Changed spa_export_common() such that it no longer holds the
spa_namespace_lock for the entire duration and instead sets
spa_export_thread to indicate an import is in progress on the
spa. This allows for an export to a diffent pool to proceed
in parallel while an export is still processing potentially
long operations like spa_unload_log_sm_flush_all().
Calls like spa_lookup() and spa_vdev_enter() that rely on
the spa_namespace_lock to serialize them against a concurrent
export, now wait for any in-progress export thread to complete
before proceeding.
The 'zpool import -a' sub-command also provides multi-threaded
support, using a thread pool to submit the exports in parallel.
Sponsored-By: Klara Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Simplify vdev probes in the zio_vdev_io_done context to
avoid holding the spa config lock for a long duration.
Also allow zpool clear if no evidence of another host
is using the pool.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#15839
This commit allow spa_load() to drop the spa_namespace_lock so
that imports can happen concurrently. Prior to dropping the
spa_namespace_lock, the import logic will set the spa_load_thread
value to track the thread which is doing the import.
Consumers of spa_lookup() retain the same behavior by blocking
when either a thread is holding the spa_namespace_lock or the
spa_load_thread value is set. This will ensure that critical
concurrent operations cannot take place while a pool is being
imported.
The zpool command is also enhanced to provide multi-threaded support
when invoking zpool import -a.
Lastly, zinject provides a mechanism to insert artificial delays
when importing a pool and new zfs tests are added to verify parallel
import functionality.
Contributions-by: Don Brady <don.brady@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#16093
Detail the import progress of log spacemaps as they can take a very
long time. Also grab the spa_note() messages to, as they provide
insight into what is happening
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Closes#15539
Turns out decompression never worked at all; likely an oversight
converting the original "transparent" versions to a true compression
option. This makes it work.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Missed in #15696, backporting #15675.
Signed-off-by: Rob Norris <robn@despairlabs.com>
(cherry picked from commit 437d598fa31cd77db30421c5d1bdaf7dafad8a71)
This is just renaming the existing functions we're about to replace and
grouping them together to make the next commits easier to follow.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
(cherry picked from commit 9bf6a7c8c3bdcc4e5975fa5baf6e9ff6f279a553)
The regular ABD iterators yield data buffers, so they have to map and
unmap pages into kernel memory. If the caller only wants to count
chunks, or can use page pointers directly, then the map/unmap is just
unnecessary overhead.
This adds adb_iterate_page_func, which yields unmapped struct page
instead.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
(cherry picked from commit 930b785c61e9724f0a3a0e09571032ed397f368c)
Before 5.4 we have to do a little math.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
(cherry picked from commit 93fb150fa4de5c1b25c261c762da2f95338005eb)
Entries in the dbuf cache contribute only the size of the dbuf data to
the cache size. Attached "user" data is not counted. This can lead to
the data currently "owned" by the cache consuming more memory accounting
appears to show. In some cases (eg a metadnode data block with all child
dnode_t slots allocated), the actual size can be as much as 3x as what
the cache believes it to be.
This is arguably correct behaviour, as the cache is only tracking the
size of the dbuf data, not even the overhead of the dbuf_t. On the other
hand, in the above case of dnodes, evicting cached metadnode dbufs is
the only current way to reclaim the dnode objects, and can lead to the
situation where the dbuf cache appears to be comfortably within its
target memory window and yet is holding enormous amounts of slab memory
that cannot be reclaimed.
This commit adds a facility for a dbuf user to artificially inflate the
apparent size of the dbuf for caching purposes. This at least allows for
cache tuning to be adjusted to match something closer to the real memory
overhead.
metadnode dbufs carry a >1KiB allocation per dnode in their user data.
