The 'rootdelay' boot option currently pauses the boot for a specified
amount of time. The original intent was to ensure that slower
configurations would have ample time to enumerate the devices to make
importing the root pool successful. This, however, causes unnecessary
boot delay for environments like Azure which set this parameter by
default.
This commit changes the initramfs logic to pause until it can
successfully load the 'zfs' module. The timeout specified by
'rootdelay' now becomes the maximum amount of time that initramfs will
wait before failing the boot.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14430
systemd-ask-password has a default timeout of 90 seconds, which means
that dracut will fall back to the rescue shell 4.5 minutes after boot if
no password is entered.
This is undesirable when combined with, for example, unlocking remotely
using dracut-sshd and systemd-tty-ask-password-agent. See also
https://github.com/gsauthof/dracut-sshd#timeout and
https://bugzilla.redhat.com/show_bug.cgi?id=868421.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Clemens Lang <neverpanic@gmail.com>
Closes#14341
- Update the link to the OpenZFS Code of Conduct.
- Remove extra "the" from contrib/initramfs/scripts/zfs
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14298Closes#14307
In continuation of previous #13451, this commits adds native-deb*
targets for make to build native debian packages. Github workflows
are updated to build and test native Debian packages.
Native packages only build with pre-configured paths (see the
dh_auto_configure section in contrib/debian/rules.in). While
building native packages, paths should not be configured. Initial
config flags e.g. '--enable-debug' are replaced in
contrib/debian/rules.in.
Additional packages on top of existing zfs packages required to
build native packages include debhelper-compat, dh-python, dkms,
po-debconf, python3-all-dev, python3-sphinx.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#14265
If the fields to be listed and sorted by are constrained to those
populated by dsl_dataset_fast_stat(), then zfs list is much faster,
as it does not need to open each objset and reads its properties.
A previous optimization by Pawel Dawidek
(0cee24064a) took advantage
of this to make listing snapshot names sorted only by name much faster.
However, it was limited to `-o name -s name`, this work extends this
optimization to work with:
- name
- guid
- createtxg
- numclones
- inconsistent
- redacted
- origin
and could be further extended to any other properties supported by
dsl_dataset_fast_stat() or similar, that do not require extra locking
or reading from disk.
This was committed before (9a9e2e343d),
but was reverted due to a regression when used with an older kernel.
If the kernel does not populate zc->zc_objset_stats, we now fallback
to getting the properties via the slower interface, to avoid problems
with newer userland and older kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14110
Legacy mountpoint datasets should not pass `-o zfsutil` to `mount.zfs`.
Fix the logic in `mount_fs()` to not forget we have a legacy mountpoint
when checking for an `org.zol:mountpoint` userprop.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#14274
When reviewing Clang Static Analyzer reports against a branch that had
experimental header changes based on the Coverity model file to inform
it that KM_SLEEP allocations cannot return NULL, I found a report saying
that a KM_PUSHPAGE allocation returned NULL. The actual implementation
does not return NULL unless KM_NOSLEEP has been passed, so we backport
the correction from the experimental header changes to the Coverity
model.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14210
- Add new SC2312 global exclude.
```
Consider invoking this command separately to avoid masking its return
value (or use '|| true' to ignore). [SC2312]
```
- Correct errors detected by new ShellCheck version.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#14148
If a user that uses systemd and dracut wants to overide certain
settings, they typically use `systemctl edit [unit]` or place a file in
`/etc/systemd/system/[unit].d/override.conf` directly.
The zfs-dracut module did not include those overrides however, so this
did not have any effect at boot time.
For zfs-import-scan.service and zfs-import-cache.service, overrides are
now included in the dracut initramfs image.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Vince van Oosten <techhazard@codeforyouand.me>
Closes#14075Closes#14076
Currently, the Debian packages are generated from ALIEN that converts
RPMs to Debian packages. This commit adds native Debian packaging for
Debian based systems.
This packaging is a fork of Debian zfs-linux 2.1.6-2 release.
(source: https://salsa.debian.org/zfsonlinux-team/zfs)
Some updates have been made to keep the footprint minimal that
include removing the tests, translation files, patches directory etc.
All credits go to Debian ZFS on Linux Packaging Team.
For copyright information, please refer to contrib/debian/copyright.
scripts/debian-packaging.sh can be used to invoke the build.
Reviewed-by: Mo Zhou <cdluminate@gmail.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#13451
Upon review, it was found that the model for malloc() was incorrect.
