Commit Graph

4284 Commits

Author SHA1 Message Date
Coleman Kane fe9d409e90 Linux 6.6 compat: use inode_get/set_ctime*(...)
In Linux commit 13bc24457850583a2e7203ded05b7209ab4bc5ef, direct access
to the i_ctime member of struct inode was removed. The new approach is
to use accessor methods that exclusively handle passing the timestamp
around by value. This change adds new tests for each of these functions
and introduces zpl_* equivalents in include/os/linux/zfs/sys/zpl.h. In
where the inode_get/set_ctime*() functions exist, these zpl_* calls will
be mapped to the new functions. On older kernels, these macros just wrap
direct-access calls. The code that operated on an address of ip->i_ctime
to call ZFS_TIME_DECODE() now will take a local copy using
zpl_inode_get_ctime(), and then pass the address of the local copy when
performing the ZFS_TIME_DECODE() call, in all cases, rather than
directly accessing the member.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15263
Closes #15257
2023-11-08 12:15:41 -08:00
shodanshok 7aef672b77 Read prefetched buffers from L2ARC
Prefetched buffers are currently read from L2ARC if, and only if,
l2arc_noprefetch is set to non-default value of 0. This means that
a streaming read which can be served from L2ARC will instead engage
the main pool.

For example, consider what happens when a file is sequentially read:
- application requests contiguous data, engaging the prefetcher;
- ARC buffers are initially marked as prefetched but, as the calling
application consumes data, the prefetch tag is cleared;
- these "normal" buffers become eligible for L2ARC and are copied to it;
- re-reading the same file will *not* engage L2ARC even if it contains
the required buffers;
- main pool has to suffer another sequential read load, which (due to
most NCQ-enabled HDDs preferring sequential loads) can dramatically
increase latency for uncached random reads.

In other words, current behavior is to write data to L2ARC (wearing it)
without using the very same cache when reading back the same data. This
was probably useful many years ago to preserve L2ARC read bandwidth but,
with current SSD speed/size/price, it is vastly sub-optimal.

Setting l2arc_noprefetch=1, while enabling L2ARC to serve these reads,
means that even prefetched but unused buffers will be copied into L2ARC,
further increasing wear and load for potentially not-useful data.

This patch enable prefetched buffer to be read from L2ARC even when
l2arc_noprefetch=1 (default), increasing sequential read speed and
reducing load on the main pool without polluting L2ARC with not-useful
(ie: unused) prefetched data. Moreover, it clear users confusion about
L2ARC size increasing but not serving any IO when doing sequential
reads.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes #15451
2023-11-06 16:47:51 -08:00
Thomas Bertschinger f9a9aea126 Add mutex_enter_interruptible() for interruptible sleeping IOCTLs
Many long-running ZFS ioctls lock the spa_namespace_lock, forcing
concurrent ioctls to sleep for the mutex. Previously, the only
option is to call mutex_enter() which sleeps uninterruptibly. This
is a usability issue for sysadmins, for example, if the admin runs
`zpool status` while a slow `zpool import` is ongoing, the admin's
shell will be locked in uninterruptible sleep for a long time.

This patch resolves this admin usability issue by introducing
mutex_enter_interruptible() which sleeps interruptibly while waiting
to acquire a lock. It is implemented for both Linux and FreeBSD.

The ZFS_IOC_POOL_CONFIGS ioctl, used by `zpool status`, is changed to
use this new macro so that the command can be interrupted if it is
issued during a concurrent `zpool import` (or other long-running
operation).

