Commit Graph

244 Commits

Author SHA1 Message Date
Damian Szuberski 63652e1546
Add `--enable-asan` and `--enable-ubsan` switches
`configure` now accepts `--enable-asan` and `--enable-ubsan` switches
which results in passing `-fsanitize=address`
and `-fsanitize=undefined`, respectively, to the compiler. Those
flags are enabled in GitHub workflows for ZTS and zloop. Errors
reported by both instrumentations are corrected, except for:

- Memory leak reporting is (temporarily) suppressed. The cost of
  fixing them is relatively high compared to the gains.

- Checksum computing functions in `module/zcommon/zfs_fletcher*`
  have UBSan errors suppressed. It is completely impractical
  to enforce 64-byte payload alignment there due to performance
  impact.

- There's no ASan heap poisoning in `module/zstd/lib/zstd.c`. A custom
  memory allocator is used there rendering that measure
  unfeasible.

- Memory leaks detection has to be suppressed for `cmd/zvol_id`.
  `zvol_id` is run by udev with the help of `ptrace(2)`. Tracing is
  incompatible with memory leaks detection.

Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12928
2022-02-03 14:35:38 -08:00
наб 1ef686905b linux: libspl: zone: () -> (void)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12968
2022-02-01 16:57:00 -08:00
наб c70bb2f610 Replace *CTASSERT() with _Static_assert()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12993
2022-01-26 11:38:52 -08:00
наб 7ada752a93 Clean up CSTYLEDs
69 CSTYLED BEGINs remain, appx. 30 of which can be removed if cstyle(1)
had a useful policy regarding
  CALL(ARG1,
  	ARG2,
  	ARG3);
above 2 lines. As it stands, it spits out *both*
  sysctl_os.c: 385: continuation line should be indented by 4 spaces
  sysctl_os.c: 385: indent by spaces instead of tabs
which is very cool

Another >10 could be fixed by removing "ulong" &al. handling.
I don't foresee anyone actually using it intentionally
(does it even exist in modern headers? why did it in the first place?).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12993
2022-01-26 11:38:52 -08:00
наб be93512152 libspl: include: ia32: remove
It hosts only asm_linkage.h, which is entirely unused,
and has slightly diverged from the one that's actually used
(module/icp/include/sys/ia32/asm_linkage.h)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12993
2022-01-26 11:37:45 -08:00
наб a9e2788ffe
libspl: cast to uintptr_t instead of !!ing
This led to these two warning types:
  debug.h:139:67: warning: the address of ‘ARC_anon’
  will always evaluate as ‘true’ [-Waddress]
    139 | #define ASSERT3P(x, y, z)
              ((void) sizeof (!!(x)), (void) sizeof (!!(z)))
        |                                               ^
  arc.c:1591:2: note: in expansion of macro ‘ASSERT3P’
   1591 |  ASSERT3P(hdr->b_l1hdr.b_state, ==, arc_anon);
        |  ^~~~~~~~
and
  arc.h:66:44: warning: ‘<<’ in boolean context,
  did you mean ‘<’? [-Wint-in-bool-context]
     66 | #define HDR_GET_LSIZE(hdr)
              ((hdr)->b_lsize << SPA_MINBLOCKSHIFT)
  debug.h:138:46: note: in definition of macro ‘ASSERT3U’
    138 | #define ASSERT3U(x, y, z)
              ((void) sizeof (!!(x)), (void) sizeof (!!(z)))
        |                        ^
  arc.c:1760:12: note: in expansion of macro ‘HDR_GET_LSIZE’
   1760 |   ASSERT3U(HDR_GET_LSIZE(hdr), !=, 0);
        |            ^~~~~~~~~~~~~

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13009
2022-01-24 17:05:42 -08:00
наб bc40713a8f
libspl: ASSERT*: !! for sizeof
sizeof(bitfield.member) is invalid, and this shows up in some FreeBSD
build configurations: work around this by !!ing ‒
this makes the sizeof target the ! result type (_Bool), instead