This informs the dbuf cache machinery of that fact, allowing it to make
better decisions when evicting dbufs.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15511
(cherry picked from commit 92dc4ad83d)
Previous flushing algorithm limited only total number of log blocks to
the minimum of 256K and 4x number of metaslabs in the pool. As result,
system with 1500 disks with 1000 metaslabs each, touching several new
metaslabs each TXG could grow spacemap log to huge size without much
benefits. We've observed one of such systems importing pool for about
45 minutes.
This patch improves the situation from five sides:
- By limiting maximum period for each metaslab to be flushed to 1000
TXGs, that effectively limits maximum number of per-TXG spacemap logs
to load to the same number.
- By making flushing more smooth via accounting number of metaslabs
that were touched after the last flush and actually need another flush,
not just ms_unflushed_txg bump.
- By applying zfs_unflushed_log_block_pct to the number of metaslabs
that were touched after the last flush, not all metaslabs in the pool.
- By aggressively prefetching per-TXG spacemap logs up to 16 TXGs in
advance, making log spacemap load process for wide HDD pool CPU-bound,
accelerating it by many times.
- By reducing zfs_unflushed_log_block_max from 256K to 128K, reducing
single-threaded by nature log processing time from ~10 to ~5 minutes.
As further optimization we could skip bumping ms_unflushed_txg for
metaslabs not touched since the last flush, but that would be an
incompatible change, requiring new pool feature.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12789
(cherry picked from commit cbfe5cb849518dd8fb65bf94a72fd88a15093a67)
Use error thresholds from policy to control whether to scrub data
and/or metadata. If threshold is set to UINT64_MAX, then caller
probably does not care about result and we may skip that part.
By default import neither set the data error threshold nor read
the error counter, so skip the data scrub for faster import.
Metadata are still scrubbed and fail if even single error found.
While there just for symmetry return number of metadata errors in
case threshold is not set to zero and we haven't reached it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#13022
(cherry picked from commit f2c5bc150e)
Enables vdev traces for ZIL writes, and then only issues flushes to
things that were written to.
This simplifies a few things. We no longer have to extract the toplevel
vdevs to flush from the block pointer; instead we just look at what was
written. The vdev tree remains as a means to defer flushes to the next
lwb, which means a bit more copying trees, but also means we no longer
have to lock the tree.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
If you have a trace tree from, say, a write, hand it directly to
zio_flush_traced() to flush only the leaf vdevs that were involved in
the write.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Meant for external callers to be able to build trace trees that can
later be submitted back to zio for work. Its hardly necessary, but saves
needing to double up on kmem cache and comparison function.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
The idea here is that you can add a flag to a zio, and every vdev that
contributed to the successful completion of that zio will be referenced
on the "trace tree". You can poke around in here from your _done handler
to do any per-vdev followup work.
The actual use case is to track the vdevs that were actually written to,
in order to have a list of vdevs that we should flush. Thats why it
looks like the ZIL vdev flush tracker - the only difference is that it
will also list interior and leaf vdevs, not just toplevel vdevs.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
We ran out of space in enum zio_flag for additional flags. Rather than
introduce enum zio_flag2 and then modify a bunch of functions to take a
second flags variable, we expand the type to 64 bits via `typedef
uint64_t zio_flag_t`.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Richard Yao <richard.yao@klarasystems.com>
Closes#14086
zio_ioctl() is the only user of zio_flush(), and its structure and flag
use is fairly specific to flushing. So here we bring the guts of
zio_ioctl() into zio_flush(), allowing some light reorganising (mostly
around how zio_nowait() is called) and a better signature.
This will help in the future when changing the way flush works, as its
clear where the change should be made and no wondering if zio_ioctl() is
being used somewhere else.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
A single "page" in an ABD does not necessarily correspond to one segment
in a bio, because of how ZFS does ABD allocations and how it breaks them
up with adding them to a bio. Because of this, simply dividing the ABD
size by the page size can only ever give a minimum number of segments
required, rather than the correct number.
