Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>a
Ported by: Boris Protopopov <bprotopopov@actifio.com>
Signed-off-by: Boris Protopopov <bprotopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6513
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8df0bcf0
If a ZFS object contains a hole at level one, and then a data block is
created at level 0 underneath that l1 block, l0 holes will be created.
However, these l0 holes do not have the birth time property set; as a
result, incremental sends will not send those holes.
Fix is to modify the dbuf_read code to fill in birth time data.
The commit f74b821 caused a regression where creating file through NFS will
always create a file owned by root. This is because the patch enables the KSID
code in zfs_acl_ids_create, which it would use euid and egid of the current
process. However, on Linux, we should use fsuid and fsgid for file operations,
which is the original behaviour. So we revert this part of code.
The patch also enables secpolicy_vnode_*, since they are also used in file
operations, we change them to use fsuid and fsgid.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4772Closes#4758
This is a new implementation of RAIDZ1/2/3 routines using x86_64
scalar, SSE, and AVX2 instruction sets. Included are 3 parity
generation routines (P, PQ, and PQR) and 7 reconstruction routines,
for all RAIDZ level. On module load, a quick benchmark of supported
routines will select the fastest for each operation and they will
be used at runtime. Original implementation is still present and
can be selected via module parameter.
Patch contains:
- specialized gen/rec routines for all RAIDZ levels,
- new scalar raidz implementation (unrolled),
- two x86_64 SIMD implementations (SSE and AVX2 instructions sets),
- fastest routines selected on module load (benchmark).
- cmd/raidz_test - verify and benchmark all implementations
- added raidz_test to the ZFS Test Suite
New zfs module parameters:
- zfs_vdev_raidz_impl (str): selects the implementation to use. On
module load, the parameter will only accept first 3 options, and
the other implementations can be set once module is finished
loading. Possible values for this option are:
"fastest" - use the fastest math available
"original" - use the original raidz code
"scalar" - new scalar impl
"sse" - new SSE impl if available
"avx2" - new AVX2 impl if available
See contents of `/sys/module/zfs/parameters/zfs_vdev_raidz_impl` to
get the list of supported values. If an implementation is not supported
on the system, it will not be shown. Currently selected option is
enclosed in `[]`.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4328
As of 4.6, the icache and dcache LRUs are memcg aware insofar as the
kernel's per-superblock shrinker is concerned. The effect is that dcache
or icache entries added by a task in a non-root memcg won't be scanned
by the shrinker in the context of the root (or NULL) memcg. This defeats
the attempts by zfs_sb_prune() to unpin buffers and can allow metadata to
grow uncontrollably. This patch reverts to the d_prune_aliaes() method
in case the kernel's per-superblock shrinker is not able to free anything.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes: #4726
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands. In addition, non-
privileged users should be able to run all of the following commands:
* zpool [list | iostat | status | get]
* zfs [list | get]
Historically this functionality was not available on Linux. In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability. Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.
Even with this change some limitations remain. Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace). This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code. It
may be possible to add this functionality in the future.
This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite. These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.
Two minor bug fixes were required for test-running.py. First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it. Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.
Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#362Closes#434Closes#4100Closes#4394Closes#4410Closes#4487
New functionality:
- Preserves existing scalar implementation.
- Adds AVX2 optimized Fletcher-4 computation.
- Fastest routines selected on module load (benchmark).
- Test case for Fletcher-4 added to ztest.
New zcommon module parameters:
- zfs_fletcher_4_impl (str): selects the implementation to use.
"fastest" - use the fastest version available
"cycle" - cycle trough all available impl for ztest
"scalar" - use the original version
"avx2" - new AVX2 implementation if available
Performance comparison (Intel i7 CPU, 1MB data buffers):
- Scalar: 4216 MB/s
- AVX2: 14499 MB/s
See contents of `/sys/module/zcommon/parameters/zfs_fletcher_4_impl`
to get list of supported values. If an implementation is not supported
on the system, it will not be shown. Currently selected option is
enclosed in `[]`.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4330
Async writes triggered by a self-healing IO may be issued before the
pool finishes the process of initialization. This results in a NULL
dereference of `spa->spa_dsl_pool` in vdev_queue_max_async_writes().
George Wilson recommended addressing this issue by initializing the
passed `dsl_pool_t **` prior to dmu_objset_open_impl(). Since the
caller is passing the `spa->spa_dsl_pool` this has the effect of
ensuring it's initialized.
However, since this depends on the caller knowing they must pass
the `spa->spa_dsl_pool` an additional NULL check was added to
vdev_queue_max_async_writes(). This guards against any future
restructuring of the code which might result in dsl_pool_init()
being called differently.
Signed-off-by: GeLiXin <47034221@qq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4652
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6531
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130
Porting notes:
- Added new IO delay tracepoints, and moved common ZIO tracepoint macros
to a new trace_common.h file.
- Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function.
- Updated zinject man page
- Updated zpool_scrub test files
arc_prune_task uses a refcount to protect arc_prune_t, but it doesn't prevent
the underlying zsb from disappearing if there's a concurrent umount. We fix
this by force the caller of arc_remove_prune_callback to wait for
arc_prune_taskq to finish.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4687Closes#4690
Skip ctldir in zfs_rezget, otherwise they will always get invalidated. This
will cause funny behaviour for the mounted snapdirs. Especially for
Linux >= 3.18, d_invalidate will detach the mountpoint and prevent anyone
automount it again as long as someone is still using the detached mount.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4514Closes#4661Closes#4672
Register iterate_shared if it exists so the kernel will used shared
lock and allowing concurrent readdir.
Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE
to allow concurrent seeking.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4664Closes#4665
This field is a duplicate of the inode->i_generation, so just
kill it.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4538Closes#4654
This reverts commit 8302528617 and
ebecfcd699 which broke the build.
While these patches do apply cleanly and passed previous test
runs they need to be updated to account for the changes made in
commit 241b541574.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
Fixed bug introduced in commit #c35b1882. Hinted by gcc:
zio_inject.c: In function ‘zio_handle_io_delay’:
zio_inject.c:382:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (handler->zi_record.zi_freq != 0 &&
^~
zio_inject.c:384:4: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
continue;
^~~~~~~~
Signed-off-by: Marcel Huber <marcelhuberfoo@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4632
struct zvol_state contains a dummy znode, which is around 1KB on x64,
only for zfs_range_lock. But in reality, other than z_range_lock and
z_range_avl, zfs_range_lock only need znode on regular file, which
means we add 1KB on a structure and gain nothing.
In this patch, we remove the dummy znode for zvol_state. In order to
do that, we also need to refactor zfs_range_lock a bit. We move
z_range_lock and z_range_avl pair out of znode_t to form zfs_rlock_t.
This new struct replaces znode_t as the main handle inside the range
lock functions.
We also add pointers to z_size, z_blksz, and z_max_blksz so range lock
code doesn't depend on znode_t. This allows non-ZPL consumers like
Lustre to use the range locks with their equivalent znode_t structure.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4510
The was originally using interruptible cv_timedwait_sig, but was changed
to uninterruptible cv_timedwait_hires in ae6d0c6. Use _sig_hires instead
to allow interruptible sleep.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4633Closes#4634
6093 zfsctl_shares_lookup should only VN_RELE() on zfs_zget() success
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6093
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0f92170Closes#4630
This function was always implemented slightly differently under Linux
and therefore never suffered from this issue. The patch has been
updated and applied as cleanup in order to minimize differences with
the upstream OpenZFS code.
This reverts commit 4cd77889b6. The
i_generation field in the inode is 32-bit and the SA code expects
64-bit fixed values. Revert this optimization for now until
this is cleanly addressed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4538
The receive_writer_arg and receive_arg structures become large
when ZFS is compiled with debugging enabled. This results in
gcc throwing an error about excessive stack usage:
module/zfs/dmu_send.c: In function ‘dmu_recv_stream’:
module/zfs/dmu_send.c:2502:1: error: the frame size of 1256 bytes is
larger than 1024 bytes [-Werror=frame-larger-than=]
Fix this by allocating those functions on the heap, rather than
on the stack.
With patch: dmu_send.c:2350:1:dmu_recv_stream 240 static
Without patch: dmu_send.c:2350:1:dmu_recv_stream 1336 static
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4620
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Denys Rtveliashvili <denys@rtveliashvili.name>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
An initial version of this patch was applied in commit 29572cc and
subsequently refined upstream. Since the implementations do not
conflict with each other both are left applied for now.
OpenZFS-issue: https://www.illumos.org/issues/6842
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/02525cdCloses#4615
Commit e0ab3ab introduced two blocks of code which are only needed
when debugging is enabled. These blocks should be wrapped with
ZFS_DEBUG for clarity and to prevent unused variable warnings in
a production build.
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4515
6286 ZFS internal error when set large block on bootfs
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6286
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6de9bb5Closes#4585
6736 ZFS per-vdev ZAPs
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/6736https://github.com/openzfs/openzfs/commit/215198a
Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4515
This field is a duplicate of the inode->i_generation, so just kill it
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4538
At the very least, the zfs_secpolicy_write_perms ioctl security policy
callback, which calls dsl_dataset_hold(), can require freeing memory and,
therefore, re-enter ZFS. This patch enables PF_FSTRANS for all of the
security policy callbacks similarly to the manner in which it's enabled
for the actual ioctl callback.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4554
These files get generated when CONFIG_DEBUG_INFO_DWARF4 is enabled in
Linux .config.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4580
6844 dnode_next_offset can detect fictional holes
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
dnode_next_offset is used in a variety of places to iterate over the
holes or allocated blocks in a dnode. It operates under the premise that
it can iterate over the blockpointers of a dnode in open context while
holding only the dn_struct_rwlock as reader. Unfortunately, this premise
does not hold.
When we create the zio for a dbuf, we pass in the actual block pointer
in the indirect block above that dbuf. When we later zero the bp in
zio_write_compress, we are directly modifying the bp. The state of the
bp is now inconsistent from the perspective of dnode_next_offset: the bp
will appear to be a hole until zio_dva_allocate finally finishes filling
it in. In the meantime, dnode_next_offset can detect a hole in the dnode
when none exists.
I was able to experimentally demonstrate this behavior with the
following setup:
1. Create a file with 1 million dbufs.
2. Create a thread that randomly dirties L2 blocks by writing to the
first L0 block under them.
3. Observe dnode_next_offset, waiting for it to skip over a hole in the
middle of a file.
4. Do dnode_next_offset in a loop until we skip over such a non-existent
hole.
The fix is to ensure that it is valid to iterate over the indirect
blocks in a dnode while holding the dn_struct_rwlock by passing the zio
a copy of the BP and updating the actual BP in dbuf_write_ready while
holding the lock.
References:
https://www.illumos.org/issues/6844https://github.com/openzfs/openzfs/pull/82
DLPX-35372
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4548
6659 nvlist_free(NULL) is a no-op
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Marcel Telka <marcel@telka.sk>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6659https://github.com/illumos/illumos-gate/commit/aab83bb
Ported-by: David Quigley <dpquigl@davequigley.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4566
When ZFS partitions a block device it must wait for udev to create
both a device node and all the device symlinks. This process takes
a variable length of time and depends on factors such how many links
must be created, the complexity of the rules, etc. Complicating
the situation further it is not uncommon for udev to create and
then remove a link multiple times while processing the udev rules.
Given the above, the existing scheme of waiting for an expected
partition to appear by name isn't 100% reliable. At this point
udev may still remove and recreate think link resulting in the
kernel modules being unable to open the device.
In order to address this the zpool_label_disk_wait() function
has been updated to use libudev. Until the registered system
device acknowledges that it in fully initialized the function
will wait. Once fully initialized all device links are checked
and allowed to settle for 50ms. This makes it far more likely
that all the device nodes will exist when the kernel modules
need to open them.
For systems without libudev an alternate zpool_label_disk_wait()
was updated to include a settle time. In addition, the kernel
modules were updated to include retry logic for this ENOENT case.
Due to the improved checks in the utilities it is unlikely this
logic will be invoked. However, if the rare event it is needed
it will prevent a failure.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#4523Closes#3708Closes#4077Closes#4144Closes#4214Closes#4517
Linux 4.5 added member "name" to xattr_handler. xattr_handler which matches to
whole name rather than prefix should use "name" instead of "prefix".
Otherwise, kernel will return with EINVAL when it tries to resolve handlers.
Also, we remove the strcmp checks when xattr_handler has name, because
xattr_resolve_name will do the check for us.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4549Closes#4537
In order to remove the HAVE_PN_UTILS wrappers the pn_alloc() and
pn_free() functions must be implemented. The existing illumos
implementation were used for this purpose.
The `flags` argument which was used in places wrapped by the
HAVE_PN_UTILS condition has beed added back to zfs_remove() and
zfs_link() functions. This removes a small point of divergence
between the ZoL code and upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4522
Commit 4967a3e introduced a typo that caused the ZPL to store the
intended default ACL as an access ACL. Due to caching this problem
may not become visible until the filesystem is remounted or the inode
is evicted from the cache. Fix the typo and add a regression test.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4520
Commit d1d7e2689d ("cstyle: Resolve C style issues") inverted
the logic on the none elevator comparison. Fix this and make it
cstyle warning clean.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4507
Linux 4.0 introduces lazytime. The idea is that when we update the atime, we
delay writing it to disk for as long as it is reasonably possible.
When lazytime is enabled, dirty_inode will be called with only I_DIRTY_TIME
flag whenever i_atime is updated. So under such condition, we will set
z_atime_dirty. We will only write it to disk if file is closed, inode is
evicted or setattr is called. Ideally, we should also write it whenever SA
is going to be updated, but it is left for future improvement.
There's one thing that we should take care of now that we allow i_atime to be
dirty. In original implementation, whenever SA is modified, zfs_inode_update
will be called to overwrite every thing in inode. This will cause dirty
i_atime to be discarded. We fix this by don't overwrite i_atime in
zfs_inode_update. We only overwrite i_atime when allocating new inode or doing
zfs_rezget with zfs_inode_update_new.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
The problem for atime:
We have 3 places for atime: inode->i_atime, znode->z_atime and SA. And its
handling is a mess. A huge part of mess regarding atime comes from
zfs_tstamp_update_setup, zfs_inode_update, and zfs_getattr, which behave
inconsistently with those three values.
zfs_tstamp_update_setup clears z_atime_dirty unconditionally as long as you
don't pass ATTR_ATIME. Which means every write(2) operation which only updates
ctime and mtime will cause atime changes to not be written to disk.
Also zfs_inode_update from write(2) will replace inode->i_atime with what's
inside SA(stale). But doesn't touch z_atime. So after read(2) and write(2).
You'll have i_atime(stale), z_atime(new), SA(stale) and z_atime_dirty=0.
Now, if you do stat(2), zfs_getattr will actually replace i_atime with what's
inside, z_atime. So you will have now you'll have i_atime(new), z_atime(new),
SA(stale) and z_atime_dirty=0. These will all gone after umount. And you'll
leave with a stale atime.
The problem for relatime:
We do have a relatime config inside ZFS dataset, but how it should interact
with the mount flag MS_RELATIME is not well defined. It seems it wanted
relatime mount option to override the dataset config by showing it as
temporary in `zfs get`. But at the same time, `zfs set relatime=on|off` would
also seems to want to override the mount option. Not to mention that
MS_RELATIME flag is actually never passed into ZFS, so it never really worked.
How Linux handles atime:
The Linux kernel actually handles atime completely in VFS, except for writing
it to disk. So if we remove the atime handling in ZFS, things would just work,
no matter it's strictatime, relatime, noatime, or even O_NOATIME. And whenever
VFS updates the i_atime, it will notify the underlying filesystem via
sb->dirty_inode().
And also there's one thing to note about atime flags like MS_RELATIME and
other flags like MS_NODEV, etc. They are mount point flags rather than
filesystem(sb) flags. Since native linux filesystem can be mounted at multiple
places at the same time, they can all have different atime settings. So these
flags are never passed down to filesystem drivers.
What this patch tries to do:
We remove znode->z_atime, since we won't gain anything from it. We remove most
of the atime handling and leave it to VFS. The only thing we do with atime is
to write it when dirty_inode() or setattr() is called. We also add
file_accessed() in zpl_read() since it's not provided in vfs_read().
After this patch, only the MS_RELATIME flag will have effect. The setting in
dataset won't do anything. We will make zfstuil to mount ZFS with MS_RELATIME
set according to the setting in dataset in future patch.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
As described in torvalds/linux@4a2d057e the macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were originally introduced
to make it possible to add bigger chunks to the page cache. This
never panned out and it has therefore been removed from the kernel.
ZFS has been updated to use the PAGE_{SIZE,SHIFT,MASK,ALIGN} macros
and calls to page_cache_release() have been replaced with put_page().
There was no need to introduce a configure check for this because
these interfaces have existed for a very long time.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4489
We need 32 bit userspace FS_IOC32_GETFLAGS and FS_IOC32_SETFLAGS
compat ioctls for systems such as powerpc64. We use the normal
compat ioctl idiom as used by a variety of file systems to provide
this support.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4477
When debugging is enabled on a very recent version of gcc
(tested with 5.3.0), DVA_SET_GANG(dva, !!(flags)) fails
because an assertion causes a comparison between what is
technically a boolean and an integer.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4465
The zpool_scrub_002, zpool_scrub_003, zpool_scrub_004 test cases fail
reliably when running against small pools or fast storage. This
occurs because the scrub/resilver operation completes before subsequent
commands can be run.
A one second delay has been added to 10% of zio's in order to ensure
the scrub/resilver operation will run for at least several seconds.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4450
6681 zfs list burning lots of time in dodefault() via dsl_prop_*
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
References:
https://www.illumos.org/issues/6681https://github.com/illumos/illumos-gate/commit/d09e447
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4406
6370 ZFS send fails to transmit some holes
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Stefan Ring <stefanrin@gmail.com>
Reviewed by: Steven Burgess <sburgess@datto.com>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6370https://github.com/illumos/illumos-gate/commit/286ef71
In certain circumstances, "zfs send -i" (incremental send) can produce
a stream which will result in incorrect sparse file contents on the
target.
The problem manifests as regions of the received file that should be
sparse (and read a zero-filled) actually contain data from a file that
was deleted (and which happened to share this file's object ID).
Note: this can happen only with filesystems (not zvols, because they do
not free (and thus can not reuse) object IDs).
Note: This can happen only if, since the incremental source (FromSnap),
a file was deleted and then another file was created, and the new file
is sparse (i.e. has areas that were never written to and should be
implicitly zero-filled).
We suspect that this was introduced by 4370 (applies only if hole_birth
feature is enabled), and made worse by 5243 (applies if hole_birth
feature is disabled, and we never send any holes).
The bug is caused by the hole birth feature. When an object is deleted
and replaced, all the holes in the object have birth time zero. However,
zfs send cannot tell that the holes are new since the file was replaced,
so it doesn't send them in an incremental. As a result, you can end up
with invalid data when you receive incremental send streams. As a
short-term fix, we can always send holes with birth time 0 (unless it's
a zvol or a dataset where we can guarantee that no objects have been
reused).
Ported-by: Steven Burgess <sburgess@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4369Closes#4050
zfsonlinux issue #3681 - lock order inversion between zvol_open() and
dsl_pool_sync()...zvol_rename_minors()
Remove trylock of spa_namespace_lock as it is no longer needed when
zvol minor operations are performed in a separate context with no
prior locking state; the spa_namespace_lock is no longer held
when bdev->bd_mutex or zfs_state_lock might be taken in the code
paths originating from the zvol minor operation callbacks.
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3681
zfsonlinux issue #2217 - zvol minor operations: check snapdev
property before traversing snapshots of a dataset
zfsonlinux issue #3681 - lock order inversion between zvol_open()
and dsl_pool_sync()...zvol_rename_minors()
Create a per-pool zvol taskq for asynchronous zvol tasks.
There are a few key design decisions to be aware of.
* Each taskq must be single threaded to ensure tasks are always
processed in the order in which they were dispatched.
* There is a taskq per-pool in order to keep the pools independent.
This way if one pool is suspended it will not impact another.
* The preferred location to dispatch a zvol minor task is a sync
task. In this context there is easy access to the spa_t and
minimal error handling is required because the sync task must
succeed.
Support for asynchronous zvol minor operations address issue #3681.
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2217Closes#3678Closes#3681
Since they both evaluate to zero, this is a semi-cosmetic change
but the latter is the proper value to use as an argument to
taskq_dispatch_delay().
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4393
There is a race condition when new transaction group is added
to dp->dp_dirty_datasets list by the zap_update in the zvol_update_volsize.
Meanwhile, before these dirty data are synchronized, the receive process
can cause that dmu_recv_end_sync is executed. Then finally dirty data
are going to be synchronized but the synchronization ends with the NULL
pointer dereference error.
