/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2015 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2016 by Delphix. All rights reserved. * Copyright 2015 RackTop Systems. * Copyright (c) 2016, Intel Corporation. */ /* * Pool import support functions. * * To import a pool, we rely on reading the configuration information from the * ZFS label of each device. If we successfully read the label, then we * organize the configuration information in the following hierarchy: * * pool guid -> toplevel vdev guid -> label txg * * Duplicate entries matching this same tuple will be discarded. Once we have * examined every device, we pick the best label txg config for each toplevel * vdev. We then arrange these toplevel vdevs into a complete pool config, and * update any paths that have changed. Finally, we attempt to import the pool * using our derived config, and record the results. */ #include #include #include #include #include #ifdef HAVE_LIBUDEV #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include "libzfs.h" #include "libzfs_impl.h" #include /* * Intermediate structures used to gather configuration information. */ typedef struct config_entry { uint64_t ce_txg; nvlist_t *ce_config; struct config_entry *ce_next; } config_entry_t; typedef struct vdev_entry { uint64_t ve_guid; config_entry_t *ve_configs; struct vdev_entry *ve_next; } vdev_entry_t; typedef struct pool_entry { uint64_t pe_guid; vdev_entry_t *pe_vdevs; struct pool_entry *pe_next; } pool_entry_t; typedef struct name_entry { char *ne_name; uint64_t ne_guid; uint64_t ne_order; uint64_t ne_num_labels; struct name_entry *ne_next; } name_entry_t; typedef struct pool_list { pool_entry_t *pools; name_entry_t *names; } pool_list_t; #define DEV_BYID_PATH "/dev/disk/by-id/" /* * Linux persistent device strings for vdev labels * * based on libudev for consistency with libudev disk add/remove events */ #ifdef HAVE_LIBUDEV typedef struct vdev_dev_strs { char vds_devid[128]; char vds_devphys[128]; } vdev_dev_strs_t; /* * Obtain the persistent device id string (describes what) * * used by ZED vdev matching for auto-{online,expand,replace} */ int zfs_device_get_devid(struct udev_device *dev, char *bufptr, size_t buflen) { struct udev_list_entry *entry; const char *bus; char devbyid[MAXPATHLEN]; /* The bus based by-id path is preferred */ bus = udev_device_get_property_value(dev, "ID_BUS"); if (bus == NULL) { const char *dm_uuid; /* * For multipath nodes use the persistent uuid based identifier * * Example: /dev/disk/by-id/dm-uuid-mpath-35000c5006304de3f */ dm_uuid = udev_device_get_property_value(dev, "DM_UUID"); if (dm_uuid != NULL) { (void) snprintf(bufptr, buflen, "dm-uuid-%s", dm_uuid); return (0); } return (ENODATA); } /* * locate the bus specific by-id link */ (void) snprintf(devbyid, sizeof (devbyid), "%s%s-", DEV_BYID_PATH, bus); entry = udev_device_get_devlinks_list_entry(dev); while (entry != NULL) { const char *name; name = udev_list_entry_get_name(entry); if (strncmp(name, devbyid, strlen(devbyid)) == 0) { name += strlen(DEV_BYID_PATH); (void) strlcpy(bufptr, name, buflen); return (0); } entry = udev_list_entry_get_next(entry); } return (ENODATA); } /* * Obtain the persistent physical location string (describes where) * * used by ZED vdev matching for auto-{online,expand,replace} */ int zfs_device_get_physical(struct udev_device *dev, char *bufptr, size_t buflen) { const char *physpath = NULL; /* * Normal disks use ID_PATH for their physical path. Device mapper * devices are virtual and don't have a physical path. For them we * use ID_VDEV instead, which is setup via the /etc/vdev_id.conf file. * ID_VDEV provides a persistent path to a virtual device. If you * don't have vdev_id.conf setup, you cannot use multipath autoreplace. */ if (!((physpath = udev_device_get_property_value(dev, "ID_PATH")) && physpath[0])) { if (!((physpath = udev_device_get_property_value(dev, "ID_VDEV")) && physpath[0])) { return (ENODATA); } } (void) strlcpy(bufptr, physpath, buflen); return (0); } boolean_t udev_is_mpath(struct udev_device *dev) { return udev_device_get_property_value(dev, "DM_UUID") && udev_device_get_property_value(dev, "MPATH_SBIN_PATH"); } /* * A disk is considered a multipath whole disk when: * DEVNAME key value has "dm-" * DM_NAME key value has "mpath" prefix * DM_UUID key exists * ID_PART_TABLE_TYPE key does not exist or is not gpt */ static boolean_t udev_mpath_whole_disk(struct udev_device *dev) { const char *devname, *type, *uuid; devname = udev_device_get_property_value(dev, "DEVNAME"); type = udev_device_get_property_value(dev, "ID_PART_TABLE_TYPE"); uuid = udev_device_get_property_value(dev, "DM_UUID"); if ((devname != NULL && strncmp(devname, "/dev/dm-", 8) == 0) && ((type == NULL) || (strcmp(type, "gpt") != 0)) && (uuid != NULL)) { return (B_TRUE); } return (B_FALSE); } /* * Check if a disk is effectively a multipath whole disk */ boolean_t is_mpath_whole_disk(const char *path) { struct udev *udev; struct udev_device *dev = NULL; char nodepath[MAXPATHLEN]; char *sysname; boolean_t wholedisk = B_FALSE; if (realpath(path, nodepath) == NULL) return (B_FALSE); sysname = strrchr(nodepath, '/') + 1; if (strncmp(sysname, "dm-", 3) != 0) return (B_FALSE); if ((udev = udev_new()) == NULL) return (B_FALSE); if ((dev = udev_device_new_from_subsystem_sysname(udev, "block", sysname)) == NULL) { udev_device_unref(dev); return (B_FALSE); } wholedisk = udev_mpath_whole_disk(dev); udev_device_unref(dev); return (wholedisk); } static int udev_device_is_ready(struct udev_device *dev) { #ifdef HAVE_LIBUDEV_UDEV_DEVICE_GET_IS_INITIALIZED return (udev_device_get_is_initialized(dev)); #else /* wait for DEVLINKS property to be initialized */ return (udev_device_get_property_value(dev, "DEVLINKS") != NULL); #endif } /* * Wait up to timeout_ms for udev to set up the device node. The device is * considered ready when libudev determines it has been initialized, all of * the device links have been verified to exist, and it has been allowed to * settle. At this point the device the device can be accessed reliably. * Depending on the complexity of the udev rules this process could take * several seconds. */ int zpool_label_disk_wait(char *path, int timeout_ms) { struct udev *udev; struct udev_device *dev = NULL; char nodepath[MAXPATHLEN]; char *sysname = NULL; int ret = ENODEV; int settle_ms = 50; long sleep_ms = 10; hrtime_t start, settle; if ((udev = udev_new()) == NULL) return (ENXIO); start = gethrtime(); settle = 0; do { if (sysname == NULL) { if (realpath(path, nodepath) != NULL) { sysname = strrchr(nodepath, '/') + 1; } else { (void) usleep(sleep_ms * MILLISEC); continue; } } dev = udev_device_new_from_subsystem_sysname(udev, "block", sysname); if ((dev != NULL) && udev_device_is_ready(dev)) { struct udev_list_entry *links, *link = NULL; ret = 0; links = udev_device_get_devlinks_list_entry(dev); udev_list_entry_foreach(link, links) { struct stat64 statbuf; const char *name; name = udev_list_entry_get_name(link); errno = 0; if (stat64(name, &statbuf) == 0 && errno == 0) continue; settle = 0; ret = ENODEV; break; } if (ret == 0) { if (settle == 0) { settle = gethrtime(); } else if (NSEC2MSEC(gethrtime() - settle) >= settle_ms) { udev_device_unref(dev); break; } } } udev_device_unref(dev); (void) usleep(sleep_ms * MILLISEC); } while (NSEC2MSEC(gethrtime() - start) < timeout_ms); udev_unref(udev); return (ret); } /* * Encode the persistent devices strings * used for the vdev disk label */ static int encode_device_strings(const char *path, vdev_dev_strs_t *ds, boolean_t wholedisk) { struct udev *udev; struct udev_device *dev = NULL; char nodepath[MAXPATHLEN]; char *sysname; int ret = ENODEV; hrtime_t start; if ((udev = udev_new()) == NULL) return (ENXIO); /* resolve path to a runtime device node instance */ if (realpath(path, nodepath) == NULL) goto no_dev; sysname = strrchr(nodepath, '/') + 1; /* * Wait up to 3 seconds for udev to set up the device node context */ start = gethrtime(); do { dev = udev_device_new_from_subsystem_sysname(udev, "block", sysname); if (dev == NULL) goto no_dev; if (udev_device_is_ready(dev)) break; /* udev ready */ udev_device_unref(dev); dev = NULL; if (NSEC2MSEC(gethrtime() - start) < 10) (void) sched_yield(); /* yield/busy wait up to 10ms */ else (void) usleep(10 * MILLISEC); } while (NSEC2MSEC(gethrtime() - start) < (3 * MILLISEC)); if (dev == NULL) goto no_dev; /* * Only whole disks require extra device strings */ if (!wholedisk && !udev_mpath_whole_disk(dev)) goto no_dev; ret = zfs_device_get_devid(dev, ds->vds_devid, sizeof (ds->vds_devid)); if (ret != 0) goto no_dev_ref; /* physical location string (optional) */ if (zfs_device_get_physical(dev, ds->vds_devphys, sizeof (ds->vds_devphys)) != 0) { ds->vds_devphys[0] = '\0'; /* empty string --> not available */ } no_dev_ref: udev_device_unref(dev); no_dev: udev_unref(udev); return (ret); } /* * Update a leaf vdev's persistent device strings (Linux only) * * - only applies for a dedicated leaf vdev (aka whole disk) * - updated during pool create|add|attach|import * - used for matching device matching during auto-{online,expand,replace} * - stored in a leaf disk config label (i.e. alongside 'path' NVP) * - these strings are currently not used in kernel (i.e. for vdev_disk_open) * * single device node example: * devid: 'scsi-MG03SCA300_350000494a8cb3d67-part1' * phys_path: 'pci-0000:04:00.0-sas-0x50000394a8cb3d67-lun-0' * * multipath device node example: * devid: 'dm-uuid-mpath-35000c5006304de3f' * * We also store the enclosure sysfs path for turning on enclosure LEDs * (if applicable): * vdev_enc_sysfs_path: '/sys/class/enclosure/11:0:1:0/SLOT 4' */ void update_vdev_config_dev_strs(nvlist_t *nv) { vdev_dev_strs_t vds; char *env, *type, *path; uint64_t wholedisk = 0; char *upath, *spath; /* * For the benefit of legacy ZFS implementations, allow * for opting out of devid strings in the vdev label. * * example use: * env ZFS_VDEV_DEVID_OPT_OUT=YES zpool import dozer * * explanation: * Older ZFS on Linux implementations had issues when attempting to * display pool config VDEV names if a "devid" NVP value is present * in the pool's config. * * For example, a pool that originated on illumos platform would * have a devid value in the config and "zpool status" would fail * when listing the config. * * A pool can be stripped of any "devid" values on import or * prevented from adding them on zpool create|add by setting * ZFS_VDEV_DEVID_OPT_OUT. */ env = getenv("ZFS_VDEV_DEVID_OPT_OUT"); if (env && (strtoul(env, NULL, 0) > 0 || !strncasecmp(env, "YES", 3) || !strncasecmp(env, "ON", 2))) { (void) nvlist_remove_all(nv, ZPOOL_CONFIG_DEVID); (void) nvlist_remove_all(nv, ZPOOL_CONFIG_PHYS_PATH); return; } if (nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) != 0 || strcmp(type, VDEV_TYPE_DISK) != 0) { return; } if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) != 0) return; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); /* * Update device string values in config nvlist */ if (encode_device_strings(path, &vds, (boolean_t)wholedisk) == 0) { (void) nvlist_add_string(nv, ZPOOL_CONFIG_DEVID, vds.vds_devid); if (vds.vds_devphys[0] != '\0') { (void) nvlist_add_string(nv, ZPOOL_CONFIG_PHYS_PATH, vds.vds_devphys); } /* Add enclosure sysfs path (if disk is in an enclosure) */ upath = zfs_get_underlying_path(path); spath = zfs_get_enclosure_sysfs_path(upath); if (spath) nvlist_add_string(nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH, spath); else nvlist_remove_all(nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH); free(upath); free(spath); } else { /* clear out any stale entries */ (void) nvlist_remove_all(nv, ZPOOL_CONFIG_DEVID); (void) nvlist_remove_all(nv, ZPOOL_CONFIG_PHYS_PATH); (void) nvlist_remove_all(nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH); } } #else boolean_t is_mpath_whole_disk(const char *path) { return (B_FALSE); } /* * Wait up to timeout_ms for udev to set up the device node. The device is * considered ready when the provided path have been verified to exist and * it has been allowed to settle. At this point the device the device can * be accessed reliably. Depending on the complexity of the udev rules thisi * process could take several seconds. */ int zpool_label_disk_wait(char *path, int timeout_ms) { int settle_ms = 50; long sleep_ms = 10; hrtime_t start, settle; struct stat64 statbuf; start = gethrtime(); settle = 0; do { errno = 0; if ((stat64(path, &statbuf) == 0) && (errno == 0)) { if (settle == 0) settle = gethrtime(); else if (NSEC2MSEC(gethrtime() - settle) >= settle_ms) return (0); } else if (errno != ENOENT) { return (errno); } usleep(sleep_ms * MILLISEC); } while (NSEC2MSEC(gethrtime() - start) < timeout_ms); return (ENODEV); } void update_vdev_config_dev_strs(nvlist_t *nv) { } #endif /* HAVE_LIBUDEV */ /* * Go through and fix up any path and/or devid information for the given vdev * configuration. */ static int fix_paths(nvlist_t *nv, name_entry_t *names) { nvlist_t **child; uint_t c, children; uint64_t guid; name_entry_t *ne, *best; char *path; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) if (fix_paths(child[c], names) != 0) return (-1); return (0); } /* * This is a leaf (file or disk) vdev. In either case, go through * the name list and see if we find a matching guid. If so, replace * the path and see if we can calculate a new devid. * * There may be multiple names associated with a particular guid, in * which case we have overlapping partitions or multiple paths to the * same disk. In this case we prefer to use the path name which * matches the ZPOOL_CONFIG_PATH. If no matching entry is found we * use the lowest order device which corresponds to the first