Commit Graph

586 Commits

Author SHA1 Message Date
Brian Behlendorf 58bc86c5cb Linux 5.10 compat: use iov_iter in uio structure
As of the 5.10 kernel the generic splice compatibility code has been
removed.  All filesystems are now responsible for registering a
->splice_read and ->splice_write callback to support this operation.

The good news is the VFS provided generic_file_splice_read() and
iter_file_splice_write() callbacks can be used provided the ->iter_read
and ->iter_write callback support pipes.  However, this is currently
not the case and only iovecs and bvecs (not pipes) are ever attached
to the uio structure.

This commit changes that by allowing full iov_iter structures to be
attached to uios.  Ever since the 4.9 kernel the iov_iter structure
has supported iovecs, kvecs, bvevs, and pipes so it's desirable to
pass the entire thing when possible.  In conjunction with this the
uio helper functions (i.e uiomove(), uiocopy(), etc) have been
updated to understand the new UIO_ITER type.

Note that using the kernel provided uio_iter interfaces allowed the
existing Linux specific uio handling code to be simplified.  When
there's no longer a need to support kernel's older than 4.9, then
it will be possible to remove the iovec and bvec members from the
uio structure and always use a uio_iter.  Until then we need to
maintain all of the existing types for older kernels.

Some additional refactoring and cleanup was included in this change:

- Added checks to configure to detect available iov_iter interfaces.
  Some are available all the way back to the 3.10 kernel and are used
  when available.  In particular, uio_prefaultpages() now always uses
  iov_iter_fault_in_readable() which is available for all supported
  kernels.

- The unused UIO_USERISPACE type has been removed.  It is no longer
  needed now that the uio_seg enum is platform specific.

- Moved zfs_uio.c from the zcommon.ko module to the Linux specific
  platform code for the zfs.ko module.  This gets it out of libzfs
  where it was never needed and keeps this Linux specific code out
  of the common sources.

- Removed unnecessary O_APPEND handling from zfs_iter_write(), this
  is redundant and O_APPEND is already handled in zfs_write();

NOTE: Cleanly applying this kernel compatibility change required
applying the following commits.  This makes the change larger than
it absolutely needs to be, but the resulting code matches what's in
the branch branch.  This is both more tested and makes it easier to
apply any future backports in this area.

7cf4cd824 Remove incorrect assertion
783be694f Reduce confusion in zfs_write
af5626ac2 Return EFAULT at the end of zfs_write() when set
cc1f85be8 Simplify offset and length limit in zfs_write
9585538d0 Const some unchanging variables in zfs_write
86e74dc16 Remove redundant oid parameter to update_pages
b3d723fb0 Factor uid, gid, and projid out of loop in zfs_write
3d40b6554 Share zfs_fsync, zfs_read, zfs_write, et al between Linux and FreeBSD

Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-12-23 14:35:39 -08:00
Ryan Libby 42bdfd3b36 FreeBSD libzfs: gcc requires __thread after static
Building libzfs with gcc on FreeBSD failed because gcc is picky about
the order of keywords in declarations with __thread, whereas clang is
more relaxed.

https://gcc.gnu.org/onlinedocs/gcc/Thread-Local.html

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Closes 
2020-12-23 14:34:59 -08:00
Brian Behlendorf 056287e3f7 Include the ABI with dist tarball
The ABI should be included when generating the `make dist` tarball
since it's required by the `make checkabi` target.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-11-22 10:01:47 -08:00
Brian Behlendorf be12087783 Add ABI snapshot
Add a snapshot of the OpenZFS 2.0 ABI using libabigail-1.7-2.
The included ABI passes `make checkabi` for CentOS 7, Fedora 33,
Debian 10, and Ubuntu 20.04.  This covers a fairly wide range
of glibc, gcc, and libabigail versions plus other changes which
are platform specific.

Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-11-17 20:48:53 +00:00
Antonio Russo 4f9014b70b Library ABI tracking with abigail
Provide two make targets: checkabi and storeabi.

storeabi uses libabigail to generate a reference copy of the ABI for the
public libraries.

checkabi compares such a reference to the compiled version, failing if
they are not compatible.  No ABI is generated for libzpool.so, it is
only used by ztest and zdb and not external consumers.

Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes 
2020-11-17 20:29:02 +00:00
наб c06118e0b1 zpool: correctly align columns with -p
zpool_expand_proplist() now ignores pl_fixed if its new literal
argument is true.  The rest is a consequence of needing to pass
that down.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiao?=~Dska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2020-11-17 12:20:01 -08:00
Antonio Russo 1f442afa41 Synchronize library ABI levels
Bump library SOVERSION under Linux to match FreeBSD's.

Additionally, this bump properly accounts for the ABI changes relative
to ZoL 0.8.5 for the Linux build.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Issue 
2020-11-03 09:51:53 -08:00
Ryan Moeller c3ae9321bf Update references to nonexistent man pages in code
Refer to the correct section or alternative for FreeBSD and Linux.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-10-30 16:04:41 -07:00
Ryan Moeller a51019f4ec FreeBSD: Improve libzfs_error_init messages
It is a common mistake to have failed to autoload the module due to
permission issues when running a ZFS command as a user.  "Operation
not permitted" is an unhelpfully vague error message.

Use a thread-local message buffer to format a nicer error message.
We can infer that loading the kernel module failed if the module is
not loaded.  This can be extended with heuristics for other errors
in the future.

While looking at this stuff, remove an unused thread-local message
buffer found in libspl and remove some inaccurate verbiage from the
comment on libzfs_load_module.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-10-16 13:02:46 -07:00
Christian Schwarz 102a1db6b2 libzfs_sendrecv: zfs_send: remove unused pipefd and tid variables
fixup of 196bee4

On gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), the code removed
caused `-Wmaybe-uninitialized` errors.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes 
2020-10-16 13:00:37 -07:00
Alan Somers d6bee967ed Fix EIO after resuming receive of new dataset over an existing one
When resuming an interrupted ZFS send stream that creates a new dataset
with the same name as an existing dataset, if the existing dataset is
accessed after the failed receive, then after the subsequent successful
receive it will return EIO. This happens because nothing mounts the new
dataset, leaving the old, no longer valid dataset still mounted.

This commit fixes zfs receive to always unmount and remount the
destination, regardless of whether the stream is a new stream or a
resumed stream.

Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
External-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=249579
Closes 
Closes 
2020-10-16 12:56:22 -07:00
Allan Jude 56e69c1e9c libzfs: Don't leak buf if nvlist is too large
Resolves FreeBSD Coverity defect:
CID 1432398:  Resource leaks  (RESOURCE_LEAK)

libzfs: don't leak hdl if there is an error reading env var

Resolves FreeBSD Coverity defect:
CID 1432395:  Resource leaks  (RESOURCE_LEAK)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Closes 
2020-09-18 12:38:40 -07:00
George Wilson dacb4f6a61 pool may become suspended during device expansion
When expanding a device zfs needs to rescan the partition table to
get the correct size. This can only happen when we're in the kernel
and requires the device to be closed. As part of the rescan, udev is
notified and the device links are removed and recreated. This leave a
window where the vdev code may try to reopen the device before udev
has recreated the link. If that happens, then the pool may end up in
a suspended state.

To correct this, we leverage the BLKPG_RESIZE_PARTITION ioctl which
allows the partition information to be modified even while it's in use.
This ioctl also does not remove the device link associated with the zfs
data partition so it eliminates the race condition that can occur in
the kernel.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes 
2020-09-18 12:38:30 -07:00
Toomas Soome 84d9492e52 zfs label bootenv should store data as nvlist
nvlist does allow us to support different data types and systems.

To encapsulate user data to/from nvlist, the libzfsbootenv library is
provided.

Reviewed-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes 
2020-09-15 18:36:12 -07:00
Fabio Buso 3625a0131a Display pbkdf2iters property as plain number
The pbkdf2iters property is an iteration counter
and should be displayed as plain number rather
than in binary unit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabio Buso <buso.fabio@gmail.com>
Closes 
2020-09-09 10:26:02 -07:00
Ryan Moeller c0234eab65 Spruce up pkg-config files for libzfs/libzfs_core
Several of the listed library dependencies are not relevant on FreeBSD.
Have ./configure save libraries that are found via pkg-config as
${LIB}_PC and use the configured automake variables instead of hard
coded names so we only get what was actually needed.

