Commit Graph

724 Commits

Author SHA1 Message Date
Brian Behlendorf 026f126b83
Linux 5.17 compat: GENHD_FL_EXT_DEVT / GENHD_FL_NO_PART_SCAN
As of the 5.17 kernel the GENHD_FL_EXT_DEVT flag has been removed
and the GENHD_FL_NO_PART_SCAN flag renamed GENHD_FL_NO_PART. Update
zvol_alloc() to set GENHD_FL_NO_PART for the newer kernels which
is sufficient.  The behavior for prior kernels remains unchanged.

1ebe2e5f ("block: remove GENHD_FL_EXT_DEVT")
46e7eac6 ("block: rename GENHD_FL_NO_PART_SCAN to GENHD_FL_NO_PART")

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #13294
Closes #13297
2022-04-19 10:38:04 -07:00
наб 3c69b539fe Forbid asctime{,_r}(), gmtime(), localtime()
ctime() is only used in binary main threads, which is fine

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13284
2022-04-05 09:45:46 -07:00
Riccardo Schirone 7d524c068d Linux 5.18 compat: use address_space_operations->readahead
->readpages was removed and replaced by ->readahead. Define
zpl_readahead for kernels that don't have ->readpages.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Riccardo Schirone <rschirone91@gmail.com>
Closes #13278
2022-04-04 09:35:24 -07:00
наб d30577c9dd fgrep -> grep -F
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13259
2022-04-01 17:58:11 -07:00
наб f63c9dc70a egrep -> grep -E
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13259
2022-04-01 17:58:07 -07:00
Andrew eebfd28e9d
Linux optimize access checks when ACL is trivial
Bypass check of ZFS aces if the ACL is trivial. When an ACL is
trivial its permissions are represented by the mode without any
loss of information. In this case, it is safe to convert the
access request into equivalent mode and then pass desired mask
and inode to generic_permission(). This has the added benefit
of also checking whether entries in a POSIX ACL on the file grant
the desired access.

This commit also skips the ACL check on looking up the xattr dir
since such restrictions don't exist in Linux kernel and it makes
xattr lookup behavior inconsistent between SA and file-based
xattrs. We also don't want to perform a POSIX ACL check while
looking up the POSIX ACL if for some reason it is located in
the xattr dir rather than an SA.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Andrew Walker <awalker@ixsystems.com>
Closes #13237
2022-04-01 09:53:54 -07:00
наб bc3f12bfac
config: user: check for <aio.h>
And always zpool_read_label_slow() on non-conformant libcs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13207
Closes #13254
2022-03-28 10:24:22 -07:00
наб 86690775b0 Linux 5.18 compat: replace genhd.h with blkdev.h includes
blkdev.h includes genhd.h since dawn of upstream git, so this is
globally safe

Upstream-commit: 322cbb50de711814c42fb088f6d31901502c711a ("block:
 remove genhd.h")

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13251
2022-03-28 09:52:55 -07:00
наб d1325b4fa2 Linux 5.18 compat: 4-argument bio_alloc()
bio_alloc(gfp_t gfp_mask, unsigned short nr_iovecs)

became

  bio_alloc(struct block_device *bdev, unsigned short nr_vecs,
            unsigned int opf, gfp_t gfp_mask)
passing NULL/0 continues previous behaviour

Upstream-commit: 07888c665b405b1cd3577ddebfeb74f4717a84c4 ("block:
 pass a block_device and opf to bio_alloc")

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13251
2022-03-28 09:51:59 -07:00
ColMelvin 3ce3d30532
RPM: Split out pam_zfs_key into separate package
Create a separate `pam_zfs_key` package for the PAM module components,
an optional addition to the deliverables, in much the same way as the
Python bindings are released as a separate `python#-pyzfs` package.

