Commit Graph

196 Commits

Author SHA1 Message Date
George Amanakis 0409d33273
Improve zpool status output, list all affected datasets
Currently, determining which datasets are affected by corruption is
a manual process.

The primary difficulty in reporting the list of affected snapshots is
that since the error was initially found, the snapshot where the error
originally occurred in, may have been deleted. To solve this issue, we
add the ID of the head dataset of the original snapshot which the error
was detected in, to the stored error report. Then any time a filesystem
is deleted, the errors associated with it are deleted as well. Any time
a clone promote occurs, we modify reports associated with the original
head to refer to the new head. The stored error reports are identified
by this head ID, the birth time of the block which the error occurred
in, as well as some information about the error itself are also stored.

Once this information is stored, we can find the set of datasets
affected by an error by walking back the list of snapshots in the given
head until we find one with the appropriate birth txg, and then traverse
through the snapshots of the clone family, terminating a branch if the
block was replaced in a given snapshot. Then we report this information
back to libzfs, and to the zpool status command, where it is displayed
as follows:

 pool: test
 state: ONLINE
status: One or more devices has experienced an error resulting in data
        corruption.  Applications may be affected.
action: Restore the file in question if possible.  Otherwise restore the
        entire pool from backup.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
  scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec  3
08:27:57 2021
config:

        NAME        STATE     READ WRITE CKSUM
        test        ONLINE       0     0     0
          sdb       ONLINE       0     0 1.58K

errors: Permanent errors have been detected in the following files:

        test@1:/test.0.0
        /test/test.0.0
        /test/1clone/test.0.0

A new feature flag is introduced to mark the presence of this change, as
well as promotion and backwards compatibility logic. This is an updated
version of . Rebase required fixing the tests, updating the ABI of
libzfs, updating the man pages, fixing bugs, fixing the error returns,
and updating the old on-disk error logs to the new format when
activating the feature.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain <tulsi.jain@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes 
Closes 
2022-04-25 17:25:42 -07:00
наб ad9e767657 linux: module: weld all but spl.ko into zfs.ko
Originally it was thought it would be useful to split up the kmods
by functionality.  This would allow external consumers to only load
what was needed.  However, in practice we've never had a case where
this functionality would be needed, and conversely managing multiple
kmods can be awkward.  Therefore, this change merges all but the
spl.ko kmod in to a single zfs.ko kmod.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-04-20 13:28:24 -07:00
наб 9292cf761e
Fix string/index variables being unflexed by default
I got the status backward (B_FALSE for fixed, rather than B_TRUE for
flex); before:

  $ zfs get mountpoint tarta-zoot -r
  NAME                                 PROPERTY    VALUE       SOURCE
  tarta-zoot                           mountpoint  /           local
  tarta-zoot/PAGEFILE.SYS              mountpoint  -           -
  tarta-zoot/etc                       mountpoint  /etc        inherited from tarta-zoot
  tarta-zoot/home                      mountpoint  /home       inherited from tarta-zoot
  tarta-zoot/home/xspon                mountpoint  /home/xspon  inherited from tarta-zoot
  tarta-zoot/home/nabijaczleweli       mountpoint  /home/nabijaczleweli  inherited from tarta-zoot
  tarta-zoot/home/nabijaczleweli/tftp  mountpoint  /home/nabijaczleweli/tftp  inherited from tarta-zoot
  tarta-zoot/home/root                 mountpoint  /root       local

after:

  $ zfs get mountpoint tarta-zoot -r
  NAME                                 PROPERTY    VALUE                      SOURCE
  tarta-zoot                           mountpoint  /                          local
  tarta-zoot/PAGEFILE.SYS              mountpoint  -                          -
  tarta-zoot/etc                       mountpoint  /etc                       inherited from tarta-zoot
  tarta-zoot/home                      mountpoint  /home                      inherited from tarta-zoot
  tarta-zoot/home/xspon                mountpoint  /home/xspon                inherited from tarta-zoot
  tarta-zoot/home/nabijaczleweli       mountpoint  /home/nabijaczleweli       inherited from tarta-zoot
  tarta-zoot/home/nabijaczleweli/tftp  mountpoint  /home/nabijaczleweli/tftp  inherited from tarta-zoot
  tarta-zoot/home/root                 mountpoint  /root                      local

Fixes: be8e1d81bf ("Flex
 non-pretty-printed properties and raw-/pretty-print remaining ones")
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-04-05 09:34:46 -07:00
наб d465fc5844 Forbid b{copy,zero,cmp}(). Don't include <strings.h> for <string.h>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-03-15 15:13:48 -07:00
наб 861166b027 Remove bcopy(), bzero(), bcmp()
bcopy() has a confusing argument order and is actually a move, not a
copy; they're all deprecated since POSIX.1-2001 and removed in -2008,
and we shim them out to mem*() on Linux anyway

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-03-15 15:13:42 -07:00
Attila Fülöp ce7a5dbf4b
Linux x86 SIMD: factor out unneeded kernel dependencies
Cleanup the kernel SIMD code by removing kernel dependencies.

