This commit allow higher ashift values (up to 16) in 'zpool create'
The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.
Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.
Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.
Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#2024Closes#4205Closes#4740Closes#5763
When vdev_psize increases, the location of labels 2 and 3 changes
because their location is relative to the end of the device.
The configs for labels 2 and 3 are written during the next spa_sync()
because the vdev is added to the dirty config list. However, the
uberblock rings are not re-written in their new location, leaving the
device vulnerable to the beginning of the device being overwritten or
damaged.
This patch copies the uberblock ring from label 0 to labels 2 and 3,
in their new locations, at the next sync after vdev_psize increases.
Also, add a test zpool_expand_004_pos.ksh to confirm the uberblocks
are copied.
Reviewed-by: BearBabyLiu <liu.huang@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5108
* Add zfs_nicebytes() to print human-readable sizes
Some 'zfs', 'zpool' and 'zdb' output strings can be confusing to the
user when no units are specified. This add a new zfs_nicenum_format
"ZFS_NICENUM_BYTES" used to print bytes in their human-readable form.
Additionally, update some test cases to use machine-parsable 'zfs get'.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#2414Closes#3185Closes#3594Closes#6032
OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7628 - create long versions of ZFS send / receive options
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: bunder2015 <omfgbunder@gmail.com>
Ported-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Most of 7252 was already picked up during ABD work. This
commit represents the gap from the final commit to openzfs.
- Fixed split_large_blocks check in do_dump()
- An alternate version of the write_compressible() function was
implemented for Linux which does not depend on fio. The behavior
of fio differs significantly based on the exact version.
- mkholes was replaced with truncate for Linux.
OpenZFS-issue: https://www.illumos.org/issues/7252
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5602294Closes#6067
This patch updates the "zpool status/iostat -c" commands to only run
"pre-baked" scripts from the /etc/zfs/zpool.d directory (or wherever
you install to). The scripts can only be run from -c as an unprivileged
user (unless the ZPOOL_SCRIPTS_AS_ROOT environment var is
set by root). This was done to encourage scripts to be written is such
a way that normal users can use them, and to be cautious. If your
script needs to run a privileged command, consider adding the
appropriate line in /etc/sudoers. See zpool(8) for an example of how
to do this.
The patch also allows the scripts to output custom column names. If
the script outputs a line like:
name=value
then "name" is used for the column name, and "value" is its value.
Multiple columns can be specified by outputting multiple lines. Column
names and values can have spaces. If the value is empty, a dash (-) is
printed instead.
After all the "name=value" lines are read (if any), zpool will take the
next the next line of output (if any) and print it without a column
header. After that, no more lines will be processed. This can be
useful for printing errors.
Lastly, this patch also disables the -c option with the latency and
request size histograms, since it produced awkward output and made the
code harder to maintain.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#5852
The `dd` command as written will not create a hole in the file.
Additionally, the `stride` argument isn't understood by `dd` so
it's replaced with `seek` which isn't equivilant but will result in
a single whole which is sufficient for the test case. Finally,
`conv=notrunc` is added to avoid truncating the file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#6023
Authored by: Richard Yao <ryao@gentoo.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
This was already implemented in ZFS on Linux. This patch
is to resolved the deltas present in our version.
OpenZFS-issue: https://www.illumos.org/issues/6392
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97deCloses#6020
Ensure `zinject -c` all gets called whenever
zpool_scrub_004_pos exits.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Issue #5444Closes#6021
Error example in `zfs_list_007_pos`:
`sudo: dmesg: command not found`
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#6024
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Enable internal log for DEBUG builds and in zfs-tests.sh.
- callbacks/zfs_dbgmsg.ksh - Dump interal log via kstat.
- callbacks/zfs_dmesg.ksh - Dump dmesg log.
- default.cfg - 'Test Suite Specific Commands' dropped.
OpenZFS-issue: https://www.illumos.org/issues/7503
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a1300Closes#6002
musl's sys/errno.h is literally:
/#warning redirecting incorrect #include <sys/errno.h> to <errno.h>
/#include <errno.h>
It does the same for sys/{poll,signal}.h. This is rather noisy when
building ZoL against musl. musl is also correct in pointing out that the
correct headers are outside of sys/ according to the single unix
specification:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/errno.h.htmlhttp://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.h.htmlhttp://pubs.opengroup.org/onlinepubs/7908799/xsh/signal.h.html
Lets implement our own sys/* versions of these headers to redirect to
the proper userland ones when building in userspace. That will silence
the warning.
There are also some instances where we include incorrectly from sys/ or
from outside of sys/ in userspace only code. In these instances, lets
just fix the includes directly.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#5993
Authored by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- zfs_share_001_pos.ksh - Older versions of exportfs will match
multiple exports that share a common prefix. Reorder the 'fs'
list so unshares occur from most to least unique.
- zfs_share_005_pos.ksh - Enabled and updated for Linux.
OpenZFS-issue: https://www.illumos.org/issues/7535
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ac89d1eCloses#5979
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Updated 'zpool labelclear' and 'zdb -l' such that they attempt
to find a vdev given solely its short name. This behavior is
consistent with the upstream OpenZFS code and the test cases
depend on it. The actual implementation differs slightly due
to device naming conventions on Linux.
- auto_online_001_pos, auto_replace_001_pos and add-o_ashift
test cases updated to expect failure when no label exists.
- read_efi_label() and zpool_label_disk_check() are read-only
operations and should use O_RDONLY at open time to enforce this.
