Commit Graph

1923 Commits

Author SHA1 Message Date
Rich Ercolani 59f1875639 linux 6.3 compat: add another bdev_io_acct case
Linux 6.3+, and backports from it (6.2.8+), changed the
signatures on bdev_io_{start,end}_acct.  Add a case for it.  

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14658
Closes #14668
2023-03-28 08:16:46 -07:00
Ameer Hamza dedd8243fc zed: add hotplug support for spare vdevs
This commit supports for spare vdev hotplug. The
spare vdev associated with all the pools will be
marked as "Removed" when the drive is physically
detached and will become "Available" when the
drive is reattached. Currently, the spare vdev
status does not change on the drive removal and
the same is the case with reattachment.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14295
2023-03-27 11:32:09 -07:00
Ameer Hamza bd9a9a4e1a zed: mark disks as REMOVED when they are removed
ZED does not take any action for disk removal events if there is no
spare VDEV available. Added zpool_vdev_remove_wanted() in libzfs
and vdev_remove_wanted() in vdev.c to remove the VDEV through ZED
on removal event.  This means that if you are running zed and
remove a disk, it will be propertly marked as REMOVED.

Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
2023-03-27 11:32:09 -07:00
Alexander Motin 9d2e5c14b2 System-wide speculative prefetch limit.
With some pathological access patterns it is possible to make ZFS
accumulate almost unlimited amount of speculative prefetch ZIOs.
Combined with linear ABD allocations in RAIDZ code, it appears to
be possible to exhaust system KVA, triggering kernel panic.

Address this by introducing a system-wide counter of active prefetch
requests and blocking prefetch distance doubling per stream hits if
the number of active requests is higher that ~6% of ARC size.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14516
2023-03-02 14:37:07 -08:00
Alexander Motin b644a45bd4 Prefetch on deadlists merge
During snapshot deletion ZFS may issue several reads for each deadlist
to merge them into next snapshot's or pool's bpobj.  Number of the dead
lists increases with number of snapshots.  On HDD pools it may take
significant time during which sync thread is blocked.

This patch introduces prescient prefetch of required blocks for up to
128 deadlists ahead.  Tests show reduction of time required to delete
dataset with 720 snapshots with randomly overwritten file on wide HDD
pool from 75-85 to 22-28 seconds.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Issue #14276 
Closes #14402
2023-03-02 14:37:07 -08:00
Alexander Motin c8d36e2192 Pack zrlock_t by 8 bytes
On FreeBSD this reduces this structure size from 64 to 56 bytes.
dnode_handle_t respectively reduces from 72 to 64 bytes. It sounds
like a waste to need 72 bytes to be able to relocate 808 bytes of
dnode_t, which relocation on FreeBSD is not even supported.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14317
2023-03-02 14:37:07 -08:00
Alexander Motin 04a6ae0585 Switch dnode stats to wmsums
I've noticed that some of those counters are used in hot paths like
dnode_hold_impl(), and results of this change is visible in profiler.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #14198
2023-03-02 14:37:07 -08:00
Alexander Motin 2098a00318 Remove atomics from zh_refcount
It is protected by z_hold_locks, so we do not need more serialization,
simple integer math should be fine.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Closes #14196
2023-03-02 14:37:07 -08:00
Alexander Motin 82e3117095 Optimize microzaps
Microzap on-disk format does not include a hash tree, expecting one to
be built in RAM during mzap_open().  The built tree is linked to DMU
user buffer, freed when original DMU buffer is dropped from cache. I've
found that workloads accessing many large directories and having active
eviction from DMU cache spend significant amount of time building and
then destroying the trees.  I've also found that for each 64 byte mzap
element additional 64 byte tree element is allocated, that is a waste
of memory and CPU caches.

