Commit Graph

8653 Commits

Author SHA1 Message Date
David Hedberg 37a27b4306
Wait for txg sync if the last DRR_FREEOBJECTS might result in a hole
If we receive a DRR_FREEOBJECTS as the first entry in an object range,
this might end up producing a hole if the freed objects were the
only existing objects in the block.

If the txg starts syncing before we've processed any following
DRR_OBJECT records, this leads to a possible race where the backing
arc_buf_t gets its psize set to 0 in the arc_write_ready() callback
while still being referenced from a dirty record in the open txg.

To prevent this, we insert a txg_wait_synced call if the first
record in the range was a DRR_FREEOBJECTS that actually
resulted in one or more freed objects.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Hedberg <david.hedberg@findity.com>
Sponsored by: Findity AB
Closes #11893
Closes #14358
2023-01-23 13:19:43 -08:00
Richard Yao 73968defdd
Reject streams that set ->drr_payloadlen to unreasonably large values
In the zstream code, Coverity reported:

"The argument could be controlled by an attacker, who could invoke the
function with arbitrary values (for example, a very high or negative
buffer size)."

It did not report this in the kernel. This is likely because the
userspace code stored this in an int before passing it into the
allocator, while the kernel code stored it in a uint32_t.

However, this did reveal a potentially real problem. On 32-bit systems
and systems with only 4GB of physical memory or less in general, it is
possible to pass a large enough value that the system will hang. Even
worse, on Linux systems, the kernel memory allocator is not able to
support allocations up to the maximum 4GB allocation size that this
allows.

This had already been limited in userspace to 64MB by
`ZFS_SENDRECV_MAX_NVLIST`, but we need a hard limit in the kernel to
protect systems. After some discussion, we settle on 256MB as a hard
upper limit. Attempting to receive a stream that requires more memory
than that will result in E2BIG being returned to user space.

Reported-by: Coverity (CID-1529836)
Reported-by: Coverity (CID-1529837)
Reported-by: Coverity (CID-1529838)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14285
2023-01-23 13:16:22 -08:00
rob-wing 69f024a56e
Configure zed's diagnosis engine with vdev properties
Introduce four new vdev properties:
    checksum_n
    checksum_t
    io_n
    io_t

These properties can be used for configuring the thresholds of zed's
diagnosis engine and are interpeted as <N> events in T <seconds>.

When this property is set to a non-default value on a top-level vdev,
those thresholds will also apply to its leaf vdevs. This behavior can be
overridden by explicitly setting the property on the leaf vdev.

Note that, these properties do not persist across vdev replacement. For
this reason, it is advisable to set the property on the top-level vdev
instead of the leaf vdev.

The default values for zed's diagnosis engine (10 events, 600 seconds)
remains unchanged.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology LLC
Closes #13805
2023-01-23 13:14:25 -08:00
Richard Yao f091db9248
free_blocks(): Fix reports from 2016 PVS Studio FreeBSD report
In 2016, the authors of PVS Studio ran it on the FreeBSD kernel, which
identified a number of bugs / cleanup opportunities in the FreeBSD ZFS kernel
code. A few of them persist to the present day:

https://reviews.freebsd.org/D5245

Note that the scan was done against
freebsd/freebsd-src@46763fd4ca.

In particular, we have the following in free_blocks():

\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (174): error V547: Expression '__left >= __right' is always true. Unsigned type value is always >= 0.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (171): error V634: The priority of the '*' operation is higher than that of the '<<' operation. It's possible that parentheses should be used in the expression.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (175): error V547: Expression '__left >= __right' is always true. Unsigned type value is always >= 0.

A couple of assertions accidentally typecast the arguments they check to
unsigned in such a way that the result is always true. Also, parentheses
are missing around `1<<epbs` in `(db->db_blkid * 1<<epbs)`. This works
out to be okay due to multiplication not caring what order of operations
we use, but it is better to fix it to be `(db->db_blkid << epbs)`.