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Fixes: 42aaf0e ("libspl: ASSERT*: mark arguments as used")
Closes #12984
Closes #12986
2022-01-21 10:20:11 -08:00
наб 18168da727
module/*.ko: prune .data, global .rodata
Evaluated every variable that lives in .data (and globals in .rodata)
in the kernel modules, and constified/eliminated/localised them
appropriately. This means that all read-only data is now actually
read-only data, and, if possible, at file scope. A lot of previously-
global-symbols became inlinable (and inlined!) constants. Probably
not in a big Wowee Performance Moment, but hey.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12899
2022-01-14 15:37:55 -08:00
Ryan Moeller 69c5e694a1
FreeBSD: Fix leaked strings in libspl mnttab
The FreeBSD implementations of various libspl functions for getting
mounted device information were found to leak several strings which
were being allocated in statfs2mnttab but never freed.

The Solaris getmntany(3C) and related interfaces are expected to return
strings residing in static buffers that need to be copied rather than
freed by the caller.

Use static thread-local storage to stash the mnttab structure strings
from FreeBSD's statfs info rather than strings allocated on the heap by
strdup(3).

While here, remove some stray commented out lines.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12961
2022-01-14 12:38:32 -08:00
наб da5f5ec508 libspl: kmem.h: mark unused kmem_*() macro arguments used
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12844
2021-12-23 09:36:12 -08:00
наб 42aaf0e7c4 libspl: ASSERT*: mark arguments as used
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12844
2021-12-23 09:35:47 -08:00
Martin Matuška 20f5c5b912
FreeBSD: fix world build after 143476ce8
Do not redefine the fallthrough macro when building with libcpp.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes #12880
2021-12-20 14:28:43 -08:00
наб 9e184b7c35 linux: libspl: getmntany: remove unused argument
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12829
2021-12-13 15:49:59 -08:00
Érico Nogueira Rolim ce2bdcedf5
libspl: fix warning about missing spl_pagesize declaration
Though it's unlikely anyone will alter its signature, avoids any
possible type mismatch.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Érico Nogueira <erico.erc@gmail.com>
Closes #12567
2021-09-24 16:59:26 -06:00
Brian Behlendorf 6954c22f35
Use fallthrough macro
As of the Linux 5.9 kernel a fallthrough macro has been added which
should be used to anotate all intentional fallthrough paths.  Once
all of the kernel code paths have been updated to use fallthrough
the -Wimplicit-fallthrough option will because the default.  To
avoid warnings in the OpenZFS code base when this happens apply
the fallthrough macro.

Additional reading: https://lwn.net/Articles/794944/

Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12441
2021-09-14 10:17:54 -06:00
наб 037af3e0d4 Remove NOTE(CONSTCOND) and note.h
These were mostly used to annotate do {} while(0)s

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12201
2021-07-26 12:07:53 -07:00
Kevin Bowling ca14e08cbf
Detect HAVE_LARGE_STACKS at compile time
Move HAVE_LARGE_STACKS definitions to header and set when appropriate.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Kevin Bowling <kbowling@FreeBSD.org>
Closes #12350
2021-07-16 14:28:55 -06:00
Alexander Motin 371f88d96f
Remove pool io kstats (#12212)
This mostly reverts "3537 want pool io kstats" commit of 8 years ago.

From one side this code using pool-wide locks became pretty bad for
performance, creating significant lock contention in I/O pipeline.
From another, there are more efficient ways now to obtain detailed
statistics, while this statistics is illumos-specific and much less
usable on Linux and FreeBSD, reported only via procfs/sysctls.

This commit does not remove KSTAT_TYPE_IO implementation, that may
be removed later together with already unused KSTAT_TYPE_INTR and
KSTAT_TYPE_TIMER.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12212
2021-06-10 08:27:33 -07:00
наб 327c904615 lib{efi,avl,share,tpool,zfs_core,zfsbootenv,zutil}: -fvisibility=hidden
No symbols affected in libavl
No symbols affected by libtpool, but pre-ANSI declarations got purged
No symbols affected by libzfs_core
No symbols affected by libzfs_bootenv

libefi got cleaned, gained efi_debug documentation in efi_partition.h,
and removes one undocumented and unused symbol from libzfs_core:
  D default_vtoc_map

libnvpair saw removal of these symbols:
  D nv_alloc_nosleep_def
  D nv_alloc_sleep
  D nv_alloc_sleep_def
  D nv_fixed_ops_def
  D nvlist_hashtable_init_size
  D nvpair_max_recursion

libshare saw removal of these symbols from libzfs:
  T libshare_nfs_init
  T libshare_smb_init
  T register_fstype
  B smb_shares

libzutil saw removal of these internal symbols from libzfs_core:
  T label_paths
  T slice_cache_compare
  T zpool_find_import_blkid
  T zpool_open_func
  T zutil_alloc
  T zutil_strdup