Improve memory efficiency of the hash tree by switching from AVL-tree
to B-tree.  It allows to save 24 bytes per element just on pointers.
Save 32 bits on mze_hash by storing only upper 32 bits since lower 32
bits are always zero for microzaps.  Save 16 bits on mze_chunkid, since
microzap can never have so many elements.  Respectively with the 16 bits
there can be no more than 16 bits of collision differentiators.  As
result, struct mzap_ent now drops from 48 (rounded to 64) to 8 bytes.

Tune B-trees for small data.  Reduce BTREE_CORE_ELEMS from 128 to 126
to allow struct zfs_btree_core in case of 8 byte elements to pack into
2KB instead of 4KB.  Aside of the microzaps it should also help 32bit
range trees.  Allow custom B-tree leaf size to reduce memmove() time.

Split zap_name_alloc() into zap_name_alloc() and zap_name_init_str().
It allows to not waste time allocating/freeing memory when processing
multiple names in a loop during mzap_open().

Together on a pool with 10K directories of 1800 files each and DMU
cache limited to 128MB this reduces time of `find . -name zzz` by 41%
from 7.63s to 4.47s, and saves additional ~30% of CPU time on the DMU
cache reclamation.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14039

(cherry picked from commit 9dcdee7889)
2023-03-02 14:37:07 -08:00
George Amanakis 7043742828 Revert zfeature_active() to static
Signed-off-by: George Amanakis <gamanakis@gmail.com>
2023-03-01 09:36:19 -08:00
George Amanakis 57159a519b Fix a race condition in dsl_dataset_sync() when activating features
The zio returned from arc_write() in dmu_objset_sync() uses
zio_nowait(). However we may reach the end of dsl_dataset_sync()
which checks if we need to activate features in the filesystem
without knowing if that zio has even run through the ZIO pipeline yet.
In that case we will flag features to be activated in
dsl_dataset_block_born() but dsl_dataset_sync() has already
completed its run and those features will not actually be activated.
Mitigate this by moving the feature activation code in
dsl_dataset_sync_done(). Also add new ASSERTs in
dsl_scan_visitbp() checking if a block contradicts any filesystem
flags.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #13816
2023-03-01 09:36:19 -08:00
Coleman Kane 232fc23c6e linux 6.2 compat: zpl_set_acl arg2 is now struct dentry
Linux 6.2 changes the second argument of the set_acl operation to be a
"struct dentry *" rather than a "struct inode *". The inode* parameter
is still available as dentry->d_inode, so adjust the call to the _impl
function call to dereference and pass that pointer to it.

Also document that the get_acl -> get_inode_acl member name change from
commit 884a693 was an API change also introduced in Linux 6.2.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #14415
2023-01-24 15:36:08 -08:00
Gian-Carlo DeFazio f22254283a change how d_alias is replaced by du.d_alias
d_alias may need to be converted to du.d_alias
depending on the kernel version.
d_alias is currently in only one place in the code which
changes
"hlist_for_each_entry(dentry, &inode->i_dentry, d_alias)"
to
"hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias)"
as neccesary.

This effectively results in a double macro expansion
for code that uses the zfs headers but already has its
own macro for just d_alias (lustre in this case).

Remove the conditional code for hlist_for_each_entry
and have a macro for "d_alias -> du.d_alias" instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gian-Carlo DeFazio <defazio1@llnl.gov>
Closes #14377
2023-01-19 12:50:42 -08:00
Ethan Coe-Renner 9ef565a185 Add color output to zfs diff.
This adds support to color zfs diff (in the style of git diff)
conditional on the ZFS_COLOR environment variable.

Signed-off-by: Ethan Coe-Renner <coerenner1@llnl.gov>
2023-01-19 12:50:36 -08:00
Coleman Kane 3c0b8c874b linux 6.2 compat: bio->bi_rw was renamed bio->bi_opf
The bi_rw member of struct bio was renamed to bi_opf in Linux 6.2.
As well, Linux's implementation of bio_set_op_attrs(...) has been
removed.

