Commit Graph

1334 Commits

Author SHA1 Message Date
Matthew Ahrens a1d477c24c OpenZFS 7614, 9064 - zfs device evacuation/removal
OpenZFS 7614 - zfs device evacuation/removal
OpenZFS 9064 - remove_mirror should wait for device removal to complete

This project allows top-level vdevs to be removed from the storage pool
with "zpool remove", reducing the total amount of storage in the pool.
This operation copies all allocated regions of the device to be removed
onto other devices, recording the mapping from old to new location.
After the removal is complete, read and free operations to the removed
(now "indirect") vdev must be remapped and performed at the new location
on disk.  The indirect mapping table is kept in memory whenever the pool
is loaded, so there is minimal performance overhead when doing operations
on the indirect vdev.

The size of the in-memory mapping table will be reduced when its entries
become "obsolete" because they are no longer used by any block pointers
in the pool.  An entry becomes obsolete when all the blocks that use
it are freed.  An entry can also become obsolete when all the snapshots
that reference it are deleted, and the block pointers that reference it
have been "remapped" in all filesystems/zvols (and clones).  Whenever an
indirect block is written, all the block pointers in it will be "remapped"
to their new (concrete) locations if possible.  This process can be
accelerated by using the "zfs remap" command to proactively rewrite all
indirect blocks that reference indirect (removed) vdevs.

Note that when a device is removed, we do not verify the checksum of
the data that is copied.  This makes the process much faster, but if it
were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be
possible to copy the wrong data, when we have the correct data on e.g.
the other side of the mirror.

At the moment, only mirrors and simple top-level vdevs can be removed
and no removal is allowed if any of the top-level vdevs are raidz.

Porting Notes:

* Avoid zero-sized kmem_alloc() in vdev_compact_children().

    The device evacuation code adds a dependency that
    vdev_compact_children() be able to properly empty the vdev_child
    array by setting it to NULL and zeroing vdev_children.  Under Linux,
    kmem_alloc() and related functions return a sentinel pointer rather
    than NULL for zero-sized allocations.

* Remove comment regarding "mpt" driver where zfs_remove_max_segment
  is initialized to SPA_MAXBLOCKSIZE.

  Change zfs_condense_indirect_commit_entry_delay_ticks to
  zfs_condense_indirect_commit_entry_delay_ms for consistency with
  most other tunables in which delays are specified in ms.

* ZTS changes:

    Use set_tunable rather than mdb
    Use zpool sync as appropriate
    Use sync_pool instead of sync
    Kill jobs during test_removal_with_operation to allow unmount/export
    Don't add non-disk names such as "mirror" or "raidz" to $DISKS
    Use $TEST_BASE_DIR instead of /tmp
    Increase HZ from 100 to 1000 which is more common on Linux

    removal_multiple_indirection.ksh
        Reduce iterations in order to not time out on the code
        coverage builders.

    removal_resume_export:
        Functionally, the test case is correct but there exists a race
        where the kernel thread hasn't been fully started yet and is
        not visible.  Wait for up to 1 second for the removal thread
        to be started before giving up on it.  Also, increase the
        amount of data copied in order that the removal not finish
        before the export has a chance to fail.

* MMP compatibility, the concept of concrete versus non-concrete devices
  has slightly changed the semantics of vdev_writeable().  Update
  mmp_random_leaf_impl() accordingly.

* Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool
  feature which is not supported by OpenZFS.

* Added support for new vdev removal tracepoints.

* Test cases removal_with_zdb and removal_condense_export have been
  intentionally disabled.  When run manually they pass as intended,
  but when running in the automated test environment they produce
  unreliable results on the latest Fedora release.

  They may work better once the upstream pool import refectoring is
  merged into ZoL at which point they will be re-enabled.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Reece <alex@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://www.illumos.org/issues/7614
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb
Closes #6900
2018-04-14 12:16:17 -07:00
Seth Forshee 93b43af10d Allow mounting datasets more than once
Currently mounting an already mounted zfs dataset results in an
error, whereas it is typically allowed with other filesystems.
This causes some bad interactions with mount namespaces. Take
this sequence for example:

- Create a dataset
- Create a snapshot of the dataset
- Create a clone of the snapshot
- Create a new mount namespace
- Rename the original dataset

The rename results in unmounting and remounting the clone in the
original mount namespace, however the remount fails because the
dataset is still mounted in the new mount namespace. (Note that
this means the mount in the new mount namespace is never being
unmounted, so perhaps the unmount/remount of the clone isn't
actually necessary.)

The problem here is a result of the way mounting is implemented
in the kernel module. Since it is not mounting block devices it
uses mount_nodev() instead of the usual mount_bdev(). However,
mount_nodev() is written for filesystems for which each mount is
a new instance (i.e. a new super block), and zfs should be able
to detect when a mount request can be satisfied using an existing
super block.

Change zpl_mount() to call sget() directly with it's own test
callback. Passing the objset_t object as the fs data allows
checking if a superblock already exists for the dataset, and in
that case we just need to return a new reference for the sb's
root dentry.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Closes #5796
Closes #7207
2018-04-13 10:44:05 -07:00
Brian Behlendorf d6bb22171b
Linux compat 4.16: blk_queue_flag_{set,clear}
The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in
the original 10f88c5c commit because blk_queue_write_cache()
was available for the in-kernel builds.

Update the blk_queue_flag_{set,clear} wrappers to call the locked
versions to avoid confusion.  This is safe for all existing callers.

The blk_queue_set_write_cache() function has been updated to use
these wrappers.  This means setting/clearing both QUEUE_FLAG_WC
and QUEUE_FLAG_FUA is no longer atomic but this only done early
in zvol_alloc() prior to any requests so there is no issue.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Kash Pande <kash@tripleback.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7428 
Closes #7431
2018-04-12 19:46:14 -07:00
Tom Caputi edc1e713c2 Fix race in dnode_check_slots_free()
Currently, dnode_check_slots_free() works by checking dn->dn_type
in the dnode to determine if the dnode is reclaimable. However,
there is a small window of time between dnode_free_sync() in the
first call to dsl_dataset_sync() and when the useraccounting code
is run when the type is set DMU_OT_NONE, but the dnode is not yet
evictable, leading to crashes. This patch adds the ability for
dnodes to track which txg they were last dirtied in and adds a
check for this before performing the reclaim.

This patch also corrects several instances when dn_dirty_link was
treated as a list_node_t when it is technically a multilist_node_t.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7147 
Closes #7388
2018-04-10 11:15:05 -07:00
Giuseppe Di Natale 10f88c5cd5 Linux compat 4.16: blk_queue_flag_{set,clear}
queue_flag_{set,clear}_unlocked are now private interfaces in
the Linux kernel (https://github.com/torvalds/linux/commit/8a0ac14).
Use blk_queue_flag_{set,clear} interfaces which were introduced as
of https://github.com/torvalds/linux/commit/8814ce8.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7410
2018-04-10 10:32:14 -07:00
Giuseppe Di Natale 9125f8f5bd Linux compat 4.16: SECTOR_SIZE
As of https://github.com/torvalds/linux/commit/233bde21,
SECTOR_SIZE is defined in linux/blkdev.h. Define SECTOR_SIZE
in sunldi.h only if it's not already defined.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #697
2018-04-09 17:20:06 -07:00
Tony Hutter 4f301661df Revert "Handle zap_add() failures in mixed ... "
This reverts commit cc63068e95.

Under certain circumstances this change can result in an ENOSPC
error when adding new files to a directory.  See #7401 for full
details.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #7401 
Cloes #7416
2018-04-09 14:24:46 -07:00
Matthew Ahrens 5c27ec1088 Fixes for SNPRINTF_BLKPTR with encrypted BP's
mdb doesn't have dmu_ot[], so we need a different mechanism for its
SNPRINTF_BLKPTR() to determine if the BP is encrypted vs authenticated.

Additionally, since it already relies on BP_IS_ENCRYPTED (etc),
SNPRINTF_BLKPTR might as well figure out the "crypt_type" on its own,
rather than making the caller do so.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #7390
2018-04-06 13:30:26 -07:00
Brian Behlendorf 581bc01a07
Remove sysevents
These headers are provided in the ZFS repository and never used
by the SPL.  Remove them to ensure the right ones are included.

Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #696
2018-04-04 09:54:20 -07:00
Tom Caputi a2c2ed1bd4 Decryption error handling improvements
Currently, the decryption and block authentication code in
the ZIO / ARC layers is a bit inconsistent with regards to
the ereports that are produces and the error codes that are
passed to calling functions. This patch ensures that all of
these errors (which begin as ECKSUM) are converted to EIO
before they leave the ZIO or ARC layer and that ereports
are correctly generated on each decryption / authentication
failure.

In addition, this patch fixes a bug in zio_decrypt() where
ECKSUM never gets written to zio->io_error.

Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7372
2018-03-31 11:12:51 -07:00
LOLi 77d8a0f1a4 Fix hung z_zvol tasks during 'zfs receive'
During a receive operation zvol_create_minors_impl() can wait
needlessly for the prefetch thread because both share the same tasks
queue.  This results in hung tasks:

<3>INFO: task z_zvol:5541 blocked for more than 120 seconds.
<3>      Tainted: P           O  3.16.0-4-amd64
<3>"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

The first z_zvol:5541 (zvol_task_cb) is waiting for the long running
traverse_prefetch_thread:260

root@linux:~# cat /proc/spl/taskq
taskq                       act  nthr  spwn  maxt   pri  mina
spl_system_taskq/0            1     2     0    64   100     1
	active: [260]traverse_prefetch_thread [zfs](0xffff88003347ae40)
	wait: 5541
spl_delay_taskq/0             0     1     0     4   100     1
	delay: spa_deadman [zfs](0xffff880039924000)
z_zvol/1                      1     1     0     1   120     1
	active: [5541]zvol_task_cb [zfs](0xffff88001fde6400)
	pend: zvol_task_cb [zfs](0xffff88001fde6800)

This change adds a dedicated, per-pool, prefetch taskq to prevent the
traverse code from monopolizing the global (and limited) system_taskq by
inappropriately scheduling long running tasks on it.

Reviewed-by: Albert Lee <trisk@forkgnu.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6330 
Closes #6890 
Closes #7343
2018-03-30 12:10:01 -07:00
Andriy Gapon 5e00213e43 OpenZFS 9164 - assert: newds == os->os_dsl_dataset
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
* Re-enabled and tweaked the zpool_upgrade_007_pos test case
  to successfully run in under 5 minutes.

