Commit Graph

3203 Commits

Author SHA1 Message Date
Romain Dolbeau 01a4852ecb
Fix early include of <linux/percpu_compat.h>
Move/add include of <linux/percpu_compat.h> to satisfy missing
requirements.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain@dolbeau.org>
Closes #10568 
Closes #10569
2020-07-15 15:58:15 -07:00
Matthew Ahrens 6774931dfa
Extend zdb to print inconsistencies in livelists and metaslabs
Livelists and spacemaps are data structures that are logs of allocations
and frees.  Livelists entries are block pointers (blkptr_t). Spacemaps
entries are ranges of numbers, most often used as to track
allocated/freed regions of metaslabs/vdevs.

These data structures can become self-inconsistent, for example if a
block or range can be "double allocated" (two allocation records without
an intervening free) or "double freed" (two free records without an
intervening allocation).

ZDB (as well as zfs running in the kernel) can detect these
inconsistencies when loading livelists and metaslab.  However, it
generally halts processing when the error is detected.

When analyzing an on-disk problem, we often want to know the entire set
of inconsistencies, which is not possible with the current behavior.
This commit adds a new flag, `zdb -y`, which analyzes the livelist and
metaslab data structures and displays all of their inconsistencies.
Note that this is different from the leak detection performed by
`zdb -b`, which checks for inconsistencies between the spacemaps and the
tree of block pointers, but assumes the spacemaps are self-consistent.

The specific checks added are:

Verify livelists by iterating through each sublivelists and:
- report leftover FREEs
- report double ALLOCs and double FREEs
- record leftover ALLOCs together with their TXG [see Cross Check]

Verify spacemaps by iterating over each metaslab and:
- iterate over spacemap and then the metaslab's entries in the
  spacemap log, then report any double FREEs and double ALLOCs

Verify that livelists are consistenet with spacemaps.  The space
referenced by livelists (after using the FREE's to cancel out
corresponding ALLOCs) should be allocated, according to the spacemaps.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-66031
Closes #10515
2020-07-14 17:51:05 -07:00
Alexander Motin 1743c737f5
Fix LOR between dp_config_rwlock and spa_props_lock
Our QE team during automated API testing hit deadlock in ZFS, caused
by lock order reversal.  From one side dsl_sync_task_sync() locks
dp_config_rwlock as writer and calls spa_sync_props(), which waits
for spa_props_lock.  From another spa_prop_get() locks spa_props_lock
and then calls dsl_pool_config_enter(), trying to lock dp_config_rwlock
as reader.

This patch makes spa_prop_get() lock dp_config_rwlock before
spa_props_lock, making the order consistent.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #10553
2020-07-14 12:21:57 -07:00
Brian Atkinson e4d3d77684
Fixing gang ABD child removal race condition
On linux the list debug code has been setting off a failure when
checking that the node->next->prev value is pointing back at the node.
At times this check evaluates to 0xdead. When removing a child from a
gang ABD we must acquire the child's abd_mtx to make sure that the
same ABD is not being added to another gang ABD while it is being
removed from a gang ABD. This fixes a race condition when checking
if an ABDs link is already active and part of another gang ABD before
adding it to a gang.

Added additional debug code for the gang ABD in abd_verify() to make
sure each child ABD has active links. Also check to make sure another
gang ABD is not added to a gang ABD.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10511
2020-07-14 11:04:35 -07:00
Matthew Ahrens e59a377a8f
filesystem_limit/snapshot_limit is incorrectly enforced against root
The filesystem_limit and snapshot_limit properties limit the number of
filesystems or snapshots that can be created below this dataset.
According to the manpage, "The limit is not enforced if the user is
allowed to change the limit."  Two types of users are allowed to change
the limit:

1. Those that have been delegated the `filesystem_limit` or
`snapshot_limit` permission, e.g. with
`zfs allow USER filesystem_limit DATASET`.  This works properly.

2. A user with elevated system privileges (e.g. root).  This does not
work - the root user will incorrectly get an error when trying to create
a snapshot/filesystem, if it exceeds the `_limit` property.

The problem is that `priv_policy_ns()` does not work if the `cred_t` is
not that of the current process.  This happens when
`dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a
sync task's check func) to determine the permissions of the
corresponding user process.

This commit fixes the issue by passing the `task_struct` (typedef'ed as
a `proc_t`) to syncing context, and then using `has_capability()` to
determine if that process is privileged.  Note that we still need to
pass the `cred_t` to syncing context so that we can check if the user
was delegated this permission with `zfs allow`.

This problem only impacts Linux.  Wrappers are added to FreeBSD but it
continues to use `priv_check_cred()`, which works on arbitrary `cred_t`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #8226
Closes #10545
2020-07-11 17:18:02 -07:00
Matthew Macy 3933305eac
FreeBSD: Use a hash table for taskqid lookups
Previously a tqent could be recycled prematurely, update the
code to use a hash table for lookups to resolve this.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10529
2020-07-11 17:13:45 -07:00
George Amanakis 2054f35e56
Fix a persistent L2ARC bug in l2arc_write_done()
In case l2arc_write_done() handles a zio that was not successful check
that the list of log block pointers is not empty when restoring them
in the device header. Otherwise zero them out. In any case perform the
actual write updating the device header after the zio of
l2arc_write_buffers() completes as l2arc_write_done() may have touched
the memory holding the log block pointers in the device header.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #10540 
Closes #10543
2020-07-10 14:10:03 -07:00
Mark Johnston cd32b4f5b7 Fix a deadlock in the FreeBSD getpages VOP
FreeBSD has a per-page "busy" lock which is held when handling a page
fault on a mapped file.  This lock is also acquired when copying data
from the DMU to the page cache in zfs_write().  File range locks are
also acquired in both of these paths, in the opposite order with respect
to the busy lock.

In the getpages VOP, the range lock is only used to determine the extent
of optional read-ahead and read-behind operations.  To resolve the lock
order reversal, modify the getpages VOP to avoid blocking on the range
lock.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #10519
2020-07-06 11:53:57 -07:00
Mark Johnston 6e00561712 Add a "try" operation for range locks
zfs_rangelock_tryenter() bails immediately instead of waiting for the
lock to become available.  This will be used to resolve a deadlock in
the FreeBSD page-in code.  No functional change intended.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #10519
2020-07-06 11:53:31 -07:00
Ryan Moeller 8a3d9186ba
Update zfs_freebsd_need_inactive to fix mmapped writes
`zfs_freebsd_need_inactive` appears to been based on an unfinished
version of https://reviews.freebsd.org/D22130 which had a bug where
files written via mmap wouldn't actually persist.

Update the function to match the final version committed to FreeBSD.

Authored-by: Mateusz Guzik <mjg@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10527 
Closes #10528
2020-07-03 11:30:04 -07:00
Brian Behlendorf 9a49d3f3d3
Add device rebuild feature
The device_rebuild feature enables sequential reconstruction when
resilvering.  Mirror vdevs can be rebuilt in LBA order which may
more quickly restore redundancy depending on the pools average block
size, overall fragmentation and the performance characteristics
of the devices.  However, block checksums cannot be verified
as part of the rebuild thus a scrub is automatically started after
the sequential resilver completes.

The new '-s' option has been added to the `zpool attach` and
`zpool replace` command to request sequential reconstruction
instead of healing reconstruction when resilvering.

    zpool attach -s <pool> <existing vdev> <new vdev>
    zpool replace -s <pool> <old vdev> <new vdev>

The `zpool status` output has been updated to report the progress
of sequential resilvering in the same way as healing resilvering.
The one notable difference is that multiple sequential resilvers
may be in progress as long as they're operating on different
top-level vdevs.

The `zpool wait -t resilver` command was extended to wait on
sequential resilvers.  From this perspective they are no different
than healing resilvers.

Sequential resilvers cannot be supported for RAIDZ, but are
compatible with the dRAID feature being developed.

As part of this change the resilver_restart_* tests were moved
in to the functional/replacement directory.  Additionally, the
replacement tests were renamed and extended to verify both
resilvering and rebuilding.

Original-patch-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: John Poduska <jpoduska@datto.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10349
2020-07-03 11:05:50 -07:00
Matthew Macy 7ddb753d17
freebsd: changes necessary to coexist with dtrace in tree
Fix header conflicts when building zfs with openzfs as a vendor import.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10497
2020-07-01 09:10:08 -07:00
Matthew Ahrens 3c42c9ed84
Clean up OS-specific ARC and kmem code
OS-specific code (e.g. under `module/os/linux`) does not need to share
its code structure with any other operating systems.  In particular, the
ARC and kmem code need not be similar to the code in illumos, because we
won't be syncing this OS-specific code between operating systems.  For
example, if/when illumos support is added to the common repo, we would
add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of
this code.

Therefore, we can simplify the code in the OS-specific ARC and kmem
routines.

These changes do not impact system behavior, they are purely code
cleanup.  The changes are:

Arenas are not used on Linux or FreeBSD (they are always `NULL`), so
`heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along
with code that uses them.

In `arc_available_memory()`:
 * `desfree` is unused, remove it
 * rename `freemem` to avoid conflict with pre-existing `#define`
 * remove checks related to arenas
 * use units of bytes, rather than converting from bytes to pages and
   then back to bytes

`SPL_KMEM_CACHE_REAP` is unused, remove it.

`skc_reap` is unused, remove it.

The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove
it.

`vmem_size()` and associated type and macros are unused, remove them.

In `arc_memory_throttle()`, use a less confusing variable name to store
the result of `arc_free_memory()`.

Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10499
2020-06-29 09:01:07 -07:00
Matthew Ahrens 270ece24b6
Revise SPL wrapper for shrinker callbacks
The SPL provides a wrapper for the kernel's shrinker callbacks, which
enables the ZFS code to interface with multiple versions of the shrinker
API's from different kernel versions.  Specifically, Linux kernels 3.0 -
3.11 has a single "combined" callback, and Linux kernels 3.12 and later
have two "split" callbacks.  The SPL provides a wrapper function so that
the ZFS code only needs to implement one version of the callbacks.

Currently the SPL's wrappers are designed such that the ZFS code
implements the older, "combined" callback.  There are a few downsides to
this approach:

* The general design within ZFS is for the latest Linux kernel to be
considered the "first class" API.

* The newer, "split" callback API is easier to understand, because each
callback has one purpose.

* The current wrappers do not completely abstract out the differing
API's, so ZFS code needs `#ifdef` code to handle the differing return
values required for different kernel versions.

This commit addresses these drawbacks by having the ZFS code provide the
latest, "split" callbacks, and the SPL provides a wrapping function for
the older, "combined" API.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10502
2020-06-27 10:27:02 -07:00
Serapheim Dimitropoulos ec1fea4516
Use percpu_counter for obj_alloc counter of Linux-backed caches
A previous commit enabled the tracking of object allocations
in Linux-backed caches from the SPL layer for debuggability.
The commit is: 9a170fc6fe

Unfortunately, it also introduced minor performance regressions
that were highlighted by the ZFS perf test-suite. Within Delphix
we found that the regression would be from -1%, all the way up
to -8% for some workloads.

This commit brings performance back up to par by creating a
separate counter for those caches and making it a percpu in
order to avoid lock-contention.

The initial performance testing was done by myself, and the
final round was conducted by @tonynguien who was also the one
that discovered the regression and highlighted the culprit.

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #10397
2020-06-26 18:06:50 -07:00
Arvind Sankar 7c902a5178 Include FreeBSD sources in module dist
Add os/freebsd and Makefile.bsd into distdir target.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10501
2020-06-26 14:19:35 -07:00
Matthew Ahrens 67c0f0dedc
ARC shrinking blocks reads/writes
ZFS registers a memory hook, `__arc_shrinker_func`, which is supposed to
allow the ARC to shrink when the kernel experiences memory pressure.
The ARC shrinker changes `arc_c` via a call to
`arc_reduce_target_size()`.  Before commit 3ec34e5527, the ARC
shrinker would also evict data from the ARC to bring `arc_size` down to
the new `arc_c`.  However, that commit (seemingly inadvertently) made it
so that the ARC shrinker no longer evicts any data or waits for eviction
to complete.

Repeated calls to the ARC shrinker can reduce `arc_c` drastically, often
all the way to `arc_c_min`.  Since it doesn't wait for the actual
eviction of data from the ARC, this creates a situation where `arc_size`
is more than `arc_c` for the several seconds/minutes it takes for
`arc_adjust_zthr` to evict data from the ARC.  During this time,
arc_get_data_impl() will block, so ZFS can't process read/write requests
(e.g. from iSCSI, NFS, or read/write syscalls).

To ensure that `arc_c` doesn't shrink faster than the adjust thread can
keep up, this commit makes the ARC shrinker wait for the eviction to
complete, resulting in similar behavior to what we had before commit
3ec34e5527.

Note: commit 3ec34e5527 is `OpenZFS 9284 - arc_reclaim_thread
has 2 jobs` and was integrated in December 2018, and is part of ZoL
0.8.x but not 0.7.x.

Additionally, when the ARC size is reduced drastically, the
`arc_adjust_zthr` can be on-CPU for many seconds without blocking.  Any
threads that are bound to the same CPU that arc_adjust_zthr is running
on will not able to run for a long time.

To ensure that CPU-bound threads can make progress, this commit changes
`arc_evict_state_impl()` make a voluntary preemption call,
`cond_resched()`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-70703
Closes #10496
2020-06-26 10:42:27 -07:00
Arvind Sankar 0b03254830 Fix tags targets in module/Makefile.in + cleanup
These targets look to have been copied from an automake-generated
Makefile.in, and can't work since none of the auto-generated automake
variables are defined here.

Moreover, ctags has been overridden in the top-level Makefile, so the
target is pointless anyway, and gtags is not a recursive target.

Fix cscopelist by moving it to the top-level Makefile as well, in line
with ctags and etags.

Also, add -a to ctags command as well, otherwise it won't work if more
than one xargs invocation takes place.

Add assembler files to ctags/etags, prune all dotted-dirs, and restrict
the find to files only.

Cleanup: add .PHONY to module/Makefile.in, and fix one recipe with a
missing continuation character.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:19:44 -07:00
Arvind Sankar 109d2c9310 Move zfs_gitrev.h to build directory
Currently an out-of-tree build does not work with read-only source
directory because zfs_gitrev.h can't be created. Move this file to the
build directory, which is more appropriate for a generated file, and
drop the dist-hook for zfs_gitrev.h. There is no need to distribute this
file since it will be regenerated as part of the compilation in any
case.

scripts/make_gitrev.sh tries to avoid updating zfs_gitrev.h if there has
been no change, however this doesn't cover the case when the source
directory is not in git: in that case zfs_gitrev.h gets overwritten even
though it's always "unknown". Simplify the logic to always write out a
new version of zfs_gitrev.h, compare against the old and overwrite only
if different. This is now simple enough to just include in the
Makefile, so drop the script.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:19:28 -07:00
Arvind Sankar 33982eb24c Support out-of-tree kmod build on FreeBSD
If srcdir != builddir, pass down MAKEOBJDIR to the FreeBSD make to
support out-of-tree builds.

Also allow passing all the gmake options that FreeBSD make understands
to support useful flags like -k, -n, -q etc, and detect the number of
CPUs if -j was specified without an argument.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:18:41 -07:00
Ryan Moeller 9192f27c1d
Add zfs_multihost_interval tunable handler for FreeBSD
This tunable required a handler to be implemented for
ZFS_MODULE_PARAM_CALL.

Add the handler so the tunable can be declared in common code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10490
2020-06-23 13:32:42 -07:00
Matthew Ahrens 540493ba4f
Clarify comments in config/*.m4, vdev_geom.c, zfs_allow_*.ksh
Rephrase comments to be more clear.

Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10481
2020-06-22 09:46:37 -07:00
Ryan Moeller 1c08fa8b5b
Fix copy-paste error breaking FreeBSD head
Resolve the FreeBSD head build failure.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10480
2020-06-19 15:12:34 -07:00
Ryan Moeller 2e6af52b2e
Match new vfs_checkexp KPI in FreeBSD head
KPI changed in FreeBSD, update accordingly.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10475
2020-06-18 13:45:36 -07:00
Arvind Sankar ae7b167a98 Enable -Wmissing-prototypes/-Wstrict-prototypes
Switch on warning flags to detect mismatch between declaration and
definition.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:53 -07:00
Arvind Sankar c0673571d0 Switch off -Wmissing-prototypes for libgcc math functions
spl-generic.c defines some of the libgcc integer library functions on
32-bit. Don't bother checking -Wmissing-prototypes since nothing should
directly call these functions from C code.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:46 -07:00
Arvind Sankar eebba5d8f4 Make Skein_{Get,Put}64_LSB_First inline functions
Turn the generic versions into inline functions and avoid
SKEIN_PORT_CODE trickery.

Also drop the PLATFORM_MUST_ALIGN check for using the fast bcopy
variants. bcopy doesn't assume alignment, and the userspace version is
currently different because the _ALIGNMENT_REQUIRED macro is only
defined by the kernelspace headers.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:38 -07:00
Arvind Sankar 0ce2de637b Add prototypes
Add prototypes/move prototypes to header files.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:32 -07:00
Arvind Sankar 60356b1a21 Add include files for prototypes
Include the header with prototypes in the file that provides definitions
as well, to catch any mismatch between prototype and definition.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:25 -07:00
Arvind Sankar c3fe42aabd Remove dead code
Delete unused functions.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:18 -07:00
Arvind Sankar 65c7cc49bf Mark functions as static
Mark functions used only in the same translation unit as static. This
only includes functions that do not have a prototype in a header file
either.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:20:38 -07:00
adilger f734301d22
linux: add basic fallocate(mode=0/2) compatibility
Implement semi-compatible functionality for mode=0 (preallocation)
and mode=FALLOC_FL_KEEP_SIZE (preallocation beyond EOF) for ZPL.

Since ZFS does COW and snapshots, preallocating blocks for a file
cannot guarantee that writes to the file will not run out of space.
Even if the first overwrite was guaranteed, it would not handle any
later overwrite of blocks due to COW, so strict compliance is futile.
Instead, make a best-effort check that at least enough free space is
currently available in the pool (with a bit of margin), then create
a sparse file of the requested size and continue on with life.

