Commit Graph

42 Commits

Author SHA1 Message Date
rob-wing 69f024a56e
Configure zed's diagnosis engine with vdev properties
Introduce four new vdev properties:
    checksum_n
    checksum_t
    io_n
    io_t

These properties can be used for configuring the thresholds of zed's
diagnosis engine and are interpeted as <N> events in T <seconds>.

When this property is set to a non-default value on a top-level vdev,
those thresholds will also apply to its leaf vdevs. This behavior can be
overridden by explicitly setting the property on the leaf vdev.

Note that, these properties do not persist across vdev replacement. For
this reason, it is advisable to set the property on the top-level vdev
instead of the leaf vdev.

The default values for zed's diagnosis engine (10 events, 600 seconds)
remains unchanged.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology LLC
Closes #13805
2023-01-23 13:14:25 -08:00
Ameer Hamza 19d3961589
Use setproctitle to report progress of zfs send
This allows parsing of zfs send progress by checking the process
title.
Doing so requires some changes to the send code in libzfs_sendrecv.c;
primarily these changes move some of the accounting around, to allow
for the code to be verbose as normal, or set the process title. Unlike
BSD, setproctitle() isn't standard in Linux; thus, borrowed it from
libbsd with slight modifications.

Authored-by: Sean Eric Fagan <sef@FreeBSD.org>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14376
2023-01-17 10:17:35 -08:00
Allan Jude dc95911d21
zfs list: Allow more fields in ZFS_ITER_SIMPLE mode
If the fields to be listed and sorted by are constrained to those
populated by dsl_dataset_fast_stat(), then zfs list is much faster,
as it does not need to open each objset and reads its properties.

A previous optimization by Pawel Dawidek
(0cee24064a) took advantage
of this to make listing snapshot names sorted only by name much faster.

However, it was limited to `-o name -s name`, this work extends this
optimization to work with:
  - name
  - guid
  - createtxg
  - numclones
  - inconsistent
  - redacted
  - origin
and could be further extended to any other properties supported by
dsl_dataset_fast_stat() or similar, that do not require extra locking
or reading from disk.

This was committed before (9a9e2e343d),
but was reverted due to a regression when used with an older kernel.

If the kernel does not populate zc->zc_objset_stats, we now fallback
to getting the properties via the slower interface, to avoid problems
with newer userland and older kernels.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #14110
2022-12-13 17:27:54 -08:00
Mariusz Zaborski 16f0fdaddd
Allow to control failfast
Linux defaults to setting "failfast" on BIOs, so that the OS will not
retry IOs that fail, and instead report the error to ZFS.

In some cases, such as errors reported by the HBA driver, not
the device itself, we would wish to retry rather than generating
vdev errors in ZFS. This new property allows that.

This introduces a per vdev option to disable the failfast option.
This also introduces a global module parameter to define the failfast
mask value.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Seagate Technology LLC
Submitted-by: Klara, Inc.
Closes #14056
2022-11-10 13:37:12 -08:00
Umer Saleem 383c3eb33d Add membar_sync abi change
It appears membar_sync was not present in libzfs.abi with other
membar_* functions. This commit updates libzfs.abi for membar_sync.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #13969
2022-10-04 09:54:58 -07:00
Umer Saleem d9ac17a57f Expose libzutil error info in libpc_handle_t
In libzutil, for zpool_search_import and zpool_find_config, we use
libpc_handle_t internally, which does not maintain error code and it is
not exposed in the interface. Due to this, the error information is not
propagated to the caller. Instead, an error message is printed on
stderr.

This commit adds lpc_error field in libpc_handle_t and exposes it in
the interface, which can be used by the users of libzutil to get the
appropriate error information and handle it accordingly.

Users of the API can also control if they want to print the error
message on stderr.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #13969
2022-10-04 09:54:35 -07:00
Ameer Hamza 55c12724d3
zed: mark disks as REMOVED when they are removed
ZED does not take any action for disk removal events if there is no
spare VDEV available. Added zpool_vdev_remove_wanted() in libzfs
and vdev_remove_wanted() in vdev.c to remove the VDEV through ZED
on removal event.  This means that if you are running zed and
remove a disk, it will be properly marked as REMOVED.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #13797
2022-09-28 09:48:46 -07:00
Don Brady ede037cda7
Make zfs-share service resilient to stale exports
The are a few cases where stale entries in /etc/exports.d/zfs.exports 
will cause the nfs-server service to fail when starting up.

Since the nfs-server startup consumes /etc/exports.d/zfs.exports, the 
zfs-share service (which rebuilds the list of zfs exports) should run 
before the nfs-server service.

