zfs-load-key.sh is called by the dracut-pre-mount.service unit which has
no explicit 'After' dependency on zfs-import.target. That way it can be
that the pool has not yet been imported and the zfs-load-key.sh finishes
without ever seeing the relevant pool.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Lorenz Hüdepohl <dev@stellardeath.org>
Closes#11500
On openSUSE the initrd has systemctl in /usr/bin, check this path as
well.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Lorenz Hüdepohl <dev@stellardeath.org>
Closes#11487
zgenhostid(8) is used to modify or create /etc/hostid. This
administrative tool is currently installed to bindir. System utilities
are typically placed in sbin.
Modify the installation directory for zgenhostid. Additionally, track
this change in its use in dracut and the rpm installation.
Authored-by: наб <nabijaczleweli@nabijaczleweli.xyz>
Authored-by: Antonio Russo <aerusso@aerusso.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes#11485
Despite that dracut has a hard dependency on bash,
its modules doesn't, dracut only has a hard dependency on bash for
module-setup (on a fully usable machine). Inside initramfs, dracut
allows users choose from a list of handful other shells, e.g. bash,
busybox, dash, mkfsh.
In fact, my local machine's initramfs is being built with dash,
and it's functional for a very long time.
Before 64025fa3a (Silence 'make checkbashisms', 2020-08-20), we also
allows our users to have that right, too.
Let's fix the problem 'make checkbashisms' reported and allows our users
to have that right, again.
For 'plymouth' case, let's simply run the command inside the if instead
of checking for the existence of command before running it, because the
status is also failture if plymouth is unavailable.
While we're at it, let's remove an unnecessary fork for grep in
zfs-generator.sh.in and its following complicated 'if elif fi' with
a simple 'case ... esac'.
To support this change, also exclude 90zfs from "make checkbashisms"
because the current CI infrastructure ships an old version of
"checkbashisms", which complains about "command -v", while the current
latest "checkbashisms" thinks it's fine. In the near future, we can
revert that change to "Makefile.am" when CI infrastructure is updated.
Reviewed-by: Gabriel A. Devenyi <gdevenyi@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Closes#11244
Bring over some of the improvements from dracut/zfs-load-key.sh,
shellcheck is slightly quieter as well
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11198
The loop now has a less confusing condition and properly uses
systemctl(1) is-failed's return code instead of that entire mess
The assignments could turn into "var=val program" if encryptionroot
or keylocation had whitespace in them
As a bonus, this (mostly) silences shellcheck
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11198
On systems with musl libc, hostid(1) always prints "00000000", which
will cause improper behavior when the 90zfs module is configured in a
dracut initramfs. Work around this by copying the host /etc/hostid if
the file exists, and otherwise only write /etc/hostid if hostid(1)
returns something meaningful. This avoids zgenhostid creating a random
/etc/hostid for the initramfs, which could lead to errors when trying to
import the pool if spl_hostid isn't defined in the kernel command line.
Furthermore, tag the /etc/hostid file as hostonly, since it is system
specific and shouldn't be taken into account when trying to use an
initramfs generated in one system to boot into a different system.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Georgy Yakovlev <gyakovlev@gentoo.org>
Co-authored-by: Andrew J. Hesford <ajh@sideband.org>
Signed-off-by: Érico Rolim <erico.erc@gmail.com>
Closes#11174Closes#11189
This change updates the documentation to refer to the project
as OpenZFS instead ZFS on Linux. Web links have been updated
to refer to https://github.com/openzfs/zfs. The extraneous
zfsonlinux.org web links in the ZED and SPL sources have been
dropped.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11007
It was discovered that dracut scripts and zgenhostid
always generate little-endian /etc/hostid.
This commit provides simple endianess-aware binary
and updates the scripts to use it.
New features include:
-f flag to force overwrite.
-o flag to write to different file (for dracut)
accepting both 0x01234567 and 01234567 values as input
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Georgy Yakovlev <gyakovlev@gentoo.org>
Closes#10887Closes#10925
Commit d2bce6d03 added the 'make checkbashisms' target but did not
resolve all of the bashisms in the scripts. This commit doesn't
resolve them all either but it does fix up a few, and it excludes
the others so 'make checkstyle' no longer prints warnings. It's
a small step in the right direction.
* Dracut is Linux specific and itself depends on bash. Therefore
all dracut support scripts can be bash specific, update their
shebang accordingly.
* zed-functions.sh, zfs-import, zfs-mount, zfs-zed, smart
paxcheck.sh, make_gitrev.sh - these scripts were excuded from
the check until they can be updated and properly tested.
