This allows users to specify "-o property=value" to override and
"-x property" to exclude properties when receiving a zfs send stream.
Both native and user properties can be specified.
This is useful when using zfs send/receive for periodic
backup/replication because it lets users change properties such as
canmount, mountpoint, or compression without modifying the source.
References:
https://www.illumos.org/issues/2745https://www.illumos.org/issues/3753
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#1350Closes#5349
The send-c_volume test case has been observed to occasionally
fail on 32-bit systems. Until this issue is fully understood
disable this test case.
The rsend_014_pos test case can occasionally fail due to an
EBUSY during export. This can lead to subsequent test failures.
Resolve the issue by retrying the export on EBUSY. Additionally,
remove the gratuitous use of eval.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6088
* zfs_destroy_001_pos - Unable to reproduce the failures locally.
Re-enabled to determine observed buildbot failure rate.
* zfs_destroy_005_neg - Updated for expected Linux behavior.
Busy mount points, even snapshots, are expected to fail.
* zfs_destroy_010_pos - Resolved transient EBUSY with retry.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5635
Issue #5893Closes#6091
This commit allow higher ashift values (up to 16) in 'zpool create'
The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.
Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.
Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.
Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#2024Closes#4205Closes#4740Closes#5763
When vdev_psize increases, the location of labels 2 and 3 changes
because their location is relative to the end of the device.
The configs for labels 2 and 3 are written during the next spa_sync()
because the vdev is added to the dirty config list. However, the
uberblock rings are not re-written in their new location, leaving the
device vulnerable to the beginning of the device being overwritten or
damaged.
This patch copies the uberblock ring from label 0 to labels 2 and 3,
in their new locations, at the next sync after vdev_psize increases.
Also, add a test zpool_expand_004_pos.ksh to confirm the uberblocks
are copied.
Reviewed-by: BearBabyLiu <liu.huang@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5108
* Add zfs_nicebytes() to print human-readable sizes
Some 'zfs', 'zpool' and 'zdb' output strings can be confusing to the
user when no units are specified. This add a new zfs_nicenum_format
"ZFS_NICENUM_BYTES" used to print bytes in their human-readable form.
Additionally, update some test cases to use machine-parsable 'zfs get'.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#2414Closes#3185Closes#3594Closes#6032
OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7628 - create long versions of ZFS send / receive options
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: bunder2015 <omfgbunder@gmail.com>
Ported-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Most of 7252 was already picked up during ABD work. This
commit represents the gap from the final commit to openzfs.
- Fixed split_large_blocks check in do_dump()
- An alternate version of the write_compressible() function was
implemented for Linux which does not depend on fio. The behavior
of fio differs significantly based on the exact version.
- mkholes was replaced with truncate for Linux.
OpenZFS-issue: https://www.illumos.org/issues/7252
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5602294Closes#6067
This patch updates the "zpool status/iostat -c" commands to only run
"pre-baked" scripts from the /etc/zfs/zpool.d directory (or wherever
you install to). The scripts can only be run from -c as an unprivileged
user (unless the ZPOOL_SCRIPTS_AS_ROOT environment var is
set by root). This was done to encourage scripts to be written is such
a way that normal users can use them, and to be cautious. If your
script needs to run a privileged command, consider adding the
appropriate line in /etc/sudoers. See zpool(8) for an example of how
to do this.
The patch also allows the scripts to output custom column names. If
the script outputs a line like:
name=value
then "name" is used for the column name, and "value" is its value.
Multiple columns can be specified by outputting multiple lines. Column
names and values can have spaces. If the value is empty, a dash (-) is
printed instead.
After all the "name=value" lines are read (if any), zpool will take the
next the next line of output (if any) and print it without a column
header. After that, no more lines will be processed. This can be
useful for printing errors.
Lastly, this patch also disables the -c option with the latency and
request size histograms, since it produced awkward output and made the
code harder to maintain.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#5852
The `dd` command as written will not create a hole in the file.
Additionally, the `stride` argument isn't understood by `dd` so
it's replaced with `seek` which isn't equivilant but will result in
a single whole which is sufficient for the test case. Finally,
`conv=notrunc` is added to avoid truncating the file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#6023
Authored by: Richard Yao <ryao@gentoo.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
This was already implemented in ZFS on Linux. This patch
is to resolved the deltas present in our version.
