/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2013, 2018 by Delphix. All rights reserved. * Copyright (c) 2016, 2017 Intel Corporation. * Copyright 2016 Igor Kozhukhov . */ /* * Functions to convert between a list of vdevs and an nvlist representing the * configuration. Each entry in the list can be one of: * * Device vdevs * disk=(path=..., devid=...) * file=(path=...) * * Group vdevs * raidz[1|2]=(...) * mirror=(...) * * Hot spares * * While the underlying implementation supports it, group vdevs cannot contain * other group vdevs. All userland verification of devices is contained within * this file. If successful, the nvlist returned can be passed directly to the * kernel; we've done as much verification as possible in userland. * * Hot spares are a special case, and passed down as an array of disk vdevs, at * the same level as the root of the vdev tree. * * The only function exported by this file is 'make_root_vdev'. The * function performs several passes: * * 1. Construct the vdev specification. Performs syntax validation and * makes sure each device is valid. * 2. Check for devices in use. Using libblkid to make sure that no * devices are also in use. Some can be overridden using the 'force' * flag, others cannot. * 3. Check for replication errors if the 'force' flag is not specified. * validates that the replication level is consistent across the * entire pool. * 4. Call libzfs to label any whole disks with an EFI label. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "zpool_util.h" #include #include /* * For any given vdev specification, we can have multiple errors. The * vdev_error() function keeps track of whether we have seen an error yet, and * prints out a header if its the first error we've seen. */ boolean_t error_seen; boolean_t is_force; void vdev_error(const char *fmt, ...) { va_list ap; if (!error_seen) { (void) fprintf(stderr, gettext("invalid vdev specification\n")); if (!is_force) (void) fprintf(stderr, gettext("use '-f' to override " "the following errors:\n")); else (void) fprintf(stderr, gettext("the following errors " "must be manually repaired:\n")); error_seen = B_TRUE; } va_start(ap, fmt); (void) vfprintf(stderr, fmt, ap); va_end(ap); } /* * Check that a file is valid. All we can do in this case is check that it's * not in use by another pool, and not in use by swap. */ int check_file_generic(const char *file, boolean_t force, boolean_t isspare) { char *name; int fd; int ret = 0; pool_state_t state; boolean_t inuse; if ((fd = open(file, O_RDONLY)) < 0) return (0); if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) == 0 && inuse) { const char *desc; switch (state) { case POOL_STATE_ACTIVE: desc = gettext("active"); break; case POOL_STATE_EXPORTED: desc = gettext("exported"); break; case POOL_STATE_POTENTIALLY_ACTIVE: desc = gettext("potentially active"); break; default: desc = gettext("unknown"); break; } /* * Allow hot spares to be shared between pools. */ if (state == POOL_STATE_SPARE && isspare) { free(name); (void) close(fd); return (0); } if (state == POOL_STATE_ACTIVE || state == POOL_STATE_SPARE || !force) { switch (state) { case POOL_STATE_SPARE: vdev_error(gettext("%s is reserved as a hot " "spare for pool %s\n"), file, name); break; default: vdev_error(gettext("%s is part of %s pool " "'%s'\n"), file, desc, name); break; } ret = -1; } free(name); } (void) close(fd); return (ret); } /* * This may be a shorthand device path or it could be total gibberish. * Check to see if it is a known device available in zfs_vdev_paths. * As part of this check, see if we've been given an entire disk * (minus the slice number). */ static int is_shorthand_path(const char *arg, char *path, size_t path_size, struct stat64 *statbuf, boolean_t *wholedisk) { int error; error = zfs_resolve_shortname(arg, path, path_size); if (error == 0) { *wholedisk = zfs_dev_is_whole_disk(path); if (*wholedisk || (stat64(path, statbuf) == 0)) return (0); } strlcpy(path, arg, path_size); memset(statbuf, 0, sizeof (*statbuf)); *wholedisk = B_FALSE; return (error); } /* * Determine if the given path is a hot spare within the given configuration. * If no configuration is given we rely solely on the label. */ static boolean_t is_spare(nvlist_t *config, const char *path) { int fd; pool_state_t state; char *name = NULL; nvlist_t *label; uint64_t guid, spareguid; nvlist_t *nvroot; nvlist_t **spares; uint_t i, nspares; boolean_t inuse; if (zpool_is_draid_spare(path)) return (B_TRUE); if ((fd = open(path, O_RDONLY|O_DIRECT)) < 0) return (B_FALSE); if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) != 0 || !inuse || state != POOL_STATE_SPARE || zpool_read_label(fd, &label, NULL) != 0) { free(name); (void) close(fd); return (B_FALSE); } free(name); (void) close(fd); if (config == NULL) { nvlist_free(label); return (B_TRUE); } verify(nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &guid) == 0); nvlist_free(label); verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { for (i = 0; i < nspares; i++) { verify(nvlist_lookup_uint64(spares[i], ZPOOL_CONFIG_GUID, &spareguid) == 0); if (spareguid == guid) return (B_TRUE); } } return (B_FALSE); } /* * Create a leaf vdev. Determine if this is a file or a device. If it's a * device, fill in the device id to make a complete nvlist. Valid forms for a * leaf vdev are: * * /dev/xxx Complete disk path * /xxx Full path to file * xxx Shorthand for /xxx * draid* Virtual