A lot of string replacement target don't have dependency or incorrect
dependency. We setup proper dependency by pattern rules.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4908
* Disable zfs-import-scan.service by default. This ensures that
pools will not be automatically imported unless they appear in
the cache file. When this service is explicitly enabled pools
will be imported with the "cachefile=none" property set. This
prevents the creation of, or update to, an existing cache file.
$ systemctl list-unit-files | grep zfs
zfs-import-cache.service enabled
zfs-import-scan.service disabled
zfs-mount.service enabled
zfs-share.service enabled
zfs-zed.service enabled
zfs.target enabled
* Change services to dynamic from static by adding an [Install]
section and adding 'WantedBy' tags in favor of 'Requires' tags.
This allows for easier customization of the boot behavior.
* Start the zfs-import-cache.service after the root pivot so
the cache file is available in the standard location.
* Start the zfs-mount.service after the systemd-remount-fs.service
to ensure the root fs is writeable and the ZFS filesystems can
create their mount points.
* Change the default behavior to only load the ZFS kernel modules
in zfs-import-*.service or when blkid(8) detects a pool. Users
who wish to unconditionally load the kernel modules must uncomment
the list of modules in /lib/modules-load.d/zfs.conf.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4325Closes#4496Closes#4658Closes#4699
- In older systems without sysroot.mount, import before dracut-mount,
and re-enable old dracut mount hook
- rootflags MUST be present even if the administrator neglected to
specify it explicitly
- Check that mount.zfs exists in sbindir
- Remove awk and head as (now unused) requirements, add grep, and
install the right mount.zfs
- Eliminate one use of grep in Dracut
- Use a more accurate grepping statement to identify zfsutil in rootflags
- Ensure that pooldev is nonempty
- Properly handle /dev/sd* devices and more
- Use new -P to get list of zpool devices
- Bail out of the generator when zfs:AUTO is on the root command line
- Ignore errors from systemctl trying to load sysroot.mount, we only
care about the output
- Determine which one is the correct initqueuedir at run time.
- Add a compatibility getargbool for our detection / setup script.
- Update dracut .gitignore files
Signed-off-by: <Matthew Thode mthode@mthode.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4558Closes#4562
Both Alpine Linux and Gentoo use OpenRC so we share its logic
Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4386
Debian based systems use nfs-kernel-server as the service name.
List both nfs-server.service and nfs-kernel-server.service so
this service will work on multiple distributions.
Signed-off-by: Grischa Zengel <github.zfsonlinux@zengel.info>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4350
This change modifies the import service to use the default cache file
to perform a verbatim import of pools at boot. This fixes code that
searches all devices and imported all visible pools.
Using the cache file is in keeping with the way ZFS has always worked,
how Solaris, Illumos, FreeBSD, and systemd performs imports, and is how
it is written in the man page (zpool(1M,8)):
All pools in this cache are automatically imported when the
system boots.
Importantly, the cache contains important information for importing
multipath devices, and helps control which pools get imported in more
dynamic environments like SANs, which may have thousands of visible
and constantly changing pools, which the ZFS_POOL_EXCEPTIONS variable
is not equipped to handle. Verbatim imports prevent rogue pools from
being automatically imported and mounted where they shouldn't be.
The change also stops the service from exporting pools at shutdown.
Exporting pools is only meant to be performed explicitly by the
administrator of the system.
The old behavior of searching and importing all visible pools is
preserved and can be switched on by heeding the warning and toggling
the ZPOOL_IMPORT_ALL_VISIBLE variable in /etc/default/zfs.
Signed-off-by: James Lee <jlee@thestaticvoid.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3777Closes#3526
For consistency all systemd unit files and init scripts now share
the same names. This prevents an issue where the zed is started
twice on systems where both the systemd and sysv infrastructure is
installed concurrently.
For backward compatibility a 'zed' alias has been added. This
allows the user to interact with the service using either the
name 'zed' or 'zfs-zed'.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3837
* Fix regression - "OVERLAY_MOUNTS" should have been "DO_OVERLAY_MOUNTS".
* Fix update-rc.d commands in postinst. Thanx to subzero79@GitHub.
* Fix make sure a filesystem exists before trying to mount in mount_fs()
* Fix local variable usage.
* Fix to read_mtab():
* Strip control characters (space - \040) from /proc/mounts GLOBALY,
not just first occurrence.
* Don't replace unprintable characters ([/-. ]) for use in the variable
name with underscore. No need, just remove them all together.
* Add check_boolean() to check if a user configure option is
set ('yes', 'Yes', 'YES' or any combination there of) OR '1'.
Anything else is considered 'unset'.
* Add a ZFS_POOL_IMPORT to the default config.
* This is a semi colon separated list of pools to import ONLY.
* This is intended for systems which have _a lot_ of pools (from
a SAN for example) and it would be to many to put in the
ZFS_POOL_EXCEPTIONS variable..
* Add a config option "ZPOOL_IMPORT_OPTS" for adding additional options
to "zpool import".
* Add documentation and the chance of overriding the ZPOOL_CACHE
variable in the config file.
* Remove "sort" from find_pools() and setup_snapshot_booting().
Sometimes not available, and not really necessary.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #3816
Resolve the following error when restarting the zed by force creating
the /run/sendsigs.omit.d/zed link.
sudo /etc/init.d/zfs-zed restart
* Stopping ZFS Event Daemon [ OK ]
* Starting ZFS Event Daemon
ln: failed to create symbolic link `/run/sendsigs.omit.d/zed': File exists
Signed-off-by: SenH <sen@senhaerens.be>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3747
ZED depends on /var. When /var is a separate dataset, it must be
mounted before starting ZED. This change moves the zfs-zed service
from starting first, to starting after zfs-mount, but before zfs-share.
As discussed in issue #3513, ZED does not need to start first in order
to consume events made during the zfs-import and zfs-mount services.
The events will be queued and can be handled later in the boot process.
ZED may, however, handle sharing in the future, so it should be started
before the zfs-share service.
This commit also stops the zfs-import service from writing temp files
to /var/tmp on shutdown and it corrects the return code for the OpenRC
service.
Other OpenRC-specific changes noted in issue #3513 were reitereated in
issue #3715 and committed in da619f3.
Signed-off-by: James Lee <jlee@thestaticvoid.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3513
The dependencies for handling / on ZFS belong in the mount script, not
the zed script.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3715
This is some minor fixes to commits 2cac7f5f11
and 2a34db1bdb.