The HAVE_BIO_BI_OPF macro already appears to be defined, but the
removal of the bio_set_op_attrs(...) implementation makes the build
fall back on the locally-defined implementation, which isn't updated
for the bio->bi_opf change. This commit adds that update.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #14324
Closes #14331
2023-01-10 08:43:49 -08:00
Coleman Kane b586ea5d93 linux 6.2 compat: get_acl() got moved to get_inode_acl() in 6.2
Linux 6.2 renamed the get_acl() operation to get_inode_acl() in
the inode_operations struct. This should fix Issue #14323.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #14323
Closes #14331
2023-01-10 08:43:49 -08:00
Brooks Davis 572bd18c1f Make 1-bit bitfields unsigned
This fixes -Wsingle-bit-bitfield-constant-conversion warning from
clang-16 like:

lib/libzfs/libzfs_dataset.c:4529:19: error: implicit truncation
  from 'int' to a one-bit wide bit-field changes value from
  1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                flags.nounmount = B_TRUE;
				^ ~~~~~~

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes #14125
2022-12-01 12:39:43 -08:00
Pavel Snajdr 52e658edd7 Remove zpl_revalidate: fix snapshot rollback
Open files, which aren't present in the snapshot, which is being
roll-backed to, need to disappear from the visible VFS image of
the dataset.

Kernel provides d_drop function to drop invalid entry from
the dcache, but inode can be referenced by dentry multiple dentries.

The introduced zpl_d_drop_aliases function walks and invalidates
all aliases of an inode.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes #9600
Closes #14070
2022-12-01 12:39:42 -08:00
наб 39a39b8ab9 Handle ECKSUM as new EZFS_CKSUM ‒ "insufficient replicas"
Add a meaningful error message for ECKSUM to common error messages.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #6805
Closes #13808
Closes #13898
2022-12-01 12:39:40 -08:00
Richard Yao b247d47be1 Cleanup: Make memory barrier definitions consistent across kernels
We inherited membar_consumer() and membar_producer() from OpenSolaris,
but we had replaced membar_consumer() with Linux's smp_rmb() in
zfs_ioctl.c. The FreeBSD SPL consequently implemented a shim for the
Linux-only smp_rmb().

We reinstate membar_consumer() in platform independent code and fix the
FreeBSD SPL to implement membar_consumer() in a way analogous to Linux.

Reviewed-by: Konstantin Belousov <kib@FreeBSD.org>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13843
2022-12-01 12:39:40 -08:00
Richard Yao 7a1b6c51d0 Linux: Remove ZFS_AC_KERNEL_SRC_MODULE_PARAM_CALL_CONST autotools check
On older kernels, the definition for `module_param_call()` typecasts
function pointers to `(void *)`, which triggers -Werror, causing the
check to return false when it should return true.

Fixing this breaks the build process on some older kernels because they
define a `__check_old_set_param()` function in their headers that checks
for a non-constified `->set()`. We workaround that through the c
preprocessor by defining `__check_old_set_param(set)` to `(set)`, which
prevents the build failures.

However, it is now apparent that all kernels that we support have
adopted the GRSecurity change, so there is no need to have an explicit
autotools check for it anymore. We therefore remove the autotools check,
while adding the workaround to our headers for the build time
non-constified `->set()` check done by older kernel headers.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13984
Closes #14004
2022-11-01 12:42:01 -07:00
Akash B 7ac732b8d6 Add options to zfs redundant_metadata property
Currently, additional/extra copies are created for metadata in
addition to the redundancy provided by the pool(mirror/raidz/draid),
due to this 2 times more space is utilized per inode and this decreases
the total number of inodes that can be created in the filesystem. By
setting redundant_metadata to none, no additional copies of metadata
are created, hence can reduce the space consumed by the additional
metadata copies and increase the total number of inodes that can be
created in the filesystem.  Additionally, this can improve file create
performance due to the reduced amount of metadata which needs
to be written.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes #13680
2022-11-01 12:25:58 -07:00
Andriy Gapon 04f1983aab FreeBSD: vn_flush_cached_data: observe vnode locking contract
vm_object_page_clean() expects that the associated vnode is locked
as VOP_PUTPAGES() may get called on the vnode.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes #14079
(cherry picked from commit 41133c9794)
2022-10-27 16:14:57 -07:00
Alexander Motin 33223cbc3c Refactor Log Size Limit
Original Log Size Limit implementation blocked all writes in case of
limit reached until the TXG is committed and the log is freed.  It
caused huge delays and following speed spikes in application writes.

