Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/tests/runfiles/sanity.run

635 lines
24 KiB
Plaintext
Raw Permalink Normal View History

Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# This run file contains a subset of functional tests which exercise
# as much functionality as possible while still executing relatively
# quickly. The included tests should take no more than a few seconds
# each to run at most. This provides a convenient way to sanity test a
Fix various typos Correct an assortment of typos throughout the code base. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Closes #11774
2021-04-03 01:38:53 +00:00
# change before committing to a full test run which takes several hours.
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
#
# Approximate run time: 15 minutes
#
[DEFAULT]
pre = setup
quiet = False
pre_user = root
user = root
CI: add new zfs-tests-sanity workflow Run zfs-tests with sanity.run for brief results. Timeouts are rare, so minimize false positives by increasing the default from 60 to 180 seconds. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru> Closes #11304
2020-12-08 17:53:45 +00:00
timeout = 180
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
post_user = root
post = cleanup
failsafe_user = root
failsafe = callbacks/zfs_failsafe
outputdir = /var/tmp/test_results
tags = ['functional']
Fix regression in POSIX mode behavior Commit 235a85657 introduced a regression in evaluation of POSIX modes that require group DENY entries in the internal ZFS ACL. An example of such a POSX mode is 007. When write_implies_delete_child is set, then ACE_WRITE_DATA is added to `wanted_dirperms` in prior to calling zfs_zaccess_common(). This occurs is zfs_zaccess_delete(). Unfortunately, when zfs_zaccess_aces_check hits this particular DENY ACE, zfs_groupmember() is checked to determine whether access should be denied, and since zfs_groupmember() always returns B_TRUE on Linux and so this check is failed, resulting ultimately in EPERM being returned. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Andrew Walker <awalker@ixsystems.com> Closes #11760
2021-03-20 05:50:46 +00:00
[tests/functional/acl/off]
tests = ['posixmode']
tags = ['functional', 'acl']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
[tests/functional/alloc_class]
tests = ['alloc_class_003_pos', 'alloc_class_004_pos', 'alloc_class_005_pos',
'alloc_class_006_pos', 'alloc_class_008_pos', 'alloc_class_010_pos',
'alloc_class_011_neg']
tags = ['functional', 'alloc_class']
[tests/functional/arc]
tests = ['dbufstats_001_pos', 'dbufstats_002_pos', 'arcstats_runtime_tuning']
tags = ['functional', 'arc']
[tests/functional/bootfs]
tests = ['bootfs_004_neg', 'bootfs_007_pos']
tags = ['functional', 'bootfs']
[tests/functional/cache]
tests = ['cache_004_neg', 'cache_005_neg', 'cache_007_neg', 'cache_010_pos']
tags = ['functional', 'cache']
[tests/functional/cachefile]
tests = ['cachefile_001_pos', 'cachefile_002_pos', 'cachefile_003_pos',
'cachefile_004_pos']
tags = ['functional', 'cachefile']
[tests/functional/casenorm]
tests = ['case_all_values', 'norm_all_values', 'sensitive_none_lookup',
'sensitive_none_delete', 'insensitive_none_lookup',
'insensitive_none_delete', 'mixed_none_lookup', 'mixed_none_delete']
tags = ['functional', 'casenorm']
[tests/functional/channel_program/lua_core]
tests = ['tst.args_to_lua', 'tst.divide_by_zero', 'tst.exists',
'tst.integer_illegal', 'tst.integer_overflow', 'tst.language_functions_neg',
'tst.language_functions_pos', 'tst.large_prog', 'tst.libraries',
'tst.memory_limit', 'tst.nested_neg', 'tst.nested_pos', 'tst.nvlist_to_lua',
'tst.recursive_neg', 'tst.recursive_pos', 'tst.return_large',
'tst.return_nvlist_neg', 'tst.return_nvlist_pos',
'tst.return_recursive_table', 'tst.stack_gsub', 'tst.timeout']
tags = ['functional', 'channel_program', 'lua_core']
[tests/functional/channel_program/synctask_core]
tests = ['tst.destroy_fs', 'tst.destroy_snap', 'tst.get_count_and_limit',
'tst.get_index_props', 'tst.get_mountpoint', 'tst.get_neg',
'tst.get_number_props', 'tst.get_string_props', 'tst.get_type',
'tst.get_userquota', 'tst.get_written', 'tst.inherit', 'tst.list_bookmarks',
'tst.list_children', 'tst.list_clones', 'tst.list_holds',
'tst.list_snapshots', 'tst.list_system_props',
'tst.list_user_props', 'tst.parse_args_neg','tst.promote_conflict',
'tst.promote_multiple', 'tst.promote_simple', 'tst.rollback_mult',
'tst.rollback_one', 'tst.set_props', 'tst.snapshot_destroy',
'tst.snapshot_neg', 'tst.snapshot_recursive', 'tst.snapshot_simple',
'tst.bookmark.create', 'tst.bookmark.copy']
