The current ZVOL implementation does not explicitly set merge
options on ZVOL device queues, which results in the default merge
behavior.
Explicitly set QUEUE_FLAG_NOMERGES on ZVOL queues allowing the
ZIO pipeline to do its work.
Initial benchmarks (tiotest with no O_DIRECT) show random write
performance going up almost 3X on 8K ZVOLs, even after significant
rewrites of the logical space allocation.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: RageLtMan <rageltman@sempervictus>
Issue #5902
This commit allow higher ashift values (up to 16) in 'zpool create'
The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.
Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.
Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.
Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#2024Closes#4205Closes#4740Closes#5763
When vdev_psize increases, the location of labels 2 and 3 changes
because their location is relative to the end of the device.
The configs for labels 2 and 3 are written during the next spa_sync()
because the vdev is added to the dirty config list. However, the
uberblock rings are not re-written in their new location, leaving the
device vulnerable to the beginning of the device being overwritten or
damaged.
This patch copies the uberblock ring from label 0 to labels 2 and 3,
in their new locations, at the next sync after vdev_psize increases.
Also, add a test zpool_expand_004_pos.ksh to confirm the uberblocks
are copied.
Reviewed-by: BearBabyLiu <liu.huang@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5108
When multiple filesystems are in use, memory pressure causes arc_cache
to collapse to a minimum. Allow arc_cache to maintain proportional size
even when hit rates are disproportionate. We do this only via evictable
size from the kernel shrinker, thus it's only in effect under memory
pressure.
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#6035
Could return the wrong pages value
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Calling it when nothing is evictable will cause extra kswapd cpu. Also
if we didn't shrink it's unlikely to have memory to reap because we
likely just called it microseconds ago. The exception is if we are in
direct reclaim.
You can see how hard this is being hit in kswapd with a light test
workload:
34.95% [zfs] [k] arc_kmem_reap_now
5.40% [spl] [k] spl_kmem_cache_reap_now
3.79% [kernel] [k] _raw_spin_lock
2.86% [spl] [k] __spl_kmem_cache_generic_shrinker.isra.7
2.70% [kernel] [k] shrink_slab.part.37
1.93% [kernel] [k] isolate_lru_pages.isra.43
1.55% [kernel] [k] __wake_up_bit
1.20% [kernel] [k] super_cache_count
1.20% [kernel] [k] __radix_tree_lookup
With ZFS just mounted but only ext4/pagecache memory pressure
arc_kmem_reap_now still consumes excessive CPU:
12.69% [kernel] [k] isolate_lru_pages.isra.43
10.76% [kernel] [k] free_pcppages_bulk
7.98% [kernel] [k] drop_buffers
7.31% [kernel] [k] shrink_page_list
6.44% [zfs] [k] arc_kmem_reap_now
4.19% [kernel] [k] free_hot_cold_page
4.00% [kernel] [k] __slab_free
3.95% [kernel] [k] __isolate_lru_page
3.09% [kernel] [k] __radix_tree_lookup
Same pagecache only workload as above with this patch series:
11.58% [kernel] [k] isolate_lru_pages.isra.43
11.20% [kernel] [k] drop_buffers
9.67% [kernel] [k] free_pcppages_bulk
8.44% [kernel] [k] shrink_page_list
4.86% [kernel] [k] __isolate_lru_page
4.43% [kernel] [k] free_hot_cold_page
4.00% [kernel] [k] __slab_free
3.44% [kernel] [k] __radix_tree_lookup
(arc_kmem_reap_now has 0 samples in perf)
AKAMAI: zfs: CR 3695042
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Lock contention, by itself, shouldn't indicate a stop condition to the
kernel's slab shrinker. Doing so can cause stalls when the kernel is
trying to free large parts of the cache such as is done by drop_caches
Also, perhaps arc_reclaim_lock should be a spinlock, and this code
eliminated.
AKAMAI: zfs: CR 3593801
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Move arcstat_need_free increment from all direct calls to when
arc_reclaim_lock is busy and we exit wihout doing anything. Data will
be reclaimed in reclaim thread. The previous location meant that we
both reclaim the memory in this thread, and also schedule the same
amount of memory for reclaim in arc_reclaim, effectively doubling the
requested reclaim.
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Ensures proper accounting of bytes we requested to free
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Ghost meta/data buffers are not actually allocated
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
It doesn't need to have a loop to free page in a single scatterlist
entry because it should be single or compound page. The pages can be
freed in one invocation to __free_pages() for both cases.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Jinshan Xiong <jinshan.xiong@gmail.com>
Closes#6057
In current implementation, only zio buffers in 16KB and bigger are
guaranteed PAGESIZE alignment. This breaks Lustre since it assumes
that 'arc_buf_t::b_data' must be page aligned when zio buffers are
greater than or equal to PAGESIZE.
This patch will make the zio buffers to be PAGESIZE aligned when
the sizes are not less than PAGESIZE.
This change may cause a little bit memory waste but that should be
fine because after ABD is introduced, zio buffers are used to hold
data temporarily and live in memory for a short while.
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jinshan Xiong <jinshan.xiong@gmail.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Closes#6084
All filesystems were converted to dynamically allocated BDIs. The
destruction of backing_dev_info structures is handled as part of
super block destruction. Refactor the code to abstract away the
details of creating and destroying a BDI.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6089
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Albert Lee <trisk@forkgnu.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: bunder2015 <omfgbunder@gmail.com>
OpenZFS-issue: https://www.illumos.org/issues/7786
OpenZFS-commit: http://github.com/openzfs/openzfs/commit/db8498fCloses#6074
Commit 37f9dac removed the zvol_taskq for processing zvol requests.