match * while traversing the ZPOOL_IMPORT_PATH search path. */ verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) == 0); if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) != 0) path = NULL; best = NULL; for (ne = names; ne != NULL; ne = ne->ne_next) { if (ne->ne_guid == guid) { if (path == NULL) { best = ne; break; } if ((strlen(path) == strlen(ne->ne_name)) && strncmp(path, ne->ne_name, strlen(path)) == 0) { best = ne; break; } if (best == NULL) { best = ne; continue; } /* Prefer paths with move vdev labels. */ if (ne->ne_num_labels > best->ne_num_labels) { best = ne; continue; } /* Prefer paths earlier in the search order. */ if (ne->ne_num_labels == best->ne_num_labels && ne->ne_order < best->ne_order) { best = ne; continue; } } } if (best == NULL) return (0); if (nvlist_add_string(nv, ZPOOL_CONFIG_PATH, best->ne_name) != 0) return (-1); /* Linux only - update ZPOOL_CONFIG_DEVID and ZPOOL_CONFIG_PHYS_PATH */ update_vdev_config_dev_strs(nv); return (0); } /* * Add the given configuration to the list of known devices. */ static int add_config(libzfs_handle_t *hdl, pool_list_t *pl, const char *path, int order, int num_labels, nvlist_t *config) { uint64_t pool_guid, vdev_guid, top_guid, txg, state; pool_entry_t *pe; vdev_entry_t *ve; config_entry_t *ce; name_entry_t *ne; /* * If this is a hot spare not currently in use or level 2 cache * device, add it to the list of names to translate, but don't do * anything else. */ if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &state) == 0 && (state == POOL_STATE_SPARE || state == POOL_STATE_L2CACHE) && nvlist_lookup_uint64(config, ZPOOL_CONFIG_GUID, &vdev_guid) == 0) { if ((ne = zfs_alloc(hdl, sizeof (name_entry_t))) == NULL) { nvlist_free(config); return (-1); } if ((ne->ne_name = zfs_strdup(hdl, path)) == NULL) { free(ne); nvlist_free(config); return (-1); } ne->ne_guid = vdev_guid; ne->ne_order = order; ne->ne_num_labels = num_labels; ne->ne_next = pl->names; pl->names = ne; nvlist_free(config); return (0); } /* * If we have a valid config but cannot read any of these fields, then * it means we have a half-initialized label. In vdev_label_init() * we write a label with txg == 0 so that we can identify the device * in case the user refers to the same disk later on. If we fail to * create the pool, we'll be left with a label in this state * which should not be considered part of a valid pool. */ if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &pool_guid) != 0 || nvlist_lookup_uint64(config, ZPOOL_CONFIG_GUID, &vdev_guid) != 0 || nvlist_lookup_uint64(config, ZPOOL_CONFIG_TOP_GUID, &top_guid) != 0 || nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_TXG, &txg) != 0 || txg == 0) { nvlist_free(config); return (0); } /* * First, see if we know about this pool. If not, then add it to the * list of known pools. */ for (pe = pl->pools; pe != NULL; pe = pe->pe_next) { if (pe->pe_guid == pool_guid) break; } if (pe == NULL) { if ((pe = zfs_alloc(hdl, sizeof (pool_entry_t))) == NULL) { nvlist_free(config); return (-1); } pe->pe_guid = pool_guid; pe->pe_next = pl->pools; pl->pools = pe; } /* * Second, see if we know about this toplevel vdev. Add it if its * missing. */ for (ve = pe->pe_vdevs; ve != NULL; ve = ve->ve_next) { if (ve->ve_guid == top_guid) break; } if (ve == NULL) { if ((ve = zfs_alloc(hdl, sizeof (vdev_entry_t))) == NULL) { nvlist_free(config); return (-1); } ve->ve_guid = top_guid; ve->ve_next = pe->pe_vdevs; pe->pe_vdevs = ve; } /* * Third, see if we have a config with a matching transaction group. If * so, then we do nothing. Otherwise, add it to the list of known * configs. */ for (ce = ve->ve_configs; ce != NULL; ce = ce->ce_next) { if (ce->ce_txg == txg) break; } if (ce == NULL) { if ((ce = zfs_alloc(hdl, sizeof (config_entry_t))) == NULL) { nvlist_free(config); return (-1); } ce->ce_txg = txg; ce->ce_config = config; ce->ce_next = ve->ve_configs; ve->ve_configs = ce; } else { nvlist_free(config); } /* * At this point we've successfully added our config to the list of * known configs. The last thing to do is add the vdev guid -> path * mappings so that we can fix up the configuration as necessary before * doing the import. */ if ((ne = zfs_alloc(hdl, sizeof (name_entry_t))) == NULL) return (-1); if ((ne->ne_name = zfs_strdup(hdl, path)) == NULL) { free(ne); return (-1); } ne->ne_guid = vdev_guid; ne->ne_order = order; ne->ne_num_labels = num_labels; ne->ne_next = pl->names; pl->names = ne; return (0); } /* * Returns true if the named pool matches the given GUID. */ static int pool_active(libzfs_handle_t *hdl, const char *name, uint64_t guid, boolean_t *isactive) { zpool_handle_t *zhp; uint64_t theguid; if (zpool_open_silent(hdl, name, &zhp) != 0) return (-1); if (zhp == NULL) { *isactive = B_FALSE; return (0); } verify(nvlist_lookup_uint64(zhp->zpool_config, ZPOOL_CONFIG_POOL_GUID, &theguid) == 0); zpool_close(zhp); *isactive = (theguid == guid); return (0); } static nvlist_t * refresh_config(libzfs_handle_t *hdl, nvlist_t *config) { nvlist_t *nvl; zfs_cmd_t zc = {"\0"}; int err, dstbuf_size; if (zcmd_write_conf_nvlist(hdl, &zc, config) != 0) return (NULL); dstbuf_size = MAX(CONFIG_BUF_MINSIZE, zc.zc_nvlist_conf_size * 4); if (zcmd_alloc_dst_nvlist(hdl, &zc, dstbuf_size) != 0) { zcmd_free_nvlists(&zc); return (NULL); } while ((err = ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_TRYIMPORT, &zc)) != 0 && errno == ENOMEM) { if (zcmd_expand_dst_nvlist(hdl, &zc) != 0) { zcmd_free_nvlists(&zc); return (NULL); } } if (err) { zcmd_free_nvlists(&zc); return (NULL); } if (zcmd_read_dst_nvlist(hdl, &zc, &nvl) != 0) { zcmd_free_nvlists(&zc); return (NULL); } zcmd_free_nvlists(&zc); return (nvl); } /* * Determine if the vdev id is a hole in the namespace. */ boolean_t vdev_is_hole(uint64_t *hole_array, uint_t holes, uint_t id) { int c; for (c = 0; c < holes; c++) { /* Top-level is a hole */ if (hole_array[c] == id) return (B_TRUE); } return (B_FALSE); } /* * Convert our list of pools into the definitive set of configurations. We * start by picking the best config for each toplevel vdev. Once that's done, * we assemble the toplevel vdevs into a full config for the pool. We make a * pass to fix up any incorrect paths, and then add it to the main list to * return to the user. */ static nvlist_t * get_configs(libzfs_handle_t *hdl, pool_list_t *pl, boolean_t active_ok) { pool_entry_t *pe; vdev_entry_t *ve; config_entry_t *ce; nvlist_t *ret = NULL, *config = NULL, *tmp = NULL, *nvtop, *nvroot; nvlist_t **spares, **l2cache; uint_t i, nspares, nl2cache; boolean_t config_seen; uint64_t best_txg; char *name, *hostname = NULL; uint64_t guid; uint_t children = 0; nvlist_t **child = NULL; uint_t holes; uint64_t *hole_array, max_id; uint_t c; boolean_t isactive; uint64_t hostid; nvlist_t *nvl; boolean_t valid_top_config = B_FALSE; if (nvlist_alloc(&ret, 0, 0) != 0) goto