OpenZFS-issue: https://www.illumos.org/issues/6392
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97deCloses#6020
Ensure `zinject -c` all gets called whenever
zpool_scrub_004_pos exits.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Issue #5444Closes#6021
Error example in `zfs_list_007_pos`:
`sudo: dmesg: command not found`
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#6024
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Enable internal log for DEBUG builds and in zfs-tests.sh.
- callbacks/zfs_dbgmsg.ksh - Dump interal log via kstat.
- callbacks/zfs_dmesg.ksh - Dump dmesg log.
- default.cfg - 'Test Suite Specific Commands' dropped.
OpenZFS-issue: https://www.illumos.org/issues/7503
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a1300Closes#6002
musl's sys/errno.h is literally:
/#warning redirecting incorrect #include <sys/errno.h> to <errno.h>
/#include <errno.h>
It does the same for sys/{poll,signal}.h. This is rather noisy when
building ZoL against musl. musl is also correct in pointing out that the
correct headers are outside of sys/ according to the single unix
specification:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/errno.h.htmlhttp://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.h.htmlhttp://pubs.opengroup.org/onlinepubs/7908799/xsh/signal.h.html
Lets implement our own sys/* versions of these headers to redirect to
the proper userland ones when building in userspace. That will silence
the warning.
There are also some instances where we include incorrectly from sys/ or
from outside of sys/ in userspace only code. In these instances, lets
just fix the includes directly.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#5993
Authored by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- zfs_share_001_pos.ksh - Older versions of exportfs will match
multiple exports that share a common prefix. Reorder the 'fs'
list so unshares occur from most to least unique.
- zfs_share_005_pos.ksh - Enabled and updated for Linux.
OpenZFS-issue: https://www.illumos.org/issues/7535
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ac89d1eCloses#5979
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Updated 'zpool labelclear' and 'zdb -l' such that they attempt
to find a vdev given solely its short name. This behavior is
consistent with the upstream OpenZFS code and the test cases
depend on it. The actual implementation differs slightly due
to device naming conventions on Linux.
- auto_online_001_pos, auto_replace_001_pos and add-o_ashift
test cases updated to expect failure when no label exists.
- read_efi_label() and zpool_label_disk_check() are read-only
operations and should use O_RDONLY at open time to enforce this.
- zpool_label_disk() and zpool_relabel_disk() write the partition
information using O_DIRECT an fsync() and page cache invalidation
to ensure a consistent view of the device.
- dump_label() in zdb should invalidate the page cache in order
to get the authoritative label from disk.
OpenZFS-issue: https://www.illumos.org/issues/6865
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95076cCloses#5981
When we try assign a new transaction to a TXG we must know beforehand
if there is sufficient free space on disk. This is to decide,
in dmu_tx_assign(), if we should reject the TX with ENOSPC.
We rely on spa_get_worst_case_asize() to inflate the size of our
logical writes by a factor of spa_asize_inflation which is
calculated as:
(VDEV_RAIDZ_MAXPARITY + 1) * SPA_DVAS_PER_BP * 2 == 24
The problem with the current implementation is that we don't take
into account what happens with very small writes on VDEVs with large
physical block sizes.
Consider the case of writes to a dataset with recordsize=512,
copies=3 on a VDEV with ashift=13 (usually SSD with 8K block size):
every logical IO will end up allocating 3 * 8K = 24K on disk, so 512
bytes multiplied by 48, which is double the size we account for.
If we allow this kind of writes to be assigned a TX it is possible,
when the pool is almost full, to trigger an allocation failure
(ENOSPC) in the ZIO pipeline, which will in turn result in the whole
pool being suspended.
The bug is fixed by using, in spa_get_worst_case_asize(), the MAX()
value chosen between the logical io size from zfs_write() and the
maximum physical block size used among our VDEVs.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5941
Authored by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/2932
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/810e43bCloses#5984Closes#5216
`dircmp` doesn't exist in Linux while `diff` is already used
by zfstests on all platforms.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5996
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5997
Ksh uses `typeset`, `local` is a Bash analog.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5995
Ksh syntax requires a space after `!` in if statement.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5994
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Marcel Telka <marcel@telka.sk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Removed gzip and zle compression restriction on bootfs
datasets. Grub added support for these long ago. Ay
version of grub which understands lz4 also supports this.
- Enabled rootpool tests in runfile but skipped by default
in setup on Linux since they modify the rootpool.
- bootfs_006_pos.ksh, striped pools are allowed as bootfs.