While here, update the URL to point at the OpenZFS Github repo.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-09-09 10:26:01 -07:00
Ryan Moeller 76a157f004 Add 'zfs rename -u' to rename without remounting
Allow to rename file systems without remounting if it is possible.
It is possible for file systems with 'mountpoint' property set to
'legacy' or 'none' - we don't have to change mount directory for them.
Currently such file systems are unmounted on rename and not even
mounted back.

This introduces layering violation, as we need to update
'f_mntfromname' field in statfs structure related to mountpoint (for
the dataset we are renaming and all its children).

In my opinion it is worth it, as it allow to update FreeBSD in even
cleaner way - in ZFS-only configuration root file system is ZFS file
system with 'mountpoint' property set to 'legacy'. If root dataset is
named system/rootfs, we can snapshot it (system/rootfs@upgrade), clone
it (system/oldrootfs), update FreeBSD and if it doesn't boot we can
boot back from system/oldrootfs and rename it back to system/rootfs
while it is mounted as /. Before it was not possible, because
unmounting / was not possible.

Authored by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Matt Macy <mmacy@freebsd.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-09-03 16:16:15 -07:00
Ryan Moeller 57fc3987a0 zpool: Change base URL for ZFS messages to openzfs-docs
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-08-27 16:06:57 -07:00
Allan Jude 7a6c12fd6a
Don't assert on nvlists larger than SPA_MAXBLOCKSIZE
Originally we asserted that all reads are less than SPA_MAXBLOCKSIZE
However, nvlists are not ZFS records, and are not limited to
SPA_MAXBLOCKSIZE.

Add a new environment variable, ZFS_SENDRECV_MAX_NVLIST, to allow the
user to specify the maximum size of the nvlist that can be sent or
received.
Default value: 4 * SPA_MAXBLOCKSIZE (64 MB)

Modify libzfs send routines to return a useful error if the send stream
will generate an nvlist that is beyond the maximum size.

Modify libzfs recv routines to add an explicit error message if the
nvlist is too large, rather than abort()ing.

Move the change the assert() to only trigger on data records

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes 
2020-08-25 11:04:20 -07:00
Ryan Moeller 6fe3498ca3
Import vdev ashift optimization from FreeBSD
Many modern devices use physical allocation units that are much
larger than the minimum logical allocation size accessible by
external commands. Two prevalent examples of this are 512e disk
drives (512b logical sector, 4K physical sector) and flash devices
(512b logical sector, 4K or larger allocation block size, and 128k
or larger erase block size). Operations that modify less than the
physical sector size result in a costly read-modify-write or garbage
collection sequence on these devices.

Simply exporting the true physical sector of the device to ZFS would
yield optimal performance, but has two serious drawbacks:

 1. Existing pools created with devices that have different logical
    and physical block sizes, but were configured to use the logical
    block size (e.g. because the OS version used for pool construction
    reported the logical block size instead of the physical block
    size) will suddenly find that the vdev allocation size has
    increased. This can be easily tolerated for active members of
    the array, but ZFS would prevent replacement of a vdev with
    another identical device because it now appears that the smaller
    allocation size required by the pool is not supported by the new
    device.

 2. The device's physical block size may be too large to be supported
    by ZFS. The optimal allocation size for the vdev may be quite
    large. For example, a RAID controller may export a vdev that
    requires read-modify-write cycles unless accessed using 64k
    aligned/sized requests. ZFS currently has an 8k minimum block
    size limit.