- zpool_label_disk() and zpool_relabel_disk() write the partition
information using O_DIRECT an fsync() and page cache invalidation
to ensure a consistent view of the device.
- dump_label() in zdb should invalidate the page cache in order
to get the authoritative label from disk.
OpenZFS-issue: https://www.illumos.org/issues/6865
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95076cCloses#5981
When we try assign a new transaction to a TXG we must know beforehand
if there is sufficient free space on disk. This is to decide,
in dmu_tx_assign(), if we should reject the TX with ENOSPC.
We rely on spa_get_worst_case_asize() to inflate the size of our
logical writes by a factor of spa_asize_inflation which is
calculated as:
(VDEV_RAIDZ_MAXPARITY + 1) * SPA_DVAS_PER_BP * 2 == 24
The problem with the current implementation is that we don't take
into account what happens with very small writes on VDEVs with large
physical block sizes.
Consider the case of writes to a dataset with recordsize=512,
copies=3 on a VDEV with ashift=13 (usually SSD with 8K block size):
every logical IO will end up allocating 3 * 8K = 24K on disk, so 512
bytes multiplied by 48, which is double the size we account for.
If we allow this kind of writes to be assigned a TX it is possible,
when the pool is almost full, to trigger an allocation failure
(ENOSPC) in the ZIO pipeline, which will in turn result in the whole
pool being suspended.
The bug is fixed by using, in spa_get_worst_case_asize(), the MAX()
value chosen between the logical io size from zfs_write() and the
maximum physical block size used among our VDEVs.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5941
Authored by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/2932
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/810e43bCloses#5984Closes#5216
`dircmp` doesn't exist in Linux while `diff` is already used
by zfstests on all platforms.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5996
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5997
Ksh uses `typeset`, `local` is a Bash analog.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5995
Ksh syntax requires a space after `!` in if statement.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5994
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Marcel Telka <marcel@telka.sk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Removed gzip and zle compression restriction on bootfs
datasets. Grub added support for these long ago. Ay
version of grub which understands lz4 also supports this.
- Enabled rootpool tests in runfile but skipped by default
in setup on Linux since they modify the rootpool.
- bootfs_006_pos.ksh, striped pools are allowed as bootfs.
OpenZFS-issue: https://www.illumos.org/issues/7404
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a424cCloses#5982
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Multiple changes in this commit were applied in c1d9abf.
OpenZFS-issue: https://www.illumos.org/issues/7629
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f5fb56dCloses#5980
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
Porting Notes:
- Utilities which aren't available under Linux have been removed.
- Because of sudo's default secure path behavior PATH must be
explicitly reset at the top of libtest.shlib. This avoids the
need for all users to customize secure path on their system.
- Updated ZoL infrastructure to manage constrained path
- Updated all test cases
- Check permissions for usergroup tests
- When testing in-tree create links under bin/
- Update fault cleanup such that missing files during
cleanup aren't fatal.
- Configure su environment with constrained path
OpenZFS-issue: https://www.illumos.org/issues/7290
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1d32ba6Closes#5903
Also included are updates to auto-online test
Automated auto-replace test to go along with ZED FMA integration
(PR 4673) auto-replace_001.pos works using a scsi_debug device
(the only usable virtual device currently due to whole_disk var
needing to be set)
Functionality for automated FMA auto-replace test to work with
scsi_debug devs: Some functionality/exceptions needed to be
added for automation of auto-replace to work correctly.
In the test an alias vdev_id rule is added for any scsi_debug
device which sets the phys_path="scsidebug" after a udevadm
trigger command.
A symlink is created for the vdev_id.conf file (in /etc/zfs/ by
default) to be used in-tree for the test suite
(/var/tmp/zfs/vdev_id.conf). "./scripts/zfs-helpers.sh -i" needs
to be run before fault tests in the ZTS (to use udev rules in-tree)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Closes#5944
Manpage suggests the zpool list properties include 'used'
and 'available', when these are invalid property names.
Use alloc and free in their place.
```
$ zpool list -o name,size,used 2>&1 |head -1
bad property list: invalid property 'used'
$ zpool list -o name,size,avail 2>&1 |head -1
bad property list: invalid property 'avail'
$ zpool list -o name,size,available 2>&1 |head -1
bad property list: invalid property 'available'
$ zpool list -o name,size,alloc,free
NAME SIZE ALLOC FREE
apool 464M 203M 261M
bpool 3.62T 1.97T 1.65T
```
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Matthews <tom@axiom-partners.com>
Closes#5959
`test_options_bookmark` function must have an `s` at the end.
Reviewed-by: Marcel Telka <marcel@telka.sk>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5957
Test cases must be executable or they will be skipped.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5947
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.
Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5878
Test rsend_009_pos has been observed to fail pretty frequently
when testing using a kmemleak enabled kernel. For the moment
disable this test case until the underlying issue is resolved.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5887Closes#5934
For zdb -l, detect when the configuration nvlist in some label l (l>0)
is the same as a configuration already dumped. If so, do not dump it.
Make a similar check when dumping Uberblocks for zdb -lu. Check whether
a label already dumped contains an identical Uberblock. If so, do not
dump the Uberblock.
When dumping a configuration or Uberblock, state which labels it is
found in (0-3), for example: labels = 1 2 3
Detecting redundant uberblocks or configurations is accomplished by
calculating checksums of the uberblocks and the packed nvlists
containing the configuration.
If there is nothing unique to be dumped for a label (ie the
configuration and uberblocks have checksums matching those already
dumped) print nothing for that label.