OpenZFS-issue: https://www.illumos.org/issues/9164
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0e776dc06a
Closes #6112
Closes #7336
2018-03-30 12:00:40 -07:00
Matthew Ahrens 2fd92c3d6c enable zfs_dbgmsg() by default, without dprintf()
zfs_dbgmsg() should record a message by default.  As a general
principal, these messages shouldn't be too verbose.  Furthermore, the
amount of memory used is limited to 4MB (by default).

dprintf() should only record a message if this is a debug build, and
ZFS_DEBUG_DPRINTF is set in zfs_flags.  This flag is not set by default
(even on debug builds).  These messages are extremely verbose, and
sometimes nontrivial to compute.

SET_ERROR() should only record a message if ZFS_DEBUG_SET_ERROR is set
in zfs_flags.  This flag is not set by default (even on debug builds).

This brings our behavior in line with illumos.  Note that the message
format is unchanged (including file, line, and function, even though
these are not recorded on illumos).

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #7314
2018-03-21 15:37:32 -07:00
Tom Caputi 089fbf313c Add comments for portable dnode / objset flags
This patch adds some comments describing the purpose of "portable"
dnode and objset flags so that it is clear when new flags should
be added to the repective flag masks. This patch includes no
functional changes.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7313
2018-03-20 11:55:21 -07:00
Alek P 272b5d730f Add JSON output support to channel programs
The changes piggyback JSON output support on top of channel programs 
(#6558).  This way the JSON output support is targeted to scripting 
use cases and is easily maintainable since it really only touches 
one function (zfs_do_channel_program()).

This patch ports Joyent's JSON nvlist library from illumos to enable 
easy JSON printing of channel program output nvlist.  To keep the 
delta small I also took advantage of the fact that printing in
zfs_do_channel_program() was almost always done before exiting 
the program.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #7281
2018-03-19 12:40:58 -07:00
Olaf Faaland cec3a0a1bb Report pool suspended due to MMP
When the pool is suspended, record whether it was due to an I/O error or
due to MMP writes failing to succeed within the required time.

Change spa_suspended from uint8_t to zio_suspend_reason_t to store the
reason.

When userspace queries pool status via spa_tryimport(), report the
reason the pool was suspended in a new key,
ZPOOL_CONFIG_SUSPENDED_REASON.

In libzfs, when interpreting the returned config nvlist, report
suspension due to MMP with a new pool status enum value,
ZPOOL_STATUS_IO_FAILURE_MMP.

In status_callback(), which generates and emits the message when 'zpool
status' is executed, add a case to print an appropriate message for the
new pool status enum value.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7296
2018-03-15 10:56:55 -07:00
Chunwei Chen 9470cbd4f9 Fix race in trace point in zrl_add_impl
We hit an illegal memory access in the zrlock trace point. The problem
is that zrl->zr_owner and zrl->zr_caller are assigned locklessly. And if
zrl->zr_owner got assigned a longer string between when __string()
calculate the strlen, and when __assign_str() does strcpy. The copy will
overflow the buffer.

==
For example:

Initial condition:
zrl->zr_owner = A
zrl->zr_caller = "abc"

Thread A                                 Thread B
-------------------------------------------------
if (zrl->zr_owner == A) {
  DTRACE_PROBE2() {
    __string() {
      strlen(zrl->zr_caller) -> 3
      allocate buf[4]
    }

                                        zrl->zr_owner = B
				        zrl->zr_caller = "abcd"

    __assign_str() {
      strcpy(buf, zrl->zr_caller) <- buffer overflow
==

Dereferencing zrl->zr_owner->pid may also be problematic, in that the
zrl->zr_owner got changed to other task, and that task exits, freeing
the task_struct. This should be very unlikely, as the other task need to
zrl_remove and exit between the dereferencing zr->zr_owner and
zr->zr_owner->pid. Nevertheless, we'll deal with it as well.

To fix the zrl->zr_caller issue, instead of copy the string content, we
just copy the pointer, this is safe because it always points to
__func__, which is static. As for the zrl->zr_owner issue, we pass in
curthread instead of using zrl->zr_owner.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7291
2018-03-12 11:27:02 -07:00
Tomohiro Kusumi 6b8655ad3f Change functions which return literals to return `const char*`
get_format_prompt_string() and zpool_state_to_name() return
a string literal which is read-only, thus they should return
`const char*`.

zpool_get_prop_string() returns a non-const string after
successful nv-lookup, and returns a string literal otherwise.
Since this function is designed to be used for read-only purpose,
the return type should also be `const char*`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes #7285
2018-03-09 13:47:32 -08:00
Olaf Faaland d2160d0538 Record skipped MMP writes in multihost_history
Once per pass through the MMP thread's loop, the vdev tree is walked to
find a suitable leaf to write the next MMP block to.  If no such leaf is
found, the thread sleeps for a while and resumes at the top of the loop.

Add an entry to multihost_history when no leaf can be found, and record
the reason in the error column.  The error code for such entries is a
bitfield, displayed in hex:

0x1  At least one vdev (interior or leaf) was not writeable.
0x2  At least one writeable leaf vdev was found, but it had a pending
MMP write.

timestamp = the time in seconds since the epoch when no leaf could be
found originally.

duration = the time (in ns) during which no MMP block was written for
this reason.  This does not include the preceeding inter-write period
nor the following inter-write period.

vdev_guid = the number of sequential cycles of the MMP thread looop when
this occurred.

Sample output, truncated to fit:

For records of skipped MMP writes the right-most column, vdev_path, is
reported as "-".

id   txg  timestamp   error  duration    mmp_delay  vdev_guid     ...
936  11   1520036441  0      146264      891422313  1740883117838 ...
937  11   1520036441  0      163956      888356657  7320395061548 ...
938  11   1520036442  0      130690      885314969  7320395061548 ...
939  11   1520036442  0      2001068577  882296582  1740883117838 ...
940  11   1520036443  0      161806      882296582  7320395061548 ...
941  11   1520036443  0x2    0           998020546  1             ...
942  11   1520036444  0      136585      998020546  7320395061548 ...
943  11   1520036444  0x2    0           998020257  1             ...
944  11   1520036445  5      2002662964  994160219  1740883117838 ...
945  11   1520036445  0x2    998073118   994160219  3             ...
946  11   1520036447  0      247136      994160219  7320395061548 ...

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7212
2018-03-06 15:15:15 -08:00
Giuseppe Di Natale dd3e1e3083 Linux 4.16 compat: get_disk_and_module()
As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk()
is now get_disk_and_module(). Add a configure check to determine
if we need to use get_disk_and_module().

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7264
2018-03-05 12:44:35 -08:00
Tony Hutter 80d52c3919 Change checksum & IO delay ratelimit values
Change checksum & IO delay ratelimit thresholds from 5/sec to 20/sec.
This allows zed to actually trigger if a bunch of these events arrive in
a short period of time (zed has a threshold of 10 events in 10 sec).
Previously, if you had, say, 100 checksum errors in 1 sec, it would get
ratelimited to 5/sec which wouldn't trigger zed to fault the drive.

Also, convert the checksum and IO delay thresholds to module params for
easy testing.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7252
2018-03-04 17:34:51 -08:00
Tom Caputi 095495e008 Raw DRR_OBJECT records must write raw data
b1d21733 made it possible for empty metadnode blocks to be
compressed to a hole, fixing a bug that would cause invalid
metadnode MACs when a send stream attempted to free objects
and allowing the blocks to be reclaimed when they were no
longer needed. However, this patch also introduced a race
condition; if a txg sync occurred after a DRR_OBJECT_RANGE
record was received but before any objects were added, the
metadnode block would be compressed to a hole and lose all
of its encryption parameters. This would cause subsequent
DRR_OBJECT records to fail when they attempted to write
their data into an unencrypted block. This patch defers the
DRR_OBJECT_RANGE handling to receive_object() so that the
encryption parameters are set with each object that is
written into that block.

Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7215 
Closes #7236
2018-02-27 09:04:05 -08:00
Tim Chase 8b5814393f Incorrect maximum DVA value in DDE_GET_NDVAS()
The conditional was reversed which caused garbage values to be used when
calculating dds_ref_dsize.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #7234
2018-02-26 14:20:12 -08:00
chrisrd e9a7729008 Fix free memory calculation on v3.14+
Provide infrastructure to auto-configure to enum and API changes in the
global page stats used for our free memory calculations.

arc_free_memory has been broken since an API change in Linux v3.14:

2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node
2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node
  vmstats

These commits moved some of global_page_state() into
global_node_page_state(). The API change was particularly egregious as,
instead of breaking the old code, it silently did the wrong thing and we
continued using global_page_state() where we should have been using
global_node_page_state(), thus indexing into the wrong array via
NR_SLAB_RECLAIMABLE et al.

There have been further API changes along the way:

2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to
  node counters
2017-09-06 v4.14 c41f012a mm: rename global_page_state to
  global_zone_page_state

...and various (incomplete, as it turns out) attempts to accomodate
these changes in ZoL:

2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats
2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc
2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc

The config infrastructure provided here resolves these issues going back
to the original API change in v3.14 and is robust against further Linux
changes in this area.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #7170
2018-02-23 08:50:06 -08:00
Olaf Faaland 7088545d01 Report duration and error in mmp_history entries
After an MMP write completes, update the relevant mmp_history entry
with the time between submission and completion, and the error
status of the write.

[faaland1@toss3a zfs]$ cat /proc/spl/kstat/zfs/pool/multihost
39 0 0x01 100 8800 69147946270893 72723903122926
id       txg     timestamp  error  duration   mmp_delay    vdev_guid
10607    1166    1518985089 0      138301     637785455    4882...
10608    1166    1518985089 0      136154     635407747    1151...
10609    1166    1518985089 0      803618560  633048078    9740...
10610    1166    1518985090 0      144826     633048078    4882...
10611    1166    1518985090 0      164527     666187671    1151...

Where duration = gethrtime_in_done_fn - gethrtime_at_submission, and
error = zio->io_error.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7190
2018-02-22 15:34:34 -08:00
Tony Hutter a5369b61a2 Linux 4.16 compat: use correct *_dec_and_test()
Use refcount_dec_and_test() on 4.16+ kernels, atomic_dec_and_test()
on older kernels.  https://lwn.net/Articles/714974/

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #7179 
Closes: #7211
2018-02-22 09:02:06 -08:00
DeHackEd 2b5cd5990f Fix multiple evaluations of VERIFY() and ASSERT() on failures
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes #684 
Closes #685
2018-02-21 14:54:26 -08:00
LOLi faa97c1619 Want 'zfs send -b'
This change implements 'zfs send -b' which can be used to send only
received property values whether or not they are overridden by local
settings.

