Commit Graph

26 Commits

Author SHA1 Message Date
Nikolay Borisov 82a1b2d628 Check whether the kernel supports i_uid/gid_read/write helpers
Since the concept of a kuid and the need to translate from it to
ordinary integer type was added in kernel version 3.5 implement necessary
plumbing to be able to detect this condition during compile time. If
the kernel doesn't support the kuid then just fall back to directly
accessing the respective struct inode's members

Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4685
Issue #227
2016-07-25 13:21:49 -07:00
Brian Behlendorf 278bee9319 Linux 3.18 compat: Snapshot auto-mounting
Re-factor the .zfs/snapshot auto-mouting code to take in to account
changes made to the upstream kernels.  And to lay the groundwork for
enabling access to .zfs snapshots via NFS clients.  This patch makes
the following core improvements.

* All actively auto-mounted snapshots are now tracked in two global
trees which are indexed by snapshot name and objset id respectively.
This allows for fast lookups of any auto-mounted snapshot regardless
without needing access to the parent dataset.

* Snapshot entries are added to the tree in zfsctl_snapshot_mount().
However, they are now removed from the tree in the context of the
unmount process.  This eliminates the need complicated error logic
in zfsctl_snapshot_unmount() to handle unmount failures.

* References are now taken on the snapshot entries in the tree to
ensure they always remain valid while a task is outstanding.

* The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right
after the auto-mount succeeds.  This allows to kernel to unmount
idle auto-mounted snapshots if needed removing the need for the
zfsctl_unmount_snapshots() function.

* Snapshots in active use will not be automatically unmounted.  As
long as at least one dentry is revalidated every zfs_expire_snapshot/2
seconds the auto-unmount expiration timer will be extended.

* Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS
to be immediately unmounted when the dentry was revalidated.  This
was a consequence of ZFS invaliding all snapdir dentries to ensure that
negative dentries didn't mask new snapshots.  This patch modifies the
behavior such that only negative dentries are invalidated.  This solves
the issue and may result in a performance improvement.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3589
Closes #3344
Closes #3295
Closes #3257
Closes #3243
Closes #3030
Closes #2841
2015-08-31 13:54:39 -07:00
Brian Behlendorf e80da86447 Linux 4.2 compat: bdi_setup_and_register()
The vfs_compat.h header should include the linux/backing-dev.h header
because it depends on the bdi_* functions defined there.  In previous
kernels this header was being indirectly included which prevented a
build failure.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #3596
2015-07-17 09:15:43 -07:00
Brian Behlendorf 8c45def24a Linux 4.0 compat: bdi_setup_and_register()
The 'capabilities' argument which was passed to bdi_setup_and_register()
has been removed.  File systems should no longer pass BDI_CAP_MAP_COPY.
For our purposes this means there are now three different interfaces
which must be handled.  A zpl_bdi_setup_and_register() wrapper function
has been introduced to provide a single interface to the ZPL code.

* 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported.
* 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments.
* 4.0 - x.y, bdi_setup_and_register() takes 2 arguments.

I've also taken this opportunity to remove HAVE_BDI because kernels
older then 2.6.32 are no longer supported.  All kernels newer than
this will have one of the above interfaces.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes #3128
2015-03-03 10:49:45 -08:00
Jörg Thalheim 534759fad3 Linux 3.19 compat: file_inode was added
struct access f->f_dentry->d_inode was replaced by accessor function
file_inode(f)

Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3084
2015-02-10 11:24:51 -08:00
Richard Yao 194e56234a Include sys/taskq.h in linux/vfs_compat.h
We should have included sys/taskq.h directly because we use the taskq
code here, but we instead had files that included sys/taskq.h also
include sys/kmem.h, which happened to include sys/taskq.h. sys/kmem.h no
longer does this, so we must define the include as we should
have done in the first place.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2411
2014-08-14 12:38:17 -07:00
Chris Wedgwood 62a05896e8 Allow building without ACLs
Some kernel definitions were buried inside the #if... #endif logic for
ACLs.  When ACLs are not available these definitions get lost causing
the build to fail.