Signed-off-by: ab-oe <arkadiusz.bubala@open-e.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4116
The existing algorithm selects a preferred leaf vdev based on offset of the zio
request modulo the number of members in the mirror. It assumes the devices are
of equal performance and that spreading the requests randomly over both drives
will be sufficient to saturate them. In practice this results in the leaf vdevs
being under utilized.
The new algorithm takes into the following additional factors:
* Load of the vdevs (number outstanding I/O requests)
* The locality of last queued I/O vs the new I/O request.
Within the locality calculation additional knowledge about the underlying vdev
is considered such as; is the device backing the vdev a rotating media device.
This results in performance increases across the board as well as significant
increases for predominantly streaming loads and for configurations which don't
have evenly performing devices.
The following are results from a setup with 3 Way Mirror with 2 x HD's and
1 x SSD from a basic test running multiple parrallel dd's.
With pre-fetch disabled (vfs.zfs.prefetch_disable=1):
== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s
With pre-fetch enabled (vfs.zfs.prefetch_disable=0):
== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s
In addition to the performance changes the code was also restructured, with
the help of Justin Gibbs, to provide a more logical flow which also ensures
vdevs loads are only calculated from the set of valid candidates.
The following additional sysctls where added to allow the administrator
to tune the behaviour of the load algorithm:
* vfs.zfs.vdev.mirror.rotating_inc
* vfs.zfs.vdev.mirror.rotating_seek_inc
* vfs.zfs.vdev.mirror.rotating_seek_offset
* vfs.zfs.vdev.mirror.non_rotating_inc
* vfs.zfs.vdev.mirror.non_rotating_seek_inc
These changes where based on work started by the zfsonlinux developers:
https://github.com/zfsonlinux/zfs/pull/1487
Reviewed by: gibbs, mav, will
MFC after: 2 weeks
Sponsored by: Multiplay
References:
https://github.com/freebsd/freebsd@5c7a6f5dhttps://github.com/freebsd/freebsd@31b7f68dhttps://github.com/freebsd/freebsd@e186f564
Performance Testing:
https://github.com/zfsonlinux/zfs/pull/4334#issuecomment-189057141
Porting notes:
- The tunables were adjusted to have ZoL-style names.
- The code was modified to use ZoL's vd_nonrot.
- Fixes were done to make cstyle.pl happy
- Merge conflicts were handled manually
- freebsd/freebsd@e186f564bc by my
collegue Andriy Gapon has been included. It applied perfectly, but
added a cstyle regression.
- This replaces 556011dbec entirely.
- A typo "IO'a" has been corrected to say "IO's"
- Descriptions of new tunables were added to man/man5/zfs-module-parameters.5.
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4334
Set a limit for the largest compressed block which can be written
to an L2ARC device. By default this limit is set to 16M so there
is no change in behavior.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#4323
Close the race window in zvol_open() to prevent removal of
zvol_state in the 'first open' code path. Move the call to
check_disk_change() under zvol_state_lock to make sure the
zvol_media_changed() and zvol_revalidate_disk() called by
check_disk_change() are invoked with positive zv_open_count.
Skip opened zvols when removing minors and set private_data
to NULL for zvols that are not in use whose minors are being
removed, to indicate to zvol_open() that the state is gone.
Skip opened zvols when renaming minors to avoid modifying
zv_name that might be in use, e.g. in zvol_ioctl().
Drop zvol_state_lock before calling add_disk() when creating
minors to avoid deadlocks with zvol_open().
Wrap dmu_objset_find() with spl_fstran_mark()/unmark().
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4344
The difference between `dmu_read_uio()` and `dmu_read_uio_dbuf()` is
that the former takes a hold while the latter uses an existing hold.
`zfs_read()` in the ZPL will use `dmu_read_uio_dbuf()` while
our analogous `zvol_write()` will use `dmu_write_uio_dbuf()`, but for no
apparent reason, we inherited a `zvol_read()` function from
OpenSolaris that does `dmu_read_uio()`. illumos-gate also still
uses `dmu_read_uio()` to this day. Lets switch to `dmu_read_uio_dbuf()`,
which is more performant.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4316
In illumos-gate, `zvol_read` and `zvol_write` are both passed uio_t
rather than bio_t. Since we are translating from bio to uio for both, we
might as well unify the logic and have code more similar to its illumos
counterpart. At the same time, we can fix some regressions that occurred
versus the original code from illumos-gate.
We refactor zvol_write to take uio and also correct the
following problems:
1. We did `dnode_hold()` on each IO when we already had a hold.
2. We would attempt to send writes that exceeded `DMU_MAX_ACCESS` to the
DMU.
3. We could call `zil_commit()` twice. In this case, this is because
Linux uses the `->write` function to send flushes and can aggregate the
flush with a write. If a synchronous write occurred with the flush, we
effectively flushed twice when there is no need to do that.
zvol_read also suffers from the first two problems. Other platforms
suffer from the first, so we leave that for a second patch so that there
is a discrete patch for them to cherry-pick.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4316
When using large blocks like 1M, there will be more than UINT16_MAX qwords in
one block, so this ASSERT would go off. Also, it is possible for the histogram
to overflow. We cap them to UINT16_MAX to prevent this.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4257
5809 Blowaway full receive in v1 pool causes kernel panic
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5809https://github.com/illumos/illumos-gate/commit/f40b29c
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
6537 Panic on zpool scrub with DEBUG kernel
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
References:
https://www.illumos.org/issues/6537https://github.com/illumos/illumos-gate/commit/8c04a1f
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
6096 ZFS_SMB_ACL_RENAME needs to cleanup better
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6096https://github.com/illumos/illumos-gate/commit/8f5190a5
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
6450 scrub/resilver unnecessarily traverses snapshots created
after the scrub started
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/6450https://github.com/illumos/illumos-gate/commit/38d6103
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
For a Case Insensitive file system we must avoid creating negative
entries in the dentry cache. We must also pass the FIGNORECASE into
zfs_lookup so that special files are handled correctly.
We must also prevent negative dentries from being created when files are
unlinked.
Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.)
Also tested with printks (now removed) to ensure that lookups come to
zpl_lookup when negative should not exist.
Tests:
1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt
and ensure no errors.
2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt
and ensure that the last ls shows log messages showing the lookup
went all the way to zpl_lookup.
Thanks to tuxoko for helping me get this correct.
Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4243
6527 Possible access beyond end of string in zpool comment
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/6527https://github.com/illumos/illumos-gate/commit/2bd7a8d
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
6495 Fix mutex leak in dmu_objset_find_dp
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Albert Lee <trisk@omniti.com>
References:
https://www.illumos.org/issues/6495https://github.com/illumos/illumos-gate/commit/2bad225
Ported-by: Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
6414 vdev_config_sync could be simpler
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6414https://github.com/illumos/illumos-gate/commit/eb5bb58
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Reintroduce a slightly adapted version of the Illumos logic for
synchronous unlinks. The basic idea here is that only files
smaller than zfs_delete_blocks (20480) blocks should be deleted
synchronously. Unlinking larger files should be handled
asynchronously to minimize impact to the caller.
To accomplish this iput() which is responsible for calling
zfs_znode_delete() on Linux is only called in the delete_now
path. Otherwise zfs_async_iput() is used which allows the
last reference to be dropped by a taskq thread effectively
making the removal asynchronous.
Porting notes:
- Add zfs_delete_blocks module option for performance analysis.
The default value is DMU_MAX_DELETEBLKCNT which is the same
as upstream. Reducing this value means that smaller files
will be unlinked asynchronously like large files.
- All occurrences of zfsvfs changes to zsb.
Ported-by: KernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Since it's set to arc_c_max / 2, it must be set after arc_c_max is set.
Also added protection against it falling below 2 * maxblocksize in
userland builds.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4268
Adjusting arc_c directly is racy because it can happen in the context
of multiple threads. It should always be >= 2 * maxblocksize. Set it
to a known valid value rather than adjusting it directly.
In addition refactor arc_shrink() to a simpler structure, protect against
underflow in the calculation of the new arc_c value.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reverts: 935434efCloses: #3904Closes: #4161
4950 files sometimes can't be removed from a full filesystem
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/4950https://github.com/illumos/illumos-gate/commit/4bb7380
Porting notes:
- ZoL currently does not log discards to zvols, so the portion of
this patch that modifies the discard logging to mark it as
freeing space has been discarded.
2. may_delete_now had been removed from zfs_remove() in ZoL.
It has been reintroduced.
3. We do not try to emulate vnodes, so the following lines are
not valid on Linux:
mutex_enter(&vp->v_lock);
may_delete_now = vp->v_count == 1 && !vn_has_cached_data(vp);
mutex_exit(&vp->v_lock);
This has been replaced with:
mutex_enter(&zp->z_lock);
may_delete_now = atomic_read(&ip->i_count) == 1 && !(zp->z_is_mapped);
mutex_exit(&zp->z_lock);
Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Check if the lock is held while holding the z_hold_locks() lock.
This prevents a possible use-after-free bug for callers which are
not holding the lock. There currently are no such callers so this
can't cause a problem today but it has been fixed regardless.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4244
Issue #4124
The registered xattr .list handler was simplified in the 4.5 kernel
to only perform a permission check. Given a dentry for the file it
must return a boolean indicating if the name is visible. This
differs slightly from the previous APIs which also required the
function to copy the name in to the provided list and return its
size. That is now all the responsibility of the caller.
This should be straight forward change to make to ZoL since we've
always required the caller to make the copy. However, this was
slightly complicated by the need to support 3 older APIs. Yes,
between 2.6.32 and 4.5 there are 4 versions of this interface!
Therefore, while the functional change in this patch is small it
includes significant cleanup to make the code understandable and
maintainable. These changes include:
- Improved configure checks for .list, .get, and .set interfaces.
- Interfaces checked from newest to oldest.
- Strict checking for each possible known interface.
- Configure fails when no known interface is available.
- HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency
with similar iops and fops configure checks.
- POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to
move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}.
Compatibility wrapper were added for old kernels.
- ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing
ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be
a valid pointer, passing NULL for the 'list' and 'name' variables
is allowed and must be checked for. All .list functions were
updated to use the wrapper to aid readability.
- zpl_xattr_filldir() updated to use the .list function for its
permission check which is consistent with the updated Linux 4.5
interface. If a .list function is registered it should return 0
to indicate a name should be skipped, if there is no registered
function the name will be added.
- Additional documentation from xattr(7) describing the correct
behavior for each namespace was added before the relevant handlers.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
The follow_link() interface was retired in favor of get_link().
In the process of phasing in get_link() the Linux kernel went
through two different versions. The first of which depended
on put_link() and the final version on a delayed done function.
- Improved configure checks for .follow_link, .get_link, .put_link.
- Interfaces checked from newest to oldest.
- Strict checking for each possible known interface.
- Configure fails when no known interface is available.
- Both versions .get_link are detected and supported as well
two previous versions of .follow_link.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
5045 use atomic_{inc,dec}_* instead of atomic_add_*
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5045https://github.com/illumos/illumos-gate/commit/1a5e258
Porting notes:
- All changes to non-ZFS files dropped.
- Changes to zfs_vfsops.c dropped because they were Illumos specific.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4220
4039 zfs_rename()/zfs_link() needs stronger test for XDEV
Reviewed by: Gordon Ross <gordon.ross@nexenta.com>
Reviewed by: Kevin Crowe <kevin.crowe@nexenta.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://www.illumos.org/issues/4039https://github.com/illumos/illumos-gate/commit/18e6497
Porting notes:
- This check was updated in Linux in a similar fashion early on in
the port. Therefore, this patch just reorders the function and
updates the comment so it flows the same way as the upstream code.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4218
3557 dumpvp_size is not updated correctly when a dump zvol's size is changed
3558 setting the volsize on a dump device does not return back ENOSPC
3559 setting a volsize larger than the space available sometimes succeeds
3560 dumpadm should be able to remove a dump device
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Albert Lee <trisk@nexenta.com>
References:
https://www.illumos.org/issues/3559https://github.com/illumos/illumos-gate/commit/c61ea56
Porting notes:
- Internal zvol.c changes not applied due to implementation differences.
The external interface and behavior was already consistent with the
latest upstream code.
- Retired 2.6.28 HAVE_CHECK_DISK_SIZE_CHANGE configure check. All
supported kernels (2.6.32 and newer) provide this interface.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4217
When replacing an xattr would cause overflowing in SA, we would fallback
to xattr dir. However, current implementation don't clear the one in SA,
so we would end up with duplicated SA.
For example, running the following script on an xattr=sa filesystem
would cause duplicated "user.1".
-- dup_xattr.sh begin --
randbase64()
{
dd if=/dev/urandom bs=1 count=$1 2>/dev/null | openssl enc -a -A
}
file=$1
touch $file
setfattr -h -n user.1 -v `randbase64 5000` $file
setfattr -h -n user.2 -v `randbase64 20000` $file
setfattr -h -n user.3 -v `randbase64 20000` $file
setfattr -h -n user.1 -v `randbase64 20000` $file
getfattr -m. -d $file
-- dup_xattr.sh end --
Also, when a filesystem is switch from xattr=sa to xattr=on, it will
never modify those in SA. This would cause strange behavior like, you
cannot delete an xattr, or setxattr would cause duplicate and the result
would not match when you getxattr.
For example, the following shell sequence.
-- shell begin --
$ sudo zfs set xattr=sa pp/fs0
$ touch zzz
$ setfattr -n user.test -v asdf zzz
$ sudo zfs set xattr=on pp/fs0
$ setfattr -x user.test zzz
setfattr: zzz: No such attribute
$ getfattr -d zzz
user.test="asdf"
$ setfattr -n user.test -v zxcv zzz
$ getfattr -d zzz
user.test="asdf"
user.test="asdf"
-- shell end --
We fix this behavior, by first finding where the xattr resides before
setxattr. Then, after we successfully updated the xattr in one location,
we will clear the other location. Note that, because update and clear
are not in single tx, we could still end up with duplicated xattr. But
by doing setxattr again, it can be fixed.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3472Closes#4153
The fast write mutex is intended to protect accounting, but it is
redundant because all accounting is performed through atomic operations.
It also serializes all metaslab IO behind a mutex, which introduces a
theoretical scaling regression that the Illumos developers did not like
when we showed this to them. Removing it makes the selection of the
metaslab_group lock free as it is on Illumos. The selection is not quite
the same without the lock because the loop races with IO completions,
but any imbalances caused by this are likely to be corrected by
subsequent metaslab group selections.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3643
The zfs_znode_hold_enter() / zfs_znode_hold_exit() functions are used to
serialize access to a znode and its SA buffer while the object is being
created or destroyed. This kind of locking would normally reside in the
znode itself but in this case that's impossible because the znode and SA
buffer may not yet exist. Therefore the locking is handled externally
with an array of mutexs and AVLs trees which contain per-object locks.
In zfs_znode_hold_enter() a per-object lock is created as needed, inserted
in to the correct AVL tree and finally the per-object lock is held. In
zfs_znode_hold_exit() the process is reversed. The per-object lock is
released, removed from the AVL tree and destroyed if there are no waiters.
This scheme has two important properties:
1) No memory allocations are performed while holding one of the z_hold_locks.
This ensures evict(), which can be called from direct memory reclaim, will
never block waiting on a z_hold_locks which just happens to have hashed
to the same index.
2) All locks used to serialize access to an object are per-object and never
shared. This minimizes lock contention without creating a large number
of dedicated locks.
On the downside it does require znode_lock_t structures to be frequently
allocated and freed. However, because these are backed by a kmem cache
and very short lived this cost is minimal.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4106
Add a zfs_object_mutex_size module option to facilitate resizing the
the per-dataset znode mutex array. Increasing this value may help
make the deadlock described in #4106 less common, but this is not a
proper fix. This patch is primarily to aid debugging and analysis.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #4106
Under RHEL6/CentOS6 the default stack size must be increased to 32K
to prevent overflowing the stack when running ztest. This isn't an
issue for other distributions due to either the version of pthreads
or perhaps the compiler. Doubling the stack size resolves the
issue safely for all distribution and leaves us some headroom.
$ sudo -E ztest -V -T 300 -f /var/tmp/
5 vdevs, 7 datasets, 23 threads, 300 seconds...
loading space map for vdev 0 of 1, metaslab 0 of 30 ...
...
loading space map for vdev 0 of 1, metaslab 14 of 30 ...
child died with signal 11
Exited ztest with error 3
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4215
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3749https://github.com/illumos/illumos-gate/commit/3cb69f7
Porting notes:
- [include/sys/spa_impl.h]
- ffe9d38 Add generic errata infrastructure
- 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
- 2668527 Add linux events
- 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
- Updated spa_config_sync() to match illumos with the exception
of a Linux specific block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5438 zfs_blkptr_verify should continue after zfs_panic_recover
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5438https://github.com/illumos/illumos-gate/commit/5897eb4
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
6171 dsl_prop_unregister() slows down dataset eviction.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/6171https://github.com/illumos/illumos-gate/commit/03bad06
Porting notes:
- Conflicts
- 3558fd7 Prototype/structure update for Linux
- 2cf7f52 Linux compat 2.6.39: mount_nodev()
- 13fe019 Illumos #3464
- 241b541 Illumos 5959 - clean up per-dataset feature count code
- dsl_prop_unregister() preserved until out of tree consumers
like Lustre can transition to dsl_prop_unregister_all().
- Fixing 'space or tab at end of line' in include/sys/dsl_dataset.h
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
6288 dmu_buf_will_dirty could be faster
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6288https://github.com/illumos/illumos-gate/commit/0f2e7d0
Porting notes:
- [module/zfs/dbuf.c]
- Fix 'warning: ISO C90 forbids mixed declarations and code'
by moving 'dbuf_dirty_record_t *dr' to start of code block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
6292 exporting a pool while an async destroy is running can leave
entries in the deferred tree
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Fabian Keil <fk@fabiankeil.de>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
References:
https://www.illumos.org/issues/6292https://github.com/illumos/illumos-gate/commit/a443cc8
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix build failure accidentally introduced by 1715493. This only
results in a failure when debugging is disabled.
dsl_dataset.c: In function 'dsl_dataset_stats':
dsl_dataset.c:1698:45: error: 'dp' undeclared (first use in this function)
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
4929 want prevsnap property
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Matt Amdur <matt.amdur@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/4929https://github.com/illumos/illumos-gate/commit/b461c74
Porting notes:
- [include/sys/fs/zfs.h]
- f67d70 Create an 'overlay' property
- 11b9ec Add full SELinux support
- [fs/zfs/dsl_dataset.c]
- This increases the stack size of dsl_dataset_stats() but
nothing has been changed until this is shown to be an issue.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3749https://github.com/illumos/illumos-gate/commit/3cb69f7
Porting notes:
- [include/sys/spa_impl.h]
- ffe9d38 Add generic errata infrastructure
- 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
- 2668527 Add linux events
- 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
- Updated spa_config_sync() to match illumos with the exception
of a Linux specific block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix an off by one error introduced by fcff0f3 which triggers an
assertion when 16M blocks are used with send/recv. This fix was
intentionally not folder in to the Illumos commit so it can be
easily cherry-picked by upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When casesensitivity=insensitive is set for the
file system, we can deadlock in a rename if the user uses different case
for each path. For example rename("A/some-file.txt", "a/some-file.txt").
The simple test for this is:
1. mkdir some-dir in a ZFS file system
2. touch some-dir/some-file.txt
3. mv Some-dir/some-file.txt some-dir/some-other-file.txt
This last request deadlocks trying to relock the i_mutex on the inode for
the parent directory.
The solution is to use d_add_ci in zpl_lookup if we are on a file system
that has the casesensitivity=insensitive attribute set.
This patch checks if we are working on a case insensitive file system and if
so, allocates storage for the case insensitive name and passes it to
zfs_lookup and then calls d_add_ci instead of d_splice_alias.
The performance impact seems to be minimal even though we have introduced a
kmalloc and kfree in the lookup path.
The problem was found when running Microsoft's FSCT against Samba on top of
ZFS On Linux.
Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4136
3139 zdb dies when it tries to determine path of unlinked file
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://github.com/illumos/illumos-gate/commit/1ce39b5https://www.illumos.org/issues/3139
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The function sa_update() accepts a 32-bit length parameter and
assigns it to a 16-bit field in sa_bulk_attr_t, potentially
truncating the passed-in value. This could lead to corrupt system
attribute (SA) records getting written to the pool. Add a VERIFY to
sa_update() to detect cases where overflow would occur. The SA length
is limited to 16-bit values by the on-disk format defined by
sa_hdr_phys_t.
The function zfs_sa_set_xattr() is vulnerable to this bug if the
unpacked nvlist of xattrs is less than 64k in size but the packed
size is greater than 64k. Fix this by appropriately checking the
size of the packed nvlist before calling sa_update(). Add error
handling to zpl_xattr_set_sa() to keep the cached list of SA-based
xattrs consistent with the data on disk.