With additional l's or u's, increase verbosity as follows:
-l Dump each unique configuration only once.
Indicate which labels it appears in.
-ll In addition, dump label space usage stats.
-lll Dump every configuration, unique or not.
-u Dump each unique, valid, uberblock only once.
Indicate which labels it appears in.
-uu In addition, state which slots are invalid.
-uuu Dump every uberblock, unique or not.
-uuuu Dump the uberblock blockpointer (used to be -uuu)
Make exit values conform to the manual page. Failing to unpack a
configuration nvlist is considered an error, as well as failing to open
or read from the device.
Add three tests, zdb_00{3,4,5}_pos to verify the above functionality.
An example of the output:
------------------------------------
LABEL 0
------------------------------------
version: 5000
name: 'pool'
state: 1
txg: 880
< ... redacted ... >
features_for_read:
com.delphix:hole_birth
com.delphix:embedded_data
labels = 0
Uberblock[0]
magic = 0000000000bab10c
version = 5000
txg = 0
guid_sum = 3038694082047428541
timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017
labels = 0 1 2 3
Uberblock[4]
magic = 0000000000bab10c
version = 5000
txg = 772
guid_sum = 9045970794941528051
timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017
labels = 0
< ... redacted ... >
------------------------------------
LABEL 1
------------------------------------
version: 5000
name: 'pool'
state: 1
txg: 14
< ... redacted ... >
com.delphix:embedded_data
labels = 1 2 3
Uberblock[4]
magic = 0000000000bab10c
version = 5000
txg = 4
guid_sum = 7793930272573252584
timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017
labels = 1 2 3
< ... redacted ... >
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5738
32-bit builders in the buildbot are having trouble completing
their ENOSPC testing in less than the timeout. Reduce the
zvol size and use a 4k block size to reduce read-modify-writes
which are particularly expensive on 32-bit systems due to the
reduced maximum ARC size.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kash Pande <kash@tripleback.net>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5845
Automated auto-online test to go along with ZED FMA integration (PR 4673)
auto_online_001.pos works with real devices (sd- and mpath) and with non-real
block devices (loop) by adding a scsi_debug device to the pool
Note: In order for test group to run, ZED must not currently be running.
Kernel 3.16.37 or higher needed for scsi_debug to work properly
If timeout occurs on test using a scsi_debug device (error noticed on Ubuntu
system), a reboot might be needed in order for test to pass. (more
investigation into this)
Also suppressed output from is_real_device/is_loop_device/is_mpath_device -
was making the log file very cluttered with useless error messages
"ie /dev/mapper/sdc is not a block device" from previous patch
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Closes#5774
Authored by: Ahmed G <ahmedg@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Stephen Blinick <stephen.blinick@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
- Using $FIO until 7290 is ported.
OpenZFS-issue: https://www.illumos.org/issues/7736
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7a61309Closes#5827
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7337
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b021ac0Closes#5800
Porting notes:
- Additional code refactor for better Zol and OpenZFS codebase sync
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7001
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/258c9c7Closes#5801
Porting notes:
- Most of the changes were previously applied.
7249 rsend_015_pos produces false failures due to race
7250 testrunner can miss options specific to individual tests in runfiles
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7248
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f9a78bfCloses#5799
Authored by: Matthew Ahrens <mahrens@delphix.com>
6405 zvol test setup is non deterministic
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6404
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/24e268fCloses#5792
Porting notes:
- Converted zfs to $ZFS until OpenZFS 7290 is ported.
openzfs/openzfs@1d32ba6
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7260
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/447b1e1Closes#5794
Porting notes:
- The library libdiskmgmt is specific to illumos so these changes
currently have no impact under Linux. This mechanism could be
potentially leveraged in the future.
Use -pH flags in get_pool_prop so that numeric properties such as size
can be compared. The zpool_expand test suite is currently the only one
which uses get_pool_prop for a numeric property.
Add TEMPFILE and TEMPFILE{0,1,2} to default.cfg for tests that must
build pools on top of files, such as this one where expansion is
necessary but the entries in DISKS may not point to entities that can be
expanded.
Base the pool used for testing on file-type VDEVs instead of using zvols
within an underlying pool, to avoid issues that come up when pools are
backed by other pools.
Remove shell variables EX_1GB and EX_2GB used to recognize correct expansion,
and instead calculate the appropriate values based on the variables used to
control file or volume size, org_size and exp_size. This change is also
made in test 001 although that test is not enabled because it depends on
FMA.
Finally, enable zpool_expand_002_pos.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5757
Authored by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6754
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/01ff411Closes#5787
Porting notes:
- Only the ACL test cases used this function and they have been
dropped from ZoL since Linux used POSIX style ACLs.
- functional/acl/nontrivial/zfs_acl_chmod_aclmode_001_pos.ksh
- functional/acl/nontrivial/zfs_acl_chmod_inherit_003_pos.ksh
- functional/acl/nontrivial/zfs_acl_chmod_rwx_002_pos.ksh
Sometimes zfstests check freed space just after
`zfs destroy snapshot` and get wrong output, because the
space being freed asynchronously in the background.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Issue #5740
Issue #5784Closes#5785
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7162
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9ec0cbebCloses#5511Closes#5779
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7496
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5dc1fd7Closes#5781
6643 zfstest should enforce the required privileges before running.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Jonathan Mackenzie <jonathan.mackenzie@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov
OpenZFS-issue: https://www.illumos.org/issues/6642
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/412db4eCloses#5777
Porting notes:
- The 6643 changes were dropped a different version of this script
is used to configure the environment under Linux.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7104
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4b5c8e9Closes#5679
The ziltest.sh script is a test case designed to verify the correct
functioning of the ZIL. For historical reasons it was never added
to the test suite and was always run independantly.