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Thomas Bertschinger <bertschinger@lanl.gov>
Closes #15360
2023-11-06 16:47:41 -08:00
Tony Hutter 8ba748d414 Revert "zvol: Temporally disable blk-mq"
This reverts commit aefb6a2bd6.

aefb6a2bd temporally disabled blk-mq until we could fix a fix for

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15439
2023-11-06 16:47:32 -08:00
Tony Hutter e860cb0200 zvol: Remove broken blk-mq optimization
This fix removes a dubious optimization in zfs_uiomove_bvec_rq()
that saved the iterator contents of a rq_for_each_segment().  This
optimization allowed restoring the "saved state" from a previous
rq_for_each_segment() call on the same uio so that you wouldn't
need to iterate though each bvec on every zfs_uiomove_bvec_rq() call.
However, if the kernel is manipulating the requests/bios/bvecs under
the covers between zfs_uiomove_bvec_rq() calls, then it could result
in corruption from using the "saved state".  This optimization
results in an unbootable system after installing an OS on a zvol
with blk-mq enabled.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15351
2023-11-06 16:47:24 -08:00
Alexander Motin 6e41aca519 Trust ARC_BUF_SHARED() more
In my understanding ARC_BUF_SHARED() and arc_buf_is_shared() should
return identical results, except the second also asserts it deeper.
The first is much cheaper though, saving few pointer dereferences.
Replace production arc_buf_is_shared() calls with ARC_BUF_SHARED(),
and call arc_buf_is_shared() in random assertions, while making it
even more strict.

On my tests this in half reduces arc_buf_destroy_impl() time, that
noticeably reduces hash_lock congestion under heavy dbuf eviction.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15397
2023-11-06 16:47:05 -08:00
Alexander Motin 79f7de5752 Remove lock from dsl_pool_need_dirty_delay()
Torn reads/writes of dp_dirty_total are unlikely: on 64-bit systems
due to register size, while on 32-bit due to memory constraints.
And even if we hit some race, the code implementing the delay takes
the lock any way.

Removal of the poll-wide lock acquisition saves ~1% of CPU time on
8-thread 8KB write workload.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15390
2023-11-06 16:46:55 -08:00
Olivier Certner edebca5dfc FreeBSD: taskq: Remove unused declaration
Variable 'uma_align_cache' has not been used since commit "FreeBSD: Use
a hash table for taskqid lookups" (3933305ea).  Moreover, it is soon
going to become private to FreeBSD's UMA in 15.0-CURRENT (main),
14.0-STABLE (stable/14) and 13.2-STABLE (stable/13).  Should accessing
this information become necessary again, one will have to use the new
accessors for recent versions.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olivier Certner <olce.freebsd@certner.fr>
Closes #15416
2023-11-06 16:46:32 -08:00
Colin Percival 1cc1bf4fa7 Set spa_ccw_fail_time=0 when expanding a vdev.
When a vdev is to be expanded -- either via `zpool online -e` or via
the autoexpand option -- a SPA_ASYNC_CONFIG_UPDATE request is queued
to be handled via an asynchronous worker thread (spa_async_thread).
This normally happens almost immediately; but will be delayed up to
zfs_ccw_retry_interval seconds (default 5 minutes) if an attempt to
write the zpool configuration cache failed.

When FreeBSD boots ZFS-root VM images generated using `makefs -t zfs`,
the zpoolupgrade rc.d script runs `zpool upgrade`, which modifies the
pool configuration and triggers an attempt to write to the cache file.
This attempted write fails because the filesystem is still mounted
read-only at this point in the boot process, triggering a 5-minute
cooldown before SPA_ASYNC_CONFIG_UPDATE requests will be handled by
the asynchronous worker thread.

When expanding a vdev, reset the "when did a configuration cache
write last fail" value so that the SPA_ASYNC_CONFIG_UPDATE request
will be handled promptly.  A cleaner but more intrusive option would
be to use separate SPA_ASYNC_ flags for "configuration changed" and
"try writing the configuration cache again", but with FreeBSD 14.0
coming very soon I'd prefer to leave such refactoring for a later
date.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colin Percival <cperciva@FreeBSD.org>
Closes #15405
2023-11-06 16:46:25 -08:00
John Wren Kennedy 6d693e20a2 Large sync writes perform worse with slog
For synchronous write workloads with large IO sizes, a pool configured
with a slog performs worse than one with an embedded zil:

sequential_writes 1m sync ios, 16 threads
  Write IOPS:              1292          438   -66.10%
  Write Bandwidth:      1323570       448910   -66.08%
  Write Latency:       12128400     36330970      3.0x

sequential_writes 1m sync ios, 32 threads
  Write IOPS:              1293          430   -66.74%
  Write Bandwidth:      1324184       441188   -66.68%
  Write Latency:       24486278     74028536      3.0x

