Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/include/linux/vfs_compat.h

647 lines
15 KiB
C
Raw Normal View History

Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (C) 2011 Lawrence Livermore National Security, LLC.
Linux 3.19 compat: file_inode was added struct access f->f_dentry->d_inode was replaced by accessor function file_inode(f) Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3084
2015-02-07 12:41:01 +00:00
* Copyright (C) 2015 Jörg Thalheim.
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
*/
#ifndef _ZFS_VFS_H
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define _ZFS_VFS_H
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
Include sys/taskq.h in linux/vfs_compat.h We should have included sys/taskq.h directly because we use the taskq code here, but we instead had files that included sys/taskq.h also include sys/kmem.h, which happened to include sys/taskq.h. sys/kmem.h no longer does this, so we must define the include as we should have done in the first place. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2411
2014-06-20 17:23:15 +00:00
#include <sys/taskq.h>
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
#include <sys/cred.h>
Linux 4.2 compat: bdi_setup_and_register() The vfs_compat.h header should include the linux/backing-dev.h header because it depends on the bdi_* functions defined there. In previous kernels this header was being indirectly included which prevented a build failure. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #3596
2015-07-14 21:15:13 +00:00
#include <linux/backing-dev.h>
Fix statfs(2) for 32-bit user space When handling a 32-bit statfs() system call the returned fields, although 64-bit in the kernel, must be limited to 32-bits or an EOVERFLOW error will be returned. This is less of an issue for block counts since the default reported block size in 128KiB. But since it is possible to set a smaller block size, these values will be scaled as needed to fit in a 32-bit unsigned long. Unlike most other filesystems the total possible file counts are more likely to overflow because they are calculated based on the available free space in the pool. In order to prevent this the reported value must be capped at 2^32-1. This is only for statfs(2) reporting, there are no changes to the internal ZFS limits. Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com> Reviewed-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #7927 Closes #7122 Closes #7937
2018-09-25 00:11:25 +00:00
#include <linux/compat.h>
Include sys/taskq.h in linux/vfs_compat.h We should have included sys/taskq.h directly because we use the taskq code here, but we instead had files that included sys/taskq.h also include sys/kmem.h, which happened to include sys/taskq.h. sys/kmem.h no longer does this, so we must define the include as we should have done in the first place. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2411
2014-06-20 17:23:15 +00:00
Linux 2.6.28 compat, insert_inode_locked() Added insert_inode_locked() helper function, prior to this most callers used insert_inode_hash(). The older method doesn't check for collisions in the inode_hashtable but it still acceptible for use. Fallback to using insert_inode_hash() when insert_inode_locked() is unavailable.
2011-03-22 16:55:09 +00:00
/*
* 2.6.28 API change,
* Added insert_inode_locked() helper function, prior to this most callers
* used insert_inode_hash(). The older method doesn't check for collisions
* in the inode_hashtable but it still acceptible for use.
*/
#ifndef HAVE_INSERT_INODE_LOCKED
static inline int
insert_inode_locked(struct inode *ip)
{
insert_inode_hash(ip);
return (0);
}
#endif /* HAVE_INSERT_INODE_LOCKED */
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
Tear down and flush the mmap region The inode eviction should unmap the pages associated with the inode. These pages should also be flushed to disk to avoid the data loss. Therefore, use truncate_setsize() in evict_inode() to release the pagecache. The API truncate_setsize() was added in 2.6.35 kernel. To ensure compatibility with the old kernel, the patch defines its own truncate_setsize function. Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com> Closes #255
2011-06-25 12:30:29 +00:00
/*
* 2.6.35 API change,
* Add truncate_setsize() if it is not exported by the Linux kernel.
*
* Truncate the inode and pages associated with the inode. The pages are
* unmapped and removed from cache.
*/
#ifndef HAVE_TRUNCATE_SETSIZE
static inline void
truncate_setsize(struct inode *ip, loff_t new)
{
struct address_space *mapping = ip->i_mapping;
i_size_write(ip, new);
unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
truncate_inode_pages(mapping, new);
unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
}
#endif /* HAVE_TRUNCATE_SETSIZE */
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 01:24:40 +00:00
/*
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
* 2.6.32 - 2.6.33, bdi_setup_and_register() is not available.
* 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments.
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
* 4.0 - 4.11, bdi_setup_and_register() takes 2 arguments.
* 4.12 - x.y, super_setup_bdi_name() new interface.