This makes it clear when the PAM module is shipped with the package,
since it's now in its own package.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Chris Lindee <chris.lindee+github@gmail.com>
Closes: #13026
2022-03-18 16:54:50 -07:00
наб 4629dfe963 config: always-arch: don't subst TARGET_CPU
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13225
2022-03-18 16:50:52 -07:00
наб bd0955cd8e config: always-arch: prune unused TARGET_CPU_*, add TARGET_CPU catch-all
This fixes (harmless) error spew from configuring on, e.g., armv6l

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13193
Closes #13225
2022-03-18 16:49:08 -07:00
наб d465fc5844 Forbid b{copy,zero,cmp}(). Don't include <strings.h> for <string.h>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12996
2022-03-15 15:13:48 -07:00
Brian Atkinson becc717f61
Adding ZERO_PAGE detection
On some architectures ZERO_PAGE is unavailable because it references
a GPL exported symbol of empty_zero_page. Originally e08b993 removed
the call to PAGE_ZERO(0) for assignment to the abd_zero_page. However,
a simple check can be done to avoid a kernel allocation and free for
the abd_zero_page if ZERO_PAGE is available.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #13199
2022-03-14 12:37:39 -07:00
Attila Fülöp ce7a5dbf4b
Linux x86 SIMD: factor out unneeded kernel dependencies
Cleanup the kernel SIMD code by removing kernel dependencies.

 - Replace XSTATE_XSAVE with our own XSAVE implementation for all
   kernels not exporting kernel_fpu{begin,end}(), see #13059

 - Replace union fpregs_state by a uint8_t * buffer and get the size
   of the buffer from the hardware via the CPUID instruction

 - Replace kernels xgetbv() by our own implementation which was
   already there for userspace.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #13102
2022-03-08 16:19:15 -08:00
Alejandro Colomar db7f1a91de
Use _Noreturn (C11; GNU89) properly
A function that returns with no value is a different thing from a
function that doesn't return at all.  Those are two orthogonal
concepts, commonly confused.

pthread_create(3) expects a pointer to a start routine that has a
very precise prototype:

    void *(*start_routine)(void *);

However, other thread functions, such as kernel ones, expect:

    void (*start_routine)(void *);

Providing a different one is incorrect, and has only been working
because the ABIs happen to produce a compatible function.

We should use '_Noreturn void', since it's the natural type, and
then provide a '_Noreturn void *' wrapper for pthread functions.

For consistency, replace most cases of __NORETURN or
__attribute__((noreturn)) by _Noreturn.  _Noreturn is understood
by -std=gnu89, so it should be safe to use everywhere.

Ref: https://github.com/openzfs/zfs/pull/13110#discussion_r808450136
Ref: https://software.codidact.com/posts/285972
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Closes #13120
2022-03-04 16:25:22 -08:00
наб 9e532d17f3 config: gcc != cc
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13145
Closes #13152
2022-02-26 11:28:26 -08:00
наб 1ea68b6d38 config: check for -Wno-cast-function-type
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13145
Closes #13152
2022-02-26 11:26:55 -08:00
Attila Fülöp 4d14a285b3
Linux 5.11 compat: x86 SIMD: fix kernel_fpu_{begin,end}() detection
Linux 5.11 changed kernel_fpu_begin() to an inlined function and
moved the functionality to kernel_fpu_begin_mask(). This breaks the
existing detection mechanism since it checks if kernel_fpu_begin is
an exported kernel symbol, which isn't the case for an inlined
function.