The reason is the `zil_slog_bulk` variable. In `zil_lwb_write_open`,
if a zil block is greater than 768K, the priority of the write is
downgraded from sync to async. Increasing the value allows greater
throughput. To select a value for this PR, I ran an fio workload with
the following values for `zil_slog_bulk`:

    zil_slog_bulk    KiB/s
    1048576         422132
    2097152         478935
    4194304         533645
    8388608         623031
    12582912        827158
    16777216       1038359
    25165824       1142210
    33554432       1211472
    50331648       1292847
    67108864       1308506
    100663296      1306821
    134217728      1304998

At 64M, the results with a slog are now improved to parity with an
embedded zil:

sequential_writes 1m sync ios, 16 threads
  Write IOPS:               438         1288      2.9x
  Write Bandwidth:       448910      1319062      2.9x
  Write Latency:       36330970     12163408   -66.52%

sequential_writes 1m sync ios, 32 threads
  Write IOPS:               430         1290      3.0x
  Write Bandwidth:       441188      1321693      3.0x
  Write Latency:       74028536     24519698   -66.88%

None of the other tests in the performance suite (run with a zil or
slog) had a significant change, including the random_write_zil tests,
which use multiple datasets.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: John Wren Kennedy <john.kennedy@delphix.com>
Closes #14378
2023-11-06 16:33:23 -08:00
Alexander Motin b76724ae47 FreeBSD: Improve taskq wrapper
- Group tqent_task and tqent_timeout_task into a union.  They are
never used same time. This shrinks taskq_ent_t from 192 to 160 bytes.
 - Remove tqent_registered.  Use tqent_id != 0 instead.
 - Remove tqent_cancelled.  Use taskqueue pending counter instead.
 - Change tqent_type into uint_t.  We don't need to pack it any more.
 - Change tqent_rc into uint_t, matching refcount(9).
 - Take shared locks in taskq_lookup().
 - Call proper taskqueue_drain_timeout() for TIMEOUT_TASK in
taskq_cancel_id() and taskq_wait_id().
 - Switch from CK_LIST to regular LIST.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15356
2023-11-06 16:33:18 -08:00
Martin Matuška 459c99ff23 Fix block cloning between unencrypted and encrypted datasets
Block cloning from an encrypted dataset into an unencrypted dataset
and vice versa is not possible. The current code did allow cloning
unencrypted files into an encrypted dataset causing a panic when
these were accessed. Block cloning between encrypted and encrypted
is currently supported on the same filesystem only.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Rob N <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes #15464
Closes #15465
2023-11-06 10:40:50 -08:00
Jason King 2bba9fd479 Zpool can start allocating from metaslab before TRIMs have completed
When doing a manual TRIM on a zpool, the metaslab being TRIMmed is
potentially re-enabled before all queued TRIM zios for that metaslab
have completed. Since TRIM zios have the lowest priority, it is 
possible to get into a situation where allocations occur from the 
just re-enabled metaslab and cut ahead of queued TRIMs to the same 
metaslab.  If the ranges overlap, this will cause corruption.

We were able to trigger this pretty consistently with a small single 
top-level vdev zpool (i.e. small number of metaslabs) with heavy 
parallel write activity while performing a manual TRIM against a 
somewhat 'slow' device (so TRIMs took a bit of time to complete). 
With the patch, we've not been able to recreate it since. It was on 
illumos, but inspection of the OpenZFS trim code looks like the 
relevant pieces are largely unchanged and so it appears it would be 
vulnerable to the same issue.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason King <jking@racktopsystems.com>
Illumos-issue: https://www.illumos.org/issues/15939
Closes #15395
2023-10-12 11:05:20 -07:00
Daniel Berlin 810fc49a3e Ensure we call fput when cloning fails due to different devices.
Right now, zpl_ioctl_ficlone and zpl_ioctl_ficlonerange do not call
put on the src fd if the source and destination are on two different
devices.  This leaves the source file held open in this case.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Daniel Berlin <dberlin@dberlin.org>
Closes #15386
2023-10-10 19:19:09 -07:00
Tony Hutter a80e1f1c90 zvol: Temporally disable blk-mq
There was a report of zvol data loss (#15351) after enabling blk-mq on a
zvol backed with 16k physical block sized disks.  Out of an abundance of
caution, do not allow the user to enable blk-mq until we can look into
the issue.