Reporting both the logical and physical allocation sizes for vdevs
solves these problems. A device may be used so long as the logical
block size is compatible with the configuration. By comparing the
logical and physical block sizes, new configurations can be optimized
and administrators can be notified of any existing pools that are
sub-optimal.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Matthew Macy <mmacy@freebsd.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes 
2020-08-21 12:53:17 -07:00
George Melikov 663a070c92
Remove unused `zpool_is_bootable`
Otherwise compiler errors with:

```
libzfs_pool.c:449:1: error: 'zpool_is_bootable'
 defined but not used [-Werror=unused-function]
```

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes 
2020-08-18 09:30:12 -07:00
Richard Laager eaa25f1a8e
Remove GRUB restrictions
The GRUB restrictions are based around the pool's bootfs property.
Given the current situation where GRUB is not staying current with
OpenZFS pool features, having either a non-ZFS /boot or a separate
pool with limited features are pretty much the only long-term answers
for GRUB support.  Only the second case matters in this context.  For
the restrictions to be useful, the bootfs property would have to be set
on the boot pool, because that is where we need the restrictions, as
that is the pool that GRUB reads from. The documentation for bootfs
describes it as pointing to the root pool. That's also how it's used in
the initramfs. ZFS does not allow setting bootfs to point to a dataset
in another pool. (If it did, it'd be difficult-to-impossible to enforce
these restrictions cross-pool). Accordingly, bootfs is pretty much
useless for GRUB scenarios moving forward.

Even for users who have only one pool, the existing restrictions for
GRUB are incomplete. They don't prevent you from enabling the
unsupported checksums, for example. For that reason, I have ripped out
all the GRUB restrictions.

A little longer-term, I think extending the proposed features=portable
system to define a features=grub is a much more useful approach. The
user could set that on the boot pool at creation, and things would
Just Work.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes 
2020-08-17 23:12:39 -07:00
Matthew Macy 6f763d4085
FreeBSD: Fix module autoloading when built in base
The KMOD name is "zfs" instead of "openzfs" when building in FreeBSD.

Define a ZFS_KMOD symbol as "zfs" when IN_BASE is defined, otherwise
"openzfs".

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-08-11 13:49:50 -07:00
Ryan Moeller b6737193ee
FreeBSD: Fix `zfs jail` and add a test
zfs_jail was not using zfs_ioctl so failed to map the IOC number
correctly.  Use zfs_ioctl to perform the jail ioctl and add a test 
case for FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-08-01 08:44:54 -07:00
Allan Jude 8fb79fdddb
Change the error handling for invalid property values
ZFS recv should return a useful error message when an invalid index
property value is provided in the send stream properties nvlist

With a compression= property outside of the understood range:

Before:
```
receiving full stream of zof/zstd_send@send2 into testpool/recv@send2
internal error: Invalid argument
Aborted (core dumped)
```
Note: the recv completes successfully, the abort() is likely just to
make it easier to track the unexpected error code.