tags = ['functional', 'channel_program', 'synctask_core']
[tests/functional/cli_root/zdb]
tests = ['zdb_003_pos', 'zdb_004_pos', 'zdb_005_pos']
pre =
post =
tags = ['functional', 'cli_root', 'zdb']
[tests/functional/cli_root/zfs]
tests = ['zfs_001_neg', 'zfs_002_pos']
tags = ['functional', 'cli_root', 'zfs']
[tests/functional/cli_root/zfs_bookmark]
tests = ['zfs_bookmark_cliargs']
tags = ['functional', 'cli_root', 'zfs_bookmark']
[tests/functional/cli_root/zfs_change-key]
tests = ['zfs_change-key', 'zfs_change-key_child', 'zfs_change-key_format',
'zfs_change-key_inherit', 'zfs_change-key_load', 'zfs_change-key_location',
'zfs_change-key_pbkdf2iters', 'zfs_change-key_clones']
tags = ['functional', 'cli_root', 'zfs_change-key']
[tests/functional/cli_root/zfs_clone]
tests = ['zfs_clone_001_neg', 'zfs_clone_002_pos', 'zfs_clone_003_pos',
'zfs_clone_004_pos', 'zfs_clone_005_pos', 'zfs_clone_006_pos',
'zfs_clone_007_pos', 'zfs_clone_008_neg', 'zfs_clone_009_neg',
'zfs_clone_encrypted']
tags = ['functional', 'cli_root', 'zfs_clone']
[tests/functional/cli_root/zfs_create]
tests = ['zfs_create_001_pos', 'zfs_create_002_pos', 'zfs_create_003_pos',
'zfs_create_004_pos', 'zfs_create_005_pos', 'zfs_create_006_pos',
'zfs_create_007_pos', 'zfs_create_011_pos', 'zfs_create_012_pos',
'zfs_create_013_pos', 'zfs_create_014_pos', 'zfs_create_encrypted',
'zfs_create_dryrun', 'zfs_create_verbose']
tags = ['functional', 'cli_root', 'zfs_create']
[tests/functional/cli_root/zfs_destroy]
tests = ['zfs_destroy_002_pos', 'zfs_destroy_003_pos',
'zfs_destroy_004_pos', 'zfs_destroy_006_neg', 'zfs_destroy_007_neg',
'zfs_destroy_008_pos', 'zfs_destroy_009_pos', 'zfs_destroy_010_pos',
'zfs_destroy_011_pos', 'zfs_destroy_012_pos', 'zfs_destroy_013_neg',
'zfs_destroy_014_pos', 'zfs_destroy_dev_removal',
'zfs_destroy_dev_removal_condense']
tags = ['functional', 'cli_root', 'zfs_destroy']
[tests/functional/cli_root/zfs_diff]
tests = ['zfs_diff_cliargs', 'zfs_diff_encrypted']
tags = ['functional', 'cli_root', 'zfs_diff']
[tests/functional/cli_root/zfs_get]
tests = ['zfs_get_003_pos', 'zfs_get_006_neg', 'zfs_get_007_neg',
'zfs_get_010_neg']
tags = ['functional', 'cli_root', 'zfs_get']
[tests/functional/cli_root/zfs_inherit]
tests = ['zfs_inherit_001_neg', 'zfs_inherit_003_pos', 'zfs_inherit_mountpoint']
tags = ['functional', 'cli_root', 'zfs_inherit']
[tests/functional/cli_root/zfs_load-key]
tests = ['zfs_load-key', 'zfs_load-key_all', 'zfs_load-key_file',
libzfs: add keylocation=https://, backed by fetch(3) or libcurl Add support for http and https to the keylocation properly to allow encryption keys to be fetched from the specified URL. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Issue #9543 Closes #9947 Closes #11956
2021-05-13 04:21:35 +00:00
'zfs_load-key_https', 'zfs_load-key_location', 'zfs_load-key_noop',
'zfs_load-key_recursive']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'cli_root', 'zfs_load-key']
[tests/functional/cli_root/zfs_mount]
tests = ['zfs_mount_001_pos', 'zfs_mount_002_pos', 'zfs_mount_003_pos',
'zfs_mount_004_pos', 'zfs_mount_005_pos', 'zfs_mount_007_pos',
'zfs_mount_009_neg', 'zfs_mount_010_neg', 'zfs_mount_011_neg',
'zfs_mount_012_pos', 'zfs_mount_encrypted', 'zfs_mount_remount',
Add support for zfs mount -R <filesystem> This commit adds support for mounting a dataset along with all of it's children with '-R' flag for zfs mount. There can be scenarios where we want to mount all datasets under one hierarchy instead of mounting all datasets present on system with '-a' flag. '-R' flag should work on all root and non-root datasets. Usage information and man page has been updated for zfs mount. A test for verifying the behavior for '-R' flag is also added. Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Umer Saleem <usaleem@ixsystems.com> Closes #16015
2024-04-11 22:10:24 +00:00
'zfs_mount_all_fail', 'zfs_mount_all_mountpoints',
'zfs_mount_test_race', 'zfs_mount_recursive']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'cli_root', 'zfs_mount']
[tests/functional/cli_root/zfs_program]
tests = ['zfs_program_json']
tags = ['functional', 'cli_root', 'zfs_program']
[tests/functional/cli_root/zfs_promote]
tests = ['zfs_promote_001_pos', 'zfs_promote_002_pos', 'zfs_promote_003_pos',
'zfs_promote_004_pos', 'zfs_promote_005_pos', 'zfs_promote_006_neg',
'zfs_promote_007_neg', 'zfs_promote_008_pos', 'zfs_promote_encryptionroot']
tags = ['functional', 'cli_root', 'zfs_promote']
[tests/functional/cli_root/zfs_receive]
tests = ['zfs_receive_001_pos', 'zfs_receive_002_pos', 'zfs_receive_003_pos',