Note that blk-mq was not enabled by default on zvols.  It was always
opt-in via the zvol_use_blk_mq module parameter.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Addresses: #15351
Closes #15378
2023-10-10 19:19:09 -07:00
Alexander Motin f6e6e77ed8 FreeBSD: Reduce divergence from in-tree sources
This includes random small tweaks, primarily a build fixes, required
when ZFS is built as part of FreeBSD base.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15368
2023-10-10 19:19:09 -07:00
Alexander Motin 9be8ddfb3c ZIL: Reduce maximum size of WR_COPIED to 7.5K
Benchmarks show that at certain write sizes range lock/unlock take
not so much time as extra memory copy.  The exact threshold is not
obvious due to other overheads, but it is definitely lower than
~63KB used before.  Make it configurable, defaulting at 7.5KB,
that is 8KB of nearest malloc() size minus itx and lr structs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15353
2023-10-07 09:08:20 -07:00
Rob Norris 33d7c2d165 import: require force when cachefile hostid doesn't match on-disk
Previously, if a cachefile is passed to zpool import, the cached config
is mostly offered as-is to ZFS_IOC_POOL_TRYIMPORT->spa_tryimport(), and
the results are taken as the canonical pool config and handed back to
ZFS_IOC_POOL_IMPORT.

In the course of its operation, spa_load() will inspect the pool and
build a new config from what it finds on disk. However, it then
regenerates a new config ready to import, and so rightly sets the hostid
and hostname for the local host in the config it returns.

Because of this, the "require force" checks always decide the pool is
exported and last touched by the local host, even if this is not true,
which is possible in a HA environment when MMP is not enabled. The pool
may be imported on another head, but the import checks still pass here,
so the pool ends up imported on both.

(This doesn't happen when a cachefile isn't used, because the pool
config is discovered in userspace in zpool_find_import(), and that does
find the on-disk hostid and hostname correctly).

Since the systemd zfs-import-cache.service unit uses cachefile imports,
this can lead to a system returning after a crash with a "valid"
cachefile on disk and automatically, quietly, importing a pool that has
already been taken up by a secondary head.

This commit causes the on-disk hostid and hostname to be included in the
ZPOOL_CONFIG_LOAD_INFO item in the returned config, and then changes the
"force" checks for zpool import to use them if present.

This method should give no change in behaviour for old userspace on new
kernels (they won't know to look for the new config items) and for new
userspace on old kernels (the won't find the new config items).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes #15290
2023-10-07 09:08:20 -07:00
Alexander Motin bcd010d3a5 Reduce number of metaslab preload taskq threads.
Before this change ZFS created threads for 50% of CPUs for each top-
level vdev.  Plus it created the same number of threads for embedded
log groups (that have only one metaslab and don't need any preload).
As result, on system with 80 CPUs and pool of 60 vdevs this resulted
in 4800 metaslab preload threads, that is absolutely insane.

This patch changes the preload threads to 50% of CPUs in one taskq
per pool, so on the mentioned system it will be only 40 threads.

Among other things this fixes zdb on the mentioned system and pool
on FreeBSD, that failed to create so many threads in one process.

Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15319
2023-10-07 09:08:20 -07:00
Alexander Motin 3158b5d718 ARC: Drop different size headers for crypto
To reduce memory usage ZFS crypto allocated bigger by 56 bytes ARC
headers only when specific block was encrypted on disk.  It was a
nice optimization, except in some cases the code reallocated them
on fly, that invalidated header pointers from the buffers.  Since
the buffers use different locking, it created number of races, that
were originally covered (at least partially) by b_evict_lock, used
also to protection evictions.  But it has gone as part of #14340.
As result, as was found in #15293, arc_hdr_realloc_crypt() ended
up unprotected and causing use-after-free.