To avoid assumptions about internal implementation, replace
ZFS_LINUX_TEST_RESULT_SYMBOL in favor of  ZFS_LINUX_TEST_RESULT
which already makes sure kernel_fpu_{begin,end}() is usable by us.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #13147
2022-02-24 09:23:41 -08:00
наб a2995e7641 config: add -Wextra (sans sign-compare and missing-field-initializers)
Reviewed-by: Alejandro Colomar <alx.manpages@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13110
2022-02-18 09:35:02 -08:00
наб 4e1f1035d0 config: prune unused -Wno-bool-compare checks
Reviewed-by: Alejandro Colomar <alx.manpages@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13110
2022-02-18 09:34:37 -08:00
наб 72154bd6c9 libtpool: -Wno-clobbered
Also remove -Wno-unused-but-set-variable

Upstream-bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61118
Reviewed-by: Alejandro Colomar <alx.manpages@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13110
2022-02-18 09:34:25 -08:00
Damian Szuberski 72f3c8b130
Fix Linux kernel directories detection
Most modern Linux distributions have separate locations for bare
source and prebuilt ("build") files. Additionally, there are `source`
and `build` symlinks in `/lib/modules/$(KERNEL_VERSION)` pointing to
them. The order of directory search is now:
- `configure` command line values if both `--with-linux` and
  `--with-linux-obj` were defined
- If only `--with-linux` was defined, `--with-linux-obj` is assumed
  to have the same value as `--with-linux`
- If neither `--with-linux` nor `--with-linux-obj` were defined
  autodetection is used:
  - `/lib/modules/$(uname -r)/{source,build}` respectively, if exist
  - The first directory in `/lib/modules` with the highest version
    number according to `sort -V` which contains `source` and `build`
    symlinks/directories
  - The first directory matching `/usr/src/kernels/*` and
    `/usr/src/linux-*` with the highest version number according to
    `sort -V`. Here the source and prebuilt directories are assumed
    to be the same.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #9935
Closes #13096
2022-02-16 15:17:16 -08:00
Damian Szuberski ba6005175e
`checkabi`/`storeabi` relevant only to x86_64
The stored ABI files are for the x86_64 architecture.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #11345
Closes #13104
2022-02-16 11:48:01 -08:00
Damian Szuberski 4eea717c4f Propagate KERNEL_* to *.spec
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Damian Szuberski <szuberskidamian@gmail.com>
Signed-off-by: Peter Levine <plevine457@gmail.com>
Closes #13046
2022-02-09 13:27:11 -08:00
Peter Levine b66140c6ad Add support for $KERNEL_{CC,LD,LLVM} variables
Currently, $(CC), $(LD), and $(LLVM) variables aren't passed to kbuild
while building modules.  This causes modules to build with the default
GNU GCC toolchain and prevents experimenting with other toolchains such
as CLANG/LLVM.  It can also lead to build failure if the CFLAGS/LDFLAGS
passed are incompatible with gcc/ld.

Pass $KERNEL_CC, $KERNEL_LD, and $KERNEL_LLVM as $(CC), $(LD), and
$(LLVM), respectively, to kbuild for each that is defined in the
environment.  This should take care of the majority of alternative
toolchain use cases.

Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Peter Levine <plevine457@gmail.com>
Closes #13046
2022-02-09 13:24:22 -08:00
Attila Fülöp 8e94ac0e36
Linux 5.16 compat: don't use XSTATE_XSAVE to save FPU state
Linux 5.16 moved XSTATE_XSAVE and XSTATE_XRESTORE out of our reach,
so add our own XSAVE{,OPT,S} code and use it for Linux 5.16.

Please note that this differs from previous behavior in that it
won't handle exceptions created by XSAVE an XRSTOR. This is sensible
for three reasons.

 - Exceptions during XSAVE and XRSTOR can only occur if the feature
   is not supported or enabled or the memory operand isn't aligned
   on a 64 byte boundary. If this happens something else went
   terribly wrong, and it may be better to stop execution.

 - Previously we just printed a warning and didn't handle the fault,
   this is arguable for the above reason.

 - All other *SAVE instruction also don't handle exceptions, so this
   at least aligns behavior.

