ztest is intended to subject the ZFS code in userland to stress that it
should be able to withstand. Any failures that occur when running it are
failures that likely would occur inside the kernel. However, being in
userland, it is much easier to debug them. In practice, this prevents
a large number of problems from reaching production code.
A design decision was made by the original authors of ztest to make a
distinction between userland locking primitives and kernel locking
primitives. The ztest code itself calls userland locking primitives
while the kernel code being run in userland will call emulated kernel
locking primitives that wrap the userland locking primitives.
When ztest was first ported to Linux, a decision was made to use the
emulated kernel interfaces everywhere. In effect, the userland
rw_rdlock()/rw_wrlock() became the kernel rw_enter() and and the userland
rw_unlock() became the kernel rw_exit(). This caused a regression
because of an assertion in rw_enter() to catch recursive locking. That
is permitted in userland, but not in the kernel. Consequently, the ztest
code itself does recursive read locking. The use of the emulated kernel
interfaces consequently caused the following failure:
ztest: ../../lib/libzpool/kernel.c:384: Assertion `rwlp->rw_owner !=
zk_thread_current() (0x1c87150 != 0x1c87150)' failed.
That occurs because ztest_dmu_objset_create_destroy() will take a read
lock and call ztest_dmu_object_alloc_free(). That will call ztest_io(),
which will take a readlock only when asked to do ZTEST_IO_REWRITE. This
triggered the assertion.
The pthreads rwlock interface was based on the LWP rwlock interface
implemented in Illumos libc. Luckily enough, the subset used by ztest is
almost identical, so we can solve this problem by switching to the LWP
thread rwlock interface in ztest. This eliminates a point of divergence
with Illumos and should make code sharing slightly easier.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1970
zfsonlinux/zfs@1db7b9be75 should have
fixed this, but this particular string was overlooked.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2288
When processing directory components starting from the root dir,
zed_file_create_dirs() contained a bug in checking the return value of
mkdir(). A typo was made, and the test for (mkdir_errno != EEXIST) was
erroneously written as (mkdir_errno == EEXIST). If some of the leading
directory components already existed, this bug would cause the routine
to exit before creating the remaining directory components.
Instead of fixing the above mkdir_errno test, this commit replaces
zed_file_create_dirs() with mkdirp(). This cleanup was already
planned, and zed_file_create_dirs() only existed because I didn't
realize mkdirp() was already in tree at the time.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2248
This is a continuation of fb5c53ea65b75c67c23f90ebbbb1134a5bb6c140:
When /etc/mtab is updated on Linux it's done atomically with
rename(2). A new mtab is written, the existing mtab is unlinked,
and the new mtab is renamed to /etc/mtab. This means that we
must close the old file and open the new file to get the updated
contents. Using rewind(3) will just move the file pointer back
to the start of the file, freopen(3) will close and open the file.
In this commit, a few more rewind(3) calls were replaced with freopen(3)
to allow updated mtab entries to be picked up immediately.
Signed-off-by: John M. Layman <jml@frijid.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2215
Issue #1611
zed supports a '-M' cmdline opt to lock all pages in memory via
mlockall(). The _POSIX_MEMLOCK define is checked to determine whether
this function is supported. The current test assumes mlockall()
is supported if _POSIX_MEMLOCK is non-zero. However, this test is
insufficient according to mlock(2) and sysconf(3). If _POSIX_MEMLOCK
is -1, mlockall() is not supported; but if _POSIX_MEMLOCK is 0,
availability must be checked at runtime.
This commit adds an autoconf check for mlockall() to user.m4. The zed
code block for mlockall() is now guarded with a test for HAVE_MLOCKALL.
If defined, mlockall() will be called and its runtime availability
checked via its return value.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
When a vdev starts getting I/O or checksum errors it is now
possible to automatically rebuild to a hot spare device.
To cleanly support this functionality in a shell script some
additional information was added to all zevent ereports which
include a vdev. This covers both io and checksum zevents but
may be used but other scripts.
In the Illumos FMA solution the same information is required
but it is retrieved through the libzfs library interface.
Specifically the following members were added:
vdev_spare_paths - List of vdev paths for all hot spares.
vdev_spare_guids - List of vdev guids for all hot spares.
vdev_read_errors - Read errors for the problematic vdev
vdev_write_errors - Write errors for the problematic vdev
vdev_cksum_errors - Checksum errors for the problematic vdev.
By default the required hot spare scripts are installed but this
functionality is disabled. To enable hot sparing uncomment the
ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the
/etc/zfs/zed.d/zed.rc configuration file.
These scripts do no add support for the autoexpand property. At
a minimum this requires adding a new udev rule to detect when
a new device is added to the system. It also requires that the
autoexpand policy be ported from Illumos, see:
https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c
Support for detecting the correct name of a vdev when it's not
a whole disk was added by Turbo Fredriksson.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #2
This functionality has always been missing. But until now there
were no zevents which included an array of strings so it wasn't
missed. However, that's now changed so to ensure this information
is output correctly by 'zpool events -v' the DATA_TYPE_STRING_ARRAY
has been implemented.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
Several of the zfs utilities allow you to pass a vdev's guid rather
than the device name. However, the utilities are not consistent in
how they parse that guid. For example, 'zinject' expects the guid
to be passed as a hex value while 'zpool replace' wants it as a
decimal. The user is forced to just know what format to use.
This patch improve things by making the parsing more tolerant.
When strtol(3) is called using 0 for the base, rather than say
10 or 16, it will then accept hex, decimal, or octal input based
on the prefix. From the man page.
If base is zero or 16, the string may then include a "0x"
prefix, and the number will be read in base 16; otherwise,
a zero base is taken as 10 (decimal) unless the next character
is '0', in which case it is taken as 8 (octal).
NOTE: There may be additional conversions not caught be this patch.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
zed monitors ZFS events. When a zevent is posted, zed will run any
scripts that have been enabled for the corresponding zevent class.
Multiple scripts may be invoked for a given zevent. The zevent
nvpairs are passed to the scripts as environment variables.
Events are processed synchronously by the single thread, and there is
no maximum timeout for script execution. Consequently, a misbehaving
script can delay (or forever block) the processing of subsequent
zevents. Plans are to address this in future commits.
Initial scripts have been developed to log events to syslog
and send email in response to checksum/data/io errors and
resilver.finish/scrub.finish events. By default, email will only
be sent if the ZED_EMAIL variable is configured in zed.rc (which is
serving as a config file of sorts until a proper configuration file
is implemented).
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
zpool_events_next() can be called in blocking mode by specifying a
non-zero value for the "block" parameter. However, the design of
the ZFS Event Daemon (zed) requires additional functionality from
zpool_events_next(). Instead of adding additional arguments to the
function, it makes more sense to use flags that can be bitwise-or'd
together.
This commit replaces the zpool_events_next() int "block" parameter with
an unsigned bitwise "flags" parameter. It also defines ZEVENT_NONE
to specify the default behavior. Since non-blocking mode can be
specified with the existing ZEVENT_NONBLOCK flag, the default behavior
becomes blocking mode. This, in effect, inverts the previous use
of the "block" parameter. Existing callers of zpool_events_next()
have been modified to check for the ZEVENT_NONBLOCK flag.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
Due to the very poorly chosen argument name 'cleanup_fd' it was
completely unclear that this file descriptor is used to track the
current cursor location. When the file descriptor is created by
opening ZFS_DEV a private cursor is created in the kernel for the
returned file descriptor. Subsequent calls to zpool_events_next()
and zpool_events_seek() then require the file descriptor as an
argument to reposition the cursor. When the file descriptor is
closed the kernel state tracking the cursor is destroyed.
This patch contains no functional change, it just changes a
few variable names and clarifies the documentation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
3120 zinject hangs in zfsdev_ioctl() due to uninitialized zc
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3120illumos/illumos-gate@f4c46b1eda
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2152
Originally, users had to handle spa namespace collisions by either
exporting the already imported pool or by specifying a new name for the
pool with a conflicting name. In the case of root pools from virtual
guests, neither approach to collision resolution is reasonable. This is
addressed by extending the new name syntax with a -t option to specify
that the new name is temporary. When specified, this sets an internal
flag that is passed into the kernel to tell it that all label updates
should refer to the name used in the original label. Consequently, the
original pool name will be retained on export.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2189
Stopping arcstat.py with ^C always ends up with error:
TypeError: sighandler() takes no arguments (2 given)
Since no special signal handling was done in sighandler(),
it's simpler to just set SIGINT handler to SIG_DFL, which
terminates the script.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#2179
This is just a small bit of cleanup to ensure ztest fails early
on systems where mmap(2) is not functioning. For the automated
testing which is the primary consumer of ztest there is no
functional change because debugging is always enabled.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2177
Valgrind complained about this and it's absolutely right. The
props nvlist was not being freed in ztest_init.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#2174
Stopping arcstat.py with ^C always ends up with error:
TypeError: sighandler() takes no arguments (2 given)
This patch corrects the error by updating the signal handler
to take the correct number of arguments.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2182
Today arcstat.py prints one header every hdr_intr (20 by default)
lines. It would be more consistent with out utilities like vmstat
if hdr_intr defaulted to terminal window size, i.e. one header
per screenful of outputs.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2183
ZoL commit 1421c89 unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit. Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.
The additional field has been removed by the previous commit. However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied. This will return the pools to a state in which they
may be imported by other implementations.
The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted. A message similar to one of the following means your
pool must be scrubbed to restore compatibility.
$ zpool import
pool: zol-0.6.2-173
id: 1165955789558693437
state: ONLINE
status: Errata #1 detected.
action: The pool can be imported using its name or numeric identifier,
however there is a compatibility issue which should be corrected
by running 'zpool scrub'
see: http://zfsonlinux.org/msg/ZFS-8000-ER
config:
...
$ zpool status
pool: zol-0.6.2-173
state: ONLINE
scan: pool compatibility issue detected.
see: https://github.com/zfsonlinux/zfs/issues/2094
action: To correct the issue run 'zpool scrub'.
config:
...
If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported. Further advice on how to proceed will be
provided by the error message as follows.
$ zpool import
pool: zol-0.6.2-173
id: 1165955789558693437
state: ONLINE
status: Errata #2 detected.
action: The pool can not be imported with this version of ZFS due to an
active asynchronous destroy. Revert to an earlier version and
allow the destroy to complete before updating.
see: http://zfsonlinux.org/msg/ZFS-8000-ER
config:
...
Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:
zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w
Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.
The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys. Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.
This patch does have one limitation that should be mentioned. It will not
detect errata #2 on a pool unless errata #1 is also present. It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.
End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL. The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root. This will display a non-zero
value for any pool with an active asynchronous destroy.
Lastly, it is expected that no user data has been lost as a result of
this erratum.
Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
From time to time it may be necessary to inform the pool administrator
about an errata which impacts their pool. These errata will by shown
to the administrator through the 'zpool status' and 'zpool import'
output as appropriate. The errata must clearly describe the issue
detected, how the pool is impacted, and what action should be taken
to resolve the situation. Additional information for each errata will
be provided at http://zfsonlinux.org/msg/ZFS-8000-ER.
To accomplish the above this patch adds the required infrastructure to
allow the kernel modules to notify the utilities that an errata has
been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t
which has been added to the pool configuration nvlist.
To add a new errata the following changes must be made:
* A new errata identifier must be assigned by adding a new enum value
to the zpool_errata_t type. New enums must be added to the end to
preserve the existing ordering.
* Code must be added to detect the issue. This does not strictly
need to be done at pool import time but doing so will make the
errata visible in 'zpool import' as well as 'zpool status'. Once
detected the spa->spa_errata member should be set to the new enum.
* If possible code should be added to clear the spa->spa_errata member
once the errata has been resolved.
* The show_import() and status_callback() functions must be updated
to include an informational message describing the errata. This
should include an action message describing what an administrator
should do to address the errata.
* The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be
updated to describe the errata. This space can be used to provide
as much additional information as needed to fully describe the errata.
A link to this documentation will be automatically generated in the
output of 'zpool import' and 'zpool status'.
Original-idea-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
Both the zpool_import_status() and zpool_get_status() functions
return the zpool_status_t enum. This explicit type should be used
rather than the more generic int type.
This patch makes no functional change and should only be considered
code cleanup. It happens to have been done in the context of #2094
because that's when I noticed this issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
The chunksize must always be strictly smaller than the regionsize.
Signed-off-by: Andrew Uselton <andrew.c.uselton@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2072
The vdev_id udev helper currently applies slot renumbering rules to
every channel (JBOD) in the system. This is too inflexible for systems
with non-homogeneous storage topologies. The "slot" keyword now takes
an optional third parameter which names a channel to which the mapping
will apply. If the third parameter is omitted then the rule applies to
all channels. The first-specified rule that can match a slot takes
precedence. Therefore a channel-specific rule for a given slot should
generally appear before a generic rule for the same slot number. In
this way a custom slot mapping can be applied to a particular channel
and a default mapping applied to the rest.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2056
31fc19399e incorrectly removed $(LIBBLKID)
from cmd/zpool/Makefile.am. This meant that the toolchain was not given
-lblkid, which resulted in the following build failure on Ubuntu 13.10:
/usr/bin/ld: zpool_vdev.o: undefined reference to symbol
'blkid_put_cache@@BLKID_1.0'
/lib/x86_64-linux-gnu/libblkid.so.1: error adding symbols: DSO missing
from command line
collect2: error: ld returned 1 exit status
That commit reworked various Makefile.am to follow best practices, so we
reintroduce $(LIBBLKID) in a manner consistent with that, rather than
explicitly reverting the change.