Lastly, zfs_sa_set_xattr() calls dmu_tx_abort() on an assigned
transaction if sa_update() returns an error, but the DMU only allows
unassigned transactions to be aborted. Wrap the sa_update() call in a
VERIFY0, remove the transaction abort, and call dmu_tx_commit()
unconditionally. This is consistent practice with other callers
of sa_update().
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4150
We need truncate and remove be in the same tx when doing zfs_rmnode on xattr
dir. Otherwise, if we truncate and crash, we'll end up with inconsistent zap
object on the delete queue. We do this by skipping dmu_free_long_range and let
zfs_znode_delete to do the work.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4114
Issue #4052
Issue #4006
Issue #3018
Issue #2861
During zfs_rmnode on a xattr dir, if the system crash just after
dmu_free_long_range, we would get empty xattr dir in delete queue. This would
cause blkid=0 be passed into zap_get_leaf_byblk when doing zfs_purgedir during
mount, and would try to do rw_enter on a wrong structure and cause system
lockup.
We fix this by returning ENOENT when blkid is zero in zap_get_leaf_byblk.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4114Closes#4052Closes#4006Closes#3018Closes#2861
There exists a lock inversion between the z_xattr_lock and the
z_teardown_lock. Resolve this by taking the z_teardown_lock in
all registered xattr callbacks prior to taking the z_xattr_lock.
This ensures the locks are always taken is the same order thus
preventing a deadlock. Note the z_teardown_lock is taken again
in zfs_lookup() and this is safe because the z_teardown lock is
a re-entrant read reader/writer lock.
* process-1
zpl_xattr_get -> Takes zp->z_xattr_lock
__zpl_xattr_get
zfs_lookup -> Takes zsb->z_teardown_lock in ZFS_ENTER macro
* process-2
zfs_ioc_recv -> Takes zsb->z_teardown_lock in zfs_suspend_fs()
zfs_resume_fs
zfs_rezget -> Takes zp->z_xattr_lock
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#3943Closes#3969Closes#4121
Commit efc412b updated spa_config_write() for Linux 4.2 kernels to
truncate and overwrite rather than rename the cache file. This is
the correct fix but it should have only been applied for the kernel
build. In user space rename(2) is needed because ztest depends on
the cache file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4129
When running a kernel with CONFIG_LOCKDEP=y, lockdep reports possible
recursive locking in some cases and possible circular locking dependency
in others, within the SPL and ZFS modules.
This patch uses a mutex type defined in SPL, MUTEX_NOLOCKDEP, to mark
such mutexes when they are initialized. This mutex type causes
attempts to take or release those locks to be wrapped in lockdep_off()
and lockdep_on() calls to silence the dependency checker and allow the
use of lock_stats to examine contention.
For RW locks, it uses an analogous lock type, RW_NOLOCKDEP.
The goal is that these locks are ultimately changed back to type
MUTEX_DEFAULT or RW_DEFAULT, after the locks are annotated to reflect
their relationship (e.g. z_name_lock below) or any real problem with the
lock dependencies are fixed.
Some of the affected locks are:
tc_open_lock:
=============
This is an array of locks, all with same name, which txg_quiesce must
take all of in order to move txg to next state. All default to the same
lockdep class, and so to lockdep appears recursive.
zp->z_name_lock:
================
In zfs_rmdir,
dzp = znode for the directory (input to zfs_dirent_lock)
zp = znode for the entry being removed (output of zfs_dirent_lock)
zfs_rmdir()->zfs_dirent_lock() takes z_name_lock in dzp
zfs_rmdir() takes z_name_lock in zp
Since both dzp and zp are type znode_t, the locks have the same default
class, and lockdep considers it a possible recursive lock attempt.
l->l_rwlock:
============
zap_expand_leaf() sometimes creates two new zap leaf structures, via
these call paths:
zap_deref_leaf()->zap_get_leaf_byblk()->zap_leaf_open()
zap_expand_leaf()->zap_create_leaf()->zap_expand_leaf()->zap_create_leaf()
Because both zap_leaf_open() and zap_create_leaf() initialize
l->l_rwlock in their (separate) leaf structures, the lockdep class is
the same, and the linux kernel believes these might both be the same
lock, and emits a possible recursive lock warning.
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3895
Adds zio_taskq_batch_pct as an exported module parameter,
allowing users to modify it at module load time.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4110
Update the bounds checking for zfs_vdev_aggregation_limit so that
it has a floor of zero and a maximum value of the supported block
size for the pool.
Additionally add an early return when zfs_vdev_aggregation_limit
equals zero to disable aggregation. For very fast solid state or
memory devices it may be more expensive to perform the aggregation
than to issue the IO immediately.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This deadlock may manifest itself in slightly different ways but
at the core it is caused by a memory allocation blocking on file-
system reclaim in the zio pipeline. This is normally impossible
because zio_execute() disables filesystem reclaim by setting
PF_FSTRANS on the thread. However, kmem cache allocations may
still indirectly block on file system reclaim while holding the
critical vq->vq_lock as shown below.
To resolve this issue zio_buf_alloc_flags() is introduced which
allocation flags to be passed. This can then be used in
vdev_queue_aggregate() with KM_NOSLEEP when allocating the
aggregate IO buffer. Since aggregating the IO is purely a
performance optimization we want this to either succeed or fail
quickly. Trying too hard to allocate this memory under the
vq->vq_lock can negatively impact performance and result in
this deadlock.
* z_wr_iss
zio_vdev_io_start
vdev_queue_io -> Takes vq->vq_lock
vdev_queue_io_to_issue
vdev_queue_aggregate
zio_buf_alloc -> Waiting on spl_kmem_cache process
* z_wr_int
zio_vdev_io_done
vdev_queue_io_done
mutex_lock -> Waiting on vq->vq_lock held by z_wr_iss
* txg_sync
spa_sync
dsl_pool_sync
zio_wait -> Waiting on zio being handled by z_wr_int
* spl_kmem_cache
spl_cache_grow_work
kv_alloc
spl_vmalloc
...
evict
zpl_evict_inode
zfs_inactive
dmu_tx_wait
txg_wait_open -> Waiting on txg_sync
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3808Closes#3867
There exists a lock inversion between the z_xattr_lock and the
z_teardown_lock. Detect this case and return EBUSY so zfs_resume_fs()
will mark the inode stale and it can be safely revalidated on next
access.
* process-1
zpl_xattr_get -> Takes zp->z_xattr_lock
__zpl_xattr_get
zfs_lookup -> Takes zsb->z_teardown_lock in ZFS_ENTER macro
* process-2
zfs_ioc_recv -> Takes zsb->z_teardown_lock in zfs_suspend_fs()
zfs_resume_fs
zfs_rezget -> Takes zp->z_xattr_lock
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3969
Since uio now supports bvec, we can convert bio into uio and reuse
dmu_{read,write}_uio. This way, we can remove some duplicate code.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4078
Userspace can freely pass in whatever iovec it feels like, and it's perfectly
legal to pass an iovec which contains a zero length segment. In the current
implementation, uio_prefaultpages would touch an out of bound byte in the
"last byte" logic. While this probably wouldn't cause any critical error, we
would like uio_prefaultpages to be able to continue gracefully.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4078
If a bit were cleared in `bp->blk_birth` such that the txg birth
was now lower than any other txg_birth in the deadlist, then there
will be no entry before this in the tree.
This should be impossible but regardless error handling code has
been added for this case. By default this is left as a fatal case
and the blk_birth is logged. However, setting `zfs_recover=1` will
cause the bp to be placed at the start of the deadlist even though
it contains an invalid blk_birth.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4086Closes#4089
Commit 5f6d0b6 was originally added to gracefully handle block
pointers with a damaged logical size. However, it incorrectly
assumed that all passed arc_done_func_t could handle a NULL
arc_buf_t.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4069Closes#4080
While exceptionally unlikely to cause a problem the zfs_snapentry_t
hold should be taken before the dispatch to prevent any possibility
of the task being processed before the hold.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
When a concorrent mount finishes just before calling to
zfsctl_snapshot_ismounted, if we return EISDIR, the VFS will return
with EREMOTE. We should instead just return 0, so VFS may retry and
would likely notice the dentry is alreadly mounted. This will be
inline with when usermode helper return EBUSY.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
By changing the zfs_snapshot_lock from a mutex to a rw lock the
zfsctl_lookup_objset() function can be allowed to run concurrently.
This should reduce the latency of fh_to_dentry lookups in ZFS
snapshots which are being accessed over NFS.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
The zfsctl_snapshot_unmount_delay() function must not be called
from zfsctl_lookup_objset() while it is currently holding the
zfs_snapshot_lock. This will result in a deadlock. It is safe
to call zfsctl_snapshot_unmount_delay_impl() directly because the
function already has a reference on the zfs_snapentry_t.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3997
There are cases where it's desirable that auto-mounted snapshots
not expire after a fixed duration. They should be unmounted only
when the filesystem they are a snapshot of is unmounted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
objsetid is not unique across pool, so using it solely as key would cause
panic when automounting two snapshot on different pools with the same
objsetid. We fix this by adding spa pointer as additional key.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3948
Issue #3786
Issue #3887
While stack size will vary by architecture it has historically defaulted to
8K on x86_64 systems. However, as of Linux 3.15 the default thread stack
size was increased to 16K. These kernels are now the default in most non-
enterprise distributions which means we no longer need to assume 8K stacks.
This patch takes advantage of that fact by appropriately reverting stack
conservation changes which were made to ensure stability. Changes which
may have had a negative impact on performance for certain workloads. This
also has the side effect of bringing the code slightly more in line with
upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4059
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/5959https://github.com/illumos/illumos-gate/commit/ca0cc39
Porting notes:
illumos code doesn't check for feature_get_refcount() returning
ENOTSUP (which means feature is disabled) in zdb. zfsonlinux added
a check in https://github.com/zfsonlinux/zfs/commit/784652c
due to #3468. The check was reintroduced here.
Ported-by: Witaut Bajaryn <vitaut.bayaryn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3965
Provide a generic interface to prefetch ZAP entries by name. This
functionality is being added for external consumers such as Lustre.
It is based of the existing zap_prefetch_uint64() version which is
used by the deduplication code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4061
This was originally in fe0ed8f910, but somehow
was changed and not working anymore. And it will cause the following error:
modprobe: ERROR: ../libkmod/libkmod.c:506 lookup_builtin_file() could not open builtin file '/lib/modules/4.2.0-18-generic/modules.builtin.bin'
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4027
The xattr_hander->{list,get,set} were changed to take a xattr_handler,
and handler_flags argument was removed and should be accessed by
handler->flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
As part of block polling support in Linux 4.4, make_request_fn should
return a cookie value of type blk_qc_t. For now, we make zvol_request
always return BLK_QC_T_NONE until we assess whether and how we want
to support block polling.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
On 32 bit, the calculation of zfs_dirty_data_max from phymem will overflow,
causing it to be smaller than zfs_dirty_data_sync, and will cause txg being
delayed while no one write to disk. The end result is horrendous write speed.
On 4G ram 32-bit VM, before this patch, simple dd results in ~7MB/s. Now it
can reach speed on par with 64-bit VM.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3973
On 32 bit system, zio_buf_cache is limit to 1M. Larger than that is all NULL.
So we need to avoid reaping them.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3973
When concurrent threads accessing the snapdir, one will succeed the user
helper mount while others will get EBUSY. However, the original code treats
those EBUSY threads as success and goes on to do zfsctl_snapshot_add, which
causes repeated avl_add and thus panic.
Also, if the snapshot is already mounted somewhere else, a thread accessing
the snapdir will also get EBUSY from user helper mount. And it will cause
strange things as doing follow_down_one will fail and then follow_up will jump
up to the mountpoint of the filesystem and confuse the hell out of VFS.
The patch fix both behavior by returning 0 immediately for the EBUSY threads.
Note, this will have a side effect for the second case where the VFS will
retry several times before returning ELOOP.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4018
Because errors during module load are so rare it went unnoticed that
it was possible that a positive errno was returned. This would result
in the module being loaded, nothing being initialized, and a system
panic shortly thereafter. This is what was causing the hard failures
in the automated testing.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When decreasing the maximum ARC size preserve the 3/4 default
ratio for the arc_meta_limit. Otherwise, the arc_meta_limit
may be set the same as arc_max.
Signed-off-by: AndCycle <andcycle@andcycle.idv.tw>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4001
When sa_bulk_lookup() fails, unlock_new_inode() will spit out a WARNING. It
will also recursive deadlock on ZFS_OBJ_HOLD_ENTER in zfs_zinactive().
Since we never call insert_inode_locked in fail path, I_NEW is never set, the
inode is never hashed. So unlock_new_inode() can be safely remove it.
We set z_sa_hdl to NULL in fail path so that iput path will stop at
zfs_inactive() without entering zfs_zinactive(). This way we can avoid the
deadlock and prevent double sa_handle_destroy().
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3899
Currently, vdev_disk_physio_completion will try to wake up an waiter without
first checking the existence. This creates a race window in which complete is
called after dr is freed.
We add dr_wait in dio_request to indicate the existence of waiter. Also,
remove dr_rw since no one is using it, and reorder dr_ref to make the struct
more compact in 64bit.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3917
Issue #3880
Strictly enforce keeping 'arc_c >= arc_c_min'. The ASSERTs are
left in place to catch this in a debug build but logic has been
added to gracefully handle in a production build.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3904
We should never block when holding a spin lock, but zfs_inode_update can
block in the critical section of a spin lock in zfs_inode_update:
zfs_inode_update -> dmu_object_size_from_db -> zrl_add -> mutex_enter
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3858
All users of zv_lock were removed by 37f9dac, but we forgot to remove
it. Lets remove it as clean up.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3858
When doing uioskip to skip an iovec to the very end, the current loop
condition will falsely check pass the end of iovec. We fix this checking
uio_iovcnt first.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3806Closes#3850
Userspace can trigger an assertion by passing a zero-length segment
when assertions are enabled:
[27961.614792] VERIFY3(skip < iov->iov_len) failed (0 < 0)
[27961.614795] PANIC at zfs_uio.c:187:uio_prefaultpages()
[27961.614805] Call Trace:
[27961.614811] dump_stack+0x45/0x57
[27961.614830] spl_dumpstack+0x44/0x50 [spl]
[27961.614834] spl_panic+0xbb/0x100 [spl]
[27961.614908] uio_prefaultpages+0x134/0x140 [zcommon]
[27961.614930] zfs_write+0x1fd/0xe80 [zfs]
[27961.615014] zpl_write_common_iovec+0x7f/0x110 [zfs]
[27961.615035] zpl_iter_write+0xa0/0xd0 [zfs]
[27961.615037] do_iter_readv_writev+0x59/0x80
[27961.615063] do_readv_writev+0x11b/0x260
[27961.615098] vfs_writev+0x39/0x50
[27961.615100] SyS_writev+0x4a/0xe0
[27961.615103] system_call_fastpath+0x16/0x6e
The solution is to delete the assertion. This could potentially
occur in uiomove as well, which contains analogous assertions
that appear similarly unnecessary, so we remove those as well.
Reported-by: Jonathan Vasquez <jvasquez1011@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3792
This reverts commit 5f8e1e8505. It
was determined that this patch introduced the quota regression
described in #3789.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3443
Issue #3789
Commit b39c22b set the READ_SYNC and WRITE_SYNC flags for a bio
based on the ZIO_PRIORITY_* flag passed in. This had the unnoticed
side-effect of making the vdev_disk_io_start() synchronous for
certain I/Os.
This in turn resulted in vdev_disk_io_start() being able to
re-dispatch zio's which would result in a RCU stalls when a disk
was removed from the system. Additionally, this could negatively
impact performance and explains the performance regressions reported
in both #3829 and #3780.
This patch resolves the issue by making the blocking behavior
dependent on a 'wait' flag being passed rather than overloading
the passed bio flags.
Finally, the WRITE_SYNC and READ_SYNC behavior is restricted to
non-rotational devices where there is no benefit to queuing to
aggregate the I/O.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3652
Issue #3780
Issue #3785
Issue #3817
Issue #3821
Issue #3829
Issue #3832
Issue #3870
As described in the comment above arc_reclaim_thread() it's critical
that the reclaim thread be careful about blocking. Just like it must
never wait on a hash lock, it must never wait on a task which can in
turn wait on the CV in arc_get_data_buf(). This will deadlock, see
issue #3822 for full backtraces showing the problem.
To resolve this issue arc_kmem_reap_now() has been updated to use the
asynchronous arc prune function. This means that arc_prune_async()
may now be called while there are still outstanding arc_prune_tasks.
However, this isn't a problem because arc_prune_async() already
keeps a reference count preventing multiple outstanding tasks per
registered consumer. Functionally, this behavior is the same as
the counterpart illumos function dnlc_reduce_cache().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #3808
Issue #3834
Issue #3822
The zpl_nr_cached_objects() function has been disabled because in the
current code it doesn't provide any critical functionality and it may
result in a deadlock under certain circumstances. However, because
we expect to need these hooks in the future this code has not been
entirely removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3719
Accessing a snapshot via NFS should cause an auto-unmount of that
snapshot to be deferred until such as time as the snapshot is idle.
This is analogous to the zpl_revalidate logic employed by locally
mounted snapshots.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3794
Commit torvalds/linux@4246a0b63b
("block: add a bi_error field to struct bio") dropped the error
argument from bio_endio in favor of newly introduced bio->bi_error.
This also replaces bio->bi_flags value BIO_UPTODATE.
bio_endio was a 3 argument function until Linux 2.6.24, which made it
a 2 argument function, and now the prototype has changed yet again to
a 1 argument function. Support for pre 2.6.24 kernels was already
dropped with 37f9dac592 ("zvol processing should use struct bio")
which assumed the 2 argument version in zvol_request(). Remaining code
to support the 3 argument version is hereby removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Issue #3799
As part of the large block support effort, it makes sense to add
support for large blocks to **zpios(1)**. The specifying of a zfs
block size for zpios is optional and will default to 128K if the
block size is not specified.
`zpios ... -S size | --blocksize size ...`
This will use *size* ZFS blocks for each test, specified as a comma
delimited list with an optional unit suffix. The supported range is
powers of two from 128K through 16M. A range of block sizes can be
tested as follows: `-S 128K,256K,512K,1M`
Example run below
(non realistic results from a VM and output abbreviated for space)
```
--regioncount=750 --regionsize=8M --chunksize=1M --offset=4K
--threaddelay=0 --cleanup --human-readable --verbose --cleanup
--blocksize=128K,256K,512K,1M
th-cnt rg-cnt rg-sz ch-sz blksz wr-data wr-bw rd-data rd-bw
---------------------------------------------------------------------
4 750 8m 1m 128k 5g 90.06m 5g 93.37m
4 750 8m 1m 256k 5g 79.71m 5g 99.81m
4 750 8m 1m 512k 5g 42.20m 5g 93.14m
4 750 8m 1m 1m 5g 35.51m 5g 89.36m
8 750 8m 1m 128k 5g 85.49m 5g 90.81m
8 750 8m 1m 256k 5g 61.42m 5g 99.24m
8 750 8m 1m 512k 5g 49.09m 5g 108.78m
16 750 8m 1m 128k 5g 86.28m 5g 88.73m
16 750 8m 1m 256k 5g 64.34m 5g 93.47m
16 750 8m 1m 512k 5g 68.84m 5g 124.47m
16 750 8m 1m 1m 5g 53.97m 5g 97.20m
---------------------------------------------------------------------
```
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3795Closes#2071
ZFS incorrectly uses directory-based extended attributes even when
xattr=sa is specified as a dataset property or mount option. Support to
honor temporary mount options including "xattr" was added in commit
0282c4137e. There are two issues with the
mount option handling:
* Libzfs has historically included "xattr" in its list of default mount
options. This overrides the dataset property, so the dataset is always
configured to use directory-based xattrs even when the xattr dataset
property is set to off or sa. Address this by removing "xattr" from
the set of default mount options in libzfs.
* There was no way to enable system attribute-based extended attributes
using temporary mount options. Add the mount options "saxattr" and
"dirxattr" which enable the xattr behavior their names suggest. This
approach has the advantages of mirroring the valid xattr dataset
property values and following existing conventions for mount option
names.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3787
Passing NULL for the mount data should not result in EINVAL. It
should be treated as if an empty string were passed and succeed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3771
37f9dac592 replaced the end-start
calculation with a cached value, but neglected to update it on discard
operations. This can cause us to discard data not requested, causing
data loss on zvols.