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 01:24:40 +00:00
*/
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
#if defined(HAVE_SUPER_SETUP_BDI_NAME)
Linux 4.12 compat: fix super_setup_bdi_name() call Provide a format parameter to super_setup_bdi_name() so we don't create duplicate names in '/devices/virtual/bdi' sysfs namespace which would prevent us from mounting more than one ZFS filesystem at a time. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #6147
2017-05-25 16:55:55 +00:00
extern atomic_long_t zfs_bdi_seq;
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
static inline int
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
zpl_bdi_setup(struct super_block *sb, char *name)
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
{
Linux 4.12 compat: fix super_setup_bdi_name() call Provide a format parameter to super_setup_bdi_name() so we don't create duplicate names in '/devices/virtual/bdi' sysfs namespace which would prevent us from mounting more than one ZFS filesystem at a time. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #6147
2017-05-25 16:55:55 +00:00
return super_setup_bdi_name(sb, "%.28s-%ld", name,
atomic_long_inc_return(&zfs_bdi_seq));
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
}
static inline void
zpl_bdi_destroy(struct super_block *sb)
{
}
#elif defined(HAVE_2ARGS_BDI_SETUP_AND_REGISTER)
static inline int
zpl_bdi_setup(struct super_block *sb, char *name)
{
struct backing_dev_info *bdi;
int error;
bdi = kmem_zalloc(sizeof (struct backing_dev_info), KM_SLEEP);
error = bdi_setup_and_register(bdi, name);
if (error) {
kmem_free(bdi, sizeof (struct backing_dev_info));
return (error);
}
sb->s_bdi = bdi;
return (0);
}
static inline void
zpl_bdi_destroy(struct super_block *sb)
{
struct backing_dev_info *bdi = sb->s_bdi;
bdi_destroy(bdi);
kmem_free(bdi, sizeof (struct backing_dev_info));
sb->s_bdi = NULL;
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
}
#elif defined(HAVE_3ARGS_BDI_SETUP_AND_REGISTER)
static inline int
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
zpl_bdi_setup(struct super_block *sb, char *name)
{
struct backing_dev_info *bdi;
int error;
bdi = kmem_zalloc(sizeof (struct backing_dev_info), KM_SLEEP);
error = bdi_setup_and_register(bdi, name, BDI_CAP_MAP_COPY);
if (error) {
kmem_free(sb->s_bdi, sizeof (struct backing_dev_info));
return (error);
}
sb->s_bdi = bdi;
return (0);
}
static inline void
zpl_bdi_destroy(struct super_block *sb)
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
{
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
struct backing_dev_info *bdi = sb->s_bdi;
bdi_destroy(bdi);
kmem_free(bdi, sizeof (struct backing_dev_info));
sb->s_bdi = NULL;
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
}
#else
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
extern atomic_long_t zfs_bdi_seq;
static inline int
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
zpl_bdi_setup(struct super_block *sb, char *name)
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
{
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
struct backing_dev_info *bdi;
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
int error;
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
bdi = kmem_zalloc(sizeof (struct backing_dev_info), KM_SLEEP);
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
bdi->name = name;
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
bdi->capabilities = BDI_CAP_MAP_COPY;
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
error = bdi_init(bdi);
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
if (error) {
kmem_free(bdi, sizeof (struct backing_dev_info));
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
return (error);
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
}
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
Linux 4.12 compat: fix super_setup_bdi_name() call Provide a format parameter to super_setup_bdi_name() so we don't create duplicate names in '/devices/virtual/bdi' sysfs namespace which would prevent us from mounting more than one ZFS filesystem at a time. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #6147
2017-05-25 16:55:55 +00:00
error = bdi_register(bdi, NULL, "%.28s-%ld", name,
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
atomic_long_inc_return(&zfs_bdi_seq));
if (error) {
bdi_destroy(bdi);
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
kmem_free(bdi, sizeof (struct backing_dev_info));
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
return (error);
}
Linux 4.12 compat: super_setup_bdi_name() All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6089
2017-05-02 16:46:18 +00:00
sb->s_bdi = bdi;
return (0);
}
static inline void
zpl_bdi_destroy(struct super_block *sb)
{
struct backing_dev_info *bdi = sb->s_bdi;
bdi_destroy(bdi);
kmem_free(bdi, sizeof (struct backing_dev_info));
sb->s_bdi = NULL;
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
}
Linux 4.0 compat: bdi_setup_and_register() The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #3128
2015-02-28 00:09:52 +00:00
#endif
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 01:24:40 +00:00
Allow mounting datasets more than once Currently mounting an already mounted zfs dataset results in an error, whereas it is typically allowed with other filesystems. This causes some bad interactions with mount namespaces. Take this sequence for example: - Create a dataset - Create a snapshot of the dataset - Create a clone of the snapshot - Create a new mount namespace - Rename the original dataset The rename results in unmounting and remounting the clone in the original mount namespace, however the remount fails because the dataset is still mounted in the new mount namespace. (Note that this means the mount in the new mount namespace is never being unmounted, so perhaps the unmount/remount of the clone isn't actually necessary.) The problem here is a result of the way mounting is implemented in the kernel module. Since it is not mounting block devices it uses mount_nodev() instead of the usual mount_bdev(). However, mount_nodev() is written for filesystems for which each mount is a new instance (i.e. a new super block), and zfs should be able to detect when a mount request can be satisfied using an existing super block. Change zpl_mount() to call sget() directly with it's own test callback. Passing the objset_t object as the fs data allows checking if a superblock already exists for the dataset, and in that case we just need to return a new reference for the sb's root dentry. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Closes #5796 Closes #7207
2018-04-12 19:24:38 +00:00
/*
* 4.14 adds SB_* flag definitions, define them to MS_* equivalents
* if not set.
