Commit Graph

10 Commits

Author SHA1 Message Date
Will Andrews 4ed5e25074 Add Linux namespace delegation support
This allows ZFS datasets to be delegated to a user/mount namespace
Within that namespace, only the delegated datasets are visible
Works very similarly to Zones/Jailes on other ZFS OSes

As a user:
```
 $ unshare -Um
 $ zfs list
no datasets available
 $ echo $$
1234
```

As root:
```
 # zfs list
NAME                            ZONED  MOUNTPOINT
containers                      off    /containers
containers/host                 off    /containers/host
containers/host/child           off    /containers/host/child
containers/host/child/gchild    off    /containers/host/child/gchild
containers/unpriv               on     /unpriv
containers/unpriv/child         on     /unpriv/child
containers/unpriv/child/gchild  on     /unpriv/child/gchild

 # zfs zone /proc/1234/ns/user containers/unpriv
```

Back to the user namespace:
```
 $ zfs list
NAME                             USED  AVAIL     REFER  MOUNTPOINT
containers                       129M  47.8G       24K  /containers
containers/unpriv                128M  47.8G       24K  /unpriv
containers/unpriv/child          128M  47.8G      128M  /unpriv/child
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Will Andrews <will.andrews@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Buddy <https://buddy.works>
Closes #12263
2022-06-10 09:51:46 -07:00
George Amanakis 0409d33273
Improve zpool status output, list all affected datasets
Currently, determining which datasets are affected by corruption is
a manual process.

The primary difficulty in reporting the list of affected snapshots is
that since the error was initially found, the snapshot where the error
originally occurred in, may have been deleted. To solve this issue, we
add the ID of the head dataset of the original snapshot which the error
was detected in, to the stored error report. Then any time a filesystem
is deleted, the errors associated with it are deleted as well. Any time
a clone promote occurs, we modify reports associated with the original
head to refer to the new head. The stored error reports are identified
by this head ID, the birth time of the block which the error occurred
in, as well as some information about the error itself are also stored.

Once this information is stored, we can find the set of datasets
affected by an error by walking back the list of snapshots in the given
head until we find one with the appropriate birth txg, and then traverse
through the snapshots of the clone family, terminating a branch if the
block was replaced in a given snapshot. Then we report this information
back to libzfs, and to the zpool status command, where it is displayed
as follows:

 pool: test
 state: ONLINE
status: One or more devices has experienced an error resulting in data
        corruption.  Applications may be affected.
action: Restore the file in question if possible.  Otherwise restore the
        entire pool from backup.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
  scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec  3
08:27:57 2021
config:

        NAME        STATE     READ WRITE CKSUM
        test        ONLINE       0     0     0
          sdb       ONLINE       0     0 1.58K

errors: Permanent errors have been detected in the following files:

        test@1:/test.0.0
        /test/test.0.0
        /test/1clone/test.0.0

A new feature flag is introduced to mark the presence of this change, as
well as promotion and backwards compatibility logic. This is an updated
version of #9175. Rebase required fixing the tests, updating the ABI of
libzfs, updating the man pages, fixing bugs, fixing the error returns,
and updating the old on-disk error logs to the new format when
activating the feature.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain <tulsi.jain@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #9175
Closes #12812
2022-04-25 17:25:42 -07:00
Damian Szuberski 63652e1546
Add `--enable-asan` and `--enable-ubsan` switches
`configure` now accepts `--enable-asan` and `--enable-ubsan` switches
which results in passing `-fsanitize=address`
and `-fsanitize=undefined`, respectively, to the compiler. Those
flags are enabled in GitHub workflows for ZTS and zloop. Errors
reported by both instrumentations are corrected, except for:

- Memory leak reporting is (temporarily) suppressed. The cost of
  fixing them is relatively high compared to the gains.

- Checksum computing functions in `module/zcommon/zfs_fletcher*`
  have UBSan errors suppressed. It is completely impractical
  to enforce 64-byte payload alignment there due to performance
  impact.

- There's no ASan heap poisoning in `module/zstd/lib/zstd.c`. A custom
  memory allocator is used there rendering that measure
  unfeasible.

- Memory leaks detection has to be suppressed for `cmd/zvol_id`.
  `zvol_id` is run by udev with the help of `ptrace(2)`. Tracing is
  incompatible with memory leaks detection.

Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12928
2022-02-03 14:35:38 -08:00
Paul Dagnelie 795075e638
Add `const` to nvlist functions to properly expose their real behavior
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #12728
2021-12-06 18:19:13 -07:00
Dimitri John Ledkov 6c8f03232a Upgrade to libabigail 2.0.0
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Closes #12722
Closes #12739
2021-11-09 17:36:42 -08:00
George Melikov 6ea058da16 Update ABI files via new libabigail version
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12529
2021-09-02 10:02:18 -07:00
George Melikov 9776838cfb Update ABI files with generated in CI worker
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12388
2021-07-26 16:55:18 -07:00
наб 94f942c658
libspl: staticify buf and pagesize, rename aok to libspl_assert_ok
Exporting names this short can easily cause nasty collisions with user code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12050
2021-06-03 11:04:13 -06:00
наб 722b7f9a4c
libuutil: purge unused functions
Remove vestigial uu_open_tmp().  The problems with this implementation
are many, but the primary one is the TMPPATHFMT macro, which is
unused, and always has been.

Searching around for any users leads only to earlier imports of the
same, identical file, i.a. into an apple repository (which does patch
gethrtime() into it and gives us a copyright date of 2007),
and a MidnightBSD one from 2008.

Searching illumos-gate, uu_open_tmp appears, in current HEAD, three
times: in the header, libuutil's mapfile ABI, and the implementation.

This slowly grows up to eight occurrences as one moves back to the root
"OpenSolaris Launch" commit: the header, implementation, twice in
libuutil's spec ABI, twice (with multilib and non-multilib paths) in
libuutil.so's i386 and SPARC binary db ABIs.

That's 2005, and this file was abandonware even then, it's dead code.

The situation is similar for the uu_dprintf() family of functions and
uu_dump().  Nothing in accessibly recorded history has ever used them.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11873
2021-04-12 09:32:43 -07:00
Brian Behlendorf 82611cdfe5 Add ABI snapshot
Add a snapshot of the current ABI using libabigail-1.7-2.  The
included ABI passes `make checkabi` for CentOS 7, Fedora 33,
Debian 10, and Ubuntu 20.04.  This covers a fairly wide range
of glibc, gcc, and libabigail versions plus other changes which
are platform specific.

Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11144
2020-11-17 09:21:39 -08:00