* Make sure to alien'ate the new initramfs rpm package as well!
The rpm package is build correctly, but alien isn't run on it to
create the deb.
* Before copying file from COPY_FILE_LIST, make sure the DESTDIR/dir exists.
* Include /lib/udev/vdev_id file in the initrd.
* Because the initrd needs to use '/sbin/modprobe' instead of 'modprobe',
we need to use this in load_module() as well.
* Make sure that load_module() can be used more globaly, instead of
calling '/sbin/modprobe' all over the place.
* Make sure that check_module_loaded() have a parameter - module to
check.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3626
Build products from an out of tree build should be written
relative to the build directory. Sources should be referred
to by their locations in the source directory.
This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile. This enables the following:
$ mkdir build
$ cd build
$ ../configure \
--with-spl=$HOME/src/git/spl/ \
--with-spl-obj=$HOME/src/git/spl/build
$ make -s
This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.
Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
Makefile.am:00: but option 'subdir-objects' is disabled
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1082
This is especially needed when using LUKS backed pools.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3536
* In read_mtab(), fix problems (!?) in the mounts file. It will record
'rpool 1' as 'rpool\0401' instead of 'rpool\00401' which seems to be the
correct (at least as far as 'printf' is concerned). Use this using the
external 'echo' command (and not the one built in to the shell) because
the internal one would interpret the backslash code (incorrectly), giving
us a instead.
* Remove reregister_mounts() - no longer needed.
* For Gentoo, the zfs_log_failure_msg() should use eend(), not eerror()
(which requires an error message, which we don't have).
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3488Closes#3509Closes#3514
This reverts commit 036391c980.
Because #3509 came just after this commit was accepted and is related
to the original problem the commit was supposed to fix, we need to
solve the problem in another way.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Use the 'mount' command instead of /proc/mounts to get a list of matching
filesystems.
This because /proc/mounts reports a pool with a space 'rpool 1' as
'rpool\0401'. The space is encoded as 3-digit octal which is legal.
However 'printf "%b"', which we use to filter out other illegal
characters (such as slash, space etc) can't properly interpret this
because it expects 4-digit octal. We get a instead of the space
we expected. The correct value should have been 'rpool\00401' (note
the additional leading zero).
So use 'mount', which interprets all backslash-escapes correctly,
instead.
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3488
* Change the order of the function library check/load.
Redhat based system _can_ have a /lib/lsb/init-functions file (from
the redhat-lsb-core package), but it's only partially what we can use.
Instead, look for that file last, giving the script a chance to catch
the 'real' distribution file.
* Filter out dashes and dots in dataset name in read_mtab().
* Get rid of 'awk' entirely. This is usually in /usr, which might not
be availible.
* Get rid of the 'find /dev/disk/by-*' (find is on /usr, which might not
be availible). Instead use echo in a for loop.
* Rebuild scripts if any of the *.in files changed.
* Move the sed part that filters out duplicates inside the check fo
valid variable.
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3463Closes#3457
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes#2974Closes#2107
Commit 87abfcb broke the systemd import service by treating the
ExecStart line as if it were a shell command that could be executed.
This isn't the way systemd works and the correct way to handle this
case is with ExecStartPre. This patch updates the zfs import service
files accordingly,
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Chris Siebenmann <cks.git01@cs.toronto.edu>
Closes#3440
While module loading itself is synchronous the creation of the /dev/zfs
device is not. This is because /dev/zfs is typically created by a udev
rule after the module is registered and presented to user space through
sysfs. This small window between module loading and device creation
can result in spurious failures of libzfs_init().
This patch closes that race by extending libzfs_init() so it can detect
that the modules are loaded and only if required wait for the /dev/zfs
device to be created. This allows scripts to reliably use the following
shell construct without the need for additional error handling.
$ /sbin/modprobe zfs && /sbin/zpool import -a
To minimize the potential time waiting in libzfs_init() a strategy
similar to adaptive mutexes is employed. The function will busy-wait
for up to 10ms based on the expectation that the modules were just
loaded and therefore the /dev/zfs will be created imminently. If it
takes longer than this it will fall back to polling for up to 10 seconds.
This behavior can be customized to some degree by setting the following
new environment variables. This functionality is provided for backwards
compatibility with existing scripts which depend on the module auto-load
behavior. By default module auto-loading is now disabled.
* ZFS_MODULE_LOADING="YES|yes|ON|on" - Attempt to load modules.
* ZFS_MODULE_TIMEOUT="<seconds>" - Seconds to wait for /dev/zfs
The zfs-import-* systemd service files have been updated to call
'/sbin/modprobe zfs' so they no longer rely on the legacy auto-loading
behavior.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#2556
The resulting script is not removed by 'make clean' or rebuilt
when the source files are changed. Users with long standing git
trees may find their init script is out of date.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3273
This commit updates the zfs.redhat.in script to start/stop ZED.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3153
This commit replaces the zfs.redhat.in init script with a slightly
modified version of the existing zfs.lsb.in init script. This was
done to minimize the functional differences between platforms.
The lsb version of the script was choosen because it's heavily
tested and provides the most functionality.
Changes made for RHEL systems:
* Configuration: /etc/default/zfs -> /etc/sysconfig/zfs
* LSB functions: /lib/lsb/init-functions -> /etc/rc.d/init.d/functions
* Logging: log_begin_msg/log_end_msg -> action
Features in LSB which are now in RHEL:
* USE_DISK_BY_ID=0 - Use the by-id names
* VERBOSE_MOUNT=0 - Verbose mounts by default
* DO_OVERLAY_MOUNTS=0 - Overlay mounts by default
* MOUNT_EXTRA_OPTIONS=0 - Generic extra options
Existing RHEL features which were removed:
* Automatically mounting FSs on ZVOLs listed in /etc/fstab
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3153
The systemd script zfs-share.service does 'zfs share -a' to share
any required datasets. Unfortunately, /etc/dfs/sharetab is stale
from the previous boot. Delete it before we share.
Signed-off-by: Dan Swartzendruber <dswartz@druber.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2883
The zfs-share.service rule needs to be modified to ensure that it
does not execute before zfs-mount.service.
Signed-off-by: Dan Swartzendruber <dswartz@druber.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ralf Ertzinger <ralf@skytale.net>
Closes#2893
The zfs-import-cache.service and zfs-import-scan.service should
should be started after cryptsetup to ensure all LUKS devices have
been opened.