* zfsunlock - only whole values for sleep are allowed.
* vdev_id - removed unneeded locals; use && instead of -a.
* dkms.mkconf, dkms.postbuil - use || instead of -o.
Reviewed-by: InsanePrawn <insane.prawny@gmail.com>
Reviewed-by: Gabriel A. Devenyi <gdevenyi@gmail.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10755
A bunch of places need to edit files to incorporate the configured paths
i.e. bindir, sbindir etc. Move this logic into a common file.
Create arc_summary by copying arc_summary[23] as appropriate at build
time instead of install time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10559
Reduce the usage of EXTRA_DIST. If files are conditionally included in
_SOURCES, _HEADERS etc, automake is smart enough to dist all files that
could possibly be included, but this does not apply to EXTRA_DIST,
resulting in make dist depending on the configuration.
Add some files that were missing altogether in various Makefile's.
The changes to disted files in this commit (excluding deleted files):
+./cmd/zed/agents/README.md
+./etc/init.d/README.md
+./lib/libspl/os/freebsd/getexecname.c
+./lib/libspl/os/freebsd/gethostid.c
+./lib/libspl/os/freebsd/getmntany.c
+./lib/libspl/os/freebsd/mnttab.c
-./lib/libzfs/libzfs_core.pc
-./lib/libzfs/libzfs.pc
+./lib/libzfs/os/freebsd/libzfs_compat.c
+./lib/libzfs/os/freebsd/libzfs_fsshare.c
+./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c
+./lib/libzfs/os/freebsd/libzfs_zmount.c
+./lib/libzutil/os/freebsd/zutil_compat.c
+./lib/libzutil/os/freebsd/zutil_device_path_os.c
+./lib/libzutil/os/freebsd/zutil_import_os.c
+./module/lua/README.zfs
+./module/os/linux/spl/README.md
+./tests/README.md
+./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh
+./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh
+./tests/zfs-tests/tests/functional/inheritance/README.config
+./tests/zfs-tests/tests/functional/inheritance/README.state
+./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh
+./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10501
There's no need to specify the srcdir explicitly in _HEADERS and
EXTRA_DIST.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10493
The horrible effects of human slavery continue to impact society. The
casual use of the term "slave" in computer software is an unnecessary
reference to a painful human experience.
This commit removes all possible references to the term "slave".
Implementation notes:
The zpool.d/slaves script is renamed to dm-deps, which uses the same
terminology as `dmsetup deps`.
References to the `/sys/class/block/$dev/slaves` directory remain. This
directory name is determined by the Linux kernel. Although
`dmsetup deps` provides the same information, it unfortunately requires
elevated privileges, whereas the `/sys/...` directory is world-readable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10435
Unlike other filesystems, snapshots and rollbacks of bootfs need to be
done from a rescue environment. This patch makes it possible to snap-
shot or rollback the bootfs simply by specifying bootfs.snapshot or
bootfs.rollback on the kernel command line. The operation will be
performed by dracut just before bootfs is mounted.
Reviewed-by: Antonio Russo <antonio.e.russo@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Closes#10198
Not all systems / distros have a `/bin/bash`, and these scripts are
more difficult to run at development time.
For example, my system is NixOS which doesn't have a /bin/bash. This
is not a problem for NixOS building ZFS as a package: the build
environment automatically replaces these shebangs with corrected
paths.
The problem is much more annoying at development time: either the
scripts don't run, or I correct them for my local machine and deal with
a perpetually dirty work tree.
Before committing this patch I confirmed there are existing scripts
which use `/usr/bin/env` to locate bash, so I am thinking this is a
safe transformation.
There are a handful of other shebangs in this repository which don't
work on my system. This patch is useful on its own specifically for
`commitcheck.sh`, otherwise I can't validate my commits before
submission.
Here are the remaining shebangs which NixOS systems won't have:
1274 #!/bin/ksh -p
91 #!/bin/ksh
89 #! /bin/ksh -p
2 #!/bin/sed -f
1 #!/usr/bin/perl -w
1 #!/usr/bin/ksh
1 #!/bin/nawk -f
plus this which will create an invalid shebang in
`tests/zfs-tests/tests/functional/mv_files/mv_files_common.kshlib`:
echo "#!/bin/ksh" > $TEST_BASE_DIR/exitsZero.ksh
I chose to leave those alone for now, and gauge the interest in this
much smaller patch first.