*/
#ifndef SB_RDONLY
#define SB_RDONLY MS_RDONLY
#endif
#ifndef SB_SILENT
#define SB_SILENT MS_SILENT
#endif
#ifndef SB_ACTIVE
#define SB_ACTIVE MS_ACTIVE
#endif
#ifndef SB_POSIXACL
#define SB_POSIXACL MS_POSIXACL
#endif
#ifndef SB_MANDLOCK
#define SB_MANDLOCK MS_MANDLOCK
#endif
Fix `zfs set atime|relatime=off|on` behavior on inherited datasets `zfs set atime|relatime=off|on` doesn't disable or enable the property on read for datasets whose property was inherited from parent, until a dataset is once unmounted and mounted again. (The properties start to work properly if a dataset is once unmounted and mounted again. The difference comes from regular mount process, e.g. via zpool import, uses mount options based on properties read from ondisk layout for each dataset, whereas `zfs set atime|relatime=off|on` just remounts a specified dataset.) -- # zpool create p1 <device> # zfs create p1/f1 # zfs set atime=off p1 # echo test > /p1/f1/test # sync # zfs list NAME USED AVAIL REFER MOUNTPOINT p1 176K 18.9G 25.5K /p1 p1/f1 26K 18.9G 26K /p1/f1 # zfs get atime NAME PROPERTY VALUE SOURCE p1 atime off local p1/f1 atime off inherited from p1 # stat /p1/f1/test | grep Access | tail -1 Access: 2019-04-26 23:32:33.741205192 +0900 # cat /p1/f1/test test # stat /p1/f1/test | grep Access | tail -1 Access: 2019-04-26 23:32:50.173231861 +0900 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ changed by read(2) -- The problem is that zfsvfs::z_atime which was probably intended to keep incore atime state just gets updated by a callback function of "atime" property change, atime_changed_cb(), and never used for anything else. Since now that all file read and atime update use a common function zpl_iter_read_common() -> file_accessed(), and whether to update atime via ->dirty_inode() is determined by atime_needs_update(), atime_needs_update() needs to return false once atime is turned off. It currently continues to return true on `zfs set atime=off`. Fix atime_changed_cb() by setting or dropping SB_NOATIME in VFS super block depending on a new atime value, so that atime_needs_update() works as expected after property change. The same problem applies to "relatime" except that a self contained relatime test is needed. This is because relatime_need_update() is based on a mount option flag MNT_RELATIME, which doesn't exist in datasets with inherited "relatime" property via `zfs set relatime=...`, hence it needs its own relatime test zfs_relatime_need_update(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Closes #8674 Closes #8675
2019-05-07 17:06:30 +00:00
#ifndef SB_NOATIME
#define SB_NOATIME MS_NOATIME
#endif
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 00:41:09 +00:00
/*
* 2.6.38 API change,
* LOOKUP_RCU flag introduced to distinguish rcu-walk from ref-walk cases.
*/
#ifndef LOOKUP_RCU
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define LOOKUP_RCU 0x0
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 00:41:09 +00:00
#endif /* LOOKUP_RCU */
Linux 3.2 compat: set_nlink() Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170 Use the new set_nlink() kernel function instead. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #462
2011-12-16 21:15:12 +00:00
/*
* 3.2-rc1 API change,
* Add set_nlink() if it is not exported by the Linux kernel.
*
* i_nlink is read-only in Linux 3.2, but it can be set directly in
* earlier kernels.
*/
#ifndef HAVE_SET_NLINK
static inline void
set_nlink(struct inode *inode, unsigned int nlink)
{
inode->i_nlink = nlink;
}
#endif /* HAVE_SET_NLINK */
Linux 3.3 compat, iops->create()/mkdir()/mknod() The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #701
2012-04-30 19:01:49 +00:00
/*
* 3.3 API change,
* The VFS .create, .mkdir and .mknod callbacks were updated to take a
* umode_t type rather than an int. To cleanly handle both definitions
* the zpl_umode_t type is introduced and set accordingly.
*/
Linux 3.6 compat, iops->mkdir() Use .mkdir instead of .create in 3.3 compatibility check. Linux 3.6 modifies inode_operations->create's function prototype. This causes an autotools Linux 3.3. compatibility check for a function prototype change in create, mkdir and mknode to fail. Since mkdir and mknode are unchanged, we modify the check to examine it instead. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-08-16 23:31:54 +00:00
#ifdef HAVE_MKDIR_UMODE_T
Linux 3.3 compat, iops->create()/mkdir()/mknod() The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #701
2012-04-30 19:01:49 +00:00
typedef umode_t zpl_umode_t;
#else
typedef int zpl_umode_t;
#endif
Linux 3.5 compat, end_writeback() changed to clear_inode() The end_writeback() function was changed by moving the call to inode_sync_wait() earlier in to evict(). This effecitvely changes the ordering of the sync but it does not impact the details of the zfs implementation. However, as part of this change end_writeback() was renamed to clear_inode() to reflect the new semantics. This change does impact us and clear_inode() now maps to end_writeback() for kernels prior to 3.5. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #784
2012-07-23 18:39:25 +00:00
/*
* 3.5 API change,
* The clear_inode() function replaces end_writeback() and introduces an
* ordering change regarding when the inode_sync_wait() occurs. See the
* configure check in config/kernel-clear-inode.m4 for full details.