This change rectifies that. The existing ziltest.sh has been
translated in to `slog_015_pos.ksh` and added to the existing
slog test cases.
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5758
Sometimes the ZTS checks freed space just after `zfs destroy snapshot` and
gets an unexpected value because of space being freed asynchronously.
For cases like this add a `wait_freeing` function which blocks until the
pools `freeing` property drops to zero.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5740
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5669Closes#5743
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7247
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ad25b4Closes#5689
Porting notes:
- tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh
renamed as zfs_receive_015_pos.ksh, zfs_receive_013_pos.ksh is now
used for OpenZFS test.
- libzfs_sendrecv.c: SMALLEST_POSSIBLE_MAX_DDT_MB is always used
for all 32-bit builds.
Commit 539d33c seems to have significantly increased the run time
of the sparse_001_pos.ksh and truncate_001_pos.ksh test cases on
32-bit systems. This is likely due to dirty blocks from frees
being deferred to later txgs.
At the moment this is resulting in frequent failures on the
32-bit builders. Disable this test case until the issue can be
analyzed and resolved.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5727Closes#5728
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Don Brady <don.brady@intel.com>
OpenZFS-issue: https://www.illumos.org/issues/6866
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3e4fae5Closes#5730
Porting Notes:
- Omitted the illumos-specific `/dev/dsk` and `/dev/rdsk`
path conversions since they don't apply on linux.
Earlier commit added a test that created tmpfile_003_pos,
but did not add it to the appropriate .gitignore.
ace1eae Add support for O_TMPFILE
Fix the omission.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5735
Convert explicit `typeset -i` and `typeset -l` declarations to
`typeset` in order to prevent 32-bit overflow from occurs with
disks >2G.
TEST_ZFSTESTS_DISKSIZE=4G
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5715Closes#5714
Running tests locally were failing on cleanup scripts due to having a
pool named "pool". Match on word so the cleanup logic will cleanup
"testpool.*" while ignoring "pool".
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tim Crawford <tcrawford@datto.com>
Closes#5703
The .write/.read file operations callbacks can be retired since
support for .read_iter/.write_iter and .aio_read/.aio_write has
been added. The vfs_write()/vfs_read() entry functions will
select the correct interface for the kernel. This is desirable
because all VFS write/read operations now rely on common code.
This change also add the generic write checks to make sure that
ulimits are enforced correctly on write.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5587Closes#5673
Porting notes:
- statvfs64 is replaced by statfs64.
- ZFS_SUPER_MAGIC definition moved in include/sys/fs/zfs.h
to share it between user and kernel space.
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7336
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dd862f6dCloses#5651
After volume creation wait until the new block devices have settled
before destroying them. Failure to do some can result in EBUSY
being returned and the test case failing.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5636Closes#5637
Enable zpool_clear_001_pos, zpool_create_024_pos and inherit_001_pos. These
are no longer slow.
Also disable zfs_destroy_001_pos, zfs_allow_010_pos and snapused_004_pos,
as they fail very often.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5613
The following test cases may currently fail for benign reasons.
Disable them until they can be updated to run reliably.
- ro_props_001_pos - only recently enabled in ce43e88
- nopwrite_volume
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5614
Fix dmu_object_next() to correctly handle unallocated objects on
large_dnode datasets.
We implement this by scanning the dnode block until we find the correct
offset to be used in dnode_next_offset(). This is necessary because we
can't assume *objectp is a hole even if dmu_object_info() returns
ENOENT.
This fixes a couple of issues with zfs receive on large_dnode datasets.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5027Closes#5532
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5547Closes#5543
Fix a regression accidentally introduced by e0ab3ab.
Additionally, add a new script zpool_import_014_pos.ksh to
the ZFS test suite to exercise 'zpool import -t' functionality.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5466Closes#5515
When iterating over the input nvlist in dsl_props_set_sync_impl() when we don't
preserve the nvpair name before looking up ZPROP_VALUE, so when we later go to
process it nvpair_name() is always "value" and not the actual property name.
This fixes a couple of bugs in zfs_ioc_recv():
* Received properties were not restored correctly when failing to receive an
incremental send stream
* Received properties were not completely replaced by the new ones when
successfully receiving an incremental send stream
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5497
This branch contains the following fixes/improvements.
* Fix setting i_flags
* Fix wrong operator in xvattr.h
* Fix fchange macro in zpl_ioctl_setflags()
* Added configure check to use inode_set_flags()
* Added a test case for chattr for better test coverage
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5486Closes#5470Closes#5469
zpool iostat allows you to specify only certain vdevs to display.
Currently, if you run 'zpool iostat -c CMD vdev1 vdev2 ...'
on specific vdevs, it will actually run the command on *all* vdevs,
and just display the results for the vdevs you specify. This patch
corrects the behavior to only run the command on the specified vdevs,
and also enables the zpool_iostat_005_pos.ksh tests.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#5443
When running the ZFS Test Suite with a kmemleak enabled kernel
the following test cases run far slower than usual and may hit
their timeout threshold. Skip the following test cases.