This was removed as part of switching to make_request_fn and was
motivated by a concern at the time over dispatch latency.
However, this also made all bio request synchronous, and caused
serious performance issues as the bio submitter would wait for
every bio it submitted, effectively making the IO depth 1.
This patch reinstate zvol_taskq, and to make sure overlapped I/Os
are ordered properly, we take range lock in zvol_request, and pass
it along with bio to the I/O functions zvol_{write,discard,read}.
In order to facilitate benchmarks a zvol_request_sync module
option was added to switch between sync and async request handling.
For the moment, the default behavior is synchronous but this is
likely to change pending additional testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5824
OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7628 - create long versions of ZFS send / receive options
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: bunder2015 <omfgbunder@gmail.com>
Ported-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Most of 7252 was already picked up during ABD work. This
commit represents the gap from the final commit to openzfs.
- Fixed split_large_blocks check in do_dump()
- An alternate version of the write_compressible() function was
implemented for Linux which does not depend on fio. The behavior
of fio differs significantly based on the exact version.
- mkholes was replaced with truncate for Linux.
OpenZFS-issue: https://www.illumos.org/issues/7252
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5602294Closes#6067
After run a long time with QAT compression, the variable "inst_num"
is overflow by "atomic_inc_32_nv", which causes its neighbor
variable overwritten. Change its definition from U16 to U32.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#6051
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
dbuf_read() creates a zio_root() to track and wait for all the zio's
that may happen as part of this call. However, if the blkptr_t for
this buffer is NULL or a hole, we will not create any more zio's, so
this zio_root() is unnecessary. This is always the case when calling
dbuf_read() on a bonus buffer, because it has no blkptr (it's part of
the containing dnode). For workloads that read a lot of bonus buffers
(e.g. file creation and removal), creating and destroying these
unnecessary zio's can decrease performance by around 3%.
The fix is to only create/destroy the zio_root() in dbuf_read() if the
blkptr is not NULL and not a hole.
Porting Notes:
- The error handling for when dbuf_read_impl() fails which was
originally added in commit 5f6d0b6f5 has been preserved.
OpenZFS-issue: https://www.illumos.org/issues/8025
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8ec5c7cCloses#6048
Fixup commit 66aca24. We should have equivalent return
values as generic_file_llseek() and advance to end of file.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#6050Closes#6053
The existing assertions in vdev_label_read() and vdev_label_write(),
testing which config locks are held, are incorrect. The assertions
test for locks which exceed what is required for safety.
Both vdev_label_{read,write}() are changed to assert SCL_STATE is held
as RW_READER or RW_WRITER. This is safe because:
Changes to the vdev tree occur under SCL_ALL as RW_WRITER, via
spa_vdev_enter() and spa_vdev_exit().
Changes to vdev state occur under SCL_STATE_ALL as RW_WRITER, via
spa_vdev_state_enter() and spa_vdev_state_exit().
Therefore, the new assertions guarantee that the vdev cannot change
out from under a zio, and I/O to a specified leaf vdev's label is
safe.
Furthermore, this is consistent with the SPA locking discussion in
spa_misc.c, "For any zio operation that takes an explicit vdev_t
argument ... zio_read_phys(), or zio_write_phys() ... SCL_STATE as
reader suffices."
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5983
Resilver operations frequently cause only a small amount of dirty data
to be written to disk at a time, resulting in the IO scheduler to only
issue 1 write at a time to the resilvering disk. When it is rotational
media the drive will often travel past the next sector to be written
before receiving a write command from ZFS, significantly delaying the
write of the next sector.
Raise zfs_vdev_async_write_min_active so that drives are kept fed
during resilvering.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Issue #4825Closes#5926
Authored by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
sa_find_idx_tab() is declared as taking and returning "void *" parameters.
These can be declared to be the specific types.
OpenZFS-issue: https://www.illumos.org/issues/8061
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4e64affCloses#6017
Authored by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
When querying ZPL properties verify that the objset is of type
DMU_OST_ZFS.
OpenZFS-issue: https://www.illumos.org/issues/6101
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce2243aCloses#6015
Force flushing of txg's can be painfully slow when competing for disk
IO, since this is a process meant to execute asynchronously. Optimize
this path via allowing data/hole seeking if the file is clean, but if
dirty fall back to old logic. This is a compromise to disabling the
feature entirely.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#4306Closes#5962
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- grub-2.02-beta2-422-gcad5cc0 includes support for large blocks.
- Commit 8aab121 allowed GZIP[1-9].
- Grub allows pools with multiple top-level vdevs.
OpenZFS-issue: https://www.illumos.org/issues/5120
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c8811bdCloses#6007
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Enable internal log for DEBUG builds and in zfs-tests.sh.
- callbacks/zfs_dbgmsg.ksh - Dump interal log via kstat.
- callbacks/zfs_dmesg.ksh - Dump dmesg log.
- default.cfg - 'Test Suite Specific Commands' dropped.
OpenZFS-issue: https://www.illumos.org/issues/7503
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a1300Closes#6002
In zfs_ereport_post, if an event is a rate limiting
event, immediately return before any processing is done.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5998
When we try assign a new transaction to a TXG we must know beforehand
if there is sufficient free space on disk. This is to decide,
in dmu_tx_assign(), if we should reject the TX with ENOSPC.
We rely on spa_get_worst_case_asize() to inflate the size of our
logical writes by a factor of spa_asize_inflation which is
calculated as:
(VDEV_RAIDZ_MAXPARITY + 1) * SPA_DVAS_PER_BP * 2 == 24
The problem with the current implementation is that we don't take
into account what happens with very small writes on VDEVs with large
physical block sizes.