Reproduction of this issue was done on a Gentoo Linux system by
executing the following commands:
zfs create -o mountpoint=/mnt/ubuntu-13.10 rpool/ROOT/ubuntu-13.10
debootstrap --variant=buildd --arch amd64 saucy /mnt/ubuntu-13.10 http://archive.ubuntu.com/ubuntu/
mount -o bind /dev /mnt/ubuntu-13.10/dev/
mount -o bind /proc/ /mnt/ubuntu-13.10/proc/
mount -o bind /sys/ /mnt/ubuntu-13.10/sys/
cp /etc/resolv.conf /mnt/ubuntu-13.10/etc/
(cd /mnt/ubuntu-13.10/root/ && git clone git://github.com/zfsonlinux/zfs.git)
chroot /mnt/ubuntu-13.10/
apt-get install git autoconf libtool zlib1g-dev uuid-dev libblkid-dev
\#apt-get install alien fakeroot vim
cd /root/zfs
./autogen.sh
./configure --with-config=user --prefix=/usr
make
That will create a Ubuntu 13.10 chroot, fetch the sources and build
test. At this point, cmd/zpool/Makefile.am was modified and the
following commands were run to verify that the build issue was resolved:
git clean -xdf
./autogen.sh
./configure --with-config=user --prefix=/usr
make
Although it is not shown here, the absence of libblkid-dev enables ZFS
to build successfully without the patch. This could explain how this
escaped detection until recently. A test without libblkid-dev was done
to verify that the patch did not cause a regression in the absence of
libblkid:
apt-get remove libblkid-dev
git clean -xdf
./autogen.sh
./configure --with-config=user --prefix=/usr
make
Additionally, the commands themselves were tested against my live system
from within the chroot to ensure basic functionality. My live system had
corresponding kernel modules already installed and basic commands such
as `zpool list` and `zfs list` worked without incident. Lastly, this
patch was also build tested on Gentoo Linux, where it caused no
problems.
At time of writing, these steps can be used to reproduce these results
on any modern Linux system that has debootstrap installed. On Gentoo,
installing debootstrap can be done with `emerge dev-util/debootstrap`.
The current ZFSOnLinux HEAD revision as of writing is
fd23720ae1. Once this is fixed in HEAD,
either that revision or another before this fix and after
31fc19399e will be needed to reproduce
this issue.
Lastly, it remains to be seen why the toolchains on the systems
performing regression tests did not catch this. This is not a
ZFS-specific issue, but it is something that we will want to explore in
the future.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2038
Re-enable the /etc/mtab cache to prevent the zfs command from
having to repeatedly open and read from the /etc/mtab file.
Instead an AVL tree of the mounted filesystems is created and
used to vastly speed up lookups. This means that if non-zfs
filesystems are mounted concurrently the 'zfs mount' will not
immediately detect them. In practice that will rarely happen
and even if it does the absolute worst case would be a failed
mount. This was originally disabled out of an abundance of
paranoia.
NOTE: There may still be some parts of the code which do not
consult the mtab cache. They should be updated to check the
mtab cache as they as discovered to be a problem.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #845
Move the libzfs_fini() after the zpool_log_history() call so the
ZPOOL_HIST_CMD entry can get written.
Fix the handling of saved_poolname in zfsdev_ioctl()
which was broken as part of the stack-reduction work in
a168788053.
Since ZoL destroys the TSD data in which the previously successful
ioctl()'s pool name is stored following every vop, the ZFS_IOC_LOG_HISTORY
ioctl has a very important restriction: it can only successfully write
a long entry following a successful ioctl() if no intervening vops have
been performed. Some of zfs subcommands do perform intervening vops and
to do the logging themselves. At the moment, the "create" and "clone"
subcommands have been modified appropriately.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1998
Four new dataset properties have been added to support SELinux. They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8). When one of
these properties is set to something other than 'none'. That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.
For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:
$ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media
This will ensure the filesystem is automatically mounted with that
rootcontext. It is equivalent to manually specifying the rootcontext
with the -o option like this:
$ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media
By default all four contexts are set to 'none'. Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#1504
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written. Others were
caused when the common code was slightly adjusted for Linux.
This patch contains no functional changes. It only refreshes
the code to conform to style guide.
Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request. The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1821
4208 Typo in zfs_main.c: "posxiuser"
Reviewed by: Sonu Pillai <sonu.pillai@delphix.com>
Reviewed by: Will Guyette <will.guyette@delphix.com>
Reviewed by: Eric Diven <eric.diven@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/4208illumos/illumos-gate@f38cb554a5
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1986
Add acl, noacl and posixacl to option_map, avoiding ENOENT error
case when mount from util-linux-2.24 execs mount.zfs with any of
those flags
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: renelson <bnelson@nelsonbe.com>
Issue #1968
A minor grammar error was corrected in in the parse_options()
error handling for the ENOENT case.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: renelson <bnelson@nelsonbe.com>
Issue #1968
The bug is caused by multipath output like this:
35000c50056bd77a7 dm-15 HP,MB3000FCWDH
size=2.7T features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=0 status=active
| `- 2:0:16:0 sdq 65:0 active undef running
`-+- policy='round-robin 0' prio=0 status=enabled
`- 4:0:52:0 sdfp 130:176 active undef running
Note that the pipe symbols mean that the field numbering is different
between the sdq and sdfp lines. The fix edits out the pipe symbols.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1692
Added:
Adata S396 (obtained from drive_id)
Apple MacBookAir3,1 SSD (obtained from drive_id)
Apple MacBookPro10,1 SSD (obtained from drive_id)
Intel 510 (obtained from drive_id)
Intel 710 (obtained from drive_id)
Intel DC S3500 (obtained from drive_id)
Netapp LUN (obtained from illumos user's sd.conf)
OCZ Agility 3 (obtained from drive_id)
OCZ Vertex (obtained from drive_id)
Samsung PM800 (obtained from drive_id)
Sandisk U100 (obtained from drive_id)
Sun Comstar (obtained from illumos user's sd.conf)
Notes:
1. The entries for the Intel DC S3500 were extrapolated from the 800GB
model's entry, which is "ATA INTEL SSDSC2BB80".
2. The entires for the Intel 710 were extrapolated from the 120GG
model's entry, which is "ATA INTEL SSDSA2BZ12".
3. The entires for the Intel 510 were extrapolated from the 250GB
model's entry, which is "ATA INTEL SSDSC2MH25".
4. The entires for the Apple MacBookPro10,1 SSD were extrapolated from
the 512GB model's entry, which is "ATA APPLE SSD SM512E". Google
searches suggest that this is a rebadged Samsung 830.
5. The entires for the Apple MacBookAir3,1 SSD were extrapolated from
the 128GB model's entry, which is "ATA APPLE SSD TS128C". Google
searches suggest that this is a rebadged Kingston SSDNow V+ 100 (based
on Toshiba).
6. Sun Comstar is an iSCSI Target, so we cannot tell what the correct
sector size is through this method. We list it only for reference
purposes, but it is commented out. Similarly, it is not clear what the
right thing to do for Netapp is, so we comment it out.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1907
On some platforms symbols provided by libzfs_core and used by
libzfs were not available to the linker. To avoid this issue
libzfs_core has been added to the list of required libraries
when building utilities which depend on libzfs. This should
have been handled properly by libtool and it's still not
entirely clear why it wasn't on all platforms.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1841
Future proofing for compatibility with newer versions of Python.
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1838
Update the code to follow the pep8 style guide.
References:
http://www.python.org/dev/peps/pep-0008/
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1838
In the current snapshot automount implementation, it is possible for
multiple mounts to attempted concurrently. Only one of the mounts will
succeed and the other will fail. The failed mounts will cause an EREMOTE
to be propagated back to the application.
This commit works around the problem by adding a new exit status,
MOUNT_BUSY to the mount.zfs program which is used when the underlying
mount(2) call returns EBUSY. The zfs code detects this condition and
treats it as if the mount had succeeded.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1819
3956 ::vdev -r should work with pipelines
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3956https://www.illumos.org/issues/3957https://www.illumos.org/issues/3958https://www.illumos.org/issues/3959https://www.illumos.org/issues/3960https://www.illumos.org/issues/3961https://www.illumos.org/issues/3962illumos/illumos-gate@b4952e17e8
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting notes:
1. zfs_dbgmsg_print() is only used in userland. Since we do not have
mdb on Linux, it does not make sense to make it available in the
kernel. This means that a build failure will occur if any future
kernel patch depends on it. However, that is unlikely given that
this functionality was added to support zdb.
2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels.
This preserves the existing behavior of minimal noise when running
with -V, and -VV.
3. In vdev_config_generate() the call to nvlist_alloc() was not
changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in
the txg_sync context.
3949 ztest fault injection should avoid resilvering devices
3950 ztest: deadman fires when we're doing a scan
3951 ztest hang when running dedup test
3952 ztest: ztest_reguid test and ztest_fault_inject don't place nice together
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3949https://www.illumos.org/issues/3950https://www.illumos.org/issues/3951https://www.illumos.org/issues/3952illumos/illumos-gate@2c1e2b4414
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Porting notes:
1. The deadman thread was removed from ztest during the original
port because it depended on Solaris thr_create() interface.
This functionality should be reintroduced using the more
portable pthreads.
3112 ztest does not honor ZFS_DEBUG
3113 ztest should use watchpoints to protect frozen arc bufs
3114 some leaked nvlists in zfsdev_ioctl
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Amdur <Matt.Amdur@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>
References:
https://www.illumos.org/issues/3112https://www.illumos.org/issues/3113https://www.illumos.org/issues/3114illumos/illumos-gate@cd1c8b85eb
The /proc/self/cmd watchpoint interface is specific to Solaris.
Therefore, the #3113 implementation was reworked to use the more
portable mprotect(2) system call. When the pages are watched they
are marked read-only for protection. Any write to the protected
address range immediately trigger a SIGSEGV. The pages are marked
writable again when they are unwatched.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1489
3236 zio nop-write
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
illumos/illumos-gate@80901aea8ehttps://www.illumos.org/issues/3236
Porting Notes
1. This patch is being merged dispite an increased instance of
https://www.illumos.org/issues/3113 being triggered by ztest.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1489
3894 zfs should not allow snapshot of inconsistent dataset
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/3894illumos/illumos-gate@ca48f36f20
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
3740 Poor ZFS send / receive performance due to snapshot
hold / release processing
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3740illumos/illumos-gate@a7a845e4bf
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Porting notes:
1. 13fe019870 introduced a merge conflict
in dsl_dataset_user_release_tmp where some variables were moved
outside of the preprocessor directive.
2. dea9dfefdd747534b3846845629d2200f0616dad made the previous merge
conflict worse by switching KM_SLEEP to KM_PUSHPAGE. This is notable
because this commit refactors the code, adding a new KM_SLEEP
allocation. It is not clear to me whether this should be converted
to KM_PUSHPAGE.
3. We had a merge conflict in libzfs_sendrecv.c because of copyright
notices.
4. Several small C99 compatibility fixed were made.
3745 zpool create should treat -O mountpoint and -m the same
3811 zpool create -o altroot=/xyz -O mountpoint=/mnt ignores
the mountpoint option
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3745https://www.illumos.org/issues/3811illumos/illumos-gate@8b71377531
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
3603 panic from bpobj_enqueue_subobj()
3604 zdb should print bpobjs more verbosely
3871 GCC 4.5.3 does not like issue 3604 patch
Reviewed by: Henrik Mattson <henrik.mattson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://www.illumos.org/issues/3603https://www.illumos.org/issues/3604https://www.illumos.org/issues/3871illumos/illumos-gate@d04756377d
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Note that the patch from Illumos issue 3871 is not accepted into Illumos
at the time of this writing. It is something that I wrote when porting
this. Documentation is in the Illumos issue.
This works the same as the -p switch to "zfs get", displaying full
resolution values for appropriate attributes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1813
The dbufstat.py command was added to provide a conveniant way to
easily determine what ZFS is caching. The script consumes the
raw /proc/spl/kstat/zfs/dbufs kstat data can consolidates it in
to a more human readable form. This was designed primarily as
a tool to aid developers but it may also be useful for advanced
users who want more visibility in to what the ARC is caching.
When run without options dbufstat.py will default to showing a
list of all objects with at least one buffer present in the
cache. The total cache space consumed by that object will be
printed on the right along with the object type. Similar to the
arcstats.py command the -x option may used to display additional
fields.
Two other modes of operation are also supported by dbufstat.py
and the expectation is additional display modes may be added as
needed. The -t option will summerize the total number of bytes
cached for each object type, and the -b option will show every
dbuf currently cached.
The script was designed to be consistent with arcstat.py and
includes most of the same options and funcationality.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When creating a new pool, or adding/replacing a disk in an existing
pool, partition tables will be automatically created on the devices.
Under normal circumstances it will take less than a second for udev
to create the expected device files under /dev/. However, it has
been observed that if the system is doing heavy IO concurrently udev
may take far longer. If you also throw in some cheap dodgy hardware
it may take even longer.
To prevent zpool commands from failing due to this the default wait
time for udev is being increased to 30 seconds. This will have no
impact on normal usage, the increase timeout should only be noticed
if your udev rules are incorrectly configured.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1646
Document the "-D" and "-T" options and the optional interval
and count or "zpool status".
Also for zpool's man page, use a consistent order for the
various "-T" options to match the program's help output.
Document the effect of additional "-D" options for zdb.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1786
Libraries that depend on other libraries should list them in ELF's
DT_NEEDED field so that programs linking to them do not need to specify
those libraries unless they depend on them as well. This is not the case
in the current code and the consequence is that anything that needs a
library must know its dependencies. This is fragile and caused GRUB2's
configure script to break when a dependency was added on libblkid in
libzfs.
This resolves that problem by using LIBADD/LDADD to specify libraries in
Makefile.am instead of LDFLAGS. This ensures that proper DT_NEEDED
entries are generated and prevents GRUB2's configure script from
breaking in the presence of a libblkid dependency. This also removes
unneeded dependencies from various files.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1751
Add Corsair Force GS drive (obtained from drive_id)
Add Kingston HyperX 3K (obtained from drive_id)
Add OCZ Vertex 4 drive (obtained from drive_id)
Add Samsung SM843T enterprise drive (obtained from drive_id)
Add entries for additional sizes of Intel 320/330/335/520 series
Add Cruical C400 (obtained from Illumos user's sd.conf)
Add Toshiba SSD (obtained from Illumos user's sd.conf)
Add Samsung's first SLC SSD (obtained from drive_id)
Add OCZ Core Series (obtained from drive_id)
Add Intel DC S3700 (obtained from drive_id)
Notes:
1. The drive identifer obtained for the Samsung SM843T was MZ7WD480. The
rest were extrapolated. The additional entries were checked with Google
to verify that such drives exist in the wild.
2. The additional entries for Intel drives were extrapolated from
existing entries. The additional entries were checked with Google to
verify that such drives exist in the wild.
3. The "ATA C400-MTFDDAC512M" and "ATA TOSHIBA THNSNH51" entries
are from the sd.conf of gcbirzan on freenode. Additional entries were
extrapolated from them and checked with Google.
4. I obtained the Samsung MCCOE64G entry from an actual drive. The
Samsung MCCOE32G entry was extrapolated from it and checked with
Google.