Signed-off-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2349
2014-05-30 12:01:57 -07:00
Richard Yao 9d317793aa Implement File Attribute Support
We add support for lsattr and chattr to resolve a regression caused
by 88c283952f that broke Python's
xattr.list(). That changet broke Gentoo Portage's FEATURES=xattr,
which depended on Python's xattr.list().

Only attributes common to both Solaris and Linux are supported. These
are 'a', 'd' and 'i' in Linux's lsattr and chattr commands. File
attributes exclusive to Solaris are present in the ZFS code, but cannot
be accessed or modified through this method.  That was the case prior to
this patch. The resolution of issue zfsonlinux/zfs#229 should implement
some method to permit access and modification of Solaris-specific
attributes.

References:
  https://bugs.gentoo.org/show_bug.cgi?id=483516

Original-patch-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1691
2014-05-01 10:11:18 -07:00
Chunwei Chen 408ec0d2e1 Linux 3.14 compat: posix_acl_{create,chmod}
posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod}

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
2014-04-10 14:27:03 -07:00
Michael Kjorling d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1821
2013-12-18 16:46:35 -08:00
Massimo Maggi b695c34ea4 Honor CONFIG_FS_POSIX_ACL kernel option
The required Posix ACL interfaces are only available for kernels
with CONFIG_FS_POSIX_ACL defined.  Therefore, only enable Posix
ACL support for these kernels.  All major distribution kernels
enable CONFIG_FS_POSIX_ACL by default.

If your kernel does not support Posix ACLs the following warning
will be printed at ZFS module load time.

  "ZFS: Posix ACLs disabled by kernel"

Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1825
2013-11-05 16:22:05 -08:00
Massimo Maggi 023699cd62 Posix ACL Support
This change adds support for Posix ACLs by storing them as an xattr
which is common practice for many Linux file systems.  Since the
Posix ACL is stored as an xattr it will not overwrite any existing
ZFS/NFSv4 ACLs which may have been set.  The Posix ACL will also
be non-functional on other platforms although it may be visible
as an xattr if that platform understands SA based xattrs.

By default Posix ACLs are disabled but they may be enabled with
the new 'aclmode=noacl|posixacl' property.  Set the property to
'posixacl' to enable them.  If ZFS/NFSv4 ACL support is ever added
an appropriate acltype will be added.

This change passes the POSIX Test Suite cleanly with the exception
of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too).

  http://www.tuxera.com/community/posix-test-suite/

Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #170
2013-10-29 14:54:26 -07:00
Li Dongyang 802e7b5feb Add SEEK_DATA/SEEK_HOLE to lseek()/llseek()
The approach taken was the rework zfs_holey() as little as
possible and then just wrap the code as needed to ensure
correct locking and error handling.

Tested with xfstests 285 and 286.  All tests pass except for
7-9 of 285 which try to reserve blocks first via fallocate(2)
and fail because fallocate(2) is not yet supported.

Note that the filp->f_lock spinlock did not exist prior to
Linux 2.6.30, but we avoid the need for autotools check by
virtue of the fact that SEEK_DATA/SEEK_HOLE support was not
added until Linux 3.1.

An autoconf check was added for lseek_execute() which is
currently a private function but the expectation is that it
will be exported perhaps as early as Linux 3.11.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1384
2013-07-02 09:24:43 -07:00
Brian Behlendorf 88c283952f Return -EOPNOTSUPP for ZFS_IOC_{GET|SET}FLAGS
Until these hooks are fully implemented return the expected
-EOPNOTSUPP error to indicate they are not functional.  This
allows test suites such as xfstests to cleanly skip testing
this functionality until it's implemented.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #229
2013-06-26 15:20:13 -07:00
Brian Behlendorf 7b3e34ba5a Fix 'zfs rollback' on mounted file systems
Rolling back a mounted filesystem with open file handles and
cached dentries+inodes never worked properly in ZoL.  The
major issue was that Linux provides no easy mechanism for
modules to invalidate the inode cache for a file system.

