zfs/lib/libzpool/taskq.c

387 lines
8.9 KiB
C
Raw Permalink Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
2008-11-20 20:01:55 +00:00
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2010 Sun Microsystems, Inc. All rights reserved.
2008-11-20 20:01:55 +00:00
* Use is subject to license terms.
*/
/*
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
* Copyright 2012 Garrett D'Amore <garrett@damore.org>. All rights reserved.
* Copyright (c) 2014 by Delphix. All rights reserved.
*/
2008-11-20 20:01:55 +00:00
#include <sys/zfs_context.h>
int taskq_now;
taskq_t *system_taskq;
taskq_t *system_delay_taskq;
2008-11-20 20:01:55 +00:00
static pthread_key_t taskq_tsd;
2008-11-20 20:01:55 +00:00
#define TASKQ_ACTIVE 0x00010000
static taskq_ent_t *
2008-11-20 20:01:55 +00:00
task_alloc(taskq_t *tq, int tqflags)
{
taskq_ent_t *t;
int rv;
2008-11-20 20:01:55 +00:00
again: if ((t = tq->tq_freelist) != NULL && tq->tq_nalloc >= tq->tq_minalloc) {
ASSERT(!(t->tqent_flags & TQENT_FLAG_PREALLOC));
tq->tq_freelist = t->tqent_next;
2008-11-20 20:01:55 +00:00
} else {
if (tq->tq_nalloc >= tq->tq_maxalloc) {
if (!(tqflags & KM_SLEEP))
2008-11-20 20:01:55 +00:00
return (NULL);
2008-11-20 20:01:55 +00:00
/*
* We don't want to exceed tq_maxalloc, but we can't
* wait for other tasks to complete (and thus free up
* task structures) without risking deadlock with
* the caller. So, we just delay for one second
* to throttle the allocation rate. If we have tasks
* complete before one second timeout expires then
* taskq_ent_free will signal us and we will
* immediately retry the allocation.
2008-11-20 20:01:55 +00:00
*/
tq->tq_maxalloc_wait++;
rv = cv_timedwait(&tq->tq_maxalloc_cv,
&tq->tq_lock, ddi_get_lbolt() + hz);
tq->tq_maxalloc_wait--;
if (rv > 0)
goto again; /* signaled */
2008-11-20 20:01:55 +00:00
}
mutex_exit(&tq->tq_lock);
t = kmem_alloc(sizeof (taskq_ent_t), tqflags);
2008-11-20 20:01:55 +00:00
mutex_enter(&tq->tq_lock);
if (t != NULL) {
/* Make sure we start without any flags */
t->tqent_flags = 0;
2008-11-20 20:01:55 +00:00
tq->tq_nalloc++;
}
2008-11-20 20:01:55 +00:00
}
return (t);
}
static void
task_free(taskq_t *tq, taskq_ent_t *t)
2008-11-20 20:01:55 +00:00
{
if (tq->tq_nalloc <= tq->tq_minalloc) {
t->tqent_next = tq->tq_freelist;
2008-11-20 20:01:55 +00:00
tq->tq_freelist = t;
} else {
tq->tq_nalloc--;
mutex_exit(&tq->tq_lock);
kmem_free(t, sizeof (taskq_ent_t));
2008-11-20 20:01:55 +00:00
mutex_enter(&tq->tq_lock);
}
if (tq->tq_maxalloc_wait)
cv_signal(&tq->tq_maxalloc_cv);
2008-11-20 20:01:55 +00:00
}
taskqid_t
taskq_dispatch(taskq_t *tq, task_func_t func, void *arg, uint_t tqflags)
{
taskq_ent_t *t;
2008-11-20 20:01:55 +00:00
if (taskq_now) {
func(arg);
return (1);
}
mutex_enter(&tq->tq_lock);
ASSERT(tq->tq_flags & TASKQ_ACTIVE);
if ((t = task_alloc(tq, tqflags)) == NULL) {
mutex_exit(&tq->tq_lock);
return (0);
}
if (tqflags & TQ_FRONT) {
t->tqent_next = tq->tq_task.tqent_next;
t->tqent_prev = &tq->tq_task;
} else {
t->tqent_next = &tq->tq_task;
t->tqent_prev = tq->tq_task.tqent_prev;
}
t->tqent_next->tqent_prev = t;
t->tqent_prev->tqent_next = t;
t->tqent_func = func;
t->tqent_arg = arg;
t->tqent_flags = 0;
2008-11-20 20:01:55 +00:00
cv_signal(&tq->tq_dispatch_cv);
mutex_exit(&tq->tq_lock);
return (1);
}
taskqid_t
taskq_dispatch_delay(taskq_t *tq, task_func_t func, void *arg, uint_t tqflags,
clock_t expire_time)
{
(void) tq, (void) func, (void) arg, (void) tqflags, (void) expire_time;
return (0);
}
int
taskq_empty_ent(taskq_ent_t *t)
{
return (t->tqent_next == NULL);
}
void
taskq_init_ent(taskq_ent_t *t)
{
t->tqent_next = NULL;
t->tqent_prev = NULL;
t->tqent_func = NULL;
t->tqent_arg = NULL;
t->tqent_flags = 0;
}
void
taskq_dispatch_ent(taskq_t *tq, task_func_t func, void *arg, uint_t flags,
taskq_ent_t *t)
{
ASSERT(func != NULL);
/*
* Mark it as a prealloc'd task. This is important
* to ensure that we don't free it later.