This can be very useful during "restore" operations from a backup pool
because it allows to send only the property values originally sent
from the backup source, even though they were later modified on the
destination either by a 'zfs set' operation, explicit 'zfs inherit' or
overridden during the receive process via 'zfs receive -o|-x'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7156
2018-02-21 12:32:06 -08:00
Tom Caputi b0918402dc Raw receive should change key atomically
Currently, raw zfs sends transfer the encrypted master keys and
objset_phys_t encryption parameters in the DRR_BEGIN payload of
each send file. Both of these are processed as soon as they are
read in dmu_recv_stream(), meaning that the new keys are set
before the new snapshot is received. In addition to the fact that
this changes the user's keys for the dataset earlier than they
might expect, the keys were never reset to what they originally
were in the event that the receive failed. This patch splits the
processing into objset handling and key handling, the later of
which is moved to dmu_recv_end() so that they key change can be
done atomically.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7200
2018-02-21 12:31:03 -08:00
Tom Caputi b1d217338a Raw receives must compress metadnode blocks
Currently, the DMU relies on ZIO layer compression to free LO
dnode blocks that no longer have objects in them. However,
raw receives disable all compression, meaning that these blocks
can never be freed. In addition to the obvious space concerns,
this could also cause incremental raw receives to fail to mount
since the MAC of a hole is different from that of a completely
zeroed block.

This patch corrects this issue by adding a special case in
zio_write_compress() which will attempt to compress these blocks
to a hole even if ZIO_FLAG_RAW_ENCRYPT is set. This patch also
removes the zfs_mdcomp_disable tunable, since tuning it could
cause these same issues.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7198
2018-02-21 12:28:52 -08:00
Tom Caputi 163a8c28dd ZIL claiming should not start user accounting
Currently, ZIL claiming dirties objsets which causes
dsl_pool_sync() to attempt to perform user accounting on
them. This causes problems for encrypted datasets that were
raw received before the system went offline since they
cannot perform user accounting until they have their keys
loaded. This triggers an ASSERT in zio_encrypt(). Since
encryption was added, the code now depends on the fact that
data should only be written when objsets are owned. This
patch adds a check in dmu_objset_do_userquota_updates()
to ensure that useraccounting is only done when the objsets
are actually owned for write. As part of this work, the
zfsvfs and zvol code was updated so that it no longer lies
about owning objsets readonly.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6916 
Closes #7163
2018-02-20 16:27:31 -08:00
Don Brady cbce581353 Fix coverity defects: zfs channel programs
CID 173243, 173245:  Memory - corruptions  (OVERRUN)
 Added size argument to lcompat_sprintf() to avoid use of INT_MAX

CID 173244:  Integer handling issues  (OVERFLOW_BEFORE_WIDEN)
 Added cast to uint64_t to avoid a 32 bit overflow warning

CID 173242:  Integer handling issues  (CONSTANT_EXPRESSION_RESULT)
 Conditionally removed unused luai_numisnan() floating point check

CID 173241:  Resource leaks  (RESOURCE_LEAK)
 Added missing close(fd) on error path

CID 173240:    (UNINIT)
Fixed uninitialized variable in get_special_prop()

CID 147560:  Null pointer dereferences  (NULL_RETURNS)
Cleaned up bad code merge in dsl_dataset_promote_check()

CID 28475:  Memory - illegal accesses  (OVERRUN)
Fixed lcompat_sprintf() to use a size paramater

CID 28418, 28422:  Error handling issues  (CHECKED_RETURN)
Added function result cast to (void) to avoid warning

CID 23935, 28411, 28412:  Memory - corruptions  (ARRAY_VS_SINGLETON)
Added casts to avoid exposing result as an array

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7181
2018-02-20 11:19:42 -08:00
George Wilson ddc751d56b OpenZFS 8857 - zio_remove_child() panic due to already destroyed parent zio
PROBLEM
=======
It's possible for a parent zio to complete even though it has children
which have not completed. This can result in the following panic:
    > $C
    ffffff01809128c0 vpanic()
    ffffff01809128e0 mutex_panic+0x58(fffffffffb94c904, ffffff597dde7f80)
    ffffff0180912950 mutex_vector_enter+0x347(ffffff597dde7f80)
    ffffff01809129b0 zio_remove_child+0x50(ffffff597dde7c58, ffffff32bd901ac0,
    ffffff3373370908)
    ffffff0180912a40 zio_done+0x390(ffffff32bd901ac0)
    ffffff0180912a70 zio_execute+0x78(ffffff32bd901ac0)
    ffffff0180912b30 taskq_thread+0x2d0(ffffff33bae44140)
    ffffff0180912b40 thread_start+8()
    > ::status
    debugging crash dump vmcore.2 (64-bit) from batfs0390
    operating system: 5.11 joyent_20170911T171900Z (i86pc)
    image uuid: (not set)
    panic message: mutex_enter: bad mutex, lp=ffffff597dde7f80
    owner=ffffff3c59b39480 thread=ffffff0180912c40
    dump content: kernel pages only
The problem is that dbuf_prefetch along with l2arc can create a zio tree
which confuses the parent zio and allows it to complete with while children
still exist. Here's the scenario:
    zio tree:
        pio
         |--- lio
The parent zio, pio, has entered the zio_done stage and begins to check its
children to see there are still some that have not completed. In zio_done(),
the children are checked in the following order:
    zio_wait_for_children(zio, ZIO_CHILD_VDEV, ZIO_WAIT_DONE)
    zio_wait_for_children(zio, ZIO_CHILD_GANG, ZIO_WAIT_DONE)
    zio_wait_for_children(zio, ZIO_CHILD_DDT, ZIO_WAIT_DONE)
    zio_wait_for_children(zio, ZIO_CHILD_LOGICAL, ZIO_WAIT_DONE)
If pio, finds any child which has not completed then it stops executing and
goes to sleep. Each call to zio_wait_for_children() will grab the io_lock
while checking the particular child.
In this scenario, the pio has completed the first call to
zio_wait_for_children() to check for any ZIO_CHILD_VDEV children. Since
the only zio in the zio tree right now is the logical zio, lio, then it
completes that call and prepares to check the next child type.
In the meantime, the lio completes and in its callback creates a child vdev
zio, cio. The zio tree looks like this:
    zio tree:
        pio
         |--- lio
         |--- cio
The lio then grabs the parent's io_lock and removes itself.
    zio tree:
        pio
         |--- cio
The pio continues to run but has already completed its check for ZIO_CHILD_VDEV
and will erroneously complete. When the child zio, cio, completes it will panic
the system trying to reference the parent zio which has been destroyed.
SOLUTION
========
The fix is to rework the zio_wait_for_children() logic to accept a bitfield
for all the children types that it's interested in checking. The
io_lock will is held the entire time we check all the children types. Since
the function now accepts a bitfield, a simple ZIO_CHILD_BIT() macro is provided
to allow for the conversion between a ZIO_CHILD type and the bitfield used by
the zio_wiat_for_children logic.

Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Youzhong Yang <youzhong@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8857
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/862ff6d99c
Issue #5918
Closes #7168
2018-02-14 15:30:09 -08:00
Nasf-Fan 9c5167d19f Project Quota on ZFS
Project quota is a new ZFS system space/object usage accounting
and enforcement mechanism. Similar as user/group quota, project
quota is another dimension of system quota. It bases on the new
object attribute - project ID.

Project ID is a numerical value to indicate to which project an
object belongs. An object only can belong to one project though
you (the object owner or privileged user) can change the object
project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly.
The object also can inherit the project ID from its parent when
created if the parent has the project inherit flag (that can be
set via 'chattr +P' or 'zfs project -s [-p]').

By accounting the spaces/objects belong to the same project, we
can know how many spaces/objects used by the project. And if we
set the upper limit then we can control the spaces/objects that
are consumed by such project. It is useful when multiple groups
and users cooperate for the same project, or a user/group needs
to participate in multiple projects.

Support the following commands and functionalities:

zfs set projectquota@project
zfs set projectobjquota@project

zfs get projectquota@project
zfs get projectobjquota@project
zfs get projectused@project
zfs get projectobjused@project

zfs projectspace

zfs allow projectquota
zfs allow projectobjquota
zfs allow projectused
zfs allow projectobjused

zfs unallow projectquota
zfs unallow projectobjquota
zfs unallow projectused
zfs unallow projectobjused

chattr +/-P
chattr -p project_id
lsattr -p

This patch also supports tree quota based on the project quota via
"zfs project" commands set as following:
zfs project [-d|-r] <file|directory ...>
zfs project -C [-k] [-r] <file|directory ...>
zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
zfs project [-p id] [-r] [-s] <file|directory ...>

For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on
the $DIR, then the proejct [obj]quota and [obj]used values for the
$DIR's project ID will be shown as the total/free (avail) resource.
Keep the same behavior as EXT4/XFS does.

Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by  Ned Bass <bass6@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master"
Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c
Closes #6290
2018-02-13 14:54:54 -08:00
sanjeevbagewadi cc63068e95 Handle zap_add() failures in mixed case mode
With "casesensitivity=mixed", zap_add() could fail when the number of
files/directories with the same name (varying in case) exceed the
capacity of the leaf node of a Fatzap. This results in a ASSERT()
failure as zfs_link_create() does not expect zap_add() to fail. The fix
is to handle these failures and rollback the transactions.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Closes #7011 
Closes #7054
2018-02-09 10:15:53 -08:00
Brian Behlendorf f54976dc88 Linux 4.11 compat: avoid refcount_t name conflict
Related to commit 4859fe796, when directly using the kernel's
refcount functions in kernel compatibility code do not map
refcount_t to zfs_refcount_t.  This leads to a type mismatch.

Longer term we should consider renaming refcount_t to
zfs_refcount_t in the zfs code base.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7148
2018-02-08 21:25:51 -08:00
Brian Behlendorf 18f57327e0 Linux 4.16 compat: inode_set_iversion()
A new interface was added to manipulate the version field of an
inode.  Add a inode_set_iversion() wrapper for older kernels and
use the new interface when available.

The i_version field was dropped from the trace point due to the
switch to an atomic64_t i_version type.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7148
2018-02-08 21:25:19 -08:00
Serapheim Dimitropoulos 5b72a38d68 OpenZFS 8677 - Open-Context Channel Programs
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

We want to be able to run channel programs outside of synching
context. This would greatly improve performance for channel programs
that just gather information, as they won't have to wait for synching
context anymore.