Test: cli_root/zfs_get/zfs_get_009_pos (run as root) [55:43]
Test: cli_root/zpool_clear/zpool_clear_001_pos (run as root) [11:32]
Test: cli_root/zpool_create/zpool_create_024_pos (run as root) [11:01]
Test: features/async_destroy/async_destroy_001_pos (run as root) [41:15]
Test: inheritance/inherit_001_pos (run as root) [09:08]
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5479Closes#5480
Enable picky cstyle checks and resolve the new warnings. The vast
majority of the changes needed were to handle minor issues with
whitespace formatting. This patch contains no functional changes.
Non-whitespace changes are as follows:
* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5465
Don't count '@' for dataset namelen if not a snapshot. This
fixes making a pool unimportable when the dataset namelen
is 255.
Add test file for zfs create name length 255.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5432Closes#5456
Update the test case to correctly interpret how Linux reports
the mount options.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Closes#5410
The zpool_scrub_004_pos test case currently fails when testing on
a 32-bit system. Conditionally skip this test case on 32-bit
systems until the root cause is identified and resolved.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5444Closes#5445
This script was disabled as the avail/used space changed slightly.
Add sync_pool() and a short delay after snapshots are created to
ensure everything in flight has been written.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Closes#5201Closes#5419
This patch adds a command (-c) option to zpool status and zpool iostat. The
-c option allows you to run an arbitrary command on each vdev and display
the first line of output in zpool status/iostat. The environment vars
VDEV_PATH and VDEV_UPATH are set to the vdev's path and "underlying path"
before running the command. For device mapper, multipath, or partitioned
vdevs, VDEV_UPATH is the actual underlying /dev/sd* disk. This can be useful
if the command you're running requires a /dev/sd* device.
The patch also uses /sys/block/<dev>/slaves/ to lookup the underlying device
instead of using libdevmapper. This not only removes the libdevmapper
requirement at build time, but also allows you to resolve device mapper
devices without being root. This means that UDEV_UPATH get set correctly
when running zpool status/iostat as an unprivileged user.
Example:
$ zpool status -c 'echo I am $VDEV_PATH, $VDEV_UPATH'
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
mpatha ONLINE 0 0 0 I am /dev/mapper/mpatha, /dev/sdc
sdb ONLINE 0 0 0 I am /dev/sdb1, /dev/sdb
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#5368
Allow `zfs unshare <protocol> -a` command to share or unshare all datasets
of a given protocol, nfs or smb.
Additionally, enable most of ZFS Test Suite zfs_share/zfs_unshare test cases.
To work around some Illumos-specific functionalities ($SHARE/$UNSHARE) some
function wrappers were added around them.
Finally, fix and issue in smb_is_share_active() that would leave SMB shares
exported when invoking 'zfs unshare -a'
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#3238Closes#5367
Each test in the performance regression test suite
creates a pool and a dataset for use. Unfortunately,
these tests do not cleanup the pool and dataset
correctly once they complete. Each test now kills
fio and iostat, destroys the dataset, and finally
destroys the pool. Each test also now traps the
SIGTERM signal to handle cases where test-runner
kills a test.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Requires-builders: all
Closes#5407
The user_property_002_pos passes as expected.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Closes#5406
The isainfo(1) utility was used by the ZFS Test Suite to determine
when running on a 32-bit platform. This non-portable check has been
replaced with an is_32bit helper function which uses getconf(1).
The getconf(1) utility is available for Linux, FreeBSD, and Illumos.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on
supported filesystem. It's basically doing open(2) and unlink(2) atomically.
The filesystem support is added through i_op->tmpfile. We basically copy the
create operation except we get rid of the link and name related stuff and add
the new node to unlinked set.
We also add support for linkat(2) to link tmpfile. However, since all previous
file operation will skip ZIL, we force a txg_wait_synced to make sure we are
sync safe.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
The async_destroy_001_pos test case currently hangs when testing on
a 32-bit system. Conditionally skip this test case on 32-bit
systems until the root cause is identified and resolved.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5352
Issue #5347
Due to the instability of the migration tests, the test will skip.
The migration tests focus on migrating test file from fs to ZFS fs.
We can create zpool and ext2 directly by loop device, rather than
by set_partition
Reviewed-by: Sydney Vanda <sydney.m.vanda@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: legend-hua <liu.hua130@zte.com.cn>
Closes#5315
Sometimes it is desirable to specifically disable one or several
features directly on the 'zpool create' command line.
$ zpool create -o feature@<feature>=disabled ...
Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#3460Closes#5142Closes#5324
This test case frequently triggers issue #4034. There exists a
fix for this which is in the process of being upstreamed. Until
that fix is available disable the test case.
Reviewed by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5329
Issue #4034
When creating and destroying pools in tight loop it's possible to
exhaust the number of allowed threads on a system. This results
in taskq_create() failling and a NULL dereference.
Resolve the issue by falling back to opening the vdevs all
synchronously.
Reviewed-by: Denys Rtveliashvili <denys@rtveliashvili.name>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/spl#521
Closes#4637
test-runner should be creating the current symlink in the
directory above the output directory. In a previous commit,
the current symlink was placed in the current working
directory, which could be inaccessible. It is more likely
that the output directory is always accessible.
This is needed because without this there's no deterministic
way to get the path to ZFS Test Suite results until after the
test suite has started. This makes it difficult for buildbot to
follow the log file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5314
Log function should be "log_fail", rather than "log_failED"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: legend-hua <liu.hua130@zte.com.cn>
Closes#5300
The file tests/zfs-tests/tests/stress/Makefile.am gets mistakenly
removed by the distclean target because it's empty. Adding a
`SUBDIRS =` line prevents the removal.
