:08 +00:00
Move libspl_assertf into .c file Variadic functions cannot be inlined. libspl_assertf ends up being duplicated in every file that uses it. Fix this by moving the function into a new assert.c. Also move the definition of aok into the new file instead of zone.c. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10538
2020-07-04 22:24:13 +00:00
libspl_la_LIBADD = \
libspl_assert.la
Clean up lib dependencies libzutil is currently statically linked into libzfs, libzfs_core and libzpool. Avoid the unnecessary duplication by removing it from libzfs and libzpool, and adding libzfs_core to libzpool. Remove a few unnecessary dependencies: - libuutil from libzfs_core - libtirpc from libspl - keep only libcrypto in libzfs, as we don't use any functions from libssl - librt is only used for clock_gettime, however on modern systems that's in libc rather than librt. Add a configure check to see if we actually need librt - libdl from raidz_test Add a few missing dependencies: - zlib to libefi and libzfs - libuuid to zpool, and libuuid and libudev to zed - libnvpair uses assertions, so add assert.c to provide aok and libspl_assertf Sort the LDADD for programs so that libraries that satisfy dependencies come at the end rather than the beginning of the linker command line. Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY instead. This can take advantage of pkg-config, and it also avoids polluting LIBS. List all the required dependencies in the pkgconfig files, and move the one for libzfs_core into the latter's directory. Install pkgconfig files in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on FreeBSD, instead of /usr/share/pkgconfig, as the more correct location for library .pc files. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10538
2020-06-30 17:10:41 +00:00
libspl_la_LIBADD += $(LIBCLOCK_GETTIME)