Commit Graph

679 Commits

Author SHA1 Message Date
Tyler J. Stachecki 35a76a0366 Implementation of SSE optimized Fletcher-4
Builds off of 1eeb4562 (Implementation of AVX2 optimized Fletcher-4)
This commit adds another implementation of the Fletcher-4 algorithm.
It is automatically selected at module load if it benchmarks higher
than all other available implementations.

The module benchmark was also amended to analyze the performance of
the byteswap-ed version of Fletcher-4, as well as the non-byteswaped
version. The average performance of the two is used to select the
the fastest implementation available on the host system.

Adds a pair of fields to an existing zcommon module parameter:
-  zfs_fletcher_4_impl (str)
    "sse2"    - new SSE2 implementation if available
    "ssse3"   - new SSSE3 implementation if available

Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4789
2016-07-15 10:42:35 -07:00
Chris Dunlop dfbc86309f Use native inode->i_nlink instead of znode->z_links
A mostly mechanical change, taking into account i_nlink is 32 bits vs ZFS's
64 bit on-disk link count.

We revert "xattr dir doesn't get purged during iput" (ddae16a) as this is a
more Linux-integrated fix for the same issue.

In addition, setting the initial link count on a new node has been changed
from setting one less than required in zfs_mknode() then incrementing to the
correct count in zfs_link_create() (which was somewhat bizarre in the first
place), to setting the correct count in zfs_mknode() and not incrementing it
in zfs_link_create(). This both means we no longer set the link count in
sa_bulk_update() twice (once for the initial incorrect count then again for
the correct count), as well as adhering to the Linux requirement of not
incrementing a zero link count without I_LINKABLE (see linux commit
f4e0c30c).

Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #4838
Issue #227
2016-07-14 16:25:34 -07:00
Gvozden Neskovic ae25d22235 Add RAID-Z routines for SSE2 instruction set, in x86_64 mode.
The patch covers low-end and older x86 CPUs.  Parity generation is
equivalent to SSSE3 implementation, but reconstruction is somewhat
slower.  Previous 'sse' implementation is renamed to 'ssse3' to
indicate highest instruction set used.

Benchmark results:
scalar_rec_p                    4    720476442
scalar_rec_q                    4    187462804
scalar_rec_r                    4    138996096
scalar_rec_pq                   4    140834951
scalar_rec_pr                   4    129332035
scalar_rec_qr                   4    81619194
scalar_rec_pqr                  4    53376668

sse2_rec_p                      4    2427757064
sse2_rec_q                      4    747120861
sse2_rec_r                      4    499871637
sse2_rec_pq                     4    522403710
sse2_rec_pr                     4    464632780
sse2_rec_qr                     4    319124434
sse2_rec_pqr                    4    205794190

ssse3_rec_p                     4    2519939444
ssse3_rec_q                     4    1003019289
ssse3_rec_r                     4    616428767
ssse3_rec_pq                    4    706326396
ssse3_rec_pr                    4    570493618
ssse3_rec_qr                    4    400185250
ssse3_rec_pqr                   4    377541245

original_rec_p                  4    691658568
original_rec_q                  4    195510948
original_rec_r                  4    26075538
original_rec_pq                 4    103087368
original_rec_pr                 4    15767058
original_rec_qr                 4    15513175
original_rec_pqr                4    10746357

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4783
2016-07-13 10:24:55 -07:00
Chunwei Chen 31b6111fd9 Kill zp->z_xattr_parent to prevent pinning
zp->z_xattr_parent will pin the parent. This will cause huge issue
when unlink a file with xattr. Because the unlinked file is pinned, it
will never get purged immediately. And because of that, the xattr
stuff will never be marked as unlinked. So the whole unlinked stuff
will stay there until shrink cache or umount.

This change partially reverts e89260a.  This is safe because only the
zp->z_xattr_parent optimization is removed, zpl_xattr_security_init()
is still called from the zpl outside the inode lock.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #4359
Issue #3508
Issue #4413
Issue #4827
2016-07-12 14:18:10 -07:00
Igor Kozhukhov eca7b76001 OpenZFS 6314 - buffer overflow in dsl_dataset_name
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6314
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d6160ee
2016-06-28 13:47:03 -07:00
Brian Behlendorf 43e52eddb1 Implement zfs_ioc_recv_new() for OpenZFS 2605
Adds ZFS_IOC_RECV_NEW for resumable streams and preserves the legacy
ZFS_IOC_RECV user/kernel interface.  The new interface supports all
stream options but is currently only used for resumable streams.
This way updated user space utilities will interoperate with older
kernel modules.

ZFS_IOC_RECV_NEW is modeled after the existing ZFS_IOC_SEND_NEW
handler.  Non-Linux OpenZFS platforms have opted to change the
legacy interface in an incompatible fashion instead of adding a
new ioctl.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-06-28 13:47:03 -07:00
Andrew Stormont b607405fea OpenZFS 6536 - zfs send: want a way to disable setting of DRR_FLAG_FREERECORDS
Authored by: Andrew Stormont <astormont@racktopsystems.com>
Reviewed by: Anil Vijarnia <avijarnia@racktopsystems.com>
Reviewed by: Kim Shrier <kshrier@racktopsystems.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6536
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/880094b
2016-06-28 13:47:03 -07:00
Paul Dagnelie e6d3a843d6 OpenZFS 6393 - zfs receive a full send as a clone
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6394
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68ecb2e
2016-06-28 13:47:03 -07:00
Brian Behlendorf fd41e93563 OpenZFS 6051 - lzc_receive: allow the caller to read the begin record
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6051
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/620f322
2016-06-28 13:47:02 -07:00
Matthew Ahrens 47dfff3b86 OpenZFS 2605, 6980, 6902
2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12

6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6980
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f

Porting notes:
- All rsend and snapshop tests enabled and updated for Linux.
- Fix misuse of input argument in traverse_visitbp().
- Fix ISO C90 warnings and errors.
- Fix gcc 'missing braces around initializer' in
  'struct send_thread_arg to_arg =' warning.
- Replace 4 argument fletcher_4_native() with 3 argument version,
  this change was made in OpenZFS 4185 which has not been ported.
- Part of the sections for 'zfs receive' and 'zfs send' was
  rewritten and reordered to approximate upstream.
- Fix mktree xattr creation, 'user.' prefix required.
- Minor fixes to newly enabled test cases
- Long holds for volumes allowed during receive for minor registration.
2016-06-28 13:47:02 -07:00
Brian Behlendorf 669cf0ab29 Sync DMU_BACKUP_FEATURE_* flags
Flag 20 was used in OpenZFS as DMU_BACKUP_FEATURE_RESUMING.  The
DMU_BACKUP_FEATURE_LARGE_DNODE flag must be shifted to 21 and
then reserved in the upstream OpenZFS implementation.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #4795
2016-06-24 15:14:27 -07:00
Ned Bass 50c957f702 Implement large_dnode pool feature
Justification
-------------

This feature adds support for variable length dnodes. Our motivation is
to eliminate the overhead associated with using spill blocks.  Spill
blocks are used to store system attribute data (i.e. file metadata) that
does not fit in the dnode's bonus buffer. By allowing a larger bonus
buffer area the use of a spill block can be avoided.  Spill blocks
potentially incur an additional read I/O for every dnode in a dnode
block. As a worst case example, reading 32 dnodes from a 16k dnode block
and all of the spill blocks could issue 33 separate reads. Now suppose
those dnodes have size 1024 and therefore don't need spill blocks.  Then
the worst case number of blocks read is reduced to from 33 to two--one
per dnode block. In practice spill blocks may tend to be co-located on
disk with the dnode blocks so the reduction in I/O would not be this
drastic. In a badly fragmented pool, however, the improvement could be
significant.

ZFS-on-Linux systems that make heavy use of extended attributes would
benefit from this feature. In particular, ZFS-on-Linux supports the
xattr=sa dataset property which allows file extended attribute data
to be stored in the dnode bonus buffer as an alternative to the
traditional directory-based format. Workloads such as SELinux and the
Lustre distributed filesystem often store enough xattr data to force
spill bocks when xattr=sa is in effect. Large dnodes may therefore
provide a performance benefit to such systems.

Other use cases that may benefit from this feature include files with
large ACLs and symbolic links with long target names. Furthermore,
this feature may be desirable on other platforms in case future
applications or features are developed that could make use of a
larger bonus buffer area.

Implementation
--------------

The size of a dnode may be a multiple of 512 bytes up to the size of
a dnode block (currently 16384 bytes). A dn_extra_slots field was
added to the current on-disk dnode_phys_t structure to describe the
size of the physical dnode on disk. The 8 bits for this field were
taken from the zero filled dn_pad2 field. The field represents how
many "extra" dnode_phys_t slots a dnode consumes in its dnode block.
This convention results in a value of 0 for 512 byte dnodes which
preserves on-disk format compatibility with older software.

Similarly, the in-memory dnode_t structure has a new dn_num_slots field
to represent the total number of dnode_phys_t slots consumed on disk.
Thus dn->dn_num_slots is 1 greater than the corresponding
dnp->dn_extra_slots. This difference in convention was adopted
because, unlike on-disk structures, backward compatibility is not a
concern for in-memory objects, so we used a more natural way to
represent size for a dnode_t.

The default size for newly created dnodes is determined by the value of
a new "dnodesize" dataset property. By default the property is set to
"legacy" which is compatible with older software. Setting the property
to "auto" will allow the filesystem to choose the most suitable dnode
size. Currently this just sets the default dnode size to 1k, but future
code improvements could dynamically choose a size based on observed
workload patterns. Dnodes of varying sizes can coexist within the same
dataset and even within the same dnode block. For example, to enable
automatically-sized dnodes, run

 # zfs set dnodesize=auto tank/fish

The user can also specify literal values for the dnodesize property.
These are currently limited to powers of two from 1k to 16k. The
power-of-2 limitation is only for simplicity of the user interface.
Internally the implementation can handle any multiple of 512 up to 16k,
and consumers of the DMU API can specify any legal dnode value.

The size of a new dnode is determined at object allocation time and
stored as a new field in the znode in-memory structure. New DMU
interfaces are added to allow the consumer to specify the dnode size
that a newly allocated object should use. Existing interfaces are
unchanged to avoid having to update every call site and to preserve
compatibility with external consumers such as Lustre. The new
interfaces names are given below. The versions of these functions that
don't take a dnodesize parameter now just call the _dnsize() versions
with a dnodesize of 0, which means use the legacy dnode size.

New DMU interfaces:
  dmu_object_alloc_dnsize()
  dmu_object_claim_dnsize()
  dmu_object_reclaim_dnsize()

New ZAP interfaces:
  zap_create_dnsize()
  zap_create_norm_dnsize()
  zap_create_flags_dnsize()
  zap_create_claim_norm_dnsize()
  zap_create_link_dnsize()

The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The
spa_maxdnodesize() function should be used to determine the maximum
bonus length for a pool.

These are a few noteworthy changes to key functions:

* The prototype for dnode_hold_impl() now takes a "slots" parameter.
  When the DNODE_MUST_BE_FREE flag is set, this parameter is used to
  ensure the hole at the specified object offset is large enough to
  hold the dnode being created. The slots parameter is also used
  to ensure a dnode does not span multiple dnode blocks. In both of
  these cases, if a failure occurs, ENOSPC is returned. Keep in mind,
  these failure cases are only possible when using DNODE_MUST_BE_FREE.

  If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0.
  dnode_hold_impl() will check if the requested dnode is already
  consumed as an extra dnode slot by an large dnode, in which case
  it returns ENOENT.

* The function dmu_object_alloc() advances to the next dnode block
  if dnode_hold_impl() returns an error for a requested object.
  This is because the beginning of the next dnode block is the only
  location it can safely assume to either be a hole or a valid
  starting point for a dnode.

* dnode_next_offset_level() and other functions that iterate
  through dnode blocks may no longer use a simple array indexing
  scheme. These now use the current dnode's dn_num_slots field to
  advance to the next dnode in the block. This is to ensure we
  properly skip the current dnode's bonus area and don't interpret it
  as a valid dnode.

zdb
---
The zdb command was updated to display a dnode's size under the
"dnsize" column when the object is dumped.

For ZIL create log records, zdb will now display the slot count for
the object.

ztest
-----
Ztest chooses a random dnodesize for every newly created object. The
random distribution is more heavily weighted toward small dnodes to
better simulate real-world datasets.

Unused bonus buffer space is filled with non-zero values computed from
the object number, dataset id, offset, and generation number.  This
helps ensure that the dnode traversal code properly skips the interior
regions of large dnodes, and that these interior regions are not
overwritten by data belonging to other dnodes. A new test visits each
object in a dataset. It verifies that the actual dnode size matches what
was stored in the ztest block tag when it was created. It also verifies
that the unused bonus buffer space is filled with the expected data
patterns.

ZFS Test Suite
--------------
Added six new large dnode-specific tests, and integrated the dnodesize
property into existing tests for zfs allow and send/recv.

Send/Receive
------------
ZFS send streams for datasets containing large dnodes cannot be received
on pools that don't support the large_dnode feature. A send stream with
large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be
unrecognized by an incompatible receiving pool so that the zfs receive
will fail gracefully.

While not implemented here, it may be possible to generate a
backward-compatible send stream from a dataset containing large
dnodes. The implementation may be tricky, however, because the send
object record for a large dnode would need to be resized to a 512
byte dnode, possibly kicking in a spill block in the process. This
means we would need to construct a new SA layout and possibly
register it in the SA layout object. The SA layout is normally just
sent as an ordinary object record. But if we are constructing new
layouts while generating the send stream we'd have to build the SA
layout object dynamically and send it at the end of the stream.

For sending and receiving between pools that do support large dnodes,
the drr_object send record type is extended with a new field to store
the dnode slot count. This field was repurposed from unused padding
in the structure.

ZIL Replay
----------
The dnode slot count is stored in the uppermost 8 bits of the lr_foid
field. The bits were unused as the object id is currently capped at
48 bits.

Resizing Dnodes
---------------
It should be possible to resize a dnode when it is dirtied if the
current dnodesize dataset property differs from the dnode's size, but
this functionality is not currently implemented. Clearly a dnode can
only grow if there are sufficient contiguous unused slots in the
dnode block, but it should always be possible to shrink a dnode.
Growing dnodes may be useful to reduce fragmentation in a pool with
many spill blocks in use. Shrinking dnodes may be useful to allow
sending a dataset to a pool that doesn't support the large_dnode
feature.

Feature Reference Counting
--------------------------
The reference count for the large_dnode pool feature tracks the
number of datasets that have ever contained a dnode of size larger
than 512 bytes. The first time a large dnode is created in a dataset
the dataset is converted to an extensible dataset. This is a one-way
operation and the only way to decrement the feature count is to
destroy the dataset, even if the dataset no longer contains any large
dnodes. The complexity of reference counting on a per-dnode basis was
too high, so we chose to track it on a per-dataset basis similarly to
the large_block feature.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3542
2016-06-24 13:13:21 -07:00
Ned Bass 68cbd56e18 Backfill metadnode more intelligently
Only attempt to backfill lower metadnode object numbers if at least
4096 objects have been freed since the last rescan, and at most once
per transaction group. This avoids a pathology in dmu_object_alloc()
that caused O(N^2) behavior for create-heavy workloads and
substantially improves object creation rates.  As summarized by
@mahrens in #4636:

"Normally, the object allocator simply checks to see if the next
object is available. The slow calls happened when dmu_object_alloc()
checks to see if it can backfill lower object numbers. This happens
every time we move on to a new L1 indirect block (i.e. every 32 *
128 = 4096 objects).  When re-checking lower object numbers, we use
the on-disk fill count (blkptr_t:blk_fill) to quickly skip over
indirect blocks that don’t have enough free dnodes (defined as an L2
with at least 393,216 of 524,288 dnodes free). Therefore, we may
find that a block of dnodes has a low (or zero) fill count, and yet
we can’t allocate any of its dnodes, because they've been allocated
in memory but not yet written to disk. In this case we have to hold
each of the dnodes and then notice that it has been allocated in
memory.

The end result is that allocating N objects in the same TXG can
require CPU usage proportional to N^2."

Add a tunable dmu_rescan_dnode_threshold to define the number of
objects that must be freed before a rescan is performed. Don't bother
to export this as a module option because testing doesn't show a
compelling reason to change it. The vast majority of the performance
gain comes from limit the rescan to at most once per TXG.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-06-24 13:13:12 -07:00
Paul Dagnelie bc77ba73fe OpenZFS 6513 - partially filled holes lose birth time
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>a
Ported by: Boris Protopopov <bprotopopov@actifio.com>
Signed-off-by: Boris Protopopov <bprotopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6513
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8df0bcf0

If a ZFS object contains a hole at level one, and then a data block is
created at level 0 underneath that l1 block, l0 holes will be created.
However, these l0 holes do not have the birth time property set; as a
result, incremental sends will not send those holes.

Fix is to modify the dbuf_read code to fill in birth time data.
2016-06-21 10:55:13 -07:00
Gvozden Neskovic ab9f4b0b82 SIMD implementation of vdev_raidz generate and reconstruct routines
This is a new implementation of RAIDZ1/2/3 routines using x86_64
scalar, SSE, and AVX2 instruction sets. Included are 3 parity
generation routines (P, PQ, and PQR) and 7 reconstruction routines,
for all RAIDZ level. On module load, a quick benchmark of supported
routines will select the fastest for each operation and they will
be used at runtime. Original implementation is still present and
can be selected via module parameter.

Patch contains:
- specialized gen/rec routines for all RAIDZ levels,
- new scalar raidz implementation (unrolled),
- two x86_64 SIMD implementations (SSE and AVX2 instructions sets),
- fastest routines selected on module load (benchmark).
- cmd/raidz_test - verify and benchmark all implementations
- added raidz_test to the ZFS Test Suite

New zfs module parameters:
- zfs_vdev_raidz_impl (str): selects the implementation to use. On
  module load, the parameter will only accept first 3 options, and
  the other implementations can be set once module is finished
  loading. Possible values for this option are:
    "fastest" - use the fastest math available
    "original" - use the original raidz code
    "scalar" - new scalar impl
    "sse" - new SSE impl if available
    "avx2" - new AVX2 impl if available

See contents of `/sys/module/zfs/parameters/zfs_vdev_raidz_impl` to
get the list of supported values. If an implementation is not supported
on the system, it will not be shown. Currently selected option is
enclosed in `[]`.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4328
2016-06-21 09:27:26 -07:00
Brian Behlendorf 46ab35954c Remove libzfs_graph.c
The libzfs_graph.c source file should have been removed in 330d06f,
it is entirely unused.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4766
2016-06-16 13:53:15 -07:00
Brian Behlendorf f74b821a66 Add `zfs allow` and `zfs unallow` support
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands.  In addition, non-
privileged users should be able to run all of the following commands:

  * zpool [list | iostat | status | get]
  * zfs [list | get]

Historically this functionality was not available on Linux.  In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability.  Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.

Even with this change some limitations remain.  Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace).  This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code.  It
may be possible to add this functionality in the future.

This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite.  These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.

Two minor bug fixes were required for test-running.py.  First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it.  Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.

Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #362 
Closes #434 
Closes #4100
Closes #4394 
Closes #4410 
Closes #4487
2016-06-07 09:16:52 -07:00
Jinshan Xiong 1eeb4562a7 Implementation of AVX2 optimized Fletcher-4
New functionality:
- Preserves existing scalar implementation.
- Adds AVX2 optimized Fletcher-4 computation.
- Fastest routines selected on module load (benchmark).
- Test case for Fletcher-4 added to ztest.

New zcommon module parameters:
-  zfs_fletcher_4_impl (str): selects the implementation to use.
    "fastest" - use the fastest version available
    "cycle"   - cycle trough all available impl for ztest
    "scalar"  - use the original version
    "avx2"    - new AVX2 implementation if available

Performance comparison (Intel i7 CPU, 1MB data buffers):
- Scalar:  4216 MB/s
- AVX2:   14499 MB/s

See contents of `/sys/module/zcommon/parameters/zfs_fletcher_4_impl`
to get list of supported values. If an implementation is not supported
on the system, it will not be shown. Currently selected option is
enclosed in `[]`.

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4330
2016-06-02 14:30:51 -07:00
Brian Behlendorf 8fbbc6b4cf Linux 4.7 compat: handler->set() takes both dentry and inode
Counterpart to fd4c7b7, the same approach was taken to resolve
the compatibility issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #4717 
Issue #4665
2016-06-01 18:10:06 -07:00
Tony Hutter 26ef0cc7db OpenZFS 6531 - Provide mechanism to artificially limit disk performance
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6531
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130

Porting notes:
- Added new IO delay tracepoints, and moved common ZIO tracepoint macros
  to a new trace_common.h file.
- Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function.
- Updated zinject man page
- Updated zpool_scrub test files
2016-05-26 10:11:51 -07:00
Tony Hutter 7e945072d1 Add request size histograms (-r) to zpool iostat, minor man page fix
Add -r option to "zpool iostat" to print request size histograms for the leaf
ZIOs. This includes histograms of individual ZIOs ("ind") and aggregate ZIOs
("agg"). These stats can be useful for seeing how well the ZFS IO aggregator
is working.

$ zpool iostat -r
mypool        sync_read    sync_write    async_read    async_write      scrub
req_size      ind    agg    ind    agg    ind    agg    ind    agg    ind    agg
----------  -----  -----  -----  -----  -----  -----  -----  -----  -----  -----
512             0      0      0      0      0      0    530      0      0      0
1K              0      0    260      0      0      0    116    246      0      0
2K              0      0      0      0      0      0      0    431      0      0
4K              0      0      0      0      0      0      3    107      0      0
8K             15      0     35      0      0      0      0      6      0      0
16K             0      0      0      0      0      0      0     39      0      0
32K             0      0      0      0      0      0      0      0      0      0
64K            20      0     40      0      0      0      0      0      0      0
128K            0      0     20      0      0      0      0      0      0      0
256K            0      0      0      0      0      0      0      0      0      0
512K            0      0      0      0      0      0      0      0      0      0
1M              0      0      0      0      0      0      0      0      0      0
2M              0      0      0      0      0      0      0      0      0      0
4M              0      0      0      0      0      0    155     19      0      0
8M              0      0      0      0      0      0      0    811      0      0
16M             0      0      0      0      0      0      0     68      0      0
--------------------------------------------------------------------------------

Also rename the stray "-G" in the man page to be "-w" for latency histograms.