'zfs_receive_004_neg', 'zfs_receive_005_neg', 'zfs_receive_006_pos',
'zfs_receive_007_neg', 'zfs_receive_008_pos', 'zfs_receive_009_neg',
'zfs_receive_010_pos', 'zfs_receive_011_pos', 'zfs_receive_012_pos',
'zfs_receive_013_pos', 'zfs_receive_014_pos', 'zfs_receive_015_pos',
'zfs_receive_016_pos', 'zfs_receive_from_encrypted',
'zfs_receive_to_encrypted', 'zfs_receive_raw',
'zfs_receive_raw_incremental', 'zfs_receive_-e',
'zfs_receive_raw_-d', 'zfs_receive_from_zstd', 'zfs_receive_new_props']
tags = ['functional', 'cli_root', 'zfs_receive']
[tests/functional/cli_root/zfs_rename]
tests = ['zfs_rename_003_pos', 'zfs_rename_004_neg',
'zfs_rename_005_neg', 'zfs_rename_006_pos', 'zfs_rename_007_pos',
'zfs_rename_008_pos', 'zfs_rename_009_neg', 'zfs_rename_010_neg',
'zfs_rename_011_pos', 'zfs_rename_012_neg', 'zfs_rename_013_pos',
'zfs_rename_encrypted_child', 'zfs_rename_to_encrypted',
'zfs_rename_mountpoint', 'zfs_rename_nounmount']
tags = ['functional', 'cli_root', 'zfs_rename']
[tests/functional/cli_root/zfs_reservation]
tests = ['zfs_reservation_001_pos', 'zfs_reservation_002_pos']
tags = ['functional', 'cli_root', 'zfs_reservation']
[tests/functional/cli_root/zfs_rollback]
tests = ['zfs_rollback_003_neg', 'zfs_rollback_004_neg']
tags = ['functional', 'cli_root', 'zfs_rollback']
[tests/functional/cli_root/zfs_send]
tests = ['zfs_send_001_pos', 'zfs_send_002_pos', 'zfs_send_003_pos',
'zfs_send_004_neg', 'zfs_send_005_pos', 'zfs_send_encrypted',
'zfs_send_raw']
tags = ['functional', 'cli_root', 'zfs_send']
[tests/functional/cli_root/zfs_set]
tests = ['cache_001_pos', 'cache_002_neg', 'canmount_001_pos',
'canmount_002_pos', 'canmount_003_pos', 'canmount_004_pos',
'checksum_001_pos', 'compression_001_pos', 'mountpoint_001_pos',
'mountpoint_002_pos', 'user_property_002_pos',
'share_mount_001_neg', 'snapdir_001_pos', 'onoffs_001_pos',
'user_property_001_pos', 'user_property_003_neg', 'readonly_001_pos',
'user_property_004_pos', 'version_001_neg',
'zfs_set_003_neg', 'property_alias_001_pos',
Add '-u' - nomount flag for zfs set This commit adds '-u' flag for zfs set operation. With this flag, mountpoint, sharenfs and sharesmb properties can be updated without actually mounting or sharing the dataset. Previously, if dataset was unmounted, and mountpoint property was updated, dataset was not mounted after the update. This behavior is changed in #15240. We mount the dataset whenever mountpoint property is updated, regardless if it's mounted or not. To provide the user with option to keep the dataset unmounted and still update the mountpoint without mounting the dataset, '-u' flag can be used. If any of mountpoint, sharenfs or sharesmb properties are updated with '-u' flag, the property is set to desired value but the operation to (re/un)mount and/or (re/un)share the dataset is not performed and dataset remains as it was before. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Umer Saleem <usaleem@ixsystems.com> Closes #15322
2023-10-02 23:58:54 +00:00
'zfs_set_keylocation', 'zfs_set_feature_activation', 'zfs_set_nomount']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'cli_root', 'zfs_set']
[tests/functional/cli_root/zfs_snapshot]
tests = ['zfs_snapshot_001_neg', 'zfs_snapshot_002_neg',
'zfs_snapshot_003_neg', 'zfs_snapshot_006_pos', 'zfs_snapshot_007_neg']
tags = ['functional', 'cli_root', 'zfs_snapshot']
[tests/functional/cli_root/zfs_unload-key]
tests = ['zfs_unload-key', 'zfs_unload-key_all', 'zfs_unload-key_recursive']
tags = ['functional', 'cli_root', 'zfs_unload-key']
[tests/functional/cli_root/zfs_unmount]
tests = ['zfs_unmount_001_pos', 'zfs_unmount_002_pos', 'zfs_unmount_003_pos',
'zfs_unmount_004_pos', 'zfs_unmount_007_neg', 'zfs_unmount_008_neg',
'zfs_unmount_009_pos', 'zfs_unmount_unload_keys']
tags = ['functional', 'cli_root', 'zfs_unmount']
[tests/functional/cli_root/zfs_upgrade]
tests = ['zfs_upgrade_001_pos', 'zfs_upgrade_002_pos', 'zfs_upgrade_006_neg',
'zfs_upgrade_007_neg']
tags = ['functional', 'cli_root', 'zfs_upgrade']
[tests/functional/cli_root/zfs_wait]
tests: validate getsubopt(3) expulsion Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #12996
2022-03-10 19:14:28 +00:00
tests = ['zfs_wait_deleteq', 'zfs_wait_getsubopt']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'cli_root', 'zfs_wait']
[tests/functional/cli_root/zpool]
tests = ['zpool_001_neg', 'zpool_003_pos', 'zpool_colors']
tags = ['functional', 'cli_root', 'zpool']
[tests/functional/cli_root/zpool_add]
tests = ['zpool_add_002_pos', 'zpool_add_003_pos',
'zpool_add_004_pos', 'zpool_add_006_pos', 'zpool_add_007_neg',
