In FreeBSD the struct uio was just a typedef to uio_t. In order to
extend this struct, outside of the definition for the struct uio, the
struct uio has been embedded inside of a uio_t struct.
Also renamed all the uio_* interfaces to be zfs_uio_* to make it clear
this is a ZFS interface.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#11438
The original xuio zero copy functionality has always been unused
on Linux and FreeBSD. Remove this disabled code to avoid any
confusion and improve readability.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#11124
When you create a pool, zfs writes vd->vdev_enc_sysfs_path with the
enclosure sysfs path to the fault LEDs, like:
vdev_enc_sysfs_path = /sys/class/enclosure/0:0:1:0/SLOT8
However, this enclosure path doesn't get updated on successive imports
even if enclosure path to the disk changes. This patch fixes the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#11950Closes#12095
Also always free tmp2 at the end
Before:
nabijaczleweli@tarta:~/uwu$ valgrind --leak-check=full ./blergh
==8947== Memcheck, a memory error detector
==8947== Using Valgrind-3.14.0 and LibVEX
==8947== Command: ./blergh
==8947==
(null)
==8947==
==8947== HEAP SUMMARY:
==8947== in use at exit: 23 bytes in 1 blocks
==8947== total heap usage: 3 allocs, 2 frees, 1,147 bytes allocated
==8947==
==8947== 23 bytes in 1 blocks are definitely lost in loss record 1 of 1
==8947== at 0x483577F: malloc (vg_replace_malloc.c:299)
==8947== by 0x48D74B7: vasprintf (vasprintf.c:73)
==8947== by 0x48B7833: asprintf (asprintf.c:35)
==8947== by 0x401258: zfs_get_enclosure_sysfs_path
(zutil_device_path_os.c:191)
==8947== by 0x401482: main (blergh.c:107)
==8947==
==8947== LEAK SUMMARY:
==8947== definitely lost: 23 bytes in 1 blocks
==8947== indirectly lost: 0 bytes in 0 blocks
==8947== possibly lost: 0 bytes in 0 blocks
==8947== still reachable: 0 bytes in 0 blocks
==8947== suppressed: 0 bytes in 0 blocks
==8947==
==8947== For counts of detected and suppressed errors, rerun with: -v
==8947== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
nabijaczleweli@tarta:~/uwu$ sed -n 191p zutil_device_path_os.c
tmpsize = asprintf(&tmp1, "/sys/block/%s/device", dev_name);
After:
nabijaczleweli@tarta:~/uwu$ valgrind --leak-check=full ./blergh
==9512== Memcheck, a memory error detector
==9512== Using Valgrind-3.14.0 and LibVEX
==9512== Command: ./blergh
==9512==
(null)
==9512==
==9512== HEAP SUMMARY:
==9512== in use at exit: 0 bytes in 0 blocks
==9512== total heap usage: 3 allocs, 3 frees, 1,147 bytes allocated
==9512==
==9512== All heap blocks were freed -- no leaks are possible
==9512==
==9512== For counts of detected and suppressed errors, rerun with: -v
==9512== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11993
A multpathed disk will have several 'underlying' paths to the disk. For
example, multipath disk 'dm-0' may be made up of paths:
/dev/{sda,sdb,sdc,sdd}. On many enclosures those underlying sysfs
paths will have a symlink back to their enclosure device entry
(like 'enclosure_device0/slot1'). This is used by the
statechange-led.sh script to set/clear the fault LED for a disk, and
by 'zpool status -c'.
However, on some enclosures, those underlying paths may not all have
symlinks back to the enclosure device. Maybe only two out of four
of them might.
This patch updates zfs_get_enclosure_sysfs_path() to favor returning
paths that have symlinks back to their enclosure devices, rather
than just returning the first path.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#11617
Starting in Linux 5.10, trying to write to /dev/{null,zero} errors out.
Prefer to inform people when this happens rather than hoping they guess
what's wrong.
Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes: #11991
As of the Linux 5.9 kernel a fallthrough macro has been added which
should be used to anotate all intentional fallthrough paths. Once
all of the kernel code paths have been updated to use fallthrough
the -Wimplicit-fallthrough option will because the default. To
avoid warnings in the OpenZFS code base when this happens apply
the fallthrough macro.
Additional reading: https://lwn.net/Articles/794944/
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12441
In the current world, `zfs diff` will die on certain kinds of errors
that come up on ordinary, not-mangled filesystems - like EINVAL,
which can come from a file with multiple hardlinks having the one
whose name is referenced deleted.
Since it should always be safe to continue, let's relax about all
error codes - still print something for most, but don't immediately
abort when we encounter them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12072
Callers of zfs_file_get and zfs_file_put can corrupt the reference
counts for the file structure resulting in a panic or a soft lockup.