nomem; for (pe = pl->pools; pe != NULL; pe = pe->pe_next) { uint64_t id, max_txg = 0; if (nvlist_alloc(&config, NV_UNIQUE_NAME, 0) != 0) goto nomem; config_seen = B_FALSE; /* * Iterate over all toplevel vdevs. Grab the pool configuration * from the first one we find, and then go through the rest and * add them as necessary to the 'vdevs' member of the config. */ for (ve = pe->pe_vdevs; ve != NULL; ve = ve->ve_next) { /* * Determine the best configuration for this vdev by * selecting the config with the latest transaction * group. */ best_txg = 0; for (ce = ve->ve_configs; ce != NULL; ce = ce->ce_next) { if (ce->ce_txg > best_txg) { tmp = ce->ce_config; best_txg = ce->ce_txg; } } /* * We rely on the fact that the max txg for the * pool will contain the most up-to-date information * about the valid top-levels in the vdev namespace. */ if (best_txg > max_txg) { (void) nvlist_remove(config, ZPOOL_CONFIG_VDEV_CHILDREN, DATA_TYPE_UINT64); (void) nvlist_remove(config, ZPOOL_CONFIG_HOLE_ARRAY, DATA_TYPE_UINT64_ARRAY); max_txg = best_txg; hole_array = NULL; holes = 0; max_id = 0; valid_top_config = B_FALSE; if (nvlist_lookup_uint64(tmp, ZPOOL_CONFIG_VDEV_CHILDREN, &max_id) == 0) { verify(nvlist_add_uint64(config, ZPOOL_CONFIG_VDEV_CHILDREN, max_id) == 0); valid_top_config = B_TRUE; } if (nvlist_lookup_uint64_array(tmp, ZPOOL_CONFIG_HOLE_ARRAY, &hole_array, &holes) == 0) { verify(nvlist_add_uint64_array(config, ZPOOL_CONFIG_HOLE_ARRAY, hole_array, holes) == 0); } } if (!config_seen) { /* * Copy the relevant pieces of data to the pool * configuration: * * version * pool guid * name * comment (if available) * pool state * hostid (if available) * hostname (if available) */ uint64_t state, version; char *comment = NULL; version = fnvlist_lookup_uint64(tmp, ZPOOL_CONFIG_VERSION); fnvlist_add_uint64(config, ZPOOL_CONFIG_VERSION, version); guid = fnvlist_lookup_uint64(tmp, ZPOOL_CONFIG_POOL_GUID); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_GUID, guid); name = fnvlist_lookup_string(tmp, ZPOOL_CONFIG_POOL_NAME); fnvlist_add_string(config, ZPOOL_CONFIG_POOL_NAME, name); if (nvlist_lookup_string(tmp, ZPOOL_CONFIG_COMMENT, &comment) == 0) fnvlist_add_string(config, ZPOOL_CONFIG_COMMENT, comment); state = fnvlist_lookup_uint64(tmp, ZPOOL_CONFIG_POOL_STATE); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_STATE, state); hostid = 0; if (nvlist_lookup_uint64(tmp, ZPOOL_CONFIG_HOSTID, &hostid) == 0) { fnvlist_add_uint64(config, ZPOOL_CONFIG_HOSTID, hostid); hostname = fnvlist_lookup_string(tmp, ZPOOL_CONFIG_HOSTNAME); fnvlist_add_string(config, ZPOOL_CONFIG_HOSTNAME, hostname); } config_seen = B_TRUE; } /* * Add this top-level vdev to the child array. */ verify(nvlist_lookup_nvlist(tmp, ZPOOL_CONFIG_VDEV_TREE, &nvtop) == 0); verify(nvlist_lookup_uint64(nvtop, ZPOOL_CONFIG_ID, &id) == 0); if (id >= children) { nvlist_t **newchild; newchild = zfs_alloc(hdl, (id + 1) * sizeof (nvlist_t *)); if (newchild == NULL) goto nomem; for (c = 0; c < children; c++) newchild[c] = child[c]; free(child); child = newchild; children = id + 1; } if (nvlist_dup(nvtop, &child[id], 0) != 0) goto nomem; } /* * If we have information about all the top-levels then * clean up the nvlist which we've constructed. This * means removing any extraneous devices that are * beyond the valid range or adding devices to the end * of our array which appear to be missing. */ if (valid_top_config) { if (max_id < children) { for (c = max_id; c < children; c++) nvlist_free(child[c]); children = max_id; } else if (max_id > children) { nvlist_t **newchild; newchild = zfs_alloc(hdl, (max_id) * sizeof (nvlist_t *)); if (newchild == NULL) goto nomem; for (c = 0; c < children; c++) newchild[c] = child[c]; free(child); child = newchild; children = max_id; } } verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); /* * The vdev namespace may contain holes as a result of * device removal. We must add them back into the vdev * tree before we process any missing devices. */ if (holes > 0) { ASSERT(valid_top_config); for (c = 0; c < children; c++) { nvlist_t *holey; if (child[c] != NULL || !vdev_is_hole(hole_array, holes, c)) continue; if (nvlist_alloc(&holey, NV_UNIQUE_NAME, 0) != 0) goto nomem; /* * Holes in the namespace are treated as * "hole" top-level vdevs and have a * special flag set on them. */ if (nvlist_add_string(holey, ZPOOL_CONFIG_TYPE, VDEV_TYPE_HOLE) != 0 || nvlist_add_uint64(holey, ZPOOL_CONFIG_ID, c) != 0 || nvlist_add_uint64(holey, ZPOOL_CONFIG_GUID, 0ULL) != 0) { nvlist_free(holey); goto nomem; } child[c] = holey; } } /* * Look for any missing top-level vdevs. If this is the case, * create a faked up 'missing' vdev as a placeholder. We cannot * simply compress the child array, because the kernel performs * certain checks to make sure the vdev IDs match their location * in the configuration. */ for (c = 0; c < children; c++) { if (child[c] == NULL) { nvlist_t *missing; if (nvlist_alloc(&missing, NV_UNIQUE_NAME, 0) != 0) goto nomem; if (nvlist_add_string(missing, ZPOOL_CONFIG_TYPE, VDEV_TYPE_MISSING) != 0 || nvlist_add_uint64(missing, ZPOOL_CONFIG_ID, c) != 0 || nvlist_add_uint64(missing, ZPOOL_CONFIG_GUID, 0ULL) != 0) { nvlist_free(missing); goto nomem; } child[c] = missing; } } /* * Put all of this pool's top-level vdevs into a root vdev. */ if (nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) != 0) goto nomem; if (nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) != 0 || nvlist_add_uint64(nvroot, ZPOOL_CONFIG_ID, 0ULL) != 0 || nvlist_add_uint64(nvroot, ZPOOL_CONFIG_GUID, guid) != 0 || nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, child, children) != 0) { nvlist_free(nvroot); goto nomem; } for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); children = 0; child = NULL; /* * Go through and fix up any paths and/or devids based on our * known list of vdev GUID -> path mappings. */ if (fix_paths(nvroot, pl->names) != 0) { nvlist_free(nvroot); goto nomem; } /* * Add the root vdev to this pool's configuration. */ if (nvlist_add_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, nvroot) != 0) { nvlist_free(nvroot); goto nomem; } nvlist_free(nvroot); /* * zdb uses this path to report on active pools that were * imported or created using -R. */ if (active_ok) goto add_pool; /* * Determine if this pool is currently active, in which case we * can't actually import it. */ verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); if (pool_active(hdl, name, guid, &isactive) != 0) goto error; if (isactive) { nvlist_free(config); config = NULL; continue; } if ((nvl = refresh_config(hdl, config)) == NULL) { nvlist_free(config); config = NULL; continue; } nvlist_free(config); config = nvl; /* * Go through and update the paths for spares, now that we have * them. */ verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { for (i = 0; i < nspares; i++) { if (fix_paths(spares[i], pl->names) != 0) goto nomem; } } /* * Update the paths for l2cache devices. */ if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0) { for (i = 0; i < nl2cache; i++) { if (fix_paths(l2cache[i], pl->names) != 0) goto nomem; } } /* * Restore the original information read from the actual label. */ (void) nvlist_remove(config, ZPOOL_CONFIG_HOSTID, DATA_TYPE_UINT64); (void) nvlist_remove(config, ZPOOL_CONFIG_HOSTNAME, DATA_TYPE_STRING); if (hostid != 0) { verify(nvlist_add_uint64(config, ZPOOL_CONFIG_HOSTID, hostid) == 0); verify(nvlist_add_string(config, ZPOOL_CONFIG_HOSTNAME, hostname) == 0); } add_pool: /* * Add this pool to the list of configs. */ verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); if (nvlist_add_nvlist(ret, name, config) != 0) goto nomem; nvlist_free(config); config = NULL; } return (ret); nomem: (void) no_memory(hdl); error: nvlist_free(config); nvlist_free(ret); for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); return (NULL); } /* * Return the offset of the given label. */ static uint64_t label_offset(uint64_t size, int l) { ASSERT(P2PHASE_TYPED(size, sizeof (vdev_label_t), uint64_t) == 0); return (l * sizeof (vdev_label_t) + (l < VDEV_LABELS / 2 ? 0 : size - VDEV_LABELS * sizeof (vdev_label_t))); } /* * Given a file descriptor, read the label information and return an nvlist * describing the configuration, if there is one. The number of valid * labels found will be returned in num_labels when non-NULL. */ int zpool_read_label(int fd, nvlist_t **config, int *num_labels) { struct stat64 statbuf; int l, count = 0; vdev_label_t *label; nvlist_t *expected_config = NULL; uint64_t expected_guid = 0, size; int error; *config = NULL; if (fstat64_blk(fd, &statbuf) == -1) return (0); size = P2ALIGN_TYPED(statbuf.st_size, sizeof (vdev_label_t), uint64_t); error = posix_memalign((void **)&label, PAGESIZE, sizeof (*label)); if (error) return (-1); for (l = 0; l < VDEV_LABELS; l++) { uint64_t state, guid, txg; if (pread64(fd, label, sizeof (vdev_label_t), label_offset(size, l)) != sizeof (vdev_label_t)) continue; if (nvlist_unpack(label->vl_vdev_phys.vp_nvlist, sizeof (label->vl_vdev_phys.vp_nvlist), config, 0) != 0) continue; if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_GUID, &guid) != 0 || guid == 0) { nvlist_free(*config); continue; } if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_STATE, &state) != 0 || state > POOL_STATE_L2CACHE) { nvlist_free(*config); continue; } if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE && (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_TXG, &txg) != 0 || txg == 0)) { nvlist_free(*config); continue; } if (expected_guid) { if (expected_guid == guid) count++; nvlist_free(*config); } else { expected_config = *config; expected_guid = guid; count++; } } if (num_labels != NULL) *num_labels = count; free(label); *config = expected_config; return (0); } typedef struct rdsk_node { char *rn_name; /* Full path to device */ int rn_order; /* Preferred order (low to high) */ int rn_num_labels; /* Number of valid labels */ uint64_t rn_vdev_guid; /* Expected vdev guid when set */ libzfs_handle_t *rn_hdl; nvlist_t *rn_config; /* Label config */ avl_tree_t *rn_avl; avl_node_t rn_node; kmutex_t *rn_lock; boolean_t rn_labelpaths; } rdsk_node_t; /* * Sorted by vdev guid and full path to allow for multiple entries with * the same full path name. This is required because it's possible to * have multiple block devices with labels that refer to the same * ZPOOL_CONFIG_PATH yet have different vdev guids. In this case both * entries need to be added to the cache. Scenarios where this can occur * include overwritten pool labels, devices which are visible from multiple * hosts and multipath devices. */ static int slice_cache_compare(const void *arg1, const void *arg2) { const char *nm1 = ((rdsk_node_t *)arg1)->rn_name; const char *nm2 = ((rdsk_node_t *)arg2)->rn_name; uint64_t guid1 = ((rdsk_node_t *)arg1)->rn_vdev_guid; uint64_t guid2 = ((rdsk_node_t *)arg2)->rn_vdev_guid; int rv; rv = AVL_CMP(guid1, guid2); if (rv) return (rv); return (AVL_ISIGN(strcmp(nm1, nm2))); } static boolean_t is_watchdog_dev(char *dev) { /* For 'watchdog' dev */ if (strcmp(dev, "watchdog") == 0) return (B_TRUE); /* For 'watchdog */ if (strstr(dev, "watchdog") == dev && isdigit(dev[8])) return (B_TRUE); return (B_FALSE); } static int label_paths_impl(libzfs_handle_t *hdl, nvlist_t *nvroot, uint64_t pool_guid, uint64_t vdev_guid, char **path, char **devid) { nvlist_t **child; uint_t c, children; uint64_t guid; char *val; int error; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) { error = label_paths_impl(hdl, child[c], pool_guid, vdev_guid, path, devid); if (error) return (error); } return (0); } if (nvroot == NULL) return (0); error = nvlist_lookup_uint64(nvroot, ZPOOL_CONFIG_GUID, &guid); if ((error != 0) || (guid != vdev_guid)) return (0); error = nvlist_lookup_string(nvroot, ZPOOL_CONFIG_PATH, &val); if (error == 0) *path = val; error = nvlist_lookup_string(nvroot, ZPOOL_CONFIG_DEVID, &val); if (error == 0) *devid = val; return (0); } /* * Given a disk label fetch the ZPOOL_CONFIG_PATH and ZPOOL_CONFIG_DEVID * and store these strings as config_path and devid_path respectively. * The returned pointers are only valid as long as label remains valid. */ static int label_paths(libzfs_handle_t *hdl, nvlist_t *label, char **path, char **devid) { nvlist_t *nvroot; uint64_t pool_guid; uint64_t vdev_guid; *path = NULL; *devid = NULL; if (nvlist_lookup_nvlist(label, ZPOOL_CONFIG_VDEV_TREE, &nvroot) || nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_GUID, &pool_guid) || nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &vdev_guid)) return (ENOENT); return (label_paths_impl(hdl, nvroot, pool_guid, vdev_guid, path, devid)); } static void zpool_open_func(void *arg) { rdsk_node_t *rn = arg; libzfs_handle_t *hdl = rn->rn_hdl; struct stat64 statbuf; nvlist_t *config; char *bname, *dupname; uint64_t vdev_guid = 0; int error; int num_labels; int fd; /* * Skip devices with well known prefixes there can be side effects * when opening devices which need to be avoided. * * hpet - High Precision Event Timer * watchdog - Watchdog must be closed in a special way. */ dupname = zfs_strdup(hdl, rn->rn_name); bname = basename(dupname); error = ((strcmp(bname, "hpet") == 0) || is_watchdog_dev(bname)); free(dupname); if (error) return; /* * Ignore failed stats. We only want regular files and block devices. */ if (stat64(rn->rn_name, &statbuf) != 0 || (!S_ISREG(statbuf.st_mode) && !S_ISBLK(statbuf.st_mode))) return; /* * Preferentially open using O_DIRECT to bypass the block device * cache which may be stale for multipath devices. An EINVAL errno * indicates O_DIRECT is unsupported so fallback to just O_RDONLY. */ fd = open(rn->rn_name, O_RDONLY | O_DIRECT); if ((fd < 0) && (errno == EINVAL)) fd = open(rn->rn_name, O_RDONLY); if (fd < 0) return; /* * This file is too small to hold a zpool */ if (S_ISREG(statbuf.st_mode) && statbuf.st_size < SPA_MINDEVSIZE) { (void) close(fd); return; } error = zpool_read_label(fd, &config, &num_labels); if (error != 0) { (void) close(fd); return; } if (num_labels == 0) { (void) close(fd); nvlist_free(config); return; } /* * Check that the vdev is for the expected guid. Additional entries * are speculatively added based on the paths stored in the labels. * Entries with valid paths but incorrect guids must be removed. */ error = nvlist_lookup_uint64(config, ZPOOL_CONFIG_GUID, &vdev_guid); if (error || (rn->rn_vdev_guid && rn->rn_vdev_guid != vdev_guid)) { (void) close(fd); nvlist_free(config); return; } (void) close(fd); rn->rn_config = config; rn->rn_num_labels = num_labels; /* * Add additional entries for paths described by this label. */ if (rn->rn_labelpaths) { char *path = NULL; char *devid = NULL; rdsk_node_t *slice; avl_index_t where; int error; if (label_paths(rn->rn_hdl, rn->rn_config, &path, &devid)) return; /* * Allow devlinks to stabilize so all paths are available. */ zpool_label_disk_wait(rn->rn_name, DISK_LABEL_WAIT); if (path != NULL) { slice = zfs_alloc(hdl, sizeof (rdsk_node_t)); slice->rn_name = zfs_strdup(hdl, path); slice->rn_vdev_guid = vdev_guid; slice->rn_avl = rn->rn_avl; slice->rn_hdl = hdl; slice->rn_order = IMPORT_ORDER_PREFERRED_1; slice->rn_labelpaths = B_FALSE; mutex_enter(rn->rn_lock); if (avl_find(rn->rn_avl, slice, &where)) { mutex_exit(rn->rn_lock); free(slice->rn_name); free(slice); } else { avl_insert(rn->rn_avl, slice, where); mutex_exit(rn->rn_lock); zpool_open_func(slice); } } if (devid != NULL) { slice = zfs_alloc(hdl, sizeof (rdsk_node_t)); error = asprintf(&slice->rn_name, "%s%s", DEV_BYID_PATH, devid); if (error == -1) { free(slice); return; } slice->rn_vdev_guid = vdev_guid; slice->rn_avl = rn->rn_avl; slice->rn_hdl = hdl; slice->rn_order = IMPORT_ORDER_PREFERRED_2; slice->rn_labelpaths = B_FALSE; mutex_enter(rn->rn_lock); if (avl_find(rn->rn_avl, slice, &where)) { mutex_exit(rn->rn_lock); free(slice->rn_name); free(slice); } else { avl_insert(rn->rn_avl, slice, where); mutex_exit(rn->rn_lock); zpool_open_func(slice); } } } } /* * Given a file descriptor, clear (zero) the label information. This function * is used in the appliance stack as part of the ZFS sysevent module and * to implement the "zpool labelclear" command. */ int zpool_clear_label(int fd) { struct stat64 statbuf; int l; vdev_label_t *label; uint64_t size; if (fstat64_blk(fd, &statbuf) == -1) return (0); size = P2ALIGN_TYPED(statbuf.st_size, sizeof (vdev_label_t), uint64_t); if ((label = calloc(sizeof (vdev_label_t), 1)) == NULL) return (-1); for (l = 0; l < VDEV_LABELS; l++) { if (pwrite64(fd, label, sizeof (vdev_label_t), label_offset(size, l)) != sizeof (vdev_label_t)) { free(label); return (-1); } } free(label); return (0); } /* * Scan a list of directories for zfs devices. */ static int zpool_find_import_scan(libzfs_handle_t *hdl, kmutex_t *lock, avl_tree_t **slice_cache, char **dir, int dirs) { avl_tree_t *cache; rdsk_node_t *slice; void *cookie; int i, error; *slice_cache = NULL; cache = zfs_alloc(hdl, sizeof (avl_tree_t)); avl_create(cache, slice_cache_compare, sizeof (rdsk_node_t), offsetof(rdsk_node_t, rn_node)); for (i = 0; i < dirs; i++) { char path[MAXPATHLEN]; struct dirent64 *dp; DIR *dirp; if (realpath(dir[i], path) == NULL) { error = errno; if (error == ENOENT) continue; zfs_error_aux(hdl, strerror(error)); (void) zfs_error_fmt(hdl, EZFS_BADPATH, dgettext( TEXT_DOMAIN, "cannot resolve path '%s'"), dir[i]); goto error; } dirp = opendir(path); if (dirp == NULL) { error = errno; zfs_error_aux(hdl, strerror(error)); (void) zfs_error_fmt(hdl, EZFS_BADPATH, dgettext(TEXT_DOMAIN, "cannot open '%s'"), path); goto error; } while ((dp = readdir64(dirp)) != NULL) { const char *name = dp->d_name; if (name[0] == '.' && (name[1] == 0 || (name[1] == '.' && name[2] == 0))) continue; slice = zfs_alloc(hdl, sizeof (rdsk_node_t)); error = asprintf(&slice->rn_name, "%s/%s", path, name); if (error == -1) { free(slice); continue; } slice->rn_vdev_guid = 0; slice->rn_lock = lock; slice->rn_avl = cache; slice->rn_hdl = hdl; slice->rn_order = i + IMPORT_ORDER_SCAN_OFFSET; slice->rn_labelpaths = B_FALSE; mutex_enter(lock); avl_add(cache, slice); mutex_exit(lock); } (void) closedir(dirp); } *slice_cache = cache; return (0); error: cookie = NULL; while ((slice = avl_destroy_nodes(cache, &cookie)) != NULL) { free(slice->rn_name); free(slice); } free(cache); return (error); } /* * Use libblkid to quickly enumerate all known zfs devices. */ static int zpool_find_import_blkid(libzfs_handle_t *hdl, kmutex_t *lock, avl_tree_t **slice_cache) { rdsk_node_t *slice; blkid_cache cache; blkid_dev_iterate iter; blkid_dev dev; avl_index_t where; int error; *slice_cache = NULL; error = blkid_get_cache(&cache, NULL); if (error != 0) return (error); error = blkid_probe_all_new(cache); if (error != 0) { blkid_put_cache(cache); return (error); } iter = blkid_dev_iterate_begin(cache); if (iter == NULL) { blkid_put_cache(cache); return (EINVAL); } error = blkid_dev_set_search(iter, "TYPE", "zfs_member"); if (error != 0) { blkid_dev_iterate_end(iter); blkid_put_cache(cache); return (error); } *slice_cache = zfs_alloc(hdl, sizeof (avl_tree_t)); avl_create(*slice_cache, slice_cache_compare, sizeof (rdsk_node_t), offsetof(rdsk_node_t, rn_node)); while (blkid_dev_next(iter, &dev) == 0) { slice = zfs_alloc(hdl, sizeof (rdsk_node_t)); slice->rn_name = zfs_strdup(hdl, blkid_dev_devname(dev)); slice->rn_vdev_guid = 0; slice->rn_lock = lock; slice->rn_avl = *slice_cache; slice->rn_hdl = hdl; slice->rn_labelpaths = B_TRUE; error = zfs_path_order(slice->rn_name, &slice->rn_order); if (error == 0) slice->rn_order += IMPORT_ORDER_SCAN_OFFSET; else slice->rn_order = IMPORT_ORDER_DEFAULT; mutex_enter(lock); if (avl_find(*slice_cache, slice, &where)) { free(slice->rn_name); free(slice); } else { avl_insert(*slice_cache, slice, where); } mutex_exit(lock); } blkid_dev_iterate_end(iter); blkid_put_cache(cache); return (0); } char * zpool_default_import_path[DEFAULT_IMPORT_PATH_SIZE] = { "/dev/disk/by-vdev", /* Custom rules, use first if they exist */ "/dev/mapper", /* Use multipath devices before components */ "/dev/disk/by-partlabel", /* Single unique entry set by user */ "/dev/disk/by-partuuid", /* Generated partition uuid */ "/dev/disk/by-label", /* Custom persistent labels */ "/dev/disk/by-uuid", /* Single unique entry and persistent */ "/dev/disk/by-id", /* May be multiple entries and persistent */ "/dev/disk/by-path", /* Encodes physical location and persistent */ "/dev" /* UNSAFE device names will change */ }; /* * Given a list of directories to search, find all pools stored on disk. This * includes partial