 - Replace XSTATE_XSAVE with our own XSAVE implementation for all
   kernels not exporting kernel_fpu{begin,end}(), see 

 - Replace union fpregs_state by a uint8_t * buffer and get the size
   of the buffer from the hardware via the CPUID instruction

 - Replace kernels xgetbv() by our own implementation which was
   already there for userspace.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes 
2022-03-08 16:19:15 -08:00
наб be8e1d81bf Flex non-pretty-printed properties and raw-/pretty-print remaining ones
Before:
nabijaczleweli@tarta:~/store/code/zfs$ /sbin/zpool list -Td -o name,size,alloc,free,ckpoint,expandsz,guid,load_guid,frag,cap,dedup,health,altroot,guid,dedupditto,load_guid,maxblocksize,maxdnodesize 2>/dev/null
Sun 20 Feb 03:57:44 CET 2022
NAME         SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   GUID  LOAD_GUID   FRAG    CAP  DEDUP    HEALTH  ALTROOT   GUID  DEDUPDITTO  LOAD_GUID  MAXBLOCKSIZE  MAXDNODESIZE
filling     25.5T  6.52T  18.9T        -       64M  11512889483096932869  11656109927366648364     1%    25%  1.00x    ONLINE  -        11512889483096932869           0  11656109927366648364       1048576         16384
tarta-boot   240M  50.6M   189M        -         -  2372068846917849656  7752280792179633787    12%    21%  1.00x    ONLINE  -        2372068846917849656           0  7752280792179633787       1048576           512
tarta-zoot  55.5G  6.42G  49.1G        -         -  12971868889665384604  8622632123393589527    17%    11%  1.00x    ONLINE  -        12971868889665384604           0  8622632123393589527       1048576         16384

nabijaczleweli@tarta:~/store/code/zfs$ /sbin/zfs list -o name,guid,keyguid,ivsetguid,createtxg,objsetid,pbkdf2iters,refratio -r tarta-zoot
NAME                                  GUID  KEYGUID  IVSETGUID  CREATETXG  OBJSETID  PBKDF2ITERS  REFRATIO
tarta-zoot                           1110930838977259561     659P          -          1        54            0     1.03x
tarta-zoot/PAGEFILE.SYS              2202570496672997800    3.20E          -       2163      1539            0     1.07x
tarta-zoot/dupa                      16941280502417785695    9.81E          -    2274707      1322  1000000000000     1.00x
tarta-zoot/etc                       17029963068508333530    12.9E          -       3663      1087            0     1.52x
tarta-zoot/home                      3508163802370032575    8.50E          -       3664       294            0     1.00x
tarta-zoot/home/misio                7283672744014848555    13.0E          -       3665       302            0     2.28x
tarta-zoot/home/nabijaczleweli       12286744508078616303    5.15E          -       3666       200            0     2.05x
tarta-zoot/home/nabijaczleweli/tftp  13551632689932817643    5.16E          -       3667      1095            0     1.00x
tarta-zoot/home/root                 5203106193060067946    15.4E          -       3668       698            0     2.86x
tarta-zoot/home/shared-config        8866040021005142194    14.5E          -       3670      2069            0     1.20x
tarta-zoot/home/tymek                9472751824283011822    4.56E          -       3671      1202            0     1.32x
tarta-zoot/oldboot                   10460192444135730377    13.8E          -    2268398      1232            0     1.01x
tarta-zoot/opt                       9945621324983170410    5.84E          -       3672      1210            0     1.00x
tarta-zoot/opt/icecc                 13178238931846132425    9.04E          -       3673      1103            0     2.83x
tarta-zoot/opt/swtpm                 10172962421514870859    4.13E          -     825669    145132            0     1.87x
tarta-zoot/srv                       217179989022738337    3.90E          -       3674      2469            0     1.00x
tarta-zoot/usr                       12214213243060765090    15.0E          -       3675      2477            0     2.58x
tarta-zoot/usr/local                 7542700368693813134     941P          -       3676      2484            0     2.33x
tarta-zoot/var                       13414177124447929530    10.2E          -       3677      2492            0     1.57x
tarta-zoot/var/lib                   6969944550407159241    5.28E          -       3678      2499            0     2.34x
tarta-zoot/var/tmp                   6399468088048343912    1.34E          -       3679      1218            0     3.95x

After:
nabijaczleweli@tarta:~/store/code/zfs$ cmd/zpool/zpool list -Td -o name,size,alloc,free,ckpoint,expandsz,guid,load_guid,frag,cap,dedup,health,altroot,guid,dedupditto,load_guid,maxblocksize,maxdnodesize 2>/dev/null
Sun 20 Feb 03:57:42 CET 2022
NAME         SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ                  GUID             LOAD_GUID   FRAG    CAP  DEDUP    HEALTH  ALTROOT                  GUID  DEDUPDITTO             LOAD_GUID  MAXBLOCKSIZE  MAXDNODESIZE
filling     25.5T  6.52T  18.9T        -       64M  11512889483096932869  11656109927366648364     1%    25%  1.00x    ONLINE  -        11512889483096932869           0  11656109927366648364            1M           16K
tarta-boot   240M  50.6M   189M        -         -   2372068846917849656   7752280792179633787    12%    21%  1.00x    ONLINE  -         2372068846917849656           0   7752280792179633787            1M           512
tarta-zoot  55.5G  6.42G  49.1G        -         -  12971868889665384604   8622632123393589527    17%    11%  1.00x    ONLINE  -        12971868889665384604           0   8622632123393589527            1M           16K