Consider the case of writes to a dataset with recordsize=512,
copies=3 on a VDEV with ashift=13 (usually SSD with 8K block size):
every logical IO will end up allocating 3 * 8K = 24K on disk, so 512
bytes multiplied by 48, which is double the size we account for.
If we allow this kind of writes to be assigned a TX it is possible,
when the pool is almost full, to trigger an allocation failure
(ENOSPC) in the ZIO pipeline, which will in turn result in the whole
pool being suspended.
The bug is fixed by using, in spa_get_worst_case_asize(), the MAX()
value chosen between the logical io size from zfs_write() and the
maximum physical block size used among our VDEVs.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5941
Authored by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Ported-by: Matt Ahrens <mahrens@delphix.com>
RAID-Z requires that space be allocated in multiples of P+1 sectors,
because this is the minimum size block that can have the required amount
of parity. Thus blocks on RAIDZ1 must be allocated in a multiple of 2
sectors; on RAIDZ2 multiple of 3; and on RAIDZ3 multiple of 4. A sector
is a unit of 2^ashift bytes, typically 512B or 4KB.
To satisfy this constraint, the allocation size is rounded up to the
proper multiple, resulting in up to 3 "pad sectors" at the end of some
blocks. The contents of these pad sectors are not used, so we do not
need to read or write these sectors. However, some storage hardware
performs much worse (around 1/2 as fast) on mostly-contiguous writes
when there are small gaps of non-overwritten data between the writes.
Therefore, ZFS creates "optional" zio's when writing RAID-Z blocks that
include pad sectors. If writing a pad sector will fill the gap between
two (required) writes, we will issue the optional zio, thus doubling
performance. The gap-filling performance improvement was introduced in
July 2009.
Writing the optional zio is done by the io aggregation code in
vdev_queue.c. The problem is that it is also subject to the limit on
the size of aggregate writes, zfs_vdev_aggregation_limit, which is by
default 128KB. For a given block, if the amount of data plus padding
written to a leaf device exceeds zfs_vdev_aggregation_limit, the
optional zio will not be written, resulting in a ~2x performance
degradation.
The problem occurs only for certain values of ashift, compressed block
size, and RAID-Z configuration (number of parity and data disks). It
cannot occur with the default recordsize=128KB. If compression is
enabled, all configurations with recordsize=1MB or larger will be
impacted to some degree.
The problem notably occurs with recordsize=1MB, compression=off, with 10
disks in a RAIDZ2 or RAIDZ3 group (with 512B or 4KB sectors). Therefore
this problem has been known as "the 1MB 10-wide RAIDZ2 (or 3) problem".
The problem also occurs with the following configurations:
With recordsize=512KB or 256KB, compression=off, the problem occurs only
in rarely-used configurations:
* 4-wide RAIDZ1 with recordsize=512KB and ashift=12 (4KB sectors)
* 4-wide RAIDZ2 (either recordsize, either ashift)
* 5-wide RAIDZ2 with recordsize=512KB (either ashift)
* 6-wide RAIDZ2 with recordsize=512KB (either ashift)
With recordsize=1MB, compression=off, ashift=9 (512B sectors)
* RAIDZ1 with 4 or 8 disks
* RAIDZ2 with 4, 8, or 10 disks
* RAIDZ3 with 6, 8, 9, or 10 disks
With recordsize=1MB, compression=off, ashift=12 (4KB sectors)
* RAIDZ1 with 7 or 8 disks
* RAIDZ2 with 4, 5, or 10 disks
* RAIDZ3 with 6, 9, or 10 disks
With recordsize=2MB and larger (which can only be selected by changing
kernel tunables), many configurations are affected, including with
higher numbers of disks (up to 18 disks with recordsize=2MB).
Increase zfs_vdev_aggregation_limit to allow the optional zio to be
aggregated, thus eliminating the problem. Setting it to 256KB fixes all
commonly-used configurations.
The solution is to aggregate optional zio's regardless of the
aggregation size limit.
Analysis sponsored by Intel Corp.
OpenZFS-issue: https://www.illumos.org/issues/8005
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/321Closes#5931
Authored by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/2932
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/810e43bCloses#5984Closes#5216
Authored by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
We don't want to dirty any data when we're in the final txgs of the pool
export logic. This change introduces checks to make sure that no data is
dirtied after a certain point. It also addresses the culprit of this
specific bug – the space map cannot be upgraded when we're in final
stages of pool export. If we encounter a space map that wants to be
upgraded in this phase, then we simply ignore the request as it will get
retried the next time we set the fragmentation metric on that metaslab.
OpenZFS-issue: https://www.illumos.org/issues/8023
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ef00f5Closes#5991
On 32-bit platforms spa_state is 32 bits without cast, and thus
caused a NULL pointer dereference when treated as 64bit in
var arg. Accidentally introduced by bcdb96a.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#5966Closes#5965
Authored by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
When a member of a RAIDZ has been replaced with a device smaller than
the original, then the top level vdev can report its expand size as
16.0E.
The reduced child asize causes the RAIDZ to have a vdev_asize lower than
its vdev_max_asize which then results in an underflow during the
calculation of the parents expand size.
Fix this by updating the vdev_asize if it shrinks, which is already
protected by a check against vdev_min_asize so should always be safe.
Also for RAIDZ vdevs, ensure that the sum of their child vdev_min_asize
is always greater than the parents vdev_min_size.
Reviewed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7885
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bb0dbaaCloses#5963
* Add ZPOOL pool state to zfs_post_common to
allow differentiation between export and destroy
by zedlets.