This directory is being preserved as the location to add assorted
stress tests. These may include but are not limited to.
http://kernel.ubuntu.com/~cking/stress-ng/https://github.com/zfsonlinux/zfsstress/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5308
CID 147643: Type: String not null terminated
- make sure that the string is null terminated before strlen
and fprintf.
CID 152204: Type: Copy into fixed size buffer
- since strlcpy isn't availabe here, use strncpy and terminate
the string manually.
CID 49339: Type: Buffer not null terminated
- since strlcpy isn't availabe here, terminate the string
manually before fprintf.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5283
Generate a symlink in the current working directory to
test-runner.py output. This will make it easier for the
ZFS buildbot to collect logs.
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5293
Authored by: Akash Ayare <aayare@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Reviewed-by: yuxiang <guo.yong33@zte.com.cn>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Bug was caused due to a change in functionality. At some point, ZFS
snapshots no longer created associated device files which were being
used in the test. To resolve this issue, a clone of the snapshot can be
produced which will also create the expected device files; then, the
test will behave as it did historically.
OpenZFS-issue: https://www.illumos.org/issues/6877
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2200f27Closes#5275
Porting Notes:
- Hardcoded /dev/zvol/rdsk changed to $ZVOL_RDEVDIR for compatibility.
- Enabled in linux runfile.
These tests all pass once updated to wait for udev to create the
expected linked under /dev/zvol/.
Reviewed-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Reviewed-by: yuxiang <guo.yong33@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5275
In this test the 'ls -ls' command was used to print testfile size in
blocks. Because the environment variable BLOCK_SIZE was set
the 'ls -ls' command detected this and output its block count as the
number of 8192 blocks. Rather than change the variable name
the -k was was added to force ls to return 1k blocks. This has the
additional advantage of behaving consistently across platforms.
For additional details on GNU 'ls' behavior regarding block size:
https://www.gnu.org/software/coreutils/manual/html_node/Block-size.html
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5269
The zfs_receive_011_pos test can be enabled now that OpenZFS 6562
has been merged.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5276
The refquota_002_pos and refquota_004_pos test cases can pass
without modification.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5273
The zfs_snapshot_008_neg test case does not use nested pools and
can be safely enabled. The zfs_snapshot_009_pos test case is
also passing without modification.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5260
Enable reservation_012_pos, reservation_015_pos and reservation_016_pos
test cases which are passing.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5254
Enable readonly_001_pos this test is now passing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
The following new test cases need to have execute permissions set:
userquota/groupspace_003_pos.ksh
userquota/userquota_013_pos.ksh
userquota/userspace_003_pos.ksh
upgrade/upgrade_userobj_001_pos.ksh
upgrade/setup.ksh
upgrade/cleanup.ksh
The following source files accidentally were marked executable:
lib/libzpool/kernel.c
lib/libshare/nfs.c
lib/libzfs/libzfs_dataset.c
lib/libzfs/libzfs_util.c
tests/zfs-tests/cmd/rm_lnkcnt_zero_file/rm_lnkcnt_zero_file.c
tests/zfs-tests/cmd/dir_rd_update/dir_rd_update.c
cmd/zed/zed_exec.c
module/icp/core/kcf_sched.c
module/zfs/dsl_pool.c
module/zfs/arc.c
module/nvpair/nvpair.c
man/man5/zfs-module-parameters.5
Reviewed-by: GeLiXin <ge.lixin@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5241
The variable snapprops_nvlist was never initialized, so properties
were not applied to the received snapshot.
Additionally, add zfs_receive_013_pos.ksh script to ZFS test suite to exercise
'zfs receive' functionality for user properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#4338
Introduce a make recipe for flake8 to enable python
style checking. Ensure all python scripts pass flake8.
Return an error code of 0 for arcstat.py -v and
dbufstat.py -v. Add test cases for python scripts.
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ian Lee <IanLee1521@gmail.com>
Closes#5230
This patch tracks dnode usage for each user/group in the
DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode
accounting have the key prefixed with "obj-" followed by the UID/GID
in string format (as done for the block accounting).
A new SPA feature has been added for dnode accounting as well as
a new ZPL version. The SPA feature must be enabled in the pool
before upgrading the zfs filesystem. During the zfs version upgrade,
a "quotacheck" will be executed by marking all dnode as dirty.
ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
Implement tests to ensure that python scripts
that are distributed with ZFS continue to at
minimum run without errors. This will help prevent
accidental breaking of these scripts.
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
As part of its tests, filetest_001_pos.ksh wipes the entire vdev to
create checksum errors. This patch uses the setup/cleanup scripts from
the scrub_mirror test to create a custom 100MB pool, rather than
using the entire device size that is passed into zfs-tests.sh
(which defaults to 2GB). This speeds up the buildbot tests, and also
makes it possible for someone to use real disks (say, 1TB) without the
test taking an insanely long amount of time.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported by: Tony Hutter <hutter2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/4185
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee
Porting Notes:
This code is ported on top of the Illumos Crypto Framework code:
b5e030c8db
The list of porting changes includes:
- Copied module/icp/include/sha2/sha2.h directly from illumos
- Removed from module/icp/algs/sha2/sha2.c:
#pragma inline(SHA256Init, SHA384Init, SHA512Init)
- Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since
it now takes in an extra parameter.
- Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c
- Added skein & edonr to libicp/Makefile.am
- Added sha512.S. It was generated from sha512-x86_64.pl in Illumos.
- Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument.
- In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section
to not #include the non-existant endian.h.