'zpool_add_008_neg', 'zpool_add_009_neg']
tags = ['functional', 'cli_root', 'zpool_add']
[tests/functional/cli_root/zpool_attach]
tests = ['zpool_attach_001_neg']
tags = ['functional', 'cli_root', 'zpool_attach']
[tests/functional/cli_root/zpool_clear]
tests = ['zpool_clear_002_neg']
tags = ['functional', 'cli_root', 'zpool_clear']
[tests/functional/cli_root/zpool_create]
tests = ['zpool_create_001_pos', 'zpool_create_002_pos',
'zpool_create_003_pos', 'zpool_create_004_pos', 'zpool_create_007_neg',
'zpool_create_008_pos', 'zpool_create_010_neg', 'zpool_create_011_neg',
'zpool_create_012_neg', 'zpool_create_014_neg', 'zpool_create_015_neg',
'zpool_create_017_neg', 'zpool_create_018_pos', 'zpool_create_019_pos',
'zpool_create_020_pos', 'zpool_create_021_pos', 'zpool_create_022_pos',
'zpool_create_encrypted',
'zpool_create_features_001_pos', 'zpool_create_features_002_pos',
'zpool_create_features_003_pos', 'zpool_create_features_004_neg',
'zpool_create_features_005_pos']
tags = ['functional', 'cli_root', 'zpool_create']
[tests/functional/cli_root/zpool_destroy]
tests = ['zpool_destroy_001_pos', 'zpool_destroy_002_pos',
'zpool_destroy_003_neg']
pre =
post =
tags = ['functional', 'cli_root', 'zpool_destroy']
[tests/functional/cli_root/zpool_detach]
tests = ['zpool_detach_001_neg']
tags = ['functional', 'cli_root', 'zpool_detach']
[tests/functional/cli_root/zpool_events]
tests = ['zpool_events_clear', 'zpool_events_follow', 'zpool_events_poolname']
tags = ['functional', 'cli_root', 'zpool_events']
[tests/functional/cli_root/zpool_export]
tests = ['zpool_export_001_pos', 'zpool_export_002_pos', 'zpool_export_003_neg']
tags = ['functional', 'cli_root', 'zpool_export']
[tests/functional/cli_root/zpool_get]
tests = ['zpool_get_001_pos', 'zpool_get_002_pos', 'zpool_get_003_pos',
'zpool_get_004_neg', 'zpool_get_005_pos']
tags = ['functional', 'cli_root', 'zpool_get']
[tests/functional/cli_root/zpool_history]
tests = ['zpool_history_001_neg', 'zpool_history_002_pos']
tags = ['functional', 'cli_root', 'zpool_history']
[tests/functional/cli_root/zpool_import]
tests = ['zpool_import_003_pos', 'zpool_import_010_pos', 'zpool_import_011_neg',
'zpool_import_014_pos', 'zpool_import_features_001_pos',
'zpool_import_all_001_pos', 'zpool_import_encrypted']
tags = ['functional', 'cli_root', 'zpool_import']
[tests/functional/cli_root/zpool_labelclear]
tests = ['zpool_labelclear_active', 'zpool_labelclear_exported',
'zpool_labelclear_removed', 'zpool_labelclear_valid']
pre =
post =
tags = ['functional', 'cli_root', 'zpool_labelclear']
[tests/functional/cli_root/zpool_initialize]
tests = ['zpool_initialize_online_offline']
pre =
tags = ['functional', 'cli_root', 'zpool_initialize']
[tests/functional/cli_root/zpool_offline]
tests = ['zpool_offline_001_pos', 'zpool_offline_002_neg']
tags = ['functional', 'cli_root', 'zpool_offline']
[tests/functional/cli_root/zpool_online]
tests = ['zpool_online_001_pos', 'zpool_online_002_neg']
tags = ['functional', 'cli_root', 'zpool_online']
[tests/functional/cli_root/zpool_remove]
tests = ['zpool_remove_001_neg', 'zpool_remove_002_pos',
'zpool_remove_003_pos']
tags = ['functional', 'cli_root', 'zpool_remove']
[tests/functional/cli_root/zpool_replace]
tests = ['zpool_replace_001_neg']
tags = ['functional', 'cli_root', 'zpool_replace']
[tests/functional/cli_root/zpool_resilver]
tests = ['zpool_resilver_bad_args']
tags = ['functional', 'cli_root', 'zpool_resilver']
[tests/functional/cli_root/zpool_scrub]
tests = ['zpool_scrub_001_neg', 'zpool_scrub_003_pos',
'zpool_scrub_encrypted_unloaded', 'zpool_scrub_print_repairing',
'zpool_scrub_offline_device', 'zpool_scrub_multiple_copies']
tags = ['functional', 'cli_root', 'zpool_scrub']
[tests/functional/cli_root/zpool_set]
tests = ['zpool_set_001_pos', 'zpool_set_002_neg', 'zpool_set_003_neg',
'zpool_set_ashift', 'zpool_set_features']
tags = ['functional', 'cli_root', 'zpool_set']
[tests/functional/cli_root/zpool_split]
tests = ['zpool_split_cliargs', 'zpool_split_devices',
'zpool_split_props', 'zpool_split_vdevs', 'zpool_split_indirect']
tags = ['functional', 'cli_root', 'zpool_split']
[tests/functional/cli_root/zpool_status]
tests = ['zpool_status_001_pos', 'zpool_status_002_pos']
tags = ['functional', 'cli_root', 'zpool_status']
[tests/functional/cli_root/zpool_sync]
tests = ['zpool_sync_002_neg']
tags = ['functional', 'cli_root', 'zpool_sync']
[tests/functional/cli_root/zpool_trim]
tests = ['zpool_trim_attach_detach_add_remove', 'zpool_trim_neg',
'zpool_trim_offline_export_import_online', 'zpool_trim_online_offline',