This does not handle all cases (e.g. several fallocate() calls before
writing into the files when the filesystem is nearly full), which
would require a more complex mechanism to be implemented, probably
based on a modified version of dmu_prealloc(), but is usable as-is.

A new module option zfs_fallocate_reserve_percent is used to control
the reserve margin for any single fallocate call.  By default, this
is 110% of the requested preallocation size, so an additional 10% of
available space is reserved for overhead to allow the application a
good chance of finishing the write when the fallocate() succeeds.
If the heuristics of this basic fallocate implementation are not
desirable, the old non-functional behavior of returning EOPNOTSUPP
for calls can be restored by setting zfs_fallocate_reserve_percent=0.

The parameter of zfs_statvfs() is changed to take an inode instead
of a dentry, since no dentry is available in zfs_fallocate_common().

A few tests from @behlendorf cover basic fallocate functionality.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Arshad Hussain <arshad.super@gmail.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Issue #326
Closes #10408
2020-06-18 11:22:11 -07:00
Matthew Macy 8056a75672
Disambiguate condvar API contract
On Illumos callers of cv_timedwait and cv_timedwait_hires
can't distinguish between whether or not the cv was signaled
or the call timed out. Illumos handles this (for some definition
of handles) by calling cv_signal in the return path if we were
signaled but the return value indicates instead that we timed
out. This would make sense if it were possible to query the the
cv for its net signal disposition. However, this isn't possible
and, in spite of the fact that there are places in the code that
clearly take a different and incompatible path if a timeout value
is indicated, this distinction appears to be rather subtle to most
developers. This problem is further compounded by the fact that on
Linux, calling cv_signal in the return path wouldn't even do the
right thing unless there are other waiters.

Since it is possible for the caller to independently determine how
much time is remaining but it is not possible to query if the cv
was in fact signaled, prioritizing signalling over timeout seems
like a cleaner solution. In addition, judging from usage patterns
within the code itself, it is also less error prone.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10471
2020-06-18 10:17:50 -07:00
Matthew Macy 7564073ed6
Add abd_cache_reap_now for abd_chunk_cache users
Apparently missed in the initial port integration was
the need to reap the abd_chunk_cache on FreeBSD. This
change addresses that oversight.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10474
2020-06-17 21:44:13 -07:00
Jorgen Lundman 4458157bee
zfs_ioctl: saved_poolname can be truncated
As it uses kmem_strdup() and kmem_strfree() which both rely on
strlen() being the same, but saved_poolname can be truncated causing:

SPL: kernel memory allocator:
buffer freed to wrong cache
SPL: buffer was allocated from kmem_alloc_16,
SPL: caller attempting free to kmem_alloc_8.
SPL: buffer=0xffffff90acc66a38  bufctl=0x0  cache: kmem_alloc_8

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10469
2020-06-17 14:30:03 -07:00
Alexander Motin 17ca30185a
Set initial arc_c to arc_c_min instead of arc_c_max
For at least 15 years since OpenSolaris arc_c was set by default to
arc_c_max, later decreased under memory pressure.  I've noticed that
if arc_c was set high enough to cause memory pressure as considered
by ZFS, setting of arc_no_grow to TRUE in arc_reap_cb_check() makes
no effect until both arc_kmem_reap_soon() and delay(reap_retry_ms)
return.  All that time ZFS can continue increasing its effective ARC
size, causing more memory pressure, potentially up to the point when
OS low memory handler activates and reduces arc_c, requesting fast
reclamation of just allocated memory.

The problem seems to be more serious on FreeBSD and I guess Linux,
since neither of them implement/use asynchronous kmem reclamation,
so arc_kmem_reap_soon() can take more time.  On older FreeBSD 11 not
supporting multiple memory domains system with lots of RAM can get
completely unresponsive for minutes due to heavy lock congestion
between ARC reclamation and page daemon kmem reclamation threads.
With this change to more conservative arc_c value ARC stops growing
just it time and does not need later reclamation.

Also while there, since now growing arc_c is a more often situation,
use aggsum_upper_bound() instead of aggsum_compare() in arc_adapt()
to reduce lock congestion.  It is also getting in sync with code in
arc_get_data_impl().

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #10437
2020-06-17 14:27:04 -07:00
Ryan Moeller 86a0f49483
FreeBSD: Kernel module should depend on xdr not krpc after 1300092
Since https://reviews.freebsd.org/D24408 FreeBSD provides XDR functions
in the xdr module instead of krpc.

For FreeBSD 13, the MODULE_DEPEND should be changed to xdr

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10442 
Closes #10443
2020-06-16 11:47:04 -07:00
Jorgen Lundman d366c8fd7a
Make struct vdev_disk_t be platform private
Linux defines different vdev_disk_t members to macOS, but they are
only used in vdev_disk.c so move the declaration there.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10452
2020-06-16 11:43:33 -07:00
Brian Atkinson 0a03495e3e
Fixing ABD struct allocation for FreeBSD
In the event we are allocating a gang ABD in FreeBSD we are passing 0
to abd_alloc_struct(); however, this led to an allocation of ABD scatter
with 0 chunks. This left the gang ABD allocation 24 bytes smaller than
it should have been.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10431
2020-06-16 10:05:22 -07:00
Jorgen Lundman 883a40fff4
Add convenience wrappers for common uio usage
The macOS uio struct is opaque and the API must be used, this
makes the smallest changes to the code for all platforms.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10412
2020-06-14 10:09:55 -07:00
Jorgen Lundman 4f73576ea1
Upstream: zil_commit_waiter() can stall forever
On macOS clock_t is unsigned, so when cv_timedwait_hires() returns -1
we loop forever. The conditional was tweaked to ignore signedness.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10445
2020-06-14 10:08:21 -07:00
Brian Atkinson e08b993396
Removing ZERO_PAGE abd_alloc_zero_scatter
For MIPS architectures on Linux the ZERO_PAGE macro references
empty_zero_page, which is exported as a GPL symbol. The call to
ZERO_PAGE in abd_alloc_zero_scatter has been removed and a single
zero'd page is now allocated for each of the pages in abd_zero_scatter
in the kernel ABD code path.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10428
2020-06-10 17:54:11 -07:00
Ryan Moeller feff3f69fc
Fixup "Avoid the GEOM topology lock recursion when autoexpanding a pool"
The patch was applied to vdev_geom_open instead of vdev_geom_close by
mistake.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10427
2020-06-10 11:05:15 -07:00
Arvind Sankar 71504277ae Cleanup linux module kbuild files
The linux module can be built either as an external module, or compiled
into the kernel, using copy-builtin. The source and build directories
are slightly different between the two cases, and currently, compiling
into the kernel still refers to some files from the configured ZFS
source tree, instead of the copies inside the kernel source tree. There
is also duplication between copy-builtin, which creates a Kbuild file to
build ZFS inside the kernel tree, and the top-level module/Makefile.in.

Fix this by moving the list of modules and the CFLAGS settings into a
new module/Kbuild.in, which will be used by the kernel kbuild
infrastructure, and using KBUILD_EXTMOD to distinguish the two cases
within the Makefiles, in order to choose appropriate include
directories etc.

Module CFLAGS setting is simplified by using subdir-ccflags-y (available
since 2.6.30) to set them in the top-level Kbuild instead of each
individual module. The disabling of -Wunused-but-set-variable is removed
from the lua and zfs modules. The variable that the Makefile uses is
actually not defined, so this has no effect; and the warning has long
been disabled by the kernel Makefile itself.

The target_cpu definition in module/{zfs,zcommon} is removed as it was
replaced by use of CONFIG_SPARC64 in
  commit 70835c5b75 ("Unify target_cpu handling")

os/linux/{spl,zfs} are removed from obj-m, as they are not modules in
themselves, but are included by the Makefile in the spl and zfs module
directories. The vestigial Makefiles in os and os/linux are removed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10379
Closes #10421
2020-06-10 09:24:15 -07:00
Andrea Gelmini dd4bc569b9
Fix typos
Correct various typos in the comments and tests.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #10423
2020-06-09 21:24:09 -07:00
Matthew Ahrens 7bcb7f0840
File incorrectly zeroed when receiving incremental stream that toggles -L
Background:

By increasing the recordsize property above the default of 128KB, a
filesystem may have "large" blocks.  By default, a send stream of such a
filesystem does not contain large WRITE records, instead it decreases
objects' block sizes to 128KB and splits the large blocks into 128KB
blocks, allowing the large-block filesystem to be received by a system
that does not support the `large_blocks` feature.  A send stream
generated by `zfs send -L` (or `--large-block`) preserves the large
block size on the receiving system, by using large WRITE records.

When receiving an incremental send stream for a filesystem with large
blocks, if the send stream's -L flag was toggled, a bug is encountered
in which the file's contents are incorrectly zeroed out.  The contents
of any blocks that were not modified by this send stream will be lost.
"Toggled" means that the previous send used `-L`, but this incremental
does not use `-L` (-L to no-L); or that the previous send did not use
`-L`, but this incremental does use `-L` (no-L to -L).

Changes:

This commit addresses the problem with several changes to the semantics
of zfs send/receive:

1. "-L to no-L" incrementals are rejected.  If the previous send used
`-L`, but this incremental does not use `-L`, the `zfs receive` will
fail with this error message:

    incremental send stream requires -L (--large-block), to match
    previous receive.

2. "no-L to -L" incrementals are handled correctly, preserving the
smaller (128KB) block size of any already-received files that used large
blocks on the sending system but were split by `zfs send` without the
`-L` flag.

3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`.
This feature indicates that we can correctly handle "no-L to -L"
incrementals.  This flag is currently not set on any send streams.  In
the future, we intend for incremental send streams of snapshots that
have large blocks to use `-L` by default, and these streams will also
have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams
from the default use of `zfs send` won't encounter the bug mentioned
above, because they can't be received by software with the bug.

Implementation notes:

To facilitate accessing the ZPL's generation number,
`zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and
restructured to fill in a struct with ZPL-specific info including owner
and generation.

In the "no-L to -L" case, if this is a compressed send stream (from
`zfs send -cL`), large WRITE records that are being written to small
(128KB) blocksize files need to be decompressed so that they can be
written split up into multiple blocks.  The zio pipeline will recompress
each smaller block individually.

A new test case, `send-L_toggle`, is added, which tests the "no-L to -L"
case and verifies that we get an error for the "-L to no-L" case.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #6224 
Closes #10383
2020-06-09 10:41:01 -07:00
George Amanakis b7654bd794
Trim L2ARC
The l2arc_evict() function is responsible for evicting buffers which
reference the next bytes of the L2ARC device to be overwritten. Teach
this function to additionally TRIM that vdev space before it is
overwritten if the device has been filled with data. This is done by
vdev_trim_simple() which trims by issuing a new type of TRIM,
TRIM_TYPE_SIMPLE.

We also implement a "Trim Ahead" feature. It is a zfs module parameter,
expressed in % of the current write size. This trims ahead of the
current write size. A minimum of 64MB will be trimmed. The default is 0
which disables TRIM on L2ARC as it can put significant stress to
underlying storage devices. To enable TRIM on L2ARC we set
l2arc_trim_ahead > 0.

We also implement TRIM of the whole cache device upon addition to a
pool, pool creation or when the header of the device is invalid upon
importing a pool or onlining a cache device. This is dependent on
l2arc_trim_ahead > 0. TRIM of the whole device is done with
TRIM_TYPE_MANUAL so that its status can be monitored by zpool status -t.
We save the TRIM state for the whole device and the time of completion
on-disk in the header, and restore these upon L2ARC rebuild so that
zpool status -t can correctly report them. Whole device TRIM is done
asynchronously so that the user can export of the pool or remove the
cache device while it is trimming (ie if it is too slow).

We do not TRIM the whole device if persistent L2ARC has been disabled by
l2arc_rebuild_enabled = 0 because we may not want to lose all cached
buffers (eg we may want to import the pool with
l2arc_rebuild_enabled = 0 only once because of memory pressure). If
persistent L2ARC has been disabled by setting the module parameter
l2arc_rebuild_blocks_min_l2size to a value greater than the size of the
cache device then the whole device is trimmed upon creation or import of
a pool if l2arc_trim_ahead > 0.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam D. Moss <c@yotes.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #9713
Closes #9789 
Closes #10224
2020-06-09 10:15:08 -07:00
Michael Niewöhner 32f26eaa70
Move GFP flags kernel compatibility code
Move the GFP flags kernel compat code from c file to kmem header.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #10424
2020-06-08 16:33:46 -07:00
Michael Niewöhner 080102a1b6
Linux 5.8 compat: __vmalloc()
The `pgprot` argument has been removed from `__vmalloc` in Linux 5.8,
being `PAGE_KERNEL` always now [1].

Detect this during configure and define a wrapper for older kernels.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/mm/vmalloc.c?h=next-20200605&id=88dca4ca5a93d2c09e5bbc6a62fbfc3af83c4fca

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #10422
2020-06-08 16:32:02 -07:00
Pawel Jakub Dawidek 529246df96
Restore support for in-kernel ZFS ioctls
In Illumos it is possible to call ioctl functions from within the
kernel by passing the FKIOCTL flag. Neither FreeBSD nor Linux support
that, but it doesn't hurt to keep it around, as all the code is there.

Before this commit it was a dead code and zc_iflags was always zero.
Restore this functionality by allowing to pass a flag to the
zfsdev_ioctl_common() function.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #10417
2020-06-08 13:57:22 -07:00
Pawel Jakub Dawidek 77b998fa70
Remove redundant includes
By removing excessive includes it takes us a small step close to
compiling this file in userland.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #10415
2020-06-08 09:57:36 -07:00
Jorgen Lundman c9e319faae
Replace sprintf()->snprintf() and strcpy()->strlcpy()
The strcpy() and sprintf() functions are deprecated on some platforms.
Care is needed to ensure correct size is used.  If some platforms
miss snprintf, we can add a #define to sprintf, likewise strlcpy().

The biggest change is adding a size parameter to zfs_id_to_fuidstr().

The various *_impl_get() functions are only used on linux and have
not yet been updated.

Reviewed by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10400
2020-06-07 11:42:12 -07:00
Ryan Moeller 60265072e0
Improve compatibility with C++ consumers
C++ is a little picky about not using keywords for names, or string
constness.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10409
2020-06-06 12:54:04 -07:00
Brian Behlendorf 63761a8f1a
zfsvfs_setup(): zap_stats_t may have undefined content when accessed (#10398)
Signed-off-by: Allan Jude <allanjude@klarasystems.com>

Co-authored-by: Allan Jude <allanjude@klarasystems.com>
2020-06-05 17:21:04 -07:00
Allan Jude 4547fc4e07
Connect dataset_kstats for FreeBSD
Expand the FreeBSD spl for kstats to support all current types

Move the dataset_kstats_t back to zvol_state_t from zfs_state_os_t
now that it is common once again

```
kstat.zfs/mypool.dataset.objset-0x10b.nunlinked: 0
kstat.zfs/mypool.dataset.objset-0x10b.nunlinks: 0
kstat.zfs/mypool.dataset.objset-0x10b.nread: 150528
kstat.zfs/mypool.dataset.objset-0x10b.reads: 48
kstat.zfs/mypool.dataset.objset-0x10b.nwritten: 134217728
kstat.zfs/mypool.dataset.objset-0x10b.writes: 1024
kstat.zfs/mypool.dataset.objset-0x10b.dataset_name: mypool/datasetname
```

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #10386
2020-06-05 17:17:02 -07:00
Paul Dagnelie 99b281f1ae
Fix double mutex_init bug in send code
It was possible to cause a kernel panic in the send code by 
initializing an already-initialized mutex, if a record was created 
with type DATA, destroyed with a different type (bypassing the 
mutex_destroy call) and then re-allocated as a DATA record again.

We tweak the logic to not change the type of a record once it has 
been created, avoiding the issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10374
2020-06-03 19:53:21 -07:00
Allan Jude 7da304bbce zfsvfs_setup(): zap_stats_t may have undefined content when accessed
Signed-off-by: Allan Jude <allanjude@klarasystems.com>
2020-06-03 22:20:27 +00:00
Ryan Moeller c0eb5c35ef
FreeBSD: Simplify zvol and fix locking
zvol_geom_bio_strategy should handle its own use of the zvol
suspend reader lock and ensure the zilog exists when needed.

A few other places using the zvol zilog should use the suspend
reader lock as well.

Simplify consumers of zvol_geom_bio_strategy, fix the locking, and
while in here, use the boolean_t constants with doread.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10381
2020-06-03 10:45:12 -07:00
Ryan Moeller a9dcfac51c
Periodically update ARC kstats
FreeBSD needs arc_adjust_zthr to run periodically for kstats to be
updated.  A comment in the code suggests this may have been the
original intent in illumos as well:

c946d5a913/module/zfs/arc.c (L4697-L4700)

Create the thread with a 1 second timer.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10371
2020-06-03 09:52:38 -07:00
Jorgen Lundman 081de9a86d
Restore avl_update() calls and related functions
The macOS kmem implementation uses avl_update() and related
functions.  These same function exist in the Solaris AVL code but
were removed because they were unused.  Restore them.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10390
2020-06-03 09:49:32 -07:00
Matthew Macy 3bf3b164ee
Fix crypto build on FreeBSD HEAD
Update API usage to reflect recent change.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10384
2020-05-30 12:54:57 -07:00
Jorgen Lundman 70a5fc0530
Memory leak in dsl_destroy_snapshots_nvl error case
The dsl_destroy_snapshots_nvl() function has an early error out, 
and temporary nvlists were not freed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10366
2020-05-26 16:13:41 -07:00
Brian Atkinson fb822260b1
Gang ABD Type
Adding the gang ABD type, which allows for linear and scatter ABDs to
be chained together into a single ABD.