OpenZFS-issue: https://www.illumos.org/issues/7404
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a424cCloses#5982
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Multiple changes in this commit were applied in c1d9abf.
OpenZFS-issue: https://www.illumos.org/issues/7629
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f5fb56dCloses#5980
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
Porting Notes:
- Utilities which aren't available under Linux have been removed.
- Because of sudo's default secure path behavior PATH must be
explicitly reset at the top of libtest.shlib. This avoids the
need for all users to customize secure path on their system.
- Updated ZoL infrastructure to manage constrained path
- Updated all test cases
- Check permissions for usergroup tests
- When testing in-tree create links under bin/
- Update fault cleanup such that missing files during
cleanup aren't fatal.
- Configure su environment with constrained path
OpenZFS-issue: https://www.illumos.org/issues/7290
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1d32ba6Closes#5903
Also included are updates to auto-online test
Automated auto-replace test to go along with ZED FMA integration
(PR 4673) auto-replace_001.pos works using a scsi_debug device
(the only usable virtual device currently due to whole_disk var
needing to be set)
Functionality for automated FMA auto-replace test to work with
scsi_debug devs: Some functionality/exceptions needed to be
added for automation of auto-replace to work correctly.
In the test an alias vdev_id rule is added for any scsi_debug
device which sets the phys_path="scsidebug" after a udevadm
trigger command.
A symlink is created for the vdev_id.conf file (in /etc/zfs/ by
default) to be used in-tree for the test suite
(/var/tmp/zfs/vdev_id.conf). "./scripts/zfs-helpers.sh -i" needs
to be run before fault tests in the ZTS (to use udev rules in-tree)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Closes#5944
Manpage suggests the zpool list properties include 'used'
and 'available', when these are invalid property names.
Use alloc and free in their place.
```
$ zpool list -o name,size,used 2>&1 |head -1
bad property list: invalid property 'used'
$ zpool list -o name,size,avail 2>&1 |head -1
bad property list: invalid property 'avail'
$ zpool list -o name,size,available 2>&1 |head -1
bad property list: invalid property 'available'
$ zpool list -o name,size,alloc,free
NAME SIZE ALLOC FREE
apool 464M 203M 261M
bpool 3.62T 1.97T 1.65T
```
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Matthews <tom@axiom-partners.com>
Closes#5959
`test_options_bookmark` function must have an `s` at the end.
Reviewed-by: Marcel Telka <marcel@telka.sk>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5957
Test cases must be executable or they will be skipped.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5947
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.
Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5878
For zdb -l, detect when the configuration nvlist in some label l (l>0)
is the same as a configuration already dumped. If so, do not dump it.
Make a similar check when dumping Uberblocks for zdb -lu. Check whether
a label already dumped contains an identical Uberblock. If so, do not
dump the Uberblock.
When dumping a configuration or Uberblock, state which labels it is
found in (0-3), for example: labels = 1 2 3
Detecting redundant uberblocks or configurations is accomplished by
calculating checksums of the uberblocks and the packed nvlists
containing the configuration.
If there is nothing unique to be dumped for a label (ie the
configuration and uberblocks have checksums matching those already
dumped) print nothing for that label.
With additional l's or u's, increase verbosity as follows:
-l Dump each unique configuration only once.
Indicate which labels it appears in.
-ll In addition, dump label space usage stats.
-lll Dump every configuration, unique or not.
-u Dump each unique, valid, uberblock only once.
Indicate which labels it appears in.
-uu In addition, state which slots are invalid.
-uuu Dump every uberblock, unique or not.
-uuuu Dump the uberblock blockpointer (used to be -uuu)
Make exit values conform to the manual page. Failing to unpack a
configuration nvlist is considered an error, as well as failing to open
or read from the device.
Add three tests, zdb_00{3,4,5}_pos to verify the above functionality.
