Commit Graph

4416 Commits

Author SHA1 Message Date
Alexander Motin 3b8f227362 ZIL: Remove TX_CLONE_RANGE replay for ZVOLs.
zil_claim_clone_range() takes references on cloned blocks before ZIL
replay.  Later zil_free_clone_range() drops them after replay or on
dataset destroy.  The total balance is neutral.  It means we do not
need to do anything (drop the references) for not implemented yet
TX_CLONE_RANGE replay for ZVOLs.

This is a logical follow up to #15603.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15612
2024-01-08 16:11:39 -08:00
Alexander Motin e48195c816 ZIO: Add overflow checks for linear buffers
Since we use a limited set of kmem caches, quite often we have unused
memory after the end of the buffer.  Put there up to a 512-byte canary
when built with debug to detect buffer overflows at the free time.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15553
2024-01-08 16:11:39 -08:00
Alexander Motin ad47eca195 ZIL: Assert record sizes in different places
This should make sure we have log written without overflows.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15517
2024-01-08 16:11:39 -08:00
Alexander Motin 2e259c6f00 L2ARC: Restrict write size to 1/4 of the device
PR #15457 exposed weird logic in L2ARC write sizing. If it appeared
bigger than device size, instead of liming write it reset all the
system-wide tunables to their default.  Aside of being excessive,
it did not actually help with the problem, still allowing infinite
loop to happen.

This patch removes the tunables reverting logic, but instead limits
L2ARC writes (or at least eviction/trim) to 1/4 of the capacity.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15519
2024-01-08 16:11:39 -08:00
Alexander Motin a8c29a79df Linux: Reclaim unused spl_kmem_cache_reclaim
It is unused for 3 years since #10576.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15507
2024-01-08 16:11:39 -08:00
Alexander Motin f13593619b FreeBSD: Optimize large kstat outputs
- Use sbuf_new_for_sysctl() to reduce double-buffering on sysctl
output.
- Use much faster sbuf_cat() instead of sbuf_printf("%s").

Together it reduces `sysctl kstat.zfs.misc.dbufs` time from minutes
to seconds, making dbufstat almost usable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15495
2024-01-08 16:11:39 -08:00
Alan Somers c34fe8dcbc Update the kstat dataset_name when renaming a zvol
Add a dataset_kstats_rename function, and call it when renaming
a zvol on FreeBSD and Linux.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes #15482
Closes #15486
2024-01-08 16:11:39 -08:00
Alexander Motin 2a59b6bfa9 ABD: Be more assertive in iterators
Once we verified the ABDs and asserted the sizes we should never
see premature ABDs ends.  Assert that and remove extra branches
from production builds.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15428
2024-01-08 16:11:39 -08:00
Rob Norris db2db50e37 spa: make read/write queues configurable
We are finding that as customers get larger and faster machines
(hundreds of cores, large NVMe-backed pools) they keep hitting
relatively low performance ceilings. Our profiling work almost always
finds that they're running into bottlenecks on the SPA IO taskqs.
Unfortunately there's often little we can advise at that point, because
there's very few ways to change behaviour without patching.

This commit adds two load-time parameters `zio_taskq_read` and
`zio_taskq_write` that can configure the READ and WRITE IO taskqs
directly.

This achieves two goals: it gives operators (and those that support
them) a way to tune things without requiring a custom build of OpenZFS,
which is often not possible, and it lets us easily try different config
variations in a variety of environments to inform the development of
better defaults for these kind of systems.

Because tuning the IO taskqs really requires a fairly deep understanding
of how IO in ZFS works, and generally isn't needed without a pretty
serious workload and an ability to identify bottlenecks, only minimal
documentation is provided. Its expected that anyone using this is going
to have the source code there as well.

Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
2023-12-22 13:25:07 -08:00
Brian Behlendorf d530d5d8a5 Linux 6.5 compat: check BLK_OPEN_EXCL is defined
On some systems we already have blkdev_get_by_path() with 4 args
but still the old FMODE_EXCL and not BLK_OPEN_EXCL defined.
The vdev_bdev_mode() function was added to handle this case
but there was no generic way to specify exclusive access.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #15692
2023-12-21 16:19:48 -08:00
Rob Norris 03b84099d9 linux 6.7 compat: rework shrinker setup for heap allocations
6.7 changes the shrinker API such that shrinkers must be allocated
dynamically by the kernel. To accomodate this, this commit reworks
spl_register_shrinker() to do something similar against earlier kernels.

Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://github.com/sponsors/robn
2023-12-21 11:03:08 -08:00
Rob Norris 18a9185165 linux 6.7 compat: handle superblock shrinker member change
In 6.7 the superblock shrinker member s_shrink has changed from being an
embedded struct to a pointer. Detect this, and don't take a reference if
it already is one.

Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://github.com/sponsors/robn
2023-12-21 11:03:08 -08:00
Rob Norris 3c13601a12 linux 6.7 compat: use inode atime/mtime accessors
6.6 made i_ctime inaccessible; 6.7 has done the same for i_atime and
i_mtime. This extends the method used for ctime in b37f29341 to atime
and mtime as well.

Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://github.com/sponsors/robn
2023-12-21 11:03:08 -08:00
rmacklem 522414da3b FreeBSD: Fix ZFS so that snapshots under .zfs/snapshot are NFS visible
Call vfs_exjail_clone() for mounts created under .zfs/snapshot
to fill in the mnt_exjail field for the mount.  If this is not
done, the snapshots under .zfs/snapshot with not be accessible
over NFS.

This version has the argument name in vfs.h fixed to match that
of the name in spl_vfs.c, although it really does not matter.

External-issue: https://reviews.freebsd.org/D42672
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes #15563
2023-11-29 14:08:46 -08:00
Alexander Motin a8c256046b ZIL: Call brt_pending_add() replaying TX_CLONE_RANGE
zil_claim_clone_range() takes references on cloned blocks before ZIL
replay.  Later zil_free_clone_range() drops them after replay or on
dataset destroy.  The total balance is neutral.  It means on actual
replay we must take additional references, which would stay in BRT.

Without this blocks could be freed prematurely when either original
file or its clone are destroyed.  I've observed BRT being emptied
and the feature being deactivated after ZIL replay completion, which
should not have happened.  With the patch I see expected stats.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15603
2023-11-29 13:08:25 -08:00
Alan Somers 349fb77f11 FreeBSD: Fix the build on FreeBSD 12
It was broken for several reasons:
* VOP_UNLOCK lost an argument in 13.0.  So OpenZFS should be using
  VOP_UNLOCK1, but a few direct calls to VOP_UNLOCK snuck in.
* The location of the zlib header moved in 13.0 and 12.1.  We can drop
  support for building on 12.0, which is EoL.
* knlist_init lost an argument in 13.0.  OpenZFS change 9d0887402b
  assumed 13.0 or later.
* FreeBSD 13.0 added copy_file_range, and OpenZFS change 67a1b03791
  assumed 13.0 or later.

Sponsored-by: Axcient
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes #15551
2023-11-28 15:19:07 -08:00
Rob N 2a953e0ac9 dmu_buf_will_clone: fix race in transition back to NOFILL
Previously, dmu_buf_will_clone() would roll back any dirty record, but
would not clean out the modified data nor reset the state before
releasing the lock. That leaves the last-written data in db_data, but
the dbuf in the wrong state.

This is eventually corrected when the dbuf state is made NOFILL, and
dbuf_noread() called (which clears out the old data), but at this point
its too late, because the lock was already dropped with that invalid
state.

Any caller acquiring the lock before the call into
dmu_buf_will_not_fill() can find what appears to be a clean, readable
buffer, and would take the wrong state from it: it should be getting the
data from the cloned block, not from earlier (unwritten) dirty data.

Even after the state was switched to NOFILL, the old data was still not
cleaned out until dbuf_noread(), which is another gap for a caller to
take the lock and read the wrong data.

This commit fixes all this by properly cleaning up the previous state
and then setting the new state before dropping the lock. The
DBUF_VERIFY() calls confirm that the dbuf is in a valid state when the
lock is down.

Sponsored-by: Klara, Inc.
Sponsored-By: OpenDrives Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #15566
Closes #15526
2023-11-28 12:59:00 -08:00
Rob Norris d702f86eaf brt: lift internal definitions into _impl header
So that zdb (and others!) can get at the BRT on-disk structures.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #15541
2023-11-28 12:56:43 -08:00
Alexander Motin 56a2a0981e ZIL: Do not encrypt block pointers in lr_clone_range_t
In case of crash cloned blocks need to be claimed on pool import.
It is only possible if they (lr_bps) and their count (lr_nbps) are
not encrypted but only authenticated, similar to block pointer in
lr_write_t.  Few other fields can be and are still encrypted.

This should fix panic on ZIL claim after crash when block cloning
is actively used.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tom Caputi <caputit1@tcnj.edu>
Reviewed-by: Sean Eric Fagan <sef@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Edmund Nadolski <edmund.nadolski@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15543
Closes #15513
2023-11-28 11:17:52 -08:00
Rob N 9b9b09f452
dnode_is_dirty: check dnode and its data for dirtiness
Over its history this the dirty dnode test has been changed between
checking for a dnodes being on `os_dirty_dnodes` (`dn_dirty_link`) and
`dn_dirty_record`.

  de198f2d9 Fix lseek(SEEK_DATA/SEEK_HOLE) mmap consistency
  2531ce372 Revert "Report holes when there are only metadata changes"
  ec4f9b8f3 Report holes when there are only metadata changes
  454365bba Fix dirty check in dmu_offset_next()
  66aca2473 SEEK_HOLE should not block on txg_wait_synced()

Also illumos/illumos-gate@c543ec060d illumos/illumos-gate@2bcf0248e9

It turns out both are actually required.

In the case of appending data to a newly created file, the dnode proper
is dirtied (at least to change the blocksize) and dirty records are
added.  Thus, a single logical operation is represented by separate
dirty indicators, and must not be separated.

The incorrect dirty check becomes a problem when the first block of a
file is being appended to while another process is calling lseek to skip
holes. There is a small window where the dnode part is undirtied while
there are still dirty records. In this case, `lseek(fd, 0, SEEK_DATA)`
would not know that the file is dirty, and would go to
`dnode_next_offset()`. Since the object has no data blocks yet, it
returns `ESRCH`, indicating no data found, which results in `ENXIO`
being returned to `lseek()`'s caller.

Since coreutils 9.2, `cp` performs sparse copies by default, that is, it
uses `SEEK_DATA` and `SEEK_HOLE` against the source file and attempts to
replicate the holes in the target. When it hits the bug, its initial
search for data fails, and it goes on to call `fallocate()` to create a
hole over the entire destination file.

This has come up more recently as users upgrade their systems, getting
OpenZFS 2.2 as well as a newer coreutils. However, this problem has been
reproduced against 2.1, as well as on FreeBSD 13 and 14.

This change simply updates the dirty check to check both types of dirty.
If there's anything dirty at all, we immediately go to the "wait for
sync" stage, It doesn't really matter after that; both changes are on
disk, so the dirty fields should be correct.

Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #15571
Closes #15526
2023-11-28 09:15:48 -08:00
Brian Behlendorf 89fcb8c6f9 Revert "Tune zio buffer caches and their alignments"
This reverts commit bd7a02c251 which
can trigger an unlikely existing bio alignment issue on Linux.
This change is good, but the underlying issue it exposes needs to
be resolved before this can be re-applied.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #15533
2023-11-28 09:03:58 -08:00
Tony Hutter 479dca51c6 zfs-2.2.1: Disable block cloning by default
Disable block cloning by default to mitigate possible data corruption
(see #15529 and #15526).

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
2023-11-16 14:23:03 -08:00
Rich Ercolani 87e9e82865 Add a tunable to disable BRT support.
Copy the disable parameter that FreeBSD implemented, and extend it to
work on Linux as well, until we're sure this is stable.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #15529
2023-11-16 14:23:03 -08:00
Tony Hutter e92a680c70 Workaround UBSAN errors for variable arrays
This gets around UBSAN errors when using arrays at the end of
structs.  It converts some zero-length arrays to variable length
arrays and disables UBSAN checking on certain modules.

It is based off of the patch from #15460.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Co-authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #15145
Closes #15510
2023-11-16 14:23:03 -08:00
Low-power f2fe4d51a8 Linux: reject read/write mapping to immutable file only on VM_SHARED
Private read/write mapping can't be used to modify the mapped files, so
they will remain be immutable. Private read/write mappings are usually
used to load the data segment of executable files, rejecting them will
rendering immutable executable files to stop working.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: WHR <msl0000023508@gmail.com>
Closes #15344
2023-11-16 14:23:03 -08:00
MigeljanImeri 76663fe372 Fix accounting error for pending sync IO ops in zpool iostat
Currently vdev_queue_class_length is responsible for checking how long
the queue length is, however, it doesn't check the length when a list
is used, rather it just returns whether it is empty or not. To fix this
I added a counter variable to vdev_queue_class to keep track of the sync
IO ops, and changed vdev_queue_class_length to reference this variable
instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: MigeljanImeri <ImeriMigel@gmail.com>
Closes #15478
2023-11-16 14:23:03 -08:00
Umer Saleem 44c8ff9b0c Linux 6.6 compat: fix implicit conversion error with debug build
With Linux v6.6.0 and GCC 12, when debug build is configured,
implicit conversion error is raised while converting
'enum <anonymous>' to 'boolean_t'. Use 'B_TRUE' instead of
'true' to fix the issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #15489
2023-11-16 14:23:03 -08:00
Alexander Motin 3ec4ea68d4 Unify arc_prune_async() code
There is no sense to have separate implementations for FreeBSD and
Linux.  Make Linux code shared as more functional and just register
FreeBSD-specific prune callback with arc_add_prune_callback() API.

Aside of code cleanup this should fix excessive pruning on FreeBSD:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=274698

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15456
2023-11-08 12:15:41 -08:00
Alexander Motin bd7a02c251 Tune zio buffer caches and their alignments
We should not always use PAGESIZE alignment for caches bigger than
it and SPA_MINBLOCKSIZE otherwise.  Doing that caches for 5, 6, 7,
10 and 14KB rounded up to 8, 12 and 16KB respectively make no sense.
Instead specify as alignment the biggest power-of-2 divisor.  This
way 2KB and 6KB caches are both aligned to 2KB, while 4KB and 8KB
are aligned to 4KB.

Reduce number of caches to half-power of 2 instead of quarter-power
of 2.  This removes caches difficult for underlying allocators to
fit into page-granular slabs, such as: 2.5, 3.5, 5, 7, 10KB, etc.
Since these caches are mostly used for transient allocations like
ZIOs and small DBUF cache it does not worth being too aggressive.
Due to the above alignment issue some of those caches were not
working properly any way.  6KB cache now finally has a chance to
work right, placing 2 buffers into 3 pages, that makes sense.

Remove explicit alignment in Linux user-space case.  I don't think
it should be needed any more with the above fixes.

As result on FreeBSD instead of such numbers of pages per slab:

vm.uma.zio_buf_comb_16384.keg.ppera: 4
vm.uma.zio_buf_comb_14336.keg.ppera: 4
vm.uma.zio_buf_comb_12288.keg.ppera: 3
vm.uma.zio_buf_comb_10240.keg.ppera: 3
vm.uma.zio_buf_comb_8192.keg.ppera: 2
vm.uma.zio_buf_comb_7168.keg.ppera: 2
vm.uma.zio_buf_comb_6144.keg.ppera: 2   <= Broken
vm.uma.zio_buf_comb_5120.keg.ppera: 2
vm.uma.zio_buf_comb_4096.keg.ppera: 1
vm.uma.zio_buf_comb_3584.keg.ppera: 7   <= Hard to free
vm.uma.zio_buf_comb_3072.keg.ppera: 3
vm.uma.zio_buf_comb_2560.keg.ppera: 2
vm.uma.zio_buf_comb_2048.keg.ppera: 1
vm.uma.zio_buf_comb_1536.keg.ppera: 2
vm.uma.zio_buf_comb_1024.keg.ppera: 1
vm.uma.zio_buf_comb_512.keg.ppera: 1

I am now getting such:

vm.uma.zio_buf_comb_16384.keg.ppera: 4
vm.uma.zio_buf_comb_12288.keg.ppera: 3
vm.uma.zio_buf_comb_8192.keg.ppera: 2
vm.uma.zio_buf_comb_6144.keg.ppera: 3   <= Fixed, 2 in 3 pages
vm.uma.zio_buf_comb_4096.keg.ppera: 1
vm.uma.zio_buf_comb_3072.keg.ppera: 3
vm.uma.zio_buf_comb_2048.keg.ppera: 1
vm.uma.zio_buf_comb_1536.keg.ppera: 2
vm.uma.zio_buf_comb_1024.keg.ppera: 1
vm.uma.zio_buf_comb_512.keg.ppera: 1

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15452
2023-11-08 12:15:41 -08:00
Alexander Motin e82e68400a DMU: Do not pre-read holes during write
dmu_tx_check_ioerr() pre-reads blocks that are going to be dirtied
as part of transaction to both prefetch them and check for errors.
But it makes no sense to do it for holes, since there are no disk
reads to prefetch and there can be no errors.  On the other side
those blocks are anonymous, and they are freed immediately by the
dbuf_rele() without even being put into dbuf cache, so we just
burn CPU time on decompression and overheads and get absolutely
no result at the end.

Use of dbuf_hold_impl() with fail_sparse parameter allows to skip
the extra work, and on my tests with sequential 8KB writes to empty
ZVOL with 32KB blocks shows throughput increase from 1.7 to 2GB/s.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15371
2023-11-08 12:15:41 -08:00
Coleman Kane 3f67e012e4 Linux 6.6 compat: fsync_bdev() has been removed in favor of sync_blockdev()
In Linux commit 560e20e4bf6484a0c12f9f3c7a1aa55056948e1e, the
fsync_bdev() function was removed in favor of sync_blockdev() to do
(roughly) the same thing, given the same input. This change
conditionally attempts to call sync_blockdev() if fsync_bdev() isn't
discovered during configure.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15263
2023-11-08 12:15:41 -08:00
Coleman Kane 21875dd090 Linux 6.6 compat: generic_fillattr has a new u32 request_mask added at arg2
In commit 0d72b92883c651a11059d93335f33d65c6eb653b, a new u32 argument
for the request_mask was added to generic_fillattr. This is the same
request_mask for statx that's present in the most recent API implemented
by zpl_getattr_impl. This commit conditionally adds it to the
zpl_generic_fillattr(...) macro, as well as the zfs_getattr_fast(...)
implementation, when configure determines it's present in the kernel's
generic_fillattr(...).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15263
2023-11-08 12:15:41 -08:00
Coleman Kane fe9d409e90 Linux 6.6 compat: use inode_get/set_ctime*(...)
In Linux commit 13bc24457850583a2e7203ded05b7209ab4bc5ef, direct access
to the i_ctime member of struct inode was removed. The new approach is
to use accessor methods that exclusively handle passing the timestamp
around by value. This change adds new tests for each of these functions
and introduces zpl_* equivalents in include/os/linux/zfs/sys/zpl.h. In
where the inode_get/set_ctime*() functions exist, these zpl_* calls will
be mapped to the new functions. On older kernels, these macros just wrap
direct-access calls. The code that operated on an address of ip->i_ctime
to call ZFS_TIME_DECODE() now will take a local copy using
zpl_inode_get_ctime(), and then pass the address of the local copy when
performing the ZFS_TIME_DECODE() call, in all cases, rather than
directly accessing the member.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15263
Closes #15257
2023-11-08 12:15:41 -08:00
shodanshok 7aef672b77 Read prefetched buffers from L2ARC
Prefetched buffers are currently read from L2ARC if, and only if,
l2arc_noprefetch is set to non-default value of 0. This means that
a streaming read which can be served from L2ARC will instead engage
the main pool.

For example, consider what happens when a file is sequentially read:
- application requests contiguous data, engaging the prefetcher;
- ARC buffers are initially marked as prefetched but, as the calling
application consumes data, the prefetch tag is cleared;
- these "normal" buffers become eligible for L2ARC and are copied to it;
- re-reading the same file will *not* engage L2ARC even if it contains
the required buffers;
- main pool has to suffer another sequential read load, which (due to
most NCQ-enabled HDDs preferring sequential loads) can dramatically
increase latency for uncached random reads.

In other words, current behavior is to write data to L2ARC (wearing it)
without using the very same cache when reading back the same data. This
was probably useful many years ago to preserve L2ARC read bandwidth but,
with current SSD speed/size/price, it is vastly sub-optimal.

Setting l2arc_noprefetch=1, while enabling L2ARC to serve these reads,
means that even prefetched but unused buffers will be copied into L2ARC,
further increasing wear and load for potentially not-useful data.

This patch enable prefetched buffer to be read from L2ARC even when
l2arc_noprefetch=1 (default), increasing sequential read speed and
reducing load on the main pool without polluting L2ARC with not-useful
(ie: unused) prefetched data. Moreover, it clear users confusion about
L2ARC size increasing but not serving any IO when doing sequential
reads.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes #15451
2023-11-06 16:47:51 -08:00
Thomas Bertschinger f9a9aea126 Add mutex_enter_interruptible() for interruptible sleeping IOCTLs
Many long-running ZFS ioctls lock the spa_namespace_lock, forcing
concurrent ioctls to sleep for the mutex. Previously, the only
option is to call mutex_enter() which sleeps uninterruptibly. This
is a usability issue for sysadmins, for example, if the admin runs
`zpool status` while a slow `zpool import` is ongoing, the admin's
shell will be locked in uninterruptible sleep for a long time.

This patch resolves this admin usability issue by introducing
mutex_enter_interruptible() which sleeps interruptibly while waiting
to acquire a lock. It is implemented for both Linux and FreeBSD.