Reported-by: Richard Connon <richard.connon@zynstra.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3798
6214 zpools going south
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
References:
https://www.illumos.org/issues/6214http://cr.illumos.org/~webrev/sensille/6214_zpools_going_south/
Porting Notes:
Reintroduce b_compress to the l2arc_buf_hdr_t. In commit b9541d6
the compression flags were moved to the generic b_flags in the
arc_buf_hdr_t. This is a problem because l2arc_compress_buf()
may manipulate the compression flags and this can only be done
safely under the hash lock which is not held. See Illumos 6214
for a detailed analysis of the race.
HDR_GET_COMPRESS() macro was removed from arc_buf_info().
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3757
When adding a zvol to the system prefetch zvol_prefetch_bytes from the
start and end of the volume. Prefetching these regions of the volume is
desirable because they are likely to be accessed immediately by blkid(8),
the kernel scanning for a partition table, or another task which probes
the devices.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3659
zfsonlinux/zfs@e20cd6f7a8 caused us to
lose IO accounting on zvols. When I originally wrote that last year, the
symbols we needed to maintain IO accounting were GPL exported, but
torvalds/linux@394ffa503b provided
suitable symbols for restoring this functionality 4 months later. We
can call them to restore the IO accounting on Linux 3.19 and later as
well as any older kernels where that patch is backported.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3741
Internally ZFS keeps a small log to facilitate debugging. By default
the log is disabled, to enable it set zfs_dbgmsg_enable=1. The contents
of the log can be accessed by reading the /proc/spl/kstat/zfs/dbgmsg file.
Writing 0 to this proc file clears the log.
$ echo 1 >/sys/module/zfs/parameters/zfs_dbgmsg_enable
$ echo 0 >/proc/spl/kstat/zfs/dbgmsg
$ zpool import tank
$ cat /proc/spl/kstat/zfs/dbgmsg
1 0 0x01 -1 0 2492357525542 2525836565501
timestamp message
1441141408 spa=tank async request task=1
1441141408 txg 70 open pool version 5000; software version 5000/5; ...
1441141409 spa=tank async request task=32
1441141409 txg 72 import pool version 5000; software version 5000/5; ...
1441141414 command: lt-zpool import tank
Note the zfs_dbgmsg() and dprintf() functions are both now mapped to
the same log. As mentioned above the kernel debug log can be accessed
though the /proc/spl/kstat/zfs/dbgmsg kstat. For user space consumers
log messages are immediately written to stdout after applying the
ZFS_DEBUG environment variable.
$ ZFS_DEBUG=on ./cmd/ztest/ztest -V
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3728
This patch is based on the previous work done by @andrey-ve and
@yshui. It triggers the automount by using kern_path() to traverse
to the known snapshout mount point. Once the snapshot is mounted
NFS can access the contents of the snapshot.
Allowing NFS clients to access to the .zfs/snapshot directory would
normally mean that a root user on a client mounting an export with
'no_root_squash' would be able to use mkdir/rmdir/mv to manipulate
snapshots on the server. To prevent configuration mistakes a
zfs_admin_snapshot module option was added which disables the
mkdir/rmdir/mv functionally. System administators desiring this
functionally must explicitly enable it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2797Closes#1655Closes#616
Prevents NFS client from detection of different fileids of snapshot root dentry
before & after snapshot mount.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux 2.6.36 introduced REQ_SECURE to indicate when discards *must* be
processed, such that we cannot do optimizations like block alignment.
Consequently, the discard semantics prior to 2.6.36 require us to always
process unaligned discards. Previously, we would do this optimization
regardless. This patch changes things to correctly restrict this
optimization to situations where REQ_SECURE exists, but is not included
in the flags.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Internally, zvols are files exposed through the block device API. This
is intended to reduce overhead when things require block devices.
However, the ZoL zvol code emulates a traditional block device in that
it has a top half and a bottom half. This is an unnecessary source of
overhead that does not exist on any other OpenZFS platform does this.
This patch removes it. Early users of this patch reported double digit
performance gains in IOPS on zvols in the range of 50% to 80%.
Comments in the code suggest that the current implementation was done to
obtain IO merging from Linux's IO elevator. However, the DMU already
does write merging while arc_read() should implicitly merge read IOs
because only 1 thread is permitted to fetch the buffer into ARC. In
addition, commercial ZFSOnLinux distributions report that regular files
are more performant than zvols under the current implementation, and the
main consumers of zvols are VMs and iSCSI targets, which have their own
elevators to merge IOs.
Some minor refactoring allows us to register zfs_request() as our
->make_request() handler in place of the generic_make_request()
function. This eliminates the layer of code that broke IO requests on
zvols into a top half and a bottom half. This has several benefits:
1. No per zvol spinlocks.
2. No redundant IO elevator processing.
3. Interrupts are disabled only when actually necessary.
4. No redispatching of IOs when all taskq threads are busy.
5. Linux's page out routines will properly block.
6. Many autotools checks become obsolete.
An unfortunate consequence of eliminating the layer that
generic_make_request() is that we no longer calls the instrumentation
hooks for block IO accounting. Those hooks are GPL-exported, so we
cannot call them ourselves and consequently, we lose the ability to do
IO monitoring via iostat. Since zvols are internally files mapped as
block devices, this should be okay. Anyone who is willing to accept the
performance penalty for the block IO layer's accounting could use the
loop device in between the zvol and its consumer. Alternatively, perf
and ftrace likely could be used. Also, tools like latencytop will still
work. Tools such as latencytop sometimes provide a better view of
performance bottlenecks than the traditional block IO accounting tools
do.
Lastly, if direct reclaim occurs during spacemap loading and swap is on
a zvol, this code will deadlock. That deadlock could already occur with
sync=always on zvols. Given that swap on zvols is not yet production
ready, this is not a blocker.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Reclaim in the traverse prefetch thread, which is run on the system
taskq, can overrun the stack.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3733
Add the required kernel side infrastructure to parse arbitrary
mount options. This enables us to support temporary mount
options in largely the same way it is handled on other platforms.
See the 'Temporary Mount Point Properties' section of zfs(8)
for complete details.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#985Closes#3351
Commit 49ddb31506 added the
zfs_arc_average_blocksize parameter to allow control over the size of
the arc hash table. The dbuf hash table's size should be determined
similarly.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3721
Allow for easy turning of a pools reserved free space. Previous
versions of ZFS (v0.6.4 and earlier) held 1/64 of the pools capacity
in reserve. Commits 3d45fdd and 0c60cc3 increased this to 1/32.
Setting spa_slop_shift=6 will restore the previous default setting.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3724
The LBA weighting makes sense on rotational media where the outer tracks
have twice the bandwidth of the inner tracks. However, it is detrimental
on nonrotational media such as solid state disks, where the only effect
is to ensure that metaslabs enter the best-fit allocation behavior
sooner, which is detrimental to performance. It also makes no sense on
files where the underlying filesystem can arrange things however it
wants.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3712
Before read locking z_teardown_inactive_lock, we need to check if we have
already had write lock on it. Otherwise, we would deadlock on ourself when
doing rollback:
zfs_ioc_rollback
->zfs_suspend_fs (z_teardown_inactive_lock, RW_WRITER)
->zfs_resume_fs->zfs_rezget->zfs_iput_async->iput-> ...
->zfs_inactive (z_teardown_inactive_lock, RW_READER)
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2869
The misc_deregister() function was changed to a void return type.
Rather than add compatibility code to detect this change simply
ignore the return code on all kernels. It was only used to log
an informational error message of no real value.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Re-factor the .zfs/snapshot auto-mouting code to take in to account
changes made to the upstream kernels. And to lay the groundwork for
enabling access to .zfs snapshots via NFS clients. This patch makes
the following core improvements.
* All actively auto-mounted snapshots are now tracked in two global
trees which are indexed by snapshot name and objset id respectively.
This allows for fast lookups of any auto-mounted snapshot regardless
without needing access to the parent dataset.
* Snapshot entries are added to the tree in zfsctl_snapshot_mount().
However, they are now removed from the tree in the context of the
unmount process. This eliminates the need complicated error logic
in zfsctl_snapshot_unmount() to handle unmount failures.
* References are now taken on the snapshot entries in the tree to
ensure they always remain valid while a task is outstanding.
* The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right
after the auto-mount succeeds. This allows to kernel to unmount
idle auto-mounted snapshots if needed removing the need for the
zfsctl_unmount_snapshots() function.
* Snapshots in active use will not be automatically unmounted. As
long as at least one dentry is revalidated every zfs_expire_snapshot/2
seconds the auto-unmount expiration timer will be extended.
* Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS
to be immediately unmounted when the dentry was revalidated. This
was a consequence of ZFS invaliding all snapdir dentries to ensure that
negative dentries didn't mask new snapshots. This patch modifies the
behavior such that only negative dentries are invalidated. This solves
the issue and may result in a performance improvement.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3589Closes#3344Closes#3295Closes#3257Closes#3243Closes#3030Closes#2841
There's no metadata to write to disk for ctldir inodes. So we check if
a inode belongs to the ctldir in zpl_commit_metadata, and returns
immediately if it is.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2797
zvols should not be an entropy source for the kernel. Disable it to be
consistent with the upstream kernel.
torvalds/linux@b277da0a8a
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3713
Add a missing space to the zfs_vdev_sync_write_min_active module
parameter description.
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3714
As part of the stack reduction effort in
50b25b2187, a zio_t containing a taskq_ent
was added to struct vdev_queue which itself is part of struct vdev.
The taskq entry should be initialized as is currently done in zio_create()
for newly-created bare zio_t object. The rationale is the same as is
described in f467b05a26.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3709
If the ZAP object containing a snapshot map is corrupted due to an
unrecoverable checksum error or otherwise, dsl_dataset_name() will
normally panic the system due to its VERIFY.
This patch attempts to allow a recovery avenue from such situations by
manufacturing a descriptive snapshot name and then ignoring the error.
Scrubbing a pool with this type of corruption will then show the affected
object in the error list rather than panicking.
The recovery code is only enabled when the zfs_recover module parameter
is set.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3705
Since ZoL allows large blocks to be used by volumes, unlike upstream
illumos, the feature flag must be checked prior to volume creation.
This is critical because unlike filesystems, volumes will create a
object which uses large blocks as part of the create. Therefore, it
cannot be safely checked in zfs_check_settable() after the dataset
can been created.
In addition this patch updates the relevant error messages to use
zfs_nicenum() to print the maximum blocksize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3591
When support for large blocks was added DMU_MAX_ACCESS was increased
to allow for blocks of up to 16M to fit in a transaction handle.
This had the side effect of increasing the max_hw_sectors_kb for
volumes, which are scaled off DMU_MAX_ACCESS, to 64M from 10M.
This is an issue for volumes which by default use an 8K block size
because it results in dmu_buf_hold_array_by_dnode() allocating a
64K array for the dbufs. The solution is to restore the maximum
size to ~10M. This patch specifically changes it to 16M which is
close enough.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3684
Starting from Linux 4.1 allows iov_iter with bio_vec to be passed into
iter_read/iter_write. Notably, the loop device will pass bio_vec to backend
filesystem. However, current ZFS code assumes iovec without any check, so it
will always crash when using loop device.
With the restructured uio_t, we can safely pass bio_vec in uio_t with UIO_BVEC
set. The uio* functions are modified to handle bio_vec case separately.
The const uio_iov causes some warning in xuio related stuff, so explicit
convert them to non const.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3511Closes#3640
The spa_config_write() function relies on the classic method of
making sure updates to the /etc/zfs/zpool.cache file are atomic.
It writes out a temporary version of the file and then uses
vn_rename() to switch it in to place. This way there can never
exist a partial version of the file, it's all or nothing.
Conceptually this is a good strategy and it makes good sense
for platforms where it's easy to do a rename within the kernel.
Unfortunately, Linux is not one of those platforms. Even doing
basic I/O to a file system from within the kernel is strongly
discouraged. In order to support this at all the vn_rename()
implementation ends up being complex and fragile. So fragile
that recent Linux 4.2 changes have broken it.
While it is possible to update vn_rename() to work with the
latest kernels a better long term strategy is to stop using
vn_rename() entirely. Then all this complex, fragile code can
be removed. Achieving this is straight forward because
config_write() is the only consumer of vn_rename().
This patch reworks spa_config_write() to update the cache file
in place. The file will be truncated, written out, and then
synced to disk. If an error is encountered the file will be
unlinked leaving the system in a consistent state.
This does expose a tiny tiny tiny window where a system could
crash at exactly the wrong moment could leave a partially written
cache file. However, this is highly unlikely because the cache
file is 1) infrequently updated, 2) only a few kilobytes in size,
and 3) written with a single vn_rdwr() call.
If this were to somehow happen it poses no risk to pool. Simply
removing the cache file will allow the pool to be imported cleanly.
Going forward this will be even less of an issue as we intend to
disable the use of a cache file by default.
Bottom line not using vn_rename() allows us to make ZoL more
robust against upstream kernel changes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3653
Failing to lookup a name in the spa_ddt_stat_object should not result
in a panic in ddt_object_load(). The error can be safely returned to
the caller for handling resulting in a useful user error message.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3370
Without the parenthesis, this particular ASSERT will evaluate to
"(RW_READER == (!zap->zap_ismicro && fatreader)) ? RW_READER : lti"
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3685
This brings the behavior of arc_memory_throttle() back in sync with
illumos. The updated memory throttling policy roughly goes like this:
* Never throttle if more than 10% of memory is free. This threshold
is configurable with the zfs_arc_lotsfree_percent module option.
* Minimize any throttling of kswapd even when free memory is below
the set threshold. Allow it to write out pages as quickly as
possible to help alleviate the memory pressure.
* Delay all other threads when free memory is below the set threshold
in order to avoid compounding the memory pressure. Buffers will be
evicted from the ARC to reduce the issue.
The Linux specific zfs_arc_memory_throttle_disable module option has
been removed in favor of the existing zfs_arc_lotsfree_percent tuning.
Setting zfs_arc_lotsfree_percent=0 will have the same effect as
zfs_arc_memory_throttle_disable and it was therefore redundant.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3637
While Linux doesn't provide detailed information about the state of
the VM it does provide us total free pages. This information should
be incorporated in to the arc_available_memory() calculation rather
than solely relying on a signal from direct reclaim. Conceptually
this brings arc_available_memory() back in sync with illumos.
It is also desirable that the target amount of free memory be tunable
on a system. While the default values are expected to work well
for most workloads there may be cases where custom values are needed.
The zfs_arc_sys_free module option was added for this purpose.
zfs_arc_sys_free - The target number of bytes the ARC should leave
as free memory on the system. This value can
checked in /proc/spl/kstat/zfs/arcstats and
setting this module option will override the
default value.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3637
The zvol_threads module option should be bounded to a reasonable
range. The taskq must have at least 1 thread and shouldn't have
more than 1,024 at most. The default value of 32 is a reasonable
default.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3614
Commit d958324 fixed the deadlock between page lock and range lock by
unlocking the page lock before acquiring the range lock. However,
this created a new issue #3075.
The problem is that if we can't set the write back bit before releasing
the page lock. Then other processes will be unaware that the page is
under active write back. They may therefore truncate the page,
invalidate the page, or not honor the sync semantics.
To workaround this problem we re-dirty the page before dropping the
page lock. While this doesn't prevent the page from being truncated
it does ensure it won't be invalidated. Then the range lock and the
page lock are reacquired in the correct deadlock-free order.
Once both locks are safely held the page state can be rechecked. If
all is well and the page is in the expect state the dirty bit can be
removed, the write back bit set, and the page removed from the skip
count. If not the page will be handled as appropriate.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3075
Under Linux filesystem threads responsible for handling I/O are
normally created with the maximum priority. Non-I/O filesystem
processes run with the default priority. ZFS should adopt the
same priority scheme under Linux to maintain good performance
and so that it will complete fairly when other Linux filesystems
are active. The priorities have been updated to the following:
$ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta'
- TS 10743 19 -20 [spl_kmem_cache]
- TS 10744 19 -20 [spl_system_task]
- TS 10745 19 -20 [spl_dynamic_tas]
- TS 10764 19 0 [dbu_evict]
- TS 10765 19 0 [arc_prune]
- TS 10766 19 0 [arc_reclaim]
- TS 10767 19 0 [arc_user_evicts]
- TS 10768 19 0 [l2arc_feed]
- TS 10769 39 0 [z_unmount]
- TS 10770 39 -20 [zvol]
- TS 11011 39 -20 [z_null_iss]
- TS 11012 39 -20 [z_null_int]
- TS 11013 39 -20 [z_rd_iss]
- TS 11014 39 -20 [z_rd_int_0]
- TS 11022 38 -19 [z_wr_iss]
- TS 11023 39 -20 [z_wr_iss_h]
- TS 11024 39 -20 [z_wr_int_0]
- TS 11032 39 -20 [z_wr_int_h]
- TS 11033 39 -20 [z_fr_iss_0]
- TS 11041 39 -20 [z_fr_int]
- TS 11042 39 -20 [z_cl_iss]
- TS 11043 39 -20 [z_cl_int]
- TS 11044 39 -20 [z_ioctl_iss]
- TS 11045 39 -20 [z_ioctl_int]
- TS 11046 39 -20 [metaslab_group_]
- TS 11050 19 0 [z_iput]
- TS 11121 38 -19 [z_wr_iss]
Note that under Linux the meaning of a processes priority is inverted
with respect to illumos. High values on Linux indicate a _low_ priority
while high value on illumos indicate a _high_ priority.
In order to preserve the logical meaning of the minclsyspri and
maxclsyspri macros when they are used by the illumos wrapper functions
their values have been inverted. This way when changes are merged
from upstream illumos we won't need to remember to invert the macro.
It could also lead to confusion.
This patch depends on https://github.com/zfsonlinux/spl/pull/466.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3607
A NULL should never be passed as the dnode_t pointer to the function
dmu_free_long_range_impl(). Regardless, because we have a reported
occurrence of this let's add some error handling to catch this.
Better to report a reasonable error to caller than panic the system.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3445
Address minor differences in style between upstream and ZoL. This
patch contains no functional differences and is solely designed to
minimize the delta from upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
Commit d962d5d didn't quite properly resolve the HDR_L2ONLY_SIZE
accounting. Accounting is now performed only in the constructor
and destructor which is a nice simplification. It should have
been removed the from create and destroy functions. This brings
up back in sync with upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
Originally removed because it wasn't required under Linux. However,
there may still be some utility in signaling the arc reclaim thread
under Linux via reclaim. This should already have happened by other
means but it's not harmless and reduces another point of divergence
with upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
Commit f521ce1 removed the minimum value for "arc_p" allowing it to
drop to zero or grow to "arc_c". This was done to improve specific
workload which constantly dirties new "metadata" but also frequently
touches a "small" amount of mfu data (e.g. mkdir's).
This change may still be desirable but it needs to be re-investigated.
in the context of the recent ARC changes from upstream. Therefore
this code is being restored to facilitate benchmarking. By setting
"zfs_arc_p_min_shift=64" we easily compare the performance.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
5817 change type of arcs_size from uint64_t to refcount_t
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/5817https://github.com/illumos/illumos-gate/commit/2fd872a
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
5445 Add more visibility via arcstats; specifically arc_state_t
stats and differentiate between "data" and "metadata"
Reviewed by: Basil Crow <basil.crow@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <bayard.bell@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5445https://github.com/illumos/illumos-gate/commit/4076b1b
Porting Notes:
This patch is an improved version of cc7f677 which was previously
merged in ZoL. This patch incorporates the additional improvements
which were made upstream.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5376https://github.com/illumos/illumos-gate/commit/2ec99e3
Porting Notes:
The good news is that many of the recent changes made upstream to the
ARC tackled issues previously observed by ZoL with similar solutions.
The bad news is those solution weren't identical to the ones we applied.
This patch is designed to split the difference and apply as much of the
upstream work as possible.
* The arc_available_memory() function was removed previous in ZoL but
due to the upstream changes it makes sense to add it back. This function
has been customized for Linux so that it can be used to determine a low
memory. This provides the same basic functionality as the illumos version
allowing us to minimize changes through the rest of the code base. The
exact mechanism used to detect a low memory state remains unchanged so
this change isn't a significant as it might first appear.
* This patch includes the long standing fix for arc_shrink() which was
originally proposed in #2167. Since there were related changes to this
function it made sense to include that work.
* The arc_init() function has been re-factored. As before it sets sane
default values for the ARC but then calls arc_tuning_update() to apply
user specific tuning made via module options. The arc_tuning_update()
function is then called periodically by the arc_reclaim_thread() to
apply changes to the tunings made during normal operation.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3616Closes#2167
When an inode is detected with invalid mode bits the safe thing to
do is panic the system. This indicates a problem with the contents
of a dnode and it should never be possible. This is the default
behavior.
Unfortunately, due to flaws in the system attribute (SA) implementation
(on all platforms) it was possible that ZFS could create a damaged dnode.