An example of the output:
------------------------------------
LABEL 0
------------------------------------
version: 5000
name: 'pool'
state: 1
txg: 880
< ... redacted ... >
features_for_read:
com.delphix:hole_birth
com.delphix:embedded_data
labels = 0
Uberblock[0]
magic = 0000000000bab10c
version = 5000
txg = 0
guid_sum = 3038694082047428541
timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017
labels = 0 1 2 3
Uberblock[4]
magic = 0000000000bab10c
version = 5000
txg = 772
guid_sum = 9045970794941528051
timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017
labels = 0
< ... redacted ... >
------------------------------------
LABEL 1
------------------------------------
version: 5000
name: 'pool'
state: 1
txg: 14
< ... redacted ... >
com.delphix:embedded_data
labels = 1 2 3
Uberblock[4]
magic = 0000000000bab10c
version = 5000
txg = 4
guid_sum = 7793930272573252584
timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017
labels = 1 2 3
< ... redacted ... >
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5738
32-bit builders in the buildbot are having trouble completing
their ENOSPC testing in less than the timeout. Reduce the
zvol size and use a 4k block size to reduce read-modify-writes
which are particularly expensive on 32-bit systems due to the
reduced maximum ARC size.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kash Pande <kash@tripleback.net>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5845
Automated auto-online test to go along with ZED FMA integration (PR 4673)
auto_online_001.pos works with real devices (sd- and mpath) and with non-real
block devices (loop) by adding a scsi_debug device to the pool
Note: In order for test group to run, ZED must not currently be running.
Kernel 3.16.37 or higher needed for scsi_debug to work properly
If timeout occurs on test using a scsi_debug device (error noticed on Ubuntu
system), a reboot might be needed in order for test to pass. (more
investigation into this)
Also suppressed output from is_real_device/is_loop_device/is_mpath_device -
was making the log file very cluttered with useless error messages
"ie /dev/mapper/sdc is not a block device" from previous patch
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Closes#5774
Authored by: Ahmed G <ahmedg@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Stephen Blinick <stephen.blinick@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
- Using $FIO until 7290 is ported.
OpenZFS-issue: https://www.illumos.org/issues/7736
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7a61309Closes#5827
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7337
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b021ac0Closes#5800
Porting notes:
- Additional code refactor for better Zol and OpenZFS codebase sync
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7001
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/258c9c7Closes#5801
Porting notes:
- Most of the changes were previously applied.
7249 rsend_015_pos produces false failures due to race
7250 testrunner can miss options specific to individual tests in runfiles
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7248
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f9a78bfCloses#5799
Authored by: Matthew Ahrens <mahrens@delphix.com>
6405 zvol test setup is non deterministic
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6404
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/24e268fCloses#5792
Porting notes:
- Converted zfs to $ZFS until OpenZFS 7290 is ported.
openzfs/openzfs@1d32ba6
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7260
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/447b1e1Closes#5794
Porting notes:
- The library libdiskmgmt is specific to illumos so these changes
currently have no impact under Linux. This mechanism could be
potentially leveraged in the future.
Use -pH flags in get_pool_prop so that numeric properties such as size
can be compared. The zpool_expand test suite is currently the only one
which uses get_pool_prop for a numeric property.
Add TEMPFILE and TEMPFILE{0,1,2} to default.cfg for tests that must
build pools on top of files, such as this one where expansion is
necessary but the entries in DISKS may not point to entities that can be
expanded.
Base the pool used for testing on file-type VDEVs instead of using zvols
within an underlying pool, to avoid issues that come up when pools are
backed by other pools.
Remove shell variables EX_1GB and EX_2GB used to recognize correct expansion,
and instead calculate the appropriate values based on the variables used to
control file or volume size, org_size and exp_size. This change is also
made in test 001 although that test is not enabled because it depends on
FMA.
Finally, enable zpool_expand_002_pos.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5757
Authored by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6754
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/01ff411Closes#5787
Porting notes:
- Only the ACL test cases used this function and they have been
dropped from ZoL since Linux used POSIX style ACLs.
- functional/acl/nontrivial/zfs_acl_chmod_aclmode_001_pos.ksh
- functional/acl/nontrivial/zfs_acl_chmod_inherit_003_pos.ksh
- functional/acl/nontrivial/zfs_acl_chmod_rwx_002_pos.ksh
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7162
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9ec0cbebCloses#5511Closes#5779
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7496
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5dc1fd7Closes#5781
LOLi
Brian Behlendorf
Olaf Faaland
Dan Kimmel
Tony Hutter
George Melikov
Richard Yao
Giuseppe Di Natale
Yuri Pankov
Giuseppe Di Natale
Toomas Soome
John Wren Kennedy
Sydney Vanda
Tom Matthews
Ahmed G
Prakash Surya
Matthew Ahrens
Hans Rosenfeld
Akash Ayare
Yuri Pankov
Igor Kozhukhov
Marcel Telka