* Add pool name as standard export This ensures
pool name is exported to zedlets.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Closes#5942
Wherever possible it's best to avoid depending on a linear ABD.
Update the code accordingly in the following areas.
- vdev_raidz
- zio, zio_checksum
- zfs_fm
- change abd_alloc_for_io() to use abd_alloc()
Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5668
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.
Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5878
The offset arguments is wrong when changing to abd_copy_off in a6255b7
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5932Closes#5936
For historical reasons zfs_mknode() was written such that it could
never fail. This poses a problem for Linux since zfs_znode_alloc()
could potentually failure due to low memory. Handle this gracefully
by retrying zfs_znode_alloc() until it succeeds, direct reclaim
will eventually be able to allocate memory.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5535Closes#5908
This patch implement the hardware accelerator method in GZIP compression
in ZFS. When the ZFS pool is enabled GZIP compression, the compression
API will be automatically transferred to the hardware accelerator to
free up CPU resource and speed up the compression time.
* To enable Intel QAT hardware acceleration in ZOL you need to have QAT
hardware and the driver installed:
* QAT hardware DH8950:
http://ark.intel.com/products/79483/Intel-QuickAssist-Adapter-8950
* QAT driver:
https://01.org/intel-quickassist-technology
* Start QAT driver in your system:
service qat_service start
* Enable QAT in ZFS, e.g.:
./configure --with-qat=<qat-driver-path>/QAT1.6
make
* Set GZIP compression in ZFS dataset:
zfs set compression = gzip <dataset>
* Get QAT hardware statistics by:
cat /proc/spl/kstat/zfs/qat
* To disable QAT in ZFS:
insmod zfs.ko zfs_qat_disable=1
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#5846
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>
spa_sync() iterates over all the dirty dnodes and processes each of them
by calling dnode_sync(). If there are many dirty dnodes (e.g. because we
created or removed a lot of files), the single thread of spa_sync()
calling dnode_sync() can become a bottleneck. Additionally, if many
dnodes are dirtied concurrently in open context (e.g. due to concurrent
file creation), the os_lock will experience lock contention via
dnode_setdirty().
The solution is to track dirty dnodes on a multilist_t, and for
spa_sync() to use separate threads to process each of the sublists in
the multilist.
OpenZFS-issue: https://www.illumos.org/issues/7968
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4a2a54cCloses#5752
In torvalds/linux@a528d35, there are changes to the getattr family of functions,
struct kstat, and the interface of inode_operations .getattr.
The inode_operations .getattr and simple_getattr() interface changed to:
int (*getattr) (const struct path *, struct dentry *, struct kstat *,
u32 request_mask, unsigned int query_flags)
The request_mask argument indicates which field(s) the caller intends to use.
Fields the caller has not specified via request_mask may be set in the returned
struct anyway, but their values may be approximate.
The query_flags argument indicates whether the filesystem must update
the attributes from the backing store.
Currently both fields are ignored. It is possible that getattr-related
functions within zfs could be optimized based on the request_mask.
struct kstat includes new fields:
u32 result_mask; /* What fields the user got */
u64 attributes; /* See STATX_ATTR_* flags */
struct timespec btime; /* File creation time */
Fields attribute and btime are cleared; the result_mask reflects this. These
appear to be optional based on simple_getattr() and vfs_getattr() within the
kernel, which take the same approach.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5875
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
When we do a clone swap (caused by "zfs rollback" or "zfs receive"), the
ZPL doesn't completely reload the state from the DMU; some values remain
cached in the zfsvfs_t.
OpenZFS-issue: https://www.illumos.org/issues/6874
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1fdcbd0Closes#5888
Restructure the handling of mount options to be consistent with
upstream OpenZFS. This required making the following changes.
- The zfs_mntopts_t was renamed vfs_t and adjusted to provide
the minimal needed functionality. This includes a pointer
back to the associated zfsvfs_t. Plus it made it possible
to revert zfs_register_callbacks() and zfsvfs_create() back
to their original prototypes.
- A zfs_mnt_t structure was added for the sole purpose of
providing a structure to pass the osname and raw mount
pointer to zfs_domount() without having to copy them.
- Mount option parsing was moved down from the zpl_* wrapper
functions in to the zfs_* functions. This allowed for the
code to be simplied and it's where similar functionality
appears on other platforms.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Several functions were renamed when ZFS was originally ported to
Linux. Revert the code to the original names to minimize the
delta with upstream OpenZFS.
zfs_sb_teardown -> zfsvfs_teardown
zfs_sb_create -> zfsvfs_create
zfs_sb_setup -> zfsvfs_setup
zfs_sb_free -> zfsvfs_free
get_zfs_sb -> getzfsvfs
zfs_sb_hold -> zfsvfs_hold
zfs_sb_rele -> zfsvfs_rele
zfs_sb_prune_aliases -> zfs_prune_aliases (Linux-only)
zfs_sb_prune -> zfs_prune (Linux only)
Align the zfs_vnops.h and zfs_vfsops.h with upstream as much
as possible. Several prototypes were removed and those that
remain were reordered.
Move the EXPORT_SYMBOL lines to the end of the source files
for consistency with the other source files.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The use of zfs_sb_t instead of zfsvfs_t results in unnecessary
conflicts with the upstream source. Change all instances of
zfs_sb_t to zfsvfs_t including updating the variables names.
Whenever possible the code was updated to be consistent with
hope it appears in the upstream OpenZFS source.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The BLKFLSBUF ioctl is expected to do two things:
- flush dirty pages to stable storage, and
- invalidate clean pages
Unfortunately, the existing implementation of BLKFLSBUF in
zvol_ioctl() only flushes pages which are part of the current
TXG to disk. There may be additional dirty pages in the
page cache which haven't yet been submitted to the DMU and
therefore aren't part of any TXG.