Instead of introducing some even more elaborate locking, this patch
just drops the difference between normal and protected headers. It
cost us additional 56 bytes per header, but with couple patches
saving 24 bytes, the net growth is only 32 bytes with total header
size of 232 bytes on FreeBSD, that IMHO is acceptable price for
simplicity.  Additional locking would also end up consuming space,
time or both.

Reviewe-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15293
Closes #15347
2023-10-07 09:08:20 -07:00
Alexander Motin ba7797c8db ARC: Remove b_bufcnt/b_ebufcnt from ARC headers
In most cases we do not care about exact number of buffers linked
to the header, we just need to know if it is zero, non-zero or one.
That can easily be checked just looking on b_buf pointer or in some
cases derefencing it.

b_ebufcnt is read only once, and in that case we already traverse
the list as part of arc_buf_remove(), so second traverse should not
be expensive.

This reduces L1 ARC header size by 8 bytes and full crypto header by
16 bytes, down to 176 and 232 bytes on FreeBSD respectively.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15350
2023-10-07 09:08:20 -07:00
Alexander Motin bc77a0c85e ARC: Remove b_cv from struct l1arc_buf_hdr
Earlier as part of #14123 I've removed one use of b_cv.  This patch
reuses the same approach to remove the other one from much more
rare code path.

This saves 16 bytes of L1 ARC header on FreeBSD (reducing it from
200 to 184 bytes) and seems even more on Linux.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15340
2023-10-07 09:08:20 -07:00
Andrew Turner 1611b8e56e Add BTI landing pads to the AArch64 SHA2 assembly
The Arm Branch Target Identification (BTI) extension guards against
branching to an unintended instruction.

To support BTI add the landing pad instructions to the SHA2 functions.
These are from the hint space so are a nop on hardware that lacks BTI
support or if BTI isn't enabled.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Andrew Turner <andrew.turner4@arm.com>
Closes #14862
Closes #15339
2023-10-04 12:36:21 -07:00
George Amanakis 608741d062 Report ashift of L2ARC devices in zdb
Commit 8af1104f does not actually store the ashift of cache devices in
their label. However, in order to facilitate reporting the ashift
through zdb, we enable this in the present commit. We also document
how the retrieval of the ashift is done.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #15331
2023-10-03 09:06:07 -07:00
Alexander Motin 3079bf2e6c Restrict short block cloning requests
If we are copying only one block and it is smaller than recordsize
property, do not allow destination to grow beyond one block if it
is not there yet.  Otherwise the destination will get stuck with
that block size forever, that can be as small as 512 bytes, no
matter how big the destination grow later.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15321
2023-10-03 09:06:07 -07:00
Brian Behlendorf b34bf2d5f6 Tweak rebuild in-flight hard limit
Vendor testing shows we should be able to get a little more
performance if we further relax the hard limit which we're hitting.

Authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15324
2023-10-03 09:06:07 -07:00
Akash B 229ca7d738 Fix ENOSPC for extended quota
When unlinking multiple files from a pool at 100% capacity, it
was possible for ENOSPC to be returned after the first few unlinks.
This issue was fixed previously by PR #13172 but then this was
again introduced by PR #13839.

This is resolved using the existing mechanism of returning ERESTART
when over quota as long as we know enough space will shortly be
available after processing the pending deferred frees.

Also, updated the existing testcase which reliably reproduced the
issue without this patch.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes #15312
2023-09-28 14:28:21 -07:00
Paul Dagnelie 9e36c5769f Don't allocate from new metaslabs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15307
Closes #15308
2023-09-28 14:28:21 -07:00
Rob N a199cac6cd status: report pool suspension state under failmode=continue
When failmode=continue is set and the pool suspends, both 'zpool status'
and the 'zfs/pool/state' kstat ignore it and report the normal vdev tree
state. There's no clear indicator that the pool is suspended. This is
unlike suspend in failmode=wait, or suspend due to MMP check failure,
which both report "SUSPENDED" explicitly.