=== What is implemented?

This feature introduces the following:
- A new command line flag in "zfs program" to specify our intention
  to run in open context. (The -n option)
- A new flag/option within the channel program ioctl which selects
  the context.
- Appropriate error handling whenever we try a channel program in
  open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.

=== How do we handle zfs.sync functions in open context?

When such a function is found by the interpreter and we are running
in open context we abort the script and we spit out a descriptive
runtime error. For example, given the script below ...

arg = ...
fs = arg["argv"][1]
err = zfs.sync.destroy(fs)
msg = "destroying " .. fs .. " err=" .. err
return msg

if we run it in open context, we will get back the following error:

Channel program execution failed:
[string "channel program"]:3: running functions from the zfs.sync
submodule requires passing sync=TRUE to lzc_channel_program()
(i.e. do not specify the "-n" command line argument)
stack traceback:
            [C]: in function 'destroy'
            [string "channel program"]:3: in main chunk

=== What about testing?

We've introduced new wrappers for all channel program tests that
run each channel program as both (startard & open-context) and
expect the appropriate behavior depending on the program using
the zfs.sync module.

OpenZFS-issue: https://www.illumos.org/issues/8677
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15
Closes #6558
2018-02-08 16:05:57 -08:00
Serapheim Dimitropoulos 8d103d8856 OpenZFS 8604 - Simplify snapshots unmounting code
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

Every time we want to unmount a snapshot (happens during snapshot
deletion or renaming) we unnecessarily iterate through all the
mountpoints in the VFS layer (see zfs_get_vfs).

The current patch completely gets rid of that code and changes
the approach while keeping the behavior of that code path the
same. Specifically, it puts a hold on the dataset/snapshot and
gets its vfs resource reference directly, instead of linearly
searching for it. If that reference exists we attempt to amount
it.

With the above change, it became obvious that the nvlist
manipulations that we do (add_boolean and add_nvlist) take a
significant amount of time ensuring uniqueness of every new
element even though they don't have too. Thus, we updated the
patch so those nvlists are not trying to enforce the uniqueness
of their elements.

A more complete analysis of the problem solved by this patch
can be found below:
https://sdimitro.github.io/post/snap-unmount-perf/

OpenZFS-issue: https://www.illumos.org/issues/8604
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/126118fb
2018-02-08 15:29:44 -08:00
Chris Williamson 234c91c508 OpenZFS 8600 - ZFS channel programs - snapshot
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this entails extra
logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.

OpenZFS-issue: https://www.illumos.org/issues/8600
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68089b8b
2018-02-08 15:29:24 -08:00
Brad Lewis af07368986 OpenZFS 8592 - ZFS channel programs - rollback
Authored by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

ZFS channel programs should be able to perform a rollback.

OpenZFS-issue: https://www.illumos.org/issues/8592
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d46b5ed6
2018-02-08 15:29:14 -08:00
Chris Williamson d99a015343 OpenZFS 7431 - ZFS Channel Programs
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533

Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
  Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
2018-02-08 15:28:18 -08:00
Brian Behlendorf 5461eefe50
Fix cstyle warnings
This patch contains no functional changes.  It is solely intended
to resolve cstyle warnings in order to facilitate moving the spl
source code in to the zfs repository.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #681
2018-02-07 11:49:38 -08:00
Tom Caputi 1b66810bad Change os->os_next_write_raw to work per txg
Currently, os_next_write_raw is a single boolean used for determining
whether or not the next call to dmu_objset_sync() should write out
the objset_phys_t as a raw buffer. Since the boolean is not associated
with a txg, the work simply happens during the next txg, which is not
necessarily the correct one. In the current implementation this issue
was misdiagnosed, resulting in a small hack in dmu_objset_sync() which
seemed to resolve the problem.

This patch changes os_next_write_raw to be an array of booleans, one
for each txg in TXG_OFF and removes the hack.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6864
2018-02-02 11:44:53 -08:00
Tom Caputi 047116ac76 Raw sends must be able to decrease nlevels
Currently, when a raw zfs send file includes a DRR_OBJECT record
that would decrease the number of levels of an existing object,
the object is reallocated with dmu_object_reclaim() which
creates the new dnode using the old object's nlevels. For non-raw
sends this doesn't really matter, but raw sends require that
nlevels on the receive side match that of the send side so that
the checksum-of-MAC tree can be properly maintained. This patch
corrects the issue by freeing the object completely before
allocating it again in this case.

This patch also corrects several issues with dnode_hold_impl()
and related functions that prevented dnodes (particularly
multi-slot dnodes) from being reallocated properly due to
the fact that existing dnodes were not being fully cleaned up
when they were freed.

This patch adds a test to make sure that zfs recv functions
properly with incremental streams containing dnodes of different
sizes.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6821
Closes #6864
2018-02-02 11:43:11 -08:00
Tom Caputi ae76f45cda Encryption Stability and On-Disk Format Fixes
The on-disk format for encrypted datasets protects not only
the encrypted and authenticated blocks themselves, but also
the order and interpretation of these blocks. In order to
make this work while maintaining the ability to do raw
sends, the indirect bps maintain a secure checksum of all
the MACs in the block below it along with a few other
fields that determine how the data is interpreted.

Unfortunately, the current on-disk format erroneously
includes some fields which are not portable and thus cannot
support raw sends. It is not possible to easily work around
this issue due to a separate and much smaller bug which
causes indirect blocks for encrypted dnodes to not be
compressed, which conflicts with the previous bug. In
addition, the current code generates incompatible on-disk
formats on big endian and little endian systems due to an
issue with how block pointers are authenticated. Finally,
raw send streams do not currently include dn_maxblkid when
sending both the metadnode and normal dnodes which are
needed in order to ensure that we are correctly maintaining
the portable objset MAC.

This patch zero's out the offending fields when computing
the bp MAC and ensures that these MACs are always
calculated in little endian order (regardless of the host
system's byte order). This patch also registers an errata
for the old on-disk format, which we detect by adding a
"version" field to newly created DSL Crypto Keys. We allow
datasets without a version (version 0) to only be mounted
for read so that they can easily be migrated. We also now
include dn_maxblkid in raw send streams to ensure the MAC
can be maintained correctly.

This patch also contains minor bug fixes and cleanups.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6845
Closes #6864
Closes #7052
2018-02-02 11:37:16 -08:00
Dr. András Korn 4c46b99d24 tx_waited -> tx_dirty_delayed in trace_dmu.h
This change was missed in 0735ecb334.

Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: András Korn <korn-github.com@elan.rulez.org>
Closes #7096
2018-01-31 16:13:26 -08:00
Prakash Surya 0735ecb334 OpenZFS 8997 - ztest assertion failure in zil_lwb_write_issue
PROBLEM
=======

When `dmu_tx_assign` is called from `zil_lwb_write_issue`, it's possible
for either `ERESTART` or `EIO` to be returned.

If `ERESTART` is returned, this will cause an assertion to fail directly
in `zil_lwb_write_issue`, where the code assumes the return value is
`EIO` if `dmu_tx_assign` returns a non-zero value. This can occur if the
SPA is suspended when `dmu_tx_assign` is called, and most often occurs
when running `zloop`.

If `EIO` is returned, this can cause assertions to fail elsewhere in the
ZIL code. For example, `zil_commit_waiter_timeout` contains the
following logic:

    lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb);
    ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED);

In this case, if `dmu_tx_assign` returned `EIO` from within
`zil_lwb_write_issue`, the `lwb` variable passed in will not be issued
to disk. Thus, it's `lwb_state` field will remain `LWB_STATE_OPENED` and
this assertion will fail. `zil_commit_waiter_timeout` assumes that after
it calls `zil_lwb_write_issue`, the `lwb` will be issued to disk, and
doesn't handle the case where this is not true; i.e. it doesn't handle
the case where `dmu_tx_assign` returns `EIO`.

SOLUTION
========

This change modifies the `dmu_tx_assign` function such that `txg_how` is
a bitmask, rather than of the `txg_how_t` enum type. Now, the previous
`TXG_WAITED` semantics can be used via `TXG_NOTHROTTLE`, along with
specifying either `TXG_NOWAIT` or `TXG_WAIT` semantics.

Previously, when `TXG_WAITED` was specified, `TXG_NOWAIT` semantics was
automatically invoked. This was not ideal when using `TXG_WAITED` within
`zil_lwb_write_issued`, leading the problem described above. Rather, we
want to achieve the semantics of `TXG_WAIT`, while also preventing the
`tx` from being penalized via the dirty delay throttling.

With this change, `zil_lwb_write_issued` can acheive the semtantics that
it requires by passing in the value `TXG_WAIT | TXG_NOTHROTTLE` to
`dmu_tx_assign`.

Further, consumers of `dmu_tx_assign` wishing to achieve the old
`TXG_WAITED` semantics can pass in the value `TXG_NOWAIT | TXG_NOTHROTTLE`.

Authored by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Additionally updated `zfs_tmpfile` to use `TXG_NOTHROTTLE`

OpenZFS-issue: https://www.illumos.org/issues/8997
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/19ea6cb0f9
Closes #7084
2018-01-26 20:19:46 -08:00
Brian Behlendorf 8fb1ede146 Extend deadman logic
The intent of this patch is extend the existing deadman code
such that it's flexible enough to be used by both ztest and
on production systems.  The proposed changes include:

* Added a new `zfs_deadman_failmode` module option which is
  used to dynamically control the behavior of the deadman.  It's
  loosely modeled after, but independant from, the pool failmode
  property.  It can be set to wait, continue, or panic.

    * wait     - Wait for the "hung" I/O (default)
    * continue - Attempt to recover from a "hung" I/O
    * panic    - Panic the system

* Added a new `zfs_deadman_ziotime_ms` module option which is
  analogous to `zfs_deadman_synctime_ms` except instead of
  applying to a pool TXG sync it applies to zio_wait().  A
  default value of 300s is used to define a "hung" zio.

* The ztest deadman thread has been re-enabled by default,
  aligned with the upstream OpenZFS code, and then extended
  to terminate the process when it takes significantly longer
  to complete than expected.

* The -G option was added to ztest to print the internal debug
  log when a fatal error is encountered.  This same option was
  previously added to zdb in commit fa603f82.  Update zloop.sh
  to unconditionally pass -G to obtain additional debugging.