A few of the function local variables probably never should have been
32-bit in the first place, so we make them 64-bit. We also replace the
existing assertions with additional assertions to ensure that 64-bit
unsigned arithmetic is safe.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14407
2023-01-23 13:12:37 -08:00
Chunwei Chen 71974946be
Fix reading uninitialized variable in receive_read
When zfs_file_read returns error, resid may be uninitialized.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #14404
2023-01-20 11:49:56 -08:00
Allan Jude 63267f7f77
zfs_receive_one: Check for the more likely error first
If zfs_receive_one() gets back EINVAL, check for the more likely case,
embedded block pointers + encryption and return that error, before
falling back to the less likely case, a resumable stream when the
kernel has not been upgraded to support resume.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: rsync.net
Sponsored-by: Klara Inc.
Closes #14379
2023-01-20 11:11:54 -08:00
Richard Yao 856cefcd1c
Cleanup ->dd_space_towrite should be unsigned
This is only ever used with unsigned data, so the type itself should be
unsigned. Also, PVS Studio's 2016 FreeBSD kernel report correctly
identified the following assertion as always being true, so we can drop
it:

ASSERT3U(dd->dd_space_towrite[i & TXG_MASK], >=, 0);

The reason it was always true is because it would do casts to give us
unsigned comparisons. This could have been fixed by switching to
`ASSERT3S()`, but upon inspection, it turned out that this variable
never should have been allowed to be signed in the first place.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14408
2023-01-20 11:10:15 -08:00
Mark Johnston ebabb93e6c Micro-optimize dsl_prop_get_dd()
Use the saved property index instead of looking it up once per DSL
directory when traversing up towards the root.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: The FreeBSD Foundation
Closes #14397
2023-01-20 11:01:41 -08:00
Mark Johnston 7c30100c00 Avoid passing an uninitialized index to dsl_prop_known_index
Reported-by: KMSAN
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: The FreeBSD Foundation
Closes #14397
2023-01-20 11:00:38 -08:00
Chunwei Chen c6dab6dd39
Fix unprotected zfs_znode_dmu_fini
In original code, zfs_znode_dmu_fini is called in zfs_rmnode without
zfs_znode_hold_enter. It seems to assume it's ok to do so when the znode
is unlinked. However this assumption is not correct, as zfs_zget can be
called by NFS through zpl_fh_to_dentry as pointed out by Christian in
https://github.com/openzfs/zfs/pull/12767, which could result in a
use-after-free bug.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12767 
Closes #14364
2023-01-19 16:59:05 -08:00
George Melikov a379083d9f
Man: fix defaults for zfs_dirty_data_max_max
It was changed in e99932f7de,
but without docs update.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #14400
2023-01-17 13:12:29 -08:00
Jorgen Lundman 68c0771cc9
Unify Assembler files between Linux and Windows
Add new macro ASMABI used by Windows to change
calling API to "sysv_abi".

Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #14228
2023-01-17 11:09:19 -08:00
Ameer Hamza 19d3961589
Use setproctitle to report progress of zfs send
This allows parsing of zfs send progress by checking the process
title.
Doing so requires some changes to the send code in libzfs_sendrecv.c;
primarily these changes move some of the accounting around, to allow
for the code to be verbose as normal, or set the process title. Unlike
BSD, setproctitle() isn't standard in Linux; thus, borrowed it from
libbsd with slight modifications.

Authored-by: Sean Eric Fagan <sef@FreeBSD.org>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14376
2023-01-17 10:17:35 -08:00
Richard Yao 2e7f664f04
Cleanup of dead code suggested by Clang Static Analyzer (#14380)
I recently gained the ability to run Clang's static analyzer on the
linux kernel modules via a few hacks. This extended coverage to code
that was previously missed since Clang's static analyzer only looked at
code that we built in userspace. Running it against the Linux kernel
modules built from my local branch produced a total of 72 reports
against my local branch. Of those, 50 were reports of logic errors and
22 were reports of dead code. Since we already had cleaned up all of
the previous dead code reports, I felt it would be a good next step to
clean up these dead code reports. Clang did a further breakdown of the
dead code reports into:

Dead assignment	15

Dead increment	2

Dead nested assignment	5

The benefit of cleaning these up, especially in the case of dead nested
assignment, is that they can expose places where our error handling is
incorrect. A number of them were fairly straight forward. However
several were not:

In vdev_disk_physio_completion(), not only were we not using the return
value from the static function vdev_disk_dio_put(), but nothing used it,
so I changed it to return void and removed the existing (void) cast in
the other area where we call it in addition to no longer storing it to a
stack value.

In FSE_createDTable(), the function is dead code. Its helper function
FSE_freeDTable() is also dead code, as are the CPP definitions in
`module/zstd/include/zstd_compat_wrapper.h`. We just delete it all.