*/
#if defined(HAVE_EVICT_INODE) && !defined(HAVE_CLEAR_INODE)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define clear_inode(ip) end_writeback(ip)
Linux 3.5 compat, end_writeback() changed to clear_inode() The end_writeback() function was changed by moving the call to inode_sync_wait() earlier in to evict(). This effecitvely changes the ordering of the sync but it does not impact the details of the zfs implementation. However, as part of this change end_writeback() was renamed to clear_inode() to reflect the new semantics. This change does impact us and clear_inode() now maps to end_writeback() for kernels prior to 3.5. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #784
2012-07-23 18:39:25 +00:00
#endif /* HAVE_EVICT_INODE && !HAVE_CLEAR_INODE */
Linux 3.6 compat, sget() As of Linux commit 9249e17fe094d853d1ef7475dd559a2cc7e23d42 the mount flags are now passed to sget() so they can be used when initializing a new superblock. ZFS never uses sget() in this fashion so we can simply pass a zero and add a zpl_sget() compatibility wrapper. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 13:40:53 +00:00
/*
* 3.6 API change,
* The sget() helper function now takes the mount flags as an argument.
*/
#ifdef HAVE_5ARG_SGET
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define zpl_sget(type, cmp, set, fl, mtd) sget(type, cmp, set, fl, mtd)
Linux 3.6 compat, sget() As of Linux commit 9249e17fe094d853d1ef7475dd559a2cc7e23d42 the mount flags are now passed to sget() so they can be used when initializing a new superblock. ZFS never uses sget() in this fashion so we can simply pass a zero and add a zpl_sget() compatibility wrapper. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 13:40:53 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define zpl_sget(type, cmp, set, fl, mtd) sget(type, cmp, set, mtd)
Linux 3.6 compat, sget() As of Linux commit 9249e17fe094d853d1ef7475dd559a2cc7e23d42 the mount flags are now passed to sget() so they can be used when initializing a new superblock. ZFS never uses sget() in this fashion so we can simply pass a zero and add a zpl_sget() compatibility wrapper. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 13:40:53 +00:00
#endif /* HAVE_5ARG_SGET */
Add SEEK_DATA/SEEK_HOLE to lseek()/llseek() The approach taken was the rework zfs_holey() as little as possible and then just wrap the code as needed to ensure correct locking and error handling. Tested with xfstests 285 and 286. All tests pass except for 7-9 of 285 which try to reserve blocks first via fallocate(2) and fail because fallocate(2) is not yet supported. Note that the filp->f_lock spinlock did not exist prior to Linux 2.6.30, but we avoid the need for autotools check by virtue of the fact that SEEK_DATA/SEEK_HOLE support was not added until Linux 3.1. An autoconf check was added for lseek_execute() which is currently a private function but the expectation is that it will be exported perhaps as early as Linux 3.11. Reviewed-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1384
2013-06-13 17:51:09 +00:00
#if defined(SEEK_HOLE) && defined(SEEK_DATA) && !defined(HAVE_LSEEK_EXECUTE)
static inline loff_t
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
lseek_execute(
struct file *filp,
struct inode *inode,
loff_t offset,
loff_t maxsize)
Add SEEK_DATA/SEEK_HOLE to lseek()/llseek() The approach taken was the rework zfs_holey() as little as possible and then just wrap the code as needed to ensure correct locking and error handling. Tested with xfstests 285 and 286. All tests pass except for 7-9 of 285 which try to reserve blocks first via fallocate(2) and fail because fallocate(2) is not yet supported. Note that the filp->f_lock spinlock did not exist prior to Linux 2.6.30, but we avoid the need for autotools check by virtue of the fact that SEEK_DATA/SEEK_HOLE support was not added until Linux 3.1. An autoconf check was added for lseek_execute() which is currently a private function but the expectation is that it will be exported perhaps as early as Linux 3.11. Reviewed-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1384
2013-06-13 17:51:09 +00:00
{
if (offset < 0 && !(filp->f_mode & FMODE_UNSIGNED_OFFSET))
return (-EINVAL);
if (offset > maxsize)
return (-EINVAL);
if (offset != filp->f_pos) {
spin_lock(&filp->f_lock);
filp->f_pos = offset;
filp->f_version = 0;
spin_unlock(&filp->f_lock);
}
return (offset);
}
#endif /* SEEK_HOLE && SEEK_DATA && !HAVE_LSEEK_EXECUTE */
Honor CONFIG_FS_POSIX_ACL kernel option The required Posix ACL interfaces are only available for kernels with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix ACL support for these kernels. All major distribution kernels enable CONFIG_FS_POSIX_ACL by default. If your kernel does not support Posix ACLs the following warning will be printed at ZFS module load time. "ZFS: Posix ACLs disabled by kernel" Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1825
2013-11-02 23:40:26 +00:00
#if defined(CONFIG_FS_POSIX_ACL)
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
/*
* These functions safely approximates the behavior of posix_acl_release()
* which cannot be used because it calls the GPL-only symbol kfree_rcu().
* The in-kernel version, which can access the RCU, frees the ACLs after
* the grace period expires. Because we're unsure how long that grace
* period may be this implementation conservatively delays for 60 seconds.