The ZFS_IOC_POOL_CONFIGS ioctl, used by `zpool status`, is changed to
use this new macro so that the command can be interrupted if it is
issued during a concurrent `zpool import` (or other long-running
operation).

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Thomas Bertschinger <bertschinger@lanl.gov>
Closes #15360
2023-11-06 16:47:41 -08:00
Tony Hutter 8ba748d414 Revert "zvol: Temporally disable blk-mq"
This reverts commit aefb6a2bd6.

aefb6a2bd temporally disabled blk-mq until we could fix a fix for

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15439
2023-11-06 16:47:32 -08:00
Tony Hutter e860cb0200 zvol: Remove broken blk-mq optimization
This fix removes a dubious optimization in zfs_uiomove_bvec_rq()
that saved the iterator contents of a rq_for_each_segment().  This
optimization allowed restoring the "saved state" from a previous
rq_for_each_segment() call on the same uio so that you wouldn't
need to iterate though each bvec on every zfs_uiomove_bvec_rq() call.
However, if the kernel is manipulating the requests/bios/bvecs under
the covers between zfs_uiomove_bvec_rq() calls, then it could result
in corruption from using the "saved state".  This optimization
results in an unbootable system after installing an OS on a zvol
with blk-mq enabled.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15351
2023-11-06 16:47:24 -08:00
Alexander Motin 6e41aca519 Trust ARC_BUF_SHARED() more
In my understanding ARC_BUF_SHARED() and arc_buf_is_shared() should
return identical results, except the second also asserts it deeper.
The first is much cheaper though, saving few pointer dereferences.
Replace production arc_buf_is_shared() calls with ARC_BUF_SHARED(),
and call arc_buf_is_shared() in random assertions, while making it
even more strict.

On my tests this in half reduces arc_buf_destroy_impl() time, that
noticeably reduces hash_lock congestion under heavy dbuf eviction.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15397
2023-11-06 16:47:05 -08:00
Alexander Motin 79f7de5752 Remove lock from dsl_pool_need_dirty_delay()
Torn reads/writes of dp_dirty_total are unlikely: on 64-bit systems
due to register size, while on 32-bit due to memory constraints.
And even if we hit some race, the code implementing the delay takes
the lock any way.

Removal of the poll-wide lock acquisition saves ~1% of CPU time on
8-thread 8KB write workload.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15390
2023-11-06 16:46:55 -08:00
Olivier Certner edebca5dfc FreeBSD: taskq: Remove unused declaration
Variable 'uma_align_cache' has not been used since commit "FreeBSD: Use
a hash table for taskqid lookups" (3933305ea).  Moreover, it is soon
going to become private to FreeBSD's UMA in 15.0-CURRENT (main),
14.0-STABLE (stable/14) and 13.2-STABLE (stable/13).  Should accessing
this information become necessary again, one will have to use the new
accessors for recent versions.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olivier Certner <olce.freebsd@certner.fr>
Closes #15416
2023-11-06 16:46:32 -08:00
Colin Percival 1cc1bf4fa7 Set spa_ccw_fail_time=0 when expanding a vdev.
When a vdev is to be expanded -- either via `zpool online -e` or via
the autoexpand option -- a SPA_ASYNC_CONFIG_UPDATE request is queued
to be handled via an asynchronous worker thread (spa_async_thread).
This normally happens almost immediately; but will be delayed up to
zfs_ccw_retry_interval seconds (default 5 minutes) if an attempt to
write the zpool configuration cache failed.

When FreeBSD boots ZFS-root VM images generated using `makefs -t zfs`,
the zpoolupgrade rc.d script runs `zpool upgrade`, which modifies the
pool configuration and triggers an attempt to write to the cache file.
This attempted write fails because the filesystem is still mounted
read-only at this point in the boot process, triggering a 5-minute
cooldown before SPA_ASYNC_CONFIG_UPDATE requests will be handled by
the asynchronous worker thread.

When expanding a vdev, reset the "when did a configuration cache
write last fail" value so that the SPA_ASYNC_CONFIG_UPDATE request
will be handled promptly.  A cleaner but more intrusive option would
be to use separate SPA_ASYNC_ flags for "configuration changed" and
"try writing the configuration cache again", but with FreeBSD 14.0
coming very soon I'd prefer to leave such refactoring for a later
date.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colin Percival <cperciva@FreeBSD.org>
Closes #15405
2023-11-06 16:46:25 -08:00
John Wren Kennedy 6d693e20a2 Large sync writes perform worse with slog
For synchronous write workloads with large IO sizes, a pool configured
with a slog performs worse than one with an embedded zil:

sequential_writes 1m sync ios, 16 threads
  Write IOPS:              1292          438   -66.10%
  Write Bandwidth:      1323570       448910   -66.08%
  Write Latency:       12128400     36330970      3.0x

sequential_writes 1m sync ios, 32 threads
  Write IOPS:              1293          430   -66.74%
  Write Bandwidth:      1324184       441188   -66.68%
  Write Latency:       24486278     74028536      3.0x

The reason is the `zil_slog_bulk` variable. In `zil_lwb_write_open`,
if a zil block is greater than 768K, the priority of the write is
downgraded from sync to async. Increasing the value allows greater
throughput. To select a value for this PR, I ran an fio workload with
the following values for `zil_slog_bulk`:

    zil_slog_bulk    KiB/s
    1048576         422132
    2097152         478935
    4194304         533645
    8388608         623031
    12582912        827158
    16777216       1038359
    25165824       1142210
    33554432       1211472
    50331648       1292847
    67108864       1308506
    100663296      1306821
    134217728      1304998

At 64M, the results with a slog are now improved to parity with an
embedded zil:

sequential_writes 1m sync ios, 16 threads
  Write IOPS:               438         1288      2.9x
  Write Bandwidth:       448910      1319062      2.9x
  Write Latency:       36330970     12163408   -66.52%

sequential_writes 1m sync ios, 32 threads
  Write IOPS:               430         1290      3.0x
  Write Bandwidth:       441188      1321693      3.0x
  Write Latency:       74028536     24519698   -66.88%

None of the other tests in the performance suite (run with a zil or
slog) had a significant change, including the random_write_zil tests,
which use multiple datasets.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: John Wren Kennedy <john.kennedy@delphix.com>
Closes #14378
2023-11-06 16:33:23 -08:00
Alexander Motin b76724ae47 FreeBSD: Improve taskq wrapper
- Group tqent_task and tqent_timeout_task into a union.  They are
never used same time. This shrinks taskq_ent_t from 192 to 160 bytes.
 - Remove tqent_registered.  Use tqent_id != 0 instead.
 - Remove tqent_cancelled.  Use taskqueue pending counter instead.
 - Change tqent_type into uint_t.  We don't need to pack it any more.
 - Change tqent_rc into uint_t, matching refcount(9).
 - Take shared locks in taskq_lookup().
 - Call proper taskqueue_drain_timeout() for TIMEOUT_TASK in
taskq_cancel_id() and taskq_wait_id().
 - Switch from CK_LIST to regular LIST.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15356
2023-11-06 16:33:18 -08:00
Martin Matuška 459c99ff23 Fix block cloning between unencrypted and encrypted datasets
Block cloning from an encrypted dataset into an unencrypted dataset
and vice versa is not possible. The current code did allow cloning
unencrypted files into an encrypted dataset causing a panic when
these were accessed. Block cloning between encrypted and encrypted
is currently supported on the same filesystem only.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Rob N <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes #15464
Closes #15465
2023-11-06 10:40:50 -08:00
Jason King 2bba9fd479 Zpool can start allocating from metaslab before TRIMs have completed
When doing a manual TRIM on a zpool, the metaslab being TRIMmed is
potentially re-enabled before all queued TRIM zios for that metaslab
have completed. Since TRIM zios have the lowest priority, it is 
possible to get into a situation where allocations occur from the 
just re-enabled metaslab and cut ahead of queued TRIMs to the same 
metaslab.  If the ranges overlap, this will cause corruption.

We were able to trigger this pretty consistently with a small single 
top-level vdev zpool (i.e. small number of metaslabs) with heavy 
parallel write activity while performing a manual TRIM against a 
somewhat 'slow' device (so TRIMs took a bit of time to complete). 
With the patch, we've not been able to recreate it since. It was on 
illumos, but inspection of the OpenZFS trim code looks like the 
relevant pieces are largely unchanged and so it appears it would be 
vulnerable to the same issue.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason King <jking@racktopsystems.com>
Illumos-issue: https://www.illumos.org/issues/15939
Closes #15395
2023-10-12 11:05:20 -07:00
Daniel Berlin 810fc49a3e Ensure we call fput when cloning fails due to different devices.
Right now, zpl_ioctl_ficlone and zpl_ioctl_ficlonerange do not call
put on the src fd if the source and destination are on two different
devices.  This leaves the source file held open in this case.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Daniel Berlin <dberlin@dberlin.org>
Closes #15386
2023-10-10 19:19:09 -07:00
Tony Hutter a80e1f1c90 zvol: Temporally disable blk-mq
There was a report of zvol data loss (#15351) after enabling blk-mq on a
zvol backed with 16k physical block sized disks.  Out of an abundance of
caution, do not allow the user to enable blk-mq until we can look into
the issue.

Note that blk-mq was not enabled by default on zvols.  It was always
opt-in via the zvol_use_blk_mq module parameter.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Addresses: #15351
Closes #15378
2023-10-10 19:19:09 -07:00
Alexander Motin f6e6e77ed8 FreeBSD: Reduce divergence from in-tree sources
This includes random small tweaks, primarily a build fixes, required
when ZFS is built as part of FreeBSD base.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15368
2023-10-10 19:19:09 -07:00
Alexander Motin 9be8ddfb3c ZIL: Reduce maximum size of WR_COPIED to 7.5K
Benchmarks show that at certain write sizes range lock/unlock take
not so much time as extra memory copy.  The exact threshold is not
obvious due to other overheads, but it is definitely lower than
~63KB used before.  Make it configurable, defaulting at 7.5KB,
that is 8KB of nearest malloc() size minus itx and lr structs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15353
2023-10-07 09:08:20 -07:00
Rob Norris 33d7c2d165 import: require force when cachefile hostid doesn't match on-disk
Previously, if a cachefile is passed to zpool import, the cached config
is mostly offered as-is to ZFS_IOC_POOL_TRYIMPORT->spa_tryimport(), and
the results are taken as the canonical pool config and handed back to
ZFS_IOC_POOL_IMPORT.

In the course of its operation, spa_load() will inspect the pool and
build a new config from what it finds on disk. However, it then
regenerates a new config ready to import, and so rightly sets the hostid
and hostname for the local host in the config it returns.

Because of this, the "require force" checks always decide the pool is
exported and last touched by the local host, even if this is not true,
which is possible in a HA environment when MMP is not enabled. The pool
may be imported on another head, but the import checks still pass here,
so the pool ends up imported on both.

(This doesn't happen when a cachefile isn't used, because the pool
config is discovered in userspace in zpool_find_import(), and that does
find the on-disk hostid and hostname correctly).

