/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2015 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright 2015 RackTop Systems. * Copyright (c) 2016, Intel Corporation. * Copyright (c) 2021, Colm Buckley */ /* * Pool import support functions. * * Used by zpool, ztest, zdb, and zhack to locate importable configs. Since * these commands are expected to run in the global zone, we can assume * that the devices are all readable when called. * * To import a pool, we rely on reading the configuration information from the * ZFS label of each device. If we successfully read the label, then we * organize the configuration information in the following hierarchy: * * pool guid -> toplevel vdev guid -> label txg * * Duplicate entries matching this same tuple will be discarded. Once we have * examined every device, we pick the best label txg config for each toplevel * vdev. We then arrange these toplevel vdevs into a complete pool config, and * update any paths that have changed. Finally, we attempt to import the pool * using our derived config, and record the results. */ #ifdef HAVE_AIO_H #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zutil_import.h" const char * libpc_error_description(libpc_handle_t *hdl) { if (hdl->lpc_desc[0] != '\0') return (hdl->lpc_desc); switch (hdl->lpc_error) { case LPC_BADCACHE: return (dgettext(TEXT_DOMAIN, "invalid or missing cache file")); case LPC_BADPATH: return (dgettext(TEXT_DOMAIN, "must be an absolute path")); case LPC_NOMEM: return (dgettext(TEXT_DOMAIN, "out of memory")); case LPC_EACCESS: return (dgettext(TEXT_DOMAIN, "some devices require root " "privileges")); case LPC_UNKNOWN: return (dgettext(TEXT_DOMAIN, "unknown error")); default: assert(hdl->lpc_error == 0); return (dgettext(TEXT_DOMAIN, "no error")); } } static __attribute__((format(printf, 2, 3))) void zutil_error_aux(libpc_handle_t *hdl, const char *fmt, ...) { va_list ap; va_start(ap, fmt); (void) vsnprintf(hdl->lpc_desc, sizeof (hdl->lpc_desc), fmt, ap); hdl->lpc_desc_active = B_TRUE; va_end(ap); } static void zutil_verror(libpc_handle_t *hdl, lpc_error_t error, const char *fmt, va_list ap) { char action[1024]; (void) vsnprintf(action, sizeof (action), fmt, ap); hdl->lpc_error = error; if (hdl->lpc_desc_active) hdl->lpc_desc_active = B_FALSE; else hdl->lpc_desc[0] = '\0'; if (hdl->lpc_printerr) (void) fprintf(stderr, "%s: %s\n", action, libpc_error_description(hdl)); } static __attribute__((format(printf, 3, 4))) int zutil_error_fmt(libpc_handle_t *hdl, lpc_error_t error, const char *fmt, ...) { va_list ap; va_start(ap, fmt); zutil_verror(hdl, error, fmt, ap); va_end(ap); return (-1); } static int zutil_error(libpc_handle_t *hdl, lpc_error_t error, const char *msg) { return (zutil_error_fmt(hdl, error, "%s", msg)); } static int zutil_no_memory(libpc_handle_t *hdl) { zutil_error(hdl, LPC_NOMEM, "internal error"); exit(1); } void * zutil_alloc(libpc_handle_t *hdl, size_t size) { void *data; if ((data = calloc(1, size)) == NULL) (void) zutil_no_memory(hdl); return (data); } char * zutil_strdup(libpc_handle_t *hdl, const char *str) { char *ret; if ((ret = strdup(str)) == NULL) (void) zutil_no_memory(hdl); return (ret); } static char * zutil_strndup(libpc_handle_t *hdl, const char *str, size_t n) { char *ret; if ((ret = strndup(str, n)) == NULL) (void) zutil_no_memory(hdl); return (ret); } /* * Intermediate structures used to gather configuration information. */ typedef struct config_entry { uint64_t ce_txg; nvlist_t *ce_config; struct config_entry *ce_next; } config_entry_t; typedef struct vdev_entry { uint64_t ve_guid; config_entry_t *ve_configs; struct vdev_entry *ve_next; } vdev_entry_t; typedef struct pool_entry { uint64_t pe_guid; vdev_entry_t *pe_vdevs; struct pool_entry *pe_next; } pool_entry_t; typedef struct name_entry { char *ne_name; uint64_t ne_guid; uint64_t ne_order; uint64_t ne_num_labels; struct name_entry *ne_next; } name_entry_t; typedef struct pool_list { pool_entry_t *pools; name_entry_t *names; } pool_list_t; /* * Go through and fix up any path and/or devid information for the given vdev * configuration. */ static int fix_paths(libpc_handle_t *hdl, nvlist_t *nv, name_entry_t *names) { nvlist_t **child; uint_t c, children; uint64_t guid; name_entry_t *ne, *best; const char *path; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) if (fix_paths(hdl, child[c], names) != 0) return (-1); return (0); } /* * This is a leaf (file or disk) vdev. In either case, go through * the name list and see if we find a matching guid. If so, replace * the path and see if we can calculate a new devid. * * There may be multiple names associated with a particular guid, in * which case we have overlapping partitions or multiple paths to the * same disk. In this case we prefer to use the path name which * matches the ZPOOL_CONFIG_PATH. If no matching entry is found we * use the lowest order device which corresponds to the first match * while traversing the ZPOOL_IMPORT_PATH search path. */ verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) == 0); if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) != 0) path = NULL; best = NULL; for (ne = names; ne != NULL; ne = ne->ne_next) { if (ne->ne_guid == guid) { if (path == NULL) { best = ne; break; } if ((strlen(path) == strlen(ne->ne_name)) && strncmp(path, ne->ne_name, strlen(path)) == 0) { best = ne; break; } if (best == NULL) { best = ne; continue; } /* Prefer paths with move vdev labels. */ if (ne->ne_num_labels > best->ne_num_labels) { best = ne; continue; } /* Prefer paths earlier in the search order. */ if (ne->ne_num_labels == best->ne_num_labels && ne->ne_order < best->ne_order) { best = ne; continue; } } } if (best == NULL) return (0); if (nvlist_add_string(nv, ZPOOL_CONFIG_PATH, best->ne_name) != 0) return (-1); update_vdev_config_dev_strs(nv); return (0); } /* * Add the given configuration to the list of known devices. */ static int add_config(libpc_handle_t *hdl, pool_list_t *pl, const char *path, int order, int num_labels, nvlist_t *config) { uint64_t pool_guid, vdev_guid, top_guid, txg, state; pool_entry_t *pe; vdev_entry_t *ve; config_entry_t *ce; name_entry_t *ne; /* * If this is a hot spare not currently in use or level 2 cache * device, add it to the list of names to translate, but don't do * anything else. */ if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &state) == 0 && (state == POOL_STATE_SPARE || state == POOL_STATE_L2CACHE) && nvlist_lookup_uint64(config, ZPOOL_CONFIG_GUID, &vdev_guid) == 0) { if ((ne = zutil_alloc(hdl, sizeof (name_entry_t))) == NULL) return (-1); if ((ne->ne_name = zutil_strdup(hdl, path)) == NULL) { free(ne); return (-1); } ne->ne_guid = vdev_guid; ne->ne_order = order; ne->ne_num_labels = num_labels; ne->ne_next = pl->names; pl->names = ne; return (0); } /* * If we have a valid config but cannot read any of these fields, then * it means we have a half-initialized label. In vdev_label_init() * we write a label with txg == 0 so that we can identify the device * in case the user refers to the same disk later on. If we fail to * create the pool, we'll be left with a label in this state * which should not be considered part of a valid pool. */ if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &pool_guid) != 0 || nvlist_lookup_uint64(config, ZPOOL_CONFIG_GUID, &vdev_guid) != 0 || nvlist_lookup_uint64(config, ZPOOL_CONFIG_TOP_GUID, &top_guid) != 0 || nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_TXG, &txg) != 0 || txg == 0) { return (0); } /* * First, see if we know about this pool. If not, then add it to the * list of known pools. */ for (pe = pl->pools; pe != NULL; pe = pe->pe_next) { if (pe->pe_guid == pool_guid) break; } if (pe == NULL) { if ((pe = zutil_alloc(hdl, sizeof (pool_entry_t))) == NULL) { return (-1); } pe->pe_guid = pool_guid; pe->pe_next = pl->pools; pl->pools = pe; } /* * Second, see if we know about this toplevel vdev. Add it if its * missing. */ for (ve = pe->pe_vdevs; ve != NULL; ve = ve->ve_next) { if (ve->ve_guid == top_guid) break; } if (ve == NULL) { if ((ve = zutil_alloc(hdl, sizeof (vdev_entry_t))) == NULL) { return (-1); } ve->ve_guid = top_guid; ve->ve_next = pe->pe_vdevs; pe->pe_vdevs = ve; } /* * Third, see if we have a config with a matching transaction group. If * so, then we do nothing. Otherwise, add it to the list of known * configs. */ for (ce = ve->ve_configs; ce != NULL; ce = ce->ce_next) { if (ce->ce_txg == txg) break; } if (ce == NULL) { if ((ce = zutil_alloc(hdl, sizeof (config_entry_t))) == NULL) { return (-1); } ce->ce_txg = txg; ce->ce_config = fnvlist_dup(config); ce->ce_next = ve->ve_configs; ve->ve_configs = ce; } /* * At this point we've successfully added our config to the list of * known configs. The last thing to do is add the vdev guid -> path * mappings so that we can fix up the configuration as necessary before * doing the import. */ if ((ne = zutil_alloc(hdl, sizeof (name_entry_t))) == NULL) return (-1); if ((ne->ne_name = zutil_strdup(hdl, path)) == NULL) { free(ne); return (-1); } ne->ne_guid = vdev_guid; ne->ne_order = order; ne->ne_num_labels = num_labels; ne->ne_next = pl->names; pl->names = ne; return (0); } static int zutil_pool_active(libpc_handle_t *hdl, const char *name, uint64_t guid, boolean_t *isactive) { ASSERT(hdl->lpc_ops->pco_pool_active != NULL); int error = hdl->lpc_ops->pco_pool_active(hdl->lpc_lib_handle, name, guid, isactive); return (error); } static nvlist_t * zutil_refresh_config(libpc_handle_t *hdl, nvlist_t *tryconfig) { ASSERT(hdl->lpc_ops->pco_refresh_config != NULL); return (hdl->lpc_ops->pco_refresh_config(hdl->lpc_lib_handle, tryconfig)); } /* * Determine if the vdev id is a hole in the namespace. */ static boolean_t vdev_is_hole(uint64_t *hole_array, uint_t holes, uint_t id) { int c; for (c = 0; c < holes; c++) { /* Top-level is a hole */ if (hole_array[c] == id) return (B_TRUE); } return (B_FALSE); } /* * Convert our list of pools into the definitive set of configurations. We * start by picking the best config for each toplevel vdev. Once that's done, * we assemble the toplevel vdevs into a full config for the pool. We make a * pass to fix up any incorrect paths, and then add it to the main list to * return to the user. */ static nvlist_t * get_configs(libpc_handle_t *hdl, pool_list_t *pl, boolean_t active_ok, nvlist_t *policy) { pool_entry_t *pe; vdev_entry_t *ve; config_entry_t *ce; nvlist_t *ret = NULL, *config = NULL, *tmp = NULL, *nvtop, *nvroot; nvlist_t **spares, **l2cache; uint_t i, nspares, nl2cache; boolean_t config_seen; uint64_t best_txg; const char *name, *hostname = NULL; uint64_t guid; uint_t children = 0; nvlist_t **child = NULL; uint64_t *hole_array, max_id; uint_t c; boolean_t isactive; nvlist_t *nvl; boolean_t valid_top_config = B_FALSE; if (nvlist_alloc(&ret, 0, 0) != 0) goto nomem; for (pe = pl->pools; pe != NULL; pe = pe->pe_next) { uint64_t id, max_txg = 0, hostid = 0; uint_t holes = 0; if (nvlist_alloc(&config, NV_UNIQUE_NAME, 0) != 0) goto nomem; config_seen = B_FALSE; /* * Iterate over all toplevel vdevs. Grab the pool configuration * from the first one we find, and then go through the rest and * add them as necessary to the 'vdevs' member of the config. */ for (ve = pe->pe_vdevs; ve != NULL; ve = ve->ve_next) { /* * Determine the best configuration for