This was a rare issue which only impacted dnodes which used a spill
block. Normally only symlinks and files with ACLs would require a
spill block. However, if the dataset had the xattr=sa property set
and extended attributes were used this problem could occur.
As of the 0.6.4 tag the root cause of this issue has been fixed. For
pools which are exhibiting this damage the 'zfs_recover=1' module option
may be set. This will cause ZFS to interpret the dnode with invalid
mode bits as a normal file. This may allow the files to be accessed
for recovery purposes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3548
Build products from an out of tree build should be written
relative to the build directory. Sources should be referred
to by their locations in the source directory.
This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile. This enables the following:
$ mkdir build
$ cd build
$ ../configure \
--with-spl=$HOME/src/git/spl/ \
--with-spl-obj=$HOME/src/git/spl/build
$ make -s
This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.
Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
Makefile.am:00: but option 'subdir-objects' is disabled
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1082
After a successful write the inode must be updated under the range
lock. If it is updated after dropping the lock there exists a race
where the znode and inode wile disagree about the file size. This
could result in narrow window of time where read(2) is able to access
data beyond what fstat(2) reports as the file size.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3601
As of Linux 4.2 the kernel has completely retired the nameidata
structure. One of the few remaining consumers of this interface
were the follow_link() and put_link() callbacks.
This patch adds the required checks to configure to detect the
interface change and updates the functions accordingly. Migrating
to the simple_follow_link() interface was considered but was decided
against ironically due to the increased complexity.
It also should be noted that the kernel follow_link() and put_link()
interfaces changes several times after 4.1 and but before 4.2. This
means there is a narrow range of kernel commits which never appear
in an official tag of the Linux kernel which ZoL will not build.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3596
Linux 4.2 commit torvalds/linux@dac5621 renamed bio->bi_cnt to
bio->__bi_cnt. Because this value is only used once in a block of
debug code it simplest just to remove the PANIC. To my knowledge
this debugging has never been hit or proved useful so this is no
great loss.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#3596
Many key internal functions pass system return codes that are safe to
return to userland. In the case of ddi_copyin(9F), an error passes -1
and the documentation states very clearly that drivers should pass
EFAULT to userland when this happens.
http://illumos.org/man/9F/ddi_copyin
This does not happen in the ZFS source code. I believe it should be
changed to pass EFAULT. I caught this when writing man pages for the
libzfs_core API.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3575
Translate zio requests with ZIO_PRIORITY_SYNC_READ and
ZIO_PRIORITY_SYNC_WRITE into synchronous bio requests by setting
READ_SYNC and WRITE_SYNC flags. Specifically, WRITE_SYNC flag turns
out to have a pronounced effect when writing to an SSD-based SLOG.
When WRITE_SYNC is not set (WRITE is set instead), the block trace
for a SLOG device looks as follows:
...
130,96 0 3 0.008968390 0 C W 830464 + 136 [0]
130,96 0 4 0.011999161 0 C W 830720 + 136 [0]
130,96 0 5 0.023955549 0 C W 831744 + 136 [0]
130,96 0 6 0.024337663 19775 A W 832000 + 136 <- (130,97) 829952
130,96 0 7 0.024338823 19775 Q W 832000 + 136 [z_wr_iss/6]
130,96 0 8 0.024340523 19775 G W 832000 + 136 [z_wr_iss/6]
130,96 0 9 0.024343187 19775 P N [z_wr_iss/6]
130,96 0 10 0.024344120 19775 I W 832000 + 136 [z_wr_iss/6]
130,96 0 11 0.026784405 0 UT N [swapper] 1
130,96 0 12 0.026805339 202 U N [kblockd/0] 1
130,96 0 13 0.026807199 202 D W 832000 + 136 [kblockd/0]
130,96 0 14 0.026966948 0 C W 832000 + 136 [0]
130,96 3 1 0.000449358 19788 A W 829952 + 136 <- (130,97) 827904
130,96 3 2 0.000450951 19788 Q W 829952 + 136 [z_wr_iss/19]
130,96 3 3 0.000453212 19788 G W 829952 + 136 [z_wr_iss/19]
130,96 3 4 0.000455956 19788 P N [z_wr_iss/19]
130,96 3 5 0.000457076 19788 I W 829952 + 136 [z_wr_iss/19]
130,96 3 6 0.002786349 0 UT N [swapper] 1
...
Here the 130,197 is the partition created on the log device when adding it
to the pool, whereas the base device is 130,96. As one can see, the writes
to the SLOG are not marked synchronous (the S is missing next to W), and
the queue unplugs occur based on the timer (UT event) resulting in slightly
over 2 msec latency of writes. This results in a sub-par performance of
single stream synchronous writes (limited by latency of the SLOG).
When the WRITE_SYNC is set, a similar trace looks as follows:
...
130,96 4 1 0.000000000 70714 A WS 4280576 + 136 <- (130,97) 4278528
130,96 4 2 0.000000832 70714 Q WS 4280576 + 136 [(null)]
130,96 4 3 0.000002109 70714 G WS 4280576 + 136 [(null)]
130,96 4 4 0.000003394 70714 P N [(null)]
130,96 4 5 0.000003846 70714 I WS 4280576 + 136 [(null)]
130,96 4 6 0.000004854 70714 D WS 4280576 + 136 [(null)]
130,96 5 1 0.000354487 70713 A WS 4280832 + 136 <- (130,97) 4278784
130,96 5 2 0.000355072 70713 Q WS 4280832 + 136 [(null)]
130,96 5 3 0.000356383 70713 G WS 4280832 + 136 [(null)]
130,96 5 4 0.000357635 70713 P N [(null)]
130,96 5 5 0.000358088 70713 I WS 4280832 + 136 [(null)]
130,96 5 6 0.000359191 70713 D WS 4280832 + 136 [(null)]
130,96 0 76 0.000159539 0 C WS 4280576 + 136 [0]
130,96 16 85 0.000742108 70718 A WS 4281088 + 136 <- (130,97) 4279040
130,96 16 86 0.000743197 70718 Q WS 4281088 + 136 [z_wr_iss/15]
130,96 16 87 0.000744450 70718 G WS 4281088 + 136 [z_wr_iss/15]
130,96 16 88 0.000745817 70718 P N [z_wr_iss/15]
130,96 16 89 0.000746705 70718 I WS 4281088 + 136 [z_wr_iss/15]
130,96 16 90 0.000747848 70718 D WS 4281088 + 136 [z_wr_iss/15]
130,96 0 77 0.000604063 0 C WS 4280832 + 136 [0]
130,96 0 78 0.000899858 0 C WS 4281088 + 136 [0]
As one can see, all the writes are synchronous (WS), and I/O completions
(e.g. from issue I to completion C) take 160-250 usec, or about 10x faster.
Since WRITE_SYNC or READ_SYNC flags are among several factors that are
considered when processing bio requests, it seems prudent to mark all the
zio requests of synchronous priority with the READ/WRITE_SYNC flags to make
them eligible for consideration as such by the Linux block I/O layer.
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3529
As of gcc version 5.1.1 a new warning has been added to detect the
use of a boolean in a switch statement (-Wswitch-bool). Resolve the
warning by explicitly casting the value to an integer type.
zfs-0.6.4/module/zfs/zvol.c: In function 'zvol_request':
error: switch condition has boolean value [-Werror=switch-bool]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5661 ZFS: "compression = on" should use lz4 if feature is enabled
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://github.com/illumos/illumos-gate/commit/db1741fhttps://www.illumos.org/issues/5661
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3571
Reclaim during metaslab preloading can cause deadlocks involving znode
z_lock and ARC buffer header ht_lock.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3532.
5008 lock contention (rrw_exit) while running a read only load
Reviewed by: Matthew Ahrens <matthew.ahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Porting notes:
This patch ported perfectly cleanly to ZoL. During testing 100% cached
small-block reads, extreme contention was noticed on rrl->rr_lock from
rrw_exit() due to the frequent entering and leaving ZPL. Illumos picked
up this patch from FreeBSD and it also helps under Linux.
On a 1-minute 4K cached read test with 10 fio processes pinned to a single
socket on a 4-socket (10 thread per socket) NUMA system, contentions on
rrl->rr_lock were reduced from 508799 to 43085.
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3555
5946 zfs_ioc_space_snaps must check that firstsnap and lastsnap refer to snapshots
5945 zfs_ioc_send_space must ensure that fromsnap refers to a snapshot
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
References:
https://www.illumos.org/issues/5946https://www.illumos.org/issues/5945https://github.com/illumos/illumos-gate/commit/24218be
Ported-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3552
5909 ensure that shared snap names don't become too long after promotion
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5909https://github.com/illumos/illumos-gate/commit/cb5842f
Ported-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3550
5912 full stream can not be force-received into a dataset if it has a snapshot
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5912https://github.com/illumos/illumos-gate/commit/5bae108
Ported-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3549
5175 implement dmu_read_uio_dbuf() to improve cached read performance
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5175https://github.com/illumos/illumos-gate/commit/f8554bb
Porting notes:
This patch doesn't include the changes for the COMSTAR (Common
Multiprotocol SCSI Target) - since it's not available for ZoL.
http://thegreyblog.blogspot.co.at/2010/02/setting-up-solaris-comstar-and.html
Ported by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3392
5368 ARC should cache more metadata
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5368https://github.com/illumos/illumos-gate/commit/3a5286a
Porting Notes:
The vast majority of this patch was already merged in the context
of the 06358ea changes. This is just a small hunk which was missed.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
5163 arc should reap range_seg_cache
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5163https://github.com/illumos/illumos-gate/commit/83803b5
Porting Notes:
Added umem_cache_reap_now() wrapped to suppress unused variable
warning for user space build in arc_kmem_reap_now().
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Over the years the default values for the taskqs used on Linux have
differed slightly from illumos. In the vast majority of cases this
was done to avoid creating an obnoxious number of idle threads which
would pollute the process listing.
With the addition of support for dynamic taskqs all multi-threaded
queues should be created as dynamic taskqs. This allows us to get
the best of both worlds.
* The illumos default values for the I/O pipeline can be restored.
These values are known to work well for most workloads. The only
exception is the zio write interrupt taskq which is changed to
ZTI_P(12, 8). At least under Linux more threads has been shown
to improve performance, see commit 7e55f4e.
* Reduces the number of idle threads on the system when it's not
under heavy load. The maximum number of threads will only be
created when they are required.
* Remove the vdev_file_taskq and rely on the system_taskq instead
which is now dynamic and may have up to 64-threads. Again this
brings us back inline with upstream.
* Tasks dispatched with taskq_dispatch_ent() are allowed to use
dynamic taskqs. The Linux taskq implementation supports this.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3507
If we don't account for that, then we might end up overwriting disk
area of buffers that have not been evicted yet, because l2arc_evict
operates in terms of disk addresses.
The discrepancy between the write size calculation and the actual
increment to l2ad_hand was introduced in commit 3a17a7a9.
The change that introduced l2ad_hand alignment was almost correct
as the write size was accumulated as a sum of rounded buffer sizes.
See commit illumos/illumos-gate@e14bb32.
Also, we now consistently use asize / a_sz for the allocated size and
psize / p_sz for the physical size. The latter accounts for a
possible size reduction because of the compression, whereas the
former accounts for a possible subsequent size expansion because of
the alignment requirements.
The code still assumes that either underlying storage subsystems or
hardware is able to do read-modify-write when an L2ARC buffer size is
not a multiple of a disk's block size. This is true for 4KB sector disks
that provide 512B sector emulation, but may not be true in general.
In other words, we currently do not have any code to make sure that
an L2ARC buffer, whether compressed or not, which is used for physical
I/O has a suitable size.
Note that currently the cache device utilization is calculated based
on the physical size, not the allocated size. The same applies to
l2_asize kstat. That is wrong, but this commit does not fix that.
The accounting problem was introduced partially in commit 3a17a7a9
and partially in 3038a2b (accounting became consistent but in favour
of the wrong size).
Porting Notes:
Reworked to be C90 compatible and the 'write_psize' variable was
removed because it is now unused.
References:
https://reviews.csiden.org/r/229/https://reviews.freebsd.org/D2764
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3400Closes#3433Closes#3451
Unit testing at ClusterHQ found that passing an invalid file handle to
zfs_ioc_hold results in a NULL pointer dereference on a system without
assertions:
IP: [<ffffffffa0218aa0>] zfsdev_getminor+0x10/0x20 [zfs]
Call Trace:
[<ffffffffa021b4b0>] zfs_onexit_fd_hold+0x20/0x40 [zfs]
[<ffffffffa0214043>] zfs_ioc_hold+0x93/0xd0 [zfs]
[<ffffffffa0215890>] zfsdev_ioctl+0x200/0x500 [zfs]
An assertion would have caught this had they been enabled, but this is
something that the kernel module should handle without failing. We
resolve this by searching the linked list to ensure that the file
handle's private_data points to a valid zfsdev_state_t.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3506
This seems generally useful. metaslab_aliquot is the ZFS allocation
granularity, which is roughly equivalent to what is called the stripe
size in traditional RAID arrays. It seems relevant to performance
tuning.
Signed-off-by: Etienne Dechamps <etienne@edechamps.fr>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The metaslab allocator device selection algorithm contains a bias
mechanism whose goal is to achieve roughly equal disk space usage across
all top-level vdevs.
It seems that the initial rationale for this code was to allow newly
added (empty) vdevs to "come up to speed" faster in an attempt to make
the pool quickly converge to a steady state where all vdevs are equally
utilized.
While the code seems to work reasonably well for this use case, there
is another scenario in which this algorithm fails miserably: the case
where top-level vdevs don't have the same sizes (capacities). ZFS
allows this, and it is a good feature to have, so that users who simply
want to build a pool with the disks they happen to have lying around can
do so even if the disks have heteregenous sizes.
Here's a script that simulates a pool with two vdevs, with one 4X larger
than the other:
dd if=/dev/zero of=/tmp/d1 bs=1 count=1 seek=134217728
dd if=/dev/zero of=/tmp/d2 bs=1 count=1 seek=536870912
zpool create testspace /tmp/d1 /tmp/d2
dd if=/dev/zero of=/testspace/foobar bs=1M count=256
zpool iostat -v testspace
Before this commit, the script would output the following:
capacity
pool alloc free
---------- ----- -----
testspace 252M 375M
/tmp/d1 104M 18.5M
/tmp/d2 148M 356M
---------- ----- -----
This demonstrates that the current code handles this situation very
poorly: d1 shows 85% usage despite the pool itself being only 40% full.
d1 is quite saturated at this point, and is slowing down the entire pool
due to saturation, fragmentation and the like.
In contrast, here's the result with the code in this commit:
capacity
pool alloc free
---------- ----- -----
testspace 252M 375M
/tmp/d1 56.7M 66.3M
/tmp/d2 195M 309M
---------- ----- ------
This looks much better. d1 is 46% used, which is close to the overall
pool utilization (40%). The code still doesn't result in perfectly
balanced allocation, probably because of the way mg_bias is applied
which does not guarantee perfect accuracy, but this is still much better
than before.
Signed-off-by: Etienne Dechamps <etienne@edechamps.fr>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3389
For kernels which do not implement a per-suberblock shrinker,
those older than Linux 3.1, the shrink_dcache_parent() function
was used to attempt to reclaim dentries. This was found not be
entirely reliable and could lead to performance issues on older
kernels running meta-data heavy workloads.
To address this issue a zfs_sb_prune_aliases() function has been
added to implement this functionality. It relies on traversing
the list of znodes for a filesystem and adding them to a private
list with a reference held. The private list can then be safely
walked outside the z_znodes_lock to prune dentires and drop the
last reference so the inode can be freed.
This provides the same synchronous behavior as the per-filesystem
shrinker and has the advantage of depending on only long standing
interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3501
The number of threads in the iput taskq has been increased to speed
up the number of iputs which can be handled. This has been observed
to improve the meta data reclaim regardless of zfs_sb_prune()
implementation in use.
The taskq has also been renamed z_iput to for consistency with the
rest of the I/O pipeline taskqs which are all named z_*.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Linux 3.15 commit torvalds/linux@293bc98 introduced two new methods.
The ->read_iter() and ->write_iter() methods were designed to replace
the ->aio_read() and ->aio_write() interfaces. Both interfaces were
preserved for several kernel releases in order to migrate all existing
consumers to the new interfaces. But as of Linux 4.1 the legacy
interface has been retired and the ZFS code must be updated to use
the new interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3352
Kernels >= 3.12 have a NUMA-aware superblock shrinker which is used in
ZoL by zfs_sb_prune(). This patch calls the shrinker for each on-line
NUMA node in order that memory be freed for each one.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3495
The Linux kernel watchdog will automatically dump a backtrace for
any process while sleeps for over 120s in an uninterruptible state.
The solution is for the prefetch thread to sleep in an interruptible
state. The way the existing code was written this is safe because
when woken it will always reevaluate its conditional. As a general
rule it is preferable to sleep in an interruptible when possible.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3450Closes#3402
This is the counterpart to zfsonlinux/spl@2345368 which replaces the
cv_wait_interruptible() function with cv_wait_sig(). There is no
functional change to patch merely brings the function names in to
sync to maximize portability.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3450
Issue #3402
ZoL had lowered the minimum ARC size to 4MiB to better accommodate tiny
systems such as the raspberry pi, however, as of addition of large block
support, the arc_adapt() function depends on arc_c being >= 32MiB (2 *
SPA_MAXBLOCKSIZE).
This patch raises the minimum ARC size to 32MiB and adds a VERIFY test
to arc_adapt() for future-proofing.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
As described in the comment above arc_adapt_thread() it is critical
that the arc_adapt_thread() function never sleep while holding a hash
lock. This behavior was possible in the Linux implementation because
the arc_prune() logic was implemented to be synchronous. Under
illumos the analogous dnlc_reduce_cache() function is asynchronous.
To address this the arc_do_user_prune() function is has been reworked
in to two new functions as follows:
* arc_prune_async() is an asynchronous implementation which dispatches
the prune callback to be run by the system taskq. This makes it
suitable to use in the context of the arc_adapt_thread().
* arc_prune() is a synchronous implementation which depends on the
arc_prune_async() implementation but blocks until the outstanding
callbacks complete. This is used in arc_kmem_reap_now() where it
is safe, and expected, that memory will be freed.
This patch additionally adds the zfs_arc_meta_strategy module option
while allows the meta reclaim strategy to be configured. It defaults
to a balanced strategy which has been proved to work well under Linux
but the illumos meta-only strategy can be enabled.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Replace taskq_wait() with taskq_wait_oustanding(). This way callers
will only block until previously submitted tasks have been completed.
This was the previous behavior of task_wait() prior to the introduction
of taskq_wait_outstanding() so this isn't really a functionalty change
for these callers.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Porting notes and other significant code changes:
The illumos 5368 patch (ARC should cache more metadata), which
was never picked up by ZoL, is mostly reverted by this patch.
Since ZoL relies on the kernel asynchronously calling the shrinker to
actually reap memory, the shrinker wakes up arc_reclaim_waiters_cv every
time it runs.
The arc_adapt_thread() function no longer calls arc_do_user_evicts()
since the newly-added arc_user_evicts_thread() calls it periodically.
Notable conflicting ZoL commits which conflicted with this patch or
whose effects are either duplicated or un-done by this patch:
302f753 - Integrate ARC more tightly with Linux
39e055c - Adjust arc_p based on "bytes" in arc_shrink
f521ce1 - Allow "arc_p" to drop to zero or grow to "arc_c"
77765b5 - Remove "arc_meta_used" from arc_adjust calculation
94520ca - Prune metadata from ghost lists in arc_adjust_meta
Trace support for multilist_insert() and multilist_remove() has been
added and produces the following output:
fio-12498 [077] .... 112936.448324: zfs_multilist__insert: ml { offset 240 numsublists 80 sublistidx 63 }
fio-12498 [077] .... 112936.448347: zfs_multilist__remove: ml { offset 240 numsublists 80 sublistidx 29 }
The following arcstats have been removed:
recycle_miss - Used by arcstat.py and arc_summary.py, both of which
have been updated appropriately.
l2_writes_hdr_miss
The following arcstats have been added:
evict_not_enough - Number of times arc_evict_state() was unable to
evict enough buffers to reach its target amount.
evict_l2_skip - Number of times arc_evict_hdr() skipped eviction
because it was being written to the l2arc.
l2_writes_lock_retry - Replaces l2_writes_hdr_miss. Number of times
l2arc_write_done() failed to acquire hash_lock (and re-tries).
arc_meta_min - Shows the value of the zfs_arc_meta_min module
parameter (see below).
The "index" column of the "dbuf" kstat has been removed since it doesn't
have a direct analog in the new multilist scheme. Additional multilist-
related stats could be added in the future but would likely require
extensions to the mulilist API.