- In skein_test.c, renane NULL to 0 in "no test vector" array entries to get
around a compiler warning.
- Fixup test files:
- Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>,
- Remove <note.h> and define NOTE() as NOP.
- Define u_longlong_t
- Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p"
- Rename NULL to 0 in "no test vector" array entries to get around a
compiler warning.
- Remove "for isa in $($ISAINFO); do" stuff
- Add/update Makefiles
- Add some userspace headers like stdio.h/stdlib.h in places of
sys/types.h.
- EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules.
- Update scripts/zfs2zol-patch.sed
- include <sys/sha2.h> in sha2_impl.h
- Add sha2.h to include/sys/Makefile.am
- Add skein and edonr dirs to icp Makefile
- Add new checksums to zpool_get.cfg
- Move checksum switch block from zfs_secpolicy_setprop() to
zfs_check_settable()
- Fix -Wuninitialized error in edonr_byteorder.h on PPC
- Fix stack frame size errors on ARM32
- Don't unroll loops in Skein on 32-bit to save stack space
- Add memory barriers in sha2.c on 32-bit to save stack space
- Add filetest_001_pos.ksh checksum sanity test
- Add option to write psudorandom data in file_write utility
coverity scan CID:147536, type: Argument cannot be negative
- may write or close fd which is negative
coverity scan CID:147537, type: Argument cannot be negative
- may call dup2 with a negative fd
coverity scan CID:147538, type: Argument cannot be negative
- may read or fchown with a negative fd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5185
These test cases fail some percentage of the time resulting
in automated testing failures. Disable the offending tests
until they can be made reliable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5201
Issue #5202Closes#5194
Because the macro ZFS_MAXPROPLEN used in function print_dataset
differs between platforms set it appropriately and calculate the expected
number of passes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5154
Enable ro_props_001_pos and onoffs_001_pos which pass reliably.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Closes#5183
The default blocksize in Linux is 1024 due to a GNU-ism. Setting the
expected blocksize resolves the issue. As mentioned in the PR an
alternate solution would be to set POSIXLY_CORRECT=1.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5167
1.coverity scan CID:147445 function zfs_do_send in zfs_main.c
Buffer not null terminated (BUFFER_SIZE_WARNING)
2.coverity scan CID:147443 function zfs_do_bookmark in zfs_main.c
Buffer not null terminated (BUFFER_SIZE_WARNING)
3.coverity scan CID:147660 function main in zinject.c
Passing string argv[0] of unknown size to strcpy
By the way, the leak of g_zfs is fixed.
4.coverity scan CID: 147442 function make_disks in zpool_vdev.c
Buffer not null terminated (BUFFER_SIZE_WARNING)
5.coverity scan CID: 147661 function main in dir_rd_update.c
passing string cp1 of unknown size to strcpy
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5130
Due to how the Linux VFS was designed busy mount points
cannot be destroyed even when given the force option. Update
the zfs_destroy_001_pos test case to expect this behavior when
running under Linux.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: candychencan <chen.can2@zte.com.cn>
Closes#5132
zfs_commands.cfg have printed "No such file or directory", When executing
script/zfs-test.sh. The script is a symlink to ../../../zfs-script-config.sh
So delete the symlink, and directly source $SRCDIR/zfs-script-config.sh
when it exists from default.cfg.in
Reviewed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: legend-hua <liu.hua130@zte.com.cn>
Closes#5133
Fix misleading error message:
"The /dev/zfs device is missing and must be created.", if /etc/mtab is missing.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Closes#4680Closes#5029
The FALLOC_FL_PUNCH_HOLE flag was introduced in the 2.6.38
kernel. To prevent breaking the build on older systems wrap its use
in a conditional. When FALLOC_FL_PUNCH_HOLE isn't available
return a non-zero status and error message.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: legend-hua <liu.hua130@zte.com.cn>
Closes#5101
This test cause frequently triggers issue #4034. Disable this
test case until the root cause of this issue has been addressed.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4034Closes#5120
Author: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Don Brady <don.brady@intel.com>
OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dcbf3bd6
Delphix-commit: https://github.com/delphix/delphix-os/commit/978ed49Closes#4929
ZFS Test Suite Performance Regression Tests
This was pulled into OpenZFS via the compressed arc featureand was
separated out in zfsonlinux as a separate pull request from PR-4768.
It originally came in as QA-4903 in Delphix-OS from John Kennedy.
Expected Usage:
$ DISKS="sdb sdc sdd" zfs-tests.sh -r perf-regression.run
Porting Notes:
1. Added assertions in the setup script to make sure required tools
(fio, mpstat, ...) are present.
2. For the config.json generation in perf.shlib used arcstats and
other binaries instead of dtrace to query the values.
3. For the perf data collection:
- use "zpool iostat -lpvyL" instead of the io.d dtrace script
(currently not collecting zfs_read/write latency stats)
- mpstat and iostat take different arguments
- prefetch_io.sh is a placeholder that uses arcstats instead of
dtrace
4. Build machines require fio, mdadm and sysstat pakage (YMMV).
Future Work:
- Need a way to measure zfs_read and zfs_write latencies per pool.