This can be used to avoid doing memory copies to/from ABDs. An example
of this can be found in vdev_queue.c in the vdev_queue_aggregate()
function.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Brian <bwa@clemson.edu>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10069
2020-05-20 18:06:09 -07:00
DeHackEd 57434abae6
Use boot_ncpus in place of max_ncpus in taskq_create
Due to hotplug support or BIOS bugs sometimes max_ncpus can be
an absurdly high value. I have a system with 32 cores/threads
but reports max_ncpus == 440. This many threads potentially
cripples the system during arc_prune floods for example.

boot_ncpus is the number of working CPUs when called so use
that instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes #10282
2020-05-20 10:07:21 -07:00
Ryan Moeller 7b0e39030c
freebsd: Correct the order of arguments to copyin() for Q_SETQUOTA
Sponsored by: DARPA
External-issue: https://reviews.freebsd.org/D24656
FreeBSD-commit: freebsd/freebsd@a431c095d3

Authored by: jhb <jhb@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10344
2020-05-19 16:45:25 -07:00
Kyle Evans 5b090d57d4
freebsd: return EISDIR for read(2) on directories
This is arguably a change for internal consistency within OpenZFS, as the
Linux implementation will reject read(2) on directories with EISDIR. It's
not unreasonable for read(2) to do something here on FreeBSD, but we don't
currently copy out anything useful anyways so start rejecting it with the
appropriate error.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes #10338
2020-05-16 10:12:01 -07:00
Ryan Moeller d2782af461
Fix ZVOL_DIR
We only use ZVOL_DIR on FreeBSD, and on FreeBSD it isn't correct.

Move the definition to the file where it is needed, and define it as
/dev/zvol/.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10337
2020-05-16 10:10:38 -07:00
Matthew Ahrens 1b9cd1a9d9
Fix error handling in receive_writer_thread()
If `receive_writer_thread()` gets an error from `receive_process_record()`,
it should be saved in `rwa->err` so that we will stop processing records,
and the main thread will notice that the receive has failed.

When an error is first encountered, this happens correctly.  However, if
there are more records to dequeue, the next time through the loop we
will reset `rwa->err` to zero, allowing us to try to process the
following record (2 after the failed record).  Depending on what types
of records remain, we may incorrectly complete the receive
"successfully", but without actually having processed all the records.

The fix is to only set `rwa->err` if we got a *non-zero* error.

This bug was introduced by #10099 "Improve zfs receive performance by
batching writes".

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10320
2020-05-14 20:48:29 -07:00
yparitcher cdcce2f019
Fix VN_OPEN_INVFS typo
The VN_OPEN_INVFS literal is in the wrong field.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: yparitcher <y@paritcher.com>
Closes #10322
2020-05-14 20:47:14 -07:00
Brian Behlendorf 2ade659eb4
Fix abd_enter/exit_critical wrappers
Commit fc551d7 introduced the wrappers abd_enter_critical() and
abd_exit_critical() to mark critical sections.  On Linux these are
implemented with the local_irq_save() and local_irq_restore() macros
which set the 'flags' argument when saving.  By wrapping them with
a function the local variable is no longer set by the macro and is
no longer properly restored.

Convert abd_enter_critical() and abd_exit_critical() to macros to
resolve this issue and ensure the flags are properly restored.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10332
2020-05-14 20:45:16 -07:00
Jorgen Lundman eeb8fae9c7
Upstream: add missing thread_exit()
Undo FreeBSD wrapper for thread_create() added to call thread_exit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #10314
2020-05-14 15:58:09 -07:00
Matthew Ahrens 8b240f14f9
remove unneeded member drc_err of dmu_recv_cookie_t
The member drc_err of dmu_recv_cookie_t is used only locally in
receive_read, so we can replace it with a local variable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10319
2020-05-14 12:10:29 -07:00
John Poduska 41035a0496
Resilver restarts unnecessarily when it encounters errors
When a resilver finishes, vdev_dtl_reassess is called to hopefully
excise DTL_MISSING (amongst other things). If there are errors during
the resilver, they are tracked in DTL_SCRUB, as spelled out in the
block comment in vdev.c. DTL_SCRUB is in-core only, so it can only
be used if the pool was online for the whole resilver. This state is
tracked with the spa_scrub_started flag, which only gets set when
the scan is initialized. Unfortunately, this flag gets cleared right
before vdev_dtl_reassess gets called, so if there are any errors
during the scan, DTL_MISSING will never get excised and the resilver
will just continually restart. This fix simply moves clearing that
flag until after the call to vdev_dtl_reasses.

In addition, if a pool is imported and already has scn_errors > 0,
this change will restart the resilver immediately instead of doing
the rest of the scan and then restarting it from the beginning. On
the other hand, if scn_errors == 0 at import, then no errors have
been encountered so far, so the spa_scrub_started flag can be safely
set.

A test has been added to verify that resilver does not restart when
relevant DTL's are available.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: John Poduska <jpoduska@datto.com>
Closes #10291
2020-05-13 10:54:27 -07:00
Brian Atkinson fc551d7efb
Combine OS-independent ABD Code into Common Source File
Reorganizing ABD code base so OS-independent ABD code has been placed
into a common abd.c file. OS-dependent ABD code has been left in each
OS's ABD source files, and these source files have been renamed to
abd_os.

The OS-independent ABD code is now under:
module/zfs/abd.c
With the OS-dependent code in:
module/os/linux/zfs/abd_os.c
module/os/freebsd/zfs/abd_os.c

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #10293
2020-05-10 12:23:52 -07:00
George Amanakis 657fd33bcf
Improvements on persistent L2ARC
Functional changes:

We implement refcounts of log blocks and their aligned size on the
cache device along with two corresponding arcstats. The refcounts are
reflected in the header of the device and provide valuable information
as to whether log blocks are accounted for correctly. These are
dynamically adjusted as log blocks are committed/evicted. zdb also uses
this information in the device header and compares it to the
corresponding values as reported by dump_l2arc_log_blocks() which
emulates l2arc_rebuild(). If the refcounts saved in the device header
report higher values, zdb exits with an error. For this feature to work
correctly there should be no active writes on the device. This is also
employed in the tests of persistent L2ARC. We extend the structure of
the cache device header by adding the two new variables mirroring the
refcounts after the existing variables to preserve backward
compatibility in terms of persistent L2ARC.

1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which
   reflect the total aligned size of log blocks on the device. This is
   also reflected in the header of the cache device as "dh_lb_asize".
2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count"
   which reflect the total number of L2ARC log blocks present on cache
   devices.  It is also reflected in the header of the cache device as
   "dh_lb_count".

In l2arc_rebuild_vdev() if the amount of committed log entries in a log
block is 0 and the device header is valid we update the device header.
This will facilitate trimming of the whole device in this case when
TRIM for L2ARC is implemented.

Improve loop protection in l2arc_rebuild() by using the starting offset
of the payload of each log block instead of the starting offset of the
log block.

If the zio in l2arc_write_buffers() fails, restore the lbps array in the
header of the device to its previous state in l2arc_write_done().

If l2arc_rebuild() ends the rebuild process without restoring any L2ARC
log blocks in ARC and without any other error, this means that the lbps
array in the header is pointing to non-existent or invalid log blocks.
Reset the device header in this case.

In l2arc_rebuild() change the zfs_dbgmsg messages to
spa_history_log_internal() making them user visible with zpool history
command.

Non-functional changes:

Make the first test in persistent L2ARC use `zdb -lll` to increase
coverage in `zdb.c`.

Rename psize with asize when referring to log blocks, since
L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also
rename dh_log_blk_entries to dh_log_entries to make it clear that
it is a mirror of l2ad_log_entries. Added comments for both changes.

Fix inaccurate comments for example in l2arc_log_blk_restore().

Add asserts at the end in l2arc_evict() and l2arc_write_buffers().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #10228
2020-05-07 16:34:03 -07:00
Paul Dagnelie 108a454a46
Add support for boot environment data to be stored in the label
Modern bootloaders leverage data stored in the root filesystem to 
enable some of their powerful features. GRUB specifically has a grubenv 
file which can store large amounts of configuration data that can be 
read and written at boot time and during normal operation. This allows 
sysadmins to configure useful features like automated failover after 
failed boot attempts. Unfortunately, due to the Copy-on-Write nature 
of ZFS, the standard behavior of these tools cannot handle writing to
ZFS files safely at boot time. We need an alternative way to store 
data that allows the bootloader to make changes to the data.

This work is very similar to work that was done on Illumos to enable 
similar functionality in the FreeBSD bootloader. This patch is different 
in that the data being stored is a raw grubenv file; this file can store 
arbitrary variables and values, and the scripting provided by grub is 
powerful enough that special structures are not required to implement 
advanced behavior.

We repurpose the second padding area in each label to store the grubenv 
file, protected by an embedded checksum. We add two ioctls to get and 
set this data, and libzfs_core and libzfs functions to access them more 
easily. There are no direct command line interfaces to these functions; 
these will be added directly to the bootloader utilities.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10009
2020-05-07 09:36:33 -07:00
George Amanakis 1b664952ae
Enable splitting mirrors with indirect vdevs
When a top-level vdev is removed from a pool it is converted to an
indirect vdev. Until now splitting such mirrored pools was not possible
with zpool split. This patch enables handling of indirect vdevs and
splitting of those pools with zpool split.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #10283
2020-05-06 10:32:28 -07:00
Ryan Moeller ddc7a2dd3b
taskq: Don't leak system_delay_taskq on FreeBSD
Adds a missing taskq_destroy() call.

Reported by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10292
2020-05-05 09:36:41 -07:00
Ryan Moeller 6f3e1a4828
Avoid the GEOM topology lock recursion when autoexpanding a pool
The steps to reproduce the problem:

        mdconfig -a -t swap -s 3g -u 0
        gpart create -s GPT md0
        gpart add -t freebsd-zfs -s 1g md0
        zpool create -o autoexpand=on foo md0p1
        gpart resize -i 1 -s 2g md0

Authored by: pjd <pjd@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@bccd2db598

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Ported-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10270
2020-05-04 15:10:41 -07:00
Ryan Moeller 639dfeb831
Update FreeBSD SPL atomics
Sync up with the following changes from FreeBSD:

ZFS: add emulation of atomic_swap_64 and atomic_load_64

Some 32-bit platforms do not provide 64-bit atomic operations that ZFS
requires, either in userland or at all.  We emulate those operations
for those platforms using a mutex.  That is not entirely correct and
it's very efficient.  Besides, the loads are plain loads, so torn
values are possible.

Nevertheless, the emulation seems to work for some definition of work.

This change adds atomic_swap_64, which is already used in ZFS code,
and atomic_load_64 that can be used to prevent torn reads.

Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@3458e5d1e6

cleanup of illumos compatibility atomics

atomic_cas_32 is implemented using atomic_fcmpset_32 on all platforms.
Ditto for atomic_cas_64 and atomic_fcmpset_64 on platforms that have
it.  The only exception is sparc64 that provides MD atomic_cas_32 and
atomic_cas_64.
This is slightly inefficient as fcmpset reports whether the operation
updated the target and that information is not needed for cas.
Nevertheless, there is less code to maintain and to add for new
platforms.  Also, the operations are done inline now as opposed to
function calls before.

atomic_add_64_nv is implemented using atomic_fetchadd_64 on platforms
that provide it.

casptr, cas32, atomic_or_8, atomic_or_8_nv are completely removed as
they have no users.

atomic_mtx that is used to emulate 64-bit atomics on platforms that
lack them is defined only on those platforms.

As a result, platform specific opensolaris_atomic.S files have lost
most of their code.  The only exception is i386 where the
compat+contrib code provides 64-bit atomics for userland use.  That
code assumes availability of cmpxchg8b instruction.  FreeBSD does not
have that assumption for i386 userland and does not provide 64-bit
atomics.  Hopefully, this can and will be fixed.

Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@e9642c209b

emulate illumos membar_producer with atomic_thread_fence_rel

membar_producer is supposed to be a store-store barrier.
Also, in the code that FreeBSD has ported from illumos membar_producer
is used only with regular stores to regular memory (with respect to
caching).

We do not have an MI primitive for the store-store barrier, so
atomic_thread_fence_rel is the closest we have as it provides
(load | store) -> store barrier.

Previously, membar_producer was an empty function call on all 32-bit
arm-s, 32-bit powerpc, riscv and all mips variants.  I think that it
was inadequate.
On other platforms, such as amd64, arm64, i386, powerpc64, sparc64,
membar_producer was implemented using stronger primitives than required
for a store-store barrier with respect to regular memory access.
For example, it used sfence on amd64 and lock-ed nop in i386 (despite
TSO).
On powerpc64 we now use recommended lwsync instead of eieio.
On sparc64 FreeBSD uses TSO mode.
On arm64/aarch64 we now use dmb sy instead of dmb ish.  Not sure if
this is an improvement, actually.

After this change we can drop opensolaris_atomic.S for aarch64, amd64,
powerpc64 and sparc64 as all required atomic operations have either
direct or light-weight mapping to FreeBSD native atomic operations.

Discussed with: kib
Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@50cdda62fc

fix up r353340, don't assume that fcmpset has strong semantics

fcmpset can have two kinds of semantics, weak and strong.
For practical purposes, strong semantics means that if fcmpset fails
then the reported current value is always different from the expected
value.  Weak semantics means that the reported current value may be the
same as the expected value even though fcmpset failed.  That's a so
called "sporadic" failure.

I originally implemented atomic_cas expecting strong semantics, but
many platforms actually have weak one.

Reported by:    pkubaj (not confirmed if same issue)
Discussed with: kib, mjg
Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@238787c74e

[PowerPC] [MIPS] Implement 32-bit kernel emulation of atomic64 operations

This is a lock-based emulation of 64-bit atomics for kernel use, split off
from an earlier patch by jhibbits.

This is needed to unblock future improvements that reduce the need for
locking on 64-bit platforms by using atomic updates.

The implementation allows for future integration with userland atomic64,
but as that implies going through sysarch for every use, the current
status quo of userland doing its own locking may be for the best.

Submitted by:   jhibbits (original patch), kevans (mips bits)
Reviewed by:    jhibbits, jeff, kevans
Authored by: bdragon <bdragon@FreeBSD.org>
Differential Revision:  https://reviews.freebsd.org/D22976
FreeBSD-commit: freebsd/freebsd@db39dab3a8

Remove sparc64 kernel support

Remove all sparc64 specific files
Remove all sparc64 ifdefs
Removee indireeect sparc64 ifdefs

Authored by: imp <imp@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@48b94864c5

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Ported-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10250
2020-05-04 15:07:04 -07:00
Paul B. Henson 0aeb0bed6f OpenZFS 6765 - zfs_zaccess_delete() comments do not accurately
reflect delete permissions for ACLs

Authored by: Kevin Crowe <kevin.crowe@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>

Porting Notes:
* Only comments are updated

OpenZFS-issue: https://www.illumos.org/issues/6765
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/da412744bc
Closes #10266
2020-04-30 11:24:55 -07:00
Paul B. Henson 235a856576 OpenZFS 6762 - POSIX write should imply DELETE_CHILD on directories
- and some additional considerations

Authored by: Kevin Crowe <kevin.crowe@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/6762
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1eb4e906ec
Closes #10266
2020-04-30 11:24:38 -07:00
Paul B. Henson 99495ba6ab OpenZFS 8984 - fix for 6764 breaks ACL inheritance
Authored by: Dominik Hassler <hadfl@omniosce.org>
Reviewed by: Sam Zaydel <szaydel@racktopsystems.com>
Reviewed by: Paul B. Henson <henson@acm.org>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/8984
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e9bacc6d1a
Closes #10266
2020-04-30 11:24:27 -07:00
Paul B. Henson 5a2f527d4b OpenZFS 6764 - zfs issues with inheritance flags during chmod(2)
with aclmode=passthrough

Authored by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/6764
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/de0f1ddb59
Closes #10266
2020-04-30 11:24:14 -07:00
Paul B. Henson 7bf3e1fa0f OpenZFS 3254 - add support in zfs for aclmode=restricted
Authored-by: Paul B. Henson <henson@acm.org>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/3254
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/71dbfc287c
Closes #10266
2020-04-30 11:23:59 -07:00
Paul B. Henson a1af567bb6 OpenZFS 742 - Resurrect the ZFS "aclmode" property OpenZFS 664 - Umask masking "deny" ACL entries OpenZFS 279 - Bug in the new ACL (post-PSARC/2010/029) semantics
Porting notes:
* Updated zfs_acl_chmod to take 'boolean_t isdir' as first parameter
  rather than 'zfsvfs_t *zfsvfs'
* zfs man pages changes mixed between zfs and new zfsprops man pages

Reviewed by: Aram Hvrneanu <aram@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Robert Gordon <rbg@openrbg.com>
Reviewed by: Mark.Maybee@oracle.com
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@nexenta.com>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/742
OpenZFS-issue: https://www.illumos.org/issues/664
OpenZFS-issue: https://www.illumos.org/issues/279
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3c49ce110
Closes #10266
2020-04-30 11:22:45 -07:00
Brian Behlendorf ab16c87e55
Add longjmp support for Thumb-2
When a Thumb-2 kernel is being used, then longjmp must be implemented
using the Thumb-2 instruction set in module/lua/setjmp/setjmp_arm.S.

Original-patch-by: @jsrlabs
Reviewed-by: @awehrfritz
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7408 
Closes #9957 
Closes #9967
2020-04-29 17:30:13 -07:00
George Amanakis fa25460538
Add missing zfs_refcount_destroy() in key_mapping_rele()
Otherwise when running with reference_tracking_enable=TRUE mounting
and unmounting an encrypted dataset panics with:

Call Trace:
 dump_stack+0x66/0x90
 slab_err+0xcd/0xf2
 ? __kmalloc+0x174/0x260
 ? __kmem_cache_shutdown+0x158/0x240
 __kmem_cache_shutdown.cold+0x1d/0x115
 shutdown_cache+0x11/0x140
 kmem_cache_destroy+0x210/0x230
 spl_kmem_cache_destroy+0x122/0x3e0 [spl]
 zfs_refcount_fini+0x11/0x20 [zfs]
 spa_fini+0x4b/0x120 [zfs]
 zfs_kmod_fini+0x6b/0xa0 [zfs]
 _fini+0xa/0x68c [zfs]
 __x64_sys_delete_module+0x19c/0x2b0
 do_syscall_64+0x5b/0x1a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-By: Tom Caputi <tcaputi@datto.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #10246
2020-04-28 09:53:45 -07:00
Ryan Moeller a8085184d6
Fix zlib leak on FreeBSD
zlib_inflateEnd was accidentally a wrapper for inflateInit instead of
inflateEnd, and hilarity ensues.