Since the systemd zfs-import-cache.service unit uses cachefile imports,
this can lead to a system returning after a crash with a "valid"
cachefile on disk and automatically, quietly, importing a pool that has
already been taken up by a secondary head.

This commit causes the on-disk hostid and hostname to be included in the
ZPOOL_CONFIG_LOAD_INFO item in the returned config, and then changes the
"force" checks for zpool import to use them if present.

This method should give no change in behaviour for old userspace on new
kernels (they won't know to look for the new config items) and for new
userspace on old kernels (the won't find the new config items).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes #15290
2023-10-07 09:08:20 -07:00
Alexander Motin bcd010d3a5 Reduce number of metaslab preload taskq threads.
Before this change ZFS created threads for 50% of CPUs for each top-
level vdev.  Plus it created the same number of threads for embedded
log groups (that have only one metaslab and don't need any preload).
As result, on system with 80 CPUs and pool of 60 vdevs this resulted
in 4800 metaslab preload threads, that is absolutely insane.

This patch changes the preload threads to 50% of CPUs in one taskq
per pool, so on the mentioned system it will be only 40 threads.

Among other things this fixes zdb on the mentioned system and pool
on FreeBSD, that failed to create so many threads in one process.

Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15319
2023-10-07 09:08:20 -07:00
Alexander Motin 3158b5d718 ARC: Drop different size headers for crypto
To reduce memory usage ZFS crypto allocated bigger by 56 bytes ARC
headers only when specific block was encrypted on disk.  It was a
nice optimization, except in some cases the code reallocated them
on fly, that invalidated header pointers from the buffers.  Since
the buffers use different locking, it created number of races, that
were originally covered (at least partially) by b_evict_lock, used
also to protection evictions.  But it has gone as part of #14340.
As result, as was found in #15293, arc_hdr_realloc_crypt() ended
up unprotected and causing use-after-free.

Instead of introducing some even more elaborate locking, this patch
just drops the difference between normal and protected headers. It
cost us additional 56 bytes per header, but with couple patches
saving 24 bytes, the net growth is only 32 bytes with total header
size of 232 bytes on FreeBSD, that IMHO is acceptable price for
simplicity.  Additional locking would also end up consuming space,
time or both.

Reviewe-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15293
Closes #15347
2023-10-07 09:08:20 -07:00
Alexander Motin ba7797c8db ARC: Remove b_bufcnt/b_ebufcnt from ARC headers
In most cases we do not care about exact number of buffers linked
to the header, we just need to know if it is zero, non-zero or one.
That can easily be checked just looking on b_buf pointer or in some
cases derefencing it.

b_ebufcnt is read only once, and in that case we already traverse
the list as part of arc_buf_remove(), so second traverse should not
be expensive.

This reduces L1 ARC header size by 8 bytes and full crypto header by
16 bytes, down to 176 and 232 bytes on FreeBSD respectively.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15350
2023-10-07 09:08:20 -07:00
Alexander Motin bc77a0c85e ARC: Remove b_cv from struct l1arc_buf_hdr
Earlier as part of #14123 I've removed one use of b_cv.  This patch
reuses the same approach to remove the other one from much more
rare code path.

This saves 16 bytes of L1 ARC header on FreeBSD (reducing it from
200 to 184 bytes) and seems even more on Linux.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15340
2023-10-07 09:08:20 -07:00
Andrew Turner 1611b8e56e Add BTI landing pads to the AArch64 SHA2 assembly
The Arm Branch Target Identification (BTI) extension guards against
branching to an unintended instruction.

To support BTI add the landing pad instructions to the SHA2 functions.
These are from the hint space so are a nop on hardware that lacks BTI
support or if BTI isn't enabled.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Andrew Turner <andrew.turner4@arm.com>
Closes #14862
Closes #15339
2023-10-04 12:36:21 -07:00
George Amanakis 608741d062 Report ashift of L2ARC devices in zdb
Commit 8af1104f does not actually store the ashift of cache devices in
their label. However, in order to facilitate reporting the ashift
through zdb, we enable this in the present commit. We also document
how the retrieval of the ashift is done.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #15331
2023-10-03 09:06:07 -07:00
Alexander Motin 3079bf2e6c Restrict short block cloning requests
If we are copying only one block and it is smaller than recordsize
property, do not allow destination to grow beyond one block if it
is not there yet.  Otherwise the destination will get stuck with
that block size forever, that can be as small as 512 bytes, no
matter how big the destination grow later.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15321
2023-10-03 09:06:07 -07:00
Brian Behlendorf b34bf2d5f6 Tweak rebuild in-flight hard limit
Vendor testing shows we should be able to get a little more
performance if we further relax the hard limit which we're hitting.

Authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15324
2023-10-03 09:06:07 -07:00
Akash B 229ca7d738 Fix ENOSPC for extended quota
When unlinking multiple files from a pool at 100% capacity, it
was possible for ENOSPC to be returned after the first few unlinks.
This issue was fixed previously by PR #13172 but then this was
again introduced by PR #13839.

This is resolved using the existing mechanism of returning ERESTART
when over quota as long as we know enough space will shortly be
available after processing the pending deferred frees.

Also, updated the existing testcase which reliably reproduced the
issue without this patch.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes #15312
2023-09-28 14:28:21 -07:00
Paul Dagnelie 9e36c5769f Don't allocate from new metaslabs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15307
Closes #15308
2023-09-28 14:28:21 -07:00
Rob N a199cac6cd status: report pool suspension state under failmode=continue
When failmode=continue is set and the pool suspends, both 'zpool status'
and the 'zfs/pool/state' kstat ignore it and report the normal vdev tree
state. There's no clear indicator that the pool is suspended. This is
unlike suspend in failmode=wait, or suspend due to MMP check failure,
which both report "SUSPENDED" explicitly.

This commit changes it so SUSPENDED is reported for failmode=continue
the same as for other modes.

Rationale:

The historical behaviour of failmode=continue is roughly, "press on as
though all is well". To this end, the fact that the pool had suspended
was not shown, to maintain the façade that all is well.

Its unclear why hiding this information was considered appropriate. One
possibility is that it was expected that a true pool fault would always
be reported as DEGRADED or FAULTED, and that the pool could not suspend
without these happening.

That is not necessarily true, as vdev health and suspend state are only
loosely connected, such that a pool in (apparent) good health can be
suspended for good reasons, and of course a degraded pool does not lead
to suspension. Even if that expectation were true, there's still a
difference in urgency - a degraded pool may not need to be attended to
for hours, while a suspended pool is most often unusable until an
operator intervenes.

An operator that has set failmode=continue has presumably done so
because their workload is one that can continue to operate in a useful
way when the pool suspends. In this case the operator still needs a
clear indicator that there is a problem that needs attending to.

Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #15297
2023-09-22 16:13:20 -07:00
Paul Dagnelie cc75c816c5 Fix l2arc_apply_transforms ztest crash
In #13375 we modified the allocation size of the buffer that we use 
to apply l2arc transforms to be the size of the arc hdr we're using, 
rather than the allocation size that will be in place on the disk, 
because sometimes the hdr size is larger. Unfortunately, sometimes 
the allocation size is larger, which means that we overflow the buffer 
in that case. This change modifies the allocation to be the max of 
the two values

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15177
Closes #15248
2023-09-22 16:13:20 -07:00
Alexander Motin 62677576a7 ZIL: Fix potential race on flush deferring.
zil_lwb_set_zio_dependency() can not set write ZIO dependency on
previous LWB's write ZIO if one is already in done handler and set
state to LWB_STATE_WRITE_DONE.  So theoretically done handler of
next LWB's write ZIO may run before done handler of previous LWB
write ZIO completes.  In such case we can not defer flushes, since
the flush issue process is not locked.

This may fix some reported assertions of lwb_vdev_tree not being
empty inside zil_free_lwb().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15278
2023-09-20 16:41:23 -07:00
Mateusz Guzik f7a07d76ee Retire z_nr_znodes
Added in ab26409db7 ("Linux 3.1 compat, super_block->s_shrink"), with
the only consumer which needed the count getting retired in 066e825221
("Linux compat: Minimum kernel version 3.10").

The counter gets in the way of not maintaining the list to begin with.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes #15274
2023-09-19 08:52:06 -07:00
наб 0ce7a068e9 check-zstd-symbols: also ignore __pfx_ symbols
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b341b20d648bb7e9a3307c33163e7399f0913e66

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #15282 
Closes #15284
2023-09-19 08:52:06 -07:00
George Amanakis 11943656f9 Update the MOS directory on spa_upgrade_errlog()
spa_upgrade_errlog() does not update the MOS directory when the
head_errlog feature is enabled. In this case if spa_errlog_sync() is not
called, the MOS dir references the old errlog_last and errlog_sync
objects. Thus when doing a scrub a panic will occur:

Call Trace:
 dump_stack+0x6d/0x8b
 panic+0x101/0x2e3
 spl_panic+0xcf/0x102 [spl]
 delete_errlog+0x124/0x130 [zfs]
 spa_errlog_sync+0x256/0x260 [zfs]
 spa_sync_iterate_to_convergence+0xe5/0x250 [zfs]
 spa_sync+0x2f7/0x670 [zfs]
 txg_sync_thread+0x22d/0x2d0 [zfs]
 thread_generic_wrapper+0x83/0xa0 [spl]
 kthread+0x104/0x140
 ret_from_fork+0x1f/0x40

Fix this by updating the related MOS directory objects in
spa_upgrade_errlog().

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #15279 
Closes #15277
2023-09-19 08:51:00 -07:00
Andrea Righi cacc599aa2 Linux 6.5 compat: spl: properly unregister sysctl entries
When register_sysctl_table() is unavailable we fail to properly
unregister sysctl entries under "kernel/spl".

This leads to errors like the following when spl is unloaded/reloaded,
making impossible to properly reload the spl module:

[  746.995704] sysctl duplicate entry: /kernel/spl/kmem/slab_kvmem_total

Fix by cleaning up all the sub-entries inside "kernel/spl" when the
spl module is unloaded.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes #15239
2023-09-19 08:50:01 -07:00
Andrea Righi c7ee59a160 Linux 6.5 compat: safe cleanup in spl_proc_fini()
If we fail to create a proc entry in spl_proc_init() we may end up
calling unregister_sysctl_table() twice: one in the failure path of
spl_proc_init() and another time during spl_proc_fini().

Avoid the double call to unregister_sysctl_table() and while at it
refactor the code a bit to reduce code duplication.