Until we can fix that, we'll just make each bio as large as they can be
for as many segments as the device queue will permit without needing to
split the the bio. This is a little wasteful if we don't intend to put
that many segments in the bio, but its not a lot of memory and its only
lost until the bio is completed.
This also adds a tuneable, vdev_disk_max_segs, to allow setting this
value to be set by the operator. This is very useful for debugging.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit a3a438d1bedb0626417cd73ba10b1479a06bef7f)
This commit extends the zpool-reguid(8) command with a -g flag, which
allows the user to specify the GUID to set.
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara Inc.
zil_commit() has always returned void, and thus, cannot fail. Everything
inside it assumed that if anything ever went wrong, it could fall back
on txg_wait_synced() until the txg covering the operations being flushed
from the ZIL has fully committed. This meant that if the pool failed and
failmode=continue was set, syncing operations like fsync() would still
block.
Unblocking zil_commit() means largely the same approach. The difficulty
is that the ZIL carries the record of uncommitted VFS operations (vs the
changed data), and attached to those, callbacks and cvs that will
release userspace callers once the data is on disk. So if we can't write
the ZIL, we also can't release those records until the data is on disk.
This wasn't a problem before, because the zil_commit() would block. If
we change zil_commit() to return error, we still need to track those
entries until the data they represent hits the disk. We also need to
accept new records; just because the ZIL fails may not necessarily mean
the pool itself is unavailable.
This commit reorganises the ZIL to allow zil_commit() to return failure.
If ZIL writes or flushes fail, the ZIL is moved into a "failed" state,
and no further writes are done; all zil_commit() calls are serviced by
the regular txg mechanism. Outstanding records (itx_ts) are held until
the main pool writes their associated txg out. The records are then
released. Once all records are cleared, the ZIL is reset and reopened.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit af821006f6602261e690fe6635689cabdeefcadf)
Ignoring flush errors makes it possible for callers to never know that
their writes didn't succeed, and allows writes to be lost if the pool
fails.
This commit gives zio_flush() a flag argument, and updates the call
sites to pass ZIO_FLAG_DONT_PROPAGATE to it. Thus, this commit does not
change any behaviour, but opens the floor for further changes to allow
those callers to handle flush failures sensibly.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit 6d0deb8a5a0c3d6bbc69d9625d55fc776bb98ea3)
This is like DMU_TX_ASSIGN_NOSUSPEND, but only when failmode=continue,
and returning EIO if the pool is suspended. Its designed to be easy to
use from syscalls and similar without the ceremony of checking the for
EAGAIN and failmode every time.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit 6bed8644dd2afa0e39727e9e90642479c2416521)
Their names clash with those for txg_wait_synced_tx, and they aren't
directly compatible, leading to confusion.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
(cherry picked from commit 1f0fb1dae7c1e84de3b39e669e09b8b3d5b80b87)
This is primarily of use when a pool has lost its disk, while the user
doesn't care about any pending (or otherwise) transactions.
Implement various control methods to make this feasible:
- txg_wait can now take a NOSUSPEND flag, in which case the caller will
be alerted if their txg can't be committed. This is primarily of
interest for callers that would normally pass TXG_WAIT, but don't want
to wait if the pool becomes suspended, which allows unwinding in some
cases, specifically when one is attempting a non-forced export.
Without this, the non-forced export would preclude a forced export
by virtue of holding the namespace lock indefinitely.
- txg_wait also returns failure for TXG_WAIT users if a pool is actually
being force exported. Adjust most callers to tolerate this.
- spa_config_enter_flags now takes a NOSUSPEND flag to the same effect.
- DMU objset initiator which may be set on an objset being forcibly
exported / unmounted.
- SPA export initiator may be set on a pool being forcibly exported.
- DMU send/recv now use an interruption mechanism which relies on the
SPA export initiator being able to enumerate datasets and closing any
send/recv streams, causing their EINTR paths to be invoked.
- ZIO now has a cancel entry point, which tells all suspended zios to
fail, and which suppresses the failures for non-CANFAIL users.