Signed-off-by: alteriks <alteriks@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1474
Change the startup mode of ZED to non-forking. While systemd can
track processes that detach from the terminal just fine, running
processes in non-forking mode is the preferred mode of operation.
Also remove user/group definitions as root/root is the default.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2252
This commit adds a systemd unit file for zed.service and integrates
it into the zfs.target from commit 881f45c.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2108
Issue #2
p_l in #zfsonlinux reported that he had issues mounting filesystems that
were resolved by adding rc_need="mtab" to /etc/init.d/zfs. Closer
inspection revealed that we do have a race, but it is not clear how this
race caused mounting to fail. What is clear is that this race should be
fixed, so lets add the proper `use mtab` line to handle it.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2148
This adds systemd unit files replacing the functionality offered by
the SysV init script found in etc/init.d.
It has been developed and tested on Fedora 19, Fedora 20
and openSuSE 13.1.
Four unit files and one target are offered.
zfs-import-cache.service:
Import pools from /etc/zfs/zpool.cache. This unit will wait for
udev to settle.
zfs-import-scan.service:
Import pools by scanning /dev/disk/by-id for zvols. This unit will
only run if /etc/zfs/zpool.cache is not present. This unit will wait
for udev to settle
zfs-mount.service:
Mount ZFS native filesystems. It contains a dependency to be loaded
before local-fs.target.
zfs-share.service:
Share NFS/SMB filesystems. This unit contains a dependency that
will cause it to be restarted whenever the smb or nfs-server unit
is restarted, restoring the shares added.
zfs.target:
This target pulls in the other units in order to start ZFS. It's
the only unit that can be enabled/disabled, all other services
are static and pulled in by dependencies. It will honour zfs=off
and zfs=no options on the kernel command line.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2108
The vdev_id udev helper currently applies slot renumbering rules to
every channel (JBOD) in the system. This is too inflexible for systems
with non-homogeneous storage topologies. The "slot" keyword now takes
an optional third parameter which names a channel to which the mapping
will apply. If the third parameter is omitted then the rule applies to
all channels. The first-specified rule that can match a slot takes
precedence. Therefore a channel-specific rule for a given slot should
generally appear before a generic rule for the same slot number. In
this way a custom slot mapping can be applied to a particular channel
and a default mapping applied to the rest.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2056
As a 'stop' action ensure the filesystem is unshared before
it is unmounted, just in case. Additionally, export the pool
so it may be cleanly imported by a different host.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2003
Allow verbose mounts to make is easier to monitor progress when
mounting a large number of filesystems.
This functionality is disabled by default.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1929
Many people prefer to use by-id at import time instead of using
the cache file. This can be a much better solution than the cache
file in some environments so we're adding some infrastructure to
allow it.
This functionality is disabled by default.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1929
The previous pattern could accidentally match on things like
'real_root=ZFS=node02-zp00/ROOT/rootfs' due to the 'ZFS=no'
substring.
Signed-off-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1837
The current zfs OpenRC script's dependencies cause OpenRC to attempt to
unmount ZFS filesystems at shutdown while things were still using them,
which would fail. This is a cosmetic issue, but it should still be
addressed. It probably does not affect systems where the rootfs is a
legacy filesystem, but any system with the rootfs on ZFS needs to run
the ZFS init script after the system is ready to shutdown filesystems.
OpenRC's shutdown process occurs in the reverse order of the startup
process. Therefore running the ZFS shutdown procedure after filesystems
are ready to be unmounted requires running the startup procedure before
fstab. This patch changes the dependencies of the script to expliclty
run before fstab at boot when the rootfs is ZFS and to run after fstab
at boot whenever the rootfs is not ZFS. This should cover most use
cases.
The only cases not covered well by this are systems with legacy
root filesystems where people want to configure fstab to mount a non-ZFS
filesystem off a zvol and possibly also systems whose pools are stored
on network block devices. The former requires that the ZFS script run
before fstab, which could cause ZFS datasets to mount too early and
appear under the fstab mount points. The latter requires that the ZFS
script run after networking starts, which precludes the ability to store
any system information on ZFS. An additional OpenRC script could be
written to handle non-root pools on network block devices, but that will
depend on user demand and developer time.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1479
The kernel modules are now available in the Arch User Repository
(AUR) via zfs. Since their packaging is maintained and superior
to ours it is being removed from the tree.
https://wiki.archlinux.org/index.php/ZFS
Now that various distributions are picking up the packages we
should eventually be able to remove most of this infrastructure.
Packaging belongs with the distributions not upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In the interest of maintaining only one udev helper to give vdevs
user friendly names, the zpool_id and zpool_layout infrastructure
is being retired. They are superseded by vdev_id which incorporates
all the previous functionality.
Documentation for the new vdev_id(8) helper and its configuration
file, vdev_id.conf(5), can be found in their respective man pages.
Several useful example files are installed under /etc/zfs/.
/etc/zfs/vdev_id.conf.alias.example
/etc/zfs/vdev_id.conf.multipath.example
/etc/zfs/vdev_id.conf.sas_direct.example
/etc/zfs/vdev_id.conf.sas_switch.example
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#981
Add a vdev_id feature to map device names based on already defined
udev device links. To increase the odds that vdev_id will run after
the rules it depends on, increase the vdev.rules rule number from 60
to 69. With this change, vdev_id now provides functionality analogous
to zpool_id and zpool_layout, paving the way to retire those tools.
A defined alias takes precedence over a topology-derived name, but the
two naming methods can otherwise coexist. For example, one might name
drives in a JBOD with the sas_direct topology while naming an internal
L2ARC device with an alias.
For example, the following lines in vdev_id.conf will result in the
creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same
target as the device link specified in the third field.
# by-vdev
# name fully qualified or base name of device link
alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca
alias d2 wwn-0x5000c5002def789e
Also perform some minor vdev_id cleanup, such as removal of the unused
-s command line option.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#981
Remove all of the generated autotools products from the repository
and update the .gitignore files accordingly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#718
Currently, zvols have a discard granularity set to 0, which suggests to
the upper layer that discard requests of arbirarily small size and
alignment can be made efficiently.
In practice however, ZFS does not handle unaligned discard requests
efficiently: indeed, it is unable to free a part of a block. It will
write zeros to the specified range instead, which is both useless and
inefficient (see dnode_free_range).