Finally add a test to catch such a regression in the future.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #13042
Closes #13059
2022-02-09 12:50:10 -08:00
Damian Szuberski 8df0bde321
Add `--enable=all` to ShellCheck by default
Change enforced shell type from `dash` to `sh` and excluded
`SC2039` and `SC3043` by default. `local` keyword is accepted by all
POSIX shells from practical point of view. There is no need anymore
to enforce dash so `local` is accepted.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #13020
2022-02-07 11:59:09 -08:00
Damian Szuberski 63652e1546
Add `--enable-asan` and `--enable-ubsan` switches
`configure` now accepts `--enable-asan` and `--enable-ubsan` switches
which results in passing `-fsanitize=address`
and `-fsanitize=undefined`, respectively, to the compiler. Those
flags are enabled in GitHub workflows for ZTS and zloop. Errors
reported by both instrumentations are corrected, except for:

- Memory leak reporting is (temporarily) suppressed. The cost of
  fixing them is relatively high compared to the gains.

- Checksum computing functions in `module/zcommon/zfs_fletcher*`
  have UBSan errors suppressed. It is completely impractical
  to enforce 64-byte payload alignment there due to performance
  impact.

- There's no ASan heap poisoning in `module/zstd/lib/zstd.c`. A custom
  memory allocator is used there rendering that measure
  unfeasible.

- Memory leaks detection has to be suppressed for `cmd/zvol_id`.
  `zvol_id` is run by udev with the help of `ptrace(2)`. Tracing is
  incompatible with memory leaks detection.

Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12928
2022-02-03 14:35:38 -08:00
наб 5dccd7e8f3 Linux 5.17 compat: PDE_DATA() renamed to pde_data()
Upstream commit 359745d78351c6f5442435f81549f0207ece28aa
("proc: remove PDE_DATA() completely")

Link: https://lore.kernel.org/all/20211124081956.87711-2-songmuchun@bytedance.com/T/#u

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13004
Closes #12989
2022-01-25 12:53:00 -08:00
наб a46237106c Linux 5.17 compat: dequeue_signal() takes a 4th argument
Linux 5.17's dequeue_signal() takes an additional enum pid_type *
output argument

Upstream commit 5768d8906bc23d512b1a736c1e198aa833a6daa4
("signal: Requeue signals in the appropriate queue")

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12989
2022-01-25 12:52:51 -08:00
наб a9856574cf Linux 5.17 compat: detect complete_and_exit() rename
Linux 5.17 sees a rename from complete_and_exit()
to kthread complete_and_exit()

Upstream commit cead18552660702a4a46f58e65188fe5f36e9dfe
("exit: Rename complete_and_exit to kthread_complete_and_exit")

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12989
2022-01-25 12:52:12 -08:00
Rich Ercolani 4372e96f4b Add support for FALLOC_FL_ZERO_RANGE
For us, I think it's always just FALLOC_FL_PUNCH_HOLE with a fake
mustache on.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Coleman Kane <ckane@colemankane.org>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12975
2022-01-24 12:59:25 -08:00
Rich Ercolani 299fbf75ec Linux 5.16 compat: Added mapping for iov_iter_fault_in_readable
Linux decided to rename this for some reason. At some point, we
should probably invert this mapping, but for now...

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Coleman Kane <ckane@colemankane.org>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12975
2022-01-24 12:59:09 -08:00
Rich Ercolani 12fa250d84 Linux 5.16 compat: Added add_disk check for return
add_disk went from void to must-check int return.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Coleman Kane <ckane@colemankane.org>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12975
2022-01-24 12:59:01 -08:00
Rich Ercolani e86f88aa0b Linux 5.16 compat: Check slab.h for kvmalloc
As it says on the tin - the folio work moved a bunch out of mm.h.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Coleman Kane <ckane@colemankane.org>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12975
2022-01-24 12:57:50 -08:00
Damian Szuberski 8a7c4efd3c
Removed Python 2 and Python 3.5- support
Deprecation of Python versions below 3.6 gives opportunity to unify the
build and install requirements for OpenZFS packages. The minimal
supported Python version is 3.6 as this is the most recent Python
package CentOS/RHEL 7 users can get.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12925
2022-01-13 09:51:12 -07:00
Rich Ercolani d6c1bbdd65
Updated the lz4 decompressor
As an experiment, I stole the lz4 decompressor from
upstream lz4 (1.9.3), and landed it.