After:
```
receiving full stream of zof/zstd_send@send2 into testpool/recv@send2
cannot receive compression property on testpool/recv: invalid property
value received 28.9M stream in 1 seconds (28.9M/sec)
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes 
2020-08-01 08:41:31 -07:00
Allan Jude 24f98ed383
When encountering EZFS_UNKNOWN, print the error text buffer anyway
Rather than just saying there was an internal error, provide any
context we might have to the user to help them understand the issue.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes 
2020-07-31 09:07:37 -07:00
Kyle Evans b197457cd6
libzfs: const'ify path argument to zfs_path_to_zhandle
zfs_path_to_zhandle has no need to mutate the path argument,
most notably:

- zfs_open takes path as const
- getextmntent takes path as const
- fprintf most clearly doesn't need to mutate it

It's hard to foresee any reason that libzfs could conceivably
want to mutate it in the future, either, so const'ify it.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes 
2020-07-22 11:14:20 -07:00
Joao Carlos Mendes Luis 5f72109e5b
Disable -Wl,-z,defs for ASAN builds
Commit af65916 added -Wl,-z,defs for the shared libraries. This
apparently does not work in some cases with --enable-asan, so only add
it for non-ASAN builds.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: João Carlos Mendes Luis <jonny@jonny.eng.br>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
Closes 
2020-07-14 12:17:44 -07:00
George Wilson c15d36c674
Remove dependency on sharetab file and refactor sharing logic
== Motivation and Context

The current implementation of 'sharenfs' and 'sharesmb' relies on
the use of the sharetab file. The use of this file is os-specific
and not required by linux or freebsd. Currently the code must
maintain updates to this file which adds complexity and presents
a significant performance impact when sharing many datasets. In
addition, concurrently running 'zfs sharenfs' command results in
missing entries in the sharetab file leading to unexpected failures.

== Description

This change removes the sharetab logic from the linux and freebsd
implementation of 'sharenfs' and 'sharesmb'. It still preserves an
os-specific library which contains the logic required for sharing
NFS or SMB. The following entry points exist in the vastly simplified
libshare library:

- sa_enable_share -- shares a dataset but may not commit the change
- sa_disable_share -- unshares a dataset but may not commit the change
- sa_is_shared -- determine if a dataset is shared
- sa_commit_share -- notify NFS/SMB subsystem to commit the shares
- sa_validate_shareopts -- determine if sharing options are valid

The sa_commit_share entry point is provided as a performance enhancement
and is not required. The sa_enable_share/sa_disable_share may commit
the share as part of the implementation. Libshare provides a framework
for both NFS and SMB but some operating systems may not fully support
these protocols or all features of the protocol.

NFS Operation:
For linux, libshare updates /etc/exports.d/zfs.exports to add
and remove shares and then commits the changes by invoking
'exportfs -r'. This file, is automatically read by the kernel NFS
implementation which makes for better integration with the NFS systemd
service. For FreeBSD, libshare updates /etc/zfs/exports to add and
remove shares and then commits the changes by sending a SIGHUP to
mountd.

SMB Operation:
For linux, libshare adds and removes files in /var/lib/samba/usershares
by calling the 'net' command directly. There is no need to commit the
changes. FreeBSD does not support SMB.

== Performance Results

To test sharing performance we created a pool with an increasing number
of datasets and invoked various zfs actions that would enable and
disable sharing. The performance testing was limited to NFS sharing.
The following tests were performed on an 8 vCPU system with 128GB and
a pool comprised of 4 50GB SSDs:

Scale testing:
- Share all filesystems in parallel -- zfs sharenfs=on <dataset> &
- Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> &

Functional testing:
- share each filesystem serially -- zfs share -a
- unshare each filesystem serially -- zfs unshare -a
- reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool>

For 'zfs sharenfs=on' scale testing we saw an average reduction in time
of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time
of 83.36%.

Functional testing also shows a huge improvement:
- zfs share -- 97.97% reduction in time
- zfs unshare -- 96.47% reduction in time
- zfs inhert -r sharenfs -- 99.01% reduction in time

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Bryant G. Ly <bryangly@gmail.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
External-Issue: DLPX-68690
Closes 
Closes 
Closes 
Closes 
2020-07-13 09:19:18 -07:00
Ryan Moeller 217f48373f
libzfs: Add error message for why creating mountpoint failed
When zfs_mount_at() fails to stat the mountpoint and can't create the
directory, we return an error with a message "failed to create
mountpoint" but there is no indication why it failed.