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #4659
2016-05-25 15:49:35 -07:00
Chunwei Chen 9baaa7deae Linux 4.7 compat: use iterate_shared for concurrent readdir
Register iterate_shared if it exists so the kernel will used shared
lock and allowing concurrent readdir.

Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE
to allow concurrent seeking.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4664
Closes #4665
2016-05-20 11:09:16 -07:00
Chunwei Chen 68e8f59afb Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4665
2016-05-20 11:08:55 -07:00
Chunwei Chen fd4c7b7a73 Linux 4.7 compat: handler->get() takes both dentry and inode
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4665
2016-05-20 11:08:21 -07:00
Nikolay Borisov 278f223668 Kill znode->z_gen field
This field is a duplicate of the inode->i_generation, so just
kill it.

Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4538
Closes #4654
2016-05-19 13:06:14 -07:00
Brian Behlendorf ada8258141 Revert "zhack: Add 'feature disable' command"
This reverts commit 8302528617 and
ebecfcd699 which broke the build.
While these patches do apply cleanly and passed previous test
runs they need to be updated to account for the changes made in
commit 241b541574.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 11:52:07 -07:00
Brian Behlendorf 8302528617 zhack: Add 'feature disable' command
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 11:00:21 -07:00
Boris Protopopov e3a07cd033 Use zfs range locks in ztest
The zfs range lock interface no longer tightly depends on a
znode_t and therefore can be used in ztest.  This allows the
previous ztest specific implementation to be removed, and for
additional test coverage of the shared version.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4023
Issue #4024
2016-05-17 10:40:30 -07:00
Chunwei Chen d88895a069 Remove dummy znode from zvol_state
struct zvol_state contains a dummy znode, which is around 1KB on x64,
only for zfs_range_lock. But in reality, other than z_range_lock and
z_range_avl, zfs_range_lock only need znode on regular file, which
means we add 1KB on a structure and gain nothing.

In this patch, we remove the dummy znode for zvol_state. In order to
do that, we also need to refactor zfs_range_lock a bit. We move
z_range_lock and z_range_avl pair out of znode_t to form zfs_rlock_t.
This new struct replaces znode_t as the main handle inside the range
lock functions.

We also add pointers to z_size, z_blksz, and z_max_blksz so range lock
code doesn't depend on znode_t.  This allows non-ZPL consumers like
Lustre to use the range locks with their equivalent znode_t structure.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4510
2016-05-17 10:29:02 -07:00
Denys Rtveliashvili 206971d234 OpenZFS 6739 - assumption in cv_timedwait_hires
Userland version of cv_timedwait_hires() always assumes absolute time.

Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Denys Rtveliashvili <denys@rtveliashvili.name>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6739
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/41c6413

Porting Notes:
The ported change has revealed a number of problems in the Linux-specific code,
as it was expecting incorrect return codes from pthread_* functions.
Reviewed and improved the usage of pthread_* function in lib/libzpool/kernel.c.
2016-05-15 15:18:25 -07:00
Chunwei Chen a9bb2b6827 Use cv_timedwait_sig_hires in arc_reclaim_thread
The was originally using interruptible cv_timedwait_sig, but was changed
to uninterruptible cv_timedwait_hires in ae6d0c6. Use _sig_hires instead
to allow interruptible sleep.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4633
Closes #4634
2016-05-12 14:56:47 -07:00
Brian Behlendorf c15706490e Revert "Kill znode->z_gen field"
This reverts commit 4cd77889b6.  The
i_generation field in the inode is 32-bit and the SA code expects
64-bit fixed values.  Revert this optimization for now until
this is cleanly addressed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4538
2016-05-12 13:36:22 -07:00
Tony Hutter 193a37cb24 Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues
Update the zfs module to collect statistics on average latencies, queue sizes,
and keep an internal histogram of all IO latencies.  Along with this, update
"zpool iostat" with some new options to print out the stats:

-l: Include average IO latencies stats:

 total_wait     disk_wait    syncq_wait    asyncq_wait  scrub
 read  write   read  write   read  write   read  write   wait
-----  -----  -----  -----  -----  -----  -----  -----  -----
    -   41ms      -    2ms      -   46ms      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -      -      -      -      -      -      -      -      -
    -   49ms      -    2ms      -   47ms      -      -      -
    -      -      -      -      -      -      -      -      -
    -    2ms      -    1ms      -      -      -    1ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  2ms    1ms    2ms  412us   26us   25us      -    5ms      -
    -    1ms      -  413us      -   25us      -    5ms      -
    -    1ms      -  460us      -   29us      -    5ms      -
196us    1ms  196us  370us    7us   23us      -    5ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----

-w: Print out latency histograms:

sdb           total           disk         sync_queue      async_queue
latency    read   write    read   write    read   write    read   write   scrub
-------  ------  ------  ------  ------  ------  ------  ------  ------  ------
1ns           0       0       0       0       0       0       0       0       0
...
33us          0       0       0       0       0       0       0       0       0
66us          0       0     107    2486       2     788      12      12       0
131us         2     797     359    4499      10     558     184     184       6
262us        22     801     264    1563      10     286     287     287      24
524us        87     575      71   52086      15    1063     136     136      92
1ms         152    1190       5   41292       4    1693     252     252     141
2ms         245    2018       0   50007       0    2322     371     371     220
4ms         189    7455      22  162957       0    3912    6726    6726     199
8ms         108    9461       0  102320       0    5775    2526    2526      86
17ms         23   11287       0   37142       0    8043    1813    1813      19
34ms          0   14725       0   24015       0   11732    3071    3071       0
67ms          0   23597       0    7914       0   18113    5025    5025       0
134ms         0   33798       0     254       0   25755    7326    7326       0
268ms         0   51780       0      12       0   41593   10002   10002       0
537ms         0   77808       0       0       0   64255   13120   13120       0
1s            0  105281       0       0       0   83805   20841   20841       0
2s            0   88248       0       0       0   73772   14006   14006       0
4s            0   47266       0       0       0   29783   17176   17176       0
9s            0   10460       0       0       0    4130    6295    6295       0
17s           0       0       0       0       0       0       0       0       0
34s           0       0       0       0       0       0       0       0       0
69s           0       0       0       0       0       0       0       0       0
137s          0       0       0       0       0       0       0       0       0
-------------------------------------------------------------------------------

-h: Help

-H: Scripted mode. Do not display headers, and separate fields by a single
    tab instead of arbitrary space.

-q: Include current number of entries in sync & async read/write queues,
    and scrub queue:

 syncq_read    syncq_write   asyncq_read  asyncq_write   scrubq_read
 pend  activ   pend  activ   pend  activ   pend  activ   pend  activ
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0    227    394      0     19      0      0      0      0
    0      0    227    394      0     19      0      0      0      0
    0      0    108     98      0     19      0      0      0      0
    0      0     19     98      0      0      0      0      0      0
    0      0     78     98      0      0      0      0      0      0
    0      0     19     88      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----

-p: Display numbers in parseable (exact) values.

Also, update iostat syntax to allow the user to specify specific vdevs
to show statistics for.  The three options for choosing pools/vdevs are:

Display a list of pools:
    zpool iostat ... [pool ...]

Display a list of vdevs from a specific pool:
    zpool iostat ... [pool vdev ...]

Display a list of vdevs from any pools:
    zpool iostat ... [vdev ...]

Lastly, allow zpool command "interval" value to be floating point:
    zpool iostat -v 0.5

Signed-off-by: Tony Hutter <hutter2@llnl.gov
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4433
2016-05-12 12:36:32 -07:00
Adam Stevko 2a8b84b747 OpenZFS 3993, 4700
3993 zpool(1M) and zfs(1M) should support -p for "list" and "get"
4700 "zpool get" doesn't support -H or -o options

Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/3993
OpenZFS-issue: https://www.illumos.org/issues/4700
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c58b352

Porting notes:
I removed ZoL's zpool_get_prop_literal() in favor of
zpool_get_prop(..., boolean_t literal) since that's what OpenZFS
uses.  The functionality is the same.
2016-05-11 11:49:37 -07:00
Tony Hutter f7c63cda90 OpenZFS 6544 - incorrect comment in libzfs.h about offline status
6544 incorrect comment in libzfs.h about offline status
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6544
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cb605c4
Closes #4595
2016-05-05 09:30:05 -07:00
Joe Stein e0ab3ab553 OpenZFS 6736 - ZFS per-vdev ZAPs
6736 ZFS per-vdev ZAPs
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/6736
  https://github.com/openzfs/openzfs/commit/215198a

Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4515
2016-05-02 14:27:45 -07:00
Nikolay Borisov 4cd77889b6 Kill znode->z_gen field
This field is a duplicate of the inode->i_generation, so just kill it

Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4538
2016-05-02 11:22:31 -07:00
Brian Behlendorf 874bd959f4 Fix user namespaces uid/gid mapping
As described in torvalds/linux@5f3a4a2 the &init_user_ns, and
not the current user_ns, should be passed to posix_acl_from_xattr()
and posix_acl_to_xattr().  Conveniently the init_user_ns is
available through the init credential (kcred).


Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Closes #4177
2016-04-30 12:21:51 -07:00
Alex Reece 463a8cfe2b Illumos 6844 - dnode_next_offset can detect fictional holes
6844 dnode_next_offset can detect fictional holes
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>

dnode_next_offset is used in a variety of places to iterate over the
holes or allocated blocks in a dnode. It operates under the premise that
it can iterate over the blockpointers of a dnode in open context while
holding only the dn_struct_rwlock as reader. Unfortunately, this premise
does not hold.

When we create the zio for a dbuf, we pass in the actual block pointer
in the indirect block above that dbuf. When we later zero the bp in
zio_write_compress, we are directly modifying the bp. The state of the
bp is now inconsistent from the perspective of dnode_next_offset: the bp
will appear to be a hole until zio_dva_allocate finally finishes filling
it in. In the meantime, dnode_next_offset can detect a hole in the dnode
when none exists.

I was able to experimentally demonstrate this behavior with the
following setup:
1. Create a file with 1 million dbufs.
2. Create a thread that randomly dirties L2 blocks by writing to the
first L0 block under them.
3. Observe dnode_next_offset, waiting for it to skip over a hole in the
middle of a file.
4. Do dnode_next_offset in a loop until we skip over such a non-existent
hole.

The fix is to ensure that it is valid to iterate over the indirect
blocks in a dnode while holding the dn_struct_rwlock by passing the zio
a copy of the BP and updating the actual BP in dbuf_write_ready while
holding the lock.

References:
  https://www.illumos.org/issues/6844
  https://github.com/openzfs/openzfs/pull/82
  DLPX-35372

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4548
2016-04-27 16:24:15 -07:00
Brian Behlendorf da5e151f20 Add pn_alloc()/pn_free() functions
In order to remove the HAVE_PN_UTILS wrappers the pn_alloc() and
pn_free() functions must be implemented.  The existing illumos
implementation were used for this purpose.

The `flags` argument which was used in places wrapped by the
HAVE_PN_UTILS condition has beed added back to zfs_remove() and
zfs_link() functions.  This removes a small point of divergence
between the ZoL code and upstream.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4522
2016-04-21 09:49:25 -07:00
Chunwei Chen 6760077194 Make zfs mount according to relatime config in dataset
Also enable lazytime in mount.zfs

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
2016-04-05 18:55:59 -07:00
Chunwei Chen 0df9673f01 Fix atime handling and relatime
The problem for atime:

We have 3 places for atime: inode->i_atime, znode->z_atime and SA. And its
handling is a mess. A huge part of mess regarding atime comes from
zfs_tstamp_update_setup, zfs_inode_update, and zfs_getattr, which behave
inconsistently with those three values.

zfs_tstamp_update_setup clears z_atime_dirty unconditionally as long as you
don't pass ATTR_ATIME. Which means every write(2) operation which only updates
ctime and mtime will cause atime changes to not be written to disk.

Also zfs_inode_update from write(2) will replace inode->i_atime with what's
inside SA(stale). But doesn't touch z_atime. So after read(2) and write(2).
You'll have i_atime(stale), z_atime(new), SA(stale) and z_atime_dirty=0.

Now, if you do stat(2), zfs_getattr will actually replace i_atime with what's
inside, z_atime. So you will have now you'll have i_atime(new), z_atime(new),
SA(stale) and z_atime_dirty=0. These will all gone after umount. And you'll
leave with a stale atime.

The problem for relatime:

We do have a relatime config inside ZFS dataset, but how it should interact
with the mount flag MS_RELATIME is not well defined. It seems it wanted
relatime mount option to override the dataset config by showing it as
temporary in `zfs get`. But at the same time, `zfs set relatime=on|off` would
also seems to want to override the mount option. Not to mention that
MS_RELATIME flag is actually never passed into ZFS, so it never really worked.

How Linux handles atime:

The Linux kernel actually handles atime completely in VFS, except for writing
it to disk. So if we remove the atime handling in ZFS, things would just work,
no matter it's strictatime, relatime, noatime, or even O_NOATIME. And whenever
VFS updates the i_atime, it will notify the underlying filesystem via
sb->dirty_inode().

And also there's one thing to note about atime flags like MS_RELATIME and
other flags like MS_NODEV, etc. They are mount point flags rather than
filesystem(sb) flags. Since native linux filesystem can be mounted at multiple
places at the same time, they can all have different atime settings. So these
flags are never passed down to filesystem drivers.

What this patch tries to do:

We remove znode->z_atime, since we won't gain anything from it. We remove most
of the atime handling and leave it to VFS. The only thing we do with atime is
to write it when dirty_inode() or setattr() is called. We also add
file_accessed() in zpl_read() since it's not provided in vfs_read().

After this patch, only the MS_RELATIME flag will have effect. The setting in
dataset won't do anything. We will make zfstuil to mount ZFS with MS_RELATIME
set according to the setting in dataset in future patch.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
2016-04-05 18:54:55 -07:00
Don Brady 39fc0cb557 Add support for devid and phys_path keys in vdev disk labels
This is foundational work for ZED.

Updates a leaf vdev's persistent device strings on Linux platform

* only applies for a dedicated leaf vdev (aka whole disk)
* updated during pool create|add|attach|import
* used for matching device matching during auto-{online,expand,replace}
* stored in a leaf disk config label (i.e. alongside 'path' NVP)
* can opt-out using env var ZFS_VDEV_DEVID_OPT_OUT=YES

Some examples:

    path: '/dev/sdb1'
    devid: 'scsi-350000394a8ca4fbc-part1'
    phys_path: 'pci-0000:04:00.0-sas-0x50000394a8ca4fbf-lun-0'

    path: '/dev/mapper/mpatha'
    devid: 'dm-uuid-mpath-35000c5006304de3f'

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2856
Closes #3978
Closes #4416
2016-03-31 13:45:53 -07:00
Brian Behlendorf 726c4a2565 Remove complicated libspl assert wrappers
Effectively provide our own version of assert()/verify() for use
in user space.  This minimizes our dependencies and aligns the
user space assertion handling with what's used in the kernel.

Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4449
2016-03-30 12:26:42 -07:00
Carlo Landmeter 1a01c207cb Ensure correct return value type
When compiling with musl libc the return type will be incorrect.

Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4454
2016-03-29 18:33:17 -07:00
Gvozden Neskovic fc0c72b167 Support for vectorized algorithms on x86
This is initial support for x86 vectorized implementations of ZFS parity
and checksum algorithms.

For the compilation phase, configure step checks if toolchain supports relevant
instruction sets. Each implementation must ensure that the code is not passed
to compiler if relevant instruction set is not supported. For this purpose,
following new defines are provided if instruction set is supported:
	- HAVE_SSE,
	- HAVE_SSE2,
	- HAVE_SSE3,
	- HAVE_SSSE3,
	- HAVE_SSE4_1,
	- HAVE_SSE4_2,
	- HAVE_AVX,
	- HAVE_AVX2.

For detecting if an instruction set can be used in runtime, following functions
are provided in (include/linux/simd_x86.h):
	- zfs_sse_available()
	- zfs_sse2_available()
	- zfs_sse3_available()
	- zfs_ssse3_available()
	- zfs_sse4_1_available()
	- zfs_sse4_2_available()
	- zfs_avx_available()
	- zfs_avx2_available()
	- zfs_bmi1_available()
	- zfs_bmi2_available()

These function should be called once, on module load, or initialization.
They are safe to use from user and kernel space.
If an implementation is using more than single instruction set, both compiler
and runtime support for all relevant instruction sets should be checked.

Kernel fpu methods:
	- kfpu_begin()
	- kfpu_end()

Use __get_cpuid_max and __cpuid_count from <cpuid.h>
Both gcc and clang have support for these. They also handle ebx register
in case it is used for PIC code.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes #4381
2016-03-21 09:24:34 -07:00
Brian Behlendorf 6bb24f4dc7 Add the ZFS Test Suite
Add the ZFS Test Suite and test-runner framework from illumos.
This is a continuation of the work done by Turbo Fredriksson to
port the ZFS Test Suite to Linux.  While this work was originally
conceived as a stand alone project integrating it directly with
the ZoL source tree has several advantages:

  * Allows the ZFS Test Suite to be packaged in zfs-test package.
    * Facilitates easy integration with the CI testing.
    * Users can locally run the ZFS Test Suite to validate ZFS.
      This testing should ONLY be done on a dedicated test system
      because the ZFS Test Suite in its current form is destructive.
  * Allows the ZFS Test Suite to be run directly in the ZoL source
    tree enabled developers to iterate quickly during development.
  * Developers can easily add/modify tests in the framework as
    features are added or functionality is changed.  The tests
    will then always be in sync with the implementation.

Full documentation for how to run the ZFS Test Suite is available
in the tests/README.md file.

Warning: This test suite is designed to be run on a dedicated test
system.  It will make modifications to the system including, but
not limited to, the following.

  * Adding new users
  * Adding new groups
  * Modifying the following /proc files:
    * /proc/sys/kernel/core_pattern
    * /proc/sys/kernel/core_uses_pid
  * Creating directories under /

Notes:
  * Not all of the test cases are expected to pass and by default
    these test cases are disabled.  The failures are primarily due
    to assumption made for illumos which are invalid under Linux.
  * When updating these test cases it should be done in as generic
    a way as possible so the patch can be submitted back upstream.
    Most existing library functions have been updated to be Linux
    aware, and the following functions and variables have been added.
    * Functions:
      * is_linux          - Used to wrap a Linux specific section.
      * block_device_wait - Waits for block devices to be added to /dev/.
    * Variables:            Linux          Illumos
      * ZVOL_DEVDIR         "/dev/zvol"    "/dev/zvol/dsk"
      * ZVOL_RDEVDIR        "/dev/zvol"    "/dev/zvol/rdsk"
      * DEV_DSKDIR          "/dev"         "/dev/dsk"
      * DEV_RDSKDIR         "/dev"         "/dev/rdsk"
      * NEWFS_DEFAULT_FS    "ext2"         "ufs"
  * Many of the disabled test cases fail because 'zfs/zpool destroy'
    returns EBUSY.  This is largely causes by the asynchronous nature
    of device handling on Linux and is expected, the impacted test
    cases will need to be updated to handle this.
  * There are several test cases which have been disabled because
    they can trigger a deadlock.  A primary example of this is to
    recursively create zpools within zpools.  These tests have been
    disabled until the root issue can be addressed.
  * Illumos specific utilities such as (mkfile) should be added to
    the tests/zfs-tests/cmd/ directory.  Custom programs required by
    the test scripts can also be added here.
  * SELinux should be either is permissive mode or disabled when
    running the tests.  The test cases should be updated to conform
    to a standard policy.
  * Redundant test functionality has been removed (zfault.sh).
  * Existing test scripts (zconfig.sh) should be migrated to use
    the framework for consistency and ease of testing.
  * The DISKS environment variable currently only supports loopback
    devices because of how the ZFS Test Suite expects partitions to
    be named (p1, p2, etc).  Support must be added to generate the
    correct partition name based on the device location and name.
  * The ZFS Test Suite is part of the illumos code base at:
    https://github.com/illumos/illumos-gate/tree/master/usr/src/test

Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6
Closes #1534
2016-03-16 13:46:16 -07:00
Boris Protopopov a0bd735adb Add support for asynchronous zvol minor operations
zfsonlinux issue #2217 - zvol minor operations: check snapdev
property before traversing snapshots of a dataset

zfsonlinux issue #3681 - lock order inversion between zvol_open()
and dsl_pool_sync()...zvol_rename_minors()

Create a per-pool zvol taskq for asynchronous zvol tasks.
There are a few key design decisions to be aware of.

* Each taskq must be single threaded to ensure tasks are always
  processed in the order in which they were dispatched.

* There is a taskq per-pool in order to keep the pools independent.
  This way if one pool is suspended it will not impact another.

* The preferred location to dispatch a zvol minor task is a sync
  task.  In this context there is easy access to the spa_t and
  minimal error handling is required because the sync task must
  succeed.

Support for asynchronous zvol minor operations address issue #3681.

Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2217
Closes #3678
Closes #3681
2016-03-10 09:49:22 -08:00
Thijs Cramer 95003f7098 Updated paths to scan when importing zpool(s)
Added by-partlabel and by-partuuid to the default device search
path.  Made made device names in by-label more preferable.

Signed-off-by: Thijs Cramer <thijs.cramer@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3892
2016-03-09 10:41:23 -08:00
Brian Behlendorf 7d11e37e55 Require libblkid
Historically libblkid support was detected as part of configure
and optionally enabled.  This was done because at the time support
for detecting ZFS pool vdevs had just be added to libblkid and
those updated packages were not yet part of many distributions.
This is no longer the case and any reasonably current distribution
will ship a version of libblkid which can detect ZFS pool vdevs.

This patch makes libblkid mandatory at build time and libblkid
the preferred method of scanning for ZFS pools.  For distributions
which include a modern version of libblkid there is no change in
behavior.  Explicitly scanning the default search paths is still
supported and can be enabled with the '-s' command line option.

