The common.sh script assumed that it was either being run from
in-tree or was installed under /usr/libexec/zfs. If this was
not the case, because of say the default --prefix=/usr/local,
then the paths would be wrong. To fix this common.sh is now
generated from common.sh.in with the correct path information
provided at configure time.
The long term fix for Debian and Slackware style packaging is
to add native support for building these packages. Unfortunately,
that is a large chunk of work I don't have time for right now.
That said it would be nice to have at least basic packages for
these distributions.
As a quick short/medium term solution I've settled on using alien
to convert the RPM packages to DEB or TGZ style packages. The
build system has been updated with the following build targets
which will first build RPM packages and then convert them as
needed to the target package type:
make rpm: Create .rpm packages
make deb: Create .deb packages
make tgz: Create .tgz packages
make pkg: Create the right package type for your distribution
The solution comes with lot of caveats and your mileage may vary.
But basically the big limitations are that the resulting packages:
1) Will not have the correct dependency information.
2) Will not include the kernel version in the release.
3) Will not handle all differences between distributions.
But the resulting packages should be easy to install and remove
from your system and take care of running 'depmod -a' and such.
As I said at the top this is not the right long term solution.
If any of the upstream distribution maintainers want to jump in
and help do this right for their distribution I'd love the help.
The cleanest way to do this is to set AM_LIBTOOLFLAGS = --silent. However,
AM_LIBTOOLFLAGS is not honored by automake-1.9.6-2.1 which is what I have
been using. To cleanly handle this I am updating to automake-1.11-3 which
is why it looks like there is a lot of churn in the Makefiles.
We need dependent packages to be able to include zfs_config.h to
build properly. This was partially solved previously be using
AH_BOTTOM to #undef common #defines (PACKAGE, VERSION, etc) which
autoconf always adds and cannot be easily removed. This solution
works as long as the zfs_config.h is included before your projects
config.h. That turns out to be easier said than done. In particular,
this is a problem when your package includes its config.h using the
-include gcc option which ensures the first thing included is your
config.h.
To handle all cases cleanly I have removed the AH_BOTTOM hack and
replaced it with an AC_CONFIG_HEADERS command. This command runs
immediately after zfs_config.h is written and with a little awk-foo
it strips the offending #defines from the file. This eliminates
the problem entirely and makes header safe for inclusion.
While I completely agree the udev is the lesser of many possibles
evils when solving the device issue... it is still evil. After
attempting to craft a single rule which will work for various
versions of udev in various distros. I've come to the conclusion
the only maintainable way to solve this issue is to split the rule
from any particular configuration.
This commit provides a generic 60-zpool.rules file which use a
small helper util 'zpool_id' to parse a configuration file by
default located in /etc/zfs/zdev.conf. The helper script maps
a by-path udev name to a more friendly name of <channel><rank>
for large configurations.
As part of this change all of the support scripts why rely on
this udev naming convention have been updated as needed. Example
zdev.conf files have also been added for 3 different systems by
you will always need to add one for your exact hardware.
Finally, included in these changes are the proper tweaks to the
build system to ensure everything still get's packaged properly
in the rpms and can run in or out of tree.
This change extends the existing in-tree test infrastructure such
that it can also be run as part of a the installed package. This
simplifies testing on multiple systems and is generally all around
useful. The scripts may still be run in-tree and will use the
in-tree build products as long as .script-config exists.
Futher testing on my powerpc system revealed that the powerpc
specific atomic implemetation was flawed. Rather than spending
a lot of time correctly reimplementing it in assembly I have
reworked it in to a 100% generic version. The generic version
will not perform well but it does provide correct sematics. It
will be used only when there is no architecture specific version
available. These changes do not impact x86_64 and x86 which have
have correct native implementations.
These changes bring the zfs-0.4.4 tree in to compliance with
the spl-0.4.4 packaging changes. The bottom line is 2 source
rpms and 4 binary rpms will now be generated when creating
packages there will be:
zfs-<version>.src.rpm
- Fully rebuildable source rpm for libzfs and utils.
zfs-modules-<version>.src.rpm
- Fully rebuildable source rpm for kernel modules.
zfs-<version>.<arch>.rpm
- Binary rpm for libzfs and utils. The utils in this package are
compatible with all zfs-module rpms of the same version.
zfs-devel-<version>.<arch>.rpm
- Binary rpm containing headers for building against libzfs libraries.
zfs-modules-<verion>-<kernel>.arch.rpm
- Binary rpm containing the kernel modules for a specific kernel build.
The package name contains the kernel version and you should have one
of these packages installed to match every kernel on your system.
zfs-modules-devel-<verion>-<kernel>.arch.rpm
- Binary rpm containing development header and module symbols needed
for building additional kernel modules which are dependent on the
zfs module stack.
Expect minor interations on these changes as I validate they work
properly on CHAOS, RHEL, Fedora, and SLES style distros.
- Add 64-bit user space atomic support obtained from an old version
of OpenSolaris which supported ppc. They are not all 100% fully
implemented by they are a good first step.
- Add powerpc ISA type.
- Strip out unused ISA defines to prevent any confusion.
Depending on your x86 architecture $target_cpu can evaluate to
any of the following (i386|i486|i586|i686). Since our local asm
uses only i386 instructions sed is used to map all of these to
i386 and sets $target_arch. Other arch's are not impacted.
An update to the build system to properly support all commonly
used Makefile targets these include:
make all # Build everything
make install # Install everything
make clean # Clean up build products
make distclean # Clean up everything
make dist # Create package tarball
make srpm # Create package source RPM
make rpm # Create package binary RPMs
make tags # Create ctags and etags for everything
Extra care was taken to ensure that the source RPMs are fully
rebuildable against Fedora/RHEL/Chaos kernels. To build binary
RPMs from the source RPM for your system simply run:
rpmbuild --rebuild zfs-x.y.z-1.src.rpm
This will produce two binary RPMs with correct 'requires'
dependencies for your kernel. One will contain all zfs modules
and support utilities, the other is a devel package for compiling
additional kernel modules which are dependant on the zfs.
zfs-x.y.z-1_<kernel version>.x86_64.rpm
zfs-devel-x.y.2-1_<kernel version>.x86_64.rpm
Brian Behlendorf