5. I obtained the SSDSC2BA10 from a 100GB Intel DC S3700 drive and
extrapolated the entries for the additional models.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1752
2882 implement libzfs_core
2883 changing "canmount" property to "on" should not always remount dataset
2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>
References:
https://www.illumos.org/issues/2882https://www.illumos.org/issues/2883https://www.illumos.org/issues/2900illumos/illumos-gate@4445fffbbb
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1293
Porting notes:
WARNING: This patch changes the user/kernel ABI. That means that
the zfs/zpool utilities built from master are NOT compatible with
the 0.6.2 kernel modules. Ensure you load the matching kernel
modules from master after updating the utilities. Otherwise the
zfs/zpool commands will be unable to interact with your pool and
you will see errors similar to the following:
$ zpool list
failed to read pool configuration: bad address
no pools available
$ zfs list
no datasets available
Add zvol minor device creation to the new zfs_snapshot_nvl function.
Remove the logging of the "release" operation in
dsl_dataset_user_release_sync(). The logging caused a null dereference
because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the
logging functions try to get the ds name via the dsl_dataset_name()
function. I've got no idea why this particular code would have worked
in Illumos. This code has subsequently been completely reworked in
Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring).
Squash some "may be used uninitialized" warning/erorrs.
Fix some printf format warnings for %lld and %llu.
Apply a few spa_writeable() changes that were made to Illumos in
illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and
3115 fixes.
Add a missing call to fnvlist_free(nvl) in log_internal() that was added
in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time
(zfsonlinux/zfs@9e11c73) because it depended on future work.
This implements vdev_bdev_database_check(). It alters the detected
sector size of any device listed in a database of drives known to lie
about their physical sector sizes.
This is based on "6931570 Add flash devices' VID/PID to disk table to
advertising 4K physical sector size" from Open Solaris and on
sg_simple4.c from sg3_utils. About two dozen lines are taken from
sg_simple4.c, which is GPLv2 licensed. However, sg_simple4.c is
analogous to a Hello World program and is safe for us to use. We
requested that Douglas Gilbert, the author of sg_simple4.c, confirm that
this is the case. A cutdown version of his response is as follows:
```
I would consider a SCSI INQUIRY example using the Linux sg
driver interface (also written by me) as the equivalent of an
"hello world" program in C.
```
The database was created with the help of the freenode and ZFSOnLinux
communities.
Some notes:
1. The following drives both were confirmed to lie via reports in IRC
and they contain capacity information in their identifiers:
INTEL SSDSA2M080
INTEL SSDSA2M160
M4-CT256M4SSD2
WDC WD15EARS-00S
WDC WD15EARS-00Z
WDC WD20EARS-00M
The identifiers for different capacity models were extrapolated and
added under the assumption that those models also lie. Google was used
to verify that the extrapolated drive identifiers existed prior to their
inclusion.
2. The OCZ-VERTEX2 3.5 identifer applies to two drives that differ
solely in page size (and slightly in capacity). One uses 4096-byte pages
and the other uses 8192-byte pages. Both are set to use 8192-byte pages.
We could detect the page size by checking the capacity, but that would
unnecessarily complicate the code.
3. It is possible for updated drive firmware to correctly report the
sector size. There were reports of a few advanced format drives doing
that. One report stated that the vendor changed the identification
string while another was unclear on this. Both reports involved WDC
models.
4. Google was used to determine the size of pages in the listed flash
devices. Reports of 8192-byte pages took precedence over reports of
4096-byte pages.
5. Devices behind USB adapters can have their identification strings
altered. Identification strings obtained across USB adapters are
omitted and no attempt is made to correct for alterations made by USB
adapters when doing comparisons against the database. Two entries in the
Open Solaris database that appear to have been altered by a USB
adapter were omitted.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1652
For the same reasons it's used in libzfs_init(), this was just
overlooked because zinject gets minimal use.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1498
3098 zfs userspace/groupspace fail without saying why when run as non-root
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3098illumos/illumos-gate@70f56fa693
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1596
Due to an uninitialized variable it was possible for the command
'zpool list -H' to return a non-zero error when there are no pools.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1605
The FreeBSD implementation of zfs adds the 'zpool labelclear'
command. Since this functionality is helpful and straight
forward to add it is being included in ZoL.
References:
freebsd/freebsd@119a041dc9
Ported-by: Dmitry Khasanov <pik4ez@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1126
If the znode has SA xattrs, display them following the other
standard attributes. The format used is similar to that used
when listing the contents of a ZAP. It is as follows:
$ zdb -vvv <pool>/<dataset> <object>
...
SA xattrs: <size> bytes, <number> entries
<name1> = <value1>
<name2> = <value2>
...
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1581
Make sure that buffer is aligned to 512 bytes on linux so that
pread call combined with O_DIRECT does not return EINVAL.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1570
For "zpool events -f" flush stdout to ensure the last zevent
is always printed immediately.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1568
A mount failure was accidentally introduced by commit 0c1171d
which reworked the parse_dataset() function to read pool names
from devices. The error case where a label is read from the
device but the pool name/value pair doesn't exist was not
handled properly. In this case we should fall back to the
previous behavior.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1560
This silences a GCC 4.8.0 warning by fixing a programming error
caught by static analysis:
../../cmd/ztest/ztest.c: In function ‘ztest_vdev_aux_add_remove’:
../../cmd/ztest/ztest.c:2584:33: error: argument to ‘sizeof’
in ‘snprintf’ call is the same expression as the destination;
did you mean to provide an explicit length?
[-Werror=sizeof-pointer-memaccess]
(void) snprintf(path, sizeof (path), ztest_aux_template,
^
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1480
When using zdb with non-default SPA config file it is not convenient
to add -U <non-default-config-file-path> all the time. This commit
introduces support for setting/overriding SPA config location via
environment variable 'SPA_CONFIG_PATH'.
If -U flag is specified in the command line it will override any other
value as usual.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1545
To simplify integration with the xfstests test suite the
mount.zfs helper has been extended. When passed a block
device (/dev/sdX) to mount, instead of a pool/dataset,
the pool name will be read from any existing zfs label
and used. This allows you to mount the root dataset of
a zfs filesystem by specifing any of the member vdevs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3552 condensing one space map burns 3 seconds of CPU in spa_sync() thread
3564 spa_sync() spends 5-10% of its time in metaslab_sync() (when not condensing)
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
illumos/illumos-gate@16a4a80742https://www.illumos.org/issues/3552https://www.illumos.org/issues/3564
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1513
3006 VERIFY[S,U,P] and ASSERT[S,U,P] frequently check if first
argument is zero
Reviewed by Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by George Wilson <george.wilson@delphix.com>
Approved by Eric Schrock <eric.schrock@delphix.com>
References:
illumos/illumos-gate@fb09f5aad4https://illumos.org/issues/3006
Requires:
zfsonlinux/spl@1c6d149feb
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1509
* Modified kstat_update() to read arcstats from proc.
* Fix shebang.
* Added Makefile.am entries for arcstat.py
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1506
When calling mount(), care must be taken to avoid passing in flags
that are used only by the user space utilities. Otherwise we may
stomp on flags that are reserved for other purposes in the kernel.
In particular, openSUSE 12.3 kernels have added a new MS_RICHACL
super-block flag whose value conflicts with our MS_COMMENT flag. This
causes incorrect behavior such as the umask being ignored. The
MS_COMMENT flag essentially serves as a placeholder in the option_map
data structure of zfs_mount.c, but its value is never used. Therefore
we can avoid the conflict by defining it to 0.
The MS_USERS, MS_OWNER, and MS_GROUP flags also conflict with reserved
flags in the kernel. While this is not known to have caused any
problems, it is nevertheless incorrect. For the purposes of the
mount.zfs helper, the "users", "owner", and "group" options just serve
as hints to set additional implied options. Therefore we now define
their associated mount flags in terms of the options that they imply
rather than giving them unique values.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1457
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man
page and help
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
illumos/illumos-gate@31d7e8fa33https://www.illumos.org/issues/3306https://www.illumos.org/issues/3321
The vdev_file.c implementation in this patch diverges significantly
from the upstream version. For consistenty with the vdev_disk.c
code the upstream version leverages the Illumos bio interfaces.
This makes sense for Illumos but not for ZoL for two reasons.
1) The vdev_disk.c code in ZoL has been rewritten to use the
Linux block device interfaces which differ significantly
from those in Illumos. Therefore, updating the vdev_file.c
to use the Illumos interfaces doesn't get you consistency
with vdev_disk.c.
2) Using the upstream patch as is would requiring implementing
compatibility code for those Solaris block device interfaces
in user and kernel space. That additional complexity could
lead to confusion and doesn't buy us anything.
For these reasons I've opted to simply move the existing vn_rdwr()
as is in to the taskq function. This has the advantage of being
low risk and easy to understand. Moving the vn_rdwr() function
in to its own taskq thread also neatly avoids the possibility of
a stack overflow.
Finally, because of the additional work which is being handled by
the free taskq the number of threads has been increased. The
thread count under Illumos defaults to 100 but was decreased to 2
in commit 08d08e due to contention. We increase it to 8 until
the contention can be address by porting Illumos #3581.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1354
The zfs_fd must be opened before calling print_all_handlers() or
the ioctl() cannot be used to the zfs control device. This brings
the zinject code back in sync with the Illumos implementation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
NOTES: This patch has been reworked from the original in the
following ways to accomidate Linux ZFS implementation
*) Usage of the cyclic interface was replaced by the delayed taskq
interface. This avoids the need to implement new compatibility
code and allows us to rely on the existing taskq implementation.
*) An extern for zfs_txg_synctime_ms was added to sys/dsl_pool.h
because declaring externs in source files as was done in the
original patch is just plain wrong.
*) Instead of panicing the system when the deadman triggers a
zevent describing the blocked vdev and the first pending I/O
is posted. If the panic behavior is desired Linux provides
other generic methods to panic the system when threads are
observed to hang.
*) For reference, to delay zios by 30 seconds for testing you can
use zinject as follows: 'zinject -d <vdev> -D30 <pool>'
References:
illumos/illumos-gate@283b84606bhttps://www.illumos.org/issues/3246
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1396
A few files still refer to @behlendorf's private fork on
github. Use the primary web site URL instead. Two typos
are also corrected.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The PaX team modified the kernel's modpost to report writeable function
pointers as section mismatches because they are potential exploit
targets. We could ignore the warnings, but their presence can obscure
actual issues. Proper const correctness can also catch programming
mistakes.
Building the kernel modules against a PaX/GrSecurity patched Linux 3.4.2
kernel reports 133 section mismatches prior to this patch. This patch
eliminates 130 of them. The quantity of writeable function pointers
eliminated by constifying each structure is as follows:
vdev_opts_t 52
zil_replay_func_t 24
zio_compress_info_t 24
zio_checksum_info_t 9
space_map_ops_t 7
arc_byteswap_func_t 5
The remaining 3 writeable function pointers cannot be addressed by this
patch. 2 of them are in zpl_fs_type. The kernel's sget function requires
that this be non-const. The final writeable function pointer is created
by SPL_SHRINKER_DECLARE. The kernel's set_shrinker() and
remove_shrinker() functions also require that this be non-const.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1300
The issue with hot spares in ZoL is because it opens all leaf
vdevs exclusively (O_EXCL). On Linux, exclusive opens cause
subsequent exclusive opens to fail with EBUSY.
This could be resolved by not opening any of the devices
exclusively, which is what Illumos does, but the additional
protection offered by exclusive opens is desirable. It cleanly
prevents you from accidentally adding an in-use non-ZFS device
to your pool.
To fix this we very slightly relaxed the usage of O_EXCL in
the following ways.
1) Functions which open the device but only read had the
O_EXCL flag removed and were updated to use O_RDONLY.
2) A common holder was added to the vdev disk code. This
allow the ZFS code to internally open the device multiple
times but non-ZFS callers may not.
3) An exception was added to make_disks() for hot spare when
creating partition tables. For hot spare devices which
are already opened exclusively we skip creating the partition
table because this must already have been done when the disk
was originally added as a hot spare.
Additional minor changes include fixing check_in_use() to use
a partition instead of a slice suffix. And is_spare() was moved
above make_disks() to avoid adding a forward reference.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#250
`zpool status -x` should only flag errors or where the pool is
unavailable. If it imported fine but isn't using the latest features
available in the code, that's not an error.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1319
This is a minor nit, but the second line of the 'action' message
when you need to upgrade your pool to support feature flags exceeds
the standard 80 character limit. Fix it by moving the word
'feature' on to the third line.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In the interest of maintaining only one udev helper to give vdevs
user friendly names, the zpool_id and zpool_layout infrastructure
is being retired. They are superseded by vdev_id which incorporates
all the previous functionality.
Documentation for the new vdev_id(8) helper and its configuration
file, vdev_id.conf(5), can be found in their respective man pages.
Several useful example files are installed under /etc/zfs/.
/etc/zfs/vdev_id.conf.alias.example
/etc/zfs/vdev_id.conf.multipath.example
/etc/zfs/vdev_id.conf.sas_direct.example
/etc/zfs/vdev_id.conf.sas_switch.example
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#981
The vdev_id udev helper strictly requires configuration file keywords
to always be anchored at the beginning of the line and to be followed
by a space character. However, users may prefer to use indentation or
tab delimitation. Improve flexibility by simply requiring a keyword
to be the first field on the line.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1239
1337 `zpool status -D' should tell if there are no DDT entries
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
References:
illumos/illumos-gate@ce72e614c1
illumos changeset: 13432:d1ad8d106d64
https://www.illumos.org/issues/1337
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
A fsck helper to accomidate distributions that expect to be able
to execute a fsck on all filesystem types. Currently this script
does nothing but it could be extended to act as a compatibility
wrapper for 'zpool scrub'.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#964
Rather than just reporting the failure include the passed
mount point and error number.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1153
3349 zpool upgrade -V bumps the on disk version number, but leaves
the in core version
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
illumos/illumos-gate@25345e4666https://www.illumos.org/issues/3349
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2762 zpool command should have better support for feature flags
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>
References:
illumos/illumos-gate@57221772c3https://www.illumos.org/issues/2762
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
3090 vdev_reopen() during reguid causes vdev to be treated as corrupt
3102 vdev_uberblock_load() and vdev_validate() may read the wrong label
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>
References:
illumos/illumos-gate@dfbb943217
illumos changeset: 13777:b1e53580146d
https://www.illumos.org/issues/3090https://www.illumos.org/issues/3102
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#939
This reverts commit d135245791.