Furthermore because zvol_ioctl() returns 0 the generic
blkdev_flushbuf() does not invalidate the page cache.
Resolve the issue by moving bdev_flush() in to zvol_ioctl()
and explicitly waiting for a full TXG sync. Then invalidate
the page cache. The associated ARC buffers need not be
evicted since they cannot be bypassed using O_DIRECT.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5871Closes#5879
Newer versions of cppcheck find the potential NULL pointer
bug in zfs_write(). The function is difficult to refactor without
extensive work, so suppress the potential NULL pointer error
which cannot occur for now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5882
The current implementation for allowing nfs to access snapdir is very buggy.
It uses a special fh for snapdirs, such that the next time nfsd does
fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd
never knows it cross a mountpoint.
The problem is that nfsd will not hold a reference on the vfsmount of the
snapshot. This cause auto unmounter to unmount the snapshot even though nfs is
still holding dentries in it.
To fix this, we return the inode for the snapdirs themselves. However, we also
trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate
and see the mountpoint and do crossmnt.
Because nfsd will now be aware that these are different filesystems users
must add crossmnt to their export options to access snapshot directories.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3794Closes#4716Closes#5810Closes#5833
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7867
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aa1f740dCloses#5874
Properly annotate functions and data section so that objtool does not complain
when CONFIG_STACK_VALIDATION and CONFIG_FRAME_POINTER are enabled.
Pass KERNELCPPFLAGS to assembler.
Use kfpu_begin()/kfpu_end() to protect SIMD regions in Linux kernel.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5872Closes#5041
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
logic attempted to predict what will be on disk when this txg syncs, to
know if the overwritten block will be freed (i.e. exists, and has no
snapshots).
OpenZFS-issue: https://www.illumos.org/issues/7793
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a
Upstream bugs: DLPX-32883a
Closes#5804
Porting notes:
- DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(),
Using the default dnode size would be slightly better.
- DEBUG_DMU_TX wrappers and configure option removed.
- Resolved _by_dnode() conflicts these changes have not yet been
applied to OpenZFS.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7843
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4d519e7Closes#5868
Commit 933ec99 removes read and write from f_op because the vfs layer will
select iter_write or aio_write automatically. However, for Linux <= 4.0,
loop_set_fd will actually check f_op->write and set read-only if not exists.
This patch add them back and use the generic do_sync_{read,write} for
aio_{read,write} and new_sync_{read,write} for {read,write}_iter.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5776Closes#5855
Linux 4.11 introduces a new type, refcount_t, which conflicts with the
type of the same name defined within ZFS.
Rename the ZFS type zfs_refcount_t. Within the ZFS code, use a macro to
cause references to refcount_t to be changed to zfs_refcount_t at
compile time. This reduces conflicts when later landing OpenZFS
patches.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5823Closes#5842
0eef1bde31
introduced some changes which we slightly improved the style of when
porting to illumos.
There is also one minor error-handling fix, in zap_add() the "zap" may
become NULL in case of an error re-opening the ZAP.
Originally suggested at: https://github.com/openzfs/openzfs/pull/276
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5805
The commit a6255b7fce removed a few
assertions which help catch errors and improve code readability. It also
duplicated two conditionals, which was unnecessary and made the code
confusing to read. This patch cleans it up.
Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5802
Authored by: Daniel Hoffman <dj.hoffman@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
This change removes all gendered language that did not refer specifically
to an individual person or pet. The convention taken was to use
variations on "they" when referring to users and/or human beings, while
using "it" when referring to code, functions, and/or libraries.
Additionally, we took the liberty to fix up any whitespace issues that
were found in any files that were already being modified.
OpenZFS-issue: https://www.illumos.org/issues/7812
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ad626dbCloses#5822
7200 no blocks must be born in a txg after a snaphot is created
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7199
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bfaed0bCloses#5817
After a hot spare replaces an OFFLINE vdev, the new
parent spare vdev state is set incorrectly to OFFLINE.
The correct state should be DEGRADED. The incorrect
OFFLINE state will prevent top-level vdev from reading
the spare vdev, thus causing unnecessary reconstruction.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5766Closes#5770
The global tunable zfs_arc_num_sublists_per_state is used by the ARC and
the dbuf cache, and other users are planned. We should change this
tunable to be common to all multilists. This tuning may be overridden
on a per-multilist basis.
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5764
A likely cut/paste error caused the description to be applied to
zfs_arc_average_blocksize.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5788
Doing the following command would return success with zfs creating an orphan
object.
touch $(for i in $(seq 256); do printf "n"; done)
The funny thing is that this will only work once for each directory, because
after upgraded to fzap, zfs_lookup would fail properly since it has additional
length check.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5768
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7104
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4b5c8e9Closes#5679
This is a race condition in the deadlist code.
A thread executing an administrative command that uses
dsl_deadlist_space_range() holds the lock of the whole deadlist_t to
protect the access of all its entries that the deadlist contains in an
avl tree.
Sync threads trying to insert a new entry in the deadlist (through
dsl_deadlist_insert() -> dle_enqueue()) do not hold the deadlist lock at
that moment. If the dle_bpobj is the empty bpobj (our sentinel value),
we close and reopen it. Between these two operations, it is possible
for the dsl_deadlist_space_range() thread to dereference that bpobj
which is NULL during that window.