nabijaczleweli@tarta:~/store/code/zfs$ cmd/zfs/zfs list -o name,guid,keyguid,ivsetguid,createtxg,objsetid,pbkdf2iters,refratio -r tarta-zoot
NAME                                                 GUID               KEYGUID  IVSETGUID  CREATETXG  OBJSETID    PBKDF2ITERS  REFRATIO
tarta-zoot                            1110930838977259561    741529699813639505          -          1        54              0     1.03x
tarta-zoot/PAGEFILE.SYS               2202570496672997800   3689529982640017884          -       2163      1539              0     1.07x
tarta-zoot/dupa                      16941280502417785695  11312442953423259518          -    2274707      1322  1000000000000     1.00x
tarta-zoot/etc                       17029963068508333530  14852574366795347233          -       3663      1087              0     1.52x
tarta-zoot/home                       3508163802370032575   9802810070759776956          -       3664       294              0     1.00x
tarta-zoot/home/misio                 7283672744014848555  14983161489316798151          -       3665       302              0     2.28x
tarta-zoot/home/nabijaczleweli       12286744508078616303   5937870537299886218          -       3666       200              0     2.05x
tarta-zoot/home/nabijaczleweli/tftp  13551632689932817643   5950522828900813054          -       3667      1095              0     1.00x
tarta-zoot/home/root                  5203106193060067946  17718025091255443518          -       3668       698              0     2.86x
tarta-zoot/home/shared-config         8866040021005142194  16716354482778968577          -       3670      2069              0     1.20x
tarta-zoot/home/tymek                 9472751824283011822   5251854710505749954          -       3671      1202              0     1.32x
tarta-zoot/oldboot                   10460192444135730377  15894065034622168157          -    2268398      1232              0     1.01x
tarta-zoot/opt                        9945621324983170410   6737735639539098405          -       3672      1210              0     1.00x
tarta-zoot/opt/icecc                 13178238931846132425  10425145983015238428          -       3673      1103              0     2.83x
tarta-zoot/opt/swtpm                 10172962421514870859   4764783754852521469          -     825669    145132              0     1.87x
tarta-zoot/srv                         217179989022738337   4492810461439647259          -       3674      2469              0     1.00x
tarta-zoot/usr                       12214213243060765090  17306702395865262834          -       3675      2477              0     2.58x
tarta-zoot/usr/local                  7542700368693813134   1059954157997659784          -       3676      2484              0     2.33x
tarta-zoot/var                       13414177124447929530  11764397504176937123          -       3677      2492              0     1.57x
tarta-zoot/var/lib                    6969944550407159241   6084753728494937404          -       3678      2499              0     2.34x
tarta-zoot/var/tmp                    6399468088048343912   1548692824635344277          -       3679      1218              0     3.95x

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
Closes 
2022-03-04 12:08:33 -08:00
наб a9a89755fa module: zcommon: zprop: common: zprop_width: namespace exceptions
Before this, /all/ numerical properties 1 (ZFS_PROP_CREATION,
ZPOOL_PROP_SIZE, VDEV_PROP_CAPACITY) would be non-fixed and
/all/ numerical properties 5 (ZFS_PROP_COMPRESSRATIO,
ZPOOL_PROP_HEALTH, VDEV_PROP_PSIZE) would be 8-wide

Realistically, this doesn't appear to be much of a problem

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-03-04 12:08:30 -08:00
Jitendra Patidar 361a7e8211
log xattr=sa create/remove/update to ZIL
As such, there are no specific synchronous semantics defined for
the xattrs. But for xattr=on, it does log to ZIL and zil_commit() is
done, if sync=always is set on dataset. This provides sync semantics
for xattr=on with sync=always set on dataset.

For the xattr=sa implementation, it doesn't log to ZIL, so, even with
sync=always, xattrs are not guaranteed to be synced before xattr call
returns to caller. So, xattr can be lost if system crash happens, before
txg carrying xattr transaction is synced.

This change adds xattr=sa logging to ZIL on xattr create/remove/update
and xattrs are synced to ZIL (zil_commit() done) for sync=always.
This makes xattr=sa behavior similar to xattr=on.

Implementation notes:
The actual logging is fairly straight-forward and does not warrant
additional explanation.
However, it has been 14 years since we last added new TX types
to the ZIL [1], hence this is the first time we do it after the
introduction of zpool features. Therefore, here is an overview of the
feature activation and deactivation workflow:

1. The feature must be enabled. Otherwise, we don't log the new
    record type. This ensures compatibility with older software.
2. The feature is activated per-dataset, since the ZIL is per-dataset.
3. If the feature is enabled and dataset is not for zvol, any append to
    the ZIL chain will activate the feature for the dataset. Likewise
    for starting a new ZIL chain.
4. A dataset that doesn't have a ZIL chain has the feature deactivated.

We ensure (3) by activating on the first zil_commit() after the feature
was enabled. Since activating the features requires waiting for txg
sync, the first zil_commit() after enabling the feature will be slower
than usual. The downside is that this is really a conservative
approximation: even if we never append a 'TX_SETSAXATTR' to the ZIL
chain, we pay the penalty for feature activation. The upside is that the
user is in control of when we pay the penalty, i.e., upon enabling the
feature.

We ensure (4) by hooking into zil_sync(), where ZIL destroy actually
happens.