pools which are not available to import. If no args are * given (argc is 0), then the default directory (/dev/dsk) is searched. * poolname or guid (but not both) are provided by the caller when trying * to import a specific pool. */ static nvlist_t * zpool_find_import_impl(libzfs_handle_t *hdl, importargs_t *iarg) { nvlist_t *ret = NULL; pool_list_t pools = { 0 }; pool_entry_t *pe, *penext; vdev_entry_t *ve, *venext; config_entry_t *ce, *cenext; name_entry_t *ne, *nenext; kmutex_t lock; avl_tree_t *cache; rdsk_node_t *slice; void *cookie; taskq_t *t; verify(iarg->poolname == NULL || iarg->guid == 0); mutex_init(&lock, NULL, MUTEX_DEFAULT, NULL); /* * Locate pool member vdevs using libblkid or by directory scanning. * On success a newly allocated AVL tree which is populated with an * entry for each discovered vdev will be returned as the cache. * It's the callers responsibility to consume and destroy this tree. */ if (iarg->scan || iarg->paths != 0) { int dirs = iarg->paths; char **dir = iarg->path; if (dirs == 0) { dir = zpool_default_import_path; dirs = DEFAULT_IMPORT_PATH_SIZE; } if (zpool_find_import_scan(hdl, &lock, &cache, dir, dirs) != 0) return (NULL); } else { if (zpool_find_import_blkid(hdl, &lock, &cache) != 0) return (NULL); } /* * Create a thread pool to parallelize the process of reading and * validating labels, a large number of threads can be used due to * minimal contention. */ t = taskq_create("z_import", 2 * boot_ncpus, defclsyspri, 2 * boot_ncpus, INT_MAX, TASKQ_PREPOPULATE); for (slice = avl_first(cache); slice; (slice = avl_walk(cache, slice, AVL_AFTER))) (void) taskq_dispatch(t, zpool_open_func, slice, TQ_SLEEP); taskq_wait(t); taskq_destroy(t); /* * Process the cache filtering out any entries which are not * for the specificed pool then adding matching label configs. */ cookie = NULL; while ((slice = avl_destroy_nodes(cache, &cookie)) != NULL) { if (slice->rn_config != NULL) { nvlist_t *config = slice->rn_config; boolean_t matched = B_TRUE; boolean_t aux = B_FALSE; int fd; /* * Check if it's a spare or l2cache device. If it is, * we need to skip the name and guid check since they * don't exist on aux device label. */ if (iarg->poolname != NULL || iarg->guid != 0) { uint64_t state; aux = nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &state) == 0 && (state == POOL_STATE_SPARE || state == POOL_STATE_L2CACHE); } if (iarg->poolname != NULL && !aux) { char *pname; matched = nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &pname) == 0 && strcmp(iarg->poolname, pname) == 0; } else if (iarg->guid != 0 && !aux) { uint64_t this_guid; matched = nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &this_guid) == 0 && iarg->guid == this_guid; } if (!matched) { nvlist_free(config); } else { /* * Verify all remaining entries can be opened * exclusively. This will prune all underlying * multipath devices which otherwise could * result in the vdev appearing as UNAVAIL. * * Under zdb, this step isn't required and * would prevent a zdb -e of active pools with * no cachefile. */ fd = open(slice->rn_name, O_RDONLY | O_EXCL); if (fd >= 0 || iarg->can_be_active) { if (fd >= 0) close(fd); add_config(hdl, &pools, slice->rn_name, slice->rn_order, slice->rn_num_labels, config); } else { nvlist_free(config); } } } free(slice->rn_name); free(slice); } avl_destroy(cache); free(cache); mutex_destroy(&lock); ret = get_configs(hdl, &pools, iarg->can_be_active); for (pe = pools.pools; pe != NULL; pe = penext) { penext = pe->pe_next; for (ve = pe->pe_vdevs; ve != NULL; ve = venext) { venext = ve->ve_next; for (ce = ve->ve_configs; ce != NULL; ce = cenext) { cenext = ce->ce_next; nvlist_free(ce->ce_config); free(ce); } free(ve); } free(pe); } for (ne = pools.names; ne != NULL; ne = nenext) { nenext = ne->ne_next; free(ne->ne_name); free(ne); } return (ret); } nvlist_t * zpool_find_import(libzfs_handle_t *hdl, int argc, char **argv) { importargs_t iarg = { 0 }; iarg.paths = argc; iarg.path = argv; return (zpool_find_import_impl(hdl, &iarg)); } /* * Given a cache file, return the contents as a list of importable pools. * poolname or guid (but not both) are provided by the caller when trying * to import a specific pool. */ nvlist_t * zpool_find_import_cached(libzfs_handle_t *hdl, const char *cachefile, char *poolname, uint64_t guid) { char *buf; int fd; struct stat64 statbuf; nvlist_t *raw, *src, *dst; nvlist_t *pools; nvpair_t *elem; char *name; uint64_t this_guid; boolean_t active; verify(poolname == NULL || guid == 0); if ((fd = open(cachefile, O_RDONLY)) < 0) { zfs_error_aux(hdl, "%s", strerror(errno)); (void) zfs_error(hdl, EZFS_BADCACHE, dgettext(TEXT_DOMAIN, "failed to open cache file")); return (NULL); } if (fstat64(fd, &statbuf) != 0) { zfs_error_aux(hdl, "%s", strerror(errno)); (void) close(fd); (void) zfs_error(hdl, EZFS_BADCACHE, dgettext(TEXT_DOMAIN, "failed to get size of cache file")); return (NULL); } if ((buf = zfs_alloc(hdl, statbuf.st_size)) == NULL) { (void) close(fd); return (NULL); } if (read(fd, buf, statbuf.st_size) != statbuf.st_size) { (void) close(fd); free(buf); (void) zfs_error(hdl, EZFS_BADCACHE, dgettext(TEXT_DOMAIN, "failed to read cache file contents")); return (NULL); } (void) close(fd); if (nvlist_unpack(buf, statbuf.st_size, &raw, 0) != 0) { free(buf); (void) zfs_error(hdl, EZFS_BADCACHE, dgettext(TEXT_DOMAIN, "invalid or corrupt cache file contents")); return (NULL); } free(buf); /* * Go through and get the current state of the pools and refresh their * state. */ if (nvlist_alloc(&pools, 0, 0) != 0) { (void) no_memory(hdl); nvlist_free(raw); return (NULL); } elem = NULL; while ((elem = nvlist_next_nvpair(raw, elem)) != NULL) { src = fnvpair_value_nvlist(elem); name = fnvlist_lookup_string(src, ZPOOL_CONFIG_POOL_NAME); if (poolname != NULL && strcmp(poolname, name) != 0) continue; this_guid = fnvlist_lookup_uint64(src, ZPOOL_CONFIG_POOL_GUID); if (guid != 0 && guid != this_guid) continue; if (pool_active(hdl, name, this_guid, &active) != 0) { nvlist_free(raw); nvlist_free(pools); return (NULL); } if (active) continue; if ((dst = refresh_config(hdl, src)) == NULL) { nvlist_free(raw); nvlist_free(pools); return (NULL); } if (nvlist_add_nvlist(pools, nvpair_name(elem), dst) != 0) { (void) no_memory(hdl); nvlist_free(dst); nvlist_free(raw); nvlist_free(pools); return (NULL); } nvlist_free(dst); } nvlist_free(raw); return (pools); } static int name_or_guid_exists(zpool_handle_t *zhp, void *data) { importargs_t *import = data; int found = 0; if (import->poolname != NULL) { char *pool_name; verify(nvlist_lookup_string(zhp->zpool_config, ZPOOL_CONFIG_POOL_NAME, &pool_name) == 0); if (strcmp(pool_name, import->poolname) == 0) found = 1; } else { uint64_t pool_guid; verify(nvlist_lookup_uint64(zhp->zpool_config, ZPOOL_CONFIG_POOL_GUID, &pool_guid) == 0); if (pool_guid == import->guid) found = 