With this patch, zvol block devices expose volblocksize as their discard
granularity, so the upper layer is aware that it's not supposed to send
discard requests smaller than volblocksize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#862
The end_writeback() function was changed by moving the call to
inode_sync_wait() earlier in to evict(). This effecitvely changes
the ordering of the sync but it does not impact the details of
the zfs implementation.
However, as part of this change end_writeback() was renamed to
clear_inode() to reflect the new semantics. This change does
impact us and clear_inode() now maps to end_writeback() for
kernels prior to 3.5.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#784
The vmtruncate_range() support has been removed from the kernel in
favor of using the fallocate method in the file_operations table.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
The export_operations member ->encode_fh() has been updated to
take both the child and parent inodes. This interface used to
take the child dentry and a bool describing if the parent is needed.
NOTE: While updating this code I noticed that we do not currently
cleanly handle the case where we're passed a connectable parent.
This code should be audited to make sure we're doing the right thing.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
Currently, zpool online -e (dynamic vdev expansion) doesn't work on
whole disks because we're invoking ioctl(BLKRRPART) from userspace
while ZFS still has a partition open on the disk, which results in
EBUSY.
This patch moves the BLKRRPART invocation from the zpool utility to the
module. Specifically, this is done just before opening the device in
vdev_disk_open() which is called inside vdev_reopen(). This requires
jumping through some hoops to get to the disk device from the partition
device, and to make sure we can still open the partition after the
BLKRRPART call.
Note that this new code path is triggered on dynamic vdev expansion
only; other actions, like creating a new pool, are unchanged and still
call BLKRRPART from userspace.
This change also depends on API changes which are available in 2.6.37
and latter kernels. The build system has been updated to detect this,
but there is no compatibility mode for older kernels. This means that
online expansion will NOT be available in older kernels. However, it
will still be possible to expand the vdev offline.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#808
As the Gentoo sys-fs/zfs maintainer, I receive license compatibility
questions and at times, those questions can be harassing. I feel that
the presence of the GPL in Gentoo's package metadata promotes such
questions. zfs.gentoo.in is the only GPLv2 licensed file in ZFS, so I
have taken the liberty of contacting all contributors to this file to
request permission to relicense it.
All of the contributors to this file have agreed to relicense it under
the 2-clause BSD license. I have added their Signed-offs to this commit,
in order of first contribution. Thank you everyone for being so
understanding.
Signed-off-by: devsk <devsku@gmail.com>
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrew Tselischev <andrewtselischev@gmail.com>
Signed-off-by: Zachary Bedell <zac@thebedells.org>
Signed-off-by: Gunnar Beutner <gunnar@beutner.name>
Signed-off-by: Kyle Fuller <inbox@kylefuller.co.uk>
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Closes#819
torvalds/linux@adc0e91ab1 introduced
introduced d_make_root() as a replacement for d_alloc_root(). Further
commits appear to have removed d_alloc_root() from the Linux source
tree. This causes the following failure:
error: implicit declaration of function 'd_alloc_root'
[-Werror=implicit-function-declaration]
To correct this we update the code to use the current d_make_root()
interface for readability. Then we introduce an autotools check
to determine if d_make_root() is available. If it isn't then we
define some compatibility logic which used the older d_alloc_root()
interface.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#776
vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path
in a storage topology to a channel name. The channel name is combined
with a disk enclosure slot number to create an alias that reflects the
physical location of the drive. This is particularly helpful when it
comes to tasks like replacing failed drives. Slot numbers may also be
re-mapped in case the default numbering is unsatisfactory. The drive
aliases will be created as symbolic links in /dev/disk/by-vdev.
The only currently supported topologies are sas_direct and sas_switch:
o sas_direct - a channel is uniquely identified by a PCI slot and a
HBA port
o sas_switch - a channel is uniquely identified by a SAS switch port
A multipath mode is supported in which dm-mpath devices are handled by
examining the first running component disk, as reported by 'multipath
-l'. In multipath mode the configuration file should contain a
channel definition with the same name for each path to a given
enclosure.
vdev_id can replace the existing zpool_id script on systems where the
storage topology conforms to sas_direct or sas_switch. The script
could be extended to support other topologies as well. The advantage
of vdev_id is that it is driven by a single static input file that can
be shared across multiple nodes having a common storage toplogy.
zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per
node and a separate slot-mapping file. However, zpool_id provides the
flexibility of using any device names that show up in
/dev/disk/by-path, so it may still be needed on some systems.
vdev_id's functionality subsumes that of the sas_switch_id script, and
it is unlikely that anyone is using it, so sas_switch_id is removed.
Finally, /dev/disk/by-vdev is added to the list of directories that
'zpool import' will scan.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#713
The mode argument of iops->create()/mkdir()/mknod() was changed from
an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf
check was added to detect the API change and then correctly set a
zpl_umode_t typedef. There is no functional change.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#701
The -l parameter to modprobe has been removed from the latest upstream
code and this change has entered Gentoo. Using modinfo as a substitute
addresses this.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#636
Allow rigorous (and expensive) tx validation to be enabled/disabled
indepentantly from the standard zfs debugging. When enabled these
checks ensure that all txs are constructed properly and that a dbuf
is never dirtied without taking the correct tx hold.
This checking is particularly helpful when adding new dmu consumers
like Lustre. However, for established consumers such as the zpl
with no known outstanding tx construction problems this is just
overhead.
--enable-debug-dmu-tx - Enable/disable validation of each tx as
--disable-debug-dmu-tx it is constructed. By default validation
is disabled due to performance concerns.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add support for the .zfs control directory. This was accomplished
by leveraging as much of the existing ZFS infrastructure as posible
and updating it for Linux as required. The bulk of the core
functionality is now all there with the following limitations.
*) The .zfs/snapshot directory automount support requires a 2.6.37
or newer kernel. The exception is RHEL6.2 which has backported
the d_automount patches.
*) Creating/destroying/renaming snapshots with mkdir/rmdir/mv
in the .zfs/snapshot directory works as expected. However,
this functionality is only available to root until zfs
delegations are finished.
* mkdir - create a snapshot
* rmdir - destroy a snapshot
* mv - rename a snapshot
The following issues are known defeciences, but we expect them to
be addressed by future commits.
*) Add automount support for kernels older the 2.6.37. This should
be possible using follow_link() which is what Linux did before.
*) Accessing the .zfs/snapshot directory via NFS is not yet possible.
The majority of the ground work for this is complete. However,
finishing this work will require resolving some lingering
integration issues with the Linux NFS kernel server.