Additionally making libblkid mandatory means that the 'zpool create'
command can reliably detect if a specified device has an existing
non-ZFS filesystem (ext4, xfs) and print a warning.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2448
2016-03-09 10:39:22 -08:00
smh 9f500936c8 FreeBSD r256956: Improve ZFS N-way mirror read performance by using load and locality information.
The existing algorithm selects a preferred leaf vdev based on offset of the zio
request modulo the number of members in the mirror. It assumes the devices are
of equal performance and that spreading the requests randomly over both drives
will be sufficient to saturate them. In practice this results in the leaf vdevs
being under utilized.

The new algorithm takes into the following additional factors:
* Load of the vdevs (number outstanding I/O requests)
* The locality of last queued I/O vs the new I/O request.

Within the locality calculation additional knowledge about the underlying vdev
is considered such as; is the device backing the vdev a rotating media device.

This results in performance increases across the board as well as significant
increases for predominantly streaming loads and for configurations which don't
have evenly performing devices.

The following are results from a setup with 3 Way Mirror with 2 x HD's and
1 x SSD from a basic test running multiple parrallel dd's.

With pre-fetch disabled (vfs.zfs.prefetch_disable=1):

== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s

With pre-fetch enabled (vfs.zfs.prefetch_disable=0):

== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s

In addition to the performance changes the code was also restructured, with
the help of Justin Gibbs, to provide a more logical flow which also ensures
vdevs loads are only calculated from the set of valid candidates.

The following additional sysctls where added to allow the administrator
to tune the behaviour of the load algorithm:
* vfs.zfs.vdev.mirror.rotating_inc
* vfs.zfs.vdev.mirror.rotating_seek_inc
* vfs.zfs.vdev.mirror.rotating_seek_offset
* vfs.zfs.vdev.mirror.non_rotating_inc
* vfs.zfs.vdev.mirror.non_rotating_seek_inc

These changes where based on work started by the zfsonlinux developers:
https://github.com/zfsonlinux/zfs/pull/1487

Reviewed by:	gibbs, mav, will
MFC after:	2 weeks
Sponsored by:	Multiplay

References:
  https://github.com/freebsd/freebsd@5c7a6f5d
  https://github.com/freebsd/freebsd@31b7f68d
  https://github.com/freebsd/freebsd@e186f564

Performance Testing:
  https://github.com/zfsonlinux/zfs/pull/4334#issuecomment-189057141

Porting notes:
- The tunables were adjusted to have ZoL-style names.
- The code was modified to use ZoL's vd_nonrot.
- Fixes were done to make cstyle.pl happy
- Merge conflicts were handled manually
- freebsd/freebsd@e186f564bc by my
  collegue Andriy Gapon has been included. It applied perfectly, but
  added a cstyle regression.
- This replaces 556011dbec entirely.
- A typo "IO'a" has been corrected to say "IO's"
- Descriptions of new tunables were added to man/man5/zfs-module-parameters.5.

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4334
2016-02-26 11:24:35 -08:00
Richard Yao d2f3e292dc Add -gLp to zpool subcommands for alt vdev names
The following options have been added to the zpool add, iostat,
list, status, and split subcommands.  The default behavior was
not modified, from zfs(8).

  -g    Display vdev GUIDs  instead  of  the  normal  short
        device  names.  These GUIDs can be used in-place of
        device   names   for    the    zpool    detach/off‐
        line/remove/replace commands.

  -L    Display real paths for vdevs resolving all symbolic
        links. This can be used to lookup the current block
        device  name regardless of the /dev/disk/ path used
        to open it.

  -p    Display  full  paths  for vdevs instead of only the
        last component of the path.  This can  be  used  in
        conjunction with the -L flag.

This behavior may also be enabled using the following environment
variables.

  ZPOOL_VDEV_NAME_GUID
  ZPOOL_VDEV_NAME_FOLLOW_LINKS
  ZPOOL_VDEV_NAME_PATH

This change is based on worked originally started by Richard Yao
to add a -g option.  Then extended by @ilovezfs to add a -L option
for openzfsonosx.  Those changes have been merged, re-factored,
a -p option added and extended to all relevant zpool subcommands.

Original-patch-by: Richard Yao <ryao@gentoo.org>
Extended-by: ilovezfs <ilovezfs@icloud.com>
Extended-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2011
Closes #4341
2016-02-25 11:58:39 -08:00
Brian Behlendorf b6fcb792ca Illumos 6414 - vdev_config_sync could be simpler
6414 vdev_config_sync could be simpler
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/6414
  https://github.com/illumos/illumos-gate/commit/eb5bb58

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
2016-01-28 12:44:39 -05:00
Brian Behlendorf 519129ff4e Illumos 6815179, 6844191
6815179 zpool import with a large number of LUNs is too slow
6844191 zpool import, scanning of disks should be multi-threaded

References:
  https://github.com/illumos/illumos-gate/commit/4f67d75

Porting notes:
- This change was originally never ported to Linux due to it
  dependence on the thread pool interface.  This patch solves
  that issue by switching the code to use the existing taskq
  implementation which provides the same basic functionality.
  However, in order for this to work properly thread_init()
  and thread_fini() must be called around to taskq consumer
  to perform the needed thread initialization.

- The check_one_slice, nozpool_all_slices, and check_slices
  functions have been disabled for Linux.  They are difficult,
  but possible, to implement for Linux due to how partitions
  are get names.  Since this is only an optimization this code
  can be added at a latter date.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-22 09:39:46 -08:00
Matthew Ahrens 19d55079ae Illumos 4950 - files sometimes can't be removed from a full filesystem
4950 files sometimes can't be removed from a full filesystem
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4950
  https://github.com/illumos/illumos-gate/commit/4bb7380

Porting notes:
- ZoL currently does not log discards to zvols, so the portion of
  this patch that modifies the discard logging to mark it as
  freeing space has been discarded.

2. may_delete_now had been removed from zfs_remove() in ZoL.
   It has been reintroduced.

3. We do not try to emulate vnodes, so the following lines are
   not valid on Linux:

	mutex_enter(&vp->v_lock);
	may_delete_now = vp->v_count == 1 && !vn_has_cached_data(vp);
	mutex_exit(&vp->v_lock);

  This has been replaced with:

	mutex_enter(&zp->z_lock);
	may_delete_now = atomic_read(&ip->i_count) == 1 && !(zp->z_is_mapped);
	mutex_exit(&zp->z_lock);

Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-21 16:59:30 -08:00
Brian Behlendorf 4967a3eb9d Linux 4.5 compat: xattr list handler
The registered xattr .list handler was simplified in the 4.5 kernel
to only perform a permission check.  Given a dentry for the file it
must return a boolean indicating if the name is visible.  This
differs slightly from the previous APIs which also required the
function to copy the name in to the provided list and return its
size.  That is now all the responsibility of the caller.

This should be straight forward change to make to ZoL since we've
always required the caller to make the copy.  However, this was
slightly complicated by the need to support 3 older APIs.  Yes,
between 2.6.32 and 4.5 there are 4 versions of this interface!

Therefore, while the functional change in this patch is small it
includes significant cleanup to make the code understandable and
maintainable.  These changes include:

- Improved configure checks for .list, .get, and .set interfaces.
  - Interfaces checked from newest to oldest.
  - Strict checking for each possible known interface.
  - Configure fails when no known interface is available.
  - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency
    with similar iops and fops configure checks.

- POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to
  move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}.
  Compatibility wrapper were added for old kernels.

- ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing
  ZPL_XATTR_{GET|SET} WRAPPERs.  Only the inode is guaranteed to be
  a valid pointer, passing NULL for the 'list' and 'name' variables
  is allowed and must be checked for.  All .list functions were
  updated to use the wrapper to aid readability.

- zpl_xattr_filldir() updated to use the .list function for its
  permission check which is consistent with the updated Linux 4.5
  interface.  If a .list function is registered it should return 0
  to indicate a name should be skipped, if there is no registered
  function the name will be added.

- Additional documentation from xattr(7) describing the correct
  behavior for each namespace was added before the relevant handlers.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
2016-01-20 11:36:56 -08:00
Josef 'Jeff' Sipek bc89ac8479 Illumos 5045 - use atomic_{inc,dec}_* instead of atomic_add_*
5045 use atomic_{inc,dec}_* instead of atomic_add_*
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5045
  https://github.com/illumos/illumos-gate/commit/1a5e258

Porting notes:
- All changes to non-ZFS files dropped.
- Changes to zfs_vfsops.c dropped because they were Illumos specific.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4220
2016-01-15 15:38:36 -08:00
Joe Stein 82f6f6e654 Illumos 6298 - zfs_create_008_neg and zpool_create_023_neg
6298 zfs_create_008_neg and zpool_create_023_neg need to be updated
for large block support
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/6298
  https://github.com/illumos/illumos-gate/commit/e9316f7

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4217
2016-01-15 15:38:35 -08:00
Richard Yao 546f38433a SET_ERROR should print strings
When debugging with tracepoints, we see string pointers:

zfs  3017 [006]  8878.728915: zfs:zfs_set__error: ffffffffa0eec3fc:3013:ffffffffa0ebcd60(): error 0x2
        ffffffffa0e1ca43 spa_open_common (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffffa0e1cbe3 spa_open (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffffa0e6f6ef zfs_ioc_stable (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffffa0e6f2a9 zfsdev_ioctl (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffff811909dd do_vfs_ioctl ([kernel.kallsyms])
        ffffffff81190c41 sys_ioctl ([kernel.kallsyms])
        ffffffff8156e2e9 system_call_fastpath ([kernel.kallsyms])
            7ff7d8be69c7 __GI___ioctl (/lib64/libc-2.19.so)
            7ff7d90cac53 lzc_ioctl.constprop.3 (/lib64/libzfs_core.so.1.0.0)
        636f695f637a6c00 [unknown] ([unknown])

Printing the actual strings is more convenient:

zfs  3461 [001] 10599.847692: zfs:zfs_set__error: spa.c:3013:spa_open_common(): error 0x2
        ffffffffa116ba43 spa_open_common (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffffa116bbe3 spa_open (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffffa11be8df zfs_ioc_stable (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffffa11be499 zfsdev_ioctl (/lib/modules/3.12.21-gentoo-r1/extra/zfs/zfs.ko)
        ffffffff811909dd do_vfs_ioctl ([kernel.kallsyms])
        ffffffff81190c41 sys_ioctl ([kernel.kallsyms])
        ffffffff8156e2e9 system_call_fastpath ([kernel.kallsyms])
            7f11b843c9c7 __GI___ioctl (/lib64/libc-2.19.so)
            7f11b8920c53 lzc_ioctl.constprop.3 (/lib64/libzfs_core.so.1.0.0)
        636f695f637a6c00 [unknown] ([unknown])

A few other tracepoints have strings as well, so switch to printing
the actual string values at the same time.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4212
2016-01-15 15:38:35 -08:00
Richard Yao b10695c8f1 Remove fastwrite mutex
The fast write mutex is intended to protect accounting, but it is
redundant because all accounting is performed through atomic operations.
It also serializes all metaslab IO behind a mutex, which introduces a
theoretical scaling regression that the Illumos developers did not like
when we showed this to them. Removing it makes the selection of the
metaslab_group lock free as it is on Illumos. The selection is not quite
the same without the lock because the loop races with IO completions,
but any imbalances caused by this are likely to be corrected by
subsequent metaslab group selections.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3643
2016-01-15 15:38:35 -08:00
Brian Behlendorf c96c36fa22 Fix zsb->z_hold_mtx deadlock
The zfs_znode_hold_enter() / zfs_znode_hold_exit() functions are used to
serialize access to a znode and its SA buffer while the object is being
created or destroyed.  This kind of locking would normally reside in the
znode itself but in this case that's impossible because the znode and SA
buffer may not yet exist.  Therefore the locking is handled externally
with an array of mutexs and AVLs trees which contain per-object locks.

In zfs_znode_hold_enter() a per-object lock is created as needed, inserted
in to the correct AVL tree and finally the per-object lock is held.  In
zfs_znode_hold_exit() the process is reversed.  The per-object lock is
released, removed from the AVL tree and destroyed if there are no waiters.

This scheme has two important properties:

1) No memory allocations are performed while holding one of the z_hold_locks.
   This ensures evict(), which can be called from direct memory reclaim, will
   never block waiting on a z_hold_locks which just happens to have hashed
   to the same index.

2) All locks used to serialize access to an object are per-object and never
   shared.  This minimizes lock contention without creating a large number
   of dedicated locks.

On the downside it does require znode_lock_t structures to be frequently
allocated and freed.  However, because these are backed by a kmem cache
and very short lived this cost is minimal.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4106
2016-01-15 15:33:45 -08:00
Brian Behlendorf 0720116d4d Add zfs_object_mutex_size module option
Add a zfs_object_mutex_size module option to facilitate resizing the
the per-dataset znode mutex array.  Increasing this value may help
make the deadlock described in #4106 less common, but this is not a
proper fix.  This patch is primarily to aid debugging and analysis.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #4106
2016-01-15 15:33:44 -08:00
Brian Behlendorf d21f279a94 Illumos 3465, 3466, 3467, 3468, 3470, 3473
3465 ::walk ... | ::<dcmd> misinterprets input as symbol names
3466 ::tsd should handle missing/NULL values better
3467 mdb_ctf_vread() could be more useful
3468 mdb enhancements for zfs development
3470 ::whatis does not print callers from KMF_LITE
3473 mdb_get_module() returns wrong module
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@nexenta.com>

References:
  https://www.illumos.org/issues/3468
  https://github.com/illumos/illumos-gate/commit/28e4da2

Porting notes:
- The only portion of this patch which applies to ZoL is a small
  change to types used in the refcount structure.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4216
2016-01-13 13:56:27 -08:00
Brian Behlendorf 89666a8e1c Increase default user space stack size
Under RHEL6/CentOS6 the default stack size must be increased to 32K
to prevent overflowing the stack when running ztest.  This isn't an
issue for other distributions due to either the version of pthreads
or perhaps the compiler.  Doubling the stack size resolves the
issue safely for all distribution and leaves us some headroom.

$ sudo -E ztest -V -T 300 -f /var/tmp/
5 vdevs, 7 datasets, 23 threads, 300 seconds...

loading space map for vdev 0 of 1, metaslab 0 of 30 ...
...
loading space map for vdev 0 of 1, metaslab 14 of 30 ...
child died with signal 11
Exited ztest with error 3

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4215
2016-01-13 13:55:12 -08:00
Will Andrews e6cfd633be Illumos 3749 - zfs event processing should work on R/O root filesystems
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3749
  https://github.com/illumos/illumos-gate/commit/3cb69f7

Porting notes:
- [include/sys/spa_impl.h]
  - ffe9d38 Add generic errata infrastructure
  - 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
  - 2668527 Add linux events
  - 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
  - Updated spa_config_sync() to match illumos with the exception
    of a Linux specific block.

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-12 14:42:32 -08:00
Matthew Ahrens d25b4497b7 Illumos 5141 - zfs minimum indirect block size is 4K
5141 zfs minimum indirect block size is 4K
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5141
  https://github.com/illumos/illumos-gate/commit/e94f268

Porting notes:
- GRUB  --  GRand Unified Bootloader change wasn't merged (not applicable)

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-12 14:11:31 -08:00
Justin T. Gibbs 0eb21616fa Illumos 6171 - dsl_prop_unregister() slows down dataset eviction.
6171 dsl_prop_unregister() slows down dataset eviction.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/6171
  https://github.com/illumos/illumos-gate/commit/03bad06

Porting notes:
  - Conflicts
    - 3558fd7 Prototype/structure update for Linux
    - 2cf7f52 Linux compat 2.6.39: mount_nodev()
    - 13fe019 Illumos #3464
    - 241b541 Illumos 5959 - clean up per-dataset feature count code
  - dsl_prop_unregister() preserved until out of tree consumers
    like Lustre can transition to dsl_prop_unregister_all().
  - Fixing 'space or tab at end of line' in include/sys/dsl_dataset.h

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-12 10:53:12 -08:00
Matthew Ahrens 7f60329a26 Illumos 5987 - zfs prefetch code needs work
5987 zfs prefetch code needs work
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>

References:
  https://www.illumos.org/issues/5987 zfs prefetch code needs work
  illumos/illumos-gate@cf6106c 5987 zfs prefetch code needs work

Porting notes:
- [module/zfs/dbuf.c]
  - 5f6d0b6 Handle block pointers with a corrupt logical size
- [module/zfs/dmu_zfetch.c]
  - c65aa5b Fix gcc missing parenthesis warnings
  - 428870f Update core ZFS code from build 121 to build 141.
  - 79c76d5 Change KM_PUSHPAGE -> KM_SLEEP
  - b8d06fc Switch KM_SLEEP to KM_PUSHPAGE
  - Account for ISO C90 - mixed declarations and code - warnings
  - Module parameters (new/changed):
    - Replaced zfetch_block_cap with zfetch_max_distance
      (Max bytes to prefetch per stream (default 8MB; 8 * 1024 * 1024))
    - Preserved zfs_prefetch_disable as 'int' for consistency with
      existing Linux module options.
- [include/sys/trace_arc.h]
  - Added new tracepoints
    - DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__sync__wait__for__async);
    - DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__demand__hit__predictive__prefetch);
- [man/man5/zfs-module-parameters.5]
  - Updated man page

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-12 09:02:33 -08:00
Brian Behlendorf b870c7e5f4 Revert "Illumos 3749 - zfs event processing should work on R/O root filesystems"
This reverts commit b47637ecdc which
introduced a regression in ztest.

$ ./cmd/ztest/ztest -V
5 vdevs, 7 datasets, 23 threads, 300 seconds...
*** Error in `/rpool/home/behlendo/src/git/zfs/cmd/ztest/.libs/lt-ztest':
double free or corruption (fasttop): 0x0000000000d339f0 ***
2016-01-11 14:10:30 -08:00
Matthew Ahrens 1715493f38 Illumos 4929 - want prevsnap property
4929 want prevsnap property
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Matt Amdur <matt.amdur@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4929
  https://github.com/illumos/illumos-gate/commit/b461c74

Porting notes:
- [include/sys/fs/zfs.h]
  - f67d70 Create an 'overlay' property
  - 11b9ec Add full SELinux support
- [fs/zfs/dsl_dataset.c]
  - This increases the stack size of dsl_dataset_stats() but
    nothing has been changed until this is shown to be an issue.

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 11:58:26 -08:00
Matthew Ahrens 9867e8be2a Illumos 4891 - want zdb option to dump all metadata
4891 want zdb option to dump all metadata
Reviewed by: Sonu Pillai <sonu.pillai@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>

We'd like a way for zdb to dump metadata in a machine-readable
format, so that we can bring that back from a customer site for
in-house diagnosis.  Think of it as a crash dump for zpools,
which can be used for post-mortem analysis of a malfunctioning
pool

References:
  https://www.illumos.org/issues/4891
  https://github.com/illumos/illumos-gate/commit/df15e41

Porting notes:
- [cmd/zdb/zdb.c]
  - a5778ea zdb: Introduce -V for verbatim import
  - In main() getopt 'opt' variable removed and the code was
    brought back in line with illumos.
- [lib/libzpool/kernel.c]
  - 1e33ac1 Fix Solaris thread dependency by using pthreads
  - f0e324f Update utsname support
  - 4d58b69 Fix vn_open/vn_rdwr error handling
  - In vn_open() allocate 'dumppath' on heap instead of stack
  - Properly handle 'dump_fd == -1' error path
  - Free 'realpath' after added vn_dumpdir_code block

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 11:36:54 -08:00
Will Andrews b47637ecdc Illumos 3749 - zfs event processing should work on R/O root filesystems
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3749
  https://github.com/illumos/illumos-gate/commit/3cb69f7

Porting notes:
- [include/sys/spa_impl.h]
  - ffe9d38 Add generic errata infrastructure
  - 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
  - 2668527 Add linux events
  - 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
  - Updated spa_config_sync() to match illumos with the exception
    of a Linux specific block.

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 09:23:37 -08:00
Paul Dagnelie fcff0f35bd Illumos 5960, 5925
5960 zfs recv should prefetch indirect blocks
5925 zfs receive -o origin=
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>

References:
  https://www.illumos.org/issues/5960
  https://www.illumos.org/issues/5925
  https://github.com/illumos/illumos-gate/commit/a2cdcdd

Porting notes:
- [lib/libzfs/libzfs_sendrecv.c]
  - b8864a2 Fix gcc cast warnings
  - 325f023 Add linux kernel device support
  - 5c3f61e Increase Linux pipe buffer size on 'zfs receive'
- [module/zfs/zfs_vnops.c]
  - 3558fd7 Prototype/structure update for Linux
  - c12e3a5 Restructure zfs_readdir() to fix regressions
- [module/zfs/zvol.c]
  - Function @zvol_map_block() isn't needed in ZoL
  - 9965059 Prefetch start and end of volumes
- [module/zfs/dmu.c]
  - Fixed ISO C90 - mixed declarations and code
  - Function dmu_prefetch() 'int i' is initialized before
    the following code block (c90 vs. c99)
- [module/zfs/dbuf.c]
  - fc5bb51 Fix stack dbuf_hold_impl()
  - 9b67f60 Illumos 4757, 4913
  - 34229a2 Reduce stack usage for recursive traverse_visitbp()
- [module/zfs/dmu_send.c]
  - Fixed ISO C90 - mixed declarations and code
  - b58986e Use large stacks when available
  - 241b541 Illumos 5959 - clean up per-dataset feature count code
  - 77aef6f Use vmem_alloc() for nvlists
  - 00b4602 Add linux kernel memory support

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-08 15:08:19 -08:00
Matthew Ahrens 37f8a8835a Illumos 5746 - more checksumming in zfs send
5746 more checksumming in zfs send
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@omniti.com>

References:
  https://www.illumos.org/issues/5746
  https://github.com/illumos/illumos-gate/commit/98110f0
  https://github.com/zfsonlinux/zfs/issues/905

Porting notes:
- Minor conflicts due to:
  - https://github.com/zfsonlinux/zfs/commit/2024041
  - https://github.com/zfsonlinux/zfs/commit/044baf0
  - https://github.com/zfsonlinux/zfs/commit/88904bb
- Fix ISO C90 warnings (-Werror=declaration-after-statement)
  - arc_buf_t *abuf;
  - dmu_buf_t *bonus;
  - zio_cksum_t cksum_orig;
  - zio_cksum_t *cksump;
- Fix format '%llx' format specifier warning
- Align message in zstreamdump safe_malloc() with upstream

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3611
2015-12-30 14:24:14 -08:00
Ned Bass 43b4935e53 Prevent SA length overflow
The function sa_update() accepts a 32-bit length parameter and
assigns it to a 16-bit field in sa_bulk_attr_t, potentially
truncating the passed-in value. This could lead to corrupt system
attribute (SA) records getting written to the pool. Add a VERIFY to
sa_update() to detect cases where overflow would occur. The SA length
is limited to 16-bit values by the on-disk format defined by
sa_hdr_phys_t.