'zpool_trim_rate_neg', 'zpool_trim_secure', 'zpool_trim_split',
'zpool_trim_start_and_cancel_neg', 'zpool_trim_start_and_cancel_pos']
tags = ['functional', 'zpool_trim']
[tests/functional/cli_root/zpool_upgrade]
tests = ['zpool_upgrade_001_pos', 'zpool_upgrade_003_pos',
'zpool_upgrade_005_neg', 'zpool_upgrade_006_neg',
'zpool_upgrade_009_neg']
tags = ['functional', 'cli_root', 'zpool_upgrade']
[tests/functional/cli_root/zpool_wait]
tests = ['zpool_wait_no_activity', 'zpool_wait_usage']
tags = ['functional', 'cli_root', 'zpool_wait']
[tests/functional/cli_root/zpool_wait/scan]
tests = ['zpool_wait_scrub_flag']
tags = ['functional', 'cli_root', 'zpool_wait']
[tests/functional/cli_user/misc]
tests = ['zdb_001_neg', 'zfs_001_neg', 'zfs_allow_001_neg',
'zfs_clone_001_neg', 'zfs_create_001_neg', 'zfs_destroy_001_neg',
'zfs_get_001_neg', 'zfs_inherit_001_neg', 'zfs_mount_001_neg',
'zfs_promote_001_neg', 'zfs_receive_001_neg', 'zfs_rename_001_neg',
'zfs_rollback_001_neg', 'zfs_send_001_neg', 'zfs_set_001_neg',
'zfs_snapshot_001_neg', 'zfs_unallow_001_neg',
'zfs_unmount_001_neg', 'zfs_upgrade_001_neg',
'zpool_001_neg', 'zpool_add_001_neg', 'zpool_attach_001_neg',
'zpool_clear_001_neg', 'zpool_create_001_neg', 'zpool_destroy_001_neg',
'zpool_detach_001_neg', 'zpool_export_001_neg', 'zpool_get_001_neg',
'zpool_history_001_neg', 'zpool_offline_001_neg', 'zpool_online_001_neg',
'zpool_remove_001_neg', 'zpool_scrub_001_neg', 'zpool_set_001_neg',
'zpool_status_001_neg', 'zpool_upgrade_001_neg', 'arcstat_001_pos',
Add zilstat script to report zil kstats in a user friendly manner Added a python script to process both global and per dataset zil kstats and report them in a user friendly manner similar to arcstat and dbufstat. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com> Closes #13704
2022-09-02 20:24:07 +00:00
'arc_summary_001_pos', 'arc_summary_002_neg', 'zpool_wait_privilege',
'zilstat_001_pos']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
user =
tags = ['functional', 'cli_user', 'misc']
[tests/functional/cli_user/zpool_iostat]
tests = ['zpool_iostat_001_neg', 'zpool_iostat_002_pos',
'zpool_iostat_003_neg', 'zpool_iostat_004_pos',
'zpool_iostat_-c_disable',
'zpool_iostat_-c_homedir', 'zpool_iostat_-c_searchpath']
user =
tags = ['functional', 'cli_user', 'zpool_iostat']
[tests/functional/cli_user/zpool_list]
tests = ['zpool_list_001_pos', 'zpool_list_002_neg']
user =
tags = ['functional', 'cli_user', 'zpool_list']
[tests/functional/compression]
Added test for being able to read various variants of zstd As detailed in #12022 and #12008, it turns out the current zstd implementation is quite nonportable, and results in various configurations of ondisk header that only each platform can read. So I've added a test which contains a dataset with a file written by Linux/x86_64 and one written by FBSD/ppc64. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Rich Ercolani <rincebrain@gmail.com> Closes #12030
2021-09-20 15:08:20 +00:00
tests = ['compress_003_pos','compress_zstd_bswap']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'compression']
[tests/functional/exec]
tests = ['exec_001_pos', 'exec_002_neg']
tags = ['functional', 'exec']
[tests/functional/features/large_dnode]
tests = ['large_dnode_003_pos', 'large_dnode_004_neg',
'large_dnode_005_pos', 'large_dnode_007_neg']
tags = ['functional', 'features', 'large_dnode']
[tests/functional/grow]
pre =
post =
tests = ['grow_pool_001_pos', 'grow_replicas_001_pos']
tags = ['functional', 'grow']
[tests/functional/history]
Temporarily remove tests from sanity runfile With the addition of functionality to rerun failing tests, some tests that fail only sometimes still fail often enough to degrade the reliability of the sanity runs. Remove them from the runfile until they reliably pass. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Signed-off-by: John Kennedy <john.kennedy@delphix.com> Closes #12814
2021-12-01 21:22:52 +00:00
tests = ['history_004_pos', 'history_005_neg', 'history_007_pos',
'history_009_pos']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'history']
[tests/functional/hkdf]
tests: move C test helpers into test cmd Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13259
2022-03-22 19:09:35 +00:00
pre =
post =
tests = ['hkdf_test']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'hkdf']
[tests/functional/inuse]
tests = ['inuse_004_pos', 'inuse_005_pos']
post =
tags = ['functional', 'inuse']
[tests/functional/large_files]
tests = ['large_files_001_pos', 'large_files_002_pos']
tags = ['functional', 'large_files']
[tests/functional/libzfs]