*/
t->tqent_flags |= TQENT_FLAG_PREALLOC;
/*
* Enqueue the task to the underlying queue.
*/
mutex_enter(&tq->tq_lock);
if (flags & TQ_FRONT) {
t->tqent_next = tq->tq_task.tqent_next;
t->tqent_prev = &tq->tq_task;
} else {
t->tqent_next = &tq->tq_task;
t->tqent_prev = tq->tq_task.tqent_prev;
}
t->tqent_next->tqent_prev = t;
t->tqent_prev->tqent_next = t;
t->tqent_func = func;
t->tqent_arg = arg;
cv_signal(&tq->tq_dispatch_cv);
mutex_exit(&tq->tq_lock);
}
2008-11-20 20:01:55 +00:00
void
taskq_wait(taskq_t *tq)
{
mutex_enter(&tq->tq_lock);
while (tq->tq_task.tqent_next != &tq->tq_task || tq->tq_active != 0)
2008-11-20 20:01:55 +00:00
cv_wait(&tq->tq_wait_cv, &tq->tq_lock);
mutex_exit(&tq->tq_lock);
}
void
taskq_wait_id(taskq_t *tq, taskqid_t id)
{
(void) id;
taskq_wait(tq);
}
void
taskq_wait_outstanding(taskq_t *tq, taskqid_t id)
{
(void) id;
taskq_wait(tq);
}
static __attribute__((noreturn)) void
2008-11-20 20:01:55 +00:00
taskq_thread(void *arg)
{
taskq_t *tq = arg;
taskq_ent_t *t;
boolean_t prealloc;
2008-11-20 20:01:55 +00:00
VERIFY0(pthread_setspecific(taskq_tsd, tq));
2008-11-20 20:01:55 +00:00
mutex_enter(&tq->tq_lock);
while (tq->tq_flags & TASKQ_ACTIVE) {
if ((t = tq->tq_task.tqent_next) == &tq->tq_task) {
2008-11-20 20:01:55 +00:00
if (--tq->tq_active == 0)
cv_broadcast(&tq->tq_wait_cv);
cv_wait(&tq->tq_dispatch_cv, &tq->tq_lock);
tq->tq_active++;
continue;
}
t->tqent_prev->tqent_next = t->tqent_next;
t->tqent_next->tqent_prev = t->tqent_prev;
t->tqent_next = NULL;
t->tqent_prev = NULL;
prealloc = t->tqent_flags & TQENT_FLAG_PREALLOC;
2008-11-20 20:01:55 +00:00
mutex_exit(&tq->tq_lock);
rw_enter(&tq->tq_threadlock, RW_READER);
t->tqent_func(t->tqent_arg);
2008-11-20 20:01:55 +00:00
rw_exit(&tq->tq_threadlock);
mutex_enter(&tq->tq_lock);
if (!prealloc)
task_free(tq, t);
2008-11-20 20:01:55 +00:00
}
tq->tq_nthreads--;
cv_broadcast(&tq->tq_wait_cv);
mutex_exit(&tq->tq_lock);
thread_exit();
2008-11-20 20:01:55 +00:00
}
taskq_t *
taskq_create(const char *name, int nthreads, pri_t pri,
int minalloc, int maxalloc, uint_t flags)
2008-11-20 20:01:55 +00:00
{
(void) pri;
2008-11-20 20:01:55 +00:00
taskq_t *tq = kmem_zalloc(sizeof (taskq_t), KM_SLEEP);
int t;
2009-07-02 22:44:48 +00:00
if (flags & TASKQ_THREADS_CPU_PCT) {
int pct;
ASSERT3S(nthreads, >=, 0);
ASSERT3S(nthreads, <=, 100);
pct = MIN(nthreads, 100);
pct = MAX(pct, 0);
nthreads = (sysconf(_SC_NPROCESSORS_ONLN) * pct) / 100;
nthreads = MAX(nthreads, 1); /* need at least 1 thread */
} else {
ASSERT3S(nthreads, >=, 1);
}
2008-11-20 20:01:55 +00:00
rw_init(&tq->tq_threadlock, NULL, RW_DEFAULT, NULL);
mutex_init(&tq->tq_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&tq->tq_dispatch_cv, NULL, CV_DEFAULT, NULL);
cv_init(&tq->tq_wait_cv, NULL, CV_DEFAULT, NULL);
cv_init(&tq->tq_maxalloc_cv, NULL, CV_DEFAULT, NULL);