This commit changes it so SUSPENDED is reported for failmode=continue
the same as for other modes.

Rationale:

The historical behaviour of failmode=continue is roughly, "press on as
though all is well". To this end, the fact that the pool had suspended
was not shown, to maintain the façade that all is well.

Its unclear why hiding this information was considered appropriate. One
possibility is that it was expected that a true pool fault would always
be reported as DEGRADED or FAULTED, and that the pool could not suspend
without these happening.

That is not necessarily true, as vdev health and suspend state are only
loosely connected, such that a pool in (apparent) good health can be
suspended for good reasons, and of course a degraded pool does not lead
to suspension. Even if that expectation were true, there's still a
difference in urgency - a degraded pool may not need to be attended to
for hours, while a suspended pool is most often unusable until an
operator intervenes.

An operator that has set failmode=continue has presumably done so
because their workload is one that can continue to operate in a useful
way when the pool suspends. In this case the operator still needs a
clear indicator that there is a problem that needs attending to.

Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #15297
2023-09-22 16:13:20 -07:00
Paul Dagnelie cc75c816c5 Fix l2arc_apply_transforms ztest crash
In #13375 we modified the allocation size of the buffer that we use 
to apply l2arc transforms to be the size of the arc hdr we're using, 
rather than the allocation size that will be in place on the disk, 
because sometimes the hdr size is larger. Unfortunately, sometimes 
the allocation size is larger, which means that we overflow the buffer 
in that case. This change modifies the allocation to be the max of 
the two values

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15177
Closes #15248
2023-09-22 16:13:20 -07:00
Alexander Motin 62677576a7 ZIL: Fix potential race on flush deferring.
zil_lwb_set_zio_dependency() can not set write ZIO dependency on
previous LWB's write ZIO if one is already in done handler and set
state to LWB_STATE_WRITE_DONE.  So theoretically done handler of
next LWB's write ZIO may run before done handler of previous LWB
write ZIO completes.  In such case we can not defer flushes, since
the flush issue process is not locked.

This may fix some reported assertions of lwb_vdev_tree not being
empty inside zil_free_lwb().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15278
2023-09-20 16:41:23 -07:00
Mateusz Guzik f7a07d76ee Retire z_nr_znodes
Added in ab26409db7 ("Linux 3.1 compat, super_block->s_shrink"), with
the only consumer which needed the count getting retired in 066e825221
("Linux compat: Minimum kernel version 3.10").

The counter gets in the way of not maintaining the list to begin with.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes #15274
2023-09-19 08:52:06 -07:00
наб 0ce7a068e9 check-zstd-symbols: also ignore __pfx_ symbols
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b341b20d648bb7e9a3307c33163e7399f0913e66

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #15282 
Closes #15284
2023-09-19 08:52:06 -07:00
George Amanakis 11943656f9 Update the MOS directory on spa_upgrade_errlog()
spa_upgrade_errlog() does not update the MOS directory when the
head_errlog feature is enabled. In this case if spa_errlog_sync() is not
called, the MOS dir references the old errlog_last and errlog_sync
objects. Thus when doing a scrub a panic will occur:

Call Trace:
 dump_stack+0x6d/0x8b
 panic+0x101/0x2e3
 spl_panic+0xcf/0x102 [spl]
 delete_errlog+0x124/0x130 [zfs]
 spa_errlog_sync+0x256/0x260 [zfs]
 spa_sync_iterate_to_convergence+0xe5/0x250 [zfs]
 spa_sync+0x2f7/0x670 [zfs]
 txg_sync_thread+0x22d/0x2d0 [zfs]
 thread_generic_wrapper+0x83/0xa0 [spl]
 kthread+0x104/0x140
 ret_from_fork+0x1f/0x40

Fix this by updating the related MOS directory objects in
spa_upgrade_errlog().

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #15279 
Closes #15277
2023-09-19 08:51:00 -07:00
Andrea Righi cacc599aa2 Linux 6.5 compat: spl: properly unregister sysctl entries
When register_sysctl_table() is unavailable we fail to properly
unregister sysctl entries under "kernel/spl".