To make the zfs-share service resilient to stale exports, this change 
truncates the zfs config file as part of the zfs share -a operation.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #13775
2022-09-09 10:54:16 -07:00
Ryan Moeller 947465b984
libzfs: Remove unused zpool_get_physpath()
This is an oddly specific function that has never had any consumers in
the history of this repo.  Get rid of it and the pile of helper
functions that exist for it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #13724
2022-08-04 17:04:09 -07:00
Umer Saleem 9681de4657
Add snapshots_changed as property
Make dd_snap_cmtime property persistent across mount and unmount
operations by storing in ZAP and restore the value from ZAP on hold
into dd_snap_cmtime instead of updating it.

Expose dd_snap_cmtime as 'snapshots_changed' property that provides a
mechanism to quickly determine whether snapshot list for dataset has
changed without having to mount a dataset or iterate the snapshot list.

It specifies the time at which a snapshot for a dataset was last
created or deleted. This allows us to be more efficient how often we
query snapshots.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #13635
2022-08-02 16:45:30 -07:00
Will Andrews 4ed5e25074 Add Linux namespace delegation support
This allows ZFS datasets to be delegated to a user/mount namespace
Within that namespace, only the delegated datasets are visible
Works very similarly to Zones/Jailes on other ZFS OSes

As a user:
```
 $ unshare -Um
 $ zfs list
no datasets available
 $ echo $$
1234
```

As root:
```
 # zfs list
NAME                            ZONED  MOUNTPOINT
containers                      off    /containers
containers/host                 off    /containers/host
containers/host/child           off    /containers/host/child
containers/host/child/gchild    off    /containers/host/child/gchild
containers/unpriv               on     /unpriv
containers/unpriv/child         on     /unpriv/child
containers/unpriv/child/gchild  on     /unpriv/child/gchild

 # zfs zone /proc/1234/ns/user containers/unpriv
```