- metaslab, etc. cleanup, which consists of simply throwing away any
changes that were not able to be synced out.
- Linux specific: introduce a new tunable,
zfs_forced_export_unmount_enabled, which allows the filesystem to
remain in a modified 'unmounted' state upon exiting zpl_umount_begin,
to achieve parity with FreeBSD and illumos,
which have VFS-level support for yanking filesystems out from under
users. However, this only helps when the user is actively performing
I/O, while not sitting on the filesystem. In particular, this allows
test #3 below to pass on Linux.
- Add basic logic to zpool to indicate a force-exporting pool, instead
of crashing due to lack of config, etc.
Add tests which cover the basic use cases:
- Force export while a send is in progress
- Force export while a recv is in progress
- Force export while POSIX I/O is in progress
This change modifies the libzfs ABI:
- New ZPOOL_STATUS_FORCE_EXPORTING zpool_status_t enum value.
- New field libzfs_force_export for libzfs_handle.
Signed-off-by: Will Andrews <will@firepipe.net>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Catalogics, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#3461
(cherry picked from commit 852e633772217d779a63e8c46fe3c5f81dd8960e)
This is a squashed commit of the commits from
03a64568f318c696b9e4be19429e72b446c97462 to
1c64f0c8832b34bfa82645125351d6c62815ae21 developed by Fred Weigel.
Usage:
cat /proc/spl/kstat/zfs/POOLNAME/stats
The following changes has been applied during the rebase of the patches
on top of the 2.1.5 branch:
- Drop ZFS_IOC_ADD_LOG. This ioctl was introduced to support introducing
messages into the ZFS kernel log. It was used for debugging during
development. The implementation of this debugging feature made `zpool
addlog` output messages to /proc/spl/kstat/zfs/dbgmsg. The messages
could later be retrieved with `zdbgmsg show`.
- Change the fmgw.c entry in lib/libzpool/Makefile.am to json_stats.c.
The fmgw.c file has already been renamed to json_stats.c in other
places.
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
(cherry picked from commit 75f3395d7fc0c93c02c8a8e792515f3e821aa05a)
As of the Linux 5.19 kernel the asm/fpu/internal.h header was
entirely removed. It has been effectively empty since the 5.16
kernel and provides no required functionality.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13529
As of the Linux 5.19 kernel an identically named zap_flags_t typedef
is declared in the include/linux/mm_types.h linux header. Sadly,
the inclusion of this header cannot be easily avoided. To resolve
the conflict a #define is used to remap the name in the OpenZFS
sources when building against the Linux kernel.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13515
As of the Linux 5.19 kernel the disk_*_io_acct() helper functions
have been replaced by the bdev_*_io_acct() functions.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13515
Linux 5.19 commit torvalds/linux@44abff2c0 removed the
blk_queue_secure_erase() helper function. The preferred
interface is to now use the bdev_max_secure_erase_sectors()
function to check for discard support.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13515
Linux 5.19 commit torvalds/linux@70200574cc removed the
blk_queue_discard() helper function. The preferred interface
is to now use the bdev_max_discard_sectors() function to check
for discard support.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13515
This was breaking the kmod port build on FreeBSD with Clang 13.
Use the same trick as we do for ASSERT() to make DNODE_VERIFY() use
its parameter at compile time without actually using it at run time
in non-debug builds.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#13507
Holding a dbuf is a common operation which can become highly contended
in dbuf_find() when acquiring the dbuf hash mutex. This is particularly
true on Linux when reading/writing volumes since by default up to 32
threads from the zvol_taskq may be taking a hold of the same dbuf.
This should also be observable on FreeBSD as long as there are enough
processes accessing the volume concurrently.
This is further aggregrated by the fact that only the block id will
be unique when calculating the dbuf hash for a single volume. The
objset id, object id, and level will be the same for data blocks.