This implementation instead smoothly throttles writes, using exactly
the same mechanism as used for dirty data.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: jxdking <lostking2008@hotmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Issue #12284
Closes #13476
2022-09-26 14:55:27 -07:00
Brian Behlendorf 91e02156dd Revert "Reduce dbuf_find() lock contention"
This reverts commit 34dbc618f5.  While this
change resolved the lock contention observed for certain workloads, it
inadventantly reduced the maximum hash inserts/removes per second.  This
appears to be due to the slightly higher acquisition cost of a rwlock vs
a mutex.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
2022-09-21 13:15:51 -07:00
Ameer Hamza d5105f068f zfs recv hangs if max recordsize is less than received recordsize
- Some optimizations for bqueue enqueue/dequeue.
- Added a fix to prevent deadlock when both bqueue_enqueue_impl()
and bqueue_dequeue() waits for signal to be triggered.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #13855
2022-09-21 13:15:26 -07:00
наб faa1e4082d include: move SPA_MINBLOCKSHIFT and zio_encrypt to sys/fs/zfs.h
These are used by userspace, so should live in a public header

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12116
2022-09-21 13:15:26 -07:00
Alexander Motin 44cec45f72 Improve too large physical ashift handling
When iterating through children physical ashifts for vdev, prefer
ones above the maximum logical ashift, that we can actually use,
but within the administrator defined maximum.

When selecting top-level vdev ashift, do not set it to the defined
maximum in case physical ashift is even higher, but just ignore one.
Using the maximum does not prevent misaligned writes, but reduces
space efficiency.  Since ZFS tries to write data sequentially and
aggregates the writes, in many cases large misanigned writes may be
not as bad as the space penalty otherwise.

Allow internal physical ashifts for vdevs higher than SHIFT_MAX.
May be one day allocator or aggregation could benefit from that.

Reduce zfs_vdev_max_auto_ashift default from 16 (64KB) to 14 (16KB),
so that ZFS may still use bigger ashifts up to SHIFT_MAX (64KB),
but only if it really has to or explicitly told to, but not as an
"optimization".

There are some read-intensive NVMe SSDs that report Preferred Write
Alignment of 64KB, and attempt to build RAIDZ2 of those leads to a
space inefficiency that can't be justified.  Instead these changes
make ZFS fall back to logical ashift of 12 (4KB) by default and
only warn user that it may be suboptimal for performance.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #13798
2022-09-21 13:15:15 -07:00
Kevin Jin d05f3039f7 Add Module Parameter Regarding Log Size Limit
zfs_wrlog_data_max
The upper limit of TX_WRITE log data. Once it is reached,
write operation is blocked, until log data is cleared out
after txg sync. It only counts TX_WRITE log with WR_COPIED
or WR_NEED_COPY.

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: jxdking <lostking2008@hotmail.com>
Closes #12284
2022-09-21 16:12:14 -07:00
Kevin Jin 999830a021 Optimize txg_kick() process (#12274)
Use dp_dirty_pertxg[] for txg_kick(), instead of dp_dirty_total in
original code. Extra parameter "txg" is added for txg_kick(), thus it
knows which txg to kick. Also txg_kick() call is moved from
dsl_pool_need_dirty_delay() to dsl_pool_dirty_space() so that we can
know the txg number assigned for txg_kick().