This leads to errors like the following when spl is unloaded/reloaded,
making impossible to properly reload the spl module:

[  746.995704] sysctl duplicate entry: /kernel/spl/kmem/slab_kvmem_total

Fix by cleaning up all the sub-entries inside "kernel/spl" when the
spl module is unloaded.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes #15239
2023-09-19 08:50:01 -07:00
Andrea Righi c7ee59a160 Linux 6.5 compat: safe cleanup in spl_proc_fini()
If we fail to create a proc entry in spl_proc_init() we may end up
calling unregister_sysctl_table() twice: one in the failure path of
spl_proc_init() and another time during spl_proc_fini().

Avoid the double call to unregister_sysctl_table() and while at it
refactor the code a bit to reduce code duplication.

This was accidentally introduced when the spl code was
updated for Linux 6.5 compatibility.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes #15234 
Closes #15235
2023-09-19 08:50:01 -07:00
Coleman Kane 58a707375f Linux 6.5 compat: Use copy_splice_read instead of filemap_splice_read
Using the filemap_splice_read function for the splice_read handler was
leading to occasional data corruption under certain circumstances. Favor
using copy_splice_read instead, which does not demonstrate the same
erroneous behavior under the tested failure cases.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15164
2023-09-19 08:50:01 -07:00
Coleman Kane 5a22de144a Linux 6.5 compat: replace generic_file_splice_read with filemap_splice_read
The generic_file_splice_read function was removed in Linux 6.5 in favor
of filemap_splice_read. Add an autoconf test for filemap_splice_read and
use it if it is found as the handler for .splice_read in the
file_operations struct. Additionally, ITER_PIPE was removed in 6.5. This
change removes the ITER_* macros that OpenZFS doesn't use from being
tested in config/kernel-vfs-iov_iter.m4. The removal of ITER_PIPE was
causing the test to fail, which also affected the code responsible for
setting the .splice_read handler, above. That behavior caused run-time
panics on Linux 6.5.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15155
2023-09-19 08:50:01 -07:00
Coleman Kane 31a4673c05 Linux 6.5 compat: register_sysctl_table removed
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15138
2023-09-19 08:50:01 -07:00
Brian Atkinson 3a68f3c50f Revert "Linux 6.5 compat: register_sysctl_table removed"
This reverts commit b35374fd64 as there
are error messages when loading the SPL module. Errors seemed to be tied
to duplicate a duplicate entry.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #15134
2023-09-19 08:50:01 -07:00
Coleman Kane 8be6308e85 Linux 4.20 compat: wrapper function for iov_iter type access
An iov_iter_type() function to access the "type" member of the struct
iov_iter was added at one point. Move the conditional logic to decide
which method to use for accessing it into a macro and simplify the
zpl_uio_init code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15100
2023-09-19 08:50:01 -07:00
Coleman Kane 0bf2c5365e Linux 6.4 compat: iter_iov() function now used to get old iov member
The iov_iter->iov member is now iov_iter->__iov and must be accessed via
the accessor function iter_iov(). Create a wrapper that is conditionally
compiled to use the access method appropriate for the target kernel
version.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15100
2023-09-19 08:50:01 -07:00
Coleman Kane d76de9fb17 Linux 6.5 compat: blkdev changes
Multiple changes to the blkdev API were introduced in Linux 6.5. This
includes passing (void* holder) to blkdev_put, adding a new
blk_holder_ops* arg to blkdev_get_by_path, adding a new blk_mode_t type
that replaces uses of fmode_t, and removing an argument from the release
handler on block_device_operations that we weren't using. The open
function definition has also changed to take gendisk* and blk_mode_t, so
update it accordingly, too.

Implement local wrappers for blkdev_get_by_path() and
vdev_blkdev_put() so that the in-line calls are cleaner, and place the
conditionally-compiled implementation details inside of both of these
local wrappers. Both calls are exclusively used within vdev_disk.c, at
this time.