Feedback suggested that keeping the vendor lz4 code isolated and
unlinted was probably reasonable, so I lobbed it into its own file.

It also seemed reasonable to put the mostly-untouched* code into
lz4.c proper, and relegate the integrated and ZFS-specific code to
lz4_zfs.c.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12805
2022-01-07 10:36:49 -08:00
наб f788aaeb0e config: check for parallel(1), use it for cstyle
Before:
$ time make cstyle
real    0m23.118s
user    0m23.002s
sys     0m0.114s

After:
$ time make cstyle
real    0m4.577s
user    0m31.487s
sys     0m0.699s

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12899
2022-01-06 12:46:42 -08:00
наб 95aab0b7d2
libfetch: unquote @LIBFETCH_SONAME@ subst
@LIBFETCH_SONAME@ is no longer quoted. The C define still is.

Ref: 153f7c9f72
Ref: https://github.com/openzfs/zfs/pull/12835#discussion_r776833743
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12922
2022-01-06 11:26:40 -08:00
Coleman Kane 1e767532f2 Linux 5.16: The blk-cgroup.h header is where struct blkcg_gq is defined
The definition of struct blkcg_gq was moved into blk-cgroup.h, which is
a header that's been in Linux since 2015. This is used by
vdev_blkg_tryget() in module/os/linux/zfs/vdev_disk.c. Since the kernel
for CentOS 7 and similar-generation releases doesn't have this header,
its inclusion is guarded by a configure test.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 12:28:12 -08:00
Coleman Kane d08b99aca0 Linux 5.16: bio_set_dev is no longer a helper macro
This change adds a confiugre check to determine if bio_set_dev is a
helper macro or not. If not, then the attempt to override its internal
call to bio_associate_blkg(), with a macro definition to our own
version, is no longer possible, as the compiler won't use it when
compiling the new inline function replacement implemented in the header.
This change also creates a new vdev_bio_set_dev() function that performs
the same work, and also performs the work implemented in
vdev_bio_associate_blkg(), as it is the only thing calling that function
in our code. Our custom vdev_bio_associate_blkg() is now only compiled
if the bio_set_dev() is a macro in the Linux headers.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 12:28:00 -08:00
Coleman Kane f6e22561d2 Linux 5.16: type member of iov_iter renamed iter_type
The iov_iter->type member was renamed iov_iter->iter_type. However,
while looking into this, realized that in 2018 a iov_iter_type(*iov)
accessor function was introduced. So if that is present, use it,
otherwise fall back to trying the existing behavior of directly
accessing type from iov_iter.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 12:27:49 -08:00
Coleman Kane 435a451e5c Linux 5.16: block_device_operations->submit_bio now returns void
The return type for the submit_bio member of struct
block_device_operations was changed to no longer return a value.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12819
2021-12-07 12:27:27 -08:00
Brian Behlendorf 77e2756de0
Linux 5.13 compat: retry zvol_open() when contended
Due to a possible lock inversion the zvol open call path on Linux
needs to be able to retry in the case where the spa_namespace_lock
cannot be acquired.

For Linux 5.12 an older kernel this was accomplished by returning
-ERESTARTSYS from zvol_open() to request that blkdev_get() drop
the bdev->bd_mutex lock, reaquire it, then call the open callback
again.  However, as of the 5.13 kernel this behavior was removed.

Therefore, for 5.12 and older kernels we preserved the existing
retry logic, but for 5.13 and newer kernels we retry internally in
zvol_open().  This should always succeed except in the case where
a pool's vdev are layed on zvols, in which case it may fail.  To
handle this case vdev_disk_open() has been updated to retry when
opening a device when -ERESTARTSYS is returned.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #12301
Closes #12759
2021-12-01 17:07:12 -07:00
Damian Szuberski 34eef3e9a7
Pass `--enable=all` to shellcheck within contrib/
- Remove `SHELLCHECK_IGNORE` in favor of inline suppressions
  and more general `SHELLCHECK_OPTS`.