Some unnecessary code regarding dp_dirty_total in txg_sync_thread() is
also cleaned up.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: jxdking <lostking2008@hotmail.com>
Closes #12274
2022-09-21 16:12:14 -07:00
Ameer Hamza a5b0d42540 zfs recv hangs if max recordsize is less than received recordsize
- Some optimizations for bqueue enqueue/dequeue.
- Added a fix to prevent deadlock when both bqueue_enqueue_impl()
and bqueue_dequeue() waits for signal to be triggered.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #13855
2022-09-19 09:39:07 -07:00
Christian Schwarz cde04badd1 make DMU_OT_IS_METADATA and DMU_OT_IS_ENCRYPTED return B_TRUE or B_FALSE
Without this patch, the

    ASSERT3U(dbuf_is_metadata(db), ==, arc_is_metadata(buf));

at the beginning of dbuf_assign_arcbuf can panic
if the object type is a DMU_OT_NEWTYPE that has
DMU_OT_METADATA set.

While we're at it, fix DMU_OT_IS_ENCRYPTED as well.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Christian Schwarz <christian.schwarz@nutanix.com>
Closes #13842
2022-09-15 16:58:35 -07:00
Akash B 03fa3ef264 Add physical device size to SIZE column in 'zpool list -v'
Add physical device size/capacity only for physical devices in
'zpool list -v' instead of displaying "-" in the SIZE column.
This would make it easier to see the individual device capacity and
to determine which spares are large enough to replace which devices.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes #12561
Closes #13106
2022-09-15 10:23:01 -07:00
George Amanakis 8bd3dca9bf Introduce a tunable to exclude special class buffers from L2ARC
Special allocation class or dedup vdevs may have roughly the same
performance as L2ARC vdevs. Introduce a new tunable to exclude those
buffers from being cacheable on L2ARC.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #11761
Closes #12285
2022-09-14 11:27:00 -07:00
Tony Hutter 7bbfac9d04 zed: Fix config_sync autoexpand flood
Users were seeing floods of `config_sync` events when autoexpand was
enabled.  This happened because all "disk status change" udev events
invoke the autoexpand codepath, which calls zpool_relabel_disk(),
which in turn cause another "disk status change" event to happen,
in a feedback loop.  Note that "disk status change" happens every time
a user calls close() on a block device.

This commit breaks the feedback loop by only allowing an autoexpand
to happen if the disk actually changed size.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #7132
Closes: #7366
Closes #13729
2022-09-14 09:57:44 -07:00
Walter Huf 2010c183bc Add xattr_handler support for Android kernels
Some ARM BSPs run the Android kernel, which has
a modified xattr_handler->get() function signature.
This adds support to compile against these kernels.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Walter Huf <hufman@gmail.com>
Closes #13824
2022-09-14 09:57:37 -07:00
Ryan Moeller 78206a2e44 FreeBSD: Mark ZFS_MODULE_PARAM_CALL as MPSAFE
ZFS_MODULE_PARAM_CALL handlers implement their own locking if needed
and do not require Giant.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #13756
2022-09-13 17:59:15 -07:00
Coleman Kane e0dbab1a14 Linux 6.0 compat: register_shrinker() now var-arg
The 6.0 kernel added a printf-style var-arg for args > 0 to the
register_shrinker function, in order to add names to shrinkers, in
commit e33c267ab70de4249d22d7eab1cc7d68a889bac2. This enables the
shrinkers to have friendly names exposed in /sys/kernel/debug/shrinker/.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #13748
2022-08-09 09:41:06 -07:00
Brian Behlendorf ef0e506f46 Fix -Wattribute-warning in zfs_log_xvattr()
Restructure the code in zfs_log_xvattr() to use a lr_attr_end
structure when accessing lr_attr_t elements located after the
variable sized array.  This makes the code more understandable
and resolves the accessing beyond the end of the field warnings.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #13528
Closes #13575
2022-07-27 13:38:56 -07:00
Tino Reichardt 4b0977027b Remove sha1 hashing from OpenZFS, it's not used anywhere.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12895
Closes #12902
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
2022-07-26 10:12:44 -07:00
Alexander Motin 15868d3ecb Fix scrub resume from newly created hole.
It may happen that scan bookmark points to a block that was turned
into a part of a big hole.  In such case dsl_scan_visitbp() may skip
it and dsl_scan_check_resume() will not be called for it.  As result
new scan suspend won't be possible until the end of the object, that
may take hours if the object is a multi-terabyte ZVOL on a slow HDD
pool, stretching TXG to all that time, creating all sorts of problems.