Threads should hold the a deadlist's dl_lock when they manipulate its
internal data so scenarios like the one above are avoided.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5762
As explicitly stated in section 2 of the 'Programming rules'
comments at the top of zfs_vnops.c.
If you must call iput() within a tx then use zfs_iput_async().
Move iput() calls after dmu_tx_commit() / dmu_tx_abort when
possible. When not possible convert the iput() calls to
zfs_iput_async().
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5758
Add the appropriate compiler flags to accept c99 code. This will help to
minimize differences with upstream, and aid porting changes. One change was
necessary in zvol.c because the DEFINE_IDA() macro does not work with the new
compiler flags.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5756
When the code was added this tunable was not exposed via module params. Also it
was not documented. This patch changes the type from a uint32 to a ulong as
done with other percentage tunables and also documents it in the
zfs-module-parameters man page.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes#5750
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Dan Fields <dan.fields@nexenta.com>
Reviewed by: Alek Pinchuk <alek.pinchuk@nexenta.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7448
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/295438bCloses#5737
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7247
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ad25b4Closes#5689
Porting notes:
- tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh
renamed as zfs_receive_015_pos.ksh, zfs_receive_013_pos.ksh is now
used for OpenZFS test.
- libzfs_sendrecv.c: SMALLEST_POSSIBLE_MAX_DDT_MB is always used
for all 32-bit builds.
For generic_write_checks with 2 args, we can exit when it returns zero because
it means count is zero. However this is not the case for generic_write_checks
with 4 args, where zero means no error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5720Closes#5726
This is effectively dead code for the Linux implementation which can
be removed to improve readability. We want to linter to check the
real production/debug build as much as possible.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5722
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7072
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c39a2aaCloses#5694
Porting notes:
- vdev.c: 'vdev_get_stats' changes are moved to 'vdev_get_stats_ex'.
- vdev_disk.c: ignored, Linux specific code is different.
This patch adds the necessary infrastructure for ABD to make use
of the vectorized fletcher 4 routines.
- export ABD compatible interface from fletcher_4
- add ABD fletcher_4 tests for data and metadata ABD types.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes#5589
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes: Moved reference_tracking_enable and
reference_history outside of ZFS_DEBUG.
OpenZFS-issue: https://www.illumos.org/issues/7545
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4dd77f9Closes#5701
The deadman in ZoL didn't behave quite as it did in upstream
OpenZFS. In addition to the 2 purposes for which OpenZFS used the
zfs_deadman_synctime_ms parameter, ZoL also used it to determine how
frequently the deadman would fire once it has been triggered.
This patch adds the zfs_deadman_checktime_ms parameter to control how
frequently the subsequent checks are performed.
The deadman is now disabled for suspended pools.
As had been the case, unlike upstream OpenZFS, ZoL will not panic when
a hung IO is detected.
The module parameter documentation has been upated to include the new
parameter and to better describe the operation of the deadmen.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5695
Authored by: Alex Wilson <alex.wilson@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7019
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45b1747Closes#5709
Authored by: Alan Somers <asomers@gmail.com>
7115 6922 generates ESC_ZFS_VDEV_REMOVE_AUX a bit too often
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7136
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b72b6bbCloses#5691
Porting notes:
- Functionally this patch behaves the same as the OpenZFS
version but it was adapted because because ZoL doesn't
have the same illumos sysevent_t infrastructure and functionality.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7490
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6cedfc3Closes#5693
Authored by: Alan Somers <asomers@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6922
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/63364b0Closes#5690
Porting notes:
- 'zfs_dbgmsg_print()' reintroduced to userspace.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7277
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bdd2fCloses#5684
After resuming a pool the godfather zio could have both the
ZIO_REEXECUTE_NOW and ZIO_REEXECUTE_SUSPEND bits set. This
can occur if some child zios set ZIO_REEXECUTE_NOW while
other set ZIO_REEXECUTE_SUSPEND. The godfather zio can
inherit both flags in zio_notify_parent().
The child zios which assigned the ZIO_REEXECUTE_SUSPEND flag
will be removed from the godfather's child list and added to
the spa->spa_suspend_zio_root child list. While child zios
with the ZIO_REEXECUTE_NOW bit set remain being monitored
by the godfather zio.
When the godfather zio executes zio_done() the presence of
the ZIO_REEXECUTE_SUSPEND bit results in all io_reexecute
being cleared. These child zios will then not be re-executed
and instead will be destroyed and lost.
The most straight forward way to address this situation is
to only clear the ZIO_REEXECUTE_SUSPEND bit and leave the
ZIO_REEXECUTE_NOW bit set.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7580
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3105d95Closes#5678
The .write/.read file operations callbacks can be retired since
support for .read_iter/.write_iter and .aio_read/.aio_write has
been added. The vfs_write()/vfs_read() entry functions will
select the correct interface for the kernel. This is desirable
because all VFS write/read operations now rely on common code.
This change also add the generic write checks to make sure that
ulimits are enforced correctly on write.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5587Closes#5673
metaslab_t:ms_freetree[TXG_SIZE] is only used in syncing context. We
should replace it with two trees: the freeing tree (ranges that we are
freeing this syncing txg) and the freed tree (ranges which have been
freed this txg).
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/7613
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a8698da2Closes#5598
Authored by: Stephen Blinick <stephen.blinick@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7500
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/653af1bCloses#5639
When importing a pool with a large number of filesystems within the same
parent filesystem, we see that dmu_objset_find_dp() takes a long time.
It is called from 3 places: spa_check_logs(), spa_ld_claim_log_blocks(),
and spa_load_verify().
There are several ways to improve performance here:
1. We don't really need to do spa_check_logs() or
spa_ld_claim_log_blocks() if the pool was closed cleanly.