This has been observed to result in a somehwat less than uniform hash
distribution and a longer than expected max hash chain depth (~20)
on a large memory system (256 GB) using volumes.
This commit improves the siutation by switching the hash mutex to
an rwlock to allow concurrent lookups, and increasing DBUF_RWLOCKS
from 2048 to 8192 to further reduce the odds of a hash collision.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13405
The only zdb utility require to read metaslab-related data during
read-only pool import because of spacemaps validation. Add global
variable which will allow zdb read spacemaps in case of readonly
import mode.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#9095Closes#12687
For legacy reasons, a couple of VOPs have to return error numbers that
don't come from the usual errno namespace. To handle the cases where
ZFS_ENTER or ZFS_VERIFY_ZP fail, we need to be able to override the
default error return value of EIO. Extend the macros to permit this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#13311
This PR changes ZFS ACL checks to evaluate
fsuid / fsgid rather than euid / egid to avoid
accidentally granting elevated permissions to
NFS clients.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Andrew Walker <awalker@ixsystems.com>
Co-authored-by: Ryan Moeller <freqlabs@FreeBSD.org>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes#13221
Commit 3b52ccd7d introduced a flaw where FSR and FSAVE are not restored
when using a Linux 5.16 kernel. These instructions are only used when
XSAVE is not supported by the processor meaning only some systems will
encounter this issue.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13210Closes#13236
When unlinking multiple files from a pool at 100% capacity, it was
possible for ENOSPC to be returned after the first unlink. e.g.
rm -f /mnt/fs/test1.0.0 /mnt/fs/test1.1.0 /mnt/fs/test1.2.0
rm: cannot remove '/mnt/fs/test1.1.0': No space left on device
rm: cannot remove '/mnt/fs/test1.2.0': No space left on device
After waiting for the pending deferred frees from the first unlink to
be processed the remaining files can then be unlinked. This is caused
by the quota limit in dsl_dir_tempreserve_impl() being temporarily
decreased to the allocatable pool capacity less any deferred free
space.
This is resolved using the existing mechanism of returning ERESTART
when over quota as long as we know enough space will shortly be
available after processing the pending deferred frees.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13172
Observed when building on CentOS 8 Stream. Remove the `out`
label at the end of the function and instead return.
linux/simd_x86.h: In function 'kfpu_begin':
linux/simd_x86.h:337:1: error: label at end of compound statement
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13089
Linux 5.16 moved XSTATE_XSAVE and XSTATE_XRESTORE out of our reach,
so add our own XSAVE{,OPT,S} code and use it for Linux 5.16.
Please note that this differs from previous behavior in that it
won't handle exceptions created by XSAVE an XRSTOR. This is sensible
for three reasons.
- Exceptions during XSAVE and XRSTOR can only occur if the feature
is not supported or enabled or the memory operand isn't aligned
on a 64 byte boundary. If this happens something else went
terribly wrong, and it may be better to stop execution.
- Previously we just printed a warning and didn't handle the fault,
this is arguable for the above reason.
- All other *SAVE instruction also don't handle exceptions, so this
at least aligns behavior.
Finally add a test to catch such a regression in the future.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#13042Closes#13059
Add support for http and https to the keylocation properly to
allow encryption keys to be fetched from the specified URL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #9543Closes#9947Closes#11956
For kernel to send snapshot mount/unmount events to zed.
For kernel to send symlink creates/removes on zvol plumbing.
(/dev/run/dsk/zvol/$pool/$zvol -> /dev/diskX)
If zed misses the ENODEV, all errors after are EINVAL. Treat any error
as kernel module failure.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#12416
Don Brady
Don Brady
George Wilson
Rob Norris
Mateusz Guzik
Rob Norris
Alexander Motin
Richard Yao
Mateusz Piotrowski
Fred Weigel
Mariusz Zaborski
Brian Behlendorf
Ryan Moeller
Mark Johnston
наб
Attila Fülöp
Jorgen Lundman