The following module parameters have been added:
zfs_arc_evict_batch_limit - Number of ARC headers to free per sub-list
before moving on to the next sub-list.
zfs_arc_meta_min - Enforce a floor on the amount of metadata in
the ARC.
zfs_arc_num_sublists_per_state - Number of multilist sub-lists per
ARC state.
zfs_arc_overflow_shift - Controls amount by which the ARC must exceed
the target size to be considered "overflowing".
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov
5408 managing ZFS cache devices requires lots of RAM
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Porting notes:
Due to the restructuring of the ARC-related structures, this
patch conflicts with at least the following existing ZoL commits:
6e1d7276c9
Fix inaccurate arcstat_l2_hdr_size calculations
The ARC_SPACE_HDRS constant no longer exists and has been
somewhat equivalently replaced by HDR_L2ONLY_SIZE.
e0b0ca983d
Add visibility in to cached dbufs
The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr
struct requires additional structure member names to be used
when referencing the inner items. Also, the presence of L1 or L2
inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR
macros.
Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Porting notes:
ZoL has moved some ARC definitions into arc_impl.h.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Tim Chase <tim@chase2k.com>
This reverts only the l2arc_hdr part of commit
ecf3d9b8e6 in preparation for the illumos
5497 "lock contention on arcs_mtx" patch which does the same thing
but uses the newer two-level ARC structure following the Illumos 5408
"managing ZFS cache devices requires lots of RAM" patch.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Illumos 5497 "lock contention on arcs_mtx" reworks eviction and obviates
the need for this.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit 037763e44e in
preparation for the illumos 5497 "lock contention on arcs_mtx" patch
which includes a fix for this very problem.
ZoL had picked up a subset of the illumos 5497 patch to deal with the
l2arc compression buffer leak.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit 16fcdea363 in preparation
for the illumos 5497 "lock contention on arcs_mtx" patch which eliminates
"marker" within the ARC code.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Commit c3520e7 restructured vdev_add_child() in such a way that
the spa variable was unused during non-debug builds. This is
consistent with the upstream illumos code but because ZoL, unlike
illumos, is built with all compiler warnings enabled this causes
a legitimate warning. Revert this hunk of the patch to keep the
build clean.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3432
5818 zfs {ref}compressratio is incorrect with 4k sector size
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Albert Lee <trisk@omniti.com>
References:
https://www.illumos.org/issues/5818https://github.com/illumos/illumos-gate/commit/81cd5c5
Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3432
5269 zpool import slow
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5269https://github.com/illumos/illumos-gate/commit/12380e1e
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3396
The function dmu_objset_userquota_get_ids() checks and uses dn->dn_bonus
outside of dn_struct_rwlock. If the dnode is being freed then the bonus
dbuf may be in the process of getting evicted. In this case there is a
race that may cause dmu_objset_userquota_get_ids() to access the dbuf
after it has been destroyed. To prevent this, ensure that when we are
using the bonus dbuf we are either holding a reference on it or have
taken dn_struct_rwlock.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3443
- Don't check db->bb_blkid, but use the blkid argument instead.
Checking db->db_blkid may be unsafe since we doesn't yet have a
hold on the dbuf so its validity is unknown.
- Call mutex_exit() on found_db, not db, since it's not certain that
they point to the same dbuf, and the mutex was taken on found_db.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3443
5243 zdb -b could be much faster
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5243https://github.com/illumos/illumos-gate/commit/f7950bf
Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3414
There seems to be a annoying problem using NFSv4 to access ZFS
file systems under certain circumstances. It's easily reproduced:
nfs_client1: mount server:/export /mnt
nfs_client1: cd /mnt
nfs_client1: echo foo >junk
nfs_client1: cat junk
foo
Now on a different NFSv4 client:
nfs_client2: mount server:/export /mnt
nfs_client2: cd /mnt
nfs_client2: vi junk
# Make some changes to /mnt/junk and save
# This change the inode associated with /mnt/junk
Now back to the original client:
nfs_client1: cat junk
cat: junk: No such file or directory
Admittedly NFSv4 is not advertised as a cluster file system that
maintains a completely coherent view of data across multiple nodes.
But it does have some mechanisms built in that try to deal with
situations like the above. Namely, it employs specialized file
handle lookup routines that return ESTALE when a file handle contains
a non-existant inode value. The ESTALE return triggers a return
full file path lookup from the client to determine if the file has
actually gone away or if the cached file handle is no longer valid.
ZFS behavior can be brought into line with other file systems
(e.g., ext4) by applying the following patch:
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3224
Per the documentation for dnode_next_offset in dnode.c, the "txg"
parameter specifies a lower bound on which transaction the dnode can
be found in. We are interested in all dnodes that are removed between
the first and last transaction in the snapshot. It doesn't need to be
created in that snapshot to correspond to a removed file.
In fact, the behavior of zfs diff in the test case exactly matches
this: the transaction that created the data that was deleted in snapshot
"2" was produced before, in snapshot "1", definitely predating the first
transaction in snapshot "2".
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <Tim Chase <tim@onlight.com>
Closes#2081
When ASSERTs are compiled out by using the --disable-debug configure
option. Then the local variable 'dsl_pool_t *dp' will be unused and
generate a compiler warning. Since this variable is only used once
in the ASSERT replace it with 'ds->ds_dir->dd_pool'.
This has the additional advantage of potentially saving a few bytes
on the stack depending on how gcc decides to compile the function.
This issue was not noticed immediately because the automated builders
use --enable-debug to make the testing as rigorous as possible.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Closes#3410
5765 add support for estimating send stream size with lzc_send_space when source is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
References:
https://www.illumos.org/issues/5765https://github.com/illumos/illumos-gate/commit/643da460
Porting notes:
* Unused variable 'recordsize' in dmu_send_estimate() dropped
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3397
5810 zdb should print details of bpobj
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5810https://github.com/illumos/illumos-gate/commit/732885fc
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3387
5351 scrub goes for an extra second each txg
5352 scrub should pause when there is some dirty data
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5351https://github.com/illumos/illumos-gate/commit/6f6a76a
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3383
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5350https://github.com/illumos/illumos-gate/commit/e651831
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3382
Author: Alex Reece <alex@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5422https://github.com/illumos/illumos-gate/commit/a846f19
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3381
The security and ACL operations should all be performed atomically.
To accomplish this there would need to significant invasive changes
made to the common code base. For the moment it's desirable for
compatibility reasons to avoid this. Therefore the code has been
updated to attempt to unwind the operation in case of failure
rather than panic.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2445
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5027https://github.com/illumos/illumos-gate/commit/b515258
Porting Notes:
* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.
* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes. Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.
* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize. This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.
* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX. This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M.
* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space. We should be able to relax
this one the ABD patches are merged.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#354
The metaslab_min_alloc_size option is no longer used in the code.
This functionality was removed by commit f3a7f66 and the module
options should have been dropped at that time.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
With debugging enabled and depending on your kernel config, the size of
arc_buf_hdr_t can blow out the stack of arc_evict() and arc_evict_ghost()
to greater than 1024 bytes. Let's avoid this.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3377
5349 verify that block pointer is plausible before reading
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Xin Li <delphij@FreeBSD.org>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5349https://github.com/illumos/illumos-gate/commit/f63ab3d5
Porting notes:
* Several variable declarations were moved due to C style needs
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3373
By the time we're tearing down our superblock the VFS has started releasing
all our inodes/znodes. Some of this work may have been handed off to our
iput taskq so we need to wait for that work to complete. However the iput
from the taskq can itself result in additional work being added to the
taskq:
dsl_pool_iput_taskq
iput
iput_final
evict
destroy_inode
zpl_inode_destroy
zfs_inode_destroy
zfs_iput_async(ZTOI(zp->z_xattr_parent))
taskq_dispatch(dsl_pool_iput_taskq..., iput, ...)
Let's wait until all our znodes have been released.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3281
5348 zio_checksum_error() only fills in info if ECKSUM
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5348https://github.com/illumos/illumos-gate/commit/373dc1cf
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3372
5808 spa_check_logs is not necessary on readonly pools
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5808https://github.com/illumos/illumos-gate/commit/23367a2f
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3369
5814 bpobj_iterate_impl(): Close a refcount leak iterating on a sublist.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5814https://github.com/illumos/illumos-gate/commit/b67dde11
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3368
4951 ZFS administrative commands should use reserved space, not with ENOSPC
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/4373https://github.com/illumos/illumos-gate/commit/7d46dc6
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
3654 zdb should print number of ganged blocks
3656 remove unused function zap_cursor_move_to_key()
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/3654https://www.illumos.org/issues/3656https://github.com/illumos/illumos-gate/commit/d5ee8a1
Porting Notes:
3655 and 3657 were part of this commit but those hunks were dropped
since they apply to mdb.
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
It's been reported that threads would loop infinitely inside zfs_zget. The
speculated cause for this is that if an inode is marked for evict, zfs_zget
would see that and loop. However, if the looping thread doesn't yield, the
inode may not have a chance to finish evict, thus causing a infinite loop.
This patch solve this issue by add cond_resched to zfs_zget, making the
looping thread to yield when needed.
Tested-by: jlavoy <jalavoy@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3349
5244 zio pipeline callers should explicitly invoke next stage
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5244https://github.com/illumos/illumos-gate/commit/738f37b
Porting Notes:
1. The unported "2932 support crash dumps to raidz, etc. pools"
caused a merge conflict due to a copyright difference in
module/zfs/vdev_raidz.c.
2. The unported "4128 disks in zpools never go away when pulled"
and additional Linux-specific changes caused merge conflicts in
module/zfs/vdev_disk.c.
Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2828
5812 assertion failed in zrl_tryenter(): zr_owner==NULL
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5812https://github.com/illumos/illumos-gate/commit/8df1730
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3357
5592 NULL pointer dereference in dsl_prop_notify_all_cb()
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5592https://github.com/illumos/illumos-gate/commit/9d47dec
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5531 NULL pointer dereference in dsl_prop_get_ds()
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5531https://github.com/illumos/illumos-gate/commit/e57a022
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5056 ZFS deadlock on db_mtx and dn_holds
Author: Justin Gibbs <justing@spectralogic.com>
Reviewed by: Will Andrews <willa@spectralogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5056https://github.com/illumos/illumos-gate/commit/bc9014e
Porting Notes:
sa_handle_get_from_db():
- the original patch includes an otherwise unmentioned fix for a
possible usage of an uninitialised variable
dmu_objset_open_impl():
- Under Illumos list_link_init() is the same as filling a list_node_t
with NULLs, so they don't notice if they miss doing list_link_init()
on a zero'd containing structure (e.g. allocated with kmem_zalloc as
here). Under Linux, not so much: an uninitialised list_node_t goes
"Boom!" some time later when it's used or destroyed.
dmu_objset_evict_dbufs():
- reduce stack usage using kmem_alloc()
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5095 panic when adding a duplicate dbuf to dn_dbufs
Author: Alex Reece <alex@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Mattew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Josef Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5095https://github.com/illumos/illumos-gate/commit/86bb58a
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
4873 zvol unmap calls can take a very long time for larger datasets
Author: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Basil Crow <basil.crow@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/4873https://github.com/illumos/illumos-gate/commit/0f6d88a
Porting Notes:
dbuf_free_range():
- reduce stack usage using kmem_alloc()
- the sorted AVL tree will handle the spill block case correctly
without all the special handling in the for() loop
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3897 zfs filesystem and snapshot limits (fix leak)
Author: Alex Reece <alex.reece@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3897https://github.com/illumos/illumos-gate/commit/fb7001f
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3897 zfs filesystem and snapshot limits
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3897https://github.com/illumos/illumos-gate/commit/a2afb61
Porting Notes:
dsl_dataset_snapshot_check(): reduce stack usage using kmem_alloc().
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In traverse_visitbp(), the input argument dnp is modified in the middle to
point to a temporary buffer. Originally this doesn't matter, because no user
of TRAVERSE_POST dereferences it. However, in fbeddd6 a piece of code is added
dereferencing dnp after the modification, creating a possible bug.
We fix this by creating a new local variable cdnp for the DMU_OT_DNODE case,
so we don't modify the input argument. Also we introduce different local
variables in the DMU_OT_OBJSET case to prevent confusion between the input
argument.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2060
This isn't required for the Linux port because the kernel tracks
if a module is busy. The prototype for spa_busy() is also removed
since its definition was already removed.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3262
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Will Andrews <willa@SpectraLogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5313https://github.com/illumos/illumos-gate/commit/fe319232
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3280
The function spa_add_feature_stats() manipulates the shared nvlist
spa->spa_feat_stats in an unsafe concurrent manner. Add a mutex to
protect the list.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3335
The following panic would occur under certain heavy load:
[ 4692.202686] Kernel panic - not syncing: thread ffff8800c4f5dd60 terminating with rrw lock ffff8800da1b9c40 held
[ 4692.228053] CPU: 1 PID: 6250 Comm: mmap_deadlock Tainted: P OE 3.18.10 #7
The culprit is that ZFS_EXIT(zsb) would call tsd_exit() every time, which
would purge all tsd data for the thread. However, ZFS_ENTER is designed to be
reentrant, so we cannot allow ZFS_EXIT to blindly purge tsd data.
Instead, we rely on the new behavior of tsd_set. When NULL is passed as the
new value to tsd_set, it will automatically remove the tsd entry specified the
the key for the current thread.
rrw_tsd_key and zfs_allow_log_key already calls tsd_set(key, NULL) when
they're done. The zfs_fsyncer_key relied on ZFS_EXIT(zsb) to call tsd_exit() to
do clean up. Now we explicitly call tsd_set(key, NULL) on them.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3247
Additional testing has shown that the region covered by PF_FSTRANS
needs to be extended to cover the zpl_xattr_security_init() and
init_acl() functions. The zpl_mark_dirty() function can also recurse
and therefore must always be protected.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#3331
Prevent deadlocks by disabling direct reclaim during all NFS, xattr,
ctldir, and super function calls. This is related to 40d06e3.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #3225
The Linux slab, in general, performs better than the SPl slab in cases
where a lot of objects are allocated and fragmentation is likely present.
This patch fixes pathologically bad behavior in cases where the ARC is
filled with mostly metadata and a user program needs to allocate and
dirty enough memory which would require an insignificant amount of the
ARC to be reclaimed.
If zfs_znode_cache is on the SPL slab, the system may spin for a very
long time trying to reclaim sufficient memory. If it is on the Linux
slab, the behavior has been observed to be much more predictible; the
memory is reclaimed more efficiently.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3283
The packed nvlist allocated in spa_config_write() may exceed the
warning threshold for large configurations. Use the vmem interfaces
for this short lived allocation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3251
Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl
calls as well as the l2arc and adapt ARC threads.
This obviates the need for MUTEX_FSTRANS so its previous uses and
definition have been eliminated.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3225
5693 ztest fails in dbuf_verify: buf[i] == 0, due to dedup and bp_override
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5693https://github.com/illumos/illumos-gate/commit/7f7ace3
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3231
5694 traverse_prefetcher does not prefetch enough
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/5694https://github.com/illumos/illumos-gate/commit/34d7ce05
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3230
Align code in traverse_visitbp() with that in Illumos in preparation for
applying Illumos-5694.
No functional change: use a temporary variable pd to replace multiple
occurrences of td->td_pfd. This increases our stack use slightly more
then normal because the function is called recursively.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3230
5695 dmu_sync'ed holes do not retain birth time
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5695https://github.com/illumos/illumos-gate/commit/70163ac
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3229
When called to free a spill block from a dnode, dbuf_free_range() has a
bug that results in all dbufs for the dnode getting freed. A variety of
problems may result from this bug, but a common one was a zap lookup
tripping an ASSERT because the zap buffers had been zeroed out. This
could happen on a dataset with xattr=sa set when extended attributes are
written and removed on a directory concurrently with I/O to files in
that directory.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes#3195Fixes#3204Fixes#3222
ZoL had been setting max_sectors to UINT_MAX, but until Linux 3.19, it
the kernel artifically capped it at 1024 (BLK_DEF_MAX_SECTORS).
This cap was removed in torvalds/linux@34b48db. This patch changes
it to DMU_MAX_ACCESS (in sectors) and also changes the ASSERT in
dmu_tx_hold_write() to allow the maximum transfer size.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3212
The zio_inject.c keeps zio_injection_enabled as a counter of
fault handlers, so it should not be exported to user space as
a module option.
Several EXPORT_SYMBOLs are moved from zio.c to zio_inject.c,
where the symbols are defined.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3199
zfs_sb_t has grown to the point where using kmem_zalloc() for allocations
is triggering the 32k warning threshold.
We can't safely convert this entire allocation to use vmem_alloc() instead
of kmem_alloc() because the backing_dev_info structure is embedded here.
It depends on the bit_waitqueue() function which won't behave properly
when given a virtual address.
Instead, use vmem_alloc() to allocate the z_hold_mtx array separately.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#3178
The goal of this function is to evict enough meta data buffers from the
ARC in order to enforce the arc_meta_limit. Achieving this is slightly
more complicated than it appears because it is common for data buffers
to have holds on meta data buffers. In addition, dnode meta data buffers
will be held by the dnodes in the block preventing them from being freed.
This means we can't simply traverse the ARC and expect to always find
enough unheld meta data buffer to release.
Therefore, this function has been updated to make alternating passes
over the ARC releasing data buffers and then newly unheld meta data
buffers. This ensures forward progress is maintained and arc_meta_used
will decrease. Normally this is sufficient, but if required the ARC
will call the registered prune callbacks causing dentry and inodes to
be dropped from the VFS cache. This will make dnode meta data buffers
available for reclaim. The number of total restarts in limited by
zfs_arc_meta_adjust_restarts to prevent spinning in the rare case
where all meta data is pinned.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Issue #3160
Originally when the ARC prune callback was introduced the idea was
to register a single callback for the ZPL. The ARC could invoke this
call back if it needed the ZPL to drop dentries, inodes, or other
cache objects which might be pinning buffers in the ARC. The ZPL
would iterate over all ZFS super blocks and perform the reclaim.
For the most part this design has worked well but due to limitations
in 2.6.35 and earlier kernels there were some problems. This patch
is designed to address those issues.
1) iterate_supers_type() is not provided by all kernels which makes
it impossible to safely iterate over all zpl_fs_type filesystems in
a single callback. The most straight forward and portable way to
resolve this is to register a callback per-filesystem during mount.
The arc_*_prune_callback() functions have always supported multiple
callbacks so this is functionally a very small change.
2) Commit 050d22b removed the non-portable shrink_dcache_memory()
and shrink_icache_memory() functions and didn't replace them with
equivalent functionality. This meant that for Linux 3.1 and older
kernels the ARC had no mechanism to drop dentries and inodes from
the caches if needed. This patch adds that missing functionality
by calling shrink_dcache_parent() to release dentries which may be
pinning inodes. This will result in all unused cache entries being
dropped which is a bit heavy handed but it's the only interface
available for old kernels.
3) A zpl_drop_inode() callback is registered for kernels older than
2.6.35 which do not support the .evict_inode callback. This ensures
that when the last reference on an inode is dropped it is immediately
removed from the cache. If this isn't done than inode can end up on
the global unused LRU with no mechanism available to ZFS to drop them.
Since the ARC buffers are not dropped the hottest inodes can still
be recreated without performing disk IO.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Issue #3160
The arc_meta_max value should be increased when space it consumed not when
it is returned. This ensure's that arc_meta_max is always up to date.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Issue #3160
5630 stale bonus buffer in recycled dnode_t leads to data corruption
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5630https://github.com/illumos/illumos-gate/commit/cd485b4
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3172
5047 don't use atomic_*_nv if you discard the return value
Author: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Jason King <jason.brian.king@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5047https://github.com/illumos/illumos-gate/commit/640c167
Porting Notes:
Several hunks from the original patch where not specific to ZFS
and thus were dropped.
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3172
Allowing direct reclaim to re-enter the VFS in the zfs_inactive()
call path has historically been problematic for ZoL. Therefore,
in order to avoid an entire class of current and future issues
caused by this PF_FSTRANS is set for all zfs_inactive() callers.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3163
Avoid issuing I/O to the pool when retrieving feature flags information.
Trying to read the ZAPs from disk means that zpool clear would hang if
the pool is suspended and recovery would require a reboot. To keep the
feature stats resident in memory, we hang a cached nvlist off of the
spa. It is built up from disk the first time spa_add_feature_stats() is
called, and refreshed thereafter using the cached feature reference
counts. spa_add_feature_stats() gets called at pool import time so we
can be sure the cached nvlist will be available if the pool is later
suspended.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3082
There are a handful of ASSERT(!"...")'s throughout the code base for
cases which should be impossible. This patch converts them to use
cmn_err(CE_PANIC, ...) to ensure they are always enabled and so that
additional debugging is logged if they were to occur.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1445
The 'capabilities' argument which was passed to bdi_setup_and_register()
has been removed. File systems should no longer pass BDI_CAP_MAP_COPY.