Because of this it was possible that an inode from the previous
filesystem would not get properly dropped from the cache during
rolling back.  Then a new inode with the same inode number would
be create and collide with the existing cached inode.  Ideally
this would trigger an VERIFY() but in practice the error wasn't
handled and it would just NULL reference.

Luckily, this issue can be resolved by sprucing up the existing
Solaris zfs_rezget() functionality for the Linux VFS.

The way it works now is that when a file system is rolled back
all the cached inodes will be traversed and refetched from disk.
If a version of the cached inode exists on disk the in-core
copy will be updated accordingly.  If there is no match for that
object on disk it will be unhashed from the inode cache and
marked as stale.

This will effectively make the inode unfindable for lookups
allowing the inode number to be immediately recycled.  The inode
will then only be accessible from the cached dentries.  Subsequent
dentry lookups which reference a stale inode will result in the
dentry being invalidated.  Once invalidated the dentry will drop
its reference on the inode allowing it to be safely pruned from
the cache.

Special care is taken for negative dentries since they do not
reference any inode.  These dentires will be invalidate based
on when they were added to the dentry cache.  Entries added
before the last rollback will be invalidate to prevent them
from masking real files in the dataset.

Two nice side effects of this fix are:

* Removes the dependency on spl_invalidate_inodes(), it can now
  be safely removed from the SPL when we choose to do so.

* zfs_znode_alloc() no longer requires a dentry to be passed.
  This effectively reverts this portition of the code to its
  upstream counterpart.  The dentry is not instantiated more
  correctly in the Linux ZPL layer.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #795
2013-01-17 09:51:20 -08:00
Richard Yao 95f5c63b47 Linux 3.6 compat, iops->mkdir()
Use .mkdir instead of .create in 3.3 compatibility check.  Linux 3.6
modifies inode_operations->create's function prototype. This causes
an autotools Linux 3.3. compatibility check for a function prototype
change in create, mkdir and mknode to fail. Since mkdir and mknode
are unchanged, we modify the check to examine it instead.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #873
2012-10-14 15:29:26 -07:00
Yuxuan Shui 3c20361075 Linux 3.6 compat, sget()
As of Linux commit 9249e17fe094d853d1ef7475dd559a2cc7e23d42 the
mount flags are now passed to sget() so they can be used when
initializing a new superblock.

ZFS never uses sget() in this fashion so we can simply pass a
zero and add a zpl_sget() compatibility wrapper.

Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #873
2012-10-14 13:06:48 -07:00
Richard Yao 739a1a82e0 Linux 3.5 compat, end_writeback() changed to clear_inode()
The end_writeback() function was changed by moving the call to
inode_sync_wait() earlier in to evict().   This effecitvely changes
the ordering of the sync but it does not impact the details of
the zfs implementation.

However, as part of this change end_writeback() was renamed to
clear_inode() to reflect the new semantics.  This change does
impact us and clear_inode() now maps to end_writeback() for
kernels prior to 3.5.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #784
2012-07-23 12:29:36 -07:00
Brian Behlendorf b39d3b9f7b Linux 3.3 compat, iops->create()/mkdir()/mknod()
The mode argument of iops->create()/mkdir()/mknod() was changed from
an 'int' to a 'umode_t'.  To prevent a compiler warning an autoconf
check was added to detect the API change and then correctly set a
zpl_umode_t typedef.  There is no functional change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #701
2012-04-30 12:52:38 -07:00
Darik Horn 28eb9213d8 Linux 3.2 compat: set_nlink()
Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit

  SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170

Use the new set_nlink() kernel function instead.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #462
2011-12-16 20:02:52 -08:00
Brian Behlendorf 5547c2f1bf Simplify BDI integration
Update the code to use the bdi_setup_and_register() helper to
simplify the bdi integration code.  The updated code now just
registers the bdi during mount and destroys it during unmount.

The only complication is that for 2.6.32 - 2.6.33 kernels the
helper wasn't available so in these cases the zfs code must
provide it.  Luckily the bdi_setup_and_register() function
is trivial.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #367
2011-11-08 10:19:03 -08:00
Brian Behlendorf 76659dc110 Add backing_device_info per-filesystem
For a long time now the kernel has been moving away from using the
pdflush daemon to write 'old' dirty pages to disk.  The primary reason
for this is because the pdflush daemon is single threaded and can be
a limiting factor for performance.  Since pdflush sequentially walks
the dirty inode list for each super block any delay in processing can
slow down dirty page writeback for all filesystems.