this vdev by * selecting the config with the latest transaction * group. */ best_txg = 0; for (ce = ve->ve_configs; ce != NULL; ce = ce->ce_next) { if (ce->ce_txg > best_txg) { tmp = ce->ce_config; best_txg = ce->ce_txg; } } /* * We rely on the fact that the max txg for the * pool will contain the most up-to-date information * about the valid top-levels in the vdev namespace. */ if (best_txg > max_txg) { (void) nvlist_remove(config, ZPOOL_CONFIG_VDEV_CHILDREN, DATA_TYPE_UINT64); (void) nvlist_remove(config, ZPOOL_CONFIG_HOLE_ARRAY, DATA_TYPE_UINT64_ARRAY); max_txg = best_txg; hole_array = NULL; holes = 0; max_id = 0; valid_top_config = B_FALSE; if (nvlist_lookup_uint64(tmp, ZPOOL_CONFIG_VDEV_CHILDREN, &max_id) == 0) { verify(nvlist_add_uint64(config, ZPOOL_CONFIG_VDEV_CHILDREN, max_id) == 0); valid_top_config = B_TRUE; } if (nvlist_lookup_uint64_array(tmp, ZPOOL_CONFIG_HOLE_ARRAY, &hole_array, &holes) == 0) { verify(nvlist_add_uint64_array(config, ZPOOL_CONFIG_HOLE_ARRAY, hole_array, holes) == 0); } } if (!config_seen) { /* * Copy the relevant pieces of data to the pool * configuration: * * version * pool guid * name * comment (if available) * compatibility features (if available) * pool state * hostid (if available) * hostname (if available) */ uint64_t state, version; const char *comment = NULL; const char *compatibility = NULL; version = fnvlist_lookup_uint64(tmp, ZPOOL_CONFIG_VERSION); fnvlist_add_uint64(config, ZPOOL_CONFIG_VERSION, version); guid = fnvlist_lookup_uint64(tmp, ZPOOL_CONFIG_POOL_GUID); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_GUID, guid); name = fnvlist_lookup_string(tmp, ZPOOL_CONFIG_POOL_NAME); fnvlist_add_string(config, ZPOOL_CONFIG_POOL_NAME, name); if (nvlist_lookup_string(tmp, ZPOOL_CONFIG_COMMENT, &comment) == 0) fnvlist_add_string(config, ZPOOL_CONFIG_COMMENT, comment); if (nvlist_lookup_string(tmp, ZPOOL_CONFIG_COMPATIBILITY, &compatibility) == 0) fnvlist_add_string(config, ZPOOL_CONFIG_COMPATIBILITY, compatibility); state = fnvlist_lookup_uint64(tmp, ZPOOL_CONFIG_POOL_STATE); fnvlist_add_uint64(config, ZPOOL_CONFIG_POOL_STATE, state); hostid = 0; if (nvlist_lookup_uint64(tmp, ZPOOL_CONFIG_HOSTID, &hostid) == 0) { fnvlist_add_uint64(config, ZPOOL_CONFIG_HOSTID, hostid); hostname = fnvlist_lookup_string(tmp, ZPOOL_CONFIG_HOSTNAME); fnvlist_add_string(config, ZPOOL_CONFIG_HOSTNAME, hostname); } config_seen = B_TRUE; } /* * Add this top-level vdev to the child array. */ verify(nvlist_lookup_nvlist(tmp, ZPOOL_CONFIG_VDEV_TREE, &nvtop) == 0); verify(nvlist_lookup_uint64(nvtop, ZPOOL_CONFIG_ID, &id) == 0); if (id >= children) { nvlist_t **newchild; newchild = zutil_alloc(hdl, (id + 1) * sizeof (nvlist_t *)); if (newchild == NULL) goto nomem; for (c = 0; c < children; c++) newchild[c] = child[c]; free(child); child = newchild; children = id + 1; } if (nvlist_dup(nvtop, &child[id], 0) != 0) goto nomem; } /* * If we have information about all the top-levels then * clean up the nvlist which we've constructed. This * means removing any extraneous devices that are * beyond the valid range or adding devices to the end * of our array which appear to be missing. */ if (valid_top_config) { if (max_id < children) { for (c = max_id; c < children; c++) nvlist_free(child[c]); children = max_id; } else if (max_id > children) { nvlist_t **newchild; newchild = zutil_alloc(hdl, (max_id) * sizeof (nvlist_t *)); if (newchild == NULL) goto nomem; for (c = 0; c < children; c++) newchild[c] = child[c]; free(child); child = newchild; children = max_id; } } verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); /* * The vdev namespace may contain holes as a result of * device removal. We must add them back into the vdev * tree before we process any missing devices. */ if (holes > 0) { ASSERT(valid_top_config); for (c = 0; c < children; c++) { nvlist_t *holey; if (child[c] != NULL || !vdev_is_hole(hole_array, holes, c)) continue; if (nvlist_alloc(&holey, NV_UNIQUE_NAME, 0) != 0) goto nomem; /* * Holes in the namespace are treated as * "hole" top-level vdevs and have a * special flag set on them. */ if (nvlist_add_string(holey, ZPOOL_CONFIG_TYPE, VDEV_TYPE_HOLE) != 0 || nvlist_add_uint64(holey, ZPOOL_CONFIG_ID, c) != 0 || nvlist_add_uint64(holey, ZPOOL_CONFIG_GUID, 0ULL) != 0) { nvlist_free(holey); goto nomem; } child[c] = holey; } } /* * Look for any missing top-level vdevs. If this is the case, * create a faked up 'missing' vdev as a placeholder. We cannot * simply compress the child array, because the kernel performs * certain checks to make sure the vdev IDs match their location * in the configuration. */ for (c = 0; c < children; c++) { if (child[c] == NULL) { nvlist_t *missing; if (nvlist_alloc(&missing, NV_UNIQUE_NAME, 0) != 0) goto nomem; if (nvlist_add_string(missing, ZPOOL_CONFIG_TYPE, VDEV_TYPE_MISSING) != 0 || nvlist_add_uint64(missing, ZPOOL_CONFIG_ID, c) != 0 || nvlist_add_uint64(missing, ZPOOL_CONFIG_GUID, 0ULL) != 0) { nvlist_free(missing); goto nomem; } child[c] = missing; } } /* * Put all of this pool's top-level vdevs into a root vdev. */ if (nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) != 0) goto nomem; if (nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) != 0 || nvlist_add_uint64(nvroot, ZPOOL_CONFIG_ID, 0ULL) != 0 || nvlist_add_uint64(nvroot, ZPOOL_CONFIG_GUID, guid) != 0 || nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)child, children) != 0) { nvlist_free(nvroot); goto nomem; } for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); children = 0; child = NULL; /* * Go through and fix up any paths and/or devids based on our * known list of vdev GUID -> path mappings. */ if (fix_paths(hdl, nvroot, pl->names) != 0) { nvlist_free(nvroot); goto nomem; } /* * Add the root vdev to this pool's configuration. */ if (nvlist_add_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, nvroot) != 0) { nvlist_free(nvroot); goto nomem; } nvlist_free(nvroot); /* * zdb uses this path to report on active pools that were * imported or created using -R. */ if (active_ok) goto add_pool; /* * Determine if this pool is currently active, in which case we * can't actually import it. */ verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); if (zutil_pool_active(hdl, name, guid, &isactive) != 0) goto error; if (isactive) { nvlist_free(config); config = NULL; continue; } if (policy != NULL) { if (nvlist_add_nvlist(config, ZPOOL_LOAD_POLICY, policy) != 0) goto nomem; } if ((nvl = zutil_refresh_config(hdl, config)) == NULL) { nvlist_free(config); config = NULL; continue; } nvlist_free(config); config = nvl; /* * Go through and update the paths for spares, now that we have * them. */ verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { for (i = 0; i < nspares; i++) { if (fix_paths(hdl, spares[i], pl->names) != 0) goto nomem; } } /* * Update the paths for l2cache devices. */ if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0) { for (i = 0; i < nl2cache; i++) { if (fix_paths(hdl, l2cache[i], pl->names) != 0) goto nomem; } } /* * Restore the original information read from the actual label. */ (void) nvlist_remove(config, ZPOOL_CONFIG_HOSTID, DATA_TYPE_UINT64); (void) nvlist_remove(config, ZPOOL_CONFIG_HOSTNAME, DATA_TYPE_STRING); if (hostid != 0) { verify(nvlist_add_uint64(config, ZPOOL_CONFIG_HOSTID, hostid) == 0); verify(nvlist_add_string(config, ZPOOL_CONFIG_HOSTNAME, hostname) == 0); } add_pool: /* * Add this pool to the list of configs. */ verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); if (nvlist_add_nvlist(ret, name, config) != 0) goto nomem; nvlist_free(config); config = NULL; } return (ret); nomem: (void) zutil_no_memory(hdl); error: nvlist_free(config); nvlist_free(ret); for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); return (NULL); } /* * Return the offset of the given label. */ static uint64_t label_offset(uint64_t size, int l) { ASSERT(P2PHASE_TYPED(size, sizeof (vdev_label_t), uint64_t) == 0); return (l * sizeof (vdev_label_t) + (l < VDEV_LABELS / 2 ? 0 : size - VDEV_LABELS * sizeof (vdev_label_t))); } /* * The same description applies as to zpool_read_label below, * except here we do it without aio, presumably because an aio call * errored out in a way we think not using it could circumvent. */ static int zpool_read_label_slow(int fd, nvlist_t **config, int *num_labels) { struct stat64 statbuf; int l, count = 0; vdev_phys_t *label; nvlist_t *expected_config = NULL; uint64_t expected_guid = 0, size; *config = NULL; if (fstat64_blk(fd, &statbuf) == -1) return (0); size = P2ALIGN_TYPED(statbuf.st_size, sizeof (vdev_label_t), uint64_t); label = (vdev_phys_t *)umem_alloc_aligned(sizeof (*label), PAGESIZE, UMEM_DEFAULT); if (label == NULL) return (-1); for (l = 0; l < VDEV_LABELS; l++) { uint64_t state, guid, txg; off_t offset = label_offset(size, l) + VDEV_SKIP_SIZE; if (pread64(fd, label, sizeof (vdev_phys_t), offset) != sizeof (vdev_phys_t)) continue; if (nvlist_unpack(label->vp_nvlist, sizeof (label->vp_nvlist), config, 0) != 0) continue; if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_GUID, &guid) != 0 || guid == 0) { nvlist_free(*config); continue; } if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_STATE, &state) != 0 || state > POOL_STATE_L2CACHE) { nvlist_free(*config); continue; } if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE && (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_TXG, &txg) != 0 || txg == 0)) { nvlist_free(*config); continue; } if (expected_guid) { if (expected_guid == guid) count++; nvlist_free(*config); } else { expected_config = *config; expected_guid = guid; count++; } } if (num_labels != NULL) *num_labels = count; umem_free_aligned(label, sizeof (*label)); *config = expected_config; return (0); } /* * Given a file descriptor, read the label information and return an nvlist * describing the configuration, if there is one. The number of valid * labels found will be returned in num_labels when non-NULL. */ int zpool_read_label(int fd, nvlist_t **config, int *num_labels) { #ifndef HAVE_AIO_H return (zpool_read_label_slow(fd, config, num_labels)); #else struct stat64 statbuf; struct aiocb aiocbs[VDEV_LABELS]; struct aiocb *aiocbps[VDEV_LABELS]; vdev_phys_t *labels; nvlist_t *expected_config = NULL; uint64_t expected_guid = 0, size; int error, l, count = 0; *config = NULL; if (fstat64_blk(fd, &statbuf) == -1) return (0); size = P2ALIGN_TYPED(statbuf.st_size, sizeof (vdev_label_t), uint64_t); labels = (vdev_phys_t *)umem_alloc_aligned( VDEV_LABELS * sizeof (*labels), PAGESIZE, UMEM_DEFAULT); if (labels == NULL) return (-1); memset(aiocbs, 0, sizeof (aiocbs)); for (l = 0; l < VDEV_LABELS; l++) { off_t offset = label_offset(size, l) + VDEV_SKIP_SIZE; aiocbs[l].aio_fildes = fd; aiocbs[l].aio_offset = offset; aiocbs[l].aio_buf = &labels[l]; aiocbs[l].aio_nbytes = sizeof (vdev_phys_t); aiocbs[l].aio_lio_opcode = LIO_READ; aiocbps[l] = &aiocbs[l]; } if (lio_listio(LIO_WAIT, aiocbps, VDEV_LABELS, NULL) != 0) { int saved_errno = errno; boolean_t do_slow = B_FALSE; error = -1; if (errno == EAGAIN || errno == EINTR || errno == EIO) { /* * A portion of the requests may have been submitted. * Clean them up. */ for (l = 0; l < VDEV_LABELS; l++) { errno = 0; switch (aio_error(&aiocbs[l])) { case EINVAL: break; case EINPROGRESS: // This shouldn't be possible to // encounter, die