dRAID spare */ static nvlist_t * make_leaf_vdev(nvlist_t *props, const char *arg, boolean_t is_primary) { char path[MAXPATHLEN]; struct stat64 statbuf; nvlist_t *vdev = NULL; const char *type = NULL; boolean_t wholedisk = B_FALSE; uint64_t ashift = 0; int err; /* * Determine what type of vdev this is, and put the full path into * 'path'. We detect whether this is a device of file afterwards by * checking the st_mode of the file. */ if (arg[0] == '/') { /* * Complete device or file path. Exact type is determined by * examining the file descriptor afterwards. Symbolic links * are resolved to their real paths to determine whole disk * and S_ISBLK/S_ISREG type checks. However, we are careful * to store the given path as ZPOOL_CONFIG_PATH to ensure we * can leverage udev's persistent device labels. */ if (realpath(arg, path) == NULL) { (void) fprintf(stderr, gettext("cannot resolve path '%s'\n"), arg); return (NULL); } wholedisk = zfs_dev_is_whole_disk(path); if (!wholedisk && (stat64(path, &statbuf) != 0)) { (void) fprintf(stderr, gettext("cannot open '%s': %s\n"), path, strerror(errno)); return (NULL); } /* After whole disk check restore original passed path */ strlcpy(path, arg, sizeof (path)); } else if (zpool_is_draid_spare(arg)) { if (!is_primary) { (void) fprintf(stderr, gettext("cannot open '%s': dRAID spares can only " "be used to replace primary vdevs\n"), arg); return (NULL); } wholedisk = B_TRUE; strlcpy(path, arg, sizeof (path)); type = VDEV_TYPE_DRAID_SPARE; } else { err = is_shorthand_path(arg, path, sizeof (path), &statbuf, &wholedisk); if (err != 0) { /* * If we got ENOENT, then the user gave us * gibberish, so try to direct them with a * reasonable error message. Otherwise, * regurgitate strerror() since it's the best we * can do. */ if (err == ENOENT) { (void) fprintf(stderr, gettext("cannot open '%s': no such " "device in %s\n"), arg, DISK_ROOT); (void) fprintf(stderr, gettext("must be a full path or " "shorthand device name\n")); return (NULL); } else { (void) fprintf(stderr, gettext("cannot open '%s': %s\n"), path, strerror(errno)); return (NULL); } } } if (type == NULL) { /* * Determine whether this is a device or a file. */ if (wholedisk || S_ISBLK(statbuf.st_mode)) { type = VDEV_TYPE_DISK; } else if (S_ISREG(statbuf.st_mode)) { type = VDEV_TYPE_FILE; } else { fprintf(stderr, gettext("cannot use '%s': must " "be a block device or regular file\n"), path); return (NULL); } } /* * Finally, we have the complete device or file, and we know that it is * acceptable to use. Construct the nvlist to describe this vdev. All * vdevs have a 'path' element, and devices also have a 'devid' element. */ verify(nvlist_alloc(&vdev, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_string(vdev, ZPOOL_CONFIG_PATH, path) == 0); verify(nvlist_add_string(vdev, ZPOOL_CONFIG_TYPE, type) == 0); if (strcmp(type, VDEV_TYPE_DISK) == 0) verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_WHOLE_DISK, (uint64_t)wholedisk) == 0); /* * Override defaults if custom properties are provided. */ if (props != NULL) { const char *value = NULL; if (nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_ASHIFT), &value) == 0) { if (zfs_nicestrtonum(NULL, value, &ashift) != 0) { (void) fprintf(stderr, gettext("ashift must be a number.\n")); return (NULL); } if (ashift != 0 && (ashift < ASHIFT_MIN || ashift > ASHIFT_MAX)) { (void) fprintf(stderr, gettext("invalid 'ashift=%" PRIu64 "' " "property: only values between %" PRId32 " " "and %" PRId32 " are allowed.\n"), ashift, ASHIFT_MIN, ASHIFT_MAX); return (NULL); } } } /* * If the device is known to incorrectly report its physical sector * size explicitly provide the known correct value. */ if (ashift == 0) { int sector_size; if (check_sector_size_database(path, §or_size) == B_TRUE) ashift = highbit64(sector_size) - 1; } if (ashift > 0) (void) nvlist_add_uint64(vdev, ZPOOL_CONFIG_ASHIFT, ashift); return (vdev); } /* * Go through and verify the replication level of the pool is consistent. * Performs the following checks: * * For the new spec, verifies that devices in mirrors and raidz are the * same size. * * If the current configuration already has inconsistent replication * levels, ignore any other potential problems in the new spec. * * Otherwise, make sure that the current spec (if there is one) and the new * spec have consistent replication levels. * * If there is no current spec (create), make sure new spec has at least * one general purpose vdev. */ typedef struct replication_level { const char *zprl_type; uint64_t zprl_children; uint64_t zprl_parity; } replication_level_t; #define ZPOOL_FUZZ (16 * 1024 * 1024) /* * N.B. For the purposes of comparing replication levels dRAID can be * considered functionally equivalent to raidz. */ static boolean_t is_raidz_mirror(replication_level_t *a, replication_level_t *b, replication_level_t **raidz, replication_level_t **mirror) { if ((strcmp(a->zprl_type, "raidz") == 0 || strcmp(a->zprl_type, "draid") == 0) && strcmp(b->zprl_type, "mirror") == 0) { *raidz = a; *mirror = b; return (B_TRUE); } return (B_FALSE); } /* * Comparison for determining if dRAID and raidz where passed in either order. */ static boolean_t is_raidz_draid(replication_level_t *a, replication_level_t *b) { if ((strcmp(a->zprl_type, "raidz") == 0 || strcmp(a->zprl_type, "draid") == 0) && (strcmp(b->zprl_type, "raidz") == 0 || strcmp(b->zprl_type, "draid") == 0)) { return (B_TRUE); } return (B_FALSE); } /* * Given a list of toplevel vdevs, return the current replication level. If * the config is inconsistent, then NULL is returned. If 'fatal' is set, then * an error message will be displayed for each self-inconsistent vdev. */ static replication_level_t * get_replication(nvlist_t *nvroot, boolean_t fatal) { nvlist_t **top; uint_t t, toplevels; nvlist_t **child; uint_t c, children; nvlist_t *nv; const char *type; replication_level_t lastrep = {0}; replication_level_t rep; replication_level_t *ret; replication_level_t *raidz, *mirror; boolean_t dontreport; ret = safe_malloc(sizeof (replication_level_t)); verify(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &top, &toplevels) == 0); for (t = 0; t < toplevels; t++) { uint64_t is_log = B_FALSE; nv = top[t]; /* * For separate logs we ignore the top level vdev replication * constraints. */ (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_LOG, &is_log); if (is_log) continue; /* * Ignore holes introduced by removing aux devices, along * with indirect vdevs introduced by previously removed * vdevs. */ verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); if (strcmp(type, VDEV_TYPE_HOLE) == 0 || strcmp(type, VDEV_TYPE_INDIRECT) == 0) continue; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { /* * This is a 'file' or 'disk' vdev. */ rep.zprl_type = type; rep.zprl_children = 1; rep.zprl_parity = 0; } else { int64_t vdev_size; /* * This is a mirror or RAID-Z vdev. Go through and make * sure the contents are all the same (files vs. disks), * keeping track of the number of elements in the * process. * * We also check that the size of each vdev (if it can * be determined) is the same. */ rep.zprl_type = type; rep.zprl_children = 0; if (strcmp(type, VDEV_TYPE_RAIDZ) == 0 || strcmp(type, VDEV_TYPE_DRAID) == 0) { verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY, &rep.zprl_parity) == 0); assert(rep.zprl_parity != 0); } else { rep.zprl_parity = 0; } /* * The 'dontreport' variable indicates that we've * already reported an error for this spec, so don't * bother doing it again. */ type = NULL; dontreport = 0; vdev_size = -1LL; for (c = 0; c < children; c++) { nvlist_t *cnv = child[c]; const char *path; struct stat64 statbuf; int64_t size = -1LL; const char *childtype; int fd, err; rep.zprl_children++; verify(nvlist_lookup_string(cnv, ZPOOL_CONFIG_TYPE, &childtype) == 0); /* * If this is a replacing or spare vdev, then * get the real first child of the vdev: do this * in a loop because replacing and spare vdevs * can be nested. */ while (strcmp(childtype, VDEV_TYPE_REPLACING) == 0 || strcmp(childtype, VDEV_TYPE_SPARE) == 0) { nvlist_t **rchild; uint_t rchildren; verify(nvlist_lookup_nvlist_array(cnv, ZPOOL_CONFIG_CHILDREN, &rchild, &rchildren) == 0); assert(rchildren == 2); cnv = rchild[0]; verify(nvlist_lookup_string(cnv, ZPOOL_CONFIG_TYPE, &childtype) == 0); } verify(nvlist_lookup_string(cnv, ZPOOL_CONFIG_PATH, &path) == 0); /* * If we have a raidz/mirror that combines disks * with files, report it as an error. */ if (!dontreport && type != NULL && strcmp(type, childtype) != 0) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication " "level: %s contains both " "files and devices\n"), rep.zprl_type); else return (NULL); dontreport = B_TRUE; } /* * According to stat(2), the value of 'st_size' * is undefined for block devices and character * devices. But there is no effective way to * determine the real size in userland. * * Instead, we'll take advantage of an * implementation detail of spec_size(). If the * device is currently open, then we (should) * return a valid size. * * If we still don't get a valid size (indicated * by a size of 0 or MAXOFFSET_T), then ignore * this device altogether. */ if ((fd = open(path, O_RDONLY)) >= 0) { err = fstat64_blk(fd, &statbuf); (void) close(fd); } else { err = stat64(path, &statbuf); } if (err != 0 || statbuf.st_size == 0 || statbuf.st_size == MAXOFFSET_T) continue; size = statbuf.st_size; /* * Also make sure that devices and * slices have a consistent size. If * they differ by a significant amount * (~16MB) then report an error. */ if (!dontreport && (vdev_size != -1LL && (llabs(size - vdev_size) > ZPOOL_FUZZ))) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "%s contains devices of " "different sizes\n"), rep.zprl_type); else return (NULL); dontreport = B_TRUE; } type = childtype; vdev_size = size; } } /* * At this point, we have the replication of the last toplevel * vdev in 'rep'. Compare it to 'lastrep' to see if it is * different. */ if (lastrep.zprl_type != NULL) { if (is_raidz_mirror(&lastrep, &rep, &raidz, &mirror) || is_raidz_mirror(&rep, &lastrep, &raidz, &mirror)) { /* * Accepted raidz and mirror when they can * handle the same number of disk failures. */ if (raidz->zprl_parity != mirror->zprl_children - 1) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication " "level: " "%s and %s vdevs with " "different redundancy, " "%llu vs. %llu (%llu-way) " "are present\n"), raidz->zprl_type, mirror->zprl_type, (u_longlong_t) raidz->zprl_parity, (u_longlong_t) mirror->zprl_children - 1, (u_longlong_t) mirror->zprl_children); else return (NULL); } } else if (is_raidz_draid(&lastrep, &rep)) { /* * Accepted raidz and draid when they can * handle the same number of disk failures. */ if (lastrep.zprl_parity != rep.zprl_parity) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication " "level: %s and %s vdevs " "with different " "redundancy, %llu vs. " "%llu are present\n"), lastrep.zprl_type, rep.zprl_type, (u_longlong_t) lastrep.zprl_parity, (u_longlong_t) rep.zprl_parity); else return (NULL); } } else if (strcmp(lastrep.zprl_type, rep.zprl_type) != 0) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication level: " "both %s and %s vdevs are " "present\n"), lastrep.zprl_type, rep.zprl_type); else return (NULL); } else if (lastrep.zprl_parity != rep.zprl_parity) { if (ret) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication level: " "both %llu and %llu device parity " "%s vdevs are present\n"), (u_longlong_t) lastrep.zprl_parity, (u_longlong_t)rep.zprl_parity, rep.zprl_type); else return (NULL); } else if (lastrep.zprl_children != rep.zprl_children) { if (ret) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication level: " "both %llu-way and %llu-way %s " "vdevs are present\n"), (u_longlong_t) lastrep.zprl_children, (u_longlong_t) rep.zprl_children, rep.zprl_type); else return (NULL); } } lastrep = rep; } if (ret != NULL) *ret = rep; return (ret); } /* * Check the replication level of the vdev spec against the current pool. Calls * get_replication() to make sure the new spec is self-consistent. If the pool * has a consistent replication level, then we ignore any errors. Otherwise, * report any difference between the two. */ static int check_replication(nvlist_t *config, nvlist_t *newroot) { nvlist_t **child; uint_t children; replication_level_t *current = NULL, *new; replication_level_t *raidz, *mirror; int ret; /* * If we have a current pool configuration, check to see if it's * self-consistent. If not, simply return success. */ if (config != NULL) { nvlist_t *nvroot; verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if ((current = get_replication(nvroot, B_FALSE)) == NULL) return (0); } /* * for spares there may be no children, and therefore no * replication level to check */ if ((nvlist_lookup_nvlist_array(newroot, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) || (children == 0)) { free(current); return (0); } /* * If all we have is logs then there's no replication level to check. */ if (num_logs(newroot) == children) { free(current); return (0); } /* * Get the replication level of the new vdev spec, reporting any * inconsistencies found. */ if ((new = get_replication(newroot, B_TRUE)) == NULL) { free(current); return (-1); } /* * Check to see if the new vdev spec matches the replication level of * the current pool. */ ret = 0; if (current != NULL) { if (is_raidz_mirror(current, new, &raidz, &mirror) || is_raidz_mirror(new, current, &raidz, &mirror)) { if (raidz->zprl_parity != mirror->zprl_children - 1) { vdev_error(gettext( "mismatched replication level: pool and " "new vdev with different redundancy, %s " "and %s vdevs, %llu vs. %llu (%llu-way)\n"), raidz->zprl_type, mirror->zprl_type, (u_longlong_t)raidz->zprl_parity, (u_longlong_t)mirror->zprl_children - 1, (u_longlong_t)mirror->zprl_children); ret = -1; } } else if (strcmp(current->zprl_type, new->zprl_type) != 0) { vdev_error(gettext( "mismatched replication level: pool uses %s " "and new vdev is %s\n"), current->zprl_type, new->zprl_type); ret = -1; } else if (current->zprl_parity != new->zprl_parity) { vdev_error(gettext( "mismatched replication level: pool uses %llu " "device parity and new vdev uses %llu\n"), (u_longlong_t)current->zprl_parity, (u_longlong_t)new->zprl_parity); ret = -1; } else if (current->zprl_children != new->zprl_children) { vdev_error(gettext( "mismatched replication level: pool uses %llu-way " "%s and new vdev uses %llu-way %s\n"), (u_longlong_t)current->zprl_children, current->zprl_type, (u_longlong_t)new->zprl_children, new->zprl_type); ret = -1; } } free(new); if (current != NULL) free(current); return (ret); } static int zero_label(const char *path) { const int size = 4096; char buf[size]; int err, fd; if ((fd = open(path, O_WRONLY|O_EXCL)) < 0) { (void) fprintf(stderr, gettext("cannot open '%s': %s\n"), path, strerror(errno)); return (-1); } memset(buf, 0, size); err = write(fd, buf, size); (void) fdatasync(fd); (void) close(fd); if (err == -1) { (void) fprintf(stderr, gettext("cannot zero first %d bytes " "of '%s': %s\n"), size, path, strerror(errno)); return (-1); } if (err != size) { (void) fprintf(stderr, gettext("could only zero %d/%d bytes " "of '%s'\n"), err, size, path); return (-1); } return (0); } /* * Go through and find any whole disks in the vdev specification, labelling them * as appropriate. When constructing the vdev spec, we were unable to open this * device in order to provide a devid. Now that we have labelled the disk and * know that slice 0 is valid, we can construct the devid now. * * If the disk was already labeled with an EFI label, we will have gotten the * devid already (because we were able to open the whole disk). Otherwise, we * need to get the devid after we label the disk. */ static int make_disks(zpool_handle_t *zhp, nvlist_t *nv) { nvlist_t **child; uint_t c, children; const char *type, *path; char devpath[MAXPATHLEN]; char udevpath[MAXPATHLEN]; uint64_t wholedisk; struct stat64 statbuf; int is_exclusive = 0; int fd; int ret; verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { if (strcmp(type, VDEV_TYPE_DISK) != 0) return (0); /* * We have a disk device. If this is a whole disk write * out the efi partition table, otherwise write zero's