In addition, several general purpose memory allocation functions were
missing models:
* kmem_vasprintf()
* kmem_asprintf()
* kmem_strdup()
* kmem_strfree()
* spl_vmem_alloc()
* spl_vmem_zalloc()
* spl_vmem_free()
* calloc()
As an experiment to try to find more bugs, some less than general
purpose memory allocation functions were also given models:
* zfsvfs_create()
* zfsvfs_free()
* nvlist_alloc()
* nvlist_dup()
* nvlist_free()
* nvlist_pack()
* nvlist_unpack()
Finally, the models were improved using additional coverity primitives:
* __coverity_negative_sink__()
* __coverity_writeall0__()
* __coverity_mark_as_uninitialized_buffer__()
* __coverity_mark_as_afm_allocated__()
In addition, an attempt to inform coverity that certain modelled
functions read entire buffers was used by adding the following to
certain models:
int first = buf[0];
int last = buf[buflen-1];
It was inspired by the QEMU model file.
No additional false positives were found by this, but it is believed
that the more accurate model file will help to catch false positives in
the future.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14048
9a49c6b782 was intended to fix this issue,
but I had missed the case in pam_sm_open_session(). Clang's static
analyzer had not reported it and I forgot to look for other cases.
Interestingly, GCC gcc-12.1.1_p20220625's static analyzer had caught
this as multiple double-free bugs, since another failure after the
failure in zfs_key_config_load() will cause us to attempt to free the
memory that zfs_key_config_load() was supposed to allocate, but had
cleaned up upon failure.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13978
Both Clang's Static Analyzer and Synopsys' Coverity would ignore
assertions. Following Clang's advice, we annotate our assertions:
https://clang-analyzer.llvm.org/annotations.html#custom_assertions
This makes both Clang's Static Analyzer and Coverity properly identify
assertions. This change reduced Clang's reported defects from 246 to
180. It also reduced the false positives reported by Coverityi by 10,
while enabling Coverity to find 9 more defects that previously were
false negatives.
A couple examples of this would be CID-1524417 and CID-1524423. After
submitting a build to coverity with the modified assertions, CID-1524417
disappeared while the report for CID-1524423 no longer claimed that the
assertion tripped.
Coincidentally, it turns out that it is possible to more accurately
annotate our headers than the Coverity modelling file permits in the
case of format strings. Since we can do that and this patch annotates
headers whenever `__coverity_panic__()` would have been used in the
model file, we drop all models that use `__coverity_panic__()` from the
model file.
Upon seeing the success in eliminating false positives involving
assertions, it occurred to me that we could also modify our headers to
eliminate coverity's false positives involving byte swaps. We now have
coverity specific byteswap macros, that do nothing, to disable
Coverity's false positives when we do byte swaps. This allowed us to
also drop the byteswap definitions from the model file.
Lastly, a model file update has been done beyond the mentioned
deletions:
* The definitions of `umem_alloc_aligned()`, `umem_alloc()` andi
`umem_zalloc()` were originally implemented in a way that was
intended to inform coverity that when KM_SLEEP has been passed these
functions, they do not return NULL. A small error in how this was
done was found, so we correct it.
* Definitions for umem_cache_alloc() and umem_cache_free() have been
added.
In practice, no false positives were avoided by making these changes,
but in the interest of correctness from future coverity builds, we make
them anyway.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13902
Clang's static analyzer found that config.uid is uninitialized when
zfs_key_config_load() returns an error.
Oddly, this was not included in the unchecked return values that
Coverity found.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13957
Coverity caught unsafe use of `strcpy()` in `ztest_dmu_objset_own()`,
`nfs_init_tmpfile()` and `dump_snapshot()`. It also caught an unsafe use
of `strlcat()` in `nfs_init_tmpfile()`.
Inspired by this, I did an audit of every single usage of `strcpy()` and
`strcat()` in the code. If I could not prove that the usage was safe, I
changed the code to use either `strlcpy()` or `strlcat()`, depending on
which function was originally used. In some cases, `snprintf()` was used
to replace multiple uses of `strcat` because it was cleaner.
Whenever I changed a function, I preferred to use `sizeof(dst)` when the
compiler is able to provide the string size via that. When it could not
because the string was passed by a caller, I checked the entire call
tree of the function to find out how big the buffer was and hard coded
it. Hardcoding is less than ideal, but it is safe unless someone shrinks
the buffer sizes being passed.
Additionally, Coverity reported three more string related issues:
* It caught a case where we do an overlapping memory copy in a call to
`snprintf()`. We fix that via `kmem_strdup()` and `kmem_strfree()`.