This patch changes the resume condition to any greater or equal block,
so even if we miss the bookmarked block, the next one we find will
delete the bookmark, allowing new suspend.

Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
2022-07-26 10:10:37 -07:00
Alexander Motin 4b8f16072d Fix and disable blocks statistics during scrub
Block statistics calculation during scrub I/O issue in case of sorted
scrub accounted ditto blocks several times.  Embedded blocks on other
side were not accounted at all.  This change moves the accounting from
issue to scan stage, that fixes both problems and also allows to avoid
pool-wide locking and the lock contention it created.

Since this statistics is quite specific and is not even exposed now
anywhere, disable its calculation by default to not waste CPU time.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #13579
2022-07-26 10:10:37 -07:00
Alexander Motin dc91a6a660 Several B-tree optimizations
- Introduce first element offset within a leaf.  It allows to reduce
by ~50% average memmove() size when adding/removing elements.  If the
added/removed element is in the first half of the leaf, we may shift
elements before it and adjust the bth_first instead of moving more
elements after it.
 - Use memcpy() instead of memmove() when we know there is no overlap.
 - Switch from uint64_t to uint32_t.  It does not limit anything,
but 32-bit arches should appreciate it greatly in hot paths.
 - Store leaf capacity in struct btree to avoid 64-bit divisions.
 - Adjust zfs_btree_insert_into_leaf() to always result in balanced
leaves after splitting, no matter where the new element was inserted.
Not that we care about it much, but it should also allow B-trees with
as little as two elements per leaf instead of 4 previously.

When scrubbing pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks this
reduces amount of time spent in memmove() inside the scan thread from
13.7% to 5.7% and total scrub time by ~15 seconds out of 9 minutes.
It should also reduce spacemaps load time, but I haven't measured it.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #13582
2022-07-26 10:10:37 -07:00
Alexander Motin a861aa2b9e Several sorted scrub optimizations
- Reduce size and comparison complexity of q_exts_by_size B-tree.
Previous code used two 64-bit divisions and many other operations to
compare two B-tree elements.  It created enormous overhead.  This
implementation moves the math to the upper level and stores the score
in the B-tree elements themselves.  Since all that we need to store in
that B-tree is the extent score and offset, those can fit into single
8 byte value instead of 24 bytes of q_exts_by_addr element and can be
compared with single operation.
 - Better decouple secondary tree logic from main range_tree by moving
rt_btree_ops and related functions into dsl_scan.c as ext_size_ops.
Those functions are very small to worry about the code duplication and
range_tree does not need to know details such as rt_btree_compare.
 - Instead of accounting number of pending bytes per pool, that needs
atomic on global variable per block, account the number of non-empty
per-vdev queues, that change much more rarely.
 - When extent scan is interrupted by TXG end, continue it in the next
TXG instead of selecting next best extent.  It allows to avoid leaving
one truncated (and so likely not the best any more) extent each TXG.

On top of some other optimizations this saves about 1.5 minutes out of
10 to scrub pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <caputit1@tcnj.edu>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #13576
2022-07-26 10:10:37 -07:00
Alexander Motin 884364ea85 More speculative prefetcher improvements
- Make prefetch distance adaptive: up to 4MB prefetch doubles for
every, hit same as before, but after that it grows by 1/8 every time
the prefetch read does not complete in time to satisfy the demand.
My tests show that 4MB is sufficient for wide NVMe pool to saturate
single reader thread at 2.5GB/s, while new 64MB maximum allows the
same thread to reach 1.5GB/s on wide HDD pool.  Further distance
increase may increase speed even more, but less dramatic and with
higher latency.

