Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/lib/libspl/Makefile.am

54 lines
844 B
Makefile
Raw Normal View History

Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
include $(top_srcdir)/config/Rules.am
Unify target_cpu handling Over the years several slightly different approaches were used in the Makefiles to determine the target architecture. This change updates both the build system and Makefile to handle this in a consistent fashion. TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64 and made available in the Makefiles to be used as appropriate. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9848
2020-01-17 20:40:09 +00:00
if TARGET_CPU_I386
TARGET_CPU_DIR = asm-i386
else
if TARGET_CPU_X86_64
TARGET_CPU_DIR = asm-x86_64
else
TARGET_CPU_DIR = asm-generic
endif
endif
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
VPATH = \
$(top_srcdir)/lib/libspl \
Unify target_cpu handling Over the years several slightly different approaches were used in the Makefiles to determine the target architecture. This change updates both the build system and Makefile to handle this in a consistent fashion. TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64 and made available in the Makefiles to be used as appropriate. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9848
2020-01-17 20:40:09 +00:00
$(top_srcdir)/lib/libspl/$(TARGET_CPU_DIR)
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
Unify target_cpu handling Over the years several slightly different approaches were used in the Makefiles to determine the target architecture. This change updates both the build system and Makefile to handle this in a consistent fashion. TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64 and made available in the Makefiles to be used as appropriate. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9848
2020-01-17 20:40:09 +00:00
SUBDIRS = include $(TARGET_CPU_DIR)
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
DIST_SUBDIRS = include asm-generic asm-i386 asm-x86_64
config: better libtirpc detection Improve the autoconf code for finding libtirpc and do not assume the headers are in /usr/include/tirpc. Also remove this assumption from the `rpc/xdr.h` header in libspl and use the same `#include_next` mechanism that is used for other libspl headers. Include pkg.m4 from pkg-config in config/ for PKG_CHECK_MODULES(), the file license allows this. Include ax_save_flags.m4 and ax_restore_flags.m4 from autoconf-archive, the file licenses are compatible. Use the 2012 versions so as not rely on a more recent autoconf feature AS_VAR_COPY(), which breaks some build slaves. Add new macro library `config/find_system_library.m4` which defines the FIND_SYSTEM_LIBRARY() macro which is a convenience wrapper over using PKG_CHECK_MODULES() with a fallback to standard library locations and some sanity checks. The parameters are: ``` FIND_SYSTEM_LIBRARY(VARIABLE-PREFIX, MODULE, HEADER, HEADER-PREFIXES, LIBRARY, FUNCTIONS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) ``` `HEADER-PREFIXES` and `FUNCTIONS` are comma-separated m4 lists. For libtirpc we are using: ``` FIND_SYSTEM_LIBRARY(LIBTIRPC, [libtirpc], [rpc/xdr.h], [tirpc], [tirpc], [xdrmem_create], [], [...]) ``` The headers are first checked for without the prefixes and then with. This system works with pkg-config and falls back on checking standard header/library locations, it can be easily overridden by the user by setting the `PREFIX_CFLAGS` and `PREFIX_LIBS` variables which are automatically added to the `./configure --help` output. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rafael Kitover <rkitover@gmail.com> Closes #7422 Closes #8313
2019-03-03 00:19:05 +00:00
AM_CFLAGS += $(LIBTIRPC_CFLAGS)
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
AM_CCASFLAGS = \
Fix libspl assembler flags to respect cpu type It's important to respect the user's CFLAGS as mismatched -mcpu will directly result in the assembler not able to produce correct code. Fixes #6733. Signed-off-by: Pengcheng Xu <i@jsteward.moe>
2017-10-11 05:36:26 +00:00
$(CFLAGS)
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
Combine libraries: spl, avl, efi, share, unicode. These libraries, which are an artifact of the ZoL development process, conflict with packages that are already in distribution: * libspl: SPL Programming Language * libavl: AVL for Linux * libefi: GRUB And these libraries are potential conflicts: * libshare: the Linux Mount Manager * libunicode: Perl and Python Recompose these five ZoL components into the four libraries that are conventionally provided by Solaris and FreeBSD systems: + libnvpair + libuutil + libzpool + libzfs This change resolves the name conflict, makes ZoL more compatible with existing software that uses autotools to detect ZFS, and allows pkg-zfs to better reflect the official Debian kFreeBSD packaging. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #430
2011-12-31 23:30:52 +00:00
noinst_LTLIBRARIES = libspl.la
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
USER_C = \
list.c \
mkdirp.c \
ABD optimized page allocation code * Convert ABD to use the Linux Kernel scatterlist implementation instead of the hand rolled one from illumos. * Scatter ABDs are preferentially populated with higher order compound pages from a single zone. Allocation size is progressively decreased until it can be satisfied without performing reclaim or compaction. * An alternate page allocator is provided for kernels older than 3.6 and for CONFIG_HIGHMEM systems. This allocator is designed as a fallback for maximum compatibility. * Extended abdstats to provide visibility in the the allocator. * Add cached value for PAGESIZE in userspace. Contributions-by: Chunwei Chen <david.chen@osnexus.com> Gvozden Neskovic <neskovic@gmail.com> Jinshan Xiong <jinshan.xiong@intel.com> Isaac Huang <he.huang@intel.com> David Quigley <david.quigley@intel.com> Brian Behlendorf <behlendorf1@llnl.gov>