Cleanup: Switch to strlcpy from strncpy Coverity found a bug in `zfs_secpolicy_create_clone()` where it is possible for us to pass an unterminated string when `zfs_get_parent()` returns an error. Upon inspection, it is clear that using `strlcpy()` would have avoided this issue. Looking at the codebase, there are a number of other uses of `strncpy()` that are unsafe and even when it is used safely, switching to `strlcpy()` would make the code more readable. Therefore, we switch all instances where we use `strncpy()` to use `strlcpy()`. Unfortunately, we do not portably have access to `strlcpy()` in tests/zfs-tests/cmd/zfs_diff-socket.c because it does not link to libspl. Modifying the appropriate Makefile.am to try to link to it resulted in an error from the naming choice used in the file. Trying to disable the check on the file did not work on FreeBSD because Clang ignores `#undef` when a definition is provided by `-Dstrncpy(...)=...`. We workaround that by explictly including the C file from libspl into the test. This makes things build correctly everywhere. We add a deprecation warning to `config/Rules.am` and suppress it on the remaining `strncpy()` usage. `strlcpy()` is not portably avaliable in tests/zfs-tests/cmd/zfs_diff-socket.c, so we use `snprintf()` there as a substitute. This patch does not tackle the related problem of `strcpy()`, which is even less safe. Thankfully, a quick inspection found that it is used far more correctly than strncpy() was used. A quick inspection did not find any problems with `strcpy()` usage outside of zhack, but it should be said that I only checked around 90% of them. Lastly, some of the fields in kstat_t varied in size by 1 depending on whether they were in userspace or in the kernel. The origin of this discrepancy appears to be 04a479f7066ccdaa23a6546955303b172f4a6909 where it was made for no apparent reason. It conflicts with the comment on KSTAT_STRLEN, so we shrink the kernel field sizes to match the userspace field sizes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13876
2022-09-27 23:35:29 +00:00
(void) strlcpy(tq->tq_name, name, sizeof (tq->tq_name));
2008-11-20 20:01:55 +00:00
tq->tq_flags = flags | TASKQ_ACTIVE;
tq->tq_active = nthreads;
tq->tq_nthreads = nthreads;
tq->tq_minalloc = minalloc;
tq->tq_maxalloc = maxalloc;
tq->tq_task.tqent_next = &tq->tq_task;
tq->tq_task.tqent_prev = &tq->tq_task;
tq->tq_threadlist = kmem_alloc(nthreads * sizeof (kthread_t *),
KM_SLEEP);
2008-11-20 20:01:55 +00:00
if (flags & TASKQ_PREPOPULATE) {
mutex_enter(&tq->tq_lock);
while (minalloc-- > 0)
task_free(tq, task_alloc(tq, KM_SLEEP));
mutex_exit(&tq->tq_lock);
}
for (t = 0; t < nthreads; t++)
VERIFY((tq->tq_threadlist[t] = thread_create(NULL, 0,
taskq_thread, tq, 0, &p0, TS_RUN, pri)) != NULL);
2008-11-20 20:01:55 +00:00
return (tq);
}
void
taskq_destroy(taskq_t *tq)
{
int nthreads = tq->tq_nthreads;
taskq_wait(tq);
mutex_enter(&tq->tq_lock);
tq->tq_flags &= ~TASKQ_ACTIVE;
cv_broadcast(&tq->tq_dispatch_cv);
while (tq->tq_nthreads != 0)
cv_wait(&tq->tq_wait_cv, &tq->tq_lock);
tq->tq_minalloc = 0;
while (tq->tq_nalloc != 0) {
ASSERT(tq->tq_freelist != NULL);
taskq_ent_t *tqent_nexttq = tq->tq_freelist->tqent_next;
task_free(tq, tq->tq_freelist);
tq->tq_freelist = tqent_nexttq;
2008-11-20 20:01:55 +00:00
}
mutex_exit(&tq->tq_lock);
kmem_free(tq->tq_threadlist, nthreads * sizeof (kthread_t *));