Back to the user namespace:
```
 $ zfs list
NAME                             USED  AVAIL     REFER  MOUNTPOINT
containers                       129M  47.8G       24K  /containers
containers/unpriv                128M  47.8G       24K  /unpriv
containers/unpriv/child          128M  47.8G      128M  /unpriv/child
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Will Andrews <will.andrews@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Buddy <https://buddy.works>
Closes #12263
2022-06-10 09:51:46 -07:00
Tino Reichardt 985c33b132
Introduce BLAKE3 checksums as an OpenZFS feature
This commit adds BLAKE3 checksums to OpenZFS, it has similar
performance to Edon-R, but without the caveats around the latter.

Homepage of BLAKE3: https://github.com/BLAKE3-team/BLAKE3
Wikipedia: https://en.wikipedia.org/wiki/BLAKE_(hash_function)#BLAKE3

Short description of Wikipedia:

  BLAKE3 is a cryptographic hash function based on Bao and BLAKE2,
  created by Jack O'Connor, Jean-Philippe Aumasson, Samuel Neves, and
  Zooko Wilcox-O'Hearn. It was announced on January 9, 2020, at Real
  World Crypto. BLAKE3 is a single algorithm with many desirable
  features (parallelism, XOF, KDF, PRF and MAC), in contrast to BLAKE
  and BLAKE2, which are algorithm families with multiple variants.
  BLAKE3 has a binary tree structure, so it supports a practically
  unlimited degree of parallelism (both SIMD and multithreading) given
  enough input. The official Rust and C implementations are
  dual-licensed as public domain (CC0) and the Apache License.

Along with adding the BLAKE3 hash into the OpenZFS infrastructure a
new benchmarking file called chksum_bench was introduced.  When read
it reports the speed of the available checksum functions.

On Linux: cat /proc/spl/kstat/zfs/chksum_bench
On FreeBSD: sysctl kstat.zfs.misc.chksum_bench

This is an example output of an i3-1005G1 test system with Debian 11:

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic     1196    1602    1761    1749    1762    1759    1751
skein-generic      546     591     608     615     619     612     616
sha256-generic     240     300     316     314     304     285     276
sha512-generic     353     441     467     476     472     467     426
blake3-generic     308     313     313     313     312     313     312
blake3-sse2        402    1289    1423    1446    1432    1458    1413
blake3-sse41       427    1470    1625    1704    1679    1607    1629
blake3-avx2        428    1920    3095    3343    3356    3318    3204
blake3-avx512      473    2687    4905    5836    5844    5643    5374

Output on Debian 5.10.0-10-amd64 system: (Ryzen 7 5800X)

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic     1840    2458    2665    2719    2711    2723    2693
skein-generic      870     966     996     992    1003    1005    1009
sha256-generic     415     442     453     455     457     457     457
sha512-generic     608     690     711     718     719     720     721
blake3-generic     301     313     311     309     309     310     310
blake3-sse2        343    1865    2124    2188    2180    2181    2186
blake3-sse41       364    2091    2396    2509    2463    2482    2488
blake3-avx2        365    2590    4399    4971    4915    4802    4764

Output on Debian 5.10.0-9-powerpc64le system: (POWER 9)

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic     1213    1703    1889    1918    1957    1902    1907
skein-generic      434     492     520     522     511     525     525
sha256-generic     167     183     187     188     188     187     188
sha512-generic     186     216     222     221     225     224     224
blake3-generic     153     152     154     153     151     153     153
blake3-sse2        391    1170    1366    1406    1428    1426    1414
blake3-sse41       352    1049    1212    1174    1262    1258    1259

Output on Debian 5.10.0-11-arm64 system: (Pi400)

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic      487     603     629     639     643     641     641
skein-generic      271     299     303     308     309     309     307
sha256-generic     117     127     128     130     130     129     130
sha512-generic     145     165     170     172     173     174     175
blake3-generic      81      29      71      89      89      89      89
blake3-sse2        112     323     368     379     380     371     374
blake3-sse41       101     315     357     368     369     364     360

Structurally, the new code is mainly split into these parts:
- 1x cross platform generic c variant: blake3_generic.c
- 4x assembly for X86-64 (SSE2, SSE4.1, AVX2, AVX512)
- 2x assembly for ARMv8 (NEON converted from SSE2)
- 2x assembly for PPC64-LE (POWER8 converted from SSE2)
- one file for switching between the implementations

Note the PPC64 assembly requires the VSX instruction set and the
kfpu_begin() / kfpu_end() calls on PowerPC were updated accordingly.

Reviewed-by: Felix Dörre <felix@dogcraft.de>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Closes #10058
Closes #12918
2022-06-08 15:55:57 -07:00
наб 2b4f2fc93c libzfs: return (allocated) strings instead of filling buffers
This also expands the zfs version output from 127 characters to However
Many Are Actually Set

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13330
2022-05-18 12:52:10 -07:00
наб 5ac80603bd libzfs: constify zfs_strip_partition(), zfs_strip_path()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13413
2022-05-16 15:56:53 -07:00
наб b4d9a82f62 Replace libzfs sharing _nfs() and _smb() APIs with protocol lists