This was accidentally introduced when the spl code was
updated for Linux 6.5 compatibility.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes #15234 
Closes #15235
2023-09-19 08:50:01 -07:00
Coleman Kane 58a707375f Linux 6.5 compat: Use copy_splice_read instead of filemap_splice_read
Using the filemap_splice_read function for the splice_read handler was
leading to occasional data corruption under certain circumstances. Favor
using copy_splice_read instead, which does not demonstrate the same
erroneous behavior under the tested failure cases.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15164
2023-09-19 08:50:01 -07:00
Coleman Kane 5a22de144a Linux 6.5 compat: replace generic_file_splice_read with filemap_splice_read
The generic_file_splice_read function was removed in Linux 6.5 in favor
of filemap_splice_read. Add an autoconf test for filemap_splice_read and
use it if it is found as the handler for .splice_read in the
file_operations struct. Additionally, ITER_PIPE was removed in 6.5. This
change removes the ITER_* macros that OpenZFS doesn't use from being
tested in config/kernel-vfs-iov_iter.m4. The removal of ITER_PIPE was
causing the test to fail, which also affected the code responsible for
setting the .splice_read handler, above. That behavior caused run-time
panics on Linux 6.5.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15155
2023-09-19 08:50:01 -07:00
Coleman Kane 31a4673c05 Linux 6.5 compat: register_sysctl_table removed
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15138
2023-09-19 08:50:01 -07:00
Brian Atkinson 3a68f3c50f Revert "Linux 6.5 compat: register_sysctl_table removed"
This reverts commit b35374fd64 as there
are error messages when loading the SPL module. Errors seemed to be tied
to duplicate a duplicate entry.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #15134
2023-09-19 08:50:01 -07:00
Coleman Kane 8be6308e85 Linux 4.20 compat: wrapper function for iov_iter type access
An iov_iter_type() function to access the "type" member of the struct
iov_iter was added at one point. Move the conditional logic to decide
which method to use for accessing it into a macro and simplify the
zpl_uio_init code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15100
2023-09-19 08:50:01 -07:00
Coleman Kane 0bf2c5365e Linux 6.4 compat: iter_iov() function now used to get old iov member
The iov_iter->iov member is now iov_iter->__iov and must be accessed via
the accessor function iter_iov(). Create a wrapper that is conditionally
compiled to use the access method appropriate for the target kernel
version.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15100
2023-09-19 08:50:01 -07:00
Coleman Kane d76de9fb17 Linux 6.5 compat: blkdev changes
Multiple changes to the blkdev API were introduced in Linux 6.5. This
includes passing (void* holder) to blkdev_put, adding a new
blk_holder_ops* arg to blkdev_get_by_path, adding a new blk_mode_t type
that replaces uses of fmode_t, and removing an argument from the release
handler on block_device_operations that we weren't using. The open
function definition has also changed to take gendisk* and blk_mode_t, so
update it accordingly, too.

Implement local wrappers for blkdev_get_by_path() and
vdev_blkdev_put() so that the in-line calls are cleaner, and place the
conditionally-compiled implementation details inside of both of these
local wrappers. Both calls are exclusively used within vdev_disk.c, at
this time.

Add blk_mode_is_open_write() to test FMODE_WRITE / BLK_OPEN_WRITE
The wrapper function is now used for testing using the appropriate
method for the kernel, whether the open mode is writable or not.

Emphasize fmode_t arg in zvol_release is not used

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15099
2023-09-19 08:50:01 -07:00
Coleman Kane 6c2fc56916 Linux 6.5 compat: register_sysctl_table removed
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15098
2023-09-19 08:50:01 -07:00
Alexander Motin e96fbdba34 Add more constraints for block cloning.
- We cannot clone into files with smaller block size if there is
more than one block, since we can not grow the block size.
 - Block size must be power-of-2 if destination offset != 0, since
there can be no multiple blocks of non-power-of-2 size.

The first should handle the case when destination file has several
blocks but still is not bigger than one block of the source file.
The second fixes panic in dmu_buf_hold_array_by_dnode() on attempt
to concatenate files with equal but non-power-of-2 block sizes.

While there, assert that error is reported if we made no progress.

Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
2023-09-10 14:02:52 -07:00
Volker Mauel 4da8c7d11e Intel QAT 1.7 compatibility
Based on the intel QAT samples which are bundled in the 1.x drivers, 
this is the preferred approach since api version 1.6.  See:

https://www.intel.de/content/www/de/de/download/19734/intel-quickassist-technology-driver-for-linux-hw-version-1-x.html?

Reviewed-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Volker Mauel <volkermauel@gmail.com>
Closes #15190
2023-09-07 16:10:52 -07:00
Alexander Motin 79ac1b29d5 ZIL: Change ZIOs issue order.
In zil_lwb_write_issue(), after issuing lwb_root_zio/lwb_write_zio,
we have no right to access lwb->lwb_child_zio. If it was not there,
the first two ZIOs may have already completed and freed the lwb.
ZIOs issue in opposite order from children to parent should keep
the lwb valid till the end, since the lwb can be freed only after
lwb_root_zio completion callback.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15233
2023-09-02 10:30:38 -07:00
Alexander Motin 7dc2baaa1f ZIL: Revert zl_lock scope reduction.
While I have no reports of it, I suspect possible use-after-free
scenario when zil_commit_waiter() tries to dereference zcw_lwb
for lwb already freed by zil_sync(), while zcw_done is not set.
Extension of zl_lock scope as it was originally should block
zil_sync() from freeing the lwb, closing this race.

This reverts #14959 and couple chunks of #14841.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15228
2023-09-02 10:30:38 -07:00
Alexander Motin 5a7cb0b065 ZIL: Tune some assertions.
In zil_free_lwb() we should first assert lwb_state or the rest of
assertions can be misleading if it is false.

Add lwb_state assertions in zil_lwb_add_block() to make sure we are
not trying to add elements to lwb_vdev_tree after it was processed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15227
2023-09-02 10:30:38 -07:00
Dimitry Andric 400f56e3f8 dmu_buf_will_clone: change assertion to fix 32-bit compiler warning
Building module/zfs/dbuf.c for 32-bit targets can result in a warning:

In file included from
/usr/src/sys/contrib/openzfs/include/sys/zfs_context.h:97,
                 from /usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:32:
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c: In function
'dmu_buf_will_clone':
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:116:33: error:
cast from pointer to integer of different size
[-Werror=pointer-to-int-cast]
  116 |         const uint64_t __left = (uint64_t)(LEFT);
  \
      |                                 ^
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:148:25: note:
in expansion of macro 'VERIFY0'
  148 | #define ASSERT0         VERIFY0
      |                         ^~~~~~~
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:2704:9: note: in
expansion of macro 'ASSERT0'
 2704 |         ASSERT0(dbuf_find_dirty_eq(db, tx->tx_txg));
      |         ^~~~~~~

This is because dbuf_find_dirty_eq() returns a pointer, which if
pointers are 32-bit results in a warning about the cast to uint64_t.

Instead, use the ASSERT3P() macro, with == and NULL as second and third
arguments, which should work regardless of the target's bitness.

Reviewed-by: Kay Pedersen <mail@mkwg.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes #15224
2023-09-01 09:33:33 -07:00
Serapheim Dimitropoulos ab999406fe Update outdated assertion from zio_write_compress
As part of some internal gang block testing within Delphix
we hit the assertion removed by this patch. The assertion
was triggered by a ZIO that had two copies and was a gang
block making the following expression equal to 3:
```
MIN(zp->zp_copies + BP_IS_GANG(bp), spa_max_replication(spa))
```
and failing when we expected the above to be equal to
`BP_GET_NDVAS(bp)`.

The assertion is no longer valid since the following commit:
```
commit 14872aaa4f
Author: Matthew Ahrens <matthew.ahrens@delphix.com>
Date:   Mon Feb 6 09:37:06 2023 -0800

  EIO caused by encryption + recursive gang
```

The above commit changed gang block headers so they can't
have more than 2 copies but the assertion in question from
this PR was never updated.

Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #15180
2023-08-26 11:18:11 -07:00
Rob N 92f095a903 copy_file_range: fix fallback when source create on same txg
In 019dea0a5 we removed the conversion from EAGAIN->EXDEV inside
zfs_clone_range(), but forgot to add a test for EAGAIN to the
copy_file_range() entry points to trigger fallback to a content copy.

This commit fixes that.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #15170
Closes #15172
2023-08-25 13:33:40 -07:00
oromenahar 895cb689d3 zfs_clone_range should return a descriptive error codes
Return the more descriptive error codes instead of `EXDEV` when
the parameters don't match the requirements of the clone function.
Updated the comments in `brt.c` accordingly.
The first three errors are just invalid parameters, which zfs can
not handle.
The fourth error indicates that the block which should be cloned
is created and cloned or modified in the same transaction
group (`txg`).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes #15148
2023-08-25 13:33:40 -07:00
Mateusz Piotrowski c418edf1d3 Fix some typos
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Closes #15141
2023-08-25 13:33:40 -07:00
Alexander Motin df8c9f351d ZIL: Second attempt to reduce scope of zl_issuer_lock.
The previous patch #14841 appeared to have significant flaw, causing
deadlocks if zl_get_data callback got blocked waiting for TXG sync.  I
already handled some of such cases in the original patch, but issue
 #14982 shown cases that were impossible to solve in that design.

This patch fixes the problem by postponing log blocks allocation till
the very end, just before the zios issue, leaving nothing blocking after
that point to cause deadlocks.  Before that point though any sleeps are
now allowed, not causing sync thread blockage.  This require slightly
more complicated lwb state machine to allocate blocks and issue zios
in proper order.  But with removal of special early issue workarounds
the new code is much cleaner now, and should even be more efficient.

Since this patch uses null zios between write, I've found that null
zios do not wait for logical children ready status in zio_ready(),
that makes parent write to proceed prematurely, producing incorrect
log blocks.  Added ZIO_CHILD_LOGICAL_BIT to zio_wait_for_children()
fixes it.

Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15122
2023-08-25 11:58:44 -07:00
Alexander Motin bb31ded68b ZIL: Replay blocks without next block pointer.
If we get next block allocation error during log write, we trigger
transaction commit.  But the block we have just completed is still
written and transactions it covers will be acknowledged normally.
If after that we ignore the block during replay just because it is
the last in the chain, we may not replay some transactions that we
have acknowledged as synced, that is not right.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15132
2023-08-25 11:58:44 -07:00
Alexander Motin c1801cbe59 ZIL: Avoid dbuf_read() before dmu_sync().
In most cases dmu_sync() works with dirty records directly and does
not need actual data. The only exception is dmu_sync_late_arrival().
To save some CPU time use dmu_buf_hold_noread*() in z*_get_data()
and explicitly call dbuf_read() in dmu_sync_late_arrival(). There
is also a chance that by that time TXG will already be synced and
we won't have to do it at all.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15153
2023-08-25 11:58:44 -07:00
Alexander Motin ffaedf0a44 Remove fastwrite mechanism.
Fastwrite was introduced many years ago to improve ZIL writes spread
between multiple top-level vdevs by tracking number of allocated but
not written blocks and choosing vdev with smaller count.  It suposed
to reduce ZIL knowledge about allocation, but actually made ZIL to
even more actively report allocation code about the allocations,
complicating both ZIL and metaslabs code.

On top of that, it seems ZIO_FLAG_FASTWRITE setting in dmu_sync()
was lost many years ago, that was one of the declared benefits. Plus
introduction of embedded log metaslab class solved another problem
with allocation rotor accounting both normal and log allocations,
since in most cases those are now in different metaslab classes.