When zfs send/recv runs, it will add a reference count to the
open file, and begin to send or recv the stream. If the file descriptor
is closed, then when dmu_recv_stream() or dmu_send() return we will
call zfs_file_put to remove the reference we placed on the file
structure. Unfortunately, because zfs_file_put() uses the file
descriptor to lookup the file structure, it may end up finding that
the file descriptor table no longer contains the file struct, thus
leaking the file structure. Or it might end up finding a file
descriptor for a different file and blindly updating its reference
counts. Other failure modes probably exists.
This change reworks the zfs_file_[get|put] interface to not rely
on the file descriptor but instead pass the zfs_file_t pointer around.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
External-issue: DLPX-76119
Closes#12299
In order for cppcheck to perform a proper analysis it needs to be
aware of how the sources are compiled (source files, include
paths/files, extra defines, etc). All the needed information is
available from the Makefiles and can be leveraged with a generic
cppcheck Makefile target. So let's add one.
Additional minor changes:
* Removing the cppcheck-suppressions.txt file. With cppcheck 2.3
and these changes it appears to no longer be needed. Some inline
suppressions were also removed since they appear not to be
needed. We can add them back if it turns out they're needed
for older versions of cppcheck.
* Added the ax_count_cpus m4 macro to detect at configure time how
many processors are available in order to run multiple cppcheck
jobs. This value is also now used as a replacement for nproc
when executing the kernel interface checks.
* "PHONY =" line moved in to the Rules.am file which is included
at the top of all Makefile.am's. This is just convenient becase
it allows us to use the += syntax to add phony targets.
* One upside of this integration worth mentioning is it now allows
`make cppcheck` to be run in any directory to check that subtree.
* For the moment, cppcheck is not run against the FreeBSD specific
kernel sources. The cppcheck-FreeBSD target will need to be
implemented and testing on FreeBSD to support this.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11508
Receiving datasets while blanket inheriting properties like zfs
receive -x mountpoint can generally be desirable, e.g. to avoid
unexpected mounts on backup hosts.
Currently this will fail to receive zvols due to the mountpoint
property being applicable to filesystems only. This limitation
currently requires operators to special-case their minds and tools
for zvols.
This change gets rid of this limitation for inherit (-x) by
Spiting up the dataset type handling: Warnings for inheriting (-x),
errors for overriding (-o).
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes#11416Closes#11840Closes#11864
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11886
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11886
zfs_crypto_load_key() only works on encryption roots,
and zfs mount -la would fail if it encounters a datasets that
is sorted before their encroots.
To trigger:
truncate -s 40G /tmp/test
dd if=/dev/urandom of=/tmp/k bs=128 count=1 status=none
zpool create -O encryption=on -O keylocation=file:///tmp/k \
-O keyformat=passphrase test /tmp/test
zfs create -o mountpoint=/a test/a
zfs create -o mountpoint=/b test/b
zfs umount test
zfs unload-key test
zfs mount -la
The final mount errored out with:
Key load error: Keys must be loaded for
encryption root of 'test/a' (test).
Key load error: Keys must be loaded for
encryption root of 'test/b' (test).
And only /test was mounted
This technically breaks the libzfs API, but the previous behavior was
decidedly a bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11870Closes#11875
These were fd 3, 4, and 5 by the time zfs change-key hit
execute_key_fob()
glibc appends "e" to setmntent() mode, but musl's just returns fopen()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11866
This changes the password prompt for new encryption roots from
Enter passphrase:
Re-enter passphrase:
to
Enter new passphrase:
Re-enter new passphrase:
which makes more sense and is more consistent with "new passphrase"
now always meaning "come up with something" and plain "passphrase"
"remember that thing"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11866
get_clones_string currently returns an empty string for filesystem
snapshots which have no clones. This breaks parsable `zfs get` output as
only three columns are output, instead of 4.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Fiddaman <github@m.fiddaman.uk>
Co-authored-by: matt <matt@fiddaman.net>
Closes#11837
zpool list, which is the only user, would mistakenly try to parse the
empty string as the interval in this case:
$ zpool list "a"
cannot open 'a': no such pool
$ zpool list ""
interval cannot be zero
usage: <usage string follows>
which is now symmetric with zpool get:
$ zpool list ""
cannot open '': name must begin with a letter
Avoid breaking the "interval cannot be zero" string.
There simply isn't a need for this, and it's user-facing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11841Closes#11843
Importing a pool using the cachefile is ideal to reduce the time
required to import a pool. However, if the devices associated with
a pool in the cachefile have changed, then the import would fail.