Since feature flags have now been merged we can apply the real
upstream fix from Illumos.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #997
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>
References:
illumos/illumos-gate@53089ab7c8illumos/illumos-gate@ad135b5d64
illumos changeset: 13700:2889e2596bd6
https://www.illumos.org/issues/2619https://www.illumos.org/issues/2747
NOTE: The grub specific changes were not ported. This change
must be made to the Linux grub packages.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
mountall in Debian depends on being able to pass the -f parameter to
mount, which specifies a fake mount and just updates the mtab. Currently
mount.zfs will fail such a request if it is not passed with -o zfsutil.
This patch allows a fake mount on a non-legacy filesystem to succeed in
the same manner as a -o remount does, thus enabling mountall to work
correctly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1167
Add a vdev_id feature to map device names based on already defined
udev device links. To increase the odds that vdev_id will run after
the rules it depends on, increase the vdev.rules rule number from 60
to 69. With this change, vdev_id now provides functionality analogous
to zpool_id and zpool_layout, paving the way to retire those tools.
A defined alias takes precedence over a topology-derived name, but the
two naming methods can otherwise coexist. For example, one might name
drives in a JBOD with the sas_direct topology while naming an internal
L2ARC device with an alias.
For example, the following lines in vdev_id.conf will result in the
creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same
target as the device link specified in the third field.
# by-vdev
# name fully qualified or base name of device link
alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca
alias d2 wwn-0x5000c5002def789e
Also perform some minor vdev_id cleanup, such as removal of the unused
-s command line option.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#981
Commit df83110856 missed update to
getopt() call, while delivering all the rest. This commit adds
"o" to getopt().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #566
While expanding positional parameters shell requires non-single
digits to be enclosed in braces. When the SAS topology is
non-trivial the number of positional parameters generated internally
by vdev_id script (using set -- ...) easily crosses single digit limit
and vdev_id fails to generate links.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1119
Full bash may not be available in all environments where udev helpers
run, such as in an initial ramdisk. To avoid breakage in this case,
remove use of bash-specific features such as variable arrays and the
`declare' keyword from the vdev_id script.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#870
Canonicalize the mount point passed to the mount.zfs helper.
This way a clean path is always added to mtab which ensures
the umount can properly locate and remove the entry.
Test case:
$ mkdir /mnt/foo
$ mount -t zfs zpool/foo /mnt/../mnt/foo////
$ umount /mnt/foo
$ cat /etc/mtab | grep zpool/foo
zpool/foo /mnt/../mnt/foo//// zfs rw 0 0
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#573
When adding devices to an existing pool "ashift" property is
auto-detected. However, if this property was overridden at
the pool creation time (i.e. zpool create -o ashift=12 tank ...)
this may not be what the user wants. This commit lets the user
specify the value of "ashift" property to be used with newly
added drives. For example,
zpool add -o ashift=12 tank disk1
zpool attach -o ashift=12 tank disk1 disk2
Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#566
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Refererces to Illumos issue:
https://www.illumos.org/issues/2671
This patch has been slightly modified from the upstream Illumos
version. In the upstream implementation a warning message is
logged to the console. To prevent pointless console noise this
notification is now posted as a "ereport.fs.zfs.vdev.bad_ashift"
event.
The event indicates a non-optimial (but entirely safe) ashift
value was used to create the pool. Depending on your workload
this may impact pool performance. Unfortunately, the only way
to correct the issue is to recreate the pool with a new ashift.
NOTE: The unrelated fix to the comment in zpool_main.c appears
in the upstream commit and was preserved for consistnecy.
Ported-by: Cyril Plisko <cyril.plisko@mountall.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#955
The interface for the ddt_zap_count() function assumes it can
never fail. However, internally ddt_zap_count() is implemented
with zap_count() which can potentially fail. Now because there
was no way to return the error to the caller a VERIFY was used
to ensure this case never happens.
Unfortunately, it has been observed that pools can be damaged in
such a way that zap_count() fails. The result is that the pool can
not be imported without hitting the VERIFY and crashing the system.
This patch reworks ddt_object_count() so the error can be safely
caught and returned to the caller. This allows a pool which has
be damaged in this way to be safely rewound for import.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#910
The 'zpool replace' command would fail when given a short name
because unlike on other platforms the short name cannot be
deterministically expanded to a single path. Multiple path
prefixes must be checked and in addition the partition suffix
for whole disks is determined by the prefix.
To handle this complexity a zfs_strcmp_pathname() function was
added which takes either a short or fully qualified device name.
Short names will be expanded using the prefixes in the default
import search path, or the ZPOOL_IMPORT_PATH environment variable
if it's defined. All posible expansions are then compared against
the comparison path. Care is taken to strip redundant slashes to
ensure legitimate matches are not missed.
In the context of this work the existing zfs_resolve_shortname()
function was extended to consider the ZPOOL_IMPORT_PATH when set.
The zfs_append_partition() interface was also simplified to take
only a single buffer.
The vast majority of these changes rework existing Linux specific
code which was originally written to accomidate udev. However,
there is some minimal cleanup which removes Illumos specific code.
This was done to improve readability but the basic flow and intent
of the upstream code was maintained.
These changes are the logical conclusion of the previos work to
adjust the 'zpool import' search behavior, see commit 44867b6a.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#544Closes#976
The ztest deadman timer has been causing false positives in the
testing VMs. To make it easier to spot possible regressions
I'm disabling this timer. The buildbot test infrastructure
will still mark ztest instances which take to long to complete
as failures.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1018
The realpath(3) function expects that when a buffer is passed
for the 'resolved_path' that it be at least PATH_MAX in length.
If it's not a buffer overflow may occur.
Therefore the passed buffer size is changed from MAXNAMELEN to
MAXPATHLEN. We also take this opertunity to dynamically allocate
the buffer to keep it off the stack.
warning: call to '__realpath_chk_warn' declared with attribute
warning: second argument of realpath must be either NULL or at
least PATH_MAX bytes long buffer [enabled by default]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Under Linux the following functions are flagged with the
attribute warn_unused_result, this triggers a warning when
ever they are used without checking the return value.
To handle this case we check the result VERIFY(). It's
better to detect this immediately on failure rather than
segfault farther down in the function.
../../cmd/ztest/ztest.c:6033:2: warning:
ignoring return value of 'asprintf', declared with
attribute warn_unused_result [-Wunused-result]
../../cmd/ztest/ztest.c:739:3: warning:
ignoring return value of 'realpath', declared with
attribute warn_unused_result [-Wunused-result]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The use of tempnam() is racy and it should be avoided in favor of
mkstemp(). According to the Linux tempnam(3) man page.
"Although tempnam() generates names that are difficult to guess,
it is nevertheless possible that between the time that tempnam()
returns a pathname, and the time that the program opens it, another
program might create that pathname using open(2), or create it as
a symbolic link. This can lead to security holes. To avoid such
possibilities, use the open(2) O_EXCL flag to open the pathname.
Or better yet, use mkstemp(3) or tmpfile(3)."
This issue was flagged by gcc.
ztest.o: In function `setup_data_fd': cmd/ztest/ztest.c:5822:
warning: the use of `tempnam' is dangerous, better use `mkstemp'
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
To ensure ztest behaves as similarly as possible to the kernel
implementation of ZFS we attempt to honor the kernel stack limits.
This includes keeping the individual stack frame sizes under 1K
in size. We currently use gcc to detect and enforce this limit.
Therefore to get this building cleanly with full debugging enabled
the stack usage in the following functions has been reduced by
moving the buffer to the heap.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Currently, ztest expects to get 3 and 4 as the file descriptors for
data and random files, respectively. This is quite fragile and breaks
easily if ztest is run with these file descriptors already opened
(e.g. in a complex shell script).
This patch fixes the issue by removing the assumptions on the file
descriptor numbers that open() returns.
For the random file (/dev/urandom), the new code doesn't rely on a
shared file descriptor; instead, it reopens the file in the child.
For the data file, the new code writes the file descriptor number into
a "ZTEST_FD_DATA" environment variable so that it can be recovered
after the execv() call.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
illumos/illumos-gate@ad135b5d64
Illumos changeset: 13700:2889e2596bd6
Note that this is only a partial port of the aforementioned Illumos
changeset.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>
Ported to zfsonlinux by: Etienne Dechamps <etienne.dechamps@ovh.net>
Currently, ztest fails with the following error:
error: Pool 'ztest' has encountered an uncorrectable I/O failure
and the failure mode property for this pool is set to panic.
We know how to fix it (see issue #939), but it may take some time
before we get around to merging the fix, which has some heavy
dependencies.
In the mean time, it is not ideal to be unable to use ztest just
because of a small isolated issue, so this patch works around the
problem by disabling the reguid test. This is just a temporary hack to
keep ztest usable.
The reguid test will be enabled again when the proper fix is merged.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#997
Currently, in several instances (but not all), ztest generates vdev
file paths using a statement similar to this:
snprintf(path, sizeof (path), ztest_dev_template, ...);
This worked fine until 40b84e7aec, which
changed path to be a pointer to the heap instead of an array allocated
on the stack. Before this change, sizeof(path) would return the size of
the array; now, it returns the size of the pointer instead.
As a result, the aforementioned sprintf statement uses the wrong size
and truncates the vdev file path to the first 4 or 8 bytes (depending
on the architecture). Typically, with default settings, the file path
will become "/tmp/zt" instead of "/test/ztest.XXX".
This issue only exists in ztest_vdev_attach_detach() and
ztest_fault_inject(), which explains why ztest doesn't fail right away.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
Currently, thread_create(), when called in userspace, creates a
joinable (i.e. not detached thread). This is the pthread default.
Unfortunately, this does not reproduce kthreads behavior (kthreads
are always detached). In addition, this contradicts the original
Solaris code which creates userspace threads in detached mode.
These joinable threads are never joined, which leads to a leakage of
pthread thread objects ("zombie threads"). This in turn results in
excessive ressource consumption, and possible ressource exhaustion in
extreme cases (e.g. long ztest runs).
This patch fixes the issue by creating userspace threads in detached
mode. The only exception is ztest worker threads which are meant to be
joinable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
The goal of this change is to make 'zpool import' prefer to use
the peristent /dev/mapper or /dev/disk/by-* paths. These are far
preferable to the devices in /dev/ whos names are not persistent
and are determined by the order in which a device is detected.
This patch improves things by changing the default search path from
just to the top level /dev/ directory to (in order):
/dev/disk/by-vdev - Custom rules, use first if they exist
/dev/disk/zpool - Custom rules, use first if they exist
/dev/mapper - Use multipath devices before components
/dev/disk/by-uuid - Single unique entry and persistent
/dev/disk/by-id - May be multiple entries and persistent
/dev/disk/by-path - Encodes physical location and persistent
/dev/disk/by-label - Custom persistent labels
/dev - UNSAFE device names will change
The default search path can be overriden by setting the
ZPOOL_IMPORT_PATH environment variable. This must be a colon
delimited list of paths which are searched for vdevs. If the
'zpool import -d' option is specified only those listed paths
will be searched.
Finally, when multiple paths to the same device are found. If one
of the paths is an exact match for the path used last time to import
the pool it will be used. When there are no exact matches the
prefered path will be determined by the provided search order.
This means you can still import a pool and force specific names by
providing the -d <path> option. And the prefered names will persist
as long as those paths exist on your system.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#965
Without this fix the zdb printouts of ZIL data blocks look full of FF
due to printf() handling its arguments as int by default.
Here is the output before the fix
TX_WRITE len 4136, txg 1093817, seq 149231
foid 4242, offset 0, length f68
G FFFFFF8EFFFFFF87FFFFFF91FFFFFFCC 1c
FFFFFFAFFFFFFFC9FFFFFFBAZ FFFFFFC3
And the same after the fix
TX_WRITE len 4136, txg 1093817, seq 149231
foid 4242, offset 0, length f68
G 8E8791CC 1cAFC9BAZ C3
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#962
ztest outputs a message when testing sync=always no matter what the
verbosity level is. There is no point outputting this message for low
verbosity levels.
With this patch the message is only displayed at verbosity level 5 or
above. The result is less output pollution.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#951
Commit e6f290535c added libzpool to
the mount_zfs dependencies. This brought in the nvpair symbols
which are used by libzpool. To resolve this include the libnvpair
library for mount_zfs even though mount_zfs doesn't directly
require any of these symbols.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#926
mount_zfs depends on libzpool for zfs_prop_written since
330d06f90d. Unfortunately, the Makefile
for mount_zfs has not been modified to reflect this. As a result,
libtool doesn't know about the dependency, which may result in the wrong
libzpool being used during the build (e.g. the libzpool from the system
instead of the libzpool from the build directory).
This patch adds the dependency to fix the issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes#909.
Remove all of the generated autotools products from the repository
and update the .gitignore files accordingly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#718
1796 "ZFS HOLD" should not be used when doing "ZFS SEND" from a read-only pool
2871 support for __ZFS_POOL_RESTRICT used by ZFS test suite
2903 zfs destroy -d does not work
2957 zfs destroy -R/r sometimes fails when removing defer-destroyed snapshot
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>
References:
https://www.illumos.org/issues/1796https://www.illumos.org/issues/2871https://www.illumos.org/issues/2903https://www.illumos.org/issues/2957
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <George.Wilson@delphix.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/2635
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#717
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/1693
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#678
Currently, zvols have a discard granularity set to 0, which suggests to
the upper layer that discard requests of arbirarily small size and
alignment can be made efficiently.
In practice however, ZFS does not handle unaligned discard requests
efficiently: indeed, it is unable to free a part of a block. It will
write zeros to the specified range instead, which is both useless and
inefficient (see dnode_free_range).
With this patch, zvol block devices expose volblocksize as their discard
granularity, so the upper layer is aware that it's not supposed to send
discard requests smaller than volblocksize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#862
1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by
destroying multiple snapshots
1708 adjust size of zpool history data
References:
https://www.illumos.org/issues/1644https://www.illumos.org/issues/1645https://www.illumos.org/issues/1646https://www.illumos.org/issues/1647https://www.illumos.org/issues/1708
This commit modifies the user to kernel space ioctl ABI. Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated. This change has reordered
all of the new ioctl()s to the end of the list. This should
help minimize this issue in the future.
