Both were removed in 4fbdb10c7b ("remove
kmem_cache module parameter KMC_EXPIRE_AGE")
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12157
* Use all caps for document title.
* Remove section name as it can be inferred from the section number.
* Name "OpenZFS" as the document source.
* Bump modification date.
While here, fixed trailing whitespace reported by igor.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10792
`KMC_KMEM` and `KMC_VMEM` are now unused since all SPL-implemented
caches are `KMC_KVMEM`.
KMC_KMEM: Given the default value of `spl_kmem_cache_kmem_limit`, we
don't use kmalloc to back the SPL caches, instead we use kvmalloc
(KMC_KVMEM). The flag, module parameter, /proc entries, and associated
code are removed.
KMC_VMEM: This flag is not used, and kvmalloc() is always preferable to
vmalloc(). The flag, /proc entries, and associated code are removed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10673
Update spl module parameters man5 with the following missing parameter
details for spl_panic_halt.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Braunegg <alex.braunegg@gmail.com>
Closes#664
There is no '.sh' macro in troff/groff/man, only '.SH' for section
headers. I assume .sp for a line break was intended here like
in the rest of the man page.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#643
To prevent holding tq_lock for too long.
Before zfsonlinux/zfs@8e71ab9, hogging delay tasks and cat /proc/spl/taskq
would easily cause a lockup. While that bug has been fixed. It's probably
still a good idea to do this just in case task lists grow too large.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#586
This patch add a module parameter spl_taskq_kick. When writing non-zero value
to it, it will scan all the taskq, if a taskq contains a task pending for more
than 5 seconds, it will be forced to spawn a new thread. This is use as an
emergency recovery from deadlock, not a general solution.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#529
The spl_kmem_cache_kmem_threads module option was accidentally
omitted from the documentation. Add it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#512
Add a new defclsyspri macro which can be used to request the default
Linux scheduler priority. Neither the minclsyspri or maxclsyspri map
to the default Linux kernel thread priority. This makes it awkward to
create taskqs which run with the same priority as the rest of the kernel
threads on the system which can lead to performance issues.
All SPL callers which previously used minclsyspri or maxclsyspri have
been changed to use defclsyspri. The vast majority of callers were
part of the test suite which won't have an external impact. The few
places where it could impact performance the change was from maxclsyspri
to defclsyspri. This makes it more likely the process will be scheduled
which may help performance.
To facilitate further performance analysis the spl_taskq_thread_priority
module option has been added. When disabled (0) all newly created kernel
threads will use the default kernel thread priority. When enabled (1)
the specified taskq priority will be used. By default this value is
enabled (1).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Setting the TASKQ_DYNAMIC flag will create a taskq with dynamic
semantics. Initially only a single worker thread will be created
to service tasks dispatched to the queue. As additional threads
are needed they will be dynamically spawned up to the max number
specified by 'nthreads'. When the threads are no longer needed,
because the taskq is empty, they will automatically terminate.
Due to the low cost of creating and destroying threads under Linux
by default new threads and spawned and terminated aggressively.
There are two modules options which can be tuned to adjust this
behavior if needed.
* spl_taskq_thread_sequential - The number of sequential tasks,
without interruption, which needed to be handled by a worker
thread before a new worker thread is spawned. Default 4.
* spl_taskq_thread_dynamic - Provides the ability to completely
disable the use of dynamic taskqs on the system. This is provided
for the purposes of debugging and troubleshooting. Default 1
(enabled).
This behavior is fundamentally consistent with the dynamic taskq
implementation found in both illumos and FreeBSD.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#458
This change is designed to improve the memory utilization of
slabs by more carefully setting their size. The way the code
currently works is problematic for slabs which contain large
objects (>1MB). This is due to slabs being unconditionally
rounded up to a power of two which may result in unused space
at the end of the slab.
The reason the existing code rounds up every slab is because it
assumes it will backed by the buddy allocator. Since the buddy
allocator can only performs power of two allocations this is
desirable because it avoids wasting any space. However, this
logic breaks down if slab is backed by vmalloc() which operates
at a page level granularity. In this case, the optimal thing to
do is calculate the minimum required slab size given certain
constraints (object size, alignment, objects/slab, etc).
Therefore, this patch reworks the spl_slab_size() function so
that it sizes KMC_KMEM slabs differently than KMC_VMEM slabs.