For our purposes this means there are now three different interfaces
which must be handled. A zpl_bdi_setup_and_register() wrapper function
has been introduced to provide a single interface to the ZPL code.
* 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported.
* 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments.
* 4.0 - x.y, bdi_setup_and_register() takes 2 arguments.
I've also taken this opportunity to remove HAVE_BDI because kernels
older then 2.6.32 are no longer supported. All kernels newer than
this will have one of the above interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#3128
There are regions in the ZFS code where it is desirable to be able
to be set PF_FSTRANS while a specific mutex is held. The ZFS code
could be updated to set/clear this flag in all the correct places,
but this is undesirable for a few reasons.
1) It would require changes to a significant amount of the ZFS
code. This would complicate applying patches from upstream.
2) It would be easy to accidentally miss a critical region in
the initial patch or to have an future change introduce a
new one.
Both of these concerns can be addressed by using a new mutex type
which is responsible for managing PF_FSTRANS, support for which was
added to the SPL in commit zfsonlinux/spl@9099312 - Merge branch
'kmem-rework'.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3050Closes#3055Closes#3062Closes#3132Closes#3142Closes#2983
Pool reference count is NOT checked in spa_export_common()
if the pool has been imported readonly=on, i.e. spa->spa_sync_on
is FALSE. Then zpool export and zfs list may deadlock:
1. Pool A is imported readonly.
2. zpool export A and zfs list are run concurrently.
3. zfs command gets reference on the spa, which holds a dbuf on
on the MOS meta dnode.
4. zpool command grabs spa_namespace_lock, and tries to evict dbufs
of the MOS meta dnode. The dbuf held by zfs command can't be
evicted as its reference count is not 0.
5. zpool command blocks in dnode_special_close() waiting for the
MOS meta dnode reference count to drop to 0, with
spa_namespace_lock held.
6. zfs command tries to get the spa_namespace_lock with a reference
on the spa held, which holds a dbuf on the MOS meta dnode.
7. Now zpool command and zfs command deadlock each other.
Also any further zfs/zpool command will block on spa_namespace_lock
forever.
The fix is to always check pool reference count in spa_export_common(),
no matter whether the pool was imported readonly or not.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2034
Cleanly destroying or exporting a pool requires that the pool
not be suspended. Therefore, set the POOL_CHECK_SUSPENDED flag
for these ioctls so the utilities will output a descriptive
error message rather than block.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2878
In the original implementation of the SPL wrappers were provided
for module initialization and cleanup. This was done to abstract
away any compatibility code which might be needed for the SPL.
As it turned out the only significant compatibility issue was that
the default pwd during module load differed under Illumos and Linux.
Since this is such as minor thing and the wrappers complicate the
code they are being retired.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2985
As described in flags section of open(2):
O_APPEND:
The file is opened in append mode. Before each write(2), the
file offset is positioned at the end of the file, as if with
lseek(2). O_APPEND may lead to corrupted files on NFS filesys-
tems if more than one process appends data to a file at once.
This is because NFS does not support appending to a file, so the
client kernel has to simulate it, which can't be done without a
race condition.
This issue was originally overlooked because normally the generic
VFS code handles this for a filesystem. However, because ZFS explictly
registers a zpl_write() function it's responsible for the seek.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3124
When loading the ZFS kernel modules they should not populate the
spa namespace using the cache file. This behavior isn't consistent
with other Linux kernel modules and we need to move away from it.
Removing this makes the whole startup process predictable with four
basic steps which are driven by the init system.
1) modprobe
2) zpool import
3) zfs mount
4) zfs share
This change also helps lay the groundwork for eventually removing
the kobj_* compatibility code on the kernel side. It may need to
be preserved in userspace because libzfs_init() depends on it.
This is why the conditional must be wrapped with an #ifdef _KERNEL.
Signed-off-by: Dan Swartzendruber <dswartz@druber.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2820
When a bad DVA is encountered in metaslab_free_dva() the system
should treat it as fatal. This indicates that somehow a damaged
DVA was written to disk and that should be impossible.
However, we have seen a handful of reports over the years of pools
somehow being damaged in this way. Since this damage can render
otherwise intact pools unimportable, and the consequence of skipping
the bad DVA is only leaked free space, it makes sense to provide
a mechanism to ignore the bad DVA. Setting the zfs_recover=1 module
option will cause the DVA to be ignored which may allow the pool to
be imported.
Since zfs_recover=0 by default any pool attempting to free a bad DVA
will treat it as a fatal error preserving the current behavior.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3099
Issue #3090
Issue #2720
dmu_snapshot_list_next stores the index of the next snapshot entry to the offp
argument, which zpl_snapdir_iterate then uses for the dir_emit. This
result in an off-by-one error. Therefore a temporary variable should be
used.
This was a regression introduced in commit zfsonlinux/zfs@0f37d0c.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2930
The zio_cons() constructor and zio_dest() destructor don't exist
in the upstream Illumos code. They were introduced as a workaround
to avoid issue #2523. Since this issue has now been resolved this
code is being reverted to bring ZoL back in sync with Illumos.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #3063
Long ago the zio_bulk_flags module parameter was introduced to
facilitate debugging and profiling the zio_buf_caches. Today
this code works well and there's no compelling reason to keep
this functionality. In fact it's preferable to revert this so
the code is more consistent with other ZFS implementations.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #3063
struct access f->f_dentry->d_inode was replaced by accessor function
file_inode(f)
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3084
Several of the nvlist functions may perform allocations larger than
the 32k warning threshold. Convert them to use vmem_alloc() so the
best allocator is used.
Commit efcd79a retired KM_NODEBUG which was used to suppress large
allocation warnings. Concurrently the large allocation warning threshold
was increased from 8k to 32k. The goal was to identify the remaining
locations, such as this one, where the allocation can be larger than
32k. This patch is expected fine tuning resulting for the kmem-rework
changes, see commit 6e9710f.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3057Closes#3079Closes#3081
Normally when importing a pool the space maps for all top level
vdevs are read from disk. The space maps will be required latter
when an allocation is performed and free blocks need to be located.
However, if the pool is imported readonly then we are guaranteed
that no allocations can occur. In this case the space maps need
not be loaded.. A similar argument can be made for the DTLs
(dirty time logs).
Because a pool import will fail if the space maps cannot be read.
The ability to safely ignore them makes it more likely that a
damaged pool can be imported readonly to recover its contents.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2831
5311 traverse_dnode may report success when it should not
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Will Andrews <willa@spectralogic.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://github.com/illumos/illumos-gate/commit/2a89c2chttps://www.illumos.org/issues/5311
Ported by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2970
The functions sa_find_sizes() and sa_build_layout() fail to account
for the additional 2 bytes of SA header space when calculating whether
a variable size attribute might spill over. They may consequently
determine that an attribute will fit in the bonus buffer along with a
spill block pointer, when in reality the attribute would be partially
overwritten by the spill block pointer if spill over occurs. This also
causes an inconsistency between the SA header size and the number of
variable size attributes in the layout, tripping an assertion when
debugging is on. The following reproducer demonstrates the problem.
ln -s $(perl -e 'print "z" x 20') file
setfattr -h -n trusted.foo -v $(perl -e 'print "z" x 200') file
Even though sa_find_sizes() computes the index of the attribute where
spill-over will occur, sa_build_layouts() discards the result and
recomputes it itself. As it turns out, both functions get it wrong.
Since this computation is awkward and, as history has shown, easy to
screw up, let's just do it in one place. This patch fixes the bug in
sa_find_sizes() and updates sa_build_layout() to use the result
computed there.
Also improve the comments in sa_find_sizes().
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3070
When a dbuf is in the DB_EVICTING state it may no longer be on the
dn_dbufs list. In which case it's unsafe to call DB_DNODE_ENTER.
Therefore, any dbuf which is found in this safe must be skipped.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2553Closes#2495
Commit 7b2d78a046 fixed some improper uses
of snprintf(), however, in __dbuf_stats_hash_table_data() the return
value of snprintf is propagated to the caller. This caused spurious
ENOMEM errors when reading the dbufs kstat.
This commit causes the actual number of characters written to be returned.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3072
Commit log from FreeBSD:
We have observed that arc_release() can be called concurrently with a
l2arc in-flight write. Also, we have observed that arc_hdr_destroy()
can be called from arc_write_done() for a zio with ZIO_FLAG_IO_REWRITE
flag in similar circumstances.
Previously the l2arc headers would be freed while leaking their
associated compression buffers. Now the buffers are placed on
l2arc_free_on_write list for delayed freeing. This is similar to
what was already done to arc buffers that were supposed to be freed
concurrently with in-flight writes of those buffers.
In addition to fixing the discovered leaks this change also adds
some protective code to assert that a compression buffer associated
with a l2arc header is never leaked.
A new kstat l2_cdata_free_on_write is added. It keeps a count
of delayed compression buffer frees which previously would have
been leaks.
Tested by: Vitalij Satanivskij <satan@ukr.net> et al
Requested by: many
MFC after: 2 weeks
Sponsored by: HybridCluster / ClusterHQ
References:
https://illumos.org/issues/5222https://github.com/freebsd/freebsd/commit/b98f85dhttp://thread.gmane.org/gmane.os.freebsd.current/155757/focus=155781http://lists.open-zfs.org/pipermail/developer/2014-January/000455.htmlhttp://lists.open-zfs.org/pipermail/developer/2014-February/000523.html
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3029
The zil_itx_create() function uses the vmem_alloc() allocator for
its buffers because when logging a write that buffer may be as large
as 64K. This is non-optimal because we may need to allocate many of
of these buffers and this interface has the potential to be slow.
Instead, use zio_data_buf_alloc() which is specifically designed to
be able to efficiently allocate a wide range of buffer sizes.
In addition, do some cleanup and use the zil_itx_destroy() function
to always free an itx structure. This way we're always sure the
right allocation functions are used. Notice that in the current
code kmem_free() and vmem_free() were both used. This happened to
work because these wrappers map to the same internal SPL function.
This was identified as a potential problem when a low-end memory
constrained system began logging the following warnings. There
was no deadlock here just repeated allocation failures resulting
in increased latency.
Possible memory allocation deadlock: size=65792 lflags=0x42d0
Pid: 20118, comm: kvm Tainted: P O 3.2.0-0.bpo.4-amd64
Call Trace:
[<ffffffffa040b834>] ? spl_kmem_alloc_impl+0x115/0x127 [spl]
[<ffffffffa040b84f>] ? spl_kmem_alloc_debug+0x9/0x36 [spl]
[<ffffffffa05d8a0b>] ? zil_itx_create+0x2d/0x59 [zfs]
[<ffffffffa05c71e6>] ? zfs_log_write+0x13a/0x2f0 [zfs]
[<ffffffffa05d41bc>] ? zfs_write+0x85b/0x9bb [zfs]
[<ffffffffa05e37ec>] ? zpl_aio_write+0xca/0x110 [zfs]
[<ffffffff811088e5>] ? do_sync_readv_writev+0xa3/0xde
[<ffffffff81108f41>] ? do_readv_writev+0xaf/0x125
[<ffffffff81109055>] ? sys_pwritev+0x55/0x9a
[<ffffffff813721d2>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#3059
Thank to commit a4430fce69 we're
now correctly returning EROFS when opening a zvol on a read-only
pool. Unfortunately, it looks like this causes us to trigger
some unexpected behavior by __blkdev_get().
In the failure case it's possible __blkdev_get() will call
__blkdev_put() for a bdev which was never successfully opened.
This results in us trying to close the device again and hitting
the NULL dereference.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1343
Rather than ASSERT when for some reason the readonly property of
a zvol can't be read cleanly handle the failure.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1343
The sa_modify_attrs() function can add, remove or replace an SA.
The main loop in the function uses the index "i" to iterate over the
existing SAs and uses the index "j" for writing them into a new buffer
via SA_ADD_BULK_ATTR(). The write index, "j" is incremented on remove
(SA_REMOVE) operations which leads to a corruption in the new SA buffer.
This patch remove the increment for SA_REMOVE operations.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3028
An attempt to debug zfsonlinux/zfs#2781 revealed that this code could be
simplified by using kmem_asprintf(). It is not clear that switching to
kmem_asprintf() addresses zfsonlinux/zfs#2781. However, switching to
kmem_asprintf() is cleanup that simplifies debugging such that it would
become clear that this is a bug in glibc should the issue persist.
It also brings this function almost back in sync with Illumos. This
was possible due to the recently reworked kmem code which allows us
to use KM_SLEEP in the same fashion as Illumos.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2791
Issue #2781
The split count/scan shrinker callbacks introduced in 3.12 broke the
test for HAVE_SHRINK, effectively disabling the per-superblock shrinkers.
This patch re-enables the per-superblock shrinkers when the split shrinker
callbacks have been detected.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2975
The SA spill_cache was originally introduced to avoid the need to
perform large kmem or vmem allocations. Instead a small dedicated
cache of preallocated SA buffers was kept.
This solution was viable while the maximum block size was limited
to 128K. But with the planned increase of the maximum block size
to 16M callers need to migrate to the zio_buf_alloc(). However,
they should be aware this interface is expected to change again
once the zio buffers are fully backed by scatter-gather lists.
Alternately, if the callers know these buffers will never be large
or be infrequently accessed they may kmem_alloc() or vmem_alloc()
the needed temporary space.
This change has the additional benegit of bringing the code back
inline with the upstream Illumos source.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Commit 86dd0fd added preallocated I/O buffers. This is no longer
required after the recent kmem changes designed to make our memory
allocation interfaces behave more like those found on Illumos. A
deadlock in this situation is no longer possible.
However, these allocations still have the potential to be expensive.
So a potential future optimization might be to perform then KM_NOSLEEP
so that they either succeed of fail quicky. Either case is acceptable
here because we can safely abort the aggregation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
By marking DMU transaction processing contexts with PF_FSTRANS
we can revert the KM_PUSHPAGE -> KM_SLEEP changes. This brings
us back in line with upstream. In some cases this means simply
swapping the flags back. For others fnvlist_alloc() was replaced
by nvlist_alloc(..., KM_PUSHPAGE) and must be reverted back to
fnvlist_alloc() which assumes KM_SLEEP.
The one place KM_PUSHPAGE is kept is when allocating ARC buffers
which allows us to dip in to reserved memory. This is again the
same as upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Callers of kmem_alloc() which passed the KM_NODEBUG flag to suppress
the large allocation warning have been replaced by vmem_alloc() as
appropriate. The updated vmem_alloc() call will not print a warning
regardless of the size of the allocation.
A careful reader will notice that not all callers have been changed
to vmem_alloc(). Some have only had the KM_NODEBUG flag removed.
This was possible because the default warning threshold has been
increased to 32k. This is desirable because it minimizes the need
for Linux specific code changes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The initial port of ZFS to Linux required a way to identify virtual
memory to make IO to virtual memory backed slabs work, so kmem_virt()
was created. Linux 2.6.25 introduced is_vmalloc_addr(), which is
logically equivalent to kmem_virt(). Support for kernels before 2.6.26
was later dropped and more recently, support for kernels before Linux
2.6.32 has been dropped. We retire kmem_virt() in favor of
is_vmalloc_addr() to cleanup the code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In order to avoid deadlocking in the IO pipeline it is critical that
pageout be avoided during direct memory reclaim. This ensures that
the pipeline threads can always make forward progress and never end
up blocking on a DMU transaction. For this very reason Linux now
provides the PF_FSTRANS flag which may be set in the process context.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is a follow up commit to 74328ee which correctly resolved a lock
inversion between zfs_putpage() and zfs_free_range(). Unfortunately,
in the process it accidentally introduced another inversion between
zfs_putpage() and zfs_read(). The page must be unlocked before taking
the range lock. This patch corrects that issue.
In addition, because the locking rules here are subtle a block comment
has been added clearly explaining why the ordering here is critical.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #2976
Add a table describing the debugging flags that can be set in the zfs_flags
module parameter. Also change the module_param type to 'uint' so users aren't
shown a negative value. The updated man page text is reproduced below for
convenience.
zfs_flags (int)
Set additional debugging flags. The following flags may be
bitwise-or'd together.
+-------------------------------------------------------+
|Value Symbolic Name |
| Description |
+-------------------------------------------------------+
| 1 ZFS_DEBUG_DPRINTF |
| Enable dprintf entries in the debug log. |
+-------------------------------------------------------+
| 2 ZFS_DEBUG_DBUF_VERIFY * |
| Enable extra dbuf verifications. |
+-------------------------------------------------------+
| 4 ZFS_DEBUG_DNODE_VERIFY * |
| Enable extra dnode verifications. |
+-------------------------------------------------------+
| 8 ZFS_DEBUG_SNAPNAMES |
| Enable snapshot name verification. |
+-------------------------------------------------------+
| 16 ZFS_DEBUG_MODIFY |
| Check for illegally modified ARC buffers. |
+-------------------------------------------------------+
| 32 ZFS_DEBUG_SPA |
| Enable spa_dbgmsg entries in the debug log. |
+-------------------------------------------------------+
| 64 ZFS_DEBUG_ZIO_FREE |
| Enable verification of block frees. |
+-------------------------------------------------------+
| 128 ZFS_DEBUG_HISTOGRAM_VERIFY |
| Enable extra spacemap histogram verifications. |
+-------------------------------------------------------+
* Requires debug build.
Default value: 0.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2988
Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate
typedef declarations with the same type. The trace.h header contains
some typedefs to avoid 'unknown type' errors for C files that haven't
declared the type in question. But this causes build failures for C
files that have already declared the type. Newer versions of GCC (e.g.
v4.6) allow duplicate typedefs with the same type unless pedantic error
checking is in force. To support the older versions we need to remove
the duplicate typedefs.
Removal of the typedefs means we can't built tracepoints code using
those types unless the required headers have been included. To
facilitate this, all tracepoint event declarations have been moved out
of trace.h into separate headers. Each new header is explicitly included
from the C file that uses the events defined therein. The trace.h header
is still indirectly included form zfs_context.h and provides the
implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces.
This makes those interfaces readily available throughout the code base.
The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also
still provided by trace.h, so it is a prerequisite for the other
trace_*.h headers.
These new Linux implementation-specific headers do introduce a small
divergence from upstream ZFS in several core C files, but this should
not present a significant maintenance burden.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2953
There exists a lock inversions involving the zfs range lock and the
individual page writeback bits which can result in a deadlock. To
prevent this we must always manipulate the writeback bit while
holding the range lock. The exact deadlock is as follows:
------ Process A ------ ------ Process B ------
zpl_writepages zpl_fallocate
write_cache_pages zpl_fallocate_common
zpl_putpage zfs_space
zfs_putpage (set bit) zfs_freesp
zfs_range_lock (wait on lock) zfs_free_range (take lock)
[has not yet initiated I/O, truncate_inode_pages_range
the bit will not be cleared] wait_on_page_writeback (wait on bit)
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Issue #2976
Filesystems which are mounted read-only or are immutable because
they are snapshots must not be allowed to dirty and inode. This
will result in a write which will correctly cause a kernel panic
because these filesystem are (and must be) immutable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2812
Mark the error handling branch as unlikely() because the current
kernel interface can never return NULL. However, we want to keep
the error handling in case this behavior changes in the futre.
Plus fix a small style issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#2703
Inclusion of SPL compatibility headers was moved out of the public
header sys/types.h to avoid conflicts with external packages. Include a
few compatiblity headers explicitly to cope with that change. Also,
sort some linux-specific inclusions alphabetically.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2898
Fix a few cases where null-byte termination of strings was done
unnecessarily or incorrectly.
- The snprintf() function always produces a null-byte terminated string
for non-negative return values, so it is not necessary to write out a
null-byte as a separate step.
- Also, it is unsafe to use the return value of snprintf() as an offset
for placing a null-byte, because if the output was truncated the return
value is the number of bytes that _would_ have been written had enough
space been available. Therefore the return value may index beyond the
array boundaries.
- Finally, snprintf() accounts for the null-byte when limiting its output
size, so there is no need to pass it a size parameter that is one less
than the buffer size.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2875
When processing async destroys ZFS would leak space every txg timeout
(5 seconds by default), if no writes occurred, until the pool is totally
full. At this point it would be unfixable without a pool recreation.
In addition if the machine was rebooted with the pool in this situation
would fail to import on boot, hanging indefinitely, as the import process
requires the ability to write data to the pool. Any attempts to query
the pool status during the hung import would not return as the import
holds the pool lock.
The only way to import such a pool would be to specify -o readonly=on
to the zpool import.
zdb -bb <pool> can be used to check for "deferred free" size which is
where this lost space will be counted.