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12191
2021-06-09 17:04:32 -07:00
Alan Somers 75b4cbf625
libzfs: On FreeBSD, use MNT_NOWAIT with getfsstat
`getfsstat(2)` is used to retrieve the list of mounted file systems,
which libzfs uses when fetching properties like mountpoint, atime,
setuid, etc.  The `mode` parameter may be `MNT_NOWAIT`, which uses
information in the VFS's cache, or `MNT_WAIT`, which effectively does a
`statfs` on every single mounted file system in order to fetch the most
up-to-date information.  As far as I can tell, the only fields that
libzfs cares about are the filesystem's name, mountpoint, fstypename,
and mount flags.  Those things are always updated on mount and unmount,
so they will always be accurate in the VFS's mount cache except in two
circumstances:

1) When a file system is busy unmounting
2) When a ZFS file system changes the value of a mount-overridable
   property like atime or setuid, but doesn't remount the file system.
   Right now that only happens when the property is changed by an
   unprivileged user who has delegated authority to change the property
   but not to mount the dataset.  But perhaps libzfs could choose to do
   it for other reasons in the future.

Switching to `MNT_NOWAIT` will greatly improve speed with no downside,
as long as we explicitly update the mount cache whenever we change a
mount-overridable property.

For comparison, Illumos gets this information using the native
`getmntany` and `getmntent` functions, which also use cached
information.  The illumos function that would refresh the cache,
`resetmnttab`, is never called by libzfs.

And on GNU/Linux, `getmntany` and `getmntent` don't even communicate
with the kernel directly.  They simply parse the file they are given,
which is usually /etc/mtab or /proc/mounts.  Perhaps the implementation
of /proc/mounts is synchronous, ala MNT_WAIT; I don't know.

Sponsored-by:	Axcient
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alan Somers <asomers@gmail.com>
Closes: #12091
2021-06-08 07:36:43 -06:00
Alexander Motin ea400129c3
More aggsum optimizations
- Avoid atomic_add() when updating as_lower_bound/as_upper_bound.
Previous code was excessively strong on 64bit systems while not
strong enough on 32bit ones.  Instead introduce and use real
atomic_load() and atomic_store() operations, just an assignments
on 64bit machines, but using proper atomics on 32bit ones to avoid
torn reads/writes.

 - Reduce number of buckets on large systems.  Extra buckets not as
much improve add speed, as hurt reads.  Unlike wmsum for aggsum
reads are still important.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12145
2021-06-07 09:02:47 -07:00
наб 94f942c658
libspl: staticify buf and pagesize, rename aok to libspl_assert_ok
Exporting names this short can easily cause nasty collisions with user code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12050
2021-06-03 11:04:13 -06:00
Alexander Motin 86706441a8
Introduce write-mostly sums
wmsum counters are a reduced version of aggsum counters, optimized for
write-mostly scenarios.  They do not provide optimized read functions,
but instead allow much cheaper add function.  The primary usage is
infrequently read statistic counters, not requiring exact precision.

The Linux implementation is directly mapped into percpu_counter KPI.
The FreeBSD implementation is directly mapped into counter(9) KPI.
In user-space due to lack of better implementation mapped to aggsum.

Unfortunately neither Linux percpu_counter nor FreeBSD counter(9)
provide sufficient functionality to completelly replace aggsum, so
it still remains to be used for several hot counters.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12114
2021-05-27 14:27:29 -06:00
наб fef8bd41fc
libspl: implement atomics in terms of atomics
This replaces the generic libspl atomic.c atomics implementation
with one based on builtin gcc atomics.  This functionality was added
as an experimental feature in gcc 4.4.  Today even CentOS 7 ships
with gcc 4.8 as the default compiler we can make this the default.