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Albert Lee <trisk@opensolaris.org>
Approved by: Garrett D'Amore <garret@nexenta.com>
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#826Closes#664
This is done for compatibility with existing Linux infrastructure.
In particular, when using zfs as a root filesystem there are init
scripts which as part of shutdown remount root read-only. Also,
the new systemd infrastructure being used by Fedora expects to be
able to remount a file system read-write.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #847
The end_writeback() function was changed by moving the call to
inode_sync_wait() earlier in to evict(). This effecitvely changes
the ordering of the sync but it does not impact the details of
the zfs implementation.
However, as part of this change end_writeback() was renamed to
clear_inode() to reflect the new semantics. This change does
impact us and clear_inode() now maps to end_writeback() for
kernels prior to 3.5.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#784
The vmtruncate_range() support has been removed from the kernel in
favor of using the fallocate method in the file_operations table.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
The export_operations member ->encode_fh() has been updated to
take both the child and parent inodes. This interface used to
take the child dentry and a bool describing if the parent is needed.
NOTE: While updating this code I noticed that we do not currently
cleanly handle the case where we're passed a connectable parent.
This code should be audited to make sure we're doing the right thing.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
Currently, zpool online -e (dynamic vdev expansion) doesn't work on
whole disks because we're invoking ioctl(BLKRRPART) from userspace
while ZFS still has a partition open on the disk, which results in
EBUSY.
This patch moves the BLKRRPART invocation from the zpool utility to the
module. Specifically, this is done just before opening the device in
vdev_disk_open() which is called inside vdev_reopen(). This requires
jumping through some hoops to get to the disk device from the partition
device, and to make sure we can still open the partition after the
BLKRRPART call.
Note that this new code path is triggered on dynamic vdev expansion
only; other actions, like creating a new pool, are unchanged and still
call BLKRRPART from userspace.
This change also depends on API changes which are available in 2.6.37
and latter kernels. The build system has been updated to detect this,
but there is no compatibility mode for older kernels. This means that
online expansion will NOT be available in older kernels. However, it
will still be possible to expand the vdev offline.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#808
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/1748
This commit modifies the user to kernel space ioctl ABI. Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated. If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#665
FreeBSD #xxx: Dramatically optimize listing snapshots when user
requests only snapshot names and wants to sort them by name, ie.
when executes:
# zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot
properties.
Below you can find how long does it take to list 34509 snapshots
from a single disk pool before and after this change with cold and
warm cache:
before:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
NOTE: This patch only appears in FreeBSD. If/when Illumos picks up
the change we may want to drop this patch and adopt their version.
However, for now this addresses a real issue.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #450
This is not a proper fix. It is just a workaround for the stack
smashing detected by gcc in zvol_id. We simply disable the gcc
stack protector for now when building the zvol_id udev helper.
Once the root cause is resolved this patch should be reverted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issues #569
When compiling ZFS with CFLAGS=-O0 it will trigger the following error.
Resolve the issue by properly including locale.h.
../../cmd/mount_zfs/mount_zfs.c: In function 'main':
../../cmd/mount_zfs/mount_zfs.c:318:2: warning: implicit declaration
of function 'setlocale' [-Wimplicit-function-declaration]
../../cmd/mount_zfs/mount_zfs.c:318:19: error: 'LC_ALL' undeclared
(first use in this function)
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#724
torvalds/linux@adc0e91ab1 introduced
introduced d_make_root() as a replacement for d_alloc_root(). Further
commits appear to have removed d_alloc_root() from the Linux source
tree. This causes the following failure:
error: implicit declaration of function 'd_alloc_root'
[-Werror=implicit-function-declaration]
To correct this we update the code to use the current d_make_root()
interface for readability. Then we introduce an autotools check
to determine if d_make_root() is available. If it isn't then we
define some compatibility logic which used the older d_alloc_root()
interface.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#776
vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path
in a storage topology to a channel name. The channel name is combined
with a disk enclosure slot number to create an alias that reflects the
physical location of the drive. This is particularly helpful when it
comes to tasks like replacing failed drives. Slot numbers may also be
re-mapped in case the default numbering is unsatisfactory. The drive
aliases will be created as symbolic links in /dev/disk/by-vdev.
The only currently supported topologies are sas_direct and sas_switch:
o sas_direct - a channel is uniquely identified by a PCI slot and a
HBA port
o sas_switch - a channel is uniquely identified by a SAS switch port
A multipath mode is supported in which dm-mpath devices are handled by
examining the first running component disk, as reported by 'multipath
-l'. In multipath mode the configuration file should contain a
channel definition with the same name for each path to a given
enclosure.
vdev_id can replace the existing zpool_id script on systems where the
storage topology conforms to sas_direct or sas_switch. The script
could be extended to support other topologies as well. The advantage
of vdev_id is that it is driven by a single static input file that can
be shared across multiple nodes having a common storage toplogy.
zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per
node and a separate slot-mapping file. However, zpool_id provides the
flexibility of using any device names that show up in
/dev/disk/by-path, so it may still be needed on some systems.
vdev_id's functionality subsumes that of the sas_switch_id script, and
it is unlikely that anyone is using it, so sas_switch_id is removed.
Finally, /dev/disk/by-vdev is added to the list of directories that
'zpool import' will scan.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#713
The mode argument of iops->create()/mkdir()/mknod() was changed from
an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf
check was added to detect the API change and then correctly set a
zpl_umode_t typedef. There is no functional change.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#701
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Joshua M. Clulow <josh@sysmgr.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reference to Illumos issue:
https://www.illumos.org/issues/1946
Ported by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>
Refererce to Illumos issue:
https://www.illumos.org/issues/952
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#607
Add support for the `zfs list -t snap` alias which is available under
Oracle Solaris 11.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#640
For consistency, and because it's handy, add the 'zfs snap' alias which
was introduced by Oracle Solaris 11. This includes an update to the
man page to reflect all the available alias (snap, umount, and recv).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#640
A cryptic error code is printed when mounting a legacy dataset to a
non-existent mountpoint. This patch changes this behavior to print
"mount point '%s' does not exist", which is similar to the error
message printed when mounting procfs.
The single quotes were added to be consistent with the existing EBUSY
error message, which is the only difference between this error message
and the one that is printed when the same condition occurs when mounting
procfs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#633
When stdout is detected to be a tty use the number of columns
specified by the terminal. If that fails fall back to a default
80 column width. In the non-tty case allow for 999 column lines.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Caught by lint, this permission change was accidentally introduced
by commit 42cb3819f1. Restore the
correct permissions and while I'm at it add a missing whack-bang
to config/ltmain.sh.
lint: executable-not-elf-or-script: zpool_main.c zfs_main.c
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#620
Allow rigorous (and expensive) tx validation to be enabled/disabled
indepentantly from the standard zfs debugging. When enabled these
checks ensure that all txs are constructed properly and that a dbuf
is never dirtied without taking the correct tx hold.
This checking is particularly helpful when adding new dmu consumers
like Lustre. However, for established consumers such as the zpl
with no known outstanding tx construction problems this is just
overhead.
--enable-debug-dmu-tx - Enable/disable validation of each tx as
--disable-debug-dmu-tx it is constructed. By default validation
is disabled due to performance concerns.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add support for the .zfs control directory. This was accomplished
by leveraging as much of the existing ZFS infrastructure as posible
and updating it for Linux as required. The bulk of the core
functionality is now all there with the following limitations.
*) The .zfs/snapshot directory automount support requires a 2.6.37
or newer kernel. The exception is RHEL6.2 which has backported
the d_automount patches.
*) Creating/destroying/renaming snapshots with mkdir/rmdir/mv
in the .zfs/snapshot directory works as expected. However,
this functionality is only available to root until zfs
delegations are finished.
* mkdir - create a snapshot
* rmdir - destroy a snapshot
* mv - rename a snapshot
The following issues are known defeciences, but we expect them to
be addressed by future commits.
*) Add automount support for kernels older the 2.6.37. This should
be possible using follow_link() which is what Linux did before.
*) Accessing the .zfs/snapshot directory via NFS is not yet possible.
The majority of the ground work for this is complete. However,
finishing this work will require resolving some lingering
integration issues with the Linux NFS kernel server.
*) The .zfs/shares directory exists but no futher smb functionality
has yet been implemented.
Contributions-by: Rohan Puri <rohan.puri15@gmail.com>
Contributiobs-by: Andrew Barnes <barnes333@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#173
The 'zfs list' and 'zpool list' commands output the message
'no datasets/pools available' to stdout. This should go to
stderr and only the available datasets/pools should go to
stdout. Returning nothing to stdout is expected behavior
when there is nothing to list.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#581
Allow a source rpm to be rebuilt with debugging enabled. This
avoids the need to have to manually modify the spec file. By
default debugging is still largely disabled. To enable specific
debugging features use the following options with rpmbuild.
'--with debug' - Enables ASSERTs
# For example:
$ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm
Additionally, ZFS_CONFIG has been added to zfs_config.h for
packages which build against these headers. This is critical
to ensure both zfs and the dependant package are using the same
prototype and structure definitions.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When creating a new pool, make_root_vdev() calls check_in_use() to
ensure that none of the consituent disks are in use. If the disk
contains a valid vdev label it is read to retrieve the list of its
child vdevs and these are checked recursively. However, the
partitions stored in the vdev label my no longer exist, for example
if the partition table has since been altered. In any such case we
would want the pool creation to proceed, so this change removes the
check from check_slice() that returns an error if the device doesn't
exist. As an added assurance, the Solaris implementation also
returns sucess on ENOENT.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning.
It allows ZVOL clients to discard (unmap, trim) block ranges from
a ZVOL, thus optimizing disk space usage by allowing a ZVOL to
shrink instead of just grow.
We can't use zfs_space() or zfs_freesp() here, since these functions
only work on regular files, not volumes. Fortunately we can use the
low-level function dmu_free_long_range() which does exactly what we
want.
Currently the discard operation is not added to the log. That's not
a big deal since losing discard requests cannot result in data
corruption. It would however result in disk space usage higher than
it should be. Thus adding log support to zvol_discard() is probably
a good idea for a future improvement.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is
supported, since it's the only one that matches the behavior of
zfs_space(). This makes it pretty much useless in its current
form, but it's a start.
To support other flag combinations we would need to modify
zfs_space() to make it more flexible, or emulate the desired
functionality in zpl_fallocate().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #334
The Linux block device queue subsystem exposes a number of configurable
settings described in Linux block/blk-settings.c. The defaults for these
settings are tuned for hard drives, and are not optimized for ZVOLs. Proper
configuration of these options would allow upper layers (I/O scheduler) to
take better decisions about write merging and ordering.
Detailed rationale:
- max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to
handle writes of any size, so there's no reason to impose a limit. Let the
upper layer decide.
- max_segments and max_segment_size are set to unlimited. zvol_write() will
copy the requests' contents into a dbuf anyway, so the number and size of
the segments are irrelevant. Let the upper layer decide.
- physical_block_size and io_opt are set to the ZVOL's block size. This
has the potential to somewhat alleviate issue #361 for ZVOLs, by warning
the upper layers that writes smaller than the volume's block size will be
slow.
- The NONROT flag is set to indicate this isn't a rotational device.
Although the backing zpool might be composed of rotational devices, the
resulting ZVOL often doesn't exhibit the same behavior due to the COW
mechanisms used by ZFS. Setting this flag will prevent upper layers from
making useless decisions (such as reordering writes) based on incorrect
assumptions about the behavior of the ZVOL.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
zvol_write() assumes that the write request must be written to stable storage
if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed,
"sync" does *not* mean what we think it means in the context of the Linux
block layer. This is well explained in linux/fs.h:
WRITE: A normal async write. Device will be plugged.
WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down
the hint that someone will be waiting on this IO
shortly.
WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush.
WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on
non-volatile media on completion.
In other words, SYNC does not *mean* that the write must be on stable storage
on completion. It just means that someone is waiting on us to complete the
write request. Thus triggering a ZIL commit for each SYNC write request on a
ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL
users have no way to express that they actually want data to be written to
stable storage, which means the ZIL is broken for ZVOLs.
The request for stable storage is expressed by the FUA flag, so we must
commit the ZIL after the write if the FUA flag is set. In addition, we must
commit the ZIL before the write if the FLUSH flag is set.
Also, we must inform the block layer that we actually support FLUSH and FUA.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The second argument of sops->show_options() was changed from a
'struct vfsmount *' to a 'struct dentry *'. Add an autoconf check
to detect the API change and then conditionally define the expected
interface. In either case we are only interested in the zfs_sb_t.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#549
These libraries, which are an artifact of the ZoL development
process, conflict with packages that are already in distribution:
* libspl: SPL Programming Language
* libavl: AVL for Linux
* libefi: GRUB
And these libraries are potential conflicts:
* libshare: the Linux Mount Manager
* libunicode: Perl and Python
Recompose these five ZoL components into the four libraries that are
conventionally provided by Solaris and FreeBSD systems:
+ libnvpair
+ libuutil
+ libzpool
+ libzfs
This change resolves the name conflict, makes ZoL more compatible
with existing software that uses autotools to detect ZFS, and allows
pkg-zfs to better reflect the official Debian kFreeBSD packaging.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #430
Linux supports mounting over non-empty directories by default.
In Solaris this is not the case and -O option is required for
zfs mount to mount a zfs filesystem over a non-empty directory.
For compatibility, I've added support for -O option to mount
zfs filesystems over non-empty directories if the user wants
to, just like in Solaris.
I've defined MS_OVERLAY to record it in the flags variable if
the -O option is supplied. The flags variable passes through
a few functions and its checked before performing the empty
directory check in zfs_mount function. If -O is given, the
check is not performed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#473
Some implementations of `awk` incorrectly parse the \< and \> regex
symbols, so use a `while read` loop and regular globbing instead.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #259
The Linux 3.1 kernel has introduced the concept of per-filesystem
shrinkers which are directly assoicated with a super block. Prior
to this change there was one shared global shrinker.
The zfs code relied on being able to call the global shrinker when
the arc_meta_limit was exceeded. This would cause the VFS to drop
references on a fraction of the dentries in the dcache. The ARC
could then safely reclaim the memory used by these entries and
honor the arc_meta_limit. Unfortunately, when per-filesystem
shrinkers were added the old interfaces were made unavailable.
This change adds support to use the new per-filesystem shrinker
interface so we can continue to honor the arc_meta_limit. The
major benefit of the new interface is that we can now target
only the zfs filesystem for dentry and inode pruning. Thus we
can minimize any impact on the caching of other filesystems.