With the additional benefit of removing all the _all() functions and
treating a NULL list as "all" ‒ the remaining all function is for all
/datasets/, which is consistent with the rest of the API

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13165
2022-05-12 09:26:42 -07:00
George Amanakis 0409d33273
Improve zpool status output, list all affected datasets
Currently, determining which datasets are affected by corruption is
a manual process.

The primary difficulty in reporting the list of affected snapshots is
that since the error was initially found, the snapshot where the error
originally occurred in, may have been deleted. To solve this issue, we
add the ID of the head dataset of the original snapshot which the error
was detected in, to the stored error report. Then any time a filesystem
is deleted, the errors associated with it are deleted as well. Any time
a clone promote occurs, we modify reports associated with the original
head to refer to the new head. The stored error reports are identified
by this head ID, the birth time of the block which the error occurred
in, as well as some information about the error itself are also stored.

Once this information is stored, we can find the set of datasets
affected by an error by walking back the list of snapshots in the given
head until we find one with the appropriate birth txg, and then traverse
through the snapshots of the clone family, terminating a branch if the
block was replaced in a given snapshot. Then we report this information
back to libzfs, and to the zpool status command, where it is displayed
as follows:

 pool: test
 state: ONLINE
status: One or more devices has experienced an error resulting in data
        corruption.  Applications may be affected.
action: Restore the file in question if possible.  Otherwise restore the
        entire pool from backup.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
  scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec  3
08:27:57 2021
config:

        NAME        STATE     READ WRITE CKSUM
        test        ONLINE       0     0     0
          sdb       ONLINE       0     0 1.58K

errors: Permanent errors have been detected in the following files:

        test@1:/test.0.0
        /test/test.0.0
        /test/1clone/test.0.0

A new feature flag is introduced to mark the presence of this change, as
well as promotion and backwards compatibility logic. This is an updated
version of #9175. Rebase required fixing the tests, updating the ABI of
libzfs, updating the man pages, fixing bugs, fixing the error returns,
and updating the old on-disk error logs to the new format when
activating the feature.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain <tulsi.jain@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #9175
Closes #12812
2022-04-25 17:25:42 -07:00
наб be8e1d81bf Flex non-pretty-printed properties and raw-/pretty-print remaining ones
Before:
nabijaczleweli@tarta:~/store/code/zfs$ /sbin/zpool list -Td -o name,size,alloc,free,ckpoint,expandsz,guid,load_guid,frag,cap,dedup,health,altroot,guid,dedupditto,load_guid,maxblocksize,maxdnodesize 2>/dev/null
Sun 20 Feb 03:57:44 CET 2022
NAME         SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   GUID  LOAD_GUID   FRAG    CAP  DEDUP    HEALTH  ALTROOT   GUID  DEDUPDITTO  LOAD_GUID  MAXBLOCKSIZE  MAXDNODESIZE
filling     25.5T  6.52T  18.9T        -       64M  11512889483096932869  11656109927366648364     1%    25%  1.00x    ONLINE  -        11512889483096932869           0  11656109927366648364       1048576         16384
tarta-boot   240M  50.6M   189M        -         -  2372068846917849656  7752280792179633787    12%    21%  1.00x    ONLINE  -        2372068846917849656           0  7752280792179633787       1048576           512
tarta-zoot  55.5G  6.42G  49.1G        -         -  12971868889665384604  8622632123393589527    17%    11%  1.00x    ONLINE  -        12971868889665384604           0  8622632123393589527       1048576         16384

nabijaczleweli@tarta:~/store/code/zfs$ /sbin/zfs list -o name,guid,keyguid,ivsetguid,createtxg,objsetid,pbkdf2iters,refratio -r tarta-zoot
NAME                                  GUID  KEYGUID  IVSETGUID  CREATETXG  OBJSETID  PBKDF2ITERS  REFRATIO
tarta-zoot                           1110930838977259561     659P          -          1        54            0     1.03x
tarta-zoot/PAGEFILE.SYS              2202570496672997800    3.20E          -       2163      1539            0     1.07x
tarta-zoot/dupa                      16941280502417785695    9.81E          -    2274707      1322  1000000000000     1.00x
tarta-zoot/etc                       17029963068508333530    12.9E          -       3663      1087            0     1.52x
tarta-zoot/home                      3508163802370032575    8.50E          -       3664       294            0     1.00x
tarta-zoot/home/misio                7283672744014848555    13.0E          -       3665       302            0     2.28x
tarta-zoot/home/nabijaczleweli       12286744508078616303    5.15E          -       3666       200            0     2.05x
tarta-zoot/home/nabijaczleweli/tftp  13551632689932817643    5.16E          -       3667      1095            0     1.00x
tarta-zoot/home/root                 5203106193060067946    15.4E          -       3668       698            0     2.86x
tarta-zoot/home/shared-config        8866040021005142194    14.5E          -       3670      2069            0     1.20x