In zfs_zevent_wait(), we have an optimization opportunity. cv_wait_sig()
returns 0 if there are waiting signals and 1 if there are none. The
Linux SPL version literally returns `signal_pending(current) ? 0 : 1)`
and FreeBSD implements the same semantics, we can just do
`!cv_wait_sig()` in place of `signal_pending(current)` to avoid
unnecessarily calling it again.

zfs_setattr() on FreeBSD version did not have error handling issue
because the code was removed entirely from FreeBSD version. The error is
from updating the attribute directory's files. After some thought, I
decided to propapage errors on it to userspace.

In zfs_secpolicy_tmp_snapshot(), we ignore a lack of permission from the
first check in favor of checking three other permissions. I assume this
is intentional.

In zfs_create_fs(), the return value of zap_update() was not checked
despite setting an important version number. I see no backward
compatibility reason to permit failures, so we add an assertion to catch
failures. Interestingly, Linux is still using ASSERT(error == 0) from
OpenSolaris while FreeBSD has switched to the improved ASSERT0(error)
from illumos, although illumos has yet to adopt it here. ASSERT(error ==
0) was used on Linux while ASSERT0(error) was used on FreeBSD since the
entire file needs conversion and that should be the subject of
another patch.

dnode_move()'s issue was caused by us not having implemented
POINTER_IS_VALID() on Linux. We have a stub in
`include/os/linux/spl/sys/kmem_cache.h` for it, when it really should be
in `include/os/linux/spl/sys/kmem.h` to be consistent with
Illumos/OpenSolaris. FreeBSD put both `POINTER_IS_VALID()` and
`POINTER_INVALIDATE()` in `include/os/freebsd/spl/sys/kmem.h`, so we
copy what it did.

Whenever a report was in platform-specific code, I checked the FreeBSD
version to see if it also applied to FreeBSD, but it was only relevant a
few times.

Lastly, the patch that enabled Clang's static analyzer to be run on the
Linux kernel modules needs more work before it can be put into a PR. I
plan to do that in the future as part of the on-going static analysis
work that I am doing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14380
2023-01-17 09:57:12 -08:00
Brian Behlendorf 60f86a2bfa
ZTS: Annotate additonal flaky test cases
Update several flaky test cases in zts-report.py.in until they
can be made entirely reliable.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14392
2023-01-17 09:53:53 -08:00
Brian Behlendorf 07281f7d13
CI: Reclaim space after package operations
Rather than reclaiming space before updating the packages do
it afterwards.  This avoids issues with apt returning an
error due to missing files on the system.

This commit includes a revert for 6320b9e6.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14387
2023-01-17 09:52:27 -08:00
Rob Wing 7a85f58db6 zpool-set: print error message when pool or vdev is not valid
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes #14310
2023-01-17 09:47:24 -08:00
Rob Wing a0276f7048 zpool-set: update usage text
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes #14310
2023-01-17 09:46:05 -08:00
Richard Yao d27c7ba62f
Linux ppc64le ieee128 compat: Do not redefine __asm on external headers
There is an external assembly declaration extension in GNU C that glibc
uses when building with ieee128 floating point support on ppc64le.
Marking that as volatile makes no sense, so the build breaks.

It does not make sense to only mark this as volatile on Linux, since if
do not want the compiler reordering things on Linux, we do not want the
compiler reordering things on any other platform, so we stop treating
Linux specially and just manually inline the CPP macro so that we can
eliminate it. This should fix the build on ppc64le.

Tested-by: @gyakovlev 
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14308
Closes #14384
2023-01-13 10:58:58 -08:00
Richard Yao 4ef69de384 Cleanup: Use NULL when doing NULL pointer comparisons
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:

./scripts/coccinelle/null/badzero.cocci

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 16:00:37 -08:00
Richard Yao 64195fc89f Cleanup: Remove unneeded semicolons
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:

./scripts/coccinelle/misc/semicolon.cocci

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 16:00:30 -08:00
Richard Yao 3b2f9c1ec8 Cleanup: Use MIN() macro
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:

./scripts/coccinelle/misc/minmax.cocci

There was a third opportunity to use `MIN()`, but that was in
`FSE_minTableLog()` in `module/zstd/lib/compress/fse_compress.c`.
Upstream zstd has yet to make this change and I did not want to change
header includes just for MIN, or do a one off, so I left it alone.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 16:00:23 -08:00
Richard Yao e6328fda2e Cleanup: !A || A && B is equivalent to !A || B
In zfs_zaccess_dataset_check(), we have the following subexpression:

(!IS_DEVVP(ZTOV(zp)) ||
    (IS_DEVVP(ZTOV(zp)) && (v4_mode & WRITE_MASK_ATTRS)))