References:
https://github.com/freebsd/freebsd/commit/48431b7http://svnweb.freebsd.org/base?view=revision&revision=273158https://reviews.csiden.org/r/132/
Porting notes:
This issue was filed as illumos 5347 and a more comprehensive fix is
under review. Once that change is finalized it will be integrated, in
the meanwhile the FreeBSD fix has been merged to prevent the issue.
Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Matthew Ahrens mahrens@delphix.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2896
If a spill block's dbuf hasn't yet been written when a spill block is
freed, the unwritten version will still be written. This patch handles
the case in which a spill block's dbuf is freed and undirties it to
prevent it from being written.
The most common case in which this could happen is when xattr=sa is being
used and a long xattr is immediately replaced by a short xattr as in:
setfattr -n user.test -v very_very_very..._long_value <file>
setfattr -n user.test -v short_value <file>
The first value must be sufficiently long that a spill block is generated
and the second value must be short enough to not require a spill block.
In practice, this would typically happen due to internal xattr operations
as a result of setting acltype=posixacl.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2663Closes#2700Closes#2701Closes#2717Closes#2863Closes#2884
This patch leverages Linux tracepoints from within the ZFS on Linux
code base. It also refactors the debug code to bring it back in sync
with Illumos.
The information exported via tracepoints can be used for a variety of
reasons (e.g. debugging, tuning, general exploration/understanding,
etc). It is advantageous to use Linux tracepoints as the mechanism to
export this kind of information (as opposed to something else) for a
number of reasons:
* A number of external tools can make use of our tracepoints
"automatically" (e.g. perf, systemtap)
* Tracepoints are designed to be extremely cheap when disabled
* It's one of the "accepted" ways to export this kind of
information; many other kernel subsystems use tracepoints too.
Unfortunately, though, there are a few caveats as well:
* Linux tracepoints appear to only be available to GPL licensed
modules due to the way certain kernel functions are exported.
Thus, to actually make use of the tracepoints introduced by this
patch, one might have to patch and re-compile the kernel;
exporting the necessary functions to non-GPL modules.
* Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux
tracepoints are not available for unsigned kernel modules
(tracepoints will get disabled due to the module's 'F' taint).
Thus, one either has to sign the zfs kernel module prior to
loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or
newer.
Assuming the above two requirements are satisfied, lets look at an
example of how this patch can be used and what information it exposes
(all commands run as 'root'):
# list all zfs tracepoints available
$ ls /sys/kernel/debug/tracing/events/zfs
enable filter zfs_arc__delete
zfs_arc__evict zfs_arc__hit zfs_arc__miss
zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone
zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write
zfs_new_state__mfu zfs_new_state__mru
# enable all zfs tracepoints, clear the tracepoint ring buffer
$ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable
$ echo 0 > /sys/kernel/debug/tracing/trace
# import zpool called 'tank', inspect tracepoint data (each line was
# truncated, they're too long for a commit message otherwise)
$ zpool import tank
$ cat /sys/kernel/debug/tracing/trace | head -n35
# tracer: nop
#
# entries-in-buffer/entries-written: 1219/1219 #P:8
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr...
z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr...
z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr...
z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr...
z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr...
z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr...
z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru...
lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr...
z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru...
lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ...
To highlight the kind of detailed information that is being exported
using this infrastructure, I've taken the first tracepoint line from the
output above and reformatted it such that it fits in 80 columns:
lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss:
hdr {
dva 0x1:0x40082
birth 15491
cksum0 0x163edbff3a
flags 0x640
datacnt 1
type 1
size 2048
spa 3133524293419867460
state_type 0
access 0
mru_hits 0
mru_ghost_hits 0
mfu_hits 0
mfu_ghost_hits 0
l2_hits 0
refcount 1
} bp {
dva0 0x1:0x40082
dva1 0x1:0x3000e5
dva2 0x1:0x5a006e
cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00
lsize 2048
} zb {
objset 0
object 0
level -1
blkid 0
}
For the specific tracepoint shown here, 'zfs_arc__miss', data is
exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and
zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!).
This kind of precise and detailed information can be extremely valuable
when trying to answer certain kinds of questions.
For anybody unfamiliar but looking to build on this, I found the XFS
source code along with the following three web links to be extremely
helpful:
* http://lwn.net/Articles/379903/
* http://lwn.net/Articles/381064/
* http://lwn.net/Articles/383362/
I should also node the more "boring" aspects of this patch:
* The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to
support a sixth paramter. This parameter is used to populate the
contents of the new conftest.h file. If no sixth parameter is
provided, conftest.h will be empty.
* The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced.
This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro,
except it has support for a fifth option that is then passed as
the sixth parameter to ZFS_LINUX_COMPILE_IFELSE.
These autoconf changes were needed to test the availability of the Linux
tracepoint macros. Due to the odd nature of the Linux tracepoint macro
API, a separate ".h" must be created (the path and filename is used
internally by the kernel's define_trace.h file).
* The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This
is to determine if we can safely enable the Linux tracepoint
functionality. We need to selectively disable the tracepoint code
due to the kernel exporting certain functions as GPL only. Without
this check, the build process will fail at link time.
In addition, the SET_ERROR macro was modified into a tracepoint as well.
To do this, the 'sdt.h' file was moved into the 'include/sys' directory
and now contains a userspace portion and a kernel space portion. The
dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as
well.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix a few dprintf format specifiers that disagreed with their argument
types. These came to light as compiler errors when converting dprintf
to use the Linux trace buffer. Previously this wasn't a problem,
presumably because the SPL debug logging uses vsnprintf which must
perform automatic type conversion.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add a new file named arc_impl.h and move a few internal
ARC structure definitions into this file. This is
needed in order to allow the Linux tracepoint functions to grub
around in the internals of these structures.
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Due to evidence of contention both the buf_hash_table and the
dbuf_hash_table sizes have been increased from 256 to 8192.
This increase in hash table size adds approximating 0.5M to
our fixed memory footprint. This relatively small increase
is not expected to cause problems even on low memory machines.
This footprint will also become dynamic when the persistent
L2ARC support is finalized. In the meanwhile, this small
change significantly reduces contention for certain workloads.
Signed-off-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#1291
These symbols are needed by consumers (i.e. Lustre) who wish to
integrate with the ZIL. In addition the zil_rollback_destroy()
prototype was removed because the implementation of this function
was removed long ago.
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2892
When building zfs modules with kernel, compiled from deb.src, the
packaging process ends up installing the modules in the wrong place.
Signed-off-by: Alexander Pyhalov <apyhalov@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2822
The new shrinker API as of Linux 3.12 modifies "struct shrinker" by
replacing the @shrink callback with the pair of @count_objects and
@scan_objects. It also requires the return value of @count_objects to
return the number of objects actually freed whereas the previous @shrink
callback returned the number of remaining freeable objects.
This patch adds support for the new @scan_objects return value semantics.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#2837
5164 space_map_max_blksz causes panic, does not work
5165 zdb fails assertion when run on pool with recently-enabled
space map_histogram feature
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5164https://www.illumos.org/issues/5165https://github.com/illumos/illumos-gate/commit/b1be289
Porting Notes:
The metaslab_fragmentation() hunk was dropped from this patch
because it was already resolved by commit 8b0a084.
The comment modified in metaslab.c was updated to use the correct
variable name, space_map_blksz. The upstream commit incorrectly
used space_map_blksize.
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2697
4958 zdb trips assert on pools with ashift >= 0xe
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/4958https://github.com/illumos/illumos-gate/commit/2a104a5
Porting notes:
Keep the ZIO_FLAG_FASTWRITE define. This is for a feature present
in Linux but not yet in *BSD.
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2697
The general strategy used by ZFS to verify that blocks are valid is
to checksum everything. This has the advantage of being extremely
robust and generically applicable regardless of the contents of
the block. If a blocks checksum is valid then its contents are
trusted by the higher layers.
This system works exceptionally well as long as bad data is never
written with a valid checksum. If this does somehow occur due to
a software bug or a memory bit-flip on a non-ECC system it may
result in kernel panic.
One such place where this could occur is if somehow the logical
size stored in a block pointer exceeds the maximum block size.
This will result in an attempt to allocate a buffer greater than
the maximum block size causing a system panic.
To prevent this from happening the arc_read() function has been
updated to detect this specific case. If a block pointer with an
invalid logical size is passed it will treat the block as if it
contained a checksum error.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2678
The Linux VFS handles mandatory locks generically so we shouldn't
need to check for conflicting locks in zfs_read(), zfs_write(), or
zfs_freesp(). Linux 3.18 removed the lock_may_read() and
lock_may_write() interfaces which we were relying on for this
purpose. Rather than emulating those interfaces we remove the
redundant checks.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2804
5162 zfs recv should use loaned arc buffer to avoid copy
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Bayard Bell <Bayard.Bell@nexenta.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/5162https://github.com/illumos/illumos-gate/commit/8a90470
Porting notes:
Fix spelling error 's/arena/area/' in dmu.c.
In restore_write() declare bonus and abuf at the top of the function.
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2696
When a clone is created of a snapshot that has been marked for
deferred destroy (with "zfs destroy -d"), the clone "inherits" the
defer_destroy flag from the origin, and any snapshots of the clone
"inherit" the defer_destroy flag from the clone. This causes a strange
situation where the clone's snapshots are marked for defer_destroy but
they have no holds or clones. If the clone's snapshot gets a hold or
clone, which is then deleted, we will honor the incorrectly-set
defer_destroy flag and delete the snapshot!
Steps to reproduce:
* zpool create test c1t1d0
* zfs create test/fs
* zfs snapshot test/fs@a
* zfs clone test/fs@a test/clone
* zfs destroy -d test/fs@a
* zfs clone test/fs@a test/clone2
* zfs snapshot test/clone2@a
* zfs hold hld test/clone2@a
* zfs release hld test/clone2@a
* zfs list -r -t all test
<test/clone2@a has been destroyed>
We noticed that this causes dcenter to get very confused, because it
treats snapshots that are marked defer_destroy as not existing. So it
won't see any snapshots of the clone that's marked defer_destroy.
5150 - zfs clone of a defer_destroy snapshot causes strangeness
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/projects/illumos-gate//issues/5150https://github.com/illumos/illumos-gate/commit/42fcb65
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2690
Restore_object should not use two transactions to restore an object:
* one transaction is used for dmu_object_claim
* another transaction is used to set compression, checksum and most
importantly bonus data
* furthermore dmu_object_reclaim internally uses multiple transactions
* dmu_free_long_range frees chunks in separate transactions
* dnode_reallocate is executed in a distinct transaction
The fact the dnode_allocate/dnode_reallocate are executed in one
transaction and bonus (re-)population is executed in a different
transaction may lead to violation of ZFS consistency assertions if the
transactions are assigned to different transaction groups. Also, if
the first transaction group is successfully written to a permanent
storage, but the second transaction is lost, then an invalid dnode may
be created on the stable storage.
3693 restore_object uses at least two transactions to restore an object
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andriy Gapon <andriy.gapon@hybridcluster.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Original authors: Matthew Ahrens and Andriy Gapon
References:
https://www.illumos.org/issues/3693https://github.com/illumos/illumos-gate/commit/e77d42e
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2689
In zfs_acl_chown_setattr(), the zfs_mode_comput() function is used to
create a traditional mode value based on an ACL. If no ACL exists, this
processing shouldn't be done. Problems caused by this were most evident
on version 4 filesystems which not only don't have system attributes,
and also frequently have empty ACLs. On such filesystems, performing a
chown() operation could have the effect of dirtying the mode bits in
memory but not on the file system as follows:
# create a file with typical mode of 664
echo test > test
chown anyuser test
ls -l test
and the mode will show up as all zeroes. Unmounting/mounting and/or
exporting/importing the filesystem will reveal the proper mode again.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1264
Reviewed by Matthew Ahrens <mahrens@delphix.com>
Reviewed by Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://github.com/illumos/illumos-gate/commit/b8289d2https://www.illumos.org/issues/3756
Porting notes:
The static function zfs_prop_activate_feature() was removed because
this change removes the only caller. The function was not removed
from Illumos but instead left as dead code. However, to keep gcc
happy it was removed from Linux and may be easily restored if needed.
Ported by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1540
The new zpl_aio_write() and zpl_aio_read() functions use kmem_alloc()
to allocate enough memory to hold the vectorized IO. While this
allocation will be small it's been observed in practice to sometimes
slightly exceed the 8K warning threshold by a few kilobytes.
Therefore, the KM_NODEBUG flag has been added to suppress warning.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#2774
When selecting a mirror child it's possible that map allocated by
vdev_mirror_map_allc() contains a NULL for the child vdev. In
this case the child should be skipped and the read issues to
another member of the mirror.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#1744
Modify the code to use the utsname() kernel function rather than
a global variable. This results is cleaner more portable code
because utsname() is already provided by the kernel and can be
easily emulated in user space via uname(2). This means that it
will behave consistently in both contexts.
This is also has the benefit that it allows the removal of a few
_KERNEL pre-processor conditions. And it also is a pre-requisite
for a proper FUSE port because we need to provide a valid utsname.
Finally, it allows us to remove this functionality from the SPL
and all the related compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
This functionality is optional and until Linux 3.0, which
provided per-filesystem shinkers, they was never a reasonable
interface. Therefore, this functionality is being dropped
for earlier kernels.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
When ZPIOS was originally written it was designed to use the
device_create() and device_destroy() functions. Unfortunately,
these functions changed considerably over the years making them
difficult to rely on.
As it turns out a better choice would have been to use the
misc_register()/misc_deregister() functions. This interface
for registering character devices has remained stable, is simple,
and provides everything we need.
Therefore the code has been reworked to use this interface. The
higher level ZFS code has always depended on these same interfaces
so this is also as a step towards minimizing our kernel dependencies.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
This is a debug patch designed to ensure an error code is logged
to the console when this VERIFY() is hit.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #1440
Commit e022864 introduced a regression for kernels which are built
with CONFIG_DEBUG_PREEMPT. The use of CPU_SEQID in a preemptible
context causes zio_nowait() to trigger the BUG. Since CPU_SEQID
is simply being used as a random index the usage here is safe. To
resolve the issue preempt is disable while calling CPU_SEQID.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#2769
5176 lock contention on godfather zio
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Bayard Bell <Bayard.Bell@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/5176https://github.com/illumos/illumos-gate/commit/6f834bc
Porting notes:
Under Linux max_ncpus is defined as num_possible_cpus(). This is
largest number of cpu ids which might be available during the life
time of the system boot. This value can be larger than the number
of present cpus if CONFIG_HOTPLUG_CPU is defined.
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2711
Creating virtual machines that have their rootfs on ZFS on hosts that
have their rootfs on ZFS causes SPA namespace collisions when the
standard name rpool is used. The solution is either to give each guest
pool a name unique to the host, which is not always desireable, or boot
a VM environment containing an ISO image to install it, which is
cumbersome.
26b42f3f9d introduced `zpool import -t
...` to simplify situations where a host must access a guest's pool when
there is a SPA namespace conflict. We build upon that to introduce
`zpool import -t tname ...`. That allows us to create a pool whose
in-core name is tname, but whose on-disk name is the normal name
specified.
This simplifies the creation of machine images that use a rootfs on ZFS.
That benefits not only real world deployments, but also ZFSOnLinux
development by decreasing the time needed to perform rootfs on ZFS
experiments.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
As an attempt to perform the page truncation more optimally, the
hole-punching support added in 223df0161f
truncated performed the operation in two steps: first, sub-page "stubs"
were zeroed under the range lock in zfs_free_range() using the new
zfs_zero_partial_page() function and then the whole pages were truncated
within zfs_freesp(). This left a window of opportunity during which
the full pages could be touched.
This patch closes the window by moving the whole-page truncation into
zfs_free_range() under the range lock.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2733
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Mattew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5138https://github.com/illumos/illumos-gate/commit/af3465d
Porting notes:
Because support for exposing a uint64_t parameter wasn't added
until v3.17-rc1 the zfs_free_max_blocks variable has been declared
as a unsigned long. This is already far larger than required and
it allows us to avoid additional autoconf compatibility code.
The default value has been set to 100,000 on Linux instead of
ULONG_MAX which is used on Illumos. This was done to limit the
number of outstanding IOs in the system when snapshots are destroyed.
This helps ensure individual TXG sync times are kept reasonable and
memory isn't wasted managing a huge backlog of outstanding IOs.
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2675Closes#2581
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/4753https://github.com/illumos/illumos-gate/commit/73527f4
Comments by Matt Ahrens from the issue tracker:
When a sync task is waiting for a txg to complete, we should hurry
it along by increasing the number of outstanding async writes
(i.e. make vdev_queue_max_async_writes() return a larger number).
Initially we might just have a tunable for "minimum async writes
while a synctask is waiting" and set it to 3.
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2716
5139 SEEK_HOLE failed to report a hole at end of file
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Peng Dai <peng.dai@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5139https://github.com/illumos/illumos-gate/commit/0fbc0cd
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2714
LLVM's static analyzer reported that we could pass an uninitialized
pool_guid to spa_by_guid() in vdev_inuse(). Upon review, it is correct.
An attempt to repurpose a spare or L2ARC drive from an exported pool
will cause the pool_guid passed to spa_by_guid() to be unintialized
information from the stack. This will cause non-deterministic behavior.
Since there is no reason why we cannot repurpose such disks, we modify
vdev_inuse() to avoid calling spa_by_guid() when they are detected.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2330
5161 add tunable for number of metaslabs per vdev
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/5161https://github.com/illumos/illumos-gate/commit/bf3e216
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2698
5177 remove dead code from dsl_scan.c
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5177https://github.com/illumos/illumos-gate/commit/5f37736
Porting notes:
The local variable 'buf' was removed from dsl_scan_visitbp().
This wasn't part of the original patch but it should have been.
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2712
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/projects/illumos-gate//issues/5140https://github.com/illumos/illumos-gate/commit/2243853
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2676
When rolling back a mounted filesystem zfs_suspend() is called
which acquires the z_teardown_inactive_lock. This lock can not
be dropped until the filesystem has been rolled back and resumed
in zfs_resume_fs().
Therefore, we must not call iput() under this lock because it
may result in the inode->evict() handler being called which also
takes this lock. Instead use zfs_iput_async() to ensure dropping
the last reference is deferred and runs in a safe context.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2670
Add support for the FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE mode of
fallocate(2). Mimic the behavior of other native file systems such as
ext4 in cases where the file might be extended. If the offset is beyond
the end of the file, return success without changing the file. If the
extent of the punched hole would extend the file, only the existing tail
of the file is punched.
Add the zfs_zero_partial_page() function, modeled after update_page(),
to handle zeroing partial pages in a hole-punching operation. It must
be used under a range lock for the requested region in order that the
ARC and page cache stay in sync.
Move the existing page cache truncation via truncate_setsize() into
zfs_freesp() for better source structure compatibility with upstream code.
Add page cache truncation to zfs_freesp() and zfs_free_range() to handle
hole punching.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#2619
5117 space map reallocation can cause corruption
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/projects/illumos-gate/issues/5117https://github.com/illumos/illumos-gate/commit/e503a68
Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2662
smh
Nav Ravindranath
Paul Dagnelie
Chunwei Chen
Gvozden Neskovic
Tim Chase
Brian Behlendorf
Jinshan Xiong
GeLiXin
Tony Hutter
Nikolay Borisov
Marcel Huber
Dan McDonald
Chunwei Chen
David Quigley
Joe Stein
Vitaut Bajaryn
Alex Reece
Josef 'Jeff' Sipek
Ned Bass
Colin Ian King
DHE
Alex Wilson
Boris Protopopov
ab-oe
Richard Yao
Gary Mills
Matthew Ahrens
Richard Sharpe
Jorgen Lundman
Simon Klinkert
kernelOfTruth
Dan McDonald
George Wilson
Josef 'Jeff' Sipek
Marcel Telka
Richard Yao
Will Andrews
Justin Gibbs
Saso Kiselkov
Jeremy Jones
Olaf Faaland
AndCycle
Justin T. Gibbs
Lukas Wunner
Don Brady
Arne Jansen
Andrey Vesnovaty
loli10K
Prakash Surya
Turbo Fredriksson
Alexander Eremin
Justin T. Gibbs
Alexander Motin
Arne Jansen
Andriy Gapon
Alek Pinchuk
Etienne Dechamps
Matus Kral
Chris Williamson
Jan Sanislo
Antonio Russo
Max Grossman
David Lamparter
Chris Dunlop
Will Andrews
Christopher Siden
Jerry Jelinek
Jason Zaman
Alex Reece
Isaac Huang
Dan Swartzendruber
Jörg Thalheim
Prakash Surya
Chris Wedgwood
Alex Zhuravlev
Alexander Pyhalov
Daniil Lunev
Adam Leventhal