Add the error string from the syscall to the error aux message.

Update do_mount for Linux to return the errno instead of -1.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-07-11 17:16:13 -07:00
Arvind Sankar 3e597dee11 Use abs_top_builddir when referencing libraries
libtool stores absolute paths in the dependency_libs component of the
.la files. If the Makefile for a dependent library refers to the
libraries by relative path, some libraries end up duplicated on the link
command line.

As an example, libzfs specifies libzfs_core, libnvpair and libuutil as
dependencies to be linked in. The .la file for libzfs_core also
specifies libnvpair, but using an absolute path, with the result that
libnvpair is present twice in the linker command line for producing
libzfs.

While the only thing this causes is to slightly slow down the linking,
we can avoid it by using absolute paths everywhere, including for
convenience libraries just for consistency.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-07-10 14:26:32 -07:00
Arvind Sankar af65916226 Add -z defs to LDFLAGS
This will make sure the installed libraries are linked with everything
they require.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-07-10 14:26:22 -07:00
Arvind Sankar 1537105a8c Add config.rpath for AM_GNU_GETTEXT
Commit e8864b1b28 ("config: libintl/libiconv for gettext() detection")
added an empty config.rpath with a comment that the real one doesn't
work with libtool.

However, an empty config.rpath doesn't really work: eg. on FreeBSD,
where libintl is in /usr/local/lib, configure thinks that gettext
doesn't exist and NLS should be disabled, which currently isn't
supported in the source, and hence requires manual workaround to
directly link -lintl without relying on configure. config.rpath is
essential to let it be detected either in --prefix or using
--with-libintl-prefix.

I also don't see the mentioned issue with libtool flags applied to
compilation, it seems to work fine to pass LTLIBINTL to libtool. It's
unnecessary to include LTLIBICONV as the configure test will
automatically append that to LTLIBINTL if it is necessary to link with
libiconv.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-07-10 14:26:12 -07:00
Arvind Sankar 4d61ade1a3 Clean up lib dependencies
libzutil is currently statically linked into libzfs, libzfs_core and
libzpool. Avoid the unnecessary duplication by removing it from libzfs
and libzpool, and adding libzfs_core to libzpool.

Remove a few unnecessary dependencies:
- libuutil from libzfs_core
- libtirpc from libspl
- keep only libcrypto in libzfs, as we don't use any functions from
  libssl
- librt is only used for clock_gettime, however on modern systems that's
  in libc rather than librt. Add a configure check to see if we actually
  need librt
- libdl from raidz_test

Add a few missing dependencies:
- zlib to libefi and libzfs
- libuuid to zpool, and libuuid and libudev to zed
- libnvpair uses assertions, so add assert.c to provide aok and
  libspl_assertf

Sort the LDADD for programs so that libraries that satisfy dependencies
come at the end rather than the beginning of the linker command line.

Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY
instead. This can take advantage of pkg-config, and it also avoids
polluting LIBS.

List all the required dependencies in the pkgconfig files, and move the
one for libzfs_core into the latter's directory. Install pkgconfig files
in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on
FreeBSD, instead of /usr/share/pkgconfig, as the more correct location
for library .pc files.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-07-10 14:26:00 -07:00
Ryan Moeller 659f4008be
libzfs: Make zfs_cmd_t initialization consistent, use zfs_ioctl
The clang version 8.0.1 shipped in FreeBSD 12.1-RELEASE also oddly
throws a warning that is treated as an error on the initialization of
the zc struct in zpool_nextboot.

The zpool_nextboot code from FreeBSD was not updated to use zfs_ioctl.

Switch ioctl to zfs_ioctl in and use {"\0"} to initialize the struct.
Do a consistency pass for zfs_cmd_t initialization.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-07-09 17:47:12 -07:00
Ryan Moeller fb91f0367e
Add zpool_nextboot, move zfs_jail to libzfs.h
FreeBSD has a zfsbootcfg command that wants zpool_nextboot in libzfs.

Add the function to FreeBSD's libzfs_compat.c, and while here move
the prototype for zfs_jail out of param.h in FreeBSD's SPL and into
libzfs.h under an ifdef for FreeBSD, where the prototype for
zpool_nextboot joins it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-07-06 11:57:24 -07:00
Brian Behlendorf 9a49d3f3d3
Add device rebuild feature
The device_rebuild feature enables sequential reconstruction when
resilvering.  Mirror vdevs can be rebuilt in LBA order which may
more quickly restore redundancy depending on the pools average block
size, overall fragmentation and the performance characteristics
of the devices.  However, block checksums cannot be verified
as part of the rebuild thus a scrub is automatically started after