When !IS_DEVVP(ZTOV(zp)) is false, IS_DEVVP(ZTOV(zp)) is true under the
law of the excluded middle since we are not doing pseudoboolean alegbra.
Therefore doing:

(IS_DEVVP(ZTOV(zp)) && (v4_mode & WRITE_MASK_ATTRS))

Is unnecessary and we can just do:

(v4_mode & WRITE_MASK_ATTRS)

The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:

./scripts/coccinelle/misc/excluded_middle.cocci

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 16:00:15 -08:00
Richard Yao 9c8fabffa2 Cleanup: Replace oldstyle struct hack with C99 flexible array members
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:

./scripts/coccinelle/misc/flexible_array.cocci

However, unlike the cases where the GNU zero length array extension had
been used, coccicheck would not suggest patches for the older style
single member arrays. That was good because blindly changing them would
break size calculations in most cases.

Therefore, this required care to make sure that we did not break size
calculations. In the case of `indirect_split_t`, we use
`offsetof(indirect_split_t, is_child[is->is_children])` to calculate
size. This might be subtly wrong according to an old mailing list
thread:

https://inbox.sourceware.org/gcc-prs/20021226123454.27019.qmail@sources.redhat.com/T/

That is because the C99 specification should consider the flexible array
members to start at the end of a structure, but compilers prefer to put
padding at the end. A suggestion was made to allow compilers to allocate
padding after the VLA like compilers already did:

http://std.dkuug.dk/JTC1/SC22/WG14/www/docs/n983.htm

However, upon thinking about it, whether or not we allocate end of
structure padding does not matter, so using offsetof() to calculate the
size of the structure is fine, so long as we do not mix it with sizeof()
on structures with no array members.

In the case that we mix them and padding causes offsetof(struct_t,
vla_member[0]) to differ from sizeof(struct_t), we would be doing unsafe
operations if we underallocate via `offsetof()` and then overcopy via
sizeof().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 16:00:03 -08:00
Richard Yao d35ccc1f59 Cleanup: Fix indentation in zfs_dbgmsg_t
fdc2d30371 accidentally broke the
indentation.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 15:59:56 -08:00
Richard Yao 8e7ebf4e2d Cleanup: Use C99 flexible array members instead of zero length arrays
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:

./scripts/coccinelle/misc/flexible_array.cocci

The Linux kernel's documentation makes a good case for why we should not
use these:

https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 15:59:41 -08:00
Richard Yao c9c3ce7976 Cleanup: Use kmem_zalloc() instead of memset() to zero memory
The Linux 5.16.14 kernel's coccicheck caught this. The semantic patch
that caught it was:

./scripts/coccinelle/api/alloc/zalloc-simple.cocci

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 15:59:28 -08:00
Richard Yao 7384ec65cd Cleanup: Remove unnecessary explicit casts of pointers from allocators
The Linux 5.16.14 kernel's coccicheck caught these. The semantic patch
that caught them was:

./scripts/coccinelle/api/alloc/alloc_cast.cocci

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14372
2023-01-12 15:59:12 -08:00
Gian-Carlo DeFazio 80d64bb85f
change how d_alias is replaced by du.d_alias
d_alias may need to be converted to du.d_alias
depending on the kernel version.
d_alias is currently in only one place in the code which
changes
"hlist_for_each_entry(dentry, &inode->i_dentry, d_alias)"
to
"hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias)"
as neccesary.

This effectively results in a double macro expansion
for code that uses the zfs headers but already has its
own macro for just d_alias (lustre in this case).

Remove the conditional code for hlist_for_each_entry
and have a macro for "d_alias -> du.d_alias" instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gian-Carlo DeFazio <defazio1@llnl.gov>
Closes #14377
2023-01-12 10:14:04 -08:00
George Amanakis eee9362a72
Activate filesystem features only in syncing context
When activating filesystem features after receiving a snapshot, do 
so only in syncing context.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14304 
Closes #14252
2023-01-11 18:00:39 -08:00
Brian Behlendorf 6320b9e68e
CI: remove unused packages/snaps
Removing portions of packages/snaps directly with rm can result in
unexpected errors when running `apt update`.  Free up the additional
space by removing (some) packages with the proper tools.