Fix the typo so we free memory instead of allocating more.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10225
Closes #10252
2020-04-28 09:14:30 -07:00
Tom Caputi aa646323db
Fix missing ivset guid with resumed raw base recv
This patch corrects a bug introduced in 61152d1069. When
resuming a raw base receive, the dmu_recv code always sets
drc->drc_fromsnapobj to the object ID of the previous
snapshot. For incrementals, this is correct, but for base
sends, this should be left at 0. The presence of this ID
eventually allows a check to run which determines whether
or not the incoming stream and the previous snapshot have
matching IVset guids. This check fails becuase it is not
meant to run when there is no previous snapshot. When it
does fail, the user receives an error stating that the
incoming stream has the problem outlined in errata 4.

This patch corrects this issue by simply ensuring
drc->drc_fromsnapobj is left as 0 for base receives.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #10234 
Closes #10239
2020-04-24 19:00:32 -07:00
Matthew Ahrens 196bee4cfd
Remove deduplicated send/receive code
Deduplicated send streams (i.e. `zfs send -D` and `zfs receive` of such
streams) are deprecated.  Deduplicated send streams can be received by
first converting them to non-deduplicated with the `zstream redup`
command.

This commit removes the code for sending and receiving deduplicated send
streams.  `zfs send -D` will now print a warning, ignore the `-D` flag,
and generate a regular (non-deduplicated) send stream.  `zfs receive` of
a deduplicated send stream will print an error message and fail.

The resulting code simplification (especially in the kernel's support
for receiving dedup streams) should help enable future performance
enhancements.

Several new tests are added which leverage `zstream redup`.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Issue #7887
Issue #10117
Issue #10156
Closes #10212
2020-04-23 10:06:57 -07:00
Matthew Ahrens 32d805c3e2
Use a struct to organize metaslab-group-allocator fields
Each metaslab group (of which there is one per top-level vdev) has
several (4, by default) "metaslab group allocators".  Each "allocator"
has its own metaslab that it prefers to allocate from (the "primary"
allocator), and each can perform allocations concurrently with the other
allocators.  In addition to the primary metaslab, there are several
other fields that need to be tracked separately for each allocator.
These are currently stored as several arrays in the metaslab_group_t,
each array indexed by allocator number.

This change organizes all the metaslab-group-allocator-specific fields
into a new struct, metaslab_group_allocator_t.  The metaslab_group_t now
needs only one array indexed by the allocator number - which contains
the metaslab_group_allocator_t's.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10213
2020-04-22 10:26:56 -07:00
Matthew Ahrens 1f043c8be1
Fix zfs send progress reporting
The progress of a send is supposed to be reported by `zfs send -v`, but
it is not.  This works by creating a new user thread (with
pthread_create()) which does ZFS_IOC_SEND_PROGRESS ioctls to check how
much progress has been made.  This IOCTL finds the specified send (since
there may be multiple concurrent sends in the system).  The IOCTL also
checks that the specified send was started by the current process.

On Linux, different threads of the same process are represented as
different `struct task_struct`s (and, confusingly, have different
PID's).  To check if if two threads are in the same process, we need to
check if they have the same `struct task_struct:group_leader`.

We used to to this correctly, but it was inadvertently changed by
30af21b025 (Redacted Send) to simply check if the current
`struct task_struct` is the one that started the send.

This commit changes the code back to checking if the send was started by
a `struct task_struct` with the same `group_leader` as the calling
thread.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Chris Wedgwood <cw@f00f.org>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10215 
Closes #10216
2020-04-20 10:12:48 -07:00
Matthew Macy c614fd6e12
Use new FreeBSD API to largely eliminate object locking
Propagate changes in HEAD that mostly eliminate object locking.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10205
2020-04-17 09:30:26 -07:00
George Amanakis 9249f1272e
Persistent L2ARC minor fixes
Minor fixes on persistent L2ARC improving code readability and fixing 
a typo in zdb.c when byte-swapping a log block. It also improves the 
pesist_l2arc_007_pos.ksh test by giving it more time to retrieve log 
blocks on the cache device.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam D. Moss <c@yotes.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #10210
2020-04-17 09:27:40 -07:00
Ryan Moeller a7929f3137
Update FreeBSD tunables
Remove some obsolete legacy compat, rename some misnamed, and add some
missing tunables for FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10203
2020-04-15 11:14:47 -07:00
Matthew Macy 9f0a21e641
Add FreeBSD support to OpenZFS
Add the FreeBSD platform code to the OpenZFS repository.  As of this
commit the source can be compiled and tested on FreeBSD 11 and 12.
Subsequent commits are now required to compile on FreeBSD and Linux.
Additionally, they must pass the ZFS Test Suite on FreeBSD which is
being run by the CI.  As of this commit 1230 tests pass on FreeBSD
and there are no unexpected failures.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #898 
Closes #8987
2020-04-14 11:36:28 -07:00
Brian Behlendorf 791e480c6a
Disable user space reference tracking
The memory and cpu cost of reference count tracking with the current
implementation is significant.  For this reason it has always been
disabled by default for the kmods.  Apply this same default to user
space so ztest doesn't always incur this performance penalty.

Our intention is to re-enable this by default for ztest once the code
has been optimized.  Since we expect to at some point provide a FUSE
implementation we wouldn't want this enabled by default for libzpool.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10189
2020-04-13 10:51:44 -07:00
Matthew Ahrens 20f287855a
zvol_write() can use dmu_tx_hold_write_by_dnode()
We can improve the performance of writes to zvols by using
dmu_tx_hold_write_by_dnode() instead of dmu_tx_hold_write().  This
reduces lock contention on the first block of the dnode object, and also
reduces the amount of CPU needed.  The benefit will be highest with
multi-threaded async writes (i.e. writes that don't call zil_commit()).

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10184
2020-04-10 21:14:01 -07:00
George Amanakis 77f6826b83
Persistent L2ARC
This commit makes the L2ARC persistent across reboots. We implement
a light-weight persistent L2ARC metadata structure that allows L2ARC
contents to be recovered after a reboot. This significantly eases the
impact a reboot has on read performance on systems with large caches.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Saso Kiselkov <skiselkov@gmail.com>
Co-authored-by: Jorgen Lundman <lundman@lundman.net>
Co-authored-by: George Amanakis <gamanakis@gmail.com>
Ported-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #925 
Closes #1823 
Closes #2672 
Closes #3744 
Closes #9582
2020-04-10 10:33:35 -07:00
Ryan Moeller 36a6e2335c
Don't ignore zfs_arc_max below allmem/32
Set arc_c_min before arc_c_max so that when zfs_arc_min is set lower
than the default allmem/32 zfs_arc_max can also be set lower.

Add warning messages when tunables are being ignored.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10157
Closes #10158
2020-04-09 15:39:48 -07:00
Matthew Macy 8b27e08ed8
Add separate field for indicating that spa is in middle of split
By default it's not possible to open a device already owned by an
active vdev. It's necessary to make an exception to this for vdev
split. The FreeBSD platform code will make an exception if
spa_is splitting is set to to true.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10178
2020-04-09 09:59:31 -07:00
Brian Behlendorf 68dde63d13
Linux 5.7 compat: blk_alloc_queue()
Commit https://github.com/torvalds/linux/commit/3d745ea5 simplified
the blk_alloc_queue() interface by updating it to take the request
queue as an argument.  Add a wrapper function which accepts the new
arguments and internally uses the available interfaces.

Other minor changes include increasing the Linux-Maximum to 5.6 now
that 5.6 has been released.  It was not bumped to 5.7 because this
release has not yet been finalized and is still subject to change.

Added local 'struct zvol_state_os *zso' variable to zvol_alloc.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10181 
Closes #10187
2020-04-09 09:16:46 -07:00
Matthew Macy 01c4f2bf29
Use vn_io_fault_uiomove on FreeBSD to avoid potential deadlock
Added to prevent a possible deadlock, the following comments from
FreeBSD explain the issue.  The comment describing vn_io_fault_uiomove:

/*
 * Helper function to perform the requested uiomove operation using
 * the held pages for io->uio_iov[0].iov_base buffer instead of
 * copyin/copyout.  Access to the pages with uiomove_fromphys()
 * instead of iov_base prevents page faults that could occur due to
 * pmap_collect() invalidating the mapping created by
 * vm_fault_quick_hold_pages(), or pageout daemon, page laundry or
 * object cleanup revoking the write access from page mappings.
 *
 * Filesystems specified MNTK_NO_IOPF shall use vn_io_fault_uiomove()
 * instead of plain uiomove().
 */

This used for vn_io_fault which has the following motivation:

/*
 * The vn_io_fault() is a wrapper around vn_read() and vn_write() to
 * prevent the following deadlock:
 *
 * Assume that the thread A reads from the vnode vp1 into userspace
 * buffer buf1 backed by the pages of vnode vp2.  If a page in buf1 is
 * currently not resident, then system ends up with the call chain
 *   vn_read() -> VOP_READ(vp1) -> uiomove() -> [Page Fault] ->
 *     vm_fault(buf1) -> vnode_pager_getpages(vp2) -> VOP_GETPAGES(vp2)
 * which establishes lock order vp1->vn_lock, then vp2->vn_lock.
 * If, at the same time, thread B reads from vnode vp2 into buffer buf2
 * backed by the pages of vnode vp1, and some page in buf2 is not
 * resident, we get a reversed order vp2->vn_lock, then vp1->vn_lock.
 *
 * To prevent the lock order reversal and deadlock, vn_io_fault() does
 * not allow page faults to happen during VOP_READ() or VOP_WRITE().
 * Instead, it first tries to do the whole range i/o with pagefaults
 * disabled. If all pages in the i/o buffer are resident and mapped,
 * VOP will succeed (ignoring the genuine filesystem errors).
 * Otherwise, we get back EFAULT, and vn_io_fault() falls back to do
 * i/o in chunks, with all pages in the chunk prefaulted and held
 * using vm_fault_quick_hold_pages().
 *
 * Filesystems using this deadlock avoidance scheme should use the
 * array of the held pages from uio, saved in the curthread->td_ma,
 * instead of doing uiomove().  A helper function
 * vn_io_fault_uiomove() converts uiomove request into
 * uiomove_fromphys() over td_ma array.
 *
 * Since vnode locks do not cover the whole i/o anymore, rangelocks
 * make the current i/o request atomic with respect to other i/os and
 * truncations.
 */

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10177
2020-04-08 10:30:27 -07:00
Ryan Moeller 7e3df9db12
Finish refactoring for ZFS_MODULE_PARAM_CALL
Linux and FreeBSD have different parameters for tunable proc handler.
This has prevented FreeBSD from implementing the ZFS_MODULE_PARAM_CALL
macro.

To complete the sharing of ZFS_MODULE_PARAM_CALL declarations, create
per-platform definitions of the parameter list, ZFS_MODULE_PARAM_ARGS.

With the declarations wired up we discovered an incorrect scope prefix
for spa_slop_shift, so this is now fixed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10179
2020-04-07 10:06:22 -07:00
Paul Dagnelie 5a42ef04fd
Add 'zfs wait' command
Add a mechanism to wait for delete queue to drain.

When doing redacted send/recv, many workflows involve deleting files 
that contain sensitive data. Because of the way zfs handles file 
deletions, snapshots taken quickly after a rm operation can sometimes 
still contain the file in question, especially if the file is very 
large. This can result in issues for redacted send/recv users who 
expect the deleted files to be redacted in the send streams, and not 
appear in their clones.

This change duplicates much of the zpool wait related logic into a 
zfs wait command, which can be used to wait until the internal
deleteq has been drained.  Additional wait activities may be added 
in the future. 

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #9707
2020-04-01 10:02:06 -07:00
Fabio Scaccabarozzi c9e3efdb3a
Bugfix/fix uio partial copies
In zfs_write(), the loop continues to the next iteration without
accounting for partial copies occurring in uiomove_iov when 
copy_from_user/__copy_from_user_inatomic return a non-zero status.
This results in "zfs: accessing past end of object..." in the 
kernel log, and the write failing.

Account for partial copies and update uio struct before returning
EFAULT, leave a comment explaining the reason why this is done.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: ilbsmart <wgqimut@gmail.com>
Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com>
Closes #8673 
Closes #10148
2020-04-01 09:48:54 -07:00
Matthew Ahrens 0929c4de39
Improve ZVOL sync write performance by using a taskq
== Summary ==

Prior to this change, sync writes to a zvol are processed serially.
This commit makes zvols process concurrently outstanding sync writes in
parallel, similar to how reads and async writes are already handled.
The result is that the throughput of sync writes is tripled.

== Background ==

When a write comes in for a zvol (e.g. over iscsi), it is processed by
calling `zvol_request()` to initiate the operation.  ZFS is expected to
later call `BIO_END_IO()` when the operation completes (possibly from a
different thread).  There are a limited number of threads that are
available to call `zvol_request()` - one one per iscsi client (unless
using MC/S).  Therefore, to ensure good performance, the latency of
`zvol_request()` is important, so that many i/o operations to the zvol
can be processed concurrently.  In other words, if the client has
multiple outstanding requests to the zvol, the zvol should have multiple
outstanding requests to the storage hardware (i.e. issue multiple
concurrent `zio_t`'s).

For reads, and async writes (i.e. writes which can be acknowledged
before the data reaches stable storage), `zvol_request()` achieves low
latency by dispatching the bulk of the work (including waiting for i/o
to disk) to a taskq.  The taskq callback (`zvol_read()` or
`zvol_write()`) blocks while waiting for the i/o to disk to complete.
The `zvol_taskq` has 32 threads (by default), so we can have up to 32
concurrent i/os to disk in service of requests to zvols.

However, for sync writes (i.e. writes which must be persisted to stable
storage before they can be acknowledged, by calling `zil_commit()`),
`zvol_request()` does not use `zvol_taskq`.  Instead it blocks while
waiting for the ZIL write to disk to complete.  This has the effect of
serializing sync writes to each zvol.  In other words, each zvol will
only process one sync write at a time, waiting for it to be written to
the ZIL before accepting the next request.

The same issue applies to FLUSH operations, for which `zvol_request()`
calls `zil_commit()` directly.

== Description of change ==

This commit changes `zvol_request()` to use
`taskq_dispatch_ent(zvol_taskq)` for sync writes, and FLUSh operations.
Therefore we can have up to 32 threads (the taskq threads)
simultaneously calling `zil_commit()`, for a theoretical performance
improvement of up to 32x.

To avoid the locking issue described in the comment (which this commit
removes), we acquire the rangelock from the taskq callback (e.g.
`zvol_write()`) rather than from `zvol_request()`.  This applies to all
writes (sync and async), reads, and discard operations.  This means that
multiple simultaneously-outstanding i/o's which access the same block
can complete in any order.  This was previously thought to be incorrect,
but a review of the block device interface requirements revealed that
this is fine - the order is inherently not defined.  The shorter hold
time of the rangelock should also have a slight performance improvement.

For an additional slight performance improvement, we use
`taskq_dispatch_ent()` instead of `taskq_dispatch()`, which avoids a
`kmem_alloc()` and eliminates a failure mode.  This applies to all
writes (sync and async), reads, and discard operations.

== Performance results ==

We used a zvol as an iscsi target (server) for a Windows initiator
(client), with a single connection (the default - i.e. not MC/S).

We used `diskspd` to generate a workload with 4 threads, doing 1MB
writes to random offsets in the zvol.  Without this change we get
231MB/s, and with the change we get 728MB/s, which is 3.15x the original
performance.

We ran a real-world workload, restoring a MSSQL database, and saw
throughput 2.5x the original.

We saw more modest performance wins (typically 1.5x-2x) when using MC/S
with 4 connections, and with different number of client threads (1, 8,
32).

Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10163
2020-03-31 10:50:44 -07:00
George Amanakis 37c22948e5
Reset l2ad_hand and l2ad_first in l2arc_evict
Increasing l2arc_write_size or l2arc_write_boost can result in
l2arc_write_buffers() not having enough space to perform its writes and
panic zio_write_phys().

Instead of resetting l2ad_hand to l2ad_start at the end of
l2arc_write_buffers() and not taking into account a possible
user-mediated increase of l2arc_write_max, we do this in l2arc_evict(),
right after l2arc_write_size() has run. If there is not enough space to
evict (ie we will exceed l2ad_end) we evict to the end of the device,
reset l2ad_hand to l2ad_start, set l2ad_first to 0 and iterate
l2arc_evict(). We avoid infinite iteration of l2arc_evict() by making
sure in l2arc_write_size() that l2ad_start + size does not exceed
l2ad_end.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #10154
2020-03-31 10:46:48 -07:00
Ryan Moeller 9a51738b60
Let default arc_c_max be platform dependent
Linux changed the default max ARC size to 1/2 of physical memory to
deal with shortcomings of the Linux SLUB allocator.  Other platforms
do not require the same logic.

Implement an arc_default_max() function to determine a default max ARC
size in platform code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10155
2020-03-27 09:14:46 -07:00
Matthew Ahrens 3f38797338
Compile cityhash code into libzfs
Make the cityhash code compile into libzfs, in preparation for the new
"zstream" command.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10152
2020-03-27 09:11:22 -07:00
Dirkjan Bussink 112c1bff94
Remove checks for null out value in encryption paths
These paths are never exercised, as the parameters given are always
different cipher and plaintext `crypto_data_t` pointers.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fueloep <attila@fueloep.org>
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Closes #9661 
Closes #10015
2020-03-26 10:41:57 -07:00
Brian Behlendorf 5351951274
Fix zfs_rmnode() unlink / rollback issue
If a has rollback has occurred while a file is open and unlinked.
Then when the file is closed post rollback it will not exist in the
rolled back version of the unlinked object.  Therefore, the call to
zap_remove_int() may correctly return ENOENT and should be allowed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6812 
Closes #9739
2020-03-18 11:47:07 -07:00
Paul Dagnelie 7145123b0a
Separate warning for incomplete and corrupt streams
This change adds a separate return code to zfs_ioc_recv that is used 
for incomplete streams, in addition to the existing return code for 
streams that contain corruption.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #10122
2020-03-17 10:30:33 -07:00
Attila Fülöp 5b3b79559c
ICP: gcm-avx: Support architectures lacking the MOVBE instruction
There are a couple of x86_64 architectures which support all needed
features to make the accelerated GCM implementation work but the
MOVBE instruction. Those are mainly Intel Sandy- and Ivy-Bridge
and AMD Bulldozer, Piledriver, and Steamroller.