In the context of making this change several other important
issues related to managing the ARC were addressed, they include:
* The dnlc_reduce_cache() function which was called by the ARC
to drop dentries for the Posix layer was replaced with a generic
zfs_prune_t callback. The ZPL layer now registers a callback to
drop these dentries removing a layering violation which dates
back to the Solaris code. This callback can also be used by
other ARC consumers such as Lustre.
arc_add_prune_callback()
arc_remove_prune_callback()
* The arc_reduce_dnlc_percent module option has been changed to
arc_meta_prune for clarity. The dnlc functions are specific to
Solaris's VFS and have already been largely eliminated already.
The replacement tunable now represents the number of bytes the
prune callback will request when invoked.
* Less aggressively invoke the prune callback. We used to call
this whenever we exceeded the arc_meta_limit however that's not
strictly correct since it results in over zeleous reclaim of
dentries and inodes. It is now only called once the arc_meta_limit
is exceeded and every effort has been made to evict other data from
the ARC cache.
* More promptly manage exceeding the arc_meta_limit. When reading
meta data in to the cache if a buffer was unable to be recycled
notify the arc_reclaim thread to invoke the required prune.
* Added arcstat_prune kstat which is incremented when the ARC
is forced to request that a consumer prune its cache. Remember
this will only occur when the ARC has no other choice. If it
can evict buffers safely without invoking the prune callback
it will.
* This change is also expected to resolve the unexpect collapses
of the ARC cache. This would occur because when exceeded just the
arc_meta_limit reclaim presure would be excerted on the arc_c
value via arc_shrink(). This effectively shrunk the entire cache
when really we just needed to reclaim meta data.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#466Closes#292
Regenerating the autotools configuration on Debian and Ubuntu systems
causes compilation to fail with this error message:
cmd/mount_zfs/../../cmd/mount_zfs/mount_zfs.c:403:
undefined reference to `is_selinux_enabled'
In the automake template, set "mount_zfs_LDFLAGS = ... $(LIBSELINUX)"
so that the /sbin/mount.zfs utility is linked to libselinux.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit
SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170
Use the new set_nlink() kernel function instead.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #462
Added the necessary build infrastructure for building packages
compatible with the Arch Linux distribution. As such, one can now run:
$ ./configure
$ make pkg # Alternatively, one can run 'make arch' as well
on the Arch Linux machine to create two binary packages compatible with
the pacman package manager, one for the zfs userland utilities and
another for the zfs kernel modules. The new packages can then be
installed by running:
# pacman -U $package.pkg.tar.xz
In addition, source-only packages suitable for an Arch Linux chroot
environment or remote builder can also be build using the 'sarch' make
rule.
NOTE: Since the source dist tarball is created on the fly from the head
of the build tree, it's MD5 hash signature will be continually influx.
As a result, the md5sum variable was intentionally omitted from the
PKGBUILD files, and the '--skipinteg' makepkg option is used. This may
or may not have any serious security implications, as the source tarball
is not being downloaded from an outside source.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#491
The zpool_id script is posixly correct and does not use bash
features, so change its whackbang from /bin/bash to /bin/sh.
Debian policy also stipulates that system scripts be dash compatible.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Direct invocation of GNU egrep is deprecated by its man page, and the
its argument in the zpool_id script is not an extended expression.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
For consistency and safety, quote all variables in the zpool_id
script. This accomodates a `-c CONFIG` parameter value with
whitespace in the path name.
Also fix a typo in the usage synopsis for `-h`.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #439
The /lib/udev/path_id helper became a builtin command in the udev 174
release, so test whether path_id is external in the zpool_id script.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #429
Update the code to use the bdi_setup_and_register() helper to
simplify the bdi integration code. The updated code now just
registers the bdi during mount and destroys it during unmount.
The only complication is that for 2.6.32 - 2.6.33 kernels the
helper wasn't available so in these cases the zfs code must
provide it. Luckily the bdi_setup_and_register() function
is trivial.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#367
ZFS contains error messages that point to the defunct www.sun.com
domain, which is currently offline. Change these error messages
to use the zfsonlinux.org mirror instead.
This commit depends on:
zfsonlinux/zfsonlinux.github.com@8e10ead3dc
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Export all symbols already marked extern in the zfs_vfsops.h
header. Several non-static symbols have also been added to
the header and exportewd. This allows external modules to
more easily create and manipulate properly created ZFS
filesystem type datasets.
Rename zfsvfs_teardown() to zfs_sb_teardown and export it.
This is done simply for consistency with the rest of the code
base. All other zfsvfs_* functions have already been renamed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When compiling under Debian Lenny with gcc version 4.3.2
(Debian 4.3.2-1.1) the following warning occurs. To quiet
the warning initialize 'error' to zero. Newer versions of
gcc correctly determine that this uninitialized varible is
impossible because ZFS_NUM_USERQUOTA_PROPS is known to be
greater than zero.
cmd/zfs/zfs_main.c:2377: warning: "error" may be
used uninitialized in this function
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This warning was accidentally introduced by commit
b7936d5c2337bc976ac831c1c38de563844c36b. The fix is to
simply initialize the variable to ZFS_DELEG_WHO_UNKNOWN.
cmd/zfs/zfs_main.c:4460:25: warning: 'who_type' may be
used uninitialized in this function
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
These warnings were accidentally introduced by commit
b7936d5c2337bc976ac831c1c38de563844c36b. The fix is to
simply add the missing format specifier.
cmd/zfs/zfs_main.c:4565: warning: format not a string
literal and no format arguments
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Completely disable the zfs binary from attempting to directly update
/etc/mtab. The Linux port relies entirely on the mount.zfs helper
to safely update /etc/mtab. If we left the /etc/mtab updates to
the zfs binary then they could race with concurrent non-zfs mounts.
Routing everything through the system mount command ensures the
/etc/mtab updates are locked properly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #329
This change moves the default install location for the zfs udev
rules from /etc/udev/ to /lib/udev/. The correct convention is
for rules provided by a package to be installed in /lib/udev/.
The /etc/udev/ directory is reserved for custom rules or local
overrides.
Additionally, this patch cleans up some abuse of the bindir install
location by adding a udevdir and udevruledir install directories.
This allows us to revert to the default bin install location. The
udev install directories can be set with the following new options.
--with-udevdir=DIR install udev helpers [EPREFIX/lib/udev]
--with-udevruledir=DIR install udev rules [UDEVDIR/rules.d]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#356
For a long time now the kernel has been moving away from using the
pdflush daemon to write 'old' dirty pages to disk. The primary reason
for this is because the pdflush daemon is single threaded and can be
a limiting factor for performance. Since pdflush sequentially walks
the dirty inode list for each super block any delay in processing can
slow down dirty page writeback for all filesystems.
The replacement for pdflush is called bdi (backing device info). The
bdi system involves creating a per-filesystem control structure each
with its own private sets of queues to manage writeback. The advantage
is greater parallelism which improves performance and prevents a single
filesystem from slowing writeback to the others.
For a long time both systems co-existed in the kernel so it wasn't
strictly required to implement the bdi scheme. However, as of
Linux 2.6.36 kernels the pdflush functionality has been retired.
Since ZFS already bypasses the page cache for most I/O this is only
an issue for mmap(2) writes which must go through the page cache.
Even then adding this missing support for newer kernels was overlooked
because there are other mechanisms which can trigger writeback.
However, there is one critical case where not implementing the bdi
functionality can cause problems. If an application handles a page
fault it can enter the balance_dirty_pages() callpath. This will
result in the application hanging until the number of dirty pages in
the system drops below the dirty ratio.
Without a registered backing_device_info for the filesystem the
dirty pages will not get written out. Thus the application will hang.
As mentioned above this was less of an issue with older kernels because
pdflush would eventually write out the dirty pages.
This change adds a backing_device_info structure to the zfs_sb_t
which is already allocated per-super block. It is then registered
when the filesystem mounted and unregistered on unmount. It will
not be registered for mounted snapshots which are read-only. This
change will result in flush-<pool> thread being dynamically created
and destroyed per-mounted filesystem for writeback.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#174
Moving the zil_free() cleanup to zil_close() prevents this
problem from occurring in the first place. There is a very
good description of the issue and fix in Illumus #883.
Reviewed by: Matt Ahrens <Matt.Ahrens@delphix.com>
Reviewed by: Adam Leventhal <Adam.Leventhal@delphix.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Reivewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References to Illumos issue and patch:
- https://www.illumos.org/issues/883
- https://github.com/illumos/illumos-gate/commit/c9ba2a43cb
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
Today zfs tries to allocate blocks evenly across all devices.
This means when devices are imbalanced zfs will use lots of
CPU searching for space on devices which tend to be pretty
full. It should instead fail quickly on the full LUNs and
move onto devices which have more availability.
Reviewed by: Eric Schrock <Eric.Schrock@delphix.com>
Reviewed by: Matt Ahrens <Matt.Ahrens@delphix.com>
Reviewed by: Adam Leventhal <Adam.Leventhal@delphix.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>
References to Illumos issue and patch:
- https://www.illumos.org/issues/510
- https://github.com/illumos/illumos-gate/commit/5ead3ed965
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
The 'zfs get' command should be able to deal with mountpoint
as an argument. It already works with 'zfs list' command:
# zfs list /export/home/estibi
NAME USED AVAIL REFER MOUNTPOINT
rpool/export/home/estibi 1.14G 3.86G 1.14G /export/home/estibi
but it fails with 'zfs get':
# zfs get all /export/home/estibi
cannot open '/export/home/estibi': invalid dataset name
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Deano <deano@rattie.demon.co.uk>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>
References to Illumos issue and patch:
- https://www.illumos.org/issues/510
- https://github.com/illumos/illumos-gate/commit/5ead3ed965
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
Unlike most other Linux distributions archlinux installs its
init scripts in /etc/rc.d insead of /etc/init.d. This commit
provides an archlinux rc.d script for zfs and extends the
build infrastructure to ensure it get's installed in the
correct place.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#322
Unfortunately, ztest is hard coded to export the zdb utility to
be installed in a certain location. When the packaging was updated
to install zdb in /sbin/ ztest was broken. To fix this I'm updating
ztest to check both common install paths.
The zpool sub-commands like iostat, list, and status should
display consistent message when a given pool is unavailable or
no pool is present. This change unifies the default behavior
as follows:
root@prasad:~# ./zpool list 1 2
no pools available
no pools available
root@prasad:~# ./zpool iostat 1 2
no pools available
no pools available
root@prasad:~# ./zpool status 1 2
no pools available
no pools available
root@prasad:~# ./zpool list tan 1 2
cannot open 'tan': no such pool
root@prasad:~# ./zpool iostat tan 1 2
cannot open 'tan': no such pool
root@prasad:~# ./zpool status tan 1 2
cannot open 'tan': no such pool
Reported-by: Rajshree Thorat <rthorat@stec-inc.com>
Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#306
The .get_sb callback has been replaced by a .mount callback
in the file_system_type structure. When using the new
interface the caller must now use the mount_nodev() helper.
Unfortunately, the new interface no longer passes the vfsmount
down to the zfs layers. This poses a problem for the existing
implementation because we currently save this pointer in the
super block for latter use. It provides our only entry point
in to the namespace layer for manipulating certain mount options.
This needed to be done originally to allow commands like
'zfs set atime=off tank' to work properly. It also allowed me
to keep more of the original Solaris code unmodified. Under
Solaris there is a 1-to-1 mapping between a mount point and a
file system so this is a fairly natural thing to do. However,
under Linux they many be multiple entries in the namespace
which reference the same filesystem. Thus keeping a back
reference from the filesystem to the namespace is complicated.
Rather than introduce some ugly hack to get the vfsmount and
continue as before. I'm leveraging this API change to update
the ZFS code to do things in a more natural way for Linux.
This has the upside that is resolves the compatibility issue
for the long term and fixes several other minor bugs which
have been reported.
This commit updates the code to remove this vfsmount back
reference entirely. All modifications to filesystem mount
options are now passed in to the kernel via a '-o remount'.
This is the expected Linux mechanism and allows the namespace
to properly handle any options which apply to it before passing
them on to the file system itself.
Aside from fixing the compatibility issue, removing the
vfsmount has had the benefit of simplifying the code. This
change which fairly involved has turned out nicely.
Closes#246Closes#217Closes#187Closes#248Closes#231
The security_inode_init_security() function now takes an additional
qstr argument which must be passed in from the dentry if available.
Passing a NULL is safe when no qstr is available the relevant
security checks will just be skipped.
Closes#246Closes#217Closes#187
The inode eviction should unmap the pages associated with the inode.
These pages should also be flushed to disk to avoid the data loss.
Therefore, use truncate_setsize() in evict_inode() to release the
pagecache.
The API truncate_setsize() was added in 2.6.35 kernel. To ensure
compatibility with the old kernel, the patch defines its own
truncate_setsize function.
Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Closes#255
Update udev helper scripts to deal with device-mapper devices created
by multipathd. These enhancements are targeted at a particular
storage network topology under evaluation at LLNL consisting of two
SAS switches providing redundant connectivity between multiple server
nodes and disk enclosures.
The key to making these systems manageable is to create shortnames for
each disk that conveys its physical location in a drawer. In a
direct-attached topology we infer a disk's enclosure from the PCI bus
number and HBA port number in the by-path name provided by udev. In a
switched topology, however, multiple drawers are accessed via a single
HBA port. We therefore resort to assigning drawer identifiers based
on which switch port a drive's enclosure is connected to. This
information is available from sysfs.
Add options to zpool_layout to generate an /etc/zfs/zdev.conf using
symbolic links in /dev/disk/by-id of the form
<label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that
depends on the subsystem that created the link and defaults to
"dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a
unique identifier for the disk typically obtained from the scsi_id
program, and <X> and <Y> denote the switch port and disk slot numbers,
respectively.
Add a callout script sas_switch_id for use by multipathd to help
create symlinks of the form described above. Update zpool_id and the
udev zpool rules file to handle both multipath devices and
conventional drives.
Some disks with internal sectors larger than 512 bytes (e.g., 4k) can
suffer from bad write performance when ashift is not configured
correctly. This is caused by the disk not reporting its actual sector
size, but a sector size of 512 bytes. The drive may behave this way
for compatibility reasons. For example, the WDC WD20EARS disks are
known to exhibit this behavior.
