#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#

#
# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#

#
# Copyright (c) 2016 by Delphix. All rights reserved.
#

. $STF_SUITE/include/commands.cfg

# Common paths
bindir=@bindir@
sbindir=@sbindir@

# ZFS Commands
export ZDB=${ZDB:-${sbindir}/zdb}
export ZFS=${ZFS:-${sbindir}/zfs}
export ZHACK=${ZHACK:-${sbindir}/zhack}
export ZINJECT=${ZINJECT:-${sbindir}/zinject}
export ZPOOL=${ZPOOL:-${sbindir}/zpool}
export ZTEST=${ZTEST:-${sbindir}/ztest}
export ZPIOS=${ZPIOS:-${sbindir}/zpios}
export RAIDZ_TEST=${RAIDZ_TEST:-${bindir}/raidz_test}

. $STF_SUITE/include/libtest.shlib

# Optionally override the installed ZFS commands to run in-tree
if [[ -f "$STF_SUITE/include/zfs_commands.cfg" ]]; then
	. $STF_SUITE/include/zfs_commands.cfg
fi

# Define run length constants
export RT_LONG="3"
export RT_MEDIUM="2"
export RT_SHORT="1"

# Define macro for zone test
export ZONE_POOL="zonepool"
export ZONE_CTR="zonectr"

# Test Suite Specific Commands
helperdir=@datarootdir@/@PACKAGE@/zfs-tests/bin
export CHG_USR_EXEC=${CHG_USR_EXEC:-${helperdir}/chg_usr_exec}
export DEVNAME2DEVID=${DEVNAME2DEVID:-${helperdir}/devname2devid}
export DIR_RD_UPDATE=${DIR_RD_UPDATE:-${helperdir}/dir_rd_update}
export FILE_CHECK=${FILE_CHECK:-${helperdir}/file_check}
export FILE_TRUNC=${FILE_TRUNC:-${helperdir}/file_trunc}
export FILE_WRITE=${FILE_WRITE:-${helperdir}/file_write}
export LARGEST_FILE=${LARGEST_FILE:-${helperdir}/largest_file}
export MKBUSY=${MKBUSY:-${helperdir}/mkbusy}
export MKFILE=${MKFILE:-${helperdir}/mkfile}
export MKFILES=${MKFILES:-${helperdir}/mkfiles}
export MKTREE=${MKTREE:-${helperdir}/mktree}
export MMAP_EXEC=${MMAP_EXEC:-${helperdir}/mmap_exec}
export MMAPWRITE=${MMAPWRITE:-${helperdir}/mmapwrite}
export RANDFREE_FILE=${RANDFREE_FILE:-${helperdir}/randfree_file}
export READMMAP=${READMMAP:-${helperdir}/readmmap}
export RENAME_DIR=${RENAME_DIR:-${helperdir}/rename_dir}
export RM_LNKCNT_ZERO_FILE=${RM_LNKCNT_ZERO_FILE:-${helperdir}/rm_lnkcnt_zero_file}
export THREADSAPPEND=${THREADSAPPEND:-${helperdir}/threadsappend}
export XATTRTEST=${XATTRTEST:-${helpdir}/xattrtest}

# ensure we're running in the C locale, since
# localised messages may result in test failures
export LC_ALL="C"
export LANG="C"

#
# pattern to ignore from 'zpool list'.
#
export NO_POOLS="no pools available"

# pattern to ignore from 'zfs list'.
export NO_DATASETS="no datasets available"

export TEST_BASE_DIR="/var/tmp"

# Default to compression ON
export COMPRESSION_PROP=on

# Default to using the checksum
export CHECKSUM_PROP=on

# some common variables used by test scripts :

# some test pool names
export TESTPOOL=testpool.$$
export TESTPOOL1=testpool1.$$
export TESTPOOL2=testpool2.$$
export TESTPOOL3=testpool3.$$

# some test file system names
export TESTFS=testfs.$$
export TESTFS1=testfs1.$$
export TESTFS2=testfs2.$$
export TESTFS3=testfs3.$$

# some test directory names
export TESTDIR=${TEST_BASE_DIR%%/}/testdir$$
export TESTDIR0=${TEST_BASE_DIR%%/}/testdir0$$
export TESTDIR1=${TEST_BASE_DIR%%/}/testdir1$$
export TESTDIR2=${TEST_BASE_DIR%%/}/testdir2$$

export ZFSROOT=

export TESTSNAP=testsnap$$
export TESTSNAP1=testsnap1$$
export TESTSNAP2=testsnap2$$
export TESTCLONE=testclone$$
export TESTCLONE1=testclone1$$
export TESTCLONE2=testclone2$$
export TESTCLCT=testclct$$
export TESTCTR=testctr$$
export TESTCTR1=testctr1$$
export TESTCTR2=testctr2$$
export TESTVOL=testvol$$
export TESTVOL1=testvol1$$
export TESTVOL2=testvol2$$
export TESTFILE0=testfile0.$$
export TESTFILE1=testfile1.$$
export TESTFILE2=testfile2.$$

export LONGPNAME="poolname50charslong_012345678901234567890123456789"
export LONGFSNAME="fsysname50charslong_012345678901234567890123456789"
export SNAPFS="$TESTPOOL/$TESTFS@$TESTSNAP"
export SNAPFS1="$TESTPOOL/$TESTVOL@$TESTSNAP"

export VOLSIZE=150m
export BIGVOLSIZE=1eb

# Default to limit disks to be checked
export MAX_FINDDISKSNUM=6

# For iscsi target support
export ISCSITGTFILE=/tmp/iscsitgt_file
export ISCSITGT_FMRI=svc:/system/iscsitgt:default

#
# finally, if we're running in a local zone
# we take some additional actions
if ! is_global_zone; then
	reexport_pool
fi

export ZFS_VERSION=5
export ZFS_ALL_VERSIONS="1 2 3 4 5"

for i in $ZFS_ALL_VERSIONS; do
	eval 'export ZFS_VERSION_$i="v${i}-fs"'
done

if is_linux; then
	unpack_opts="--sparse -xf"
	pack_opts="--sparse -cf"
	verbose=" -v"
	unpack_preserve=" -xpf"
	pack_preserve=" -cpf"

	ZVOL_DEVDIR="/dev/zvol"
	ZVOL_RDEVDIR="/dev/zvol"
	DEV_DSKDIR="/dev"
	DEV_RDSKDIR="/dev"

	NEWFS_DEFAULT_FS="ext2"
else
	unpack_opts="xv"
	pack_opts="cf"
	verbose="v"
	unpack_preserve="xpf"
	pack_preserve="cpf"

	ZVOL_DEVDIR="/dev/zvol/dsk"
	ZVOL_RDEVDIR="/dev/zvol/rdsk"
	DEV_DSKDIR="/dev/dsk"
	DEV_RDSKDIR="/dev/rdsk"

	NEWFS_DEFAULT_FS="ufs"
fi
export unpack_opts pack_opts verbose unpack_preserve pack_preserve \
       ZVOL_DEVDIR ZVOL_RDEVDIR NEWFS_DEFAULT_FS DEV_DSKDIR DEV_RDSKDIR