The fixes for these are easy enough by simply using `/usr/bin/env ksh`:
91 #!/bin/ksh
1 #!/usr/bin/ksh
The fix for the other set is much trickier. Quoting the GNU coreutils
manual:
Most operating systems (e.g. GNU/Linux, BSDs) treat all text after
the first space as a single argument. When using env in a script it
is thus not possible to specify multiple arguments.
and not all `env`'s support arguments.
Mine (GNU Coreutils 8.31) does, though this feature is new since
April 2018, GNU Coreutils 8.30:
https://git.savannah.gnu.org/cgit/coreutils.git/commit/?id=668306ed86c8c79b0af0db8b9c882654ebb66db2
and worse, requires the -S argument:
-S, --split-string=S process and split S into separate arguments;
used to pass multiple arguments on shebang
lines
Example:
$ seq 1 2 | $(nix-build '<nixpkgs>' -A coreutils)/bin/env "sort -nr"
/nix/[...]-coreutils-8.31/bin/env: ‘sort -nr’: No such file or directory
/nix/[...]-coreutils-8.31/bin/env: use -[v]S to pass options in shebang lines
$ seq 1 2 | $(nix-build '<nixpkgs>' -A coreutils)/bin/env "-S sort -nr"
2
1
GNU Coreutils says FreeBSD's `env` does, though I wonder if FreeBSD's
would be unhappy with the `-S`:
https://www.gnu.org/software/coreutils/manual/html_node/env-invocation.html#env-invocation
BusyBox v1.30.1 does not, and does not have a `-S`-like option:
$ seq 1 2 | $(nix-build '<nixpkgs>' -A busybox)/bin/env "sort -nr"
env: can't execute 'sort -nr': No such file or directory
Toybox 0.8.1 also does not, and also does not have a `-S` option:
$ seq 1 2 | $(nix-build '<nixpkgs>' -A toybox)/bin/env "sort -nr"
env: exec sort -nr: No such file or directory
---
At any rate, if this patch merges and the remaining ~1,500 are updated,
the much larger patch should probably include a checkstyle-like test
asserting all new shebangs use `/usr/bin/env`. I also don't mind
dealing with NixOS weirdness if the project would prefer that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Graham Christensen <graham@grahamc.com>
Closes#9893
A change[1] was merged yesterday that should refer
to the zfs binary in the initramfs, but is actually
an unset shell variable.
This commit changes this line to call `zfs` directly
like the surrounding code.
[1]: cb5b875b27
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Ben Cordero <bencord0@condi.me>
Closes#9780
If the encryption key is stored in a file, the initramfs should not
prompt for the password. For example, this could be the case if the boot
partition is stored on removable media that is only present at boot time
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Closes#9764
Don't ask for the password / try to load the key if the key for the
encryptionroot is already loaded. The user might have loaded the key
manually or by other means before the scripts get called.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Witaut Bajaryn <vitaut.bayaryn@gmail.com>
Closes#9495Closes#9529
Removes the 'ZFS=' prefix from $BOOTFS instead of $root. This makes sure
that the 'zfs:' prefix remains stripped so that users with
'root=zfs:dataset' cmdline can have key loaded on boot again.
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Dacian Reece-Stremtan <dacianstremtan@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hiếu Lê <leorize+oss@disroot.org>
Closes#9520
Line 31 and 32 overwrote the ${root} variable which broke mount-zfs.sh
We have create a new variable for the dataset instead of overwriting the
${root} variable in zfs-load-key.sh${root} variable in zfs-load-key.sh
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dacian Reece-Stremtan <dacianstremtan@gmail.com>
Closes#8913Closes#9379
The double-colon looked like a typo, but it's actually an obscure
feature. Rules with :: may appear multiple times and are run
independently of one another in the order they appear. The use of ::
for distclean-local was conventional, not accidental.
Add comments to indicate the intentional use of double-colon rules.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#9210
The whereis command should not be used since it may not exist
in the initramfs. The dracut plymouth module also uses the type
command instead of whereis.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Signed-off-by: Dacian Reece-Stremtan <dacianstremtan@gmail.com>
Closes#8920Closes#8938
Dracut depends on the environment variable BOOTFS to be set after pool
import. This dracut specific systemd ExecStartPost command should not be
called for any non-dracut systems, so let's move it to a static systemd
unit that.
Reviewed-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com>
Reviewed-by: Matthew Thode <prometheanfire@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#8510
The dracut howto proposed to boot from the root dataset of a pool.
Apart from this giving problems when booting (as the code seems to
expect a child dataset and creates an illegal dataset name when using
the root dataset) the technical limitations of the root dataset
(among others the inability to rename or destroy through the `zfs`
command) resulted in the general consensus to only use it as a
container for the datasets in the pool - not as a filesystem itself.