* The FM_EREPORT_ZFS_DELAY event which was previously posted
  when the deadman detect a "hung" pool has been replaced by
  a new dedicated FM_EREPORT_ZFS_DEADMAN event.

* The proposed recovery logic attempts to restart a "hung"
  zio by calling zio_interrupt() on any outstanding leaf zios.
  We may want to further restrict this to zios in either the
  ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages.
  Calling zio_interrupt() is expected to only be useful for
  cases when an IO has been submitted to the physical device
  but for some reasonable the completion callback hasn't been
  called by the lower layers.  This shouldn't be possible but
  has been observed and may be caused by kernel/driver bugs.

* The 'zfs_deadman_synctime_ms' default value was reduced from
  1000s to 600s.

* Depending on how ztest fails there may be no cache file to
  move.  This should not be considered fatal, collect the logs
  which are available and carry on.

* Add deadman test cases for spa_deadman() and zio_wait().

* Increase default zfs_deadman_checktime_ms to 60s.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6999
2018-01-25 13:40:38 -08:00
Brian Behlendorf 23602fdb39
Add cv_timedwait_io()
Add missing helper function cv_timedwait_io(), it should be used
when waiting on IO with a specified timeout.

Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #674
2018-01-24 11:33:47 -08:00
Brian Behlendorf 31864e3d8c
OpenZFS 8652 - Tautological comparisons with ZPROP_INVAL
usr/src/uts/common/sys/fs/zfs.h
	Change ZPROP_INVAL and ZPROP_CONT from macros to enum values.  Clang
	and GCC both prefer to use unsigned ints to store enums.  That was
	causing tautological comparison warnings (and likely eliminating
	error handling code at compile time) whenever a zfs_prop_t or
	zpool_prop_t was compared to ZPROP_INVAL or ZPROP_CONT.  Making the
	error flags be explicity enum values forces the enum types to be
	signed.

	ZPROP_INVAL was also compared against two different enum types.  I
	had to change its name to ZPOOL_PROP_INVAL whenever its compared to
	a zpool_prop_t.  There are still some places where ZPROP_INVAL or
	ZPROP_CONT is compared to a plain int, in code that doesn't know
	whether the int is storing a zfs_prop_t or a zpool_prop_t.

usr/src/uts/common/fs/zfs/spa.c
	s/ZPROP_INVAL/ZPOOL_PROP_INVAL/

Authored by: Alan Somers <asomers@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8652
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c2de80dc74
Closes #7061
2018-01-19 09:22:37 -08:00
Sean Eric Fagan 43cb30b3ce OpenZFS 8959 - Add notifications when a scrub is paused or resumed
Authored by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
- Brought #defines in eventdefs.h in line with ZFS on Linux format.
- Updated zfs-events.5 with the new events.

OpenZFS-issue: https://www.illumos.org/issues/8959
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c862b93eea
Closes #7049
2018-01-17 10:31:00 -08:00
Brian Behlendorf e1a0850c35
Force ztest to always use /dev/urandom
For ztest, which is solely for testing, using a pseudo random
is entirely reasonable.  Using /dev/urandom ensures the system
entropy pool doesn't get depleted thus stalling the testing.
This is a particular problem when testing in VMs.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7017 
Closes #7036
2018-01-12 09:36:26 -08:00
Nathaniel Wesley Filardo cba6fc61a2 Revert raidz_map and _col structure types
As part of the refactoring of ab9f4b0b82,
several uint64_t-s and uint8_t-s were changed to other types.  This
caused ZoL github issue #6981, an overflow of a size_t on a 32-bit ARM
machine.  In absense of any strong motivation for the type changes, this
simply puts them back, modulo the changes accumulated for ABD.

Compile-tested on amd64 and run-tested on armhf.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu>
Closes #6981 
Closes #7023
2018-01-09 14:46:52 -08:00
Brian Behlendorf 0873bb6337
Fix ARC hit rate
When the compressed ARC feature was added in commit d3c2ae1
the method of reference counting in the ARC was modified.  As
part of this accounting change the arc_buf_add_ref() function
was removed entirely.

This would have be fine but the arc_buf_add_ref() function
served a second undocumented purpose of updating the ARC access
information when taking a hold on a dbuf.  Without this logic
in place a cached dbuf would not migrate its associated
arc_buf_hdr_t to the MFU list.  This would negatively impact
the ARC hit rate, particularly on systems with a small ARC.

This change reinstates the missing call to arc_access() from
dbuf_hold() by implementing a new arc_buf_access() function.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6171 
Closes #6852 
Closes #6989
2018-01-08 09:52:36 -08:00
Prakash Surya 2fe61a7ecc OpenZFS 8909 - 8585 can cause a use-after-free kernel panic
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: John Kennedy <jwk404@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>

PROBLEM
=======

There's a race condition that exists if `zil_free_lwb` races with either
`zil_commit_waiter_timeout` and/or `zil_lwb_flush_vdevs_done`.

Here's an example panic due to this bug:

    > ::status
    debugging crash dump vmcore.0 (64-bit) from ip-10-110-205-40
    operating system: 5.11 dlpx-5.2.2.0_2017-12-04-17-28-32b6ba51fb (i86pc)
    image uuid: 4af0edfb-e58e-6ed8-cafc-d3e9167c7513
    panic message:
    BAD TRAP: type=e (#pf Page fault) rp=ffffff0010555970 addr=60 occurred in module "zfs" due to a NULL pointer dereference
    dump content: kernel pages only

    > $c
    zio_shrink+0x12()
    zil_lwb_write_issue+0x30d(ffffff03dcd15cc0, ffffff03e0730e20)
    zil_commit_waiter_timeout+0xa2(ffffff03dcd15cc0, ffffff03d97ffcf8)
    zil_commit_waiter+0xf3(ffffff03dcd15cc0, ffffff03d97ffcf8)
    zil_commit+0x80(ffffff03dcd15cc0, 9a9)
    zfs_write+0xc34(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
    fop_write+0x5b(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
    write+0x250(42, fffffd7ff4832000, 2000)
    sys_syscall+0x177()

If there's an outstanding lwb that's in `zil_commit_waiter_timeout`
waiting to timeout, waiting on it's waiter's CV, we must be sure not to
call `zil_free_lwb`. If we end up calling `zil_free_lwb`, then that LWB
may be freed and can result in a use-after-free situation where the
stale lwb pointer stored in the `zil_commit_waiter_t` structure of the
thread waiting on the waiter's CV is used.

A similar situation can occur if an lwb is issued to disk, and thus in
the `LWB_STATE_ISSUED` state, and `zil_free_lwb` is called while the
disk is servicing that lwb. In this situation, the lwb will be freed by
`zil_free_lwb`, which will result in a use-after-free situation when the
lwb's zio completes, and `zil_lwb_flush_vdevs_done` is called.

This race condition is prevented in `zil_close` by calling `zil_commit`
before `zil_free_lwb` is called, which will ensure all outstanding (i.e.
all lwb's in the `LWB_STATE_OPEN` and/or `LWB_STATE_ISSUED` states)
reach the `LWB_STATE_DONE` state before the lwb's are freed
(`zil_commit` will not return untill all the lwb's are
`LWB_STATE_DONE`).

Further, this race condition is prevented in `zil_sync` by only calling
`zil_free_lwb` for lwb's that do not have their `lwb_buf` pointer set.
All lwb's not in the `LWB_STATE_DONE` state will have a non-null value
for this pointer; the pointer is only cleared in
`zil_lwb_flush_vdevs_done`, at which point the lwb's state will be
changed to `LWB_STATE_DONE`.

This race *is* present in `zil_suspend`, leading to this bug.

At first glance, it would appear as though this would not be true
because `zil_suspend` will call `zil_commit`, just like `zil_close`, but
the problem is that `zil_suspend` will set the zilog's `zl_suspend`
field prior to calling `zil_commit`. Further, in `zil_commit`, if
`zl_suspend` is set, `zil_commit` will take a special branch of logic
and use `txg_wait_synced` instead of performing the normal `zil_commit`
logic.

This call to `txg_wait_synced` might be good enough for the data to
reach disk safely before it returns, but it does not ensure that all
outstanding lwb's reach the `LWB_STATE_DONE` state before it returns.
This is because, if there's an lwb "stuck" in
`zil_commit_waiter_timeout`, waiting for it's lwb to timeout, it will
maintain a non-null value for it's `lwb_buf` field and thus `zil_sync`
will not free that lwb. Thus, even though the lwb's data is already on
disk, the lwb will be left lingering, waiting on the CV, and will
eventually timeout and be issued to disk even though the write is
unnecessary.

So, after `zil_commit` is called from `zil_suspend`, we incorrectly
assume that there are not outstanding lwb's, and proceed to free all
lwb's found on the zilog's lwb list. As a result, we free the lwb that
will later be used `zil_commit_waiter_timeout`.

SOLUTION
========

The solution to this, is to ensure all outstanding lwb's complete before
calling `zil_free_lwb` via `zil_destroy` in `zil_suspend`. This patch
accomplishes this goal by forcing the normal `zil_commit` logic when
called from `zil_sync`.

Now, `zil_suspend` will call `zil_commit_impl` which will always use the
normal logic of waiting/issuing lwb's to disk before it returns. As a
result, any lwb's outstanding when `zil_commit_impl` is called will be
guaranteed to reach the `LWB_STATE_DONE` state by the time it returns.

Further, no new lwb's will be created via `zil_commit` since the zilog's
`zl_suspend` flag will be set. This will force all new callers of
`zil_commit` to use `txg_wait_synced` instead of creating and issuing
new lwb's.

Thus, all lwb's left on the zilog's lwb list when `zil_destroy` is
called will be in the `LWB_STATE_DONE` state, and we'll avoid this race
condition.

OpenZFS-issue: https://www.illumos.org/issues/8909
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ece62b6f8d
Closes #6940
2017-12-28 10:18:04 -08:00
lidongyang 823d48bfb1 Call commit callbacks from the tail of the list
Our zfs backed Lustre MDT had soft lockups while under heavy metadata
workloads while handling transaction callbacks from osd_zfs.

The problem is zfs is not taking advantage of the fast path in
Lustre's trans callback handling, where Lustre will skip the calls
to ptlrpc_commit_replies() when it already saw a higher transaction
number.

This patch corrects this, it also has a positive impact on metadata
performance on Lustre with osd_zfs, plus some cleanup in the headers.