Furthermore, the builtin atomics are as good or better than our
hand-rolled implementation so it's reasonable to drop that custom code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11904
2021-04-18 22:13:24 -07:00
наб a0978d15aa linux/libspl: gethostid: read from /proc/sys/kernel/spl/hostid, simplify
Fixes get_system_hostid() if it was set via the aforementioned sysctl
and simplifies the code a bit.  The kernel and user-space must agree,
after all.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11879
2021-04-15 14:55:47 -07:00
наб 2d14207c98 libspl: lift common bits of getexecname()
Merge the actual implementations of getexecname() and slightly clean
up the FreeBSD one.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11879
2021-04-15 14:55:40 -07:00
наб 533527725b libzfs: get rid of libzfs_handle::libzfs_mnttab
All users did a freopen() on it. Even some non-users did!
This is point-less ‒ just open the mtab when needed

If I understand Solaris' getextmntent(3C) correctly, the non-user
freopen()s are very likely an odd, twisted vestigial tail of that ‒
but it's got a completely different calling convention and caching
semantics than any platform we support

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11868
2021-04-13 14:14:44 -07:00
наб 74e48f470e linux/libspl: getextmntent(): don't leak mnttab FILE*
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11868
2021-04-13 14:14:44 -07:00
наб 10b575d04c lib/: set O_CLOEXEC on all fds
As found by
  git grep -E '(open|setmntent|pipe2?)\(' |
    grep -vE '((zfs|zpool)_|fd|dl|lzc_re|pidfile_|g_)open\('

FreeBSD's pidfile_open() says nothing about the flags of the files it
opens, but we can't do anything about it anyway; the implementation does
open all files with O_CLOEXEC

Consider this output with zpool.d/media appended with
"pid=$$; (ls -l /proc/$pid/fd > /dev/tty)":
  $ /sbin/zpool iostat -vc media
  lrwx------ 0 -> /dev/pts/0
  l-wx------ 1 -> 'pipe:[3278500]'
  l-wx------ 2 -> /dev/null
  lrwx------ 3 -> /dev/zfs
  lr-x------ 4 -> /proc/31895/mounts
  lrwx------ 5 -> /dev/zfs
  lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media
vs
  $ ./zpool iostat -vc vendor,upath,iostat,media
  lrwx------ 0 -> /dev/pts/0
  l-wx------ 1 -> 'pipe:[3279887]'
  l-wx------ 2 -> /dev/null
  lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11866
2021-04-11 15:45:59 -07:00
Jessica Clarke ef977fce66
Support running FreeBSD buildworld on Arm-based macOS hosts
Arm-based Macs are like FreeBSD and provide a full 64-bit stat from the
start, so have no stat64 variants. Thus, define stat64 and fstat64 as
aliases for the normal versions.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Closes #11771
2021-03-26 10:45:12 -07:00
Andrea Gelmini 8a915ba1f6
Removed duplicated includes
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #11775
2021-03-22 12:34:58 -07:00
Brian Behlendorf 0e6c493fec cppcheck: integrete cppcheck
In order for cppcheck to perform a proper analysis it needs to be
aware of how the sources are compiled (source files, include
paths/files, extra defines, etc).  All the needed information is
available from the Makefiles and can be leveraged with a generic
cppcheck Makefile target.  So let's add one.

Additional minor changes:

* Removing the cppcheck-suppressions.txt file.  With cppcheck 2.3
  and these changes it appears to no longer be needed.  Some inline
  suppressions were also removed since they appear not to be
  needed.  We can add them back if it turns out they're needed
  for older versions of cppcheck.

* Added the ax_count_cpus m4 macro to detect at configure time how
  many processors are available in order to run multiple cppcheck
  jobs.  This value is also now used as a replacement for nproc
  when executing the kernel interface checks.

* "PHONY =" line moved in to the Rules.am file which is included
  at the top of all Makefile.am's.  This is just convenient becase
  it allows us to use the += syntax to add phony targets.

* One upside of this integration worth mentioning is it now allows
  `make cppcheck` to be run in any directory to check that subtree.