Removed the idea to boot from the root dataset.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: Gregor Kopka <gregor@kopka.net>
Closes#8247
Since the `cut -b` command is used by `parse-zfs.sh`,
ensure that it is copied to the initramfs.
Fix spl_hostid when set by cmdline. This follows a
similar logic from the `zgenhostid` script, using `echo`
instead of `printf`.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ben Cordero <bencord0@condi.me>
Closes#8197
PR #8114 quoted the ${ENCRYPTIONROOT} parameter to ensure we don't
lose spaces when unlocking root filesystem in the off chance that
it has a space in its name.
Unfortunately, dracut and initramfs-tools do not actually get the
quotes from the cmdline. If we use root=ZFS="root pool/filesystem
name" the script still only sees root=ZFS=root and no quotation
marks.
Because + is a reserved character in ZFS, it's used as a
placeholder for spaces in the kernel cmdline. In this way,
root=ZFS=root+pool/filesystem+name will properly expand by
replacing the character with sed (POSIX compliant method).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: Kash Pande <kash@tripleback.net>
Issue #8114Closes#8117
Add quotations for ${ENCRYPTIONROOT} to avoid breaking systems
with a space in the name.
Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kash Pande <kash@tripleback.net>
Related-to: #8093Closes#8114
The new zfs-import.target should be used in place of the
zfs-import-*.service units.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#6964
Systemd binaries necessary for mounting an encrypted root dataset
weren't copied to initramfs generated by dracut. This patch fixes
this and copies these binaries unconditionally, that is
regardless of whether native ZFS encryption is used for the
root dataset.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Diamantopoulos <georgediam@gmail.com>
Closes#7607Closes#7719
vdev_id requires the program `basename` when handling short aliases
defined in `vdev_id.conf` (those defined without a leading path), but
`basename` is not always available in the dracut environment. This
causes the pool device names to change when using `by-vdev/` devices
or (in extreme cases) can make the pool import fail in dracut.
This commit fixes the problem by explicitly installing `basename`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Steffen Müthing <steffen.muething@iwr.uni-heidelberg.de>
Closes#7562
Resolves importing root pool during boot in dracut. This case was
inadvertently broken with the module autoloading change in #7287.
Reviewed-by: Matthew Thode <prometheanfire@gentoo.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Kash Pande <kash@tripleback.net>
Closes#7322
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533
Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
The generated zfs-load-key.sh file should have been added to
the .gitignore file as part of commit 7da8f8d8. And the
generated file should not be included in the repo.
Reviewed-by: Matthew Thode <prometheanfire@gentoo.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7134
The on-disk format for encrypted datasets protects not only
the encrypted and authenticated blocks themselves, but also
the order and interpretation of these blocks. In order to
make this work while maintaining the ability to do raw
sends, the indirect bps maintain a secure checksum of all
the MACs in the block below it along with a few other
fields that determine how the data is interpreted.
Unfortunately, the current on-disk format erroneously
includes some fields which are not portable and thus cannot
support raw sends. It is not possible to easily work around
this issue due to a separate and much smaller bug which
causes indirect blocks for encrypted dnodes to not be
compressed, which conflicts with the previous bug. In
addition, the current code generates incompatible on-disk
formats on big endian and little endian systems due to an
issue with how block pointers are authenticated. Finally,
raw send streams do not currently include dn_maxblkid when
sending both the metadnode and normal dnodes which are
needed in order to ensure that we are correctly maintaining
the portable objset MAC.
This patch zero's out the offending fields when computing
the bp MAC and ensures that these MACs are always
calculated in little endian order (regardless of the host
system's byte order). This patch also registers an errata
for the old on-disk format, which we detect by adding a
"version" field to newly created DSL Crypto Keys. We allow
datasets without a version (version 0) to only be mounted
for read so that they can easily be migrated. We also now
include dn_maxblkid in raw send streams to ensure the MAC
can be maintained correctly.
This patch also contains minor bug fixes and cleanups.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6845Closes#6864Closes#7052
'zfs load-key -a' will only be called if needed. If a dataset not
needed for boot does not have its key loaded (home directories for
example) boot can still continue.
zfs:AUTO was not working via dracut, so we still need the generator
script to do its thing.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes#6982Closes#7004
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6962
* PBKDF2 implementation changed to OpenSSL implementation.
* HKDF implementation moved to its own file and tests
added to ensure correctness.
* Removed libzfs's now unnecessary dependency on libzpool
and libicp.
* Ztest can now create and test encrypted datasets. This is
currently disabled until issue #6526 is resolved, but
otherwise functions as advertised.