After all that, I'd prefer to simplify already too complicated ZIL,
ZIO and metaslab code if the benefit of complexity is not obvious.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15107
2023-08-25 11:58:44 -07:00
Alexander Motin 02ce9030e6 Avoid waiting in dmu_sync_late_arrival().
The transaction there does not produce any dirty data or log blocks,
so it should not be throttled. All other cases wait for TXG sync, by
which time the log block we are writing will be obsolete, so we can
skip waiting and just return error here instead.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15096
2023-08-25 11:58:44 -07:00
наб bd1eab16eb linux: zfs: ctldir: set [amc]time to snapshot's creation property
If looking up a snapdir inode failed, hold pool config – hold the 
snapshot – get its creation property – release it – release it, 
then use that as the [amc]time in the allocated inode. If that 
fails then fall back to current time. No performance impact since 
this is only done when allocating a new snapdir inode.
                                                       
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #15110
Closes #15117
2023-08-02 08:53:45 -07:00
Rob N c47f0f4417 linux/copy_file_range: properly request a fallback copy on Linux <5.3
Before Linux 5.3, the filesystem's copy_file_range handler had to signal
back to the kernel that we can't fulfill the request and it should
fallback to a content copy. This is done by returning -EOPNOTSUPP.

This commit converts the EXDEV return from zfs_clone_range to
EOPNOTSUPP, to force the kernel to fallback for all the valid reasons it
might be unable to clone. Without it the copy_file_range() syscall will
return EXDEV to userspace, breaking its semantics.

Add test for copy_file_range fallbacks.  copy_file_range should always
fallback to a content copy whenever ZFS can't service the request with
cloning.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #15131
2023-08-02 08:52:40 -07:00
Rob N 12f2b1f65e zdb: include cloned blocks in block statistics
This gives `zdb -b` support for clone blocks.

Previously, it didn't know what clones were, so would count their space
allocation multiple times and then report leaked space (or, in debug,
would assert trying to claim blocks a second time).

This commit fixes those bugs, and reports the number of clones and the
space "used" (saved) by them.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15123
2023-08-02 08:52:40 -07:00
oromenahar c24a480631 BRT should return EOPNOTSUPP
Return the more descriptive EOPNOTSUPP instead of EXDEV when the
storage pool doesn't support block cloning.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes #15097
2023-07-27 16:11:54 -07:00
Rob Norris 2768dc04cc linux: implement filesystem-side copy/clone functions for EL7
Redhat have backported copy_file_range and clone_file_range to the EL7
kernel using an "extended file operations" wrapper structure. This
connects all that up to let cloning work there too.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15050
2023-07-26 08:46:58 -07:00
Rob Norris 3366ceaf3a linux: implement filesystem-side clone ioctls
Prior to Linux 4.5, the FICLONE etc ioctls were specific to BTRFS, and
were implemented as regular filesystem-specific ioctls. This implements
those ioctls directly in OpenZFS, allowing cloning to work on older
kernels.

There's no need to gate these behind version checks; on later kernels
Linux will simply never deliver these ioctls, instead calling the
approprate VFS op.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15050
2023-07-26 08:46:58 -07:00
Rob Norris 5d12545da8 linux: implement filesystem-side copy/clone functions
This implements the Linux VFS ops required to service the file
copy/clone APIs:

  .copy_file_range    (4.5+)
  .clone_file_range   (4.5-4.19)
  .dedupe_file_range  (4.5-4.19)
  .remap_file_range   (4.20+)

Note that dedupe_file_range() and remap_file_range(REMAP_FILE_DEDUP) are
hooked up here, but are not implemented yet.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15050
2023-07-26 08:46:58 -07:00
Rob Norris a3ea8c8ee6 dbuf_sync_leaf: check DB_READ in state assertions
Block cloning introduced a new state transition from DB_NOFILL to
DB_READ. This occurs when a block is cloned and then read on the
current txg.

In this case, the clone will move the dbuf to DB_NOFILL, and then the
read will be issued for the overidden block pointer. If that read is
still outstanding when it comes time to write, the dbuf will be in
DB_READ, which is not handled by the checks in dbuf_sync_leaf, thus
tripping the assertions.

This updates those checks to allow DB_READ as a valid state iff the
dirty record is for a BRT write and there is a override block pointer.
This is a safe situation because the block already exists, so there's
nothing that could change from underneath the read.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Original-patch-by: Kay Pedersen <mail@mkwg.de>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15050
2023-07-26 08:46:58 -07:00
Rob Norris 0426e13271 dmu_buf_will_clone: only check that current txg is clean
dbuf_undirty() will (correctly) only removed dirty records for the given
(open) txg. If there is a dirty record for an earlier closed txg that
has not been synced out yet, then db_dirty_records will still have
entries on it, tripping the assertion.

Instead, change the assertion to only consider the current txg. To some
extent this is redundant, as its really just saying "did dbuf_undirty()
work?", but it it doesn't hurt and accurately expresses our
expectations.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Original-patch-by: Kay Pedersen <mail@mkwg.de>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15050
2023-07-26 08:46:58 -07:00
Rob Norris 8aa4f0f0fc brt_vdev_realloc: use vmem_alloc for large allocation
bv_entcount can be a relatively large allocation (see comment for
BRT_RANGESIZE), so get it from the big allocator.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15050
2023-07-26 08:46:58 -07:00
Rob Norris 7698503dca zfs_clone_range: use vmem_malloc for large allocation
Just silencing the warning about large allocations.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15050
2023-07-26 08:46:58 -07:00
Alexander Motin 991834f5dc Remove zl_issuer_lock from zil_suspend().
This locking was recently added as part of #14979. But appears it
is illegal to take zl_issuer_lock while holding dp_config_rwlock,
taken by dsl_pool_hold().  It causes deadlock with sync thread in
spa_sync_upgrades().  On a second thought, we should not
need this locking, since zil_commit_impl() we call below takes
zl_issuer_lock, that should sufficiently protect zl_suspend reads,
combined with other logic from #14979.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15103
2023-07-25 13:54:02 -07:00
Alexander Motin 41a0f66279 ZIL: Fix config lock deadlock.
When we have some LWBs closed and their ZIOs ready to be issued, we
can not afford sleeping on config lock if somebody else try to lock
it as writer, or it will cause a deadlock.

To solve it, move spa_config_enter() from zil_lwb_write_issue() to
zil_lwb_write_close() under zl_issuer_lock to enforce lock ordering
with other threads.  Now if we can't immediately lock config, issue
all previously closed LWBs so that they could drop their config
locks after completion, and only then allow sleeping on our lock.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15078
Closes #15080
2023-07-25 13:54:02 -07:00
Rob N 685ae4429f metaslab: tuneable to better control force ganging
metaslab_force_ganging isn't enough to actually force ganging, because
it still only forces 3% of the time. This adds
metaslab_force_ganging_pct so we can configure how often to force
ganging.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes #15088
2023-07-21 16:35:12 -07:00
Alexander Motin 81be809a25 Adjust prefetch parameters.
- Reduce maximum prefetch distance for 32bit platforms to 8MB as it
was previously.  Those systems didn't grow much probably, so better
stay conservative there.
 - Retire array_rd_sz tunable, blocking prefetch for large requests.
We should not penalize applications trying to be more efficient. The
speculative prefetcher by itself has reasonable distance limits, and
1MB is not much at all these days.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15072
2023-07-21 16:35:12 -07:00
Alexander Motin 8a6fde8213 Add explicit prefetches to bpobj_iterate().
To simplify error handling bpobj_iterate_blkptrs() iterates through
the list of block pointers backwards.  Unfortunately speculative
prefetcher is currently unable to detect such patterns, that makes
each block read there synchronous and very slow on HDD pools.

According to my tests, added explicit prefetch reduces time needed
to asynchronously delete 8 snapshots of 4 million blocks each from
20 seconds to less than one, that should free sync thread for other
useful work, such as async writes, scrub, etc.

While there, plug one memory leak in case of bpobj_open() error and
harmonize some variable names.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15071
2023-07-21 16:35:12 -07:00
Alan Somers b6f618f8ff Don't emit cksum_{actual_expected} in ereport.fs.zfs.checksum events
With anything but fletcher-4, even a tiny change in the input will cause
the checksum value to change completely.  So knowing the actual and
expected checksums doesn't provide much more information than "they
don't match".  The harm in sending them is simply that they bloat the
event.  In particular, on FreeBSD the event must fit into a 1016 byte
buffer.

Fixes #14717 for mirrored pools.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes #14717
Closes #15052
2023-07-21 16:35:12 -07:00
Alan Somers 51a2b59767 Don't emit checksum histograms in ereport.fs.zfs.checksum events
The checksum histograms were intended to be used with ATA and parallel
SCSI, which are obsolete.  With modern storage hardware, they will
almost always look like white noise; all bits will be wrong.  They only
serve to bloat the event.  That's a particular problem on FreeBSD, where
events must fit into a 1016 byte buffer.

This fixes issue #14717 for RAIDZ pools, but not for mirror pools.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes #15052
2023-07-21 16:35:12 -07:00
Chunwei Chen b221f43943 Fix zpl_test_super race with zfs_umount
We cannot call zpl_enter in zpl_test_super, because zpl_test_super is
under spinlock so we can't sleep, and also because zpl_test_super is
called without sb->s_umount taken, so it's possible we would race with
zfs_umount and call zpl_enter on freed zfsvfs.

Here's an stack trace when this happens:
[ 2379.114837] VERIFY(cvp->cv_magic == CV_MAGIC) failed
[ 2379.114845] PANIC at spl-condvar.c:497:__cv_broadcast()
[ 2379.114854] Kernel panic - not syncing: VERIFY(cvp->cv_magic == CV_MAGIC) failed
[ 2379.115012] Call Trace:
[ 2379.115019]  dump_stack+0x74/0x96
[ 2379.115024]  panic+0x114/0x2f6
[ 2379.115035]  spl_panic+0xcf/0xfc [spl]
[ 2379.115477]  __cv_broadcast+0x68/0xa0 [spl]
[ 2379.115585]  rrw_exit+0xb8/0x310 [zfs]
[ 2379.115696]  rrm_exit+0x4a/0x80 [zfs]
[ 2379.115808]  zpl_test_super+0xa9/0xd0 [zfs]
[ 2379.115920]  sget+0xd1/0x230
[ 2379.116033]  zpl_mount+0xdc/0x230 [zfs]
[ 2379.116037]  legacy_get_tree+0x28/0x50
[ 2379.116039]  vfs_get_tree+0x27/0xc0
[ 2379.116045]  path_mount+0x2fe/0xa70
[ 2379.116048]  do_mount+0x80/0xa0
[ 2379.116050]  __x64_sys_mount+0x8b/0xe0
[ 2379.116052]  do_syscall_64+0x35/0x50
[ 2379.116054]  entry_SYSCALL_64_after_hwframe+0x61/0xc6
[ 2379.116057] RIP: 0033:0x7f9912e8b26a

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #15077
2023-07-21 16:35:12 -07:00
Ameer Hamza e037327bfe spa_min_alloc should be GCD, not min
Since spa_min_alloc may not be a power of 2, unlike ashifts, in the
case of DRAID, we should not select the minimal value among several
vdevs. Rounding to a multiple of it is unlikely to work for other
vdevs. Instead, using the greatest common divisor produces smaller
yet more reasonable results.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #15067
2023-07-21 16:35:12 -07:00
Yuri Pankov 1a2e486d25 Don't panic if setting vdev properties is unsupported for this vdev type
Check that vdev has valid zap and bail out early.