A similar issue for ext4/ldiskfs is described on:
https://jira.hpdd.intel.com/browse/LU-6527

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Closes #6986
2017-12-22 10:19:51 -08:00
Tom Caputi a8b2e30685 Support re-prioritizing asynchronous prefetches
When sequential scrubs were merged, all calls to arc_read()
(including prefetch IOs) were given ZIO_PRIORITY_ASYNC_READ.
Unfortunately, this behaves badly with an existing issue where
prefetch IOs cannot be re-prioritized after the issue. The
result is that synchronous reads end up in the same vdev_queue
as the scrub IOs and can have (in some workloads) multiple
seconds of latency.

This patch incorporates 2 changes. The first ensures that all
scrub IOs are given ZIO_PRIORITY_SCRUB to allow the vdev_queue
code to differentiate between these I/Os and user prefetches.
Second, this patch introduces zio_change_priority() to provide
the missing capability to upgrade a zio's priority.

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6921 
Closes #6926
2017-12-21 09:13:06 -08:00
Brian Behlendorf c28a67733c
Suppress incorrect objtool warnings
Suppress incorrect warnings from versions of objtool which are not
aware of x86 EVEX prefix instructions used for AVX512.

  module/zfs/vdev_raidz_math_avx512bw.o: warning:
  objtool: <func+offset>: can't find jump dest instruction at .text

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6928
2017-12-07 10:28:50 -08:00
Prakash Surya 1b2b0acab5 OpenZFS 8603 - rename zilog's "zl_writer_lock" to "zl_issuer_lock"
This is a purely cosmetic change. The zilog's "zl_writer_lock" field is
being renamed to "zl_issuer_lock" to try and make the code easier to
understand; no other changes are made.

Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: C Fraire <cfraire@me.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8603
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2daf06546b
Closes #6927
2017-12-06 11:38:10 -08:00
Prakash Surya 1ce23dcaff OpenZFS 8585 - improve batching done in zil_commit()
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>

Problem
=======

The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:

 1. When there's outstanding ZIL blocks being written (i.e. there's
    already a "writer thread" in progress), then any new calls to
    zil_commit() will block waiting for the currently oustanding ZIL
    blocks to complete. The blocks written for each "writer thread" is
    coined a "batch", and there can only ever be a single "batch" being
    written at a time. When a batch is being written, any new ZIL
    transactions will have to wait for the next batch to be written,
    which won't occur until the current batch finishes.

    As a result, the underlying storage may not be used as efficiently
    as possible. While "new" threads enter zil_commit() and are blocked
    waiting for the next batch, it's possible that the underlying
    storage isn't fully utilized by the current batch of ZIL blocks. In
    that case, it'd be better to allow these new threads to generate
    (and issue) a new ZIL block, such that it could be serviced by the
    underlying storage concurrently with the other ZIL blocks that are
    being serviced.

 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
    to complete, prior to zil_commit() returning. The size of any given
    batch is proportional to the number of ZIL transaction in the queue
    at the time that the batch starts processing the queue; which
    doesn't occur until the previous batch completes. Thus, if there's a
    lot of transactions in the queue, the batch could be composed of
    many ZIL blocks, and each call to zil_commit() will have to wait for
    all of these writes to complete (even if the thread calling
    zil_commit() only cared about one of the transactions in the batch).

To further complicate the situation, these two issues result in the
following side effect:

 3. If a given batch takes longer to complete than normal, this results
    in larger batch sizes, which then take longer to complete and
    further drive up the latency of zil_commit(). This can occur for a
    number of reasons, including (but not limited to): transient changes
    in the workload, and storage latency irregularites.

Solution
========

The solution attempted by this change has the following goals:

 1. no on-disk changes; maintain current on-disk format.
 2. modify the "batch size" to be equal to the "ZIL block size".
 3. allow new batches to be generated and issued to disk, while there's
    already batches being serviced by the disk.
 4. allow zil_commit() to wait for as few ZIL blocks as possible.
 5. use as few ZIL blocks as possible, for the same amount of ZIL
    transactions, without introducing significant latency to any
    individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks.

In theory, with these goals met, the new allgorithm will allow the
following improvements:

 1. new ZIL blocks can be generated and issued, while there's already
    oustanding ZIL blocks being serviced by the storage.
 2. the latency of zil_commit() should be proportional to the underlying
    storage latency, rather than the incoming synchronous workload.

Porting Notes
=============

Due to the changes made in commit 119a394ab0, the lifetime of an itx
structure differs than in OpenZFS. Specifically, the itx structure is
kept around until the data associated with the itx is considered to be
safe on disk; this is so that the itx's callback can be called after the
data is committed to stable storage. Since OpenZFS doesn't have this itx
callback mechanism, it's able to destroy the itx structure immediately
after the itx is committed to an lwb (before the lwb is written to
disk).

To support this difference, and to ensure the itx's callbacks can still
be called after the itx's data is on disk, a few changes had to be made:

  * A list of itxs was added to the lwb structure. This list contains
    all of the itxs that have been committed to the lwb, such that the
    callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(),
    after the data for the itxs is committed to disk.

  * A list of itxs was added on the stack of the zil_process_commit_list()
    function; the "nolwb_itxs" list. In some circumstances, an itx may
    not be committed to an lwb (e.g. if allocating the "next" ZIL block
    on disk fails), so this list is used to keep track of which itxs
    fall into this state, such that their callbacks can be called after
    the ZIL's writer pipeline is "stalled".

  * The logic to actually call the itx's callback was moved into the
    zil_itx_destroy() function. Since all consumers of zil_itx_destroy()
    were effectively performing the same logic (i.e. if callback is
    non-null, call the callback), it seemed like useful code cleanup to
    consolidate this logic into a single function.

Additionally, the existing Linux tracepoint infrastructure dealing with
the ZIL's probes and structures had to be updated to reflect these code
changes. Specifically:

  * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be
    removed from "trace_zil.h" as well.

  * Some of the zilog structure's fields were removed, which affected
    the tracepoint definitions of the structure.

  * New tracepoints had to be added for the following 3 new probes:
      * zil__process__commit__itx
      * zil__process__normal__itx
      * zil__commit__io__error

OpenZFS-issue: https://www.illumos.org/issues/8585
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a
Closes #6566
2017-12-05 09:39:16 -08:00
Brian Behlendorf 72841b9fd9
Preserve itx alloc size for zio_data_buf_free()
Using zio_data_buf_alloc() to allocate the itx's may be unsafe
because the itx->itx_lr.lrc_reclen field is not constant from
allocation to free.  Using a different itx->itx_lr.lrc_reclen
size in zio_data_buf_free() can result in the allocation being
returned to the wrong kmem cache.

This issue can be avoided entirely by storing the allocation size
in itx->itx_size and using that for zio_data_buf_free().

Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6912
2017-12-04 11:44:39 -08:00
Tom Caputi d4677269f2 Unbreak the scan status ABI
When d4a72f23 was merged, pss_pass_issued was incorrectly
added to the middle of the pool_scan_stat_t structure
instead of the end. This patch simply corrects this issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6909
2017-11-30 09:40:13 -08:00
Tom Caputi d4a72f2386 Sequential scrub and resilvers
Currently, scrubs and resilvers can take an extremely
long time to complete. This is largely due to the fact
that zfs scans process pools in logical order, as
determined by each block's bookmark. This makes sense
from a simplicity perspective, but blocks in zfs are
often scattered randomly across disks, particularly
due to zfs's copy-on-write mechanisms.

This patch improves performance by splitting scrubs
and resilvers into a metadata scanning phase and an IO
issuing phase. The metadata scan reads through the
structure of the pool and gathers an in-memory queue
of I/Os, sorted by size and offset on disk. The issuing
phase will then issue the scrub I/Os as sequentially as
possible, greatly improving performance.

This patch also updates and cleans up some of the scan
code which has not been updated in several years.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Authored-by: Alek Pinchuk <apinchuk@datto.com>
Authored-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #3625 
Closes #6256
2017-11-15 17:27:01 -08:00
Brian Behlendorf ed19bccfb6
Linux 4.14 compat: vfs_read & vfs_write
The kernel_read & kernel_write functions have always wrapped the
vfs_read & vfs_write functions respectively.  However, they could
not be used by vn_rdwr() since the offset wasn't passed as a
pointer.  This prevented us from being able to properly update
the file offset.

Linux 4.14 unexported vfs_read & vfs_write but also changed the
signature of kernel_read & kernel_write to provide the needed
functionality.  Use these updated functions when available.

Reviewed-by: Pritam Baral <pritam@pritambaral.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #656 
Closes #667
2017-11-15 17:19:23 -08:00
benrubson 7c351e31d5 OpenZFS 7531 - Assign correct flags to prefetched buffers
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Authored by: abraunegg <alex.braunegg@gmail.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7531
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/468008cb
2017-11-11 20:24:34 -08:00
Don Brady 1c27024e22 Undo c89 workarounds to match with upstream
With PR 5756 the zfs module now supports c99 and the
remaining past c89 workarounds can be undone.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #6816
2017-11-04 13:25:13 -07:00
Jason King f3c8c9e6f0 OpenZFS 640 - number_to_scaled_string is duplicated in several commands
Porting Notes:
- The OpenZFS patch added nicenum_scale() and nicenum() to a
  library not used by ZFS.  Rather than pull in a new dependency
  the version of nicenum in lib/libzpool/util.c was simply
  replaced with the new one.

Reviewed by: Sebastian Wiedenroth <wiedi@frubar.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Authored by: Jason King <jason.brian.king@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/640
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0a055120
Closes #6796
2017-10-30 14:47:20 -07:00
Brian Behlendorf 8be3688999
Remove vn_rename and vn_remove
Both vn_rename and vn_remove have been historically problematic
to implement reliably.  Rather than fixing them yet again they
are being removed.