tarta-zoot/home/tymek                9472751824283011822    4.56E          -       3671      1202            0     1.32x
tarta-zoot/oldboot                   10460192444135730377    13.8E          -    2268398      1232            0     1.01x
tarta-zoot/opt                       9945621324983170410    5.84E          -       3672      1210            0     1.00x
tarta-zoot/opt/icecc                 13178238931846132425    9.04E          -       3673      1103            0     2.83x
tarta-zoot/opt/swtpm                 10172962421514870859    4.13E          -     825669    145132            0     1.87x
tarta-zoot/srv                       217179989022738337    3.90E          -       3674      2469            0     1.00x
tarta-zoot/usr                       12214213243060765090    15.0E          -       3675      2477            0     2.58x
tarta-zoot/usr/local                 7542700368693813134     941P          -       3676      2484            0     2.33x
tarta-zoot/var                       13414177124447929530    10.2E          -       3677      2492            0     1.57x
tarta-zoot/var/lib                   6969944550407159241    5.28E          -       3678      2499            0     2.34x
tarta-zoot/var/tmp                   6399468088048343912    1.34E          -       3679      1218            0     3.95x

After:
nabijaczleweli@tarta:~/store/code/zfs$ cmd/zpool/zpool list -Td -o name,size,alloc,free,ckpoint,expandsz,guid,load_guid,frag,cap,dedup,health,altroot,guid,dedupditto,load_guid,maxblocksize,maxdnodesize 2>/dev/null
Sun 20 Feb 03:57:42 CET 2022
NAME         SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ                  GUID             LOAD_GUID   FRAG    CAP  DEDUP    HEALTH  ALTROOT                  GUID  DEDUPDITTO             LOAD_GUID  MAXBLOCKSIZE  MAXDNODESIZE
filling     25.5T  6.52T  18.9T        -       64M  11512889483096932869  11656109927366648364     1%    25%  1.00x    ONLINE  -        11512889483096932869           0  11656109927366648364            1M           16K
tarta-boot   240M  50.6M   189M        -         -   2372068846917849656   7752280792179633787    12%    21%  1.00x    ONLINE  -         2372068846917849656           0   7752280792179633787            1M           512
tarta-zoot  55.5G  6.42G  49.1G        -         -  12971868889665384604   8622632123393589527    17%    11%  1.00x    ONLINE  -        12971868889665384604           0   8622632123393589527            1M           16K

nabijaczleweli@tarta:~/store/code/zfs$ cmd/zfs/zfs list -o name,guid,keyguid,ivsetguid,createtxg,objsetid,pbkdf2iters,refratio -r tarta-zoot
NAME                                                 GUID               KEYGUID  IVSETGUID  CREATETXG  OBJSETID    PBKDF2ITERS  REFRATIO
tarta-zoot                            1110930838977259561    741529699813639505          -          1        54              0     1.03x
tarta-zoot/PAGEFILE.SYS               2202570496672997800   3689529982640017884          -       2163      1539              0     1.07x
tarta-zoot/dupa                      16941280502417785695  11312442953423259518          -    2274707      1322  1000000000000     1.00x
tarta-zoot/etc                       17029963068508333530  14852574366795347233          -       3663      1087              0     1.52x
tarta-zoot/home                       3508163802370032575   9802810070759776956          -       3664       294              0     1.00x
tarta-zoot/home/misio                 7283672744014848555  14983161489316798151          -       3665       302              0     2.28x
tarta-zoot/home/nabijaczleweli       12286744508078616303   5937870537299886218          -       3666       200              0     2.05x
tarta-zoot/home/nabijaczleweli/tftp  13551632689932817643   5950522828900813054          -       3667      1095              0     1.00x
tarta-zoot/home/root                  5203106193060067946  17718025091255443518          -       3668       698              0     2.86x
tarta-zoot/home/shared-config         8866040021005142194  16716354482778968577          -       3670      2069              0     1.20x
tarta-zoot/home/tymek                 9472751824283011822   5251854710505749954          -       3671      1202              0     1.32x
tarta-zoot/oldboot                   10460192444135730377  15894065034622168157          -    2268398      1232              0     1.01x
tarta-zoot/opt                        9945621324983170410   6737735639539098405          -       3672      1210              0     1.00x
tarta-zoot/opt/icecc                 13178238931846132425  10425145983015238428          -       3673      1103              0     2.83x
tarta-zoot/opt/swtpm                 10172962421514870859   4764783754852521469          -     825669    145132              0     1.87x
tarta-zoot/srv                         217179989022738337   4492810461439647259          -       3674      2469              0     1.00x
tarta-zoot/usr                       12214213243060765090  17306702395865262834          -       3675      2477              0     2.58x
tarta-zoot/usr/local                  7542700368693813134   1059954157997659784          -       3676      2484              0     2.33x
tarta-zoot/var                       13414177124447929530  11764397504176937123          -       3677      2492              0     1.57x
tarta-zoot/var/lib                    6969944550407159241   6084753728494937404          -       3678      2499              0     2.34x
tarta-zoot/var/tmp                    6399468088048343912   1548692824635344277          -       3679      1218              0     3.95x