When creating a zpool, ZFS takes that wrong sector size and sets the
"ashift" property accordingly (to 9: 1<<9=512), whereas it should be
set to 12 for 4k sectors (1<<12=4096).
This patch allows an adminstrator to manual specify the known correct
ashift size at 'zpool create' time. This can significantly improve
performance in certain cases. However, it will have an impact on your
total pool capacity. See the updated ashift property description
in the zpool.8 man page for additional details.
Valid values for the ashift property range from 9 to 17 (512B-128KB).
Additionally, you may set the ashift to 0 if you wish to auto-detect
the sector size based on what the disk reports, this is the default
behavior. The most common ashift values are 9 and 12.
Example:
zpool create -o ashift=12 tank raidz2 sda sdb sdc sdd
Closes#280
Original-patch-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Under Fedora 15 /etc/mtab is now a symlink to /proc/mounts by
default. When /etc/mtab is a symlink the mount.zfs helper
should not update it. There was code in place to handle this
case but it used stat() which traverses the link and then issues
the stat on /proc/mounts. We need to use lstat() to prevent the
link traversal and instead stat /etc/mtab.
Closes#270
The previous commit 8a7e1ceefa wasn't
quite right. This check applies to both the user and kernel space
build and as such we must make sure it runs regardless of what
the --with-config option is set too.
For example, if --with-config=kernel then the autoconf test does
not run and we generate build warnings when compiling the kernel
packages.
Gcc versions 4.3.2 and earlier do not support the compiler flag
-Wno-unused-but-set-variable. This can lead to build failures
on older Linux platforms such as Debian Lenny. Since this is
an optional build argument this changes add a new autoconf check
for the option. If it is supported by the installed version of
gcc then it is used otherwise it is omited.
See commit's 12c1acde76 and
79713039a2 for the reason the
-Wno-unused-but-set-variable options was originally added.
We will never bring over the pyzfs.py helper script from Solaris
to Linux. Instead the missing functionality will be directly
integrated in to the zfs commands and libraries. To avoid
confusion remove the warning about the missing pyzfs.py utility
and simply use the default internal support.
The Illumous developers are of the same mind and have proposed an
initial patch to do this which has been integrated in to the 'allow'
development branch. After some additional testing this code
can be merged in to master as the right long term solution.
The zpool_id and zpool_layout helper scripts have been updated to
use the more common /usr/bin/awk symlink. On Fedora/Redhat systems
there are both /bin/awk and /usr/bin/awk symlinks to your installed
version of awk. On Debian/Ubuntu systems only the /usr/bin/awk
symlink exists.
Additionally, add the '\<' token to the beginning of the regex
pattern to prevent partial matches. This pattern only appears to
work with gawk despite the mawk man page claiming to support this
extended regex. Thus you will need to have gawk installed to use
these optional helper scripts. A comment has been added to the
script to reflect this reality.
With the addition of the mount helper we accidentally regressed
the ability to manually mount snapshots. This commit updates
the mount helper to expect the possibility of a ZFS_TYPE_SNAPSHOT.
All snapshot will be automatically treated as 'legacy' type mounts
so they can be mounted manually.
This change fixes a kernel panic which would occur when resizing
a dataset which was not open. The objset_t stored in the
zvol_state_t will be set to NULL when the block device is closed.
To avoid this issue we pass the correct objset_t as the third arg.
The code has also been updated to correctly notify the kernel
when the block device capacity changes. For 2.6.28 and newer
kernels the capacity change will be immediately detected. For
earlier kernels the capacity change will be detected when the
device is next opened. This is a known limitation of older
kernels.
Online ext3 resize test case passes on 2.6.28+ kernels:
$ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023
$ zpool create tank /tmp/zvol
$ zfs create -V 500M tank/zd0
$ mkfs.ext3 /dev/zd0
$ mkdir /mnt/zd0
$ mount /dev/zd0 /mnt/zd0
$ df -h /mnt/zd0
$ zfs set volsize=800M tank/zd0
$ resize2fs /dev/zd0
$ df -h /mnt/zd0
Original-patch-by: Fajar A. Nugraha <github@fajar.net>
Closes#68Closes#84
Disable the gethostid() override for Solaris behavior because Linux systems
implement the POSIX standard in a way that allows a negative result.
Mask the gethostid() result to the lower four bytes, like coreutils does in
/usr/bin/hostid, to prevent junk bits or sign-extension on systems that have an
eight byte long type. This can cause a spurious hostid mismatch that prevents
zpool import on 64-bit systems.
As of gcc-4.6 the option -Wunused-but-set-variable is enabled by
default. While this is a useful warning there are numerous places
in the ZFS code when a variable is set and then only checked in an
ASSERT(). To avoid having to update every instance of this in the
code we now set -Wno-unused-but-set-variable to suppress the warning.
Additionally, when building with --enable-debug and -Werror set these
warning also become fatal. We can reevaluate the suppression of these
error at a later time if it becomes an issue. For now we are basically
just reverting to the previous gcc behavior.
When compiling ZFS in user space gcc-4.6.0 correctly identifies
the variable 'value' as being set but never used. This generates a
warning and a build failure when using --enable-debug. Once again
this is correct but I'm reluctant to remove 'value' because we are
breaking the string in to name/value pairs. While it is not used
now there's a good chance it will be soon and I'd rather not have
to reinvent this. To suppress the warning with just as a VERIFY().
This was observed under Fedora 15.
cmd/mount_zfs/mount_zfs.c: In function ‘parse_option’:
cmd/mount_zfs/mount_zfs.c:112:21: error: variable ‘value’ set but not
used [-Werror=unused-but-set-variable]
Some udev hooks are not designed to be idempotent, so calling udevadm
trigger outside of the distribution's initialization scripts can have
unexpected (and potentially dangerous) side effects. For example, the
system time may change or devices may appear multiple times. See Ubuntu
launchpad bug 320200 and this mailing list post for more details:
https://lists.ubuntu.com/archives/ubuntu-devel/2009-January/027260.html
To avoid these problems we call udevadm trigger with --action=change
--subsystem-match=block. The first argument tells udev just to refresh
devices, and make sure everything's as it should be. The second
argument limits the scope to block devices, so devices belonging to
other subsystems cannot be affected.
This doesn't fix the problem on older udev implementations that don't
provide udevadm but instead have udevtrigger as a standalone program.
In this case the above options aren't available so there's no way to
call call udevtrigger safely. But we can live with that since this
issue only exists in optional test and helper scripts, and most
zfs-on-linux users are running newer systems anyways.
This commit fixes issue on
https://github.com/behlendorf/zfs/issues/#issue/172
Changes:
- update BLKZNAME to use _IOR instead of _IO. Kernel 2.6.32 allows
read parameters (copy_to_user) with _IO, while newer kernels (tested
Archlinux's 2.6.37 kernel) enforces _IOR (which is correct)
- fix return code and message on error
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Added insert_inode_locked() helper function, prior to this most callers
used insert_inode_hash(). The older method doesn't check for collisions
in the inode_hashtable but it still acceptible for use. Fallback to
using insert_inode_hash() when insert_inode_locked() is unavailable.
Compiling with 'LDFLAGS=-Wl,--as-needed' exposed the fact that
there were some library linking problems introduced by mount_zfs.
In particular, the libzfs library does use nvpair symbols, and
mount_zfs contains no dependencies on libzpool.
Closes#161Closes#162
New versions glibc declare getcwd() with the warn_unused_result attribute.
This results in a warning because the updated mount helper was not
checking this return value. This issue was fixed by checking the return
type and in the case of an error simply returning the passed dataset.
One possible, but unlikely, error would be having your cwd directory
unlinked while the mount command was running.
cmd/mount_zfs/mount_zfs.c: In function ‘parse_dataset’:
cmd/mount_zfs/mount_zfs.c:223:2: error: ignoring return value of
‘getcwd’, declared with attribute warn_unused_result
To support automatically mounting your zfs on filesystem on boot
a basic init script is needed. Unfortunately, every distribution
has their own idea of the _right_ way to do things. Rather than
write one very complicated portable init script, which would be
invariably replaced by the distributions own anyway. I have
instead added support to provide multiple distribution specific
init scripts.
The correct init script for your distribution will be selected
by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT.
During 'make install' the correct script for your system will
be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the
usual /etc/init.d/zfs location.
Currently, there is zfs.fedora and a more generic zfs.lsb init
script. Hopefully, the distribution maintainers who know best
how they want their init scripts to function will feedback their
approved versions to be included in the project.
This change does not consider upstart jobs but I'm not at all
opposed to add that sort of thing.
When updating /etc/mtab we should be careful and strip certain
options. In particular, we need to strip 'zfsutil' because if
we don't the mount utility will helpfull provide it to the
mount helper when we issue mount(8) again. This subverts the
check that the caller is zfs(8) and not mount(8).
Allow the mount(8) utility to always operate on all datasets when
remounting them read-only. This critical for rc.sysinit/umountroot
which remounts the root filesystem read-only during shutdown to
ensure everything is correctly flushed to disk.
Fix minor typo, the check to set zfsutil should use the bitwise
'&'. I must have accidentally hit the adjacent '*' and obviously
neither the compiler or my code review caught this. Fix it now.
When run with a root '/' cwd the mount.zfs helper would strip not
only the '/' but also the next character from the dataset name.
For example, '/tank' was changed to 'ank' instead of just 'tank'.
Originally, this was done for the '/tmp' cwd case where we needed
to strip the '/' following the cwd. For example '/tmp/tank' needed
to remove the '/tmp' cwd plus 1 character for the '/'.
This change fixes the problem by checking the cwd and if it ends in
a '/' it does not strip and extra character. Otherwise it will strip
the next character. I believe this should only ever be true for the
root directory.
Closes#148
Several issues related to strange mount/umount behavior were reported
and this commit should address most of them. The original idea was
to put in place a zfs mount helper (mount.zfs). This helper is used
to enforce 'legacy' mount behavior, and perform any extra mount argument
processing (selinux, zfsutil, etc). This helper wasn't ready for the
0.6.0-rc1 release but with this change it's functional but needs to
extensively tested.
This change addresses the following open issues.
Closes#101Closes#107Closes#113Closes#115Closes#119
With the removal of the minimal xvattr support from the spl this
support needs to be replaced in the zfs package. This is fairly
easily accomplished by directly adding portions of the sys/vnode.h
header from OpenSolaris. These xvattr additions have been placed
in the sys/xvattr.h header file and included as needed where simply
a sys/vnode.h was included before.
In additon to the xvattr types and helper macros two functions
were also included. The xva_init() and xva_getxoptattr() functions
were included as static inline functions in xvattr.h. They are
simple enough and it was simpler to place them here rather than
in their own .c file.
This commit allows zvols with names longer than 32 characters, which
fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102.
Changes include:
- use /dev/zd* device names for zvol, where * is the device minor
(include/sys/fs/zfs.h, module/zfs/zvol.c).
- add BLKZNAME ioctl to get dataset name from userland
(include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id).
- add udev rule to create /dev/zvol/[dataset_name] and the legacy
/dev/[dataset_name] symlink. For partitions on zvol, it will create
/dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules,
cmd/zvol_id).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The open_bdev_exclusive() function has been replaced (again) by the
more generic blkdev_get_by_path() function. Additionally, the
counterpart function close_bdev_exclusive() has been replaced by
blkdev_put(). Because these functions are more generic versions
of the functions they replaced the compatibility macro must add
the FMODE_EXCL mask to ensure they are exclusive.
Closes#114
The new prefered inteface for evicting an inode from the inode cache
is the ->evict_inode() callback. It replaces both the ->delete_inode()
and ->clear_inode() callbacks which were previously used for this.
The fsync() callback in the file_operations structure used to take
3 arguments. The callback now only takes 2 arguments because the
dentry argument was determined to be unused by all consumers. To
handle this a compatibility prototype was added to ensure the right
prototype is used. Our implementation never used the dentry argument
either so it's just a matter of using the right prototype.
The const keyword was added to the 'struct xattr_handler' in the
generic Linux super_block structure. To handle this we define an
appropriate xattr_handler_t typedef which can be used. This was
the preferred solution because it keeps the code clean and readable.
It turns out that older versions of the glibc headers do not
properly define MS_DIRSYNC despite it being explicitly mentioned
in the man pages. They instead call it S_WRITE, so for system
where this is not correct defined map MS_DIRSYNC to S_WRITE.
At the time of this commit both Ubuntu Lucid, and Debian Squeeze
both use the out of date glibc headers.
As for MS_REC this field is also not available in the older headers.
Since there is no obvious mapping in this case we simply disable
the recursive mount option which used it.
The inclusion on dlsym(), dlopen(), and dlclose() symbols require
us to link against the dl library. Be careful to add the flag to
both the libzfs library and the commands which depend on the library.
ZFS even under Solaris does not strictly require libshare to be
available. The current implementation attempts to dlopen() the
library to access the needed symbols. If this fails libshare
support is simply disabled.
This means that on Linux we only need the most minimal libshare
implementation. In fact just enough to prevent the build from
failing. Longer term we can decide if we want to implement a
libshare library like Solaris. At best this would be an abstraction
layer between ZFS and NFS/SMB. Alternately, we can drop libshare
entirely and directly integrate ZFS with Linux's NFS/SMB.
Finally the bare bones user-libshare.m4 test was dropped. If we
do decide to implement libshare at some point it will surely be
as part of this package so the check is not needed.
By design the zfs utility is supposed to handle mounting and unmounting
a zfs filesystem. We could allow zfs to do this directly. There are
system calls available to mount/umount a filesystem. And there are
library calls available to manipulate /etc/mtab. But there are a
couple very good reasons not to take this appraoch... for now.
Instead of directly calling the system and library calls to (u)mount
the filesystem we fork and exec a (u)mount process. The principle
reason for this is to delegate the responsibility for locking and
updating /etc/mtab to (u)mount(8). This ensures maximum portability
and ensures the right locking scheme for your version of (u)mount
will be used. If we didn't do this we would have to resort to an
autoconf test to determine what locking mechanism is used.
The downside to using mount(8) instead of mount(2) is that we lose
the exact errno which was returned by the kernel. The return code
from mount(8) provides some insight in to what went wrong but it
not quite as good. For the moment this is translated as a best
guess in to a errno for the higher layers of zfs.
In the long term a shared library called libmount is under development
which provides a common API to address the locking and errno issues.