* It caught `sizeof (buf)` being used instead of `buflen` in
`zdb_nicenum()`'s call to `zfs_nicenum()`, which is passed to
`snprintf()`. We change that to pass `buflen`.
* It caught a theoretical unterminated string passed to `strcmp()`.
This one is likely a false positive, but we have the information
needed to do this more safely, so we change this to silence the false
positive not just in coverity, but potentially other static analysis
tools too. We switch to `strncmp()`.
* There was a false positive in tests/zfs-tests/cmd/dir_rd_update.c. We
suppress it by switching to `snprintf()` since other static analysis
tools might complain about it too. Interestingly, there is a possible
real bug there too, since it assumes that the passed directory path
ends with '/'. We add a '/' to fix that potential bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13913
When receiving full/newfs on existing dataset, then it should be done
with "-F" flag. Its enforced for initial receive in checks done in
zfs_receive_one function of libzfs. Similarly, on resuming full/newfs
recv on existing dataset, it should be done with "-F" flag.
When dataset doesn't exist, then full/new recv is done on newly created
dataset and it's marked INCONSISTENT. But when receiving on existing
dataset, recv is first done on %recv and its marked INCONSISTENT.
Existing dataset is not marked INCONSISTENT. Resume of full/newfs
receive with dataset not INCONSISTENT indicates that its resuming newfs
on existing dataset. So, enforce "-F" flag in this case.
Also return an error from dmu_recv_resume_begin_check() in zfs kernel,
when its resuming full/newfs recv without force.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#13856Closes#13857
Recently, I have been making a push to fix things that coverity found.
However, I was curious what Clang's static analyzer reported, so I ran
it and found things that coverity had missed.
* contrib/pam_zfs_key/pam_zfs_key.c: If prop_mountpoint is passed more
than once, we leak memory.
* module/zfs/zcp_get.c: We leak memory on temporary properties in
userspace.
* tests/zfs-tests/cmd/draid.c: On error from vdev_draid_rand(), we leak
memory if best_map had been allocated by a prior iteration.
* tests/zfs-tests/cmd/mkfile.c: Memory used by the loop is not freed
before program termination.
Arguably, these are all minor issues, but if we ignore them, then they
could obscure serious bugs, so we fix them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13955
Coverity caught these.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13889
`uu_panic()` needs to be modelled and the definition of `vpanic()` from
the original coverity model was missing
`__coverity_format_string_sink__()`.
We also model `libspl_assertf()` as part of an attempt to eliminate
false positives.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13901
Other projects such as the python project include their coverity models
in their repositories. This provides transparency, which is beneficial
in open source projects. Therefore, it is a good idea to include the
coverity model in our repository too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13884
When the zfs-snapshot-bootfs service attempts to create a snapshot
that already exists, the exit status of the command is non-zero and
the service reports failed to the systemd service manager. This is a
common occurrence if bootfs.snapshot is left set on the kernel command
line and it should not be considered a failure.
This service was originally set to ignore this error by prefixing
the command with - on the ExecStart line, but the leading - appears
to have been dropped in #13359.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Closes#13769
This type of recv is used to heal corrupted data when a replica
of the data already exists (in the form of a send file for example).
With the provided send stream, corrective receive will read from
disk blocks described by the WRITE records. When any of the reads
come back with ECKSUM we use the data from the corresponding WRITE
record to rewrite the corrupted block.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@axcient.com>
Closes#9372
Simply prevent overwriting root until it needs to be overwritten.
Dracut could change this value before this module is called, but won't
change the kernel command line.
Reviewed-by: Andrew J. Hesford <ajh@sideband.org>
Signed-off-by: Toyam Cox <vaelatern@voidlinux.org>
Closes#13592
Change zfs-snapshot-bootfs.service to zfs-rollback-bootfs.service in
cmdline point 4 of README.md.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Closes#13609
Due to a missing semicolon on the ExecStart line, it wasn't possible
to specify the snapshot name on the bootfs.{rollback,snapshot}
kernel parameters if the boot dataset name was obtained from the
root=zfs:... kernel parameter.
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Closes#13585
Format the `zpool get` command correctly. The -o option must
be followed by "all" or the requested field name.