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13122
Closes #13125
2022-03-04 12:08:33 -08:00
Jitendra Patidar 361a7e8211
log xattr=sa create/remove/update to ZIL
As such, there are no specific synchronous semantics defined for
the xattrs. But for xattr=on, it does log to ZIL and zil_commit() is
done, if sync=always is set on dataset. This provides sync semantics
for xattr=on with sync=always set on dataset.

For the xattr=sa implementation, it doesn't log to ZIL, so, even with
sync=always, xattrs are not guaranteed to be synced before xattr call
returns to caller. So, xattr can be lost if system crash happens, before
txg carrying xattr transaction is synced.

This change adds xattr=sa logging to ZIL on xattr create/remove/update
and xattrs are synced to ZIL (zil_commit() done) for sync=always.
This makes xattr=sa behavior similar to xattr=on.

Implementation notes:
The actual logging is fairly straight-forward and does not warrant
additional explanation.
However, it has been 14 years since we last added new TX types
to the ZIL [1], hence this is the first time we do it after the
introduction of zpool features. Therefore, here is an overview of the
feature activation and deactivation workflow:

1. The feature must be enabled. Otherwise, we don't log the new
    record type. This ensures compatibility with older software.
2. The feature is activated per-dataset, since the ZIL is per-dataset.
3. If the feature is enabled and dataset is not for zvol, any append to
    the ZIL chain will activate the feature for the dataset. Likewise
    for starting a new ZIL chain.
4. A dataset that doesn't have a ZIL chain has the feature deactivated.

We ensure (3) by activating on the first zil_commit() after the feature
was enabled. Since activating the features requires waiting for txg
sync, the first zil_commit() after enabling the feature will be slower
than usual. The downside is that this is really a conservative
approximation: even if we never append a 'TX_SETSAXATTR' to the ZIL
chain, we pay the penalty for feature activation. The upside is that the
user is in control of when we pay the penalty, i.e., upon enabling the
feature.

We ensure (4) by hooking into zil_sync(), where ZIL destroy actually
happens.

One more piece on feature activation, since it's spread across
multiple functions:

zil_commit()
  zil_process_commit_list()
    if lwb == NULL // first zil_commit since zil_open
      zil_create()
        if no log block pointer in ZIL header:
          if feature enabled and not active:
	    // CASE 1
            enable, COALESCE txg wait with dmu_tx that allocated the
	    log block
         else // log block was allocated earlier than this zil_open
          if feature enabled and not active:
	    // CASE 2
            enable, EXPLICIT txg wait
    else // already have an in-DRAM LWB
      if feature enabled and not active:
        // this happens when we enable the feature after zil_create
	// CASE 3
        enable, EXPLICIT txg wait

[1] da6c28aaf6

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes #8768 
Closes #9078
2022-02-22 13:06:43 -08:00
Damian Szuberski 63652e1546
Add `--enable-asan` and `--enable-ubsan` switches
`configure` now accepts `--enable-asan` and `--enable-ubsan` switches
which results in passing `-fsanitize=address`
and `-fsanitize=undefined`, respectively, to the compiler. Those
flags are enabled in GitHub workflows for ZTS and zloop. Errors
reported by both instrumentations are corrected, except for:

- Memory leak reporting is (temporarily) suppressed. The cost of
  fixing them is relatively high compared to the gains.

- Checksum computing functions in `module/zcommon/zfs_fletcher*`
  have UBSan errors suppressed. It is completely impractical
  to enforce 64-byte payload alignment there due to performance
  impact.

- There's no ASan heap poisoning in `module/zstd/lib/zstd.c`. A custom
  memory allocator is used there rendering that measure
  unfeasible.

- Memory leaks detection has to be suppressed for `cmd/zvol_id`.
  `zvol_id` is run by udev with the help of `ptrace(2)`. Tracing is
  incompatible with memory leaks detection.

Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12928
2022-02-03 14:35:38 -08:00
наб e1c720de7d
libefi: remove efi_type()
All it is right now is some #if 0ed Solaris code that returns ENOSYS,
and is only applicable for the Solaris blockdev layer.
In the Illumos gate, there's a single user: rmformat(1);
I recommend a read of the manual as a blast from the past, but, well

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12844
Closes #12969
2022-01-18 14:40:43 -08:00
наб 18168da727
module/*.ko: prune .data, global .rodata
Evaluated every variable that lives in .data (and globals in .rodata)
in the kernel modules, and constified/eliminated/localised them
appropriately. This means that all read-only data is now actually
read-only data, and, if possible, at file scope. A lot of previously-
global-symbols became inlinable (and inlined!) constants. Probably
not in a big Wowee Performance Moment, but hey.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12899
2022-01-14 15:37:55 -08:00
Paul Dagnelie 399b98198a
Revert "zfs list: Allow more fields in ZFS_ITER_SIMPLE mode"
This reverts commit f6a0dac84a.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #12938
2022-01-06 11:12:53 -08:00
наб eb51a9d747
zcommon: pre-iterate over sysfs instead of statting every feature
If sufficient memory (<2K, realistically) is available, libzfs_init()