Add blk_mode_is_open_write() to test FMODE_WRITE / BLK_OPEN_WRITE
The wrapper function is now used for testing using the appropriate
method for the kernel, whether the open mode is writable or not.

Emphasize fmode_t arg in zvol_release is not used

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15099
2023-09-19 08:50:01 -07:00
Coleman Kane 6c2fc56916 Linux 6.5 compat: register_sysctl_table removed
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15098
2023-09-19 08:50:01 -07:00
Alexander Motin e96fbdba34 Add more constraints for block cloning.
- We cannot clone into files with smaller block size if there is
more than one block, since we can not grow the block size.
 - Block size must be power-of-2 if destination offset != 0, since
there can be no multiple blocks of non-power-of-2 size.

The first should handle the case when destination file has several
blocks but still is not bigger than one block of the source file.
The second fixes panic in dmu_buf_hold_array_by_dnode() on attempt
to concatenate files with equal but non-power-of-2 block sizes.

While there, assert that error is reported if we made no progress.

Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
2023-09-10 14:02:52 -07:00
Volker Mauel 4da8c7d11e Intel QAT 1.7 compatibility
Based on the intel QAT samples which are bundled in the 1.x drivers, 
this is the preferred approach since api version 1.6.  See:

https://www.intel.de/content/www/de/de/download/19734/intel-quickassist-technology-driver-for-linux-hw-version-1-x.html?

Reviewed-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Volker Mauel <volkermauel@gmail.com>
Closes #15190
2023-09-07 16:10:52 -07:00
Alexander Motin 79ac1b29d5 ZIL: Change ZIOs issue order.
In zil_lwb_write_issue(), after issuing lwb_root_zio/lwb_write_zio,
we have no right to access lwb->lwb_child_zio. If it was not there,
the first two ZIOs may have already completed and freed the lwb.
ZIOs issue in opposite order from children to parent should keep
the lwb valid till the end, since the lwb can be freed only after
lwb_root_zio completion callback.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15233
2023-09-02 10:30:38 -07:00
Alexander Motin 7dc2baaa1f ZIL: Revert zl_lock scope reduction.
While I have no reports of it, I suspect possible use-after-free
scenario when zil_commit_waiter() tries to dereference zcw_lwb
for lwb already freed by zil_sync(), while zcw_done is not set.
Extension of zl_lock scope as it was originally should block
zil_sync() from freeing the lwb, closing this race.

This reverts #14959 and couple chunks of #14841.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15228
2023-09-02 10:30:38 -07:00
Alexander Motin 5a7cb0b065 ZIL: Tune some assertions.
In zil_free_lwb() we should first assert lwb_state or the rest of
assertions can be misleading if it is false.

Add lwb_state assertions in zil_lwb_add_block() to make sure we are
not trying to add elements to lwb_vdev_tree after it was processed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15227
2023-09-02 10:30:38 -07:00
Dimitry Andric 400f56e3f8 dmu_buf_will_clone: change assertion to fix 32-bit compiler warning
Building module/zfs/dbuf.c for 32-bit targets can result in a warning:

In file included from
/usr/src/sys/contrib/openzfs/include/sys/zfs_context.h:97,
                 from /usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:32:
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c: In function
'dmu_buf_will_clone':
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:116:33: error:
cast from pointer to integer of different size
[-Werror=pointer-to-int-cast]
  116 |         const uint64_t __left = (uint64_t)(LEFT);
  \
      |                                 ^
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:148:25: note:
in expansion of macro 'VERIFY0'
  148 | #define ASSERT0         VERIFY0
      |                         ^~~~~~~
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:2704:9: note: in
expansion of macro 'ASSERT0'
 2704 |         ASSERT0(dbuf_find_dirty_eq(db, tx->tx_txg));
      |         ^~~~~~~

This is because dbuf_find_dirty_eq() returns a pointer, which if
pointers are 32-bit results in a warning about the cast to uint64_t.

Instead, use the ASSERT3P() macro, with == and NULL as second and third
arguments, which should work regardless of the target's bitness.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes #15224
2023-09-01 09:33:33 -07:00