Reviewed-by: Arkadiusz Bubala <arkadiusz.bubala@open-e.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #648 
Closes #661
2017-10-27 15:49:14 -07:00
Brian Behlendorf 867959b588
OpenZFS 8081 - Compiler warnings in zdb
Fix compiler warnings in zdb.  With these changes, FreeBSD can compile
zdb with all compiler warnings enabled save -Wunused-parameter.

usr/src/cmd/zdb/zdb.c
usr/src/cmd/zdb/zdb_il.c
usr/src/uts/common/fs/zfs/sys/sa.h
usr/src/uts/common/fs/zfs/sys/spa.h
	Fix numerous warnings, including:
	* const-correctness
	* shadowing global definitions
	* signed vs unsigned comparisons
	* missing prototypes, or missing static declarations
	* unused variables and functions
	* Unreadable array initializations
	* Missing struct initializers

usr/src/cmd/zdb/zdb.h
	Add a header file to declare common symbols

usr/src/lib/libzpool/common/sys/zfs_context.h
usr/src/uts/common/fs/zfs/arc.c
usr/src/uts/common/fs/zfs/dbuf.c
usr/src/uts/common/fs/zfs/spa.c
usr/src/uts/common/fs/zfs/txg.c
	Add a function prototype for zk_thread_create, and ensure that every
	callback supplied to this function actually matches the prototype.

usr/src/cmd/ztest/ztest.c
usr/src/uts/common/fs/zfs/sys/zil.h
usr/src/uts/common/fs/zfs/zfs_replay.c
usr/src/uts/common/fs/zfs/zvol.c
	Add a function prototype for zil_replay_func_t, and ensure that
	every function of this type actually matches the prototype.

usr/src/uts/common/fs/zfs/sys/refcount.h
	Change FTAG so it discards any constness of __func__, necessary
	since existing APIs expect it passed as void *.

Porting Notes:
- Many of these fixes have already been applied to Linux.  For
  consistency the OpenZFS version of a change was applied if the
  warning was addressed in an equivalent but different fashion.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Authored by: Alan Somers <asomers@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8081
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a
Closes #6787
2017-10-27 12:46:35 -07:00
Brian Behlendorf a032ac4b38 OpenZFS 8558, 8602 - lwp_create() returns EAGAIN
8558 lwp_create() returns EAGAIN on system with more than 80K ZFS filesystems

On a system with more than 80K ZFS filesystems, we've seen cases
where lwp_create() will start to fail by returning EAGAIN. The
problem being, for each of those 80K ZFS filesystems, a taskq will
be created for each dataset as part of the ZIL for each dataset.

Porting Notes:
- The new nomem taskq kstat was dropped.
- Added module options and documentation for new tunings
  zfs_zil_clean_taskq_nthr_pct, zfs_zil_clean_taskq_minalloc,
  zfs_zil_clean_taskq_maxalloc, and zfs_sync_taskq_batch_pct.

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8558
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/216d772

8602 remove unused "dp_early_sync_tasks" field from "dsl_pool" structure

Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8602
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2bcb545
Closes #6779
2017-10-26 12:57:53 -07:00
Arkadiusz Bubała d3f2cd7e3b Added no_scrub_restart flag to zpool reopen
Added -n flag to zpool reopen that allows a running scrub
operation to continue if there is a device with Dirty Time Log.

By default if a component device has a DTL and zpool reopen
is executed all running scan operations will be restarted.

Added functional tests for `zpool reopen`

Tests covers following scenarios:
* `zpool reopen` without arguments,
* `zpool reopen` with pool name as argument,
* `zpool reopen` while scrubbing,
* `zpool reopen -n` while scrubbing,
* `zpool reopen -n` while resilvering,
* `zpool reopen` with bad arguments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes #6076 
Closes #6746
2017-10-26 12:26:09 -07:00
Brian Behlendorf d5e024cba2 Emit history events for 'zpool create'
History commands and events were being suppressed for the
'zpool create' command since the history object did not
yet exist.  Create the object earlier so this history
doesn't get lost.

Split the pool_destroy event in to pool_destroy and
pool_export so they may be distinguished.

Updated events_001_pos and events_002_pos test cases.  They
now check for the expected history events and were reworked
to be more reliable.

Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6712 
Closes #6486
2017-10-23 09:45:59 -07:00
John 6044cf59cd Add convenience 'zfs_get' functions
Add get functions to match existing ones.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Ramsden <johnramsden@riseup.net>
Closes #6308
2017-10-19 11:18:42 -07:00
Brian Behlendorf 21a932b83c Post-Encryption Followup
This PR includes fixes for bugs and documentation issues found 
after the encryption patch was merged and general code improvements 
for long-term maintainability.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #6526
Closes #6639
Closes #6703
Cloese #6706
Closes #6714
Closes #6595
2017-10-13 10:02:39 -07:00
Damian Wojsław cdc15a7604 Typo in dsl_dataset.h
The parameters dsl_dataset_t *os in function prototype should be
renamed to dsl_dataset_t *ds.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Damian Wojsław <damian@wojslaw.pl>
Closes #6756 
Closes #6273
2017-10-12 17:10:38 -07:00
Tom Caputi 440a3eb939 Fixes for #6639
Several issues were uncovered by running stress tests with zfs
encryption and raw sends in particular. The issues and their
associated fixes are as follows:

* arc_read_done() has the ability to chain several requests for
  the same block of data via the arc_callback_t struct. In these
  cases, the ARC would only use the first request's dsobj from
  the bookmark to decrypt the data. This is problematic because
  the first request might be a prefetch zio which is able to
  handle the key not being loaded, while the second might use a
  different key that it is sure will work. The fix here is to
  pass the dsobj with each individual arc_callback_t so that each
  request can attempt to decrypt the data separately.

* DRR_FREE and DRR_FREEOBJECT records in a send file were not
  having their transactions properly tagged as raw during raw
  sends, which caused a panic when the dbuf code attempted to
  decrypt these blocks.

* traverse_prefetch_metadata() did not properly set
  ZIO_FLAG_SPECULATIVE when issuing prefetch IOs.

* Added a few asserts and code cleanups to ensure these issues
  are more detectable in the future.

Signed-off-by: Tom Caputi <tcaputi@datto.com>
2017-10-11 16:55:50 -04:00
Tom Caputi 4807c0badb Encryption patch follow-up
* PBKDF2 implementation changed to OpenSSL implementation.

* HKDF implementation moved to its own file and tests
  added to ensure correctness.

* Removed libzfs's now unnecessary dependency on libzpool
  and libicp.

* Ztest can now create and test encrypted datasets. This is
  currently disabled until issue #6526 is resolved, but
  otherwise functions as advertised.

* Several small bug fixes discovered after enabling ztest
  to run on encrypted datasets.

* Fixed coverity defects added by the encryption patch.

* Updated man pages for encrypted send / receive behavior.

* Fixed a bug where encrypted datasets could receive
  DRR_WRITE_EMBEDDED records.

* Minor code cleanups / consolidation.

Signed-off-by: Tom Caputi <tcaputi@datto.com>
2017-10-11 16:54:48 -04:00
Fabian Grünbichler 48fbb9ddbf Free objects when receiving full stream as clone
All objects after the last written or freed object are not supposed to
exist after receiving the stream.  Free them accordingly, as if a
freeobjects record for them had been included in the stream.

Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes #5699
Closes #6507
Closes #6616
2017-10-10 15:30:51 -07:00
Brian Behlendorf 0cefc9dbcd Add parenthesis to btop and ptob macros
Add missing parenthesis around btop and ptob macros to ensure
operation ordering is preserved after expansion.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #660
2017-10-10 08:59:17 -07:00
Olaf Faaland ce319db57b Make include/linux/ conform to ZFS style standard
No semantic changes.

Fix the following types of style issues:
	blank after preprocessor #
	#define followed by space instead of tab
	improper first line of block comment
	indent by spaces instead of tabs
	last line in file is blank
	missing blank after open comment
	missing space before left brace
	non-continuation indented 4 spaces
	spaces instead of tabs
	unparenthesized return expression

Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
2017-10-09 14:27:27 -07:00
Olaf Faaland 4b393c50ae Make file headers conform to ZFS style standard
No semantic changes.

Change
 /************\
and
 \************/

to

 /*
and
  */

Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
2017-10-09 14:27:27 -07:00
Brian Behlendorf c11f1004d1 Remove dead code from AVL tree
The avl_update_* functions are never used by ZFS and are therefore
being removed.  They're barely even used in Illumos.  Additionally,
simplify avl_add() by using a VERIFY which produces exactly the same
behavior under Linux.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6716
2017-10-05 19:28:00 -07:00
chrisrd e71cade67d Scale the dbuf cache with arc_c
Commit d3c2ae1 introduced a dbuf cache with a default size of the
minimum of 100M or 1/32 maximum ARC size. (These figures may be adjusted
using dbuf_cache_max_bytes and dbuf_cache_max_shift.) The dbuf cache
is counted as metadata for the purposes of ARC size calculations.

On a 1GB box the ARC maximum size defaults to c_max 493M which gives a
dbuf cache default minimum size of 15.4M, and the ARC metadata defaults
to minimum 16M. I.e. the dbuf cache is an significant proportion of the
minimum metadata size. With other overheads involved this actually means
the ARC metadata doesn't get down to the minimum.

This patch dynamically scales the dbuf cache to the target ARC size
instead of statically scaling it to the maximum ARC size. (The scale is
still set by dbuf_cache_max_shift and the maximum size is still fixed by
dbuf_cache_max_bytes.) Using the target ARC size rather than the current
ARC size is done to help the ARC reach the target rather than simply
focusing on the current size.

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #6506 
Closes #6561
2017-09-29 15:49:19 -07:00
Giuseppe Di Natale 34d00e7aba Correct cppcheck errors
ZFS buildbot STYLE builder was moved to Ubuntu 17.04
which has a newer version of cppcheck. Handle the
new cppcheck errors.

uu_* functions removed in this commit were unused
and effectively dead code. They are now retired.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6653
2017-09-19 12:17:29 -07:00
David Quigley a9a2bf7152 Remove FRU and LIBTOPO Support
FRU and LIBTOPO support are illumos only features that will not be ported to
Linux and make the code more complicated than necessary. This commit
makes way for further cleanups of the zed/FMA code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #6641
2017-09-18 17:06:40 -07:00
Giuseppe Di Natale 787acae0b5 Linux 3.14 compat: IO acct, global_page_state, etc
generic_start_io_acct/generic_end_io_acct in the master
branch of the linux kernel requires that the request_queue
be provided.

Move the logic from freemem in the spl to arc_free_memory
in arc.c. Do this so we can take advantage of global_page_state
interface checks in zfs.

Upstream kernel replaced struct block_device with
struct gendisk in struct bio. Determine if the
function bio_set_dev exists during configure
and have zfs use that if it exists.

bio_set_dev https://github.com/torvalds/linux/commit/74d4699
global_node_page_state https://github.com/torvalds/linux/commit/75ef718
io acct https://github.com/torvalds/linux/commit/d62e26b

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6635
2017-09-16 11:00:19 -07:00
LOLi 835db58592 Add -vnP support to 'zfs send' for bookmarks
This leverages the functionality introduced in cf7684b to expose
verbose, dry-run and parsable 'zfs send' options for bookmarks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3666 
Closes #6601
2017-09-08 15:24:31 -07:00
Olaf Faaland 4c5b89f59e Improved dnode allocation and dmu_hold_impl()
Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the
code, fix errors introduced by commit dbeb879 (PR #6117) interacting
badly with large dnodes, and improve performance.