* This is several orders of magnitude larger than expected grace period.
* At 60 seconds the kernel will also begin issuing RCU stall warnings.
*/
Linux 4.11 compat: avoid refcount_t name conflict Related to commit 4859fe796, when directly using the kernel's refcount functions in kernel compatibility code do not map refcount_t to zfs_refcount_t. This leads to a type mismatch. Longer term we should consider renaming refcount_t to zfs_refcount_t in the zfs code base. Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@nutanix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7148
2018-02-08 22:31:08 +00:00
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
#include <linux/posix_acl.h>
#if defined(HAVE_POSIX_ACL_RELEASE) && !defined(HAVE_POSIX_ACL_RELEASE_GPL_ONLY)
#define zpl_posix_acl_release(arg) posix_acl_release(arg)
#else
Batch free zpl_posix_acl_release Currently every calls to zpl_posix_acl_release will schedule a delayed task, and each delayed task will add a timer. This used to be fine except for possibly bad performance impact. However, in Linux 4.8, a new timer wheel implementation[1] is introduced. In this new implementation, the larger the delay, the less accuracy the timer is. So when we have a flood of timer from zpl_posix_acl_release, they will expire at the same time. Couple with the fact that task_expire will do linear search with lock held. This causes an extreme amount of contention inside interrupt and would actually lockup the system. We fix this by doing batch free to prevent a flood of delayed task. Every call to zpl_posix_acl_release will put the posix_acl to be freed on a lockless list. Every batch window, 1 sec, the zpl_posix_acl_free will fire up and free every posix_acl that passed the grace period on the list. This way, we only have one delayed task every second. [1] https://lwn.net/Articles/646950/ Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-28 20:37:00 +00:00
void zpl_posix_acl_release_impl(struct posix_acl *);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
static inline void
zpl_posix_acl_release(struct posix_acl *acl)
{
if ((acl == NULL) || (acl == ACL_NOT_CACHED))
return;
Linux 4.16 compat: use correct *_dec_and_test() Use refcount_dec_and_test() on 4.16+ kernels, atomic_dec_and_test() on older kernels. https://lwn.net/Articles/714974/ Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes: #7179 Closes: #7211
2018-02-22 17:02:06 +00:00
#ifdef HAVE_ACL_REFCOUNT
if (refcount_dec_and_test(&acl->a_refcount))
zpl_posix_acl_release_impl(acl);
#else
Batch free zpl_posix_acl_release Currently every calls to zpl_posix_acl_release will schedule a delayed task, and each delayed task will add a timer. This used to be fine except for possibly bad performance impact. However, in Linux 4.8, a new timer wheel implementation[1] is introduced. In this new implementation, the larger the delay, the less accuracy the timer is. So when we have a flood of timer from zpl_posix_acl_release, they will expire at the same time. Couple with the fact that task_expire will do linear search with lock held. This causes an extreme amount of contention inside interrupt and would actually lockup the system. We fix this by doing batch free to prevent a flood of delayed task. Every call to zpl_posix_acl_release will put the posix_acl to be freed on a lockless list. Every batch window, 1 sec, the zpl_posix_acl_free will fire up and free every posix_acl that passed the grace period on the list. This way, we only have one delayed task every second. [1] https://lwn.net/Articles/646950/ Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-28 20:37:00 +00:00
if (atomic_dec_and_test(&acl->a_refcount))
zpl_posix_acl_release_impl(acl);
Linux 4.16 compat: use correct *_dec_and_test() Use refcount_dec_and_test() on 4.16+ kernels, atomic_dec_and_test() on older kernels. https://lwn.net/Articles/714974/ Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes: #7179 Closes: #7211
2018-02-22 17:02:06 +00:00
#endif
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
}
Use set_cached_acl and forget_cached_acl when possible Originally, these two function are inline, so their usability is tied to posix_acl_release. However, since Linux 3.14, they became EXPORT_SYMBOL, so we can always use them. In this patch, we create an independent test for these two functions so we can use them when possible. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-11-02 00:19:52 +00:00
#endif /* HAVE_POSIX_ACL_RELEASE */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
Use set_cached_acl and forget_cached_acl when possible Originally, these two function are inline, so their usability is tied to posix_acl_release. However, since Linux 3.14, they became EXPORT_SYMBOL, so we can always use them. In this patch, we create an independent test for these two functions so we can use them when possible. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-11-02 00:19:52 +00:00
#ifdef HAVE_SET_CACHED_ACL_USABLE
#define zpl_set_cached_acl(ip, ty, n) set_cached_acl(ip, ty, n)
#define zpl_forget_cached_acl(ip, ty) forget_cached_acl(ip, ty)
#else
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
static inline void
codebase style improvements for OpenZFS 6459 port