The function zfs_sa_set_xattr() is vulnerable to this bug if the
unpacked nvlist of xattrs is less than 64k in size but the packed
size is greater than 64k. Fix this by appropriately checking the
size of the packed nvlist before calling sa_update(). Add error
handling to zpl_xattr_set_sa() to keep the cached list of SA-based
xattrs consistent with the data on disk.

Lastly, zfs_sa_set_xattr() calls dmu_tx_abort() on an assigned
transaction if sa_update() returns an error, but the DMU only allows
unassigned transactions to be aborted. Wrap the sa_update() call in a
VERIFY0, remove the transaction abort, and call dmu_tx_commit()
unconditionally. This is consistent practice with other callers
of sa_update().

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #4150
2015-12-30 13:20:12 -08:00
Chris Williamson 23de906c72 Illumos 5745 - zfs set allows only one dataset property to be set at a time
5745 zfs set allows only one dataset property to be set at a time
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5745
  https://github.com/illumos/illumos-gate/commit/3092556

Porting notes:
- Fix the missing braces around initializer, zfs_cmd_t zc = {"\0"};
- Remove extra format argument in zfs_do_set()
- Declare at the top:
  - zfs_prop_t prop;
  - nvpair_t *elem;
  - nvpair_t *next;
  - int i;
- Additionally initialize:
  - int added_resv = 0;
  - zfs_prop_t prop = 0;
- Assign 0 install of NULL for uint64_t types.
  - zc->zc_nvlist_conf = '\0';
  - zc->zc_nvlist_src = '\0';
  - zc->zc_nvlist_dst = '\0';

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3574
2015-12-29 16:59:26 -08:00
Olaf Faaland e0553a74ad Add lock types RW_NOLOCKDEP and MUTEX_NOLOCKDEP
Both lock types were introduced in SPL to allow some locks to be
taken/released with linux lockdep turned off.  See SPL commit for
details.

Add the new lock types to zfs_context.h to allow user space compilation.

Depends on SPL commit 692ae8d
SPL pull request refs/pull/480/head

Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3895
2015-12-22 10:20:29 -08:00
Brian Behlendorf 6fe53787f3 Fix vdev_queue_aggregate() deadlock
This deadlock may manifest itself in slightly different ways but
at the core it is caused by a memory allocation blocking on file-
system reclaim in the zio pipeline.  This is normally impossible
because zio_execute() disables filesystem reclaim by setting
PF_FSTRANS on the thread.  However, kmem cache allocations may
still indirectly block on file system reclaim while holding the
critical vq->vq_lock as shown below.

To resolve this issue zio_buf_alloc_flags() is introduced which
allocation flags to be passed.  This can then be used in
vdev_queue_aggregate() with KM_NOSLEEP when allocating the
aggregate IO buffer.  Since aggregating the IO is purely a
performance optimization we want this to either succeed or fail
quickly.  Trying too hard to allocate this memory under the
vq->vq_lock can negatively impact performance and result in
this deadlock.

* z_wr_iss
zio_vdev_io_start
  vdev_queue_io -> Takes vq->vq_lock
    vdev_queue_io_to_issue
      vdev_queue_aggregate
        zio_buf_alloc -> Waiting on spl_kmem_cache process

* z_wr_int
zio_vdev_io_done
  vdev_queue_io_done
    mutex_lock -> Waiting on vq->vq_lock held by z_wr_iss

* txg_sync
spa_sync
  dsl_pool_sync
    zio_wait -> Waiting on zio being handled by z_wr_int

* spl_kmem_cache
spl_cache_grow_work
  kv_alloc
    spl_vmalloc
      ...
      evict
        zpl_evict_inode
          zfs_inactive
            dmu_tx_wait
              txg_wait_open -> Waiting on txg_sync

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #3808
Closes #3867
2015-12-18 13:27:12 -08:00
Chunwei Chen 2727b9d3b6 Use uio for zvol_{read,write}
Since uio now supports bvec, we can convert bio into uio and reuse
dmu_{read,write}_uio. This way, we can remove some duplicate code.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4078
2015-12-15 16:21:43 -08:00
Chunwei Chen 24ef51f660 Use spa as key besides objsetid for snapentry
objsetid is not unique across pool, so using it solely as key would cause
panic when automounting two snapshot on different pools with the same
objsetid. We fix this by adding spa pointer as additional key.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3948
Issue #3786
Issue #3887
2015-12-08 16:38:56 -08:00
Matthew Ahrens 241b541574 Illumos 5959 - clean up per-dataset feature count code
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5959
  https://github.com/illumos/illumos-gate/commit/ca0cc39

Porting notes:

illumos code doesn't check for feature_get_refcount() returning
ENOTSUP (which means feature is disabled) in zdb. zfsonlinux added
a check in https://github.com/zfsonlinux/zfs/commit/784652c
due to #3468. The check was reintroduced here.

Ported-by: Witaut Bajaryn <vitaut.bayaryn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3965
2015-12-04 14:20:20 -08:00
Brian Behlendorf 072484504f Add zap_prefetch() interface
Provide a generic interface to prefetch ZAP entries by name.  This
functionality is being added for external consumers such as Lustre.
It is based of the existing zap_prefetch_uint64() version which is
used by the deduplication code.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #4061
2015-12-04 09:39:20 -08:00
ilovezfs 917b8c5cec Ext4's typical GPT partition type not recognized
Adding additional entries to the efi conversion array will help prevent
the overwriting of the GPTs of disks with in-use file systems in more
cases. Most notably, this adds partition type 8300 "Linux filesystem"
(0FC63DAF-8483-4772-8E79-3D69D8477DE4), which is often used for ext4 and
btrfs, among others.

This commit itself does nothing to address the underlying problematic
behavior that check_slice() isn't called on partitions of an
unrecognized type, even when they contain a currently mounted file
system.

The additional entries were derived from these two resources:
https://en.wikipedia.org/wiki/GUID_Partition_Table
http://sourceforge.net/p/gptfdisk/code/ci/master/tree/parttypes.cc

Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4016
2015-12-04 09:27:00 -08:00
Yuri Pankov fc80384923 Illumos 934 - FreeBSD's GPT not recognized
Reviewed by: Alexander Eremin <alexander.r.eremin@gmail.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Andrew Stormont <Andrew.Stormont@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/934
  https://github.com/illumos/illumos-gate/commit/e21ea67

Ported-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4016
2015-12-04 09:19:40 -08:00
Richard Yao b22e279797 Only trigger SET_ERROR tracepoint event on error
Currently, the SET_ERROR tracepoint triggers regardless of whether there
is an error or not. On Illumos, SET_ERROR only triggers on an actual
error, which is avoids irrelevant noise. Linux 2.6.38 added support for
conditional tracepoints, so we modify SET_ERROR to use them when they
are avaliable for functionality equivalent to the Illumos functionality.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4043
2015-12-02 17:16:41 -08:00
Chunwei Chen 61d482f7cd Linux 4.4 compat: xattr operations takes xattr_handler
The xattr_hander->{list,get,set} were changed to take a xattr_handler,
and handler_flags argument was removed and should be accessed by
handler->flags.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
2015-12-01 16:48:25 -08:00
Justin T. Gibbs bc4501f75a Illumos 6267 - dn_bonus evicted too early
6267 dn_bonus evicted too early
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Xin LI <delphij@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/6267
  https://github.com/illumos/illumos-gate/commit/d205810

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Ned Bass bass6@llnl.gov
Issue #3865
Issue #3443
2015-10-13 14:12:02 -07:00
Lukas Wunner 784a7fe5d9 Linux 4.3 compat: bio_end_io_t / BIO_UPTODATE
Commit torvalds/linux@4246a0b63b
("block: add a bi_error field to struct bio") dropped the error
argument from bio_endio in favor of newly introduced bio->bi_error.
This also replaces bio->bi_flags value BIO_UPTODATE.

bio_endio was a 3 argument function until Linux 2.6.24, which made it
a 2 argument function, and now the prototype has changed yet again to
a 1 argument function. Support for pre 2.6.24 kernels was already
dropped with 37f9dac592 ("zvol processing should use struct bio")
which assumed the 2 argument version in zvol_request(). Remaining code
to support the 3 argument version is hereby removed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Issue #3799
2015-09-25 12:44:54 -07:00
Don Brady 56b3986316 Add large block support to zpios(1) benchmark
As part of the large block support effort, it makes sense to add
support for large blocks to **zpios(1)**. The specifying of a zfs
block size for zpios is optional and will default to 128K if the
block size is not specified.

  `zpios ... -S size | --blocksize size ...`

This will use *size* ZFS blocks for each test, specified as a comma
delimited list with an optional unit suffix. The supported range is
powers of two from 128K through 16M. A range of block sizes can be
tested as follows: `-S 128K,256K,512K,1M`

Example run below
(non realistic results from a VM and output abbreviated for space)

```
 --regioncount=750 --regionsize=8M --chunksize=1M --offset=4K
 --threaddelay=0 --cleanup --human-readable --verbose --cleanup
 --blocksize=128K,256K,512K,1M

 th-cnt  rg-cnt  rg-sz  ch-sz  blksz  wr-data wr-bw   rd-data rd-bw
---------------------------------------------------------------------
 4       750     8m     1m     128k   5g      90.06m  5g      93.37m
 4       750     8m     1m     256k   5g      79.71m  5g      99.81m
 4       750     8m     1m     512k   5g      42.20m  5g      93.14m
 4       750     8m     1m     1m     5g      35.51m  5g      89.36m
 8       750     8m     1m     128k   5g      85.49m  5g      90.81m
 8       750     8m     1m     256k   5g      61.42m  5g      99.24m
 8       750     8m     1m     512k   5g      49.09m  5g     108.78m
 16      750     8m     1m     128k   5g      86.28m  5g      88.73m
 16      750     8m     1m     256k   5g      64.34m  5g      93.47m
 16      750     8m     1m     512k   5g      68.84m  5g     124.47m
 16      750     8m     1m     1m     5g      53.97m  5g      97.20m
---------------------------------------------------------------------
```

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3795
Closes #2071
2015-09-22 09:13:20 -07:00
Ned Bass 3af56fd95f Honor xattr=sa dataset property
ZFS incorrectly uses directory-based extended attributes even when
xattr=sa is specified as a dataset property or mount option. Support to
honor temporary mount options including "xattr" was added in commit
0282c4137e. There are two issues with the
mount option handling:

* Libzfs has historically included "xattr" in its list of default mount
  options. This overrides the dataset property, so the dataset is always
  configured to use directory-based xattrs even when the xattr dataset
  property is set to off or sa. Address this by removing "xattr" from
  the set of default mount options in libzfs.

* There was no way to enable system attribute-based extended attributes
  using temporary mount options. Add the mount options "saxattr" and
  "dirxattr" which enable the xattr behavior their names suggest.  This
  approach has the advantages of mirroring the valid xattr dataset
  property values and following existing conventions for mount option
  names.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3787
2015-09-19 14:04:14 -07:00
Arne Jansen 4e0f33ffe0 Illumos 6214 - zpools going south
6214 zpools going south
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>

References:
  https://www.illumos.org/issues/6214
  http://cr.illumos.org/~webrev/sensille/6214_zpools_going_south/

Porting Notes:

Reintroduce b_compress to the l2arc_buf_hdr_t.  In commit b9541d6
the compression flags were moved to the generic b_flags in the
arc_buf_hdr_t.  This is a problem because l2arc_compress_buf()
may manipulate the compression flags and this can only be done
safely under the hash lock which is not held.  See Illumos 6214
for a detailed analysis of the race.

HDR_GET_COMPRESS() macro was removed from arc_buf_info().

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3757
2015-09-11 11:14:38 -07:00
Richard Yao 8198d18ca7 Reintroduce IO accounting on zvols on Linux 3.19+
zfsonlinux/zfs@e20cd6f7a8 caused us to
lose IO accounting on zvols. When I originally wrote that last year, the
symbols we needed to maintain IO accounting were GPL exported, but
torvalds/linux@394ffa503b provided
suitable symbols for restoring this functionality 4 months later.  We
can call them to restore the IO accounting on Linux 3.19 and later as
well as any older kernels where that patch is backported.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3741
2015-09-09 09:29:24 -07:00
Brian Behlendorf 3b36f8319d Add dbgmsg kstat
Internally ZFS keeps a small log to facilitate debugging.  By default
the log is disabled, to enable it set zfs_dbgmsg_enable=1.  The contents
of the log can be accessed by reading the /proc/spl/kstat/zfs/dbgmsg file.
Writing 0 to this proc file clears the log.

$ echo 1 >/sys/module/zfs/parameters/zfs_dbgmsg_enable
$ echo 0 >/proc/spl/kstat/zfs/dbgmsg
$ zpool import tank
$ cat /proc/spl/kstat/zfs/dbgmsg
1 0 0x01 -1 0 2492357525542 2525836565501
timestamp    message
1441141408   spa=tank async request task=1
1441141408   txg 70 open pool version 5000; software version 5000/5; ...
1441141409   spa=tank async request task=32
1441141409   txg 72 import pool version 5000; software version 5000/5; ...
1441141414   command: lt-zpool import tank

Note the zfs_dbgmsg() and dprintf() functions are both now mapped to
the same log.  As mentioned above the kernel debug log can be accessed
though the /proc/spl/kstat/zfs/dbgmsg kstat.  For user space consumers
log messages are immediately written to stdout after applying the
ZFS_DEBUG environment variable.

$ ZFS_DEBUG=on ./cmd/ztest/ztest -V

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #3728
2015-09-04 16:08:14 -07:00
Brian Behlendorf e20cd6f7a8 Merge branch 'zvol'
Performance improvements for zvols.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3720
2015-09-04 13:14:21 -07:00
Richard Yao 7d6e2adb4e Remove blk_rq_bytes()/blk_rq_sectors autotools checks
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:37:24 -04:00
Richard Yao f952eaa7ec Remove blk_rq_pos() autotools check
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:37:24 -04:00
Richard Yao f8c56b405d Remove blk_fetch_request() autotools check
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:37:24 -04:00
Richard Yao e8c6be131c Remove blk_requeue_request() autotools check
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:37:24 -04:00
Richard Yao dd6f9fe61b Remove blk_end_request() autotools check.
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:37:24 -04:00
Richard Yao 65f340e725 Remove rq_is_sync() autotools check
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:37:24 -04:00
Richard Yao 9ddf9b8e15 Remove rq_for_each_segment() autotools check
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:37:24 -04:00
Richard Yao 37f9dac592 zvol processing should use struct bio
Internally, zvols are files exposed through the block device API. This
is intended to reduce overhead when things require block devices.
However, the ZoL zvol code emulates a traditional block device in that
it has a top half and a bottom half. This is an unnecessary source of
overhead that does not exist on any other OpenZFS platform does this.
This patch removes it. Early users of this patch reported double digit
performance gains in IOPS on zvols in the range of 50% to 80%.

Comments in the code suggest that the current implementation was done to
obtain IO merging from Linux's IO elevator. However, the DMU already
does write merging while arc_read() should implicitly merge read IOs
because only 1 thread is permitted to fetch the buffer into ARC. In
addition, commercial ZFSOnLinux distributions report that regular files
are more performant than zvols under the current implementation, and the
main consumers of zvols are VMs and iSCSI targets, which have their own
elevators to merge IOs.

Some minor refactoring allows us to register zfs_request() as our
->make_request() handler in place of the generic_make_request()
function. This eliminates the layer of code that broke IO requests on
zvols into a top half and a bottom half. This has several benefits:

1. No per zvol spinlocks.
2. No redundant IO elevator processing.
3. Interrupts are disabled only when actually necessary.
4. No redispatching of IOs when all taskq threads are busy.
5. Linux's page out routines will properly block.
6. Many autotools checks become obsolete.

An unfortunate consequence of eliminating the layer that
generic_make_request() is that we no longer calls the instrumentation
hooks for block IO accounting. Those hooks are GPL-exported, so we
cannot call them ourselves and consequently, we lose the ability to do
IO monitoring via iostat.  Since zvols are internally files mapped as
block devices, this should be okay. Anyone who is willing to accept the
performance penalty for the block IO layer's accounting could use the
loop device in between the zvol and its consumer. Alternatively, perf
and ftrace likely could be used. Also, tools like latencytop will still
work. Tools such as latencytop sometimes provide a better view of
performance bottlenecks than the traditional block IO accounting tools
do.

Lastly, if direct reclaim occurs during spacemap loading and swap is on
a zvol, this code will deadlock. That deadlock could already occur with
sync=always on zvols. Given that swap on zvols is not yet production
ready, this is not a blocker.

Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-04 15:30:24 -04:00
Brian Behlendorf 0282c4137e Add temporary mount options
Add the required kernel side infrastructure to parse arbitrary
mount options.  This enables us to support temporary mount
options in largely the same way it is handled on other platforms.

See the 'Temporary Mount Point Properties' section of zfs(8)
for complete details.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #985
Closes #3351
2015-09-03 14:14:55 -07:00
Richard Yao 782b2c326e VDEV_REQ_FUA should be mapped to REQ_FUA
Pre-2.6.37 kernels support REQ_FUA in request flags, but not in BIO
flags. zvols are the only consumer of VDEV_REQ_FUA and since they are
passed requests, they should be obey the REQ_FUA flag like later
kernels. This optimization will only matter on 2.6.36 and 2.6.37 because
the zvol rework changes things to use bio, where we no longer are able
to distinguish on earlier kernels

Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-09-02 12:39:08 -04:00
Tim Chase 69de34219a Dbuf hash table should be sized as is the arc hash table
Commit 49ddb31506 added the
zfs_arc_average_blocksize parameter to allow control over the size of
the arc hash table.  The dbuf hash table's size should be determined
similarly.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3721
2015-09-02 09:33:02 -07:00
Richard Yao fb40095f5f Disable LBA weighting on files and SSDs
The LBA weighting makes sense on rotational media where the outer tracks
have twice the bandwidth of the inner tracks. However, it is detrimental
on nonrotational media such as solid state disks, where the only effect
is to ensure that metaslabs enter the best-fit allocation behavior
sooner, which is detrimental to performance. It also makes no sense on
files where the underlying filesystem can arrange things however it
wants.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3712
2015-09-01 15:22:07 -07:00
Richard Yao 97771edaca Remove blk_queue_io_opt() autotools check
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-09-01 09:33:18 -07:00
Richard Yao 3c119330a6 Remove blk_queue_physical_block_size() autotools check
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-09-01 09:33:18 -07:00
Brian Behlendorf 278bee9319 Linux 3.18 compat: Snapshot auto-mounting
Re-factor the .zfs/snapshot auto-mouting code to take in to account
changes made to the upstream kernels.  And to lay the groundwork for
enabling access to .zfs snapshots via NFS clients.  This patch makes
the following core improvements.

* All actively auto-mounted snapshots are now tracked in two global
trees which are indexed by snapshot name and objset id respectively.
This allows for fast lookups of any auto-mounted snapshot regardless
without needing access to the parent dataset.

* Snapshot entries are added to the tree in zfsctl_snapshot_mount().
However, they are now removed from the tree in the context of the
unmount process.  This eliminates the need complicated error logic
in zfsctl_snapshot_unmount() to handle unmount failures.

* References are now taken on the snapshot entries in the tree to
ensure they always remain valid while a task is outstanding.

* The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right
after the auto-mount succeeds.  This allows to kernel to unmount
idle auto-mounted snapshots if needed removing the need for the
zfsctl_unmount_snapshots() function.

* Snapshots in active use will not be automatically unmounted.  As
long as at least one dentry is revalidated every zfs_expire_snapshot/2
seconds the auto-unmount expiration timer will be extended.

* Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS
to be immediately unmounted when the dentry was revalidated.  This
was a consequence of ZFS invaliding all snapdir dentries to ensure that
negative dentries didn't mask new snapshots.  This patch modifies the
behavior such that only negative dentries are invalidated.  This solves
the issue and may result in a performance improvement.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3589
Closes #3344
Closes #3295
Closes #3257
Closes #3243
Closes #3030
Closes #2841
2015-08-31 13:54:39 -07:00
Brian Behlendorf 4cb7b9c5d4 Check large block feature flag on volumes
Since ZoL allows large blocks to be used by volumes, unlike upstream
illumos, the feature flag must be checked prior to volume creation.
This is critical because unlike filesystems, volumes will create a
object which uses large blocks as part of the create.  Therefore, it
cannot be safely checked in zfs_check_settable() after the dataset
can been created.

In addition this patch updates the relevant error messages to use
zfs_nicenum() to print the maximum blocksize.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3591
2015-08-28 09:25:03 -07:00
Chunwei Chen 17888ae30d Add compatibility layer for {kmap,kunmap}_atomic
Starting from linux-2.6.37, {kmap,kunmap}_atomic takes 1 argument instead of 2.
We use zfs_{kmap,kunmap}_atomic as wrappers and always take 2 argument, but
ignore the 2nd for newer kernel.