One more piece on feature activation, since it's spread across
multiple functions:

zil_commit()
  zil_process_commit_list()
    if lwb == NULL // first zil_commit since zil_open
      zil_create()
        if no log block pointer in ZIL header:
          if feature enabled and not active:
	    // CASE 1
            enable, COALESCE txg wait with dmu_tx that allocated the
	    log block
         else // log block was allocated earlier than this zil_open
          if feature enabled and not active:
	    // CASE 2
            enable, EXPLICIT txg wait
    else // already have an in-DRAM LWB
      if feature enabled and not active:
        // this happens when we enable the feature after zil_create
	// CASE 3
        enable, EXPLICIT txg wait

[1] da6c28aaf6

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes  
Closes 
2022-02-22 13:06:43 -08:00
Attila Fülöp 8e94ac0e36
Linux 5.16 compat: don't use XSTATE_XSAVE to save FPU state
Linux 5.16 moved XSTATE_XSAVE and XSTATE_XRESTORE out of our reach,
so add our own XSAVE{,OPT,S} code and use it for Linux 5.16.

Please note that this differs from previous behavior in that it
won't handle exceptions created by XSAVE an XRSTOR. This is sensible
for three reasons.

 - Exceptions during XSAVE and XRSTOR can only occur if the feature
   is not supported or enabled or the memory operand isn't aligned
   on a 64 byte boundary. If this happens something else went
   terribly wrong, and it may be better to stop execution.

 - Previously we just printed a warning and didn't handle the fault,
   this is arguable for the above reason.

 - All other *SAVE instruction also don't handle exceptions, so this
   at least aligns behavior.

Finally add a test to catch such a regression in the future.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes 
Closes 
2022-02-09 12:50:10 -08:00
Damian Szuberski 63652e1546
Add `--enable-asan` and `--enable-ubsan` switches
`configure` now accepts `--enable-asan` and `--enable-ubsan` switches
which results in passing `-fsanitize=address`
and `-fsanitize=undefined`, respectively, to the compiler. Those
flags are enabled in GitHub workflows for ZTS and zloop. Errors
reported by both instrumentations are corrected, except for:

- Memory leak reporting is (temporarily) suppressed. The cost of
  fixing them is relatively high compared to the gains.

- Checksum computing functions in `module/zcommon/zfs_fletcher*`
  have UBSan errors suppressed. It is completely impractical
  to enforce 64-byte payload alignment there due to performance
  impact.

- There's no ASan heap poisoning in `module/zstd/lib/zstd.c`. A custom
  memory allocator is used there rendering that measure
  unfeasible.

- Memory leaks detection has to be suppressed for `cmd/zvol_id`.
  `zvol_id` is run by udev with the help of `ptrace(2)`. Tracing is
  incompatible with memory leaks detection.

Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes 
2022-02-03 14:35:38 -08:00
наб 7ada752a93 Clean up CSTYLEDs
69 CSTYLED BEGINs remain, appx. 30 of which can be removed if cstyle(1)
had a useful policy regarding
  CALL(ARG1,
  	ARG2,
  	ARG3);
above 2 lines. As it stands, it spits out *both*
  sysctl_os.c: 385: continuation line should be indented by 4 spaces
  sysctl_os.c: 385: indent by spaces instead of tabs
which is very cool

Another >10 could be fixed by removing "ulong" &al. handling.
I don't foresee anyone actually using it intentionally
(does it even exist in modern headers? why did it in the first place?).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-01-26 11:38:52 -08:00
наб 18168da727
module/*.ko: prune .data, global .rodata
Evaluated every variable that lives in .data (and globals in .rodata)
in the kernel modules, and constified/eliminated/localised them
appropriately. This means that all read-only data is now actually
read-only data, and, if possible, at file scope. A lot of previously-
global-symbols became inlinable (and inlined!) constants. Probably
not in a big Wowee Performance Moment, but hey.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-01-14 15:37:55 -08:00
наб dac85132c6 module: zcommon: zprop: fix unused, remove argsused
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2021-12-23 09:42:47 -08:00
наб 1f182103aa libzfs: fix unused, remove argsused
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2021-12-23 09:42:47 -08:00
наб eb51a9d747
zcommon: pre-iterate over sysfs instead of statting every feature
If sufficient memory (<2K, realistically) is available, libzfs_init()
can be significantly shorted by iterating over the correct sysfs
directory before registrations, we can turn 168 stats into 15/18
syscalls (3 opens (6 if built in), 3 fstats, 6 getdentses, and 3
closes), a tenfoldish reduction; this is probably a bit faster, too.

The list is always optional, and registration functions (and one-off
users) can simply pass NULL, which will fall back to the previous
mechanism

Also, don't allocate in zfs_mod_supported_impl, and use use access()
instead of stat(), since existence is really what we care about

Also, fix pre-prop-checking compat in fallback for built-in ZFS

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2021-12-16 16:43:10 -08:00
наб 8fdc6f618c
zcommon: *_prop: make all zprop_index_t tables const
They're already static, and there's no point in them being R/W
and living outside .rodata

Reviewed-by: RageLtMan <rageltman@sempervictus>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2021-12-16 13:26:04 -08:00
наб 510885a84c
FreeBSD supports edonr follow up
This chases 269b5dadcf (),
which touched the actual code but didn't fix the comment

Additionally, ignore the name.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2021-12-08 17:01:36 -08:00
Allan Jude 2a673e76a9
Vdev Properties Feature
Add properties, similar to pool properties, to each vdev.
This makes use of the existing per-vdev ZAP that was added as
part of device evacuation/removal.

