- Enable builds for powerpc ISA type.
- Add DIV_ROUND_UP and roundup macros if unavailable.
- Cast 64-bit values for %lld format string to (long long) to
quiet compile warning.
- Configure check, the div64_64() function was renamed to
div64_u64() as of 2.6.26.
- Configure check, the global_page_state() fuction was introduced
in 2.6.18 kernels. The earlier 2.6.16 based SLES10 must not try
and use it, thankfully get_zone_counts() is still available.
- To simplify debugging poison all symbols aquired dynamically
using spl_kallsyms_lookup_name() with SYMBOL_POISON.
- Add console messages when the user mode helpers fail.
- spl_kmem_init_globals() use bit shifts instead of division.
- When the monotonic clock is unavailable __gethrtime() must perform
the HZ division as an 'unsigned long long' because the SPL only
implements __udivdi3(), and not __divdi3() for 'long long' division
on 32-bit arches.
We need dependent packages to be able to include spl_config.h so they
can leverage the configure checks the SPL has done. This is important
because several of the spl headers need the results of these checks to
work properly. Unfortunately, the autoheader build product is always
private to a particular build and defined certain common things.
(PACKAGE, VERSION, etc). This prevents other packages which also use
autoheader from being include because the definitions conflict. To
avoid this problem the SPL build system leverage AH_BOTTOM to include
a spl_unconfig.h at the botton of the autoheader build product. This
custom include undefs all known shared symbols to prevent the confict.
This does however mean that those definition are also not availble
to the SPL package either. The SPL package therefore uses the
equivilant SPL_META_* definitions.
In the interests of portability I have added a FC10/i686 box to
my list of development platforms. The hope is this will allow me
to keep current with upstream kernel API changes, and at the same
time ensure I don't accidentally break x86 support. This patch
resolves all remaining issues observed under that environment.
1) SPL_AC_ZONE_STAT_ITEM_FIA autoconf check added. As of 2.6.21
the kernel added a clean API for modules to get the global count
for free, inactive, and active pages. The SPL attempts to detect
if this API is available and directly map spl_global_page_state()
to global_page_state(). If the full API is not available then
spl_global_page_state() is implemented as a thin layer to get
these values via get_zone_counts() if that symbol is available.
2) New kmem:vmem_size regression test added to validate correct
vmem_size() functionality. The test case acquires the current
global vmem state, allocates from the vmem region, then verifies
the allocation is correctly reflected in the vmem_size() stats.
3) Change splat_kmem_cache_thread_test() to always use KMC_KMEM
based memory. On x86 systems with limited virtual address space
failures resulted due to exhaustig the address space. The tests
really need to problem exhausting all memory on the system thus
we need to use the physical address space.
4) Change kmem:slab_lock to cap it's memory usage at availrmem
instead of using the native linux nr_free_pages(). This provides
additional test coverage of the SPL Linux VM integration.
5) Change kmem:slab_overcommit to perform allocation of 256K
instead of 1M. On x86 based systems it is not possible to create
a kmem backed slab with entires of that size. To compensate for
this the number of allocations performed in increased by 4x.
6) Additional autoconf documentation for proposed upstream API
changes to make additional symbols available to modules.
7) Console error messages added when spl_kallsyms_lookup_name()
fails to locate an expected symbol. This causes the module to fail
to load and we need to know exactly which symbol was not available.
I'm very surprised this has not surfaced until now. But the taskq_wait()
implementation work only wait successfully the first time it was called.
Subsequent usage of taskq_wait() on the taskq would not wait.
The issue was caused by tq->tq_lowest_id being set to MAX_INT after the
first wait completed. This caused subsequent waits which check that the
waiting id is less than the lowest taskq id to always succeed. The fix
is to ensure that tq->tq_lowest_id is never set larger than tq->tq_next.id.
Additional fixes which were added to this patch include:
1) Fix a race by placing the taskq_wait_check() in the tq->tq_lock spinlock.
2) taskq_wait() should wait for the largest outstanding id.
3) Multiple spelling corrections.
4) Added taskq wait regression test to validate correct behavior.
Mainly for portability reasons I have rebased the mutex tests on Solaris
taskqs instead of linux work queues. The linux workqueue API changed post
2.6.18 kernels and using task queues avoids having to conditionally detect
which workqueue API to use.
Additionally, this is basically free additional testing for the task queues.
Much to my surprise after updating these test cases they did expose a long
standing bug in the taskq_wait() implementation. This patch does not
address that issue but the followup patch does.
An update to the build system to properly support all commonly
used Makefile targets these include:
make all # Build everything
make install # Install everything
make clean # Clean up build products
make distclean # Clean up everything
make dist # Create package tarball
make srpm # Create package source RPM
make rpm # Create package binary RPMs
make tags # Create ctags and etags for everything
Extra care was taken to ensure that the source RPMs are fully
rebuildable against Fedora/RHEL/Chaos kernels. To build binary
RPMs from the source RPM for your system simply run:
rpmbuild --rebuild spl-x.y.z-1.src.rpm
This will produce two binary RPMs with correct 'requires'
dependencies for your kernel. One will contain all spl modules
and support utilities, the other is a devel package for compiling
additional kernel modules which are dependant on the spl.
spl-x.y.z-1_<kernel version>.x86_64.rpm
spl-devel-x.y.2-1_<kernel version>.x86_64.rpm
Accidentally leaked list item li in error path. The fix is to
adjust this error path to ensure the allocated list item which
has not yet been added to the list gets freed. To do this we
simply add a new goto label slightly earlier to use the existing
cleanup logic and minimize the number of unique return points.
This was a false positive the callpath being walked is impossible
because the splat_kmem_cache_test_kcp_alloc() function will ensure
kcp->kcp_kcd[0] is initialized to NULL. However, there is no harm
is making this explicit for the test case so I'm adding a line to
clearly set it to correct the analysis.
- Added SPL_AC_3ARGS_ON_EACH_CPU configure check to determine
if the older 4 argument version of on_each_cpu() should be
used or the new 3 argument version. The retry argument was
dropped in the new API which was never used anyway.
- Updated work queue compatibility wrappers. The old way this
worked was to pass a data point when initialized the workqueue.
The new API assumed the work item is embedding in a structure
and we us container_of() to find that data pointer.
- Updated skc->skc_flags to be an unsigned long which is now
type checked in the bit operations. This silences the warnings.
- Updated autogen products and splat tests accordingly
- Added slab work queue task which gradually ages and free's slabs
from the cache which have not been used recently.
- Optimized slab packing algorithm to ensure each slab contains the
maximum number of objects without create to large a slab.
- Fix deadlock, we can never call kv_free() under the skc_lock. We
now unlink the objects and slabs from the cache itself and attach
them to a private work list. The contents of the list are then
subsequently freed outside the spin lock.
- Move magazine create/destroy operation on to local cpu.
- Further performace optimizations by minimize the usage of the large
per-cache skc_lock. This includes the addition of KMC_BIT_REAPING
bit mask which is used to prevent concurrent reaping, and to defer
new slab creation when reaping is occuring.
- Add KMC_BIT_DESTROYING bit mask which is set when the cache is being
destroyed, this is used to catch any task accessing the cache while
it is being destroyed.
- Add comments to all the functions and additional comments to try
and make everything as clear as possible.
- Major cleanup and additions to the SPLAT kmem tests to more
rigerously stress the cache implementation and look for any problems.
This includes correctness and performance tests.
- Updated portable work queue interfaces
Brian Behlendorf