By using MOVBE only if available and replacing it with a MOV
followed by a BSWAP if not, those architectures now benefit from
the new GCM routines and performance is considerably better
compared to the original implementation.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam D. Moss <c@yotes.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Followup #9749 
Closes #10029
2020-03-17 10:24:38 -07:00
Matthew Ahrens 7261fc2e81
Improve zfs receive performance by batching writes
For each WRITE record in the stream, `zfs receive` creates a DMU
transaction (`dmu_tx_create()`) and writes this block's data into the
object.  If per-block overheads (as opposed to per-byte overheads)
dominate performance (as is often the case with small recordsize), the
per-dmu-transaction overheads can be significant.  For example, in some
workloads the `receieve_writer` thread is 100% on CPU, and more than
half of its CPU time is in these per-tx routines (e.g.
dmu_tx_hold_write, dmu_tx_assign, dmu_tx_commit).

To improve performance of `zfs receive`, this commit batches WRITE
records which are to nearby offsets of the same object, and uses one DMU
transaction to write them all.  By default the batch size is 1MB, which
for recordsize=8K reduces the number of DMU transactions by 128x for
full send streams (incrementals will depend on how "clumpy" the changed
blocks are).

This commit improves the performance of `dd if=stream | zfs recv`
from 78,800 blocks/sec to 98,100 blocks/sec (25% improvement).

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10099
2020-03-16 11:51:56 -07:00
Matthew Ahrens 0fdd6106bb
dmu_objset_from_ds must be called with dp_config_rwlock held
The normal lock order is that the dp_config_rwlock must be held before
the ds_opening_lock.  For example, dmu_objset_hold() does this.
However, dmu_objset_open_impl() is called with the ds_opening_lock held,
and if the dp_config_rwlock is not already held, it will attempt to
acquire it.  This may lead to deadlock, since the lock order is
reversed.

Looking at all the callers of dmu_objset_open_impl() (which is
principally the callers of dmu_objset_from_ds()), almost all callers
already have the dp_config_rwlock.  However, there are a few places in
the send and receive code paths that do not.  For example:
dsl_crypto_populate_key_nvlist, send_cb, dmu_recv_stream,
receive_write_byref, redact_traverse_thread.

This commit resolves the problem by requiring all callers ot
dmu_objset_from_ds() to hold the dp_config_rwlock.  In most cases, the
code has been restructured such that we call dmu_objset_from_ds()
earlier on in the send and receive processes, when we already have the
dp_config_rwlock, and save the objset_t until we need it in the middle
of the send or receive (similar to what we already do with the
dsl_dataset_t).  Thus we do not need to acquire the dp_config_rwlock in
many new places.

I also cleaned up code in dmu_redact_snap() and send_traverse_thread().

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #9662
Closes #10115
2020-03-12 10:55:02 -07:00
Alexander Motin fa130e010c
Fix infinite scan on a pool with only special allocations
Attempt to run scrub or resilver on a new pool containing only special
allocations (special vdev added on creation) caused infinite loop
because of dsl_scan_should_clear() limiting memory usage to 5% of pool
size, which it calculated accounting only normal allocation class.

Addition of special and just in case dedup classes fixes the issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #10106 
Closes #8694
2020-03-12 10:52:03 -07:00
John Poduska e6b28efccc
Prevent race condition in dnode_dest (#10101)
dnode_special_close() waits for the refcount of dn_holds to go to zero
without holding the dn_mtx. dnode_rele_and_unlock() does the final
remove to dn_holds with dn_mtx being held:

	refs = zfs_refcount_remove(&dn->dn_holds, tag);
	mutex_exit(&dn->dn_mtx);

So, there is a race condition after the remove until dn_mtx is
dropped. During that time, dnode_destroy() can get called, which ends
up in dnode_dest() calling mutex_destroy() and a panic since the lock
is still held.

This change adds a condvar to wait for the final dnode_rele_and_unlock()
to release the dn_mtx before calling dnode_destroy().

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: John Poduska <jpoduska@datto.com>
Closes #7814
Closes #10101
2020-03-12 10:25:56 -07:00
Mark Roper 1e9231ada8
Prevent deadlock in arc_read in Linux memory reclaim callback
Using zfs with Lustre, an arc_read can trigger kernel memory allocation
that in turn leads to a memory reclaim callback and a deadlock within a
single zfs process. This change uses spl_fstrans_mark and
spl_trans_unmark to prevent the reclaim attempt and the deadlock
(https://zfsonlinux.topicbox.com/groups/zfs-devel/T4db2c705ec1804ba).
The stack trace observed is:

    __schedule at ffffffff81610f2e
    schedule at ffffffff81611558
    schedule_preempt_disabled at ffffffff8161184a
    __mutex_lock at ffffffff816131e8
    arc_buf_destroy at ffffffffa0bf37d7 [zfs]
    dbuf_destroy at ffffffffa0bfa6fe [zfs]
    dbuf_evict_one at ffffffffa0bfaa96 [zfs]
    dbuf_rele_and_unlock at ffffffffa0bfa561 [zfs]
    dbuf_rele_and_unlock at ffffffffa0bfa32b [zfs]
    osd_object_delete at ffffffffa0b64ecc [osd_zfs]
    lu_object_free at ffffffffa06d6a74 [obdclass]
    lu_site_purge_objects at ffffffffa06d7fc1 [obdclass]
    lu_cache_shrink_scan at ffffffffa06d81b8 [obdclass]
    shrink_slab at ffffffff811ca9d8
    shrink_node at ffffffff811cfd94
    do_try_to_free_pages at ffffffff811cfe63
    try_to_free_pages at ffffffff811d01c4
    __alloc_pages_slowpath at ffffffff811be7f2
    __alloc_pages_nodemask at ffffffff811bf3ed
    new_slab at ffffffff81226304
    ___slab_alloc at ffffffff812272ab
    __slab_alloc at ffffffff8122740c
    kmem_cache_alloc at ffffffff81227578
    spl_kmem_cache_alloc at ffffffffa048a1fd [spl]
    arc_buf_alloc_impl at ffffffffa0befba2 [zfs]
    arc_read at ffffffffa0bf0924 [zfs]
    dbuf_read at ffffffffa0bf9083 [zfs]
    dmu_buf_hold_by_dnode at ffffffffa0c04869 [zfs]

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mark Roper <markroper@gmail.com>
Closes #9987
2020-03-12 10:24:43 -07:00
Matthew Ahrens 1dc32a67e9
Improve zfs send performance by bypassing the ARC
When doing a zfs send on a dataset with small recordsize (e.g. 8K),
performance is dominated by the per-block overheads.  This is especially
true with `zfs send --compressed`, which further reduces the amount of
data sent, for the same number of blocks.  Several threads are involved,
but the limiting factor is the `send_prefetch` thread, which is 100% on
CPU.

The main job of the `send_prefetch` thread is to issue zio's for the
data that will be needed by the main thread.  It does this by calling
`arc_read(ARC_FLAG_PREFETCH)`.  This has an immediate cost of creating
an arc_hdr, which takes around 14% of one CPU.  It also induces later
costs by other threads:

 * Since the data was only prefetched, dmu_send()->dmu_dump_write() will
   need to call arc_read() again to get the data.  This will have to
   look up the arc_hdr in the hash table and copy the data from the
   scatter ABD in the arc_hdr to a linear ABD in arc_buf.  This takes
   27% of one CPU.

 * dmu_dump_write() needs to arc_buf_destroy()  This takes 11% of one
   CPU.

 * arc_adjust() will need to evict this arc_hdr, taking about 50% of one
   CPU.

All of these costs can be avoided by bypassing the ARC if the data is
not already cached.  This commit changes `zfs send` to check for the
data in the ARC, and if it is not found then we directly call
`zio_read()`, reading the data into a linear ABD which is used by
dmu_dump_write() directly.

The performance improvement is best expressed in terms of how many
blocks can be processed by `zfs send` in one second.  This change
increases the metric by 50%, from ~100,000 to ~150,000.  When the amount
of data per block is small (e.g. 2KB), there is a corresponding
reduction in the elapsed time of `zfs send >/dev/null` (from 86 minutes
to 58 minutes in this test case).

In addition to improving the performance of `zfs send`, this change
makes `zfs send` not pollute the ARC cache.  In most cases the data will
not be reused, so this allows us to keep caching useful data in the MRU
(hit-once) part of the ARC.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10067
2020-03-10 10:51:04 -07:00
Ryan Moeller f5f6fb03b7
Change default to overlay=on
Filesystems allow overlay mounts by default on FreeBSD and Linux.

Respect the native convention by switching the default to overlay=on,
while retaining the option to turn the property off for compatibility
with other operating systems' conventions.

Update documentation and tests accordingly.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10030
2020-03-06 09:28:19 -08:00
Brian Behlendorf f49db9b504
zio: dprintf_bp() if errors > 0 in zfs_blkptr_verify()
Also dprintf_bp() in case BLK_VERIFY_HALT of zfs_blkptr_verify_log()
since dprintf_bp() in zfs_blkptr_verify() will never be executed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Justin Keogh <commits@v6y.net>
Closes #10086
2020-03-04 15:08:41 -08:00
Brian Behlendorf 2288d41968
Add trim support to zpool wait
Manual trims fall into the category of long-running pool activities
which people might want to wait synchronously for. This change adds
support to 'zpool wait' for waiting for manual trim operations to
complete. It also adds a '-w' flag to 'zpool trim' which can be used to
turn 'zpool trim' into a synchronous operation.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #10071
2020-03-04 15:07:11 -08:00
Matthew Ahrens b3212d2fa6
Improve performance of zio_taskq_member
__zio_execute() calls zio_taskq_member() to determine if we are running
in a zio interrupt taskq, in which case we may need to switch to
processing this zio in a zio issue taskq.  The call to
zio_taskq_member() can become a performance bottleneck when we are
processing a high rate of zio's.

zio_taskq_member() calls taskq_member() on each of the zio interrupt
taskqs, of which there are 21.  This is slow because each call to
taskq_member() does tsd_get(taskq_tsd), which on Linux is relatively
slow.

This commit improves the performance of zio_taskq_member() by having it
cache the value of tsd_get(taskq_tsd), reducing the number of those
calls to 1/21th of the current behavior.

In a test case running `zfs send -c >/dev/null` of a filesystem with
small blocks (average 2.5KB/block), zio_taskq_member() was using 6.7% of
one CPU, and with this change it is reduced to 1.3%.  Overall time to
perform the `zfs send` reduced by 10% (~150,000 block/sec to ~165,000
blocks/sec).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10070
2020-03-03 10:29:38 -08:00
Ryan Moeller 9bb907bc3f
Make spa_history_zone platform-dependent in kernel
This function should only return "linux" on Linux.

Move the kernel part of the function out of common code.
Fix the tests for FreeBSD.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10079
2020-03-02 09:43:30 -08:00
Matthew Macy cf118ae8dc
Don't call zrele on passed zp in zfs_xattr_owner_unlinked on FreeBSD
FreeBSD has a somewhat more cumbersome locking and refcounting
protocol for the platform counterpart to znode. We need to not call
zrele on the passed zp, but do need to do so on any intermediate zp.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10075
2020-02-28 14:53:18 -08:00
Matthew Macy ae9f92f6f3
Re-share zfsdev_getminor and zfs_onexit_fd_hold
By adding a zfs_file_private accessor to the common
interfaces and some extensions to FreeBSD platform
code it is now possible to share the implementations
for the aforementioned functions.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10073
2020-02-28 14:50:32 -08:00
Matthew Ahrens 9cdf7b1f6b
Improve zfs destroy performance with zio_t-free zio_free()
When "zfs destroy" is run, it completes quickly, and in the background
we locate the blocks to free and free them.  This background activity
can be observed with `zpool get freeing` and `zpool wait -t free ...`.

This background activity is processed by a single thread (the spa_sync
thread) which calls zio_free() on each of the blocks to free.  With even
modest storage performance, the CPU consumption of zio_free() can be the
performance bottleneck.

Performance of zio_free() can be improved by not actually creating a
zio_t in the common case (non-dedup, non-gang), instead calling
metaslab_free() directly.  This avoids the CPU cost of allocating the
zio_t, and more importantly the cost of adding and later removing this
zio_t from the parent zio's child list.

The result is that performance of background freeing more than doubles,
from 0.6 million blocks per second to 1.3 million blocks per second.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10034
2020-02-28 14:49:44 -08:00
Brian Behlendorf bd0d24e09b
Linux 5.5 compat: blkg_tryget()
Commit https://github.com/torvalds/linux/commit/9e8d42a0f accidentally
converted the static inline function blkg_tryget() to GPL-only for
kernels built with CONFIG_PREEMPT_RCU=y and CONFIG_BLK_CGROUP=y.

Resolve the build issue by providing our own equivalent functionality
when needed which uses rcu_read_lock_sched() internally as before.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9745
Closes #10072
2020-02-28 08:58:39 -08:00
Matthew Macy 13fac09868
Consolidate arc_buf allocation checks
The following check currently occurs in three separate locations
in dbuf.c.  This change consolidates those checks in to the
dbuf_alloc_arcbuf_from_arcbuf() function.

if (arc_is_encrypted(data)) {
...
} else if (compress_type != ZIO_COMPRESS_OFF) {
...
} else {
...
}

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10057
2020-02-27 17:12:44 -08:00
Brian Behlendorf 2c3a83701d Linux 5.6 compat: time_t
As part of the Linux kernel's y2038 changes the time_t type has been
fully retired.  Callers are now required to use the time64_t type.

Rather than move to the new type, I've removed the few remaining
places where a time_t is used in the kernel code.  They've been
replaced with a uint64_t which is already how ZFS internally
handled these values.

Going forward we should work towards updating the remaining user
space time_t consumers to the 64-bit interfaces.

Reviewed-by: Matthew Macy <mmacy@freebsd.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10052
Closes #10064
2020-02-27 09:31:02 -08:00
Matthew Macy 28caa74b19
Refactor dnode dirty context from dbuf_dirty
* Add dedicated donde_set_dirtyctx routine.
* Add empty dirty record on destroy assertion.
* Make much more extensive use of the SET_ERROR macro.

Reviewed-by: Will Andrews <wca@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9924
2020-02-26 16:09:17 -08:00
Matthew Macy c6a6b4d50a
Remove dead code error handling from dsl_crypt.c
Sleepable (KM_SLEEP) allocations cannot fail. Hence
error handling for them is not useful.

Reviewed-By: Tom Caputi <tcaputi@datto.com>
Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10031
2020-02-25 15:59:29 -08:00
Dirkjan Bussink 327000ce04
Remove zfs_getattr and convoff dead code
The `convoff` function is called only in one code path in `zfs_space`.
Each caller of `zfs_space` is called with a `flock64_t` that has
`l_whence` set to `SEEK_SET`. This means that `convoff` always results
in a no-op as the `bfp` parameter has `l_whence` set to `SEEK_SET` and
`int whence` is `SEEK_SET` as well.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by:  Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Closes #10006
2020-02-24 15:38:22 -08:00
Matthew Ahrens 31a69fbccb
Remove unused structs and members in dmu_send.c
There are several structs (and members of structs) related to redaction,
which are no longer used.  This commit removes them.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10039
2020-02-24 09:50:14 -08:00
Arvind Sankar 65635c3403
Fix icp include directories for in-tree build
When zfs is built in-tree using --enable-linux-builtin, the compile
commands are executed from the kernel build directory. If the build
directory is different from the kernel source directory, passing
-Ifs/zfs/icp will not find the headers as they are not present in the
build directory.

Fix this by adding @abs_top_srcdir@ to pull the headers from the zfs
source tree instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10021
2020-02-20 08:10:47 -08:00
Ryan Moeller 5f087dda78
Enable zpool events tunables and tests on FreeBSD
We have have made the necessary changes in our module code to expose
zevents through both devd and the zpool events ioctl. Now the tunables
can be exposed and zpool events tests can be enabled on both platforms.

A few minor tweaks to the tests were needed to accommodate the way wc
formats output on FreeBSD.

zed remains to be ported.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10008
2020-02-18 11:22:56 -08:00
Matthew Macy 8b3547a481
Factor out some dbuf subroutines and add state change tracing
Create dedicated dbuf_read_hole and dbuf_read_bonus.
Additionally, add a dtrace probe to allow state change tracing.

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Will Andrews <wca@FreeBSD.org>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Authored-by: Will Andrews <wca@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9923
2020-02-18 11:21:37 -08:00
Richard Laager f244846462
Prefer org.openzfs for features and properties
Moving forward, we wish to use org.openzfs (no dash) rather than
org.open-zfs or org.zfsonlinux for feature GUIDs and property names.
The existing feature GUIDs cannot be changed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #10003
2020-02-18 09:36:50 -08:00
DeHackEd d09dc5980c
Honour sync=disabled when relinking tpmfiles
Unlinked files don't respect synchronous flush commands, but when they get relinked
their state is unknown. Previously we force flushed all such files even when
sync=disabled. Correct this case.