* Several small bug fixes discovered after enabling ztest
to run on encrypted datasets.
* Fixed coverity defects added by the encryption patch.
* Updated man pages for encrypted send / receive behavior.
* Fixed a bug where encrypted datasets could receive
DRR_WRITE_EMBEDDED records.
* Minor code cleanups / consolidation.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
On Void Linux (x86_64 musl) libgcc_s.so is located in "/usr/lib"
so it is not found by dracut and it produces an error.
Add a simple additional path check for "/usr/lib/libgcc_s.so*"
and install it in the initramfs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: privb0x23 <privb0x23@users.noreply.github.com>
Closes#6715
while these are source by dracut (which is a bash script)
the practical difference is small, but it is more correct:
/bin/sh is not bash on all systems (e.g. Debian and its
derivatives use /bin/dash as /bin/sh by default).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#6491
The vdev_id script requires awk, grep, and head. Use dracut_install to
ensure that these commands are available in the initrd environment.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Karsten Kretschmer <kkretschmer@gmail.com>
Closes#6443Closes#6452
The dracut/02zfsexpandknowledge/module-setup.sh.in has a syntax error
which makes the script unusable by a POSIX compliant shell like Dash
on Debian based systems.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Aron Xu <happyaron.xu@gmail.com>
Closes#5712
When Dracut starts up, it needs to determine whether a pool will remain
"hanging open" before the system shuts off. In such a case, then the
code to clean up the pool (using the previous export -F work) must
be invoked. Since Dracut has had a recent change that makes
mount-zfs.sh simply not run when the root dataset is already mounted,
we must use the cleanup hook to order Dracut to do shutdown cleanup.
Important note: this code will not accomplish its stated goal until this
bug is fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1385432
That bug impacts more than just ZFS. It impacts LUKS, dmraid, and
unmount during poweroff. It is a Fedora-wide bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com>
Closes#5287
The behavior of the Dracut module was very wrong before.
The correct behavior: initramfs should not run `zfs-mount` to completion
if the two generator files exist. If, however, one of them is missing,
it indicates one of three cases:
* The kernel command line did not specify a root ZFS file system, and
another Dracut module is already handling root mount (via systemd).
`mount-zfs` can run, but it will do nothing.
* There is no systemd to run `sysroot.mount` to begin with.
`mount-zfs` must run.
* The root parameter is zfs:AUTO, which cannot be run in sysroot.mount.
`mount-zfs` must run.
In any of these three cases, it is safe to run `zfs-mount` to completion.
`zfs-mount` must also delete itself if it determines it should not run,
or else Dracut will do the insane thing of running it over and over again.
Literally, the definition of insanity, doing the same thing that did not
work before, expecting different results. Doing that may have had a great
result before, when we had a race between devices appearing and pools
being mounted, and `mount-zfs` was tasked with the full responsibility
of importing the needed pool, but nowadays it is wrong behavior and
should be suppressed.
I deduced that self-deletion was the correct thing to do by looking at
other Dracut code, because (as we all are very fully aware of) Dracut
is entirely, ahem, "implementation-defined".
Tested-by: @wphilips
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com>
Closes#5157Closes#5204
Based upon @ryao's initial fix for 1c73494394fc9de9283b3fd4f00bcdf4bd300a7
( 5e9843405f63fdabe76e87b92b81a127d488abc7 ) this one also uses
`command -v` instead of `type`, but additionally only applies the
fix to close zfsonlinux/zfs#4749 when `libgcc_s.so.1` has not been included
by dracut automatically (verified by whether `zpool` links directly to
`libgcc_s.so`), as well as change the fallback option to match `libgcc_s.so*`.
Tested-by: Ben Jencks <ben@bjencks.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Moritz Maxeiner <moritz@ucworks.org>
Closes#5089Closed#5138
Lorenz Hüdepohl
Antonio Russo
Đoàn Trần Công Danh
наб
Érico Rolim
Brian Behlendorf
Georgy Yakovlev
Arvind Sankar
Matthew Ahrens
gregory-lee-bartholomew
Graham Christensen
Ben Cordero
sam-lunt
Witaut Bajaryn
alaviss
dacianstremtan
Ryan Moeller
Michael Niewöhner
Gregor Kopka
kpande
Antonio Russo
George Diamantopoulos
Steffen Müthing
Kash Pande
Chris Williamson
Matthew Thode
Tom Caputi
LOLi
privb0x23
Fabian-Gruenbichler
Karsten Kretschmer
Aron Xu
Rudd-O
Moritz Maxeiner