2008-11-20 20:01:55 +00:00
rw_destroy(&tq->tq_threadlock);
mutex_destroy(&tq->tq_lock);
cv_destroy(&tq->tq_dispatch_cv);
cv_destroy(&tq->tq_wait_cv);
cv_destroy(&tq->tq_maxalloc_cv);
2008-11-20 20:01:55 +00:00
kmem_free(tq, sizeof (taskq_t));
}
int
taskq_member(taskq_t *tq, kthread_t *t)
2008-11-20 20:01:55 +00:00
{
int i;
if (taskq_now)
return (1);
for (i = 0; i < tq->tq_nthreads; i++)
if (tq->tq_threadlist[i] == t)
2008-11-20 20:01:55 +00:00
return (1);
return (0);
}
taskq_t *
taskq_of_curthread(void)
{
return (pthread_getspecific(taskq_tsd));
}
int
taskq_cancel_id(taskq_t *tq, taskqid_t id)
{
(void) tq, (void) id;
return (ENOENT);
}
void
system_taskq_init(void)
{
VERIFY0(pthread_key_create(&taskq_tsd, NULL));
Align thread priority with Linux defaults Under Linux filesystem threads responsible for handling I/O are normally created with the maximum priority. Non-I/O filesystem processes run with the default priority. ZFS should adopt the same priority scheme under Linux to maintain good performance and so that it will complete fairly when other Linux filesystems are active. The priorities have been updated to the following: $ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta' - TS 10743 19 -20 [spl_kmem_cache] - TS 10744 19 -20 [spl_system_task] - TS 10745 19 -20 [spl_dynamic_tas] - TS 10764 19 0 [dbu_evict] - TS 10765 19 0 [arc_prune] - TS 10766 19 0 [arc_reclaim] - TS 10767 19 0 [arc_user_evicts] - TS 10768 19 0 [l2arc_feed] - TS 10769 39 0 [z_unmount] - TS 10770 39 -20 [zvol] - TS 11011 39 -20 [z_null_iss] - TS 11012 39 -20 [z_null_int] - TS 11013 39 -20 [z_rd_iss] - TS 11014 39 -20 [z_rd_int_0] - TS 11022 38 -19 [z_wr_iss] - TS 11023 39 -20 [z_wr_iss_h] - TS 11024 39 -20 [z_wr_int_0] - TS 11032 39 -20 [z_wr_int_h] - TS 11033 39 -20 [z_fr_iss_0] - TS 11041 39 -20 [z_fr_int] - TS 11042 39 -20 [z_cl_iss] - TS 11043 39 -20 [z_cl_int] - TS 11044 39 -20 [z_ioctl_iss] - TS 11045 39 -20 [z_ioctl_int] - TS 11046 39 -20 [metaslab_group_] - TS 11050 19 0 [z_iput] - TS 11121 38 -19 [z_wr_iss] Note that under Linux the meaning of a processes priority is inverted with respect to illumos. High values on Linux indicate a _low_ priority while high value on illumos indicate a _high_ priority. In order to preserve the logical meaning of the minclsyspri and maxclsyspri macros when they are used by the illumos wrapper functions their values have been inverted. This way when changes are merged from upstream illumos we won't need to remember to invert the macro. It could also lead to confusion. This patch depends on https://github.com/zfsonlinux/spl/pull/466. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #3607
2015-07-24 17:08:31 +00:00
system_taskq = taskq_create("system_taskq", 64, maxclsyspri, 4, 512,
TASKQ_DYNAMIC | TASKQ_PREPOPULATE);
system_delay_taskq = taskq_create("delay_taskq", 4, maxclsyspri, 4,
512, TASKQ_DYNAMIC | TASKQ_PREPOPULATE);
}
void
system_taskq_fini(void)
{
taskq_destroy(system_taskq);
system_taskq = NULL; /* defensive */
taskq_destroy(system_delay_taskq);
system_delay_taskq = NULL;
VERIFY0(pthread_key_delete(taskq_tsd));
}