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: DHE <git@dehacked.net>
Closes #10005
2020-02-16 12:44:08 -08:00
Jason King 13b5a4d5c0
Support setting user properties in a channel program
This adds support for setting user properties in a
zfs channel program by adding 'zfs.sync.set_prop'
and 'zfs.check.set_prop' to the ZFS LUA API.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Co-authored-by: Sara Hartse <sara.hartse@delphix.com>
Contributions-by: Jason King <jason.king@joyent.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Jason King <jason.king@joyent.com>
Closes #9950
2020-02-14 13:41:42 -08:00
Matthew Ahrens 4fe3a842bb
Remove limit on number of async zio_frees of non-dedup blocks
The module parameter zfs_async_block_max_blocks limits the number of
blocks that can be freed by the background freeing of filesystems and
snapshots (from "zfs destroy"), in one TXG.  This is useful when freeing
dedup blocks, becuase each zio_free() of a dedup block can require an
i/o to read the relevant part of the dedup table (DDT), and will also
dirty that block.

zfs_async_block_max_blocks is set to 100,000 by default.  For the more
typical case where dedup is not used, this can have a negative
performance impact on the rate of background freeing (from "zfs
destroy").  For example, with recordsize=8k, and TXG's syncing once
every 5 seconds, we can free only 160MB of data per second, which may be
much less than the rate we can write data.

This change increases zfs_async_block_max_blocks to be unlimited by
default.  To address the dedup freeing issue, a new tunable is
introduced, zfs_max_async_dedup_frees, which limits the number of
zio_free()'s of dedup blocks done by background destroys, per txg.  The
default is 100,000 free's (same as the old zfs_async_block_max_blocks
default).

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10000
2020-02-14 08:39:46 -08:00
Matthew Ahrens 2adc6b35ae
Missed wakeup when growing kmem cache
When growing the size of a (VMEM or KVMEM) kmem cache, spl_cache_grow()
always does taskq_dispatch(spl_cache_grow_work), and then waits for the
KMC_BIT_GROWING to be cleared by the taskq thread.

The taskq thread (spl_cache_grow_work()) does:
1. allocate new slab and add to list
2. wake_up_all(skc_waitq)
3. clear_bit(KMC_BIT_GROWING)

Therefore, the waiting thread can wake up before GROWING has been
cleared.  It will see that the growing has not yet completed, and go
back to sleep until it hits the 100ms timeout.

This can have an extreme performance impact on workloads that alloc/free
more than fits in the (statically-sized) magazines.  These workloads
allocate and free slabs with high frequency.

The problem can be observed with `funclatency spl_cache_grow`, which on
some workloads shows that 99.5% of the time it takes <64us to allocate
slabs, but we spend ~70% of our time in outliers, waiting for the 100ms
timeout.

The fix is to do `clear_bit(KMC_BIT_GROWING)` before
`wake_up_all(skc_waitq)`.

A future investigation should evaluate if we still actually need to
taskq_dispatch() at all, and if so on which kernel versions.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #9989
2020-02-13 11:23:02 -08:00
Alexander Motin 465e4e795e
Remove duplicate dbufs accounting
Since AVL already has embedded element counter, use dn_dbufs_count
only for dbufs not counted there (bonus buffers) and just add them.
This removes two atomics per dbuf life cycle.

According to profiler it reduces time spent by dbuf_destroy() inside
bottlenecked dbuf_evict_thread() from 13.36% to 9.20% of the core.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #9949
2020-02-13 11:20:42 -08:00
Christian Schwarz 948f0c4419 zcp: add zfs.sync.bookmark
Add support for bookmark creation and cloning.

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9571
2020-02-11 13:19:17 -08:00
Christian Schwarz a73f361fdb Implement bookmark copying
This feature allows copying existing bookmarks using

    zfs bookmark fs#target fs#newbookmark

There are some niche use cases for such functionality,
e.g. when using bookmarks as markers for replication progress.

Copying redaction bookmarks produces a normal bookmark that
cannot be used for redacted send (we are not duplicating
the redaction object).

ZCP support for bookmarking (both creation and copying) will be
implemented in a separate patch based on this work.

Overview:

- Terminology:
    - source = existing snapshot or bookmark
    - new/bmark = new bookmark
- Implement bookmark copying in `dsl_bookmark.c`
  - create new bookmark node
  - copy source's `zbn_phys` to new's `zbn_phys`
  - zero-out redaction object id in copy
- Extend existing bookmark ioctl nvlist schema to accept
  bookmarks as sources
  - => `dsl_bookmark_create_nvl_validate` is authoritative
- use `dsl_dataset_is_before` check for both snapshot
  and bookmark sources
- Adjust CLI
  - refactor shortname expansion logic in `zfs_do_bookmark`
- Update man pages
  - warn about redaction bookmark handling
- Add test cases
  - CLI
  - pyyzfs libzfs_core bindings

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9571
2020-02-11 13:19:12 -08:00
Matthew Macy 7b49bbc816
Address Coverity warnings in #9902
Coverity reports the variable may be NULL, but due to the
way the dirty records are handled this cannot be the case.
Add a comment and VERIFY to make this clear and silence
the warning.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9962
2020-02-11 13:12:41 -08:00
Brian Behlendorf dceeca5bbd
Add missing dmu_buf_unlock_parent() calls to dbuf_read_impl()
As explained by the comment in dbuf_read() and above dbuf_read_impl().
Under all circumstances the parent lock specified by dblt should be
dropped when existing dbuf_read_impl().  This was not being done for
two exist paths.  Additionally, ensure the mutex is unlocked before
dropping the parent lock.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9968
2020-02-10 14:54:12 -08:00
Paul Zuchowski bc67cba7c0
Fix zdb -R with 'b' flag
zdb -R :b fails due to the indirect block being compressed,
and the 'b' and 'd' flag not working in tandem when specified.
Fix the flag parsing code and create a zfs test for zdb -R
block display.  Also fix the zio flags where the dotted notation
for the vdev portion of DVA (i.e. 0.0:offset:length) fails.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #9640
Closes #9729
2020-02-10 14:00:05 -08:00
Ryan Moeller 57940b435c
Share some code for spa deadman tunables
We need to do the same thing to update all spas on any OS for these
tunables, so let's share the code.

While here let's match the types of the literals initializing the
variables with the type of the variable.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9964
2020-02-10 13:11:30 -08:00
Attila Fülöp 31b160f0a6
ICP: Improve AES-GCM performance
Currently SIMD accelerated AES-GCM performance is limited by two
factors:

a. The need to disable preemption and interrupts and save the FPU
state before using it and to do the reverse when done. Due to the
way the code is organized (see (b) below) we have to pay this price
twice for each 16 byte GCM block processed.

b. Most processing is done in C, operating on single GCM blocks.
The use of SIMD instructions is limited to the AES encryption of the
counter block (AES-NI) and the Galois multiplication (PCLMULQDQ).
This leads to the FPU not being fully utilized for crypto
operations.

To solve (a) we do crypto processing in larger chunks while owning
the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced
to make this chunk size tweakable. It defaults to 32 KiB. This step
alone roughly doubles performance. (b) is tackled by porting and
using the highly optimized openssl AES-GCM assembler routines, which
do all the processing (CTR, AES, GMULT) in a single routine. Both
steps together result in up to 32x reduction of the time spend in
the en/decryption routines, leading up to approximately 12x
throughput increase for large (128 KiB) blocks.

Lastly, this commit changes the default encryption algorithm from
AES-CCM to AES-GCM when setting the `encryption=on` property.

Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-By: Jason King <jason.king@joyent.com>
Reviewed-By: Tom Caputi <tcaputi@datto.com>
Reviewed-By: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #9749
2020-02-10 12:59:50 -08:00
Matthew Macy fa3922df75
Factor out dbuf_sync_bonus
Factor the portion of dbuf_sync_leaf() responsible for handling bonus
buffers out in to its own dbuf_sync_bonus() helper function.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9909
2020-02-07 14:22:29 -08:00
Brian Behlendorf 795699a6cc Linux 5.6 compat: timestamp_truncate()
The timestamp_truncate() function was added, it replaces the existing
timespec64_trunc() function.  This change renames our wrapper function
to be consistent with the upstream name and updates the compatibility
code for older kernels accordingly.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9956
Closes #9961
2020-02-07 11:04:32 -08:00
Brian Behlendorf 0dd7364853 Linux 5.6 compat: struct proc_ops
The proc_ops structure was introduced to replace the use of of the
file_operations structure when registering proc handlers.  This
change creates a new kstat_proc_op_t typedef for compatibility
which can be used to pass around the correct structure.

This change additionally adds the 'const' keyword to all of the
existing proc operations structures.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9961
2020-02-07 11:03:53 -08:00
Alexander Motin e0ce98d57c
Reduce number of atomic_add() calls in aggsum
Previous code used 4 atomics to do aggsum_flush_bucket() and 2 more to
re-borrow after the flush.  But since asc_borrowed and asc_delta are
accessed only while holding asc_lock, it makes no any sense to modify
as_lower_bound and as_upper_bound in multiple steps.  Instead of that
the new code uses only 2 atomics in all the cases, one per as_*_bound
variable.  I think even that is overkill, simple atomic store and
load could be used here, since all modifications are done under the
as_lock, but there are no such primitives in ZFS code now.

While there, make borrow code consider previous borrow value, so that
on mixed request patterns reduce chance of needing to borrow again if
much larger request follows tiny one that needed borrow.

Also reduce as_numbuckets from uint64_t to u_int.  It makes no sense
to use so large division operation on every aggsum_add().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #9930
2020-02-06 13:21:06 -08:00
Romain Dolbeau 77122f9d68
Replace static per-cpu with dynamic per-cpu data
This solves the issue of loading the spl module on RISC-V.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes #9942
2020-02-06 09:26:13 -08:00
Alexander Motin cbd8f5b759
Few microoptimizations to dbuf layer
Move db_link into the same cache line as db_blkid and db_level.
It allows significantly reduce avl_add() time in dbuf_create() on
systems with large RAM and huge number of dbufs per dnode.

Avoid few accesses to dbuf_caches[].size, which is highly congested
under high IOPS and never stays in cache for a long time.  Use local
value we are receiving from zfs_refcount_add_many() any way.

Remove cache_size_bytes_max bump from dbuf_evict_one().  I don't see
a point to do it on dbuf eviction after we done it on insertion in
dbuf_rele_and_unlock().

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #9931
2020-02-05 11:08:44 -08:00
Matthew Macy cccbed9f98
Convert dbuf dirty record record list to a list_t
Additionally pull in state machine comments about
upcoming async cow work.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9902
2020-02-05 11:07:19 -08:00
Alexander Motin 741db5a346
Prepare ks_data before calling kstat_install()
It violated sequence described in kstat.h, and at least on FreeBSD
kstat_install() uses provided names to create the sysctls.  If the
names are not available at the time, it ends up bad.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #9933
2020-02-04 08:49:12 -08:00
Ryan Moeller 8c4987c489
Restore aclmode and remove acltype on FreeBSD
This replaces the placeholder ZFS_PROP_PRIVATE with ZFS_PROP_ACLMODE,
matching what is done in the NFSv4 ACLs PR (#9709).

On FreeBSD we hide ZFS_PROP_ACLTYPE, while on Linux we hide
ZFS_PROP_ACLMODE.

The tests already assume this arrangement.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9913
2020-02-04 08:40:07 -08:00
Ryan Moeller 07bc2bc231
Fix const-correctness in raidz math
Clang warns (errors) that "cast from 'const void *' to 'struct v *'
drops const qualifier."

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9917
2020-02-03 10:52:41 -08:00
Matthew Ahrens ec21397127
async zvol minor node creation interferes with receive
When we finish a zfs receive, dmu_recv_end_sync() calls
zvol_create_minors(async=TRUE).  This kicks off some other threads that
create the minor device nodes (in /dev/zvol/poolname/...).  These async
threads call zvol_prefetch_minors_impl() and zvol_create_minor(), which
both call dmu_objset_own(), which puts a "long hold" on the dataset.
Since the zvol minor node creation is asynchronous, this can happen
after the `ZFS_IOC_RECV[_NEW]` ioctl and `zfs receive` process have
completed.

After the first receive ioctl has completed, userland may attempt to do
another receive into the same dataset (e.g. the next incremental
stream).  This second receive and the asynchronous minor node creation
can interfere with one another in several different ways, because they
both require exclusive access to the dataset:

1. When the second receive is finishing up, dmu_recv_end_check() does
dsl_dataset_handoff_check(), which can fail with EBUSY if the async
minor node creation already has a "long hold" on this dataset.  This
causes the 2nd receive to fail.

2. The async udev rule can fail if zvol_id and/or systemd-udevd try to
open the device while the the second receive's async attempt at minor
node creation owns the dataset (via zvol_prefetch_minors_impl).  This
causes the minor node (/dev/zd*) to exist, but the udev-generated
/dev/zvol/... to not exist.

3. The async minor node creation can silently fail with EBUSY if the
first receive's zvol_create_minor() trys to own the dataset while the
second receive's zvol_prefetch_minors_impl already owns the dataset.

To address these problems, this change synchronously creates the minor
node.  To avoid the lock ordering problems that the asynchrony was
introduced to fix (see #3681), we create the minor nodes from open
context, with no locks held, rather than from syncing contex as was
originally done.

Implementation notes:

We generally do not need to traverse children or prefetch anything (e.g.
when running the recv, snapshot, create, or clone subcommands of zfs).
We only need recursion when importing/opening a pool and when loading
encryption keys.  The existing recursive, asynchronous, prefetching code
is preserved for use in these cases.

Channel programs may need to create zvol minor nodes, when creating a
snapshot of a zvol with the snapdev property set.  We figure out what
snapshots are created when running the LUA program in syncing context.
In this case we need to remember what snapshots were created, and then
try to create their minor nodes from open context, after the LUA code
has completed.

There are additional zvol use cases that asynchronously own the dataset,
which can cause similar problems.  E.g. changing the volmode or snapdev
properties.  These are less problematic because they are not recursive
and don't touch datasets that are not involved in the operation, there
is still potential for interference with subsequent operations.  In the
future, these cases should be similarly converted to create the zvol
minor node synchronously from open context.

The async tasks of removing and renaming minors do not own the objset,
so they do not have this problem.  However, it may make sense to also
convert these operations to happen synchronously from open context, in
the future.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-65948
Closes #7863
Closes #9885
2020-02-03 09:33:14 -08:00
Ryan Moeller fe7c15985b
Left-align index props
Index type props display as strings, which should be aligned to the
left not to the right.

Before:
```
FreeBSD-13_0-CURRENT-r356528 ➜  ~ zfs list -ro name,aclmode,mountpoint
NAME        ACLMODE  MOUNTPOINT
p0      passthrough  /p0
p0/foo      discard  /p0/foo
```

After:
```
FreeBSD-13_0-CURRENT-r356528 ➜  ~ zfs list -ro name,aclmode,mountpoint
NAME    ACLMODE      MOUNTPOINT
p0      passthrough  /p0
p0/foo  discard      /p0/foo
```

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9912
2020-01-31 08:55:51 -08:00
Christian Schwarz 20ea8540a6 dsl_bookmark_create_check: fix NULL pointer deref if dbca_errors == NULL
Discovered in preparation of zcp support for creating bookmarks.
Handle the case where dbca_errors is NULL.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9880
2020-01-23 21:13:42 -08:00
Christian Schwarz 3aea3c9d54 entity_namecheck: doc comment: include space as allowed character
The helper function valid_char already allows it but
the doc comment was out of date.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9879
2020-01-23 21:11:54 -08:00
Romain Dolbeau 35b07497c6 Add AltiVec RAID-Z
Implements the RAID-Z function using AltiVec SIMD.
This is basically the NEON code translated to AltiVec.

Note that the 'fletcher' algorithm requires 64-bits
operations, and the initial implementations of AltiVec
(PPC74xx a.k.a. G4, PPC970 a.k.a. G5) only has up to
32-bits operations, so no 'fletcher'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes #9539
2020-01-23 11:01:24 -08:00
Christian Schwarz 0ea03c7c82 dmu_send: redacted: fix memory leak on invalid redaction/from bookmark
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9867
2020-01-23 09:34:31 -08:00
Matthew Macy 3d91490f7c Simplify FreeBSD's locking requirements in zfs_replay.c
Now that the FreeBSD zfs_vnops code avoids asserting that
a vnode lock is held when z_replay is true we can limit
the FreeBSD specific changes to the couple of changes
where it is necessary to drop the vnode locks because
a function returns with it held.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9865
2020-01-22 17:55:56 -08:00
Jason King e2ef1cbf04 Support inheriting properties in channel programs
This adds support in channel programs to inherit properties analogous
to `zfs inherit` by adding `zfs.sync.inherit` and `zfs.check.inherit`
functions to the ZFS LUA API.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason King <jason.king@joyent.com>
Closes #9738
2020-01-22 17:03:17 -08:00
Matthew Macy af26a86958 Update tunable macro usage for disable_ivset_guid_check
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9861
2020-01-21 15:05:23 -08:00
Matthew Macy d3c1e45b7a Re-consolidate zio_delay_interrupt
With recent SPL changes there is no longer any need for a per
platform version.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9860
2020-01-21 15:04:13 -08:00
Brian Behlendorf 70835c5b75
Unify target_cpu handling
Over the years several slightly different approaches were used
in the Makefiles to determine the target architecture.  This
change updates both the build system and Makefile to handle
this in a consistent fashion.

TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64
and made available in the Makefiles to be used as appropriate.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9848
2020-01-17 12:40:09 -08:00
Tom Caputi 61152d1069 Fix errata #4 handling for resuming streams
Currently, the handling for errata #4 has two issues which allow
the checks for this issue to be bypassed using resumable sends.
The first issue is that drc->drc_fromsnapobj is not set in the
resuming code as it is in the non-resuming code. This causes
dsl_crypto_recv_key_check() to skip its checks for the
from_ivset_guid. The second issue is that resumable sends do not
clean up their on-disk state if they fail the checks in
dmu_recv_stream() that happen before any data is received.

As a result of these two bugs, a user can attempt a resumable send
of a dataset without a from_ivset_guid. This will fail the initial
dmu_recv_stream() checks, leaving a valid resume state. The send
can then be resumed, which skips those checks, allowing the receive
to be completed.