tests = ['many_fds', 'libzfs_input']
tags = ['functional', 'libzfs']
[tests/functional/limits]
tests = ['filesystem_count', 'snapshot_count']
tags = ['functional', 'limits']
[tests/functional/link_count]
tests = ['link_count_root_inode']
tags = ['functional', 'link_count']
[tests/functional/log_spacemap]
tests = ['log_spacemap_import_logs']
pre =
post =
tags = ['functional', 'log_spacemap']
[tests/functional/migration]
tests = ['migration_001_pos', 'migration_002_pos', 'migration_003_pos',
'migration_004_pos', 'migration_005_pos', 'migration_006_pos',
'migration_007_pos', 'migration_008_pos', 'migration_009_pos',
'migration_010_pos', 'migration_011_pos', 'migration_012_pos']
tags = ['functional', 'migration']
[tests/functional/mmap]
tests = ['mmap_read_001_pos']
tags = ['functional', 'mmap']
[tests/functional/nestedfs]
tests = ['nestedfs_001_pos']
tags = ['functional', 'nestedfs']
[tests/functional/nopwrite]
tests = ['nopwrite_sync', 'nopwrite_volume']
tags = ['functional', 'nopwrite']
[tests/functional/pool_checkpoint]
tests = ['checkpoint_conf_change', 'checkpoint_discard_many',
'checkpoint_removal', 'checkpoint_sm_scale', 'checkpoint_twice']
tags = ['functional', 'pool_checkpoint']
timeout = 1800
[tests/functional/poolversion]
tests = ['poolversion_001_pos', 'poolversion_002_pos']
tags = ['functional', 'poolversion']
[tests/functional/redacted_send]
tests = ['redacted_compressed', 'redacted_contents', 'redacted_deleted',
'redacted_disabled_feature', 'redacted_incrementals',
'redacted_largeblocks', 'redacted_mixed_recsize', 'redacted_negative',
'redacted_origin', 'redacted_props', 'redacted_resume', 'redacted_size']
tags = ['functional', 'redacted_send']
[tests/functional/raidz]
tests = ['raidz_001_neg']
tags = ['functional', 'raidz']
[tests/functional/refquota]
tests = ['refquota_001_pos', 'refquota_002_pos', 'refquota_003_pos',
'refquota_004_pos', 'refquota_005_pos', 'refquota_006_neg',
'refquota_007_neg']
tags = ['functional', 'refquota']
[tests/functional/refreserv]
tests = ['refreserv_001_pos', 'refreserv_002_pos', 'refreserv_003_pos',
'refreserv_005_pos', 'refreserv_multi_raidz']
tags = ['functional', 'refreserv']
[tests/functional/removal]
pre =
tests = ['removal_all_vdev', 'removal_sanity', 'removal_with_dedup',
'removal_with_ganging', 'removal_with_faulted']
tags = ['functional', 'removal']
[tests/functional/replacement]
tests = ['rebuild_raidz']
tags = ['functional', 'replacement']
[tests/functional/reservation]
tests = ['reservation_001_pos', 'reservation_002_pos', 'reservation_003_pos',
'reservation_004_pos', 'reservation_005_pos', 'reservation_006_pos',
'reservation_007_pos', 'reservation_008_pos', 'reservation_009_pos',
'reservation_010_pos', 'reservation_011_pos', 'reservation_012_pos',
'reservation_014_pos', 'reservation_015_pos',
'reservation_016_pos', 'reservation_017_pos', 'reservation_018_pos',
'reservation_019_pos', 'reservation_020_pos', 'reservation_021_neg',
'reservation_022_pos']
tags = ['functional', 'reservation']
[tests/functional/rsend]
tests = ['recv_dedup', 'recv_dedup_encrypted_zvol', 'rsend_001_pos',
'rsend_002_pos', 'rsend_003_pos', 'rsend_004_pos', 'rsend_005_pos',
'rsend_006_pos', 'rsend_009_pos', 'rsend_010_pos', 'rsend_011_pos',
'rsend_014_pos', 'rsend_016_neg', 'send-c_verify_contents',
'send-c_volume', 'send-c_zstreamdump', 'send-c_recv_dedup',
'send-L_toggle', 'send_encrypted_hierarchy', 'send_encrypted_props',
Wait for txg sync if the last DRR_FREEOBJECTS might result in a hole If we receive a DRR_FREEOBJECTS as the first entry in an object range, this might end up producing a hole if the freed objects were the only existing objects in the block. If the txg starts syncing before we've processed any following DRR_OBJECT records, this leads to a possible race where the backing arc_buf_t gets its psize set to 0 in the arc_write_ready() callback while still being referenced from a dirty record in the open txg. To prevent this, we insert a txg_wait_synced call if the first record in the range was a DRR_FREEOBJECTS that actually resulted in one or more freed objects. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: David Hedberg <david.hedberg@findity.com> Sponsored by: Findity AB Closes #11893 Closes #14358
2023-01-23 21:19:43 +00:00
'send_encrypted_freeobjects',
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
'send_encrypted_truncated_files', 'send_freeobjects', 'send_holds',
'send_mixed_raw', 'send-wR_encrypted_zvol', 'send_partial_dataset',
'send_invalid']
tags = ['functional', 'rsend']
[tests/functional/scrub_mirror]
tests = ['scrub_mirror_001_pos', 'scrub_mirror_002_pos']