This can easily be corrected by doing a normal import which would
then read the pool configuration from the labels.
The goal of this change is make importing using a cachefile more
resilient and auto-correcting. This is accomplished by having
the cachefile import logic automatically fallback to reading the
labels of the devices similar to a normal import. The main difference
between the fallback logic and a normal import is that the cachefile
import logic will only look at the device directories that were
originally used when the cachefile was populated. Additionally,
the fallback logic will always import by guid to ensure that only
the pools in the cachefile would be imported.
External-issue: DLPX-71980
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#11716
Avoid following the error path when the operation in fact succeeded.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: James Wah <james@laird-wah.net>
Closes#11651
The behavior of a NULL fromsnap was inadvertently changed for a doall
send when the send/recv logic in libzfs was updated. Restore the
previous behavior by correcting send_iterate_snap() to include all
the snapshots in the nvlist for this case.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Cedric Maunoury <cedric.maunoury@gmail.com>
Closes#11608
Without this patch I get the error
Setting global variables is only supported on little-endian systems
when using `zdb -o` on my amd64 machine.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#11602
Need to destroy the pthread mutex created in uu_avl_pool_create.
https://svnweb.freebsd.org/base?view=revision&revision=262912
Obtained from: FreeBSD
Sponsored by: Spectra Logic Corporation
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#11528
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#11458
`zpool create -n` fails to list cache and spare vdevs.
`zpool add -n` fails to list spare devices.
`zpool split -n` fails to list `special` and `dedup` labels.
`zpool add -n` and `zpool split -n` shouldn't list hole devices.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#11122Closes#11167
In `zpool_find_config()`, the `pools` nvlist is leaked. Part of it (a
sub-nvlist) is returned in `*configp`, but the callers also leak that.
Additionally, in `zdb.c:main()`, the `searchdirs` is leaked.
The leaks were detected by ASAN (`configure --enable-asan`).
This commit resolves the leaks.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#11396
As of the 5.10 kernel the generic splice compatibility code has been
removed. All filesystems are now responsible for registering a
->splice_read and ->splice_write callback to support this operation.
The good news is the VFS provided generic_file_splice_read() and
iter_file_splice_write() callbacks can be used provided the ->iter_read
and ->iter_write callback support pipes. However, this is currently
not the case and only iovecs and bvecs (not pipes) are ever attached
to the uio structure.
This commit changes that by allowing full iov_iter structures to be
attached to uios. Ever since the 4.9 kernel the iov_iter structure
has supported iovecs, kvecs, bvevs, and pipes so it's desirable to
pass the entire thing when possible. In conjunction with this the
uio helper functions (i.e uiomove(), uiocopy(), etc) have been
updated to understand the new UIO_ITER type.
Note that using the kernel provided uio_iter interfaces allowed the
existing Linux specific uio handling code to be simplified. When
there's no longer a need to support kernel's older than 4.9, then
it will be possible to remove the iovec and bvec members from the
uio structure and always use a uio_iter. Until then we need to
maintain all of the existing types for older kernels.
Some additional refactoring and cleanup was included in this change:
- Added checks to configure to detect available iov_iter interfaces.
Some are available all the way back to the 3.10 kernel and are used
when available. In particular, uio_prefaultpages() now always uses
iov_iter_fault_in_readable() which is available for all supported
kernels.
- The unused UIO_USERISPACE type has been removed. It is no longer
needed now that the uio_seg enum is platform specific.
- Moved zfs_uio.c from the zcommon.ko module to the Linux specific
platform code for the zfs.ko module. This gets it out of libzfs
where it was never needed and keeps this Linux specific code out
of the common sources.
- Removed unnecessary O_APPEND handling from zfs_iter_write(), this
is redundant and O_APPEND is already handled in zfs_write();
NOTE: Cleanly applying this kernel compatibility change required
applying the following commits. This makes the change larger than
it absolutely needs to be, but the resulting code matches what's in
the branch branch. This is both more tested and makes it easier to
apply any future backports in this area.
7cf4cd824 Remove incorrect assertion
783be694f Reduce confusion in zfs_write
af5626ac2 Return EFAULT at the end of zfs_write() when set
cc1f85be8 Simplify offset and length limit in zfs_write
9585538d0 Const some unchanging variables in zfs_write
86e74dc16 Remove redundant oid parameter to update_pages
b3d723fb0 Factor uid, gid, and projid out of loop in zfs_write
3d40b6554 Share zfs_fsync, zfs_read, zfs_write, et al between Linux and FreeBSD
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11351
The zfs_fsync, zfs_read, and zfs_write function are almost identical
between Linux and FreeBSD. With a little refactoring they can be
moved to the common code which is what is done by this commit.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#11078
Building libzfs with gcc on FreeBSD failed because gcc is picky about
the order of keywords in declarations with __thread, whereas clang is
more relaxed.
https://gcc.gnu.org/onlinedocs/gcc/Thread-Local.html
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Closes#11331
We do not build libnvpair.pc. Moreover, it is automatically pulled in
by libzfs.pc, so no additional specific dependency is required.