2017-01-20 21:17:55 +00:00
zpl_set_cached_acl(struct inode *ip, int type, struct posix_acl *newer)
{
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
struct posix_acl *older = NULL;
spin_lock(&ip->i_lock);
if ((newer != ACL_NOT_CACHED) && (newer != NULL))
posix_acl_dup(newer);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
switch (type) {
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
case ACL_TYPE_ACCESS:
older = ip->i_acl;
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
rcu_assign_pointer(ip->i_acl, newer);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
break;
case ACL_TYPE_DEFAULT:
older = ip->i_default_acl;
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
rcu_assign_pointer(ip->i_default_acl, newer);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
break;
}
spin_unlock(&ip->i_lock);
zpl_posix_acl_release(older);
}
static inline void
codebase style improvements for OpenZFS 6459 port
2017-01-20 21:17:55 +00:00
zpl_forget_cached_acl(struct inode *ip, int type)
{
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
zpl_set_cached_acl(ip, type, (struct posix_acl *)ACL_NOT_CACHED);
}
Use set_cached_acl and forget_cached_acl when possible Originally, these two function are inline, so their usability is tied to posix_acl_release. However, since Linux 3.14, they became EXPORT_SYMBOL, so we can always use them. In this patch, we create an independent test for these two functions so we can use them when possible. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-11-02 00:19:52 +00:00
#endif /* HAVE_SET_CACHED_ACL_USABLE */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
Linux 3.14 compat: posix_acl_{create,chmod} posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod} Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 04:59:36 +00:00
#ifndef HAVE___POSIX_ACL_CHMOD
#ifdef HAVE_POSIX_ACL_CHMOD
#define __posix_acl_chmod(acl, gfp, mode) posix_acl_chmod(acl, gfp, mode)
#define __posix_acl_create(acl, gfp, mode) posix_acl_create(acl, gfp, mode)
#else
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
static inline int
codebase style improvements for OpenZFS 6459 port
2017-01-20 21:17:55 +00:00
__posix_acl_chmod(struct posix_acl **acl, int flags, umode_t umode)
{
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
struct posix_acl *oldacl = *acl;
mode_t mode = umode;
int error;
*acl = posix_acl_clone(*acl, flags);
zpl_posix_acl_release(oldacl);
if (!(*acl))
return (-ENOMEM);
error = posix_acl_chmod_masq(*acl, mode);
if (error) {
zpl_posix_acl_release(*acl);
*acl = NULL;
}
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
return (error);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
}
static inline int
codebase style improvements for OpenZFS 6459 port
2017-01-20 21:17:55 +00:00
__posix_acl_create(struct posix_acl **acl, int flags, umode_t *umodep)
{
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
struct posix_acl *oldacl = *acl;
mode_t mode = *umodep;
int error;
*acl = posix_acl_clone(*acl, flags);
zpl_posix_acl_release(oldacl);
if (!(*acl))
return (-ENOMEM);
error = posix_acl_create_masq(*acl, &mode);
*umodep = mode;
if (error < 0) {
zpl_posix_acl_release(*acl);
*acl = NULL;
}
return (error);
}
#endif /* HAVE_POSIX_ACL_CHMOD */
Linux 3.14 compat: posix_acl_{create,chmod} posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod} Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 04:59:36 +00:00
#endif /* HAVE___POSIX_ACL_CHMOD */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
Allow building without ACLs Some kernel definitions were buried inside the #if... #endif logic for ACLs. When ACLs are not available these definitions get lost causing the build to fail. Signed-off-by: Chris Wedgwood <cw@f00f.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2349
2014-05-27 00:09:45 +00:00
#ifdef HAVE_POSIX_ACL_EQUIV_MODE_UMODE_T
typedef umode_t zpl_equivmode_t;
#else
typedef mode_t zpl_equivmode_t;
#endif /* HAVE_POSIX_ACL_EQUIV_MODE_UMODE_T */
Linux 4.8 compat: posix_acl_valid() The posix_acl_valid() function has been updated to require a user namespace. Filesystem callers should normally provide the user_ns from the super block associcated with the ACL; the zpl_posix_acl_valid() wrapper has been added for this purpose. See https://github.com/torvalds/linux/commit/0d4d717f for complete details. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4922
2016-08-02 18:11:45 +00:00
/*
* 4.8 API change,
* posix_acl_valid() now must be passed a namespace, the namespace from
* from super block associated with the given inode is used for this purpose.
*/
#ifdef HAVE_POSIX_ACL_VALID_WITH_NS
#define zpl_posix_acl_valid(ip, acl) posix_acl_valid(ip->i_sb->s_user_ns, acl)
#else
#define zpl_posix_acl_valid(ip, acl) posix_acl_valid(acl)
#endif
Allow building without ACLs Some kernel definitions were buried inside the #if... #endif logic for ACLs. When ACLs are not available these definitions get lost causing the build to fail. Signed-off-by: Chris Wedgwood <cw@f00f.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2349
2014-05-27 00:09:45 +00:00
#endif /* CONFIG_FS_POSIX_ACL */
/*
* 2.6.38 API change,
* The is_owner_or_cap() function was renamed to inode_owner_or_capable().