This change frees up slightly less space than before, but it is
expected to still be sufficient.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14374
2023-01-11 15:18:51 -08:00
rob-wing 6f2ffd272c
zpool: do guid-based comparison in is_vdev_cb()
is_vdev_cb() uses string comparison to find a matching vdev and 
will fallback to comparing the guid via a string.  These changes 
drop the string comparison and compare the guids instead.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Co-authored-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes #14311
2023-01-11 15:14:35 -08:00
Mateusz Piotrowski 926715b9fc
Turn default_bs and default_ibs into ZFS_MODULE_PARAMs
The default_bs and default_ibs tunables control the default block size
and indirect block size.

So far, default_bs and default_ibs were tunable only on FreeBSD, e.g.,

    sysctl vfs.zfs.default_ibs

Remove the FreeBSD-specific sysctl code and expose default_bs and
default_ibs as tunables on both Linux and FreeBSD using
ZFS_MODULE_PARAM.

One of the use cases for changing the values of those tunables is to
lower the indirect block size, which may improve performance of large
directories (as discussed during the OpenZFS Leadership Meeting
on 2022-08-16).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Closes #14293
2023-01-11 09:38:20 -08:00
Tony Hutter 4ba3eff2a6
Update META to 6.1 kernel
ZFS successfully builds against the 6.1.4 kernel.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #14371
2023-01-10 15:53:33 -08:00
Mateusz Piotrowski a4b21eadec
Add tunable to allow changing micro ZAP's max size
This change turns `MZAP_MAX_BLKSZ` into a `ZFS_MODULE_PARAM()` called
`zap_micro_max_size`. As a result, we can experiment with different
micro ZAP sizes to improve directory size scaling.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Mateusz Piotrowski <mateuszpiotrowski@klarasystems.com>
Co-authored-by: Toomas Soome <toomas.soome@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateuszpiotrowski@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Closes #14292
2023-01-10 13:41:54 -08:00
Alyssa Ross 1f19826c9a
etc/systemd/zfs-mount-generator: avoid strndupa
The non-standard strndupa function is not implemented by musl libc,
and can be dangerous due to its potential to blow the stack.  (musl
_does_ implement strdupa, used elsewhere in this function.)

With a similar amount of code, we can use a heap allocation to
construct the pool name, which is musl-friendly and doesn't have
potential stack problems.

(Why care about musl when systemd only supports glibc?  Some distros
patch systemd with portability fixes, and it would be nice to be able
to use ZFS on those distros.)

 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alyssa Ross <alyssa.ross@unikie.com>
Closes #14327
2023-01-10 13:40:31 -08:00
Matthew Ahrens fc45975ec8
Batch enqueue/dequeue for bqueue
The Blocking Queue (bqueue) code is used by zfs send/receive to send
messages between the various threads.  It uses a shared linked list,
which is locked whenever we enqueue or dequeue.  For workloads which
process many blocks per second, the locking on the shared list can be
quite expensive.

This commit changes the bqueue logic to have 3 linked lists:
1. An enquing list, which is used only by the (single) enquing thread,
   and thus needs no locks.
2. A shared list, with an associated lock.
3. A dequing list, which is used only by the (single) dequing thread,
   and thus needs no locks.

The entire enquing list can be moved to the shared list in constant
time, and the entire shared list can be moved to the dequing list in
constant time.  These operations only happen when the `fill_fraction` is
reached, or on an explicit flush request.  Therefore, the lock only
needs to be acquired infrequently.

The API already allows for dequing to block until an explicit flush, so
callers don't need to be changed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #14121
2023-01-10 13:39:22 -08:00
Brian Behlendorf 0c8fbe5b6a ztest: update ztest_dmu_snapshot_create_destroy()
ECHRNG is returned when the channel program encounters a runtime
error.  For example, this can happen when a snapshot doesn't exist.
We handle this error the same way as the existing EEXIST and ENOENT
error checks.

Additionally, improve the internal debug message to include the
error describing why a pool couldn't be opened.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:27:48 -08:00
Brian Behlendorf 549aafb7c8 ztest: ztest_dsl_prop_set_uint64() ENOSPC consistency
It is possible for ztest_dsl_prop_set_uint64() to fail with ENOSPC
and this needs to be handled consistently.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:27:48 -08:00
Brian Behlendorf f7788883ab ztest: reduce `zpool split` frequency
There's no need to so aggressively test splitting a pool.  Reduce
the occurence of this test to once every 10 seconds.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:27:48 -08:00
Brian Behlendorf 4208a052c2 ztest: update expectation for sparing a special device
Commit c23738c70e modified the expected
behavior of attach to prevent hot spares from being used as special
vdev replacements.  We update ztest's expectations accordingly to
prevent it from failing when testing the updated behavior.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:26:44 -08:00
Matthew Ahrens 40d7e971ff
ztest fails assertion in zio_write_gang_member_ready()
Encrypted blocks can have up to 2 DVA's, as the third DVA is reserved
for the salt+IV.  However, dmu_write_policy() allows non-encrypted
blocks (e.g. DMU_OT_OBJSET) inside encrypted datasets to request and
allocate 3 DVA's, since they don't need a salt+IV (they are merely
authenicated).