- Need tools to takes two sets of output and display/graph the
differences
- Bring over additional regression tests from Delphix
When using real devices, specify DISKS="sdb sdc sdd" opposed to
/dev/sdb in zfs-tests.sh - otherwise errors with directory names and
disk names registering as "/dev//dev/sdb" for some tests. The same
goes for mpath: DISK="mpatha mpathad mpathb"
Expected Usage:
$ DISKS="sdb sdc sdd" zfs-tests.sh
SLICE_PREFIX is now set as "p" for a loop device (ie loop0p2) or
"" for a real device (ie sdb2), or either for multipath devices
(ie mpatha1 or mpath1p1) instead of only "p" by default. Note that
kpartx partitioning is not currently supported in this patch
(ie "partx") and may need to be disabled on Debian distributions.
Functions added for determining test directory (/dev or /dev/mapper)
as well as slice prefix are determined and exported mostly in the cfg
file of each test group directory.
Currently zpools cannot be created on whole mpath devices that have
been partitioned. In order to fix this tests have either been revised
to use a partition instead, or if there is a size constraint and the
pool needs to be created on the whole disk, partitions are then deleted
if the device is a multipath device. This functionality is added to
default_cleanup() or to individual cleanup scripts if a non-default
cleanup method is used.
The max partitions is currently set at 8 to account for all of the
tests thus far.
Patch changes are generally encompassed in "if is_linux" construct.
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Reviewed-by: John Salinas <John.Salinas@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Closes#4447Closes#4964Closes#5074
The argument processing is zhack makes the assumption that getopt()
will not permute argv. This isn't true for the GNU implementation of
getopt() unless the optstring is prefixed with a '+'. In which case
this is equivalent to setting the POSIXLY_CORRECT environment variable
In addition, update the usage() and optstrings to reflect the existing
supported options.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: liaoyuxiangqin <guo.yong33@zte.com.cn>
Closes#5047
Older versions of blkid may not promptly detect ZFS labels when
they're located on partitions. In order to ensure this test passes
reliably always perform a scan of default search paths (-s).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: liaoyuxiangqin <guo.yong33@zte.com.cn>
Closes#4987Closes#5047
Issues:
Under Linux, when executing zfs_destroy_004.ksh destroy $fs is an
error. The key issue here is that illumos kernel treats this case
differently than the Linux kernel. On illumos you can unmount and
destroy a filesystem which is busy and all consumers of it get EIO.
On Linux the expected behavior is to prevent the unmount and destroy.
Cause analysis:
When create $fs file system and mount file system to $mntp.
cd $mntp, linux isn't allow to destroy $fs in this mount contents.
No matter what destroy with parameters.
Solution:
So log_mustnot $ZFS destroy $fs is ok.
cd $olddir and destroy $fs.
Signed-off-by: caoxuewen cao.xuewen@zte.com.cn
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5012
As the scripts zfs_create_003_pos.ksh and zfs_create_006_pos.ksh can
run successfully in the linux, add them to the <linux.run> file to
increase test scene.
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5002
Add helpers which automatically retry the provided command when
the error message matches the provided keyword. This provides an
easy way to handle the asynchronous nature of some ZFS commands.
For example, the `zfs destroy` command may need to be retried in
the case where the block device is unexpected busy. This can be
accomplished as follows:
log_must_busy $ZFS destroy ...
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5002
Update zfs_mount_005_pos.ksh and zfs_mount_010_neg.ksh to reflect
the expected Linux behavior. The is_linux wrapper is used so the
test case may be used on Linux and non-Linux platforms.
Signed-off-by: liuhuang <liu.huang@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5000
Just cleanup the new fs created during the test, so the "$found"
should be "true".
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4978
From the man page of dirname: " Both dirname() and basename()
may modify the contents of path, so it may be desirable to pass
a copy when calling one of these functions." And in fact on linux
using dirname actually changes the contents of the passed parameter as
evident from the following failure when running the ctime test:
link(/root/zfs-mount, /root/zfs-mount/link_file)
Fix this by creating a copy of the input parameter and passing that
to dirname, thus not compromising the original parameter, allowing
the creation of hard link to succeed.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4977
Updated test case history_001_pos.ksh so it can run in tree. The
original test case assumed /usr/sbin/zfs and /usr/sbin/zpool were
the only valid locations for these utilities. The same modification
has already been made too history_common.kshlib.
The only other failing test case was history_010_pos and that was
the result of the ":linux" suffix not being appended when checking
the long output in the test case.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4882
Creating the pool in a striped rather than mirrored configuration
provides enough space for all upgrade tests to run. Test case
zpool_upgrade_007_pos still fails and must be investigated so
it has been left disabled.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4852
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Calling dsl_dataset_name on a dataset with a 256 byte buffer is asking
for trouble. We should check every dataset on import, using a 1024 byte
buffer and checking each time to see if the dataset's new name is longer
than 256 bytes.
OpenZFS-issue: https://www.illumos.org/issues/6876
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ca8674e
Authored by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6562
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5f7a8e6
LOLi
Olaf Faaland
Dan Kimmel
Tony Hutter
George Melikov
Richard Yao
Giuseppe Di Natale
Brian Behlendorf
Yuri Pankov
Giuseppe Di Natale
Toomas Soome
John Wren Kennedy
Sydney Vanda
Tom Matthews
Ahmed G
Prakash Surya
Matthew Ahrens
Hans Rosenfeld
Akash Ayare
Yuri Pankov
Igor Kozhukhov
Marcel Telka
Simon Klinkert
Don Brady
Tim Crawford
Chunwei Chen
ka7
Chunwei Chen
ChaoyuZhang
legend-hua
GeLiXin
cao
liaoyuxiangqin
Jinshan Xiong
candychencan
luozhengzheng
slashdd
Paul Dagnelie
liuhuang
Nikolay Borisov
Gvozden Neskovic
Dan McDonald