A large number of read-only properties are exposed,
many of the members of struct vdev_t, that provide useful
statistics.

Adds support for read-only "removing" vdev property.
Adds the "allocating" property that defaults to "on" and
can be set to "off" to prevent future allocations from that
top-level vdev.

Supports user-defined vdev properties.
Includes support for properties.vdev in SYSFS.

Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes 
2021-11-30 07:46:25 -07:00
Rich Ercolani 269b5dadcf
Enable edonr in FreeBSD
The code is integrated, builds fine, runs fine, there's not really
any reason not to.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes 
2021-11-16 12:40:10 -07:00
наб 37086897b0
libzfs: add keylocation=https://, backed by fetch(3) or libcurl
Add support for http and https to the keylocation properly to
allow encryption keys to be fetched from the specified URL.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue 
Closes  
Closes 
2021-05-12 21:21:35 -07:00
Romain Dolbeau 0375465536
Fix AVX512BW Fletcher code on AVX512-but-not-BW machines
Introduce a specific valid function for avx512f+avx512bw (instead 
of checking only for avx512f).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: Romain Dolbeau <romain@dolbeau.org>
Closes 
Closes 
2021-04-26 12:42:42 -07:00
Andrea Gelmini bf169e9f15 Fix various typos
Correct an assortment of typos throughout the code base.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes 
2021-04-02 18:52:15 -07:00
Ryan Moeller c05eec32a7
Allow pool names that look like Solaris disk names
Nothing bad happens if a prefix of your pool name matches a disk name.
This is a bit of a silly restriction at this point.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes  
Closes 
2021-04-01 08:49:41 -07:00
Jake Howard 3242b5358e
Add "zstd-fast" to help options for "compression" property
This value does work as expected, and is documented in the manpage.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jake Howard <git@theorangeone.net>
Closes 
2021-03-03 08:14:19 -08:00
Martin Matuška 03ef8f09e1
Add missing checks for unsupported features
After 35ec517 it has become possible to import ZFS pools witn an
active org.illumos:edonr feature on FreeBSD, leading to a panic.

In addition, "zpool status" reported all pools without edonr
as upgradable and "zpool upgrade -v" reported edonr in the list
of upgradable features.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes 
2021-02-27 17:16:02 -08:00
Colm 658fb8020f
Add "compatibility" property for zpool feature sets
Property to allow sets of features to be specified; for compatibility
with specific versions / releases / external systems. Influences
the behavior of 'zpool upgrade' and 'zpool create'. Initial man
page changes and test cases included.

Brief synopsis:

zpool create -o compatibility=off|legacy|file[,file...] pool vdev...

compatibility = off : disable compatibility mode (enable all features)
compatibility = legacy : request that no features be enabled
compatibility = file[,file...] : read features from specified files.
Only features present in *all* files will be enabled on the
resulting pool. Filenames may be absolute, or relative to
/etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc
checked first).

Only affects zpool create, zpool upgrade and zpool status.

ABI changes in libzfs:

* New function "zpool_load_compat" to load and parse compat sets.
* Add "zpool_compat_status_t" typedef for compatibility parse status.
* Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum
* Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum

An initial set of base compatibility sets are included in
cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is
modified to install these in $pkgdatadir/compatibility.d and to
create symbolic links to a reasonable set of aliases.

Reviewed-by: ericloewe
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes 
2021-02-17 21:30:45 -08:00
Brian Behlendorf 35ec51796f
FreeBSD: disable edonr in zfs_mod_supported_feature()
Rather than conditionally compiling out the edonr code for FreeBSD
update zfs_mod_supported_feature() to indicate this feature is
unsupported.  This ensures that all spa features are defined on
every platform, even if they are not supported.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes  
Issue 
2021-02-17 08:14:51 -08:00
Brian Behlendorf 1c2358c12a
Linux 5.10 compat: use iov_iter in uio structure
As of the 5.10 kernel the generic splice compatibility code has been
removed.  All filesystems are now responsible for registering a
->splice_read and ->splice_write callback to support this operation.

The good news is the VFS provided generic_file_splice_read() and
iter_file_splice_write() callbacks can be used provided the ->iter_read
and ->iter_write callback support pipes.  However, this is currently
not the case and only iovecs and bvecs (not pipes) are ever attached
to the uio structure.

This commit changes that by allowing full iov_iter structures to be
attached to uios.  Ever since the 4.9 kernel the iov_iter structure
has supported iovecs, kvecs, bvevs, and pipes so it's desirable to
pass the entire thing when possible.  In conjunction with this the
uio helper functions (i.e uiomove(), uiocopy(), etc) have been
updated to understand the new UIO_ITER type.

Note that using the kernel provided uio_iter interfaces allowed the
existing Linux specific uio handling code to be simplified.  When
there's no longer a need to support kernel's older than 4.9, then
it will be possible to remove the iovec and bvec members from the
uio structure and always use a uio_iter.  Until then we need to
maintain all of the existing types for older kernels.