the sequential resilver completes.

The new '-s' option has been added to the `zpool attach` and
`zpool replace` command to request sequential reconstruction
instead of healing reconstruction when resilvering.

    zpool attach -s <pool> <existing vdev> <new vdev>
    zpool replace -s <pool> <old vdev> <new vdev>

The `zpool status` output has been updated to report the progress
of sequential resilvering in the same way as healing resilvering.
The one notable difference is that multiple sequential resilvers
may be in progress as long as they're operating on different
top-level vdevs.

The `zpool wait -t resilver` command was extended to wait on
sequential resilvers.  From this perspective they are no different
than healing resilvers.

Sequential resilvers cannot be supported for RAIDZ, but are
compatible with the dRAID feature being developed.

As part of this change the resilver_restart_* tests were moved
in to the functional/replacement directory.  Additionally, the
replacement tests were renamed and extended to verify both
resilvering and rebuilding.

Original-patch-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: John Poduska <jpoduska@datto.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-07-03 11:05:50 -07:00
Arvind Sankar 6b99fc0620 Fixes for make dist
Reduce the usage of EXTRA_DIST. If files are conditionally included in
_SOURCES, _HEADERS etc, automake is smart enough to dist all files that
could possibly be included, but this does not apply to EXTRA_DIST,
resulting in make dist depending on the configuration.

Add some files that were missing altogether in various Makefile's.

The changes to disted files in this commit (excluding deleted files):

+./cmd/zed/agents/README.md
+./etc/init.d/README.md
+./lib/libspl/os/freebsd/getexecname.c
+./lib/libspl/os/freebsd/gethostid.c
+./lib/libspl/os/freebsd/getmntany.c
+./lib/libspl/os/freebsd/mnttab.c
-./lib/libzfs/libzfs_core.pc
-./lib/libzfs/libzfs.pc
+./lib/libzfs/os/freebsd/libzfs_compat.c
+./lib/libzfs/os/freebsd/libzfs_fsshare.c
+./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c
+./lib/libzfs/os/freebsd/libzfs_zmount.c
+./lib/libzutil/os/freebsd/zutil_compat.c
+./lib/libzutil/os/freebsd/zutil_device_path_os.c
+./lib/libzutil/os/freebsd/zutil_import_os.c
+./module/lua/README.zfs
+./module/os/linux/spl/README.md
+./tests/README.md
+./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh
+./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh
+./tests/zfs-tests/tests/functional/inheritance/README.config
+./tests/zfs-tests/tests/functional/inheritance/README.state
+./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh
+./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-06-26 14:20:02 -07:00
Prawn 2451a55368
zfs -V: Print userland version even if kernel module not loaded
Running zfs -V when the modules are not loaded would currently 
result in the following output:

    zfs_version_kernel() failed: No such file or directory

Note the lack of userland version output.  Reorder the code to
ensure the userland version is printed even when the kmods
are not loaded.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes 
2020-06-22 09:56:29 -07:00
Arvind Sankar 0ce2de637b Add prototypes
Add prototypes/move prototypes to header files.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-06-18 12:21:32 -07:00
Arvind Sankar 60356b1a21 Add include files for prototypes
Include the header with prototypes in the file that provides definitions
as well, to catch any mismatch between prototype and definition.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-06-18 12:21:25 -07:00
Arvind Sankar c3fe42aabd Remove dead code
Delete unused functions.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-06-18 12:21:18 -07:00
Arvind Sankar 65c7cc49bf Mark functions as static
Mark functions used only in the same translation unit as static. This
only includes functions that do not have a prototype in a header file
either.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-06-18 12:20:38 -07:00
Andrea Gelmini dd4bc569b9
Fix typos
Correct various typos in the comments and tests.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes 
2020-06-09 21:24:09 -07:00
Matthew Ahrens 7bcb7f0840
File incorrectly zeroed when receiving incremental stream that toggles -L
Background:

By increasing the recordsize property above the default of 128KB, a
filesystem may have "large" blocks.  By default, a send stream of such a
filesystem does not contain large WRITE records, instead it decreases
objects' block sizes to 128KB and splits the large blocks into 128KB
blocks, allowing the large-block filesystem to be received by a system
that does not support the `large_blocks` feature.  A send stream
generated by `zfs send -L` (or `--large-block`) preserves the large
block size on the receiving system, by using large WRITE records.

When receiving an incremental send stream for a filesystem with large
blocks, if the send stream's -L flag was toggled, a bug is encountered
in which the file's contents are incorrectly zeroed out.  The contents