KMC_KMEM slabs are rounded up to the nearest power of two, and
KMC_VMEM slabs are allowed to be the minimum required size.
This change also reduces the default number of objects per slab.
This reduces how much memory a single cache object can pin, which
can result in significant memory saving for highly fragmented
caches. But depending on the workload it may result in slabs
being allocated and freed more frequently. In practice, this
has been shown to be a better default for most workloads.
Also the maximum slab size has been reduced to 4MB on 32-bit
systems. Due to the limited virtual address space it's critical
the we be as frugal as possible. A limit of 4M still lets us
reasonably comfortably allocate a limited number of 1MB objects.
Finally, the kmem:slab_small and kmem:slab_large SPLAT tests
were extended to provide better test coverage of various object
sizes and alignments. Caches are created with random parameters
and their basic functionality is verified by allocating several
slabs worth of objects.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The spl-module-parameters(5) was not kept up to date. Refresh
the man page so that it lists all the possible module options,
describes what the do, and justify why the default values are
set they way the are.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Many people have noticed that the kmem cache implementation is slow
to release its memory. This patch makes the reclaim behavior more
aggressive by immediately freeing a slab once it is empty. Unused
objects which are cached in the magazines will still prevent a slab
from being freed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This patch achieves the following goals:
1. It replaces the preprocessor kmem flag to gfp flag mapping with
proper translation logic. This eliminates the potential for
surprises that were previously possible where kmem flags were
mapped to gfp flags.
2. It maps vmem_alloc() allocations to kmem_alloc() for allocations
sized less than or equal to the newly-added spl_kmem_alloc_max
parameter. This ensures that small allocations will not contend
on a single global lock, large allocations can still be handled,
and potentially limited virtual address space will not be squandered.
This behavior is entirely different than under Illumos due to
different memory management strategies employed by the respective
kernels. However, this functionally provides the semantics required.
3. The --disable-debug-kmem, --enable-debug-kmem (default), and
--enable-debug-kmem-tracking allocators have been unified in to
a single spl_kmem_alloc_impl() allocation function. This was
done to simplify the code and make it more maintainable.
4. Improve portability by exposing an implementation of the memory
allocations functions that can be safely used in the same way
they are used on Illumos. Specifically, callers may safely
use KM_SLEEP in contexts which perform filesystem IO. This
allows us to eliminate an entire class of Linux specific changes
which were previously required to avoid deadlocking the system.
This change will be largely transparent to existing callers but there
are a few caveats:
1. Because the headers were refactored and extraneous includes removed
callers may find they need to explicitly add additional #includes.
In particular, kmem_cache.h must now be explicitly includes to
access the SPL's kmem cache implementation. This behavior is
different from Illumos but it was done to avoid always masking
the Linux slab functions when kmem.h is included.
2. Callers, like Lustre, which made assumptions about the definitions
of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated.
Other callers such as ZFS which did not will not require changes.
3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains
its original meaning of allowing allocations to access reserved
memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP.
4. The KM_NODEBUG flags has been retired and the default warning
threshold increased to 32k.
5. The kmem_virt() functions has been removed. For callers which
need to distinguish between a physical and virtual address use
is_vmalloc_addr().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Since the Linux 2.6.29 kernel all mutexes have been adaptive mutexs.
There is no longer any point in keeping this code so it is being
removed to simplify the code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The problem is described in commit aeeb4e0c0a.
However, instead of disabling the binding to CPU altogether we just keep the
last CPU index across calls to taskq_create() and thus achieve even
distribution of the taskq threads across all available CPUs.
The implementation based on assumption that task queues initialization
performed in serial manner.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Andrey Vesnovaty <andreyv@infinidat.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#336
This is a first draft of a spl-module-parameters(5) man page. I have
just extracted the parameter name and its description with modinfo,
then checked the source what type it is and its default value.
This will need more work, preferably someone that actually know these
values and what to use them for. Similar to zfsonlinux/zfs#1856, but
for the spl.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closeszfsonlinux/zfs#1856
наб
Ryan Moeller
Matthew Ahrens
abraunegg
Fabian-Gruenbichler
Chunwei Chen
Chunwei Chen
Brian Behlendorf
Andrey Vesnovaty
Turbo Fredriksson