*) The .zfs/shares directory exists but no futher smb functionality
has yet been implemented.
Contributions-by: Rohan Puri <rohan.puri15@gmail.com>
Contributiobs-by: Andrew Barnes <barnes333@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#173
Allow a source rpm to be rebuilt with debugging enabled. This
avoids the need to have to manually modify the spec file. By
default debugging is still largely disabled. To enable specific
debugging features use the following options with rpmbuild.
'--with debug' - Enables ASSERTs
# For example:
$ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm
Additionally, ZFS_CONFIG has been added to zfs_config.h for
packages which build against these headers. This is critical
to ensure both zfs and the dependant package are using the same
prototype and structure definitions.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning.
It allows ZVOL clients to discard (unmap, trim) block ranges from
a ZVOL, thus optimizing disk space usage by allowing a ZVOL to
shrink instead of just grow.
We can't use zfs_space() or zfs_freesp() here, since these functions
only work on regular files, not volumes. Fortunately we can use the
low-level function dmu_free_long_range() which does exactly what we
want.
Currently the discard operation is not added to the log. That's not
a big deal since losing discard requests cannot result in data
corruption. It would however result in disk space usage higher than
it should be. Thus adding log support to zvol_discard() is probably
a good idea for a future improvement.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is
supported, since it's the only one that matches the behavior of
zfs_space(). This makes it pretty much useless in its current
form, but it's a start.
To support other flag combinations we would need to modify
zfs_space() to make it more flexible, or emulate the desired
functionality in zpl_fallocate().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #334
The Linux block device queue subsystem exposes a number of configurable
settings described in Linux block/blk-settings.c. The defaults for these
settings are tuned for hard drives, and are not optimized for ZVOLs. Proper
configuration of these options would allow upper layers (I/O scheduler) to
take better decisions about write merging and ordering.
Detailed rationale:
- max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to
handle writes of any size, so there's no reason to impose a limit. Let the
upper layer decide.
- max_segments and max_segment_size are set to unlimited. zvol_write() will
copy the requests' contents into a dbuf anyway, so the number and size of
the segments are irrelevant. Let the upper layer decide.
- physical_block_size and io_opt are set to the ZVOL's block size. This
has the potential to somewhat alleviate issue #361 for ZVOLs, by warning
the upper layers that writes smaller than the volume's block size will be
slow.
- The NONROT flag is set to indicate this isn't a rotational device.
Although the backing zpool might be composed of rotational devices, the
resulting ZVOL often doesn't exhibit the same behavior due to the COW
mechanisms used by ZFS. Setting this flag will prevent upper layers from
making useless decisions (such as reordering writes) based on incorrect
assumptions about the behavior of the ZVOL.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
zvol_write() assumes that the write request must be written to stable storage
if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed,
"sync" does *not* mean what we think it means in the context of the Linux
block layer. This is well explained in linux/fs.h:
WRITE: A normal async write. Device will be plugged.
WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down
the hint that someone will be waiting on this IO
shortly.
WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush.
WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on
non-volatile media on completion.
In other words, SYNC does not *mean* that the write must be on stable storage
on completion. It just means that someone is waiting on us to complete the
write request. Thus triggering a ZIL commit for each SYNC write request on a
ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL
users have no way to express that they actually want data to be written to
stable storage, which means the ZIL is broken for ZVOLs.
The request for stable storage is expressed by the FUA flag, so we must
commit the ZIL after the write if the FUA flag is set. In addition, we must
commit the ZIL before the write if the FLUSH flag is set.
Also, we must inform the block layer that we actually support FLUSH and FUA.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The second argument of sops->show_options() was changed from a
'struct vfsmount *' to a 'struct dentry *'. Add an autoconf check
to detect the API change and then conditionally define the expected
interface. In either case we are only interested in the zfs_sb_t.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#549
The Linux 3.1 kernel has introduced the concept of per-filesystem
shrinkers which are directly assoicated with a super block. Prior
to this change there was one shared global shrinker.
The zfs code relied on being able to call the global shrinker when
the arc_meta_limit was exceeded. This would cause the VFS to drop
references on a fraction of the dentries in the dcache. The ARC
could then safely reclaim the memory used by these entries and
honor the arc_meta_limit. Unfortunately, when per-filesystem
shrinkers were added the old interfaces were made unavailable.
This change adds support to use the new per-filesystem shrinker
interface so we can continue to honor the arc_meta_limit. The
major benefit of the new interface is that we can now target
only the zfs filesystem for dentry and inode pruning. Thus we
can minimize any impact on the caching of other filesystems.
In the context of making this change several other important
issues related to managing the ARC were addressed, they include:
* The dnlc_reduce_cache() function which was called by the ARC
to drop dentries for the Posix layer was replaced with a generic
zfs_prune_t callback. The ZPL layer now registers a callback to
drop these dentries removing a layering violation which dates
back to the Solaris code. This callback can also be used by
other ARC consumers such as Lustre.
arc_add_prune_callback()
arc_remove_prune_callback()
* The arc_reduce_dnlc_percent module option has been changed to
arc_meta_prune for clarity. The dnlc functions are specific to
Solaris's VFS and have already been largely eliminated already.
The replacement tunable now represents the number of bytes the
prune callback will request when invoked.
* Less aggressively invoke the prune callback. We used to call
this whenever we exceeded the arc_meta_limit however that's not
strictly correct since it results in over zeleous reclaim of
dentries and inodes. It is now only called once the arc_meta_limit
is exceeded and every effort has been made to evict other data from
the ARC cache.
* More promptly manage exceeding the arc_meta_limit. When reading
meta data in to the cache if a buffer was unable to be recycled
notify the arc_reclaim thread to invoke the required prune.
* Added arcstat_prune kstat which is incremented when the ARC
is forced to request that a consumer prune its cache. Remember
this will only occur when the ARC has no other choice. If it
can evict buffers safely without invoking the prune callback
it will.
* This change is also expected to resolve the unexpect collapses
of the ARC cache. This would occur because when exceeded just the
arc_meta_limit reclaim presure would be excerted on the arc_c
value via arc_shrink(). This effectively shrunk the entire cache
when really we just needed to reclaim meta data.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#466Closes#292
Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit
SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170
Use the new set_nlink() kernel function instead.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #462
Added the necessary build infrastructure for building packages
compatible with the Arch Linux distribution. As such, one can now run:
$ ./configure
$ make pkg # Alternatively, one can run 'make arch' as well
on the Arch Linux machine to create two binary packages compatible with
the pacman package manager, one for the zfs userland utilities and
another for the zfs kernel modules. The new packages can then be
installed by running:
# pacman -U $package.pkg.tar.xz
In addition, source-only packages suitable for an Arch Linux chroot
environment or remote builder can also be build using the 'sarch' make
rule.