*/
#ifdef HAVE_INODE_OWNER_OR_CAPABLE
#define zpl_inode_owner_or_capable(ip) inode_owner_or_capable(ip)
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
#else
Allow building without ACLs Some kernel definitions were buried inside the #if... #endif logic for ACLs. When ACLs are not available these definitions get lost causing the build to fail. Signed-off-by: Chris Wedgwood <cw@f00f.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2349
2014-05-27 00:09:45 +00:00
#define zpl_inode_owner_or_capable(ip) is_owner_or_cap(ip)
#endif /* HAVE_INODE_OWNER_OR_CAPABLE */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 16:22:15 +00:00
Linux 3.19 compat: file_inode was added struct access f->f_dentry->d_inode was replaced by accessor function file_inode(f) Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3084
2015-02-07 12:41:01 +00:00
/*
* 3.19 API change
* struct access f->f_dentry->d_inode was replaced by accessor function
* file_inode(f)
*/
#ifndef HAVE_FILE_INODE
static inline struct inode *file_inode(const struct file *f)
{
return (f->f_dentry->d_inode);
}
#endif /* HAVE_FILE_INODE */
Use file_dentry and file_inode wrappers Fix bugs due to kernel change in torvalds/linux@4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay"). This problem crashes system when use zfs as a layer of overlayfs. Signed-off-by: Chen Haiquan <oc@yunify.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4914 Closes #4935
2016-08-04 15:57:35 +00:00
/*
* 4.1 API change
* struct access file->f_path.dentry was replaced by accessor function
* file_dentry(f)
*/
#ifndef HAVE_FILE_DENTRY
static inline struct dentry *file_dentry(const struct file *f)
{
return (f->f_path.dentry);
}
#endif /* HAVE_FILE_DENTRY */
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
#ifdef HAVE_KUID_HELPERS
static inline uid_t zfs_uid_read_impl(struct inode *ip)
{
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#ifdef HAVE_SUPER_USER_NS
return (from_kuid(ip->i_sb->s_user_ns, ip->i_uid));
#else
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
return (from_kuid(kcred->user_ns, ip->i_uid));
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#endif
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
}
static inline uid_t zfs_uid_read(struct inode *ip)
{
return (zfs_uid_read_impl(ip));
}
static inline gid_t zfs_gid_read_impl(struct inode *ip)
{
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#ifdef HAVE_SUPER_USER_NS
return (from_kgid(ip->i_sb->s_user_ns, ip->i_gid));
#else
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
return (from_kgid(kcred->user_ns, ip->i_gid));
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#endif
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
}
static inline gid_t zfs_gid_read(struct inode *ip)
{
return (zfs_gid_read_impl(ip));
}
static inline void zfs_uid_write(struct inode *ip, uid_t uid)
{
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#ifdef HAVE_SUPER_USER_NS
ip->i_uid = make_kuid(ip->i_sb->s_user_ns, uid);
#else
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
ip->i_uid = make_kuid(kcred->user_ns, uid);
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#endif
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
}
static inline void zfs_gid_write(struct inode *ip, gid_t gid)
{
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#ifdef HAVE_SUPER_USER_NS
ip->i_gid = make_kgid(ip->i_sb->s_user_ns, gid);
#else
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
ip->i_gid = make_kgid(kcred->user_ns, gid);
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
#endif
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
}
Linux 4.8 compat: new s_user_ns member of struct super_block Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4928
2016-08-03 17:19:04 +00:00
Check whether the kernel supports i_uid/gid_read/write helpers Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4685 Issue #227
2016-05-30 17:37:36 +00:00
#else
static inline uid_t zfs_uid_read(struct inode *ip)
{
return (ip->i_uid);
}
static inline gid_t zfs_gid_read(struct inode *ip)
{
return (ip->i_gid);
}
static inline void zfs_uid_write(struct inode *ip, uid_t uid)
{
ip->i_uid = uid;
}
static inline void zfs_gid_write(struct inode *ip, gid_t gid)
{
ip->i_gid = gid;
}
#endif
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-24 23:21:13 +00:00
/*
* 2.6.38 API change
*/
#ifdef HAVE_FOLLOW_DOWN_ONE
#define zpl_follow_down_one(path) follow_down_one(path)
#define zpl_follow_up(path) follow_up(path)
#else
#define zpl_follow_down_one(path) follow_down(path)
#define zpl_follow_up(path) follow_up(path)
#endif
Linux 4.9 compat: inode_change_ok() renamed setattr_prepare() In torvalds/linux@31051c8 the inode_change_ok() function was renamed setattr_prepare() and updated to take a dentry ratheri than an inode. Update the code to call the setattr_prepare() and add a wrapper function which call inode_change_ok() for older kernels. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Requires-spl: refs/pull/581/head
2016-10-18 23:49:23 +00:00
/*
* 4.9 API change
*/
#ifndef HAVE_SETATTR_PREPARE
static inline int
setattr_prepare(struct dentry *dentry, struct iattr *ia)
{
return (inode_change_ok(dentry->d_inode, ia));
}
#endif
Linux 4.11 compat: iops.getattr and friends In torvalds/linux@a528d35, there are changes to the getattr family of functions, struct kstat, and the interface of inode_operations .getattr. The inode_operations .getattr and simple_getattr() interface changed to: int (*getattr) (const struct path *, struct dentry *, struct kstat *, u32 request_mask, unsigned int query_flags) The request_mask argument indicates which field(s) the caller intends to use. Fields the caller has not specified via request_mask may be set in the returned struct anyway, but their values may be approximate. The query_flags argument indicates whether the filesystem must update the attributes from the backing store. Currently both fields are ignored. It is possible that getattr-related functions within zfs could be optimized based on the request_mask. struct kstat includes new fields: u32 result_mask; /* What fields the user got */ u64 attributes; /* See STATX_ATTR_* flags */ struct timespec btime; /* File creation time */ Fields attribute and btime are cleared; the result_mask reflects this. These appear to be optional based on simple_getattr() and vfs_getattr() within the kernel, which take the same approach. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5875
2017-03-21 00:51:16 +00:00
/*
* 4.11 API change
* These macros are defined by kernel 4.11. We define them so that the same
* code builds under kernels < 4.11 and >= 4.11. The macros are set to 0 so
* that it will create obvious failures if they are accidentally used when built
* against a kernel >= 4.11.