if we do. ASSERT(B_FALSE); zfs_fallthrough; case EOPNOTSUPP: case ENOSYS: do_slow = B_TRUE; zfs_fallthrough; case 0: default: (void) aio_return(&aiocbs[l]); } } } if (do_slow) { /* * At least some IO involved access unsafe-for-AIO * files. Let's try again, without AIO this time. */ error = zpool_read_label_slow(fd, config, num_labels); saved_errno = errno; } umem_free_aligned(labels, VDEV_LABELS * sizeof (*labels)); errno = saved_errno; return (error); } for (l = 0; l < VDEV_LABELS; l++) { uint64_t state, guid, txg; if (aio_return(&aiocbs[l]) != sizeof (vdev_phys_t)) continue; if (nvlist_unpack(labels[l].vp_nvlist, sizeof (labels[l].vp_nvlist), config, 0) != 0) continue; if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_GUID, &guid) != 0 || guid == 0) { nvlist_free(*config); continue; } if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_STATE, &state) != 0 || state > POOL_STATE_L2CACHE) { nvlist_free(*config); continue; } if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE && (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_TXG, &txg) != 0 || txg == 0)) { nvlist_free(*config); continue; } if (expected_guid) { if (expected_guid == guid) count++; nvlist_free(*config); } else { expected_config = *config; expected_guid = guid; count++; } } if (num_labels != NULL) *num_labels = count; umem_free_aligned(labels, VDEV_LABELS * sizeof (*labels)); *config = expected_config; return (0); #endif } /* * Sorted by full path and then vdev guid to allow for multiple entries with * the same full path name. This is required because it's possible to * have multiple block devices with labels that refer to the same * ZPOOL_CONFIG_PATH yet have different vdev guids. In this case both * entries need to be added to the cache. Scenarios where this can occur * include overwritten pool labels, devices which are visible from multiple * hosts and multipath devices. */ int slice_cache_compare(const void *arg1, const void *arg2) { const char *nm1 = ((rdsk_node_t *)arg1)->rn_name; const char *nm2 = ((rdsk_node_t *)arg2)->rn_name; uint64_t guid1 = ((rdsk_node_t *)arg1)->rn_vdev_guid; uint64_t guid2 = ((rdsk_node_t *)arg2)->rn_vdev_guid; int rv; rv = TREE_ISIGN(strcmp(nm1, nm2)); if (rv) return (rv); return (TREE_CMP(guid1, guid2)); } static int label_paths_impl(libpc_handle_t *hdl, nvlist_t *nvroot, uint64_t pool_guid, uint64_t vdev_guid, const char **path, const char **devid) { nvlist_t **child; uint_t c, children; uint64_t guid; const char *val; int error; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) { error = label_paths_impl(hdl, child[c], pool_guid, vdev_guid, path, devid); if (error) return (error); } return (0); } if (nvroot == NULL) return (0); error = nvlist_lookup_uint64(nvroot, ZPOOL_CONFIG_GUID, &guid); if ((error != 0) || (guid != vdev_guid)) return (0); error = nvlist_lookup_string(nvroot, ZPOOL_CONFIG_PATH, &val); if (error == 0) *path = val; error = nvlist_lookup_string(nvroot, ZPOOL_CONFIG_DEVID, &val); if (error == 0) *devid = val; return (0); } /* * Given a disk label fetch the ZPOOL_CONFIG_PATH and ZPOOL_CONFIG_DEVID * and store these strings as config_path and devid_path respectively. * The returned pointers are only valid as long as label remains valid. */ int label_paths(libpc_handle_t *hdl, nvlist_t *label, const char **path, const char **devid) { nvlist_t *nvroot; uint64_t pool_guid; uint64_t vdev_guid; *path = NULL; *devid = NULL; if (nvlist_lookup_nvlist(label, ZPOOL_CONFIG_VDEV_TREE, &nvroot) || nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_GUID, &pool_guid) || nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &vdev_guid)) return (ENOENT); return (label_paths_impl(hdl, nvroot, pool_guid, vdev_guid, path, devid)); } static void zpool_find_import_scan_add_slice(libpc_handle_t *hdl, pthread_mutex_t *lock, avl_tree_t *cache, const char *path, const char *name, int order) { avl_index_t where; rdsk_node_t *slice; slice = zutil_alloc(hdl, sizeof (rdsk_node_t)); if (asprintf(&slice->rn_name, "%s/%s", path, name) == -1) { free(slice); return; } slice->rn_vdev_guid = 0; slice->rn_lock = lock; slice->rn_avl = cache; slice->rn_hdl = hdl; slice->rn_order = order + IMPORT_ORDER_SCAN_OFFSET; slice->rn_labelpaths = B_FALSE; pthread_mutex_lock(lock); if (avl_find(cache, slice, &where)) { free(slice->rn_name); free(slice); } else { avl_insert(cache, slice, where); } pthread_mutex_unlock(lock); } static int zpool_find_import_scan_dir(libpc_handle_t *hdl, pthread_mutex_t *lock, avl_tree_t *cache, const char *dir, int order) { int error; char path[MAXPATHLEN]; struct dirent64 *dp; DIR *dirp; if (realpath(dir, path) == NULL) { error = errno; if (error == ENOENT) return (0); zutil_error_aux(hdl, "%s", strerror(error)); (void) zutil_error_fmt(hdl, LPC_BADPATH, dgettext(TEXT_DOMAIN, "cannot resolve path '%s'"), dir); return (error); } dirp = opendir(path); if (dirp == NULL) { error = errno; zutil_error_aux(hdl, "%s", strerror(error)); (void) zutil_error_fmt(hdl, LPC_BADPATH, dgettext(TEXT_DOMAIN, "cannot open '%s'"), path); return (error); } while ((dp = readdir64(dirp)) != NULL) { const char *name = dp->d_name; if (strcmp(name, ".") == 0 || strcmp(name, "..") == 0) continue; switch (dp->d_type) { case DT_UNKNOWN: case DT_BLK: case DT_LNK: #ifdef __FreeBSD__ case DT_CHR: #endif case DT_REG: break; default: continue; } zpool_find_import_scan_add_slice(hdl, lock, cache, path, name, order); } (void) closedir(dirp); return (0); } static int zpool_find_import_scan_path(libpc_handle_t *hdl, pthread_mutex_t *lock, avl_tree_t *cache, const char *dir, int order) { int error = 0; char path[MAXPATHLEN]; char *d = NULL; ssize_t dl; const