NOTE: Since the source dist tarball is created on the fly from the head
of the build tree, it's MD5 hash signature will be continually influx.
As a result, the md5sum variable was intentionally omitted from the
PKGBUILD files, and the '--skipinteg' makepkg option is used. This may
or may not have any serious security implications, as the source tarball
is not being downloaded from an outside source.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#491
For consistency and safety, quote all variables in the zfs.lsb script.
This protects in the unlikely case that any of the file names contain
whitespace.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #439
Let the administrator override all script variables by sourcing the
/etc/default/zfs file after the default values are set.
The spelling mistake in the old path name makes it unlikely that this
bug affected any users.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #371
Update the code to use the bdi_setup_and_register() helper to
simplify the bdi integration code. The updated code now just
registers the bdi during mount and destroys it during unmount.
The only complication is that for 2.6.32 - 2.6.33 kernels the
helper wasn't available so in these cases the zfs code must
provide it. Luckily the bdi_setup_and_register() function
is trivial.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#367
As written, the $(init_SCRIPTS) rule in etc/init.d/Makefule.am
would not work as expected if the init_SCRIPTS variable were
to contain any elements other than zfs. Fix this by replacing
the hard-coded 'zfs' reference with $@.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#410
This regression was accidentally introduced by commit aa2b489.
I was attempting to simplify the init scripts and accidentally
confused the /etc/init.d and /etc/zfs paths. This change reverts
the init script modifications.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#370
Change the variable substitution in the init script templates
according to the method described in the Autoconf manual;
Chapter 4.7.2: Installation Directory Variables.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This change moves the default install location for the zfs udev
rules from /etc/udev/ to /lib/udev/. The correct convention is
for rules provided by a package to be installed in /lib/udev/.
The /etc/udev/ directory is reserved for custom rules or local
overrides.
Additionally, this patch cleans up some abuse of the bindir install
location by adding a udevdir and udevruledir install directories.
This allows us to revert to the default bin install location. The
udev install directories can be set with the following new options.
--with-udevdir=DIR install udev helpers [EPREFIX/lib/udev]
--with-udevruledir=DIR install udev rules [UDEVDIR/rules.d]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#356
For a long time now the kernel has been moving away from using the
pdflush daemon to write 'old' dirty pages to disk. The primary reason
for this is because the pdflush daemon is single threaded and can be
a limiting factor for performance. Since pdflush sequentially walks
the dirty inode list for each super block any delay in processing can
slow down dirty page writeback for all filesystems.
The replacement for pdflush is called bdi (backing device info). The
bdi system involves creating a per-filesystem control structure each
with its own private sets of queues to manage writeback. The advantage
is greater parallelism which improves performance and prevents a single
filesystem from slowing writeback to the others.
For a long time both systems co-existed in the kernel so it wasn't
strictly required to implement the bdi scheme. However, as of
Linux 2.6.36 kernels the pdflush functionality has been retired.
Since ZFS already bypasses the page cache for most I/O this is only
an issue for mmap(2) writes which must go through the page cache.
Even then adding this missing support for newer kernels was overlooked
because there are other mechanisms which can trigger writeback.
However, there is one critical case where not implementing the bdi
functionality can cause problems. If an application handles a page
fault it can enter the balance_dirty_pages() callpath. This will
result in the application hanging until the number of dirty pages in
the system drops below the dirty ratio.
Without a registered backing_device_info for the filesystem the
dirty pages will not get written out. Thus the application will hang.
As mentioned above this was less of an issue with older kernels because
pdflush would eventually write out the dirty pages.
This change adds a backing_device_info structure to the zfs_sb_t
which is already allocated per-super block. It is then registered
when the filesystem mounted and unregistered on unmount. It will
not be registered for mounted snapshots which are read-only. This
change will result in flush-<pool> thread being dynamically created
and destroyed per-mounted filesystem for writeback.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#174
This change ensures the paths used by the provided init scripts
always reference the prefixes provided at configure time. The
@sbindir@ and @sysconfdir@ prefixes will be correctly replaced
at build time.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#336
Unlike most other Linux distributions archlinux installs its
init scripts in /etc/rc.d insead of /etc/init.d. This commit
provides an archlinux rc.d script for zfs and extends the
build infrastructure to ensure it get's installed in the
correct place.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#322
The relevant init scripts were updated so as to automatically share
ZFS datasets using "zfs share -a" at boot time.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Update paths to zpool/zfs tools,
* Log less for non-error conditions,
* Don't be fatal if umount fails at shutdown -- final init remount
will take care of it if /usr or / are in use
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The backticks would cause the output of the zfs commands
to be evaluated as input for the if construct rather than
their exit status.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
If rc_parallel="YES" zfs starts before localmount, which leads
to "No such file or directory" error on systems with /usr on a
separate partition.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The .get_sb callback has been replaced by a .mount callback
in the file_system_type structure. When using the new
interface the caller must now use the mount_nodev() helper.
Unfortunately, the new interface no longer passes the vfsmount
down to the zfs layers. This poses a problem for the existing
implementation because we currently save this pointer in the
super block for latter use. It provides our only entry point
in to the namespace layer for manipulating certain mount options.
This needed to be done originally to allow commands like
'zfs set atime=off tank' to work properly. It also allowed me
to keep more of the original Solaris code unmodified. Under
Solaris there is a 1-to-1 mapping between a mount point and a
file system so this is a fairly natural thing to do. However,
under Linux they many be multiple entries in the namespace
which reference the same filesystem. Thus keeping a back
reference from the filesystem to the namespace is complicated.
Rather than introduce some ugly hack to get the vfsmount and
continue as before. I'm leveraging this API change to update
the ZFS code to do things in a more natural way for Linux.
This has the upside that is resolves the compatibility issue
for the long term and fixes several other minor bugs which
have been reported.
This commit updates the code to remove this vfsmount back
reference entirely. All modifications to filesystem mount
options are now passed in to the kernel via a '-o remount'.
This is the expected Linux mechanism and allows the namespace
to properly handle any options which apply to it before passing
them on to the file system itself.