While here, move objid selection out of the loop, it's not going to
change.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes #15063
2023-07-21 16:35:12 -07:00
Ameer Hamza d8011707cc Ignore pool ashift property during vdev attachment
Ashift can be set for a vdev only during its creation, and the
top-level vdev does not change when a vdev is attached or replaced.
The ashift property should not be used during attachment, as it
does not allow attaching/replacing a vdev if the pool's ashift
property is increased after the existing vdev was created. Instead,
we should be able to attach the vdev if the attached vdev can
satisfy the ashift requirement with its parent.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #15061
2023-07-21 16:35:12 -07:00
Alexander Motin 83b0967c1f Do not request data L1 buffers on scan prefetch.
Set ARC_FLAG_NO_BUF when prefetching data L1 buffers for scan.  We
do not prefetch data L0 buffers, so we do not need the L1 buffers,
only want them to be ready in ARC. This saves some CPU time on the
buffers decompression.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15029
2023-07-21 16:35:12 -07:00
Yuri Pankov 5299f4f289 set autotrim default to 'off' everywhere
As it turns out having autotrim default to 'on' on FreeBSD never really
worked due to mess with defines where userland and kernel module were
getting different default values (userland was defaulting to 'off',
module was thinking it's 'on').

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes #15079
2023-07-21 16:35:12 -07:00
Alan Somers f917cf1c03 Fix the ZFS checksum error histograms with larger record sizes
My analysis in PR #14716 was incorrect.  Each histogram bucket contains
the number of incorrect bits, by position in a 64-bit word, over the
entire record.  8-bit buckets can overflow for record sizes above 2k.
To forestall that, saturate each bucket at 255.  That should still get
the point across: either all bits are equally wrong, or just a couple
are.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes #15049
2023-07-21 16:35:12 -07:00
Alexander Motin 56ed389a57 Fix raw receive with different indirect block size.
Unlike regular receive, raw receive require destination to have the
same block structure as the source.  In case of dnode reclaim this
triggers two special cases, requiring special handling:
 - If dn_nlevels == 1, we can change the ibs, but dnode_set_blksz()
should not dirty the data buffer if block size does not change, or
durign receive dbuf_dirty_lightweight() will trigger assertion.
 - If dn_nlevels > 1, we just can't change the ibs, dnode_set_blksz()
would fail and receive_object would trigger assertion, so we should
destroy and recreate the dnode from scratch.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15039

(cherry picked from commit c4e8742149)
2023-07-20 08:58:29 -07:00
Alexander Motin e613e4bbe3 Avoid extra snprintf() in dsl_deadlist_merge().
Since we are already iterating the ZAP, we have exact string key to
remove, we do not need to call zap_remove_int() with the int key we
just converted, we can call zap_remove() for the original string.

This should make no functional change, only a micro-optimization.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15056

(cherry picked from commit fdba8cbb79)
2023-07-20 08:58:29 -07:00
Alexander Motin b4e630b00c Add missed DMU_PROJECTUSED_OBJECT prefetch.
It seems 9c5167d19f "Project Quota on ZFS" missed to add prefetch
for DMU_PROJECTUSED_OBJECT during scan (scrub/resilver).  It should
not cause visible problems, but may affect scub/resilver performance.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15024
2023-07-20 08:58:29 -07:00
Alexander Motin 1266cebf87 FreeBSD: Fix build on stable/13 after 1302506.
Starting approximately from version 1302506 vn_lock_pair() grown two
additional arguments following head.  There is a one week hole, but
that is closet reference point we have.

Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #15047
2023-07-20 08:58:29 -07:00
Prakash Surya 945e39fc3a
Enable tuning of ZVOL open timeout value
The default timeout for ZVOL opens may not be sufficient for all cases,
so we should enable the value to be more easily tuned to account for
systems where the default value is insufficient.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #15023
2023-06-30 11:34:05 -07:00
Rich Ercolani 2b10e32561
Pack our DDT ZAPs a bit denser.
The DDT is really inefficient on 4k and up vdevs, because it always
allocates 4k blocks, and while compression could save us somewhat
at ashift 9, that stops being true.

So let's change the default to 32 KiB, which seems like a reasonable
compromise between improved space savings and inflated write sizes
for DDT updates.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14654
2023-06-30 09:42:02 -07:00
Rob N 61ab05cac7
ddt_addref: remove unnecessary phys fill when refcount is 0
The previous comment wondered if this case could happen; it turns out
that it really can't.

This block can only be entered if dde_type and dde_class are "real";
that only happens when a ddt entry has been previously synced to a ddt
store, that is, it was created on a previous txg. Since its gone through
that sync, its dde_refcount must be >0.

ddt_addref() is called from brt_pending_apply(), which is called at the
beginning of spa_sync(), before pending DMU writes/frees are issued.
Freeing a dedup block is the only thing that can decrement dde_refcount,
so there's no way for it to drop to zero before applying the clone bumps
it.

Further, even if it _could_ go to zero, it wouldn't be necessary to fill
the entry from the block. The phys content is not cleared until the free
is issued, which happens when the refcount goes to zero, when the last
real free comes through. The cloned block should be identical to what's
in the phys already, so the fill should be a no-op anyway.

I've replaced this with an assertion because this is all very dependent
on the ordering in which BRT and DDT changes are applied, and that might
change in the future.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: Klara, Inc.
Closes #15004
2023-06-30 09:01:58 -07:00
Alexander Motin 233425a153
Again fix race between zil_commit() and zil_suspend().
With zl_suspend read in zil_commit() not protected by any locks it
is possible for new ZIL writes to be in progress while zil_destroy()
called by zil_suspend() freeing them.  This patch closes the race
by taking zl_issuer_lock in zil_suspend() and adding the second
zl_suspend check to zil_get_commit_list(), protected by the lock.
It allows all already queued transactions to be logged normally,
while blocks any new ones, calling txg_wait_synced() for the TXGs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14979
2023-06-30 08:59:39 -07:00
Alexander Motin b4a0873092
Some ZIO micro-optimizations.
- Pack struct zio_prop by 4 bytes from 84 to 80.
 - Skip new child ZIO locking while linking to parent.  The newly
allocated ZIO is not externally visible yet, so nobody should care.
 - Skip io_bp_copy writes when not used (write && non-debug).

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14985
2023-06-30 08:54:00 -07:00
Alexander Motin fa7b2390d4
Do not report bytes skipped by scan as issued.
Scan process may skip blocks based on their birth time, DVA, etc.
Traditionally those blocks were accounted as issued, that caused
reporting of hugely over-inflated numbers, having nothing to do
with actual disk I/O.  This change utilizes never used field in
struct dsl_scan_phys to account such skipped bytes, allowing to
report how much data were actually scrubbed/resilvered and what
is the actual I/O speed.  While formally it is an on-disk format
change, it should be compatible both ways, so should not need a
feature flag.

This should partially address the same issue as c85ac731a0, but
from a different perspective, complementing it.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #15007
2023-06-30 08:47:13 -07:00
Alexander Motin a9d6b0690b
ZIL: Fix another use-after-free.
lwb->lwb_issued_txg can not be accessed after lwb_state is set to
LWB_STATE_FLUSH_DONE and zl_lock is dropped, since the lwb may be
freed by zil_sync().  We must save the txg number before that.

This is similar to the 55b1842f92, but as I see the bug is not new.
It existed for quite a while, just was not triggered due to smaller
race window.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14988
Closes #14999
2023-06-27 17:03:37 -07:00
Alexander Motin b0cbc1aa9a
Use big transactions for small recordsize writes.
When ZFS appends files in chunks bigger than recordsize, it borrows
buffer from ARC and fills it before opening transaction.  This
supposed to help in case of page faults to not hold transaction open
indefinitely.  The problem appears when recordsize is set lower than
default 128KB. Since each block is committed in separate transaction,
per-transaction overhead becomes significant, and what is even worse,
active use of of per-dataset and per-pool locks to protect space use
accounting for each transaction badly hurts the code SMP scalability.
The same transaction size limitation applies in case of file rewrite,
but without even excuse of buffer borrowing.

To address the issue, disable the borrowing mechanism if recordsize
is smaller than default and the write request is 4x bigger than it.
In such case writes up to 32MB are executed in single transaction,
that dramatically reduces overhead and lock contention.  Since the
borrowing mechanism is not used for file rewrites, and it was never
used by zvols, which seem to work fine, I don't think this change
should create significant problems, partially because in addition to
the borrowing mechanism there are also used pre-faults.

My tests with 4/8 threads writing several files same time on datasets
with 32KB recordsize in 1MB requests show reduction of CPU usage by
the user threads by 25-35%.  I would measure it in GB/s, but at that
block size we are now limited by the lock contention of single write
issue taskqueue, which is a separate problem we are going to work on.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14964
2023-06-27 17:00:30 -07:00
Alexander Motin 8469b5aac0
Another set of vdev queue optimizations.
Switch FIFO queues (SYNC/TRIM) and active queue of vdev queue from
time-sorted AVL-trees to simple lists.  AVL-trees are too expensive
for such a simple task.  To change I/O priority without searching
through the trees, add io_queue_state field to struct zio.

To not check number of queued I/Os for each priority add vq_cqueued
bitmap to struct vdev_queue.  Update it when adding/removing I/Os.
Make vq_cactive a separate array instead of struct vdev_queue_class
member.  Together those allow to avoid lots of cache misses when
looking for work in vdev_queue_class_to_issue().

Introduce deadline of ~0.5s for LBA-sorted queues.  Before this I
saw some I/Os waiting in a queue for up to 8 seconds and possibly
more due to starvation.  With this change I no longer see it.  I
had to slightly more complicate the comparison function, but since
it uses all the same cache lines the difference is minimal.  For a
sequential I/Os the new code in vdev_queue_io_to_issue() actually
often uses more simple avl_first(), falling back to avl_find() and
avl_nearest() only when needed.

Arrange members in struct zio to access only one cache line when
searching through vdev queues.  While there, remove io_alloc_node,
reusing the io_queue_node instead.  Those two are never used same
time.

Remove zfs_vdev_aggregate_trim parameter.  It was disabled for 4
years since implemented, while still wasted time maintaining the
offset-sorted tree of TRIM requests.  Just remove the tree.

Remove locking from txg_all_lists_empty().  It is racy by design,
while 2 pair of locks/unlocks take noticeable time under the vdev
queue lock.