* When allocating a new dnode in dmu_object_alloc_dnsize(), update the
percpu object ID for the core's metadnode chunk immediately.  This
eliminates most lock contention when taking the hold and creating the
dnode.

* Correct detection of the chunk boundary to work properly with large
dnodes.

* Separate the dmu_hold_impl() code for the FREE case from the code for
the ALLOCATED case to make it easier to read.

* Fully populate the dnode handle array immediately after reading a
block of the metadnode from disk.  Subsequently the dnode handle array
provides enough information to determine which dnode slots are in use
and which are free.

* Add several kstats to allow the behavior of the code to be examined.

* Verify dnode packing in large_dnode_008_pos.ksh.  Since the test is
purely creates, it should leave very few holes in the metadnode.

* Add test large_dnode_009_pos.ksh, which performs concurrent creates
and deletes, to complement existing test which does only creates.

With the above fixes, there is very little contention in a test of about
200,000 racing dnode allocations produced by tests 'large_dnode_008_pos'
and 'large_dnode_009_pos'.

name                            type data
dnode_hold_dbuf_hold            4    0
dnode_hold_dbuf_read            4    0
dnode_hold_alloc_hits           4    3804690
dnode_hold_alloc_misses         4    216
dnode_hold_alloc_interior       4    3
dnode_hold_alloc_lock_retry     4    0
dnode_hold_alloc_lock_misses    4    0
dnode_hold_alloc_type_none      4    0
dnode_hold_free_hits            4    203105
dnode_hold_free_misses          4    4
dnode_hold_free_lock_misses     4    0
dnode_hold_free_lock_retry      4    0
dnode_hold_free_overflow        4    0
dnode_hold_free_refcount        4    57
dnode_hold_free_txg             4    0
dnode_allocate                  4    203154
dnode_reallocate                4    0
dnode_buf_evict                 4    23918
dnode_alloc_next_chunk          4    4887
dnode_alloc_race                4    0
dnode_alloc_next_block          4    18

The performance is slightly improved for concurrent creates with
16+ threads, and unchanged for low thread counts.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5396 
Closes #6522 
Closes #6414 
Closes #6564
2017-09-05 16:15:04 -07:00
Matthew Ahrens 1e0457e7f5 Enhance comments for large dnode project
Fix a few nits in the comments from large dnodes. Also import
some of the commit message as a comment in the code, making
it more accessible.

Reviewed-by: @rottegift 
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matt Ahrens <mahrens@delphix.com>
Closes #6551
2017-08-29 09:00:28 -07:00
Tom Caputi 9b8407638d Send / Recv Fixes following b52563
This patch fixes several issues discovered after
the encryption patch was merged:

* Fixed a bug where encrypted datasets could attempt
  to receive embedded data records.

* Fixed a bug where dirty records created by the recv
  code wasn't properly setting the dr_raw flag.

* Fixed a typo where a dmu_tx_commit() was changed to
  dmu_tx_abort()

* Fixed a few error handling bugs unrelated to the
  encryption patch in dmu_recv_stream()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6512 
Closes #6524 
Closes #6545
2017-08-23 16:54:24 -07:00
Gvozden Neskovic 551905dd47 vdev_mirror: kstat observables for preferred vdev
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #6461
2017-08-21 10:05:54 -07:00
Gvozden Neskovic d6c6590c5d vdev_mirror: load balancing fixes
vdev_queue:
- Track the last position of each vdev, including the io size,
  in order to detect linear access of the following zio.
- Remove duplicate `vq_lastoffset`

vdev_mirror:
- Correctly calculate the zio offset (signedness issue)
- Deprecate `vdev_queue_register_lastoffset()`
- Add `VDEV_LABEL_START_SIZE` to zio offset of leaf vdevs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #6461
2017-08-21 10:05:16 -07:00
Brian Behlendorf c8f9061fc7 Retire legacy test infrastructure
* Removed zpios kmod, utility, headers and man page.

* Removed unused scripts zpios-profile/*, zpios-test/*,
  zpool-config/*, smb.sh, zpios-sanity.sh, zpios-survey.sh,
  zpios.sh, and zpool-create.sh.

* Removed zfs-script-config.sh.in.  When building 'make' generates
  a common.sh with in-tree path information from the common.sh.in
  template.  This file and sourced by the test scripts and used
  for in-tree testing, it is not included in the packages.  When
  building packages 'make install' uses the same template to
  create a new common.sh which is appropriate for the packaging.

* Removed unused functions/variables from scripts/common.sh.in.
  Only minimal path information and configuration environment
  variables remain.

* Removed unused scripts from scripts/ directory.

* Remaining shell scripts in the scripts directory updated to
  cleanly pass shellcheck and added to checked scripts.

* Renamed tests/test-runner/cmd/ to tests/test-runner/bin/ to
  match install location name.

* Removed last traces of the --enable-debug-dmu-tx configure
  options which was retired some time ago.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6509
2017-08-15 17:26:38 -07:00
Don Brady d977122da9 Add corruption failure option to zinject(8)
Added a 'corrupt' error option that will flip a bit in the data
after a read operation.  This is useful for generating checksum
errors at the device layer (in a mirror config for example). It
is also used to validate the diagnosis of checksum errors from
the zfs diagnosis engine.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6345
2017-08-14 15:17:15 -07:00
Tom Caputi b525630342 Native Encryption for ZFS on Linux
This change incorporates three major pieces:

The first change is a keystore that manages wrapping
and encryption keys for encrypted datasets. These
commands mostly involve manipulating the new
DSL Crypto Key ZAP Objects that live in the MOS. Each
encrypted dataset has its own DSL Crypto Key that is
protected with a user's key. This level of indirection
allows users to change their keys without re-encrypting
their entire datasets. The change implements the new
subcommands "zfs load-key", "zfs unload-key" and
"zfs change-key" which allow the user to manage their
encryption keys and settings. In addition, several new
flags and properties have been added to allow dataset
creation and to make mounting and unmounting more
convenient.

The second piece of this patch provides the ability to
encrypt, decyrpt, and authenticate protected datasets.
Each object set maintains a Merkel tree of Message
Authentication Codes that protect the lower layers,
similarly to how checksums are maintained. This part
impacts the zio layer, which handles the actual
encryption and generation of MACs, as well as the ARC
and DMU, which need to be able to handle encrypted
buffers and protected data.

The last addition is the ability to do raw, encrypted
sends and receives. The idea here is to send raw
encrypted and compressed data and receive it exactly
as is on a backup system. This means that the dataset
on the receiving system is protected using the same
user key that is in use on the sending side. By doing
so, datasets can be efficiently backed up to an
untrusted system without fear of data being
compromised.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #494 
Closes #5769
2017-08-14 10:36:48 -07:00
gaurkuma 9df9692637 Allow longer SPA names in stats
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes #641
2017-08-11 08:53:35 -07:00
Brian Behlendorf c25b8f99f8 Simplify threads, mutexs, cvs and rwlocks
* Simplify threads, mutexs, cvs and rwlocks

* Update the zk_thread_create() function to use the same trick
  as Illumos.  Specifically, cast the new pthread_t to a void
  pointer and return that as the kthread_t *.  This avoids the
  issues associated with managing a wrapper structure and is
  safe as long as the callers never attempt to dereference it.

* Update all function prototypes passed to pthread_create() to
  match the expected prototype.  We were getting away this with
  before since the function were explicitly cast.

* Replaced direct zk_thread_create() calls with thread_create()
  for code consistency.  All consumers of libzpool now use the
  proper wrappers.

* The mutex_held() calls were converted to MUTEX_HELD().

* Removed all mutex_owner() calls and retired the interface.
  Instead use MUTEX_HELD() which provides the same information
  and allows the implementation details to be hidden.  In this
  case the use of the pthread_equals() function.

* The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had
  any non essential fields removed.  In the case of kthread_t
  and kcondvar_t they could be directly typedef'd to pthread_t
  and pthread_cond_t respectively.

* Removed all extra ASSERTS from the thread, mutex, rwlock, and
  cv wrapper functions.  In practice, pthreads already provides
  the vast majority of checks as long as we check the return
  code.  Removing this code from our wrappers help readability.

* Added TS_JOINABLE state flag to pass to request a joinable rather
  than detached thread.  This isn't a standard thread_create() state
  but it's the least invasive way to pass this information and is
  only used by ztest.

TEST_ZTEST_TIMEOUT=3600

Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4547 
Closes #5503 
Closes #5523 
Closes #6377 
Closes #6495
2017-08-11 08:51:44 -07:00
Brian Behlendorf 46364cb2f3 Add libtpool (thread pools)
OpenZFS provides a library called tpool which implements thread
pools for user space applications.  Porting this library means
the zpool utility no longer needs to borrow the kernel mutex and
taskq interfaces from libzpool.  This code was updated to use
the tpool library which behaves in a very similar fashion.

Porting libtpool was relatively straight forward and minimal
modifications were needed.  The core changes were:

* Fully convert the library to use pthreads.
* Updated signal handling.
* lmalloc/lfree converted to calloc/free
* Implemented portable pthread_attr_clone() function.

Finally, update the build system such that libzpool.so is no
longer linked in to zfs(8), zpool(8), etc.  All that is required
is libzfs to which the zcommon soures were added (which is the way
it always should have been).  Removing the libzpool dependency
resulted in several build issues which needed to be resolved.

* Moved zfeature support to module/zcommon/zfeature_common.c
* Moved ratelimiting to to module/zfs/zfs_ratelimit.c
* Moved get_system_hostid() to lib/libspl/gethostid.c
* Removed use of cmn_err() in zcommon source
* Removed dprintf_setup() call from zpool_main.c and zfs_main.c
* Removed highbit() and lowbit()
* Removed unnecessary library dependencies from Makefiles
* Removed fletcher-4 kstat in user space
* Added sha2 support explicitly to libzfs
* Added highbit64() and lowbit64() to zpool_util.c

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6442
2017-08-09 15:31:08 -07:00
gaurkuma 520faf5ddc Crash in dbuf_evict_one with DTRACE_PROBE
Update the dbuf__evict__one() tracepoint so that it can safely
handle a NULL dmu_buf_impl_t pointer.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>    
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes #6463
2017-08-09 11:04:41 -07:00