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-08-24 10:13:25 -07:00
Chris Dunlop 9d4f86e825 Fix build failure with Linux 4.1 and FTRACE
See also #3546, commit c1718e9

Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3673
2015-08-18 16:47:21 -07:00
Frédéric VANNIÈRE c1718e9580 Fix build failure with Linux 4.1 and FTRACE
Signed-off-by: Frédéric VANNIÈRE <f.vanniere@planet-work.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3546
2015-07-29 07:35:06 -07:00
Brian Behlendorf 1229323d5f Align thread priority with Linux defaults
Under Linux filesystem threads responsible for handling I/O are
normally created with the maximum priority.  Non-I/O filesystem
processes run with the default priority.  ZFS should adopt the
same priority scheme under Linux to maintain good performance
and so that it will complete fairly when other Linux filesystems
are active.  The priorities have been updated to the following:

$ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta'
     -  TS 10743  19 -20 [spl_kmem_cache]
     -  TS 10744  19 -20 [spl_system_task]
     -  TS 10745  19 -20 [spl_dynamic_tas]
     -  TS 10764  19   0 [dbu_evict]
     -  TS 10765  19   0 [arc_prune]
     -  TS 10766  19   0 [arc_reclaim]
     -  TS 10767  19   0 [arc_user_evicts]
     -  TS 10768  19   0 [l2arc_feed]
     -  TS 10769  39   0 [z_unmount]
     -  TS 10770  39 -20 [zvol]
     -  TS 11011  39 -20 [z_null_iss]
     -  TS 11012  39 -20 [z_null_int]
     -  TS 11013  39 -20 [z_rd_iss]
     -  TS 11014  39 -20 [z_rd_int_0]
     -  TS 11022  38 -19 [z_wr_iss]
     -  TS 11023  39 -20 [z_wr_iss_h]
     -  TS 11024  39 -20 [z_wr_int_0]
     -  TS 11032  39 -20 [z_wr_int_h]
     -  TS 11033  39 -20 [z_fr_iss_0]
     -  TS 11041  39 -20 [z_fr_int]
     -  TS 11042  39 -20 [z_cl_iss]
     -  TS 11043  39 -20 [z_cl_int]
     -  TS 11044  39 -20 [z_ioctl_iss]
     -  TS 11045  39 -20 [z_ioctl_int]
     -  TS 11046  39 -20 [metaslab_group_]
     -  TS 11050  19   0 [z_iput]
     -  TS 11121  38 -19 [z_wr_iss]

Note that under Linux the meaning of a processes priority is inverted
with respect to illumos.  High values on Linux indicate a _low_ priority
while high value on illumos indicate a _high_ priority.

In order to preserve the logical meaning of the minclsyspri and
maxclsyspri macros when they are used by the illumos wrapper functions
their values have been inverted.  This way when changes are merged
from upstream illumos we won't need to remember to invert the macro.
It could also lead to confusion.

This patch depends on https://github.com/zfsonlinux/spl/pull/466.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #3607
2015-07-28 13:36:47 -07:00
Prakash Surya 36da08ef9b Illumos 5817 - change type of arcs_size from uint64_t to refcount_t
5817 change type of arcs_size from uint64_t to refcount_t
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/5817
  https://github.com/illumos/illumos-gate/commit/2fd872a

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
2015-07-23 09:42:28 -07:00
Matthew Ahrens ca67b33aba Illumos 5376 - arc_kmem_reap_now() should not result in clearing arc_no_grow
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5376
  https://github.com/illumos/illumos-gate/commit/2ec99e3

Porting Notes:

The good news is that many of the recent changes made upstream to the
ARC tackled issues previously observed by ZoL with similar solutions.
The bad news is those solution weren't identical to the ones we applied.
This patch is designed to split the difference and apply as much of the
upstream work as possible.

* The arc_available_memory() function was removed previous in ZoL but
due to the upstream changes it makes sense to add it back.  This function
has been customized for Linux so that it can be used to determine a low
memory.  This provides the same basic functionality as the illumos version
allowing us to minimize changes through the rest of the code base.  The
exact mechanism used to detect a low memory state remains unchanged so
this change isn't a significant as it might first appear.

* This patch includes the long standing fix for arc_shrink() which was
originally proposed in #2167.  Since there were related changes to this
function it made sense to include that work.

* The arc_init() function has been re-factored.  As before it sets sane
default values for the ARC but then calls arc_tuning_update() to apply
user specific tuning made via module options.  The arc_tuning_update()
function is then called periodically by the arc_reclaim_thread() to
apply changes to the tunings made during normal operation.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3616
Closes #2167
2015-07-23 09:41:28 -07:00
Brian Behlendorf e80da86447 Linux 4.2 compat: bdi_setup_and_register()
The vfs_compat.h header should include the linux/backing-dev.h header
because it depends on the bdi_* functions defined there.  In previous
kernels this header was being indirectly included which prevented a
build failure.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #3596
2015-07-17 09:15:43 -07:00
Matthew Ahrens 905edb405d Illumos 5347 - idle pool may run itself out of space
5347 idle pool may run itself out of space
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://github.com/illumos/illumos-gate/commit/231aab8
  https://github.com/illumos/illumos-gate/commit/4a92375 3642
  https://www.illumos.org/issues/5347
  https://github.com/zfsonlinux/zfs/commit/89b1cd6 (partial commit & fix)
  https://github.com/zfsonlinux/zfs/commit/fbeddd6 Illumos 4390
  https://github.com/zfsonlinux/zfs/commit/2696dfa Illumos 3642, 3643

Porting notes:
This is completing the partial fix from FreeBSD

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3586
2015-07-14 10:35:21 -07:00
Justin T. Gibbs 99197f034e Illumos 5661 - ZFS: "compression = on" should use lz4 if feature is enabled
5661 ZFS: "compression = on" should use lz4 if feature is enabled
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://github.com/illumos/illumos-gate/commit/db1741f
  https://www.illumos.org/issues/5661

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3571
2015-07-10 12:11:45 -07:00
Josef 'Jeff' Sipek 411bf201f5 Illumos 4745 - fix AVL code misspellings
4745 fix AVL code misspellings
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://github.com/illumos/illumos-gate/commit/6907ca4
  https://www.illumos.org/issues/4745

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3565
2015-07-10 11:58:37 -07:00
Alexander Motin e16b3fcc61 Illumos 5008 - lock contention (rrw_exit) while running a read only load
5008 lock contention (rrw_exit) while running a read only load
Reviewed by: Matthew Ahrens <matthew.ahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>

Porting notes:

This patch ported perfectly cleanly to ZoL.  During testing 100% cached
small-block reads, extreme contention was noticed on rrl->rr_lock from
rrw_exit() due to the frequent entering and leaving ZPL.  Illumos picked
up this patch from FreeBSD and it also helps under Linux.

On a 1-minute 4K cached read test with 10 fio processes pinned to a single
socket on a 4-socket (10 thread per socket) NUMA system, contentions on
rrl->rr_lock were reduced from 508799 to 43085.

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3555
2015-07-06 09:34:13 -07:00
Matthew Ahrens 4bda3bd0e7 Illumos 5911 - ZFS "hangs" while deleting file
5911 ZFS "hangs" while deleting file
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Alek Pinchuk <alek@nexenta.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5911
  https://github.com/illumos/illumos-gate/commit/46e1baa

Porting notes:

Resolved ISO C90 forbids mixed declarations and code wanting in
the dnode_free_range() function.

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3554
2015-07-06 09:31:42 -07:00
Arne Jansen 5e8cd5d17f Illumos 5981 - Deadlock in dmu_objset_find_dp
5981 Deadlock in dmu_objset_find_dp
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5981
  https://github.com/illumos/illumos-gate/commit/1d3f896

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3553
2015-07-06 09:31:35 -07:00
Matthew Ahrens 804e050457 Illumos 5175 - implement dmu_read_uio_dbuf() to improve cached read performance
5175 implement dmu_read_uio_dbuf() to improve cached read performance
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5175
  https://github.com/illumos/illumos-gate/commit/f8554bb

Porting notes:

This patch doesn't include the changes for the COMSTAR (Common
Multiprotocol SCSI Target) - since it's not available for ZoL.

http://thegreyblog.blogspot.co.at/2010/02/setting-up-solaris-comstar-and.html

Ported by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3392
2015-06-29 14:33:23 -07:00
Tim Chase 84045c2ddf Remove l2ad_evict from zfs_l2arc_evict_class
Illumos 5701 (zpool list reports incorrect "alloc" value for cache
devices) removed l2ad_evict from l2arc_dev_t.  It should also be removed
from the zfs_l2arc_evict_class event class.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3534
2015-06-29 09:21:58 -07:00
George Wilson 669dedb33f Illumos 5163 - arc should reap range_seg_cache
5163 arc should reap range_seg_cache
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5163
  https://github.com/illumos/illumos-gate/commit/83803b5

Porting Notes:

Added umem_cache_reap_now() wrapped to suppress unused variable
warning for user space build in arc_kmem_reap_now().

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-25 08:58:16 -07:00
Brian Behlendorf aa9af22cdf Update all default taskq settings
Over the years the default values for the taskqs used on Linux have
differed slightly from illumos.  In the vast majority of cases this
was done to avoid creating an obnoxious number of idle threads which
would pollute the process listing.

With the addition of support for dynamic taskqs all multi-threaded
queues should be created as dynamic taskqs.  This allows us to get
the best of both worlds.

* The illumos default values for the I/O pipeline can be restored.
These values are known to work well for most workloads.  The only
exception is the zio write interrupt taskq which is changed to
ZTI_P(12, 8).  At least under Linux more threads has been shown
to improve performance, see commit 7e55f4e.

* Reduces the number of idle threads on the system when it's not
under heavy load.  The maximum number of threads will only be
created when they are required.

* Remove the vdev_file_taskq and rely on the system_taskq instead
which is now dynamic and may have up to 64-threads.  Again this
brings us back inline with upstream.

* Tasks dispatched with taskq_dispatch_ent() are allowed to use
dynamic taskqs.  The Linux taskq implementation supports this.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #3507
2015-06-25 08:58:16 -07:00
Prakash Surya d962d5dad9 Illumos 5701 - zpool list reports incorrect "alloc" value for cache devices
5701 zpool list reports incorrect "alloc" value for cache devices
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alek Pinchuk <alek.pinchuk@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5701
  https://github.com/illumos/illumos-gate/commit/a52fc31

Porting Notes:

arc_space_return(HDR_L2ONLY_SIZE, ARC_SPACE_L2HDRS);
correctly placed at arc_hdr_l2hdr_destroy(arc_buf_hdr_t *hdr).

Ported by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-25 08:51:44 -07:00
Richard Yao 72540ea314 zfsdev_getminor() should check for invalid file handles
Unit testing at ClusterHQ found that passing an invalid file handle to
zfs_ioc_hold results in a NULL pointer dereference on a system without
assertions:

IP: [<ffffffffa0218aa0>] zfsdev_getminor+0x10/0x20 [zfs]
Call Trace:
[<ffffffffa021b4b0>] zfs_onexit_fd_hold+0x20/0x40 [zfs]
[<ffffffffa0214043>] zfs_ioc_hold+0x93/0xd0 [zfs]
[<ffffffffa0215890>] zfsdev_ioctl+0x200/0x500 [zfs]

An assertion would have caught this had they been enabled, but this is
something that the kernel module should handle without failing.  We
resolve this by searching the linked list to ensure that the file
handle's private_data points to a valid zfsdev_state_t.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3506
2015-06-22 17:02:13 -07:00
Brian Behlendorf b64ccd6c52 Rename cv_wait_interruptible() to cv_wait_sig()
This is the counterpart to zfsonlinux/spl@2345368 which replaces the
cv_wait_interruptible() function with cv_wait_sig().  There is no
functional change to patch merely brings the function names in to
sync to maximize portability.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3450
Issue #3402
2015-06-11 10:50:47 -07:00
Brian Behlendorf f604673836 Make arc_prune() asynchronous
As described in the comment above arc_adapt_thread() it is critical
that the arc_adapt_thread() function never sleep while holding a hash
lock.  This behavior was possible in the Linux implementation because
the arc_prune() logic was implemented to be synchronous.  Under
illumos the analogous dnlc_reduce_cache() function is asynchronous.

To address this the arc_do_user_prune() function is has been reworked
in to two new functions as follows:

* arc_prune_async() is an asynchronous implementation which dispatches
the prune callback to be run by the system taskq.  This makes it
suitable to use in the context of the arc_adapt_thread().

* arc_prune() is a synchronous implementation which depends on the
arc_prune_async() implementation but blocks until the outstanding
callbacks complete.  This is used in arc_kmem_reap_now() where it
is safe, and expected, that memory will be freed.

This patch additionally adds the zfs_arc_meta_strategy module option
while allows the meta reclaim strategy to be configured.  It defaults
to a balanced strategy which has been proved to work well under Linux
but the illumos meta-only strategy can be enabled.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-11 10:27:25 -07:00
Brian Behlendorf 4f34bd9792 Add taskq_wait_outstanding() function
SPL commit behlendorf/spl@9cef1b5 adds the taskq_wait_outstanding()
interface.  See the commit log for the full justification for this
addition.  This patch adds the required user space counterpart.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
2015-06-11 10:27:25 -07:00
Prakash Surya ca0bf58d65 Illumos 5497 - lock contention on arcs_mtx
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>

Porting notes and other significant code changes:

The illumos 5368 patch (ARC should cache more metadata), which
was never picked up by ZoL, is mostly reverted by this patch.

Since ZoL relies on the kernel asynchronously calling the shrinker to
actually reap memory, the shrinker wakes up arc_reclaim_waiters_cv every
time it runs.

The arc_adapt_thread() function no longer calls arc_do_user_evicts()
since the newly-added arc_user_evicts_thread() calls it periodically.

Notable conflicting ZoL commits which conflicted with this patch or
whose effects are either duplicated or un-done by this patch:

    302f753 - Integrate ARC more tightly with Linux
    39e055c - Adjust arc_p based on "bytes" in arc_shrink
    f521ce1 - Allow "arc_p" to drop to zero or grow to "arc_c"
    77765b5 - Remove "arc_meta_used" from arc_adjust calculation
    94520ca - Prune metadata from ghost lists in arc_adjust_meta

Trace support for multilist_insert() and multilist_remove() has been
added and produces the following output:

    fio-12498 [077] .... 112936.448324: zfs_multilist__insert: ml { offset 240 numsublists 80 sublistidx 63 }
    fio-12498 [077] .... 112936.448347: zfs_multilist__remove: ml { offset 240 numsublists 80 sublistidx 29 }

The following arcstats have been removed:

    recycle_miss - Used by arcstat.py and arc_summary.py, both of which
    have been updated appropriately.

    l2_writes_hdr_miss

The following arcstats have been added:

    evict_not_enough - Number of times arc_evict_state() was unable to
    evict enough buffers to reach its target amount.

    evict_l2_skip - Number of times arc_evict_hdr() skipped eviction
    because it was being written to the l2arc.

    l2_writes_lock_retry - Replaces l2_writes_hdr_miss.  Number of times
    l2arc_write_done() failed to acquire hash_lock (and re-tries).

    arc_meta_min - Shows the value of the zfs_arc_meta_min module
    parameter (see below).

The "index" column of the "dbuf" kstat has been removed since it doesn't
have a direct analog in the new multilist scheme.  Additional multilist-
related stats could be added in the future but would likely require
extensions to the mulilist API.

The following module parameters have been added:

    zfs_arc_evict_batch_limit - Number of ARC headers to free per sub-list
    before moving on to the next sub-list.

    zfs_arc_meta_min - Enforce a floor on the amount of metadata in
    the ARC.

    zfs_arc_num_sublists_per_state - Number of multilist sub-lists per
    ARC state.

    zfs_arc_overflow_shift - Controls amount by which the ARC must exceed
    the target size to be considered "overflowing".

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov
2015-06-11 10:27:25 -07:00
Chris Williamson b9541d6b7d Illumos 5408 - managing ZFS cache devices requires lots of RAM
5408 managing ZFS cache devices requires lots of RAM
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

Porting notes:

Due to the restructuring of the ARC-related structures, this
patch conflicts with at least the following existing ZoL commits:

    6e1d7276c9
    Fix inaccurate arcstat_l2_hdr_size calculations

        The ARC_SPACE_HDRS constant no longer exists and has been
        somewhat equivalently replaced by HDR_L2ONLY_SIZE.

    e0b0ca983d
    Add visibility in to cached dbufs

        The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr
        struct requires additional structure member names to be used
        when referencing the inner items.  Also, the presence of L1 or L2
        inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR
        macros.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-11 10:27:25 -07:00
George Wilson 2a4324141f Illumos 5369 - arc flags should be an enum
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

Porting notes:

ZoL has moved some ARC definitions into arc_impl.h.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Tim Chase <tim@chase2k.com>
2015-06-11 10:27:25 -07:00
Matthew Ahrens c3520e7f1f Illumos 5818 - zfs {ref}compressratio is incorrect with 4k sector size
5818 zfs {ref}compressratio is incorrect with 4k sector size
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Albert Lee <trisk@omniti.com>

References:
  https://www.illumos.org/issues/5818
  https://github.com/illumos/illumos-gate/commit/81cd5c5

Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3432
2015-06-10 16:24:01 -07:00
Arne Jansen 9c43027b3f Illumos 5269 - zpool import slow
5269 zpool import slow
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5269
  https://github.com/illumos/illumos-gate/commit/12380e1e

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3396
2015-06-09 13:48:02 -07:00
Turbo Fredriksson d050c627b5 Improve on the ZFS events documentation
* Add information about the 'zpool events' command in zpool(8).
* More events and payloads defined in zfs-events(5).
* I/O Stages and I/O Flags sections added.
* Remove unused legacy "zio_deadline" payload define.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3467
2015-06-09 11:19:19 -07:00
Brian Behlendorf 65037d9b25 Add libzfs_error_init() function
All fprintf() error messages are moved out of the libzfs_init()
library function where they never belonged in the first place.  A
libzfs_error_init() function is added to provide useful error
messages for the most common causes of failure.

Additionally, in libzfs_run_process() the 'rc' variable was renamed
to 'error' for consistency with the rest of the code base.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-05-22 13:34:58 -07:00
Tim Chase f467b05a26 Initialize dbu_tqent in dmu_buf_init_user()
The dbu_evict_taskq added in 0c66c32d is only invoked via
taskq_dispatch_ent(). In these cases, ZoL's implementation of taskqs
requires the entries to be initialized first with taskq_init_ent() in
order that, among other things, the embedded spinlock is initialized
properly.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3419
2015-05-18 11:39:14 -07:00
Max Grossman 5dc8b7365f Illumos 5765 - add support for estimating send stream size with lzc_send_space when source is a bookmark
5765 add support for estimating send stream size with lzc_send_space when source is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>

References:
  https://www.illumos.org/issues/5765
  https://github.com/illumos/illumos-gate/commit/643da460

Porting notes:
* Unused variable 'recordsize' in dmu_send_estimate() dropped

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3397
2015-05-13 09:03:59 -07:00
Matthew Ahrens 252e1a54ab Illumos 5810 - zdb should print details of bpobj
5810 zdb should print details of bpobj
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/5810
  https://github.com/illumos/illumos-gate/commit/732885fc

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3387
2015-05-11 15:10:24 -07:00
Tim Chase e48533383b Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 support
Commit f4af6bb783 which added support
for REQ_FAILFAST_MASK but the new autoconf test didn't use the same
preprocessor macro name as the code did.

The effect is that FAILFAST mode has not been enabled for ZoL in any
post-2.6.35 kernel.

Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels.

Raise an error condition if the FAILFAST interface can't be detected.

Signed-off-by: Tim Chase <tim@onlight.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3386
2015-05-11 15:07:00 -07:00
Matthew Ahrens f1512ee61e Illumos 5027 - zfs large block support
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5027
  https://github.com/illumos/illumos-gate/commit/b515258

Porting Notes:

* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.

* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes.  Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.

* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize.  This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.

* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX.  This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing.  Therefore, we've set DMU_MAX_ACCESS to 64M.

* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space.  We should be able to relax
this one the ABD patches are merged.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #354
2015-05-11 12:23:16 -07:00
Matthew Ahrens 63e3a8616b Illumos 5349 - verify that block pointer is plausible before reading
5349 verify that block pointer is plausible before reading
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Xin Li <delphij@FreeBSD.org>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/5349
  https://github.com/illumos/illumos-gate/commit/f63ab3d5

Porting notes:
* Several variable declarations were moved due to C style needs

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3373
2015-05-08 14:09:15 -07:00
Christopher Siden 0c60cc326b Illumos 4951 - ZFS administrative commands (fix)
4951 ZFS administrative commands should use reserved space, not fail with ENOSPC
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/4951
  https://github.com/illumos/illumos-gate/commit/c39f2c8

Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-05-04 09:41:10 -07:00
Matthew Ahrens 3d45fdd6c0 Illumos 4951 - ZFS administrative commands should use reserved space
4951 ZFS administrative commands should use reserved space, not with ENOSPC
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4373
  https://github.com/illumos/illumos-gate/commit/7d46dc6

Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-05-04 09:41:10 -07:00
Matthew Ahrens 83017311e4 Illumos 3654,3656
3654 zdb should print number of ganged blocks
3656 remove unused function zap_cursor_move_to_key()
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/3654
  https://www.illumos.org/issues/3656
  https://github.com/illumos/illumos-gate/commit/d5ee8a1

Porting Notes:

3655 and 3657 were part of this commit but those hunks were dropped
since they apply to mdb.

Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-05-04 09:41:09 -07:00
George Wilson 98b254188a Illumos #5244 - zio pipeline callers should explicitly invoke next stage
5244 zio pipeline callers should explicitly invoke next stage
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/5244
  https://github.com/illumos/illumos-gate/commit/738f37b

Porting Notes:

1. The unported "2932 support crash dumps to raidz, etc. pools"
   caused a merge conflict due to a copyright difference in
   module/zfs/vdev_raidz.c.
2. The unported "4128 disks in zpools never go away when pulled"
   and additional Linux-specific changes caused merge conflicts in
   module/zfs/vdev_disk.c.

Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2828
2015-04-30 15:07:47 -07:00
Justin T. Gibbs 6ebebaceb1 Illumos 5531 - NULL pointer dereference in dsl_prop_get_ds()
5531 NULL pointer dereference in dsl_prop_get_ds()
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5531
  https://github.com/illumos/illumos-gate/commit/e57a022

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:25:44 -07:00
Justin T. Gibbs 0c66c32d1d Illumos 5056 - ZFS deadlock on db_mtx and dn_holds
5056 ZFS deadlock on db_mtx and dn_holds
Author: Justin Gibbs <justing@spectralogic.com>
Reviewed by: Will Andrews <willa@spectralogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5056
  https://github.com/illumos/illumos-gate/commit/bc9014e

Porting Notes:

sa_handle_get_from_db():
  - the original patch includes an otherwise unmentioned fix for a
    possible usage of an uninitialised variable

dmu_objset_open_impl():
  - Under Illumos list_link_init() is the same as filling a list_node_t
    with NULLs, so they don't notice if they miss doing list_link_init()
    on a zero'd containing structure (e.g. allocated with kmem_zalloc as
    here). Under Linux, not so much: an uninitialised list_node_t goes
    "Boom!" some time later when it's used or destroyed.

dmu_objset_evict_dbufs():
  - reduce stack usage using kmem_alloc()

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:25:34 -07:00
Justin T. Gibbs d683ddbb72 Illumos 5314 - Remove "dbuf phys" db->db_data pointer aliases in ZFS
5314 Remove "dbuf phys" db->db_data pointer aliases in ZFS
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <willa@spectralogic.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5314
  https://github.com/illumos/illumos-gate/commit/c137962

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:25:20 -07:00
Alex Reece 9925c28cde Illumos 5095 - panic when adding a duplicate dbuf to dn_dbufs
5095 panic when adding a duplicate dbuf to dn_dbufs
Author: Alex Reece <alex@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Mattew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Josef Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5095
  https://github.com/illumos/illumos-gate/commit/86bb58a

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:24:49 -07:00
Justin T. Gibbs 5aea3644d6 Illumos 5038 - Remove "old-style" flexible array usage in ZFS.
5038 Remove "old-style" flexible array usage in ZFS.
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5038
  https://github.com/illumos/illumos-gate/commit/7f18da4

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:24:24 -07:00
Alex Reece 8951cb8dfb Illumos 4873 - zvol unmap calls can take a very long time for larger datasets
4873 zvol unmap calls can take a very long time for larger datasets
Author: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Basil Crow <basil.crow@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/4873
  https://github.com/illumos/illumos-gate/commit/0f6d88a

Porting Notes:

dbuf_free_range():
  - reduce stack usage using kmem_alloc()
  - the sorted AVL tree will handle the spill block case correctly
    without all the special handling in the for() loop

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:24:03 -07:00
Jerry Jelinek 788eb90c4c Illumos 3897 - zfs filesystem and snapshot limits
3897 zfs filesystem and snapshot limits
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3897
  https://github.com/illumos/illumos-gate/commit/a2afb61

Porting Notes:

dsl_dataset_snapshot_check(): reduce stack usage using kmem_alloc().

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:22:51 -07:00
Isaac Huang 0336f3d001 Remove useless variable spa_active_count
This isn't required for the Linux port because the kernel tracks
if a module is busy.  The prototype for spa_busy() is also removed
since its definition was already removed.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3262
2015-04-27 09:22:05 -07:00
Justin T. Gibbs ec8501ee12 5313 Allow I/Os to be aggregated across ZIO priority classes
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Will Andrews <willa@SpectraLogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5313
  https://github.com/illumos/illumos-gate/commit/fe319232

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3280
2015-04-24 15:16:56 -07:00
Ned Bass 4eb30c6864 Serialize access to spa->spa_feat_stats nvlist
The function spa_add_feature_stats() manipulates the shared nvlist
spa->spa_feat_stats in an unsafe concurrent manner. Add a mutex to
protect the list.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3335
2015-04-24 15:04:43 -07:00
Chunwei Chen 07012da668 Fix kernel panic due to tsd_exit in ZFS_EXIT(zsb)
The following panic would occur under certain heavy load:
[ 4692.202686] Kernel panic - not syncing: thread ffff8800c4f5dd60 terminating with rrw lock ffff8800da1b9c40 held
[ 4692.228053] CPU: 1 PID: 6250 Comm: mmap_deadlock Tainted: P           OE  3.18.10 #7

The culprit is that ZFS_EXIT(zsb) would call tsd_exit() every time, which
would purge all tsd data for the thread. However, ZFS_ENTER is designed to be
reentrant, so we cannot allow ZFS_EXIT to blindly purge tsd data.

Instead, we rely on the new behavior of tsd_set. When NULL is passed as the
new value to tsd_set, it will automatically remove the tsd entry specified the
the key for the current thread.

rrw_tsd_key and zfs_allow_log_key already calls tsd_set(key, NULL) when
they're done. The zfs_fsyncer_key relied on ZFS_EXIT(zsb) to call tsd_exit() to
do clean up. Now we explicitly call tsd_set(key, NULL) on them.

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3247
2015-04-24 14:57:54 -07:00
Tim Chase 40d06e3c78 Mark all ZPL and ioctl functions as PF_FSTRANS
Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl
calls as well as the l2arc and adapt ARC threads.

This obviates the need for MUTEX_FSTRANS so its previous uses and
definition have been eliminated.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3225
2015-04-03 11:38:59 -07:00
Prakash Surya a4069eef2e Illumos 5695 - dmu_sync'ed holes do not retain birth time
5695 dmu_sync'ed holes do not retain birth time
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5695
  https://github.com/illumos/illumos-gate/commit/70163ac

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3229
2015-03-27 14:51:34 -07:00
Ned Bass 95a6990d9a Add NULL guard in zfs_zrlock_class event class
The owner field could be NULL in some cases, so add a guard.  Shorten
__entry field names to fit assignment statements in 80 columns.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes #3220
2015-03-27 14:45:32 -07:00
Brian Behlendorf 7d90f569b3 Check all vdev labels in 'zpool import'
When using 'zpool import' to scan for available pools prefer vdev names
which reference vdevs with more valid labels.  There should be two labels
at the start of the device and two labels at the end of the device.  If
labels are missing then the device has been damaged or is in some other
way incomplete.  Preferring names with fully intact labels helps weed out
bad paths and improves the likelihood of being able to import the pool.

This behavior only applies when scanning /dev/ for valid pools.  If a
cache file exists the pools described by the cache file will be used.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Closes #3145
Closes #2844
Closes #3107
2015-03-25 14:52:52 -07:00
Chris Dunlop d07b7c7f21 Reduce size of zfs_sb_t: allocate z_hold_mtx separately
zfs_sb_t has grown to the point where using kmem_zalloc() for allocations
is triggering the 32k warning threshold.

We can't safely convert this entire allocation to use vmem_alloc() instead
of kmem_alloc() because the backing_dev_info structure is embedded here.
It depends on the bit_waitqueue() function which won't behave properly
when given a virtual address.

Instead, use vmem_alloc() to allocate the z_hold_mtx array separately.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #3178
2015-03-24 13:17:44 -07:00
Brian Behlendorf 2cbb06b561 Restructure per-filesystem reclaim
Originally when the ARC prune callback was introduced the idea was
to register a single callback for the ZPL.  The ARC could invoke this
call back if it needed the ZPL to drop dentries, inodes, or other
cache objects which might be pinning buffers in the ARC.  The ZPL
would iterate over all ZFS super blocks and perform the reclaim.

For the most part this design has worked well but due to limitations
in 2.6.35 and earlier kernels there were some problems.  This patch
is designed to address those issues.

1) iterate_supers_type() is not provided by all kernels which makes
it impossible to safely iterate over all zpl_fs_type filesystems in
a single callback.  The most straight forward and portable way to
resolve this is to register a callback per-filesystem during mount.
The arc_*_prune_callback() functions have always supported multiple
callbacks so this is functionally a very small change.

2) Commit 050d22b removed the non-portable shrink_dcache_memory()
and shrink_icache_memory() functions and didn't replace them with
equivalent functionality.  This meant that for Linux 3.1 and older
kernels the ARC had no mechanism to drop dentries and inodes from
the caches if needed.  This patch adds that missing functionality
by calling shrink_dcache_parent() to release dentries which may be
pinning inodes.  This will result in all unused cache entries being
dropped which is a bit heavy handed but it's the only interface
available for old kernels.

3) A zpl_drop_inode() callback is registered for kernels older than
2.6.35 which do not support the .evict_inode callback.  This ensures
that when the last reference on an inode is dropped it is immediately
removed from the cache.  If this isn't done than inode can end up on
the global unused LRU with no mechanism available to ZFS to drop them.
Since the ARC buffers are not dropped the hottest inodes can still
be recreated without performing disk IO.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Issue #3160
2015-03-20 10:35:20 -07:00
Justin T. Gibbs 4c7b7eedcd Illumos 5630 - stale bonus buffer in recycled dnode_t leads to data corruption
5630 stale bonus buffer in recycled dnode_t leads to data corruption
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/5630
  https://github.com/illumos/illumos-gate/commit/cd485b4

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3172
2015-03-12 15:40:39 -07:00
Ned Bass 417104bdd3 Use cached feature info in spa_add_feature_stats()
Avoid issuing I/O to the pool when retrieving feature flags information.
Trying to read the ZAPs from disk means that zpool clear would hang if
the pool is suspended and recovery would require a reboot. To keep the
feature stats resident in memory, we hang a cached nvlist off of the
spa.  It is built up from disk the first time spa_add_feature_stats() is
called, and refreshed thereafter using the cached feature reference
counts. spa_add_feature_stats() gets called at pool import time so we
can be sure the cached nvlist will be available if the pool is later
suspended.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3082
2015-03-05 14:11:10 -08:00
Brian Behlendorf 8c45def24a Linux 4.0 compat: bdi_setup_and_register()
The 'capabilities' argument which was passed to bdi_setup_and_register()
has been removed.  File systems should no longer pass BDI_CAP_MAP_COPY.
For our purposes this means there are now three different interfaces
which must be handled.  A zpl_bdi_setup_and_register() wrapper function
has been introduced to provide a single interface to the ZPL code.

* 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported.
* 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments.
* 4.0 - x.y, bdi_setup_and_register() takes 2 arguments.

I've also taken this opportunity to remove HAVE_BDI because kernels
older then 2.6.32 are no longer supported.  All kernels newer than
this will have one of the above interfaces.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes #3128
2015-03-03 10:49:45 -08:00
Brian Behlendorf 4ec15b8dcf Use MUTEX_FSTRANS mutex type
There are regions in the ZFS code where it is desirable to be able
to be set PF_FSTRANS while a specific mutex is held.  The ZFS code
could be updated to set/clear this flag in all the correct places,
but this is undesirable for a few reasons.

1) It would require changes to a significant amount of the ZFS
   code.  This would complicate applying patches from upstream.

2) It would be easy to accidentally miss a critical region in
   the initial patch or to have an future change introduce a
   new one.

Both of these concerns can be addressed by using a new mutex type
which is responsible for managing PF_FSTRANS, support for which was
added to the SPL in commit zfsonlinux/spl@9099312 - Merge branch
'kmem-rework'.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #3050
Closes #3055
Closes #3062
Closes #3132
Closes #3142
Closes #2983
2015-03-03 10:46:40 -08:00
Jörg Thalheim 534759fad3 Linux 3.19 compat: file_inode was added
struct access f->f_dentry->d_inode was replaced by accessor function
file_inode(f)

Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3084
2015-02-10 11:24:51 -08:00
Chunwei Chen 53698a453d Read spl_hostid module parameter before gethostid()
If spl_hostid is set via module parameter, it's likely different from
gethostid(). Therefore, the userspace tool should read it first before
falling back to gethostid().

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3034
2015-02-04 16:44:53 -08:00
Brian Behlendorf 81971b137a Revert "SA spill block cache"
The SA spill_cache was originally introduced to avoid the need to
perform large kmem or vmem allocations.  Instead a small dedicated
cache of preallocated SA buffers was kept.

This solution was viable while the maximum block size was limited
to 128K.  But with the planned increase of the maximum block size
to 16M callers need to migrate to the zio_buf_alloc().  However,
they should be aware this interface is expected to change again
once the zio buffers are fully backed by scatter-gather lists.

Alternately, if the callers know these buffers will never be large
or be infrequently accessed they may kmem_alloc() or vmem_alloc()
the needed temporary space.

This change has the additional benegit of bringing the code back
inline with the upstream Illumos source.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:41:28 -08:00
Brian Behlendorf 285b29d959 Revert "Pre-allocate vdev I/O buffers"
Commit 86dd0fd added preallocated I/O buffers.  This is no longer
required after the recent kmem changes designed to make our memory
allocation interfaces behave more like those found on Illumos.  A
deadlock in this situation is no longer possible.

However, these allocations still have the potential to be expensive.
So a potential future optimization might be to perform then KM_NOSLEEP
so that they either succeed of fail quicky.  Either case is acceptable
here because we can safely abort the aggregation.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:41:28 -08:00
Brian Behlendorf 60e1eda929 Add kmem_cache.h include to default context
As part of the spl kmem/vmem refactoring the kmem_cache_* functions
were split in to their own kmem_cache.h header.  This was done in
part so that kmem_* consumers would not be forced to include the
kmem_cache_* functions which mask several Linux SLAB/SLAB functions.

Because of this we now much explicitly include kmem_cache.h in the
zfs_context.h.  However, consumers such as Lustre which need access
to the KM_FLAGS but not the kmem_cache_* functions can now safely
just include kmem.h.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:41:28 -08:00
Brian Behlendorf 79c76d5b65 Change KM_PUSHPAGE -> KM_SLEEP
By marking DMU transaction processing contexts with PF_FSTRANS
we can revert the KM_PUSHPAGE -> KM_SLEEP changes.  This brings
us back in line with upstream.  In some cases this means simply
swapping the flags back.  For others fnvlist_alloc() was replaced
by nvlist_alloc(..., KM_PUSHPAGE) and must be reverted back to
fnvlist_alloc() which assumes KM_SLEEP.

The one place KM_PUSHPAGE is kept is when allocating ARC buffers
which allows us to dip in to reserved memory.  This is again the
same as upstream.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:41:26 -08:00
Brian Behlendorf efcd79a883 Retire KM_NODEBUG
Callers of kmem_alloc() which passed the KM_NODEBUG flag to suppress
the large allocation warning have been replaced by vmem_alloc() as
appropriate.  The updated vmem_alloc() call will not print a warning
regardless of the size of the allocation.

A careful reader will notice that not all callers have been changed
to vmem_alloc().  Some have only had the KM_NODEBUG flag removed.
This was possible because the default warning threshold has been
increased to 32k.  This is desirable because it minimizes the need
for Linux specific code changes.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:40:32 -08:00
Brian Behlendorf 92119cc259 Mark IO pipeline with PF_FSTRANS
In order to avoid deadlocking in the IO pipeline it is critical that
pageout be avoided during direct memory reclaim.  This ensures that
the pipeline threads can always make forward progress and never end
up blocking on a DMU transaction.  For this very reason Linux now
provides the PF_FSTRANS flag which may be set in the process context.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:28:05 -08:00
Ned Bass 49ee64e5e6 Remove duplicate typedefs from trace.h
Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate
typedef declarations with the same type. The trace.h header contains
some typedefs to avoid 'unknown type' errors for C files that haven't
declared the type in question. But this causes build failures for C
files that have already declared the type. Newer versions of GCC (e.g.
v4.6) allow duplicate typedefs with the same type unless pedantic error
checking is in force. To support the older versions we need to remove
the duplicate typedefs.

Removal of the typedefs means we can't built tracepoints code using
those types unless the required headers have been included. To
facilitate this, all tracepoint event declarations have been moved out
of trace.h into separate headers. Each new header is explicitly included
from the C file that uses the events defined therein. The trace.h header
is still indirectly included form zfs_context.h and provides the
implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces.
This makes those interfaces readily available throughout the code base.
The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also
still provided by trace.h, so it is a prerequisite for the other
trace_*.h headers.

These new Linux implementation-specific headers do introduce a small
divergence from upstream ZFS in several core C files, but this should
not present a significant maintenance burden.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2953
2015-01-06 16:53:24 -08:00
Ned Bass aaed7c408c Explicitly include SPL compat headers
Inclusion of SPL compatibility headers was moved out of the public
header sys/types.h to avoid conflicts with external packages.  Include a
few compatiblity headers explicitly to cope with that change.  Also,
sort some linux-specific inclusions alphabetically.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2898
2014-11-19 12:30:39 -05:00
Prakash Surya 0b39b9f96f Swap DTRACE_PROBE* with Linux tracepoints
This patch leverages Linux tracepoints from within the ZFS on Linux
code base. It also refactors the debug code to bring it back in sync
with Illumos.

The information exported via tracepoints can be used for a variety of
reasons (e.g. debugging, tuning, general exploration/understanding,
etc). It is advantageous to use Linux tracepoints as the mechanism to
export this kind of information (as opposed to something else) for a
number of reasons:

    * A number of external tools can make use of our tracepoints
      "automatically" (e.g. perf, systemtap)
    * Tracepoints are designed to be extremely cheap when disabled
    * It's one of the "accepted" ways to export this kind of
      information; many other kernel subsystems use tracepoints too.

Unfortunately, though, there are a few caveats as well:

    * Linux tracepoints appear to only be available to GPL licensed
      modules due to the way certain kernel functions are exported.
      Thus, to actually make use of the tracepoints introduced by this
      patch, one might have to patch and re-compile the kernel;
      exporting the necessary functions to non-GPL modules.

    * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux
      tracepoints are not available for unsigned kernel modules
      (tracepoints will get disabled due to the module's 'F' taint).
      Thus, one either has to sign the zfs kernel module prior to
      loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or
      newer.

Assuming the above two requirements are satisfied, lets look at an
example of how this patch can be used and what information it exposes
(all commands run as 'root'):

    # list all zfs tracepoints available

    $ ls /sys/kernel/debug/tracing/events/zfs
    enable              filter              zfs_arc__delete
    zfs_arc__evict      zfs_arc__hit        zfs_arc__miss
    zfs_l2arc__evict    zfs_l2arc__hit      zfs_l2arc__iodone
    zfs_l2arc__miss     zfs_l2arc__read     zfs_l2arc__write
    zfs_new_state__mfu  zfs_new_state__mru

    # enable all zfs tracepoints, clear the tracepoint ring buffer

    $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable
    $ echo 0 > /sys/kernel/debug/tracing/trace

    # import zpool called 'tank', inspect tracepoint data (each line was
    # truncated, they're too long for a commit message otherwise)

    $ zpool import tank
    $ cat /sys/kernel/debug/tracing/trace | head -n35
    # tracer: nop
    #
    # entries-in-buffer/entries-written: 1219/1219   #P:8
    #
    #                              _-----=> irqs-off
    #                             / _----=> need-resched
    #                            | / _---=> hardirq/softirq
    #                            || / _--=> preempt-depth
    #                            ||| /     delay
    #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
    #              | |       |   ||||       |         |
            lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr...
          z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr...
          z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr...
          z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr...
          z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr...
          z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr...
          z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru...
            lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr...
          z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru...
            lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ...

To highlight the kind of detailed information that is being exported
using this infrastructure, I've taken the first tracepoint line from the
output above and reformatted it such that it fits in 80 columns:

    lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss:
        hdr {
            dva 0x1:0x40082
            birth 15491
            cksum0 0x163edbff3a
            flags 0x640
            datacnt 1
            type 1
            size 2048
            spa 3133524293419867460
            state_type 0
            access 0
            mru_hits 0
            mru_ghost_hits 0
            mfu_hits 0
            mfu_ghost_hits 0
            l2_hits 0
            refcount 1
        } bp {
            dva0 0x1:0x40082
            dva1 0x1:0x3000e5
            dva2 0x1:0x5a006e
            cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00
            lsize 2048
        } zb {
            objset 0
            object 0
            level -1
            blkid 0
        }

For the specific tracepoint shown here, 'zfs_arc__miss', data is
exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and
zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!).
This kind of precise and detailed information can be extremely valuable
when trying to answer certain kinds of questions.

For anybody unfamiliar but looking to build on this, I found the XFS
source code along with the following three web links to be extremely
helpful:

    * http://lwn.net/Articles/379903/
    * http://lwn.net/Articles/381064/
    * http://lwn.net/Articles/383362/

I should also node the more "boring" aspects of this patch:

    * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to
       support a sixth paramter. This parameter is used to populate the
       contents of the new conftest.h file. If no sixth parameter is
       provided, conftest.h will be empty.

    * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced.
      This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro,
      except it has support for a fifth option that is then passed as
      the sixth parameter to ZFS_LINUX_COMPILE_IFELSE.

These autoconf changes were needed to test the availability of the Linux
tracepoint macros. Due to the odd nature of the Linux tracepoint macro
API, a separate ".h" must be created (the path and filename is used
internally by the kernel's define_trace.h file).

    * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This
      is to determine if we can safely enable the Linux tracepoint
      functionality. We need to selectively disable the tracepoint code
      due to the kernel exporting certain functions as GPL only. Without
      this check, the build process will fail at link time.

In addition, the SET_ERROR macro was modified into a tracepoint as well.
To do this, the 'sdt.h' file was moved into the 'include/sys' directory
and now contains a userspace portion and a kernel space portion. The
dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as
well.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-11-17 11:13:55 -08:00
Ned Bass 59ec819a0c Move a few internal ARC strucutres to arc_impl.h
Add a new file named arc_impl.h and move a few internal
ARC structure definitions into this file. This is
needed in order to allow the Linux tracepoint functions to grub
around in the internals of these structures.

Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-11-17 11:13:27 -08:00
Prakash Surya fb42a49328 Illumos 5213 - panic in metaslab_init due to space_map_open returning ENXIO
5213 panic in metaslab_init due to space_map_open returning ENXIO
Reviewed by: Matthew Ahrens mahrens@delphix.com
Reviewed by: George Wilson george.wilson@delphix.com

References:
  https://www.illumos.org/issues/5213
  https://reviews.csiden.org/r/110

Porting notes:

For the Linux port, KM_SLEEP was replaced with KM_PUSHPAGE.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2745
2014-11-14 15:37:45 -08:00
Chris Wedgwood b31d8ea77c Reduce buf/dbuf mutex contention
Due to evidence of contention both the buf_hash_table and the
dbuf_hash_table sizes have been increased from 256 to 8192.

This increase in hash table size adds approximating 0.5M to
our fixed memory footprint.  This relatively small increase
is not expected to cause problems even on low memory machines.
This footprint will also become dynamic when the persistent
L2ARC support is finalized.  In the meanwhile, this small
change significantly reduces contention for certain workloads.

Signed-off-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes #1291
2014-11-14 14:59:21 -08:00
Alex Zhuravlev 0f69910833 Export symbols for ZIL interface
These symbols are needed by consumers (i.e. Lustre) who wish to
integrate with the ZIL.  In addition the zil_rollback_destroy()
prototype was removed because the implementation of this function
was removed long ago.

Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2892
2014-11-14 14:39:43 -08:00
Richard Yao 3cd33ffc3b Kernel header installation should respect --prefix
This is the upstream component of work that enables preliminary support
for building Gentoo's ZFS packaging on other Linux systems via Gentoo
Prefix.

Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
2014-10-28 09:37:06 -07:00
Matthew Ahrens 9635861742 Illumos 5164-5165 - space map fixes
5164 space_map_max_blksz causes panic, does not work
5165 zdb fails assertion when run on pool with recently-enabled
     space map_histogram feature
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5164
  https://www.illumos.org/issues/5165
  https://github.com/illumos/illumos-gate/commit/b1be289

Porting Notes:

The metaslab_fragmentation() hunk was dropped from this patch
because it was already resolved by commit 8b0a084.

The comment modified in metaslab.c was updated to use the correct
variable name, space_map_blksz.  The upstream commit incorrectly
used space_map_blksize.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2697
2014-10-23 15:30:32 -07:00
Alex Reece b02fe35d37 Illumos 4958 zdb trips assert on pools with ashift >= 0xe
4958 zdb trips assert on pools with ashift >= 0xe
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4958
  https://github.com/illumos/illumos-gate/commit/2a104a5

Porting notes:

Keep the ZIO_FLAG_FASTWRITE define.  This is for a feature present
in Linux but not yet in *BSD.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2697
2014-10-23 15:30:32 -07:00
Brian Behlendorf 5f6d0b6f5a Handle block pointers with a corrupt logical size
The general strategy used by ZFS to verify that blocks are valid is
to checksum everything.  This has the advantage of being extremely
robust and generically applicable regardless of the contents of
the block.  If a blocks checksum is valid then its contents are
trusted by the higher layers.

This system works exceptionally well as long as bad data is never
written with a valid checksum.  If this does somehow occur due to
a software bug or a memory bit-flip on a non-ECC system it may
result in kernel panic.

One such place where this could occur is if somehow the logical
size stored in a block pointer exceeds the maximum block size.
This will result in an attempt to allocate a buffer greater than
the maximum block size causing a system panic.

To prevent this from happening the arc_read() function has been
updated to detect this specific case.  If a block pointer with an
invalid logical size is passed it will treat the block as if it
contained a checksum error.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2678
2014-10-23 09:20:52 -07:00
Matthew Ahrens 6c59307a3c Illumos 3693 - restore_object uses at least two transactions to restore an object
Restore_object should not use two transactions to restore an object:
  * one transaction is used for dmu_object_claim
  * another transaction is used to set compression, checksum and most
    importantly bonus data
  * furthermore dmu_object_reclaim internally uses multiple transactions
  * dmu_free_long_range frees chunks in separate transactions
  * dnode_reallocate is executed in a distinct transaction

The fact the dnode_allocate/dnode_reallocate are executed in one
transaction and bonus (re-)population is executed in a different
transaction may lead to violation of ZFS consistency assertions if the
transactions are assigned to different transaction groups.  Also, if
the first transaction group is successfully written to a permanent
storage, but the second transaction is lost, then an invalid dnode may
be created on the stable storage.

3693 restore_object uses at least two transactions to restore an object
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andriy Gapon <andriy.gapon@hybridcluster.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Original authors: Matthew Ahrens and Andriy Gapon

References:
  https://www.illumos.org/issues/3693
  https://github.com/illumos/illumos-gate/commit/e77d42e

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2689
2014-10-21 15:26:50 -07:00
Brian Behlendorf f0e324f25d Update utsname support
Modify the code to use the utsname() kernel function rather than
a global variable.  This results is cleaner more portable code
because utsname() is already provided by the kernel and can be
easily emulated in user space via uname(2).  This means that it
will behave consistently in both contexts.

This is also has the benefit that it allows the removal of a few
_KERNEL pre-processor conditions.  And it also is a pre-requisite
for a proper FUSE port because we need to provide a valid utsname.

Finally, it allows us to remove this functionality from the SPL
and all the related compatibility code.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
2014-10-17 14:58:57 -07:00
Brian Behlendorf 60bba62814 Update code to use misc_register()/misc_deregister()
When ZPIOS was originally written it was designed to use the
device_create() and device_destroy() functions.  Unfortunately,
these functions changed considerably over the years making them
difficult to rely on.

As it turns out a better choice would have been to use the
misc_register()/misc_deregister() functions.  This interface
for registering character devices has remained stable, is simple,
and provides everything we need.

Therefore the code has been reworked to use this interface.  The
higher level ZFS code has always depended on these same interfaces
so this is also as a step towards minimizing our kernel dependencies.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
2014-10-17 14:58:44 -07:00
Matthew Ahrens e022864d19 Illumos 5176 - lock contention on godfather zio
5176 lock contention on godfather zio
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Bayard Bell <Bayard.Bell@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/5176
  https://github.com/illumos/illumos-gate/commit/6f834bc

Porting notes:

Under Linux max_ncpus is defined as num_possible_cpus().  This is
largest number of cpu ids which might be available during the life
time of the system boot.  This value can be larger than the number
of present cpus if CONFIG_HOTPLUG_CPU is defined.

Ported by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2711
2014-10-07 11:24:24 -07:00
Richard Yao 83e9986f6e Implement -t option to zpool create for temporary pool names
Creating virtual machines that have their rootfs on ZFS on hosts that
have their rootfs on ZFS causes SPA namespace collisions when the
standard name rpool is used. The solution is either to give each guest
pool a name unique to the host, which is not always desireable, or boot
a VM environment containing an ISO image to install it, which is
cumbersome.

26b42f3f9d introduced `zpool import -t
...` to simplify situations where a host must access a guest's pool when
there is a SPA namespace conflict. We build upon that to introduce
`zpool import -t tname ...`. That allows us to create a pool whose
in-core name is tname, but whose on-disk name is the normal name
specified.

This simplifies the creation of machine images that use a rootfs on ZFS.
That benefits not only real world deployments, but also ZFSOnLinux
development by decreasing the time needed to perform rootfs on ZFS
experiments.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
2014-09-30 10:46:59 -07:00
Brian Behlendorf aa0ac7caa4 Make user stack limit configurable
To aid in detecting and debugging stack overflow issues make the
user space stack limit configurable via a new ZFS_STACK_SIZE
environment variable.  The value assigned to ZFS_STACK_SIZE will
be used as the default stack size in bytes.

Because this is mainly useful as a debugging aid in conjunction
with ztest the stack limit is disabled by default.  See the ztest(1)
man page for additional details on using the ZFS_STACK_SIZE
environment variable.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #2743
Issue #2293
2014-09-30 10:46:55 -07:00
Alex Reece acbad6ff67 Illumos 4753 - increase number of outstanding async writes when sync task is waiting
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
    https://www.illumos.org/issues/4753
    https://github.com/illumos/illumos-gate/commit/73527f4

Comments by Matt Ahrens from the issue tracker:
    When a sync task is waiting for a txg to complete, we should hurry
    it along by increasing the number of outstanding async writes
    (i.e. make vdev_queue_max_async_writes() return a larger number).
    Initially we might just have a tunable for "minimum async writes
    while a synctask is waiting" and set it to 3.

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2716
2014-09-23 13:50:55 -07:00
Tim Chase 223df0161f Implement fallocate FALLOC_FL_PUNCH_HOLE
Add support for the FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE mode of
fallocate(2).  Mimic the behavior of other native file systems such as
ext4 in cases where the file might be extended. If the offset is beyond
the end of the file, return success without changing the file. If the
extent of the punched hole would extend the file, only the existing tail
of the file is punched.

Add the zfs_zero_partial_page() function, modeled after update_page(),
to handle zeroing partial pages in a hole-punching operation.  It must
be used under a range lock for the requested region in order that the
ARC and page cache stay in sync.

Move the existing page cache truncation via truncate_setsize() into
zfs_freesp() for better source structure compatibility with upstream code.

Add page cache truncation to zfs_freesp() and zfs_free_range() to handle
hole punching.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #2619
2014-09-08 13:52:25 -07:00
Richard Yao cd3939c5f0 Linux AIO Support
nfsd uses do_readv_writev() to implement fops->read and fops->write.
do_readv_writev() will attempt to read/write using fops->aio_read and
fops->aio_write, but it will fallback to fops->read and fops->write when
AIO is not available. However, the fallback will perform a call for each
individual data page. Since our default recordsize is 128KB, sequential
operations on NFS will generate 32 DMU transactions where only 1
transaction was needed. That was unnecessary overhead and we implement
fops->aio_read and fops->aio_write to eliminate it.

ZFS originated in OpenSolaris, where the AIO API is entirely implemented
in userland's libc by intelligently mapping them to VOP_WRITE, VOP_READ
and VOP_FSYNC.  Linux implements AIO inside the kernel itself. Linux
filesystems therefore must implement their own AIO logic and nearly all
of them implement fops->aio_write synchronously. Consequently, they do
not implement aio_fsync(). However, since the ZPL works by mapping
Linux's VFS calls to the functions implementing Illumos' VFS operations,
we instead implement AIO in the kernel by mapping the operations to the
VOP_READ, VOP_WRITE and VOP_FSYNC equivalents. We therefore implement
fops->aio_fsync.

One might be inclined to make our fops->aio_write implementation
synchronous to make software that expects this behavior safe. However,
there are several reasons not to do this:

1. Other platforms do not implement aio_write() synchronously and since
the majority of userland software using AIO should be cross platform,
expectations of synchronous behavior should not be a problem.

2. We would hurt the performance of programs that use POSIX interfaces
properly while simultaneously encouraging the creation of more
non-compliant software.

3. The broader community concluded that userland software should be
patched to properly use POSIX interfaces instead of implementing hacks
in filesystems to cater to broken software. This concept is best
described as the O_PONIES debate.

4. Making an asynchronous write synchronous is non sequitur.

Any software dependent on synchronous aio_write behavior will suffer
data loss on ZFSOnLinux in a kernel panic / system failure of at most
zfs_txg_timeout seconds, which by default is 5 seconds. This seems like
a reasonable consequence of using non-compliant software.

It should be noted that this is also a problem in the kernel itself
where nfsd does not pass O_SYNC on files opened with it and instead
relies on a open()/write()/close() to enforce synchronous behavior when
the flush is only guarenteed on last close.

Exporting any filesystem that does not implement AIO via NFS risks data
loss in the event of a kernel panic / system failure when something else
is also accessing the file. Exporting any file system that implements
AIO the way this patch does bears similar risk. However, it seems
reasonable to forgo crippling our AIO implementation in favor of
developing patches to fix this problem in Linux's nfsd for the reasons
stated earlier. In the interim, the risk will remain. Failing to
implement AIO will not change the problem that nfsd created, so there is
no reason for nfsd's mistake to block our implementation of AIO.

It also should be noted that `aio_cancel()` will always return
`AIO_NOTCANCELED` under this implementation. It is possible to implement
aio_cancel by deferring work to taskqs and use `kiocb_set_cancel_fn()`
to set a callback function for cancelling work sent to taskqs, but the
simpler approach is allowed by the specification:

```
Which operations are cancelable is implementation-defined.
```

http://pubs.opengroup.org/onlinepubs/009695399/functions/aio_cancel.html

The only programs on my system that are capable of using `aio_cancel()`
are QEMU, beecrypt and fio use it according to a recursive grep of my
system's `/usr/src/debug`. That suggests that `aio_cancel()` users are
rare. Implementing aio_cancel() is left to a future date when it is
clear that there are consumers that benefit from its implementation to
justify the work.

Lastly, it is important to know that handling of the iovec updates differs
between Illumos and Linux in the implementation of read/write. On Linux,
it is the VFS' responsibility whle on Illumos, it is the filesystem's
responsibility.  We take the intermediate solution of copying the iovec
so that the ZFS code can update it like on Solaris while leaving the
originals alone. This imposes some overhead. We could always revisit
this should profiling show that the allocations are a problem.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #223
Closes #2373
2014-09-05 15:11:43 -07:00
Isaac Huang 0426c16804 Fixed memory leaks in zevent handling
Some nvlist_t could be leaked in error handling paths.
Also make sure cb argument to zfs_zevent_post() cannnot
be NULL.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2158
2014-08-20 10:45:16 -07:00
Matthew Ahrens bd089c5477 Illumos 4631 - zvol_get_stats triggering too many reads
4631 zvol_get_stats triggering too many reads

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4631
  https://github.com/illumos/illumos-gate/commit/bbfa8ea

Ported-by: Boris Protopopov <bprotopopov@hotmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2612
Closes #2480
2014-08-20 09:17:00 -07:00
George Wilson f3a7f6610f Illumos 4976-4984 - metaslab improvements
4976 zfs should only avoid writing to a failing non-redundant top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature is enabled
4983 need to collect metaslab information via mdb
4984 device selection should use fragmentation metric
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4976
  https://www.illumos.org/issues/4978
  https://www.illumos.org/issues/4979
  https://www.illumos.org/issues/4980
  https://www.illumos.org/issues/4981
  https://www.illumos.org/issues/4982
  https://www.illumos.org/issues/4983
  https://www.illumos.org/issues/4984
  https://github.com/illumos/illumos-gate/commit/2e4c998

Notes:
    The "zdb -M" option has been re-tasked to display the new metaslab
    fragmentation metric and the new "zdb -I" option is used to control
    the maximum number of in-flight I/Os.

    The new fragmentation metric is derived from the space map histogram
    which has been rolled up to the vdev and pool level and is presented
    to the user via "zpool list".

    Add a number of module parameters related to the new metaslab weighting
    logic.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2595
2014-08-18 08:40:49 -07:00
Turbo Fredriksson f67d709080 Create an 'overlay' property
Add a new 'overlay' property (default 'off') that controls whether the
filesystem should be mounted even if the mountpoint is busy or if it
should fail with a 'mountpoint not empty'.

Doing overlay mounts is the default mount behavior on Linux, but not
in ZFS. It have been decided that following the ZFS behavior should
be the default, but this overlay allows for site administrator to
override this decision on a per-dataset basis.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2503
2014-08-15 13:39:19 -07:00
Richard Yao 194e56234a Include sys/taskq.h in linux/vfs_compat.h
We should have included sys/taskq.h directly because we use the taskq
code here, but we instead had files that included sys/taskq.h also
include sys/kmem.h, which happened to include sys/taskq.h. sys/kmem.h no
longer does this, so we must define the include as we should
have done in the first place.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2411
2014-08-14 12:38:17 -07:00
Alec Salazar 22a11a5b5a Replace __va_list with va_list
Most of the code base already uses va_list, which is specified by
iso-c. gcc/glibc provides 'typedef __gnuc_va_list va_list'. and
when not using gcc/glibc we can't expect to find __gnuc_va_list.

Signed-off-by: Alec Salazar <alec.j.salazar@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2588
2014-08-13 10:35:00 -07:00
Brian Behlendorf 0a50679ce9 Add zfs_iput_async() interface
Handle all iputs in zfs_purgedir() and zfs_inode_destroy()
asynchronously to prevent deadlocks.  When the iputs are allowed
to run synchronously in the destroy call path deadlocks between
xattr directory inodes and their parent file inodes are possible.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #457
2014-08-11 16:11:43 -07:00
Brian Behlendorf 50b25b2187 Avoid dynamic allocation of 'search zio'
As part of commit e8b96c6 the search zio used by the
vdev_queue_io_to_issue() function was moved to the heap
to minimize stack usage.  Functionally this is fine, but
to maximize performance it's best to minimize the number
of dynamic allocations.

To avoid this allocation temporary space for the search
zio has been reserved in the vdev_queue structure.  All
access must be serialized through the vq_lock.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #2572
2014-08-11 08:44:54 -07:00
Matthew Ahrens 5dbd68a352 Illumos 4914 - zfs on-disk bookmark structure should be named *_phys_t
4914 zfs on-disk bookmark structure should be named *_phys_t

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://www.illumos.org/issues/4914
  https://github.com/illumos/illumos-gate/commit/7802d7b

Porting notes:

There were a number of zfsonlinux-specific uses of zbookmark_t which
needed to be updated.  This should reduce the likelihood of further
problems like issue #2094 from occurring.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2558
2014-08-06 14:48:41 -07:00
Matthew Ahrens fbeddd60b7 Illumos 4390 - I/O errors can corrupt space map when deleting fs/vol
4390 i/o errors when deleting filesystem/zvol can lead to space map corruption
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4390
  https://github.com/illumos/illumos-gate/commit/7fd05ac

Porting notes:

Previous stack-reduction efforts in traverse_visitb() caused a fair
number of un-mergable pieces of code.  This patch should reduce its
stack footprint a bit more.

The new local bptree_entry_phys_t in bptree_add() is dynamically-allocated
using kmem_zalloc() for the purpose of stack reduction.

The new global zfs_free_leak_on_eio has been defined as an integer
rather than a boolean_t as was the case with the related zfs_recover
global.  Also, zfs_free_leak_on_eio's definition has been inserted into
zfs_debug.c for consistency with the existing definition of zfs_recover.
Illumos placed it in spa_misc.c.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2545
2014-08-04 11:50:52 -07:00
Matthew Ahrens 9b67f60560 Illumos 4757, 4913
4757 ZFS embedded-data block pointers ("zero block compression")
4913 zfs release should not be subject to space checks

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4757
  https://www.illumos.org/issues/4913
  https://github.com/illumos/illumos-gate/commit/5d7b4d4

Porting notes:

For compatibility with the fastpath code the zio_done() function
needed to be updated.  Because embedded-data block pointers do
not require DVAs to be allocated the associated vdevs will not
be marked and therefore should not be unmarked.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2544
2014-08-01 14:28:05 -07:00
Matthew Ahrens faf0f58c69 Illumos 3835 zfs need not store 2 copies of all metadata
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

Description from Matt Ahrens's bug report at Delphix:

    Add a new zfs property, "redundant_metadata" which can have values
    "all" or "most".  The default will be "all", which is the current
    behavior.  Setting to "most" will cause us to only store 1 copy of
    level-1 indirect blocks of user data files.

Additional notes:

    The new man page section for this property states

        "The exact behavior of which metadata blocks
         are stored redundantly may change in future releases."

    and:

        "When set to most, ZFS stores an extra copy of most types of
         metadata. This can improve performance of random writes,
         because less metadata must be written."

    The current implementation is as described above in Matt's blog.
    It is controlled by a new global integer
    "zfs_redundant_metadata_most_ditto_level", currently initialized
    to 2. When "redundant_metadata" is set to "most", only indirect
    blocks of the specified level and higher will have additional ditto
    blocks created.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2542
2014-07-31 09:49:34 -07:00
George Wilson 672692c7b7 Illumos 4754, 4755
4754 io issued to near-full luns even after setting noalloc threshold
4755 mg_alloc_failures is no longer needed

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4754
  https://www.illumos.org/issues/4755
  https://github.com/illumos/illumos-gate/commit/b6240e8

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2533
2014-07-30 10:30:05 -07:00
Matthew Ahrens 9bd274ddd8 Illumos #4374
4374 dn_free_ranges should use range_tree_t

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4374
  https://github.com/illumos/illumos-gate/commit/bf16b11

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2531
2014-07-30 09:20:35 -07:00
Matthew Ahrens da536844d5 Illumos 4368, 4369.
4369 implement zfs bookmarks
4368 zfs send filesystems from readonly pools
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4369
  https://www.illumos.org/issues/4368
  https://github.com/illumos/illumos-gate/commit/78f1710

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2530
2014-07-29 10:55:29 -07:00
Max Grossman b0bc7a84d9 Illumos 4370, 4371
4370 avoid transmitting holes during zfs send
4371 DMU code clean up

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Garrett D'Amore <garrett@damore.org>a

References:
  https://www.illumos.org/issues/4370
  https://www.illumos.org/issues/4371
  https://github.com/illumos/illumos-gate/commit/43466aa

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2529
2014-07-28 14:29:58 -07:00
Matthew Ahrens fa86b5dbb6 Illumos 4171, 4172
4171 clean up spa_feature_*() interfaces
4172 implement extensible_dataset feature for use by other zpool features

Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Approved by: Garrett D'Amore <garrett@damore.org>a

References:
  https://www.illumos.org/issues/4171
  https://www.illumos.org/issues/4172
  https://github.com/illumos/illumos-gate/commit/2acef22

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2528
2014-07-25 16:40:07 -07:00
Jan Engelhardt aca19e063b Do not attempt access beyond the declared end of the dn_blkptr array
This loop in dmu_objset_write_ready():

	for (i = 0; i < dnp->dn_nblkptr; i++)
		bp->blk_fill += dnp->dn_blkptr[i].blk_fill;

invokes _undefined behavior_ for the (common) case of dn_nblkptr=3,
therefore, the compiler is free to do whatever it wants (such as
optimizing it away, or otherwise messing up your expections).

The fix is to be honest about the array size.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2511
Closes #2010
2014-07-22 09:55:37 -07:00
George Wilson 93cf20764a Illumos #4101, #4102, #4103, #4105, #4106
4101 metaslab_debug should allow for fine-grained control
4102 space_maps should store more information about themselves
4103 space map object blocksize should be increased
4105 removing a mirrored log device results in a leaked object
4106 asynchronously load metaslab
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <seb@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

Prior to this patch, space_maps were preferred solely based on the
amount of free space left in each. Unfortunately, this heuristic didn't
contain any information about the make-up of that free space, which
meant we could keep preferring and loading a highly fragmented space map
that wouldn't actually have enough contiguous space to satisfy the
allocation; then unloading that space_map and repeating the process.

This change modifies the space_map's to store additional information
about the contiguous space in the space_map, so that we can use this
information to make a better decision about which space_map to load.
This requires reallocating all space_map objects to increase their
bonus buffer size sizes enough to fit the new metadata.

The above feature can be enabled via a new feature flag introduced by
this change: com.delphix:spacemap_histogram

In addition to the above, this patch allows the space_map block size to
be increase. Currently the block size is set to be 4K in size, which has
certain implications including the following:

    * 4K sector devices will not see any compression benefit
    * large space_maps require more metadata on-disk
    * large space_maps require more time to load (typically random reads)

Now the space_map block size can adjust as needed up to the maximum size
set via the space_map_max_blksz variable.

A bug was fixed which resulted in potentially leaking an object when
removing a mirrored log device. The previous logic for vdev_remove() did
not deal with removing top-level vdevs that are interior vdevs (i.e.
mirror) correctly. The problem would occur when removing a mirrored log
device, and result in the DTL space map object being leaked; because
top-level vdevs don't have DTL space map objects associated with them.