char *dpath, *name; /* * Separate the directory and the basename. * We do this so that we can get the realpath of * the directory. We don't get the realpath on the * whole path because if it's a symlink, we want the * path of the symlink not where it points to. */ name = zfs_basename(dir); if ((dl = zfs_dirnamelen(dir)) == -1) dpath = "."; else dpath = d = zutil_strndup(hdl, dir, dl); if (realpath(dpath, path) == NULL) { error = errno; if (error == ENOENT) { error = 0; goto out; } zutil_error_aux(hdl, "%s", strerror(error)); (void) zutil_error_fmt(hdl, LPC_BADPATH, dgettext(TEXT_DOMAIN, "cannot resolve path '%s'"), dir); goto out; } zpool_find_import_scan_add_slice(hdl, lock, cache, path, name, order); out: free(d); return (error); } /* * Scan a list of directories for zfs devices. */ static int zpool_find_import_scan(libpc_handle_t *hdl, pthread_mutex_t *lock, avl_tree_t **slice_cache, const char * const *dir, size_t dirs) { avl_tree_t *cache; rdsk_node_t *slice; void *cookie; int i, error; *slice_cache = NULL; cache = zutil_alloc(hdl, sizeof (avl_tree_t)); avl_create(cache, slice_cache_compare, sizeof (rdsk_node_t), offsetof(rdsk_node_t, rn_node)); for (i = 0; i < dirs; i++) { struct stat sbuf; if (stat(dir[i], &sbuf) != 0) { error = errno; if (error == ENOENT) continue; zutil_error_aux(hdl, "%s", strerror(error)); (void) zutil_error_fmt(hdl, LPC_BADPATH, dgettext( TEXT_DOMAIN, "cannot resolve path '%s'"), dir[i]); goto error; } /* * If dir[i] is a directory, we walk through it and add all * the entries to the cache. If it's not a directory, we just * add it to the cache. */ if (S_ISDIR(sbuf.st_mode)) { if ((error = zpool_find_import_scan_dir(hdl, lock, cache, dir[i], i)) != 0) goto error; } else { if ((error = zpool_find_import_scan_path(hdl, lock, cache, dir[i], i)) != 0) goto error; } } *slice_cache = cache; return (0); error: cookie = NULL; while ((slice = avl_destroy_nodes(cache, &cookie)) != NULL) { free(slice->rn_name); free(slice); } free(cache); return (error); } /* * Given a list of directories to search, find all pools stored on disk. This * includes partial pools which are not available to import. If no args are * given (argc is 0), then the default directory (/dev/dsk) is searched. * poolname or guid (but not both) are provided by the caller when trying * to import a specific pool. */ static nvlist_t * zpool_find_import_impl(libpc_handle_t *hdl, importargs_t *iarg, pthread_mutex_t *lock, avl_tree_t *cache) { (void) lock; nvlist_t *ret = NULL; pool_list_t pools = { 0 }; pool_entry_t *pe, *penext; vdev_entry_t *ve, *venext; config_entry_t *ce, *cenext; name_entry_t *ne, *nenext; rdsk_node_t *slice; void *cookie; tpool_t *t; verify(iarg->poolname == NULL || iarg->guid == 0); /* * Create a thread pool to parallelize the process of reading and * validating labels, a large number of threads can be used due to * minimal contention. */ t = tpool_create(1, 2 * sysconf(_SC_NPROCESSORS_ONLN), 0, NULL); for (slice = avl_first(cache); slice; (slice = avl_walk(cache, slice, AVL_AFTER))) (void) tpool_dispatch(t, zpool_open_func, slice); tpool_wait(t); tpool_destroy(t); /* * Process the cache, filtering out any entries which are not * for the specified pool then adding matching label configs. */ cookie = NULL; while ((slice = avl_destroy_nodes(cache, &cookie)) != NULL) { if (slice->rn_config != NULL) { nvlist_t *config = slice->rn_config; boolean_t matched = B_TRUE; boolean_t aux = B_FALSE; int fd; /* * Check if it's a spare or l2cache device. If it is, * we need to skip the name and guid check since they * don't exist on aux device label. */ if (iarg->poolname != NULL || iarg->guid != 0) { uint64_t state; aux = nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &state) == 0 && (state == POOL_STATE_SPARE || state == POOL_STATE_L2CACHE); } if (iarg->poolname != NULL && !aux) { const char *pname; matched = nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &pname) == 0 && strcmp(iarg->poolname, pname) == 0; } else if (iarg->guid != 0 && !aux) { uint64_t this_guid; matched = nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &this_guid) == 0 && iarg->guid == this_guid; } if (matched) { /* * Verify all remaining entries can be opened * exclusively. This will prune all underlying * multipath devices which otherwise could * result in the vdev appearing as UNAVAIL. * * Under zdb, this step isn't required and * would prevent a zdb -e of active pools with * no cachefile. */ fd = open(slice->rn_name, O_RDONLY | O_EXCL | O_CLOEXEC); if (fd >= 0 || iarg->can_be_active) { if (fd >= 0) close(fd); add_config(hdl, &pools, slice->rn_name, slice->rn_order, slice->rn_num_labels, config); } } nvlist_free(config); } free(slice->rn_name); free(slice); } avl_destroy(cache); free(cache); ret = get_configs(hdl, &pools, iarg->can_be_active, iarg->policy); for (pe = pools.pools; pe != NULL; pe = penext) { penext = pe->pe_next; for (ve = pe->pe_vdevs; ve != NULL; ve = venext) { venext = ve->ve_next; for (ce = ve->ve_configs; ce != NULL; ce = cenext) { cenext = ce->ce_next; nvlist_free(ce->ce_config); free(ce); } free(ve); } free(pe); } for (ne = pools.names; ne != NULL; ne = nenext) { nenext = ne->ne_next; free(ne->ne_name); free(ne); } return (ret); } /* * Given a config, discover the paths for the devices which * exist in the config. */ static int discover_cached_paths(libpc_handle_t *hdl, nvlist_t *nv, avl_tree_t *cache, pthread_mutex_t *lock) { const char *path = NULL; ssize_t dl; uint_t children; nvlist_t **child; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (int c = 0; c < children; c++) { discover_cached_paths(hdl, child[c], cache, lock); } } /* * Once