Aside from fixing the compatibility issue, removing the
vfsmount has had the benefit of simplifying the code. This
change which fairly involved has turned out nicely.
Closes#246Closes#217Closes#187Closes#248Closes#231
The security_inode_init_security() function now takes an additional
qstr argument which must be passed in from the dentry if available.
Passing a NULL is safe when no qstr is available the relevant
security checks will just be skipped.
Closes#246Closes#217Closes#187
These days most disk drivers will probe for devices asynchronously.
This means it's possible that when you zfs init script runs all the
required block devices may not yet have been discovered. The result
is the pool may fail to cleanly import at boot time. This is
particularly common when you have a large number of devices.
The fix is for the init script to block until udev settles and we
are no longer detecting new devices. Once the system has settled
the zfs modules can be loaded and the pool with be automatically
imported.
The inode eviction should unmap the pages associated with the inode.
These pages should also be flushed to disk to avoid the data loss.
Therefore, use truncate_setsize() in evict_inode() to release the
pagecache.
The API truncate_setsize() was added in 2.6.35 kernel. To ensure
compatibility with the old kernel, the patch defines its own
truncate_setsize function.
Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Closes#255
Update udev helper scripts to deal with device-mapper devices created
by multipathd. These enhancements are targeted at a particular
storage network topology under evaluation at LLNL consisting of two
SAS switches providing redundant connectivity between multiple server
nodes and disk enclosures.
The key to making these systems manageable is to create shortnames for
each disk that conveys its physical location in a drawer. In a
direct-attached topology we infer a disk's enclosure from the PCI bus
number and HBA port number in the by-path name provided by udev. In a
switched topology, however, multiple drawers are accessed via a single
HBA port. We therefore resort to assigning drawer identifiers based
on which switch port a drive's enclosure is connected to. This
information is available from sysfs.
Add options to zpool_layout to generate an /etc/zfs/zdev.conf using
symbolic links in /dev/disk/by-id of the form
<label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that
depends on the subsystem that created the link and defaults to
"dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a
unique identifier for the disk typically obtained from the scsi_id
program, and <X> and <Y> denote the switch port and disk slot numbers,
respectively.
Add a callout script sas_switch_id for use by multipathd to help
create symlinks of the form described above. Update zpool_id and the
udev zpool rules file to handle both multipath devices and
conventional drives.
Change the variable substitution in the udev rule templates
according to the method described in the Autoconf manual;
Chapter 4.7.2: Installation Directory Variables.
The udev rules are improperly generated if the bindir parameter
overrides the prefix parameter during configure. For example:
# ./configure --prefix=/usr/local --bindir=/opt/zfs/bin
The udev helper is installed as /opt/zfs/bin/zpool_id, but the
corresponding udev rule has a different path:
# /usr/local/etc/udev/rules.d/60-zpool.rules
ENV{DEVTYPE}=="disk", IMPORT{program}="/usr/local/bin/zpool_id -d %p"
The @bindir@ variable expands to "${exec_prefix}/bin", so it cannot
be used instead of @prefix@ directly.
This also applies to the zvol_id helper.
Closes#283.
The previous commit 8a7e1ceefa wasn't
quite right. This check applies to both the user and kernel space
build and as such we must make sure it runs regardless of what
the --with-config option is set too.
For example, if --with-config=kernel then the autoconf test does
not run and we generate build warnings when compiling the kernel
packages.
Gcc versions 4.3.2 and earlier do not support the compiler flag
-Wno-unused-but-set-variable. This can lead to build failures
on older Linux platforms such as Debian Lenny. Since this is
an optional build argument this changes add a new autoconf check
for the option. If it is supported by the installed version of
gcc then it is used otherwise it is omited.
See commit's 12c1acde76 and
79713039a2 for the reason the
-Wno-unused-but-set-variable options was originally added.
This workaround was introduced to workaround issue #164. This
issue was fixed by commit 5f35b19 so the workaround can be safely
dropped from both the zfs.fedora and zfs.gentoo init scripts.
Every distribution has slightly different requirements for their
init scripts. Because of this the zfs package contains several
init scripts for various distributions. These scripts have been
contributed by, and are supported by, the larger zfs community.
Init scripts for Gentoo/Lunar/Redhat have been contributed by:
Gentoo - devsk <devsku@gmail.com>
Lunar - Jean-Michel Bruenn <jean.bruenn@ip-minds.de>
Redhat - Fajar A. Nugraha <list@fajar.net>
This change fixes a kernel panic which would occur when resizing
a dataset which was not open. The objset_t stored in the
zvol_state_t will be set to NULL when the block device is closed.
To avoid this issue we pass the correct objset_t as the third arg.
The code has also been updated to correctly notify the kernel
when the block device capacity changes. For 2.6.28 and newer
kernels the capacity change will be immediately detected. For
earlier kernels the capacity change will be detected when the
device is next opened. This is a known limitation of older
kernels.
Online ext3 resize test case passes on 2.6.28+ kernels:
$ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023
$ zpool create tank /tmp/zvol
$ zfs create -V 500M tank/zd0
$ mkfs.ext3 /dev/zd0
$ mkdir /mnt/zd0
$ mount /dev/zd0 /mnt/zd0
$ df -h /mnt/zd0
$ zfs set volsize=800M tank/zd0
$ resize2fs /dev/zd0
$ df -h /mnt/zd0
Original-patch-by: Fajar A. Nugraha <github@fajar.net>
Closes#68Closes#84
Several Makefile.in's were accidentally not updated when the
kernel-insert-inode-locked.m4 check was added. This change simply
refreshes the missed files.
Apply all of Rudd-O's changes for the Fedora init script. The
initial init script was one I threw together based on Rudd-O's
original work. It worked for me but it has some flaws.
Rudd-O has invested considerable time updating it to be significantly
smarter. It now handles using ZFS as your root filesystem plus
various other quirks. Since he is familiar with the right
way to do things on Fedora and has tested this init script we
are integrating all of his changes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The udev/rules.d scripts must use absolute paths to their support
binaries. However, where those binaries get installed depends
on what --prefix was set to when the package was configured.
This change makes the udev/rules.d helpers to *.in files which
are processed by configure. This allows them to be dynamically
updated to include the specified --prefix.
Additionally, this change updates 60-zvol.rules to handle both
the 'add' and 'change' actions. This ensures that that all
valid zvol devices are correctly linked.