References:
  https://www.illumos.org/issues/4101
  https://www.illumos.org/issues/4102
  https://www.illumos.org/issues/4103
  https://www.illumos.org/issues/4105
  https://www.illumos.org/issues/4106
  https://github.com/illumos/illumos-gate/commit/0713e23

Porting notes:

A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also,
the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary.

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2488
2014-07-22 09:39:16 -07:00
Brian Behlendorf 1e8db77102 Fix zil_commit() NULL dereference
Update the current code to ensure inodes are never dirtied if they are
part of a read-only file system or snapshot.  If they do somehow get
dirtied an attempt will make made to write them to disk.  In the case
of snapshots, which don't have a ZIL, this will result in a NULL
dereference in zil_commit().

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2405
2014-07-17 15:15:07 -07:00
Chris Wedgwood 62a05896e8 Allow building without ACLs
Some kernel definitions were buried inside the #if... #endif logic for
ACLs.  When ACLs are not available these definitions get lost causing
the build to fail.

Signed-off-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2349
2014-05-30 12:01:57 -07:00
Tim Chase 3937ab20f3 Allow for lock-free reading zfsdev_state_list.
Restructure the zfsdev_state_list to allow for lock-free reading by
converting to a simple singly-linked list from which items are never
deleted and over which only forward iterations are performed.  It depends
on, among other things, the atomicity of accessing the zs_minor integer
and zs_next pointer.

This fixes a lock inversion in which the zfsdev_state_lock is used by
both the sync task (txg_sync) and indirectly by any user program which
uses /dev/zfs; the zfsdev_release method uses the same lock and then
blocks on the sync task.

The most typical failure scenerio occurs when the sync task is cleaning
up a user hold while various concurrent "zfs" commands are in progress.

Neither Illumos nor Solaris are affected by this issue because they use
DDI interface which provides lock-free reading of device state via the
ddi_get_soft_state() function.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2301
2014-05-19 11:45:11 -07:00
Chunwei Chen bc25c9325b Use a dedicated taskq for vdev_file
Originally, vdev_file used system_taskq. This would cause a deadlock,
especially on system with few CPUs. The reason is that the prefetcher
threads, which are on system_taskq, will sometimes be blocked waiting
for I/O to finish. If the prefetcher threads consume all the tasks in
system_taskq, the I/O cannot be served and thus results in a deadlock.

We fix this by creating a dedicated vdev_file_taskq for vdev_file I/O.

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2270
2014-05-14 16:20:21 -07:00
Tim Chase 962d524212 Check the dataset type more rigorously when fetching properties.
When fetching property values of snapshots, a check against the head
dataset type must be performed.  Previously, this additional check was
performed only when fetching "version", "normalize", "utf8only" or "case".

This caused the ZPL properties "acltype", "exec", "devices", "nbmand",
"setuid" and "xattr" to be erroneously displayed with meaningless values
for snapshots of volumes.  It also did not allow for the display of
"volsize" of a snapshot of a volume.

This patch adds the headcheck flag paramater to zfs_prop_valid_for_type()
and zprop_valid_for_type() to indicate the check is being done
against a head dataset's type in order that properties valid only for
snapshots are handled correctly.  This allows the the head check in
get_numeric_property() to be performed when fetching a property for
a snapshot.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2265
2014-05-06 10:41:46 -07:00
Richard Yao 3af3df905f libspl: Implement LWP rwlock interface
This implements a subset of the LWP rwlock interface by wrapping the
equivalent POSIX thread interface. It is a superset of the features
needed by ztest.

The missing bits are {,_}rw_read_held() and {,_}rw_write_held().

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1970
2014-05-01 15:53:52 -07:00
Richard Yao 9d317793aa Implement File Attribute Support
We add support for lsattr and chattr to resolve a regression caused
by 88c283952f that broke Python's
xattr.list(). That changet broke Gentoo Portage's FEATURES=xattr,
which depended on Python's xattr.list().

Only attributes common to both Solaris and Linux are supported. These
are 'a', 'd' and 'i' in Linux's lsattr and chattr commands. File
attributes exclusive to Solaris are present in the ZFS code, but cannot
be accessed or modified through this method.  That was the case prior to
this patch. The resolution of issue zfsonlinux/zfs#229 should implement
some method to permit access and modification of Solaris-specific
attributes.

References:
  https://bugs.gentoo.org/show_bug.cgi?id=483516

Original-patch-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1691
2014-05-01 10:11:18 -07:00
Chunwei Chen 0b75bdb369 Use ddi_time_after and friends to compare time
Also, make sure we use clock_t for ddi_get_lbolt to prevent type conversion
from screwing things.

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2142
2014-04-14 13:27:56 -07:00
Chunwei Chen b761912b34 Linux 3.14 compat: rq_for_each_segment in dmu_req_copy
rq_for_each_segment changed from taking bio_vec * to taking bio_vec.
We provide rq_for_each_segment4 which takes both.

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
2014-04-10 14:28:51 -07:00
Chunwei Chen d4541210f3 Linux 3.14 compat: Immutable biovec changes in vdev_disk.c
bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter.
This patch creates BIO_BI_*(bio) macros to hide the differences.

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
2014-04-10 14:28:38 -07:00
Chunwei Chen 408ec0d2e1 Linux 3.14 compat: posix_acl_{create,chmod}
posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod}

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
2014-04-10 14:27:03 -07:00
Brian Behlendorf 904ea2763e Add automatic hot spare functionality
When a vdev starts getting I/O or checksum errors it is now
possible to automatically rebuild to a hot spare device.

To cleanly support this functionality in a shell script some
additional information was added to all zevent ereports which
include a vdev.  This covers both io and checksum zevents but
may be used but other scripts.

In the Illumos FMA solution the same information is required
but it is retrieved through the libzfs library interface.
Specifically the following members were added:

  vdev_spare_paths  - List of vdev paths for all hot spares.
  vdev_spare_guids  - List of vdev guids for all hot spares.
  vdev_read_errors  - Read errors for the problematic vdev
  vdev_write_errors - Write errors for the problematic vdev
  vdev_cksum_errors - Checksum errors for the problematic vdev.

By default the required hot spare scripts are installed but this
functionality is disabled.  To enable hot sparing uncomment the
ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the
/etc/zfs/zed.d/zed.rc configuration file.

These scripts do no add support for the autoexpand property. At
a minimum this requires adding a new udev rule to detect when
a new device is added to the system.  It also requires that the
autoexpand policy be ported from Illumos, see:

  https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c

Support for detecting the correct name of a vdev when it's not
a whole disk was added by Turbo Fredriksson.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #2
2014-04-02 13:10:08 -07:00
Chris Dunlap 8c7aa0cfc4 Replace zpool_events_next() "block" parm w/ "flags"
zpool_events_next() can be called in blocking mode by specifying a
non-zero value for the "block" parameter.  However, the design of
the ZFS Event Daemon (zed) requires additional functionality from
zpool_events_next().  Instead of adding additional arguments to the
function, it makes more sense to use flags that can be bitwise-or'd
together.

This commit replaces the zpool_events_next() int "block" parameter with
an unsigned bitwise "flags" parameter.  It also defines ZEVENT_NONE
to specify the default behavior.  Since non-blocking mode can be
specified with the existing ZEVENT_NONBLOCK flag, the default behavior
becomes blocking mode.  This, in effect, inverts the previous use
of the "block" parameter.  Existing callers of zpool_events_next()
have been modified to check for the ZEVENT_NONBLOCK flag.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
2014-03-31 16:11:21 -07:00
Brian Behlendorf 75e3ff58fe Add zpool_events_seek() functionality
The ZFS_IOC_EVENTS_SEEK ioctl was added to allow user space callers
to seek around the zevent file descriptor by EID.  When a specific
EID is passed and it exists the cursor will be positioned there.
If the EID is no longer cached by the kernel ENOENT is returned.
The caller may also pass ZEVENT_SEEK_START or ZEVENT_SEEK_END to seek
to those respective locations.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
2014-03-31 16:10:57 -07:00
Brian Behlendorf a2f1945ee3 Add a unique "eid" value to all zevents
Tagging each zevent with a unique monotonically increasing EID
(Event IDentifier) provides the required infrastructure for a user
space daemon to reliably process zevents.  By writing the EID to
persistent storage the daemon can safely resume where it left off
in the event stream when it's restarted.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
2014-03-31 16:10:41 -07:00
Richard Yao 26b42f3f9d Implement -t option to zpool import for temporary pool names
Originally, users had to handle spa namespace collisions by either
exporting the already imported pool or by specifying a new name for the
pool with a conflicting name. In the case of root pools from virtual
guests, neither approach to collision resolution is reasonable. This is
addressed by extending the new name syntax with a -t option to specify
that the new name is temporary. When specified, this sets an internal
flag that is passed into the kernel to tell it that all label updates
should refer to the name used in the original label. Consequently, the
original pool name will be retained on export.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2189
2014-03-20 12:05:30 -07:00
Ned Bass 3ccab25205 replace nreserved with ndirty in txgs kstat
The nreserved column in the txgs kstat file always contains 0
following the write throttle restructuring of commit
e8b96c6007.

Prior to that commit, the nreserved column showed the number of bytes
temporarily reserved in the pool by a transaction group at sync time.
The new write throttle did away with temporary reservations and uses
the amount of dirty data instead.  To approximate the old output of
the txgs kstat, the number of dirty bytes per-txg was passed in as
the nreserved value to spa_txg_history_set_io().  This approach did
not work as intended, because the per-txg dirty value is decremented
as data is written out to disk, so it is zero by the time we call
spa_txg_history_set_io().  To fix this, save the number of dirty
bytes before calling spa_sync(), and pass this value in to
spa_txg_history_set_io().

Also, since the name "nreserved" is now a misnomer, the column
heading is now labeled "ndirty".

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1696
2014-03-04 12:22:24 -08:00
Ned Bass 3d920a1567 dmu_tx kstat cleanup
A few counters in the dmu_tx kstats are obsolete or no longer
bumped properly.

- The sync task restructuring commit
  13fe019870 removed the code
  that bumpted dmu_tx_quota. The counter is now bumped in two
  cases, instead of just the one case as before (after the result
  of dsl_dataset_check_quota call). The second case is where
  we check the requested reservation against the actual pool size,
  as this is an implicit quota of sorts.

- The write throttle restructuring commit
  e8b96c6007 makes dmu_tx_how and
  dmu_tx_inflight obsolete, so they are removed.

Signed-off-by: Kohsuke Kawaguchi <kk@kohsuke.org>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1914
2014-03-04 12:22:24 -08:00
Prakash Surya cc7f677c16 Split "data_size" into "meta" and "data"
Previously, the "data_size" field in the arcstats kstat contained the
amount of cached "metadata" and "data" in the ARC. The problem is this
then made it difficult to extract out just the "metadata" size, or just
the "data" size.

To make it easier to distinguish the two values, "data_size" has been
modified to count only buffers of type ARC_BUFC_DATA, and "meta_size"
was added to count only buffers of type ARC_BUFC_METADATA. If one wants
the old "data_size" value, simply sum the new "data_size" and
"meta_size" values.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya 94520ca462 Prune metadata from ghost lists in arc_adjust_meta
To maintain a strict limit on the metadata contained in the arc, while
preventing the arc buffer headers from completely consuming the
"arc_meta_used" space, we need to evict metadata buffers from the arc's
ghost lists along with the regular lists.

This change modifies arc_adjust_meta such that it more closely models
the adjustments made in arc_adjust. "arc_meta_used" is used similarly to
"arc_size", and "arc_meta_limit" is used similarly to "arc_c".

Testing metadata intensive workloads (e.g. creating, copying, and
removing millions of small files and/or directories) has shown this
change to make a dramatic improvement to the hit rate maintained in the
arc. While I think there is still room for improvement, this is a big
step in the right direction.

In addition, zpl_free_cached_objects was made into a no-op as I'm not
yet sure how to properly implement that function.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Richard Yao 4f2dcb3eee Add erratum for issue #2094
ZoL commit 1421c89 unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit.  Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.

The additional field has been removed by the previous commit.  However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied.  This will return the pools to a state in which they
may be imported by other implementations.

The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted.  A message similar to one of the following means your
pool must be scrubbed to restore compatibility.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #1 detected.
 action: The pool can be imported using its name or numeric identifier,
         however there is a compatibility issue which should be corrected
         by running 'zpool scrub'
    see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

$ zpool status
  pool: zol-0.6.2-173
 state: ONLINE
  scan: pool compatibility issue detected.
   see: https://github.com/zfsonlinux/zfs/issues/2094
action: To correct the issue run 'zpool scrub'.
config:
...

If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported.  Further advice on how to proceed will be
provided by the error message as follows.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #2 detected.
 action: The pool can not be imported with this version of ZFS due to an
         active asynchronous destroy.  Revert to an earlier version and
         allow the destroy to complete before updating.
         see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:

zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w

Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.

The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys.  Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.

This patch does have one limitation that should be mentioned.  It will not
detect errata #2 on a pool unless errata #1 is also present.  It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.

End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL.  The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root.  This will display a non-zero
value for any pool with an active asynchronous destroy.

Lastly, it is expected that no user data has been lost as a result of
this erratum.

Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
2014-02-21 12:10:40 -08:00
Brian Behlendorf ffe9d38275 Add generic errata infrastructure
From time to time it may be necessary to inform the pool administrator
about an errata which impacts their pool.  These errata will by shown
to the administrator through the 'zpool status' and 'zpool import'
output as appropriate.  The errata must clearly describe the issue
detected, how the pool is impacted, and what action should be taken
to resolve the situation.  Additional information for each errata will
be provided at http://zfsonlinux.org/msg/ZFS-8000-ER.

To accomplish the above this patch adds the required infrastructure to
allow the kernel modules to notify the utilities that an errata has
been detected.  This is done through the ZPOOL_CONFIG_ERRATA uint64_t
which has been added to the pool configuration nvlist.

To add a new errata the following changes must be made:

* A new errata identifier must be assigned by adding a new enum value
  to the zpool_errata_t type.  New enums must be added to the end to
  preserve the existing ordering.

* Code must be added to detect the issue.  This does not strictly
  need to be done at pool import time but doing so will make the
  errata visible in 'zpool import' as well as 'zpool status'.  Once
  detected the spa->spa_errata member should be set to the new enum.

* If possible code should be added to clear the spa->spa_errata member
  once the errata has been resolved.

* The show_import() and status_callback() functions must be updated
  to include an informational message describing the errata.  This
  should include an action message describing what an administrator
  should do to address the errata.

* The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be
  updated to describe the errata.  This space can be used to provide
  as much additional information as needed to fully describe the errata.
  A link to this documentation will be automatically generated in the
  output of 'zpool import' and 'zpool status'.

Original-idea-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
2014-02-21 12:10:40 -08:00
Richard Yao ed9e8368d3 Revert changes to zbookmark_t
Commit 1421c89142 added a field to
zbookmark_t that unintentinoally caused a disk format change. This
negatively affected backward compatibility and platform portability.
Therefore, this field is being removed.

The function that field permitted is left unimplemented until a later
patch that will reimplement the field in a way that does not affect the
disk format.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
2014-02-21 12:10:39 -08:00
Tim Chase 6d111134c0 Implement relatime.
Add the "relatime" property.  When set to "on", a file's atime will only
be updated if the existing atime at least a day old or if the existing
ctime or mtime has been updated since the last access.  This behavior
is compatible with the Linux "relatime" mount option.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2064
Closes #1917
2014-01-29 15:50:44 -08:00
Cyril Plisko 01b738f457 Call gethrtime() only once per new txg creation
When transitioning current open TXG into QUIESCE state and opening
a new one txg_quiesce() calls gethrtime():
  - to mark the birth time of the new TXG
  - to record the SPA txg history kstat
  - implicitely inside spa_txg_history_add()

These timestamps are practically the same, so that the first one
can be used instead of the other two.  The only visible difference
is that inside spa_txg_history_add() the time spent in kmem_zalloc()
will be counted towards the opened TXG.

Since at this point the new TXG already exists (tx->tx_open_txg
has been already incremented) it is actually a correct accounting.

In any case this extra work is only happening when spa_txg_history
kstat is activated (i.e. zfs_txg_history > 0) and doesn't affect
the normal processing in any way.

Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Issue #2075
2014-01-23 13:31:51 -08:00
Igor Lvovsky 478d64fdae Add additional state TXG_STATE_WAIT_FOR_SYNC for txg.
In several cases when digging into kstats we can found two txgs
in SYNC state, e.g.

txg     birth            state  nreserved  nread      nwritten ...
985452  258127184872561  C      0          373948416  2376272384 ...
985453  258129016180616  C      0          378173440  28793344 ...
985454  258129016271523  S      0          0          0 ...
985455  258130864245986  S      0          0          0 ...
985456  258130867458851  O      0          0          0 ...

However only first txg (985454) is really syncing at this moment.
The other one (985455) marked as SYNCED is actually in a post-QUIESCED
state and waiting to start sync.   So, the new TXG_STATE_WAIT_FOR_SYNC
state between TXG_STATE_QUIESCED and TXG_STATE_SYNCED was added to
reveal this situation.

txg     birth            state  nreserved  nread      nwritten ...
1086896 235261068743969  C      0          163577856  8437248 ...
1086897 235262870830801  C      0          280625152  822594048 ...
1086898 235264172219064  S      0          0          0 ...
1086899 235264936134407  W      0          0          0 ...
1086900 235264936296156  O      0          0          0 ...

Signed-off-by: Igor Lvovsky <ilvovsky@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2075
2014-01-23 13:31:51 -08:00
Brian Behlendorf 7f89ae6ba0 Use local variable to read zp->z_mode
When accessing the zp->z_mode through the SA bulk interface we
expect that 64-bits are available to hold the result.  However,
on 32-bit platforms mode_t will only be 32-bits so we cannot
pass it to SA_ADD_BULK_ATTR().  Instead a local uint64_t variable
must be used and the result assigned to zp->z_mode.

This went unnoticed on 32-bit little endian platforms because
the bytes happen to end up in the correct 32-bits.  But on big
endian platforms like Sparc the zp->z_mode will always end up
set to zero.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: marku89 <mar42@kola.li>
Issue #1700
2014-01-09 15:50:11 -08:00
John Layman ecf3d9b8e6 Add ddt, ddt_entry, and l2arc_hdr caches
Back the allocations for ddt tables+entries and l2arc headers with
kmem caches.  This will reduce the cost of allocating these commonly
used structures and allow for greater visibility of them through the
/proc/spl/kmem/slab interface.

Signed-off-by: John Layman <jlayman@sagecloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1893
2014-01-07 10:33:11 -08:00
Matthew Thode 11b9ec23b9 Add full SELinux support
Four new dataset properties have been added to support SELinux.  They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8).  When one of
these properties is set to something other than 'none'.  That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.

For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:

  $ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media

This will ensure the filesystem is automatically mounted with that
rootcontext.  It is equivalent to manually specifying the rootcontext
with the -o option like this:

  $ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media

By default all four contexts are set to 'none'.  Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #1504
2013-12-19 10:37:31 -08:00
Michael Kjorling d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1821
2013-12-18 16:46:35 -08:00
Brian Behlendorf 2e0358cbca Sync /dev/zfs ioctl ordering
In order to minimize any future disruption caused by the addition
and removal /dev/zfs ioctls this patch makes the following changes.

1) Sync ZoL's ioctl ordering such that it matches Illumos.  For
   historic reasons the ZFS_IOC_DESTROY_SNAPS and ZFS_IOC_POOL_REGUID
   ioctls were out of order.

2) Move Linux and FreeBSD specific ioctls in to their own reserved
   ranges.  This allows us to preserve the existing ordering when
   new ioctls are added by either Illumos or FreeBSD.  When an
   ioctl is no longer needed it should be retired in place.

This change alters the ZFS user/kernel ABI so make sure you rebuild
both your user and kernel modules.  However, it should allow for a
much stabler interface going forward.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #1973
2013-12-16 09:41:39 -08:00
Brian Behlendorf ba6a24026c Remove ZFC_IOC_*_MINOR ioctl()s
Early versions of ZFS coordinated the creation and destruction
of device minors from userspace.  This was inherently racy and
in late 2009 these ioctl()s were removed leaving everything up
to the kernel.  This significantly simplified the code.

However, we never picked up these changes in ZoL since we'd
already significantly adjusted this code for Linux.  This patch
aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s
and moving all the functionality down in to the kernel.  Since
this cleanup will change the kernel/user ABI it's being done
in the same tag as the previous libzfs_core ABI changes.  This
will minimize, but not eliminate, the disruption to end users.

Once merged ZoL, Illumos, and FreeBSD will basically be back
in sync in regards to handling ZVOLs in the common code.  While
each platform must have its own custom zvol.c implemenation the
interfaces provided are consistent.

NOTES:

1) This patch introduces one subtle change in behavior which
   could not be easily avoided.  Prior to this change callers
   of 'zfs create -V ...' were guaranteed that upon exit the
   /dev/zvol/ block device link would be created or an error
   returned.  That's no longer the case.  The utilities will no
   longer block waiting for the symlink to be created.  Callers
   are now responsible for blocking, this is why a 'udev_wait'
   call was added to the 'label' function in scripts/common.sh.

2) The read-only behavior of a ZVOL now solely depends on if
   the ZVOL_RDONLY bit is set in zv->zv_flags.  The redundant
   policy setting in the gendisk structure was removed.  This
   both simplifies the code and allows us to safely leverage
   set_disk_ro() to issue a KOBJ_CHANGE uevent.  See the
   comment in the code for futher details on this.

3) Because __zvol_create_minor() and zvol_alloc() may now be
   called in a sync task they must use KM_PUSHPAGE.

References:
  illumos/illumos-gate@681d9761e8

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #1969
2013-12-16 09:15:57 -08:00
Shen Yan 5cb65efe2c Fix zstream_t incorrect type
The DMU zfetch code organizes streams with lists not avl trees.  A
avl_node_t was mistakenly used for a list_node_t in the zstream_t
type.  This is incorrect (but harmless) and when unnoticed because:

1) The list functions explicitly cast the value preventing a warning,
2) sizeof(avl_node_t) >= sizeof(list_node_t) so no overrun occurs, and
3) The calculated offset is the same regardless of the type.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1946
2013-12-10 10:09:27 -08:00