Once the standard mount utility has been updated to use this library
we can then leverage it. Until then this is the only safe solution.
http://www.kernel.org/pub/linux/utils/util-linux/libmount-docs/index.html
For the moment, the only advantage in registering a umount helper
would be to automatically unshare a zfs filesystem. Since under
Linux this would be unexpected (but nice) behavior there is no
harm in disabling it.
This is desirable because the 'zfs unmount' path invokes the system
umount. This is done to ensure correct mtab locking but has the
side effect that the umount.zfs helper would be called if it exists.
By default this helper calls back in to zfs to do the unmount on
Solaris which we don't want under Linux.
Once libmount is available and we have a safe way to correctly
lock and update the /etc/mtab file we can reconsider the need
for a umount helper. Using libmount is the prefered solution.
While not strictly required to mount a zfs filesystem using a
mount helper has certain advantages.
First, we need it if we want to honor the mount behavior as found
on Solaris. As part of the mount we need to validate that the
dataset has the legacy mount property set if we are using 'mount'
instead of 'zfs mount'.
Secondly, by using a mount helper we can automatically load the
zpl kernel module. This way you can just issue a 'mount' or
'zfs mount' and it will just work.
Finally, it gives us common hook in user space to add any zfs
specific mount options we might want. At the moment we don't
have any but now the infrastructure is at least in place.
If libselinux is detected on your system at configure time link
against it. This allows us to use a library call to detect if
selinux is enabled and if it is to pass the mount option:
"context=\"system_u:object_r:file_t:s0"
For now this is required because none of the existing selinux
policies are aware of the zfs filesystem type. Because of this
they do not properly enable xattr based labeling even though
zfs supports all of the required hooks.
Until distro's add zfs as a known xattr friendly fs type we
must use mntpoint labeling. Alternately, end users could modify
their existing selinux policy with a little guidance.
These compiler warnings were introduced when code which was
previously #ifdef'ed out by HAVE_ZPL was re-added for use
by the posix layer. All of the following changes should be
obviously correct and will cause no semantic changes.
Specifically, this fixes the two following errors in zdb when a pool
is composed of block devices:
1) 'Value too large for defined data type' when running 'zdb <dataset>'.
2) 'character device required' when running 'zdb -l <block-device>'.
Signed-off-by: Ricardo M. Correia <ricardo.correia@oracle.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Support for rolling back datasets require a functional ZPL, which we currently
do not have. The zfs command does not check for ZPL support before attempting
a rollback, and in preparation for rolling back a zvol it removes the minor
node of the device. To prevent the zvol device node from disappearing after a
failed rollback operation, this change wraps the zfs_do_rollback() function in
an #ifdef HAVE_ZPL and returns ENOSYS in the absence of a ZPL. This is
consistent with the behavior of other ZPL dependent commands such as mount.
The orginal error message observed with this bug was rather confusing:
internal error: Unknown error 524
Aborted
This was because zfs_ioc_rollback() returns ENOTSUP if we don't HAVE_ZPL, but
Linux actually has no such error code. It should instead return EOPNOTSUPP, as
that is how ENOTSUP is defined in user space. With that we would have gotten
the somewhat more helpful message
cannot rollback 'tank/fish': unsupported version
This is rather a moot point with the above changes since we will no longer make
that ioctl call without a ZPL. But, this change updates the error code just in
case.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Creating whole-disk vdevs can intermittently fail if a udev-managed symlink to
the disk partition is already in place. To avoid this, we now remove any such
symlink before partitioning the disk. This makes zpool_label_disk_wait() truly
wait for the new link to show up instead of returning if it finds an old link
still in place. Otherwise there is a window between when udev deletes and
recreates the link during which access attempts will fail with ENOENT.
Also, clean up a comment about waiting for udev to create symlinks. It no
longer needs to describe the special cases for the link names, since that is
now handled in a separate helper function.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Portability between Solaris and Linux isn't really an issue for us anymore, and
removing sections like this one helps simplify the code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This change adds two helper functions for working with vdev names and paths.
zfs_resolve_shortname() resolves a shorthand vdev name to an absolute path
of a file in /dev, /dev/disk/by-id, /dev/disk/by-label, /dev/disk/by-path,
/dev/disk/by-uuid, /dev/disk/zpool. This was previously done only in the
function is_shorthand_path(), but we need a general helper function to
implement shorthand names for additional zpool subcommands like remove.
is_shorthand_path() is accordingly updated to call the helper function.
There is a minor change in the way zfs_resolve_shortname() tests if a file
exists. is_shorthand_path() effectively used open() and stat64() to test for
file existence, since its scope includes testing if a device is a whole disk
and collecting file status information. zfs_resolve_shortname(), on the other
hand, only uses access() to test for existence and leaves it to the caller to
perform any additional file operations. This seemed like the most general and
lightweight approach, and still preserves the semantics of is_shorthand_path().
zfs_append_partition() appends a partition suffix to a device path. This
should be used to generate the name of a whole disk as it is stored in the vdev
label. The user-visible names of whole disks do not contain the partition
information, while the name in the vdev label does. The code was lifted from
the function make_disks(), which now just calls the helper function. Again,
having a helper function to do this supports general handling of shorthand
names in the user interface.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
ZFS works best when it is notified as soon as possible when a device
failure occurs. This allows it to immediately start any recovery
actions which may be needed. In theory Linux supports a flag which
can be set on bio's called FAILFAST which provides this quick
notification by disabling the retry logic in the lower scsi layers.
That's the theory at least. In practice is turns out that while the
flag exists you oddly have to set it with the BIO_RW_AHEAD flag.
And even when it's set it you may get retries in the low level
drivers decides that's the right behavior, or if you don't get the
right error codes reported to the scsi midlayer.
Unfortunately, without additional kernels patchs there's not much
which can be done to improve this. Basically, this just means that
it may take 2-3 minutes before a ZFS is notified properly that a
device has failed. This can be improved and I suspect I'll be
submitting patches upstream to handle this.
To make the 'zpool events' output simple to parse with awk the extra
newline after embedded nvlists has been dropped. This allows the
entire event to be parsed as a single whitespace seperated record.
The -H option has been added to operate in scripted mode. For the
'zpool events' command this means don't print the header. The usage
of -H is consistent with scripted mode for other zpool commands.
The string array 'char dirs[5][8]' was too small to accomodate the terminating
NUL character in "by-label". This change adds the needed additional byte.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
By default the zpool_layout command would always use the slot
number assigned by Linux when generating the zdev.conf file.
This is a reasonable default there are cases when it makes
sense to remap the slot id assigned by Linux using your own
custom mapping.
This commit adds support to zpool_layout to provide a custom
slot mapping file. The file contains in the first column the
Linux slot it and in the second column the custom slot mapping.
By passing this map file with '-m map' to zpool_config the
mapping will be applied when generating zdev.conf.
Additionally, two sample mapping have been added which reflect
different ways to map the slots in the dragon drawers.
One of the neat tricks an autoconf style project is capable of
is allow configurion/building in a directory other than the
source directory. The major advantage to this is that you can
build the project various different ways while making changes
in a single source tree.
For example, this project is designed to work on various different
Linux distributions each of which work slightly differently. This
means that changes need to verified on each of those supported
distributions perferably before the change is committed to the
public git repo.
Using nfs and custom build directories makes this much easier.
I now have a single source tree in nfs mounted on several different
systems each running a supported distribution. When I make a
change to the source base I suspect may break things I can
concurrently build from the same source on all the systems each
in their own subdirectory.
wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz
tar -xzf zfs-x.y.z.tar.gz
cd zfs-x-y-z
------------------------- run concurrently ----------------------
<ubuntu system> <fedora system> <debian system> <rhel6 system>
mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6
cd ubuntu cd fedora cd debian cd rhel6
../configure ../configure ../configure ../configure
make make make make
make check make check make check make check
This change also moves many of the include headers from individual
incude/sys directories under the modules directory in to a single
top level include directory. This has the advantage of making
the build rules cleaner and logically it makes a bit more sense.
Add the initial products from autogen.sh. These products will
be updated incrementally after this point as development occurs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Minor changes to ztest for this environment. These including
updating ztest to run in the local development tree, as well
as relocating some local variables in this function to the heap.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This topic branch contains required changes to the user space
utilities to allow them to integrate cleanly with Linux.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This topic branch contains all the changes needed to integrate the user
side zfs tools with Linux style devices. Primarily this includes fixing
up the Solaris libefi library to be Linux friendly, and integrating with
the libblkid library which is provided by e2fsprogs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This topic branch leverages the Solaris style FMA call points
in ZFS to create a user space visible event notification system
under Linux. This new system is called zevent and it unifies
all previous Solaris style ereports and sysevent notifications.
Under this Linux specific scheme when a sysevent or ereport event
occurs an nvlist describing the event is created which looks almost
exactly like a Solaris ereport. These events are queued up in the
kernel when they occur and conditionally logged to the console.
It is then up to a user space application to consume the events
and do whatever it likes with them.
To make this possible the existing /dev/zfs ABI has been extended
with two new ioctls which behave as follows.
* ZFS_IOC_EVENTS_NEXT
Get the next pending event. The kernel will keep track of the last
event consumed by the file descriptor and provide the next one if
available. If no new events are available the ioctl() will block
waiting for the next event. This ioctl may also be called in a
non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the
non-blocking case if no events are available ENOENT will be returned.
It is possible that ESHUTDOWN will be returned if the ioctl() is
called while module unloading is in progress. And finally ENOMEM
may occur if the provided nvlist buffer is not large enough to
contain the entire event.
* ZFS_IOC_EVENTS_CLEAR
Clear are events queued by the kernel. The kernel will keep a fairly
large number of recent events queued, use this ioctl to clear the
in kernel list. This will effect all user space processes consuming
events.
The zpool command has been extended to use this events ABI with the
'events' subcommand. You may run 'zpool events -v' to output a
verbose log of all recent events. This is very similar to the
Solaris 'fmdump -ev' command with the key difference being it also
includes what would be considered sysevents under Solaris. You
may also run in follow mode with the '-f' option. To clear the
in kernel event queue use the '-c' option.
$ sudo cmd/zpool/zpool events -fv
TIME CLASS
May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync
class = "ereport.fs.zfs.config.sync"
ena = 0x40982b7897700001
detector = (embedded nvlist)
version = 0x0
scheme = "zfs"
pool = 0xed976600de75dfa6
(end detector)
time = 0x4bec8bc3 0x2e5aed98
pool = "zpios"
pool_guid = 0xed976600de75dfa6
pool_context = 0x0
While the 'zpool events' command is handy for interactive debugging
it is not expected to be the primary consumer of zevents. This ABI
was primarily added to facilitate the addition of a user space
monitoring daemon. This daemon would consume all events posted by
the kernel and based on the type of event perform an action. For
most events simply forwarding them on to syslog is likely enough.
But this interface also cleanly allows for more sophisticated
actions to be taken such as generating an email for a failed drive.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add autoconf style build infrastructure to the ZFS tree. This
includes autogen.sh, configure.ac, m4 macros, some scripts/*,
and makefiles for all the core ZFS components.
While ztest does run in user space we run it with the same stack
restrictions it would have in kernel space. This ensures that any
stack related issues which would be hit in the kernel can be caught
and debugged in user space instead.
This patch is a first pass to limit the stack usage of every ztest
function to 1024 bytes. Subsequent updates can further reduce this.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is a portability change which removes the dependence of the Solaris
thread library. All locations where Solaris thread API was used before
have been replaced with equivilant Solaris kernel style thread calls.
In user space the kernel style threading API is implemented in term of
the portable pthreads library. This includes all threads, mutexs,
condition variables, reader/writer locks, and taskqs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Remove deadcode. It's possible the code should be in use
somewhere, but as the source code is laid out it currently
is not.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The upstream commit cb code had a few bugs:
1) The arguments of the list_move_tail() call in txg_dispatch_callbacks()
were reversed by mistake. This caused the commit callbacks to not be
called at all.
2) ztest had a bug in ztest_dmu_commit_callbacks() where "error" was not
initialized correctly. This seems to have caused the test to always take
the simulated error code path, which made ztest unable to detect whether
commit cbs were being called for transactions that successfuly complete.
3) ztest had another bug in ztest_dmu_commit_callbacks() where the commit
cb threshold was not being compared correctly.
4) The commit cb taskq was using 'max_ncpus * 2' as the maxalloc argument
of taskq_create(), which could have caused unnecessary delays in the txg
sync thread.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Resolve issues uncovered by -D_FORTIFY_SOURCE=2, the default redhat
macro's file adds this option to the cflags. This causes warnings
of the following type designed to keep the developer honest:
warning: ignoring return value of 'foo', declared
with attribute warn_unused_result
The short term fix is to wrap these calls in VERIFY() to check the
return code. The code was already assusing these would never fail.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix non-c90 compliant code, for the most part these changes
simply deal with where a particular variable is declared.
Under c90 it must alway be done at the very start of a block.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Richard Yao
Chris Dunlap
John M. Layman
Brian Behlendorf
Yuri Pankov
Isaac Huang
cburroughs
Patrik Greco
Ned Bass
Tim Chase
Matthew Thode
Michael Kjorling
John Wren Kennedy
renelson
Simon Guest
Maximilian Mehnert
George Wilson
Matthew Ahrens
Keith M Wesolowski
Steven Hartland
Will Andrews
Ralf Ertzinger
Steven Hartland
Turbo Fredriksson
Christer Ekholm
Dmitry Khasanov
Mike Leddy
Craig Loomis
Cyril Plisko
Madhav Suresh
Christ Schlacta
Chris Dunlop
Richard Yao
Tim Connors
Christopher Siden
Will Rouesnel
nordaux
George Wilson
Etienne Dechamps
Bill Pijewski
Richard Lowe
Etienne Dechamps
Martin Matuska
Eric Schrock
Andrew Stormont
Alexander Eremin
Dan McDonald
Matthew Ahrens
Garrett D'Amore
Pawel Jakub Dawidek
Daniel Verite
Ned A. Bass
Frederik Wessels
Mike Harsch
P.SCH
Craig Sanders
Gregor Kopka
Darik Horn
Suman Chakravartula
Prakash Surya
Kyle Fuller
Alexander Stetsenko
Shampavman
Prasad Joshi
Christian Kohlschütter
Gunnar Beutner
Manuel Amador (Rudd-O)
Fajar A. Nugraha
Ricardo M. Correia
Ricardo M. Correia