Added insert_inode_locked() helper function, prior to this most callers
used insert_inode_hash(). The older method doesn't check for collisions
in the inode_hashtable but it still acceptible for use. Fallback to
using insert_inode_hash() when insert_inode_locked() is unavailable.
To support automatically mounting your zfs on filesystem on boot
a basic init script is needed. Unfortunately, every distribution
has their own idea of the _right_ way to do things. Rather than
write one very complicated portable init script, which would be
invariably replaced by the distributions own anyway. I have
instead added support to provide multiple distribution specific
init scripts.
The correct init script for your distribution will be selected
by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT.
During 'make install' the correct script for your system will
be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the
usual /etc/init.d/zfs location.
Currently, there is zfs.fedora and a more generic zfs.lsb init
script. Hopefully, the distribution maintainers who know best
how they want their init scripts to function will feedback their
approved versions to be included in the project.
This change does not consider upstart jobs but I'm not at all
opposed to add that sort of thing.
This commit allows zvols with names longer than 32 characters, which
fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102.
Changes include:
- use /dev/zd* device names for zvol, where * is the device minor
(include/sys/fs/zfs.h, module/zfs/zvol.c).
- add BLKZNAME ioctl to get dataset name from userland
(include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id).
- add udev rule to create /dev/zvol/[dataset_name] and the legacy
/dev/[dataset_name] symlink. For partitions on zvol, it will create
/dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules,
cmd/zvol_id).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The open_bdev_exclusive() function has been replaced (again) by the
more generic blkdev_get_by_path() function. Additionally, the
counterpart function close_bdev_exclusive() has been replaced by
blkdev_put(). Because these functions are more generic versions
of the functions they replaced the compatibility macro must add
the FMODE_EXCL mask to ensure they are exclusive.
Closes#114
The new prefered inteface for evicting an inode from the inode cache
is the ->evict_inode() callback. It replaces both the ->delete_inode()
and ->clear_inode() callbacks which were previously used for this.
The fsync() callback in the file_operations structure used to take
3 arguments. The callback now only takes 2 arguments because the
dentry argument was determined to be unused by all consumers. To
handle this a compatibility prototype was added to ensure the right
prototype is used. Our implementation never used the dentry argument
either so it's just a matter of using the right prototype.
The const keyword was added to the 'struct xattr_handler' in the
generic Linux super_block structure. To handle this we define an
appropriate xattr_handler_t typedef which can be used. This was
the preferred solution because it keeps the code clean and readable.
ZFS even under Solaris does not strictly require libshare to be
available. The current implementation attempts to dlopen() the
library to access the needed symbols. If this fails libshare
support is simply disabled.
This means that on Linux we only need the most minimal libshare
implementation. In fact just enough to prevent the build from
failing. Longer term we can decide if we want to implement a
libshare library like Solaris. At best this would be an abstraction
layer between ZFS and NFS/SMB. Alternately, we can drop libshare
entirely and directly integrate ZFS with Linux's NFS/SMB.
Finally the bare bones user-libshare.m4 test was dropped. If we
do decide to implement libshare at some point it will surely be
as part of this package so the check is not needed.
If libselinux is detected on your system at configure time link
against it. This allows us to use a library call to detect if
selinux is enabled and if it is to pass the mount option:
"context=\"system_u:object_r:file_t:s0"
For now this is required because none of the existing selinux
policies are aware of the zfs filesystem type. Because of this
they do not properly enable xattr based labeling even though
zfs supports all of the required hooks.
Until distro's add zfs as a known xattr friendly fs type we
must use mntpoint labeling. Alternately, end users could modify
their existing selinux policy with a little guidance.
ZFS works best when it is notified as soon as possible when a device
failure occurs. This allows it to immediately start any recovery
actions which may be needed. In theory Linux supports a flag which
can be set on bio's called FAILFAST which provides this quick
notification by disabling the retry logic in the lower scsi layers.
That's the theory at least. In practice is turns out that while the
flag exists you oddly have to set it with the BIO_RW_AHEAD flag.
And even when it's set it you may get retries in the low level
drivers decides that's the right behavior, or if you don't get the
right error codes reported to the scsi midlayer.
Unfortunately, without additional kernels patchs there's not much
which can be done to improve this. Basically, this just means that
it may take 2-3 minutes before a ZFS is notified properly that a
device has failed. This can be improved and I suspect I'll be
submitting patches upstream to handle this.
One of the neat tricks an autoconf style project is capable of
is allow configurion/building in a directory other than the
source directory. The major advantage to this is that you can
build the project various different ways while making changes
in a single source tree.
For example, this project is designed to work on various different
Linux distributions each of which work slightly differently. This
means that changes need to verified on each of those supported
distributions perferably before the change is committed to the
public git repo.
Using nfs and custom build directories makes this much easier.
I now have a single source tree in nfs mounted on several different
systems each running a supported distribution. When I make a
change to the source base I suspect may break things I can
concurrently build from the same source on all the systems each
in their own subdirectory.
wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz
tar -xzf zfs-x.y.z.tar.gz
cd zfs-x-y-z
------------------------- run concurrently ----------------------
<ubuntu system> <fedora system> <debian system> <rhel6 system>
mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6
cd ubuntu cd fedora cd debian cd rhel6
../configure ../configure ../configure ../configure
make make make make
make check make check make check make check
This change also moves many of the include headers from individual
incude/sys directories under the modules directory in to a single
top level include directory. This has the advantage of making
the build rules cleaner and logically it makes a bit more sense.
Add the initial products from autogen.sh. These products will
be updated incrementally after this point as development occurs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add autoconf style build infrastructure to the ZFS tree. This
includes autogen.sh, configure.ac, m4 macros, some scripts/*,
and makefiles for all the core ZFS components.
Chunwei Chen
Brian Behlendorf
Manuel Amador (Rudd-O)
Carlo Landmeter
Grischa Zengel
James Lee
Turbo Fredriksson
yuina822
SenH
Richard Yao
DHE
Hajo Möller
Chris Dunlap
Dan Swartzendruber
alteriks
Ralf Ertzinger
Derek Dai
Ned Bass
Matthew Thode
Richard Yao
Etienne Dechamps
Ned A. Bass
Darik Horn
Prakash Surya
Kyle Fuller
Fajar A. Nugraha
Gunnar Beutner
Zachary Bedell
Andrew Tselischev
Prasad Joshi
Alexey Shvetsov
Aniruddha Shankar
Richard Laager