* For the moment, cppcheck is not run against the FreeBSD specific
  kernel sources.  The cppcheck-FreeBSD target will need to be
  implemented and testing on FreeBSD to support this.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11508
2021-01-26 16:12:26 -08:00
Matt Macy 0e9bcd5d4f FreeBSD: fix HEAD build, conditionally remove FDSYNC defines
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11458
2021-01-23 15:39:55 -08:00
Brian Atkinson d0cd9a5cc6
Extending FreeBSD UIO Struct
In FreeBSD the struct uio was just a typedef to uio_t. In order to
extend this struct, outside of the definition for the struct uio, the
struct uio has been embedded inside of a uio_t struct.

Also renamed all the uio_* interfaces to be zfs_uio_* to make it clear
this is a ZFS interface.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #11438
2021-01-20 21:27:30 -08:00
Brian Behlendorf 1c2358c12a
Linux 5.10 compat: use iov_iter in uio structure
As of the 5.10 kernel the generic splice compatibility code has been
removed.  All filesystems are now responsible for registering a
->splice_read and ->splice_write callback to support this operation.

The good news is the VFS provided generic_file_splice_read() and
iter_file_splice_write() callbacks can be used provided the ->iter_read
and ->iter_write callback support pipes.  However, this is currently
not the case and only iovecs and bvecs (not pipes) are ever attached
to the uio structure.

This commit changes that by allowing full iov_iter structures to be
attached to uios.  Ever since the 4.9 kernel the iov_iter structure
has supported iovecs, kvecs, bvevs, and pipes so it's desirable to
pass the entire thing when possible.  In conjunction with this the
uio helper functions (i.e uiomove(), uiocopy(), etc) have been
updated to understand the new UIO_ITER type.

Note that using the kernel provided uio_iter interfaces allowed the
existing Linux specific uio handling code to be simplified.  When
there's no longer a need to support kernel's older than 4.9, then
it will be possible to remove the iovec and bvec members from the
uio structure and always use a uio_iter.  Until then we need to
maintain all of the existing types for older kernels.

Some additional refactoring and cleanup was included in this change:

- Added checks to configure to detect available iov_iter interfaces.
  Some are available all the way back to the 3.10 kernel and are used
  when available.  In particular, uio_prefaultpages() now always uses
  iov_iter_fault_in_readable() which is available for all supported
  kernels.

- The unused UIO_USERISPACE type has been removed.  It is no longer
  needed now that the uio_seg enum is platform specific.

- Moved zfs_uio.c from the zcommon.ko module to the Linux specific
  platform code for the zfs.ko module.  This gets it out of libzfs
  where it was never needed and keeps this Linux specific code out
  of the common sources.

- Removed unnecessary O_APPEND handling from zfs_iter_write(), this
  is redundant and O_APPEND is already handled in zfs_write();

Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11351
2020-12-18 08:48:26 -08:00
Matthew Macy 5fa356ea44
Remove UIO_ZEROCOPY functions structures
The original xuio zero copy functionality has always been unused 
on Linux and FreeBSD.  Remove this disabled code to avoid any
confusion and improve readability.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11124
2020-10-30 10:00:33 -07:00
Matthew Macy e53d678d4a
Share zfs_fsync, zfs_read, zfs_write, et al between Linux and FreeBSD
The zfs_fsync, zfs_read, and zfs_write function are almost identical
between Linux and FreeBSD.  With a little refactoring they can be
moved to the common code which is what is done by this commit.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #11078
2020-10-21 14:08:06 -07:00
Ryan Moeller 485b50bb9e
Cross-platform acltype
The acltype property is currently hidden on FreeBSD and does not
reflect the NFSv4 style ZFS ACLs used on the platform.  This makes it
difficult to observe that a pool imported from FreeBSD on Linux has a
different type of ACL that is being ignored, and vice versa.

Add an nfsv4 acltype and expose the property on FreeBSD.

Make the default acltype nfsv4 on FreeBSD.