The replacement for pdflush is called bdi (backing device info).  The
bdi system involves creating a per-filesystem control structure each
with its own private sets of queues to manage writeback.  The advantage
is greater parallelism which improves performance and prevents a single
filesystem from slowing writeback to the others.

For a long time both systems co-existed in the kernel so it wasn't
strictly required to implement the bdi scheme.  However, as of
Linux 2.6.36 kernels the pdflush functionality has been retired.

Since ZFS already bypasses the page cache for most I/O this is only
an issue for mmap(2) writes which must go through the page cache.
Even then adding this missing support for newer kernels was overlooked
because there are other mechanisms which can trigger writeback.

However, there is one critical case where not implementing the bdi
functionality can cause problems.  If an application handles a page
fault it can enter the balance_dirty_pages() callpath.  This will
result in the application hanging until the number of dirty pages in
the system drops below the dirty ratio.

Without a registered backing_device_info for the filesystem the
dirty pages will not get written out.  Thus the application will hang.
As mentioned above this was less of an issue with older kernels because
pdflush would eventually write out the dirty pages.

This change adds a backing_device_info structure to the zfs_sb_t
which is already allocated per-super block.  It is then registered
when the filesystem mounted and unregistered on unmount.  It will
not be registered for mounted snapshots which are read-only.  This
change will result in flush-<pool> thread being dynamically created
and destroyed per-mounted filesystem for writeback.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #174
2011-08-04 13:37:38 -07:00
Prasad Joshi b312979252 Tear down and flush the mmap region
The inode eviction should unmap the pages associated with the inode.
These pages should also be flushed to disk to avoid the data loss.
Therefore, use truncate_setsize() in evict_inode() to release the
pagecache.

The API truncate_setsize() was added in 2.6.35 kernel. To ensure
compatibility with the old kernel, the patch defines its own
truncate_setsize function.

Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Closes #255
2011-06-27 09:59:19 -07:00
Brian Behlendorf 3117dd0b90 Handle NULL in nfsd .fsync() hook
How nfsd handles .fsync() has been changed a couple of times in the
recent kernels.  But basically there are three cases we need to
consider.

Linux 2.6.12 - 2.6.33
* The .fsync() hook takes 3 arguments
* The nfsd will call .fsync() with a NULL file struct pointer.

Linux 2.6.34
* The .fsync() hook takes 3 arguments
* The nfsd no longer calls .fsync() but instead used sync_inode()

Linux 2.6.35 - 2.6.x
* The .fsync() hook takes 2 arguments
* The nfsd no longer calls .fsync() but instead used sync_inode()

For once it looks like we've gotten lucky.  The first two cases can
actually be collased in to one if we stop using the file struct
pointer entirely.  Since the dentry is still passed in both cases
this is possible.  The last case can then be safely handled by
unconditionally using the dentry in the file struct pointer now
that we know the nfsd caller has been removed.

Closes #230
2011-05-06 12:33:45 -07:00
Brian Behlendorf bdf4328b04 Linux 2.6.28 compat, insert_inode_locked()
Added insert_inode_locked() helper function, prior to this most callers
used insert_inode_hash().  The older method doesn't check for collisions
in the inode_hashtable but it still acceptible for use.  Fallback to
using insert_inode_hash() when insert_inode_locked() is unavailable.
2011-03-22 12:15:54 -07:00
Brian Behlendorf 7268e1bec8 Linux 2.6.35 compat, fops->fsync()
The fsync() callback in the file_operations structure used to take
3 arguments.  The callback now only takes 2 arguments because the
dentry argument was determined to be unused by all consumers.  To
handle this a compatibility prototype was added to ensure the right
prototype is used.  Our implementation never used the dentry argument
either so it's just a matter of using the right prototype.
2011-02-11 09:05:51 -08:00