to * the first 4k of the partition. This is to ensure that * libblkid will not misidentify the partition due to a * magic value left by the previous filesystem. */ verify(!nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path)); verify(!nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk)); if (!wholedisk) { /* * Update device id string for mpath nodes (Linux only) */ if (is_mpath_whole_disk(path)) update_vdev_config_dev_strs(nv); if (!is_spare(NULL, path)) (void) zero_label(path); return (0); } if (realpath(path, devpath) == NULL) { ret = errno; (void) fprintf(stderr, gettext("cannot resolve path '%s'\n"), path); return (ret); } /* * Remove any previously existing symlink from a udev path to * the device before labeling the disk. This ensures that * only newly created links are used. Otherwise there is a * window between when udev deletes and recreates the link * during which access attempts will fail with ENOENT. */ strlcpy(udevpath, path, MAXPATHLEN); (void) zfs_append_partition(udevpath, MAXPATHLEN); fd = open(devpath, O_RDWR|O_EXCL); if (fd == -1) { if (errno == EBUSY) is_exclusive = 1; #ifdef __FreeBSD__ if (errno == EPERM) is_exclusive = 1; #endif } else { (void) close(fd); } /* * If the partition exists, contains a valid spare label, * and is opened exclusively there is no need to partition * it. Hot spares have already been partitioned and are * held open exclusively by the kernel as a safety measure. * * If the provided path is for a /dev/disk/ device its * symbolic link will be removed, partition table created, * and then block until udev creates the new link. */ if (!is_exclusive && !is_spare(NULL, udevpath)) { char *devnode = strrchr(devpath, '/') + 1; ret = strncmp(udevpath, UDISK_ROOT, strlen(UDISK_ROOT)); if (ret == 0) { ret = lstat64(udevpath, &statbuf); if (ret == 0 && S_ISLNK(statbuf.st_mode)) (void) unlink(udevpath); } /* * When labeling a pool the raw device node name * is provided as it appears under /dev/. */ if (zpool_label_disk(g_zfs, zhp, devnode) == -1) return (-1); /* * Wait for udev to signal the device is available * by the provided path. */ ret = zpool_label_disk_wait(udevpath, DISK_LABEL_WAIT); if (ret) { (void) fprintf(stderr, gettext("missing link: %s was " "partitioned but %s is missing\n"), devnode, udevpath); return (ret); } ret = zero_label(udevpath); if (ret) return (ret); } /* * Update the path to refer to the partition. The presence of * the 'whole_disk' field indicates to the CLI that we should * chop off the partition number when displaying the device in * future output. */ verify(nvlist_add_string(nv, ZPOOL_CONFIG_PATH, udevpath) == 0); /* * Update device id strings for whole disks (Linux only) */ update_vdev_config_dev_strs(nv); return (0); } for (c = 0; c < children; c++) if ((ret = make_disks(zhp, child[c])) != 0) return (ret); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) for (c = 0; c < children; c++) if ((ret = make_disks(zhp, child[c])) != 0) return (ret); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) for (c = 0; c < children; c++) if ((ret = make_disks(zhp, child[c])) != 0) return (ret); return (0); } /* * Go through and find any devices that are in use. We rely on libdiskmgt for * the majority of this task. */ static boolean_t is_device_in_use(nvlist_t *config, nvlist_t *nv, boolean_t force, boolean_t replacing, boolean_t isspare) { nvlist_t **child; uint_t c, children; const char *type, *path; int ret = 0; char buf[MAXPATHLEN]; uint64_t wholedisk = B_FALSE; boolean_t anyinuse = B_FALSE; verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { verify(!nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path)); if (strcmp(type, VDEV_TYPE_DISK) == 0) verify(!nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk)); /* * As a generic check, we look to see if this is a replace of a * hot spare within the same pool. If so, we allow it * regardless of what libblkid or zpool_in_use() says. */ if (replacing) { (void) strlcpy(buf, path, sizeof (buf)); if (wholedisk) { ret = zfs_append_partition(buf, sizeof (buf)); if (ret == -1) return (-1); } if (is_spare(config, buf)) return (B_FALSE); } if (strcmp(type, VDEV_TYPE_DISK) == 0) ret = check_device(path, force, isspare, wholedisk); else if (strcmp(type, VDEV_TYPE_FILE) == 0) ret = check_file(path, force, isspare); return (ret != 0); } for (c = 0; c < children; c++) if (is_device_in_use(config, child[c], force, replacing, B_FALSE)) anyinuse = B_TRUE; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) for (c = 0; c < children; c++) if (is_device_in_use(config, child[c], force, replacing, B_TRUE)) anyinuse = B_TRUE; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) for (c = 0; c < children; c++) if (is_device_in_use(config, child[c], force, replacing, B_FALSE)) anyinuse = B_TRUE; return (anyinuse); } /* * Returns the parity level extracted from a raidz or draid type. * If the parity cannot be determined zero is returned. */ static int get_parity(const char *type) { long parity = 0; const char *p; if (strncmp(type, VDEV_TYPE_RAIDZ, strlen(VDEV_TYPE_RAIDZ)) == 0) { p = type + strlen(VDEV_TYPE_RAIDZ); if (*p == '\0') { /* when unspecified default to single parity */ return (1); } else if (*p == '0') { /* no zero prefixes allowed */ return (0); } else { /* 0-3, no suffixes allowed */ char *end; errno = 0; parity = strtol(p, &end, 10); if (errno != 0 || *end != '\0' || parity < 1 || parity > VDEV_RAIDZ_MAXPARITY) { return (0); } } } else if (strncmp(type, VDEV_TYPE_DRAID, strlen(VDEV_TYPE_DRAID)) == 0) { p = type + strlen(VDEV_TYPE_DRAID); if (*p == '\0' || *p == ':') { /* when unspecified default to single parity */ return (1); } else if (*p == '0') { /* no zero prefixes allowed */ return (0); } else { /* 0-3, allowed suffixes: '\0' or ':' */ char *end; errno = 0; parity = strtol(p, &end, 10); if (errno != 0 || parity < 1 || parity > VDEV_DRAID_MAXPARITY || (*end != '\0' && *end != ':')) { return (0); } } } return ((int)parity); } /* * Assign the minimum and maximum number of devices allowed for * the specified type. On error NULL is returned, otherwise the * type prefix is returned (raidz, mirror, etc). */ static const char * is_grouping(const char *type, int *mindev, int *maxdev) { int nparity; if (strncmp(type, VDEV_TYPE_RAIDZ, strlen(VDEV_TYPE_RAIDZ)) == 0 || strncmp(type, VDEV_TYPE_DRAID, strlen(VDEV_TYPE_DRAID)) == 0) { nparity = get_parity(type); if (nparity == 0) return (NULL); if (mindev != NULL) *mindev = nparity + 1; if (maxdev != NULL) *maxdev = 255; if (strncmp(type, VDEV_TYPE_RAIDZ, strlen(VDEV_TYPE_RAIDZ)) == 0) { return (VDEV_TYPE_RAIDZ); } else { return (VDEV_TYPE_DRAID); } } if (maxdev != NULL) *maxdev = INT_MAX; if (strcmp(type, "mirror") == 0) { if (mindev != NULL) *mindev = 2; return (VDEV_TYPE_MIRROR); } if (strcmp(type, "spare") == 0) { if (mindev != NULL) *mindev = 1; return (VDEV_TYPE_SPARE); } if (strcmp(type, "log") == 0) { if (mindev != NULL) *mindev = 1; return (VDEV_TYPE_LOG); } if (strcmp(type, VDEV_ALLOC_BIAS_SPECIAL) == 0 || strcmp(type, VDEV_ALLOC_BIAS_DEDUP) == 0) { if (mindev != NULL) *mindev = 1; return (type); } if (strcmp(type, "cache") == 0) { if (mindev != NULL) *mindev = 1; return (VDEV_TYPE_L2CACHE); } return (NULL); } /* * Extract the configuration parameters encoded in the dRAID type and * use them to generate a dRAID configuration. The expected format is: * * draid[][:][:][:] * * The intent is to be able to generate a good configuration when no * additional information is provided. The only mandatory component * of the 'type' is the 'draid' prefix. If a value is not provided * then reasonable defaults are used. The optional components may * appear in any order but the d/s/c suffix is required. * * Valid inputs: * - data: number of data devices per group (1-255) * - parity: number of parity blocks per group (1-3) * - spares: number of distributed spare (0-100) * - children: total number of devices (1-255) * * Examples: * - zpool create tank draid * - zpool create tank draid2:8d:51c:2s */ static int draid_config_by_type(nvlist_t *nv, const char *type, uint64_t children) { uint64_t nparity = 1; uint64_t nspares = 0; uint64_t ndata = UINT64_MAX; uint64_t ngroups = 1; long value; if (strncmp(type, VDEV_TYPE_DRAID, strlen(VDEV_TYPE_DRAID)) != 0) return (EINVAL); nparity = (uint64_t)get_parity(type); if (nparity == 0 || nparity > VDEV_DRAID_MAXPARITY) { fprintf(stderr, gettext("invalid dRAID parity level %llu; must be " "between 1 and %d\n"), (u_longlong_t)nparity, VDEV_DRAID_MAXPARITY); return (EINVAL); } char *p = (char *)type; while ((p = strchr(p, ':')) != NULL) { char *end; p = p + 1; errno = 0; if (!isdigit(p[0])) { (void) fprintf(stderr, gettext("invalid dRAID " "syntax; expected [:] not '%s'\n"), type); return (EINVAL); } /* Expected non-zero value with c/d/s suffix */ value = strtol(p, &end, 10); char suffix = tolower(*end); if (errno != 0 || (suffix != 'c' && suffix != 'd' && suffix != 's')) { (void) fprintf(stderr, gettext("invalid dRAID " "syntax; expected [:] not '%s'\n"), type); return (EINVAL); } if (suffix == 'c') { if ((uint64_t)value != children) { fprintf(stderr, gettext("invalid number of dRAID children; " "%llu required but %llu provided\n"), (u_longlong_t)value, (u_longlong_t)children); return (EINVAL); } } else if (suffix == 'd') { ndata = (uint64_t)value; } else if (suffix == 's') { nspares = (uint64_t)value; } else { verify(0); /* Unreachable */ } } /* * When a specific number of data disks is not provided limit a * redundancy group to 8 data disks. This value was selected to * provide a reasonable tradeoff between capacity and performance. */ if (ndata == UINT64_MAX) { if (children > nspares + nparity) { ndata = MIN(children - nspares - nparity, 8); } else { fprintf(stderr, gettext("request number of " "distributed spares %llu and parity level %llu\n" "leaves no disks available for data\n"), (u_longlong_t)nspares, (u_longlong_t)nparity); return (EINVAL); } } /* Verify the maximum allowed group size is never exceeded. */ if (ndata == 0 || (ndata + nparity > children - nspares)) { fprintf(stderr, gettext("requested number of dRAID data " "disks per group %llu is too high,\nat most %llu disks " "are available for data\n"), (u_longlong_t)ndata, (u_longlong_t)(children - nspares - nparity)); return (EINVAL); } /* * Verify the requested number of spares can be satisfied. * An arbitrary limit of 100 distributed spares is applied. */ if (nspares > 100 || nspares > (children - (ndata + nparity))) { fprintf(stderr, gettext("invalid number of dRAID spares %llu; additional " "disks would be required\n"), (u_longlong_t)nspares); return (EINVAL); } /* Verify the requested number children is sufficient. */ if (children < (ndata + nparity + nspares)) { fprintf(stderr, gettext("%llu disks were provided, but at " "least %llu disks are required for this