Some additional refactoring and cleanup was included in this change:

- Added checks to configure to detect available iov_iter interfaces.
  Some are available all the way back to the 3.10 kernel and are used
  when available.  In particular, uio_prefaultpages() now always uses
  iov_iter_fault_in_readable() which is available for all supported
  kernels.

- The unused UIO_USERISPACE type has been removed.  It is no longer
  needed now that the uio_seg enum is platform specific.

- Moved zfs_uio.c from the zcommon.ko module to the Linux specific
  platform code for the zfs.ko module.  This gets it out of libzfs
  where it was never needed and keeps this Linux specific code out
  of the common sources.

- Removed unnecessary O_APPEND handling from zfs_iter_write(), this
  is redundant and O_APPEND is already handled in zfs_write();

Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-12-18 08:48:26 -08:00
Ryan Moeller 439dc034e9 FreeBSD: Implement sysctl for fletcher4 impl
There is a tunable to select the fletcher 4 checksum implementation on
Linux but it was not present in FreeBSD.

Implement the sysctl handler for FreeBSD and use ZFS_MODULE_PARAM_CALL
to provide the tunable on both platforms.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-12-11 10:29:01 -08:00
Ryan Moeller e0716250bf
FreeBSD: Do zcommon_init sooner to avoid FPU panic
There has been a panic affecting some system configurations where the
thread FPU context is disturbed during the fletcher 4 benchmarks,
leading to a panic at boot.

module_init() registers zcommon_init to run in the last subsystem
(SI_SUB_LAST).  Running it as soon as interrupts have been configured
(SI_SUB_INT_CONFIG_HOOKS) makes sure we have finished the benchmarks
before we start doing other things.

While it's not clear *how* the FPU context was being disturbed, this
does seem to avoid it.

Add a module_init_early() macro to run zcommon_init() at this earlier
point on FreeBSD.  On Linux this is defined as module_init().

Authored by: Konstantin Belousov <kib@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-12-09 21:29:00 -08:00
Brian Behlendorf 83b698dc42
Reduce fletcher4 and raidz benchmark times
During module load time all of the available fetcher4 and raidz
implementations are benchmarked for a fixed amount of time to
determine the fastest available.  Manual testing has shown that this
time can be significantly reduced with negligible effect on the final
results.

This commit changes the benchmark time to 1ms which can reduce the
module load time by over a second on x86_64.  On an x86_64 system
with sse3, ssse3, and avx2 instructions the benchmark times are:

    Fletcher4    603ms   -> 15ms
    RAIDZ        1,322ms -> 64ms

Reviewed-by: Matthew Macy <mmacy@freebsd.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-12-06 09:57:20 -08:00
Brian Behlendorf 0657326f9c
Update dRAID short feature description
The documentation describes dRAID as a distributed spare, not
parity, RAID implementation.  Update the short feature description
to match the rest of the documentation.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-11-23 14:49:17 -08:00
Brian Behlendorf b2255edcc0
Distributed Spare (dRAID) Feature
This patch adds a new top-level vdev type called dRAID, which stands
for Distributed parity RAID.  This pool configuration allows all dRAID
vdevs to participate when rebuilding to a distributed hot spare device.
This can substantially reduce the total time required to restore full
parity to pool with a failed device.

A dRAID pool can be created using the new top-level `draid` type.
Like `raidz`, the desired redundancy is specified after the type:
`draid[1,2,3]`.  No additional information is required to create the
pool and reasonable default values will be chosen based on the number
of child vdevs in the dRAID vdev.

    zpool create <pool> draid[1,2,3] <vdevs...>

Unlike raidz, additional optional dRAID configuration values can be
provided as part of the draid type as colon separated values. This
allows administrators to fully specify a layout for either performance
or capacity reasons.  The supported options include:

    zpool create <pool> \
        draid[<parity>][:<data>d][:<children>c][:<spares>s] \
        <vdevs...>

    - draid[parity]       - Parity level (default 1)
    - draid[:<data>d]     - Data devices per group (default 8)
    - draid[:<children>c] - Expected number of child vdevs
    - draid[:<spares>s]   - Distributed hot spares (default 0)

Abbreviated example `zpool status` output for a 68 disk dRAID pool
with two distributed spares using special allocation classes.

```
  pool: tank
 state: ONLINE
config:

    NAME                  STATE     READ WRITE CKSUM
    slag7                 ONLINE       0     0     0
      draid2:8d:68c:2s-0  ONLINE       0     0     0
        L0                ONLINE       0     0     0
        L1                ONLINE       0     0     0
        ...
        U25               ONLINE       0     0     0
        U26               ONLINE       0     0     0
        spare-53          ONLINE       0     0     0
          U27             ONLINE       0     0     0
          draid2-0-0      ONLINE       0     0     0
        U28               ONLINE       0     0     0
        U29               ONLINE       0     0     0
        ...
        U42               ONLINE       0     0     0
        U43               ONLINE       0     0     0
    special
      mirror-1            ONLINE       0     0     0
        L5                ONLINE       0     0     0
        U5                ONLINE       0     0     0
      mirror-2            ONLINE       0     0     0
        L6                ONLINE       0     0     0
        U6                ONLINE       0     0     0
    spares
      draid2-0-0          INUSE     currently in use
      draid2-0-1          AVAIL
```

When adding test coverage for the new dRAID vdev type the following
options were added to the ztest command.  These options are leverages
by zloop.sh to test a wide range of dRAID configurations.