we have the path, we need to add the directory to * our directory cache. */ if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0) { int ret; char c = '\0'; if ((dl = zfs_dirnamelen(path)) == -1) { path = "."; } else { c = path[dl]; ((char *)path)[dl] = '\0'; } ret = zpool_find_import_scan_dir(hdl, lock, cache, path, 0); if (c != '\0') ((char *)path)[dl] = c; return (ret); } return (0); } /* * Given a cache file, return the contents as a list of importable pools. * poolname or guid (but not both) are provided by the caller when trying * to import a specific pool. */ static nvlist_t * zpool_find_import_cached(libpc_handle_t *hdl, importargs_t *iarg) { char *buf; int fd; struct stat64 statbuf; nvlist_t *raw, *src, *dst; nvlist_t *pools; nvpair_t *elem; const char *name; uint64_t this_guid; boolean_t active; verify(iarg->poolname == NULL || iarg->guid == 0); if ((fd = open(iarg->cachefile, O_RDONLY | O_CLOEXEC)) < 0) { zutil_error_aux(hdl, "%s", strerror(errno)); (void) zutil_error(hdl, LPC_BADCACHE, dgettext(TEXT_DOMAIN, "failed to open cache file")); return (NULL); } if (fstat64(fd, &statbuf) != 0) { zutil_error_aux(hdl, "%s", strerror(errno)); (void) close(fd); (void) zutil_error(hdl, LPC_BADCACHE, dgettext(TEXT_DOMAIN, "failed to get size of cache file")); return (NULL); } if ((buf = zutil_alloc(hdl, statbuf.st_size)) == NULL) { (void) close(fd); return (NULL); } if (read(fd, buf, statbuf.st_size) != statbuf.st_size) { (void) close(fd); free(buf); (void) zutil_error(hdl, LPC_BADCACHE, dgettext(TEXT_DOMAIN, "failed to read cache file contents")); return (NULL); } (void) close(fd); if (nvlist_unpack(buf, statbuf.st_size, &raw, 0) != 0) { free(buf); (void) zutil_error(hdl, LPC_BADCACHE, dgettext(TEXT_DOMAIN, "invalid or corrupt cache file contents")); return (NULL); } free(buf); /* * Go through and get the current state of the pools and refresh their * state. */ if (nvlist_alloc(&pools, 0, 0) != 0) { (void) zutil_no_memory(hdl); nvlist_free(raw); return (NULL); } elem = NULL; while ((elem = nvlist_next_nvpair(raw, elem)) != NULL) { src = fnvpair_value_nvlist(elem); name = fnvlist_lookup_string(src, ZPOOL_CONFIG_POOL_NAME); if (iarg->poolname != NULL && strcmp(iarg->poolname, name) != 0) continue; this_guid = fnvlist_lookup_uint64(src, ZPOOL_CONFIG_POOL_GUID); if (iarg->guid != 0 && iarg->guid != this_guid) continue; if (zutil_pool_active(hdl, name, this_guid, &active) != 0) { nvlist_free(raw); nvlist_free(pools); return (NULL); } if (active) continue; if (iarg->scan) { uint64_t saved_guid = iarg->guid; const char *saved_poolname = iarg->poolname; pthread_mutex_t lock; /* * Create the device cache that will hold the * devices we will scan based on the cachefile. * This will get destroyed and freed by * zpool_find_import_impl. */ avl_tree_t *cache = zutil_alloc(hdl, sizeof (avl_tree_t)); avl_create(cache, slice_cache_compare, sizeof (rdsk_node_t), offsetof(rdsk_node_t, rn_node)); nvlist_t *nvroot = fnvlist_lookup_nvlist(src, ZPOOL_CONFIG_VDEV_TREE); /* * We only want to find the pool with this_guid. * We will reset these values back later. */ iarg->guid = this_guid; iarg->poolname = NULL; /* * We need to build up a cache of devices that exists * in the paths pointed to by the cachefile. This allows * us to preserve the device namespace that was * originally specified by the user but also lets us * scan devices in those directories in case they had * been renamed. */ pthread_mutex_init(&lock, NULL); discover_cached_paths(hdl, nvroot, cache, &lock); nvlist_t *nv = zpool_find_import_impl(hdl, iarg, &lock, cache); pthread_mutex_destroy(&lock); /* * zpool_find_import_impl will return back * a list of pools that it found based on the * device cache. There should only be one pool * since we're looking for a specific guid. * We will use that pool to build up the final * pool nvlist which is returned back to the * caller. */ nvpair_t *pair = nvlist_next_nvpair(nv, NULL); if (pair == NULL) continue; fnvlist_add_nvlist(pools, nvpair_name(pair), fnvpair_value_nvlist(pair)); VERIFY3P(nvlist_next_nvpair(nv, pair), ==, NULL); iarg->guid = saved_guid; iarg->poolname = saved_poolname; continue; } if (nvlist_add_string(src, ZPOOL_CONFIG_CACHEFILE, iarg->cachefile) != 0) { (void) zutil_no_memory(hdl); nvlist_free(raw); nvlist_free(pools); return (NULL); } update_vdevs_config_dev_sysfs_path(src); if ((dst = zutil_refresh_config(hdl, src)) == NULL) { nvlist_free(raw); nvlist_free(pools); return (NULL); } if (nvlist_add_nvlist(pools, nvpair_name(elem), dst) != 0) { (void) zutil_no_memory(hdl); nvlist_free(dst); nvlist_free(raw); nvlist_free(pools); return (NULL); } nvlist_free(dst); } nvlist_free(raw); return (pools); } static nvlist_t * zpool_find_import(libpc_handle_t *hdl, importargs_t *iarg) { pthread_mutex_t lock; avl_tree_t *cache; nvlist_t *pools = NULL; verify(iarg->poolname == NULL || iarg->guid == 0); pthread_mutex_init(&lock, NULL); /* * Locate pool member vdevs by blkid or by directory scanning. * On success a newly allocated AVL tree which is populated with an * entry for each discovered vdev will be returned in the cache. * It's the caller's responsibility to consume and destroy this tree. */ if (iarg->scan || iarg->paths != 0) { size_t dirs = iarg->paths; const char * const *dir = (const char * const *)iarg->path; if (dirs == 0) dir = zpool_default_search_paths(&dirs); if (zpool_find_import_scan(hdl, &lock, &cache, dir, dirs) != 0) { pthread_mutex_destroy(&lock); return (NULL); } } else { if (zpool_find_import_blkid(hdl, &lock, &cache) != 0) { pthread_mutex_destroy(&lock); return (NULL); } } pools = zpool_find_import_impl(hdl, iarg, &lock, cache); pthread_mutex_destroy(&lock); return (pools); } nvlist_t * zpool_search_import(libpc_handle_t *hdl, importargs_t *import) { nvlist_t *pools = NULL; verify(import->poolname == NULL || import->guid == 0); if (import->cachefile != NULL) pools = zpool_find_import_cached(hdl, import); else pools = zpool_find_import(hdl, import); if ((pools == NULL || nvlist_empty(pools)) && hdl->lpc_open_access_error && geteuid() != 0) { (void) zutil_error(hdl, LPC_EACCESS, dgettext(TEXT_DOMAIN, "no pools found")); } return (pools); } static boolean_t pool_match(nvlist_t *cfg, const char *tgt) { uint64_t v, guid = strtoull(tgt, NULL, 0); const char *s; if (guid != 0) { if (nvlist_lookup_uint64(cfg, ZPOOL_CONFIG_POOL_GUID, &v) == 0) return (v == guid); } else { if (nvlist_lookup_string(cfg, ZPOOL_CONFIG_POOL_NAME, &s) == 0) return (strcmp(s, tgt) == 0); } return (B_FALSE); } int zpool_find_config(libpc_handle_t *hdl, const char *target, nvlist_t **configp, importargs_t *args) { nvlist_t *pools; nvlist_t *match = NULL; nvlist_t *config = NULL; char *sepp = NULL; int count = 0; char *targetdup = strdup(target); if (targetdup == NULL) return (ENOMEM); *configp = NULL; if ((sepp = strpbrk(targetdup, "/@")) != NULL) *sepp = '\0'; pools = zpool_search_import(hdl, args); if (pools != NULL) { nvpair_t *elem = NULL; while ((elem = nvlist_next_nvpair(pools, elem)) != NULL) { VERIFY0(nvpair_value_nvlist(elem, &config)); if (pool_match(config, targetdup)) { count++; if (match != NULL) { /* multiple matches found */ continue; } else { match = fnvlist_dup(config); } } } fnvlist_free(pools); } if (count == 0) { free(targetdup); return (ENOENT); } if (count > 1) { free(targetdup); fnvlist_free(match); return (EINVAL); } *configp = match; free(targetdup); return (0); } /* Return if a vdev is a leaf vdev. Note: draid spares are leaf vdevs. */ static boolean_t vdev_is_leaf(nvlist_t *nv) { uint_t children = 0; nvlist_t **child; (void) nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children); return (children == 0); } /* Return if a vdev is a leaf vdev and a real device (disk or file) */ static boolean_t vdev_is_real_leaf(nvlist_t *nv) { const char *type = NULL; if (!vdev_is_leaf(nv)) return (B_FALSE); (void) nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type); if ((strcmp(type, VDEV_TYPE_DISK) == 0) || (strcmp(type, VDEV_TYPE_FILE) == 0)) { return (B_TRUE); } return (B_FALSE); } /* * This function is called by our FOR_EACH_VDEV() macros. * * state: State machine status (stored inside of a (nvlist_t *)) * nv: The current vdev nvlist_t we are iterating over. * last_nv: The previous vdev nvlist_t we returned to the user in * the last iteration of FOR_EACH_VDEV(). We use it * to find the next vdev nvlist_t we should return. * real_leaves_only: Only return leaf vdevs. * * Returns 1 if we found the next vdev nvlist_t for this iteration. 0 if * we're still searching for it. */ static int __for_each_vdev_macro_helper_func(void *state, nvlist_t *nv, void *last_nv, boolean_t real_leaves_only) { enum {FIRST_NV = 0, NEXT_IS_MATCH = 1, STOP_LOOKING = 2}; /* The very first entry in the NV list is a special case */ if (*((nvlist_t **)state) == (nvlist_t *)FIRST_NV) { if (real_leaves_only && !vdev_is_real_leaf(nv)) return (0); *((nvlist_t **)last_nv) = nv; *((nvlist_t **)state) = (nvlist_t *)STOP_LOOKING; return (1); } /* * We came across our last_nv, meaning the next one is the one we * want */ if (nv == *((nvlist_t **)last_nv)) { /* Next iteration of this function will return the nvlist_t */ *((nvlist_t **)state) = (nvlist_t *)NEXT_IS_MATCH; return (0); } /* * We marked NEXT_IS_MATCH on the previous iteration, so this is the one * we want. */ if (*(nvlist_t **)state == (nvlist_t *)NEXT_IS_MATCH) { if (real_leaves_only && !vdev_is_real_leaf(nv)) return (0); *((nvlist_t **)last_nv) = nv; *((nvlist_t **)state) = (nvlist_t *)STOP_LOOKING; return (1); } return (0); } int for_each_vdev_macro_helper_func(void *state, nvlist_t *nv, void *last_nv) { return (__for_each_vdev_macro_helper_func(state, nv, last_nv, B_FALSE)); } int for_each_real_leaf_vdev_macro_helper_func(void *state, nvlist_t *nv, void *last_nv) { return (__for_each_vdev_macro_helper_func(state, nv, last_nv, B_TRUE)); } /* * Internal function for iterating over the vdevs. * * For each vdev, func() will be called and will be passed 'zhp' (which is * typically the zpool_handle_t cast as a void pointer), the vdev's nvlist, and * a user-defined data pointer). * * The return values from all the func() calls will be OR'd together and * returned. */ int for_each_vdev_cb(void *zhp, nvlist_t *nv, pool_vdev_iter_f func, void *data) { nvlist_t **child; uint_t c, children; int ret = 0; int i; const char *type; const char *list[] = { ZPOOL_CONFIG_SPARES, ZPOOL_CONFIG_L2CACHE, ZPOOL_CONFIG_CHILDREN }; if (nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) != 0) return (ret); /* Don't run our function on indirect vdevs */ if (strcmp(type, VDEV_TYPE_INDIRECT) != 0) { ret |= func(zhp, nv, data); } for (i = 0; i < ARRAY_SIZE(list); i++) { if (nvlist_lookup_nvlist_array(nv, list[i], &child, &children) == 0) { for (c = 0; c < children; c++) { uint64_t ishole = 0; (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_HOLE, &ishole); if (ishole) continue; ret |= for_each_vdev_cb(zhp, child[c], func, data); } } } return (ret); } /* * Given an ZPOOL_CONFIG_VDEV_TREE nvpair, iterate over all the vdevs, calling * func() for each one. func() is passed the vdev's nvlist and an optional * user-defined 'data' pointer. */ int for_each_vdev_in_nvlist(nvlist_t *nvroot, pool_vdev_iter_f func, void *data) { return (for_each_vdev_cb(NULL, nvroot, func, data)); }