2. spa_load_verify() uses dmu_objset_find_dp() to check that no
datasets have too long of names.
3. dmu_objset_find_dp() is slow because it's doing
zap_value_search() (which is O(N sibling datasets)) to determine
the name of each dsl_dir when it's opened. In this case we
actually know the name when we are opening it, so we can provide
it and avoid the lookup.
This change implements fix#3 from the above list; i.e. make
dmu_objset_find_dp() provide the name of the dataset so that we don't
have to search for it.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <prashksp@gmail.com>
Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7606
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cac6babCloses#5662
When doing recv and rollback, dsl_dataset_clone_swap_sync_impl will be
called to swap out the ds_objset and do dmu_objset_evict on the old one.
However, currently zv->zv_objset will not be swapped out accordingly, so
if anyone currently holds a fd on the zvol, we risk hitting a use-after-free.
We fix this by introducing the suspend and resume mechanism of zsb to
zv. Before recv or rollback, we use zvol_suspend to block all access to
zv_objset and shut it down. After the recv or rollback, we use zvol_resume
to swap in zv_objset with the new ds_objset and unblock the access.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#4866Closes#5609
Porting notes:
- This issue was first fixed in ZoL by commit d862cb0d. That fix was
then modified and an equivalent version of the patch landed in the
upstream code base. For additional details see the discussion in
https://github.com/openzfs/openzfs/pull/24 .
This commit aligns ZoL with OpenZFS codebase.
Authored by: Andriy Gapon <avg@icyb.net.ua>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: George Melikov mail@gmelikov.ru
OpenZFS-issue: https://www.illumos.org/issues/6529
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e7e978bCloses#5606
Two threads send_traverse_thread() and receive_writer_thread() should
end with thread_exit();
Mostly a cosmetic issue under IllumOS.
Authored by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7659
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a569268Closes#5603
Authored by: Igor Kozhukhov ikozhukhov@gmail.com
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7071
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/25f7d99Closes#5597
Authored by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7082
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/10e67aaCloses#5596
Fix dmu_object_next() to correctly handle unallocated objects on
large_dnode datasets.
We implement this by scanning the dnode block until we find the correct
offset to be used in dnode_next_offset(). This is necessary because we
can't assume *objectp is a hole even if dmu_object_info() returns
ENOENT.
This fixes a couple of issues with zfs receive on large_dnode datasets.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5027Closes#5532
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7181
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90f2c09Closes#5585
Assuming /bin/cp causes problems on systems where cp is
not in /bin such as NixOS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Closes#5548
Add *_by_dnode() routines for accessing objects given their
dnode_t *, this is more efficient than accessing the object by
(objset_t *, uint64_t object). This change converts some but
not all of the existing consumers. As performance-sensitive
code paths are discovered they should be converted to use
these routines.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Closes#5534
Issue #4802
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Joe Stein <jas14@cs.brown.edu>
Ported-by: Don Brady <don.brady@intel.com>
When loading a pool that had been created before the existance of
per-vdev zaps, on a system that knows about per-vdev zaps, the
per-vdev zaps will not be allocated and initialized.
This appears to be because the logic that would have done so, in
spa_sync_config_object(), is not reached under normal operation. It is
only reached if spa_config_dirty_list is non-empty.
The fix is to add another `AVZ_ACTION_` enum that will allow this code
to be reached when we detect that we're loading an old pool, even when
there are no dirty configs.
OpenZFS-issue: https://www.illumos.org/issues/7743
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e2d29d0Closes#5582
This change introduces a new weighting algorithm to improve
metaslab selection. The new weighting algorithm relies on the
SPACEMAP_HISTOGRAM feature. As a result, the metaslab weight
now encodes the type of weighting algorithm used (size-based
vs segment-based).
Porting Notes: The metaslab allocation tracing code is conditionally
removed on linux (dependent on mdb debugger).
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov pavel.zakharov@delphix.com
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Don Brady <don.brady@intel.com>
OpenZFS-issue: https://www.illumos.org/issues/7303
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d5190931bdCloses#5404
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5547Closes#5543
[bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API"
autotools checks to use an int to determine whether the various REQ_OP
values are defined. This should work properly on kernels >= 4.8.
[bio] bio_set_op_attrs() is now an inline function and can't be detected
with #ifdef. Add a configure check to determine whether bio_set_op_attrs()
is defined. Move the local definition of it from vdev_disk.c to
blkdev_compat.h for consistency with other related compability shims.
[bio] The read/write flags and their modifiers, including WRITE_FLUSH,
WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new
bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA
and set the flags appropriately for each supported kernel version.
[vfs] The generic_readlink() function has been made static. If .readlink
in inode_operations is NULL, generic_readlink() is used.
[zol typo] Completely unrelated to 4.10 compat, fix a typo in the check
for REQ_OP_SECURE_ERASE so that the proper macro is defined:
s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5499
Fix a regression accidentally introduced by e0ab3ab.
Additionally, add a new script zpool_import_014_pos.ksh to
the ZFS test suite to exercise 'zpool import -t' functionality.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5466Closes#5515
The introduction of parallel zvol prefetch causes deadlock when using
vdev_file.
spa_async->(spa_namespace_lock)->txg_wait_synced->(wait for txg_sync)
txg_sync->zio_wait->(wait for vdev_file_io_fsync on system_taskq)
zvol_prefetch_minors_impl (on system_taskq)->spa_open_common->(wait for spa_namespace_lock)
We fix this by using dedicated taskq for vdev_file. This same change
was originally made in commit bc25c93 but reverted in commit aa9af22
when dynamic taskqs were added.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#5506Closes#5495
When iterating over the input nvlist in dsl_props_set_sync_impl() when we don't
preserve the nvpair name before looking up ZPROP_VALUE, so when we later go to
process it nvpair_name() is always "value" and not the actual property name.
