87 lines
2.4 KiB
Bash
87 lines
2.4 KiB
Bash
#!/bin/bash
|
|
#
|
|
# Zpool Raid-10 Configuration
|
|
#
|
|
# This script is used to simplify testing with the /dev/disk/zpool/[A-Z][1-n]
|
|
# devices. It assumes that you have already populated /dev/disk/zpool/ by
|
|
# creating an /etc/zfs/zdev.conf file based on your system design. You may
|
|
# use the zpool_layout command or manually create your own config file.
|
|
#
|
|
# You can then use either the zpool-create.sh or the zpios.sh test script to
|
|
# test various Raid-10 configurations by adjusting the following tunables.
|
|
# For example if you wanted to create and test a single 4-disk Raid-10
|
|
# configuration using disks [A-D]1 with dedicated ZIL and L2ARC devices
|
|
# you could run the following.
|
|
#
|
|
# ZIL="log A2" L2ARC="cache B2" RANKS=1 CHANNELS=4 \
|
|
# zpool-create.sh -c zpool-raid10
|
|
#
|
|
# zpool status tank
|
|
# pool: tank
|
|
# state: ONLINE
|
|
# scan: none requested
|
|
# config:
|
|
#
|
|
# NAME STATE READ WRITE CKSUM
|
|
# tank ONLINE 0 0 0
|
|
# mirror-0 ONLINE 0 0 0
|
|
# A1 ONLINE 0 0 0
|
|
# B1 ONLINE 0 0 0
|
|
# mirror-1 ONLINE 0 0 0
|
|
# C1 ONLINE 0 0 0
|
|
# D1 ONLINE 0 0 0
|
|
# logs
|
|
# A2 ONLINE 0 0 0
|
|
# cache
|
|
# B2 ONLINE 0 0 0
|
|
#
|
|
# errors: No known data errors
|
|
#
|
|
|
|
# Number of interior vdevs to create using the following rank ids.
|
|
RANKS=${RANKS:-1}
|
|
RANK_LIST=( 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 )
|
|
|
|
# Number of devices per vdev using the following channel ids.
|
|
CHANNELS=${CHANNELS:-8}
|
|
CHANNEL_LIST=( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z )
|
|
|
|
# Create a ZIL vdev as follows.
|
|
ZIL=${ZIL:-}
|
|
|
|
# Create an L2ARC vdev as follows.
|
|
L2ARC=${L2ARC:-}
|
|
|
|
|
|
raid10_setup() {
|
|
local RANKS=$1
|
|
local CHANNELS=$2
|
|
local IDX=0
|
|
|
|
RAID10S=()
|
|
for (( i=0, l=0 ; i<${RANKS}; i++ )); do
|
|
RANK=${RANK_LIST[$i]}
|
|
|
|
for (( j=0, k=1; j<${CHANNELS}; j+=2,k+=2,l++ )); do
|
|
DISK1="${CHANNEL_LIST[$j]}${RANK}"
|
|
DISK2="${CHANNEL_LIST[$k]}${RANK}"
|
|
RAID10S[$l]="mirror ${DISK1} ${DISK2}"
|
|
done
|
|
done
|
|
|
|
return 0
|
|
}
|
|
|
|
zpool_create() {
|
|
raid10_setup ${RANKS} ${CHANNELS}
|
|
|
|
ZPOOL_DEVICES="${RAID10S[*]} ${ZIL} ${L2ARC}"
|
|
msg ${ZPOOL} create ${FORCE_FLAG} ${ZPOOL_NAME} ${ZPOOL_DEVICES}
|
|
${ZPOOL} create ${FORCE_FLAG} ${ZPOOL_NAME} ${ZPOOL_DEVICES} || exit 1
|
|
}
|
|
|
|
zpool_destroy() {
|
|
msg ${ZPOOL} destroy ${ZPOOL_NAME}
|
|
${ZPOOL} destroy ${ZPOOL_NAME}
|
|
}
|