can be significantly shorted by iterating over the correct sysfs
directory before registrations, we can turn 168 stats into 15/18
syscalls (3 opens (6 if built in), 3 fstats, 6 getdentses, and 3
closes), a tenfoldish reduction; this is probably a bit faster, too.

The list is always optional, and registration functions (and one-off
users) can simply pass NULL, which will fall back to the previous
mechanism

Also, don't allocate in zfs_mod_supported_impl, and use use access()
instead of stat(), since existence is really what we care about

Also, fix pre-prop-checking compat in fallback for built-in ZFS

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12089
2021-12-16 16:43:10 -08:00
Allan Jude f6a0dac84a
zfs list: Allow more fields in ZFS_ITER_SIMPLE mode
If the fields to be listed and sorted by are constrained
to those populated by dsl_dataset_fast_stat(), then
zfs list is much faster, as it does not need to open each
objset and reads its properties.

A previous optimization by Pawel Dawidek
(0cee24064a) took advantage
of this to make listing snapshot names sorted only by name
much faster.

However, it was limited to `-o name -s name`, this work
extends this optimization to work with:
  - name
  - guid
  - createtxg
  - numclones
  - inconsistent
  - redacted
  - origin
and could be further extended to any other properties
supported by dsl_dataset_fast_stat() or similar, that do
not require extra locking or reading from disk.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #11080
2021-12-16 11:56:22 -08:00
Paul Dagnelie 795075e638
Add `const` to nvlist functions to properly expose their real behavior
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #12728
2021-12-06 18:19:13 -07:00
Allan Jude 2a673e76a9
Vdev Properties Feature
Add properties, similar to pool properties, to each vdev.
This makes use of the existing per-vdev ZAP that was added as
part of device evacuation/removal.

A large number of read-only properties are exposed,
many of the members of struct vdev_t, that provide useful
statistics.

Adds support for read-only "removing" vdev property.
Adds the "allocating" property that defaults to "on" and
can be set to "off" to prevent future allocations from that
top-level vdev.

Supports user-defined vdev properties.
Includes support for properties.vdev in SYSFS.

Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #11711
2021-11-30 07:46:25 -07:00
Dimitri John Ledkov 6c8f03232a Upgrade to libabigail 2.0.0
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Closes #12722
Closes #12739
2021-11-09 17:36:42 -08:00
Brian Behlendorf 514498fef6
Simplify and document OpenZFS library dependencies
For those not already familiar with the code base it can be a
challenge to understand how the libraries are laid out.  This
has sometimes resulted in functionality being added in the
wrong place.  To help avoid that in the future this commit
documents the high-level dependencies for easy reference in
lib/Makefile.am.  It also simplifies a few things.

- Switched libzpool dependency on libzfs_core to libzutil.
  This change makes it clear libzpool should never depend
  on the ioctl() functionality provided by libzfs_core.

- Moved zfs_ioctl_fd() from libzutil to libzfs_core and
  renamed it lzc_ioctl_fd().  Normal access to the kmods
  should all be funneled through the libzfs_core library.
  The sole exception is the pool_active() which was updated
  to not use lzc_ioctl_fd() to remove the libzfs_core
  dependency.

- Removed libzfs_core dependency on libzutil.

- Removed the lib/libzfs/os/freebsd/libzfs_ioctl_compat.c
  source file which was all dead code.

- Removed libzfs_core dependency from mkbusy and ctime
  test utilities.  It was only needed for some trivial
  wrapper functions and that code is easy to replicate
  to shed the unneeded dependency.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12602
2021-10-07 11:31:26 -06:00
Jorgen Lundman 1d901c3ee5
Upstream: unmount snapshots before destroying them on macOS
Add function zfs_destroy_snaps_nvl_os() call. The main issue is that
macOS needs to unmount any mounted snapshots before they can be
destroyed. Other platforms can handle this in the kernel, but sending
a storm of zed events to unmount seems undesirable when we can do it
in userland to start with.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Co-authored-by: ilovezfs <ilovezfs@icloud.com>
Closes #12550
2021-09-20 09:29:59 -06:00
George Melikov 6ea058da16 Update ABI files via new libabigail version
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12529
2021-09-02 10:02:18 -07:00
Jorgen Lundman 3e8d5e4ff3
Add zpool_disable_datasets_os() / zfs_unmount_os()
zpool_disable_datasets_os():
macOS needs to do a bunch of work to kick everything off zvols.

zfs_unmount_os():
This allows us to unmount any zvols that may be mounted. Like with
zfs destroy foo/vol

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #12436
2021-08-31 09:56:00 -06:00
George Melikov 9776838cfb Update ABI files with generated in CI worker
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12388
2021-07-26 16:55:18 -07:00
наб 327c904615 lib{efi,avl,share,tpool,zfs_core,zfsbootenv,zutil}: -fvisibility=hidden
No symbols affected in libavl
No symbols affected by libtpool, but pre-ANSI declarations got purged
No symbols affected by libzfs_core
No symbols affected by libzfs_bootenv

libefi got cleaned, gained efi_debug documentation in efi_partition.h,
and removes one undocumented and unused symbol from libzfs_core:
  D default_vtoc_map