1; } zpool_close(zhp); return (found); } nvlist_t * zpool_search_import(libzfs_handle_t *hdl, importargs_t *import) { verify(import->poolname == NULL || import->guid == 0); if (import->unique) import->exists = zpool_iter(hdl, name_or_guid_exists, import); if (import->cachefile != NULL) return (zpool_find_import_cached(hdl, import->cachefile, import->poolname, import->guid)); return (zpool_find_import_impl(hdl, import)); } static boolean_t pool_match(nvlist_t *cfg, char *tgt) { uint64_t v, guid = strtoull(tgt, NULL, 0); char *s; if (guid != 0) { if (nvlist_lookup_uint64(cfg, ZPOOL_CONFIG_POOL_GUID, &v) == 0) return (v == guid); } else { if (nvlist_lookup_string(cfg, ZPOOL_CONFIG_POOL_NAME, &s) == 0) return (strcmp(s, tgt) == 0); } return (B_FALSE); } int zpool_tryimport(libzfs_handle_t *hdl, char *target, nvlist_t **configp, importargs_t *args) { nvlist_t *pools; nvlist_t *match = NULL; nvlist_t *config = NULL; char *name = NULL, *sepp = NULL; char sep = '\0'; int count = 0; char *targetdup = strdup(target); *configp = NULL; if ((sepp = strpbrk(targetdup, "/@")) != NULL) { sep = *sepp; *sepp = '\0'; } pools = zpool_search_import(hdl, args); if (pools != NULL) { nvpair_t *elem = NULL; while ((elem = nvlist_next_nvpair(pools, elem)) != NULL) { VERIFY0(nvpair_value_nvlist(elem, &config)); if (pool_match(config, targetdup)) { count++; if (match != NULL) { /* multiple matches found */ continue; } else { match = config; name = nvpair_name(elem); } } } } if (count == 0) { (void) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "no pools found")); free(targetdup); return (ENOENT); } if (count > 1) { (void) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "%d pools found, use pool GUID\n"), count); free(targetdup); return (EINVAL); } *configp = match; free(targetdup); return (0); } boolean_t find_guid(nvlist_t *nv, uint64_t guid) { uint64_t tmp; nvlist_t **child; uint_t c, children; verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &tmp) == 0); if (tmp == guid) return (B_TRUE); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) if (find_guid(child[c], guid)) return (B_TRUE); } return (B_FALSE); } typedef struct aux_cbdata { const char *cb_type; uint64_t cb_guid; zpool_handle_t *cb_zhp; } aux_cbdata_t; static int find_aux(zpool_handle_t *zhp, void *data) { aux_cbdata_t *cbp = data; nvlist_t **list; uint_t i, count; uint64_t guid; nvlist_t *nvroot; verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (nvlist_lookup_nvlist_array(nvroot, cbp->cb_type, &list, &count) == 0) { for (i = 0; i < count; i++) { verify(nvlist_lookup_uint64(list[i], ZPOOL_CONFIG_GUID, &guid) == 0); if (guid == cbp->cb_guid) { cbp->cb_zhp = zhp; return (1); } } } zpool_close(zhp); return (0); } /* * Determines if the pool is in use. If so, it returns true and the state of * the pool as well as the name of the pool. Name string is allocated and * must be freed by the caller. */ int zpool_in_use(libzfs_handle_t *hdl, int fd, pool_state_t *state, char **namestr, boolean_t *inuse) { nvlist_t *config; char *name; boolean_t ret; uint64_t guid, vdev_guid; zpool_handle_t *zhp; nvlist_t *pool_config; uint64_t stateval, isspare; aux_cbdata_t cb = { 0 }; boolean_t isactive; *inuse = B_FALSE; if (zpool_read_label(fd, &config, NULL) != 0) { (void) no_memory(hdl); return (-1); } if (config == NULL) return (0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &stateval) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_GUID, &vdev_guid) == 0); if (stateval != POOL_STATE_SPARE && stateval != POOL_STATE_L2CACHE) { verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); } switch (stateval) { case POOL_STATE_EXPORTED: /* * A pool with an exported state may in fact be imported * read-only, so check the in-core state to see if it's * active and imported read-only. If it is, set * its state to active. */ if (pool_active(hdl, name, guid, &isactive) == 0 && isactive && (zhp = zpool_open_canfail(hdl, name)) != NULL) { if (zpool_get_prop_int(zhp, ZPOOL_PROP_READONLY, NULL)) stateval = POOL_STATE_ACTIVE; /* * All we needed the zpool handle for is the * readonly prop check. */ zpool_close(zhp); } ret = B_TRUE; break; case POOL_STATE_ACTIVE: /* * For an active pool, we have to determine if it's really part * of a currently active pool (in which case the pool will exist * and the guid will be the same), or whether it's part of an * active pool that was disconnected without being explicitly * exported. */ if (pool_active(hdl, name, guid, &isactive) != 0) { nvlist_free(config); return (-1); } if (isactive) { /* * Because the device may have been removed while * offlined, we only report it as active if the vdev is * still present in the config. Otherwise, pretend like * it's not in use. */ if ((zhp = zpool_open_canfail(hdl, name)) != NULL && (pool_config = zpool_get_config(zhp, NULL)) != NULL) { nvlist_t *nvroot; verify(nvlist_lookup_nvlist(pool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); ret = find_guid(nvroot, vdev_guid); } else { ret = B_FALSE; } /* * If this is an active spare within another pool, we * treat it like an unused hot spare. This allows the * user to create a pool with a hot spare that currently * in use within another pool. Since we return B_TRUE, * libdiskmgt will continue to prevent generic consumers * from using the device. */ if (ret && nvlist_lookup_uint64(config, ZPOOL_CONFIG_IS_SPARE, &isspare) == 0 && isspare) stateval = POOL_STATE_SPARE; if (zhp != NULL) zpool_close(zhp); } else { stateval = POOL_STATE_POTENTIALLY_ACTIVE; ret = B_TRUE; } break; case POOL_STATE_SPARE: /* * For a hot spare, it can be either definitively in use, or * potentially active. To determine if it's in use, we iterate * over all pools in the system and search for one with a spare * with a matching guid. * * Due to the shared nature of spares, we don't actually report * the potentially active case as in use. This means the user * can freely create pools on the hot spares of exported pools, * but to do otherwise makes the resulting code complicated, and * we end up having to deal with this case anyway. */ cb.cb_zhp = NULL; cb.cb_guid = vdev_guid; cb.cb_type = ZPOOL_CONFIG_SPARES; if (zpool_iter(hdl, find_aux, &cb) == 1) { name = (char *)zpool_get_name(cb.cb_zhp); ret = B_TRUE; } else { ret = B_FALSE; } break; case POOL_STATE_L2CACHE: /* * Check if any pool is currently using this l2cache device. */ cb.cb_zhp = NULL; cb.cb_guid = vdev_guid; cb.cb_type = ZPOOL_CONFIG_L2CACHE; if (zpool_iter(hdl, find_aux, &cb) == 1) { name = (char *)zpool_get_name(cb.cb_zhp); ret = B_TRUE; } else { ret = B_FALSE; } break; default: ret = B_FALSE; } if (ret) { if ((*namestr = zfs_strdup(hdl, name)) == NULL) { if (cb.cb_zhp) zpool_close(cb.cb_zhp); nvlist_free(config); return (-1); } *state = (pool_state_t)stateval; } if (cb.cb_zhp) zpool_close(cb.cb_zhp); nvlist_free(config); *inuse = ret; return (0); }