This commit fixes these issues by setting drc->drc_fromsnapobj in
the resuming receive path and by ensuring that resumablereceives
are properly cleaned up if they fail the initial dmu_recv_stream()
checks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9818 
Closes #9829
2020-01-14 12:25:20 -08:00
loli10K 7e2da7786e KMC_KVMEM disrupts kv_alloc() memory alignment expectations
On kernels with KASAN enabled the following failure can be observed as
soon as the zfs module is loaded:

  VERIFY(IS_P2ALIGNED(ptr, PAGE_SIZE)) failed
  PANIC at spl-kmem-cache.c:228:kv_alloc()

The problem is kmalloc() has never guaranteed aligned allocations; this
requirement resulted in zfsonlinux/spl@8b45dda which removed all
kmalloc() usage in kv_alloc().

Until a GFP_ALIGNED flag (or equivalent functionality) is provided by
the kernel this commit partially reverts 66955885 and 6d948c35 to
prevent k(v)malloc() allocations in kv_alloc().

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9813
2020-01-14 09:09:59 -08:00
Brian Behlendorf e458fcca75
Change http://zfsonlinux.org links to https://zfsonlinux.org
Update the project website links contained in to repository to
reference the secure https://zfsonlinux.org address.

Reviewed-By: Richard Laager <rlaager@wiktel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9837
2020-01-13 16:43:59 -08:00
Tom Caputi ba0ba69e50 Add 'zfs send --saved' flag
This commit adds the --saved (-S) to the 'zfs send' command.
This flag allows a user to send a partially received dataset,
which can be useful when migrating a backup server to new
hardware. This flag is compatible with resumable receives, so
even if the saved send is interrupted, it can be resumed.
The flag does not require any user / kernel ABI changes or any
new feature flags in the send stream format.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Christian Schwarz <me@cschwarz.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9007
2020-01-10 10:16:58 -08:00
loli10K c24fa4b19a Fix "zpool add -n" for dedup, special and log devices
For dedup, special and log devices "zpool add -n" does not print
correctly their vdev type:

~# zpool add -n pool dedup /tmp/dedup special /tmp/special log /tmp/log
would update 'pool' to the following configuration:
	pool
	  /tmp/normal
	  /tmp/dedup
	  /tmp/special
	  /tmp/log

This could lead storage administrators to modify their ZFS pools to
unexpected and unintended vdev configurations.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9783 
Closes #9390
2020-01-06 15:40:06 -08:00
Brian Behlendorf bc9cef11fd
Fix QAT allocation failure return value
When qat_compress() fails to allocate the required contiguous memory
it mistakenly returns success.  This prevents the fallback software
compression from taking over and (un)compressing the block.

Resolve the issue by correctly setting the local 'status' variable
on all exit paths.  Furthermore, initialize it to CPA_STATUS_FAIL
to ensure qat_compress() always fails safe to guard against any
similar bugs in the future.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9784
Closes #9788
2020-01-06 11:17:53 -08:00
Brian Behlendorf cc618d179e
Static symbols exported by ICP
The crypto_cipher_init_prov and crypto_cipher_init are declared static
and should not be exported by the ICP.  This resolves the following
warnings observed when building with the 5.4 kernel.

WARNING: "crypto_cipher_init" [.../icp] is a static EXPORT_SYMBOL
WARNING: "crypto_cipher_init_prov" [.../icp] is a static EXPORT_SYMBOL

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9791
2020-01-02 18:08:45 -08:00
Steve Mokris d5c97f3de7 Avoid some crashes when importing a pool with corrupt metadata
- Skip invalid DVAs when importing pools in readonly mode
  (in addition to when the config is untrusted).

- Upon encountering a DVA with a null VDEV, fail gracefully
  instead of panicking with a NULL pointer dereference.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Steve Mokris <smokris@softpixel.com>
Closes #9022
2019-12-26 10:57:05 -08:00
Brian Behlendorf 635a01aafd
Cancel initialize and TRIM before vdev_metaslab_fini()
Any running 'zpool initialize' or TRIM must be cancelled prior
to the vdev_metaslab_fini() call in spa_vdev_remove_log() which
will unload the metaslabs and set ms->ms_group == NULL.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8602
Closes #9751
2019-12-26 10:50:23 -08:00
Brian Behlendorf d16a207f2e cppcheck: (warning) Possible null pointer dereference: nvh
Move the 'nvh = (void *)buf' assignment after the 'buf == NULL'
check to resolve the warning.  Interestingly, cppcheck 1.88
correctly determines that the existing code is safe, while
cppcheck 1.86 reports the warning.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:25:57 -08:00
Brian Behlendorf 487bddad67 cppcheck: (error) Address of local auto-variable assigned
Suppress autoVariables warnings in the lua interpreter.  The usage
here while unconventional in intentional and the same as upstream.

[module/lua/ldebug.c:327]: (error) Address of local auto-variable
    assigned to a function parameter.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:25:42 -08:00
Brian Behlendorf 070402f112 cppcheck: (warning) Possible null pointer dereference: dnp
The dnp argument can only be set to NULL when the DNODE_DRY_RUN flag
is set.  In which case, an early return path will be executed and a
NULL pointer dereference at the given location is impossible.  Add
an additional ASSERT to silence the cppcheck warning and document
that dbp must never be NULL at the point in the function.

[module/zfs/dnode.c:1566]: (warning) Possible null pointer deref: dnp

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:25:13 -08:00
Ubuntu abfdb83607 cppcheck: (error) Shifting signed 64-bit value by 63 bits
As of cppcheck 1.82 surpress the warning regarding shifting too many
bits for __divdi3() implemention.  The algorithm used here is correct.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:24:42 -08:00
Ubuntu 7cf1fe6331 cppcheck: (error) Uninitialized variable
As of cppcheck 1.82 warnings are issued when using the list_for_each_*
functions with an uninitialized variable.  Functionally, this is fine
but to resolve the warning initialize these variables.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:24:29 -08:00
Ubuntu 5215fdd43c cppcheck: (error) Uninitialized variable
Resolve the following uninitialized variable warnings.  In practice
these were unreachable due to the goto.  Replacing the goto with a
return resolves the warning and yields more readable code.

[module/icp/algs/modes/ccm.c:892]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/ccm.c:893]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/gcm.c:564]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:565]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:599]: (error) Uninitialized variable: gmac_param
[module/icp/algs/modes/gcm.c:600]: (error) Uninitialized variable: gmac_param

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:23:54 -08:00
Romain Dolbeau 118fc3ef07 Minor performance fix for NEON RAID-Z
The NEON code replicates too closely the SSE code, including
a masked 16-bits shift. But NEON, like AltiVec (#9539), has
unsigned 8-bits shift, so use that instead and drop the masking.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes #9725
2019-12-17 19:34:52 -08:00
Matthew Macy ba434b18ec Fix zfs_xattr_owner_unlinked on FreeBSD and comment
Explain FreeBSD VFS' unfortunate idiosyncratic locking requirements.
There is no functional change for other platforms.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9720
2019-12-16 09:49:05 -08:00
Tomohiro Kusumi ddb4e69db5 Don't fail to apply umask for O_TMPFILE files
Apply umask to `mode` which will eventually be applied to inode.
This is needed since VFS doesn't apply umask for O_TMPFILE files.

(Note that zpl_init_acl() applies `ip->i_mode &= ~current_umask();`
only when POSIX ACL is used.)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes #8997 
Closes #8998
2019-12-13 15:02:23 -08:00
Tom Caputi c317c8c811 Allow empty ds_props_obj to be destroyed
Currently, 'zfs list' and 'zfs get' commands can be slow when
working with snapshots that have a ds_props_obj. This is
because the code that discovers all of the properties for these
snapshots needs to read this object for each snapshot, which
almost always ends up causing an extra random synchronous read
for each snapshot. This performance penalty exists even if the
properties on that snapshot have been unset because the object
is normally only freed when the snapshot is freed, even though
it is only created when it is needed.

This patch allows the user to regain 'zfs list' performance on
these snapshots by destroying the ds_props_obj when it no longer
has any entries left. In practice on a production machine, this
optimization seems to make 'zfs list' about 55% faster.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9704
2019-12-13 11:51:39 -08:00
Matthew Macy 13a9a6f5e8 Make zfs_replay.c work on FreeBSD
FreeBSD's vfs currently doesn't permit file systems
to do their own locking. To avoid having to have
duplicate zfs functions with and without locking add
locking here. With luck these changes can be removed
in the future.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9715
2019-12-13 07:54:10 -08:00
Matthew Ahrens 9bb0d89c5c Fix use-after-free of vd_path in spa_vdev_remove()
After spa_vdev_remove_aux() is called, the config nvlist is no longer
valid, as it's been replaced by the new one (with the specified device
removed).  Therefore any pointers into the nvlist are no longer valid.
So we can't save the result of
`fnvlist_lookup_string(nv, ZPOOL_CONFIG_PATH)` (in vd_path) across the
call to spa_vdev_remove_aux().

Instead, use spa_strdup() to save a copy of the string before calling
spa_vdev_remove_aux.

Found by AddressSanitizer:

ERROR: AddressSanitizer: heap-use-after-free on address ...
READ of size 34 at 0x608000a1fcd0 thread T686
    #0 0x7fe88b0c166d  (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x5166d)
    #1 0x7fe88a5acd6e in spa_strdup spa_misc.c:1447
    #2 0x7fe88a688034 in spa_vdev_remove vdev_removal.c:2259
    #3 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
    #4 0x55ffbc769fba in ztest_execute ztest.c:6714
    #5 0x55ffbc779a90 in ztest_thread ztest.c:6761
    #6 0x7fe889cbc6da in start_thread
    #7 0x7fe8899e588e in __clone

0x608000a1fcd0 is located 48 bytes inside of 88-byte region
freed by thread T686 here:
    #0 0x7fe88b14e7b8 in __interceptor_free
    #1 0x7fe88ae541c5 in nvlist_free nvpair.c:874
    #2 0x7fe88ae543ba in nvpair_free nvpair.c:844
    #3 0x7fe88ae57400 in nvlist_remove_nvpair nvpair.c:978
    #4 0x7fe88a683c81 in spa_vdev_remove_aux vdev_removal.c:185
    #5 0x7fe88a68857c in spa_vdev_remove vdev_removal.c:2221
    #6 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
    #7 0x55ffbc769fba in ztest_execute ztest.c:6714
    #8 0x55ffbc779a90 in ztest_thread ztest.c:6761
    #9 0x7fe889cbc6da in start_thread

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #9706
2019-12-11 15:38:21 -08:00
Ryan Moeller 957c7aa23c Relocate common quota functions to shared code
The quota functions are common to all implementations and can be
moved to common code.  As a simplification they were moved to the
Linux platform code in the initial refactoring.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9710
2019-12-11 12:12:08 -08:00
Matthew Macy 4bc721965f Add FreeBSD jail support hooks
Add the 'zfs jail/unjail' subcommands along with the relevant 
documentation from FreeBSD.  This feature is not supported on
Linux and still requires the match kernel ioctls which will
be included when the FreeBSD platform code is integrated.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9686
2019-12-11 11:58:37 -08:00
Matthew Macy 657ce25357 Eliminate Linux specific inode usage from common code
Change many of the znops routines to take a znode rather
than an inode so that zfs_replay code can be largely shared
and in the future the much of the znops code may be shared.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9708
2019-12-11 11:53:57 -08:00
Paul Zuchowski f0bf435176 zio_decompress_data always ASSERTs successful decompression
This interferes with zdb_read_block trying all the decompression
algorithms when the 'd' flag is specified, as some are
expected to fail.  Also control the output when guessing
algorithms, try the more common compression types first, allow
specifying lsize/psize, and fix an uninitialized variable.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #9612 
Closes #9630
2019-12-10 15:51:58 -08:00
Matthew Macy 362ae8d11f Abstract away platform specific superblock references
The zfsvfs->z_sb field is Linux specified and should be abstracted.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9697
2019-12-10 09:21:07 -08:00
Matthew Macy 3c502d3b75 Exclude data from cores unconditionally and metadata conditionally
This change allows us to align the code dump logic across platforms.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9691
2019-12-09 12:29:56 -08:00
Matthew Macy ea79e90f99 Mark dsl_dataset_deactivate_feature_impl static
The dsl_dataset_deactivate_feature_impl() function is private and
should be marked as such.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9696
2019-12-09 12:26:33 -08:00
Brian Behlendorf a25861dcae
ZTS: Fix zpool_reopen_001_pos
Update the vdev_disk_open() retry logic to use a specified number
of milliseconds to be more robust.  Additionally, on failure log
both the time waited and requested timeout to the internal log.

The default maximum allowed open retry time has been increased
from 500ms to 1000ms.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9680
2019-12-09 11:09:14 -08:00
Matthew Macy 0dcef9b966 Disable sysfs feature checks on FreeBSD
The sysfs infrastructure for reporting supported features and
properties is Linux specific.  Disable it on FreeBSD until it can
be extended to be more portable.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9684
2019-12-06 09:44:29 -08:00
Attila Fülöp 3ac34ca375 ICP: Fix out of bounds write
If gcm_mode_encrypt_contiguous_blocks() is called more than once
in succession, with the accumulated lengths being less than
blocksize, ctx->copy_to will be incorrectly advanced. Later, if
out is NULL, the bcopy at line 114 will overflow
ctx->gcm_copy_to since ctx->gcm_remainder_len is larger than the
ctx->gcm_copy_to buffer can hold.

The fix is to set ctx->copy_to only if it's not already set.

For ZoL the issue may be academic, since in all my testing I wasn't
able to hit neither of both conditions needed to trigger it, but
other consumers can easily do so.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #9660
2019-12-06 09:36:19 -08:00
Matthew Macy f95704ca5e Disable EDONR on FreeBSD
FreeBSD uses its own crypto framework in-kernel which, at this time,
has no EDONR implementation.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9664
2019-12-05 13:10:29 -08:00
Matthew Macy e64e84eca5 Refactor deadman set failmode to be cross platform
Update zfs_deadman_failmode to use the ZFS_MODULE_PARAM_CALL
wrapper, and split the common and platform specific portions.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9670
2019-12-05 12:40:45 -08:00
Matthew Macy 2a8ba608d3 Replace ASSERTV macro with compiler annotation
Remove the ASSERTV macro and handle suppressing unused 
compiler warnings for variables only in ASSERTs using the 
__attribute__((unused)) compiler annotation.  The annotation
is understood by both gcc and clang.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9671
2019-12-05 12:37:00 -08:00
Attila Fülöp 54c8366e39 ICP: Fix null pointer dereference and use after free
In gcm_mode_decrypt_contiguous_blocks(), if vmem_alloc() fails,
bcopy is called with a NULL pointer destination and a length > 0.
This results in undefined behavior. Further ctx->gcm_pt_buf is
freed but not set to NULL, leading to a potential write after
free and a double free due to missing return value handling in
crypto_update_uio(). The code as is may write to ctx->gcm_pt_buf
in gcm_decrypt_final() and may free ctx->gcm_pt_buf again in
aes_decrypt_atomic().

The fix is to slightly rework error handling and check the return
value in crypto_update_uio().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #9659
2019-12-03 10:28:47 -08:00
Alexander Motin 5ff2249fa5 Fix use-after-free in case of L2ARC prefetch failure
In case L2ARC read failed, l2arc_read_done() creates _different_ ZIO
to read data from the original storage device.  Unfortunately pointer
to the failed ZIO remains in hdr->b_l1hdr.b_acb->acb_zio_head, and if
some other read try to bump the ZIO priority, it will crash.

The problem is reproducible by corrupting L2ARC content and reading
some data with prefetch if l2arc_noprefetch tunable is changed to 0.
With the default setting the issue is probably not reproducible now.

Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #9648
2019-12-03 09:59:30 -08:00
Brian Behlendorf 624222ae31
Increase allowed 'special_small_blocks' maximum value
There may be circumstances where it's desirable that all blocks
in a specified dataset be stored on the special device.  Relax
the artificial 128K limit and allow the special_small_blocks
property to be set up to 1M.  When blocks >1MB have been enabled
via the zfs_max_recordsize module option, this limit is increased
accordingly.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9131
Closes #9355
2019-12-03 09:58:03 -08:00
Matthew Macy b3673342c7 Wrap module_param_call() routines under __linux__
The module_param_call() functionality is currently still
Linux-specific and should be wrapped accordingly.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9666
2019-12-03 09:56:15 -08:00
Matthew Macy bff8fb395b Mark write_record static
The write_record() function is private and should be marked as such.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9665
2019-12-03 09:51:44 -08:00
Matthew Macy 74d1d74959 Move linux qsort def to platform header
Moving qsort to the platform header allows each platform to
provide an appropriate sorting implementation.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9663
2019-12-03 09:49:40 -08:00
Michael Niewöhner e69bb31b71 Adapt gitignore for modules
Remove the specific gitignore rules for module left-overs and add a
generic one in modules/.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #9656
2019-12-02 13:23:47 -08:00
Matthew Macy 5142032106 Move zfs_cmd_t copyin/copyout to platform code
FreeBSD needs to cope with multiple version of the zfs_cmd_t
structure. Allowing the platform code to pre and post
process the cmd structure makes it possible to work with
legacy tooling.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9624
2019-12-02 10:08:27 -08:00
Matthew Macy 758699b6f1 Restructure nvlist_nv_alloc to work on FreeBSD
KM_PUSHPAGE is an Illumosism - On FreeBSD it's
aliased to the same malloc flag as KM_SLEEP.
The compiler naturally rejects multiple case
statements with the same value.  This is effectively
a no-op since all callers pass a specific KM_* flag.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9643
2019-11-30 15:45:06 -08:00
Matthew Macy f348c78f97 Mark Linux fallocate extensions as specific to Linux
fallocate(2) is a Linux-specific system call which in unavailable
on other platforms.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9633
2019-11-30 15:40:22 -08:00
Matthew Macy a5b762ab1d Resolve ZoF differences in zfs_ioctl.h
FreeBSD needs to be able to pass the jail id to the jail/unjail ioctls
and the struct file in the device structure is unused.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9625
2019-11-30 15:35:54 -08:00
Brian Behlendorf 9e17e6f254
Remove zfs_vdev_elevator module option
As described in commit f81d5ef6 the zfs_vdev_elevator module
option is being removed.  Users who require this functionality
should update their systems to set the disk scheduler using a
udev rule.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8664
Closes #9417
Closes #9609
2019-11-27 10:35:49 -08:00
jwpoduska 3c819a2c7d Prevent unnecessary resilver restarts
If a device is participating in an active resilver, then it will have a
non-empty DTL. Operations like vdev_{open,reopen,probe}() can cause the
resilver to be restarted (or deferred to be restarted later), which is
unnecessary if the DTL is still covered by the current scan range. This
is similar to the logic in vdev_dtl_should_excise() where the DTL can
only be excised if it's max txg is in the resilvered range.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: John Poduska <jpoduska@datto.com>
Issue #840 
Closes #9155
Closes #9378
Closes #9551
Closes #9588
2019-11-27 10:15:01 -08:00
Mauricio Faria de Oliveira 0c46813805 Check for unlinked znodes after igrab()
The changes in commit 41e1aa2a / PR #9583 introduced a regression on
tmpfile_001_pos: fsetxattr() on a O_TMPFILE file descriptor started
to fail with errno ENODATA:

    openat(AT_FDCWD, "/test", O_RDWR|O_TMPFILE, 0666) = 3
    <...>
    fsetxattr(3, "user.test", <...>, 64, 0) = -1 ENODATA

The originally proposed change on PR #9583 is not susceptible to it,
so just move the code/if-checks around back in that way, to fix it.

Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Heitor Alves de Siqueira <halves@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Closes #9602
2019-11-21 12:24:03 -08:00
Matthew Macy da92d5cbb3 Add zfs_file_* interface, remove vnodes
Provide a common zfs_file_* interface which can be implemented on all 
platforms to perform normal file access from either the kernel module
or the libzpool library.

This allows all non-portable vnode_t usage in the common code to be 
replaced by the new portable zfs_file_t.  The associated vnode and
kobj compatibility functions, types, and macros have been removed
from the SPL.  Moving forward, vnodes should only be used in platform
specific code when provided by the native operating system.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9556
2019-11-21 09:32:57 -08:00
Brian Behlendorf 7ae3f8dc8f
Partially revert 5a6ac4c
Reinstate the zpl_revalidate() functionality to resolve a regression
where dentries for open files during a rollback are not invalidated.

The unrelated functionality for automatically unmounting .zfs/snapshots
was not reverted.  Nor was the addition of shrink_dcache_sb() to the
zfs_resume_fs() function.

This issue was not immediately caught by the CI because the test case
intended to catch it was included in the list of ZTS tests which may
occasionally fail for unrelated reasons.  Remove all of the rollback
tests from this list to help identify the frequency of any spurious
failures.

The rollback_003_pos.ksh test case exposes a real issue with the
long standing code which needs to be investigated.  Regardless,
it has been enable with a small workaround in the test case itself.

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9587
Closes #9592
2019-11-18 13:05:56 -08:00
Heitor Alves de Siqueira 41e1aa2a06 Break out of zfs_zget early if unlinked znode
If zp->z_unlinked is set, we're working with a znode that has been
marked for deletion. If that's the case, we can skip the "goto again"
loop and return ENOENT, as the znode should not be discovered.

Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Heitor Alves de Siqueira <halves@canonical.com>
Closes #9583
2019-11-15 09:56:05 -08:00
loli10K 7ba964cc3f Prevent NULL pointer dereference in blkg_tryget() on EL8 kernels
blkg_tryget() as shipped in EL8 kernels does not seem to handle NULL
@blkg as input; this is different from its mainline counterpart where
NULL is accepted.  To prevent dereferencing a NULL pointer when dealing
with block devices which do not set a root_blkg on the request queue
perform the NULL check in vdev_bio_associate_blkg().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9546 
Closes #9577
2019-11-13 10:19:06 -08:00
Michael Niewöhner 8aaa10a9a0 Check for __GFP_RECLAIM instead of GFP_KERNEL
Check for __GFP_RECLAIM instead of GFP_KERNEL because zfs modifies
IO and FS flags which breaks the check for GFP_KERNEL.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #9034
2019-11-13 10:05:23 -08:00
Michael Niewöhner 6d948c3519 Add kmem_cache flag for forcing kvmalloc
This adds a new KMC_KVMEM flag was added to enforce use of the
kvmalloc allocator in kmem_cache_create even for large blocks, which
may also increase performance in some specific cases (e.g. zstd), too.

Default to KVMEM instead of VMEM in spl_kmem_cache_create.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #9034
2019-11-13 10:05:23 -08:00
Michael Niewöhner 66955885e2 Make use of kvmalloc if available and fix vmem_alloc implementation
This patch implements use of kvmalloc for GFP_KERNEL allocations, which
may increase performance if the allocator is able to allocate physical
memory, if kvmalloc is available as a public kernel interface (since
v4.12). Otherwise it will simply fall back to virtual memory (vmalloc).

Also fix vmem_alloc implementation which can lead to slow allocations
since the first attempt with kmalloc does not make use of the noretry
flag but tells the linux kernel to retry several times before it fails.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #9034
2019-11-13 10:05:10 -08:00
Michael Niewöhner c025008df5 Add missing documentation for some KMC flags
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #9034
2019-11-13 09:34:51 -08:00
Brian Behlendorf 066e825221
Linux compat: Minimum kernel version 3.10
Increase the minimum supported kernel version from 2.6.32 to 3.10.
This removes support for the following Linux enterprise distributions.

    Distribution     | Kernel | End of Life
    ---------------- | ------ | -------------
    Ubuntu 12.04 LTS | 3.2    | Apr 28, 2017
    SLES 11          | 3.0    | Mar 32, 2019
    RHEL / CentOS 6  | 2.6.32 | Nov 30, 2020

The following changes were made as part of removing support.

* Updated `configure` to enforce a minimum kernel version as
  specified in the META file (Linux-Minimum: 3.10).

    configure: error:
        *** Cannot build against kernel version 2.6.32.
        *** The minimum supported kernel version is 3.10.

* Removed all `configure` kABI checks and matching C code for
  interfaces which solely predate the Linux 3.10 kernel.

* Updated all `configure` kABI checks to fail when an interface is
  missing which was in the 3.10 kernel up to the latest 5.1 kernel.
  Removed the HAVE_* preprocessor defines for these checks and
  updated the code to unconditionally use the verified interface.

* Inverted the detection logic in several kABI checks to match
  the new interface as it appears in 3.10 and newer and not the
  legacy interface.

* Consolidated the following checks in to individual files. Due
  the large number of changes in the checks it made sense to handle
  this now.  It would be desirable to group other related checks in
  the same fashion, but this as left as future work.

  - config/kernel-blkdev.m4 - Block device kABI checks
  - config/kernel-blk-queue.m4 - Block queue kABI checks
  - config/kernel-bio.m4 - Bio interface kABI checks

* Removed the kABI checks for sops->nr_cached_objects() and
  sops->free_cached_objects().  These interfaces are currently unused.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9566
2019-11-12 08:59:06 -08:00
Pavel Snajdr 5a6ac4cffc Remove zpl_revalidate
This patch removes the need for zpl_revalidate altogether.

There were 3 main reasons why we used d_revalidate:

1. periodic automounted snapshots umount deferral
2. negative dentries created before snapshot rollback
3. stale inodes referenced by dentry cache after snapshot rollback

Periodic snapshots deferral solution introduces zfs_exit_fs function,
which is called as a part of ZFS_EXIT(zfsvfs_t) macro.

Negative dentries and stale inodes are solved by flushing the dcache
for the particular dataset on zfs_resume_fs call.

This patch also removes now unused HAVE_S_D_OP configure test.

Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes #8774 
Closes #9549
2019-11-11 09:34:21 -08:00
Alexander Motin f15d6a5457 Improve logging of 128KB writes
Before my ZIL space optimization few years ago 128KB writes were logged
as two 64KB+ records in two 128KB log blocks.  After that change it
became ~127KB+/1KB+ in two 128KB log blocks to free space in the second
block for another record.  Unfortunately in case of 128KB only writes,
when space in the second block remained unused, that change increased
write latency by unbalancing checksum computation and write times
between parallel threads.  It also didn't help with SLOG space
efficiency in that case.

This change introduces new 68KB log block size, used for both writes
below 67KB and 128KB-sharp writes.  Writes of 68-127KB are still using
one 128KB block to not increase processing overhead.  Writes above
131KB are still using full 128KB blocks, since possible saving there
is small.  Mixed loads will likely also fall back to previous 128KB,
since code uses maximum of the last 16 requested block sizes.

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Closes #9409
2019-11-11 09:27:59 -08:00
Romain Dolbeau 4254e40729 Preliminary support for RV64G
This adds basic support for RISC-V, specifically RV64G.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes #9540
2019-11-06 10:56:09 -08:00
Matthew Macy 27ece2ee4d Move platform specific parts of zfs_znode.h to platform code
Some of the znode fields are different and functions
consuming an inode don't exist on FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9536
2019-11-06 10:54:25 -08:00
Prakash Surya ae38e00968 Add tracepoints for taskq entry lifetime events
This adds some new DTRACE_PROBE* endpoints so that we can observe taskq
latencies on a system. Additionally, a new "taskqlatency.bt" script is
added to do this observation via "bpftrace". Lastly, a "zfs-trace.sh"
script is added to wrap "bpftrace" with the proper options required to
run and use "taskqlatency.bt".

For example, with these changes in place, a user can run the following:

    $ cd ./contrib/bpftrace
    $ sudo ./zfs-trace.sh taskqlatency.bt
    Attaching 6 probes...
    ^C

Here's some example output, showing latency information for time spent
executing the taskq entry's function:

    @exec_lat_us[dp_sync_taskq, userquota_updates_task]:
    [2, 4)                 5 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
    [4, 8)                 0 |                                                    |
    [8, 16)                1 |@@@@@@@@@@                                          |
    [16, 32)               2 |@@@@@@@@@@@@@@@@@@@@                                |

    @exec_lat_us[z_wr_int_h, zio_execute]:
    [8, 16)               16 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
    [16, 32)               2 |@@@@@@                                              |

    @exec_lat_us[z_wr_iss_h, zio_execute]:
    [16, 32)               4 |@@@@@@@@@@@@@@@@                                    |
    [32, 64)              13 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
    [64, 128)              1 |@@@@                                                |

    @exec_lat_us[z_ioctl_int, zio_execute]:
    [2, 4)                 1 |@@@@                                                |
    [4, 8)                11 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
    [8, 16)                8 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@               |

    @exec_lat_us[dp_sync_taskq, sync_dnodes_task]:
    [2, 4)                 1 |@@@@@@                                              |
    [4, 8)                 7 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@       |
    [8, 16)                8 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
    [16, 32)               2 |@@@@@@@@@@@@@                                       |
    [32, 64)               4 |@@@@@@@@@@@@@@@@@@@@@@@@@@                          |
    [64, 128)              1 |@@@@@@                                              |
    [128, 256)             0 |                                                    |
    [256, 512)             1 |@@@@@@

Here's some example output, showing latency information for time spent
waiting on the taskq, prior to starting execution of entry's function:

    @queue_lat_us[dp_sync_taskq]:
    [2, 4)                 1 |@@@@                                                |
    [4, 8)                 7 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@                      |
    [8, 16)                2 |@@@@@@@@                                            |
    [16, 32)               3 |@@@@@@@@@@@@@                                       |
    [32, 64)              12 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
    [64, 128)              6 |@@@@@@@@@@@@@@@@@@@@@@@@@@                          |
    [128, 256)             0 |                                                    |
    [256, 512)             1 |@@@@                                                |

    @queue_lat_us[z_wr_iss]:
    [4, 8)                 4 |@@@@                                                |
    [8, 16)               13 |@@@@@@@@@@@@@@@                                     |
    [16, 32)               6 |@@@@@@@                                             |
    [32, 64)               2 |@@                                                  |
    [64, 128)             12 |@@@@@@@@@@@@@@                                      |
    [128, 256)            15 |@@@@@@@@@@@@@@@@@@                                  |
    [256, 512)            33 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@             |
    [512, 1K)             27 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@                    |
    [1K, 2K)               7 |@@@@@@@@                                            |
    [2K, 4K)              14 |@@@@@@@@@@@@@@@@                                    |
    [4K, 8K)              14 |@@@@@@@@@@@@@@@@                                    |
    [8K, 16K)             23 |@@@@@@@@@@@@@@@@@@@@@@@@@@@                         |
    [16K, 32K)            43 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|

    @queue_lat_us[z_wr_int]:
    [2, 4)                10 |@@@@@                                               |
    [4, 8)                71 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@           |
    [8, 16)               88 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
    [16, 32)              50 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@                       |
    [32, 64)              65 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@              |
    [64, 128)             43 |@@@@@@@@@@@@@@@@@@@@@@@@@                           |
    [128, 256)            19 |@@@@@@@@@@@                                         |
    [256, 512)             3 |@                                                   |
    [512, 1K)              1 |                                                    |

Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #9525
2019-11-01 13:14:54 -07:00
Prakash Surya e5d1c27e30 Enable use of DTRACE_PROBE* macros in "spl" module
This change modifies some of the infrastructure for enabling the use of
the DTRACE_PROBE* macros, such that we can use tehm in the "spl" module.

Currently, when the DTRACE_PROBE* macros are used, they get expanded to
create new functions, and these dynamically generated functions become
part of the "zfs" module.

Since the "spl" module does not depend on the "zfs" module, the use of
DTRACE_PROBE* in the "spl" module would result in undefined symbols
being used in the "spl" module. Specifically, DTRACE_PROBE* would turn
into a function call, and the function being called would be a symbol
only contained in the "zfs" module; which results in a linker and/or
runtime error.

Thus, this change adds the necessary logic to the "spl" module, to
mirror the tracing functionality available to the "zfs" module. After
this change, we'll have a "trace_zfs.h" header file which defines the
probes available only to the "zfs" module, and a "trace_spl.h" header
file which defines the probes available only to the "spl" module.

Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #9525
2019-11-01 13:13:43 -07:00
Matthew Macy 4a2ed90013 Wrap Linux module macros
MODULE_VERSION is already defined on FreeBSD. Wrap all of the
used MODULE_* macros for the sake of consistency and portability.

Add a user space noop version to reduce the need for _KERNEL ifdefs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9542
2019-11-01 10:41:03 -07:00
Matthew Macy bd4dde8ef7 Prefix struct rangelock
A struct rangelock already exists on FreeBSD.  Add a zfs_ prefix as
per our convention to prevent any conflict with existing symbols.
This change is a follow up to 2cc479d0.

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9534
2019-11-01 10:37:33 -07:00
Matthew Macy 32682b0c03 Fix icp build on FreeBSD
- ROTATE_LEFT is not used by amd64, move it down within
  the scope it's used to silence a clang warning.

- __unused is an alias for the compiler annotation
  __attribute__((__unused__)) on FreeBSD.  Rename the
  field to ____unused.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9538
2019-11-01 10:27:53 -07:00
Matthew Macy 156f74fc03 Return an error code from zfs_acl_chmod_setattr
The FreeBSD implementation can fail, allow this function to
fail and add the required error handling for Linux.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9541
2019-11-01 10:19:11 -07:00
Matthew Macy 59055a0164 Include prototypes for vdev_initialize
Address two prototype related warnings emitted by clang.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9535
2019-10-31 10:09:01 -07:00
Matthew Macy 2a3aa5a109 Factor Linux specific code out of spa_misc.c
Move these Linux module parameter get/set helpers in to
platform specific code.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9457
2019-10-31 09:52:22 -07:00
Romain Dolbeau 0b2a642351 Add AVX512BW variant of fletcher
It is much faster than AVX512F when byteswapping on Skylake-SP
and newer, as we can do the byteswap in a single vshufb instead
of many instructions.

Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes #9517
2019-10-30 12:26:14 -07:00
Tom Caputi bae11ba8dc Fix 'zfs change-key' with unencrypted child
Currently, when you call 'zfs change-key' on an encrypted dataset
that has an unencrypted child, the code will trigger a VERIFY.
This VERIFY is leftover from before we allowed unencrypted
datasets to exist underneath encrypted ones. This patch fixes the
issue by simply replacing the VERIFY with an early return when
recursing through datasets.

Reviewed by: Jason King <jason.brian.king@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9524
2019-10-30 11:27:28 -07:00
Matthew Macy 4a22ba5be0 Minor spa portability fixes
- FreeBSD's rootpool import code uses spa_config_parse
- Move the zvol_create_minors call out from under the
  spa_namespace_lock in spa_import. It isn't needed and it causes
  a lock order reversal on FreeBSD.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9499
2019-10-28 09:51:53 -07:00
loli10K e35704647e Fix for ARC sysctls ignored at runtime
This change leverage module_param_call() to run arc_tuning_update()
immediately after the ARC tunable has been updated as suggested in
cffa8372 code review.

A simple test case is added to the ZFS Test Suite to prevent future
regressions in functionality.

Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9487  
Closes #9489
2019-10-26 15:22:19 -07:00
Matthew Macy 0ee89a1252 Remove non-portable pointer is valid assert
This assert makes non portable assumptions about the state of memory
returned by the memory allocator.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9506
2019-10-25 13:46:07 -07:00
Matthew Macy c392c5aec0 Move final zvol_remove_minors to common code
This logic is not platform dependent and should reside in the
common code.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9505
2019-10-25 13:42:54 -07:00
Matthew Macy 68a1b1589a Remove sdt.h
It's mostly a noop on ZoL and it conflicts with platforms that 
support dtrace.  Remove this header to resolve the conflict.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9497
2019-10-25 13:38:37 -07:00
Brian Behlendorf 10fa254539
Linux 4.14, 4.19, 5.0+ compat: SIMD save/restore
Contrary to initial testing we cannot rely on these kernels to
invalidate the per-cpu FPU state and restore the FPU registers.
Nor can we guarantee that the kernel won't modify the FPU state
which we saved in the task struck.

Therefore, the kfpu_begin() and kfpu_end() functions have been
updated to save and restore the FPU state using our own dedicated
per-cpu FPU state variables.

This has the additional advantage of allowing us to use the FPU
again in user threads.  So we remove the code which was added to
use task queues to ensure some functions ran in kernel threads.

Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #9346
Closes #9403
2019-10-24 10:17:33 -07:00