libnvpair saw removal of these symbols:
  D nv_alloc_nosleep_def
  D nv_alloc_sleep
  D nv_alloc_sleep_def
  D nv_fixed_ops_def
  D nvlist_hashtable_init_size
  D nvpair_max_recursion

libshare saw removal of these symbols from libzfs:
  T libshare_nfs_init
  T libshare_smb_init
  T register_fstype
  B smb_shares

libzutil saw removal of these internal symbols from libzfs_core:
  T label_paths
  T slice_cache_compare
  T zpool_find_import_blkid
  T zpool_open_func
  T zutil_alloc
  T zutil_strdup

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12191
2021-06-09 17:04:32 -07:00
наб 739cfb965b libzfs: convert to -fvisibility=hidden
Also mark all printf-like funxions in libzfs_impl.h as printf-like
and add --no-show-locs to storeabi, in hopes diffs will make more sense
in future

This removes these symbols from libzfs:
  D nfs_only
  T SHA256Init
  T SHA2Final
  T SHA2Init
  T SHA2Update
  T SHA384Init
  T SHA512Init
  D share_all_proto
  D smb_only
  T zfs_is_shared_proto
  W zpool_mount_datasets
  W zpool_unmount_datasets

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12048
2021-06-03 13:17:55 -07:00
наб 757df52928 libzfs: add zfs_get_underlying_type. Stop including libzfs_impl.h in cmd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12116
2021-05-29 14:26:38 -07:00
наб 37086897b0
libzfs: add keylocation=https://, backed by fetch(3) or libcurl
Add support for http and https to the keylocation properly to
allow encryption keys to be fetched from the specified URL.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #9543
Closes #9947 
Closes #11956
2021-05-12 21:21:35 -07:00
наб d197a150b4 libzfs: get rid of unused libzfs_handle::libzfs_{storeerr,chassis_id}
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11868
2021-04-13 14:15:06 -07:00
наб 533527725b libzfs: get rid of libzfs_handle::libzfs_mnttab
All users did a freopen() on it. Even some non-users did!
This is point-less ‒ just open the mtab when needed

If I understand Solaris' getextmntent(3C) correctly, the non-user
freopen()s are very likely an odd, twisted vestigial tail of that ‒
but it's got a completely different calling convention and caching
semantics than any platform we support

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11868
2021-04-13 14:14:44 -07:00
Colm e086db1656
Improvements to the 'compatibility' property
Several improvements to the operation of the 'compatibility' property:

1) Improved handling of unrecognized features:
Change the way unrecognized features in compatibility files are handled.

 * invalid features in files under /usr/share/zfs/compatibility.d
   only get a warning (as these may refer to future features not yet in
   the library),
 * invalid features in files under /etc/zfs/compatibility.d
   get an error (as these are presumed to refer to the current system).

2) Improved error reporting from zpool_load_compat.
Note: slight ABI change to zpool_load_compat for better error reporting.

3) compatibility=legacy inhibits all 'zpool upgrade' operations.

4) Detect when features are enabled outside current compatibility set
   * zpool set compatibility=foo <-- print a warning
   * zpool set feature@xxx=enabled <-- error
   * zpool status <-- indicate this state

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #11861
2021-04-12 09:08:56 -07:00
Brian Behlendorf 4ef03d077c Update libzfs.abi for zfs_send() change
Commit 099fa7e4 intentionally modified the libzfs ABI.  However, it
failed to include an update for the libzfs.abi file.  This commit
resolves the `make checkabi` warning due to that omission.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11710
2021-04-11 17:06:54 -07:00
Colm 658fb8020f
Add "compatibility" property for zpool feature sets
Property to allow sets of features to be specified; for compatibility
with specific versions / releases / external systems. Influences
the behavior of 'zpool upgrade' and 'zpool create'. Initial man
page changes and test cases included.

Brief synopsis:

zpool create -o compatibility=off|legacy|file[,file...] pool vdev...

compatibility = off : disable compatibility mode (enable all features)
compatibility = legacy : request that no features be enabled
compatibility = file[,file...] : read features from specified files.
Only features present in *all* files will be enabled on the
resulting pool. Filenames may be absolute, or relative to
/etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc
checked first).

Only affects zpool create, zpool upgrade and zpool status.

ABI changes in libzfs:

* New function "zpool_load_compat" to load and parse compat sets.
* Add "zpool_compat_status_t" typedef for compatibility parse status.
* Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum
* Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum

An initial set of base compatibility sets are included in
cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is
modified to install these in $pkgdatadir/compatibility.d and to
create symbolic links to a reasonable set of aliases.

Reviewed-by: ericloewe
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #11468
2021-02-17 21:30:45 -08:00
Brian Behlendorf 82611cdfe5 Add ABI snapshot
Add a snapshot of the current ABI using libabigail-1.7-2.  The
included ABI passes `make checkabi` for CentOS 7, Fedora 33,
Debian 10, and Ubuntu 20.04.  This covers a fairly wide range
of glibc, gcc, and libabigail versions plus other changes which
are platform specific.

Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11144
2020-11-17 09:21:39 -08:00