With these changes in my tests with volblocksize=4KB I measure vdev
queue lock spin time reduction by 50% on read and 75% on write.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14925
2023-06-27 09:09:48 -07:00
Rich Ercolani 35a6247c5f
Add a delay to tearing down threads.
It's been observed that in certain workloads (zvol-related being a
big one), ZFS will end up spending a large amount of time spinning
up taskqs only to tear them down again almost immediately, then
spin them up again...

I noticed this when I looked at what my mostly-idle system was doing
and wondered how on earth taskq creation/destroy was a bunch of time...

So I added a configurable delay to avoid it tearing down tasks the
first time it notices them idle, and the total number of threads at
steady state went up, but the amount of time being burned just
tearing down/turning up new ones almost vanished.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14938
2023-06-26 13:57:12 -07:00
Alexander Motin 8e8acabdca
Fix memory leak in zil_parse().
482da24e2 missed arc_buf_destroy() calls on log parse errors, possibly
leaking up to 128KB of memory per dataset during ZIL replay.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14987
2023-06-17 19:51:37 -07:00
Alexander Motin ccec7fbe1c
Remove ARC/ZIO physdone callbacks.
Those callbacks were introduced many years ago as part of a bigger
patch to smoothen the write throttling within a txg. They allow to
account completion of individual physical writes within a logical
one, improving cases when some of physical writes complete much
sooner than others, gradually opening the write throttle.

Few years after that ZFS got allocation throttling, working on a
level of logical writes and limiting number of writes queued to
vdevs at any point, and so limiting latency distribution between
the physical writes and especially writes of multiple copies.
The addition of scheduling deadline I proposed in #14925 should
further reduce the latency distribution.  Grown memory sizes over
the past 10 years should also reduce importance of the smoothing.

While the use of physdone callback may still in theory provide
some smoother throttling, there are cases where we simply can not
afford it.  Since dirty data accounting is protected by pool-wide
lock, in case of 6-wide RAIDZ, for example, it requires us to take
it 8 times per logical block write, creating huge lock contention.

My tests of this patch show radical reduction of the lock spinning
time on workloads when smaller blocks are written to RAIDZ pools,
when each of the disks receives 8-16KB chunks, but the total rate
reaching 100K+ blocks per second.  Same time attempts to measure
any write time fluctuations didn't show anything noticeable.

While there, remove also io_child_count/io_parent_count counters.
They are used only for couple assertions that can be avoided.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14948
2023-06-15 10:49:03 -07:00
Alexander Motin d057807ede
Switch refcount tracking from lists to AVL-trees.
With large number of tracked references list searches under the lock
become too expensive, creating enormous lock contention.

On my tests with ZFS_DEBUG enabled this increases write throughput
with 32KB blocks from ~1.2GB/s to ~7.5GB/s.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14970
2023-06-14 08:02:27 -07:00
George Amanakis 8af1104f83
Store the L2ARC device ashift in the vdev label
If this is not done, and the pool has an ashift other than the default
(at the moment 9) then the following happens:

1) vdev_alloc() assigns the ashift of the pool to L2ARC device, but
   upon export it is not stored anywhere
2) at the first import, vdev_open() sees an vdev_ashift() of 0 and
   assigns the logical_ashift, which is 9
3) reading the contents of L2ARC, including the header fails
4) L2ARC buffers are not restored in ARC.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14313 
Closes #14963
2023-06-14 08:01:17 -07:00
George Amanakis feff9dfed3
Fix the L2ARC write size calculating logic (2)
While commit bcd5321 adjusts the write size based on the size of the log
block, this happens after comparing the unadjusted write size to the
evicted (target) size.

In this case l2ad_hand will exceed l2ad_evict and violate an assertion
at the end of l2arc_write_buffers().

Fix this by adding the max log block size to the allocated size of the
buffer to be committed before comparing the result to the target
size.

Also reset the l2arc_trim_ahead ZFS module variable when the adjusted
write size exceeds the size of the L2ARC device.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14936
Closes #14954
2023-06-09 17:05:47 -07:00
Alexander Motin 70ea484e3e
Finally drop long disabled vdev cache.
It was a vdev level read cache, designed to aggregate many small
reads by speculatively issuing bigger reads instead and caching
the result.  But since it has almost no idea about what is going
on with exception of ZIO_FLAG_DONT_CACHE flag set by higher layers,
it was found to make more harm than good, for which reason it was
disabled for the past 12 years.  These days we have much better
instruments to enlarge the I/Os, such as speculative and prescient
prefetches, I/O scheduler, I/O aggregation etc.

Besides just the dead code removal this removes one extra mutex
lock/unlock per write inside vdev_cache_write(), not otherwise
disabled and trying to do some work.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14953
2023-06-09 12:40:55 -07:00
Alexander Motin b3ad3f48d9
Use list_remove_head() where possible.
... instead of list_head() + list_remove().  On FreeBSD the list
functions are not inlined, so in addition to more compact code
this also saves another function call.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14955
2023-06-09 10:12:52 -07:00
Alexander Motin 55b1842f92
ZIL: Fix race introduced by f63811f072.
We are not allowed to access lwb after setting LWB_STATE_FLUSH_DONE
state and dropping zl_lock, since it may be freed by zil_sync().
To free itxs and waiters after dropping the lock we need to move
lwb_itxs and lwb_waiters lists elements to local storage.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14957
Closes #14959
2023-06-09 10:08:05 -07:00
Brian Behlendorf 93f8abeff0
Linux: Never sleep in kmem_cache_alloc(..., KM_NOSLEEP) (#14926)
When a kmem cache is exhausted and needs to be expanded a new
slab is allocated.  KM_SLEEP callers can block and wait for the
allocation, but KM_NOSLEEP callers were incorrectly allowed to
block as well.

Resolve this by attempting an emergency allocation as a best
effort.  This may fail but that's fine since any KM_NOSLEEP
consumer is required to handle an allocation failure.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
2023-06-07 10:43:43 -07:00
George Amanakis bcd5321039
Fix the L2ARC write size calculating logic
l2arc_write_size() should return the write size after adjusting for trim
and overhead of the L2ARC log blocks. Also take into account the
allocated size of log blocks when deciding when to stop writing buffers
to L2ARC.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14939
2023-06-06 12:32:37 -07:00
Rob Norris 8653f1de48 zdb: add -B option to generate backup stream
This is more-or-less like `zfs send`, but specifying the snapshot by its
objset id for situations where it can't be referenced any other way.

Sponsored-By: Klara, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #14642
2023-06-05 11:54:42 -07:00
Rob Norris 2b9f8ba673 znode: expose zfs_get_zplprop to libzpool
There's no particular reason this function should be kernel-only, and I
want to use it (indirectly) from zdb. I've moved it to zfs_znode.c
because libzpool does not compile in zfs_vfsops.c, and this at least
matches the header its imported from.

Sponsored-By: Klara, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #14642
2023-06-05 11:53:44 -07:00
Alexander Motin 5ba4025a8d
Introduce zfs_refcount_(add|remove)_few().
There are two places where we need to add/remove several references
with semantics of zfs_refcount_(add|remove). But when debug/tracing
is disabled, it is a crime to run multiple atomic_inc() in a loop,
especially under congested pool-wide allocator lock.

Introduced new functions implement the same semantics as the loop,
but without overhead in production builds.

Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14934
2023-06-05 11:51:44 -07:00
Alexander Motin 482da24e20
ZIL: Allow to replay blocks of any size.
There seems to be no reason for ZIL blocks to be limited by 128KB
other than replay code is written in such a way.  This change does
not increase the limit yet, just removes the artificial limitation.

Avoided extra memcpy() may save us a second during replay.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14910
2023-06-02 11:01:58 -07:00
Luís Henriques 928c81f4df
Fix NULL pointer dereference when doing concurrent 'send' operations
A NULL pointer will occur when doing a 'zfs send -S' on a dataset that
is still being received.  The problem is that the new 'send' will
rightfully fail to own the datasets (i.e. dsl_dataset_own_force() will
fail), but then dmu_send() will still do the dsl_dataset_disown().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Luís Henriques <henrix@camandro.org>
Closes #14903 
Closes #14890
2023-05-30 15:15:24 -07:00
Richard Yao 677c6f8457
btree: Implement faster binary search algorithm
This implements a binary search algorithm for B-Trees that reduces
branching to the absolute minimum necessary for a binary search
algorithm. It also enables the compiler to inline the comparator to
ensure that the only slowdown when doing binary search is from waiting
for memory accesses. Additionally, it instructs the compiler to unroll
the loop, which gives an additional 40% improve with Clang and 8%
improvement with GCC.

Consumers must opt into using the faster algorithm. At present, only
B-Trees used inside kernel code have been modified to use the faster
algorithm.

Micro-benchmarks suggest that this can improve binary search performance
by up to 3.5 times when compiling with Clang 16 and up to 1.9 times when
compiling with GCC 12.2.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14866
2023-05-26 10:03:12 -07:00
George Amanakis bb736d98d1
Fix inconsistent definition of zfs_scrub_error_blocks_per_txg
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14894
2023-05-26 09:53:00 -07:00
Alexander Motin b6fbe61fa6
zil: Add some more statistics.
In addition to a number of actual log bytes written, account also a
total written bytes including padding and total allocated bytes (bytes
<= write <= alloc).  It should allow to monitor zil traffic and space
efficiency.

Add dtrace probe for zil block size selection.

Make zilstat report more information and fit it into less width.

Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14863
2023-05-25 13:51:53 -07:00
Alexander Motin f63811f072
ZIL: Reduce scope of per-dataset zl_issuer_lock.
Before this change ZIL copied all log data while holding the lock.
It caused huge lock contention on workloads with many big parallel
writes.  This change splits the process into two parts: first,
zil_lwb_assign() estimates the log space needed for all transactions,
and zil_lwb_write_close() allocates blocks and zios while holding the
lock, then, after the lock in dropped, zil_lwb_commit() copies the
data, and zil_lwb_write_issue() issues the I/Os.

Also while there slightly reduce scope of zl_lock.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14841
2023-05-25 09:48:43 -07:00
Akash B 9d618615d1
Fix concurrent resilvers initiated at same time
For draid vdevs it was possible to initiate both the
sequential and healing resilver at same time.

This fixes the following two scenarios.
     1) There's a window where a sequential rebuild can
be started via ZED even if a healing resilver has been
scheduled.
	- This is fixed by adding additional check in
spa_vdev_attach() for any scheduled resilver and return
appropriate error code when a resilver is already in
progress.

     2) It was possible for zpool clear to start a healing
resilver when it wasn't needed at all. This occurs because
during a vdev_open() the device is presumed to be healthy not
until the device is validated by vdev_validate() and it's set
unavailable. However, by this point an async resilver will
have already been requested if the DTL isn't empty.
	- This is fixed by cancelling the SPA_ASYNC_RESILVER
request immediately at the end of vdev_reopen() when a resilver
is unneeded.

Finally, added a testcase in ZTS for verification.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes #14881
Closes #14892
2023-05-24 12:28:09 -07:00