    -K draid|raidz|random - kind of RAID to test
    -D <value>            - dRAID data drives per group
    -S <value>            - dRAID distributed hot spares
    -R <value>            - RAID parity (raidz or dRAID)

The zpool_create, zpool_import, redundancy, replacement and fault
test groups have all been updated provide test coverage for the
dRAID feature.

Co-authored-by: Isaac Huang <he.huang@intel.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Co-authored-by: Don Brady <don.brady@delphix.com>
Co-authored-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mmaybee@cray.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-11-13 13:51:51 -08:00
Ryan Moeller 76d04993a6
Update references to nonexistent man pages in code
Refer to the correct section or alternative for FreeBSD and Linux.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-10-30 08:55:59 -07:00
Ryan Moeller 485b50bb9e
Cross-platform acltype
The acltype property is currently hidden on FreeBSD and does not
reflect the NFSv4 style ZFS ACLs used on the platform.  This makes it
difficult to observe that a pool imported from FreeBSD on Linux has a
different type of ACL that is being ignored, and vice versa.

Add an nfsv4 acltype and expose the property on FreeBSD.

Make the default acltype nfsv4 on FreeBSD.

Setting acltype to an unhanded style is treated the same as setting
it to off.  The ACLs will not be removed, but they will be ignored.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-10-13 21:25:48 -07:00
Ryan Moeller 7ead2be3d2
Rename acltype=posixacl to acltype=posix
Prefer acltype=off|posix, retaining the old names as aliases.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-09-16 12:26:06 -07:00
Matthew Macy 2dbad44710
FreeBSD: disable neon usage
The neon support code does not build on FreeBSD,
ifdef out references to fix linker issues on arm64.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes 
2020-08-26 09:54:37 -07:00
Clint Armstrong 1ddd7cdb92
Make formatting of dedup values string consistent
All other prop values return options separated by ` | `,
dedup values do not, they are separated by `, `. This change
makes the dedup value formatting consistent with other properties.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Clint Armstrong <clint@clintarmstrong.net>
Closes 
2020-08-22 10:58:07 -07:00
Michael Niewöhner 10b3c7f5e4 Add zstd support to zfs
This PR adds two new compression types, based on ZStandard:

- zstd: A basic ZStandard compression algorithm Available compression.
  Levels for zstd are zstd-1 through zstd-19, where the compression
  increases with every level, but speed decreases.

- zstd-fast: A faster version of the ZStandard compression algorithm
  zstd-fast is basically a "negative" level of zstd. The compression
  decreases with every level, but speed increases.

  Available compression levels for zstd-fast:
   - zstd-fast-1 through zstd-fast-10
   - zstd-fast-20 through zstd-fast-100 (in increments of 10)
   - zstd-fast-500 and zstd-fast-1000

For more information check the man page.

Implementation details:

Rather than treat each level of zstd as a different algorithm (as was
done historically with gzip), the block pointer `enum zio_compress`
value is simply zstd for all levels, including zstd-fast, since they all
use the same decompression function.

The compress= property (a 64bit unsigned integer) uses the lower 7 bits
to store the compression algorithm (matching the number of bits used in
a block pointer, as the 8th bit was borrowed for embedded block
pointers).  The upper bits are used to store the compression level.

It is necessary to be able to determine what compression level was used
when later reading a block back, so the concept used in LZ4, where the
first 32bits of the on-disk value are the size of the compressed data
(since the allocation is rounded up to the nearest ashift), was
extended, and we store the version of ZSTD and the level as well as the
compressed size. This value is returned when decompressing a block, so
that if the block needs to be recompressed (L2ARC, nop-write, etc), that
the same parameters will be used to result in the matching checksum.

All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`,
`zio_prop_t`, etc.) uses the separated _compress and _complevel
variables.  Only the properties ZAP contains the combined/bit-shifted
value. The combined value is split when the compression_changed_cb()
callback is called, and sets both objset members (os_compress and
os_complevel).

The userspace tools all use the combined/bit-shifted value.

Additional notes:

zdb can now also decode the ZSTD compression header (flag -Z) and
inspect the size, version and compression level saved in that header.
For each record, if it is ZSTD compressed, the parameters of the decoded
compression header get printed.

ZSTD is included with all current tests and new tests are added
as-needed.

Per-dataset feature flags now get activated when the property is set.
If a compression algorithm requires a feature flag, zfs activates the
feature when the property is set, rather than waiting for the first
block to be born.  This is currently only used by zstd but can be
extended as needed.

Portions-Sponsored-By: The FreeBSD Foundation
Co-authored-by: Allan Jude <allanjude@freebsd.org>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes 
Closes 
Closes 
Closes 
2020-08-20 10:30:06 -07:00
Matthew Macy 5e7eaf8fbd
Add define to enable autotrim to default to on
In FreeBSD trim has defaulted to on for several
years. In order to minimize POLA violations on
import it's important to maintain this default
when importing vendored openzfs in to FreeBSD
base.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes 
2020-08-18 09:52:30 -07:00
Matthew Macy e64cc4954c
Refactor ccompile.h to not include system headers
This is a step toward being able to vendor the OpenZFS code in FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes 
2020-07-25 20:09:50 -07:00
Brian Behlendorf 9a49d3f3d3
Add device rebuild feature
The device_rebuild feature enables sequential reconstruction when
resilvering.  Mirror vdevs can be rebuilt in LBA order which may
more quickly restore redundancy depending on the pools average block
size, overall fragmentation and the performance characteristics
of the devices.  However, block checksums cannot be verified
as part of the rebuild thus a scrub is automatically started after
the sequential resilver completes.