 - Allow early reuse of inactive prefetch streams: streams that never
saw hits can be reused immediately if there is a demand, while others
can be reused after 1s of inactivity, starting with the oldest.  After
2s of inactivity streams are deleted to free resources same as before.
This allows by several times increase strided read performance on HDD
pool in presence of simultaneous random reads, previously filling the
zfetch_max_streams limit for seconds and so blocking most of prefetch.

 - Always issue intermediate indirect block reads with SYNC priority.
Each of those reads if delayed for longer may delay up to 1024 other
block prefetches, that may be not good for wide pools.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #13452
2022-07-26 10:10:37 -07:00
Alexander Motin dd9c110ab5 Improve log spacemap load time
Previous flushing algorithm limited only total number of log blocks to
the minimum of 256K and 4x number of metaslabs in the pool.  As result,
system with 1500 disks with 1000 metaslabs each, touching several new
metaslabs each TXG could grow spacemap log to huge size without much
benefits.  We've observed one of such systems importing pool for about
45 minutes.

This patch improves the situation from five sides:
 - By limiting maximum period for each metaslab to be flushed to 1000
TXGs, that effectively limits maximum number of per-TXG spacemap logs
to load to the same number.
 - By making flushing more smooth via accounting number of metaslabs
that were touched after the last flush and actually need another flush,
not just ms_unflushed_txg bump.
 - By applying zfs_unflushed_log_block_pct to the number of metaslabs
that were touched after the last flush, not all metaslabs in the pool.
 - By aggressively prefetching per-TXG spacemap logs up to 16 TXGs in
advance, making log spacemap load process for wide HDD pool CPU-bound,
accelerating it by many times.
 - By reducing zfs_unflushed_log_block_max from 256K to 128K, reducing
single-threaded by nature log processing time from ~10 to ~5 minutes.

As further optimization we could skip bumping ms_unflushed_txg for
metaslabs not touched since the last flush, but that would be an
incompatible change, requiring new pool feature.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12789
2022-07-26 10:10:37 -07:00
Alexander Motin fdb80a2301 Add more control/visibility to spa_load_verify().
Use error thresholds from policy to control whether to scrub data
and/or metadata.  If threshold is set to UINT64_MAX, then caller
probably does not care about result and we may skip that part.

By default import neither set the data error threshold nor read
the error counter, so skip the data scrub for faster import.
Metadata are still scrubbed and fail if even single error found.

While there just for symmetry return number of metadata errors in
case threshold is not set to zero and we haven't reached it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #13022
2022-07-26 10:10:37 -07:00
Alexander Motin 415882d228 Avoid small buffer copying on write
It is wrong for arc_write_ready() to use zfs_abd_scatter_enabled to
decide whether to reallocate/copy the buffer, because the answer is
OS-specific and depends on the buffer size.  Instead of that use
abd_size_alloc_linear(), moved into public header.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12425
2022-07-26 10:10:37 -07:00
Alexander Motin 5b860ae1fb Remove refcount from spa_config_*()
The only reason for spa_config_*() to use refcount instead of simple
non-atomic (thanks to scl_lock) variable for scl_count is tracking,
hard disabled for the last 8 years.  Switch to simple int scl_count
reduces the lock hold time by avoiding atomic, plus makes structure
fit into single cache line, reducing the locks contention.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12287
2022-07-26 10:10:37 -07:00
Brian Behlendorf 1c4e6a312c Linux 5.19 compat: asm/fpu/internal.h
As of the Linux 5.19 kernel the asm/fpu/internal.h header was
entirely removed.  It has been effectively empty since the 5.16
kernel and provides no required functionality.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #13529
2022-06-01 14:24:49 -07:00