config\n"), (u_longlong_t)children, (u_longlong_t)(ndata + nparity + nspares)); } if (children > VDEV_DRAID_MAX_CHILDREN) { fprintf(stderr, gettext("%llu disks were provided, but " "dRAID only supports up to %u disks"), (u_longlong_t)children, VDEV_DRAID_MAX_CHILDREN); } /* * Calculate the minimum number of groups required to fill a slice. * This is the LCM of the stripe width (ndata + nparity) and the * number of data drives (children - nspares). */ while (ngroups * (ndata + nparity) % (children - nspares) != 0) ngroups++; /* Store the basic dRAID configuration. */ fnvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY, nparity); fnvlist_add_uint64(nv, ZPOOL_CONFIG_DRAID_NDATA, ndata); fnvlist_add_uint64(nv, ZPOOL_CONFIG_DRAID_NSPARES, nspares); fnvlist_add_uint64(nv, ZPOOL_CONFIG_DRAID_NGROUPS, ngroups); return (0); } /* * Construct a syntactically valid vdev specification, * and ensure that all devices and files exist and can be opened. * Note: we don't bother freeing anything in the error paths * because the program is just going to exit anyway. */ static nvlist_t * construct_spec(nvlist_t *props, int argc, char **argv) { nvlist_t *nvroot, *nv, **top, **spares, **l2cache; int t, toplevels, mindev, maxdev, nspares, nlogs, nl2cache; const char *type, *fulltype; boolean_t is_log, is_special, is_dedup, is_spare; boolean_t seen_logs; top = NULL; toplevels = 0; spares = NULL; l2cache = NULL; nspares = 0; nlogs = 0; nl2cache = 0; is_log = is_special = is_dedup = is_spare = B_FALSE; seen_logs = B_FALSE; nvroot = NULL; while (argc > 0) { fulltype = argv[0]; nv = NULL; /* * If it's a mirror, raidz, or draid the subsequent arguments * are its leaves -- until we encounter the next mirror, * raidz or draid. */ if ((type = is_grouping(fulltype, &mindev, &maxdev)) != NULL) { nvlist_t **child = NULL; int c, children = 0; if (strcmp(type, VDEV_TYPE_SPARE) == 0) { if (spares != NULL) { (void) fprintf(stderr, gettext("invalid vdev " "specification: 'spare' can be " "specified only once\n")); goto spec_out; } is_spare = B_TRUE; is_log = is_special = is_dedup = B_FALSE; } if (strcmp(type, VDEV_TYPE_LOG) == 0) { if (seen_logs) { (void) fprintf(stderr, gettext("invalid vdev " "specification: 'log' can be " "specified only once\n")); goto spec_out; } seen_logs = B_TRUE; is_log = B_TRUE; is_special = is_dedup = is_spare = B_FALSE; argc--; argv++; /* * A log is not a real grouping device. * We just set is_log and continue. */ continue; } if (strcmp(type, VDEV_ALLOC_BIAS_SPECIAL) == 0) { is_special = B_TRUE; is_log = is_dedup = is_spare = B_FALSE; argc--; argv++; continue; } if (strcmp(type, VDEV_ALLOC_BIAS_DEDUP) == 0) { is_dedup = B_TRUE; is_log = is_special = is_spare = B_FALSE; argc--; argv++; continue; } if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) { if (l2cache != NULL) { (void) fprintf(stderr, gettext("invalid vdev " "specification: 'cache' can be " "specified only once\n")); goto spec_out; } is_log = is_special = B_FALSE; is_dedup = is_spare = B_FALSE; } if (is_log || is_special || is_dedup) { if (strcmp(type, VDEV_TYPE_MIRROR) != 0) { (void) fprintf(stderr, gettext("invalid vdev " "specification: unsupported '%s' " "device: %s\n"), is_log ? "log" : "special", type); goto spec_out; } nlogs++; } for (c = 1; c < argc; c++) { if (is_grouping(argv[c], NULL, NULL) != NULL) break; children++; child = realloc(child, children * sizeof (nvlist_t *)); if (child == NULL) zpool_no_memory(); if ((nv = make_leaf_vdev(props, argv[c], !(is_log || is_special || is_dedup || is_spare))) == NULL) { for (c = 0; c < children - 1; c++) nvlist_free(child[c]); free(child); goto spec_out; } child[children - 1] = nv; } if (children < mindev) { (void) fprintf(stderr, gettext("invalid vdev " "specification: %s requires at least %d " "devices\n"), argv[0], mindev); for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); goto spec_out; } if (children > maxdev) { (void) fprintf(stderr, gettext("invalid vdev " "specification: %s supports no more than " "%d devices\n"), argv[0], maxdev); for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); goto spec_out; } argc -= c; argv += c; if (strcmp(type, VDEV_TYPE_SPARE) == 0) { spares = child; nspares = children; continue; } else if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) { l2cache = child; nl2cache = children; continue; } else { /* create a top-level vdev with children */ verify(nvlist_alloc(&nv, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_string(nv, ZPOOL_CONFIG_TYPE, type) == 0); verify(nvlist_add_uint64(nv, ZPOOL_CONFIG_IS_LOG, is_log) == 0); if (is_log) { verify(nvlist_add_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_LOG) == 0); } if (is_special) { verify(nvlist_add_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_SPECIAL) == 0); } if (is_dedup) { verify(nvlist_add_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_DEDUP) == 0); } if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { verify(nvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY, mindev - 1) == 0); } if (strcmp(type, VDEV_TYPE_DRAID) == 0) { if (draid_config_by_type(nv, fulltype, children) != 0) { for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); goto spec_out; } } verify(nvlist_add_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)child, children) == 0); for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); } } else { /* * We have a device. Pass off to make_leaf_vdev() to * construct the appropriate nvlist describing the vdev. */ if ((nv = make_leaf_vdev(props, argv[0], !