Setting acltype to an unhanded style is treated the same as setting
it to off.  The ACLs will not be removed, but they will be ignored.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10520
2020-10-13 21:25:48 -07:00
Warner Losh b302185a92
FreeBSD: make adjustments for the standalone environment
In FreeBSD, there are three compile environments that are supported:
user land, the kernel and the bootloader / standalone. Adjust the
headers to compile in the standalone environment. Limit kernel-only
items from view when _STANDALONE is defined.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Warner Losh <imp@FreeBSD.org>
Closes #10998
2020-10-13 21:05:49 -07:00
Ryan Moeller e191b60ddc
FreeBSD: Improve libzfs_error_init messages
It is a common mistake to have failed to autoload the module due to
permission issues when running a ZFS command as a user.  "Operation
not permitted" is an unhelpfully vague error message.

Use a thread-local message buffer to format a nicer error message.
We can infer that loading the kernel module failed if the module is
not loaded.  This can be extended with heuristics for other errors
in the future.

While looking at this stuff, remove an unused thread-local message
buffer found in libspl and remove some inaccurate verbiage from the
comment on libzfs_load_module.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11033
2020-10-13 09:38:40 -07:00
Alexander Richardson f3064162ba
Fixes for running FreeBSD buildworld on Linux/macOS hosts
Adding an #ifdef __FreeBSD__ to a FreeBSD-specific header may seem odd,
but these headers are used on non-FreeBSD systems during the bootstrap
tools phase.
Originally submitted downstream as https://reviews.freebsd.org/D26193

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10863
2020-09-03 20:06:03 -07:00
Alexander Richardson 417e646722
Fix -Werror,-Wmacro-redefined in limits.h
Those macros are also defined by the compiler-provided float.h which
will be included later on (at least in the FreeBSD buildworld case) and
triggers these -Werror warnings. Including <float.h> first and only
defining the macros when DBL_DIG/FLT_DIG is missing fixes this problem.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10864
2020-09-01 16:22:09 -07:00
Ryan Moeller 46b7d53baf libspl: Provide platform-specific zone implementations
FreeBSD has the concept of jails, a precursor to Solaris's zones, which
can be mapped to the required zones interface with relative ease.  The
previous ZFS implementation in FreeBSD did so, and we should continue
to provide an appropriate implementation in OpenZFS as well.

Move lib/libspl/zone.c into platform code and adopt the correct
implementation for FreeBSD.

While here, prune unused code.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #10851
2020-08-31 19:43:30 -07:00
Alexander Richardson 2b07c5aa3e
Fix definition of BLKGETSIZE64 on FreeBSD
The matching ioctl is DIOCGMEDIASIZE.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Closes #10818
2020-08-27 16:09:26 -07:00
Chris McDonough c3b03d0701
Appease GCC sprintf warnings found on Fedora 32/GCC 10.0.1
Increase the size of DDT_NAMELEN and MNT_LINE_MAX to appease GCC
snprintf truncation warnings.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris McDonough <chrism@plope.com>
Closes #10712
Closes #10766
2020-08-24 10:32:59 -07:00
Matthew Ahrens c6f2b942be Remove KMC_NOMAGAZINE
Remove dead code to make the implementation easier to understand.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Ahrens <matt@delphix.com>
Closes #10650
2020-08-05 10:28:07 -07:00
Matthew Ahrens d519c10575 Remove KMC_NOHASH
Remove dead code to make the implementation easier to understand.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Ahrens <matt@delphix.com>
Closes #10650
2020-08-05 10:27:56 -07:00
Matthew Macy 47ed79ff60
Changes to make openzfs build within FreeBSD buildworld
A collection of header changes to enable FreeBSD to build
with vendored OpenZFS.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10635
2020-07-31 21:30:31 -07:00
Matthew Macy 5678d3f593
Prefix zfs internal endian checks with _ZFS
FreeBSD defines _BIG_ENDIAN BIG_ENDIAN _LITTLE_ENDIAN
LITTLE_ENDIAN on every architecture. Trying to do
cross builds whilst hiding this from ZFS has proven
extremely cumbersome.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10621
2020-07-28 13:02:49 -07:00
Matthew Macy f5b189f937
FreeBSD: Fixes required to build ZFS on PowerPC
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10622
2020-07-25 11:00:23 -07:00