- Exclude `SC2250` (turned on by `--enable=all`) globally

- Pass `--enable=all` to shellcheck for scripts in contrib/: it's
  very important to catch errors early in areas that are not easily
  testable.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12760
2021-11-30 10:23:10 -08:00
Coleman Kane 75b309a938 Linux 5.16 compat: asm/fpu/xcr.h is new location for xgetbv/xsetbv
Linux 5.16 moved these functions into this new header in commit
1b4fb8545f2b00f2844c4b7619d64d98440a477c. This change adds code to look
for the presence of this header, and include it so that the code using
xgetbv & xsetbv will compile again.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12800
2021-11-29 10:49:33 -08:00
Coleman Kane c0fb44c506 Linux 5.16: wait_on_page_bit() no longer available to modules
Instead, linux/pagemap.h offers a number of folio-specific functions to
be called instead. In this case, module/os/linux/zfs/zfs_vnops_os.c
wants to call wait_on_page_bit(pp, PG_writeback). This gets replaced
with folio_wait_bit(folio_page(pp), PG_writeback). This change modifies
the code to conditionally compile that if configure identifies th
presence of the folio_wait_bit() function.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12800
2021-11-29 10:48:52 -08:00
наб 420b44488f
Remove basename(1). Clean up/shorten some coreutils pipelines
Basenames that remain, in cmd/zed/zed.d/statechange-led.sh:
	dev=$(basename "$(echo "$therest" | awk '{print $(NF-1)}')")
	vdev=$(basename "$ZEVENT_VDEV_PATH")
I don't wanna interfere with #11988

scripts/zfs-tests.sh:
	SINGLETESTFILE=$(basename "$SINGLETEST")
tests/zfs-tests/tests/functional/cli_user/zfs_list/zfs_list.kshlib:
	ACTUAL=$(basename $dataset)
	ACTUAL=$(basename $dataset)
tests/zfs-tests/tests/functional/cli_user/zpool_iostat/
	zpool_iostat_-c_homedir.ksh:
	typeset USER_SCRIPT=$(basename "$USER_SCRIPT_FULL")
tests/zfs-tests/tests/functional/cli_user/zpool_iostat/
	zpool_iostat_-c_searchpath.ksh:
	typeset CMD_1=$(basename "$SCRIPT_1")
	typeset CMD_2=$(basename "$SCRIPT_2")
tests/zfs-tests/tests/functional/cli_user/zpool_status/
	zpool_status_-c_homedir.ksh:
	typeset USER_SCRIPT=$(basename "$USER_SCRIPT_FULL")
tests/zfs-tests/tests/functional/cli_user/zpool_status/
	zpool_status_-c_searchpath.ksh
	typeset CMD_1=$(basename "$SCRIPT_1")
	typeset CMD_2=$(basename "$SCRIPT_2")
tests/zfs-tests/tests/functional/migration/migration.cfg:
	export BNAME=`basename $TESTFILE`
tests/zfs-tests/tests/perf/perf.shlib:
	typeset logbase="$(get_perf_output_dir)/$(basename \
tests/zfs-tests/tests/perf/perf.shlib:
	typeset logbase="$(get_perf_output_dir)/$(basename \

These are potentially Of Directories, where basename is actually
useful

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12652
2021-11-11 13:27:37 -07:00
Brian Behlendorf 453c63e9b7 Linux 5.16 compat: submit_bio()
The submit_bio() prototype has changed again.  The version is 5.16
still only expects a single argument but the return type has changed
to void.  Since we never used the returned value before update the
configure check to detect both single arg versions.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12725
2021-11-09 11:27:46 -08:00