(is_log || is_special || is_dedup || is_spare))) == NULL) goto spec_out; verify(nvlist_add_uint64(nv, ZPOOL_CONFIG_IS_LOG, is_log) == 0); if (is_log) { verify(nvlist_add_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_LOG) == 0); nlogs++; } if (is_special) { verify(nvlist_add_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_SPECIAL) == 0); } if (is_dedup) { verify(nvlist_add_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS, VDEV_ALLOC_BIAS_DEDUP) == 0); } argc--; argv++; } toplevels++; top = realloc(top, toplevels * sizeof (nvlist_t *)); if (top == NULL) zpool_no_memory(); top[toplevels - 1] = nv; } if (toplevels == 0 && nspares == 0 && nl2cache == 0) { (void) fprintf(stderr, gettext("invalid vdev " "specification: at least one toplevel vdev must be " "specified\n")); goto spec_out; } if (seen_logs && nlogs == 0) { (void) fprintf(stderr, gettext("invalid vdev specification: " "log requires at least 1 device\n")); goto spec_out; } /* * Finally, create nvroot and add all top-level vdevs to it. */ verify(nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) == 0); verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)top, toplevels) == 0); if (nspares != 0) verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, (const nvlist_t **)spares, nspares) == 0); if (nl2cache != 0) verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, (const nvlist_t **)l2cache, nl2cache) == 0); spec_out: for (t = 0; t < toplevels; t++) nvlist_free(top[t]); for (t = 0; t < nspares; t++) nvlist_free(spares[t]); for (t = 0; t < nl2cache; t++) nvlist_free(l2cache[t]); free(spares); free(l2cache); free(top); return (nvroot); } nvlist_t * split_mirror_vdev(zpool_handle_t *zhp, char *newname, nvlist_t *props, splitflags_t flags, int argc, char **argv) { nvlist_t *newroot = NULL, **child; uint_t c, children; if (argc > 0) { if ((newroot = construct_spec(props, argc, argv)) == NULL) { (void) fprintf(stderr, gettext("Unable to build a " "pool from the specified devices\n")); return (NULL); } if (!flags.dryrun && make_disks(zhp, newroot) != 0) { nvlist_free(newroot); return (NULL); } /* avoid any tricks in the spec */ verify(nvlist_lookup_nvlist_array(newroot, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0); for (c = 0; c < children; c++) { const char *path; const char *type; int min, max; verify(nvlist_lookup_string(child[c], ZPOOL_CONFIG_PATH, &path) == 0); if ((type = is_grouping(path, &min, &max)) != NULL) { (void) fprintf(stderr, gettext("Cannot use " "'%s' as a device for splitting\n"), type); nvlist_free(newroot); return (NULL); } } } if (zpool_vdev_split(zhp, newname, &newroot, props, flags) != 0) { nvlist_free(newroot); return (NULL); } return (newroot); } static int num_normal_vdevs(nvlist_t *nvroot) { nvlist_t **top; uint_t t, toplevels, normal = 0; verify(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &top, &toplevels) == 0); for (t = 0; t < toplevels; t++) { uint64_t log = B_FALSE; (void) nvlist_lookup_uint64(top[t], ZPOOL_CONFIG_IS_LOG, &log); if (log) continue; if (nvlist_exists(top[t], ZPOOL_CONFIG_ALLOCATION_BIAS)) continue; normal++; } return (normal); } /* * Get and validate the contents of the given vdev specification. This ensures * that the nvlist returned is well-formed, that all the devices exist, and that * they are not currently in use by any other known consumer. The 'poolconfig' * parameter is the current configuration of the pool when adding devices * existing pool, and is used to perform additional checks, such as changing the * replication level of the pool. It can be 'NULL' to indicate that this is a * new pool. The 'force' flag controls whether devices should be forcefully * added, even if they appear in use. */ nvlist_t * make_root_vdev(zpool_handle_t *zhp, nvlist_t *props, int force, int check_rep, boolean_t replacing, boolean_t dryrun, int argc, char **argv) { nvlist_t *newroot; nvlist_t *poolconfig = NULL; is_force = force; /* * Construct the vdev specification. If this is successful, we know * that we have a valid specification, and that all devices can be * opened. */ if ((newroot = construct_spec(props, argc, argv)) == NULL) return (NULL); if (zhp && ((poolconfig = zpool_get_config(zhp, NULL)) == NULL)) { nvlist_free(newroot); return (NULL); } /* * Validate each device to make sure that it's not shared with another * subsystem. We do this even if 'force' is set, because there are some * uses (such as a dedicated dump device) that even '-f' cannot * override. */ if (is_device_in_use(poolconfig, newroot, force, replacing, B_FALSE)) { nvlist_free(newroot); return (NULL); } /* * Check the replication level of the given vdevs and report any errors * found. We include the existing pool spec, if any, as we need to * catch changes against the existing replication level. */ if (check_rep && check_replication(poolconfig, newroot) != 0) { nvlist_free(newroot); return (NULL); } /* * On pool create the new vdev spec must have one normal vdev. */ if (poolconfig == NULL && num_normal_vdevs(newroot) == 0) { vdev_error(gettext("at least one general top-level vdev must " "be specified\n")); nvlist_free(newroot); return (NULL); } /* * Run through the vdev specification and label any whole disks found. */ if (!dryrun && make_disks(zhp, newroot) != 0) { nvlist_free(newroot); return (NULL); } return (newroot); }