However, if such a block becomes a gang block, the gang code incorrectly
limits the gang block header to 2 DVA's.  This leads to a "NDVAs
inversion", where a parent block (the gang block header) has less DVA's
than its children (the gang members), causing an assertion failure in
zio_write_gang_member_ready().

This commit addresses the problem by only restricting the gang block
header to 2 DVA's if the block is actually encrypted (and thus its gang
block members can have at most 2 DVA's).

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #14250
Closes #14356
2023-01-09 16:43:45 -08:00
Charles Suh 44a78c05b3
libzpool: fix ddi_strtoull to update nptr
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Charles Suh <charles.suh@gmail.com>
Closes #14360
2023-01-09 12:49:35 -08:00
Ameer Hamza 5091867ee6
zed: add hotplug support for spare vdevs
This commit supports for spare vdev hotplug. The
spare vdev associated with all the pools will be
marked as "Removed" when the drive is physically
detached and will become "Available" when the
drive is reattached. Currently, the spare vdev
status does not change on the drive removal and
the same is the case with reattachment.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14295
2023-01-09 12:43:03 -08:00
Alexander Motin 289f7e6adb
Remove some dead ARC code. (#14340)
Every ARC buffer holds a reference on the header. It means headers with
buffers are never evictable.  When we are evicting a header, there can
be no more buffers to free.  Just assert that.

b_evict_lock seems not protecting anything now.  Remove it.

Buffers checksum should also be freed with the last uncompressed buffer,
so it should not be there also when we are evicting the header.

Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
2023-01-09 10:45:17 -08:00
Coleman Kane a0105f6cd4 linux 6.2 compat: bio->bi_rw was renamed bio->bi_opf
The bi_rw member of struct bio was renamed to bi_opf in Linux 6.2.
As well, Linux's implementation of bio_set_op_attrs(...) has been
removed.

The HAVE_BIO_BI_OPF macro already appears to be defined, but the
removal of the bio_set_op_attrs(...) implementation makes the build
fall back on the locally-defined implementation, which isn't updated
for the bio->bi_opf change. This commit adds that update.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #14324
Closes #14331
2023-01-06 14:43:22 -08:00
Coleman Kane 884a69357f linux 6.2 compat: get_acl() got moved to get_inode_acl() in 6.2
Linux 6.2 renamed the get_acl() operation to get_inode_acl() in
the inode_operations struct. This should fix Issue #14323.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #14323
Closes #14331
2023-01-06 14:40:54 -08:00
Antonio Russo 556ed09537 Introduce ZFS_LINUX_REQUIRE_API autoconf macro
Currently, if API tests fail, we either ignore the failures, or
unconditionally halt the kernel build.  This leads to situations where
incompatibilities with existing APIs may develop, but not trip the
configure compatibility checks.

This introduces a new mechanism to require APIs for kernels above a
particular version.  While not perfect, this at least guarantees
mainline kernels do not break existing APIs without at least providing
some warning.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes #14343
2023-01-06 14:33:53 -08:00
Antonio Russo d27c81847b Linux 6.1 compat: open inside tmpfile()
Linux 863f144 modified the .tmpfile interface to pass a struct file,
rather than a struct dentry, and expect the tmpfile implementation to
open inside of tmpfile().

This patch implements a configuration test that checks for this new API
and appropriately sets a HAVE_TMPFILE_DENTRY flag that tracks this old
API.  Contingent on this flag, the appropriate API is implemented.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes #14301
Closes #14343
2023-01-06 14:33:00 -08:00
Antonio Russo a7304ab9c1
ZTS: close in mmapwrite.c
mmapwrite is used during the ZTS to identify issues with mmap-ed files.
This helper program exercises this pathway by continuously writing to a
file.  ee6bf97c7 modified the writing threads to terminate after a set
amount of total data is written.  This change allows standard program
execution to reach the end of a writer thread without closing the file
descriptor, introducing a resource "leak."

This patch appeases resource leak analyses by close()-ing the file at
the end of the thread.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes #14353
2023-01-06 10:52:08 -08:00