of any blocks that were not modified by this send stream will be lost.
"Toggled" means that the previous send used `-L`, but this incremental
does not use `-L` (-L to no-L); or that the previous send did not use
`-L`, but this incremental does use `-L` (no-L to -L).

Changes:

This commit addresses the problem with several changes to the semantics
of zfs send/receive:

1. "-L to no-L" incrementals are rejected.  If the previous send used
`-L`, but this incremental does not use `-L`, the `zfs receive` will
fail with this error message:

    incremental send stream requires -L (--large-block), to match
    previous receive.

2. "no-L to -L" incrementals are handled correctly, preserving the
smaller (128KB) block size of any already-received files that used large
blocks on the sending system but were split by `zfs send` without the
`-L` flag.

3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`.
This feature indicates that we can correctly handle "no-L to -L"
incrementals.  This flag is currently not set on any send streams.  In
the future, we intend for incremental send streams of snapshots that
have large blocks to use `-L` by default, and these streams will also
have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams
from the default use of `zfs send` won't encounter the bug mentioned
above, because they can't be received by software with the bug.

Implementation notes:

To facilitate accessing the ZPL's generation number,
`zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and
restructured to fill in a struct with ZPL-specific info including owner
and generation.

In the "no-L to -L" case, if this is a compressed send stream (from
`zfs send -cL`), large WRITE records that are being written to small
(128KB) blocksize files need to be decompressed so that they can be
written split up into multiple blocks.  The zio pipeline will recompress
each smaller block individually.

A new test case, `send-L_toggle`, is added, which tests the "no-L to -L"
case and verifies that we get an error for the "-L to no-L" case.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes  
Closes 
2020-06-09 10:41:01 -07:00
Paul Dagnelie b2f3709c3e
Don't erase final byte of envblock
When we copy the envblock's contents out, we currently treat it as 
a normal C string. However, this functionality is supposed to more
closely emulate interacting with a file. As a consequence, we were 
incorrectly truncating the contents of the envblock by replacing 
the final byte of the buffer with a null character.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes 
2020-06-08 08:58:13 -07:00
Ryan Moeller 60265072e0
Improve compatibility with C++ consumers
C++ is a little picky about not using keywords for names, or string
constness.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-06-06 12:54:04 -07:00
наб a1ba120927 Always use "%lld" for formatting time_ts
Given the following test program:
  #include <time.h>
  #include <stdio.h>
  #include <stdint.h>
  int main() {
    printf("time_t:    %d\n", sizeof(time_t));
    printf("long:      %d\n", sizeof(long));
    printf("long long: %d\n", sizeof(long long));
  }

These are output on various x86 architectures:
  x32$   time_t:    8
  x32$   long:      4
  x32$   long long: 8

  amd64$ time_t:    8
  amd64$ long:      8
  amd64$ long long: 8

  i386$  time_t:    4
  i386$  long:      4
  i386$  long long: 8

Therefore code using "%l[du]" to format time_ts produced warnings on x32

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@gmail.com>
Closes 
Closes 
2020-05-28 10:29:58 -07:00
John Gallagher 50ff632787
Rework error handling in zpool_trim()
When a manual trim is run against an entire pool, errors about
particular devices which don't support trim are suppressed. This changes
zpool_trim() in libzfs so that it doesn't return an error when the only
errors are suppressed ones. An exception is made when none of the
devices support trim, in which case an error is reported and a non-zero
status is returned.

This also fixes how the --wait flag works in the presence of suppressed
errors. In particular, suppressed errors no longer cause zpool_trim()
to skip the wait.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes  
Closes 
2020-05-27 17:27:28 -07:00
felixdoerre 501a1511ae
mount: use the mount syscall directly
Allow zfs datasets to be mounted on Linux without relying on the
invocation of an external processes.  This is the same behavior
which is implemented for FreeBSD.

Use of the libmount library was originally considered because it 
provides functionality to properly lock and update the /etc/mtab 
file.  However, these days /etc/mtab is typically a symlink to 
/proc/self/mounts so there's nothing to updated.  Therefore, we
call mount(2) directly and avoid any additional dependencies. 

If required the legacy behavior can be enabled by setting the 
ZFS_MOUNT_HELPER environment variable.  This may be needed in
environments where SELinux in enabled and the zfs binary does  
not have mount permission.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Felix Dörre <felix@dogcraft.de>
2020-05-20 18:02:41 -07:00