The new '-s' option has been added to the `zpool attach` and
`zpool replace` command to request sequential reconstruction
instead of healing reconstruction when resilvering.

    zpool attach -s <pool> <existing vdev> <new vdev>
    zpool replace -s <pool> <old vdev> <new vdev>

The `zpool status` output has been updated to report the progress
of sequential resilvering in the same way as healing resilvering.
The one notable difference is that multiple sequential resilvers
may be in progress as long as they're operating on different
top-level vdevs.

The `zpool wait -t resilver` command was extended to wait on
sequential resilvers.  From this perspective they are no different
than healing resilvers.

Sequential resilvers cannot be supported for RAIDZ, but are
compatible with the dRAID feature being developed.

As part of this change the resilver_restart_* tests were moved
in to the functional/replacement directory.  Additionally, the
replacement tests were renamed and extended to verify both
resilvering and rebuilding.

Original-patch-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: John Poduska <jpoduska@datto.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2020-07-03 11:05:50 -07:00
Arvind Sankar 60356b1a21 Add include files for prototypes
Include the header with prototypes in the file that provides definitions
as well, to catch any mismatch between prototype and definition.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
2020-06-18 12:21:25 -07:00
Arvind Sankar 71504277ae Cleanup linux module kbuild files
The linux module can be built either as an external module, or compiled
into the kernel, using copy-builtin. The source and build directories
are slightly different between the two cases, and currently, compiling
into the kernel still refers to some files from the configured ZFS
source tree, instead of the copies inside the kernel source tree. There
is also duplication between copy-builtin, which creates a Kbuild file to
build ZFS inside the kernel tree, and the top-level module/Makefile.in.

Fix this by moving the list of modules and the CFLAGS settings into a
new module/Kbuild.in, which will be used by the kernel kbuild
infrastructure, and using KBUILD_EXTMOD to distinguish the two cases
within the Makefiles, in order to choose appropriate include
directories etc.

Module CFLAGS setting is simplified by using subdir-ccflags-y (available
since 2.6.30) to set them in the top-level Kbuild instead of each
individual module. The disabling of -Wunused-but-set-variable is removed
from the lua and zfs modules. The variable that the Makefile uses is
actually not defined, so this has no effect; and the warning has long
been disabled by the kernel Makefile itself.

The target_cpu definition in module/{zfs,zcommon} is removed as it was
replaced by use of CONFIG_SPARC64 in
  commit 70835c5b75 ("Unify target_cpu handling")

os/linux/{spl,zfs} are removed from obj-m, as they are not modules in
themselves, but are included by the Makefile in the spl and zfs module
directories. The vestigial Makefiles in os and os/linux are removed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes 
Closes 
2020-06-10 09:24:15 -07:00
Paul B. Henson 7bf3e1fa0f OpenZFS 3254 - add support in zfs for aclmode=restricted
Authored-by: Paul B. Henson <henson@acm.org>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/3254
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/71dbfc287c
Closes 
2020-04-30 11:23:59 -07:00
Paul B. Henson a1af567bb6 OpenZFS 742 - Resurrect the ZFS "aclmode" property OpenZFS 664 - Umask masking "deny" ACL entries OpenZFS 279 - Bug in the new ACL (post-PSARC/2010/029) semantics
Porting notes:
* Updated zfs_acl_chmod to take 'boolean_t isdir' as first parameter
  rather than 'zfsvfs_t *zfsvfs'
* zfs man pages changes mixed between zfs and new zfsprops man pages

Reviewed by: Aram Hvrneanu <aram@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Robert Gordon <rbg@openrbg.com>
Reviewed by: Mark.Maybee@oracle.com
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@nexenta.com>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/742
OpenZFS-issue: https://www.illumos.org/issues/664
OpenZFS-issue: https://www.illumos.org/issues/279
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3c49ce110
Closes 
2020-04-30 11:22:45 -07:00
Fabio Scaccabarozzi c9e3efdb3a
Bugfix/fix uio partial copies
In zfs_write(), the loop continues to the next iteration without
accounting for partial copies occurring in uiomove_iov when 
copy_from_user/__copy_from_user_inatomic return a non-zero status.
This results in "zfs: accessing past end of object..." in the 
kernel log, and the write failing.

Account for partial copies and update uio struct before returning
EFAULT, leave a comment explaining the reason why this is done.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: ilbsmart <wgqimut@gmail.com>
Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com>
Closes  
Closes 
2020-04-01 09:48:54 -07:00
Matthew Ahrens 3f38797338
Compile cityhash code into libzfs
Make the cityhash code compile into libzfs, in preparation for the new
"zstream" command.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes 
2020-03-27 09:11:22 -07:00
Ryan Moeller f5f6fb03b7
Change default to overlay=on
Filesystems allow overlay mounts by default on FreeBSD and Linux.

Respect the native convention by switching the default to overlay=on,
while retaining the option to turn the property off for compatibility
with other operating systems' conventions.

Update documentation and tests accordingly.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2020-03-06 09:28:19 -08:00