df30f56639
Some disks with internal sectors larger than 512 bytes (e.g., 4k) can suffer from bad write performance when ashift is not configured correctly. This is caused by the disk not reporting its actual sector size, but a sector size of 512 bytes. The drive may behave this way for compatibility reasons. For example, the WDC WD20EARS disks are known to exhibit this behavior. When creating a zpool, ZFS takes that wrong sector size and sets the "ashift" property accordingly (to 9: 1<<9=512), whereas it should be set to 12 for 4k sectors (1<<12=4096). This patch allows an adminstrator to manual specify the known correct ashift size at 'zpool create' time. This can significantly improve performance in certain cases. However, it will have an impact on your total pool capacity. See the updated ashift property description in the zpool.8 man page for additional details. Valid values for the ashift property range from 9 to 17 (512B-128KB). Additionally, you may set the ashift to 0 if you wish to auto-detect the sector size based on what the disk reports, this is the default behavior. The most common ashift values are 9 and 12. Example: zpool create -o ashift=12 tank raidz2 sda sdb sdc sdd Closes #280 Original-patch-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> |
||
|---|---|---|
| .. | ||
| avl | ||
| nvpair | ||
| unicode | ||
| zcommon | ||
| zfs | ||
| zpios | ||
| .gitignore | ||
| Makefile.in | ||