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes#11227
The ABI should be included when generating the `make dist` tarball
since it's required by the `make checkabi` target.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11225
Add a snapshot of the OpenZFS 2.0 ABI using libabigail-1.7-2.
The included ABI passes `make checkabi` for CentOS 7, Fedora 33,
Debian 10, and Ubuntu 20.04. This covers a fairly wide range
of glibc, gcc, and libabigail versions plus other changes which
are platform specific.
Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11144
Provide two make targets: checkabi and storeabi.
storeabi uses libabigail to generate a reference copy of the ABI for the
public libraries.
checkabi compares such a reference to the compiled version, failing if
they are not compatible. No ABI is generated for libzpool.so, it is
only used by ztest and zdb and not external consumers.
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes#11144
zpool_expand_proplist() now ignores pl_fixed if its new literal
argument is true. The rest is a consequence of needing to pass
that down.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiao?=~Dska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11202
This shows up when compiling freebsd-head on amd64 using gcc-6.4.
The lib32 compat build ends up tripping over this assumption.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: adrian chadd <adrian@freebsd.org>
Closes#11068Closes#11069
Bump library SOVERSION under Linux to match FreeBSD's.
Additionally, this bump properly accounts for the ABI changes relative
to ZoL 0.8.5 for the Linux build.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Issue #11144
Refer to the correct section or alternative for FreeBSD and Linux.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11132
The acltype property is currently hidden on FreeBSD and does not
reflect the NFSv4 style ZFS ACLs used on the platform. This makes it
difficult to observe that a pool imported from FreeBSD on Linux has a
different type of ACL that is being ignored, and vice versa.
Add an nfsv4 acltype and expose the property on FreeBSD.
Make the default acltype nfsv4 on FreeBSD.
Setting acltype to an unhanded style is treated the same as setting
it to off. The ACLs will not be removed, but they will be ignored.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10520
In FreeBSD, there are three compile environments that are supported:
user land, the kernel and the bootloader / standalone. Adjust the
headers to compile in the standalone environment. Limit kernel-only
items from view when _STANDALONE is defined.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Warner Losh <imp@FreeBSD.org>
Closes#10998
It is a common mistake to have failed to autoload the module due to
permission issues when running a ZFS command as a user. "Operation
not permitted" is an unhelpfully vague error message.
Use a thread-local message buffer to format a nicer error message.
We can infer that loading the kernel module failed if the module is
not loaded. This can be extended with heuristics for other errors
in the future.
While looking at this stuff, remove an unused thread-local message
buffer found in libspl and remove some inaccurate verbiage from the
comment on libzfs_load_module.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11033
This change updates the documentation to refer to the project
as OpenZFS instead ZFS on Linux. Web links have been updated
to refer to https://github.com/openzfs/zfs. The extraneous
zfsonlinux.org web links in the ZED and SPL sources have been
dropped.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11007
fixup of 196bee4
On gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), the code removed
caused `-Wmaybe-uninitialized` errors.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#11021
When resuming an interrupted ZFS send stream that creates a new dataset
with the same name as an existing dataset, if the existing dataset is
accessed after the failed receive, then after the subsequent successful
receive it will return EIO. This happens because nothing mounts the new
dataset, leaving the old, no longer valid dataset still mounted.
This commit fixes zfs receive to always unmount and remount the
destination, regardless of whether the stream is a new stream or a
resumed stream.
Sponsored by: Axcient
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
External-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=249579Closes#10995Closes#10999
If the /etc/exports.d directory does not exist, then we should only
create it when we're performing an action which already requires root
privileges.
This commit moves the directory creation to the enable/disable code
path which ensures that we have the appropriate privileges.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#10785Closes#10934
The procfs_list interface is required by several kstats. Implement
this functionality for FreeBSD to provide access to these kstats.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10890
Brian Atkinson
Matthew Macy
Tony Hutter
наб
Rich Ercolani
Brian Behlendorf
George Wilson
Prawn
matt-fidd
James Wah
Cedric Maunoury
Christian Schwarz
Ryan Moeller
Alan Somers
Matt Macy
Attila Fülöp
Matthew Ahrens
Ryan Libby
Antonio Russo
Adrian Chadd
Warner Losh
Alan Somers
Allan Jude