*/
#ifndef STATX_BASIC_STATS
#define STATX_BASIC_STATS 0
#endif
#ifndef AT_STATX_SYNC_AS_STAT
#define AT_STATX_SYNC_AS_STAT 0
#endif
/*
* 4.11 API change
* 4.11 takes struct path *, < 4.11 takes vfsmount *
*/
#ifdef HAVE_VFSMOUNT_IOPS_GETATTR
#define ZPL_GETATTR_WRAPPER(func) \
static int \
func(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) \
{ \
struct path path = { .mnt = mnt, .dentry = dentry }; \
return func##_impl(&path, stat, STATX_BASIC_STATS, \
AT_STATX_SYNC_AS_STAT); \
}
#elif defined(HAVE_PATH_IOPS_GETATTR)
#define ZPL_GETATTR_WRAPPER(func) \
static int \
func(const struct path *path, struct kstat *stat, u32 request_mask, \
unsigned int query_flags) \
{ \
return (func##_impl(path, stat, request_mask, query_flags)); \
}
#else
#error
#endif
Linux 4.12 compat: CURRENT_TIME removed Linux 4.9 added current_time() as the preferred interface to get the filesystem time. CURRENT_TIME was retired in Linux 4.12. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6114
2017-05-10 16:30:48 +00:00
/*
* 4.9 API change
* Preferred interface to get the current FS time.
*/
#if !defined(HAVE_CURRENT_TIME)
static inline struct timespec
current_time(struct inode *ip)
{
return (timespec_trunc(current_kernel_time(), ip->i_sb->s_time_gran));
}
#endif
Linux 4.11 compat: iops.getattr and friends In torvalds/linux@a528d35, there are changes to the getattr family of functions, struct kstat, and the interface of inode_operations .getattr. The inode_operations .getattr and simple_getattr() interface changed to: int (*getattr) (const struct path *, struct dentry *, struct kstat *, u32 request_mask, unsigned int query_flags) The request_mask argument indicates which field(s) the caller intends to use. Fields the caller has not specified via request_mask may be set in the returned struct anyway, but their values may be approximate. The query_flags argument indicates whether the filesystem must update the attributes from the backing store. Currently both fields are ignored. It is possible that getattr-related functions within zfs could be optimized based on the request_mask. struct kstat includes new fields: u32 result_mask; /* What fields the user got */ u64 attributes; /* See STATX_ATTR_* flags */ struct timespec btime; /* File creation time */ Fields attribute and btime are cleared; the result_mask reflects this. These appear to be optional based on simple_getattr() and vfs_getattr() within the kernel, which take the same approach. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5875
2017-03-21 00:51:16 +00:00
Linux 4.16 compat: inode_set_iversion() A new interface was added to manipulate the version field of an inode. Add a inode_set_iversion() wrapper for older kernels and use the new interface when available. The i_version field was dropped from the trace point due to the switch to an atomic64_t i_version type. Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@nutanix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7148
2018-02-08 22:27:59 +00:00
/*
* 4.16 API change
* Added iversion interface for managing inode version field.
*/
#ifdef HAVE_INODE_SET_IVERSION
#include <linux/iversion.h>
#else
static inline void
inode_set_iversion(struct inode *ip, u64 val)
{
ip->i_version = val;
}
#endif
Fix statfs(2) for 32-bit user space When handling a 32-bit statfs() system call the returned fields, although 64-bit in the kernel, must be limited to 32-bits or an EOVERFLOW error will be returned. This is less of an issue for block counts since the default reported block size in 128KiB. But since it is possible to set a smaller block size, these values will be scaled as needed to fit in a 32-bit unsigned long. Unlike most other filesystems the total possible file counts are more likely to overflow because they are calculated based on the available free space in the pool. In order to prevent this the reported value must be capped at 2^32-1. This is only for statfs(2) reporting, there are no changes to the internal ZFS limits. Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com> Reviewed-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #7927 Closes #7122 Closes #7937
2018-09-25 00:11:25 +00:00
/*
* Returns true when called in the context of a 32-bit system call.
*/
static inline int
zpl_is_32bit_api(void)
{
#ifdef CONFIG_COMPAT
#ifdef HAVE_IN_COMPAT_SYSCALL
return (in_compat_syscall());
#else
return (is_compat_task());
#endif
#else
return (BITS_PER_LONG == 32);
#endif
}
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
#endif /* _ZFS_VFS_H */