tags = ['functional', 'scrub_mirror']
[tests/functional/slog]
tests = ['slog_008_neg', 'slog_009_neg', 'slog_010_neg']
tags = ['functional', 'slog']
[tests/functional/snapshot]
tests = ['clone_001_pos', 'rollback_001_pos', 'rollback_002_pos',
Temporarily remove tests from sanity runfile With the addition of functionality to rerun failing tests, some tests that fail only sometimes still fail often enough to degrade the reliability of the sanity runs. Remove them from the runfile until they reliably pass. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Signed-off-by: John Kennedy <john.kennedy@delphix.com> Closes #12814
2021-12-01 21:22:52 +00:00
'snapshot_001_pos', 'snapshot_002_pos', 'snapshot_003_pos',
'snapshot_004_pos', 'snapshot_005_pos', 'snapshot_006_pos',
'snapshot_007_pos', 'snapshot_008_pos', 'snapshot_009_pos',
'snapshot_010_pos', 'snapshot_011_pos', 'snapshot_012_pos',
Add snapshots_changed as property Make dd_snap_cmtime property persistent across mount and unmount operations by storing in ZAP and restore the value from ZAP on hold into dd_snap_cmtime instead of updating it. Expose dd_snap_cmtime as 'snapshots_changed' property that provides a mechanism to quickly determine whether snapshot list for dataset has changed without having to mount a dataset or iterate the snapshot list. It specifies the time at which a snapshot for a dataset was last created or deleted. This allows us to be more efficient how often we query snapshots. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Umer Saleem <usaleem@ixsystems.com> Closes #13635
2022-08-02 23:45:30 +00:00
'snapshot_013_pos', 'snapshot_014_pos', 'snapshot_017_pos',
'snapshot_018_pos']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'snapshot']
[tests/functional/snapused]
tests = ['snapused_002_pos', 'snapused_004_pos', 'snapused_005_pos']
tags = ['functional', 'snapused']
[tests/functional/sparse]
tests = ['sparse_001_pos']
tags = ['functional', 'sparse']
[tests/functional/suid]
tests = ['suid_write_to_suid', 'suid_write_to_sgid', 'suid_write_to_suid_sgid',
'suid_write_to_none']
tags = ['functional', 'suid']
Adding ZTS test for O_APPEND Commit 63b18e4 fixed an issue in zpl_aio_write() to make sure that kiocb->ki_pos was updated correctly when opening a file with O_APPEND. Adding a test to verify O_APPEND functionality with lseek can make sure that all other distros/kernel versions also have the correct behavior. Also moved the threadappends_001_pos test into this append test directory in functional ZTS directory. This way the two append tests are together for organization purposes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Brian Atkinson <batkinson@lanl.gov> Closes #13424
2022-05-11 15:38:16 +00:00
[tests/functional/append]
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tests = ['threadsappend_001_pos']
tags = ['functional', 'threadsappend']
[tests/functional/truncate]
tests = ['truncate_001_pos', 'truncate_002_pos']
tags = ['functional', 'truncate']
[tests/functional/upgrade]
tests = ['upgrade_userobj_001_pos', 'upgrade_readonly_pool']
tags = ['functional', 'upgrade']
[tests/functional/vdev_zaps]
tests = ['vdev_zaps_001_pos', 'vdev_zaps_003_pos', 'vdev_zaps_004_pos',
'vdev_zaps_005_pos', 'vdev_zaps_006_pos']
tags = ['functional', 'vdev_zaps']
[tests/functional/xattr]
tests = ['xattr_001_pos', 'xattr_002_neg', 'xattr_003_neg', 'xattr_004_pos',
'xattr_005_pos', 'xattr_006_pos', 'xattr_007_neg',
Cross-platform xattr user namespace compatibility ZFS on Linux originally implemented xattr namespaces in a way that is incompatible with other operating systems. On illumos, xattrs do not have namespaces. Every xattr name is visible. FreeBSD has two universally defined namespaces: EXTATTR_NAMESPACE_USER and EXTATTR_NAMESPACE_SYSTEM. The system namespace is used for protected FreeBSD-specific attributes such as MAC labels and pnfs state. These attributes have the namespace string "freebsd:system:" prefixed to the name in the encoding scheme used by ZFS. The user namespace is used for general purpose user attributes and obeys normal access control mechanisms. These attributes have no namespace string prefixed, so xattrs written on illumos are accessible in the user namespace on FreeBSD, and xattrs written to the user namespace on FreeBSD are accessible by the same name on illumos. Linux has several xattr namespaces. On Linux, ZFS encodes the namespace in the xattr name for every namespace, including the user namespace. As a consequence, an xattr in the user namespace with the name "foo" is stored by