This fixes a couple of bugs in zfs_ioc_recv():
* Received properties were not restored correctly when failing to receive an
incremental send stream
* Received properties were not completely replaced by the new ones when
successfully receiving an incremental send stream
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5497
This branch contains the following fixes/improvements.
* Fix setting i_flags
* Fix wrong operator in xvattr.h
* Fix fchange macro in zpl_ioctl_setflags()
* Added configure check to use inode_set_flags()
* Added a test case for chattr for better test coverage
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5486Closes#5470Closes#5469
zfs_sb_create would normally takes ownership of zmo, and it will be freed in
zfs_sb_free. However, when zfs_sb_create fails we need to explicit free it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5490Closes#5496
The fchange in zpl_ioctl_setflags was for detecting flag change. However it
was incorrect and would always fail to detect a flag change from set to unset,
causing users without CAP_LINUX_IMMUTABLE to be able to unset flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Adapt avx512bw implementation for use with abd buffers. Mul2 implementation
is rewritten to take advantage of the BW instruction set.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Romain Dolbeau <romain.dolbeau@atos.net>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5477
Fix zfs_xvattr_set to set S_IMMUTABLE and S_APPEND flags correctly.
Reinstate zfs_set_inode_flags and use it when zfs_xvatter_set and also when
setting up inode in zfs_znode_alloc and zfs_rezget.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
User of ida needs to call ida_destroy after using it. Otherwise
ida->free_bitmap and/or other stuff may leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5484
This removes two large whitespaces in "modinfo zfs" as well as correcting
a couple typos.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes#5475
Enable picky cstyle checks and resolve the new warnings. The vast
majority of the changes needed were to handle minor issues with
whitespace formatting. This patch contains no functional changes.
Non-whitespace changes are as follows:
* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5465
Don't count '@' for dataset namelen if not a snapshot. This
fixes making a pool unimportable when the dataset namelen
is 255.
Add test file for zfs create name length 255.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5432Closes#5456
CID 154617: Memory - illegal accesses (UNINIT)
The value here just needs to be initialized to make Coverity happy.
When dsize == 0, then value of daiter.iter_mapaddr is irrelevant. That
address won't be accessed, it's only used for some arithmetic. dsize
can be zero either if dabd is null, or if code column is longer than the
current data column.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5437
Speed up import and export speed by:
* Add system delay taskq
* Parallel prefetch zvol dnodes during zvol_create_minors
* Parallel zvol_free during zvol_remove_minors
* Reduce list linear search using ida and hash
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5433
Enable zio_dva_throttle_enabled=1 by default. Subsequent
testing has been unable to reproduce the suspected regression.
Tested-by: kernelOfTruth kerneloftruth@gmail.com
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf behlendorf1@llnl.gov
Reverts #5335Closes#5289Closes#5457
Save and reuse ddt dspace calculation when there have been no ddt changes.
This avoids unnecessary traversal of 168KiB of ddt histograms.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5425
It was observed that even when the txg history is disabled by
setting `zfs_txg_history=0` the txg_sync thread still fetches
the vdev stats unnecessarily.
This patch refactors the code such that vdev_get_stats() is no
longer called when `zfs_txg_history=0`. And it further reduces
the differences between upstream and the ZoL txg_sync_thread()
function.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5412
On some kernel version, blk_cleanup_queue and put_disk will wait for more then
10ms. So a pool with a lot of zvols will easily wait for more then 1 min if we
do zvol_free sequentially.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/588/head
Do parallel prefetch all zvol dnodes before actually creating each individual.
This will greatly reduce the import time when having a lot of zvols and disk
is slow.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
dbuf_read() creates a zio_root() to track and wait for all the
zio's that may happen as part of this call. However, if the blkptr_t
for this buffer is NULL or a hole, we will not create any more zio's,
so this zio_root() is unnecessary. This is always the case when calling
dbuf_read() on a bonus buffer, because it has no blkptr (it's part of
the containing dnode). For workloads that read a lot of bonus buffers
(e.g. file creation and removal), creating and destroying these
unnecessary zio's can decrease performance by around 3%.
The fix is to only create/destroy the zio_root() in dbuf_read() if
the blkptr is not NULL and not a hole.
Changes sponsored by Intel Corp.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue openzfs/openzfs#137
Closes#4803Closes#5382
This should be & and not | so is_metadata is set correctly.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5438
It looks like this was functionality which was added in the
original SA implementation and then never needed. It can
be safely removed now and easily added back if we find a
use for it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5440
zio.h includes zio_impl.h but zio_impl.h also includes zio.h, so the
header files to contain each other. Get rid of the zio_impl.h include
in zio.h and update zio_inject.c to include zio.h instead of zio_impl.h.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5439
RageLtMan
LOLi
Olaf Faaland
Debabrata Banerjee
jxiong
Brian Behlendorf
Yuri Pankov
Chunwei Chen
Dan Kimmel
wli5
Matthew Ahrens
dbavatar
DHE
Andriy Gapon
Giuseppe Di Natale
Giuseppe Di Natale
George Wilson
Don Brady
Steven Hartland
N Clark
Gvozden Neskovic
Chunwei Chen
Isaac Huang
Daniel Hoffman
Andriy Gapon
Tim Chase
George Melikov
David Quigley
Jörg Thalheim
bzzz77
ka7
bunder2015
luozhengzheng
cao