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13602
The zfs-load-module.service service is not currently provided by
the OpenZFS repository so we cannot safely assume it exists.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes#13574
This allows ZFS datasets to be delegated to a user/mount namespace
Within that namespace, only the delegated datasets are visible
Works very similarly to Zones/Jailes on other ZFS OSes
As a user:
```
$ unshare -Um
$ zfs list
no datasets available
$ echo $$
1234
```
As root:
```
# zfs list
NAME ZONED MOUNTPOINT
containers off /containers
containers/host off /containers/host
containers/host/child off /containers/host/child
containers/host/child/gchild off /containers/host/child/gchild
containers/unpriv on /unpriv
containers/unpriv/child on /unpriv/child
containers/unpriv/child/gchild on /unpriv/child/gchild
# zfs zone /proc/1234/ns/user containers/unpriv
```
Back to the user namespace:
```
$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
containers 129M 47.8G 24K /containers
containers/unpriv 128M 47.8G 24K /unpriv
containers/unpriv/child 128M 47.8G 128M /unpriv/child
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Will Andrews <will.andrews@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Buddy <https://buddy.works>
Closes#12263
The EXTRA_DIST variable is ignored when used in the FALSE conditional
of a Makefile.am. This results in the `make dist` target omitting
these files from the generated tarball unless CONFIG_USER is defined.
This issue can be avoided by switching to use the dist_noinst_DATA
variable which is handled as expected by autoconf.
This change also adds support for --with-config=dist as an alias
for --with-config=srpm and updates the GitHub workflows to use it.
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13459Closes#13505
Also make the pyzfs build actually out-of-tree and quiet by default
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Rapptz <rapptz@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13316
No installation diff, dist lost
-zfs-2.1.99/cmd/fsck_zfs/fsck.zfs
which was distributed erroneously, since it's generated
Also clean gitrev on clean
Also add -e 'any possible bashisms' to default checkbashisms flags,
and fully parallelise it and shellcheck, and it works out-of-tree, too
Also align the Release in the dist META file correctly
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13316
It was originally released in dracut 008 in February 2011;
we can probably drop it now
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
Thorough documentation with a dracut.bootup(7)-style flowchart,
dracut.cmdline(7)-style cmdline listing,
and per-file docs like the old README
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
This fixes at least one race I got with an encrypted root
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
Also don't set ROOTFS_MOUNTED; the final mention was removed in dracut
011 from July 2011
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
The only user is mount-zfs.sh (non-systemd systems),
so reduce it to what it needs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
So far, everything parsed root= manually, which meant that while
zfs-parse.sh was updated, and supposedly supported + -> ' ' conversion,
it meant nothing
Instead, centralise parsing, and allow:
root=
root=zfs
root=zfs:
root=zfs:AUTO
root=ZFS=data/set
root=zfs:data/set
root=zfs:ZFS=data/set (as a side-effect; allowed but undocumented)
rootfstype=zfs AND root=data/set <=> root=data/set
rootfstype=zfs AND root= <=> root=zfs:AUTO
So rootfstype=zfs /also/ behaves as expected, and + decoding works
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
It was added in the original ae26d0465a ("Add dracut support") commit
in 2011, and was then broken a bit later with the advent of
dracut-zfs-generator, or maybe earlier as part of other churn
Either way, it's broken, and has been in 2.0+ as well, and no-one
complained. Stop pretending we support it at all
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
The switch was released in dracut 009 in March 2011,
we can safely get rid of the compatibility hook
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13291
A followup to d7a67402a8
For `mount -t zfs -o opts ds mp` command line
some implementations of `mount(8)`, e. g. Busybox in Debian
work as follows:
```
newfstatat(AT_FDCWD, "ds", 0x7fff826f4ab0, 0) = -1
mount("ds", "mp", "zfs", MS_SILENT, NULL) = 0
```
The logic above skips completely `mount.zfs` and prevents us
from reading filesystem properties and applying mount options.
For comparison, the coreutils `mount(8)` implementation does:
```
openat(AT_FDCWD, "/proc/filesystems", O_RDONLY|O_CLOEXEC) = 3
// figure out that zfs is a `nodev` filesystem and look for a helper
newfstatat(AT_FDCWD, "/sbin/mount.zfs" ...) = 0
execve("/sbin/mount.zfs" ...) = 0
```
Using `mount.zfs` in initramfs would help circumvent deficiencies
of some of `mount(8)` implementations. `mount -t zfs` translates
to `mount.zfs` invocation, except for cases when explicitly disabled
by `-i`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#13305
George Wilson
Clemens Lang
Brian Behlendorf
Umer Saleem
Allan Jude
Ryan Moeller
Richard Yao
szubersk
Vince van Oosten
Jitendra Patidar
gregory-lee-bartholomew
Tino Reichardt
Alek P
Toyam Cox
Matthew Thode
Will Andrews
наб