ZFS with the name "user.foo" and therefore appears on FreeBSD and illumos to have the name "user.foo" rather than "foo". Conversely, none of the xattrs written on FreeBSD or illumos are accessible on Linux unless the name happens to be prefixed with one of the Linux xattr namespaces, in which case the namespace is stripped from the name. This makes xattrs entirely incompatible between Linux and other platforms. We want to make the encoding of user namespace xattrs compatible across platforms. A critical requirement of this compatibility is for xattrs from existing pools from FreeBSD and illumos to be accessible by the same names in the user namespace on Linux. It is also necessary that existing pools with xattrs written by Linux retain access to those xattrs by the same names on Linux. Making user namespace xattrs from Linux accessible by the correct names on other platforms is important. The handling of other namespaces is not required to be consistent. Add a fallback mechanism for listing and getting xattrs to treat xattrs as being in the user namespace if they do not match a known prefix. Do not allow setting or getting xattrs with a name that is prefixed with one of the namespace names used by ZFS on supported platforms. Allow choosing between legacy illumos and FreeBSD compatibility and legacy Linux compatibility with a new tunable. This facilitates replication and migration of pools between hosts with different compatibility needs. The tunable controls whether or not to prefix the namespace to the name. If the xattr is already present with the alternate prefix, remove it so only the new version persists. By default the platform's existing convention is used. Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #11919
2022-02-16 00:35:30 +00:00
'xattr_011_pos', 'xattr_013_pos', 'xattr_compat']
Add sanity.run file This run file contains a subset of functional tests which exercise as much functionality as possible while still executing relatively quickly. The included tests should take no more than a few seconds each to run at most. This provides a convenient way to sanity test a change before committing to a full test run which takes several hours. $ ./scripts/zfs-tests.sh -r sanity ... Results Summary PASS 813 Running Time: 00:14:42 Percent passed: 100.0% Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11271
2020-12-03 18:49:39 +00:00
tags = ['functional', 'xattr']
[tests/functional/zvol/zvol_ENOSPC]
tests = ['zvol_ENOSPC_001_pos']
tags = ['functional', 'zvol', 'zvol_ENOSPC']
[tests/functional/zvol/zvol_cli]
tests = ['zvol_cli_001_pos', 'zvol_cli_002_pos', 'zvol_cli_003_neg']
tags = ['functional', 'zvol', 'zvol_cli']
[tests/functional/zvol/zvol_swap]
tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos']
tags = ['functional', 'zvol', 'zvol_swap']
[tests/functional/zpool_influxdb]
tests = ['zpool_influxdb']
tags = ['functional', 'zpool_influxdb']
Python3: replace `distutils` with `sysconfig` - `distutils` module is long time deprecated and already deleted from the CPython mainline. - To remain compatible with Debian/Ubuntu Python3 packaging style, try `distutils.sysconfig.get_python_path(0,0)` first with fallback on `sysconfig.get_path('purelib')` - pyzfs_unittest suite is run unconditionally as a part of ZTS. - Add pyzfs_unittest suite to sanity tests. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #12833 Closes #13280 Closes #14177
2022-11-28 19:39:41 +00:00
[tests/functional/pyzfs]
tests = ['pyzfs_unittest']
ZTS: Add missing tests to Makefile.am The send-c_zstream_recompress.ksh test case was being skipped because it was not added to the Makefile.am, and was thus left out of the package. As for the renameat2 tests these were being skipped because when the patch was rebased it was not updated to use the new Makefile layout for the tests directory. Correct this. Add missing pre/post sections to sanity.run so the pyzfs tests will run. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #14266
2022-12-08 01:26:33 +00:00
pre =
post =
Python3: replace `distutils` with `sysconfig` - `distutils` module is long time deprecated and already deleted from the CPython mainline. - To remain compatible with Debian/Ubuntu Python3 packaging style, try `distutils.sysconfig.get_python_path(0,0)` first with fallback on `sysconfig.get_path('purelib')` - pyzfs_unittest suite is run unconditionally as a part of ZTS. - Add pyzfs_unittest suite to sanity tests. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #12833 Closes #13280 Closes #14177
2022-11-28 19:39:41 +00:00
tags = ['functional', 'pyzfs']