2016-10-26 04:32:23 +00:00
page.c \
Check for strlcat and strlcpy This partially reverts commit 8005ca4 by moving the strlcat() and strlcpy() compatibility implementations back to their original location. In addition, these two functions were added to the AC_CHECK_FUNCS macro. When these functions are available from the C library, HAVE_STRLCAT and HAVE_STRLCPY will be defined and library version used. Otherwise the compatibility version is built. Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Reviewed-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8157 Closes #8202
2018-12-12 00:01:41 +00:00
strlcat.c \
strlcpy.c \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
timestamp.c \
zone.c \
include/sys/list.h \
include/sys/list_impl.h
OpenZFS restructuring - libspl Factor Linux specific pieces out of libspl. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9336
2019-10-02 17:39:48 +00:00
if BUILD_LINUX
USER_C += \
os/linux/getexecname.c \
os/linux/gethostid.c \
os/linux/getmntany.c
endif
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
USER_ASM = atomic.S
nodist_libspl_la_SOURCES = \
$(USER_C) \
Support -fsanitize=address with --enable-asan When --enable-asan is provided to configure then build all user space components with fsanitize=address. For kernel support use the Linux KASAN feature instead. https://github.com/google/sanitizers/wiki/AddressSanitizer When using gcc version 4.8 any test case which intentionally generates a core dump will fail when using --enable-asan. The default behavior is to disable core dumps and only newer versions allow this behavior to be controled at run time with the ASAN_OPTIONS environment variable. Additionally, this patch includes some build system cleanup. * Rules.am updated to set the minimum AM_CFLAGS, AM_CPPFLAGS, and AM_LDFLAGS. Any additional flags should be added on a per-Makefile basic. The --enable-debug and --enable-asan options apply to all user space binaries and libraries. * Compiler checks consolidated in always-compiler-options.m4 and renamed for consistency. * -fstack-check compiler flag was removed, this functionality is provided by asan when configured with --enable-asan. * Split DEBUG_CFLAGS in to DEBUG_CFLAGS, DEBUG_CPPFLAGS, and DEBUG_LDFLAGS. * Moved default kernel build flags in to module/Makefile.in and split in to ZFS_MODULE_CFLAGS and ZFS_MODULE_CPPFLAGS. These flags are set with the standard ccflags-y kbuild mechanism. * -Wframe-larger-than checks applied only to binaries or libraries which include source files which are built in both user space and kernel space. This restriction is relaxed for user space only utilities. * -Wno-unused-but-set-variable applied only to libzfs and libzpool. The remaining warnings are the result of an ASSERT using a variable when is always declared. * -D_POSIX_PTHREAD_SEMANTICS and -D__EXTENSIONS__ dropped because they are Solaris specific and thus not needed. * Ensure $GDB is defined as gdb by default in zloop.sh. Signed-off-by: DHE <git@dehacked.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7027
2018-01-10 18:49:27 +00:00
$(USER_ASM)
Add proper library versioning The zfs libraries were never properly versioned. Since the API has remained static for quite some time this we never an issue. However, going forward they should be versioned. This commit versions all of the libraries to 1.0.0. From here on out this version must be updated to reflect changes to the library.
2011-07-05 19:12:08 +00:00
config: better libtirpc detection Improve the autoconf code for finding libtirpc and do not assume the headers are in /usr/include/tirpc. Also remove this assumption from the `rpc/xdr.h` header in libspl and use the same `#include_next` mechanism that is used for other libspl headers. Include pkg.m4 from pkg-config in config/ for PKG_CHECK_MODULES(), the file license allows this. Include ax_save_flags.m4 and ax_restore_flags.m4 from autoconf-archive, the file licenses are compatible. Use the 2012 versions so as not rely on a more recent autoconf feature AS_VAR_COPY(), which breaks some build slaves. Add new macro library `config/find_system_library.m4` which defines the FIND_SYSTEM_LIBRARY() macro which is a convenience wrapper over using PKG_CHECK_MODULES() with a fallback to standard library locations and some sanity checks. The parameters are: ``` FIND_SYSTEM_LIBRARY(VARIABLE-PREFIX, MODULE, HEADER, HEADER-PREFIXES, LIBRARY, FUNCTIONS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) ``` `HEADER-PREFIXES` and `FUNCTIONS` are comma-separated m4 lists. For libtirpc we are using: ``` FIND_SYSTEM_LIBRARY(LIBTIRPC, [libtirpc], [rpc/xdr.h], [tirpc], [tirpc], [xdrmem_create], [], [...]) ``` The headers are first checked for without the prefixes and then with. This system works with pkg-config and falls back on checking standard header/library locations, it can be easily overridden by the user by setting the `PREFIX_CFLAGS` and `PREFIX_LIBS` variables which are automatically added to the `./configure --help` output. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rafael Kitover <rkitover@gmail.com> Closes #7422 Closes #8313
2019-03-03 00:19:05 +00:00
libspl_la_LIBADD = -lrt $(LIBTIRPC_LIBS)
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
EXTRA_DIST = $(USER_C)